www.d ias - i n f ra red . com

Digital Pyrometers PYROSPOT

Non-contact Temperature Measurement

–40 °C to 3000 °C

Our digital pyrometers PYROSPOT are radiation thermometers for a non-contact measurement of temperature between –40 °C and 3000 °C. The pyrometers for use

in industrial environments are characterized by robust housings, excellent accuracy and high reliability.

By an extensive range of accessories pyrometers can be customized individually to the application and integrated into system solutions. For parameterization of the pyrometers and interpretation of the measured data the Windows® software PYROSOFT Spot is available.

The temperature switches PYROSWITCH can detect temperatures in the range from 200 °C to 1800 °C. When exceeding an adjustable temperature threshold the switches provide a trigger signal.

PYROSPOT SeriesDigi ta l Pyrometers for Non-contact Temperature Measurement

Series 10 – Pyrometers for industry and research

RS-485 interface 0/4 to 20 mA output Keyboard and display for the adjustment of parameters and display Through-lens sighting, aiming light or camera module Special ratio pyrometers (DSR 10N/NF)

Type Spectral range Temperature range Optics

DSR 10N 0.7 µm to 1.1 µm 600 °C to 3000 °C Vario optics

DSR 10NF 0.7 µm to 1.1 µm 600 °C to 2500 °C Vario optics

DS 10N 0.8 µm to 1.1 µm 550 °C to 3000 °C Vario optics

DG 10N 1.5 µm to 1.8 µm 200 °C to 2500 °C Vario optics

DGE 10N 2.0 µm to 2.6 µm 100 °C to 1200 °C Vario optics

DP 10N 2.0 µm to 2.8 µm 50 °C to 1200 °C Vario optics

DPE 10M 3.0 µm to 5.0 µm 20 °C to 1000 °C Vario optics

DPE 10MF 3.9 µm 50 °C to 2500 °C Vario optics

DT 10G 5.14 µm 150 °C to 2500 °C Vario optics

Series 11 – Pyrometers with fibre cable

RS-485 interface 0/4 to 20 mA output Keyboard and display for the adjustment of parameters and display Short respose times from 2 ms Fibre cables Very small spot sizes Special ratio pyrometers(DSRF 11N)

Type Spectral range Temperature range Optics

DSF 11N 0.8 µm to 1.1 µm 600 °C to 3000 °C Fixed and vario optics

DGF 11N 1.5 µm to 1.8 µm 250 °C to 2500 °C Fixed and vario optics

DGEF 11N 2.0 µm to 2.6 µm 150 °C to 1200 °C Fixed and vario optics

DSRF 11N 0.7 µm to 1.1 µm 700 °C to 3000 °C Fixed and vario optics

Series 4 – Pyrometers with small optical head

RS-485 interface 0/4 to 20 mA output Opto relay outputs Keyboard and display for the adjustment of parameters and display

Type Spectral range Temperature range Optics

DT 4L 8 µm to 14 µm –40 °C to 1000 °C Fixed optics

DT 4G 5.14 µm 200 °C to 1800 °C Fixed optics

Series 30/34 – Pyrometers for glass industry

Specifically for glass industry USB/RS-485 interface 0/4 to 20 mA output Fibre cables up to 30 m

Type Spectral range Temperature range Optics

DSF 30NG 0.8 µm to 1.1 µm 600 °C to 1800 °C Fixed optics

DSF 34NG 0.8 µm to 1.1 µm 600 °C to 1800 °C Fixed optics

Picture credits: DIAS Infrared GmbH, „Gas cutting of the hot metal“, Copyright Jordache, „production line of glass bulb“, Copyright Mikheyev Viktor, „metallurgical production a burning hot metal is stretched out through rollers“, Copyright Andriy Solovyov, „Manufacture of pipes“, Copyright Bork, „Pouring of liquid metal in open hearth workshop of the metallurgical plant“, Copyright Alaettin YILDIRIM, „The furnace for automatic heating of cookies“, Copyright SSPopov, 2013 used with the licence from von Shutterstock.deleflambela, vincentmaurin, Marc Thuerbach, Wikimedia Commons, licenced under CreativeCommons-Lizenz by-sa-2.0-de, URL: http://creativecommons.org/licenses/by-sa/2.0/de/legalcode,

www.d ias - i n f ra red . com

PYROSPOT SeriesDigi ta l Pyrometers for Non-contact Temperature Measurement

Series 40 – Universal 2-wire pyrometers

2-wire pyrometers USB-interface 4 to 20 mA output Optional with fibre cable(DGF 40N, DSF 40N)

Type Spectral range Temperature range Optics

DT 40L 8 µm to 14 µm –40 °C to 1000 °C Fixed optics

DT 40G 5 µm 100 °C to 2500 °C Fixed optics

DT 40F 3.9 µm 300 °C to 2500 °C Fixed optics

DT 40C 4.5 µm 500 °C to 1800 °C Fixed optics

DG 40N 1.5 µm to 1.8 µm 250 °C to 2000 °C Fixed and vario optics

DS 40N 0.8 µm to 1.1 µm 600 °C to 2500 °C Fixed and vario optics

DGF 40N 1.5 µm to 1.8 µm 250 °C to 2000 °C Fixed and vario optics

DSF 40N 0.8 µm to 1.1 µm 600 °C to 2500 °C Fixed and vario optics

Series 42 – Cost efficient series with emissivity adjustment

Emissivity can be adjusted directly at the device Stainless steel housing

Type Spectral range Temperature range Optics

DT 42L 8 µm to 14 µm –40 °C to 1000 °C Fixed optics

DT 42G 5 µm 100 °C to 2500 °C Fixed optics

DG 42N 1.5 µm to 1.8 µm 250 °C to 1800 °C Fixed optics

DS 42N 0.8 µm to 1.1 µm 600 °C to 2500 °C Fixed optics

Series 44 – Universal bus-compatible pyrometers

RS-485 interface 0/4 to 20 mA output Optional with fibre cable(DGF 44N, DSF 44N) Special ratio pyromers(DSRF 44N)

