Diapositiva 1 - CinemaNext...Title: Diapositiva 1 Author: XLizartzategi Created Date: 1/21/2016...

STANDARD Series

SF Bio Filmstaden Vällingby, Vällingby, Sweden

5039 Top Premier Tip-Up

A modular seat, that consists of fully interchangeable elements, and which has been designed for cinemas. The seat and backrest are each composed of a block of moulded polyurethane foam with an internal metal structure. The upholstery is joined to the foam using the Integral Form system, without seams or stitching. A TS System fire barrier can be incorporated between the foam and the upholstery in both the seat and backrest, preventing fire from reaching the foam and delaying the spreading of flames and emission of toxic gases. The backrest padding has an anatomical shape and incorporates vertical and horizontal grooves. The seat padding is anatomically shaped and smooth without any channels or grooves, in order to avoid dirt accumulation. The seat and backrest are protected by fully washable polypropylene shells that protect the rear of the upholstery. The seat tips up automatically due to an extremely quiet double spring system inside the seat shell (tested to 500,000 cycles) that requires no lubrication of any kind.

Generously sized chair for luxury cinemas

Each chair is mounted on two metal pedestals incorporating a ball-and-socket joint system - including a locking mechanism - into which the seat pin fits. This enables easy seat replacement without having to dismantle the seat. The pedestals are made of steel tubing, and finished in black or grey epoxy paint. They are fixed to the floor by means of expansion plugs. The chair adapts to the specific slope of the floor at its base. Rows are formed by interconnected backrests and this provides totally rigid and stable rows, reinforcing the anchorage to the floor. The armrests are made of semi-rigid polyurethane foam, with an inner metal structure. They incorporate a single, compact built-in cup holder. The end of row seats are upholstered. The seat has rear perforations which allow adequate acoustic absorption when the seat is tipped up and out of use. The backrest can have a decorative rear upholstered section. The seat can be fully upholstered without losing acoustic properties. The backrest can incorporate a headrest, with padding made in Integral Form and a protective shell. The backrest can also have an upholstered section at the top.

FUNCTIONAL SPECIFICATIONS


Upholstery:

Fire standards: Spain: UNE-EN 1021 Parts 1 and 2

France: NF D 60-013 Italy: UNI 9175 Class 1.IM

Germany: DIN 66084

Paint:

Electrostatic polyester powder Coat thickness: 70-80 microns

Grid adherence: 100%

Structure:

Polyurethane Foam:

Seat density: 60-65 kg/m3 Backrest density: 50-55 kg/m3

Steel tube and plate. Arc welding with continuous wire feed.

Finished product:

UNE-EN 12727 Level 4 (heavy use) BS 5852. Clause 12. Ignition Sources 0, 1 and 5

USA: CAL T.B. 133 (with approved fabric)

Polypropylene:

Material: Copolymer Polypropylene IF-727 Traction resistance (ISO 527-2): 26 MPa

Elasticity modulus: (ISO 527-2): 1250 MPa

TECHNICAL SPECIFICATIONS


Cinema Sociale , Brescia , Italy

5046 Top Club

A modular seat, that consists of fully interchangeable elements. It has a fixed seat, which is always in the open position, and wide armrests, and is especially designed for cinemas requiring a high degree of user comfort. The seat and backrest are each composed of a block of moulded polyurethane foam with an internal metal structure. The upholstery is joined to the foam using the Integral Form system, without seams or stitching. The Integral Form system guarantees accurate replacements if required. A TS System fire barrier can be incorporated between the foam and the upholstery in both the seat and backrest, preventing fire from reaching the foam and delaying the spreading of flames and emission of toxic gases.

