Distributed EnergyDistributed Energy2G2G®® Cogeneration CHP Cogeneration CHP

TechnologiesTechnologies

Smart DecentralizedSmart DecentralizedEnergy GenerationEnergy Generation

63%

33%

33%

8 ~ 10%

43 ~ 51%

38 ~ 41%

81 ~92%

Increasing Energy EfficiencyIncreasing Energy EfficiencyCHP – Combined Heat & PowerCHP – Combined Heat & Power

Source of Information: U.S. EPA and The Department of Energy

The Department of EnergyThe Department of Energyand EPA Targetsand EPA Targets

According to Studies published by the Department of Energy and the EPA,… Combined Heat & Power (CHP) Concepts (including Tri-Generation / Cooling) that efficiently integrate Distributed Power Generation with thermally activated Technologies (TAT) reduce Stress on the National Electric Grid caused by Peak-Power-consuming HVAC Systems.

More efficient Use of our Energy ResourcesMore secure against natural and Man-made DisastersReduced Pollution

Benefits:

This Illustration further highlights the Benefits and Possibilities of Distributed Energy at the Grid Level. European Countries are now actively improving their Grids with extensive CHP Interconnections. Small first Steps in the US are showing an increasing Interest in developing a Smart Grid in North America.

Smart Grid IntegrationSmart Grid Integration

CHP DevelopmentCHP Development

CHP is not new in North America. The 1980’s saw a rapid growth of CHP Capacity in the United States. Installed Capacity increased from less than 10 Gigawatts electric (GWe) in 1980 to almost 44 GWe by 1993. Most of this Capacity was installed at large industrial Facilities such as Pulp and Paper, Petroleum, and Petrochemical Plants. These Plants provided a “Thermal Host" for the Electric Generator.

For many Years CHP Cogeneration has been a complex Issue that involves an Army of Engineers, Consultants, Suppliers, Contractors and Subcontractors.

Every Installation is individually specified, designed, engineered, and Components are generally installed and first-time tested jointly on-Site.

Small CHP Installations have been a very rare Exception.

That’s the Past! Todays Technologies are making Natural Gas CHP much easier.

A smart, less complicatedA smart, less complicatedand much more Cost-Effective Solutionand much more Cost-Effective Solution

Our SolutionOur Solution

Our CHP Cogeneration TechnologyOur CHP Cogeneration Technology

Our CHP Equipment is supplied:

All Inclusive – One Package

Fully Factory Tested

Connection Ready

For Inside Installation For Outside Installation

One Stop – One SourceNo Need to invent the Wheel again Proven DesignFunctionality is guaranteedMore than 3000 Units in Operation

Practical, Functional, and StandardizedPractical, Functional, and Standardized

Easy to Transport – Easy to Install – Easy to Maintain

A complete“All-In-One”

Package Module with one general

consistent Factory Quality Standard.

Our “Factory Package” Project ApproachOur “Factory Package” Project Approach

Chillers / Trigeneration

Special Gas Train &Regulation Requirements

Gas Treatment

Fuel Processing / Treatment LV & HV Switch Gear Control Systems Installation Service Maintenance Contracts

We are specialized in offering complete Factory Package Cogeneration Solutions.

Cogeneration Module

Special Cooling Requirements

Transformers

The Base CHP ModuleThe Base CHP Module

Pump & CirculationCompartment

Electronic ControlSection

Heat ExchangerCompartment

Heat Exchanger Compartment includes Gas

Supply & Gas Train / Regulation

Pump & CirculationCompartment

Electronic ControlSection

Heat ExchangerCompartment

Special Sound AttenuatedEnclosure for Inside Installation

The Base CHP ModuleThe Base CHP Module

Containerized CHP ModulesContainerized CHP Modules

Fully Containerized & Sound Attenuated Cogeneration CHP Modules

The entire CHP Cogeneration Plant in one Container.

