(( DAk!~SChe Akkreditierungsstelle
Deutsche Akkreditierungsstelle GmbH
Representative according to § 8 Section 1 AkkStelieG in connection with § 1 Section 1 AkkStelleGBV Signee in multilateral agreements of the EA, ILAC und IAF with mutual recognition
Accreditation
The Deutsche Akkreditierungsstelle GmbH herewith certifies that the testing laboratory
Forschungsinstitut der Zementindustrie GmbH Tannenstrasse 2 40476 Duesseldorf
has the competence according to DIN EN ISO/IEC 17025:2005 to perform checks in the following areas:
Civil engineering Construction products
This accreditation certificate is only valid in connection with the notification dating 24.07.2012 with the accreditation n~mber D-PL-16069-01 and expires on 18.06.2017. It consists of this cover page, the back of the cover page and the following Appendix, with in total 8 pages.
Registration number of this docurnent: D-PL-16069-01-02
Thls document Is a translation. The definitive version Is the original Gennan accredftatlon certlflcate.
Berlin, 24.07.2012 gez. Norbert Barz Managing director
Deutsche Akkreditierungsstelle GmbH
(( DAkkS Deutsche Akkreditierungsstelle
Annex of the Accreditation Certificate D-PL-16069-01-02 according to DIN EN ISO/lEe 17025:2005
Validity period: 24.07.2012 to 18.06.2017
Holder of the certificate:
Forschungsinstitut der Zementindustrie GmbH Tannenstrasse 2 40476 Duesseldorf
Testing in the area of:
Domain dviJ engineering I Construction products
Area: Constructlon products and materials with the test types chemical analysis, physical-technological analyses
Abbreviations used: see last page
Thls document 15 a translation. The definitiva versfon ts the orlalnal German annex to the accredtlatlon certlficate.
(( DAkkS Deutsche
Annex of the Accredltatlon Certlflcate D-PL-16069-01-02
1. Domain: Civil engineering / Construction products
1.1 Chemieal analyses
Sfandllril/Issue date' In-house procedure / Title of the standard or in-house procedure
ve~i9n
HM-No. 0006 FIZ 2005-08 Ion chromatographie determination of anions (Rev.-5) and catlons in aqueous solutions, determination
of LI, Na, K, Ca, CI, NO" 50, DIN EN 196-7:2008-02 Methods oftesting cement - Part 7: Methods of
takingand preparing sampies of cement
DIN 1164-31:1990-03 Portland-, Iron Portland-, blast furnace- and trass cement; withdrawn determination of granulated blast-furnace si ag of iron
Portland and blast furnace cement and trass content of trass cement
HM-No. 0029 FIZ 2001-08 Determination of the glass conte nt of granulated blast (Rev. 1) furnace slag
HM-No. 0007 FIZ 2001-08 XRF analytical determination von maln and minor
(Rev. 1) constituents in cement and other solid substances
Determination of SiO" AI,D" no" P,O., Fe,O" Mn,O" CaO, MgO, 50" KzO, NazO, 52., CI, O2 equivalent, C,S, C2S, C,A, C,AF, C,F, KS, TM, SM, 5G, CUE and calculation of the composltion of cements with more than one maln constituent
HM-No. 0008 FIZ 2002-09 IR-spectroscopic carbon dioxide and (Rev. 2) water content determination
HM-No. 0009 FIZ 2002-09 IR-spectroscopic determination of sulphate using the Leco
(Rev.2)
HM-No. 0010 FIZ 2002-06 Flow injection atomic absorption spectrometry (Rev. 1) (determination of mercury)
HM-No. 0011 FIZ 2002-06 Determination of metals and semi-metals using
(Rev.2) a graphite AAS (additions method); Determination of As, Be, Cd, Co, Cr, Cu, Ni, Pb, Sb,
Se, TI, V, Zn
HM-No. 0012 FIZ 2003-08 Flame AAS (determination of metals and
(Rev. 1) semi-metals), determination of AI, As, Ba, Ca, Cd, Co, er, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sb, Si, Sn, TI, V, Zn
DIN EN 196-2:2005-05 Methods of testing cement - Part 2: Chemical analysis of cement; Section 7: Determination of loss on ignition; modifjcation: the test specimen is slowly heated to glowing temperature without platlnum lid
DIN EN 196-2:2005-05 Methods of testing cement - Part 2: Chemical analysis of cement; Section 8: Determination of sulphate
DIN EN 196-2:2005-05 Methods oftesting cement - Part 2: Chemieal analysis of cement; Section 9: Determination of the residue insoluble in hydrochloric acid and sodium carbonate
Valldlty period: 24_07.2012 to 18.06.2017 Translation
Akkred iti e ru n gsste 11 e
Test item
50lutions
BInding agents
Cement
Granulated blast furnace slag
Solid matter
Cement, binding agents contalning cement
Cement, binding agents contalnlng cement
Solid matter, solutions
Solid matter, solutions
Solid matter, solutions
Solid matter
Solid matter
Cement
2/7
(( DAkkS Deutsche Akkreditierungsstelle Annex of the Accredltatlon Certiflcate D-PL-16069-01-02
Stanifard Iissue date
In-house procedure I litle oHhe mndard or In-house procedure Testltem
Ver~lQ.n.
