NEWproaucts
water or process requirements makefoam control difficult. These fluidsprovide superb wetting characteristics to maintain equipment, toolingand part cleanliness.
Multan B Series lubricants reduceoverall processing costs, maximizetool life and productivity, while eliminating smut and buildup on machineinteriors, tools, and finished parts.These products leave behind a verylight film residue after machining orgrinding is complete to protect partsduring storage. For more information, call (248) 583-9300, [email protected],or visit www.henkelna.comjmultan.
Circle 404 on reader service card
CENTRIFUGAL PUMPSGriswold PumpCo., manufacturer ofANSI centrifugal pumps, now offersits 811 Series ANSI line of pumpswith enhanced power frames that not
only increase performance andlongevity but also simplify maintenance. The improved strength andrigidity of the 811 Series power framesare an estimated 33% stronger thancompetitive models , making them better equipped to withstand severe conditions found in paint and coatingprocesses and transfer applications.
The 811 Series offers a full range ofpump sizes, as well as options andupgrades that can be tailored to meetvirtually any fluid-processing application with flow rates up to, andincluding, 908 m3jh (4,000 gpm).Among the 811's features are the
lNWW.metalfinishing.com
availability of both standard andlow-flow models, heavy-duty powerframes, fully open impellers with rearadjustment capability, and a widevariety of mechanical-seal options.811 Series pumps are available withductile iron, 316 stainless steel,CD4MCu and Alloy 20 liquid paths,which make them viable in temperatures as high as 260°C (500°F). All811 Series pumps undergo extensivehydro testing before being deliveredto the customer. For more information, visit www.griswoldpump.com.
Circle 405 on reader service card
COLOR CARDSPPG Industries has published colorcards for its Duranar ULTRA-Cooland Superl II ULTRA-Cool coatings.Duranar ULTRA-Cool coatings formetal roofs feature a polyvinylidenefluoride (PVDF) coating system thatoffers higher solar reflectivity thancompeting products. The color carddepicts 24Iight-, medium-, and darkcolored coatings, including sixpearlescent tones. Many are registered with Energy Star and the CoolRoof Rating Council (CRRC).
Superl II ULTRA-Cool siliconepolyester coatings are formulatedwith a proprietary resin technologyand innovative formulation processthat provide better chalk, fade, corrosion, and moisture resistance thanavailable with other silicone-polyester coatings. The new color cardshows 20 color options, from jetblack to polar white, that are available in a full range of gloss options..Download color cards at the PPGwebsite or order hard copies atwww.requestppg.com.
Circle 406 on reader service card
ORIFICE FLOWMETERABB Instrumentation has cut thecost of installing orifice-plateflowmeters by up to half with thelaunch of its OriMaster compact orifice DP flowmeter. The latest inABB's new FlowMaster range, theOriMaster is a one-piece flowmeterthat comes fully factory configuredand pressure tested, solving many ofthe problems associated with sizing,selection, installation, and operation
of conventional orifice plate installations. The OriMaster combines allthe major components needed for anorifice plate installa tion in oneassembly and is suitable for clean liquids , gases and steam applications inline sizes from 1 to 8 inches (DN25to DN200) and at pressures up to1450 psi (100 bar).
ABB offers two orifice bores foreach pipe size, simplifying theselection process. The flowmetercomes in rwo versions: one for volumetric readings (OriMasrer V)and the other for mass flow(OriMaster M). OriMaster V suitsgeneral purpose volume measurement, featuring a stainless steel
transmitter housing and meterbody. It provides an optional flowrate and total display as well as ananalog output. OriMaster M provides measurements directly inmass or corrected volume units. Ituses ABB's 267CS multivariabletransmitter to measure differentialpressure, temperature, and pressure, and provides an optional display and analog output. For moreinformation, call (800) 829-6001 orvisit www.abb .comjinstrumentation.
Circle 407 on reader service card
DISPENSING VALVETridak's new Model 455 dispensingvalve is a pneumatically operated,two-way pinch valve. It featuresmicrometer control over the flow
October 2009 I metalfinishing I57
NEWproClucts
rate, ensuring that materials are dispensed repeatedly and accurately.The Model 455 valve has a patentedover-stroke adjustment, positiveshut-off, and disposable inert wettedparts, enabling users to obtain millions of cycles from a single piece oftubing. This valve can be used as adispense valve or as an in-line, twoway (on-off) valve with adjustableflow. Teflon tubing is the recommended standard for this valve, butit can be quickly converted to useother tubing materials, such as silicone, urethane, polyethylene, or vinyltubing.
