20
DETENTION ACCESSORIES Engineered to last – 20 years to life.
| Date post: | 21-Apr-2018 |
| Category: |
Documents |
| Upload: | truongkhuong |
| View: | 218 times |
| Download: | 2 times |
DETENTIONACCESSORIES
Engineered to last – 20 years to life.
Table of ContentsKey Cabinet ...............................................................................................................................................................................................................................2
Long Gun Locker....................................................................................................................................................................................................................3
Pistol Locker - Standard .....................................................................................................................................................................................................4
Pistol Locker - Tilt ...................................................................................................................................................................................................................5
Package Pass .............................................................................................................................................................................................................................6
Food Pass ....................................................................................................................................................................................................................................7
Safety Shelves with Hooks ...............................................................................................................................................................................................8
Ball & Pin Safety Hook .........................................................................................................................................................................................................9
Safety Hook ............................................................................................................................................................................................................................10
Speaker Port ...........................................................................................................................................................................................................................11
One Piece Mirrors ..............................................................................................................................................................................................................12
Two Piece Mirrors ..............................................................................................................................................................................................................13
Soap dish .................................................................................................................................................................................................................................14
Toilet Paper Holder ............................................................................................................................................................................................................15
Grab Bars ..................................................................................................................................................................................................................................16
Safe Bar ......................................................................................................................................................................................................................................17
Designed with Durability in Mind
PDI’s standard and custom specification detention accessories are the most the cost-effective solution for new construction or retrofits, and contribute to safer correctional environments.
Fabricated with hard wearing steel or stainless steel for long-lasting value, PDI accessories are
virtually indestructible. Resistance to scratching, dents, and markup withstand years of use and abuse. Polished surfaces are easier to clean and disinfect, helping reduce the spread
of germs. Multi gauge steel mounting plates provide secure installation in any environment.
Page | 2
KEY CABINETKC1000
Door hung on continuous steel piano hinge and flanged 1” all around for additional strength. Equipped with interior swinging 10 gauge steel leaf panels for maximum key storage. Coated with factory primer for finish painting.
SPECIFICATIONSMaterial Shell: 10 gauge steel
Door: 10 gauge steel plate Key racks: 14 gauge bent steel plates
Dimensions 24” H x 18 5/8” W
CAPACITY 180 Key Capacity 300 Key Capacity 405 Key Capacity 60 Paracentric Keys 60 Paracentric Keys 120 Paracentric Keys 120 Mogul Keys 120 Mogul Keys 180 Mogul Keys 120 Builders Keys 105 Builders Keys
INSTALLATIONMounting holes provided for installation with 3/8” anchors. Anchors not provided by PDI.
OPTIONSCustom key capacity per project requirements. Powder coat finish.
KC10
00
714.288.1770 | [email protected] | pdidet.com Page | 3
LONG GUN LOCKERLG1000
Secure long gun locker with 3, 4, 6 or 8 compartments for rifles or shotguns. Doors on 11/2” open x .060” continuous piano hinge with .125 pin, and ABLOY cam locks
SPECIFICATIONSMaterial Shell: 10 gauge steel Doors: 10 gauge plateDimensions Vary by specification
INSTALLATION1/2” diameter anchor holes provided in back of unit for wall mounting. Anchors not by PDI.
OPTIONSCustom capacity and size based on project requirements. Factory red oxide primer finish. Stainless steel with polished finish. Powder coat finish. Custom compartments.
LG10
00
Page | 4
PISTOL LOCKER - STANDARDPL1000
PL10
00
Secure pistol locker equipped with cam locks. Doors are hung on continuous steel piano hinges and include and internal door stop mechanism.
Two keys supplied per compartment and two master keys supplied per unit. Coated with factory primer.
Angle frame can be shipped loose for semi-recessed installation and field welded in place.
SPECIFICATIONSMaterial Shell: 10 gauge steel Doors: 10 gauge plateMounting 7/16” diameter holes for mounting.Dimensions Locker dimensions vary
21/2” x 21/2” x 10 gauge angle frame
INSTALLATIONMounting plates provided with 7/16“ diameter holes for 3/8” anchors. Anchors not by PDI.
