DESIGNER BALUSTRADE & HANDRAIL COMPONENT CATALOGUE
2
3
CONTENTS
About us .........................................................................................
Clamps & Gaskets.......................................................................
Pin connectors .............................................................................
Post fittings ...................................................................................
Handrail/Cross bar fittings ......................................................
Wall & Glass mounted handrail/Grab rail fittings ..............
Knock in End caps .......................................................................
Frameless Glass Spigots ..........................................................
Frameless Glass Stand Offs “GSO” ........................................
Frameless Glass Aluminium base channel ..........................
Flanges & Cover plates ..............................................................
U - Tube Handrails & Associated Components....................
Self closing hinges and Magnetic locks ................................
4
6
10
12
13
16
18
20
22
24
28
30
36
4
ABOUT USPRO-RAIL is a division of PROTECH BUILDING PRODUCTS, a medium sized distributor of specialised building products. Our products are sourced locally and imported and we distribute nationally. Protech specialises in procurement of quality laminate and vinyl flooring, decking, waterproofing, coatings & specialised buidling products. Apart from locally made specialty products, we source material from the EU, the Far East & other parts of Africa.
All materials supplied by us are offered with full technical support and accreditation by international and local authorities. We work closely with specialist installers and applicators to ensure that our products perform to optimum manufacturers’ specifications. We add value by providing on-site training and advise on best practise.
Our vision is to provide quality products to the industry at a realistic price and to add value through our services which include technical support, training, education and on-site assistance.
Being a family run business spanning three generations, we are personally involved in every aspect of the business. We have been involved in the building industry since the 1980’s and have built up good experience to be able to assist in the specifying and use of our products.
We strive to partner with our customers to ensure that our quality products are installed and used correctly to ensure proper performance. Our Products meet or exceed industry quality requirements and provide excellent value for money.
VISION VALUES QUALITY
5
6
CLAMPS & GASKETS(D-shaped & square)
DESCRIPTION DESCRIPTION DESCRIPTION
PR 41-S-D00- P6
• Material = Stainless Steel • Grade = 316 • Finish = Satin or polished• Fits 6-10 mm glass
• Material = Stainless Steel • Grade = 304 • Finish = Satin or brushed• Fits 6-10 mm glass
• Material = Stainless Steel • Grade = 304 • Finish = Satin or brushed• Fits 6-10 mm glass
PR41-S-D00-P6 PR41-S-38.1-P6 PR41-RS-50.8-P4
DESCRIPTION• Material = Stainless Steel • Grade = 304 • Finish = Satin or brushed • Fits 6-10 mm glass
7
DESCRIPTION DESCRIPTIONDESCRIPTION
• Material = Stainless Steel • Grade = 316 • Finish = Satin or polished • Fits 6-12 mm glass
• Material = Stainless Steel • Grade = 316 • Finish = Satin or polished• Fits 6-12 mm glass
• Material = Stainless Steel • Grade = 316 • Finish = Satin or polished• Fits 6-12 mm glass
PR41-L-D00-P6 PR41-L-38.1-P6 PR41-L-50.8-P6
8
DESCRIPTION
DESCRIPTION
• Material = Stainless Steel • Grade = 316 • Finish = Satin or brushed• Fits 6-10mm glass
• Material = Stainless Steel • Grade = 316 • Finish = Satin or brushed• Used for = 15mm glass • Available in flat back or radius back
PR43-D00-P6
