+ All Categories
Home > Documents > DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp...

DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp...

Date post: 08-Jun-2018
Category:
Upload: dokien
View: 227 times
Download: 0 times
Share this document with a friend
32
DIN-Rail Terminal Blocks with Screw Clamp Connection Supplementary Catalog to Full Line Catalog Volume 1
Transcript
Page 1: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

DIN-Rail Terminal Blocks with Screw Clamp ConnectionSupplementary Catalog to Full Line Catalog Volume 1

Page 2: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

1Rail-Mounted Terminal Block Systems

Full Line Catalog, Volume 1 – Edition 2015/2016

Rail-

Mou

nted

Ter

min

al B

lock

Sys

tem

s

Full L

ine Ca

talog

2015

/2016

The items in this catalog supplement products found in the following main catalog

Volume 1Rail-Mounted Terminal Block Systems

Page 3: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

1

www.wago.com

2

4

16

6

8

10

23

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Through Terminal Blocks with Screw Clamp Connection35 mm², 70 mm², 95 mm²

High-Current Terminal Blocks with Stud BoltsM6 (35 mm²/2 AWG), M8 (70 mm²/3/0 AWG), M10 (120 mm²/300 kcmil), M12 (185 mm²/500 kcmil), M16 (300 mm²/600 kcmil)

Fuse Terminal Blocks with Screw Clamp Connection10 mm² (8 AWG), 25 mm² (4 AWG)

IndexAddresses

Stud Terminal BlocksM6 (35 mm²/2 AWG), M8 (50 mm²/1/0 AWG), M10 (120 mm²/250 kcmil), M12 (120 mm²/250 kcmil)

Ground Conductor Terminal Blocks with Screw Clamp Connection35 mm², 70 mm², 95 mm²

Through Terminal Blocks with Screw Clamp Connection150 mm² (300 kcmil), 240 mm² (500 kcmil)

400 Series

400 Series

885 Series

400 Series

400 Series

400 Series

Page

DIN-Rail Terminal Blocks with Screw Clamp Connection

Page 4: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

2

www.wago.com

49 mm/1.93 in

46,5

mm

/1.

83 in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Through terminal block with screw clamp connec-tion (95 mm²/4/0 AWG)Removal from the DIN-35 rail: Pull out locking device and simultaneously remove terminal block from the rail.

400 SeriesThrough Terminal Blocks with Screw Clamp Connection

Carrier rails and tools, see Volume 1, Section 13

Marking accessories,see Volume 6

Approvals and corresponding ratings, visit www.wago.com

Through terminal block, for DIN-35 rail

Color Item No. Pack. Unitgray 400-415/415-124 20

blue 400-425/425-124 20

Technical DataRatings per IEC/EN 60947-7-1Rated voltage (III / 3) 1000 VRated impulse voltage (III / 3) 8 kVRated current 125 ANominal cross-section 35 mm²

Connection DataSolid conductor 16 … 35 mm² / 6 … 2 AWGFine-stranded conductor 16 … 35 mm² / 6 … 2 AWG

Strip length 17 … 19 mm / 0.67 … 0.75 inchTerminal block width 16 mm / 0.63 inchTightening torque range 2.8 … 3 NmInsulation material Polyamide 66 (PA 66)

Accessories Item No. Pack. UnitAssembled jumper bar 2-way 400-473/473-621 10

3-way 400-473/473-622 10

4-way 400-473/473-623 10

5-way 400-473/473-624 10

10-way 400-473/473-625 10

Jumper bar, with screws and washers

Protective warning marker, with high-voltage symbol, for 3 terminal blocks

yellow 400-463/463-430 100(25)

Protective warning marker, with high-voltage symbol, for 4 terminal blocks

yellow 400-463/463-431 100(25)

Plastic screw, for protective warning marker 400-473/473-147 100(25)

Screwless end stop, for DIN-35 rail, 10 mm wide

gray 249-117 50(25)

Screwless end stop, for DIN-35 rail, 14 mm wide

Page 5: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

3

www.wago.com

74 mm/2.91 in

67,5

mm

/2.6

6 in

95 mm/3.74 in

72,5

mm

/2.8

5 in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Through terminal block, hex socket clamping screws (INB 6), for DIN-15 rail

Through terminal block, hex socket clamping screws (INB 6), for DIN-15 rail

Color Item No. Pack. Unit Color Item No. Pack. Unitgray 400-415/415-216 10 gray 400-415/415-556 10

blue 400-425/425-216 10 blue 400-425/425-556 10

IEC/EN 60947-7-1 IEC/EN 60947-7-11000 V 1000 V8 kV 8 kV192 A 232 A70 mm² 95 mm²

16 … 70 mm² / 6 … 2/0 AWG 35 … 95 mm² / 2 … 4/0 AWG16 … 70 mm² / 6 … 2/0 AWG 35 … 95 mm² / 2 … 4/0 AWG25 … 27 mm / 0.98 … 1.06 inch 25 … 27 mm / 0.98 … 1.06 inch22 mm / 0.866 inch 26 mm / 1.024 inch6 … 7 Nm 9 … 9.5 NmPolyamide 66 (PA 66) Polyamide 66 (PA 66)

Item No. Pack. Unit Item No. Pack. Unit

2-way 400-473/473-316 100(25) 2-way 400-477/477-508 100(25)

3-way 400-473/473-317 50 3-way 400-477/477-509 100(25)

5-way 400-473/473-318 10 5-way 400-477/477-510 50(25)

10-way 400-473/473-319 20 10-way 400-477/477-511 25

yellow 400-473/473-327 50(25)

yellow 400-473/473-328 100(25)

400-473/473-323 100(25)

gray 249-117 50(25) gray 249-117 50(25)

gray 249-197 50(25) gray 249-197 50(25)

Page 6: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

4

www.wago.com

49 mm/1.93 in

46,5

mm

/1.

83 in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

400 SeriesGround Conductor Terminal Blocks with Screw Clamp Connection

Carrier rails and tools, see Volume 1, Section 13

Marking accessories,see Volume 6

Approvals and corresponding ratings, visit www.wago.com

Ground conductor terminal block, with contact to the carrier rail, only for DIN 35 x 15 rails

Color Item No. Pack. Unitgreen-yellow 400-465/465-111 20

Technical DataRatings per IEC/EN 60947-7-2Nominal cross-section 35 mm²

Connection DataSolid conductor 16 … 35 mm² / 6 … 2 AWGFine-stranded conductor 16 … 35 mm² / 6 … 2 AWG

Strip length 17 … 19 mm / 0.67 … 0.75 inchTerminal block width 16 mm / 0.63 inchTightening torque range 2.8 … 3 NmInsulation material Polyamide 66 (PA 66)

Accessories Item No. Pack. UnitScrewless end stop, for DIN-35 rail, 10 mm wide

gray 249-117 50(25)

Screwless end stop, for DIN-35 rail, 14 mm wide

Page 7: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

5

www.wago.com

49 mm/1.93 in

46,5

mm

/1.