Generously sized chair for luxury cinemas

The backrest padding has an anatomical shape and incorporates vertical and horizontal grooves. The seat padding is anatomically shaped and smooth without any channels or grooves, in order to avoid dirt accumulation. The seat and backrest are protected by fully washable polypropylene shells that protect the rear of the upholstery. Each chair is mounted on a central pedestal joined to an internal bridge interconnecting the different seats and allowing fully rigid and stable rows. The end of each row is upholstered. The seats are fixed to the floor by means of expansion plugs. The seat adapts to the specific slope of the floor at its base. The armrests are of double width in order to comfortably accommodate the arms of two occupants at the same time. They have an inner metallic structure covered with semi rigid polyurethane foam. Optionally, they can incorporate a cup holder with the same structural characteristics as the armrest and which is perfectly integrated in it forming a single piece. Optionally, the backrest can incorporate a headrest, with padding made in Integral Form and a protective shell. As an additional option, the backrest can incorporate a rear upholstered section at the top.


5046 Top Club

Upholstery:

Fire standards: Spain: UNE-EN 1021 Parts 1

and 2 France: NF D 60-013

Italy: UNI 9175 Class 1.IM Germany: DIN 66084

Paint:



Structure:

Polyurethane Foam:



Finished product:



Polypropylene:




5046 Top Club

Cines Warner La Maquinista, Barcelona , Spain

5109 Tango Club

A seat designed for use in theatres, conference rooms and auditoriums. It has a special folding system providing great comfort and ease of movement between rows. It is a beam-mounted foldaway seat. The seat, backrest and armrest tip up automatically in one single movement. When the seat and backrest fold, the armrest rotates, adopting an upright position so that it does not exceed a width of 20cm. The movement sequence described occurs automatically whenever the seat is vacated. The seat, backrest and armrest assembly is supported by painted cast aluminum side frames. The seat and backrest pivot on maintenance-free polyamide bearings. The side frames supporting the seat and backrest are joined to a rectangular steel tube structure. The armrests are made of solid varnished beech wood. The lower part of the structure is attached to the pedestal, which is constructed of steel tubing and connected to a circular steel plate attached to the floor using metal expansion plugs. The structures are available in 2, 3 and 4 seat modules and are painted. Curved rows may be formed by joining the modules each at a slight angle from the last. The folding mechanism relies on gravity achieving high durability and minimum maintenance. At the bottom, the sides are fastened to the tubular pedestal structure. The seat is made up of a compact block of open-cell polyurethane foam, which is completely upholstered and can be easily changed. This block is attached to a 13mm varnished beech plywood board that protects the back part. The minimum seat thickness is 11cm. The backrest has the same characteristics as the seat and its minimum thickness is 9 cm.

Ergonomic fixed cinema seat

A TS System fire barrier can be incorporated between the foam and the upholstery in both the seat and backrest, preventing fire from reaching the foam and delaying the spreading of flames and emission of toxic gases. Also, the varnish on all wooden pieces can incorporate afire resistant treatment. A Helmoltz-type resonator can be incorporated to improve the acoustic absorption capacity of the seat. Together with table F-45 or table F-1000, it becomes an optimal solution for long work sessions and conferences.


5109 Tango Club

Upholstery:



Germany: DIN 66084

Paint:


Cross-cut adhesion test UNE-EN ISO 2409: 100%

Structure:

Polyurethane Foam:



Finished product:



Polypropylene:




5109 Tango Club

Sica - Kérisnel, Kérisnel, Saint-Pol-de-Léon, France

5136 Tango Tip-Up

A modular seat, consisting of fully interchangeable elements. The seat and backrest consist of two blocks of moulded polyurethane foam which have an internal metal structure. The upholstery is fully integrated in the foam by means of the Integral Form system, without seams or stitching. This system guarantees accurate replacements if they are needed. A TS System fire barrier can be incorporated between the foam and the upholstery in both the seat and backrest, preventing fire from reaching the foam and delaying the spreading of flames and emission of toxic gases.

The backrest padding is anatomically contoured with lumbar support and a headrest incorporating vertical and horizontal fluting in the headrest. The seat padding is also anatomically shaped, but is completely plain, without any channels or fluting, to keep out the dirt. Both the seat and backrest are protected by fully washable material covers, protecting the rear upholstery.

