+ All Categories
Home > Documents > Differential Correction Process

Differential Correction Process

Date post: 12-Nov-2014
Category:
Upload: zmenow
View: 1,070 times
Download: 0 times
Share this document with a friend
Description:
Guide on how to Differential Correct GPS data using Pathfinder Office
5
PATHFIDER OFFICE – DIFFERENTIAL CORRECTION Differential Correction Wizard Two files are required for Differential Correction. The first is the .ssf file(s) from the GPS unit called the ROVER file(s). The Second is the BASE STATION file(s) that will be downloaded from the internet. 1. Open the Differential Correction Wizard by using the Side Bar Short cut or from the Utilities drop down menu.
Transcript
Page 1: Differential Correction Process

PATHFIDER OFFICE – DIFFERENTIAL CORRECTION

Differential Correction Wizard

Two files are required for Differential Correction. The first is the .ssf file(s) from the GPS unit called the ROVER file(s). The Second is the BASE STATION file(s) that will be downloaded from the internet.

1. Open the Differential Correction Wizard by using the Side Bar Short cut or from the Utilities drop down menu.

2. Select the + button to add the desired .ssf file(s) for differential correction.3. Select NEXT when finished.

Page 2: Differential Correction Process

PATHFIDER OFFICE – DIFFERENTIAL CORRECTION

4. The next screens are the default settings. 5. Select NEXT each.

This is where you download the Base Station files to complete the Differential Correction process. The goal is to acquire Base Station files closest to where the GPS data was collected with the highest Integrity Index. To do this:

6. Select> SELECT button next to the BASE PROVIDER SEARCH window.7. A list of providers will appear.8. Select > UPDATE LIST

An internet search will commence comparing the GPS location of the .ssf file(s) relative to the closest Base Station.

2

Page 3: Differential Correction Process

PATHFIDER OFFICE – DIFFERENTIAL CORRECTION

To Select the Base Station closest to where the GPS data was collected select the DISTANCE at the top of the screen and it will sort by Distance.

To Select the Base Station with the highest INTERGITY INDEX select that bar at the top of the screen and it will sort by Integrity Index.

10. Once you compare Distance vs. Integrity Index select the Base Station you want to use Select > OK and the Base Station Files will download to your hard drive.

3

Page 4: Differential Correction Process

PATHFIDER OFFICE – DIFFERENTIAL CORRECTION

11. For the Output Folder Select> USE THE SAME FOLDER AS THE INPUT FILE. This will place the corrected files in the same folder as the uncorrected .ssf files.

12. For Output Filename Select> CREATE A UNIQUE FILENAME BASED ON THE INPUT FILENAME. This will retain the original file name adding .cor at the end of the name to distinguish between what files have been corrected.

13. Select> START to begin the correction process.

14. The correction window will pop up where you can monitor the process. When finished you will see the Differential Correction Complete message at the bottom of the window.

4


Recommended