of 50
7/27/2019 Disassembly Notebo 201151025454
1/50
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available atEL-MF877-01
Product End-of-Life Disassembly InstructionsProduct Category: Notebooks and Tablet PCs
Marketing Name / Model[List multiple models if applicable.]
HP ProBook 4730s Notebook PC
Name / Model #2
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructionsfor the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EUdirective 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0Items Requiring Selective Treatment1.1 Items listed below are classified as requiring selective treatment.1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, asapplicable.
Item Descrip tion Notes
Quantityof itemsincludedin product
Printed Circuit Boards (PCB) or Printed CircuitAssemblies (PCA)
With a surface greater than 10 sq cm 2
Batteries All types including standard alkaline and lithium coinor button style batteries
2
Mercury-containing components For example, mercury in lamps, display backlights,scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greaterthan 100 sq cm
Includes background illuminated displays with gasdischarge lamps
1
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuringgreater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardantsweighing > 25 grams (not including PCBs or PCAsalready listed as a separate item above)
Components and parts containing toner and ink,including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, ventchambers, and service stations.
Components and waste containing asbestos
http://standards.corp.hp.com/elclass/AMF87701.htmhttp://standards.corp.hp.com/elclass/AMF87701.htmhttp://standards.corp.hp.com/elclass/AMF87701.htmhttp://standards.corp.hp.com/elclass/AMF87701.htm7/27/2019 Disassembly Notebo 201151025454
2/50
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available atEL-MF877-01
Components, parts and materials containingrefractory ceramic fibers
Components, parts and materials containingradioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.Tool Descript ion Tool Size (if
applicable)
Description #1 Motor-screw-driver +
Description #2 Motor-screw-driver *
Description #3 Motor-screw-driver -
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Follow steps described in Disassembly instruction (file attached).2. If parts can be removed without using a tool, remove it first.3. Use correct screwdriver and torque value before unlock the screw4.5.6.7.8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the itemscontained in the product that require selective treatment (with descriptions and arrows identifying locations).
http://standards.corp.hp.com/elclass/AMF87701.htmhttp://standards.corp.hp.com/elclass/AMF87701.htmhttp://standards.corp.hp.com/elclass/AMF87701.htmhttp://standards.corp.hp.com/elclass/AMF87701.htm7/27/2019 Disassembly Notebo 201151025454
3/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble Battery
1. Take out Battery. (Fig.1)
1(1/1)
1.00 2011/04/07
Fig.1
7/27/2019 Disassembly Notebo 201151025454
4/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
. Disassemble bottom cover
2(1/1)
1.00 2011/04/07
1. Push the latch, loosen the bottom cover. (Fig.1)
2. Take out the bottom cover from BTCB. (Fig.2)
Fig.1
Fig.2
7/27/2019 Disassembly Notebo 201151025454
5/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Remove master label
3(1/1)
1.00 2011/04/07
1. Rip the master label from BTCB. (Fig.1)
Fig.1
7/27/2019 Disassembly Notebo 201151025454
6/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
4(1/1)
Electric cross screw driver #1 1
1.00 2011/04/07Loosen screw
1. Loosen ODD screw *1, and loosen K/B
screw *2. (Fig.1)
1
Fig.1
23
7/27/2019 Disassembly Notebo 201151025454
7/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
5(1/1)
1.00 2011/04/07Disassemble ODD
1. Take out ODD. (Fig.1)
Fig.1
7/27/2019 Disassembly Notebo 201151025454
8/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble DDR
1. Take out the DDR from BTCB. (Fig.1)
6(1/1)
1.00 2011/04/07
Fig.1
7/27/2019 Disassembly Notebo 201151025454
9/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Loosen HDD screw
1. Loosen screw *4. (Fig.1)
7(1/1)
1.00 2011/04/07
Electric cross screw driver #1 1
2
3
4
1
Fig.1
7/27/2019 Disassembly Notebo 201151025454
10/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble HDD
1. Take out the HDD from BTCB.
8(1/1)
1.00 2011/04/07
7/27/2019 Disassembly Notebo 201151025454
11/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble WLAN antenna cable
1. Take out the WLAN cable from routing
through. (Fig.1)
9(1/1)
1.00 2011/04/07
Routing stick 1
Fig.1
7/27/2019 Disassembly Notebo 201151025454
12/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble antenna cable
1. Disassemble WLAN antenna cable from
WLAN card.