83 in

74 mm/2.91 in

67,5

mm

/2.6

6 in

87 mm/3.43 in

72 m

m/2

.84

in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Ground-neutral terminal block, with contact to the carrier rail, only for DIN 35 x 15 rails

Ground conductor terminal block, with contact to the carrier rail, only for DIN 35 x 15 rails (2.3 mm thick, copper)

Ground conductor terminal block, with contact to the carrier rail, only for DIN 35 x 15 rails (2.3 mm thick, copper)

Color Item No. Pack. Unit Color Item No. Pack. Unit Color Item No. Pack. Unitgreen-yellow/blue 400-465/465-575 10 green-yellow 400-499/499-024 10 green-yellow 400-499/499-176 10

IEC/EN 60947-7-2 IEC/EN 60947-7-2 IEC/EN 60947-7-235 mm² 70 mm² 95 mm²

16 … 35 mm² / 6 … 2 AWG 16 … 70 mm² / 6 … 2/0 AWG 35 … 95 mm² / 2 … 4/0 AWG16 … 35 mm² / 6 … 2 AWG 16 … 70 mm² / 6 … 2/0 AWG 35 … 95 mm² / 2 … 4/0 AWG17 … 19 mm / 0.67 … 0.75 inch 25 … 27 mm / 0.98 … 1.06 inch 25 … 27 mm / 0.98 … 1.06 inch32 mm / 1.26 inch 22 mm / 0.866 inch 26 mm / 1.024 inch2.8 … 3 Nm 6 … 7 Nm 9 … 9.5 NmPolyamide 66 (PA 66) Polyamide 66 (PA 66) Polyamide 66 (PA 66)

Item No. Pack. Unit Item No. Pack. Unit Item No. Pack. Unitgray 249-117 50(25) gray 249-117 50(25) gray 249-117 50(25)

gray 249-197 50(25) gray 249-197 50(25)

Page 8: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

6

www.wago.com

119,4 mm/4.7 in

114,

5 m

m/4

.5 in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Through terminal block, with end plate and 10 mm² (6 AWG) control cable connectionColor Item No. Pack. Unit

light gray 400-499/499-715 10

blue 400-499/499-717 10

Technical DataRatings per IEC/EN 60947-7-1Rated voltage (III / 3) 1000 VRated impulse voltage (III / 3) 8 kVRated current (load circuit) 309 ARated current (control cable outlet) 57 ANominal cross-section (load circuit) 150 mm²/B14Nominal cross-section (control cable outlet) 10 mm²/B14Ratings per UL/CSARated voltage (III / 3) 600 VRated impulse voltage (III / 3) 8 kVRated current (load circuit) 445 ARated current (control cable outlet) 70 ANominal cross-section (load circuit) 300 kcmilNominal cross-section (control cable outlet) 6 AWG

Connection Data (Load Circuit)Solid conductor 25 … 185 mm² / 4 AWG … 350 kcmilFine-stranded conductor 35 … 150 mm² / 2 AWG … 300 kcmil

Connection Data (Control Cable Outlet)Solid conductor 0.5 … 16 mm²Fine-stranded conductor 0.5 … 10 mm / 18 … 6 AWG

Strip length (load circuit) 35 mm / 1.37 inchStrip length (control cable outlet) 12 mm / 0.47 inchTightening torque (load circuit) 15 Nm / 88.5 … 260 lb-inTightening torque (control cable outlet) 1.2 … 1.4 Nm / 10.6 … 12.3 lb-inTool (load circuit) T-wrench (8 mm / 0.31 inch)Tool (control cable outlet) Screwdriver, (3.5 x 0.5) mm bladeTerminal block width 31 mm / 1.22 inchProtection type IP20Insulation material Polyamide 66 (PA 66)

Accessories Item No. Pack. UnitAssembled jumper bar 2-way 400-406/406-053 10(1)

3-way 400-406/406-054 5

Protective cover, IP20 light gray 400-499/499-788 50(25)

Screwless end stop, for DIN-35 rail, 10 mm wide

gray 249-117 50(25)

400 SeriesThrough Terminal Blocks with Screw Clamp Connection

Carrier rails and tools, see Volume 1, Section 13

Marking accessories,see Volume 6

Approvals and corresponding ratings, visit www.wago.com

Page 9: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

7

www.wago.com

��������������������� ����

119,4 mm/4.7 in

124,

5 m

m/4

.9 in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Open and close.

Adjust the cutout to the cable diameter.

Operate mounting system via screwdriver – mount-ing foot locks in open or closed position.

Through terminal block, with end plate and 10 mm² (6 AWG) control cable connectionColor Item No. Pack. Unit

light gray 400-499/499-704 10

blue 400-499/499-706 10

IEC/EN 60947-7-11000 V8 kV415 A57 A240 mm²/B1410 mm²/B14UL/CSA600 V8 kV400 A70 A500 kcmil6 AWG

50 … 300 mm² / 0 AWG … 600 kcmil35 … 240 mm² / 2 AWG … 500 kcmil

0.5 … 16 mm²0.5 … 10 mm / 18 … 6 AWG35 mm / 1.37 inch12 mm / 0.47 inch15 Nm / 124 … 260 lb-in1.2 … 1.4 Nm / 10.6 … 12.3 lb-inT-wrench (8 mm / 0.39 inch)Screwdriver, (3.5 x 0.5) mm blade36 mm / 1.417 inchIP20Polyamide 66 (PA 66)

Item No. Pack. Unit2-way 400-406/406-126 5

3-way 400-406/406-223 5

light gray 400-499/499-787 1

gray 249-117 50(25)

Page 10: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

8

www.wago.com

74 mm/2.91 in

73 m

m/2

.87

in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

400 SeriesFuse Terminal Blocks with Screw Clamp Connection

Carrier rails and tools, see Volume 1, Section 13

Marking accessories,see Volume 6

Approvals and corresponding ratings, visit www.wago.com

Fuse terminal block, for cartridges with indicator, D 01 (Neozed), 380 V, for DIN-35 railColor Item No. Pack. Unit

gray 400-416/416-298 10

Technical DataRatings per IEC/EN 60947-7-3Rated voltage (III / 3) 750 VRated impulse voltage (III / 3) 8 kVRated current 32 ANominal cross-section 10 mm²