DIN EN 196-2:2005-05 Methods of testing cement - Part 2: Chemical analysis of Solid matter cement; Sectlon 11: Determination of sulphide; Modificatlon: Ammoniac cadmium chloride solution is used instead of zinc sulphide solution
DIN EN 196-2:2005-05 Methods of testing cement - Part 2: Chemieal analysis of Solid matter cement; Section 14: Determination of the chloride content;
DIN EN 196-2:2005·05 Methods of testing cement - Part 2: Chemical analysis of Solid matter cement; Section 18: Determination of the alkaline content (alternative procedure)
HM-No. 0013 FIZ 2002-06 Determination of 21 metals and semi-metals using Solid matter, solutions (Rev.2) ICP-MS, determination of As, Ba, Be, Cd, Co, Cr, Cu,
Mn, Mo, NI, Pb, Pd, Pt, Rh, Sb, Sn, Sr, Te, TI, V, Zn
HM-No. 0014 FIZ 2005-02 Benzole, toluol, ethyl benzene, xylene (0-, m-, po), Air, solid matter (Rev.4) unbranched C8-C10-alkanes / Gaschromatographie
analysis / elution using CS, with C.HFs as internal standard / splitinj. Detection: FID
HM-No. 0015 FIZ 2007-01 PCB-PAH determination in mineral oil according to DIN EN Solutions (Rev.1) 12766-1
HM-No. 0016 FIZ 2007-01 PCB-PAH determination in solid waste, soil and sludge Solid matter (Rev.1) according to DIN EN 15111
TRGS 613 TRGS 613 - Substitute materials, replacement procedures Cement Issue 10/2002 cancelled and restrietions in use of cements containing chromate and
12/2006 of cement preparations contalnlng chromate, photometrie determination of the Cr(VI) ion
DIN EN 196-10:2006-10 Methods of testing cement - Part 10: Determination of the Cement water-soluble chromium (VI) conte nt in cement
DIN EN 196-5:2011-06 Methods oftesting cement - Part 5: Pozzolanicity test for Cement pozzolanic cement
HM-No. 0017 FIZ 2002-02 Determination of the free lime content in cements and Cement, dinker (Rev.1) dinkers
HM-No. 0030 FIZ 2003-04 Sem i-quantitative determination of chloride in cement Cement (Rev.1)
DIN EN 196-8:2010:07 Methods of testing cement - Part 8: Heat of hydration - Cement Solution method
HM-No. 0018 FIZ 2005-04 Determination of the heat of hydration of cement using a Cement (Rev. 1) heat now calorimeter TAM-Air
DIN EN 933-9:2009-10 Tests for geometrical propertles of aggregates - Part 9: limestone Assessment of fines - Methylene blue test
DIN S1900-1; 2000-04 and Testing of solid and liquid fuels - Determination of gross Fuel Amendment 1: 2004-02 calorific value by the bomb calorimeter and calculation of
net calorific value - Part 1 Prlnciples, apparatus, methods
DIN EN 15400:2011-05 Solid recovered fuels - Determination of calorific value Solid recovered fuels
Valldlty period: 24.07.2012 to 18.06.2017 Translation 3/7
(( DAkkS Deutsche Akkreditierungsstelle Anne. of the Aeeredltatlon Certilleate D-Pl-16069-01-02
Sfu nda rd IIs'sue date In-house procedure I Tltle of'th,e standard or-in-house procedure Test Itern
Version - ,.,
HM-No. 0042 FIZ 2011-01 Determination of the proportion of ground granulated Cement, binding agents blast-furnace slag in cement using X-rav diffraction / containing cement Rietveld analvsis
HM-No. 0043 FIZ 2011-01 X-rav dlffraction analvsls Cement, binding agents containlng cement
HM-No. 0033 FIZ 2011-01 Determination of the proportion of ground granulated Cement, binding agents blast-furnace 51 ag bV X-rav diffraction analvsis containing cement
DIN EN 450-1:2008-05 FIV ash for concrete - Part 1: Definitions, specifications and Flv-ash conformitv criteria Annex C: Determination of soluble phosphate (P,Os) content
HM-No. 0032 FIZ 2011-01 Fluoride determination according to See I Solid matter
HM-No. 0031 FIZ 2002-02 Gravimetric determination of the sulphite content solid Solid matter (Rev.1) matter
DIN S2170-2:1980-02 Determination of composition of hardened concrete; Concrete, mortar hvdrochloric acid insoluble aggregate, materials used for the concrete not available Determination of the composltion of hardened concrete;
