Contents [hide] 1 DIN 1 to DIN 999 1.1 DIN 1 to DIN 99 1.2 DIN 100 to DIN 199 1.3 DIN 200 to DIN 1.4 DIN 300 to DIN 1.5 DIN 400 to DIN 1.6 DIN 500 to DIN 1.7 DIN 600 to DIN 1.8 DIN 700 to DIN 1.9 DIN 800 to DIN 1.10 DIN 900 to DI 2 DIN 1000 to DIN 9999 2.1 DIN 1000 to DI 2.2 DIN 2000 to DI 2.3 DIN 3000 to DI 2.4 DIN 4000 to DI 2.5 DIN 5000 to DI 2.6 DIN 6000 to DI 2.7 DIN 7000 to DI 2.8 DIN 8000 to DI 2.9 DIN 9000 to DI 3 DIN 10000 to DIN 1999 3.1 DIN 10000 to D 3.2 DIN 11000 to D 3.3 DIN 12000 to D 3.4 DIN 13000 to D 3.5 DIN 14000 to D 3.6 DIN 15000 to D 3.7 DIN 16000 to D 3.8 DIN 17000 to D 3.9 DIN 18000 to D 3.10 DIN 19000 to 4 DIN 20000 to DIN 2999 4.1 DIN 24000 to D 4.2 DIN 28000 to D 5 DIN 30000 to DIN 3999 5.1 DIN 31000 to D 6 DIN 40000 to DIN 4999 7 DIN 52551 to DIN 5999 8 DIN 60000 to DIN 6999 9 DIN 70000 to DIN 7999 10 See also 11 External links DIN 1 to DIN 999[edit] DIN 1 to DIN 99[edit]
Transcript
Contents
DIN
[hide] 1 DIN 1 to DIN 9991.1 DIN 1 to DIN 991.2 DIN 100 to DIN 199
1.3 DIN 200 to DIN 2991.4 DIN 300 to DIN 3991.5 DIN 400 to DIN 4991.6 DIN 500 to DIN 5991.7 DIN 600 to DIN 6991.8 DIN 700 to DIN 7991.9 DIN 800 to DIN 8991.10 DIN 900 to DIN 999
2 DIN 1000 to DIN 99992.1 DIN 1000 to DIN 19992.2 DIN 2000 to DIN 29992.3 DIN 3000 to DIN 39992.4 DIN 4000 to DIN 49992.5 DIN 5000 to DIN 59992.6 DIN 6000 to DIN 69992.7 DIN 7000 to DIN 79992.8 DIN 8000 to DIN 89992.9 DIN 9000 to DIN 9999
3 DIN 10000 to DIN 199993.1 DIN 10000 to DIN 109993.2 DIN 11000 to DIN 119993.3 DIN 12000 to DIN 129993.4 DIN 13000 to DIN 139993.5 DIN 14000 to DIN 149993.6 DIN 15000 to DIN 159993.7 DIN 16000 to DIN 169993.8 DIN 17000 to DIN 179993.9 DIN 18000 to DIN 189993.10 DIN 19000 to DIN 19999
4 DIN 20000 to DIN 299994.1 DIN 24000 to DIN 249994.2 DIN 28000 to DIN 28999
5 DIN 30000 to DIN 399995.1 DIN 31000 to DIN 31999
6 DIN 40000 to DIN 499997 DIN 52551 to DIN 599998 DIN 60000 to DIN 699999 DIN 70000 to DIN 7999910 See also11 External links
Technical drawings - Axonometric projections, Isometric projectionTechnical drawings - projections, termsProjection displays in Normal, views and special presentationsParallel Pins
ISO general purpose metric screw threads - Part 19: Nominal profiles
ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizesISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profileOblique Standard Typeface for DrawingsUpright Standard Typeface for Drawings
Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
Protrusions of bolt endsProduct grade A slotted cheese head screwsProduct grade A slotted pan head screwsTab washers with long tabSplit pinsSlotted Raised Countersunk (Oval) Head Wood Screws
Whitworth pipe threads 1/4"-6" Thread diameter, sizes, teaching informationISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mmISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mmISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mmISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mmISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mmISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mmISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mmISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mmISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mmISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mmISO general purpose metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads; nominal diameter from 130 mm to 1000 mmISO general purpose metric screw threads - Part 12: 1 to 300 mm diameter coarse and fine pitch threads Selected diameters and pitchesISO general purpose metric screw threads - Part 13: Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes
ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the preferred tolerance classes; nominal sizes from 1 mm to 68 mmISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mmISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 25 mm to 52 mmISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 53 mm to 110 mmISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 112 mm to 180 mmISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 182 mm to 250 mmISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 252 mm to 1000 mm
ISO general purpose metric screw threads - Part 28: Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter; Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles
Thread run-outs and threadundercuts for ISO metric threads in accordance with DIN 13-1
ISO Metric Trapezoidal Screw Thread; ProfilesISO Metric Trapezoidal Screw Thread; General PlanISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General PurposeISO Metric Trapezoidal Screw Thread; Nominal Dimensions
ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design featuresClay masonry units - Part 1: Solid and hollow bricks with density classes of 1,2Clay masonry units - Part 2: Solid and hollow bricks with density classes equal 1.0Clay masonry units - Part 3: Tile and high strength-high-strength clinker
Clay masonry units - Part 4: Ceramic bricksClay masonry units - Part 5: Lightweight long-hole brick and light long-hole brick panelsClay masonry units - Part 6: High precision unitsClay masonry units - Part 100: Clay masonry units with specific properties
Washers; medium type, primarily for hexagon bolts
Product grade A washers - with a hardness up to 250 HV designed for use with hexagon head bolts and nuts
Product grade A washers - with a hardness up to 300 HV designed for use with hexagon head bolts and nutsProduct grade C washers - designed for use with hexagon head bolts and nutSpring lock washers with square ends or tang endsCurved and wave spring lock washersSpring washers, curved or wave
TITLE
Technical drawings; Hatchings; Representation of cutting edges and materialsMachine Reamers with Screwed-on BladesFasteners - Part 1: Technical delivery conditions; General requirementsFasteners - Part 2: Technical delivery conditions; Bolts, Screws, Nuts and Similar Threaded and Formed Parts; Types and Dimensional AccuracyFasteners - Part 3: Technical delivery conditions; Property classes for carbon steel and alloy steel bolts and screws; Conversion of property classesFasteners - Part 4: Technical delivery conditions; Property classes for nuts (previous classes)Fasteners – Part 5: Technical delivery conditions; Acceptance inspection; modified version of ISO 3269, 1984 editionFasteners - Part 6: Technical delivery conditions; Designs and accuracy of measurement for product grade FFasteners - Part 9: Technical delivery conditions; Bolts made of unalloyed or low-alloy steelsFasteners - Part 9: Technical delivery conditions; Components with Electroplated CoatingsFasteners - Part 10: Technical delivery conditions; Hot dip galvanized partsFasteners - Part 11: Technical delivery conditions (with additions to ISO 3506); Corrosion-resistant stainless steel fastenersFasteners - Part 12: Technical delivery conditions; Self-tapping screws
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal DiameterISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal DiameterISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal DiameterISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter
Fasteners - Part 15: Technical delivery conditions; Prevailing torque type nutsFasteners - Part 18: Technical delivery conditions; Components made of Non-ferrous Metals
