DL1-03.08.001_main_en.A.1 (NMONO).pdf

8/9/2019 DL1-03.08.001_main_en.A.1 (NMONO).pdf

1/83

les

KONE TranSys™, KONE N MiniSpace™, KONE N MonoSpace®,KONE MiniSpace™, KONE S MonoSpace®, KONE S MonoSpace®(FURE) and KONE S MiniSpace™Technical Information for Sales

DL1-03.08.001

(A) 2012-09-15

VISUAL ITEMS

KONE TranSys™, KONE N MiniSpace™, KONE N MonoSpace®, KONE MiniSpace™, KONE S MonoSpace®,KONE S MonoSpace® (FURE) and KONE S MiniSpace™Technical Information for SalesDL1-03.08.001(A)2012-09-15


2/83

les

KONE TranSys™, KONE N MiniSpace™, KONE N MonoSpace®, KONEMiniSpace™, KONE S MonoSpace®, KONE S MonoSpace® (FURE) andKONE S MiniSpace™Technical Information for Sales

1 (82) DL1-03.08.001

(A) 2012-09-15

© 2012 KONE Corporation

All rights reserved.




3/83

les


2 (82) DL1-03.08.001

(A) 2012-09-15



CONTENTS

1 ABOUT THIS DOCUMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1 Purpose of this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.2 Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.3 Value levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.4 Related documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 ELEVATOR CAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 CEILINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.1 Ceiling alternatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4 WALL AND FRONT WALL MATERIALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1 Stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174.2 Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.3 Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4.4 Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5 FLOOR MATERIALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5.1 PVC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5.2 Stone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.3 Rubber. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5.4 Tear plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

6 OPTIONAL ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

6.1 Handrails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

6.2 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

6.3 Skirtings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

6.4 Buffer rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

6.5 Tenant directory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

6.6 Trap door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

6.7 KONE InfoScreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

7 CAR FOR LOCAL INTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

7.1 Weights of KONE accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

7.2 Interior weight allowance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

8 DOORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

8.1 Landing door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

8.2 Car door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

8.3 Door materials and colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

9 MAINTENANCE ACCESS PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

9.1 D-MAP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

9.2 W-MAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51


4/83

les


3 (82) DL1-03.08.001

(A) 2012-09-15



10 SIGNALIZATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

11 PAINTING / FINISHING OF VISIBLE ITEMS IN OPEN OR GLASS SHAFTS. . . . . . . . . . . 54

11.1 Painting / finishing classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

11.2 EN 81- 70 compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

11.3 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

12 KONE DESIGN COLLECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

12.1 Introduction to design themes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

12.2 Modification of car interiors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

12.3 Basic level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

12.4 Standard level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

12.5 Premium level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

13 SPECIAL CONSIDERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

13.1 EN 81-70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

14 APPROVALS AND VERSION HISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

15 FEEDBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82


5/83

les


4 (82) DL1-03.08.001

(A) 2012-09-15



1 ABOUT THIS DOCUMENT

1.1 Purpose of this document

This document contains the visual items of the following products:

– KONE TranSys™

– KONE N MiniSpace™

– KONE N MonoSpace®

– KONE MiniSpace™

– KONE S MonoSpace®

– KONE S MonoSpace® (FURE)

– KONE S MiniSpace™

This document describes all designed car interiors from KONE Design Collection, as well as the whole

Mix & Match offering of ceilings, surface materials, doors and optional interior accessories available in

SOC market area.

Any restrictions in the visual offering are mentioned in this document. Decoration allowance

information and possible product platform restrictions are in the elevator level information DLs (or core

elevator platform DLs).

For KONE E MiniSpace™ visual items, see DL1-03.43.001 KONE E MiniSpace™ Decoration.

1.2 Audience

This document is meant for KONE sales personnel.

1.3 Value levels

The ceilings, surface materials, doors and accessories as well as designed car interiors have been

divided into three value levels:

– Basic

– Standard

– Premium

In addition there is a separate column to indicate options that are available for KONE TranSys™ goods

transportation elevators.

1.4 Related documents

For more information, see the following documents:


6/83

les


5 (82) DL1-03.08.001

(A) 2012-09-15



– Product DLs (Elevator level information)

• DL1-01.18.000 Table of contents of KONE MiniSpace™• DL1-01.30.000 Table of contents of KONE S MiniSpace™

• DL1-00.36.003 Table of contents of KONE N MiniSpace™

• DL1-01.38.000 Table of contents of KONE MonoSpace® (FURE)

• DL1-01.39.000 Table of contents of KONE S MonoSpace® (FURE)

• DL1-00.08.001 Table of contents of KONE N MonoSpace® (SOC)

– Signalization DLs

• DL1-03.99.502 ELK KDS50 Signalization

• DL1-03.99.512 KSS 280 Series Signalization



• DL1-03.99.507 ELK KDS D Series (KONE Design signalization)

• DL1-03.99.507 KEA KDS D Series (KONE Design Signalization) for Australia – DCS DLs

• DL1-03.99.015 KONE Polaris™ 500 Destination Control System (DCS)