DESCRIPTION DESCRIPTION• Material = Stainless Steel • Grade = 316 • Finish = Satin or polished• Fits 6-10mm glass
• Material = Stainless Steel • Grade = 316 • Finish = Satin or polished• Fits 6-10mm glass
PR43-38.1-P6 PR43-50.8-P6
PR43 – XL
SQUARE CLAMPS
9
DESCRIPTION• Material = Stainless Steel • Grade = 316• Finish = Satin or brushed• Used for 10 – 12mm Glass
PR43-180-S6 PR41-180-S6
DESCRIPTION DESCRIPTION DESCRIPTION• Material = Stainless Steel • Grade = 316• Finish = Satin or brushed• Used for 10 – 12mm Glass
• Material = Stainless Steel • Grade = 316• Finish = Satin or polished• Used for 10 – 12mm Glass
• Material = Stainless Steel • Grade = 316• Finish = Satin or polished• Used for 10 – 12mm Glass
PR-180-I PR41 - 90*
10
DESCRIPTION DESCRIPTION DESCRIPTION• 38mm Fixed Pin Connector• Material = stainless steel • Grade = 316 • Finish = polished • Dimensions 79(H) x 38(D) x 50.8Ø
• 38mm Adj. Pin Connector• Material = stainless steel • Grade = 316 • Finish = polished • Dimensions 79(H) x 38(D) x 50.8Ø
• 38mm 90° Fixed Pin Connector• Material = stainless steel • Grade = 316 • Finish = polished • Dimensions 79(H) x 38(D) x 50.8Ø
PIN CONNECTORS
PR0718-38 - Fixed PR0718-38 - Adjustable PR0718-38 - 90°
11
PR0719-50
DESCRIPTION DESCRIPTION DESCRIPTION• 50mm Pin Connector • Material = stainless steel • Grade = 316 • Finish = polished • Dimensions 79(H) x 50(D) x 50.8Ø
• 50mm adjustable Pin Connector ) • Material = stainless steel • Grade = 316 • Finish = polished • Dimensions 79(H) x 50(D) x 50.8Ø
• Material = stainless steel • Grade = 316 • Finish = polished • Dimensions 79(H) x 50(D) x 50.8Ø
PR0719-50 - Adjustable PR0719 - 90°
12
DESCRIPTION DESCRIPTION• Material = stainless steel • Grade = 316 • Finish = polished • Dimensions: 35mm(L) x 22Ø• To fit 12-7mm tube
• Material = stainless steel • Grade = 316 • Finish = polished • Dimensions: 40mm(L) x 25Ø • used to mount onto round surface• To fit 16mm tube
PR8613-13-42-4
POST FITTINGSPR8613-16-42-4 PR8613-16-Flat
DESCRIPTION• Material = stainless steel • Grade = 316 • Finish = polished • Dimensions: 40mm(L) x 25Ø • Used to mount onto flat surface• To fit 16mm tube
DESCRIPTION• Material = stainless steel • Grade = 316 • Finish = polished• Dimensions: 120 x 60 x 50
PR8731-38.1 / 50.8
13
HANDRAIL & CROSS BAR FITTINGS
PR8342-13
DESCRIPTION DESCRIPTIONDESCRIPTION DESCRIPTION• Adjustable 12.7 OD bend • Material = stainless steel • Grade = 316 • Finish = polished• To fit 12-7 tube
• Adjustable 16 OD bend • Material = stainless steel • Grade = 316 • Finish = polished• To fit 16mm tube
• Material = stainless steel • Grade = 316 • Finish = polished• Dimensions: 27 x 27 x 50(D)• To fit 38-1 tube
• Material = stainless steel • Grade = 316 • Finish = polished• Dimensions: 30 x 30 x 50(D)• To fit 50-8 tube
PR8342-16PR9003-38.1 PR9003-50.8
ADJUSTABLE BENDS
STRAIGHT / 180 DEGREE PIPE CONNECTORPR9004 (50.8mm) PR9004 (38.1mm)
DESCRIPTION DESCRIPTION• Material = stainless steel • Grade = 316 • Finish = polished• To fit 50.8mm tube (x1.5)
• Material = stainless steel • Grade = 316 • Finish = polished• To fit 16mm tube (x1.5)
14
PR8905-50.8
PR8905-50.8
DESCRIPTION
DESCRIPTION
DESCRIPTION DESCRIPTION• Material = stainless steel • Grade = 316 • Finish = polished
• Material = stainless steel • Grade = 316 • Finish = polished• To fit 50.8 tube
• Material = stainless steel • Grade = 316 • Finish = polished
• Material = stainless steel • Grade = 316 • Finish = polished
SLOW BEND / RADIUS BEND
MITRE BEND
PR8904-38.1 PR8904-50.8
WALL FLANGEPR 0505
DESCRIPTION
• 50mm Wall Flange• Material = stainless steel • Grade = 316 • Finish = polished• Dimensions: 50.8 (D) x 25 x 85Ø
PR8905-38.1
DESCRIPTION• Material = stainless steel • Grade = 316 • Finish = polished• To fit 38.1 tube
15
16
WALL & GLASS MOUNTED HANDRAIL/GRABRAIL FITTINGS
17
WALL TO HANDRAIL BRACKETS WELD - ON BRACKETS
GLASS TO HANDRAIL BRACKETS