Connection DataSolid conductor 0.2 … 10 mm / 24 … 8 AWGFine-stranded conductor 0.2 … 10 mm / 24 … 8 AWG

Strip length 13 mm / 0.51 inchTerminal block width 24 mm / 0.945 inchTightening torque range 1.2 … 1.4 NmInsulation material Polyamide 66 (PA 66)

Accessories Item No. Pack. UnitScrewless end stop, for DIN-35 rail, 10 mm wide

gray 249-117 50(25)

Page 11: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

9

www.wago.com

74 mm/2.91 in

73 m

m/2

.87

in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Fuse terminal block, for cartridges without indicator, (10.3 x 38) mm, 500 V, for DIN-35 railColor Item No. Pack. Unitgreen-yellow/blue 400-416/416-299 10

IEC/EN 60947-7-3750 V8 kV32 A10 mm²

0.2 … 10 mm / 24 … 8 AWG0.2 … 10 mm / 24 … 8 AWG13 mm / 0.51 inch24 mm / 0.945 inch1.2 … 1.4 NmPolyamide 66 (PA 66)

Item No. Pack. Unitgray 249-117 50(25)

Page 12: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

10

www.wago.com

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

400 Series

High-Current Terminal Blocks with Stud BoltsSystem Description

Protection against accidental contact is achieved via protec-tive covers (IP20). Two covers must be used on each terminal block.

Rail mounting for highest stability

Jumper bars – available in 2-way and 3-way versions

Center marking of the terminal block via WMB markers

• Stud terminal blocks can be assem-bled to terminal strips via threaded rod and M3 nut

• Easy connection via connecting tips

Page 13: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

11

www.wago.com

<_______________ F

_______________>

<______________________ A ______________________>

<_________________________________________________ G __________________________________________________>

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Slot for direct assembly (see table below)

Assembly

Control cable connection for 6.3 x 0.8 flat tab and screw connection

Removal

35 mm² / 400-490/490-00170 mm² / 400-490/490-002120 mm2 / 400-490/490-003

185 mm2 / 400-490/490-004300 mm2 / 400-490/490-005

Position of drilled holes for direct assembly and dimensions when using covers:

Cross section Item No. Mounting A B C D F G

35 mm² 400-490/490-001 2 screws 100,5 7,5 6,5 – 63,5 160

70 mm² 400-490/490-002 2 screws 120 7,5 6,5 – 72,5 190,5

120 mm² 400-490/490-003 2 screws 120 7,5 6,5 – 83,5 255,5

185 mm² 400-490/490-004 4 screws 135 13,5 6,5 8,5 103,5 295

300 mm² 400-490/490-005 4 screws 135 13,5 6,5 8,5 105 295

Page 14: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

12

www.wago.com

113 mm/4.45 in

52 mm/2.05 in

56,5 mm/2.22 in

51,5

mm

/2.0

2 in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

High-current terminal block, with two M6 stud boltsColor Item No. Pack. Unit

light gray 400-490/490-001 5

Technical DataRatings per IEC/EN 60947-7-1Rated voltage (III / 3) 1000 VRated impulse voltage (III / 3) 8 kVRated current 125 ANominal cross-section 35 mm²Ratings per UL/CSARated voltage (III / 3) 600 VRated current 125 ANominal cross-section 14 … 2 AWG

Connection Data (NFC)Stranded conductor 2.5 … 35 mm²Fine-stranded conductor 2.5 … 35 mm²

Connection Data (DIN)Stranded conductor 2.5 … 35 mm²Fine-stranded conductor

Connection Data (UL/CSA)Stranded conductorFine-stranded conductor

Cable lugWrench size 10 mmTightening torque 3 … 6 Nm / 26.1 lb-in

Jumper bar screwWrench size T-wrench (6 mm)Tightening torque 6 … 12 Nm / 52 lb-in

Terminal block width 27 mm / 1.063 inchInsulation material Polyamide 66 (PA 66)

Accessories Item No. Pack. UnitProtective cover, IP20 light gray 400-490/490-016 5

Jumper bar with screws 2-way 400-405/405-772 25(5)

3-way 400-405/405-773 25(5)

Control cable connection, with screws, for (6.35 x 0.8) mm flat tabs

400-405/405-767 1

Screwless end stop, for DIN-35 rail, 10 mm wide gray 249-117 50(25)

400 SeriesHigh-Current Terminal Blocks with M6, M8 and M10 Stud Bolts

High-current terminal block with stud bolts

Carrier rails and tools, see Volume 1, Section 13

Marking accessories,see Volume 6

Approvals and corresponding ratings, visit www.wago.com

Page 15: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

13

www.wago.com

140 mm/5.51 in

56 mm/2.2 in

59,5

mm

/2.3

4 in

70 mm/2.76 in140 mm/5.51 in

64 mm/2.51in

59,5

mm

/2.3

4 in

70 mm/2.76 in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

High-current terminal block, with two M8 stud bolts

High-current terminal block, with two M10 stud bolts

Color Item No. Pack. Unit Color Item No. Pack. Unitlight gray 400-490/490-002 5 light gray 400-490/490-003 5

IEC/EN 60947-7-1 IEC/EN 60947-7-11000 V 1000 V8 kV 8 kV192 A 269 A70 mm² 120 mm²UL/CSA UL/CSA600 V 600 V170 A 269 A10 … 3/0 AWG 10 AWG … 300 kcmil

6 … 95 mm² 2.5 … 35 mm²6 … 70 mm² 2.5 … 35 mm²

6 … 70 mm² 2.5 … 35 mm²

max. 300 kcmilmax. 300 kcmil

13 mm 17 mm6 … 12 Nm / 52 lb-in 10 … 20 Nm / 87 … 174 lb-in

T-wrench (6 mm) T-wrench (6 mm)6 … 12 Nm / 52 lb-in 6 … 12 Nm / 52 … 104 lb-in32 mm / 1.26 inch 42 mm / 1.654 inchPolyamide 66 (PA 66) Polyamide 66 (PA 66)

Item No. Pack. Unit Item No. Pack. Unitlight gray 400-490/490-017 5 light gray 400-490/490-018 5

2-way 400-405/405-774 25(5) 2-way 400-405/405-776 10(5)

3-way 400-405/405-775 25(5) 3-way 400-405/405-777 5

400-405/405-768 10 400-405/405-769 10

gray 249-117 50(25) gray 249-117 50(25)