Cinema chairs with automatic folding seat

The seat is mounted on two metal pedestals incorporating a ball-and-socket joint system - including a locking mechanism - into which the seat pin fits. This enables the seat to be easily replaced without dismantling the whole structure. The pedestals are made of a tubular steel structure finished in powder paint. The seat is fixed to the floor by means of expansion plugs, and adapts to the specific slope of the hall at its base. Rows are formed by interconnected backrests allowing fully rigid and stable row formation, reinforcing the attachment to the floor. The armrests are made of polyurethane foam with an internal metal structure. The ends of the row are upholstered. The seat has rear perforations which provide adequate acoustic absorption when the seat is tipped up and out of use. The top rear part of the backrest can incorporate an upholstered headrest extension. Both the seat and backrest can be fully upholstered, without losing any acoustic properties. The seat tips up automatically due to an extremely quiet double spring system inside the seat shell (tested to 500,000 cycles) that requires no lubrication of any kind.


5136 Tango Tip-Up

Upholstery:



Germany: DIN 66084

Paint:



Structure:

Polyurethane Foam:



Finished product:



Polypropylene:




5136 Tango Tip-Up

The Convention Centre Dublin (CCD) Dublin, Ireland

9036 Megaseat

A spacious modular chair with fully interchangeable components. The seat and backrest are each composed of a block of moulded polyurethane foam with an internal metal structure. The upholstery is joined to the foam using the Integral Form system, without seams or stitching. The Integral Form system guarantees accuracy if a replacement is required. A TS System fire curtain can be incorporated between the foam and upholstery on both the seat and the backrest in order to prevent fire from reaching the foam and delay the spreading of flames and emission of toxic gases. The backrest padding is anatomically contoured, incorporating vertical and horizontal grooves. The seat padding has a smooth anatomical form and is free of grooves of any type in order to prevent the accumulation of dirt. The seat tips up automatically owing to an extremely quiet double spring system inside the seat shell (tested to 500,000 cycles) requiring no lubrication of any kind.

Cinema seat with excellent acoustic performance

The backrest and seat are protected by polypropylene shells which are completely washable and protect the rear part of the upholstery. Each chair is mounted on two metal pedestals that incorporate a system for housing a ball and socket joint (with locking mechanism) that is connected to the axis of the seat and allows the seat to be changed easily without disassembling it.

The pedestals are made of tubular steel finished in black or grey polyester paint. The chairs are fixed to the floor surface using expansion plugs. The seat adapts to the specific slope of the room through the base of the pedestal. Rows are formed by means of interconnected backrests ensuring rigid and stable row formation, reinforcing the attachment to the floor. The chair arms are made of semi-rigid polyurethane foam with an internal metal structure. They are compact in form and consist of a single piece with a built-in cup holder. Optionally, the upper rear face of the backrest can incorporate an upholstered section and the seat can be fully upholstered. The backrest can also be made with HR. This type of backrest features a headrest that is integrated into the backrest. In other words, it is not an add-on, but is actually an integral part of the backrest. This headrest system has a clear ergonomic advantage, as it is a natural extension of the backrest, not a separate item that is added on to it


9036 Megaseat

Upholstery:

Fire standards: Spain: UNE-EN 1021 Parts 1

and 2 France: NF D 60-013

Italy: UNI 9175 Class 1.IM Germany: DIN 66084

Paint:

Electrostatic polyester powder

Coat thickness: 70-80 microns


Structure:

Polyurethane Foam:



Finished product:



Polypropylene:




9036 Megaseat

Grand Megaplex Cinemas, The Gardens, Dubai, United Arab Emirates

9078 Megaseat

A spacious modular chair with fully interchangeable components. The minimum nominal distance between axes is 58cm. This distance is achieved not by using wider arms or extensions between units, but rather by increasing the dimensions of the seat and backrest. As a result, the actual width of the backrest is 56cm, a size that ensures a high level of comfort. The seat and backrest are composed of two blocks of moulded polyurethane foam that incorporate an internal metal structure. The upholstery is joined to the foam using the Integral Form system, without seams or stitching. The Integral Form system guarantees accurate replacements if they are needed. A TS System fire barrier can be incorporated between the foam and upholstery on both the seat and the backrest in order to prevent fire from reaching the foam, and to delay the emission of toxic gases and the spreading of flames. The backrest padding is anatomically contoured, incorporating vertical and horizontal grooves.