DIN 52170-3:1980-02 hvdrochloric acid insoluble supplement, materials used not avallable
DIN EN 197-1:2004-08 Cement - Part 1: Composition, specifications and Cement, f1V-ash, DIN EN 197-1:2011-11 conformity criteria fOT cammon cements
Reactlve calcium oxide (CaO) according to Sectlon 3.1 pOllolana
Reactive silicon dioxide (SiO,) accordlng to Section 3.2
DIN EN 15167-1:2006-12 Ground granulated blast furnace slag for use in concrete, Granulated blast mortar and grout - Part 1: Definitions, specificatlons and furnace slag conformitv criteria Annex A: Method for determination of moisture content of ground granulated blast-furnace slag
DIN EN 15414-3:2011-05 Solid recovered fuels - Determination of moisture content Solid recovered fuels using the oven dry method - Part 3: Moisture in general analvsls sam pie
DIN 51718:2002-06 Testing of solid fuels - Determination of the water content Solid fuels and molsture of analvsls sam pie
DIN technical report Methods of testing cement - Part 4: Quantitative Cement CEN/TR 196-4:2007-11 determination of constituents
DIN EN 15440:2011-05 Solid recovered fuels - Methods for the determination of Solid recovered fuels biomass content Determination of the biomass content uSing the selective dissolution method Annex 8
Validltv period: 24.07.2012 to 18.06.2017 Translation 4/7
(( DAkkS Deutsche Akkreditierungsstelie Annex of the Aeeredltatlon Certlfleate O-PL-16069-01-02
Stanqafd / Is~ue dat_~ In,l\ouse procedure / :ritle ofthe standar~ or In-house RrOc~du[e Test I~e~
VersIon , , . ,
DIN EN ISO 787-3 :2001-09 General methods of test for pigments and extenders - Part Colour pigments 3: Determination of matter soluble In water, Hot extractlon method Modificatlon: Determination of NO,', 50;- and CI' using Ion chromatogra phy
DIN EN 13639:2002-()7 and Determination of total organic carbon in limestone Solid matter Amendment 1:2006-09 Alternative method 1/ Burning of the hydrochloric residue
and binding of the CO, NaOH, CO, determination gravimetrie
DIN EN 13639:2002-07 and Determination of total organie carbon in limestone Solid matter Amendment 1:2006-09 Alternative method 3 / Burning of the hydrochloric residue
and IR spectrometry CO, deteetion DIN EN 1484:1997-08 Water analysis - Guidelines for the determination of total
organic carbon (TOe) and dissolved organic carbon (DOC) Aqueous sampies
DIN EN 15402:2011-05 Solid recovered fuels - Determination of the conte nt of Solid recovered fuels volatile matter
DIN 51720:2001-03 Testing of solid fuels - Determination ofvolatile matter Solid fuels content
DIN EN 15403:2011-05 Solid recovered fuels - Determination of ash content Solid recovered fuels
DIN 51719:1997-07 Testing of solid fuels - Determination of ash content Solid fuels
DIN EN 15407:2011-05 Solid recovered fuels - Methods for the determination of Solid recovered fuels carbon (e), hydrogen (H) and nitrogen (N) Modification: also determination of sulphur (5)
DIN 51732:2007-08 Testing of solid mineral fuels - Determination of total Solid fuels carbon, hydrogen and nitrogen - Instrumental methods Modification: also determination of sulphur
DIN EN 15408:2011-05 Solid recovered fuels - Method for determination of Solid recovered fuels sulphur (5), chlorine (CI), fluorine (F), and bromine (Br) content
DIN EN 14582:2007-06 Characterlsatlon of waste - Halogen and sulphur content- Solid fuels Oxygen combustion in elosed systems and determination methods
VDI 4320 Sheet 2 (2012- Measurement of atmospherie depositions - Determination Solid matter, dust 01) of the dust deposition according to the Bergerhoff method
HM-No. 0019 FIZ 2002-06 Determination of metals and semi-metals using ICP-MS, Solid matter (Rev. 2) determination von As, Be, Cd, Co, er, Cu, Mn, Ni, Pb, Pd, Pt,
Rh, Sb, Sn, Te, TI, V, Zn HM-No. 0020 FIZ 2002-06 Flow injection atomic absorption spectrometry for Solid matter (Rev. 1) determination of mercury