Page 16: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

14

www.wago.com

163 mm/6.42 in

71 mm/2.79in

82,5

mm

/3.2

5 in

81,5 mm/3.21 in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

High-current terminal block, with two M12 stud boltsColor Item No. Pack. Unit

light gray 400-490/490-004 5

Technical DataRatings per IEC/EN 60947-7-1Rated voltage (III / 3) 1000 VRated impulse voltage (III / 3) 8 kVRated current 353 ANominal cross-section 185 mm²Ratings per UL/CSARated voltage (III / 3) 600 VRated current 353 ANominal cross-section 10 AWG … 500 kcmil

Connection Data (NFC)Stranded conductor 25 … 240 mm²Fine-stranded conductor 6 … 185 mm²

Connection Data (DIN)Stranded conductor 6 … 185 mm²Fine-stranded conductor

Connection Data (UL/CSA)Stranded conductor max. 500 kcmilFine-stranded conductor max. 500 kcmil

Cable lugWrench size 19 mmTightening torque 25 … 50 Nm / 121 … 261 lb-in

Jumper bar screwWrench size T-wrench (6 mm)Tightening torque 6 … 12 Nm / 52 … 104 lb-in

Terminal block width 55 mm / 2.165 inchInsulation material Polyamide 66 (PA 66)

Accessories Item No. Pack. UnitProtective cover, IP20 light gray 400-490/490-019 1

Jumper bar with screws 2-way 400-405/405-778 5

3-way 400-405/405-779 1

Control cable connection, with screws, for (6.35 x 0.8) mm flat tabs

400-405/405-770 10

Screwless end stop, for DIN-35 rail, 10 mm wide gray 249-117 50(25)

400 SeriesHigh-Current Terminal Blocks with M12 and M16 Stud Bolts

High-current terminal block with stud bolts

Carrier rails and tools, see Volume 1, Section 13

Marking accessories,see Volume 1, Section 13 or Volume 6

Approvals and corresponding ratings, visit www.wago.com

Page 17: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

15

www.wago.com

163 mm/6.42 in

72 mm/2.83in

91,5

mm

/3.6

in81,5 mm/3.21 in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

High-current terminal block, with two M16 stud boltsColor Item No. Pack. Unit

light gray 400-490/490-005 5

IEC/EN 60947-7-11000 V8 kV520 A300 mm²UL/CSA600 V460 A10 AWG … 600 kcmil

25 … 300 mm²6 … 300 mm²

6 … 300 mm²

max. 600 kcmilmax. 600 kcmil

24 mm25 … 50 Nm / 217 … 435 lb-in

T-wrench (6 mm)6 … 12 Nm / 52 … 104 lb-in55 mm / 2.165 inchPolyamide 66 (PA 66)

Item No. Pack. Unitlight gray 400-490/490-019 1

2-way 400-405/405-778 5

3-way 400-405/405-779 1

400-405/405-771 1

gray 249-117 50(25)

Page 18: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

16

www.wago.com

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

885 Series

Stud Terminal BlocksSystem Description

Touch guard cover – can be secured against slipping via clip. Hole must be drilled in the appropriate position (6 mm drilled hole diameter).

Assembly options – just snap cover in at the required position.

When mounting the cover to the out-er positions, drill the hole for the clip between the marker slots into the cover. Insert the pins of the clip into the drilled hole one after the other (6 mm drilled hole diameter).

Step-down adjacent jumper bar – from M8 to M6

Terminal block marking – either with WMB marker or marking strips

Fast and easy potential distribution using assembled jumper bars – double assembled jumper bar from M10 to M10 via separator

Page 19: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

17

www.wago.com

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Empty housing as placeholder (M10)

Up to three cable lugs can be connected according to: • (DIN 46234)

Cable lugs for solder-free connections, ring type, without insulating sleeve, for copper conductors and

• (DIN 46235) Cable lugs for compression connections, cover plate type for copper conductors

Install cable lugs back-to-back on the stud. Then, tighten to the required torque using a nut secured by a lock washer.

Group marking with marker carrier – either via WMB marker or marking strip

Securing a separator plate on a stud terminal block via guide pins.

First mount the terminal base over the edge for fitting onto the carrier rail.

Slide the terminal side with the spring element toward the center of the rail and press it up/down.

Page 20: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

18

www.wago.com

67 mm/2.64 in

48,7

mm

/1.9

2 in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Stud Terminal Blocks

885 SeriesStud Terminal Blocks M6, M8, M10 and M12

Carrier rails and tools, see Volume 1, Section 13

Marking accessories,see Volume 6

Approvals and corresponding ratings, visit www.wago.com

Stud terminal block, one M6 stud, for DIN-35 railColor Item No. Pack. Unit

gray 885-106 25

Technical DataRatings per IEC/EN 60947-7-1Rated voltage (III / 3) 1000 VRated impulse voltage (III / 3) 8 kVRated current 125 ANominal cross-section 35 mm²

Connection DataSolid conductor 2.5 … 35 mm² / 14 … 2 AWGFine-stranded conductor 2.5 … 35 mm² / 14 … 2 AWG

Terminal block width 17.8 mm / 0.701 inchTightening torque range 3 … 6 NmInsulation material Polyamide 66 (PA 66)

Accessories Item No. Pack. UnitAssembled jumper bar 2-way 885-406 5

3-way 885-426 5

Step-down adjacent jumper bar, M8 to M6Step-down adjacent jumper bar, M10 to M6Empty housing, 17.8 mm thick gray 885-506 25

Empty housing, 22.8 mm thickEmpty housing, 33.8 mm thickSeparator plate, 2 mm thick, 76 mm wideSeparator plate, 2 mm thick, 102.3 mm wide gray 885-526 25

Separator plate, 2 mm thick, 157 mm wideSeparator plate, with assembled jumper bar recess, 2 mm thick, 102.3 mm wide

gray 885-546 25

Separator plate, with assembled jumper bar recess, 2 mm thick, 157 mm wideCover, 1 m long transparent 885-566 1

Clip, secures cover against slipping gray 885-580 100(25)

WMB Inline, plain, stretchable from 5 … 5.2 mm, 1,500 WMB markers (5 mm) per reel

white 2009-115 1

Marking strip, plain, 11 mm wide, 50 m reel white 200-110 1

Marker carrier, for lateral marker slots, 5 mm wide

Page 21: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

19

www.wago.com

67 mm/2.64 in

56,7

mm

/2.2

3 in

67 mm/2.64 in

66,7

mm

/2.6

3 in

67 mm/2.64 in

64,7

mm

/2.5

5 in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Stud terminal block, one M8 stud, for DIN-35 rail