Fasteners - Part 19: Technical delivery conditions; Surface discontinuities on bolts and screws
Fasteners - Part 20: Technical delivery conditions; Surface discontinuities on nuts
Fasteners - Part 21: Technical delivery conditions; Widening test on nutsFasteners - Part 23: Technical delivery conditions; Property classes for nuts with fine thread (ISO classes)Fasteners - Part 24: Technical delivery conditions; Property classes for nuts (Hardness classes)Fasteners - Part 25: Technical delivery conditions; Torsion testing of M1 to M10 bolts and screwsFasteners - Part 26: Technical delivery conditions; Conical spring washers for bolt/nut assembliesFasteners - Part 27: Technical specifications; Steel screws, bolts and studs with adhesive coatingFasteners - Part 28: Technical specifications; Steel screws, bolts and studs with locking coating
Fasteners - Part 30: Technical specifications; Metric thread rolling screws of property class 10.9Building costs; Part 1: Building constructionBuilding costs; Part 2: Classification of costBuilding costs; Part 3: Ascertainment of cost
TITLE
Wing nuts with rounded wingsWing screws with rounded wingsPreferred Numbers and Series of Preferred Numbers; Basic Values, Calculated Values, Rounded ValuesPreferred Numbers and Series of Preferred Numbers; Introduction60° centre holes; types R, A, B, and CCenter holes 60° with thread for shaft ends for rotating electrical machinesCentre holes for rail vehicles axlesMachine tools; 60° centre holes; dimensioningCentre holes 90°, form S; dimensions, determination processCenter Holes; Indications on Technical DrawingsParallel shank twist drills, jobber series
TITLE
Slotted capstan screws
Fasteners - Part 13: Technical delivery conditions; Components for Bolted Connections Made Mainly from Materials Exhibiting a High Impact Strength at Low Temperature or from Materials with a High Temperature Strength
Fasteners - Part 29: Technical specifications; Product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C
Sets of taps - Sets of 3 taps for metric coarse ISO-threads M1 to M68Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0,2 to M10 × 1,25Machine screwing taps for fine pitchmetric ISO-threads M3 × 0,2 to M52 × 4
Engineering drawing practice; dimensioning; concepts and general principlesEngineering drawing practice; dimensioning; principles of applicationEngineering drawing practice; dimensioning; tolerancing of linear and angular dimensions (modified version of ISO 406:1987)Slotted set screws with long dog pointSlotted headless screws with chamfered endHexagon nuts, Grade CWashers for use with cheese head screwsProduct grade A washers - with a hardness up to 250 HV designed for use with cheese head screwsProduct grade A washers - with a hardness up to 300 HV designed for use with cheese head screwsSlotted set screws with cup point
Hexagon thin nutsUnchamfered hexagon thin nuts - Product grade B
Chamfered hexagon thin nuts - Product grades A and BWashers for use in timber constructionsEyeboltsGraphical Representation in Systems of CoordinatesMachine Tools; Internal Tab Washers for Slotted Round Nuts for Hook Spanner according to DIN 1804Knurled thumb screws, high typeKnurled nuts, high typeKnurled nuts, low typeCirclips (retaining rings) for shafts; Normal type and heavy type
Trimmed Sizes of Paper - C Series
Square head bolts with short dog point
TITLE
Metal washers; technical delivery conditionsRound nuts with set pin holes in sideSlotted set screws with flat pointSlotted set screws with cone pointM5 to M100x6 hexagon nuts - Product grade CHexagon head screwsCollar eyebolts for lifting purposes
TITLE
M5 to M52 hexagon head bolts; product grade CMushroom head square neck boltsHexagon fits bolts with long threadRolling bearings; single row radial contact ball bearingsRolling bearings; double row radial contact ball bearingsRolling bearings; radial contact groove ball bearings with flanged outer ringKnurled thumb screws, low type
Envelopes - Part 1: SizesEnvelopes - Part 2: Envelopes for Processing in Enveloping Machines, Size C6 to C4
TITLE
Tested, non-calibrated, long-link round steel chainsCalibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 3,5dCalibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 3,5dCalibrated and tested grade 3 round steel link chainsFoundation Blocks
TITLE
Standards Work - Part 1: PrinciplesStandardization - Part 2: Presentation of standards; examples for presentation of figures, tables and part listsStandardization - Pdfart 3: ConceptsStandardization - Part 4: Working procedureStandardization - Part 11: Presentation of Standards concerning safety regulations which are VDE-Specifications or VDE-GuidelinesStandardization - Part 12: Presentation of standards concerning safety regulationsStandardization - Part 13: Adoption of European documents of CEN, CENELEC and of ETSI; Concepts and presentationStandardization - Part 15: Implementation of ISO and IEC international documents; Concepts and presentationStandardization - Part 120: Guidelines for the inclusion of safety aspects in standards (ISO/IEC Guide 51:1999)Technical drawings; Folding to filing sizeHand Operated Wrenches and Sockets; Technical Specifications
TITLE
Hexagon socket screw plugs with parallel screw threadHexagon-duty hexagon head screw plugsHexagon Socket Screw Keys
Hexagon socket head cap screws (modified version of ISO 4762)Hexagon socket set screws with flat point (ISO 4026 modified)Hexagon socket set screws with cone point (ISO 4029 modified)Hexagon socket set screws with full dog pointHexagon socket set screws with cup point (ISO 4029 modified)Fasteners; Terminology; Spelling of terms; AbbreviationsOverview of European Standards for fastenersTechnical Drawings; Wood Processing; PrinciplesSlotted pan head screws with large headSlotted pan head screws with shoulderHexagon weld nutsFine thread pitch partially threaded screwsM1,6 to M39 Hexagon Cap Screws Partially Threaded - Product grades A and BM42 to M160x6 Hexagon Cap Screws Partially Threaded - Product grade B
M1,6 to M52 Hexagon Cap Screws Fully Threaded - Product grades 8.8
Hexagon nuts with metric coarse and fine pitch thread - Product classes A and BHexagon slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grades A and BM42 to M160x6 hexagon head bolts; product grade BHexagon slotted nuts with metric coarse pitch thread - Product grade CM8 to M52 and M8x1 to M52x3 hexagon thin nuts; product grades A and BHexagon thin castle nutsStuds with a length of engagement equal to about 1 dStuds with a length of engagement equal to about 1,25 dDetermination of coefficient of friction of bolt/nut assemblies under specified conditions
M8x1 to M100x4 hexagon head bolts with fine pitch thread - Product grades A and BM8x1 to M52x3 hexagon head bolts with fine pitch thread - Product grades A and BDesignation system for fastenersSlotted countersunk head screws (with countersunk heads as specified in ISO 2009-1972)Slotted raised countersunk oval head screws
