North American HeadquartersQuaker Chemical CorporationOne Quaker Park901 E. Hector StreetConshohocken, PA 19428-2380U.S.A.+1.610.832.4000
European HeadquartersQuaker Chemical B.V.Industrieweg 71422 AH UithoornThe Netherlands+31.297.544644
Asia/Pacific HeadquartersQuaker Chemical (China) Co., Ltd.No. 619 TianYing RoadQingpu Industrial ParkShanghai 201700People’s Republic of China+86.21.3920.1666
South American HeadquartersQuaker Chemical Indústria é Comércio Ltda.Avenida Brasil, no 44.178Distrito Industrial de Campo Grande23.078-000 - Rio de Janeiro - RJBrazil+55.21.3305.1800
DiE sLiCK® 1750A High performance semi-syntheticFormulated as a concentrate designed for excellent release and bright cosmetic casting finish. DiE sLiCK® 1750A is a semisynthetic petroleum formulation blended specifically to meet customer’s production environment and incorporating state of the art smart Polymer™ technology.
DiE sLiCK® 1850A Extreme performance Formulated as a concentrate designed for excellent release and bright cosmetic casting finish in extreme casting environments. DiE sLiCK®1850A is a complete synthetic formulation incorporating state of the art smart Polymer™ technology.
DiE sLiCK® 1950A syntheticFormulated as a wax free concentrate designed for excellent release and bright cosmetic casting finish and will not clog spray heads or create overspray residue. DiE sLiCK®1950A is a semi-synthetic ester formulation incorporating state of the art smart Polymer™ technology.
DiE sLiCK® 2050A High performance semi synthetic ester wax freeFormulated as a concentrate designed for excellent release and bright cosmetic casting finish. DiE sLiCK®2050A is a semisynthetic wax free formulation blended specifically to meet customer’s production environment and incorporating state of the art smart Polymer™ technology.
DiE sLiCK® 1650A High performance semi synthetic petroleum wax free Performs on large and small castings for all siloxane free applications
DiE sLiCK® 1550A siloxane free semi synthetic Performs on large and small castings for all siloxane free applications
PlungeR lubRicants
POLYsLiCK® 31 solid graphite free 1-1.5mm uniform white wax beads Graphite free wax solid plunger for a lubricant variety of tip sizes and types
POLYsLiCK® 100 solid graphite free 1.5-2.0mm uniform off white wax beads Graphite free wax solid plunger for a lubricant variety of tip sizes and types
POLYsLiCK® 76P solid wax and graphite 1-1.5mm uniform black beads Wax and graphite solid plunger for a lubricant variety of tip sizes and types
POLYsLiCK® 87B solid wax and graphite 1.5-2.0mm uniform black beads Wax and graphite solid plunger for a lubricant variety of tip sizes and types
PLUnGER sLiCK™ 110 Oil based graphite free Variety of tip sizes and types applied by drip nozzle application
PLUnGER sLiCK™ 4002G Oil based graphite Variety of tip sizes and types applied by drip nozzle application
PLUnGER sLiCK™ 2000 Water based graphite free Variety of tip sizes and types applied by drip nozzle or spray application
PLUnGER sLiCK™ 2000G Water based graphite Variety of tip sizes and types applied by drip nozzle or spray application
PLUnGER sLiCK™ 202 Oil based low viscosity spray application Variety of tip sizes and types applied by spray application internal sleeve, shaft or tip
PLUnGER sLiCK™ 100T Oil based clean graphite alternative Variety of tip sizes and types applied by drip nozzle application
HYDRaulic FluiDs
QUinTOLUBRiC® 702-46 RD Water glycol fire resistant hydraulic fluid Designed to provide optimum performance in hydraulic systems where fire prevention is required.
QUinTOLUBRiC® 888-46 Fire resistant synthetic ester based hydraulic fluid Designed to replace mineral oil and water based fluids where fire resistance and premium performance is required.
ancillaRY PRODucts
QUAKERTEK™ LX 2201 General purpose grease General purpose grease used on die cast machines and auxiliary equipment. Performs well at high temperatures with a high dropping point of 500F. Extremely water resistant.
LADLE sLiCK 1 Ladle coating Adhesion preventive oil based paste for non-ferrous alloys used on thermocouples, stalk tubes, troughs, skimmers and automatic or manual ladles.
AnTi-sOLDER 7 Antisolder paste Apply a small amount with a bronze brush or a wood spatula to the accumulated solder and the surrounding area of the die.
HEAT sLiCK 200 Heat transfer oil non-toxic, non-corrosive, low odor heat transfer fluid that can absorb heat quickly and transport it to the material or process requiring temperature control.