OPTIONSCustom capacity and size based on project requirements. Locker compartment tags. Stainless steel. Galvanized steel. Powder coat finish.
714.288.1770 | [email protected] | pdidet.com Page | 5
PL20
00
PISTOL LOCKER - TILTPL2000
Secure pistol locker with tilt out compartments equipped with Master snap locks. Compartments are hung on continuous steel piano hinges and include internal stop bars.
Two keys supplied per compartment and two master keys supplied per unit. Coated with factory primer finish.
Angle frame can be shipped loose for semi-recessed installation and field welded in place.
SPECIFICATIONSMaterial Shell: 10 gauge steel angle frame Doors: 10 gauge plateMounting 7/16” diameter holes for mountingDimensions Locker dimensions vary
21/2” x 21/2” x 10 gauge angle frame
INSTALLATIONMounting plates provided with 7/16“ diameter holes for 3/8” anchors. Anchors not by PDI.
OPTIONSCustom capacity and size based on project requirements. Locker compartment tags. Stainless steel. Galvanized steel. Powder coat finish.
Page | 6
PACKAGE PASSPP1000
Package Pass doors are connected with a control mechanism allowing only one door to be open at a time. Secure side door equipped with a Master snap lock and door pull. Coated with factory primer for finish painting.
SPECIFICATIONSMaterial 11 gauge doors
10 gauge body 7 gauge plate door
Dimensions Maximum package size 19” W x 13” H
INSTALLATIONDoor is equipped with two 7 gauge angle collars for installation.
OPTIONSPowder coat. Stainless steel door.
PP10
00
714.288.1770 | [email protected] | pdidet.com Page | 7
FOOD PASSFP1000
Food Pass door is on a continuous piano hinge. Adjoining slip collars create a secure pass through. Food pass face prepped for a detention snap lock. Coated with factory primer for finish painting.
SPECIFICATIONSMaterial 12 gauge assembly and handle
7 gauge plate doorDimensions 12 3/8” H x 19 5/16” overall
4 1/2” H x 15” W pass thru opening
INSTALLATIONCreate cut out for food pass and either field weld or thru-bolt.
OPTIONSPowder coat. All stainless steel. Galvanized material.
FP10
00
Page | 8
SAFETY SHELVES WITH HOOKSSF1000/SF2000
SPECIFICATIONSMaterial 7 gauge thick hook bolted to 10 gauge bracket with
non-removable security screw and tension washerDimensions 8” D x 6” H x 18” W
5” x11 /2” x 10 gauge (shelf )
INSTALLATIONWall mounted with 5/16” diameter mounting holes and 1/4” anchors. Anchors not by PDI.
OPTIONSPowder coat finish. All stainless steel. All galvanized material.
SF2
000
SF1
000
714.288.1770 | [email protected] | pdidet.com Page | 9
SH
2000
BALL & PIN SAFETY HOOKSH2000
Stainless steel body and round ball hook with steel back strap and nylon bushing. Up to 4 hooks.
SPECIFICATIONSMaterial 14 gauge stainless steel
16 gauge stainless steel back strapDimensions 4” H x 4” W x 1” D
INSTALLATIONPunched and countersunk for wall mounting with 1/4” anchors.. Anchors not by PDI.
OPTIONSSingle, 2, or 4 hook strip. Powder coat finish.
Page | 10
SH
1000
Hook bolted to bracket with non-removable security screw and tension washers.
SPECIFICATIONSMaterial 10 gauge mounting plate and bracket
7 gauge hookDimensions 5” H x 11/2” W
INSTALLATION5/16” diameter holes for wall mounting with 1/4” anchors. Anchors not by PDI.
OPTIONSPowder coat finish. All stainless steel. All galvanized material.
SAFETY HOOKSH1000
714.288.1770 | [email protected] | pdidet.com Page | 11
SPEAKER PORTSP1000
Stainless steel face plate with perforated pattern, connected with a pass-proof segment. Polished to a #4 finish. Ships with security screws for assembly.
SPECIFICATIONSMaterial Stainless steelDimensions 61/2” diameter x 1/8”
INSTALLATIONInstall face plates from opposing sides of glass. Fasten both face plates together with provided security screws.