Cross recessed countersunk flat head screwsCross recessed raised countersunk head screwsHexagon nuts; Style 1; Metric coarse thread, Product grades A and B; ISO 4032 modifiedStyle 1 hexagon nuts with metric fine pitch thread; property classes 6 and 8Style 2 hexagon nuts with metric fine pitch thread; property classes 10 and 12M5 to M39 hexagon nuts; style 1; product grade C (modified version of ISO 4034)Threaded rodsMetric thread stud boltsMetric interference-fit thread stud boltsHexagon weld nuts with flangeHexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grades A and B
All-metal prevailing torque type hexagon nutsLocknuts for use with rolling bearings
Prevailing torque type hexagon nuts with nonmetallic insertRetaining rings with lugs for use on shafts (external circlips)Prevailing torque type hexagon thin nuts with nonmetallic insertPrevailing torque type hexagon domed cap nuts with non-metallic insertShim rings and supporting rings
TITLE
Hot rolled I-sections - Part 1: Narrow flange I-sections, I-serie - Dimensions, masses, sectional propertiesHot rolled I-beams - Part 2: Wide flange I-beams, IPB-serie; dimensions, masses, sectional propertiesHot rolled I-beams; wide flange I-beams, light pattern, IPBl-serie; dimensions, masses, sectional propertiesHot rolled I-beams; wide flange I-beams heavy pattern, IPBv-serie; dimensions, masses, sectional propertiesHot rolled I-beams; medium flange I-beams, IPE-serie; dimensions, masses, sectional propertiesUnits - Part 1: Names and SymbolsUnits - Part 2: Submultiples and Multiples for General Use
Units - Part 3: Conversions of Units No Longer To Be UsedGeneral Mathematical Symbols and ConceptsVectors, matrices, tensors; symbols and conceptsLetter symbols for physical quantities - Part 1: Symbols for general useLetter symbols for physical quantities - Part 2: Symbols for use in meteorology and geophysicsLetter symbols for physical quantities - Part 3: Symbols for use in electric power engineeringLetter symbols for physical quantities - Part 5: Symbols for use in fluid mechanicsLetter symbols for physical quantities - Part 9: Symbols for use in the field of static converters using semiconductor devicesLetter symbols for physical quantities - Part 9: Symbols for equivalent circuits of piezoelectric crystals(Mechanical) vibrations, oscillations and vibration systems - Part 1: Basic concepts, survey(Mechanical) vibrations, oscillations and vibration systems - Part 2: Linear vibration systems with single degree of freedom(Mechanical) vibrations, oscillations and vibration systems - Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedomVibration; Vibrating Continua, WavesPhysical Quantities and Equation; Concepts, Methods of WritingAngle; Concepts, Units
Electromagnetic Field - Part 2. Material QuantitiesElectromagnetic Field - Part 3. Electromagnetic WavesVocabulary for value management, value analysis and functional analysis - Part 1: Value analysis and functional analysisValue Management, Value Analysis, Functional Analysis Vocabulary - Part 2: Value ManagementAcoustics; SymbolsPresentation of Numerical DataWriting and Typesetting of FormulaeTime; Calendar, Numbering of Weeks, Date of Day, (Clock) TimeArrangement and Numbering in Texts; Clauses, Paragraphs, EnumerationsPublications in Sciences, Technology, Economy and Administration; Presentation of Manuscripts and TyposcriptsPublications in Sciences, Technology, Economy and Administration; Presentation of Clean Copies for Reprographic UsePublications in Sciences, Technology, Economy and Administration; Typographical PresentationPublications in Sciences, Technology, Economy and Administration; Presentation of Scientific and Technical ReportsMedium type washers for pinsClevis pins without headClevis pins with headLegibility of Typefaces – GeneralLettering - Linear-Antiqua without serifes – GeneralTypefaces - lineal Linear-Antiqua; lettering for transportationLettering - Linear-Antiqua without serifes; lettering for printingTypefaces - lineal Linear-Antiqua; stenciled lettering for engraving and other processesGuidelines for the Establishment and Development of Thesauri; Monolingual ThesauriGuidelines for the Establishment and Development of Thesauri; Multilingual ThesauriGrooved Pins, Full Length Parallel-grooved with PilotGrooved Pins, Full Length Taper-groovedGrooved Pins, Half Length Taper-groovedGrooved Pins, Full Length Parallel-grooved with ChamferGrooved Pins, Half Length Reverse-groovedGrooved Pins, Third Length Centre-groovedRound Head Grooved PinsCountersunk Head Grooved PinsSpring-Type Straight Pins (Roll Pins) - Heavy TypeBibliographic references to documents - Part 1: Full References to Printed and Published DocumentsBibliographic references to documents - Part 2: Rules for Citing
Bibliographic references to documents - Part 3: Indexes of cited documents (bibliographies)Pattern Equipment for Foundries; Production and QualityTools for moulding - Part 1: Ejector pins with cylindrical headTools for moulding - Part 2: Shouldered ejector pinsTools for moulding - Part 3: Ejector pins with conical headHexagon domed cap nutsSoft Solders; Composition, Technical Delivery ConditionAluminium and aluminium alloys - Unalloyed aluminium ingots for remelting – SpecificationsAluminium; Half-Finished ProductsStrips, Plates and Sheets of Aluminium and WroughtSeamless Drawn Copper Tubes for Piping SystemsRound Rod of Aluminium (Highest Grade Aluminium)Slotted Round Nut for Hook Spanner; ISO Metric Fine ThreadHook wrenchesRound Nut with Set Pin Holes Inside; ISO Metric Fine ThreadGraphical Representation of Welded, Soldered and Brazed JointsGraphical Representation of Welded, Soldered and Brazed JointsGraphical Representation of Welded, Soldered and Brazed Joints; Concepts and Terms for Soldered and Brazed Joints and SeamsSymbolic Representation on Drawings of Welded, Soldered and Brazed JointsConstruction contract procedures (VOB) - Part A: General provisions relating to the award of construction contractsConstruction contract procedures (VOB) - Part B: General conditions of contract relating to the execution of construction work
Keyboards for data and text input - Part 2: Additional requirementsSets of 2 taps for metric fine ISO-threads M1 × 0,2 to M52 × 4Vocabulary of terminology; basic conceptsSeamless precision steel tubes - Part 1: DimensionsSeamless precision steel tubes - Part 2: Technical delivery conditionsSeamless Steel Pipes and Tubes - Dimensions, Conventional Masses per Unit LengthBlank flanges - Nominal pressure 6 to 100Capillary Fittings; Bends 180° of CopperPipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions
Pipe threads for tubes and fittings; sizes for taper screw limit plug gauges for parallel internal thread
TITLE
Hose clamps with worm gear drive; shape AHose clamps - Part 2: Clamps with fastening lugs
Keyboards for data and text input - Part 1: German keyboard layout
Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Internal Thread and Conical External Thread, Gauging System and Use of GaugesWhitworth Pipe Threads for Tubes and Fittings; Gauge Dimensions
Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Screw Limit Ring Gauges for Gauging Conical External Threads, SizesWhitworth Pipe Threads for Tubes and Fittings; Conical Screw Check Plugs, Sizes
Hose clamps - Part 3: Bolt clampsHose clamps - Part 4: Technical delivery conditionsHose clamps - Part 5: Wide strip hose clamps with fastening lugs; Types D and E
TITLE
