MANDATORY DISCLOSURES
MANDATORY DISCLOSURES
1.1 ENGINEERING/TECHNOLOGY/PHARMACY PROGRAMMESThe following information is to be given in the Information Brochure besides being hosted on the Institution's official
Website.
"The information has been provided by the concerned institution and the onus of authenticity lies with the institution and not on AICTE."
I. NAME OF THE INSTITUTION: RAMGARHIA POLYTERCHNIC COLLEGE R.E.C. Complex, PHAGWARA
Address including telephone, Fax, e-mail. ramgarhiapolytechnic.com
II. NAME & ADDRESS OF THE DIRECTOR/Principal : S. Jasbir Singh Khasaria Address including telephone, Fax, e-mail. 9815069925
III. NAME OF THE AFFILIATING BOARD. : PSBTE, Chandigarh
IV. GOVERNANCE : RAMGARHIA EDUCATIONAL COUNCIL PHAGWARA
1Signature of the Authorized Signatory of Society /Trust/Applicant with date
List of Executive Committee Members and their brief backgroundS.No. Name of the Members Address Position held
1. Mrs. Manpreet Kaur Bhogal Bhogal Mansion, GT Road, Phagwara President/Chairman2. S. Charanjeet Singh Saggo D-32, Defense Colony, Jaipur Plaza,
New Delhi Vice President
3. Smt Prabhjot Kaur Sagoo B-260/A,3rd Floor, Greater Kailash-1 New Delhi General Secretary
5. S. Amrik Singh Riyat Samka House, Satnampura, Phagwara Jt. Secretary 6. S.Gurminder Singh Bahra Sarai Road, Phagwara Honorary Treasurer7. Mrs. Vyoma Bhogal Dhatt 180-Civil Lines, Jalandhar Addl. Secretary
Co-Treasurer8. Mrs. Priyaneet Singh Delhi Member9. Mrs. Tejinder Bahra Sarai Road, Phagwara Member10. S. Kulwant Singh Bansal M/s P.S. Bansal & Sons, G.T.Road,
Phagwara Member
11. S. Ranjit Singh Thethi 656-Urban Estate, Phase-II Jalandhar Member12. S. Satnam Singh Sehmby 182-Hargobind Nagar, Phagwara Member13. S. Pritpal Singh Bhogal VPO-Domeli, Distt. Kapurthala Member14. S. Bhupinder Singh Virdi 6-Alfred Gardens, Southall, Middex,
UK Member
16. S. Inderjit Singh Plaha M/s Indo Industries, Industrial State, Jalandhar Member
17. S. Mandeep Singh Riat Samka House, Satnampura, Phagwara Member18. S. Balbir Singh 260-New Jawahar Nagar, Jalandhar Member19. S. Gurpal Singh Chana VPO Chachrari, Distt. Jalandhar Member20. Mrs. Ravneet Virdi 175-Virdi Niwas, Satnampura,
Phagwara Member
21. Mrs. Pritpal Kaur Bhogal 25, Maple Leaf Gardens, Barking Side, Essex,1G-6 1LG Member
22. S. Manveer Singh Sagoo B-260/A,3rd Floor, Greater Kailash-1 New Delhi Member
23.Mrs. Ravneet Bhogal Kalra
Ekam Villa,321/322 Royal Estate,Old Phagwara Road, New Bharat Petroleum, Jalandhar-144005
Member
2Signature of the Authorized Signatory of Society /Trust/Applicant with date
BOARD OF MANAGEMENT
1. Smt. Manpreet Kaur Bhogal ChairpersonChairperson/President,REC
2. Smt.Prabjot Kaur Saggo MemberGeneral Secretary,REC
3. S.Gurminder Singh Bahra MemberTreasure/Member,REC
4. Mrs.Vyoma Bhogal Dhutt MemberDirector,Ramgarhia Edul.Institutions
5. S. Mandeep Singh Riat MemberMember,REC
6. S.Pritpal Singh MemberMember,REC
7. Regional Officer, MemberMinistry of Human Resource DevelopmentDeptt.of Sec.& Hr.Edu..1-A,Laxman Bagh,Govt. of India Nawabganj (NRO Kanpur)208002
8. Director Technical Edu. & Indl.Trg.Pb. Sec-36A,Chd. Member
9. Director NITTIR (TTTI) Sec-26, Chandigarh Member(Nominee AICTE)
10. Supdt.Engg. PWD (B&R) Branch Pb.Jalandhar Member
11. S.Satnam Singh SehmbiMember,REC & Industrialist Member
12. Principal,Ramgarhia Polytechnic College,Phagwara Member/ Secretary
13. S. Baljit Singh Ubhi, H.O.D.(Mech Engg.) Member
14. Sh.Mukesh Kant,Accountant,REC. Member
CHAIRMAN/PRESIDENT, REC3Signature of the Authorized Signatory of Society /Trust/Applicant with date
Members of Academic Advisory Body
1. Mrs. Manpreet Kaur Bhogal Chairperson & President, Ramgarhia Educational Council, Phagwara.
2. S. Charanjeet Singh Saggoo Vice President, Ramgarhia Educational Council, Phagwara.
3. S.Gurminder Singh Bahra Treasurer, Ramgarhia Educational Council, Phagwara.
4 Mrs. Vyoma Datt, Director
Ramgarhia Institutes Phagwara
5 S. Jasbir Singh Khasaria Principal,
Ramgarhia Polytechnic College, Phagwara
6 S. Baljit Singh Ubhi HOD Mech. Engg. Engg. Ramgarhia Polytechnic College, Phagwara
7 Sh. Virender Kumar
HOD Comp. Engg. Ramgarhia Polytechnic College, Phagwara
Frequency of the Board Meetings and Academic Advisory Body ---- Twice in a Year --
4Signature of the Authorized Signatory of Society /Trust/Applicant with date
Organization structure of
Ramgarhia Polytechnic College
Vice President
Gen. Secy.
Director
Principal
HOD’S
5Signature of the Authorized Signatory of Society /Trust/Applicant with date
Supporting Administrative &Technical Staff
President /Chairman
Faculty Members
Nature and Extent of involvement of faculty and students in academic affairs/improvements Yes Mechanism/Norms & Procedure for democratic/good Governance Yes
Student Feedback on Institutional Governance/faculty performance Yes
Grievance redressal mechanism for faculty, staff and students Yes
V. PROGRAMMES Name of the Programmes approved by the AICTE
Diploma in Mech. Engg. Diploma in Computer Engg. Diploma in Civil Engg. Diploma in Elect Engg.
Diploma in Eltx & Comm. Engg.
Diploma in Civil Engg. Diploma in Mech. Engg. Diploma in Computer Engg.
For each Programme the following details are to be given:
Name of Diploma No. of seats at the time of admission
Duration Fee Placement Facilities
Diploma in Elect. Engg
60+6 3 Years
As
prescribed
By Pb.
Govt/PSBTE
Trg & Placement Cell Is availableDiploma in Mech. Engg.
60+6(M+E) 3 Years
Diploma in Civil Engg 60+6(M+E) 3 Years
Diploma in ECE Engg 60+6 3 Years
Diploma in Computer Engg
60+6(M+E) 3 Years
6Signature of the Authorized Signatory of Society /Trust/Applicant with date
Morning Shift
Evening Shift
Campus placement in last three years with minimum salary, maximum salary and average salary
19 (i) Total no. of students placed by the Institution through its Placement Cell (Discipline wise)
Year Discipline Total no. of students
passed out (last 3 years)
Total no. of students selected through
placement cell(last 3 years)
Total no. of students joined
2017 Mech. Engg 02 02
Comp. Engg 13 13
Civil. Engg 08 08
Electrical. Engg 05 05
ECE 03 03
2016 Mech. Engg 07 07
Comp. Engg 05 05
Civil Engg 07 07
Electrical Engg .04 04
ECE 04 04
2015 Mech. Engg 27 17
Comp. Engg 37 21
Civil Engg 04 04
Electrical Engg 13 15
ECE 27 10
7Signature of the Authorized Signatory of Society /Trust/Applicant with date
19 (ii) Details of organizations, which visited the institution for placement during the last three years.
