�
Alura Trailer Mobile Workshop
Systems
๏ Diesel Generator
๏ TIG / Electrod Welding
๏ MIG / MAG Welding
๏ Hand Grinders
๏ Hand Drille
๏ Hand Tools
๏ Air Compressor
๏ High pressure washing
๏ Column Drilled
๏ Lahte Mahcine / 1.000mm
๏ Mobile Starting Assistance
๏ Grinders
๏ Crane / 1 ton
๏ Workbench
� / �1 16 www.aluratrailer.com
�
Alura Trailer Mobile Workshop
Systems
1-Diesel Generator TJ16PE5A
� / �2 16 www.aluratrailer.com
TJ16PE5A
Diesel Generator Sets / 50 Hz
Power Output Ratings 50 Hz / 400 V
Standby Power (ESP) kVA 16
kW 13
Prime Power (PRP) kVA 14
kW 11
Standby PowerStandby power is defined as the maximum power available during a variable electrical powersequence, under the stated operating conditions, for which a generating set is capable of delivering in theevent of a utility power outage or under test conditions for up to 500 hours of operation per year under average of 70% load. Overloading is not permissible.
Prime PowerPrime power is defined as being the maximum power which a generating set is capable of delivering continuously whilst supplying a variable electrical load. Average load should be 70%. The generator canbe overloaded 10% for 1 hour per 12 hours.
Engine
Manufacturer PERKINS
Model 403A15G2
No of Cylinder / Configuration 3 INLINE
Displacement lt 1,5
Bore / Stroke mm 84 / 90
Compression Ratio 22,5:1
Aspiration Naturally Aspirated
Governor Type MECHANIC
Cooling System WATER
Coolant Capacity lt 6
Lubrication Oil Capacity lt 4,56
Electrical System VDC 12
Speed / Frequency 1500 rpm / 50 Hz
Engine Gross Power kWm 15,4
Fuel Consumption lt/h
110 % 5,04
100 % 4,3
75 % 3,11
50 % 2,24
Exhaust Outlet Temperature °C 470
Exhaust Gas Flow m³/min 2,2
Combustion Air Flow m³/min 1,08
Cooling Air Flow m³/min 25,2
Alternator
Manufacturer MARELLI
Model MJB160SA4
No of Phase 3
Power Factor 0,8
No of Bearing SINGLE
No of Poles 4
No of Leads 12
Voltage Regulation ( Steady State) ± %1
Insulation Class H
Degree of Protection IP 23
Excitation System AVR (Automatic Voltage Regulator), Brushless
Connection Type STAR
Total Harmonic Content (No Load) < %2
Frequency Hz 50
Voltage Output VAC 230 / 400
Rated Power (Standby) kVA 18,7
Efficiency % 85,6
W x L x H (mm) Weight (kg) lt Fuel Tank (lt) Noise dB(A)
@ 1m
Canopied 700 x 1750 x 1200 520 75 70
Open Skid 700 x 1250 x 950 370 75 TBA
Technical information and values are according to ISO8528, ISO3046,NEMA MG1.22, IEC 600341, BS 49995000, VDE 0530 standards. Producing with ISO9001, ISO14001, OHSAS18001, TSE, CE standards. All information given in this leaflet is intended for general purposes only. Due to a policy continuous improvement Teksan reserves the right to amend details and specifications without notice and all information given is subject to the Teksan's current condition of sales.
TBA: To Be Ask TBD: To Be Determined NA: Not Avaliable N/A: Not Applicable TTD16PE5A0314EN
www.teksangenerator.com
06.10.2015 12:54
�
Alura Trailer Mobile Workshop
Systems
2- TIG / Electrod Wedding
� / �3 16 www.aluratrailer.com
6.10.2015 17:24TECHNOLOGY TIG 222 AC/DC HF/LIFT +ACC. - 852031
Sayfa 1 / 1http://www.telwin.com/webtelwin/site.nsf/(SchedaProdotto)?openagent&lingua=E&cdpar=852031&clmer=81
TECHNOLOGY TIG 222 AC/DC HF/LIFT +ACC. code 852031
Microprocessor controlled, TIG (high frequency HF or LIFT striking), PULSE TIG and MMA inverter welding machine in direct andalternating current (AC/DC). Use with a wide range of materials such as steel, stainless steel, aluminium, titanium, copper,nickel, magnesium and their alloys. Characteristics: TIG regulations: post gas, current down slope/time, bi-level, balance * MMAregulations: arc force according to the type of electrode in use * 2/4 times operation * hot start and anti-stick devices * remotecontrol connector * check control at starting * MMA electrodes: rutile, basic, stainless steel and cast iron * thermostatic,overcurrent, overvoltage, undervoltage protections. Complete with TIG welding accessories.
