+ All Categories
Home > Documents > Distribution Line Earthing · P&B Weir Electrical is a UK-owned and operated company providing...

Distribution Line Earthing · P&B Weir Electrical is a UK-owned and operated company providing...

Date post: 23-Aug-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
1
PBSI Group Limited Registered Office, Belle Vue Works, Boundary Street, Manchester, M12 5NG Company No. 2030212 Cardiff P&B Weir Electrical, Unit 1, Leafield Way, Leafield Ind. Est., Corsham, Wiltshire, SN13 9SW, UK T: 0044 (0)1225 811 449 F: 0044 (0)1225 810 909 E: [email protected] W: www.pbsigroup.com P&B Weir Electrical is a UK-owned and operated company providing leading technology electrical system solutions to Industrial and Utility customers worldwide. The Distribution Line range of portable earthing equipment is suitable for temporary earthing of conductors within the range 11 to 66kV. The LV earthing kits can be made to suit most applications and specific requirements. Single phase, 3-phase 3, 4 or 5 wire assemblies. The LV Earthing Kits employ S9B conductor clamps fitted with PVC operating handles for overhead conductor sizes from 3.0 to 27.0mm diameter. Single phase, 3-phase 3, 4 or 5 wire assemblies, which can be assembled using the appropriate number of clamps and interconnecting leads, to provide portable shorting kit. The S9B line end clamp is tested to 17.5kA for 2 seconds, although the short circuit withstand level of the complete assembly is dependent on the size of the interconnecting lead used. Typically, a 50mm 2 lead will withstand 8kA for 1 second. The cable sheath is available in clear PVC or opaque orange Arctic grade PVC to protect the cable from corrosion or damage. Each interconnecting lead is fitted with compression terminal lugs, having PVC sleeves over the lug and cable to provide mechanical support. The length of the interconnecting lead is usually 1.5m, but any length can be provided to suit a particular application. PVC carrying bags are available to accommodate complete assemblies. Product Benefits P&B Weir Electrical Products Quality Assurance PBSI Group Limited Registered Office, Belle Vue Works, Boundary Street, Manchester, M12 5NG Company No. 2030212 Cardiff P&B Weir Electrical, Unit 1, Leafield Way, Leafield Ind. Est., Corsham, Wiltshire, SN13 9SW, UK T: 0044 (0)1225 811 449 F: 0044 (0)1225 810 909 E: [email protected] W: www.pbsigroup.com Distribution Line Earthing LV Earthing Kits Solid construction for extended service Proven service record used by ESI for over 40 years Light weight and good corrosion resistance
Transcript
Page 1: Distribution Line Earthing · P&B Weir Electrical is a UK-owned and operated company providing leading technology electrical system solutions to Industrial and Utility customers worldwide.

PBSI Group Limited Registered O�ce, Belle Vue Works, Boundary Street, Manchester, M12 5NG Company No. 2030212 Cardi�

P&B Weir Electrical, Unit 1, Lea�eld Way, Lea�eld Ind. Est., Corsham, Wiltshire, SN13 9SW, UK

T: 0044 (0)1225 811 449 F: 0044 (0)1225 810 909 E: [email protected] W: www.pbsigroup.com

P&B Weir Electrical is a UK-owned and operated company providing leading technology electrical system solutions to Industrial and Utility customers worldwide.

The Distribution Line range of portable earthing equipment is suitable for temporary earthing of conductors within the range 11 to 66kV.

The LV earthing kits can be made to suit most applications and speci!c requirements. Single phase, 3-phase 3, 4 or 5 wire assemblies.

The LV Earthing Kits employ S9B conductor clamps

!tted with PVC operating handles for overhead

conductor sizes from 3.0 to 27.0mm diameter. Single

phase, 3-phase 3, 4 or 5 wire assemblies, which can

be assembled using the appropriate number of

clamps and interconnecting leads, to provide

portable shorting kit.

The S9B line end clamp is tested to 17.5kA for

2 seconds, although the short circuit withstand level

of the complete assembly is dependent on the size of

the interconnecting lead used.

Typically, a 50mm2 lead will withstand

8kA for 1 second.

The cable sheath is available in clear PVC or opaque

orange Arctic grade PVC to protect the cable from

corrosion or damage.

Each interconnecting lead is !tted with compression

terminal lugs, having PVC sleeves over the lug and

cable to provide mechanical support. The length of the

interconnecting lead is usually 1.5m,

but any length can be provided to

suit a particular application.

PVC carrying bags are available to

accommodate complete assemblies.

Product Bene!ts

P&B Weir Electrical Products Quality Assurance

PBSI Group Limited Registered O�ce, Belle Vue Works, Boundary Street, Manchester, M12 5NG Company No. 2030212 Cardi�

P&B Weir Electrical, Unit 1, Lea�eld Way, Lea�eld Ind. Est., Corsham, Wiltshire, SN13 9SW, UK

T: 0044 (0)1225 811 449 F: 0044 (0)1225 810 909 E: [email protected] W: www.pbsigroup.com

Distribution Line EarthingLV Earthing Kits

Solid construction for extended service

Proven service record used by ESI

for over 40 years

Light weight and good corrosion resistance

Recommended