DG 75 PNThree phase industrial vacuum with automatic reverse pulse filter cleaning
DG 75 PNThree phase industrial vacuum with automatic reverse pulse filter cleaning
The DG 75 PN is the "PN" version with reverse airflow filter-cleaning system.
It is equipped with cartridge filters (antistatic class M filter in option) which are constantly and frequentlycleaned by means of powerful jets of compressed air. Reverse pulse filter cleaning is the most efficientsystem when vacuuming fine, dry or clogging dust, especially when used on continuous duty or tocollect large volumes of dust.
• Maintenance free motor suitble for 24/7 continous duty.• Tangential suction inlet with integrated cyclone and pressure relief valve.• Can vacuum dust, liquid and solid at the same time.
DG 75 PN
Product tab
Power V 400 3~
Frequency Hz 50
Power kW 7,5
Depression mmH2O 4000
Depression ( continuous service) mmH2O 3200
Airflow max m3/h 530
Surface cm2 49000
Filtration class ( primary filter) (IEC 60335-2-69) L
Filter surface ( HEPA filter) cm2 52000
Filtration class ( HEPA filter) (EN1822) H14
Air load on primary filter m3/m2/h 108.00
Capacity lt 100
Suction inlet diameter mm 80
Sound level dB(A) 76
IP protection / Ins.Cl. IP 55
Dimensions cm 66 x 118 x 175
Weight kg 170