Proprietary InformationThe information contained in this document is the property of ARTESYN EMBEDDED TECHNOLOGIES. Except as specificallyrequested in writing by ARTESYN EMBEDDED TECHNOLOGIES, the holder of this document: (1) shall keep all information containedherein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties and (2) shall usesame for operating and maintenance purposes only.

Form No. ARTESYN/RE/FORM005A

Reliability EngineeringPhilippines

DESIGN RELIABILITY VERIFICATION REPORT

Date Released June 24, 2016 Reference Number RE-PH15/201B

Model No.73-936-0048(iHP Module)

Manufacturing Site Laguna

Product Spec Rev Rev.06Product SpecRelease Date

05-07-2015

BOM Release Date 10/25/2015 Schematic Rev A

Sample Size See page 4 Product Rev DVT

Name/s Signature Date

Issued by Napoleon N. Lanto 06/24/2016

Approved by Jet Bautista 06/24/2016

Circulation

Team Name/s

Design Team EW-01(EE) Ricardo Roldan, Louie Cuevas(ME) Jonathan Cudal, Angelito Hatol

Design Management Nonoy Neri, Peter Fernandes

Program Management Rowena Legaspi, Dan Soliman, Scott Ireland

Reliability EngineeringJet Bautista, Lito Baldo, Reggie Quinto, MP JohnLau

Revision Control

Revision Change History DateA First Release 11/29/2015B Update test remarks for section 1.3 & 2.1 06/24/2016

PASSED

Model No.: 73-936-0048

Report Ref. No.: RE- PH15/201B

Form No. ARTESYN/FORM005A Page 2 of 10

REPORT CONTENTS

Test Result Summary and Conclusion ...............................................................................................3References:............................................................................................................................................4TEST DETAILS.......................................................................................................................................51.0 Reliability Test..............................................................................................................................5

1.1 ELECTROLYTIC CAPACITOR LIFE ESTIMATION ...................................................................51.2 OPTO-COUPLER CTR MARGIN CALCULATION....................................................................61.3 COMPONENT STRESS ANALYSIS..........................................................................................7

1.3.1 Thermal Stress Measurement ...............................................................................................71.3.2 Electrical Stress Measurement ..............................................................................................8

2.0 Robustness Test .........................................................................................................................92.1 HIGH TEMPERATURE STRESS TEST (HTST)........................................................................9

Appendix ..............................................................................................................................................10

Model No.: 73-936-0048

Report Ref. No.: RE- PH15/201B

Form No. ARTESYN/FORM005A Page 3 of 10

Test Result Summary and Conclusion

TESTDRV Result

(P-Pass / F-Fail /NR-Not Required)

1.0 Reliability Test

1.1 Electrolytic Capacitor Life Prediction P

1.2 Opto-coupler CTR Margin Calculation P

1.3 Component Stress Analysis (DSA / WCSA)

1.3.1 Thermal Stress Measurement P

1.3.2 Electrical Stress Measurement P

2.0 Robustness Test

2.1 High Temperature Stress Test (HTST) Refer to 73-959-0001 HTST

3.0 Appendix

Test Report ConclusionThis product had completed the DRV tests as outlined in thisreport. Based on the test results depicted in this report, theproduct passed the DRV test.

Model No.: 73-936-0048

Report Ref. No.: RE- PH15/201B

Form No. ARTESYN/FORM005A Page 4 of 10

References:1. Product Specifications: iHP Product Specificaton rev 06 Draft Rev.062. DRV Test Plan No. QAP-1146/PH3. Design Derating Requirements 920-0001144. Design Reliability Verification 920-0000955. Schematic Diagram 710-021500-0001 Rev.A6. PCB Artwork P/Ns: 509-021501-0002 Rev.A

SAMPLE UNIT SUMMARY

SampleUnit #

Serial # Date Code Firmware Product Revision

1 Unit 1 n/a 2.12 DVT

2 Unit 2 n/a 2.12 DVT

3 Unit 3 n/a 2.12 DVT

Model No.: 73-936-0048

Report Ref. No.: RE- PH15/201B

Tested by: Napoleon Lanto Test Date: 11/15/2015Form No. ARTESYN/RE/FORM005A Page 5 of 10

TEST DETAILS

1.0 Reliability Test

1.1 Electrolytic Capacitor Life Estimation

Reference DocumentReliability Test Instruction 920-000098

Test Location RE Eastwood

Test Conditions Input Voltage 380-480 Volts

Output Power 2400 Watts

Loading Conditions 48V/50A

Ambient Temp 30 C

Cooling Forced Air

Test EquipmentDescription Model No. Equip No.

