CONSTRUCTION PRODUCTS INTRODUCTION
Clear and dynamic packaging
• The pack clearly indicates material groups for which it is most suitable
• The blade diameter is clearly displayed to avoid incorrect blade selection
• Do’s and Dont’s mentioned on each pack point out correct and appropriate usage of Clipper Diamond Blades
• The construction material for which the product can be used is prominently mentioned along the product pictogram, to reduce incorrect diamond blade selection
Conformity to Safety Regulations: EN13236
• NORTON is one of the first diamond tool manufacturers to comply with Safety and
Quality Control regulations laid by European Product Code - EN13236
• NORTON certifies that all their diamond products fully comply with the
requirements of EN13236
• NORTON strongly advises users not to use products that do not carry the marking
of EN13236
Wear a respirator Wear eye protection Read the instructions
Wear gloves Wear hearing protection Not to be used for side grinding
Safety : The Number 1 Priority for NORTON
Brand HierarchyFurniture & Decorative Industrial
Better
Best
Good
Do's
• Ensure that the product is suitable for its specific application
• Disconnect power before fitting diamond blade to the machine
• Examine all products before mounting and periodically for possible defects or damage (core flatness, fatigue cracks,
undercutting, arbor damage)
• Ensure correct mounting devices are used and that they are clean, undistorted and free from burrs
• Always use a correctly designed and adjusted guard (on the blade)
• Wear appropriate personal protective equipment at all times
• Ensure accordance between product direction arrow and machine rotation
Dont's
• Do not use a machine that is not in good working order or one with defective parts
• Do not force abrasive onto the mounting device or modify the size of the mounting blade
• Do not exceed the maximum operating speed marked on the product
• Do not apply shock or excessive force to the product or overheat it
• Do not use mounting flanges which are not clean and flat
• Do not tighten the mounting device excessively
• Do not start the machine until the guard is in place and fastened securely
• Do not grind materials for which the product is not designed
• Do not stop the abrasive applying pressure to its surface, let it stop by itself
• Do not exceed permissible rotation speeds, refer values mentioned on the product
Norton Diamond Blade - Important Usage Information
Diamond Blades are safe if used correctly.
Diamond Blades are dangerous, if abused.
PROFESSIONAL BLADES
Professional Blades - Value for Money Good value for money laser-welded blade, for wet or dry cutting. Versatile product designed for petrol handheld saws, floor saws and masonry saws.
Product Type Application Size BrandCode Dia Bore Height
CPK14G Segmented Marble / Granite 350 50 10 Stone Cut CP2614 Segmented Concrete / Asphalt 350 50 10 Concrete Super CP2616 Segmented Concrete / Asphalt 400 50 10 Concrete Super CP2618 Segmented Concrete / Asphalt 450 50 10 Concrete Super CP2620 Segmented Concrete / Asphalt 500 50 10 Concrete Super CP2212 Continuous Rim Tiles and Marbles 300 60 10 Stone Cut
CP1260 Continuous Rim Tiles and Marbles 300 50 10 Stone Cut
CPVC35 Segmented Mild Steel / Concrete 350 25.4 10 Multirunner
CPLW35 Segmented Concrete / Asphalt 350 50 10 Clipper Premium
CPLW40 egmented Concrete / Asphalt 400 50 10 Clipper Premium
DIAMOND SAW BLADES
Segmented Blade has number of gullets which help in dirt removal and smooth cutting of the material. The segments are made up of optimum bond matrix which hold the diamonds and provide a faster cut rate and a longer blade life.
