24.00 SERVICE CLEARANCE 36.00 SERVICE CLEARANCE 28.00 DH WHEEL SERVICE CLEARANCE (FROM TOP OF UNIT) LIFTING LUGS (4) 5.00 4.00 A A FILTER/MOTOR ACCESS PIPING VESTIBULE/SUPPLY SECTION A-A DH/FAN ACCESS PANEL FAN ACCESS REACT. BURNER & FILTER ACCESS DESICCANT WHEEL (660mm x 200mm) (OPTION) REACT. DISCHARGE HOOD (10" OR 12" OPTION) REACT. DISCHARGE DUCT COLLAR (18" OR 20" OPTION) R/A DUCT COLLAR (18" OR 20" OPTION) S/A DUCT COLLAR (OPTION) REACT. INLET HOOD REACT. INLET DUCT COLLAR (10" OR 12" OPTION) REACT. AIR FLOW RETURN AIR FLOW REACT. AIR FLOW 3.00 70.00 3.00 72.75 ENGLISH AND FRENCH. ALL UNITS OF MEASURE MUST BE IN ENGLISH AND METRIC VALUES. 3.) BASE IS FOR PAD, RAIL OR CURB MOUNTING. 4.) UNIT SHIPS IN ONE PIECE WEIGHING APPROXIMATELY 900 LBS. NOTES: 1.) UNIT IS CONSTRUCTED FOR WEATHERIZED APPLICATIONS. CASING IS 2" DOUBLE WALL CONSTRUCTION USING G-90 GALVANIZED EXT. CASING AND S.S. INTER. CASING. UNIT IS FULLY INSULATED WITH 2" THICK 3# DENSITY FIBERGLASS INSULATION. 2.) ALL DECALS AND NAMEPLATES MUST BE IN AIR FLOW SUPPLY ELECTRICAL ACCESS (MUST REMOVE ROOF PANEL) PENETRATION APPROX. PIPING APPROX. ELECT. PENETRATION 9.50 32.00 34.75 47.00 TYP. TYP. 14.50 TYP. 30.25 10.75 TYP. DIMENSIONS ARE IN INCHES B LOCATION: CAD FILE: - DESIGNS, INC. REV REVISION DESCRIPTION DATE BY - - - - - - - - - - - - - - - - 45684041 TOP LEVEL ASSY # - - - - UNLESS OTHERWISE SPECIFIED - SCALE: MODEL: CAD GENERATED DRAWING, - SHEET 1 OF 1 I N C O R P O R A T E D TAG (S): DWG. NO. - REV. DATE DRAWN - PROJECT: SIZE - CHECKED DO NOT MANUALLY UPDATE WITHOUT THE EXPRESSED WRITTEN CONSENT OF CONCEPTS AND IT IS NOT TO BE USED, COPIED, OR DISCLOSED TO OUTSIDE PARTIES THE INFORMATION HEREON IS TO BE TREATED AS CONFIDENTIAL. THIS DRAWNING IS THE PROPERTY OF CONCEPTS AND DESIGNS, INC. www.cdihvac.com 126-2.0 STAT. 230V-1PH-GAS Concepts and Designs CDH-126-2.0/230/1/GAS 2100 Park Drive NW Owatonna, MN 55060 phone: 507.451.2198 fax: 507.451.1177 APPROVALS CDH-126-2.0-DSOEELOR CFM @ ESP 2000 @ 2.0 W.C. BHP / RPM 2.02 / 3450 BLOWER MODEL 121 APF SWSI, CLS 2 100% MOTOR HP / RPM 3 / 3450 MOTOR TYPE ODP MOTOR FLA 12.5 FILTER SIZE & QTY (3) 12" x 16" x 2" FILTER STYLE PERMANENT CFM @ ESP 553 @ 0.5 W.C. BHP / RPM .87 / 3450 BLOWER MODEL JRW 806N SWSI, CLS 1 MOTOR HP / RPM 1-1/2 / 3450 MOTOR TYPE ODP MOTOR FLA 6.5 FUEL TYPE PROPANE/NATURAL GAS PRESSURE 7" - 14" W.C. PIPING DIAGRAM NO. CDH-126-2.0 PIPING FILTER SIZE & QTY (1) 12" x 16" x 2" FILTER STYLE PERMANENT 230V 1-PHASE 60HZ 20 25 30 AMP 25100350, 25100356 UNIT MCA MOP UNIT INFORMATION MODEL NO. ELECTRICAL DWG NO. REACTIVATION SUPPLY SUPPLY VOLTAGE UNIT FLA
Transcript
24.00
SERVICE
CLEARANCE
36.00
SERVICE
CLEARANCE
28.00
DH WHEEL
SERVICE CLEARANCE
(FROM TOP OF UNIT)
LIFTING LUGS (4)
5.00
4.00
A A
FILTER/MOTOR ACCESS
PIPING VESTIBULE/SUPPLY
SECTION A-A
DH/FAN ACCESS PANEL
FAN ACCESS
REACT. BURNER &FILTER ACCESS
DESICCANT WHEEL(660mm x 200mm)
(OPTION)REACT. DISCHARGE HOOD
(10" OR 12" OPTION)REACT. DISCHARGE DUCT COLLAR
(18" OR 20" OPTION)R/A DUCT COLLAR
(18" OR 20" OPTION)S/A DUCT COLLAR
(OPTION)REACT. INLET HOOD
REACT. INLET DUCT COLLAR(10" OR 12" OPTION)
REA
CT.
