Contact ELT to assist you with your Custom Lifting Solution.
All Lifters Are Load Tested,Designed and Certified To Exceedthe Minimum Requirements of
ANSI/ASME BTH-1, B30.20 & B30.23.
Designer & Manufacturer ofCustom Lifting Solutions
716.667.6833 [email protected] WWW.ELTLIFT.COM
W W W. E LT L I F T. C O M3566 South Benzing Rd, Orchard Park, NY 14127 716.667.6833 888.358.5438 [email protected]
Adjustable Spreader Brackets (ASB)
WLL: 5,000 to 200,000 lbsLength: 5 to 40 ft
Beam length easily adjustable by slidingthe brackets to a different set of holes.
Additional pick points can be added atthe jobsite by drilling additional holes.
You have the option of supplyingyour own rectangular tube.
Larger sizes can be engineered.
ASB-05-20
Custom Four Point Lifter (CFP)
Lifting Beams can be configured tomeet your specific lifting requirements.
Popular options for these lifters are:Off Center Bail with Counter Balance,Adjustable Bail &/or Adjustable Legs
Custom Three Point Lifters also available.
CFP
Twin Bail Beam (TBB) withMultiple Pick & Adjustable Pick Points
WLL: 1,000 to 60,000 lbsMax. Distance between Hooks: 20 ft
Larger custom sizes available.
TBB-20-120
Adjustable Hook Beam (AHB)
WLL: 1,000 to 60,000 lbsMax. Distance between Hooks: 20 ft
Larger custom sizes available.
AHB-20-120-48
Fixed Hooked Beam (FHB)
WLL: 1,000 to 60,000 lbsMax. Distance between Hooks: 20 ft
Larger custom sizes available.
FHB-80-180
Custom Spreader Beam
Spreader Beams are custom designed andbuilt for your specific lifting requirements.
BEAM OPTIONS• J-Hook• Low Head Room• Upper Chain Bridle Assembly• Adjustable Bail (powered or manual)
SPREADER BEAM
BEAMS – ASB BRACKETS
W W W. E LT L I F T. C O M3566 South Benzing Rd, Orchard Park, NY 14127 716.667.6833 888.358.5438 [email protected]
Narrow Aisle Coil Lifter (NAC)
WLL: 20,000 to 80,000 lbsWidths: up to 96 inches
Vertical Clearance: up to 36 inches
Larger custom sizes available.
NAC-50-72-24-34
Telescoping Sheet Lifter (TSL)
WLL: 6,000 to 40,000 lbsWorm Gear Assembly locks legs into position
Custom dimensions & capacities available.
TSL-10-96-36-16
Mill Duty Telescoping Coil Lifter (TCL)
WLL: 10,000 to 150,000 lbsCoil Widths: 20 to 96 inches
Proprietary, Greaseless, Low Friction Unit
Custom dimensions & capacities available.Above unit shows motorized optionwith Proximity & Load Sensors.
POWERED TCL
Heavy Duty Telescoping VerticalID & OD Lifter (TIL)
WLL: 10,000 to 150,000 lbsCoil Widths: 20 to 96 inches
Proximity & Load Sensors available.
TIL w/HAND WHEEL
Close Stacking C-Hook (CHC)
WLL: 1,000 to 100,000 lbsCoil Widths: from 24 to 84 inchesVertical Clearances: 16 to 44 inches
Custom sizes and capacities available.
CSC-50-60-36-28 CUSTOM CSC
ELT Manufactures Custom Tongs
Available in a variety of stylesto suit your requirements.
TONGS
Mechanically OperatedConvector Plate Lifter
No Power is RequiredFully Motorized Available
CUSTOM CONVECTOR PLATE LIFTER
Retracted
Extended
Custom Close Stacking C-Hook (CSC)
WLL: 77,000 lbsOptional Replaceable Urethane Bumpers
Low Profile Reinforced Lower Leg
Larger custom sizes available.
COIL & SHEET LIFTERS – C-HOOKS
W W W. E LT L I F T. C O M3566 South Benzing Rd, Orchard Park, NY 14127 716.667.6833 888.358.5438 [email protected]
Crane Basket High (CBH)4 ft x 4 ft x 8 ft
WLL: 1,000 lbsPersonnel Crane Basket High Profile
Custom sizes and capacities available.
CBH-0404-1000BASKETS
Crane Basket High (CBH)4 ft x 8 ft x 8 ft
WLL: 1,500 lbsPersonnel Crane Basket High Profile
Custom sizes and capacities available.
CBH-0408-1500
Crane Basket Low (CBL)4 ft x 4 ft x 4 ft
WLL: 1,000 lbsPersonnel Crane Basket Low Profile
Custom sizes and capacities available.
CBL-0404-1000
Crane Material Basket (CMB)4 ft 2 in x 4 ft 2 in x 4 ft
WLL: 2,000 to 4,000 lbs
Custom sizes and capacities available.Above unit includes optional casters and asolid bail to allow for head room restrictions.