Continuous Rim Blade is used to produce chip-free, clean cuts on a variety of hard, ceramic materials. The high quality diamond provides for a faster cut-rate and a longer blade life
Continuous Rim Blade
Segmented Blade
Product Application Seg. BrandCode Dia Bore Height
CPVC1 Mild steel / Granite 105 30 3 Clipper Multirunner
CP2741 Marble / Granite 110 20 9 Clipper
CP1149 Marble / Granite 110 20 9 Clipper
CP49I Marble / Granite 110 20 8.5 Atlas
CPB109 Marble / Granite 110 20 9 Bear Premium
CPC109 Marble / Granite 110 20 9 Champ
CP1145 Marble / Granite 110 20 10 Samrat
CP41S Sandstone / Granite 110 20 10 Clipper
CPJ114 Marble / Granite 110 20 9 Clipper Premium
CP2751 Marble / Granite 125 20/22.23 9 Clipper
CP1250 Marble / Granite 125 20/22.23 9 Samrat
CPJ115 Marble / Granite 125 20/22.23 10 Clipper Premium
CP7910 Marble / Granite 150 20/22.23 9 Champ
CP1810 Marble / Granite 180 20/22.23 10 Samrat
CPJ814 Marble / Granite 200 20/22.23 8 Clipper Premium
CP2310 Marble / Granite 230 20/22.23 9 Champ
Product Application Seg. BrandCode Dia Bore Height
CP105C Tiles / Marbles / Granite 105 20 5 Stone Cut
CPB209 Tiles / Marbles / Granite 110 20 9 Bear Premium
CPC209 Tiles / Marbles / Granite 110 20 9 Champ
CPZ117 Tiles / Marbles / Granite 110 20 7 Clipper
CP2742 Tiles / Marbles / Granite 110 20 9 Clipper
CP2752 Marble / Granite / Concrete 120 22.23 9 Clipper
DIAMOND SAW BLADES
Diamond Cup Wheels are mainly used for buffing, beveling,smoothing and sculpturing stones.
Turbo Blade combines the advantages of both Continuous Rim and Segmented Rim blade in cutting of bricks, blocks, tiles, concrete and masonry materials. Designed for fast cutting with less chipping, better cooling and excellent dust removal.
Tuck Point Blades are used for making grooves on the surface of the construction materials and repairing grout, cleaning and routing cement mortar joints. Thicker segments provide a faster cut-rate and longer blade life.
Available in 8” diameter Diamond Segmented Blades in 5.5 mm segment thickness.
Cup Wheels
Tuck Points
Turbo and Thin Turbo Blades
Turbo Blades
Product Code Dia Bore Seg. Height Type Brand
CPX8c 80 20 10 Turbo Clipper
CPX8s 80 20 10 Segmented Clipper
CPX10c 100 20 10 Turbo Clipper
CPX10s 100 20 10 Segmented Clipper
CPVC4 100 20 - Vaccum Clipper Brazed Multirunner
Product Code Dia Bore Thickness Seg. Height Brand
CP2105 210 22.23 5.5 8 Clipper Samrat
Product Code Application Dia Bore Seg, Brand height
CP2743 Marble / Granite 110 20 9 Clipper
CPB409 Marble / Granite 110 20 9 Bear Premium
CPC409 Marble / Granite 110 20 9 Champ
CP2249 Marble/Granite 110 20 9 Clipper
Thin Turbo Blades
CPM117 Tiles / Marble 110 20 8 Clipper(With Flange)
CP117T Marble and Granite 110 20 9 Samrat
Concrete BladesCPC114 Concrete/Brick 110 20 8.5 Clipper
TCT Circular Saw Blade for wood cutting is a specially designed multipurpose diamond blade ideal for rip and crosscut application suitable for both hardwood and softwood.
Its directional cut does not allow the wood dust and heat to accumulate, thereby giving a smooth and comfortable cut. Their sharp and tall teeth arrangement helps in fast, smooth and comfortable cutting for all wood cutting applications.