SP1000
Page | 12
ONE PIECE MIRRORS MR1000/MR1001
One piece mirrors are stamped stainless steel with a polished mirror finish.
SPECIFICATIONSLARGE ONE-PIECE MIRRORFrame 16 gauge steelMirror 20 gauge stainless steelDimensions Frame: 91/2” W x 111/4” H x 5/16” D
Mirror: 10” W x 14” H
SMALL ONE-PIECE MIRRORFrame 14 gauge steel Mirror 20 gauge stainless steelDimensions Frame: 10” W x 111/2” H x 1/4” D
Mirror: 8” W x 93/4” H
INSTALLATIONEight 5/16” diameter countersunk holes provided for installation with 1/4” flat head anchors. Anchors not by PDI.
Mirror can be installed onto optional mounting plate or embed plate which ships with eight 1/4-20 stainless steel FH security screws for installation.
OPTIONSMounting plate. Embed plate.
MR
1001
MR
1000
714.288.1770 | [email protected] | pdidet.com Page | 13
TWO PIECE MIRRORS MR2000/MR2001
Two Piece Mirrors are composed of a stamped chrome plated and polished frame with mirror insert. Mirror is steel sheet polished to a mirror finish approximating that of glass.
SPECIFICATIONSLARGE 2-PIECE MIRRORFrame 16 gauge steelMirror 20 gauge stainless steelDimensions Frame: 121/2” W x 181/2” H x 5/16” D Mirror: 10” W x 14” H
SMALL 2-PIECE MIRRORFrame 14 gauge steel Dimensions Frame: 10” W x 111/2” H x 5/16” D
Mirror: 8” W x 91/2” H
INSTALLATIONEight 5/16” diameter countersunk holes provided for installation with 1/4” flat head anchors. Anchors not by PDI.
Mirror can be installed onto optional mounting plate or embed plate which ships with Eight 1/4-20 stainless steel FH security screws for installation.
OPTIONSMounting plate. Embed plate.
MR
2001
MR
2000
Page | 14
SOAP DISHSD1000
SPECIFICATIONSMaterial 14 gauge stainless steel with exposed surfaces in satin finish Mounting Plates: 11 gauge stainless steelDimensions 71/2” W x 55/8” H x 23/4” D
INSTALLATIONProvide 6” W x 4” H x 3” D wall opening for installation.
OPTIONSChase mounted with rear threaded studs and flat bar back plate. Face mounted with 5/16” diameter holes for 1/4” button-head anchors.
SD1000
714.288.1770 | [email protected] | pdidet.com Page | 15
TOILET PAPER HOLDERTP1000
SPECIFICATIONSMaterial 14 gauge stainless steel one-piece drawn, seamless
construction with exposed surfaces in satin finishDimensions 7” W x 7” H x 49/32” D
INSTALLATIONProvide 53/4” diameter x 41/4” D wall opening for installation. Unit can be chase mounted or face mounted.
OPTIONSChase mounted with rear threaded studs and flat bar back plate. Face mounted with 5/16” diameter holes for 1/4” button-head anchors.
TP1000
Page | 16
GRAB BARSGB1000/GB2000
Stainless steel detention grab bars for use in handicap accessible areas.
SPECIFICATIONSMaterial Tube: 18 gauge, type 304 stainless steel Mounting Plates: 11 gauge stainless steelDimensions Tube: 11/2” diameter
Mounting Plates: 4” diameter
INSTALLATIONThree 7/16” diameter holes drilled in mounting plates for anchors. Anchors not by PDI.
OPTIONSClosure Plate - bottom gap between wall and grab bar closed with a 10 gauge plate with 1/4” diameter holes for drainage.
GB1000
GB2000
714.288.1770 | [email protected] | pdidet.com Page | 17
SAFE BARSB1000
Continuous extruded aluminum grab bar, hard-coat anodized.
SPECIFICATIONSMaterial Extruded 6063-T52 aluminumDimensions 11/2” diameter grab area
11/2” gap from grab area and wall
INSTALLATION7/16” diameter holes for 3/8” anchors. Anchors not by PDI.
OPTIONSSafe bar end caps.
SB10
00