• DL1-03.99.016 KONE Polaris™ 800 Destination Control System (DCS) (NEB R2011.2for EAP,

CNE & WSE)

• DL1-03.99.611 KONE Polaris™ Destination control system (DCS) custom signalization devices

description

– InfoScreen DL

• DL1-03.99.422 InfoScreen

– Door DLs/SOs

• SO-01.02.061 KONE N MiniSpace™ engineering instructions

• SO-03.12.050 Centre opening 2 panel automatic car door AMDC1C standard packages

• SO-03.12.051 Side opening 2 panel automatic car door AMDC2L/R standard packages

• SO-03.12.060 Centre opening 2 panel automatic landing door AMDL1C standard packages• SO-03.12.061 Side Opening 2 Panel automatic Landing Door AMDL2L/R standard packages

• SO-03.92.026 Door offering description for KONE Entrance System (KES)


7/83

les


6 (82) DL1-03.08.001

(A) 2012-09-15



2 ELEVATOR CAR

The elevator car is designed for multi-purpose uses.

Table 1: Specifications of elevator cars

Table 2: Main parts of an elevator car

The space efficient and visually flexible elevator car is available with various decoration optionspresented in this document.

Car

Load, Q (kg) 320 – 4000

Car width, BB (mm) 900 – 2350

Car depth, DD (mm) 750 – 3400

Door width, LL (mm) 600 – 2300

Car height, CH (mm) 2000 – 2700

Speed Up to 4.0 m/s

COP position On the front wall and side wall

Flexible dimensions DD and BB with 10 mm increments

Standard compliance EN 81-1:1998GB 7588-2003

AS 1735.12

AS 1735.1

MS 2021:2006

SS 550

GOST R 53780

Product platforms (A-process) KONE TranSys™KONE N MonoSpace®

KONE S MonoSpace®

KONE N MiniSpace™ KONE S MiniSpace™KONE MiniSpace™

A = Ceiling

B = Walls

C = COP

D = Front wall

E = Door

F = Floor A

B

C

D

E

F

d0308001d


8/83

les


7 (82) DL1-03.08.001

(A) 2012-09-15



Table 3: Wall panel types

NOTE: When the side wall width is the maximum 1100 mm, there is one vertical panel.

When the side wall width is over 1100 mm, there are two vertical panels.

When the side wall width is over 2200 mm, there are three vertical panels.

Vertical wall panels Glass wall panel

Two panels on real wall Three panels on real wall

2-panel structure on the rear wall is

available when following materials

are selected:

– Etched stainless steel

– Printed stainless steel

– Textured stainless steel

And is mandatory when followingmaterials is selected:

– Laminate

3-panel structure on the rear wall is

available when following materials

are selected:

– Textured stainless steel

– Etched stainless steel

– Printed stainless steel

And is mandatory when followingmaterials are selected:

– Brushed stainless steel

– Satin stainless steel

– Indirect stainless steel

– Painted steel

– Mirror polished stainless steel

Glass material options are availa-

ble only for rear wall.

NOTE: The handrail HR81 is

mandatory when the glass wall

is selected.

NOTE: When COP position is

on side wall and code requires

hand rail on the COP wall,

HR81TR is mandatory in KEA

and available for other areas.NOTE: When the rear wall width is the maximum 1100 mm, there is one

vertical panel.

When the rear wall width is over 1100 mm, there are two or three

vertical panels.

When the rear wall width is over 2200 mm, there are always threevertical panels.

d0308001a d0308001b d0308001c


9/83

les


8 (82) DL1-03.08.001

(A) 2012-09-15



3 CEILINGS

Selecting an optimal ceiling for an elevator is essential because of many reasons:

– Good lighting can significantly improve the experience how we feel and behave in our environment.

– Light affects how colors, materials and surfaces are revealed and perceived.

– Lighting design is about creating the atmosphere.

– Good lighting significantly improves visual comfort and the quality of the experience.

– Light stimulates all senses and affects feelings of wellbeing, safety and orientation.

– Emotions can be enhanced with functional, appropriate and pleasant lighting.

The ceilings are categorized in two types according to their structure:

– Flat suspended ceilings

– 3D-ceilings

There are two types of lighting:

– Direct

– Indirect

Sources of light can also be divided into two types:

– Fluorescent

– LED

Key properties of KONE ceilings are the following:

– All ceilings and lighting comply with EN 81-1/2.

– Luminous intensity of the lighting is at least 100 lux at any floor level.

– Trap door is available for all ceilings as an option.

– The number of diffusers or spot lights in a ceiling depends on the car width and depth.

3.1 Ceiling alternatives

For material descriptions, see section 4, Wall and front wall materials.