WOOD CUTTER BLADES
Product Code Dia Bore No of Teeth Brand
CP416 110 20 16 Clipper
CP430 110 20 30 Clipper
CP440 110 20 40 Clipper
CP440J 110 20 40 Clipper
CP524 125 22.23/20 24 Clipper
CP530 125 22.23/20 30 Clipper
CP540S 125 22.23/20 40 Clipper
CP540J 125 22.23/20 40 Clipper
CP43B+ 110 20 30 Bear +
CP44B+ 110 20 40 Bear +
CP53B+ 125 22.23/20 30 Bear +
CP54B+ 125 22.23/20 40 Bear +
CP43C 110 20 30 Champ
CP44C 110 20 40 Champ
CP53C 125 22.23/20 30 Champ
CP54C 125 22.23/20 40 Champ
CP430L 110 20 30 Lion
CP440L 110 20 40 Lion
CP530L 125 20 30 Lion
CP540L 125 20 40 Lion
Product Code Dia Bore No of Teeth Brand
CP440X 110 20 40 Xpert
CP540X 125 20 40 Xpert
CP740 180 22.23/25.4 40 Clipper
CP760 180 22.23/25.4 60 Clipper
CP1840 180 22.23/25.4 40 Clipper
CP2040 200 22.23/25.4 40 Clipper
CP2060 200 22.23 / 25.4 60 Clipper
CP2540 250 22.23 / 25.4 40 Clipper
CP2560 250 22.23 / 25.4 60 Clipper
CP3040 300 25.4 / 30 40 Clipper
CP3060 300 25.4 / 30 60 Clipper
CP3540 350 25.4 / 30 40 Clipper
Product Code Dia Bore No of Teeth Brand
CP2510 250 22.23 / 25.4 100 Clipper
CP2512 250 22.23 / 25.4 120 Clipper
CP3010 300 22.23 / 25.4 100 Clipper
CP3012 300 22.23 / 25.4 120 Clipper
CP3510 350 25.4 / 30 100 Clipper
CP3512 350 25.4 / 30 120 Clipper
Aluminum & Wood Cutting
PREMIUM WOOD CUTTER BLADES
CP440P Woodcutting 110 20 40 Clipper Premium
CP540P Woodcutting 125 20 50 Clipper Premium
Product code Type Dia Bore Thickness Brand
DIAMOND POLISHING PADS
Polishing Pads are suitable for polishing corner angle and the inside and outside arc of the stone surface. These are used for high gloss finish on all the stones and are available in various mesh/ grit sizes.
Diamond Polishing Pads are made available in Grits 5000, 8000 & 12000.
Product code Type Dia Bore Thickness Available Grits Brand
CPM Flexible 100 20 2.5 50, 100, 200, 400, 600, 800, Clipper 1000, 1200, 1500, 2000, 3000
CPF Flexible 100 20 5 50, 100, 200, 400, 600, 800, Bear 1000, 1200, 1500, 2000, 3000
CPE Flexible 100 20 2.5 50, 100, 200, 400, 600, 800, Atlas 1000, 1200, 1500, 2000, 3000
CPB Backedup 100 16 2.5 50, 100, 200, 400, 800, 1500, 3000 Bear
CPMB Backedup 100 16 2.5 50, 100, 200, 400, 600, 800, Clipper 1000, 1200, 1500, 2000, 3000
GLASS CUTTING BLADE
Electroplated Glass Blade is designed to give fast, clean & chip-free cutting of glass and tiles with the smoothest edge available. This blade is used for cutting hard and ceramic tiles.
Product Code Type Application Dia Size Bore Kerf Brand
CPG100 Glass Cutter Tiles and Glass 100 20 1 Clipper
Vacuum Brazed Core Bit
Vacuum brazed Core Drill Bits are used for drilling holes for water pipe, gas nozzle, Staircase railing and fixtures. Best for both Wet and Dry applications.
Availability
• Product Code : CPK – 6, 8, 10, 12, 14, 16, 20, 25, 32, 37, 40, 44, 50 mm Dia. with a length of 70 mm
Diamond Core Drill Bits are used for drilling holes for air-conditioned, water pipe, gas nozzle on the wall and floor. Norton Diamond Core Bits are designed for fast drilling and maximum life with no damage to the wall.
