Date post: | 02-Jun-2018 |
Category: |
Documents |
Upload: | tbmercator |
View: | 218 times |
Download: | 0 times |
of 22
8/10/2019 Di1611_Twain_UM_GB_1.1.0
1/22
___________________________________________________________________________
8/10/2019 Di1611_Twain_UM_GB_1.1.0
2/22
8/10/2019 Di1611_Twain_UM_GB_1.1.0
3/22
8/10/2019 Di1611_Twain_UM_GB_1.1.0
4/22
Contents
ii Di1611/Di2011 Twain Driver
8/10/2019 Di1611_Twain_UM_GB_1.1.0
5/22
Setting Up PC Scanning 1
Di1611/Di2011 Twain Driver 1-1
1 Setting Up PC Scanning
If the enclosed TWAIN Driver is installed on the computer, this copier canbe used for to scan documents to a PC.
The following software and hardware system environment is required for
PC scanning.
OS: Windows 98, Windows Me, Windows 2000, or Windows XP
TWAIN-compatible image-processing software (such as, Adobe Pho-
toshop)
USB V.1.1 (or later version)
8/10/2019 Di1611_Twain_UM_GB_1.1.0
6/22
1 Setting Up PC Scanning
1-2 Di1611/Di2011 Twain Driver
8/10/2019 Di1611_Twain_UM_GB_1.1.0
7/22
8/10/2019 Di1611_Twain_UM_GB_1.1.0
8/22
2 Connecting to the USB Port
2-2 Di1611/Di2011 Twain Driver
8/10/2019 Di1611_Twain_UM_GB_1.1.0
9/22
Installing the TWAIN Driver 3
Di1611/Di2011 Twain Driver 3-1
3 Installing the TWAIN Driver
This section describes the procedure for installing both of the TWAIN driv-er and GDI Diver. The TWAIN driver can be installed by using Plug and
Play.
3.1 Installing the TWAIN Driver Using Plug and Play
Installing the TWAIN Driver Using Plug and Play Under Windows XP
1 With Windows running, insert the CD-ROM into your computers CD-ROM drive.
2 Turn on the copier.
3 When the copier is ready, connect it to the computer with the USB cable.
The Found New Hardware Wizard dialog box appears.
4 Select Install from a list or specific location [Advanced], and thenclick [Next].
5 Select Include this location in the search:under Search for thebest driver in these locations., and then click [Browse].
6 Browse to Driver\(language)\WinXP on the CD-ROM, and then click[OK].
Tip
Select the language you prefer. For example, if you prefer English,
browse to:
Driver\English\WinXP
8/10/2019 Di1611_Twain_UM_GB_1.1.0
10/22
3 Installing the TWAIN Driver
3-2 Di1611/Di2011 Twain Driver
7 Click [Next].
8 The Completing the Found New Hardware Wizard dialog box ap-pears.
Click [Finish].
9 The Found New Hardware Wizard dialog box appears again.
Repeat steps 4 through 7.
Note
This completes the installation of the TWAIN driver.
8/10/2019 Di1611_Twain_UM_GB_1.1.0
11/22
Installing the TWAIN Driver 3
Di1611/Di2011 Twain Driver 3-3
Installing the TWAIN Driver Using Plug and Play Under Windows
2000
1 With Windows running, insert the CD-ROM into your computers CD-ROM drive.
2 Turn on the copier.
3 When the copier is ready, connect it to the computer with the USB ca-ble.
The Found New Hardware Wizard dialog box appears.
4 Select Search for a suitable driver for my device (recommended)in the Install Hardware Device Drivers dialog box, and then click
[Next].The Locate Driver Files dialog box appears.
5 Select Specify a location, and click [Next].
6 Click [Browse...] on the next dialog box, browse toDriver\(language)\Win2000 on the CD-ROM, and then click [OK].
Tip
Select the language you prefer. For example, if you prefer English,
browse to:
Driver\English\Win2000
7 Click [OK], and follow the instructions that appear on the screen untilthe Completing the Found New Hardware Wizard dialog box ap-
pears.
Click [Finish].
8 The Found New Hardware Wizard dialog box appears again.
Repeat steps 4 through 7.
Note
This completes the installation of the TWAIN driver.