WELDS ALL METALS AESTHETICS QUALITYWITH PULSE WELDING
PARAMETERS DIGITALADJUSTMENT
FIT FOR REMOTECONTROLS
PERSONALIZATIONADVANCE PARAMETERS
Technical Data
Standards: LVD: EN 60974-1 LVD: EN 50445 EMC: EN 60974-10
V50/60Hz A A EN60974-1 A EN60974-1 V A A852031 230 5 200 100 100 20 34
1 ph 200 24 % 34
n% cosphi mm cm(L,W,H) kg3 77 0,6 1,6 IP23 43 17,3 800489781214 4
5,5 4 1734
�
Alura Trailer Mobile Workshop
Systems
3- MIG / MAG Welding
� / �4 16 www.aluratrailer.com
6.10.2015 17:27DIGITAL MIG 330 230-400V - 820030
Sayfa 1 / 1http://www.telwin.com/webtelwin/site.nsf/(SchedaProdotto)?openagent&lingua=E&cdpar=820030&clmer=81
DIGITAL MIG 330 230-400V code 820030
Microprocessor controlled, MIG-MAG/BRAZING synergic welding machine, with built-in 4 rolls wire feeder. It is particularlysuitable for use in light metal works and body shop, for welding galvanised sheets, HSS high strength steel, stainless steel andaluminium sheets. The innovative SYNERGIC DIGIDESK technology allows for a rapid and easy setting of the weldingprogrammes and grants always a high control both of the arc and of the quality of the welding. Characteristics: automaticsetting of wire speed according to the features of the material being welded, the shielding gas and the wire diameter *monitoring of power voltage supply * 2/4 strokes, spot operations * automatic torch recognition * regulation of wire speed upslope, post gas time, wire burn-back time * use with spool gun torch * thermostatic protection. Complete with MIG-MAGwelding accessories.
Technical Data
Standards: LVD: EN 60974-1 LVD: EN 50445 EMC: EN 60974-10
V50/60Hz A A EN60974-1 A EN60974-1 V kW A820030 230 / 400 40 300 215 41 7,5 16 / 10
3 ph 320 25 % 11
cosphi nr mm mm mm mm cm(L,W,H)0,9 12 0,6 0,8 0,8 0,8 IP22 87
1,2 1,2 1,2 1,2 45,380
kg pz/pallet81 800489764557 5 3
�
Alura Trailer Mobile Workshop
Systems
4-Hand Grinders
Bosch GWS 22 - 180 H Professional
Rated power input 2.200 W No-load speed8. 500 rpm Grinding spindle thread M 14 Main handle Straight Disc diameter 180 mm Weight 5,0 kg
� / �5 16 www.aluratrailer.com
�
Alura Trailer Mobile Workshop
Systems
5- Hand Driller
GBM 13-2 RE Professional
Rated power input 710 W No-load speed 0 – 1.000 / 3.000 rpm Power output 365 W Weight 2,4 kg Rated speed 500 / 1.750 rpm Rated torque 6,8 / 2,5 Nm Drill spindle connecting thread 1/2" – 20 UNF Max. torque 39,5 / 12,5 Nm drilling range Drilling diameter in aluminium 20 / 12 mm Drilling diameter in wood 32 / 20 mm Drilling diameter in steel 13 / 8 mm
� / �6 16 www.aluratrailer.com
�
Alura Trailer Mobile Workshop
Systems
6- Hand Tools 118 piecs
� / �7 16 www.aluratrailer.com163
07 Workshop Trolleys, Cabinets and BoxesAtölye Dolapları ve Takım ÇantalarıWorkshop Trolleys, Cabinets and BoxesAtölye Dolapları ve Takım Çantaları
TAKIM MUHTEVİYATI
LARGE UNIVERSAL TOOL ASSORTMENT
TL
41072101512 2200.0128
Stok Kodu Ürün No.
29.10 2.976,55
!İçindekiler / Contents
118 parça metrik muhteviyat
118 pieces in metric sizes”
Stok Kodu Ürün N !İçindekile / Contents
05036x7 - 8x9 - 10x11 - 12x1314x15 - 16x17 - 18x1920x22 - 21x23 - 24x2625x28 - 27x32 mm
10
01006x7 - 8x9 - 10x11 - 12x1314x15 - 16x17 18x19 - 20x2221x23 - 24x26 - 25x2827x32 mm
12
0300 6˝ C - 10˝ C - 12˝ C 18
5100 10 - 11 - 12 - 13 - 14 - 15 - 16 17 - 18 - 19 - 21 - 22 - 23 - 2426 - 27 - 28 - 30 - 32 mm
31
5140 37
5150 5˝ - 10˝ 37
5190.5048 36
5130 37
150 3 - 4 - 5.5 - 6.5 - 8 - 10 mm3 - 4 - 5.5 - 6.5 - 8 - 10 mm3 - 4 - 5.5 - 6.5 - 8 - 10 mm 66
153 6.5 mm 67
170 6.5 mm 67
160 0 - 1 - 2 - 3 mm 68
161 2 mm 69
33 5.5 - 6 - 7 - 8 - 9 - 10 mm 73
4615 YB 4 x 195 mm 76
37102 - 2.5 - 3 - 4 - 5 - 6 - 7 - 89 - 10 - 12 - 14 -17 - 1922 mm
84
2830 160 - 180 - 200 94
2845 160 94
2851 160 95
2832 160 96
2824 10˝ 100
2010 10 101
2820 10˝ 100
2175 1.1/2˝ 102
2412 250 104
0406 24x27 - 28x30 mm 112
0450 1 - 140 114
405Y 440 mm 117
268 40 mm 119
9200 500 gr 118
350 4 - 5 mm 121
351 2 - 4 - 6 mm 121
352 125 - 150 - 200 mm 121
353 5 mm 122
355 6 - 7 - 8 mm 122
644 5 sıra 128
100 250 gr 130
�
Alura Trailer Mobile Workshop
Systems
7- Air Compressors
� / �8 16 www.aluratrailer.com
�
Alura Trailer Mobile Workshop
Systems
8- High pressure washing
Product Model Flow Pressure Motor Electrical Weight Code (l / h) (bar) power (kg) (hp)
R10203 ST 200 PS 900 200 bar 7,5 hp 380V-3 50 Hz 74 kg
Features:
Trigger controls The most robust on the market with 1.5 liters of oil sump pumps 30 years experience IE2 motor with energy efficiency standards Chemical mixtures adjustable dosage syringe Chemical / foam spray 12m high pressure hose 500 liter stainless steel water tank.