Calibration DueDate

Chroma 63203 QAE-573 9/29/2016

Tektronix Oscilloscope DPO 5034B QAE-587 6/8/2016

TTI DMM 1705 QAE-391 8/27/2016

Chroma 62150H-1000S QAE-533 9/15/2016

ESPEC Chamber PSL-2K QAE-231 4/15/2016

Test Sample Serial Nos. Sample 1, Sample 2

Date Code See page 4

Product Useful Life / Cap Life Expectancy 87,600 Hours

Test ResultsAll Electrolytic capacitor meets life expectancy

Test Remarks

Based on above test results, calculated E-cap prediction result meets LifeExpectancy requirement. See E-cap Life calculation data on Appendix.

Model No.: 73-936-0048

Report Ref. No.: RE- PH15/201B

Tested by: Napoleon Lanto Test Date: 11/25/2015Form No. ARTESYN/RE/FORM005A Page 6 of 10

1.2 Opto-coupler CTR Margin Calculation

Reference DocumentReliability Test Instruction 920-000098

Test Location RE Eastwood

Test Conditions Input Voltage 342Vac Volts

Output Power 300 Watts

Loading Conditions 48V/62.5A

Ambient Temp 50 C

Cooling Forced Air

Test EquipmentDescription Model No. Equip No.

Calibration DueDate

Chroma 63203 QAE-573 9/29/2016

Tektronix Oscilloscope DPO 5034B QAE-587 6/8/2016

TTI DMM 1705 QAE-391 8/27/2016

Chroma 62150H-1000S QAE-533 9/15/2016

ESPEC Chamber PSL-2K QAE-231 4/15/2016

Test Sample Serial Nos. Sample 1, Sample 2

Date Code See page 4

Product Useful Life 10 Years

Test Results Opto coupler U809 has the lowest CTR margin of 488.08%

Refer to the attachment at the appendix section for details.

Test Remarks

Passed

Model No.: 73-936-0048

Report Ref. No.: RE- PH15/201B

Tested by: Napoleon Lanto Test Date: 11/25/2015Form No. ARTESYN/RE/FORM005A Page 7 of 10

1.3 Component Stress Analysis

1.3.1 Thermal Stress Measurement

Reference Document Reliability Test Instruction 920-000098

Test Location RE Eastwood

Test Conditions Input Voltage 342-519Vac Volts

Output Power 3000 Watts

Loading Condition 48V/62.5A

Ambient Temp 50 C

Cooling Forced Air

Test EquipmentDescription Model No. Equipment No.

Calibration DueDate

Chroma 63203 QAE-573 9/29/2016

ESPEC Chamber PSL-2K QAE-231 4/15/2016

TTI DMM 1705 QAE-391 8/27/2016

Chroma 62150H-1000S QAE-533 9/15/2016

Test Sample Serial Nos. Sample 1, Sample 2

Date Code See page 4

Test Results

All components are found within Artesyn Component Thermal DeratingRequirement.

Test RemarksBased on the above test results, the product passed passed the ThermalDerating CSA / Worst-Case CSA. See CSA test data on Appendix.

Model No.: 73-936-0048

Report Ref. No.: RE- PH15/201B

Tested by: Napoleon Lanto Test Date: 11/25/2015Form No. ARTESYN/RE/FORM005A Page 8 of 10

1.3.2 Electrical Stress Measurement

Reference Document Reliability Test Instruction 920-000098

Test Location RE Eastwood

Test Conditions Input Voltage 400Vdc Volts

Output Power 3000 Watts

Loading Condition 48V/62.5A

Ambient Temp 25 C

Cooling Forced Air

Test EquipmentDescription Model No. Equipment No.