10/83

les


9 (82) DL1-03.08.001

(A) 2012-09-15



Table 4: Car ceiling alternatives

Name Picture Properties

Value level

B a s i c

S t a n d a r d

P r e m i u m

K O N E T r a n S y s

CL70 Structure:

– Suspended ceiling

X

Lighting type:

– Direct lighting

Lighting source: – Fluorescent tubes

Ambiance:

Even lighting with good light levels

Finishing alternatives:

– ST4, silver brushed stainless steel,

AISI304


AISI443

– MP1, silver mirror polished stainless

steel

Ventilation:

– Visible ventilation

Ceiling thickness: – 70 mm

CL71 Structure:


X

Lighting type:

– Direct lighting

Lighting source:

– Fluorescent tubes

Ambiance:


Finishing alternatives (frame):

– PP10, white painted RAL9010

– ST4, silver brushed stainless steel, AISI304


AISI443

Ventilation:


Ceiling thickness:

– 70 mm


11/83

les


10 (82) DL1-03.08.001

(A) 2012-09-15



CL88 Structure:


X

Lighting type:

– Direct lighting

Lighting source:

– Eco efficient and long lifetime round

LED spotlights 3W/spot

Ambiance:

Clear diffuser


– ST4, silver brushed st steel, AISI304



steel

– MP2, golden mirror polished stainless

steel

Ventilation:


Ceiling thickness: – 70 mm

CL91 Structure:


X X

Lighting type:

– Direct lighting

Lighting source:


Ambiance:



– PP10, white painted steel RAL9010


– ST43, silver brushed st steel, AISI443Ventilation:


Ceiling thickness:

– 70 mm


Value level

B a s i c

S t a n d a r d

P r e m i u m



12/83

les


11 (82) DL1-03.08.001

(A) 2012-09-15



CL94 Structure:


X

Lighting type:

– Direct lighting

Lighting source:


Ambiance:



– PP10, white painted steel RAL9010



Ventilation:


Ceiling thickness:

– 70 mm

CL95 Structure:


X

Lighting type: – Indirect lighting

Lighting source:


Ambiance:

Perfect lighting solution for accessibility

cases: pleasant indirect lighting without

glare and good light levels

Finishing (frame):


Finishing alternatives (pontoon):



– MP1, silver mirror polished stainlesssteel

Ventilation:

– Invisible ventilation

Ceiling thickness:

– 70 mm


Value level

B a s i c

S t a n d a r d

P r e m i u m



13/83

les


12 (82) DL1-03.08.001

(A) 2012-09-15



CL97 Structure:


X

Lighting type:

– Direct lighting

Lighting source:

– Special KONE designed square LED

spotlights, eco efficient and long

lifetime 4 W/spot

Ambiance:

Frosted diffuser in the spot lights to prevent

glare





steel


steel

Ventilation:


Ceiling thickness:

– 70 mm

CL103 Structure:


X

Lighting type:

– Direct lighting

Lighting source:


Ambiance:



– PP10, white painted steel RAL9010 – ST4, silver brushed st steel, AISI304


Ventilation:


Ceiling thickness:

– 70 mm


Value level

B a s i c

S t a n d a r d

P r e m i u m



14/83

les


13 (82) DL1-03.08.001

(A) 2012-09-15



CL151 Structure:


X

Lighting type:

– Direct lighting

Lighting source:

– LED lighting panel

Ambiance:

Large uniform light surface

Plain or several printed graphic surfaces

available

Finishing alternatives (frame):

– ST4, silver brushed stainless steel

AISI304

– ST43, silver brushed stainless steel

AISI443


steel

Graphic alternatives (lighting diffuser):

– None

– Geometric (1)

– Bamboo (2)

Ventilation:


Ceiling thickness:

– 70 mm


Value level

B a s i c

S t a n d a r d

P r e m i u m


1 2


15/83

les


14 (82) DL1-03.08.001

(A) 2012-09-15



CL162 Structure:

– Suspended 3D ceiling

X

Lighting type:

– Combination lighting

Lighting source:

– Combination of LED spot lighting (direct

lighting) and fluorescent tubes (indirect

lighting)

Ambiance:

Suspended central panel creating different

levels

Finishing (top panel):


Finishing alternatives (suspended central

panel):


steel


steel

Ventilation:


Ceiling thickness:

– 150 mm

CL181 Structure:


X

Lighting type:

– Direct lighting

Lighting source:

– LED stripe, wall washer lighting

Ambiance:

Special lighting designed to highlight espe-

cially structured wall materials and patternsPowerful contrasts create a very unique

atmosphere



steel


steel

Ventilation:


Ceiling thickness:

– 70 mm


Value level

B a s i c

S t a n d a r d

P r e m i u m



16/83

les


15 (82) DL1-03.08.001

(A) 2012-09-15



CL191 Structure:


X

Lighting type:

– Direct lighting

Lighting source:

– Combination of LED spot lighting and

fluorescent tubes (decoration panel)

Ambiance:

Even lighting with exclusive detailing in the

central panel



AISI304


AISI443

Ventilation:


Ceiling thickness:

– 100 mmCL192 Structure:


X

Lighting type:

– Indirect lighting

Lighting source:


Ambiance:

Pleasant indirect lighting complemented

with decorative patterned frame

Finishing (central panel):


Finishing (frame):

– ST4, silver brushed st steel, AISI304 – ST43, silver brushed st steel, AISI443

Ventilation:


Ceiling thickness:

– 70 mm


Value level

B a s i c

S t a n d a r d

P r e m i u m



17/83

les


16 (82) DL1-03.08.001

(A) 2012-09-15



CL193 Structure:


X

Lighting type:

– Direct lighting

Lighting source:


Ambiance:

Elegant sculptural design with light reflect-

ing central panel to crate bright atmosphere

Finishing alternatives (faceplate + frame)):

– W, White painted (frame) + Textured

film (central panel)

– METP, Silver brushed stainless steel

(frame) + White painted (central panel)

Ventilation:


Ceiling thickness:

– 100 mm

LF1 Structure: – Roof integrated ceiling

X

Lighting type:

– Direct lighting

Lighting source:


Ambiance:




Ventilation:


Ceiling thickness:

– Integrated ceiling


Value level

B a s i c

S t a n d a r d

P r e m i u m



18/83

les


17 (82) DL1-03.08.001

(A) 2012-09-15



4 WALL AND FRONT WALL MATERIALS

NOTE: Same material must be used on one specific wall (A/B/C/D) regardless of the number of

panels except for 3-panel wall with etched stainless steel. For more information, see chapter 4.1.4

Etched stainless steel.

4.1 Stainless steel

Stainless steel has good corrosion resistance, strength, hygiene and durability features. The surface

requires minimal maintenance and continues to look good over many years of service. Therefore, the

stainless steel is an ideal choice for hospitals and public buildings. It is also highly recyclable and

typically contains at least 60% of recyclable material.

Features:

– Easy to maintain

– Environmentally friendly

– Corrosion-resistant

– Hygienic

– Recyclable

– Continues to look good over many years of service

– Durable

4.1.1 Brushed stainless steel

The brushed steel finish is produced by applying friction to the surface of the metal. The brushing gives

the metal a distinctive look, as it retains some but not all of its metallic lustre and is given a pattern of

very fine lines.

Features:

– Neutral appearance

– Correct cleaning is essential for the appearance and maintenance


19/83

les


18 (82) DL1-03.08.001

(A) 2012-09-15



Table 5: Brushed stainless steel alternatives

NOTE: ST43 is not available for KONE MiniSpace™.

4.1.2 Mirror polished stainless steel

Mirror polished stainless steel is an ideal choice for public buildings. It creates luxurious and spacious

atmosphere with reflections in golden, silver or black shades.

Features:

– Luxurious

– Neutral appearance

– Correct cleaning is essential for the appearance and maintenance

Table 6: Mirror polished stainless steel alternatives

PictureSAP

codeName

Recommended

segments

Availability Value level

S i d e w a l l s

R e a r w a l l s

2 p a n e l s

R e a r w a l l s

3 p a n e l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m


ST4 Silver, AISI304 Office, Retail, Hotel, Resi-

dential, Medical, Public

transportation

X X X X X

ST2 Golden

X X X X

ST43 Silver, AISI443

X X X X

X

F1 Asturias satin, AISI304

X X X X

PictureSAP

codeName

Recommended

segments

AvailabilityValue

level

S i d e w a l l s

R e a r w a l l s

2 p a n e l s

R e a r w a l l s

3 p a n e l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m

MP1 Silver Office, Retail, Hotel

X X X X

MP2 Golden Office, Retail, Hotel, Residential

X X X X

MP4 Copper Retail, Hotel

X X X


20/83


21/83

les


20 (82) DL1-03.08.001

(A) 2012-09-15



– Correct cleaning is essential for the appearance and maintenance: rinse with clean water or a mild

liquid detergent and wipe with a dry and non-abrasive cotton cloth

Table 8: Etched stainless steel alternatives

PictureSAP

codeName

Recommended

segments

AvailabilityValue

level

S i d e w a l l s

R e a r w a l l s

2 p a n e l s

R e a r w a l l s

3 p a n e l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m

ST26S Silver swing Office, Retail, Hotel

X X X X

ST26G Golden swing Office, Retail, Hotel

X X X X

ST28S Silver pop Office, Retail, Hotel

X X X X

ST28G Golden pop Office, Retail, Hotel

X X X X

ST31S Silver high-rise Office, Retail, Hotel

X X X X

ST31G Golden high-rise Office, Retail, Hotel

X X X X

ST32S Silver pleat Office, Retail, Hotel

X X X X

ST32G Golden pleat Office, Retail, Hotel

X X X X

ST33S Silver curve Office, Retail, Hotel

X X X X

ST33G Golden curve Office, Retail, Hotel

X X X X

ST34S Silver diamond Office, Retail, Hotel

X X X X

ST34G Golden diamond Office, Retail, Hotel

X X X X

ST35S Silver harmony Office, Retail, Hotel

X X X X

ST35G Golden harmony Office, Retail, Hotel

X X X X


22/83

les


21 (82) DL1-03.08.001

(A) 2012-09-15



NOTE: In the two-vertical-panel option, the panels are made of etched stainless steel.

In the three-vertical-panel rear wall option, the middle panel is made of etched stainless steel and

the side panels are mirror polished stainless steel with a matching silver or golden color.

4.1.5 Printed stainless steel

Printed stainless steel is designed on graphic art software providing high definition architectonic prints.

This selection offers timeless prints on stainless steel surface. It transforms neutral steel to the eye

catching element of elevator.