Type Spectral range Temperature range Optics

DT 44L 8 µm to 14 µm –40 °C to 1000 °C Fixed optics

DT 44G 5 µm 100 °C to 2500 °C Fixed optics

DT 44F 3.9 µm 300 °C to 2500 °C Fixed optics

DS 44N 0.8 µm to 1.1 µm 600 °C to 2500 °C Fixed and vario optics

DG 44N 1.5 µm to 1.8 µm 250 °C to 2000 °C Fixed and vario optics

DSF 44N 0.8 µm to 1.1 µm 600 °C to 2500 °C Fixed and vario optics

DGF 44N 1.5 µm to 1.8 µm 250 °C to 2000 °C Fixed and vario optics

DSRF 44N 0.7 µm to 1.1 µm 700 °C to 1800 °C Fixed optics

PYROSWITCH Series 48 – Temperature switch

Temperature switch Adjustment of the switching point direclty at the device Potential free output (PhotoMOS Relay) very short response times 1 ms

Type Spectral range Temperature range Optics

DG 48N 1.4 µm to 1.8 µm 200 °C to 1800 °C Fixed optics

PYROSPOT D _ _ _ _ _ _ _ _ _

DIAS

DetectorS – Silicium, G – InGaAs, GE – ext. InGaAsP – PbS, PE – PbSe, T – Thermopile

R – Ratio pyrometer

F – Fibre cable

Device series 4, 10, 11, 30, 34, 40, 42, 44, 48

Spectral rangeN, F, M, C, G, L (see overview on the right)

Additional designation: G – Glass industry, V – Video camera, F – Flames

Material Spectral range

Metals, ceramics, graphite, glass melts

0.8 µm to 2.8 µm „N“

Measurements through flames and combustion gases

3.9 µm „F“

Ceramics, metals, graphite 3.0 µm to 5.0 µm „M“

CO2 measurements 4.5 µm „C“

Glass surfaces 4.8 µm to 5.14 µm „G“

Non-metals, coated metals

8 µm to 14 µm „L“

What does the device designation say?

Picture credits: DIAS Infrared GmbH, „Gas cutting of the hot metal“, Copyright Jordache, „production line of glass bulb“, Copyright Mikheyev Viktor, „metallurgical production a burning hot metal is stretched out through rollers“, Copyright Andriy Solovyov, „Manufacture of pipes“, Copyright Bork, „Pouring of liquid metal in open hearth workshop of the metallurgical plant“, Copyright Alaettin YILDIRIM, „The furnace for automatic heating of cookies“, Copyright SSPopov, 2013 used with the licence from von Shutterstock.deleflambela, vincentmaurin, Marc Thuerbach, Wikimedia Commons, licenced under CreativeCommons-Lizenz by-sa-2.0-de, URL: http://creativecommons.org/licenses/by-sa/2.0/de/legalcode,

Accessories Series 4 Series 10 Series 11 Series 30/34

Series 40 Series 42 Series 44 Series 48

Mounting angle, fixed × × × × × × ×

Mounting angle, adjustable × × × × × ×

Ball and socket mounting × × × × ×

Air purge unit × × × × × × × ×

Sighting tube × × × × × × ×

Cooling plate ×

Cooling jacket with air purge unit × × × × ×

Emissivity enhancer × × × × ×

Mirror 90° × × × × × × ×

Vacuum flange/Vacuum lead-through × × × × ×

Window slide × × × ×

Protection window × × × × ×

Connection cable × × × × × × ×

Interface module RS-485 to USB × × × × ×

Interface module RS-485 to ProfiBus DP × × × × ×

Power supply PSU 15 × × × × × × × ×

Digital display DD200/DD210 × × × × × × ×

Display and controll unit DCU 200 × × × × × × ×

Handheld programming device DHP 1040 × × × ×

More accessories available on request.

A wide range of accessories is available for all PYROSPOT series

Software PYROSOFT SpotFor evaluation and processing of measured data obtained DIAS provides two variants for its pyrometer PYROSPOT. These are the free Windows software PYROSOFT Spot and the pay version PYROSOFT Spot Pro. The Pro version allows the measurement, visualization and measurement recording of several simultaneously connected pyrometers, whereas this is possible with the free version only for one connected pyrometer..

Further functions are:– Trigger functions *)

– Extensive statistical analysis of measurement data *)

– Export of measured data as text file and automatic creation of Excel spreadsheets– Video functions for pyrometers with integrated camera module *)

– Integrated calculator for easy calculation of optics parameter– Display and parameterizing of optional digital display and control unit DCU200 and digital displays *)

– Automatic emissivity determination– Report generation from template document

*) only available for PYROSOFT Spot Pro

www.d ias - i n f ra red . com

DIAS Infrared GmbHGostritzer Straße 6501217 Dresden Germany

Phone: +49 351 871 7228Fax: +49 351 871 7230E-Mail: info@dias-infrared.deWeb: www.dias-infrared.com

We are certifiedfor many yearsaccording toISO 9001