Calibration DueDate

Chroma 63203 QAE-573 9/29/2016

Tektronix Oscilloscope DPO 5034B QAE-587 6/8/2016

TTI DMM 1705 QAE-391 8/27/2016

Chroma 62150H-1000S QAE-533 9/15/2016

Test Sample Serial Nos. Sample 1, Sample 2

Date Code See page 4

Test Results All components are found within Artesyn Component Electrical DeratingRequirement.

Test RemarksBased on the above test results, the product passed the Electrical Derating CSA/ Worst-Case CSA. See CSA test data on Appendix.

Model No.: 73-936-0048

Report Ref. No.: RE- PH15/201B

Tested by: Napoleon Lanto Test Date: 10/24/2015Form No. ARTESYN/RE/FORM005A Page 9 of 10

2.0 Robustness Test

2.1 High Temperature Stress Test (HTST) refer to 73-959-0001 HTST

Reference Document Robustness Test Instruction 920-000099-0000Test Location RE EastwoodTest Conditions Input Voltage 400Vdc (4days) Volts

Output Power 3000 WattsAmbient Temperature 50+15+10 CCooling Forced Air by system box (Fan 19.8cfm)

Test EquipmentDescription Model No. Equipment No.

Calibration DueDate

Chroma DC source 62150H-1000S QAE-538 9/14/2016Chroma E-load 63203 TM15-170 3/6/2016ESPEC Chamber PSL-2K QAE-231 4/14/2016

Test Sample Serial No. Sample 3Date Code See page 4

1.) Load CyclingTest Output Loading

Min Load 0 A

Full Load 62.5 A

Cycling Sequence 16 hours FL, 8 hours MLDuration 96 hours

2.) Output ShortCircuit Test

Input Line On all the timeOutput ML then, short output to common, repeat 10X.

Test ResultsRefer to 73-959-0001 HTST

Failure Analysis(Yes/NR)

NA

Test remarksBased on above test results, Sample unit survived HTST.

Model No.: 73-936-0048

Report Ref. No.: RE- PH15/201B

Form No. ARTESYN/RE/FORM005A Page 10 of 10

Appendix

Attachment Revision File Name

Rev A 73-936-0048 E-cap Life Calculator Rev15.1.xls

Rev A 73-936-0048 DVT DSA @ 50C rev A.xlsx

Rev A 73-936-0048 DVT Opto CTR Calculation.xls

Cover Page

ARTESYN Embedded Technologies

Reliability Engineering

Eastwood/AIL-PB

E-cap Life Calculation REPORT

MODEL # :73-936-0048 (iHP 48V Module)

CUSTOMER :Standard

DESIGN TEAM :EW-1

BOM Release Date :October 25, 2015

Schematic Diagram :Rev. 01

Derating Document :Emerson Design Derating Requirements revAB / 920-000114-0000

Sample Build :DVT

Report Number Reference:RE-PH15/201

Name/sSignatureDate

PREPARED BY :Napoleon N. Lanto11/30/15

APPROVED BY:Jet Bautista11/30/15

CIRCULATION :

Design Team(EE) Ricardo Roldan, Louie Cuevas(ME) Jonathan Cudal, Angelito Hatol

Program MgmtRowena Legaspi, Dan Soliman, Peter Warren

Reliability Eng'gJet Bautista, Lito Baldo, Reggie Quinto, MP John Lau

REV CONTROLDATEREVCHANGES

11/30/15AInitial Release

Summary

E-CAP LIFE ESTIMATION

E-CAP Formula RevisionRev. 15.1BOM Revision DateOctober 25, 2015

Model # and Revision:73-936-0048Ouput Power Rating2400Watts

Test DateNovember 22, 2015Input Voltage380-480Vac

PSU Serial NumberUnit1 & 2Loading Condition48V/50A

End of Life Requirement87600 hoursTest Temperature30C

Tested ByNapoleon Lanto

PARTPart NumberCircuit CodeDescriptionTypeVendorVratedDiam x Ht (mm)Cap. (uF)Rated ripple current (mA)Rated life (hrs)Rated Temp. (C)Measured ripple current (mA)Measured Temp. (C) @380VacMeasured Temp. (C) @480VacEstimated Life (KHrs) @380VacEstimated Life (KHrs) @480VacEstimated lifetime (yrs)Estimated Life (KHrs) w/ 18Hrs per day dutyEstimated lifetime (yrs) w/ 18Hrs per day duty