AIR
FLO
W
RETU
RN
AIR
FLO
W
REA
CT.
AIR
FLO
W
3.00
70.00
3.00
72.75
ENGLISH AND FRENCH. ALL UNITS OF MEASUREMUST BE IN ENGLISH AND METRIC VALUES.
3.) BASE IS FOR PAD, RAIL OR CURB MOUNTING.
4.) UNIT SHIPS IN ONE PIECE WEIGHING APPROXIMATELY 900 LBS.
NOTES:
1.) UNIT IS CONSTRUCTED FOR WEATHERIZED APPLICATIONS. CASING IS 2" DOUBLE WALL CONSTRUCTION USING G-90 GALVANIZED EXT.CASING AND S.S. INTER. CASING. UNIT IS FULLY INSULATED WITH 2" THICK 3# DENSITY FIBERGLASS INSULATION.
2.) ALL DECALS AND NAMEPLATES MUST BE IN
AIR
FLO
WSU
PP
LY
ELECTRICAL ACCESS(MUST REMOVE ROOF PANEL)
PENETRATIONAPPROX. PIPING
APPROX. ELECT.PENETRATION
9.50
32.00
34.75
47.00
TYP.
TYP.
14.50
TYP.
30.25
10.75
TYP.
DIMENSIONS ARE IN INCHES
B
LOCATION:
CAD FILE:
-
DESIGNS, INC.
REV REVISION DESCRIPTIONDATE BY- - --
-
-
-
-
-
-
-
-
-
-
-
-
45684041
TOP LEVEL ASSY #
- ---
UNLESS OTHERWISE SPECIFIED
-
SCALE: MODEL:
CAD GENERATED DRAWING,
-
SHEET 1 OF 1
I N C O R P O R A T E D
TAG (S):
DWG. NO.
-
REV.
DATE
DRAWN
-
PROJECT:
SIZE
-
CHECKED
DO NOT MANUALLY UPDATE
WITHOUT THE EXPRESSED WRITTEN CONSENT OF CONCEPTS ANDIT IS NOT TO BE USED, COPIED, OR DISCLOSED TO OUTSIDE PARTIES THE INFORMATION HEREON IS TO BE TREATED AS CONFIDENTIAL.THIS DRAWNING IS THE PROPERTY OF CONCEPTS AND DESIGNS, INC.
www.cdihvac.com
126-2.0 STAT. 230V-1PH-GAS
Concepts and Designs
CDH-126-2.0/230/1/GAS
2100 Park Drive NWOwatonna, MN 55060phone: 507.451.2198fax: 507.451.1177
APPROVALS
CDH-126-2.0-DSOEELOR
CFM @ ESP 2000 @ 2.0 W.C.BHP / RPM 2.02 / 3450BLOWER MODEL 121 APF SWSI, CLS 2 100%MOTOR HP / RPM 3 / 3450MOTOR TYPE ODPMOTOR FLA 12.5FILTER SIZE & QTY (3) 12" x 16" x 2"FILTER STYLE PERMANENT
CFM @ ESP 553 @ 0.5 W.C.BHP / RPM .87 / 3450BLOWER MODEL JRW 806N SWSI, CLS 1MOTOR HP / RPM 1-1/2 / 3450MOTOR TYPE ODPMOTOR FLA 6.5FUEL TYPE PROPANE/NATURALGAS PRESSURE 7" - 14" W.C.PIPING DIAGRAM NO. CDH-126-2.0 PIPINGFILTER SIZE & QTY (1) 12" x 16" x 2"FILTER STYLE PERMANENT
230V 1-PHASE 60HZ202530 AMP25100350, 25100356
UNIT MCAMOP
UNIT INFORMATION
MODEL NO.