Water engineering, terms - Part 1: Dam plantsWater engineering, terms - Part 2: Waterpower plantsCorrection of waterways, termsSubsoil, Field investigations - Part 1: Cone penetration tests
Fire Behaviour of Building Materials and Building Components - Part 2: Building Components; Definitions, Requirements and TestsFire Behaviour of Building Materials and Building Components - Part 3: Fire Walls and Non-load-bearing External Walls; Definitions, Requirements and TestsFire behaviour of building materials and elements - Part 4: Overview and design of classified building materials, elements and components
Fire Behaviour of Building Materials and Building Components - Part 5: Fire Barriers, Barriers in Lift Wells and Glazings Resistant against Fire; Definitions, Requirements and TestsFire Behaviour of Building Materials and Building Components - Part 6: Ventilation Ducts; Definitions, Requirements and TestsFire behaviour of building materials and elements - Part 7: Roofing - Concepts, requirements and testingFire behaviour of building materials and components - Part 8: Small-scale test furnaceFire behaviour of building materials and elements - Part 9: seals for cable penetrations; concepts, requirements and testing
Fire behaviour of building materials and elements - Part 12: Fire resistance of electric cable systems required to maintain circuit integrity - Requirements and testingFire behaviour of building materials and elements - Part 13: Fire resistant glazing; concepts, requirements and testingFire behaviour of building materials and elements - Part 14: Determination of the burning behaviour of floor covering systems using a radiant heat sourceFire behaviour of building materials and elements - Part 15: "Brandschacht"Fire behaviour of building materials and elements - Part 16: "Brandschacht" testsFire behaviour of building materials and elements - Part 17: determination of melting point of mineral fibre insulating materials; concepts, requirements and testingFire behaviour of building materials and components - Part 18: fire barriers, verification of automatic closure (continuous performance test)Fire behaviour of building materials and building components - Part 22: Application standard for DIN 4102-4 based on the design of partial safety factorsThermal protection and energy economy in buildings - Part 1: Quantities and unitsThermal protection and energy economy in buildings - Part 2: Minimum requirements to thermal insulationThermal protection and energy economy in buildings - Part 3: Protection against moisture subject to climate conditions; Requirements and directions for design and constructionThermal insulation and energy economy of buildings - Part 7: Airtightness of building, requirements, recommendations and examples for planning and performanceThermal insulation and energy economy in buildings - Part 10: Application-related requirements for thermal insulation materials - Factory made productsStructural vibration - Part 1: Prediction of vibration parametersStructural vibration - Part 2: Human exposure to vibration in buildingsStructural vibration - Part 3: Effects of vibration on structuresService and working scaffolds - Part 1: Service scaffolds - Performance requirements, general design, structural design
Photographic sensitometry, determination of optical density: "Photographische Sensitometrie, Bestimmung der optischen Dichte" (1934-01, 1957-11, 1961-10)Photographic sensitometry, determination of the speed of black and white negative materials for pictorial photography (1971-04, 1993-05)
Photographic sensitometry, determination of diffuse transmission density (1973-01)Photographic sensitometry; determination of the speed of colour reversal films (1977-06, 1985-08)Photographic sensitometry; determination of the speed of colour negative films (1977-10, 1990-11)Photographic sensitometry; sensitometric illuminants and light sources (1980-07)
Fire behaviour of building materials and elements - Part 1: Classification of building materials - Requirements and testing
Fire behaviour of building materials and building components - Part 10: pipe encasements, pipe bushings, service shafts and ducts, and barriers across inspection openings; terminology, requirements and testing
Photographic sensitometry, determination of optical density; concepts, symbols and notations (1993-01)Photographic sensitometry, determination of optical density; geometric conditions for transmission density (1993-01)Photographic sensitometry, determination of optical density; spectral conditions (1993-01)Photographic sensitometry, determination of optical density; geometric conditions for reflection density (1993-01)Energy efficiency of heating and ventilation systems in buildings - Part 10: Heating, domestic hot water supply, ventilationEnergetic evaluation of heating and ventilation systems in existing buildings - Part 12: Heat generation and domestic hot water generation
TITLE
Rules for text presentationPhysics of radiation in the field of optics and illuminating engineering - Part 1: Quantities, symbols and units of radiation physicsPhysics of radiation in the field of optics and illuminating engineering - Part 2: Evaluation of radiation by different detectorsPhysics of radiation in the field of optics and illuminating engineering - Part 3: Quantities, symbols and units of illuminating engineeringPhysics of radiation in the field of optics and illuminating engineering - Part 4: EfficienciesPhysics of radiation in the field of optics and illuminating engineering - Part 5: Definitions for temperaturesPhysics of radiation in the field of optics and illuminating engineering - Part 6: Pupil intensity as a measure of retinal illuminationPhysics of radiation in the field of optics and illuminating engineering - Part 7: Terms for wavebandsPhysics of radiation in the field of optics and illuminating engineering - Part 8: Definitions and constants of radiation physicsPhysics of radiation in the field of optics and illuminating engineering - Part 9: Definitions in the field of luminescencePhysics of radiation in the field of optics and illuminating engineering - Part 10: Photobiologically effective radiation, quantities, symbols and actions
Clamp strength for woodworkingPlane irons for wood smooth and for planesCurved irons for jack planesLockwashers and locking plates for use with rolling bearingsSplined joints, calculation of load capacity - Part 1: general basisLogic and set theory; symbols and conceptsSigns in mathematical logicComplex quantities; nomenclatureTime-dependent quantities - Part 1: Terms for the time-dependencyTime-dependent quantities - Part 2: Letter symbolsTime-dependent quantities - Part 3: Complex representation of sinusoidal time-dependent quantitiesNotation of matricesFourier-, Laplace- and Z-transformation; symbols and conceptsDirections and signs in electrical engineering; rules for electric and magnetic circuits, equivalent circuit diagramsLogarithmic quantities and units - Part 2: Logarithmic ratios, levels in nepers and decibelsFire test to railway components
TITLE
Spherical washers and conical seatsParallel Pins, Hardened; Tolerance Zone m6Washers for clamping devices
Statistics on German meteorologicaldata for calculating the energyrequirements for heating and air conditioning equipment