Year No. of Organizations Name of the Organizations
2017 11
MK Builders LDH.GNA Udyog Ltd. Bundala
Hamco Ispat Ltd. JalandharGNA Axles MehtianaSoma Enterprises N. DelhiFine Switches Pvt. Ltd. PhagwaraTrident BarnalaTech-Mohindra New DelhiH.R. International JalandharHCL Tech. MohaliProximaforg (P) Ltd. jalandhar
2016 15
M/S K.K. Ind. JalandharGN Group of Ind. MehtianaAkal Industry Phagwara. Hamco Ispat Ltd. JalandharState Engg. Corp. ChachokiFine Switches Pvt. Ltd. PhagwaraEureka Electro Soft Pvt Ltd MohaliGNA Udyog Ltd. BundalaEjoin Tech. JalandharNativ Engg. Planet ChandigarhProximaforg (P) Ltd. jalandharH.R. International JalandharHCL Tech. Mohali
Vijay Cycles JalandharG.B. Tools JalandharOmega Martitime Management Services Pvt. Ltd. Chd.Mentor India Chd.
GNA Udyog Ltd. Bundala
MitterFastnersLdh
Kenzo International Baddi HP
8Signature of the Authorized Signatory of Society /Trust/Applicant with date
201513
Tata Moter’s Ltd. Pant Nagar
Ashi India Glass Ltd. Noida
R.S. Auto Ind. Ludhiana
L & T Technologies, Pune
Tech- Mohindra Mohali
M/S H R International Jalandhar
M/S K K Industry Jalandhar
Competent Synergies Chandigarh
9Signature of the Authorized Signatory of Society /Trust/Applicant with date
VI. FACULTY Branch wise list faculty members:
S.No.
Name (s) of the Teaching Faculty
Designation (Lecturer/ Asst.
Professor/ Professor)
Remarks
MECH. ENGG. DEPTT.1 S. B.S.Ubhi HOD2 Sh. Virender Kumar LECTURER3 Sh. Anil kumar -do-4 Sh. Gaurav Kumar -do-5 S. Amanjot Singh -do-6 Sh. Jaspreet Singh Sekhon -do-7 Sh. Ankit Mahajan -do-
COMPUTER ENGG. DEPTT1 Sh.Varinder Kumar HOD2 Ms. Poonam Rana LECTURER3 Ms. Suman Sharma -do-4 Mrs. Seema Kalia -do-5 Mrs. Anju Bala -do-6 Sh. Gagandeep -do-7 Sh. Pankaj Soni -do-8 Ms. Karamvir Kaur -do-
CIVIL ENGG. DEPTT1 S. Jasbir Singh HOD2 Sh. Bawa Chopra LECTURER3 S. Gurcharan singh -do-4 S. Charandeep Singh -do-5 S. Sukhdeep Singh -do-6 Sh. Rahul Verma -do-7 Sh. Dharminder -do-
ELECTRICAL ENGG. DEPTT1 S. Jasvir Singh HOD2 Sh. Kapil Bawa Lecturer3 Sh. Varun Shingari -do-4 Sh. Vishal Verma -do-5 S. Sandeep Singh -do-5 Sh. Rahul Bahl -do-6 Sh. Varun Shingari -do-7 Mrs. Medha Walia -do-
ELECTRONICS & COMM. ENGG. DEPTT1 Sh. Simranjit Singh Kahlon Off. HOD2 S. Gaganpreet Singh Lect3 Sh. Ashish Sharma -do-4 Sh. Ravi Karda -do-5 Mrs. Pooja -do-6 Sh. Sandeep Kumar -do-7 Ms. Shefali Chaudhary -do-
APP. SCIENCES DEPTT1 Mrs. Rupinder Kaur HOD2 S. K.S.Cheema LECTURER3 S. Jaswinder Singh -do-4 Sh. Pardeep Dhiman -do-5 S. Hardeep Singh -do-6 Ms. Suman -do-7 Ms. Rajni Arora -do-8 Mrs. Sonia Minhas -do-
10Signature of the Authorized Signatory of Society /Trust/Applicant with date
II. PROFILE OF DIRECTOR/PRINCIPAL WITH QUALIFICATIONS, TOTAL EXPERIENCE, AGE AND DURATION OF EMPLOYMENT AT THE INSTITUTE CONCERNED.
1. Name : Jasbir Singh Khasaria2. Date of Birth : 25-09-1964
3. Educational Qualification : ME in CIVIL ENGG.
4. Total Work Experience : 33 Years
• Teaching : 20
• Research
• Industry : 13
• Others
5. Area of Specializations : CIVIL ENGG.
6. Subjects teaching at diploma Level
Post diploma Level
7. Research guidance
No. of papers published in
Masters's - National Journals
Ph.D. - International Journals
- Conferences
8. Projects Carried out
9. Patents
10. Technology Transfer : To rural areas & unemployed youth for their better placement11. Research Publications
12. No. of Books published with details
VIII. FEE : As per PSBTE/Pb.Govt. Norms Details of fee, as approved by State fee Committee, for the Institution : As per PSBTE/Pb. Govt Norms Time schedule for payment of fee for the entire programme.: Semester wise No. of Fee waivers granted with amount and name of students. N/A
Number of scholarship offered by the institute, duration and amount N/A
Criteria for fee waivers/scholarship. As per Pb. Govt Norms Estimated cost of Boarding and Lodging in Hostels. N/A
11Signature of the Authorized Signatory of Society /Trust/Applicant with date
IX. ADMISSION Number of seats sanctioned with the year of approval. Number of students admitted under various
categories each year in the last three years.
Courses Sanction Intake
DIP (FT)MORNING SHIFT
Mech. Engg 60+6
Comp. Engg.60+6
Civil. Engg60+6
Elect. Engg.60+6
ECE60+6
DIP(FT)EVENING SHIFT
Civil Engg. 60+6
Mech. Engg. 60+6
Comp. Engg. 60+6
Number of applications received during last two years for admission under Management Quota and number
admitted.
X. ADMISSION PROCEDURE Mention the admission test being followed, name and address of the Test Agency and its URL
(website).
Number of seats allotted to different Test Qualified candidates separately [JET (State conducted
test/Board tests)/Association conducted test]
JET Students
Non-JET
Total
Calendar for admission against management/vacant seats: As per instruction given by PSBTE
Last date for request for applications.
Last date for submission of application.
Dates for announcing final results.
Release of admission list (main list and waiting list should be announced on the same day)
Date for acceptance by the candidate (time given should in no case be less than 15 days)
12Signature of the Authorized Signatory of Society /Trust/Applicant with date
Last date for closing of admission.
Starting of the Academic session.
The waiting list should be activated only on the expiry of date of main list.
The policy of refund of the fee, in case of withdrawal, should be clearly notified.
XI. CRITERIA AND WEIGHTAGES FOR ADMISSION : As guided by PSBTE
Describe each criteria with its respective weight-ages i.e. Admission Test, marks in qualifying
examination etc.
Mention the minimum level of acceptance, if any.
Mention the cut-off levels of percentage & percentile scores of the candidates in the
admission test for the last three years.
Display marks scored in Test etc. and in aggregate for all candidates who were admitted.
Item No I - XI must be given in information brochure and must be hosted as fixed content in the website of the Institution.The Website must be dynamically updated with regard to XII-XV.
XII. APPLICATION FORM Downloadable application form, with online submission possibilities.
XIII. LIST OF APPLICANTS List of candidates whose applications have been received along with percentile/percentage score for each of
the qualifying examination in separate categories for open seats. List of candidates who have applied along with
percentage and percentile score for Management quota seats.
XIV. RESULTS OF ADMISSION UNDER MANAGEMENT SEATS/VACANT SEATS: N/A
Composition of selection team for admission under Management Quota with the brief profiles of members
(This information be made available in the public domain after the admission process is over)
Score of the individual candidates admitted arranged in order of merit.
List of candidates who have been offered admission.
Waiting list of the candidates in order of merit to be operative from the last date of joining of the first list
candidates.
List of the candidates who joined within the date, vacancy position in each category before operation of
waiting list.