HM-No. 0021 FIZ 2002-06 Determination of metals and semi-metals using graphite Solid matter (Rev.2) AAS, determination of As, Co, Se, TI, V
1.2 Physical-technological analyses
Valldity period: 24.07 .2012 to 18.06.2017 Translation 5/7
(( DAkkS Deutsche Akkredltierungsstelle Annex of the Accreditation Certlflcate D-PL-16069-01-02
Stän!!ard / I.ssue date In-house procedure I ;rltle of the Stärf~ard or In-house I!rocedure Test item
Versl~1'I
DIN EN 196-1:2005-05 Methods oftesting cement - Part 1: Determination of Cement strength
DIN 18506:2002-02 Hydraulic road binders - Hydraulic binding agents Composition, specifications and
eonformity criteria DIN EN 15167-1:2006-12 Ground granulated blast furnaee si ag for use in conerete, Cement, sand, ground
mortar and grout - Part 1: Definitions, specifieatlons and granulated blast furnace eonformity criteria slag Determination of the time to the Initial set aceording to Section 5.3.2.2 Determination of the activity index according to Sectlon 5.3.2.3
DIN EN 450-1:2008-05 Fly ash for concrete - Part 1: Definition, specifications and Cement, sand, fly ash conformity crlteria Determination of the activity index according to Section 5.3.2 Determination of the time to the Initial set according to Section 5.3.5
DIN EN 413-1:2004-05 Masonry eement - Part 1: Compositlon, Hydraulie binding agents DIN EN 413-1 :2011-07 speeifieations and eonformity erlteria
DIN EN 196-3:2009-02 Methods oftesting cement - Part 3: Determination of Cement, binding agents setting times and soundness eontalning cement
0 Testing soundness 0 Testing normal hardness 0 Determination of setting tlmes using the Vicat
apparatus
HM-No. 0001-FIZ 2006-01 Determination of the time to the Initial set using the Cement, binding agents automatie Vicat needle apparatus "ToniSET" containing cement
DIN EN 413-2:2005-08 Masonry cement - Part 2: Test methods Masonry cement 0 Determination of consistency offreshly mixed
mortar using the stiftness measuring device, f10w table
0 Determination of the water retaining ability 0 Determination of the air conte nt using the
eaualization of pressure method
DIN EN 196·6:2010·05 Methods of testing cement - Part 3: Determination of Cement, powders fineness
Air porosity procedure (proeedure according to Blaine)
HM-No. 0002 FIZ 2006-01 Determination of fineness using the Blaine apparatus Powders
(Rev.-3) "System Dyckerhoff"
DIN EN 1097-7:2008-06 Tests for mechanical and physieal properties of aggregates Filler
and Amendment 1:2008-- Part 7: Determination ofthe partlcie denslty offiller-
09 Pyknometer method
Validlty period: 24.07.2012 to 18.06.2017 Translation 6/7
(( DAkkS Deutsche Akkreditierungsstelle Annex of the AeeredltaUon Certlfleate D-PL-16069-01-02
Standard Iissue .dat~~ In-Ilouse procedure / TItle of the Standard or In-Ilouse pr'ocedure Test-itJ!m
Verstoll
HM-No.0003 FIZ 2002-05 Determination of the slevlng resldue and preparatlon of Powders (Rev.-3) aggregate fraetlons
HM-No. 0004 FIZ 2001-09 Determination of the partide size distribution of dose- Close-gralned (Rev.-3) grained substanees uslng the air jet sleving maehlne substanees
HM-No. 0005 FIZ 2000-09 Determination of the partlde-slze distribution of dose- Close-gralned (Rev.-3) gralned substanees uslng the vlbratory sleve substanees
DIN EN 933-10:2009-10 Tests for geometrlcal properties of aggregates - Part 10: Filter Assessment of fines - Grading of filler aggregates (air Jet sleving)
HM-No. 0050 FIZ 2011-01, Flneness of fly ash for eoncrete aeeordlng to the test In DIN Fly-ash eorresponding to EN 933-10 for geometrieal properties of aggregates
DIN EN 933-10
DIN EN 196-6:2010-05 Methods of testing eement - Part 6: Determination of Cement and binding fineness agents eontaining Sieving method aeeording to Seetion 3 eement Air Jet sieving method aeeording to Seetion 5
Abbreviations used:
DIN German Institute for Standardisation e.V.
EN European Standard
HM KBS In-house method
Valldlty period: 24.07.2012 to 18.06.2017 Translation 7/7