This document is a translation. The definitive version is the original German annex to the accreditation certificate.

1/8

Deutsche Akkreditierungsstelle GmbH

Annex to the Accreditation Certificate D-IS-13119-01-00

according to DIN EN ISO/IEC 17020:2012

Period of validity: 18.09.2017 to 07.11.2018 Date of issue: 01.12.2017

Holder of certificate:

IMA Materialforschung und Anwendungstechnik GmbH

Wilhelmine-Reichard-Ring 4, 01109 Dresden

for its inspection body Type A

at the location:

Wilhelmine-Reichard-Ring 4, 01109 Dresden (BI 1)

Am Lagerplatz 4, 01099 Dresden (BI 2)

Inspections in the fields:

Inspection of products, product groups and structural elements in the product fields vessels,

profiles as well as pipes, pipe form elements, armatures and pipe systems from plastics, fibre

plastics composites, plastics metal composites, metal and inspection of factory production

control of products (vessels, profiles, pipes, pipe form elements, armatures and pipe systems

from plastics, fibre plastics composite, plastics metal composites), metal, metallic product

groups and structural elements in accordance with specifications and determination of their

conformity with specific requirements and on the basis of professional judgment, general

requirements

Abbreviations used: see last page

Annex to the accreditation certificate D-IS-13119-01-00

Period of validity: 18.09.2017 to 07.11.2018 - Translation - 2/8

Date of issue: 01.12.2017

Inspections according to inspection procedure

QBI/1

2016-11

Work instruction of IMA Inspection body – Standard operating

procedure Inspections for examining products, factory production

inspections as well as sampling at production location

Inspections in the following fields are done in accordance with the specifications defined by the

respective certification schemes, evaluation and basic normative documents

1. Plastics structural elements (BI 1)

DIBt Building code of

German states

PÜZ List part IIa

Serial no. 41.1/2

Vessels, containers and retaining devices as well as collecting pits

without outlets made from thermosetting plastics; reaction resin,

textiles reinforced materials 1

DIBt Building code of

German states

PÜZ List part IIa

Serial no. 41.2/1

Coatings for container walls and deflection surfaces 1

DIBt Building code of

German states

PÜZ List part IIa

Serial no. 6.1/1, 6.1/3,

6.1/4

Structural elements made of composite materials and glass fibre

reinforced plastics1; structural elements made of thermoplastics1;

reaction resin composite construction materials1

DIBt Building code of

German states

PÜZ List part IIa

Serial no. 1.5/5

Textile reinforcements

DIN EN 13245-2

2010-11

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building

applications - Part 2: PVC-U profiles and PVC-UE profiles for internal

and external wall and ceiling finishes

DIN EN 14509

2013-12

Self-supporting double skin metal faced insulating panels – Factory

made products – Specifications

Annex to the accreditation certificate D-IS-13119-01-00

Period of validity: 18.09.2017 to 07.11.2018 - Translation - 3/8

Date of issue: 01.12.2017

Quality regulations for

sandwich elements and

profiles EPAQ, 2016-11

Quality regulations of European Association for Panels and Profiles

(PPA-Europe) for sandwich elements and cold formed profiles

DIN EN 14782

2006-03

Self-supporting metal sheet for roofing, external cladding and internal

lining - Product specification and requirements

EAD 260001-00-03.03

2016-04

Structural sections and decks made from fibre reinforced polymers

(FRP/glass fibre composites); EOTA file No. 13-26-0001-03.03

2. Pipes systems (BI 2)

DIN 8076

2013-09

Pressure pipelines made from thermoplastics materials – Metal

and plastics compression fittings for polyethylene (PE) pipes

DIN EN 253

2015-12

District heating pipes – Preinsulated bonded pipe systems for

directly buried hot water networks – Pipe assembly of steel

service pipe, polyurethane thermal insulation and outer casing of

polyethylene

DIN EN 448

2016-02

District heating pipes - Preinsulated bonded pipe systems for

directly buried hot water networks - Fitting assemblies of steel

service pipes, polyurethane thermal insulation and outer casing of

polyethylene

DIN EN 489

2009-07

District heating pipes - Preinsulated bonded pipe systems for

directly buried hot water networks - Joint assembly for steel

service pipes, polyurethane thermal insulation and outer casing of

polyethylene

DIN EN 1254-3

1998-03

Copper and copper alloys - Plumbing fittings - Part 3: Fittings with

compression ends for use with plastics pipes

DIN EN 1254-8

2012-08

Copper and copper alloys - Plumbing fittings - Part 8: Fittings with

press ends for use with plastics and multilayer pipes;

DIN CEN/TS 12201-5

2014-05

Plastics piping systems for water supply, and for drainage and

sewerage under pressure – Polyethylene (PE) – Part 5: Fitness for

purpose of the system;