8/10/2019 Di1611_Twain_UM_GB_1.1.0
12/22
3 Installing the TWAIN Driver
3-4 Di1611/Di2011 Twain Driver
Installing the TWAIN Driver Using Plug and Play Under Windows Me/
98
1 With Windows running, insert the CD-ROM into your computers CD-ROM drive.
2 Turn on the copier.
3 When the copier is ready, connect it to the computer with the USB ca-ble.
The Add New Hardware Wizard dialog box appears.
4 Click [Next], and then select Search for the best driver for your de-vice (Recommended)on the next dialog box.
Click [Next] again.
5 Select [Specify a location], and then click [Browse].
6 Browse to Driver\(language)\Win9x on the CD-ROM, and then click[OK].
Tip
Select the language you prefer. For example, if you prefer English,
browse to:
Driver\English\Win9x
7 Click [Next], and then follow the instructions that appear on the screenuntil you can click [Finish].
8 The Add New Hardware Wizard dialog box appears again.
Repeat steps 4 through 7.
Note
Repeat steps 4 through 7 until the installation is completely finished.
This completes the installation of the TWAIN driver.
8/10/2019 Di1611_Twain_UM_GB_1.1.0
13/22
How to Scan Document 4
Di1611/Di2011 Twain Driver 4-1
4 How to Scan Document
4.1 Using the Automatic Document Feeder
1 Select the PC software program (Imaging, Photoshop, etc.). This pro-cedure uses Microsoft Imaging as an example.
2 Click [File].
3 Click [Select Device...].
4 Choose Minolta Di**** from the dialog box, then click [OK].
Note
The name of the copier displayed will vary depending on the model
being used.
Minolta Di****
5 Click [Acquire Image...], then adjust any settings necessary.
See Common Settings on page 5-1.
6 Place the document face upon the Automatic Document
Feeder (AF-12) or Duplexing
Document Feeder (AFR-19).
Note
In order to scan double-
sided documents, the
Duplexing Document Feeder AFR-19 must be connected to the
machine. (Di2011 only)
7 Click [Scan] to begin scanning.
Model name of the copier
8/10/2019 Di1611_Twain_UM_GB_1.1.0
14/22
4 How to Scan Document
4-2 Di1611/Di2011 Twain Driver
4.2 Using the Original Glass
1 Select the PC software program (Imaging, Photoshop, etc.). This pro-cedure uses Microsoft Imaging as an example.
2 Click [File].
3 Click [Select Device...].
4 Choose Minolta Di**** from the dialog box, then click [OK].
Note
The name of the copier displayed will vary depending on the model
being used.
Minolta Di****
5 Click [Acquire Image...], then adjust any settings necessary.
See Common Settings on page 5-1.
6 Place the document facedown on the Original Glass.
Align the document with
the scale marks across
the top and to the left of
the Original Glass.
7 Click [Scan] to begin scan-ning.
Model name of the copier
8/10/2019 Di1611_Twain_UM_GB_1.1.0
15/22
Common Settings 5
Di1611/Di2011 Twain Driver 5-1
5 Common Settings
5.1 Auto Options
1
2
3
4
5
8
9
6
7
No. Items Settings
1 Paper Size A3L, B4L, A4L, B5L, A5L, FLS L, A4C, B5C, A5C, Ledger L,11x14L, Legal L, Letter L, Half Letter L, Letter C, Half Letter C,
8KL, 16KL, 16KCSeePaper Size: on page 5-2.
2 Scan Type B/W (default setting), PhotoSeeScan Type: on page 5-2.
3 Resolution 150dpi !150dpi, 300dpi !300dpi (default setting),600dpi !600dpiSeeResolution: on page 5-2.
4 Duplex Scanning OFF (default setting), ONSeeDuplex Scanning: on page 5-2.
5 Brightness -4 to 4
See Brightness: on page 5-2.
6 Help See the Help file.
7 About See version information.
8 Scan Scan an image.
9 Close Close scanner dialog.
8/10/2019 Di1611_Twain_UM_GB_1.1.0
16/22
5 Common Settings
5-2 Di1611/Di2011 Twain Driver
Paper Size:
Select the paper size from the pull-down list to match the size of document
to be scanned.
Scan Type:
The Scan Typepull-down list contain two options.
B/W: Suitable for most text documents.
Photo: Suitable for photographs.
Resolution:
The Resolutionpull-down list contain three options that can be used for
different purposes.