Stud terminal block, one M10 stud, for DIN-35 rail

Stud terminal block, one M12 stud, for DIN-35 rail

Color Item No. Pack. Unit Color Item No. Pack. Unit Color Item No. Pack. Unitgray 885-108 25 gray 885-110 20 gray 885-112 20

IEC/EN 60947-7-1 IEC/EN 60947-7-1 IEC/EN 60947-7-11000 V 1000 V 1000 V8 kV 8 kV 8 kV150 A 269 A 269 A50 mm² 120 mm² 120 mm²

2.5 … 50 mm² / 14 … 1/0 AWG 6 … 120 mm² / 10 AWG … 250 kcmil 6 … 120 mm² / 10 AWG … 250 kcmil2.5 … 50 mm² / 14 … 1/0 AWG 6 … 120 mm² / 10 AWG … 250 kcmil 6 … 120 mm² / 10 AWG … 250 kcmil22.8 mm / 0.898 inch 33.8 mm / 1.331 inch 33.8 mm / 1.331 inch6 … 12 Nm 10 … 20 Nm 10 … 20 NmPolyamide 66 (PA 66) Polyamide 66 (PA 66) Polyamide 66 (PA 66)

Item No. Pack. Unit Item No. Pack. Unit Item No. Pack. Unit2-way 885-408 5 2-way 885-410 5 2-way 885-412 5

3-way 885-428 5 3-way 885-430 5 3-way 885-432 5

885-448 5

885-470 5

gray 885-508 20

gray 885-510 20 gray 885-510 20

gray 885-540 25 gray 885-540 25

gray 885-528 25

gray 885-530 25 gray 885-530 25

gray 885-548 25

gray 885-550 25 gray 885-550 25

transparent 885-566 1 transparent 885-570 1 transparent 885-570 1

gray 885-580 100(25) gray 885-580 100(25) gray 885-580 100(25)

white 2009-115 1 white 2009-115 1 white 2009-115 1

white 200-110 1 white 200-110 1 white 200-110 1

gray 2009-198 200(25) gray 2009-198 200(25)

Page 22: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

20

www.wago.com

67 mm/2.64 in

48,7

mm

/1.9

2 in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Stud Terminal Blocks

885 SeriesStud Terminal Blocks M6, M8 and M10

Carrier rails and tools, see Volume 1, Section 13

Marking accessories,see Volume 6

Approvals and corresponding ratings, visit www.wago.com

Stud terminal block, three M6 studs, for DIN-35 railColor Item No. Pack. Unit

gray 885-306 25

Technical DataRatings per IEC/EN 60947-7-1Rated voltage (III / 3) 1000 VRated impulse voltage (III / 3) 8 kVRated current 125 ANominal cross-section 35 mm²

Connection DataSolid conductor 2.5 … 35 mm² / 14 … 2 AWGFine-stranded conductor 2.5 … 35 mm² / 14 … 2 AWG

Terminal block width 17.8 mm / 0.701 inchTightening torque range 3 … 6 NmInsulation material Polyamide 66 (PA 66)

Accessories Item No. Pack. UnitAssembled jumper bar 2-way 885-406 5

3-way 885-426 5

Step-down adjacent jumper bar, M8 to M6Step-down adjacent jumper bar, M10 to M6Empty housing, 17.8 mm thick gray 885-506 25

Empty housing, 22.8 mm thickEmpty housing, 33.8 mm thickSeparator plate, 2 mm thick, 102.3 mm wide gray 885-526 25

Separator plate, 2 mm thick, 157 mm wideSeparator plate, with assembled jumper bar recess, 2 mm thick, 102.3 mm wide

gray 885-546 25

Separator plate, with assembled jumper bar recess, 2 mm thick, 157 mm wideCover, 1 m long transparent 885-566 1

Clip, secures cover against slipping gray 885-580 100(25)

WMB Inline, plain, stretchable from 5 … 5.2 mm, 1,500 WMB markers (5 mm) per reel

white 2009-115 1

Marking strip, plain, 11 mm wide, 50 m reel white 200-110 1

Marker carrier, for lateral marker slots, 5 mm wide

Page 23: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

21

www.wago.com

67 mm/2.64 in

66,7

mm

/2.6

3 in

67 mm/2.64 in

67 m

m/2

.64

in

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

Stud terminal block, three M8 studs, for DIN-35 rail

Stud terminal block, three M10 studs, for DIN-35 rail

Color Item No. Pack. Unit Color Item No. Pack. Unitgray 885-308 25 gray 885-310 10

IEC/EN 60947-7-1 IEC/EN 60947-7-11000 V 1000 V8 kV 8 kV150 A 269 A50 mm² 120 mm²

2.5 … 50 mm² / 14 … 1/0 AWG 6 … 120 mm² / 10 AWG … 250 kcmil2.5 … 50 mm² / 14 … 1/0 AWG 6 … 120 mm² / 10 AWG … 250 kcmil22.8 mm / 0.898 inch 33.8 mm / 1.331 inch6 … 12 Nm 10 … 20 NmPolyamide 66 (PA 66) Polyamide 66 (PA 66)

Item No. Pack. Unit Item No. Pack. Unit2-way 885-408 5 2-way 885-410 5

3-way 885-428 5 3-way 885-430 5

885-448 5

885-470 5

gray 885-508 20

gray 885-510 20

gray 885-528 25

gray 885-530 25

gray 885-548 25

gray 885-550 25

transparent 885-566 1 transparent 885-570 1

gray 885-580 100(25) gray 885-580 100(25)

white 2009-115 1 white 2009-115 1

white 200-110 1 white 200-110 1

gray 2009-198 200(25)

Page 24: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

22

www.wago.com

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Rail-Mount Terminal Blocks

885 SeriesStud Terminal Blocks, Accessories

Assembled jumper bar, doublefor: Item No. Pack. UnitM16 stud bolts 885-406 5

M8 stud bolts 885-408 5

M10 stud bolts 885-410 5

M12 stud bolts 885-412 5

Assembled jumper bar, triplefor: Item No. Pack. UnitM16 stud bolts 885-426 5

M8 stud bolts 885-428 5

M10 stud bolts 885-430 5

M12 stud bolts 885-432 5

Step-down adjacent jumper bar, M8 to M6for: Item No. Pack. UnitM8/M6 stud bolts 885-448 5

Step-down adjacent jumper bar, M10 to M6for: Item No. Pack. UnitM10/M6 stud bolts 885-470 5

Empty housingfor: Color Item No. Pack. UnitM6 stud terminal blocks, 17.8 mm thick gray 885-506 25