13Signature of the Authorized Signatory of Society /Trust/Applicant with date
XV. INFORMATION ON INFRASTRUCTURE AND OTHER RESOURCES AVAILABLE
LIBRARY:
Number of Library books/Titles/Journals available (programme-wise)
Number of books and periodicals :
1) Engineering & Technology Books/ other disciplines : 35949Offered by the respective polytechnic
2) Basic Sciences & Engineering Science of disciplines : 3022
3) Books on Communication skills management and : 301Standard general reading
4) Periodicals : 05
i) Discipline Wise List of Books
1. Civil Engg 10688
2. Electrical Engg 10946
3. Mechanical Engg 10926
4. ECE Engg 1869
5. Computer Engg 2125
6. Journal Books 2723
14Signature of the Authorized Signatory of Society /Trust/Applicant with date
Laboratory/Workshop Equipment DetailName of the Laboratory: - CHEMISTERY
S.No Name & Specification of Major/Essential Equipment required
for conduction of practical’s as per curriculum
Manufacturer Name
Years of Purchase
working condition/Not
1 Physical Balance Dee Jay Corporation,Jal 2004 Good Condition
2 Pipette ( 10ml), Pipette (20ml) ’’ 2004,2015 Good Condition
3 Burette, ’’ 2012 Good Condition
4 Measuring Flask ’’ 2012 Good Condition
5 China Dish ’’ 2013 Good Condition
6 Tripod Stand ’’ 2014 Good Condition
7 Copper Electrode ’’ 2004 Good Condition
8 Wire Gaguge ’’ 2015 Good Condition
9 Glass Rod ’’ 2004 Good Condition
10 Water Bath ’’ 2004 Good Condition
11 Copper Coil ’’ 2004 Good Condition
12 Air Condensor Stand ’’ 2004 Good Condition
13 Beaker, ’’ 2012 Good Condition
14 Dropper ’’ 2012 Good Condition
15 Battery Charger ’’ 2004 Good Condition
16 Weight Box ’’ 2004 Good Condition
17 White Glazzed Tiles ’’ 2002 Good Condition
18 Funnel(75ml) ’’ 2013 Good Condition
19 Desiceater ’’ 2004 Good Condition
20 Fractional Weight, ’’ 2004 Good Condition
21 Tengs(6’’) ’’ 2004 In Good Condition
22 Watch Glass(2’’ and 4’’) ’’ 2004 Good Condition
23 Conical Flask(50ml) ’’ 2015 Good Condition
24 Stirres ’’ 2004 Good Condition
15Signature of the Authorized Signatory of Society /Trust/Applicant with date
25 Rubber pipe ’’ 2004 Good Condition
26 Burner, ’’ 2004 Good Condition
27 Silica Crucible ’’ 2013 In Good Condition
28 Macro Bruette ’’ 2004 Good Condition
29 Distillation Plant ’’ 2005 Zero
30 Spirit Lamp ’’ 2006 Good Condition
31 Fisher Clamp
32 Tissue Roll
33 Measuring Cylinder, (10 & 50 ml) ’’ 2006,2012 Good Condition
34 Aluminium Foil ’’ 2006 Good Condition
35 Electric Furnace( muffle type),Electrical Furnace,(Oven)
’’ 1994 Good Condition
Name of the Laboratory: - PHYSICSS.No Name & Specification of
Major/Essential Equipment required for conduction of practical’s as per
curriculum
Manufacturer Name
Years of Purchase
working condition/Not
1 Optical bench Dee jay corp. 2001,2003,2006 good condition
2 Ohm’s haw apparatus assembly Mars Elec, Ambala,Deejay Corp,Jal
2005,2016 good condition
3 Series-panallel circuits of resistances Mars elec,ambala 2005 good condition
4 Wheat stone bridge/slide wire bridge Deejay corp.Jal 2012 good condition
5 p-n junction diode apparatus Mars elec.ambala 2005 good condition
6 C r o Mars elec,ambala 2005 good condition
7 Resistance boxes Deejay corp,jal 2012,2016 good condition
8 Fortin’s barometer Misc,deejaycorp,jal 1962,2016 Partially good
9 Galvanometer Misc 1962,2003 Partially good
10 Conversion of galvanometer into voltmeter Mars elec,ambala 2005 good condition
11 Conversion of galvanometer into ammeter ’’ 2005 good condition
12 Battery eliminator Deejay corp,jal 2001,2012 Partially good
CEName of the Laboratory:- AM (Applied Mechanic)
S.No. Name & Specification of Major/Essential Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 Bending Moment Test App. Good condition2 Circular Horizontal App. Good condition3 Double purchase winch crab Good condition4 Frictionless wheel with lever Good condition5 Inclined plane Good condition6 Oil crane Good condition7 Personal horse power testing machine Good condition8 Simple jib crane Oriental Science
apparatus Workshop
Good condition
9 Screw jack Oriental Science apparatus Workshop
Good condition
10 Single purchase winch crab Good condition11 System of pulleys Good condition12 Salter’s App. (simply supporting beam) Good condition
16Signature of the Authorized Signatory of Society /Trust/Applicant with date
13 Spring balance calibrating machine Good condition14 Teaching model of worm and worm wheel Oriental Science
apparatus Workshop
Good condition
15 Teaching model of Bevel Gear Good condition16 Vernier calliper Good condition17 Wall hanging screw jack Good condition18 Worm and worm wheel Good condition19 Wooden meter rod Good condition20 Weights Good condition
10kg Good condition5kg Good condition2kg Good condition1kg Good condition250gm Good condition125gm Good condition500gm Good condition1kg with hanger Good condition2kg with hanger Good condition
21 Weight box Good condition22 Wooden App. (combine coil and flat belt friction app.) Good condition23 Gravesand App. Good condition
Name of the Laboratory:- Concrete Technology LabS.No. Name & Specification of Major/Essential Equipment
required for conduction of practical’s as per curriculumManufacturer
NameYear of
Purchaseworking
condition/Not1. Concrete Mixer Garlic & co.
