Date post: | 08-Aug-2015 |
Category: |
Environment |
Upload: | michelle-trinidad |
View: | 129 times |
Download: | 1 times |
Materials for DIY Bird Feeder
1. Plastic soda bottle
2. Plastic plate – could be anything from a pot’s tray, disposable dining plate, ice cream tub lid
3. Wire or thick nylon/plastic string
4. Long nose pliers
Procedure
• Make a couple of holes on the plastic soda bottle’s bottom part, on the sides near the base – use sharp scissor to cut or use a hot metal (e.g. Old screw driver) to melt the plastic
• Make a couple of holes on the plastic plate
Backyardgardeningadventures.com
Backyardgardeningadventures.com
•Insert the wire on the holes on the plastic plate
•Place plastic bottle in the middle and secure the neck with the wire
Backyardgardeningadventures.com
• Add a mix of birdseeds and a handful of uncooked rice (or rice in hull if available)
Backyardgardeningadventures.com
• Hang the DIY bird feeder in your backyard garden and wait for the birds to drop by