M8 stud terminal blocks, 22.8 mm thick gray 885-508 20

M10 and M12 stud terminal blocks, 33.8 mm thick gray 885-510 20

Separator plate, 2 mm thickfor: Color Item No. Pack. UnitM6 stud terminal blocks, 102.3 mm wide gray 885-526 25

M8 stud terminal blocks, 102.3 mm wide gray 885-528 25

M10 and M12 stud terminal blocks, 76 mm wide gray 885-540 25

M10 and M12 stud terminal blocks, 157 mm wide gray 885-530 25

Separator plate, with assembled jumper bar recess, 2 mm thickfor: Color Item No. Pack. UnitM6 stud terminal blocks, 102.3 mm wide gray 885-546 25

M8 stud terminal blocks, 102.3 mm wide gray 885-548 25

M10 and M12 stud terminal blocks, 157 mm wide gray 885-550 25

Cover, 1 m long, transparentfor: Color Item No. Pack. UnitM6 and M8 stud terminal blocks transparent 885-566 25

M10 and M12 stud terminal blocks transparent 885-570 25

Clip, secures cover against slippingfor: Color Item No. Pack. UnitStud Terminal Blocks M6, M8, M10 and M12 gray 885-580 25

Carrier rails and tools, see Volume 1, Section 13

Marking accessories,see Volume 6

Approvals and corresponding ratings, visit www.wago.com

Page 25: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

23

www.wago.com

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Index and Addresses

249 Series249-117 2

400-405 Series400-405/405-767 12400-405/405-768 13400-405/405-769 13400-405/405-770 14400-405/405-771 15400-405/405-772 12400-405/405-773 12400-405/405-774 13400-405/405-775 13400-405/405-776 13400-405/405-777 13400-405/405-778 14400-405/405-779 14

400-406 Series400-406/406-053 6400-406/406-055 6

400-406/406-126 7

400-406/406-223 7

400-415 Series400-415/415-124 2

400-415/415-216 3

400-415/415-556 3

400-416 Series400-416/416-298 8400-416/416-299 9

400-425 Series400-425/425-124 2

400-425/425-216 3

400-425/425-556 3

400-463 Series400-463/463-430 2400-463/463-431 2

400-465 Series400-465/465-111 4

400-465/465-575 5

400-473 Series400-473/473-147 2

400-473/473-316 2400-473/473-317 2400-473/473-318 2400-473/473-319 2400-473/473-323 2400-473/473-327 2400-473/473-328 2

400-473/473-621 2400-473/473-622 2400-473/473-623 2400-473/473-624 2400-473/473-625 2

400-477 Series400-477/477-508 2400-477/477-509 2

400-477 Series400-477/477-510 2400-477/477-511 2

400-490 Series400-490/490-001 12400-490/490-002 13400-490/490-003 13400-490/490-004 14400-490/490-005 15400-490/490-016 12400-490/490-017 13400-490/490-018 13400-490/490-019 14

400-499 Series400-499/499-024 5

400-499/499-176 5

400-499/499-704 7400-499/499-706 7400-499/499-715 6400-499/499-717 6400-499/499-787 9400-499/499-788 6

885 Series885-106 18885-108 19885-110 21885-112 21

885-306 19885-308 19885-310 21

885-406 22885-408 22885-410 22885-412 22885-426 22885-428 22885-430 22885-432 22885-448 22885-470 22

885-506 22885-508 22885-510 22885-526 22885-528 22885-530 22885-540 22885-546 22885-548 22885-550 22885-566 22885-570 22885-580 22

2009 Series2009-110 122009-115 122009-198 14

Item Number Index

Item No. Item No. Item No. Item No.Page Page Page Page

Page 26: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

24

www.wago.com

Algeriaplease contact WAGO France

ArgentinaBruno Schillig S.A.Arenales 4030, B1604CFDFlorida, PBAPhone +54 11 4730 1100Fax +54 11 4761 [email protected]

AustriaWAGO Kontakttechnik Ges.m.b.H.Europaring F15 602Campus 212345 Brunn am GebirgePhone +43 1 6150780Fax +43 1 [email protected]

AzerbaijanAZ Technics LTD

Y.Safarov str.33, AZ1025,Baku

Phone +994 12 496 8335Fax +994 12 496 8334

AustraliaWAGO Pty. Ltd.2-4 Overseas Drive

Phone +61 03 8791 6300Fax +61 03 9701 0177

Bangladeshplease contact WAGO India

BelarusOOO FEKpr-t Pushkina 29-B220015 MinskPhone +375 17 2102189Fax +375 17 [email protected]

220006 MinskPhone +375 17 2054015Fax +375 17 2851759

BelgiumWAGO BeLux nvExcelsiorlaan 111930 ZaventemPhone +32 2 717 9090Fax +32 2 717 [email protected]

BoliviaISOTEK S.R.L.

Calle Isso #578, B/San Roque

Phone +591 721 000 27

Bosnia and Herzegovinaplease contact WAGO Bulgaria

BrazilWAGO Eletroeletrônicos LtdaRua Américo Simões 1470Sãu Roque da ChaveItupeva SP Brasil 13295-000Phone +55 11 4591 0199Fax +55 11 4591 [email protected]

BulgariaWAGO Kontakttechnik GmbH & Co. KG/

Business Center Serdika2E Akad. Ivan Geshov Blvd.

Phone +359 2 489 46 09/10Fax +359 2 928 28 [email protected]

Canadaplease contact WAGO USA

ChileDesimat Chile

Pudahuel SantiagoPhone +56 2 747 0152Fax +56 2 747 [email protected]

ChinaWAGO ELECTRONIC (TIANJIN) Co. LTDNo.5, Quan Hui RoadWuqing Development Area

Phone +86 22 5967 7688Fax +86 22 5961 [email protected]

ColombiaT.H.L. Ltda.Cra. 49 B # 91-33BogotáPhone +57 1 621 85 50Fax +57 1 621 60 [email protected]

CroatiaM.B.A. d.o.o.Frana Supila 5

Phone +385 51 275-736Fax +385 51 [email protected]

MICROSTAR d.o.o.Siget 18 b10020 ZagrebPhone +385 1 3647 849Fax +385 1 3636 [email protected]

Czech RepublicWAGO Elektro spol. sr. o.

Phone +420 261 090 143Fax +420 261 090 144

DenmarkWAGO Denmark A/S

Phone +45 44 357 [email protected]

EgyptIBN Engineering Instrumentation & Control71 a El Shaheed Ahmed Hamdi St.