madrasGood condition
2. Mechanical sieve shaker Good condition3. Platform weighting machine Asiatic Mach. Co.
Pvt. Ltd HowrahGood condition
4. Compression TestingMachine hand operated
Hyd. & Engg Instrument Delhi
1976 Good condition
5. Cube vibration National Instrument Corp.
Roorke
Good condition
6. Tensile testing of Cement machine
A.S.I Sales Pvt. Ltd New Delhi
Good condition
7. Sample splitter Kailash Bros. Pvt. Ltd Delhi
Good condition
8. Slump test App Adrem Surveying Industrial Roorkee
Good condition
9. Slump cones Adrem Surveying Industrial Roorkee
Good condition
10. Vicat’s Appratus Adrem Surveying Industrial Roorkee
Good condition
11. LE.Chatelier ‘s App Partially good12. Flekiness Gauges Hyd. & Engg
Instrument DelhiGood condition
13. Elongation Gauges Hyd. & Engg Instrument Delhi
Good condition
14. Weighting Balance R.K Ent. Haryana Good condition15. Weight Box Good condition16. Stop Clocks Good condition17. Tuner for vib. machine Good condition18. Rectangular metal sieves Partially good19. Brass Sieves Partially good20. Curing Tank Good condition21. Trowels Good condition22. Beam Moulds Good condition23. Cube Moulds round base Good condition
17Signature of the Authorized Signatory of Society /Trust/Applicant with date
24. Cube Moulds Square base Good condition25. Density Buckets Good condition26. Core Cutter App Good condition27. Cylinderical Moulds Good condition
28. Aluminium Sieve Partially good29. Brequette Moulds Partially good30. G.I . Sheets Good condition31. Cement Moulds Good condition32. Sheet Cubes H.Made Partially good33. Brass Sieves 18” dia Good condition34. Weights of 8 pieces set Good condition35. Rebound Hammer 6-3-06 Good condition36. Slump Test App 6-3-06 Good condition37. Vicat’s App 6-3-06 Good condition38. Digital Thermo meter 6-3-06 Good condition39. Stop Watches 6-3-06 Good condition40. Hot plate 6-3-06 Good condition41. Steel Tape 6-3-06 Good condition42. Pycometer 6-3-06 Good condition43. Density Basket 6-3-06 Good condition44. Electronic Balance 6-3-06 Good condition45. Blaim’s Air Permeability
Test-do- Partially good
46. Compacting Factor Test -do- Partially good47. Table Vibrator -do- Partially good48. Brass Sieves -do- Partially good49. Glass Beaker From w/s Lab Partially good50. Glass Beaker -do- Partially good
Name of the Laboratory:- HydraulicsS.No. Name & Specification of Major/Essential Equipment
required for conduction of practical’s as per curriculumManufacturer
NameYear of
Purchaseworking
condition/Not1. ½ meter rod 16/12/1956 Good condition2. Manometer with stand 16/12/1956 Good condition3. (i) Rubber tube 3/5’’
(ii) Rubber tube ½’’16/12/195616/12/1956
Partially good
4. Manometer y-type 27/7/1961 Partially good5. pipe friction APP Partially good6. Notch apparatus Partially good
18Signature of the Authorized Signatory of Society /Trust/Applicant with date
7. Orifice app tank Partially good8. Measuring tank Partially good9. Bernoulli’s TH Good condition10. 1. Flow nozzle meter 3/4”
2. Flow Partially good
11. 1.Venturimeter 1”2.Venturimeter ½’’
Good condition
12. Dalton turbine with accessories Good condition13. Ship for metacentric Ht. App. 1963 Partially good14. Hydraulic tubing fitting
(i) pitot tube (II)painter guage 30cm(III)paintervguage15cm(iV)peacock valve (v)garflex tubing(vi)rubber V belt
1963 Partially good
15. Francis turbine 4Ft. 1 type 1963 Partially good16. Stop Watch 1963 Partially good17. Nozzle meter 1’’dia Partially good18. 1.Starter 15HP
2.switch 15 A3.Switch 30A4.Switch 60A
Partially good
19. Gauge glass 18’’ Partially good20. Amp meter 60 A Partially good21. Reciprocating pump
With accessoriesGood condition
22. (i)Manometer(ii)inclined manometer(iii)flow nozzle meter(iv)peacock valve (v) orifice meter 1’’ with parts(vi) scale 90cm
(vii)scale 45cm(viii)revolving disc(ix) hook gauge 30cm(x) hook gauge 50cm(xi) hook gauge 100cm(xii)venturimeter 4’’x2’’(xiii)venturimeter 2 ’’x1/4’’(xiv)pitot tube(xv)arramgement for fitting peacock valve in manometer
Partially good
23. Mercury 1963 Partially good24 Pinch clips 1963 Partially good25. Jug and wash basin 1963 Good condition26. C.pump with detail 1963 Partially good27. Contraction flow pipe 1967 Partially good28. Hose pipe 1964 Partially good29. Garblex tube 1964 Partially good30. Wheel value 1964 Partially good31. (i)Manometer u –tube
(ii)Manometer 75cm1969 Partially good
32. Plastic pipe 3/5’’ 1973 Partially good33. Bib cock 1” 1981 Partially good34. C-pump with hose fast 1982 Partially good35. Jain dorry pulleys 1982 Partially good36. Glass tube 3/5’’ 1981 Partially good37. 1.foot value 4’’ 1982 Partially good
19Signature of the Authorized Signatory of Society /Trust/Applicant with date
2.foot value3’’38. LOCK(KAMAL) Partially good39. Price current meter Partially good40. Hyraulic bench Good condition
Name of the Laboratory: - SURVEY
S.No. Name & Specification of Major/Essential Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 LEVEL National Emproium Roorkee
Good condition
2 LEVEL STAND ,, Good condition3 LEVELLING STAFF ,, Good condition4 THEODOLITE ,, Good condition5 THEODOLITE STAND ,, Good condition6 PRISMATIC COMPASS WITH STAND ADEM Surveying
IndustryGood condition
7 ALIDADES ,, Good condition8 TELESCOPIC ALIDADES Baasler Good condition
TAL-1,TAL-2 Good condition9 NAUTICAL SEXTANT Baasler Good condition10 CEYLON GHAT TRACER Baa & Sons
(Roorkee)Good condition
11 ANGLE FINDER Cooke, Troughtou &Simms LTD
Good condition
12 CLINOMETER COMPASS National Emproium Roorkee
Good condition
13 ABNEY’S LEVEL Good condition14 HAND LEVEL Good condition15 TANGENT CLINOMETER Good condition16 PLANIMETER National
Emproium Roorkee
Good condition
17 PLANIMETER ,, Good condition18 COWELY LEVEL Good condition
STAND Good condition STAFF Good condition
19 INDIAN OPTICAL SQUARE Good condition20 SPEEDO METER Smiths Indst.
DivisonGood condition
21 THROUGH COMPASS ADEM Surveying Industry
Good condition
22 SPIRIL LEVEL ,, Good condition
20Signature of the Authorized Signatory of Society /Trust/Applicant with date
23 CROSS STAFF Good condition24 LOCAL CROSS STAFF Good condition25 PANTA GRAPH Good condition26 RAIN GAUGE Good condition27 MASON'S SQUARE Good condition28 OFF-SETS ROD Partially good29 PLANE TABLE WITH STAND ADEM Surveying
IndustryGood condition
30 METALLIC TAPE 30 MT/100' Freemans Partially good31 STEEL TAPE 15 MT/50' Partially good32 BRASS PARALLEL RULER Partially good33 U-FOLK Good condition34 PLUMB BOB Good condition35 METRIC CHAIN Good condition36 RANGING ROD Good condition37 WOODEN SCALE Good condition38 ARROWS Good condition39 AUTO LEVEL National
Emproium Roorkee
Good condition
40 WOODEN CROSS STAFF Good condition41 ALUMINIUM RULE Partially good
Name of the Laboratory:- Highway Engg./ Transportation Engg.Lab
S.No. Name & Specification of Major/Essential Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1. LOCK ( 50 mm & 67 mm) EGD Good condition