Artificial lighting - Part 3: Lighting of health care premisesArtificial lighting - Part 6: Measurement and evaluationArtificial lighting - Part 7: Lighting of interiors with visual displays work stationsArtificial lighting - Part 8: Workplace luminaries - Requirements, recommendations and proofing
Paper and paper board - Lifespan classesTechnical drawings, labelingToothed lock washersSerrated lock washersLock washers (retaining washers) for shaftsBright Key Steel; Dimensions, Permissible Variations, WeightsDrive Type Fastenings without Taper Action – Part 1: Parallel Keys, Keyways, Deep PatternDrive Type Fastenings without Taper Action – Part 2: Parallel Keys, Keyways, Deep Pattern for Machine Tools, Dimensions and ApplicationDrive Type Fastenings without Taper Action – Part 3: Parallel Keys, Shallow Pattern, Dimensions and ApplicationScrew and Washer AssembliesTapping screw and washer assembliesPlain washers for screw and washer assembliesPlain washers for tapping screw and washer assembliesHexagon socket thin head cap screws with pilot recessHigh-strength hexagon head bolts with large widths across flats for structural steel boltingRound washers for high-strength structural steel boltingHexagon flange boltsHexagon flange bolts with reduced shankHexagon nuts with flange
Prevailing torque type hexagon nuts with nonmetallic insert
Prevailing torque type all-metal hexagon nuts
Prevailing torque type hexagon nuts with flange and with non-metallic insert
Prevailing torque type all-metal nuts with flange
TITLE
Pan head screws with type H or type Z cross recess - product grade ASaw blades for web saws
Break mandrel blind rivetsSpiral Pins; Normal TypeSpiral Pins; Heavy Duty TypeSpring-Type Straight Pins; (Roll Pins) Light-weight TypePlain Washers for Bolts with Heavy Clamping SleevesThread rolling screws for metric ISO thread - Part 1: Types, designation, requirementsThread rolling screws for ISO metric thread; guideline values for hole diameters
Self-drilling screws with tapping screw thread - Dimensions, requirements and testingHexagon head and slotted head thread cutting screws - Dimensions, requirements and testingCross recessed head thread cutting screws - Dimensions, requirements and testingRing seals and gasketsDiving accessories for skin divers; terminologyDiving accessories for skin divers; flippers. dimensions. requirements and testingDiving accessories for skin divers; diver"s masks. requirements and testingCross recesses for screws; (modified version of ISO 4757)Threads and thread ends for tapping screws (modified version of ISO 1478)Slotted pan head tapping screwsSlotted countersunk head tapping screwsSlotted raised countersunk head tapping screwsTaper Pins with Thread Ends and Constant Point LengthsTaper Pins with Internal Thread
Parallel Pins with Internal ThreadSpring lock washers with square ends for cheese head screwsCross recessed pan head tapping screwsCross recessed countersunk head tapping screwsCountersunk (Flat) Head Tapping Screws with Cross RecessHexagon socket thin head cap screwsCross recessed raised cheese head screwsWashers for steel structures - Product grade CWashers for steel structures - Product grade AHexagon socket countersunk head cap screws
TITLE
Polyethylene (PE) pipes – DimensionsPolyethylene (PE) pipes - PE 63, PE 80, PE 100, PE-HD - General quality requirements, testingPolypropylene (PP-R) Pipes -PN 20, PN25 PP-R - General quality requirements, testingBrazing and Braze Weld Filler Metals; Copper Base Brazing Alloys; Composition, Use, Technical Conditions of DeliveryBrazing and Braze Weld Filler Metals; Silver-bearing Brazing Alloys with less than 20% by wt. Silver; Composition, Use, Technical Conditions of DeliveryBrazing filler metals; silver brazing filler metals containing not less than 20% of silver; composition, application, technical delivery conditionsBrazing and Braze Weld Filler Metals; Aluminium-Base Brazing Alloys; Composition, Use, Technical Conditions of DeliveryBrazing filler metals; Nickel base filler metals for high temperature brazing; Application, composition, technical delivery conditionsManufacturing processes - Terms and definitions, divisionNarrow band saw blades for woodworking; dimensions
TITLE
Plain washers with large outside diameter
TITLE
TITLE
Tubes for the food, chemical and pharmaceutical industry - Stainless steel tubes - Dimensions, materials
TITLE
Laboratory furniture; safety cabinets for microbiological and biotechnological work; safety requirements, testsLaboratory furniture; safety cabinets for microbiological and biotechnological work; containment of class 1 and class 2 cabinets, microbiological testLaboratory furniture; safety cabinets for microbiological and biotechnological work; requirements and testingThermal solar systems and components - Solar collectors - Part 1: General requirementsThermal solar systems and components - Solar collectors - Part 2: Test methodsThermal solar systems and components - Factory made systems - Part 1: General requirementsThermal solar systems and components - Factory made systems - Part 2: Test methods
TITLE
Division of hospitals into functional areas and functional sections
Supply systems for medical gases - Part 2: Dimensions and allocation of probes and gas-specific connection points for terminal units for compressed medical gases and vacuumPackaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packagingWorkpiece corners and edges
TITLE
Areas for the fire brigade on premisesFire precaution regulation - Part 1: General and part A (placard); rules for drafting and placardingFire precaution regulation - Part 2: Part B (for persons without special tasks of fire prevention and fire fighting); rules for draftingFire precaution regulation - Part 3: Part C (for persons with special tasks of fire prevention and fire fighting); rules for draftingWater pool for firefightingUltrasonic domestic gas metersPortable fire extinguishers - Part 4: MaintenanceTrailers for firefighting purposes, two-wheeled; general requirementsFirefighting and rescue service vehicles - Vehicles for roller containers - General requirementsRescue service vehicles - Vehicles for roller containers - General requirementsTrailers for portable fire pumps
Food hygiene - Lamps for the lightingof meat and meat products
Firefighting - Trailer with removable foam-water monitorFire fighting vehicles - Part 5: Group pumping appliance LF 10/6, Group pumping appliance for rescue operations HLF 10/6Fire fighting vehicles - Part 11: Group pumping appliance LF 20/16, Group pumping appliance for rescue operations HLF 20/16Fire fighting vehicles - Part 16: Pumping appliance TSFFire fighting vehicles - Part 17: Pumping appliance TSF-WFire fighting vehicles - Part 21: Pump water tanker TLF 20/40, Pump water tanker TLF 20/40-SLFire fighting vehicles - Part 22: TLF 16/24-TRFire fighting vehicles - Part 24: Small pumping appliance KLFFire fighting vehicles - Part 25: Pumping appliance STLF 10/6Vehicles carrying tools and gears - Part 1: General requirementsVehicles carrying tools and gears - Part 3: Emergency tender RWVehicles carrying tools and gears - Part 12: Damage control tender GW-GVehicles carrying tools and gears - Part 21: GW-L1 for logistic tasksVehicles carrying tools and gears - Part 22: GW-L2 for logistic tasksFire hose tender; Type SW 2000-TRTurntable ladders and similar fire fighting vehicles; Purpose, concepts, safety equipment, requirementsTurntable ladders and similar fire fighting vehicles; Turn table ladders, engine drivenTurntable ladders and similar fire fighting vehicles; Rescue basketsTurntable ladder DL 16-4, hand operatingTrailer Ladder AL 16-4Hook ladder, manufactured using wood; with hinged hookHook light metal ladderScaling ladder; made from woodScaling ladder; made from light metalScaling ladder; socket rungs and socket partsFolding ladderThree piece extension ladder made from woodThree piece extension ladder; made of light metal