PRIME201-018377-0277C1CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLHrubycon8012.5x20270143010000105420.0047.645.8131,400.00131,400.0015.0175,200.0020.0

SUB201-018377-0277C1CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYBncc8012.5x20270143010000105420.0047.645.8131,400.00131,400.0015.0175,200.0020.0

PRIME201-018377-0277C2CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLHrubycon8012.5x20270143010000105433.0049.947.9131,400.00131,400.0015.0175,200.0020.0

SUB201-018377-0277C2CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYBncc8012.5x20270143010000105433.0049.947.9131,400.00131,400.0015.0175,200.0020.0

PRIME201-018377-0277C3CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLHrubycon8012.5x20270143010000105420.0052.950.9131,400.00131,400.0015.0175,200.0020.0

SUB201-018377-0277C3CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYBncc8012.5x20270143010000105420.0052.950.9131,400.00131,400.0015.0175,200.0020.0

PRIME201-018377-0277C4CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLHrubycon8012.5x20270143010000105433.0047.445.7131,400.00131,400.0015.0175,200.0020.0

SUB201-018377-0277C4CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYBncc8012.5x20270143010000105433.0047.445.7131,400.00131,400.0015.0175,200.0020.0

PRIME201-018377-0277C5CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLHrubycon8012.5x20270143010000105420.004947.1131,400.00131,400.0015.0175,200.0020.0

SUB201-018377-0277C5CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYBncc8012.5x20270143010000105420.004947.1131,400.00131,400.0015.0175,200.0020.0

PRIME201-018377-0277C8CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLHrubycon8012.5x20270143010000105422.0053.351.3131,400.00131,400.0015.0175,200.0020.0

SUB201-018377-0277C8CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYBncc8012.5x20270143010000105422.0053.351.3131,400.00131,400.0015.0175,200.0020.0

PRIME201-015773-0157C9CAP,ELECT,LOW IMP,150F,25VDC,20%,-20%ZLHrubycon256.3x1115054060001052.4153.351.3131,400.00131,400.0015.0175,200.0020.0

SUB201-015773-0157C9CAP,ELECT,LOW IMP,150F,25VDC,20%,-20%KZMncc256.3x1115054060001052.4153.351.3131,400.00131,400.0015.0175,200.0020.0

PRIME201-018339-0127C912CAP,ELECT,POLY,120F,16VDC,20%,-20%PXSncc168x6.3120290050001055.0057.655.7131,400.00131,400.0015.0175,200.0020.0

SUB201-018339-0127C912CAP,ELECT,POLY,120F,16VDC,20%,-20%OVKlelon168x6.3120280050001055.0057.655.7131,400.00131,400.0015.0175,200.0020.0

JaniceMarieZapiter:K465N3003EAPP (Rev AP) - HTST

Rubycon

CAP.Manufacturer: Rubycon

Formula1 : General type.

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLoTmaxTjoCITcFLConclusionTaTjA

Rated ripple current (mA)Rated life (Khrs)Rated Temp. (C)Rated internal temp. rise(C)Constant valueTemp. rise ratioAir cooling coefficientMeasured ripple current (mA)Measured case temp.(C)Freq. CoeffEstimated lifetime (khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILCalculated ambient temp.(C)Actual core temp. rise (C)Ripple acceleration coefficient

201-018377-0277C1CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLH12.5x2027014301010550.5711.11420.0047.601.00131.415.03.847.570.439.96

201-018377-0277C2CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLH12.5x2027014301010550.5711.11433.0049.901.00131.415.03.8PASS49.860.469.96

201-018377-0277C3CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLH12.5x2027014301010550.5711.11420.0052.901.00131.415.03.8PASS52.870.439.96

201-018377-0277C4CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLH12.5x2027014301010550.5711.11433.0047.401.00131.415.03.8PASS47.360.469.96

201-018377-0277C5CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLH12.5x2027014301010550.5711.11420.0049.001.00131.415.03.8PASS48.970.439.96

201-018377-0277C8CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLH12.5x2027014301010550.5711.11422.0053.301.00131.415.03.8PASS53.270.449.96

201-015773-0157C9CAP,ELECT,LOW IMP,150F,25VDC,20%,-20%ZLH6.3x11150540610550.571112.4153.301.00131.415.03.8PASS53.300.0010.00

Formula1 : General type.