2. ELECTRIC OVEN AIMIL 15-03-1970 Good condition
3. AIMIL STANDARD PENETROMETER
( COMPLETE SET )
DEVAL
14-04-1970
Good condition
4. DEVAL ATTRITION
TESTING MACHINE
AIMIL 14-04-1970 Good condition
5. LOS ANGELES ABRASION TESTING
MACHINE
CORNING 14-04-1970 Good condition
6. RING & BALL APPARATUS AIMIL 14-04-1970 Good condition
7. DUCTILITY TESTING
MACHINE
14-04-1970 Good condition
21Signature of the Authorized Signatory of Society /Trust/Applicant with date
8. ABEL’S FLASH POINT
APPARATUS
14-04-1970 Good condition
9. PROCTOR COMPACTION APPARATUS
HEICO 14-04-1970 Good condition
10. VISCOMETER AIMIL 14-04-1970 Good condition
11. THERMOMETERS Partially good12. CONTAINERS DGW Good condition
13. BALANCE IMKC 25-03-1982 Good condition
14. WEIGHT’S(20gm,50gg,100gm,200gm, 500gm,1000gm,2000gm, &5000gmTotal 8 NOS )
AIB 25-03-1982 Good condition
15. SIEVES (1.70 mm12.5mm,10.00 &2.36 mm
LAWRENCE &
MAYO/HEICO
30-03-1984 Good condition
16. IMPACT TESTING
MACHINE
HEICO 30-03-1974 Good condition
17. ADJUSTABLE WRENCH JHALANI 04-04-1987 Good condition
18. BENZENE BOTTEL
(2.5 K g )
QUALIKEMS 06-03-2006 Good condition
19. PENETROMETER
NEEDLE
BAKER
MARCER
06-03-2006 Good condition
Name of the Laboratory:- Water Supply Waste Water Engg. Lab
S.No. Name & Specification of Major/Essential Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 DIGITAL PH METER HPG System 15-11-06 Good condition2 DIGITAL CONDUCTIVITY HPG System 15-11-06 Good condition3 DIGITAL DO METER HPG System “ Good condition4 DIGITAL TDS METER HPG System “ Good condition5 DIGITAL TURBIDITY METER HPG System “ Good condition6 JAR TESTING APP “ Good condition7 BEAKER (100 ML) Good condition8 BEAKER (250 ML) Good condition9 BEAKER (500 ML) Good condition10 BEAKER (1000 ML) Good condition11 CONICAL FLASK Good condition12 PIPPETTE (10 ML) Good condition13 PIPPETTE (20 ML) Good condition14 MEASURING CYLINDER (100ML) Good condition15 MEASURING CYLINDER (250ML) Good condition
22Signature of the Authorized Signatory of Society /Trust/Applicant with date
Name of the Laboratory:- SOIL ENGG.S.No. Name & Specification of Major/Essential Equipment
required for conduction of practical’s as per curriculumManufacturer
NameYear of
Purchaseworking
condition/Not1 Direct shear test app. hand operated HIECO 1976 Good condition2 Field density test apparatus HEICO 1976 Good condition3 Penetration test assembly Tripod 1976 Good condition4 Split spoon sampler 1976 Good condition5 Drop hammer 65kg 1976 Good condition6 Guide assembly complete 1976 Good condition7 Extension rod 1m long 1976 Good condition8 Post hole auger 50mm ø 1976 Good condition9 Past hole auger 100mm ø 1976 Good condition10 Unconfined comp. testing app.(Hand operated proving ring) HEICO 1976 Good condition11 (a)Test sieves 80,
40mm,20mm,10mm,4.75mm,2.36mm,1.18m(b) 600µ,300 µ,150 µ,212 µ,75 µ,70 µ,412 µ(c) Lid and Receiver(d) 200mm dia spun brass frame
One sieve 425 u is lost during working in laboratory
1976 Good condition
12 (a) Liquid limit device with tools complete, hand operated(ASTM=1No.)(b) Liquid limit device motorized
1969 Good condition
13 Balance 10 kg capacity Kelton counter IMKC, Amritsar
1982 Good condition
14 Weight10kg,5kg,1kg,1kg,500gm,200gm,100gm,50gm,20gm
1982 Good condition
15 Rope 1/2” dia 1kg weight 1992 Good condition16 Screw driver 600mm 1992 Good condition17 Plier 1992 Good condition18 Guide Tripod for SPT 1982 Good condition19 Dial gauge for direct shear test .01×21mm Baker marcer 1986 Good condition20 Plate load test apparatus HEICO 1986 Good condition21 Sieve shaker motorized HEICO 1986 Good condition22 Hydrometer 1986 Good condition23 (i) Compaction Rammer
(ii) Proctor’s comp- action test app. with Plate collar1986 Good condition
24 Field density kit 1986 Good condition25 Crucible china dish Good condition26 1/2" ø
3” øGood condition
27 Vane shear test app. HEICO Good condition28 Constant fallingheadPermeameter HEICO 2008 Good condition29 High sensitivity proving ring 20kg HEICO 1976 Partially good30 Adopter 1976 Partially good31 L –key 1/32” 1992 Partially good32 Trowel 1992 Partially good33 Steel tape 3m long MARCOLT 1992 Partially good34 Universal extruder 1986 Partially good
EC
Name of the Laboratory:- Digital & Microprocessors
S.No. Name & Specification of Major/Essential Manufacturer Year of working
23Signature of the Authorized Signatory of Society /Trust/Applicant with date
Equipment required for conduction of practical’s as per curriculum
Name Purchase condition/Not
1 LOGIC GATES USING TTL IC’ S. Mars Equipments 2004 In good condition
2 LOGIC GATES USING NAND & NOR GATES. ’’ 2004 In good condition
3 DIGITAL ADDER & SUBTRACTOR. ’’ 2004 Partially condition
4 FLIP FLOP USING NAND GATES. ’’ 2004 In good condition
5 STUDY OF FOUR BIT SHIFT REGISTERS ’’ 2004 In good condition
6 STUDY OF ADDER AND SUBTRACTOR ’’ 2004 Partially Good
7 STUDY OF 4 BIT COUNTERS ’’ 2004 Partially Good
8 STUDY OF ENCODERS AND DECODERS ’’ 2004 Partially Good
9 STUDY OF 16:1MUX. AND 1:16 DEMUX. ’’ 2004 Partially Good
10 ANALOG TO DIGITAL CONVERTER. ’’ 2004 Partially Good
11 8085 MICROPROCESSOR KIT ’’ 2005 Partially Good
12 8086 MICROPROCESSOR KIT ’’ 2005 Partially Good
Name of the Laboratory:- Networks
S.No. Name & Specification of Major/Essential Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 ‘T’ TYPE PASSIVE FILTERS Mars Equipment 2004 In good condition
2 m-DERIVED T TYPE LOW PASS FILTER ’’ 2004 In good condition
3 π –TYPE PASSIVE FILTER ’’ 2004 In good condition
4 ACTIVE FILTER USING OP-AMPLIFIER ’’ 2004 Zero
5 T, π AND BRIDGED T ATTENUATOR ’’ 2004 In good condition
6 CHAR. IMPEDENCE OF SYMM. T& π NETWORKCHAR. IMPED. OF ASYMM. T& π NETWORK
’’ 2004 In good condition
7 AUDIO FREQ. FUNCTION GENERATOR ’’ 2004 In good condition
8 DUAL TRACE CRO ’’ 2004 Partially Good
Name of the Laboratory:- Industrial Electronics & Instrumentation
S.No. Name & Specification of Major/Essential Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 SCR SINGLE PHASE H.W., F.W., F.C. BRIDGE RECT./CONV.
Mars Equipment 2005 In good condition
2 STUDY OF SCR FIRING CIRCUITS ’’ 2005 In good condition
3 STUDY OF PHASE CONTROL USING TRIAC. ’’ 2005 In good condition
4 OVER VOLTAGE PROTECTION USING SCR. ’’ 2005 Zero
5 STRAIN GAUGE & MICRO STRAIN FOR CANTILEVER BEAM
’’ 2005 Zero
6 STUDY OF THERMISTOR CHARACTERISTICS. ’’ 2004 In good condition
7 STUDY OF PHOTO DIODE CHARACTERISTICS ’’ 2005 In good condition
8 STUDY OF INSTRUMENTATION AMPLIFIER.OUTPUT POWER METER 150WATT
’’ 2005 In good condition
24Signature of the Authorized Signatory of Society /Trust/Applicant with date
Name of the Laboratory:- Consumer Electronics
S.No. Name & Specification of Major/Essential Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 SET OF LOUDSPEAKER (DIRECT RADIATING, HORN TYPE).