10(1/1)
1.00 2011/04/07
21
Fig.1
Routing stick 1
7/27/2019 Disassembly Notebo 201151025454
13/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble WLAN card & loosen screw
1. Loosen screw *2. (Fig.1)
2. Take out the WLAN from M/B. (Fig.2)
11(1/1)
1.00 2011/04/07
Electric cross screw driver #1 1
WLAN
2
1
Fig.1
Fig.2
7/27/2019 Disassembly Notebo 201151025454
14/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Loosen BTCB screw
1. Loosen BTCB screw *4.
12(1/1)
1.00 2011/04/07
Electric cross screw driver #1 1
1
2
3
4
7/27/2019 Disassembly Notebo 201151025454
15/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Loosen BTCB screw
1. Loosen BTCB screw *4.
13(1/1)
1.00 2011/04/07
Electric cross screw driver #1 1
1
2 43
7/27/2019 Disassembly Notebo 201151025454
16/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Loosen BTCB screw
1. Loosen BTCB screw *3.
14(1/1)
1.00 2011/04/07
Electric plum blossom screw driver 1
1
2
3
7/27/2019 Disassembly Notebo 201151025454
17/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Loosen BTCB screw
1. Loosen BTCB screw *4.
15(1/1)
1.00 2011/04/07
Electric plum blossom screw driver 1
1 23
4
7/27/2019 Disassembly Notebo 201151025454
18/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
16(1/1)
1.00 2011/04/07
1. Loosen BTCB screw *4.
Loosen BTCB screw
Electric plum blossom screw driver 1
1
3
42
7/27/2019 Disassembly Notebo 201151025454
19/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
17(1/1)
1.00 2011/04/07
1. Loosen BTCB screw *4.
Loosen BTCB screw
Electric plum blossom screw driver 1
4
1
2
3
7/27/2019 Disassembly Notebo 201151025454
20/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble K/B
1. Disassemble K/B from TPCB.
18(1/1)
1.00 2011/04/07
Fig.1
7/27/2019 Disassembly Notebo 201151025454
21/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Pull out K/B FFC
1. Pull out K/B FFC from M/B (through the
broken hole of TPCB).
19(1/1)
1.00 2011/04/07
K/B FFC
7/27/2019 Disassembly Notebo 201151025454
22/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Pull out FFC
1. Pull out Power button/B FFC from M/B
CNTR. (Fig.1)
2.Pull out Finger/B FFC from M/B CNTR.
(Fig.2)
20(1/2)
1.00 2011/04/07
Fig.2Fig.1
7/27/2019 Disassembly Notebo 201151025454
23/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Pull out FFC from M/B
1. Pull out Speaker cable from M/B CNTR.
(Fig.1)
2. Pull out Launch/B FFC from M/B CNTR.
(Fig.1)
20(2/2)
1.00 2011/04/07
Fig.1
7/27/2019 Disassembly Notebo 201151025454
24/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
1. Loosen screw *3. (Fig.1/Fig.2)
Loosen TPCB & BTCB screw
21(1/1)