PR8758G PR111G
PR8788
PR111G - FIXED
PR0145 / ADJUSTABLE
DESCRIPTION
DESCRIPTION
DESCRIPTION DESCRIPTION
• Adjustable Saddle + Pin • Material = stainless steel • Grade = 316 • Finish = satin / polished• Fits to: 50.8 OD handrail
• Adjustable• Material = stainless steel • Grade = 316 • Finish = satin / polished • Fits to: 50.8 OD handrail
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 58(H) x 85(L) x 70Ø• Fits to: 50.8 OD handrail
• Material = 316 Stainless Steel• Finish: Polished Satin• Fits 50.5mm Handrail• Adjustable Saddle
• Material = 316 Stainless Steel• Finish: Satin/Polished• Fits 50.5mm Handrail• Adjustable Saddle + Pin
DESCRIPTION
18
FLAT END CAPS
ARCHED END CAPS
PR8732-38
PR8733-38 PR8733-50 PR8731
PR8732-50
DESCRIPTION
DESCRIPTION DESCRIPTION DESCRIPTION
DESCRIPTION• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 1.5mm x 38.1Ø • Fits to: 38 OD tube
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 6mm x 38.1Ø • Fits to: 38 OD tube
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 6mm x 50.8Ø • Fits to: 50.8 OD tube
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 38.1Ø x5mm • Fits to: 38 OD tube
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 1.5mm x 50.8Ø • Fits to: 50.8 OD tube
KNOCK IN END CAPS
PREC13 PREC16
DESCRIPTION DESCRIPTION• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 12.7Ø x5mm • Fits to: 12.7 ODx 1.5mm or 1-2
mm tube
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 16Ø x 2mm • Fits to: 16 OD x 1.5mm thick
tube
19
20
DESCRIPTION DESCRIPTION
• Bullet Spigot• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 60mm Slot into 150(L) x 50Ø • Fits to: maximum 15mm • Supplied with Rubber Spacer, Pressure
Plate, 2.3mm
• Flat top spigot• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 100mm Slot into 150(L) x 50Ø • Fits to: maximum 15mm • Supplied with Rubber Spacer, Pressure
Plate, 2.3mm
FRAMELESS GLASS SPIGOTS
PRSPIGB PRSPIGFT
21
DESCRIPTION DESCRIPTION• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 200(L) x 40Ø • Fits to: maximum 20mm
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 200(L) x 40Ø • Fits to: maximum 20mm
PRSPIGD PRSPIGC
22
DESCRIPTION
DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION
DESCRIPTION DESCRIPTION• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: LID 10mm x 16Ø
& BASE 25mm x 16Ø • Made to order
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: LID 10mm x 40Ø
& BASE 35mm x 40Ø• stock item
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: LID 10mm x 40Ø
& BASE 35mm x 40Ø• stock item
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: LID 10mm x 50Ø
& BASE 35mm x 50Ø• stock item
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: LID 10mm x 20Ø &
BASE 25mm x 20Ø • Made to order
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: LID 6mm x 25Ø &
BASE 25mm x 25Ø• Made to order
PR16 MM GSO
FRAMELESS GLASS STAND OFFS “GSO”
PR20 MM GSO PR25 MM GSO
PRGSO40AC PRGSO40 PRGSO50AC
• Material = stainless steel • Grade = 316 • Finish = satin / polished• Dimensions: 35 L x 50 D• stock item
PRGSO50
23
24
FRAMELESS GLASS ALUMINIUM BASE CHANNEL PR6901 ( base channel )
• Material = aluminium • Finish = machine grey • Dimensions: 124(H) x 42(W) x 2500(L) • Weight per 2.5m = 23kg • Supplied with pre-drilled holes @ 1.2 c/c • Fits to: maximum 15mm• Fixing bolts available
DESCRIPTION
25
Utube Handrail with gasket
glass
gasket on the right side of the glass gasket on the left side of the glass
wedgeThe vertical portion of the “L” shaped gasket
The horizontal portion of the “L” shaped gasket
Expansion screws
26
27
WEDGE
PR6901EC
END CAP
• Material = plastic • Finish = aluminium grey • Dimensions: 126 x 46
DESCRIPTION
BLACK RUBBER ‘L’ SHAPED GASKET
28
PR8705-38.1
PR8705-50.8
PR76mm x 38 - 1
• Material = stainless steel• Grade = 316 • Finish = polished • Dimensions: 19(h) x 105(w) x 39