Phone +20 2 721 4350Fax +20 2 722 [email protected]

EcuadorECUAINSETEC CIA LTDA

QuitoPhone +593 2 2 26 91 48Fax +593 2 2 46 18 [email protected]

EstoniaEltarko OÜLaki 14 - 50210621 TallinnPhone +372 651 7731Fax +372 651 [email protected]

FinlandWAGO Finland Oy

00550 HelsinkiPhone +358 9 7744 060Fax +358 9 7744 0660

FranceWAGO Contact SASParis Nord 283 Rue des ChardonneretsB.P. 55065 - Tremblay en France95947 - ROISSY CDG CEDEXPhone +33 1 4817 2590Fax +33 1 4863 [email protected]

GermanyWAGO Kontakttechnik GmbH & Co. KGPostfach 28 80, 32385 MindenHansastraße 2732423 MindenPhone +49 571 887-0Fax +49 571 [email protected]

GermanyWAGO Kontakttechnik GmbH & Co. KGWaldstraße 199706 SondershausenPhone +49 3632 659-0Fax +49 3632 [email protected]

Great BritainWAGO Limited

EstateRUGBY

Phone +44 1788 568 008Fax +44 1788 568 [email protected]

GreecePANAGIOTIS SP. DIMOULAS - BIOMATDIMOULAS AUTOMATIONSKritis Str. 2610439 AthenPhone +30 210 883 3337Fax +30 210 883 [email protected]

Honduras

Barrio Los Andes7 Calle entre 14 y 15 Ave. N.O.P.O. Box. 1061San Pedro SulaPhone +504 2557 1146/7Fax +504 2557 1149

Hong KongNational Concord Eng., Ltd.Unit A-B, 5/F.Southeast Industrial Building611-619 Castle Peak RoadTsuen Wan, N.T.Phone +852 2429 2611Fax +852 2429 [email protected]

HungaryWAGO Hungá¡ria KFTIpari Park, Gyár u. 22040 BudapestPhone +36 23 502-170Fax +36 23 [email protected]

Iceland

Audbrekku 9-11202 KopavogurPhone +354 520-4500Fax +354 [email protected]

IndiaWAGO Private LimitedC-27, Sector-58, Phase-IIINoida-201 301Gautam Budh Nagar (U.P)Phone +91 120 438 8700Fax +91 120 438 [email protected]

Indonesiaplease contact WAGO Singapore

Iraqplease contact WAGO Middle East

IrelandDrives & ControlsUnit F4, Riverview Business ParkNangor RoadDublin 12Phone +353 1 4604474Fax +353 1 [email protected]

IsraelComtel Israel Electronic Solutions Ltd.Bet Hapaamon20 Hataas StreetP.O. Box 6644425 Kefar-SabaPhone +972 9 76 77 240Fax +972 9 76 77 [email protected]

ItalyWAGO ELETTRONICA SRL a Socio Unico

40033 Casalecchio di Reno (BO)Phone +39 051 6132112Fax +39 051 [email protected]

JapanWAGO Co. of JAPAN Ltd.Kinshicho Prime Tower5-7, Kameido, Koto-KuTokyo 136-0071Phone +81 3 5627 2059Fax +81 3 5627 2055

Jordanplease contact WAGO Middle East

KazakhstanTOO INTANT232/2, Ryskulov avenue050061 AlmatyPhone +7 727 356 52 91/92/93Fax +7 727 327 14 92/[email protected][email protected]

TOO Technik-Tradeul. i. A. Protosanova, 81070004 Ust-KamenogorskPhone +7 7232 254 064Fax +7 7232 253 251

KoreaWAGO Korea Co., Ltd.

268, Hagui-ro, Dongan-gu, Anyang-si, Gyeonggi-do, 14056, South KoreaPhone +82 31 421 [email protected]

Kosovoplease contact WAGO Bulgaria

Latvia

Phone +371 790 1188Fax +371 790 [email protected]

LebanonGemayel Trading & Contracting

P.O. BOX 70-1096AnteliasLebanonPhone +961 4 521 029Fax +961 4 521 [email protected]

LithuaniaINSTABALT LIT UAB

Phone +370 52 322 295Fax +370 52 322 [email protected]

Luxembourgplease contact WAGO Belgium

Macedoniaplease contact WAGO Bulgaria

Republic of MacedoniaPhone +389 2 521 12 00Phone +389 2 246 11 08

Malaysia

No 806, Block A4, Leisure Commerce Square,No 9, Jalan PJS 8/9, 46150 Petaling Jaya,Selangor Darul Ehsan, MalaysiaPhone +60 3 7877 1776Fax +60 3 7877 [email protected]

HPH Materials (M) Sdn BhdNo. 4, Jalan Nilam 1/6Suban Hi-Tech Industrial Park40000 Shah AlamSelangor, D.E. MalaysiaPhone +60 3 5638 2213Fax +60 3 5638 [email protected]

Maledivesplease contact WAGO India

WAGO WorldwideCompanies and Representatives

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Index and Addresses

Page 27: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

25

www.wago.com

Mexico

Av. Del Marques 38 Bodega 3P. I. Bernardo Quintana76240 El Marques, QuerétaroPhone +52 442 221 5946Fax +52 442 221 [email protected]

MoldovaElectroservice Slavinschi T.T.

2001 KishinevPhone +373 22 274427Fax +373 22 [email protected]

MoroccoAutomatisme & Connection Maroc23, Rue Boured2ème étage, appt4Roche Noire20300 CasablancaPhone +212 522 24 21 72/73Fax +212 522 24 21 75

Nepalplease contact WAGO India

Netherlands

Laan van de Ram 197234 BW APELDOORNPhone +31 55 36 83 500Fax +31 55 36 83 [email protected]

New Zealandplease contact WAGO Australia

NHP NZ7 Lockhart PlaceMt WellingtonNew ZealandPhone +64 9 2761967Fax +64 9 [email protected]

NigeriaGIL Automations Ltd.Daily Times Complex2 Lateef Jakande Rd., Agidingbi

Phone +234 [email protected]

NorwayWAGO Norge ASJerikoveien 201067 OsloPhone +47 22 30 94 50Fax +47 22 30 94 [email protected]

Omanplease contact WAGO Middle East

Pakistan

Suit No. 14, 5th Floor, Shan ArcadeNew Garden Town, LahorePakistanPhone +92 42 594 1503 - 4Fax +92 42 585 1431

PeruManufacturas Eléctricas S.A.Av O.R. Benavides 121515000 LimaPhone +511 6196200Fax +511 6196247