CMB-042042-4000
Crane Material Basket (CMB)2 ft x 2 ft x 2 ft with 3 ft Upper Arm
WLL: 1,000 lbs
Custom sizes and capacities available.Above unit is designed to fit into small areas.The solid bail provides sufficient clearancefor placing items in & out of the basket.
CMB-0202-1000
Personnel Crane Basket (12 man)10 ft x 10 ft x 8 ft
WLL: 5,000 lbs
Custom sizes and capacities available.
ELT PROVIDES CUSTOMMATERIAL & CRANE BASKETS TO MEETYOUR SPECIFIC REQUIREMENTS.
CUSTOM 12 MAN CRANE BASKET
Standard Equipment on Personnel Baskets• Four Leg Bridle w/master link & four bolt type shackles• Safety Lanyard and tagline anchors• Quick attach/detach test weight assembly• In-Swing, self closing, self latching door• Grab Rail around full interior perimeter• Full 4" kick plate• Full 42" height expanded metal to reduce wind affect• Slip resistant checkered plate floor• Fork Lift Tubes for easy movement at the job site• Drain Holes in floor perimeter• Painted safety yellow
Optional Equipment• Solid Bail, optional for restricted headroom• Rubber Bumper around bottom and perimeter• Casters System allow rolling fully loaded• Expanded Metal removable or fixed overhead protection• Test Weight is available as steel concrete form for you to fill with concreteon the jobsite in order to provide a more economical solution
Crane Baskets are designed to ASME BTH-1. Manufactured and tested inaccordance with code of Federal Regulations 1926.550 and ASME B30.23 andare completely OSHA compliant. Crane Baskets are designed, fabricated, testedand certified to exceed the above standards in order to meet the demandsfor a long life of rugged jobsite use.
W W W. E LT L I F T. C O M3566 South Benzing Rd, Orchard Park, NY 14127 716.667.6833 888.358.5438 [email protected]
Fixed Crane Forks (FCF)
WLL: 1,000 to 50,000 lbsLoad Lengths: 30 to 72 inches
Vertical Clearance: 48 to 72 inches
Custom Fixed Crane Fork available.
FCF-02-72-72
Fork Lift Attachment Hook Cuffs (LHC)WLL: 3,000 lbs
Fork Tube Widths: 4-1/2, 5-1/2 or 7-1/2 inches
Custom sizes available.
LHC5
Fork Lift Attachment Hook Beam (LHB)
WLL: 4,000 to 16,000 lbsFork Tubes: 7-1/2 x 2-1/2 inches
Custom sizes available.
LHB5
Extendable Fork Lift Boom (LB)WLL: 4,000 lbs
Reach: 7 to 12 ft in 1 ft incrementsFork Tubes: 2-1/2 x 7-1/2 inches
Custom sizes available.
LB-0712-4000
Adjustable Crane Forks (ACF)
WLL: 1,000 to 50,000 lbsLoad Lengths: 30 to 72 inches
Custom Adjustable Crane Fork available.Above unit shows two bails in lieuof a standard counterweight.
ACF
Skip Pan (SKP)
All Trash Hoppers are built to yourneeds, with all seams fully weldedto make each unit water tight.
Many different sizes, designs andcapacities can be furnished.
SKIP PAN
Adjustable Hook BeamGreat for a fork truck or overhead crane.
LIFT BEAM WITH FORK TRUCK ATTACHMENT
ELT has an Engineering Staff to Custom Design all your Below the Hook Lifters.
PALLET LIFTERS – FORKLIFT ATTACHMENTS – SKIP PANS
W W W. E LT L I F T. C O M3566 South Benzing Rd, Orchard Park, NY 14127 716.667.6833 888.358.5438 [email protected]
WWHHYY TTHHIISS LLIIGGHHTT WWEEIIGGHHTT LLIIFFTTIINNGG SSYYSSTTEEMM??
AA CCOOMMPPLLEETTEE WWIINNDD TTUURRBBIINNEE LLIIFFTTIINNGG && EERREECCTTIINNGG SSYYSSTTEEMM!!Includes: Brackets, Slings, Shackles, Bolts, Rigging & Engineered Lifting Plans.
TTHHEE GGOOLLDD SSTTAANNDDAARRDD IINN WWIINNDD TTUURRBBIINNEE LLIIFFTTIINNGG!!
• Exceeds ANSI/ASME Requirements.
• Reduced Manpower Required to Install.
• Durable Nickel Plated Inserts.
• No Load Bearing Welds.
• Reduced Crane Time.
• Tighter Bolt Clearance Holes.
• Adjustable Bolt Pattern.
• Staging Hooks Available.
• Reduced Number of Brackets, Only Four Needed for Entire Lift.
• Replaceable Inserts to Accommodate Variety of Bolt Patterns.
• Zinc Dichromate Plated Body for Outstanding Corrosion Protection.
PATENT PENDING WINDTURBINE LIFTING SYSTEM
V.2011030PDF