Features:

– Striking appearance with new dynamic graphic designs

– Good finger print resistance due to pre-treatment of the steel surface

– Smaller carbon footprint than conventional silk print

– Scratch test results are available


liquid detergent and wipe with a dry and non-abrasive cotton cloth. Never use cleaning detergents

containing alcohol, acid, alkali, or sodium hypochlorite — these will permanently damage the print

surface.

ST36S Silver graphics Office, Retail, Hotel

X X X X

ST36G Golden graphics Office, Retail, Hotel

X X X X

ST37S Sliver chain Office, Retail, Hotel

X X X X

ST37G Golden chain Office, Retail, Hotel

X X X X

ST38S Silver Ornament Office, Retail, Hotel

X X X X

ST38G Golden Ornament Office, Retail, Hotel

X X X X

PictureSAP

codeName

Recommended

segments

Availability

Value

level

S i d e w a l l s

R e a r w a l l s

2 p a n e l s

R e a r w a l l s

3 p a n e l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m


23/83

les


22 (82) DL1-03.08.001

(A) 2012-09-15



Table 9: Printed stainless steel alternatives

NOTE: Only one type printed steel raw material available for one rear wall whatever two-vertical-

panel or three-vertical-panel.

4.1.6 Satin stainless steel

Satin finishing on stainless steel creates a pleasant reflection and exquisite feeling.

Features:

– Luxurious and exquisite feeling


liquid detergent and wipe with a dry and non-abrasive cotton cloth.

Table 10: Satin stainless steel alternatives

PictureSAP

codeName

Recommended

segments

AvailabilityValue

level

S i d e w a l l s

R e a r w a l l s

2 p a n e l s

R e a r w a l l s

3 p a n e l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m

PS5 Radiant bamboo Office, Retail, Hotel

X X X X

PS6 Hong-kong lights

X X X X

PS7 Delicate cool

X X X X

PS8 Dot cloud

X X X X

PictureSAP

codeName

Recommended

segments

Availability Valuelevel

S i d e w a l l s

R e a r w a l l s

2 p a n e l s

R e a r w a l l s

3 p a n e l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m

MP6 Silver Office, Retail, Hotel

X X X


24/83

les


23 (82) DL1-03.08.001

(A) 2012-09-15



4.1.7 Indirect stainless steel

Indirect finishing creates a surface that is brushed to random directions. The achieved effect has

luxurious feeling.

Features:

– Luxurious


liquid detergent and wipe with a dry and non-abrasive cotton cloth.

Table 11: Indirect stainless steel alternatives

4.2 Steel

Steel is an alloy that consists mostly of iron. Today it is one of the most commonly used materials in the

world — in buildings, infrastructure, tools, ships and so on. It is a durable material that can be coated to

achieve desired surface features and visual appearance.

4.2.1 Painted steel

Painted steel creates a fresh look and is easy to clean.

Features:

– Neutral and bright colors

– Easy to clean

– Durable

PictureSAPcode

NameRecommended

segments

AvailabilityValue

level

S i d e w a l l s

R e a r w a l l s

2 p a n e l s

R e a r w a l l s

3 p a n e l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m

ST21S Silver Office, Retail, Hotel

X X X

ST21G Golden Office, Retail, Hotel

X X X


25/83

les


24 (82) DL1-03.08.001

(A) 2012-09-15



Table 12: Painted steel alternatives

4.2.2 Metallic painted steel

Metallic painting includes aluminum and pearl pigments to create sparkling metallic appearance.

Features:

– Metallic appearance

– Easy to clean

– Durable

Table 13: Metallic painted steel alternatives

PictureSAP

codeName

Recommended

segments


S i d e w a l l s

R e a r w a l l s

2 p a n e l s

R e a r w a l l s

3 p a n e l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m


PP18 Linen brown Residential

X X X X X

PP20 Wool gray Residential

X X X X X

PP21 Sunny orange Residential

X X X X

PP22 Fresh green Residential

X X X X

PictureSAP

codeName

Recommended

segments

AvailabilityValue

level

S i d e w a l l s

R e a r w a l l s

2 p a n e l s

R e a r w a l l s

3 p a n e l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m

METP1 Champagne Residential

X X X X

METP2 Cosmo red Residential

X X X X

METP3 Midnight blue Residential

X X X X

METP4 Pearl white Residential

X X X X


26/83


27/83

les


26 (82) DL1-03.08.001

(A) 2012-09-15



4.3.2 3D laminate

3D laminates have a beautiful sculpted surface finishing. The unique visual sensation is an ideal

choice for high-end office, retail and hotel buildings.

Features:

– Creates a delicate atmosphere

– Matches perfectly with the KONE wall washer ceiling CL181 that complements the structural

surface

– 3D laminates have FCS certificate

Table 15: 3D laminate alternatives

PictureSAP

codeName

Recommended

segments

AvailabilityValue

level

S i d e w a l l s

R e a r w a l l s

2 p a n e l s

R e a r w a l l s

3 p a n e l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m

L101 Black Retail, Hotel, Residential, Office

X X X

L102 Cream white Retail, Hotel, Residential, Office

X X X

L103 Cappucino Retail, Hotel, Residential, Office

X X X

L104 Strawberry red Retail, Hotel, Residential, Office

X X X


28/83

les


27 (82) DL1-03.08.001

(A) 2012-09-15



4.4 GlassThe laminated safety glass has a superior strength tolerance to high stress loads and an excellent

post-breakage performance. The surface is easy to clean and maintain, and bears time well.