Availability
• Product Code : CPK – 6, 8, 10, 12, 14, 16, 20, 25, 32, 37, 40, 44, 50 mm Dia. with a length of 90 mm
• Product Code : CPJ – 51, 76, 102, 127, 152 and 200 mm Dia. with a length of 450 mm
Segments
• CPCS1 - 51 & 76MM
• CPCS1 - 102 & 127MM
• CPCS3 - 152MM
• CPCS4 - 200 MM
DIAMOND CORE DRILL BITS
CP512
Applications• Ceramic / Vitrified tile cutting• Slitting tiles in required size• Squaring of tiles
Dimensions /Weight
Length 500MM
Width 400MM
Height 230MM
Petrol
C51 230V
Applications• Ceramic tiles cutting & Squaring• Granite & marble cutting
Dimensions /Weight
Length 930MM
Width 470MM
Height 1200 MM
Table Size 810 X 470MM
Weight 35Kg
TR201E 900W
Electric Motor 230 V
Characteristics
Max blade Dia 200 Mm
Blade Shaft Dia 25.4Mm
Tilting Head 0˚ to 45˚
Max Cutting Depth 90˚ / 45˚ 35MM / 25MM
Max Cutting Length 650MM
RPM 2950
Feature Benefits
900 W Motor Powerful Induction Motor
650MM cutting length Ideal for long tiles & Diagonal cut of 40X40 tiles
Folding legs & transport Wheels Easy transportation & Storage
Tilting Head Perfect for miter cut of 00 to 450
Robust Rail to drive the cutting Head Rigidity and accurate cutting
Robust Metal Frame Rigidity and protection of the removable plastic tray
Characteristics
Max blade Dia 200 Mm
Blade Shaft Dia 25.4Mm
Tilting Head 0˚ to 45˚
Max Cutting Depth 90˚/ 45˚ 35MM / 25MM
RPM 2950
Feature Benefits
900 W Motor Powerful Induction Motor
Tilting table 0 to 45 Easy Cleaning
TT200 EM
TR201E
CM 401
C51
Characteristics
Max blade Dia 400 MM
Blade Shaft Dia 25.4MM
Tilting Head 0˚
Max Cutting Depth 90˚ 150MM
Max Cutting Length 650MM
RPM 2700
Electric Petrol
CM401 230V / 2.2 Kw (3HP) 4.8 Kw (6.5HP)
Dimensions /Weight
1380 600MM 600MM
Width 660MM 660MM
Height 1510 MM 1510 MM
Table Size 500 X 600MM 500 X 600MM
Weight 113Kg 118Kg
Characteristics
Max blade Dia 350 MM
Blade Shaft Dia 25.4MM
Water Tank Capacity 20 L
Sound Power 100dB
Max Cutting Length 125MM
RPM 2800
Petrol
C51 4.8 Kw (6.5HP)
Dimensions /Weight
Length 780MM
Width 460MM
Height 890MM
Weight 76Kg
Feature Benefits
900 W Motor Powerful Induction Motor
500MM or 600MM cutting length perfect for large Material
Removable Aluminum water tray Easy Cleaning
Built with extruded aluminum profile Extreme rigidity and long life
Applications• Masonry saw for concrete block cutting• Brick Cutting
Applications• Floor saw for concrete asphaltand floor cutting
Feature Benefits
Cutting Depth adjustable with crank Quick and easy setting
Adjustable Handles height Ergonomic user’s working position
Compact design Easy storage and transportation
Large diameter reat wheel coated Robustness and stability with hard rubber
Petrol
CP512 4.0 Kw (5.4 HP)
Dimensions /Weight
1380 430MM
Width 267MM
Height 750 MM
Weight 10.2Kg
Characteristics
Max blade Dia 1000 MM
Blade Shaft Dia 60MM
Tilting Head 0˚
Max Cutting Depth 90˚ 100MM
RPM 4450
Feature Benefits
Portability Easy to carry
Petrol Mix Separate Tanks and automatic mixing
Applications• Portable hand saw for masonry applications
C51
CP512
Announcing the launch of our new India website www.nortonabrasives.com/en-in,
marking a new day in the online world of Norton Abrasives!
The new Norton site delivers a deeper brand experience by giving users detailed access to
products, markets, machines and surfaces. It gives more focus on product selection and key
sub-brands, with a cleaner layout and dynamic lifestyle photography, and thanks to a more intuitive
navigation and responsive design, the new site is easier to navigate on any mobile device.