• Material = stainless steel • Grade = 316 • Finish = polished • Dimensions: 19(H) x 105(W) x 51.5
• Material = stainless steel • Grade = 316 • Finish = polished • Dimensions: 39 D x 14 H
FLANGES & COVER PLATES COVER PLATES
DESCRIPTION
DESCRIPTION
DESCRIPTION
29
FLANGES
• Material = Stainless steel• Grade = 316 • Finish = Satin / brushed• Dimensions: 4.5(H) x 95(D) x 38.5
• Material = Stainless steel • Grade = 316 • Finish = Satin / brushed • Dimensions: 4.5(H) x 95(D) x 51.5
PR8701-38
PR8701-50
DESCRIPTION
DESCRIPTION
30
42.4 OD
DESCRIPTION
DESCRIPTION
U-TUBE HANDRAILS & ASSOCIATED COMPONENTS
PR6920 UTUBE
• Material = Stainless steel • Grade = 304 or 316 • Finish = Satin or Polished • Dimensions: 24 x 24 x 42.4Ø ( 5m length )
• Material = Stainless steel• Grade = 316 • Finish = Satin or Polished • Dimensions: 80 x 80 x 42.4Ø
PR6313 MITRE BEND
31
PR6732 END CAP
PR6790 CONNECTOR
DESCRIPTION
DESCRIPTION
• Material = Stainless steel • Grade = 316 • Finish = Satin or Polished • Dimensions: 42.4Ø
• Material = Stainless steel • Grade = 316 • Finish = Satin or Polished • Dimensions: 6mm x 42.4Ø
32
PR6015 UP/DOWN BEND
DESCRIPTION
• Material = Stainless steel• Grade = 316 • Finish = Satin or Polished • Dimensions: 30(H) x 30(H) x 42.4Ø
PR6012 WALL FLANGE
DESCRIPTION
• Material = Stainless steel• Grade = 316 • Finish = Satin or Polished • Dimensions: 6mm x 42.4Ø
DESCRIPTION
• Material = rubber • Grade = EPDM • Finish = black • Fits to: 8 – 10mm
PR1017 A PR1017 B
DESCRIPTION
• Material = rubber • Grade = EPDM • Finish = black • Fits to: 12 – 15mm
33
60 X 40 RECTANGLE:
PR6920
• Material = Stainless steel• Grade = 316 • Finish = Satin or Polished • Dimensions: 60 x 40 ( 5m length )
• Material = Stainless steel• Grade = 316 • Finish = Satin or Polished • Dimensions: 60 x 40 x 6
• Material = Stainless steel• Grade = 316 • Finish = Satin or Polished • Dimensions: 60 x 40 x Adj.55°
DESCRIPTION DESCRIPTIONDESCRIPTION
PR6790 REC PR6015REC “D” (adjustable down bend)
PR6015REC “U” (adjustable up & down bend)
• Material = Stainless steel • Grade = 316 • Finish = Satin or Polished • Dimensions: 60 x 40 x Adj.55°
DESCRIPTION
PR6313 REC
• Material = Stainless steel • Grade = 316 • Finish = Satin or Polished • Dimensions: 60 x 60 x 40
DESCRIPTION
PR6732 REC
• Material = Stainless steel • Grade = 316 • Finish = Satin or Polished • Dimensions: 60 x 60 x 4
DESCRIPTION
PR1017
• Material = rubber • Grade = EPDM • Finish = black • Fits to: 8 – 11mm
DESCRIPTION
34
Pr1017 ‘A’
DESCRIPTION
DESCRIPTION
• Material = rubber • Grade = EPDM • Finish = black • Fits to: 11 – 13.5mm
• Material = rubber • Grade = EPDM • Finish = black • Fits to: 15mm
80 X 40 OVAL:
PR6920 ‘O’
DESCRIPTION DESCRIPTION DESCRIPTION
• Material = Stainless steel • Grade = 316• Finish = Satin• Dimensions: 80 x 40 ( 5m length )
• Material = Stainless steel • Grade = 316• Finish = Satin• Dimensions: 80 x 40 x 38
• Material = rubber • Grade = EPDM • Finish = black • Fits to: 12mm
PR6732 ‘O’ PR1017 ‘O’
PR1017 ‘OA’
35
25 X 25 SQUARE:
• Material = Stainless steel • Grade = 316 • Finish = Satin or polished• For 12mm glass only
DESCRIPTION
UTUBE - SILICONE APPLICATION
36
SELF CLOSING HINGES & MAGNETIC LOCKSHINGES
MAGNETIC LOCKS
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
• basic hinge• Material: Stainless Steel• Grade = 316 • Finish = polished
• Glass to glass lock• Material: Stainless Steel• Grade = 316 • Finish = polished
• Glass to round post hinge• Material: Stainless Steel• Grade = 316 • Finish = polished
• Glass to glass lock• Material: Stainless Steel• Grade = 316 • Finish = polished• Supplied with a key
• Mounted to flat surface• Material: Stainless Steel• Grade = 316 • Finish = polished
• Glass to round post lock• Material: Stainless Steel• Grade = 316 • Finish = polished
PRSA003B
PRML010
PRHAP-C
PRML-RUBBER
SAS003B
PRML008
37