Features:

– Durable

– Easy to clean

– Requires minimal maintenance

– Looks good over many years of service

NOTE: Glass wall is maximum dimension as BB = 2000 mm; G102 is only available for BB 1800mm and CH 2400 mm

4.4.1 Transparent glass

Transparent glass is laminated safety glass with a transparent PVB (polyvinyl butyral) film. It is used for

rear walls in scenic elevators.

Features:

– Open view through the glass wall

– Durable.

– Easy to clean

Table 16: Transparent glass alternatives

Picture Glass PropertiesRecommended

segments


S i d e w a l l s

R e a r w a l l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m

TW1 Finishing alternative (glass frame):

– ST4-Silver brushed stainless steel,

AISI304

– ST43-Silver brushed stainless steel, AISI443

– ST2-Golden brushed stainless steel

all segments

X X


29/83

les


28 (82) DL1-03.08.001

(A) 2012-09-15



4.4.2 Colored glass

Colored glass is created with color film and transparent glass lamination process. The method adds

depth in the color shades and the surface remains easy to clean and maintain.

Features:

– Deep, spectacular colors

– Durable

– Easy to clean



Table 17: Colored glass alternatives

4.4.3 Patterned glass

Patterned glasses are created with a lamination process or with combination of lamination and surface

processing. In lamination process a color film is placed between two transparent glasses which adds

depth in the color shades. Glass surfaces are durable and easy to clean.

Features:

– Deep, spectacular colors

– Striking patterns

– Durable

– Easy to clean


PictureSAP

codeName Properties

Recommended

segments

AvailabilityValue

level

S i d e w a l l s

R e a r w a l l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m

G102 Copper mirror Finishing alternative (glass

frame):

– ST4-Silver brushed

stainless steel,

AISI304


stainless steel,

AISI443 – ST2-Golden brushed

stainless steel

Office, Retail,

Hotel

X X

G103 Ocean blue Office, Retail,

Hotel

X X

G104 Bronze Office, Retail,

Hotel

X X

G105 Bright white Office, Retail,

Hotel

X X

G106 Ruby red Office, Retail,

Hotel

X X

G107 Black pearl Office, Retail,

Hotel

X X


30/83

les


29 (82) DL1-03.08.001

(A) 2012-09-15




Table 18: Patterned glass alternatives

PictureSAP

codeName Properties

Recommended

segments

AvailabilityValue

level

S i d e w a l l s

R e a r w a l l s

F r o n t w a l l s

B a s i c

S t a n d a r d

P r e m i u m

G5 Silver flow Finishing alternative (glass

frame):


stainless steel, AISI304


stainless steel,

AISI443a)

– ST2-Golden brushed

stainless steel

a) ST43 is not available for KONE MiniSpace™.

Office, Retail,

Hotel

X X

G6 White diamond Office, Retail,Hotel

X X

G8 Blue flow Office, Retail,

Hotel

X X

G10 Magic twist Office, Retail,

Hotel

X X

G11 Classic bam-

boo

Office, Retail,

Hotel

X X

G101 Mirror stripes Office, Retail,

Hotel

X X


31/83

les


30 (82) DL1-03.08.001

(A) 2012-09-15



5 FLOOR MATERIALS

5.1 PVC

PVC floors are produced from a mixture of resins and fillers. The surface is finished with a high wear

resistant PUR layer. All KONE options are commercial-grade, developed for intensive use.

Features:

– Flexible

– Wear-resistant


– Durable – Wide selection of colors and patterns

5.1.1 Single color

Table 19: Single color PVC floor alternatives

PictureSAP

codeName

Recommended

segments

Value level

B a s i c

S t a n d a r d

P r e m i u m

D24 Moon white Office, Retail, Hotel, Residential,

Public transportation, Medical

X

D25 Rocky gray X

D26 Lava stone X

D27 Saturn brown X

D28 Jupiter yellow X

D29 Mars red X

D30 Galaxy X

D31 Bamboo X


32/83

les


31 (82) DL1-03.08.001

(A) 2012-09-15



5.1.2 Patterned PVC

Table 20: Patterned PVC floor alternatives

5.2 Stone

Stone is a durable floor material with an exclusive look. The honeycomb option is available for cases

where lightweight stone floor is required.

Features: – Durable

– Easy to clean and maintain

– Exclusive look and feel

5.2.1 Real stone

Real stone is a kind of natural stone with a polished surface.