TITLE
Cranes; steel structures; principles of design and constructionWarehouse systems with guided industrial trucks; requirements on the ground, the warehouse and other requirementsWarehousesystems with powered industrials trucks; code of practice for the protection of persons when operating with trucks in narrow aisles; safety requirements, testing
TITLE
Classification of types
TITLE
Seamless Tubes of heat Resistant Steels
Film 70 mm; projection reel
Cross-linked high-densitypolyethylene (PE-X) pipes - General quality requirements and testingCross-linked high-densitypolyethylene (PE-X) pipes – Dimensions
Steels For Quenching And Tempering - Technical Delivery ConditionsHeat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality SpecificationsMaterials for permanent magnets: Technical conditions
Resistance alloys
TITLE
House service connections facilities - Principles for planningRecesses for meter boards (electric meters)Foundation earth electrode - General planning criteriaElectrical installations in residential buildings - Part 1: Planning principlesElectrical installations in residential buildings - Part 2: Nature and extent of minimum equipmentElectrical installations in residential buildings - Part 3: Wiring and disposition of electrical equipmentDomestic kitchens, bathrooms and WCs; design principlesBarrier-free built environment - Part 1: Streets, squares, paths, public transport, recreation areas and playgrounds - Design principlesConstruction of accessible buildings - Part 2: Publicly accessible buildings and workplaces, design principlesStairs in buildings - Terminology, measuring rules, main dimensionsConstruction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of air conditioning systems
Steel structures - Part 1: Design and constructionSteel structures - Part 2: Analysis of safety against buckling of linear members and framesSteel structures - Part 3: Analysis of safety against buckling of platesSteel structures - Part 4: Analysis of safety against buckling of shellsSteel structures - Part 5: Composite structures of steel and concrete - Design and constructionSteel structures - Part 7: Execution and constructor's qualification
TITLE
Control technology – TerminologyMeasurement and control; terminology and classification of controllersControl technology - Part 1: General terms and definitionsControl technology - Part 2: Terms and definitions; dynamic systems behaviourControl technology - Part 3: Terms and definitions of switching systems behaviourControl technology - Part 4: Terms and definitions of control systemsControl technology - Part 5: Functional termsControl technology - Part 6: Terms and definitions of functional and constructional unitsControl technology; graphical symbols and identifying letters for process control engineering; symbolic representation for functionsControl technology; graphical symbols and identifying letters for process control engineering; representation of details
Measurement and control; control engineering vocabulary
Contract procedures for building works - Part C: General technical specifications for building works; Low-voltage installation and medium-voltage installation with nominal voltages up to including 36 kVConstruction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Installation oflightning protection systems
Control technology; graphical symbols and identifying letters for process control engineering; symbolic representation for functionsControl technology; graphical symbols and identifying letters for process control engineering; representation of details
Pipe-lines of high-density PE (high-density polyethylene) and low-density PE (low density polyethylene) for drinking water supply; pipes, pipe connections and fittings for pipe-linesHydraulic steel structures - Part 1: Criteria for design and calculationHydraulic steel structures - Part 2: Design and manufacturingHydraulic steel structures - Part 3: Electrical equipment
TITLE
Explosives work
Mining crevice work; colours
Rollers: dimensions, specifications, testing
Clothing for the mining industry – men's vest with 1/4 sleevesClothing for the mining industry – men's underpants 1/1 length (Long Johns)
TITLE
TITLE
Ductile iron pressure pipes with socket with cement-mortar lining for gas and water pipelines; dimensions and massesDuctile iron pressure pipes with socket for gas and water pipelines rated for pressures over 4 bar up to and including 16 bar; dimensions and masses
TITLE
Roller contact tipper vehicles, roller containers - Part 1: Roller contact tipper vehicles up to 26 t, roller containers type 1570 made from steelRoller contact tipper vehicles, roller containers - Part 2: Roller contact tipper vehicles up to 32 t, roller containers type 1570 made from steelRoller contact tipper vehicles, roller containers - Part 3: Roller contact tipper vehicles up to 12 t, roller containers type 900 made from steel
Conveyor belt for bulk material, fundamentals, analysis and designArrangements for belt conveyorrollers
Seat leathers for the mining industry (miner's apron)
Ventilation and air conditioning - folded and welded rectangular sheet metal ductsCentralised lubrication systems - Concepts - Part 1: ClassificationLubricationHydraulic valves; mounting surfaces and connecting plates for directionalcontrol valves
Roller containers for the transport on road and rail
Frequency and wave bandsGuidelines for the user interface in multimedia equipment for general purpose use (IEC/TR 61997:2001)Road vehicles; degrees of protection (IP-code); protection against foreign objects; water and contact; electrical equipmentGraphical symbols for use on equipmentGraphical symbols for use on equipment; graphical symbols from ISO 7000 for electrical engineeringElectric power technology - Current systems - Concepts, quantities, letter symbolsQuantities used in alternating current theory - Part 2: Two-line circuitsQuantities used in alternating current theory - Part 2: Multi-line circuitsTelecommunications - Part 1: Basic conceptsTransmission systems and two-ports; concepts and quantitiesTransmission systems and two-ports; symmetry characteristics of linear two-portsTransmission systems and two-ports; measures for attenuationNominal value, limiting value, rated value, rating - conceptsElectrical communication engineering; electromagnetic relays, definitionsElectro Sheets; Magnetic Materials for TransformersSmall transformers and chokes; strip-wound cut cores; types SM, SE, SU, SG and S3U; dimensions materialsSmall transformers and chokes; strip-wound cut cores; technical conditions of delivery for one phase applications; types SM, SE, SU and SGSmall transformers and chokes; strip-wound cut cores; technical conditions of delivery for three phase applications; type S3UNominal values of resistors and capacitorsColour code for fixed resistorsCircular connectors for radio and associated sound equipment three and five-pole connectors
