Date post: | 20-Jun-2015 |
Category: |
Business |
Upload: | d-j-engineering-inc |
View: | 76 times |
Download: | 0 times |
Visit us www.djgrp.com
Call 316-775-2774
• D-J ENGINEERING INC
• D-J EXTRUDING
• D-J AEROSPACE
• D-J FAA REPAIR STATION
• D-J COMPOSITES
ABOUT US:
- DJE was established in 1992 supporting the Aerospace industry.
- DJE specialized in Manufacturing, Aircraft maintenance, repair and overhaul.
- DJE is globally located in 5 locations.
- DJE is 100% committed to Quality, On-time delivery, and Customer satisfaction.
Overview of SERVICES
INTRODUCTION TO DJ ENGINEERING INC. DJE is a premier manufacturer for complex machined Parts supporting Aerospace and Defense industries.
Machine Facts Center Category Description Size
6-Axis Jomach Horizontal – 7,500 RPM 1104" x 120" x 96"
6-Axis Jomach Horizontal – 7,500 RPM 1104" x 120" x 96"
5-Axis 360° Dual Head Independent “Y” Axis 4,500 RPM 720” x 160” x 55”
5-Axis 360° Dual Head Independent “Y” Axis 4,500 RPM
5-Axis 3 Spindle Gantry – 4,000 RPM 720" x 120" x 48"
5-Axis FZ-30-5 Bridge 360° Head – 18,000 RPM 160” x 112” x 40”
5-Axis 30V Rail 10,000 RPM 480" x 70" x 25"
5-Axis 30V Bridge 4,000 RPM 168" x 70" x 25"
5-Axis 800 7,000 RPM 80" x 36" x 36"
5-Axis PC 60/V 4,000 RPM 60" x 20" x 20"
5-Axis PC 120/V 4,000 RPM 120" x 50" x 36"
5-Axis SL-V50 Plus Waterjet
5-Axis Seramill 90° Head 4,000 RPM 315" x 93" x 39"
5-Axis Milling machine
5-Axis Milling machine
4-Axis HM-80S incremental dual pallet rotary table 15k RPM
4-Axis ACE-H100 dual pallet/dual table indexing 4500 RPM
4-Axis A77 incremental dual pallet rotary table 10,000 RPM
3-Axis VMC 4000GT-DW 2 Spindle 4,000 RPM 160" x 102" x 32.3"
3-Axis V3100 4000 RPM 120" x 39" x 32"
3-Axis High Velocity 4,500 RPM 240" x 36" x 30"
3-Axis 2000P 4,000 RPM 80" x 36" x 36"
3-Axis MCV-760BP 4,000 RPM 30" x 20" x 20"
3-Axis 100HP Dual Head Abrasive Flo-WaterJet
3-Axis TV 146 55" X 24" X 25"
D-J Engineering, Inc. CNC mills range in size from small 3-axis mills and lathes to huge 5-axis gantry machines, capable of producing parts up to 60’ in length. We have acquired and maintain a variety of equipment to ensure that we can produce nearly anything. Our large 5-axis CNC mills allow us to produce complex parts with fewer setups and increased accuracy. Our smaller 3-axis mills and our 4-axis pallet centers help to provide the right machine for those smaller parts with tight tolerances. We buy equipment strategically to not only add capacity, but also capability.
Machining/Milling
Large Cargo Freighter
Lower Fwd. Main Hinge
Raw Material: Stainless Steel
15-5 PH Forging: Approx. 7000 lbs.
Machined to 600 lbs. final product
50” Titanium Hog out
80” Long Hog out
15-5 PH Stainless Steel Engine Mount.
Machining/Milling
The Real Deal WIP
Assemblies D-J Engineering has completed assemblies such as the
B-52 Engine Strut, KC-135 Crew Entry Doors and Spoilers, FA-18 Blue Angel Oil
Tanks, the 767 Tanker/Transport Floor Beam Assemblies, and the Aerial Refueling
Boom Structure and Skins. As an “Integrator” D-J Engineering, Inc. has developed
a top-notch assembly team.
Assemblies
20 Sub Assemblies
• 170 Hardware Items
• 251 Detail Parts, consisting of:
- 25 Machined (casting, plate, bar, etc..)
- 67 Alum. Extrusions
- 110 Alum. Sheet Metal
- 7 Steel Sheet Metal
- 17 Items Purchased Complete (springs,
shims, etc…)
- 25 Misc. Manufactured Items (tubing, phenolic
sheet, etc..)
100% of the parts for both projects were fabricated in
house, using DJE owned resources exception to this rule
being painting and NDT.
Assemblies
100% of the parts for both projects were fabricated in house, using DJE owned resources exception to this rule
being painting and NDT.
Assemblies
100% of the parts for both projects were fabricated in house, using DJE owned resources exception to this rule
being painting and NDT.
Inspection & Quality assurance Our products fly.
Quality is non-negotiable.
As an ISO-9001 and AS 9100 certified
supplier, we take pride in delivering only
the best. If you have unique quality
requirements, we will cooperate with your
team to make certain that your standards
become ours.
Precision products require precision tools.
We have two Coordinate Measurement
Machines (CMM’s), four Laser Trackers, a
hand-held optical laser scanner, hardness
and conductivity meters.
• Ultrasonic Inspection
• Through Transmission
• Pulse Echo
• C-Scan
• Eddy Current
• Magnetic Particle
• Dye Penetrant
• Conductivity Testing
NDI/NDT CAPABILITIES and equipment
D-J Engineering, Inc. 219 W. 6th Ave
Augusta, KS 67010
Telephone: (316) 775-2774
Fax: (316) 775-4840
Visit us www.djgrp.com
We’ve gone GLOBAL!! Check us out
CONTACT
Linh Simmons
Director of Business Development
Cell: 316.350.4789
Office: 316.775.1212