Mars Equipment 2005 Zero
2 ME 1204 CASSETTE PLAYER & RECORDER 00 00
3 STUDY OF STEREO CASSETTE PLAYER. Mars Equipment 2005 Zero
4 OUTPUT POWER METER 150WATT. 00 00
5 VIDEO COMPACT DISC DEMONSTRATOR. 00 00
6 1KHZ –200KHZ FUNCTION GENERATOR. Mars equipment 2005 In good condition
7 COLOR TV DEMONSTRATOR. ’’ 2005 Zero
8 PA SYSTEM WITH MICROPHONE. ’’ 2005 Zero
9 TWO BAND RADIO RECEIVER KITS. ’’ 2005 Zero
10 CRO 30 MHZ, DUAL CHANNEL, 2 TRACE. ’’ 2005 In good condition
Name of the Laboratory:-Communications
S.No. Name & Specification of Major/Essential Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 AMPLITUDE MOD. AND DEMODULATION Mars Equipment 2004 Zero
2 FREQUENCY MOD. AND DEMODULATION ’’ 2004 Zero
3 PULSE MOD. AND DEMODULATION ’’ 2004 In good condition
4 BALANCED MOD. AND DEMODULATOR ’’ 2004 Partially Good
5 PULSE WIDTH MODULATION AND DEMODULATION
’’ 2004 Zero
6 PULSE POSITION MOD. & DEMOD. ’’ 2004 In good condition
7 TIME DIVISION MULTIPLEXING (TDM) ’’ 2004 Zero
8 STUDY OF ANALOG SIGNAL SAMPLING ’’ 2004 In good condition
9 DELTA MOD. AND DEMOD. ’’ 2004 In good condition
10 FM USING VCO 00 00
11 PULSE CODE MODULATION ’’ 2004 Partially Good
12 DUAL TRACE CRO( 60 MHZ) ’’ 2004 In good condition
13 RADIO RECEIVER KIT ’’ 2004 zero
14 OPTICAL FIBRE TRANSMITTER & RECEIVER KIT. 00 00
Name of the Laboratory:-Electronics Devices & Circuits
S.No. Name & Specification of Major/Essential Manufacturer Year of working 25Signature of the Authorized Signatory of Society /Trust/Applicant with date
Equipment required for conduction of practical’s as per curriculum
Name Purchase condition/Not
1 LDR CHARACTERISTICS APPARATUS. Mars Equipment 2004 In good condition
2 CHAR . OF OPTO ELECTRONIC DEVICES. ’’ 2004 Partially Good
3 CLIPPING CIRCUIT. ’’ 2004 In good condition
4 TUNED OSCILLATOR & AMPLIFIER. ’’ 2004 Zero
5 COMMON BASE TRANSISTOR AMPLIFIER. ’’ 2004 In good condition
6 TRANSISTOR PUSH PULL AMPLIFIER. ’’ 2004 Zero
7 BIASING TECHNIQUES OF TRANSISTOR. ’’ 2004 Partially Good
8 OP-AMP AS INVERTING & NON-INVERTING. ’’ 2004 In good condition
9 CHARACTERISTICS OF OP-AMPLIFIER. ’’ 2004 Zero
10 OP-AMP AS ADDER, SUB,INTEGRATOR& DIFF ’’ 2004 In good condition
11 OP-AMPLIFIER AS SCHMITT TRIGGER ’’ 2004 Zero
12 MONOSTABLE MULTIVI. USING TRANSISTOR ’’ 2004 In good condition
13 ASTABLE MULTIVIBRATOR USING TRANS. ’’ 2004 In good condition
14 HARTLEY &COLLPIT OSCILLATOR. ’’ 2004 Zero
15 UJT AS RELAXATION OSCILLATOR ’’ 2004 Zero
16 TRANSISTOR CHAR. APPARATUS ’’ 2004 Partially Good
17 SCR CHARACTERISTICS APPARATUS ’’ 2004 Partially Good
18 FET CHARACTERISTICS APPARATUS ’’ 2004 Partially Good
19 PN JUNCTION DIODE CHAR. APPARATUs ’’ 2004 In good condition
20 ZENER DIODE CHAR. APPARATUS ’’ 2004 In good condition
21 THERMISTOR CHAR. APPARATUS ’’ 2004 Zero
22 TRIAC CHARACTERISTICS APPARATUS ’’ 2004 Zero
23 LCR RESONANCE CIRCUIT APPARATUS ’’ 2004 In good condition
24 HALF/ FULL & BRIDGE RECTIFIER ’’ 2004 In good condition
25 AUDIO POWER AMPLIFIER USING IC 810 ’’ 2004 Zero
26 FET COMMON SOURCE AMPLIFIER ’’ 2004 Partially Good
27 EMITTER FOLLOWER CIRCUIT ’’ 2004 In good condition
28 COMMON EMITTER TRANS. AMPLIFIER ’’ 2004 In good condition
29 TWO STAGE RC COUPLED TRANS. AMP. ’’ 2004 In good condition
30 COMPLEMENTARY SYMMETRY AMPLIFIER ’’ 2004 Zero
31 SWITCHING ACTION OF A TRANSISTOR ’’ 2004 In good condition
32 AUDIO FREQ. FUNCTION GENERATOR ’’ 2004 In good condition
33 DUAL TRACE CRO ’’ 2004 In good condition
34 DIGITAL MULTIMETER ’’ 2004 In good condition
EEName of the Laboratory:- Electrical Engg.S.No. Name & Specification of Major/Essential
Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 M/G SET 5 H.P. GENERATOR 3KWSHUNT WOUND COMMUTATOR MOTOR.
W.J Alcock co.Calcutta
1955 In good condition
26Signature of the Authorized Signatory of Society /Trust/Applicant with date
INDUCTION MOTOR WITH 1 PHASE 2 MOTOR ALTERNATOR SET 3KW A/C 3-PHASE
440V.” ” 1955 In good condition
3 FREQUENCY METER. Toshniwal bros.bombay
1955 In good condition
4 MEGGER Norma 1955 In good condition
5 WHEAT STONE BRIDGE. M/S osaw,Ambala
1955 In good condition
6 AVO METER.,GALVANOMETER.,TACHOMETER.,POTENTIOMETER.
W.J Alcock co.Calcutta
1955 In good condition
7 ALTERNATOR. Chicago tyr co.ltd 1955 In good condition
8 RADIO DYNAMIC DEMONSTRATOR SET. SYNCHROSCOPE.
Chicago tyr co.ltd 1955 Zero
9 WATTMETER. M/S Automatic Electric Pvt.Ltd
2003 In good condition
10 STARTER & MOTOR SPLIT 1-PHASE MOTOR. In good condition
11 REPULSION INDUCTION TYPE MOTOR 1 H.P. &0.5 H.P.
In good condition
12 SLIP RING INDUCTION MOTOR – 5H.P. WITH STARTER.
In good condition
13 SOAM BRAKES (COMPLETE). Gomment kale,Bombay
1961 In good condition
14 EARTH TESTER. Harsh trading company
1961 In good condition
15 D.C. SHUNT GENERATOR.D.C. COMP. GENERATOR.
In good condition
16 FLUX METER. Toshniwal bro.pvt.ltd
Zero
17 COMBINED SETS A.C. ALTERNATORS 3- PHASE WITH COMP. MOTOR.
” ” 1963 In good condition
18 DC/AC MOTOR GENERATOR SETS. ” ” 1963 In good condition
19 D.C. SHUNT GENERATOR, WITH D.C. COMP. MOTOR.
” ” 1963 In good condition
20 D.C. SERIES GENERATOR WITH SERIES MOTOR. ” ” 1963 In good condition
21 TROLLEY MOUNTED ELECTRIC LOAD. ” ” In good condition
Name of the Laboratory:- Electronics Engg.S.No. Name & Specification of Major/Essential
Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 Ammeter (DC) 0-10 MA, 0-50 MA, 0-100 MA, 50-0-50 µA,0-250µA Ammeter(SHANTI) 0-25 MA, 0-01 MA, 0-05-01 Amp, 0-2.5µA,
Oswal scientific store,ambala
cantt.
1976 81% working Condition
2 Bread Board 1983 In good condition
3 Voltmeter DC 0-10 V, 0-25 VVoltmeter (SHANTI) 0-1000 Mv, 0-01-03 V, 0-100 MA
Oswal scientific store,ambala
cantt.
1976 In good condition
4 Power Supply 0-45 V Maraj electronics inds.
1977 In good condition
5 p.n junction diode kit for V-I chracterstic Scientific sales corp.hoshiarpur
2018 Good condition
6 Fet kit for V-I characterstic ’ ’ 2018 Good condition
27Signature of the Authorized Signatory of Society /Trust/Applicant with date
7 Zener diode kit V-I characterstic ’ ’ 2018 Good condition
8 Halfway rectifierkit ’ ’ 2018 Good condition
9 Fullway rectifier ’ ’ 2018 Good condition
10 I/P & O/P characterstic of CB configuration ’ ’ 2018 Good condition
11 I/P & O/P charcterstic CE configurations ’ ’ 2018 Good condition
12 Tacnometer ’ ’ 2018 Good condition
13 Triac characterstic trainer kit ’ ’ 2018 Good condition
14 SCR kit for V-I characterstics ’ ’ 2018 Good condition
15 Dieac characterstics trainer kit ’ ’ 2018 Good condition
16 UJT as relaxation oscillator kit ’ ’ 2018 Good condition
MEName of the Laboratory:- SOM (Strength of Materials)S.No. Name & Specification of Major/Essential
Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 Universal testing Machine 1985 In good condition
2 Rock Well Hardness Tester 1985 In good condition
3 Deflection Bed Apparatus 1985 In good condition
4 Reverse Torsion Sider Machine 1984 In good condition
5 Impact Testing Machine 1984 In good condition
6 Searl’s Apparatus 1976 In good condition
7 Brinell Testing Machine 1985 In good condition
8 Simple Torsion Machine 1985 In good condition
9 UTM Under MODROBS 2008 In good condition
10 Hardness Tester Under MODROBS 2008 In good condition
Name of the Laboratory:- RAC (Refrigeration & AC )S.No. Name & Specification of Major/Essential
Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 Air-Conditioner Model Gem 1 Ton capacityDesert Cooler(fan Type)
GEM 1976 In good condition
2 Ice-Making Making Machine(0.5 HP Condensing Unit Model)
Bluestar 1957 Partially Condition
3 Refrigerator Model Gem 135 Ltr Gem 1977 In good condition
4 (Drier /Strainer) Valve Key ¼” 5Kg,Charging Tube ,RachetSpanner,Tube Cutter ,TestPin,Adustable screw Wrench,ChargingValve,Pressuire gauge(300 lbs),Combined Pressure Gauge(0-30” ;0-150 lbs),Flaring Tool
1976 In good condition
28Signature of the Authorized Signatory of Society /Trust/Applicant with date
5 Solenoid Valve Ranko stat 1976 In good condition
6 L.V.ControlSwtich 1976 In good condition
7 Blow Lamp 1983 In good condition
8 Leek detector FREC 1983 Partially Condition
9 Empty cylinder 1981 In good condition
10 Thermometer(Mercury) 1976 In good condition
11 Refregeration Trainer 1/6 HP 2010 In good condition
12 Single cylinderopen type compressor with moter Assembly
2010 In good condition
Name of the Laboratory:-Metrology & Inst. S.No. Name & Specification of Major/Essential
Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 Vernier Calliper Mitu Toyo In good condition
2 Micrometer ’’ In good condition
3 Vernier Height Gauge ’’ In good condition
4 Universal Bevel Protector ’’ In good condition
5 Sine Bar ’’ In good condition
6 Slip Gauges Set ’’ In good condition
7 Tool Maker’s Microscope ’’ In good condition
8 Dial Indicator ’’ In good condition
Name of the Laboratory:- ThermalS.No. Name & Specification of Major/Essential
Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 Air Compressor Machinen Apparate