Philippinesplease contact WAGO Singapore

Poland

Phone +48 71 3602970Fax +48 71 [email protected]

PortugalMORGADO & CA. LDA - SEDEEstrada Exterior daCircunvalação 3558/3560Apartado 10574435 Rio TintoPhone +351 22 9770600Fax +351 22 [email protected]

Quatarplease contact WAGO Middle East

RomaniaWAGO Kontakttechnik GmbH & Co. KG/

Bl. 1D, Et. 3, Ap. 7, Sect. 1, OP 52014144-BucurestiPhone +40-(0)31 421 85 [email protected]

Romania

3RomaniaPhone +40 21 3225074/76Fax +40 21 3225075

Russia

Dmitrovskoe shosse, 157, bldg. 12/5 127411 MoscowRussiaPhone +7 495 663-3305Fax +7 495 [email protected]

OOO Decima

124460 Moscow / SelenogradPhone +7 495 988 4858Fax +7 495 988 4858 OOO Prosoft

117437 MoscowPhone +7 495 2340636Fax +7 495 [email protected]

ITC Electronics: MoscowRadio str. 24105005 MoscowPhone +7 495 775 1845Fax +7 495 775 [email protected]

EkaterinburgPhone +7 343 216 3426

NovosibirskPhone +7 383 217 9244

St. PetersburgPhone +7 812 312 1918

Saudi ArabiaSaudi Electronic Trading Company (SETRA)P.O. Box 6071211555-RiyadhPhone +966 1 2062277Fax +966 1 [email protected]

Serbiaplease contact WAGO Bulgaria

Avalon Partners doo

11000 BeogradPhone +381 11 268 5311Fax +381 11 268 5311

Sigma doo

21000 Novi SadPhone +381 21 468 431Fax +381 21 636 1785

SingaporeWAGO Electronic Pte Ltd

Singapore 367904Phone +65 62866776Fax +65 [email protected]

SlovakiaProelektro spol. s r.o.Na barine 22

Phone +421 2 4569 2503 [email protected]

SloveniaIC elektronika d.o.o.

Phone +386 1568 0126Fax +386 1568 [email protected]

GENERA d.o.o.Prevale 10

Phone +386 14393050Fax +386 [email protected]

SloveniaElektronabava d.o.o.

Phone +386 1 58 99 300Fax +386 1 58 99 [email protected]

South AfricaShorrock Automation (Pty) LtdPostnet Suite # 219Private Bag X 8,Elardus Park0047 PRETORIAPhone +27 12 4500300Fax +27 12 4500322

SpainDICOMAT S.L.Avda. de la Industria, 36Apartado Correos, 1.17828108-Alcobendas (Madrid)Phone +34 91 662 1362Fax +34 91 661 [email protected]

SwedenWAGO Sverige ABTyskland FilialBox 11127, 161 11 BROMMABesöksadress: Adolfsbergsv. 31Phone +46 858410680Fax +46 [email protected]

SwitzerlandWAGO CONTACT SARte. de l’Industrie 19Case Postale 1681564 DomdidierPhone +41/26 676 75 00Fax +41/26 676 75 01

Sri Lankaplease contact WAGO India

SyriaZahabi Co.8/5 Shouhadaa St., P.O. Box 8262AleppoPhone +963 21 21 22 235 / 6Fax +963 21 21 22 23 [email protected]

Taiwan R.O.C.WAGO Contact, Ltd.5F., No.168, Jiankang RdZhonghe CityTaipei County 23585, TaiwanPhone +886 2 2225 0123Fax +886 2 2225 [email protected]

Thailand

4th Floor, KS Building213/6-8 Rachada-Phisek RoadDingdaeng, Bangkok 10400Phone +66 2 6935611Fax +66 2 [email protected]

US Power Distribution Co., Ltd.4th Floor, KS Building213/6-8 Rachada-Phisek RoadDingdaeng, Bangkok 10400Phone +66 2 2763040Fax +66 2 [email protected]

Tunisiaplease contact WAGO France

TurkeyWAGO Elektronik Sanayi ve Ticaret

Yukan Dudullu Mahallesi Bayraktar

Cad. Hattat Sok. No. 1034775 Ümraniye - IstanbulPhone +90 216 472 1133Fax +90 216 472 [email protected]

UkraineNPP Logicon

03150 KievPhone +380 44 5228019Fax +380 44 [email protected]

OOO Micropriborul. Kotelnikova, 403115 KievPhone +380 44 5369386Fax +380 44 [email protected]

United Arab Emirates (UAE)WAGO Middle East (FZC)SAIF Zone, Q4-282P.O. Box 120665

Phone +971 6 5579920Fax +971 6 [email protected] ElectricidadAvda. Urugay 127411100 MontevideoPhone +59 829 020 808Fax +59 829 021 230

USAWAGO CORPORATIONN120 W19129 Freistadt RoadGermantown, WI 53022Phone +1 262 255 6222Fax +1 262 255 3232Toll-Free: 1-800 DIN Rail (346-7245)[email protected]

VenezuelaPETROBORNAS, C.A.C.C. PLAZA AEROPUERTO - PISO 1 - LOCAL P1 - B - 03(8015) UNARE - PUERTO ORDAZ -

-ZUELAPhone +58 286 951 3382Fax +58 286 951 [email protected]

Vietnamplease contact WAGO Germany (Minden)

Current addresses at www.wago.com

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Index and Addresses

Page 28: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

26

www.wago.com

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Index and Addresses

Notes

Page 29: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

27

www.wago.com Supplementary Catalog | Index and Addresses

DIN-Rail Terminal Blocks with Screw Clamp Connection

Page 30: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

28

www.wago.com

DIN-Rail Terminal Blocks with Screw Clamp Connection

Supplementary Catalog | Index and Addresses

Notes

Page 31: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

is a registered trademark of WAGO Verwaltungsgesellschaft mbH.

Page 32: DIN-Rail Terminal Blocks with Screw Clamp Connection · Through Terminal Blocks with Screw Clamp Connection 150 mm² ... 3-way 400-473/473-317 50 3-way 400-477/477-509 100 ... DIN-Rail

WAGO Kontakttechnik GmbH & Co. KGPostfach 2880 · 32385 MindenHansastraße 27 · 32423 [email protected] 08

88-0

084/

0202

-690

1 - D

IN-R

ail T

erm

inal

Blo

cks

with

Scr

ew C

lam

p C

onne

ctio

n - U

S - 0

9/20

16-0

0 - P

rinte

d in

Ger

man

y - S

ubje

ct to

des

ign

chan

ges


Recommended