1.00 2011/04/07
Fig.2
Electric plum blossom screw driver 1
1
2
3
Fig.1
7/27/2019 Disassembly Notebo 201151025454
25/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble TPCB
1. Disassemble TPCB from the base.
22(1/1)
1.00 2011/04/07
Fig.1
7/27/2019 Disassembly Notebo 201151025454
26/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble TPCB & Pull out FFC
1. Take out the TPCB, and then put it in the
kitting box. (Fig.1)
2. Pull out Card reader FFC from M/B. (Fig.2)
23(1/1)
1.00 2011/04/07
Fig.1
Card reader/B FFC
Fig.2
7/27/2019 Disassembly Notebo 201151025454
27/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
1. Take out the WLAN cable from routing
through. (Fig.1/2/3)
2. Disassemble WLAN cable. (Fig.1/2/3)
Disassemble WLAN cable
24(1/1)
1.00 2011/04/07
Fig.1
Fig.3
Routing through
Fig.2
7/27/2019 Disassembly Notebo 201151025454
28/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble LCM cable
1. Disassemble LCM cable. (Fig.1/2)
25(1/1)
1.00 2011/04/07
LCM CNTR
Fig.1
Routing stick 1
Fig.2
7/27/2019 Disassembly Notebo 201151025454
29/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble Camera cable
1. Disassemble Camera cable.
26(1/1)
1.00 2011/04/07
Camera CNTR
7/27/2019 Disassembly Notebo 201151025454
30/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
1. Loosen screw *2. (Fig.1/Fig.2)
Disassemble LCM ground wire
27(1/1)
1.00 2011/04/07
Electric plum blossom screw driver 1
2
1
Fig.3
Fig.1
Fig.2
7/27/2019 Disassembly Notebo 201151025454
31/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
1. Loosen screw *2. (Fig.2)
2. Take out the LCM. (Fig.1)
Disassemble LCM
28(1/1)
1.00 2011/04/07
Fig.2
Electric plum blossom screw driver 1
Fig.1
12
7/27/2019 Disassembly Notebo 201151025454
32/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
1. Pull out ODD/B FFC from M/B CNTR. (Fig.1)
2. Take out the ODD/B. (Fig.2)
Disassemble ODD/B
29(1/1)
1.00 2011/04/07
Fig.2
ODD/B
Hook
Routing through
Fig.1
7/27/2019 Disassembly Notebo 201151025454
33/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Fig.1
1. Open USB/B FFC CNTR cover.
2. Pull out USB/B FFC from M/B CNTR. (Fig.1)
Pull out USB/B FFC
30(1/1)
1.00 2011/04/07
7/27/2019 Disassembly Notebo 201151025454
34/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
1. Loosen screw *2 (Fig.1), and then take out
the USB/B.
Disassemble USB/B
31(1/1)
1.00 2011/04/07
Fig.1
Electric cross screw driver #1 1
Fig.2
1
2
7/27/2019 Disassembly Notebo 201151025454
35/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
1.00 2011/04/07
[With Modem]:
1. Remove tape *1, and disassemble RJ11
cable. (Fig.1)
[W/O Modem]:
No this operation.
32(1/1)
1.00 2011/04/07Disassemble RJ11 cable
Fig.1
Hook
7/27/2019 Disassembly Notebo 201151025454
36/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
33(1/1)
1.00 2011/04/07
[With Modem]:
1. Pull out the RJ11 from HDD Ext. board.
(Fig.2)
[W/O Modem]:
1. Disassemble RJII dummy cover. (Fig.1)
Disassemble RJ11 cable
Fig.1
Hook
Fig.2
7/27/2019 Disassembly Notebo 201151025454
37/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
With Modem:
1. Loosen screw *2. (Fig.1)
2. Take out the Modem from M/B CNTR.
Disassemble Modem module
34(1/1)
1.00 2011/04/07
Fig.1
1
2
Electric cross screw driver #1 1
7/27/2019 Disassembly Notebo 201151025454
38/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
1. Remove the Mylar from the fan. (Fig.1)
2. Take out the Lid switch/B FFC from M/B
CNTR. (Fig.2)