ELECTRICAL DWG NO.
RE
AC
TIV
AT
ION
SU
PP
LY
SUPPLY VOLTAGEUNIT FLA
24.00
SERVICE
CLEARANCE
36.00
SERVICE
CLEARANCE
28.00
DH WHEEL
SERVICE CLEARANCE
(FROM TOP OF UNIT)
REACT. INLET HOOD(OPTION)
(OPTION)REACT. DISCHARGE HOOD
(10" OR 12" OPTION)REACT. DISCHARGE DUCT COLLAR
S/A DUCT COLLAR(18" OR 20" OPTION)
(10" OR 12" OPTION)REACT. INLET DUCT COLLAR
R/A DUCT COLLAR(18" OR 20" OPTION)
DESICCANT WHEEL(660mm x 300mm)
REA
CT.
AIR
FLO
W
RETU
RN
AIR
FLO
W
SU
PP
LYA
IR F
LOW
REA
CT.
AIR
FLO
W
70.00
72.75
3.00 3.00
BY
B
LOCATION:
CAD FILE:
-
DESIGNS, INC.
REV REVISION DESCRIPTIONDATE- --
-
-
-
-
-
-
-
-
-
-
-
-
TOP LEVEL ASSY #
-
45684061
--
UNLESS OTHERWISE SPECIFIED
CAD GENERATED DRAWING,
-
-
-
SCALE: MODEL:
DWG. NO.
DRAWN
SHEET 1 OF 1
I N C O R P O R A T E D
TAG (S):
SIZE
-
REV.
DATE
www.cdihvac.com
-
PROJECT:
Concepts and Designs
-
CHECKED
DO NOT MANUALLY UPDATE
WITHOUT THE EXPRESSED WRITTEN CONSENT OF CONCEPTS ANDIT IS NOT TO BE USED, COPIED, OR DISCLOSED TO OUTSIDE PARTIES THE INFORMATION HEREON IS TO BE TREATED AS CONFIDENTIAL.THIS DRAWNING IS THE PROPERTY OF CONCEPTS AND DESIGNS, INC.
CDH-126-2.0/460/3/ELEC
126-2.0 STAT. 460V-3PH-ELEC
-
DIMENSIONS ARE IN INCHES
2100 Park Drive NWOwatonna, MN 55060phone: 507.451.2198fax: 507.451.1177
APPROVALS
LIFTING LUGS (4)
5.00
4.00
A A
ELECTRICAL ACCESS(MUST REMOVE ROOF PANEL)
APPROX. ELECT.PENETRATION
9.50
34.75
32.00
TYP.
TYP.
30.25
TYP.
47.00
14.50
10.75
TYP.
REACT. ELECTRICAL &FILTER ACCESS
SECTION A-A
DH/FAN ACCESS PANEL
FILTER/MOTOR ACCESS
SUPPLY FAN ACCESS
NOTES:
1.) UNIT IS CONSTRUCTED FOR WEATHERIZED APPLICATIONS. CASING IS 2" DOUBLE WALL CONSTRUCTION USING G-90 GALVANIZED EXT.CASING AND S.S. INTER. CASING. UNIT IS FULLY INSULATED WITH 2" THICK 3# DENSITY FIBERGLASS INSULATION.
2.) ALL DECALS AND NAMEPLATES MUST BE INENGLISH AND FRENCH. ALL UNITS OF MEASUREMUST BE IN ENGLISH AND METRIC VALUES.
3.) BASE IS FOR PAD, RAIL OR CURB MOUNTING.
4.) UNIT SHIPS IN ONE PIECE WEIGHING APPROXIMATELY 900 LBS.