� / �9 16 www.aluratrailer.com
�
Alura Trailer Mobile Workshop
Systems
9- Column Drilled
� / �10 16 www.aluratrailer.com
Capacity Ø32 mm
The maximum diameter can be used 32 mm
Max Drilling Capasity 32 mm
Max. Tappig Capacity M20-M16 Casting Iron Steel
Motor Power 1 hp.
Electricity 380 V 50 Hz, 3 Faz
Column Diameter 120 mm
Central Worktable Perpendicular Movement 450 mm
Distance Central Spindle Axis To Column 350 mm
Distance Of Spindle Movement 1500 mm
Body Material ST 37 – 2
Mors Number 4
Weight In Kg. 380 Kg
Worktable Size 700 x 450 mm
Motor Cycle 1400 Rpm
�
Alura Trailer Mobile Workshop
Systems
10- Lahte Mahcine / 1.000mm
� / �11 16 www.aluratrailer.com
SpecificationCenter height mm 330Distance between centers mm 1000Swing over bed mm 660Swing over carriage mm 460Swing in gap mm 850Width of bed mm 400Spindle nose DIN55022 N8 N11Spindle hole diameter mm 72-80-104Number of speed 16Range of spindle speed rpm 11.2-2000Number of feeds 144Range of longditudinal feeds mm/rev 0.039-24Range of transversal feeds mm/rev 0.0195-12Number of threads 288 (72x4)Metric mm 0.5-240inch " 60-1/8Module M 0.125-60DP DP 240-0.5Cross slide travel mm 350Tailstock quill diameter mm 75Quill travel mm 200Quill taper morse 5Main drive kW 7.5-11Length (For DBC 1m) mm 2550Width mm 1290Height mm 1510Weight (DBC 1 m) kg 1500
�
Alura Trailer Mobile Workshop
Systems
11- Mobile Starting Assistance
Technical data: BAT 250
Battery rated voltage 12 VStarting assistance current 700 ABattery jumper cable cross-section 25 mm²Battery jumper cable length 2 mWeight 15.0 kgDimensions (W x H x D) 216 x 272 x 277 mmSafety class (DIN 40530) IICharging status display ✓Reverse polarity and fault indicator ✓Starting without battery/with exhaustively discharged battery After manual releaseElectronics protection ✓Reverse polarity protection ✓Overload protection ✓Back-up mode ✓Starting assistance ✓Charging on vehicle electrical system ✓
� / �12 16 www.aluratrailer.com
Product İnfo:
Starting assistance with no interference and voltage peaksReverse polarity protectionMobile starting assistanceBack-up mode up to 50 AStarting possible even with battery removed or defectiveProtection against overcharging / exhaustive dischargeBAT 250 can be charged via 12 V car socket.
�
Alura Trailer Mobile Workshop
Systems
12- Grinders
Large, adjustable spark protection glassesStable, adjustable workpiece supportsEasy wheel changesRubber feet for secure, low-vibration stanceDust-protected on-off switch
Bosch GMS 200 D Professinoal
Grinding disc diameter 200 mm
Grinding disc widths 25 mm
Grinding disc bore 32 mm
Grit 36 + 60
Rated power input 700 W
Rated speed 2,800 rpm
Weight without cable 16.2 kg
� / �13 16 www.aluratrailer.com
�
Alura Trailer Mobile Workshop
Systems
13- Crane / 1 ton
� / �14 16 www.aluratrailer.com
�
Alura Trailer Mobile Workshop
Systems
14- Workbench
� / �15 16 www.aluratrailer.com
Width 2400 mmDepth 720 mmBench Height 900 mmPanel Height 1100 mmBench-top HRP 5-mm sheetDrawer Units&Measures 7x100 + 2x200 mmBody Color RAL 5015 / FlatDrawer Color RAL 7035 / FlatDrawer Capacity 95 kg.Cabinet Door HaveShelf System AdjustableShelf load capacity 125 kg.Locking System Central LockDrawer System Latch / Bearing RailBench Legs AdjustableOther Features Perforated Panel Lighting 2 x socket (220 V) Toolboxes Rack