1955 In good condition
2 Barometer(Fountains)a. Battery(Exide 12volt)b. Crocodile Clips
1964 In good condition
3 Boyle’s Calorimeter Baird & Tattocel.ltd.
1955 In good condition
4 Bomb Calorimeter ’’ 1956 In good condition
5 Calorifier 300 gallons ’’ 1957 In good condition
6 Separating and Throttling Meter(complete) 1963 In good condition
7 Chemical Balance 1956 In good condition
8 Diesel Engine(Kirloskar) 5 HP Kirlosker 1977 In good condition
9 Engine Indicator 1955 In good condition
10 Gas analysis Apparatus 1987 In good condition
11 Petrol engine GEN Set Chicago radio co.ltd.
1955 In good condition
12 Governor Models Kaygrr bro.madras 1961 In good condition
13 Hydraulic Dynamometer P.S.G Inds. 1964 In good condition
14 Pyrometer 1977 In good condition
15 Ruston Diesel Engine Greaves Cotton & Company
1952 Partially Condition
16 Visco Meter 1987 In good condition
17 Yenmar Diesel Engine Yamoka Deisel Engine ltd.
1952 Partially condition
18 Zenith Carburetor Model 1987 In good condition
29Signature of the Authorized Signatory of Society /Trust/Applicant with date
19 Testing Rig for Morse Test Under MODROBS 2008 In good condition
20 CoschranBoiler(installed on foundation) Jessop.co.ltd 1957
21 Locomotive Parts 1983 In good condition
22 Simple Vertical Boiler Jessop.co.ltd 1983
23 Boiler models (A) Cornish Boiler(B)Lancashire Boiler(C) Return Tube Boiler(D) Wilcox & Babcock Boiler(E) Superheater
SSC.ltd 1983 In good condition
24 Boiler Mounting Models(A) Water level indicator (B) Safety Valve (C) Spring loader Safety Valve(D) Steam trap
’’ 1983 In good condition
25 Calorifier 300 gallons26 Seprating&Throhat Calorimeter
Name of the Laboratory:- Automobile S.No. Name & Specification of Major/Essential
Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/No
t1 Radiator model 1986 In good condition
2 Electrical equipment board(Car) 1986 In good condition
3 Epicyclic Gear 1956 In good condition
4 Sectional-4 Cycle Petrol Engine Nodel Craft 1986 In good condition
5 Gear Box ’’ 1976 In good condition
6 Clutch Assembly(Model) ’’ 1976 In good condition
7 Motor Engine(4 Cycle) Dismantled 1965 In good condition
8 Perkins P6 Diesel Engine(Dismantled) Perkins ltd. 1965 In good condition
9 Station Wagon Car petrol(old)V-V 1965 Partially Condition
10 Wheel alignment apparatus 1985 In good condition
11 Mechanical Brake System 1986 Partially condition
12 Fuel Supply System of diesel engine model 1986 Partially Condition
13 Motor car Steering model 1986 Partially Condition
14 Differential gear model 1986 In good condition
15 Hydraulic brake unit model 1986 Partially Condition
Name of the Laboratory:- CNC S.No. Name & Specification of Major/Essential
Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 CNC Trainer Lathe (Under 3D Technologies 2008 In good condition
30Signature of the Authorized Signatory of Society /Trust/Applicant with date
MODROBS)2 TOOLMAKER MICROSCOPE (Under MODROBS)
Name of the Laboratory:- Material ScienceS.No. Name & Specification of Major/Essential
Equipment required for conduction of practical’s as per curriculum
Manufacturer Name
Year of Purchase
working condition/Not
1 Hot/Cold air blower model hcab-I,220 volt,AC “Censiomake”Model MM-V
1984 In good condition
2 Metallurgical microscope Cenisco 1985 In good condition
3 Single disc polishing machine Model, PMV-P-8-IV,Dry belt surfaces 0.5 HP;220 volt,AC
1985 In good condition
WORKSHOPS
PATTERN SHOP
Name of equipment QuantityCompass saw 9Tennon Saw 18Cut Iron 108Firmer Chiesel 72Brace 3Hand Drill 2Auger bit 12Oil 24Bhasola 12Tri square 48Firmer Gauge 3Triangular file 4”, 5”, 6” 210Rasp File 11Screw driver 39Pincer 10Ball pin hammer 4Cross pin hammer 12Half round file 50Flat file 65Locks 20Foot rules (wooden) 9Bevel tri square 18Gauge chisel 33Wood lathe tool Chiesel 4Work bench 4
31Signature of the Authorized Signatory of Society /Trust/Applicant with date
Carpentry vice 16Wooden smoothing plane body 11Spray unit with gauge 1 setWood turning lathe 3Chain mortise m/c 1Sheever m/c 1First-aid box 1Air compressor 1Carpentry cramp 2Mortise gauge 12Marking gauge 12Drills 1 setClaw hammer 6Bradauren 12Half round file 12Rabbit plane(wooden) 6Rabbit plane (steel) 3Jack plane 26Plough plane 1Compass plane 1Grooving plane 1Spoke shave 9Grinding wheel 2Bevel chisel 24Portable electric sander 1Steel tape 2Oil cane 1Center drill bits 24Round files 24Rose bits 6Lathe tools 2 setFoot rule( iron) 27G- clamp 12Brace bits 121Glue pot 2Portable type weighing m/c 1Indian drills 7Glass cutter 1Electric soldering iron rod 1Divider 2Spring compass 6
FORGING SHOP
32Signature of the Authorized Signatory of Society /Trust/Applicant with date
Name of Equipment QuantityLeg vices 6” jaw 2Swage blocks 1Smithy set 2Blower power driven 1Anvils 13Blower belt driven 1Tongues 12Chisel 6” 7Flatter 1Wooden almirah 1Spring power hammer 1
FITTING SHOP
Name of equipment QuantityBench vice 4” 30Bench vice 5” 15Bench vice 6” 10Hand vice 2” 4Surface plate 10X10 1Surface plate 18X 24 1Surface plate 18X 18 1Hammer half pound 2Hammer of sort 8Ball pin hammer 24Ball pin hammer 1 pound 2Chisel 5” 7Hacksaw frame 12” 23Scribing block 1Ring spanner3/8” to 1” 6Socket set ½ “ to 15/16” 6Figure set 1/8” 1Steel rule 6” 30Flat file bastard 10” 113Flat file smooth 10” 87Flat file nickelson 10” 6Flat file bastard 12” 150Flat file rough 5” 11Flat file smooth 5” 17Slim taper 5” 2Slim taper 2” 2Round file 10” bastard 24Round file 10” smooth 2Half round file 10” 45
33Signature of the Authorized Signatory of Society /Trust/Applicant with date