The seat padding has a smooth anatomical form and is free of grooves of any type in order to prevent the accumulation of dirt. The seat and backrest are protected by fully washable polypropylene shells which protect the rear upholstery. Each chair is mounted on a central pedestal and supported by an internal bridge connecting the different seats and ensuring rigid and stable rows. The pedestals are made of tubular steel finished in polyester paint. The chairs are fixed to the floor surface using expansion plugs. The seat adapts to the specific slope of the room through the base of the pedestal. Rows are formed by means of interconnected backrests ensuring rigid and stable row formation, reinforcing the attachment to the floor. The arms are made of semi-rigid polyurethane foam with an internal metal structure. They are compact in form and consist of a single piece with a built-in cupholder. Optionally, the upper rear face of the backrest can incorporate an upholstered section and the seat can be fully upholstered. The backrest can also be made with HR. This type of backrest features a headrest that is integrated into the backrest. In other words, it is not an add-on, but is actually an integral part of the backrest. This headrest system has a clear ergonomic advantage, as it is a natural extension of the backrest, not a separate item that is added on to it.

Modular, generously-sized chair for VIP cinemas


9078 Megaseat

Upholstery:



Germany: DIN 66084

Paint:

Electrostatic powder paint Coat thickness: 70-80 microns


Structure:

Polyurethane Foam:



Finished product:



Polypropylene:




9078 Megaseat

Cinema City Santa Coloma, Barcelona, Spain

9106 Megaseat

The seat and backrest are composed of two blocks of moulded polyurethane foam that incorporate an internal metal structure. The upholstery is joined to the foam using the Integral Form system, without seams or stitching. The Integral Form system guarantees accurate replacements if they are needed.

A TS System fire barrier can be incorporated between the foam and upholstery on both the seat and the backrest in order to prevent fire from reaching the foam, and to delay the emission of toxic gases and the spreading of flames. The backrest padding is anatomically contoured, incorporating vertical and horizontal grooves. The seat padding has a smooth anatomical form and is free of grooves of any type in order to prevent the accumulation of dirt. The seat and backrest are protected by fully washable polypropylene shells which protect the rear upholstery. The seat folds automatically thanks to a dual spring system inserted in the shell of the seat (tested at 500,000 cycles), which does not require any kind of lubrication and is extremely quiet. Each chair is mounted on a central pedestal and supported by an internal bridge connecting the different seats and ensuring rigid and stable rows. The pedestals are made of tubular steel and finished in black or grey polyester paint. The chairs are fixed to the floor surface using expansion plugs. The seat adapts to the specific slope of the room through the base of the pedestal. Rows are formed by means of interconnected backrests ensuring rigid and stable row formation, reinforcing the attachment to the floor. The backrest can also be made with HR. This type of backrest features a headrest that is integrated into the backrest. In other words, it is not an add-on, but is actually an integral part of the backrest. This headrest system has a clear ergonomic advantage, as it is a natural extension of the backrest, not a separate item that is added on to it.

Amply-sized automatically folding chair


9106 Megaseat

A generously-sized modular seat consisting of completely interchangeable elements. The minimum nominal distance between axes is 58cm. This distance is achieved not by using wider arms or extensions between units, but rather by increasing the dimensions of the seat and backrest. As a result, the actual width of the backrest is 56cm, a size that ensures a high level of comfort.

Upholstery:



Germany: DIN 66084

Paint:



Structure:

Polyurethane Foam:



Finished product:



Polypropylene:




9106 Megaseat

Warner Village Cinemas, Vimercate, Italy

9112 Megaseat

The seat is fixed and always open. The minimum distance between axes is 58cm. This distance is achieved not by using wider arms or extensions between units, but rather by increasing the dimensions of the seat and backrest. As a result, the actual width of the backrest is 56cm, a size that ensures a high level of comfort.

A TS System fire barrier is incorporated between the foam and upholstery on both the seat and the backrest in order to prevent fire from reaching the foam and to delay the emission of toxic gases and the spreading of flames.