Two-part connectors for printed boards; grid 2,54mm; dimensions of types B, C and DTwo part connectors for printed boards; grid 2,54mm; dimensions of types F and GTwo-part connectors for printed boards; grid 2,54mm, dimensions of type HTwo-part connectors for printed boards; grid 2,54mm; ratings, requirements, testsTwo-part connection for printed boards; grid 2.54mm; dimensions of types Q, R and S
Two-part connectors for printed boards; grid 2,54mm; gaugesTwo-part connectors for printed boards; dimensions for type XTwo-part connectors for printed boards; dimensions of type M
Rack and panel connectors, trapezoidal, round contacts ø1 mm; common mounting features and dimensions; survey of typesRack and panel connectors, trapezoidal, round contacts ø1 mm; ratings, requirements, testsRack and panel connectors, trapezoidal, round contacts ø1 mm; dimensions of type A; solder termination for free wiringRack and panel connectors, trapezoidal, round contacts ø1 mm; dimensions of type C; crimp termination for free wiringGuidelines for the presentation of published dataThyristors, definitions
Conversion of the Arabic alphabet
Two-part connectors for printed board, grid 2,54 mm; common mounting features; survey of typesTwo piece connectors for printed circuits, grid 2,54 mm (0,1 in); general allusions
Two-part connectors for printed boards; grid 2,54 mm; dimensions of types U and VTwo-part connectors for printed boards; grid 2.54 mm; dimensions of type MTwo-part connectors for printed boards; grid 2.54 mm; dimensions of type M; survey of special contracts for use with type MTwo-part connectors for printed boards; grid 2,54 mm; dimensions of type E
Rack and panel connectors, trapezoidal, round contacts 1 mm; common mounting features and dimensions; survey of typesRack and panel connectors; trapezoidal, round contacts 1 mm; ratings, requirements, tests
Semiconductor devices and integrated circuits; kinds of devices and general termsSemiconductor devices and integrated circuits; optoelectronic semiconductor devices; terms and definitionsCases 10 A 3 and 10 B 3 for semiconductor devices; main dimensionsCase 23 A 3 for semiconductor devices; main dimensionsCases 34 A 2 and 34 A 3 for semiconductor devices; main dimensionsCase 11 A 3 and 11 B 3 for semiconductor devices; main dimensionsCase 12 A 3 for semiconductor devices; main dimensionsCase 13 A 3 for semiconductor devices; main dimensionsCase 14 A 3 for semiconductor devices; main dimensionsCase type 15 for semiconductor devices; main dimensionsCases type 5 for semiconductor devices and integrated circuitsCases 18 A, B and C with 2 up to 4 terminals for semiconductor devices; main dimensionsTerminal markings for electrical equipment; general rules, alphanumeric systemTerminal markings for power transformers and reactorsTerminal markings for power convertersTotally enclosed fan-cooled three-phase induction motors squirrel-cage, type IM B 3, with rolling bearing; mounting dimensions and relationship frame sizes-output ratings
Totally enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B3, with ball bearings, maximum envelope dimensionsRating plates for rotating electrical machinery; designRated output values for rotating electrical machinery for continuous dutyMeasurement and control - Measurement and control instruments for panel mounting - Nominal front- and cut-out-dimensionsElectrical measuring instruments; direct acting indicating electrical measuring instruments and their accessoriesLine scales and pointers for indicating electrical measuring instruments; general requirementsLine scales and pointers for indicating electrical measuring instruments; designs and dimensionsLine scales and pointers for indicating electrical measuring instruments; scale graduation and numbering
Electricity meters, tariff time switches and ripple control receivers; connection diagrams, terminal marking, circuit diagramsElectricity meters - Part 2: Marking of auxiliary terminals for tariff devices according to IEC-Report 61354:1995Meter mounting boards; dimensions based on a grid systemMeter mounting boards; functional areaMeter panels; wiringsMeter mounting boards; dimensions based on a grid systemMeter mounting boards; functional areaMeter panels; wiringsMeter panels; cover for wiringThermistors; PTC, technical terms and testsInformation processing; vocabularyInformation processing - Concepts - General termsInformation processing - Concepts - Representation of dataInformation processing - Concepts - Data structuresInformation processing - Concepts – ProgrammingInformation processing - Concepts - Components of digital computer systemsInformation processing - Concepts – StorageInformation processing - Concepts – TimesInformation processing - Concepts - Processing functionsInformation processing - Concepts - Process relations and modes of operationCircular connectors for radio and associated sound equipment; six-pole connectors
Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"
Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"
Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring transducers for the measurement of power and power factor
Connectors for coupling an external low-voltage power to portable entertainment equipment (describes at least two DC coaxial power plugs)High fidelity audio equipment and systems; minimum performance requirements; Part 1: generalHigh fidelity audio equipment and systems; requirements for tuner equipmentsHigh fidelity audio equipment and systems; requirements for disk record reproducing equipmentsHigh fidelity audio equipment and systems; minimum performance requirements for magnetic recording and reproducing equipmentHigh fidelity audio equipment and systems; minimum performance requirements for microphonesHigh fidelity audio equipment and systems; minimum performance requirements for amplifiersHigh fidelity audio equipment and systems; requirements for loudspeakersHigh fidelity audio equipment and systems; for sets and systemsHigh fidelity audio equipment and systems; minimum performance requirements for headphonesMeasuring apparatus for frequency variations in sound recording equipment
Microphones; phantom powering
Grain-oriented magnetic steel and strip technical conditionsCords for telecommunication; code of insulated conductors, colour of sheathTerms of HF-linesTerms of HF-linesDefinition of radio frequency transmission lines - mean characteristic impedance - mean standing wave ratioLightning protection system; Arrangement of components and dimensions for mountingLightning protection system; Description
TITLE