Half round file 6” 66Square file 10” 20Square file 6” 27Square file ¼ “ 2Knife edge flat file 4” 6Knife edge flat file 6” 2Work bench 6Almirah wooden 1Godrej pad lock 1Godrej mohar pad lock 1Tiger lock 2Click lock 2Triangular file 4” 12File engraver 1Round file 6” 7Tri square 6” 25Godraj nav-tal 1Bench drilling m/c 2BSW die stocks and taps ¼”-1” 1 setBSW dies 5/16” 2Die handle 1Hand Taps BSW 3/16”, ¼”, 5/16”, 3/8 “, 1 setDie 3/8” BSW 6Die ½” 8Adjustable handle 3BA stocks , dies and taps 0- 10 No. 1 setVernier slide gauge 5/12” 1Filler gauge 25 blades 1Thread gauge 1Depth gauge 6” 1Radius gauge 1Angle plate 4X4 1 Drill 1/8”, 5/16”, 25/64” 3Drill 5/16”, 25/64”,35/64” 3Vernier caliper gauge 1/1000” 2File 6” 16Scale file 8”,10” 12
Round file rough 6” 5Round file smooth 6” 2Height gauge 12” 3Marking block universal 12” 6Face plate 2Triangular file 6” 10Triangular file 8” 24Triangular file 5” 13Micrometer 0-25 mm 1Inside micrometer 25-50mm 1
34Signature of the Authorized Signatory of Society /Trust/Applicant with date
Outside micrometer 0-25mm 4Dial indicator 1magnifying glass 2” dia nickel plated 2Kassi superior general type ¾ “ cap Indian made bench drilling m/c having 8 spindle arrangement with starting standard without motor and chucks I horse power motor 1430 rpm and machinery manufacturer 2 T.O Calcutta
1
File brush 2Drill chuck jack type ½” 3Drill sleeves 2-3,1-4 2Drill socket 203 No. 2Drill key ½ “ capacity 1Pelicken metal bend saw m/c with accessories and filing m/c
1
Oil canes 2Drill 1/8”, ¼”,5/16” 5Drill 5/32”, 3/8”, 7/16”, ½ “ 4Drill 3/64”,23/64”, 27/64” 3 each
4 setTap handle 5Tap ¼”,5/16” 2 set Tap 3/16” 1 setBSW hand tap set 1/8” -1/2” of warrior best India 3 settriangular file 8” 24BSF dies nut round 3/16”,1/4”,5/16” ,3/8” 1setDie stock 1” ,1/2” 1 setDie stock 13/16” with handle 1 set
FOUNDRY SHOP
Name of equipment QuantityMoulding box CI 16”X12” 2 pcsMoulding box CI 14”X8” 1 pcsMoulding box CI 12”X12” 3 pcsMoulding box 6”X6” 1 pcsCupola furnace 1 pcs
ELECTRIC SHOP
Name of equipment QuantityCombination plier 17
35Signature of the Authorized Signatory of Society /Trust/Applicant with date
Long nose plier 2Screw driver 10” 2Screw driver 8” 3Screw driver 4” 45Screw driver 6” 10Projector 16mm 1 setTubler pole 5Shackle insulator 4Kassi with handle 2Pick axe 1Pen tester 2Soldering iron 1Electric prees 1Hand drill m/c 13 phase star delta starter 1Electric bell 1Room heater 2Tube lights 8Locks 4Push button switch 1Energy meter 1Torch 1D C dynamo 1Engineering machine 1Coil winding m/c 1Vacuum plant 1Gloves 1Die 1Siemens air brakers 1Water heater 2Rasp file 6” 2Triangular file 6” 2Bench vice 4 -1/2” 1Bench vice 10 m 1Hydrometer 1Table fan 1Battery charger 1micrometer 1
PLUMBING SHOP
Name of equipment Quantitypipe die ½ “ complete 2pipe die ½ “ complete 2Pipe stake and die ¼”-2” ratchet type 1 set
36Signature of the Authorized Signatory of Society /Trust/Applicant with date
Pipe die handle ¾” 11-1/2” chaser (two pieces) 1set½” die chaser 1setPipe handle 4 setHydraulic pipe bending m/c 1Pipe vice 9Hacksaw frame 5Oil cane ¼ 2Pipe wrench 14” 5Pipe wrench 18” ,14”,12” 10” 6Measuring steel tape 6” 1Chain wrench 1Adjustable spanner 1Spirit level 12” iron 6Drill bit ½”,3/4”,1” 3Hand saw 12” 6Ball pin hammer 6Screw driver 10” 6Rasp file10” 2Cutting plier 3Gas plier 6” 2Plumbiale 4Taps1/2”,3/4” BSP 2 setPipe die set 1- ¼” 13 wheel pipe cutter 3Engineering ratchet 1Pipe wrench 10/8”,12/2” 8Pipe wrench 12” 5Locks 5Spanner set (6 pieces) 1Spanner 1Screw spanner wrench 12” 1Bath tub 1RCC pipe 10m 10mPipe axe 5Kasses 1Drills 5/16” 4+3Foot rule 12” 6Water meter NO. 0491046 1Compass 6” 3rough file 12” 3Chain wrench 2” 2Screw spanner 10” 4Pipe die ½ “- 1” 1 setBlow lamp 1Pipe wrench 18” 1Pipe wrench 14” 1Screw driver 10” 2
37Signature of the Authorized Signatory of Society /Trust/Applicant with date
Low level cast iron 3 gallon 1Models
1) slow sand filter2) sedimentation tank3) floucculator4) trickling filter5) for filtration
11111
TURNING /MACHINE SHOP
Name of equipment QuantityMilling m/c bench type 1Power press 1Planner 1Transformer 1Fore jaw 8” chuck 1Lathe carrier (ORD) 10Screw driver (plastic) 4Plier 3Adjustable wrench 2Drill sleeve No. 2-3 3Drill chuck ORD CAP,1/2” 5Drill chuck (jack type) 1Tri square 6” 1Ring spanner3/8” 1Word set 1Spirit level 2Diamond tool 4Mug 1Screw driver(wooden handle) 4Flat file 10” smooth 14Flat file 6” smooth 2Half round 5” 1Half round file 6” smooth 6Half round 6” bastard 3Round file rough 6Round file smooth 4Knife edge file 1Steel rule 6” 40Plumber block 10Main shaft 2 ½” 60 ftPaint brush 6Hacksaw frame 1Pulleys 20
38Signature of the Authorized Signatory of Society /Trust/Applicant with date
Oil cans 16Lock godrej 3Iron lock 13Hand tap BSW ¼ “ 2 setHand tap 5/16" 1 setHand tap 3/8” 2 setHand tap ½ “ 1 setSpanner set 10 setFigure set 3 setSurface gauge 4Steel tape 50”,6” 2Bulb holder 14Switch 30 amp 1Switch socket 5 amp 3File brush 2Towel 1Dial indicator 1Tool holder 3/8” 5
COMPUTING FACILITIES: Yes Number and Configuration of Systems 130
Total number of systems connected by LAN
Total number of systems connected to WAN
Internet bandwidth 512 kbps
Major software packages available Yes
Special purpose facilities available
WORKSHOP: Yes List of facilities available.
Games and Sports Facilities YES
Extra Curriculum Activities YES
Soft Skill Development Facilities YES
Number of Classrooms and size of each 15 and 66 SQM. Each
Number of Tutorial rooms and size of each 4 and 33 SQM.
Number of laboratories and size of each 02 and 66 SQM.
Number of drawing halls and size of each 06 and 132 SQM. Each
Number of Computer Centres with capacity of each 05 and 100 SQM.
39Signature of the Authorized Signatory of Society /Trust/Applicant with date
Central Examination Facility, Number of rooms and capacity of each. YES auditorium of 1000 sitting
capacity
Teaching Learning process Curricula and syllabi for each of the programmes as approved by the University. Yes
Academic Calendar of the Board Yes
Academic Time Table Yes
Teaching Load of each Faculty Yes
Internal Continuous Evaluation System and place Yes
Students' assessment of Faculty, System in place.
40Signature of the Authorized Signatory of Society /Trust/Applicant with date