Containerized CHP ModulesContainerized CHP Modules

Available in various Sizesand Configurations.

Very easy Transportationand Installation.

Attention to Detail, perfectly engineered,practical and functional. Top Quality.

Containerized CHP Modules – Everything IncludedContainerized CHP Modules – Everything Included

““Plug and Operate” – Smart and Cost-EffectivePlug and Operate” – Smart and Cost-Effective

Standard Connections and Termination is used throughout, to minimize the Installation Effort. All Units are designed for extreme fast Connection and very easy Operation.

Gas In

Water Circulation Connections

ExhaustGas Out

CHPControl

We have simplified the Implementation of Cogeneration Systems, by integrating all CHP Components into one Unit (All-In-One).

The FutureThe Future

2G CHP Cogeneration Systems are ideally suitedto build a Network of Distributed Energy Stationsand to contribute towards the Smart Grid.

Distributed Energy - Our Product FocusDistributed Energy - Our Product FocusNatural Gas – CogenerationNatural Gas – Cogeneration

Distributed Energy, decentralized CHP (Combined Heat & Power) Solutions for Natural Gas Applications in various Industries.

Our 2G® combined heat and power (CHP), also known as co-and tri-generation solutions, are an efficient, clean, and reliable approach to generating power and thermal energy from a single fuel source. By installing a CHP system designed to meet the thermal and electrical base-loads of a facility, cogeneration can greatly increase the overall operational efficiency and decrease energy costs. At the same time, CHP reduces the emission of greenhouse gases.

Natural Gas Cogeneration

High Efficiency Solutions !

Our Area of ExpertiseOur Area of Expertise

Decentralized Clean Energy SolutionsDecentralized Clean Energy Solutions

In Addition to smart Natural Gas CHP Cogeneration Solutionswe are also focusing on Biogas – Renewable Energy Conversion.

Our Product Focus – BiogasOur Product Focus – Biogas

Dairy Farm & Cattle Industry Pig Farm Industry Chicken & Poultry Farm Industry Agri Waste - Silage & Biomass

Organic Compost

Organic Waste

Food Processing Waste

Our advanced 2G® biogas energy generation technology utilizes the fermentation process (anaerobic digestion) in natural biodegradable materials to generate electricity and heat using a fuel that is both efficient and environmentally friendly. A mixture of methane (CH4) and carbon dioxide (CO2) provides sufficient calorific value to operate our modern biogas cogeneration plants. A clean and economical alternative to fossil fuels; highly efficient, eco-friendly, with many economic benefits.

Biogas Cogeneration

We provide Anaerobic Digester Developers, Builders, Operators, and the entire Biogas Industry with highly efficient and cost-effective Cogeneration CHP Solutions.

Our Area of ExpertiseOur Area of Expertise

Our Product Focus – Landfill Gas - LFGOur Product Focus – Landfill Gas - LFG

Many Landfills don’t utilize their Methane Gas Source. Its simply flared / burned. Valuable Energy is wasted.

Waste to Energy ! Our advanced 2G® landfill gas (LFG) energy generation technology utilizes the bacterial decomposition process of organic material contained in landfills to generate electricity and heat using a fuel that is both efficient and environmentally friendly. A mixture of methane (CH4) and carbon dioxide (CO2) provides sufficient calorific value to operate our modern biogas cogeneration plants, and offers a clean and economical alternative to fossil fuels.

Landfill Gas Cogeneration

We provide LFG Developers, Contractors, Landfill Operators, and the entire LFG Biogas Industry with highly efficient and cost-effective Cogeneration CHP Solutions.

Our Area of ExpertiseOur Area of Expertise

Our Product Focus – Sewage Gas – WWTPOur Product Focus – Sewage Gas – WWTP

Our advanced 2G® sewage gas energy generation technology utilizes the anaerobic digestion process, and biogas is produced by the digestion and incineration of sewage sludge. Sewage gas is typically composed of methane (CH4) and carbon dioxide (CO2), with traces of other gases. This type of biogas can be utilized to generate electricity and heat. The gas provides sufficient calorific value to operate our modern cogeneration plants.