150dpi !150dpi: Normal resolution for text documents containing
standard sized text.
300dpi !300dpi: Higher resolution for text documents containing small
characters or fine print, such as a newspaper article. This is default
setting.
600dpi !600dpi: Highest resolution for scanning photographs and oth-
er images.
Duplex Scanning:
Select OFF or ON from the pull-down list.
Note
Duplex Scanning is not displayed and cannot be selected when the
Duplexing Document Feeder is not connected to the machine. (Di2011
only)
Brightness:
This function is used to adjust the brightness of colors. The default set-
tings is 0.
Brightness can be set from -4 to 4.
8/10/2019 Di1611_Twain_UM_GB_1.1.0
17/22
Error Message 6
Di1611/Di2011 Twain Driver 6-1
6 Error Message
6.1 Original Document JamMessage on the Control Panel:
Message on the PC screen:
Cause Remedy
A paper jam occurred in the AutomaticDocument Feeder or Duplexing DocumentFeeder.
All misfed paper was not removed from theAutomatic Document Feeder or DuplexingDocument Feeder.
Open the Document Feeder Cover andthe Automatic Document Feeder or Du-plexing Document Feeder, and then re-move the misfed paper.
The recovery procedure is the same asthat for To clear a misfeed in the Auto-matic Document Feeder on page 6-2.
After the paper jam has been cleared, thememory percentage will return to its orig-inal value.
8/10/2019 Di1611_Twain_UM_GB_1.1.0
18/22
6 Error Message
6-2 Di1611/Di2011 Twain Driver
To clear a misfeed in the Automatic Document Feeder
1 Remove the original docu-ment from the Document
Feed Tray.
2 Open the Document FeederCover and gently remove the
misfed paper.
3 Open the Automatic Docu-ment Feeder and gently re-
move the misfed paper.
4 Close the Document FeederCover, then load the docu-
ment removed in step 1 into
the Automatic Document
Feeder again.
8/10/2019 Di1611_Twain_UM_GB_1.1.0
19/22
Error Message 6
Di1611/Di2011 Twain Driver 6-3
Communication Error
Message on the PC screen:
Scanner Busy
Message on the PC screen:
Cause Remedy
The copier is not ready. PC or copier system crash during commu-
nication. USB cable does not connect properly dur-
ing communication.
1. Turn the copier OFF, then check if theUSB cable is connected properly or not.
2. After checking the USB cable carefully,turn the copier ON again.
3. If you still cannot fix the problem, callyour service representative.
Cause Remedy
If TWAIN scanning and copy jobs are beingperformed at the same the time, the copiermay stop in the middle of scanning.
Wait until Copy or all scanning is over.
8/10/2019 Di1611_Twain_UM_GB_1.1.0
20/22
6 Error Message
6-4 Di1611/Di2011 Twain Driver
Read Data Error
Message on the PC screen:
Cause Remedy
An error occurred while reading data fromthe copier while scanning.
1. Turn the copier OFF, then check if theUSB cable is connected properly or not.
2. After checking the USB cable carefully,turn the copier ON again.
3. If you still cannot fix the problem, callyour service representative.
8/10/2019 Di1611_Twain_UM_GB_1.1.0
21/22
Error Message 6
Di1611/Di2011 Twain Driver 6-5
Automatic Document Feeder No Paper
Message on the PC screen:
NoteIn order to scan double-sided documents, the Duplexing Document
Feeder AFR-19 must be connected to the machine. (Di2011 only)
Cause Remedy
There is no paper in the Automatic Docu-ment Feeder (Duplexing Document Feed-er) when duplex scanning is selected.
Add paper to the Automatic DocumentFeeder (Duplexing Document Feeder).
8/10/2019 Di1611_Twain_UM_GB_1.1.0
22/22
6 Error Message
Other Machine Error
Message on the PC screen:
Note
In order to scan double-sided documents, the Duplexing Document
Feeder AFR-19 must be connected to the machine. (Di2011 only)
Cause Remedy
The Automatic Document Feeder (Duplex-ing Document Feeder) cover or DocumentFeeder Cover was opend while a docu-ment was being scanned.
The recovery procedure, please refer toUsers Guide.
After the paper jam has been cleared, thememory percentage will return to its orig-inal value.
An transmission error occured between theTWAIN driver and the copier.
Check the copier and the USB cable.