3. Take out the Lid Switch/B.
Disassemble Lid Switch/B
35(1/1)
1.00 2011/04/07
Fig.1
Fig.2
7/27/2019 Disassembly Notebo 201151025454
39/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
1. Loosen screw *1. (Fig.1)
2. Loosen the DC-IN Jack from BTCB. (Fig.1)
Disassemble DC-IN Jack
36(1/1)
1.00 2011/04/07
Electric cross screw driver #1 1
Fig.1
7/27/2019 Disassembly Notebo 201151025454
40/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
37(1/1)
1.00 2011/04/07
1. Loosen M/B screw *3. (Fig.1 )
2. Loosen HDD Ext. board screw *2. (Fig.2 )
Loosen M/B screw
Electric plum blossom screw driver 1
Fig.2
Fig.1
21
3
7/27/2019 Disassembly Notebo 201151025454
41/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
38(1/1)
1.00 2011/04/07
1. Pull out DC-In cable from BTCB. (Fig.1)
2. Take out the M/B from BTCB. (Fig.2)
Disassemble M/B
Fig.2
Fig.1
7/27/2019 Disassembly Notebo 201151025454
42/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Loosen BATT cable screw
1. Loosen BATT cable screw * 2. (Fig.1)
39(1/1)
1.00 2011/04/07
Electric cross screw driver #1 1
1 2
Fig.1
7/27/2019 Disassembly Notebo 201151025454
43/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble SIM card Rubber
[W/O SIM card]:
1. Take out SIM card Rubber. (Fig.2)
* No iron bracket is no SIM card. (Fig.1)
[With SIM card]:
No this operation.
40(1/1)
1.00 2011/04/07
Fig.2
SIM card Rubber
Fig.1
7/27/2019 Disassembly Notebo 201151025454
44/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble Battery cable & HDD Ext./B
1. Put the M/B on the Support fixture. (B
side upward)
2. Pull out Battery cable from M/B. (Fig.1)
3.Take out the HDD Ext. board from M/B
(Fig.2)
4. Put the M/B on production line.
41(1/1)
1.00 2011/04/07
Fig.2Fig.1
Pull out Battery cable
Support fixture (M/B B side) 1
7/27/2019 Disassembly Notebo 201151025454
45/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble FAN & pull out FAN cable
1. Put the M/B on the Support fixture. (B side
upward) (Fig.1)
2. Take out the FAN from M/B. (Fig.2)
3. Loosen screw *1, pull out FAN cable from
CNTR. (Fig.3)
4. Put the M/B on production line.
42(1/1)
1.00 2011/04/07
Fig.2
Fig.1
Fig.3
Support fixture (M/B B side) 1
Electric cross screw driver #1 1
7/27/2019 Disassembly Notebo 201151025454
46/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble Thermal & loosen screw
1. Put the M/B on the Support fixture. (B side
upward) (Fig.1)
2. Loosen thermal screw.
* Discrete model screw *2. (Fig.1)
* UMA model doesnt have this operation.
3. Put the M/B on production line.
43(1/1)
1.00 2011/04/07
Support fixture (M/B B side) 1
Electric cross screw driver #1 1
Fig.1
1
2
7/27/2019 Disassembly Notebo 201151025454
47/50
7/27/2019 Disassembly Notebo 201151025454
48/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble DC-IN cable
1. Put M/B on the Support fixture.
(B side upward)
2. Pull out DC-IN cable from M/B. (Fig.1)
3. Put the M/B on production line.
45(1/1)
1.00 2011/04/07
Fig.1
Support fixture (M/B B side) 1
7/27/2019 Disassembly Notebo 201151025454
49/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator Issue departmentAlicia Chien NPI-SE
Disassemble CPU
1. Put the M/B on the Support fixture. (B side
upward)
2. Loosen CPU socket screw by using one-line
screw driver (counterclockwise), and then
take out the CPU from socket by using
suction pen, and put it in the kitting box.
3. For 45w CPU: Remove Mylar *1. (Fig.2)
4. Put the M/B on production line.
46(1/1)
1.00 2011/04/07
Support fixture (M/B B side) 1
One-line screw driver 1
Suction pen 1
Fig.2
Fig.1
35W CPU :W/O Mylar
45W CPU: With Mylar
7/27/2019 Disassembly Notebo 201151025454
50/50
Standard Operation Procedure
Document No. : SS11 Ramones-17 FA DIS-ASSY SOP Station :
Name : Ver. : Date :
Step
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
1. Pull out Modem module & cable from
Module CNTR. (Fig.1)
Pull out Modem
47(1/1)
1.00 2011/04/07
Fig.1