Features:

– Durable

– Easy to clean and maintain – Elegant and natural look and feel

PictureSAP

codeName

Recommended

segments

Value level

B a s i c

S t a n d a r d

P r e m i u m

DG01 Browny Office, Retail, Hotel, Residential,


X

DG02 Chessboard X

DG03 Puzzle soft X

DG04 Puzzle bright X

DG05 Legno X

DG06 Blusher X


33/83

les


32 (82) DL1-03.08.001

(A) 2012-09-15



Table 21: Real stone alternatives

5.2.2 Artificial stone

Artificial stone is a composite material made of natural crushed stone. The crushed stone is purified

and reformed with resins. With this process it is possible to work the appearance and elasticity of the

material without losing the elegant stone look and feel.Features:

– Durable

– Easy to clean and maintain

– Elegant look and feel

Table 22: Composite stone alternatives

PictureSAP

codeName

Recommended

segments

Value level

B a s i c

S t a n d a r d

P r e m i u m

M3R Black golden sand Office, Retail, Hotel, Residential,


X

M3H Black golden sand with

honeycomb

X

G1R Rose black X

G1H Rose black with honey-

comb

X

G2R Green black XG2H Green black with honey-

comb

X

G4R Gray black X

G4H Gray black with honey-

comb

X

PictureSAP

codeName

Recommended

segments

Value level

B a s i c

S t a n d a r d

P r e m i u m

M4R Nature white Office, Retail, Hotel, Residential XM4H Nature white with honey-

comb

X

M5R Pebble gray X

M5H Pebble gray with honey-

comb

X

M7R Light sand X

M7H Light sand with honey-

comb

X

M8R Shell white X

M8H Shell white with honey-

comb

X


34/83

les


33 (82) DL1-03.08.001

(A) 2012-09-15



5.3 Rubber

Natural and synthetic non-recycled rubber is calenderered and vulcanized to guarantee a homogenous

surface.

Features:

– Sound-absorbing

– Durable

– Smooth


– Wear-resistant

– High resistance for cigarette burns

– Cost-effective

– Suitable for heavy use

Table 23: Rubber alternatives

5.4 Tear plate

Zinc coated steel material for heavy use. Texture creates safe non-slippery surface for any challengingenvironment.

Features:

– Safe

– Hygienic

– Corrosion-resistant

– Easy to clean


– Durable

Table 24: Tear plate alternatives

PictureSAP

codeName

Recommended

segments

Value level

KONE TranSys

RC7 Rubber, coin pattern Public transportation, TranSys X

PictureSAP

code

NameRecommended

segments

Value level

KONE TranSysFE-1 Zinc coated steel, tear

plate

TranSys X


35/83

les


34 (82) DL1-03.08.001

(A) 2012-09-15



6 OPTIONAL ACCESSORIES

6.1 Handrails

Handrails can be placed on the walls of the elevator car to provide support for the passengers.

There are multiple handrail options available.

Selection rules:

– All handrails can be placed on rear wall and side walls. A handrail consists of separate end caps

and a tube, and therefore easy to vary according to car size.

– Only one handrail type can be chosen for one elevator car.

– For the full glass wall case, a dedicated handrail is offered which is fixed to the side walls and to

the floor. The glass wall handrail HR81 has different fixing method comparing to the otherhandrails.

NOTE: It is also possible to have handrail on the same wall with side wall FH COP. In this case the

handrail has been dimensioned so that it will not overlap COP.

For more information, see SO-06.03.001.

Table 25: Handrail alternatives


Value level

B a s i c

S t a n d a r d

P r e m i u m


HR31 Round tube with black plastic end

Diameter 38 mm

Finishing:

– Aluminum (LBE)

X

HR34 Round tube with black plastic end

Diameter 38 mm

Finishing:

– Aluminum (LBE)

X

NOTE: It is EN 81-70 compliant.


36/83

les


35 (82) DL1-03.08.001

(A) 2012-09-15



HR24R Flat stainless steel plate with round end

Height 80 mm

Finishing:

– F, silver brushed stainless steel X

HR61 Round tube with straight ends

Diameter 38 mm


– F, silver brushed stainless steel

AISI304

– MP2, golden mirror polished

stainless steel

X

HR62 Square tube

35 mm × 35 mm



AISI304

X


stainless steel

HR64 Round tube with rounded ends

Diameter 38 mm




AISI304

X


stainless steel


Value level

B a s i c

S t a n d a r d

P r e m i u m



37/83

les


36 (82) DL1-03.08.001

(A) 2012-09-15



HR65 Triangle tube with rounded ends




AISI304

X


stainless steel

HR71 Wooden tube

Diameter 38 mm

Holder finishing alternatives (holder):


AISI304


stainless steel

X

Bar finishing alternatives (bar):

– WLF, Light wood

– WDF, Dark wood


Value level

B a s i c

S t a n d a r d

P r e m i u m



38/83

les


37 (82) DL1-03.08.001

(A) 2012-09-15



HR81 Glass wall handrail tube

Diameter 38 mm



AISI304

X

– SS1, golden brushed stainless steel

AISI304

NOTE: When COP position is on side wall and code requires hand rail on the COP wall,

HR81TR is mandatory in KEA and available for other areas.


Value level

B a s i c

S t a n d a r d

P r e m i u m


3003338.wmf


39/83

les


38 (82) DL1-03.08.001

(A) 2012-09-15



6.2 Mirrors

Mirrors can be placed on the rear wall of the elevator car to create an impression of space and luxury.