DIN CEN/TS 1555-5

2014-04

Plastics piping systems for the supply of gaseous fuels -

Polyethylene (PE) – Part 5: Fitness for purpose of the system;

Annex to the accreditation certificate D-IS-13119-01-00

Period of validity: 18.09.2017 to 07.11.2018 - Translation - 4/8

Date of issue: 01.12.2017

DIN ISO/TS 15874-7

2004-03

Plastics piping systems for hot and cold water installations -

Polypropylene (PP) - Part 7: Guidance for the assessment of

conformity

DIN CEN/TS 14632:2012-05;

DIN SPEC 19939:2012-05

Plastics piping systems for drainage, sewerage and water supply,

pressure and non-pressure – Glass-reinforced thermosetting

plastics (GRP) based on unsaturated polyester resin (UP) -

Guidance for the assessment of conformity;;

DIN ISO/TS 15875-7

2004-03

Plastics piping systems for hot and cold water installations -

Crosslinked polyethylene (PE­X) .Part 7: Guidance for the

assessment of conformity

DIN ISO/TS 15876-7

2004-03

Plastics piping systems for hot and cold water installations -

Crosslinked polyethylene (PE-X) - Part 7: Guidance for the

assessment of conformity

DIN ISO/TS 15877-7

2010-02

Plastics piping systems for hot and cold water installations -

Chlorinated poly(vinyl chloride) (PVC-C) -Part 7: Guidance for the

assessment of conformity

DIN CEN IS0/TS 22391-7

03-2012-03

Plastics piping systems for hot and cold water installations –

Polyethylene of raised temperature resistance (PE-RT) – Part 7:

Guidance for the assessment of conformity

DIN CEN ISO/TS 21003-7

2010-12

Multilayer piping systems for hot and cold water installations

inside buildings – Part 7: Guidance for the assessment of

conformity

DVGW CERT

40014-11-N-DE

01/2017

Rules of procedure for the certification of products in non-

harmonised field

DVGW W 534

2015-07

Pipe connectors and pipe joints in drinking water installation

DVGW W 540

2010-08

Intrinsically safe apparatus for connection to the drinking water

installation

DVGW W 542

2009-08

Multiple layer piping systems in drinking water installation

DVGW W 543

2005-05

Pipe connectors and connections in drinking installation

Annex to the accreditation certificate D-IS-13119-01-00

Period of validity: 18.09.2017 to 07.11.2018 - Translation - 5/8

Date of issue: 01.12.2017

DVGW W 544

2007-05

Plastic pipes in drinking water installations

DVGW W 570-1

2013-03

Fittings for drinking water installation - Part 1: Requirements and

tests for building fittings

DVGW W 570-2

2008-01

Fittings for drinking water installation - Part 2: Requirements and

tests for safety valves

DVGW W 570-3

2013-12

Fittings in the drinking water installation - building and safety

fittings and / or combinations in special designs for applications

according to DIN EN 806 and DIN EN 1717 in conjunction with DIN

1988

DVGW W 579

2015-09

Sampling Valves in Drinking Water Installations - Requirements

and Tests

DVGW GW 335-A1

2003-06

Plastic pipeline systems in gas and water distribution ‐

requirements and testing ‐ part A1: PVC ‐ U pipes and fittings /

components for water distribution

DVGW GW 335-A2

2005-11

Plastic pipeline systems in gas and water distribution ‐

requirements and testing ‐ Part A2: PE 80 and PE 100

DVGW GW 335-B2

2004-09

Plastic pipeline systems in gas and water distribution ‐

requirements and testing ‐ part B2: PE 80 and PE 100 fittings

DVGW GW 335-B3

2011-09

Plastic pipeline systems in gas and water distribution ‐

requirements and testing ‐ part B3: mechanical connectors made

from plastics (POM, PP) for water distribution

DVGW GW 335-B4

2014-04

Plastic pipeline systems in gas and water distribution ‐ part B4:

fittings with metallic covering with mechanical or spigot and

socket connectors for water distribution

DVGW G 5614

2013-12

Permanent pipe joints for metal gas lines ‐ press connectors

DVGW G 5600-1

2014-02

Metallic material intersection connector for polyethylene gas

pipes ‐ Requirements and testing Section

DVGW W 574

2007-04

Sanitary valves as extraction fittings for drinking water

installation– Requirements and tests

Annex to the accreditation certificate D-IS-13119-01-00

Period of validity: 18.09.2017 to 07.11.2018 - Translation - 6/8

Date of issue: 01.12.2017

DVGW VP 615

1996-07

Pressure pipes, fittings and pipe connections from glass fibre

reinforced polyester resin (UP‐GF) for potable water pipelines

DVGW VP 640

2003-08-

Plastic pipeline systems in gas and water distribution ‐

requirements and testing ‐ PE‐Xb and PE‐Xc pipes

DIN Certco Certification

program (ZP) 2015-01

Plastic pipes and systems for warm water surface heating and

heating element connections

DIN Certco Certification

program (ZP) 2015-03

Plastic pipe system (pressure pipes and fittings)