Testing of floor coverings; determination of the anti-slip properties: workrooms and fields of activities with slip danger, walking method - ramp testLubricants; Lubricating Oils L-AN; Minimum RequirementsTesting of particleboards; determination of formaldehyde emission by gas analysisPaints and varnishes - Determination of the drying stage of coatings (modified Bandow-Wolff method)Testing of combustible materials; response to ignition by small flameTesting of Plastics; Flexural TestFlexible Cellular Polymeric Materials - Determination of Tear StrengthTesting of combustible materials; determination of ignition temperatureDetermination of burning behaviour using a gas burnerMachine tools; symbols; numerically controlled machine toolsSurgical implants; threads for bone screws and nutsThread connection for microscope objectives
TITLE
Information processing; switching algebra, mathematical signs and symbolsInformation processing; graphical symbols and their applicationInformation processing; handwriting of the digit 0 and of the upper case letter OInformation technology - 7-bit codeInformation processing - Coding on data media - Part 1: Representation of 7-bit code character sets on punched tape 25
Disk record reproducing equipment; directives for measurements, markings and audio frequency connections, dimensions of interchangeable pickups, requirements of play back amplifiers
Steel flats with special magnetic properties cold rolled, non - oriented, finally annealed magnetic sheet and strip hysteresis loss at frequencies above 100 Hz
Information processing - Coding on data media - Part 2: Representation of 7-bit coded and 8-bit coded character sets on punched cardsInformation processing - Coding on data media - Part 3: Representation of 7-bit coded and 8-bit coded character sets on magnetic tape 12Information processing - Coding on data media - Part 4: Representation of 7-bit coded and 8-bit coded character sets on magnetic tape cassette 3,8Information processing - Coding on data media - Part 5: Representation of 7-bit coded and 8-bit coded set on media-flexible disk cartridgeInformation processing; representation of packed numerics and binary data recorded on 9 tracks on magnetic tape 12
Font A for optical character recognition; characters and nominal dimensionsFont A for optical character recognition; characters and nominal dimensions; extension of the character setFont A for optical character recognition; representation of characters by dots in a 9 × 9 matrixFont B for optical character recognition; characterFunctional requirements for the interface between data terminal equipment and data circuit-terminating equipment - Part 1: General applicationList of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) in public data networksData transmission; interface between data circuit-terminating equipment (DCE) and data terminal equipment (DTE)Interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for synchronous transmission on group band circuits at 48000 bits per secondData transmission; interface between data circuit-terminating equipment (DCE) and data terminal equipment (DTE)Interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for synchronous transmission on group band circuits at 48000 bits per secondNumerical control of machines, format; general requirementsIndustrial automation; numerical control of machines; format, preparatory and miscellaneous functions
Programming of numerically controlled machines; CLDATA, general structure and record typesProgramming of numerically controlled machines; CLDATA; minor elements of type 2000 records (post-processor commands)
Numerical control of machines; conceptsInterfaces and basic data link control procedures for data communication; C S-interface, V S-interface
Information processing; Nassi-Shneiderman flowchart symbolsIndustrial automation systems and integration - Multiprocessor Control System for Industrial Machines (MPST) - Part 1: Parallel busMultiprocessor control system for industrial machines (MPST); industrial automatics; rules for information interchangeInformation technology - 8 bit codeIndustrial automation; Computer Aided Design; format for the exchange of standard parts dataLocal and Metropolitan Area Networks; LLC; identical with ISO 8802-2:1989Local and Metropolitan Area Networks; token-passing bus access method; identical with ISO/IEC 8802-4:1990Three-part standard regarding the seven security levels of paper shredders; replaces DIN 32757Project controlling; project management; concepts
TITLE
Lubricating nipples; cone typeLead storage batteries; starter batteries for motorcycles, nominal capacities, main dimensionsLead storage batteries; starter batteries, terminals, vent plugs and filler openingsLead storage batteries; starter batteries for motor cycles and passenger carsLead storage batteries; starter batteries for starting, lighting and ignition, 12 V, 27, 36, 45 and 54 Ah, for lateral basic fastening 10,5Lead storage batteries; starter batteries for starting, lighting and ignition, 12 V, 27, 36, 45, 54 and 63 Ah, for lateral basic fastening 19Lead storage batteries; starter batteries, protective covering for terminal
Presentation of ALGOL/ALCORprograms on paper tape and punch cardsFont CMC 7 for magnetic ink character recognition; characters and nominal dimensions
Information processing; programming language FORTRAN
Information processing; programming language PEARLInformation processing; programming language PL/IInformation processing; programming language PL/IInformation processing; programming language Pascal
Interface and basic data link control procedures for data communication; balanced interface for start-stop transmission using basic data link control procedures on point-to-point connection
Lead storage batteries; starter batteries with basic fastening 10,5 for passenger cars and commercial vehicles; nominal capacities, main dimensionsLead storage batteries; starter batteries for commercial vehicles; nominal capacities and main dimensionsLead storage batteries; starter batteries with 10,5 basic fastening lugs for commercial vehicles; nominal capacities and main dimensions
Radio communication devices in motor vehicles; installation space, general requirements
Terminal markings for motor vehicles; scope, principles, requirementsTerminal markings for motor vehicles; codesTerminal markings for motor vehicles; examples for application on circuit diagramsTerminal markings for motor vehicles; summary
DIN EN ISO 2320,DIN EN ISO 3506-1,DIN EN ISO 3506-2,DIN EN ISO 3506-3DIN EN 28839DIN EN ISO 26157-1,DIN EN ISO 26157-3DIN EN ISO 6157-2,DIN EN ISO 10484,DIN EN ISO 10485DIN EN ISO 6157-2,DIN EN ISO 10484,DIN EN ISO 10485DIN EN ISO 898-6
DIN EN 1665DIN EN 1665DIN EN 1661DIN EN ISO 7040,DIN EN ISO 10512DIN EN ISO 7042,DIN EN ISO 10513
DIN EN 1663, DIN EN 1666
DIN EN 1664, DIN EN 1667
DIN EN ISO 14589, DIN EN ISO 15977, DIN EN ISO 15978, DIN EN ISO 15979, DIN EN ISO 15980, DIN EN ISO 15981, DIN EN ISO 15982, DIN EN ISO 15983, DIN EN ISO 15984, DIN EN ISO 16582, DIN EN ISO 16583, DIN EN ISO 16584DIN EN ISO 8750DIN EN ISO 8748DIN EN ISO 13337
DIN 41612-1 S1DIN EN 60603-2DIN EN 60603-2DIN EN 60603-2DIN EN 60603-2DIN EN 60603-2DIN EN 60603-2DIN EN 60603-2DIN EN 60603-2DIN EN 60603-2DIN EN 60603-2DIN EN 60603-2DIN 41612-9DIN 41612-8
EN 1665EN 1665EN 1661ISO 7040,ISO 10512ISO 7042,ISO 10513
ISO 7043 (modified), ISO 12125(modified)ISO 7044 (modified),ISO 12126 (modified)
ISO 14589, ISO 15977, ISO 15978, ISO 15979, ISO 15980,ISO 15981, ISO 15982, ISO 15983, ISO 15984, ISO 16582,ISO 16583, ISO 16584ISO 8750ISO 8748ISO 13337