The Model 455 dispensing valvewasdesigned to be easily integrated intoautomated assembly lines and can befitted with a number ofdifferent styledispense tips and spray nozzles. Thisvalve can dispense a large assortmentof low-to-medium viscosity materialsincluding adhesives, UV resins, flux,gels, acids, sealants, cyanoacrylates,lubricants, paints, medical media, solvents, RTV, anaerobics, and alkalis.For more information, call (860) 6266700, e-mail [email protected]. or visitwww.tridak.com.
Circle 408 on reader service card
AIRlESS SPARGER SYSTEMCJI Processing System's AirlessSparger System provides vigoroussolution agitation in a customdesigned Anodizing Tank. CJI custom designs and fabricates anodizingsystems to accommodate any size
S8 I metalfinishing I October2009
part or basket of parts. Componentsare sized for each tank as required,depending on Anodizing ChromicAcid Type I, Sulfuric Anodize Type II,or Hard Coat Anodize Type III.Pumps, valves, and eductors are carefully calculated for each application,as well as heaters, controllers, coolingcoils or grids, chillers, and rectifiers.
Copper cathode and anode bussingis calculated to handle the maximumamperage with the least voltage drop.All wetted components are chosencarefully, for chemical compatibility.CJI Process Systems engineers designand fabricate single anodizing tanks,100 gallons or smaller, to large 5,000gallon fully automated anodizingtank process or coating systems, withsingle or multiple programmedhoists. CJI is committed to buildingworld-class equipment for worldclass customers-guaranteed! Formore information, please visitwww.CJIProcessSystems.com.
Circle 409 on reader service card
VACUUM LIFTERAnver Corp. has introduced a custom vacuum lifter for pick-and-placesystems handling ultra-thin sheets offoils, films, and glass that is designedto prevent puckering and surfacedamage. The Anver VPF-57 CustomVacuum lifter for delicate sheetsfeatures multiple double spring-
loaded suspensions with soft rubberaccordion-style vacuum cups forhandling sheets of foils and filmsdown to 26 gauge, and glass.Designed for pick-and-place applications, this lifter has fully adjustablecross arms with shut-off valves toprovide optimum setup flexibility.
Available with air- or electric-pow-
ered vacuum generators, the AnverVFP-57 is equipped with an integrated vacuum guard system and hasaudio-visual safety alarms, in theevent of a malfunction, and includesparking stands to keep the vacuumsuction cups from touching thefloor. This custom lifter can alsoinclude remote controls for manualsheet handling. For more information, contact Scott Dillon at (800)654-3500, e-mail sdillonwanver.com,or visit www.anver.com.
Circle 410 on reader service card
VOC-FREE RHEOLOGY MODIFIERCognishas developed the DSX 3000series in response to the marketdemand of ecologically compatibleproducts being fully in line with sustainability and performance. It is aunique range of patented nonionicassociative thickeners for waterbased coatings. With rheology modifiers from Cognis, it is possible tocreate a wide variety of rheologicalprofiles: from Newtonian for brushand roller coatings to highly pseudoplastic for sprayable coatings. Easierhandling and optimized applicationproperties like good spatter and sagresistance can be assured.
The latest addition to Cognis rheologyseties is DSX3291, a highly efficientinnovative associative thickener for"green" water-based architectural coatings. It is an excellent pseudoplasticviscosity builder which is up to fivetimes more efficient than conventionalassociative thickener products. DSX3291 is easy to handle and can beincorporated into coating formulations with low shear mixing. DSX3291is suitable for all types of paints, suchas premium flat and eggshell, semigloss and gloss architectural coatings,and industrial paints. For more information, visit www.cognis.com.
Circle 411 on reader service card
HIGH-TEMPERATURE COATINGSA high-build, high-temperature coating system for protecting carbonand stainless steel surfaces from CUI(corrosion under insulation) andatmospheric corrosion is availablefrom Dampney Company, Inc.Dampney Thurmalox 225HD
www.metalfinishing.com