DIN Certco Certification

program (ZP) 2015-03

Plastic pipe system (sewers and waste water pipes )

DB Standard DBS 918 064

2008-12-

Plastic pipes and fittings for drainage in train facilities

SKZ-HR 3.2

2015-04

Heating pipes made of crosslinked polyethylene PE-X

SKZ-HR 3.3

2015-04

Heating pipes made of polyethylene

SKZ-HR 3.12

2015-06

Heating pipes made of HDPE/AL/HDPE-multilayer pipe

SKZ-HR 3.13

2006-05

Heating pipes made of crosslinked polyethylene of medium

density PE-MDX

SKZ-HR 3.16

2015-04

Heating pipes made of polyethylene with raised temperature

resistance

SKZ-HR 3.26

2015-02

Geothermal Probes, Pipes and Fittings made of Polyethylene, PE

100, for Geothermal Products

INSTA-CERT

2012-02

General Rules for the services provided by INSTA-CERT Product

certification (GRC)

February 2012

INSTA SBC ISO 21003

2015-01

Specific rules for Nordic certification in accordance with ISO 21003

Multilayer piping systems for hot and cold water

installations inside buildings

Annex to the accreditation certificate D-IS-13119-01-00

Period of validity: 18.09.2017 to 07.11.2018 - Translation - 7/8

Date of issue: 01.12.2017

SVGW ZW 101

2016-01

General terms and conditions of SVGW Certification body Water,

SVGW ZertW

SVGW GW/TPG-TPW 101 d

2004-10

Regulations for the SVGW approval of pipes and piping system

parts of plastic for use in the gas and drinking water areas

SVGW ZW 106

2016-07

Waste fitting and Angled isolating valve

SVGW ZW 110

2016-01

Isolation valves

SVGW ZW 125

2016-01

Drinking water distribution systems with pipes made of PE-X

SVGW ZW 129

2016-01

Drinking water distribution systems with pipes made of PB

SVGW ZW 142

2016-01

Drinking water distribution systems with multilayer composite

pipes

KIWA BRL-K536 part D

15-12-2011

Evaluation guideline for the Kiwa (technical approval with)

product certificate for plastic piping systems of PE-X intended for

transport of hot and cold drinking water

KIWA BRL-K536 part E

15-12-2011

Evaluation guideline for the Kiwa (technical approval with-)

product certificate for plastic piping systems of PE-X /Al intended

for transport of hot and cold drinking water

KIWA BRL-K536 part G

15-12-2011

Evaluation guideline for the Kiwa (technical approval with-)

product certificate for plastic piping systems of PE-RT /Al intended

for transport of hot and cold drinking water

KIWA BRL-K774/06

01-02-2012

Evaluation guideline for the Kiwa product certificate for Compression

fittings to tighten with matching clamping device

KIWA GASTEC QA KE 186

November 2012

Approval Requirements 186 for the GASTEC QA product certificate

for press fittings for joining copper pipes

Executive order No. 666

of 20 May 2015

Danish Ministry of Transport and Building (Issue of approvals for

building components that come into contact with drinking water)

GDV/ Version 2.0 of 22 May

2015

Inspection guidelines for building components approved for

drinking water

Annex to the accreditation certificate D-IS-13119-01-00

Period of validity: 18.09.2017 to 07.11.2018 - Translation - 8/8

Date of issue: 01.12.2017

Abbreviations used:

BRL Beurteilungsrichtlinie (Specification for evaluation)

DBS Deutsche Bahn Standard

DIBt Deutsches Institut für Bautechnik

Competence Centre for Construction

DIN German Institute of Standardisation

DIN Certco DIN CERTCO certification body for conformity assessment

DVGW Deutsche Vereinigung des Gas- und Wasserfaches e.V.

German Association of Gas and Waterworks

EN European Standard

GASTEC QA Recognition specifications from KIWA

GW/TPG-TPW SVGW Prüf- / Zertifizierungsreglement

GDV Godkent til Drikkevand (Denmark) – Danish GDV scheme fee funded

approval scheme for building components in contact with drinking water

HR Testing and inspection requirements of SKZ

INSTA SBC Specific rules for Nordic certification

ISO International Organisation for Standardisation

KIWA Formerly: Keurings instituut voor waterleiding Artikelen (Dutch Test

Institute for drinking water articles) (Today: proper name)

QBI Quality management procedure of IMA-Dresden

SKZ Süddeutsches Kunststoffzentrum - South German Plastics Centre

SVGW Swiss Association of Gas and Waterworks

Z Building code approval of DIBT Competence Centre for Construction

ZP Certification programme of DIN-Certco