Sewage Gas Cogeneration

Many Wastewater Treatment Plants don’t utilize their Methane Gas Source. Valuable Energy is wasted !

Generate Energy !

We provide Wastewater Sewage Developers and Treatment Facility Operators, with highly efficient and cost-effective Sewage Biogas Cogeneration CHP Solutions.

Our Area of ExpertiseOur Area of Expertise

Our Product Focus – Coalmine GasOur Product Focus – Coalmine Gas

Coal Mines have a great Potential to generate significant Income from Coal Gas Utilization.

Electricity

CarbonCredits &Offsets

Heat

Our innovative 2G® coalmine gas cogeneration technology helps to dispose coalmine gas by harnessing it as an energy source, avoiding the release of methane. It is widely acknowledged that Coal Bed Methane (CBM) can provide a valuable source of clean energy. 2G® coal mine gas CHP plants provide an effective and safe way to generate electricity and heat. Our advanced technology is designed to cope with extreme gas quality and quantity fluctuations.

Coalmine Gas Cogeneration

We provide Mine Operators with highly efficient Energy and CHP Solutions.

Our Area of ExpertiseOur Area of Expertise

Our Product Focus – Wellhead GasOur Product Focus – Wellhead Gas

Many Gas Fields and Wellheads don’t utilize their Methane Gas Source. Its simply flared / burned. Valuable Energy is wasted.

Wellhead Gas to Energy !

Our advanced 2G® gas energy generation technology utilizes the natural gas reserves contained in gas wells, using a fuel that is both efficient and contains sufficient BTU for power generation . A mixture of methane (CH4) and Nitrogen (N22) provides sufficient calorific value to operate our modern gas cogeneration plants, and offers a clean and economical alternative to just flaring the gas.

Wellhead Gas Power & Cogeneration

We provide Developers, Contractors, Gas Field Operators, and the entire Natural Gas Industry with highly efficient and cost-effective Cogeneration CHP Solutions.

Our Area of ExpertiseOur Area of Expertise

Gas

Distributed Energy - Our Product FocusDistributed Energy - Our Product FocusNatural Gas – CogenerationNatural Gas – Cogeneration

Distributed Energy, decentralized CHP (Combined Heat & Power) Solutions for Natural Gas Applications in various Industries.

Our 2G® combined heat and power (CHP), also known as co-and tri-generation solutions, are an efficient, clean, and reliable approach to generating power and thermal energy from a single fuel source. By installing a CHP system designed to meet the thermal and electrical base-loads of a facility, cogeneration can greatly increase the overall operational efficiency and decrease energy costs. At the same time, CHP reduces the emission of greenhouse gases.

Natural Gas Cogeneration

High Efficiency Solutions !

Our Area of ExpertiseOur Area of Expertise

EPA RecognitionEPA Recognition

The EPA (U.S. Government Environmental Protection Agency) approved 2G CENERGY ® as Partner, assisting the Agency in their Efforts to implement CHP Technologies in the US.

2G CENERGY® has also been approved as Partner for the EPA Coalbed Methane and Landfill Methane Outreach Programs.

Engines designed and built for BiogasEngines designed and built for Biogas

If these Differences are not considered and an Engine has not been specificallydesigned for Biogas, operational Dependability will be an Issue.

We provide Engine Technologies that are made for Biogas.This assures Reliability, Durability, High Efficiency, and Low Maintenance.

Natural Gas

Biogas

The chemical Composition of Biogas is not identical to Natural Gas.Gas Treatment results in Approximation, but there remains a Difference.

CH 4

CH 4

Why are 2G Engine Technologies moreWhy are 2G Engine Technologies moreadvanced and perfectly suited for Biogas ?advanced and perfectly suited for Biogas ?