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLoTmaxTjoCITcFLConclusionTaTjA

Rated ripple current (mA)Rated life (Khrs)Rated Temp. (C)Rated internal temp. rise(C)Constant valueTemp. rise ratioAir cooling coefficientMeasured ripple current (mA)Measured case temp.(C)Freq. CoeffEstimated lifetime (khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILCalculated ambient temp.(C)Actual core temp. rise (C)Ripple acceleration coefficient

201-018377-0277C1CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLH12.5x2027014301010550.5711.11420.0045.801.00131.415.03.845.770.439.96

201-018377-0277C2CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLH12.5x2027014301010550.5711.11433.0047.901.00131.415.03.8PASS47.860.469.96

201-018377-0277C3CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLH12.5x2027014301010550.5711.11420.0050.901.00131.415.03.8PASS50.870.439.96

201-018377-0277C4CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLH12.5x2027014301010550.5711.11433.0045.701.00131.415.03.8PASS45.660.469.96

201-018377-0277C5CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLH12.5x2027014301010550.5711.11420.0047.101.00131.415.03.8PASS47.070.439.96

201-018377-0277C8CAP,ELECT,LIMPD,270F,80VDC,20%,-20%ZLH12.5x2027014301010550.5711.11422.0051.301.00131.415.03.8PASS51.270.449.96

201-015773-0157C9CAP,ELECT,LOW IMP,150F,25VDC,20%,-20%ZLH6.3x11150540610550.571112.4151.301.00131.415.03.8PASS51.300.0010.00

SunnyLi:If Ta lower than 65C,Ta should be 65C

SunnyLi:If Ta lower than 65C,Ta should be 65C

NCC

CAP.Manufacturer: NCC

Le for Conductive Polymer Aluminum Solid Capacitors:

Formula1: Radial: KZM, KZH, KZE, KY, LZA, LXZ, LXY, LXV, KXJ, KXG, FL, LGB, KMQ, PAG, KLG, KMG, KMH, KLJ, SMH, KZN,KWA,KHE Snap-in: LXM, LXS, LXQ, LXG, LXH, KMH, KMS, KMM, KMW, KMR(CST), KMQ, KLM, CHA, KMT, KMV, 81D, SMQ, SMM, SLM, SMH

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLrToKtToImTcKfLxConclusionLx'TxTIx

Rated ripple current (mA)Rated life (Khrs)Rated Temp. (C)Temp. Slope correction factorRated internal temp. rise(C)Measured ripple current (mA)Measured case temp.(C)Freq. CoeffEstimated lifetime (Khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILCalculated lifetime (Khrs)Calculated ambient temp.(C)Actual internal temp. rise (C)Actual ripple current (mA)

201-018377-0277C1CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYB12.5x202701430101051.23420.0047.60113115.04479347.380.26420.00

201-018377-0277C2CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYB12.5x202701430101051.23433.0049.90113115.044PASS67649.670.28433.00

201-018377-0277C3CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYB12.5x202701430101051.23420.0052.90113115.044PASS54952.680.26420.00

201-018377-0277C4CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYB12.5x202701430101051.23433.0047.40113115.044PASS80347.170.28433.00

201-018377-0277C5CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYB12.5x202701430101051.23420.0049.00113115.044PASS72048.780.26420.00

201-018377-0277C8CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYB12.5x202701430101051.23422.0053.30113115.044PASS53453.080.26422.00

201-015773-0157C9CAP,ELECT,LOW IMP,150F,25VDC,20%,-20%KZM6.3x1115054061051.122.4153.30113115.044PASS28553.300.002.41

Formula2: Surface Mount: MVS, MVA, MV, MVE, MVK, MZJ, MZA, MVY, MZF, MZE, MZK, MLA, MLF, MLE, MLK, MVL, MVJ, MKB, MVK-BP, MV-BP, Radial: SRM, SRE, KRE, SRA, SRE-BP, KRE-BP, KMA-BP, SRA-BP, KMA, KME-BP, KRG, SRG(Length ==12.5mm),

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLoToKtToImTcKfLxConclusionLx'TxTIx