CDH-126-2.0-ESOEELOR
CFM @ ESP 2000 @ 2.0 W.C.BHP / RPM 2.02 / 3500BLOWER MODEL 121 APF SWSI, CLS 2 100%MOTOR HP / RPM 3 / 3600MOTOR TYPE TEFCMOTOR FLA 4.1FILTER SIZE & QTY (3) 12" x 16" x 2"FILTER STYLE PERMANENT
CFM @ ESP 553 @ 0.5 W.C.BHP / RPM .87 / 3500BLOWER MODEL JRW 806N SWSI, CLS 1MOTOR HP / RPM 1-1/2 / 3600MOTOR TYPE TEFCMOTOR FLA 2.1HEATER TYPE ELECTRIC / 35KW / 44 AMPSFILTER SIZE & QTY (1) 12" x 16" x 2"FILTER STYLE PERMANENT
WITHOUT THE EXPRESSED WRITTEN CONSENT OF CONCEPTS ANDIT IS NOT TO BE USED, COPIED, OR DISCLOSED TO OUTSIDE PARTIES THE INFORMATION HEREON IS TO BE TREATED AS CONFIDENTIAL.THIS DRAWNING IS THE PROPERTY OF CONCEPTS AND DESIGNS, INC.
www.cdihvac.com
126-2.0 STAT. 460V-3PH-GAS
Concepts and Designs
CDH-126-2.0/460/3/GAS
2100 Park Drive NWOwatonna, MN 55060phone: 507.451.2198fax: 507.451.1177
APPROVALS
NOTES:
1.) UNIT IS CONSTRUCTED FOR WEATHERIZED APPLICATIONS. CASING IS 2" DOUBLE WALL CONSTRUCTION USING G-90 GALVANIZED EXT.CASING AND S.S. INTER. CASING. UNIT IS FULLY INSULATED WITH 2" THICK 3# DENSITY FIBERGLASS INSULATION.
2.) ALL DECALS AND NAMEPLATES MUST BE INENGLISH AND FRENCH. ALL UNITS OF MEASUREMUST BE IN ENGLISH AND METRIC VALUES.
3.) BASE IS FOR PAD, RAIL OR CURB MOUNTING.
4.) UNIT SHIPS IN ONE PIECE WEIGHING APPROXIMATELY 900 LBS.
R/A DUCT COLLAR(18" OR 20" OPTION)
(OPTION)REACT. DISCHARGE HOOD
(10" OR 12" OPTION)REACT. DISCHARGE DUCT COLLAR
(10" OR 12" OPTION)REACT. INLET DUCT COLLAR
(OPTION)REACT. INLET HOOD
(18" OR 20" OPTION)S/A DUCT COLLAR
DESICCANT WHEEL(660mm x 200mm)
CDH-126-2.0-DSOEELOR
CFM @ ESP 2000 @ 2.0 W.C.BHP / RPM 2.02 / 3500BLOWER MODEL 121 APF SWSI, CLS 2 100%MOTOR HP / RPM 3 / 3600MOTOR TYPE TEFCMOTOR FLA 4.1FILTER SIZE & QTY (3) 12" x 16" x 2"FILTER STYLE PERMANENT
CFM @ ESP 553 @ 0.5 W.C.BHP / RPM .87 / 3500BLOWER MODEL JRW 806N SWSI, CLS 1MOTOR HP / RPM 1-1/2 / 3600MOTOR TYPE TEFCMOTOR FLA 2.1FUEL TYPE PROPANE/NATURALGAS PRESSURE 7" - 14" W.C.PIPING DIAGRAM NO. CDH-126-2.0 PIPINGFILTER SIZE & QTY (1) 12" x 16" x 2"FILTER STYLE PERMANENT
460V 3-PHASE 60HZ6.88.515 AMP25100347, 25100356
UNIT MCAMOP
UNIT INFORMATION
MODEL NO.
ELECTRICAL DWG NO.
RE
AC
TIV
AT
ION
SU
PP
LY
SUPPLY VOLTAGEUNIT FLA
28.00
DH WHEEL
SERVICE CLEARANCE
(FROM TOP OF UNIT)
24.00
SERVICE
CLEARANCE
36.00
SERVICE
CLEARANCE
APPROX. PIPINGPENETRATION
(MUST REMOVE ROOF PANEL)ELECTRICAL ACCESS
APPROX. ELECT.PENETRATION
9.50
34.75
32.00
47.00
TYP.