The backrest padding is ergonomically contoured with support for the back and head. It incorporates vertical and horizontal grooves at the top of the backrest. The seat padding is ergonomic and smooth, without any type of groove in order to prevent dirt accumulation. The seat and backrest are protected by materials which are fully washable to protect the rear upholstery.

The seat is mounted on a central pedestal and supported by an internal union bridge connecting the different seats and ensuring completely rigid and stable rows. The pedestal is made of tubular steel and finished in black or grey polyester paint.

The chairs are fixed to the floor surface using expansion plugs. The seat adapts to the specific slope of the room through the base of the pedestal. Rows are formed by means of interconnected backrests ensuring rigid and stable row formation, reinforcing the attachment to the floor.

The arms are made of semi-rigid polyurethane foam with an internal metal structure. They are compact in form and consist of a single piece with a built-in cupholder. Optionally, the upper rear face of the backrest can incorporate an upholstered section and the seat can be fully upholstered.

The backrest can also be made with HR. This type of backrest features a headrest that is integrated into the backrest. In other words, it is not an add-on, but is actually an integral part of the backrest. This headrest system has a clear ergonomic advantage, as it is a natural extension of the backrest, not a separate item that is added on to it. The seat and backrest are composed of two blocks of moulded polyurethane foam that incorporate an internal metal structure. The upholstery is joined to the foam using the INTEGRAL FORM system, without seams or stitching.

Individual, high comfort chair


9112 Megaseat

A highly comfortable individual seat of generous dimensions, designed for use in upscale VIP lounges, cinemas or home theatre rooms.

Upholstery:



Germany: DIN 66084

Paint:



Structure:

Polyurethane Foam:



Finished product:



Polypropylene:




9112 Megaseat

CineBox Plenilunio, Madrid , Spain

9113 Megaseat

A generously sized modular seat consisting of completely interchangeable elements. The minimum distance between axes is 58cm. This distance is achieved not by using wider arms or extensions between units, but rather by increasing the dimensions of the seat and backrest. As a result, the actual width of the backrest is 56cm, a size that ensures a high level of comfort. The seat and backrest are composed of two blocks of moulded polyurethane foam that incorporate an internal metal structure. The upholstery is joined to the foam using the INTEGRAL FORM system, without seams or stitching. The Integral Form system ensures replacement accuracy if required. A TS System fire barrier can be incorporated between the foam and upholstery on both the seat and the backrest in order to prevent fire from reaching the foam, and to delay the emission of toxic gases and the spreading of flames.

The backrest padding is anatomically contoured incorporating vertical and horizontal grooves to improve comfort. The seat padding has a smooth anatomical form and is free of grooves of any type in order to prevent the accumulation of dirt. Both the seat and backrest have rear polypropylene shells which are fully washable, thereby preventing scratches and dirt appearing on the rear upholstery. The seat is fixed. Each chair is mounted on a central pedestal and supported by an internal bridge connecting the different seats and ensuring rigid and stable rows. The pedestals are made of tubular steel and finished in black or grey polyester paint. The chairs are fixed to the floor surface using expansion plugs. The seat adapts to the specific slope of the room through the base of the pedestal. Rows are formed by means of interconnected backrests ensuring rigid and stable row formation, reinforcing the attachment to the floor. The seat arms are made of semi-rigid polyurethane foam with an internal metal structure. They are compact in form and consist of a single piece with a built-in cup holder. Optionally, the upper part of the rear panel can have an upholstered section, and the seat can also be completely upholstered. The backrest can also be made with HR. This type of backrest features a headrest that is integrated into the backrest. In other words, it is not an add-on, but is actually an integral part of the backrest. This headrest system has a clear ergonomic advantage, as it is a natural extension of the backrest, not a separate item that is added on to it.

Individual, fixed seat, highly comfortable chair


9113 Megaseat

Upholstery:



Germany: DIN 66084

Paint:



Structure:

Polyurethane Foam:



Finished product:



Polypropylene:




9113 Megaseat

Date post:	20-Sep-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Diapositiva 1 - CinemaNext...Title: Diapositiva 1 Author: XLizartzategi Created Date: 1/21/2016...

Documents