Rated ripple current (mA)Rated life (Khrs)Rated Temp. (C)Temp. Slope correction factorRated internal temp. rise(C)Measured ripple current (mA)Measured case temp.(C)Freq. CoeffEstimated lifetime (Khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILCalculated lifetime (Khrs)Calculated ambient temp.(C)Actual internal temp. rise (C)Actual ripple current (mA)

10021051.655100451799.044PASS7941.975.00100.00

Formula3: Surface Mount high tmeperature products(125C): MVH, MHB,

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLoToKtToImTcKfLxConclusionLx'TxTIx

Rated ripple current (mA)Rated life (Khrs)Rated Temp. (C)Temp. Slope correction factorRated internal temp. rise(C)Measured ripple current (mA)Measured case temp.(C)Freq. CoeffEstimated lifetime (Khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILCalculated lifetime (Khrs)Calculated ambient temp.(C)Actual internal temp. rise (C)Actual ripple current (mA)

10011051.655100551576.544PASS5751.975.00100.00

Formula4: Radial high temperature products(125C): GXE, GXL, GPA,

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLrToKtToImTcKfLxConclusionLx'TxTIx

Rated ripple current (mA)Rated life (Khrs)Rated Temp. (C)Temp. Slope correction factorRated internal temp. rise(C)Measured ripple current (mA)Measured case temp.(C)Freq. CoeffEstimated lifetime (Khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILCalculated lifetime (Khrs)Calculated ambient temp.(C)Actual internal temp. rise (C)Actual ripple current (mA)

10031051.65510055113115.044PASS34251.975.00100.00

Formula5: Radial high temperature products(135C): GXH

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLrToKtToImTcKfLxConclusionLx'TxTIx

Rated ripple current (mA)Rated life (Khrs)Rated Temp. (C)Temp. Slope correction factorRated internal temp. rise(C)Measured ripple current (mA)Measured case temp.(C)Freq. CoeffEstimated lifetime (Khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILCalculated lifetime (Khrs)Calculated ambient temp.(C)Actual internal temp. rise (C)Actual ripple current (mA)

10021051.65510048113115.0PASS55644.975.00100.00

Formula6: Conductive Polymer Aluminum, To=20C for these capacitors.

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLeToToKtBtImTaKfLxConclusionLx'TxIx

Rated ripple current (mA)Effective life time (Khrs)Rated Temp. (C)Rated internal temp. rise(C)Temp. Slope correction factorTemp. acceleration factor 2Measured ripple current (mA)Measured ambient temp.(C)Freq. CoeffEstimated lifetime (Khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILCalculated lifetime (Khrs)Actual internal temp. rise(C)Actual ripple current (mA)

201-018339-0127C912CAP,ELECT,POLY,120F,16VDC,20%,-20%PXS8x6.312029005105201.12557.6113115.044PASS1340.005.00

Formula1: Radial: KZM, KZH, KZE, KY, LZA, LXZ, LXY, LXV, KXJ, KXG, FL, LGB, KMQ, PAG, KLG, KMG, KMH, KLJ, SMH, KZN,KWA,KHE Snap-in: LXM, LXS, LXQ, LXG, LXH, KMH, KMS, KMM, KMW, KMR(CST), KMQ, KLM, CHA, KMT, KMV, 81D, SMQ, SMM, SLM, SMH

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLrToKtToImTcKfLxConclusionLx'TxTIx

Rated ripple current (mA)Rated life (Khrs)Rated Temp. (C)Temp. Slope correction factorRated internal temp. rise(C)Measured ripple current (mA)Measured case temp.(C)Freq. CoeffEstimated lifetime (Khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILCalculated lifetime (Khrs)Calculated ambient temp.(C)Actual internal temp. rise (C)Actual ripple current (mA)

201-018377-0277C1CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYB12.5x202701430101051.23420.0045.80113115.04489945.580.26420.00

201-018377-0277C2CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYB12.5x202701430101051.23433.0047.90113115.044PASS77647.670.28433.00

201-018377-0277C3CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYB12.5x202701430101051.23420.0050.90113115.044PASS63150.680.26420.00

201-018377-0277C4CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYB12.5x202701430101051.23433.0045.70113115.044PASS90445.470.28433.00

201-018377-0277C5CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYB12.5x202701430101051.23420.0047.10113115.044PASS82146.880.26420.00

201-018377-0277C8CAP,ELECT,LIMPD,270F,80VDC,20%,-20%KYB12.5x202701430101051.23422.0051.30113115.044PASS61451.080.26422.00

201-015773-0157C9CAP,ELECT,LOW IMP,150F,25VDC,20%,-20%KZM6.3x1115054061051.122.4151.30113115.044PASS32751.300.002.41

Formula6: Conductive Polymer Aluminum, To=20C for these capacitors.

