e p i l o g l a s e r . c o m • 8 8 8 - 4 3 7 - 4 5 6 4

Discover more about the Fusion FiberMark Laser: visit us online at www.epiloglaser.com or call 888-437-4564

It will change what you expect from a laser.

Maximum Engraving Area: 32" x 20" (813 x 508 mm)

Maximum Material Thickness: 13.25" (336 mm)

Laser Tube Wattages: 10, 20, 30, 50 watts

Intelligent Memory Buffer: Store unlimited files up to 64 MB. Rolling buffer allows files of any size to be engraved.

Operating Modes: Raster, Vector and Combined Modes

Motion Control System: Industrial brushless DC servo motors.

X-Axis Bearings: Long Lasting Teflon coated bearings.

Belts: Kevlar (x-axis) and Steel Cord (y-axis) belts.

Resolution: User controlled from 75 to 1200 dpi.

Optics: Radiance™ High Definition Optics

Speed and Power Control: Computer or manually controlled speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus settings to any RGB color.

Print Interface: 10 Base T Ethernet or USB connection.

Size: 52.5" wide x 33.5" deep x 40.75" tall (1334 x 851 x 1035 mm). 34.5" (876 mm) deep with exhaust plenum.

Weight: 500 lbs (227 kg)

Electrical Requirements: Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC.

Ventilation External exhaust to the outside is required. There are two output ports, 4" in diameter.

Technical specifications and product configurations subject to change without notice.

THE SPECS

The smoothest, most accurate motion control system we’ve ever developed.

JOB MANAGEMENT SOFTWAREJob time estimator and recorder and interactive positioning features

PREMIER MOTION CONTROL

ADVANCED VECTOR MARKING CAPABILITIES

Larger work area provides ability to mark larger or an increased number of parts.

Provides the highest speed vector marks with a flying-optic laser marking system.

FIBER LASER WATTAGES TO MEET YOUR NEEDSAvailable in wattage configurations of 10, 20, 30, and 50 watts.

INCREASED WORK AREA SIZE: 32" X 20"

JOB MANAGEMENT SOFTWAREJob time estimator / recorder and interactive positioning features.

JOYSTICK CONTROLUse the Control Panel Joystick to control many of the laser’s functions.

THICK STEEL CORD AND KEVLAR BELTSPrecision drive belts with Kevlar on the x-axis and steel cord on the y-axis.

DROP-DOWN FRONT DOORDesigned for easy movement of parts in and out of the system.

LARGE, INDUSTRIAL BRUSHLESS DC SERVO MOTORSFeatured on both x- and y-axis, the most robust motors available.

SUPERIOR CHASSIS STRENGTH10x more rigid than any other system we build.