TYP.
14.50
TYP.
30.25
10.75
TYP.
REA
CT.
AIR
FLO
W
REA
CT.
AIR
FLO
W
3.00
70.00
72.75
3.00
-
B
LOCATION:
CAD FILE:
-
DESIGNS, INC.
REV REVISION DESCRIPTIONDATE
DIMENSIONS ARE IN INCHES
-
-
-
-
-
-
-
-
UNLESS OTHERWISE SPECIFIED
-
-
--
-
-
-
45684020
-
TOP LEVEL ASSY #
- --
DRAWN
-
SCALE: MODEL:
-
BY
SHEET 1 OF 1
I N C O R P O R A T E D
TAG (S):
CAD GENERATED DRAWING,
-
REV.
DATE
SIZE
-
PROJECT:
www.cdihvac.com
-
CHECKED
DO NOT MANUALLY UPDATE
WITHOUT THE EXPRESSED WRITTEN CONSENT OF CONCEPTS ANDIT IS NOT TO BE USED, COPIED, OR DISCLOSED TO OUTSIDE PARTIES THE INFORMATION HEREON IS TO BE TREATED AS CONFIDENTIAL.THIS DRAWNING IS THE PROPERTY OF CONCEPTS AND DESIGNS, INC.
Concepts and Designs
126-2.0 STAT. 575V-3PH-GAS
CDH-126-2.0/575/3/GASDWG. NO.
2100 Park Drive NWOwatonna, MN 55060phone: 507.451.2198fax: 507.451.1177
APPROVALS
REACT. DISCHARGE DUCT COLLAR(10" OR 12" OPTION)
(18" OR 20" OPTION)R/A DUCT COLLAR
(18" OR 20" OPTION)S/A DUCT COLLAR
(OPTION)REACT. DISCHARGE HOOD
(OPTION)REACT. INLET HOOD
(10" OR 12" OPTION)REACT. INLET DUCT COLLAR
DESICCANT WHEEL(660mm X 200mm)
AIR
FLO
WSU
PP
LY
ENGLISH AND FRENCH. ALL UNITS OF MEASUREMUST BE IN ENGLISH AND METRIC VALUES.
3.) BASE IS FOR PAD, RAIL OR CURB MOUNTING.
4.) UNIT SHIPS IN ONE PIECE WEIGHING APPROXIMATELY 900 LBS.
NOTES:
1.) UNIT IS CONSTRUCTED FOR WEATHERIZED APPLICATIONS. CASING IS 2" DOUBLE WALL CONSTRUCTION USING G-90 GALVANIZED EXT.CASING AND S.S. INTER. CASING. UNIT IS FULLY INSULATED WITH 2" THICK 3# DENSITY FIBERGLASS INSULATION.
2.) ALL DECALS AND NAMEPLATES MUST BE IN
AIR
FLO
WR
ETU
RN
DH/FAN ACCESS PANEL
REACT. BURNER &
SECTION A-A
FILTER/MOTOR ACCESS
FILTER ACCESS
PIPING VESTIBULE/SUPPLYFAN ACCESS
LIFTING LUGS (4)
4.00
5.00
A A
CDH-126-2.0-DSOEELOR
CFM @ ESP 2000 @ 2.0 W.C.BHP / RPM 2.02 / 3500BLOWER MODEL 121 APF SWSI, CLS 2 100%MOTOR HP / RPM 3 / 3600MOTOR TYPE TEFCMOTOR FLA 3.1FILTER SIZE & QTY (3) 12" x 16" x 2"FILTER STYLE PERMANENT
CFM @ ESP 553 @ 0.5 W.C.BHP / RPM .87 / 3450BLOWER MODEL JRW 806N SWSI, CLS 1MOTOR HP / RPM 1-1/2 / 3450MOTOR TYPE OPDMOTOR FLA 1.75FUEL TYPE PROPANE/NATURALGAS PRESSURE 7" - 14" W.C.PIPING DIAGRAM NO. CDH-126-2.0 PIPINGFILTER SIZE & QTY (1) 12" x 16" x 2"FILTER STYLE PERMANENT