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLeToToKtBtImTaKfLxConclusionLx'TxIx

Rated ripple current (mA)Effective life time (Khrs)Rated Temp. (C)Rated internal temp. rise(C)Temp. Slope correction factorTemp. acceleration factor 2Measured ripple current (mA)Measured ambient temp.(C)Freq. CoeffEstimated lifetime (Khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILCalculated lifetime (Khrs)Actual internal temp. rise(C)Actual ripple current (mA)

201-018339-0127C912CAP,ELECT,POLY,120F,16VDC,20%,-20%PXS8x6.312029005105201.12555.7113115.044PASS1520.005.00

Lelon

CAP.Manufacturer: Lelon

Type 1 and 2:

Type 2 : Exponent "W" selection table

Type 3:

Type 1: The formula can be used for capacitor's rated voltage under 350V or case size under 20 (Liquid type).

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLoToTToIrTrKfLrConclusionTr

Rated ripple current (mA)Rated life (Khrs)Rated Temp. (C)measured temp. rise(C) at rated ripple currentMax allowable temp. rise(C)Measured ripple current(mA)Measured ambient temp.(C)Freq. CoeffEstimated lifetime (Khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILActual core temp. rise (C)

5002105515100351131.415.043.8PASS0.2

Type 2: The formula can be used for capacitor's rated voltage higher than 350V or case size larger than 20.

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLoToTToVRWVIrTrKfLrConclusionTrVA

Rated ripple current (mA)Rated life (Khrs)Rated Temp. (C)measured temp. rise(C) at rated ripple currentRated internal temp. rise(C)Rated working voltage (V)Voltage multiplierMeasured voltage (V)Measured ripple current(mA)Measured ambient temp.(C)Freq. CoeffEstimated lifetime (Khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILActual core temp. rise (C)Actual operating voltage (V)

10021053.554001.520080451131.415.043.8PASS2.24240

Type 3: The formula can be used for Solid Polymer electrolytic capacitor.To = 0C

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLoToTToIrTrKfLrConclusionTr

Rated ripple current (mA)Rated life (Khrs)Rated Temp. (C)measured temp. rise(C) at rated ripple currentRated internal temp. rise(C)Measured ripple current(mA)Measured ambient temp.(C)Freq. CoeffEstimated lifetime (Khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILActual core temp. rise (C)

201-018339-0127C912CAP,ELECT,POLY,120F,16VDC,20%,-20%OVK8x6.31202800510580557.61131.415.043.8PASS0.0000255102

Type 3: The formula can be used for Solid Polymer electrolytic capacitor.To = 0C

DescriptionRatingMeasured DataResult

P/NCircuit codeDescriptionTypesize D*L (mm)Cap. (uF)IoLoToTToIrTrKfLrConclusionTr

Rated ripple current (mA)Rated life (Khrs)Rated Temp. (C)measured temp. rise(C) at rated ripple currentRated internal temp. rise(C)Measured ripple current(mA)Measured ambient temp.(C)Freq. CoeffEstimated lifetime (Khrs)Estimated lifetime (yrs)Customer requirement (Khrs)PASS or FAILActual core temp. rise (C)

201-018339-0127C912CAP,ELECT,POLY,120F,16VDC,20%,-20%OVK8x6.31202800510580555.71131.415.043.8PASS0.0000255102

SunnyLi:If Tr lower than 40C, should use 40C as Tr.

SunnyLi:Ir and Io must be at same frequency

SunnyLi:If Tr under 40C, should use 40C as Tr.

SunnyLi:Ir and Io must be at same frequency

Linda lee: whenVA