Gas Flow Optimization

Optimized ThrottlePosition

Optimized Exhaust Manifold

Improved Intercooler

Specially designedABB Turbo

Why are 2G Engine Technologies moreWhy are 2G Engine Technologies moreadvanced and perfectly suited for Biogas ?advanced and perfectly suited for Biogas ?

Why are 2G Engine Technologies moreWhy are 2G Engine Technologies moreadvanced and perfectly suited for Biogas ?advanced and perfectly suited for Biogas ?

Especially developed for weak and corrosive Biogas (incl. Metallurgical Optimization)

Optimized Gas Mixer

Components for optimizedComponents for optimizedCombustion Chamber GeometryCombustion Chamber Geometry

Patented Tri-Flow Piston GeometryPatented Tri-Flow Piston Geometry for optimized Combustionfor optimized Combustion

Drive Technology

Our proprietary & patented

Engines designed and built for highlyEngines designed and built for highlyefficient Natural Gas & Biogas Combustionefficient Natural Gas & Biogas Combustion

®

Our proprietary Engine Technology enables us to distinguish 2G® from the Competition, to provide Customers with higher Efficiency, and to maintain a Leadership Position.

Practical, Functional, and StandardizedPractical, Functional, and Standardized

Reliability & DurabilityReliability & Durability

First Major Overhaul 60,000 HoursFirst Top-End Overhaul 30,000 Hours

Controls / SwitchgearControls / Switchgear

Advanced Switchgear andControls are fully integratedComponents for all Power

Modules.

StandardsStandards

Designed and manufactured in an ISO 9001 compliant Facility

Equipment meets or exceeds international Specifications:

ABGSM TM3, AS1359, AS2789, BS4999, BS5000, BS5514, DIN6271, DIN6280, EGSA101P, IEC34/1, ISO3046/1, ISO8528, JEM1359, NEMA MG 1-22, VDE 0530, 89/392/EEC, 89/336/EEC

TÜV, VDE, an CE certified, UL compliant

Continuous Output available without varying Load for an unlimited Time in accordance with ISO8528, ISO3046/1, AS2789, DIN6271, and BS5514

Ratings and Fuel Consumption are based on ISO3046/1 Standard Reference Conditions of 25 °C (77 deg F) of Ambient Temperature and 100 kPa (29.61 in Hg) of total barometric Pressure, 30% relative Humidity with 0, +5% Fuel Tolerance.

Emmissions:

TA-Luft 2009 / Euro Tier 5 and 6 Standards (2009/2014)U.S. EPA Compliant

Service & Product SupportService & Product Support

We are providing Service & Maintenance through our Network of Factory trained and authorized 2G® Service Stations, as well as through a Network of strategically positioned Factory owned “Rolling Workshops” throughout the US.

Service Support & Remote Control

Service & Product SupportService & Product Support

Our North-and South American service headquarter, is organizing all service support issues. The primary parts distribution warehouse is located at the 2G factory in St. Augustine (Jacksonville), Florida, USA. This location allows us to more easily meet our United States, Central & South American customers growing demands for technically advanced and environmentally responsible energy system.

Irrespective of the customer location, 2G CENERGY® will guarantee a high standard service & product support through a network of partners specialized in technical support.

CHP Cogeneration InstallationsCHP Cogeneration Installations

2G CHP Cogeneration Installations

2G North & South American CHP Cogeneration Projects in Progress

More than 3000 CHP Systems installed

The 2G Factory in the USAThe 2G Factory in the USA

US Factory – St. Augustine, FLUS Factory – St. Augustine, FL

The EndThe End

This is the End of our brief Company Presentation.

Thank You !

For any Questions and more Info:

2G CENERGY Power Systems Technologies Inc.205 Commercial Drive

St. Augustine, FL 32092 – USATel.: +1-904-579-3217Fax: +1-904-406-8727

E-Mail: info@2g-cenergy.com

Visit our Website at: http://www.2g-cenergy.com