The dimensions of the mirrors have been defined according to accessible design principles. The mirror

dimensions and position allow wheelchair users to see the floor and entrance when entering and

exiting the elevator.

Rules:

– Handrail is mandatory with a mirror to enhance safety.

– The installation height is 50 mm from the ceiling.

The mirror is installed to the car wall with the fixing parts that are not visible to the passenger. Separate

aluminum lists are not needed. The mirror cannot be installed to the glass wall.

The sizes of mirrors are defined according to car sizes. For detailed dimensions of the mirror, see SO-

06.02.015 .

Table 26: Mirror size and material alternatives

Picture Size SAP code Description Material

Value level

B a s i c

S t a n d a r d

P r e m i u m

PW/PH MR1 Partial width / Partial height

(fixed sizes only)

Glass X

PW/MH MR1 Partial width / Mid height

(fixed sizes only)

Glass X

FW/PH MR1 Full width / Partial height Glass X

FW/FH MR1 Full width / Full height Glass X


40/83

les


39 (82) DL1-03.08.001

(A) 2012-09-15



6.3 Skirtings

Skirting is included in all car decorations. The skirting is installed at the edges of the car floor, on the

side and rear walls. It is installed with the fixing parts that are not visible to the passenger. Skirting

hides gaps between the floor and wall materials: it is the final detail ensuring the flawless visual impact

of the car.

The skirting is made of skirting profiles, corner pieces and possibly end caps (in case of surface

mounted COP on side wall). The height of the skirting is 75 mm.

When full height car operating panel (COP) on side wall:

– With KDS D40 the skirting is interrupted at the front of the COP

– With other full height KDS signalizations the skirting continues over the COP

Table 27: Skirting material alternatives

Figure 1. Location of skirting Figure 2. Skirting detail

Picture SAP code Name

Value level

B a s i c

S t a n d a r d

P r e m i u m

SK1 ST4, silver brushed stainless steel, AISI304

ST43, silver brushed stainless steel, AISI443

X

ST2, golden brushed stainless steel X


41/83

les


40 (82) DL1-03.08.001

(A) 2012-09-15



6.4 Buffer rails

A buffer rail prevents the wall panels from damages. Due to its rigid construction it sustains impacts

from shopping trolleys etc.

The aluminum frame of the buffer rail is 100 mm high and 18 mm deep, and its total length is 650 –

3400 mm. The buffer rail does not extend to the car corner. It is installed with the fixing parts that are

not visible to the passenger.

NOTE: A buffer rail can be placed into the same wall as COP, see figure 3.

NOTE: Buffer rail can not be placed on glass walls or wall with mirror.

Table 28: Buffer rail material alternatives

Figure 3. Location of buffer rails Figure 4. Buffer rail

PictureSAP

codeFrame Surface

Recom-

mended

segments

Value level

B a s i c

S

t a n d a r d

P

r e m i u m


BR1 Frame materials: Alumi-

num with brushed stain-

less steel looking

finishing.

Surface materials:

Silver brushed stain-

less steel

AISI304

Light wood

Retail, hospital X X


42/83

les


41 (82) DL1-03.08.001

(A) 2012-09-15



6.5 Tenant directory

The tenant directory is a designed module that contains the house tenant information or other printed

material. The tenant directory can be fixed on any common flat surface on the elevator car wall (except

glass wall). Tenant directories will be fixed to car wall by using standard self drilling screws.

Tenant directories are available in two sizes: A4 and A3. They can be installed either vertically or

horizontally. An ordinary paper is used as an information sheet.

NOTE: Place the tenant directory so that there is free space above or below the directory. To

change the information sheet, approximately 210 or 420 mm (same as the directory height) of free

space is needed.

Table 29: Tenant directory size and material alternatives

Figure 5. Location of tenant directory Figure 6. Tenant directory

Size SAP code FrameRecommended

segments

Value level

B a

s i c

S t a n

d a r d

P r e m

i u m

A4 TD1 Mirror finish aluminum (H) X

A3 TD2 Mirror finish aluminum (H) X


43/83

les


42 (82) DL1-03.08.001

(A) 2012-09-15



6.6 Trap door

A trap door is an optional emergency exit on the car roof. It allows the passengers to exit the car

through the car ceiling in case the doors are jammed or the elevator is stuck between the floors, or the

fireman to enter the car.

Trap door is available with 350 × 500 and it can be installed with all ceiling types. when Q 1000kg and

DD 1400, trap door size with 400 × 500 and 500 × 700 can be as an option.

NOTE: Trap door 500 x 700 mm is mandatory in case of EN 81-72.

Figure 7. Location of trap door Figure 8. Trap door with a ceiling


44/83

les


43 (82) DL1-03.08.001

(A) 2012-09-15



6.7 KONE InfoScreen

KONE InfoScreen is an intelligent configurated information screen and can be installed either inside

the elevator car or in the elevator lobby. It provides information about the elevator status, general

building messages, time and date. Also, it enables the customer to have any of their chosen content

shown in the screen, next to KONE branded info area.

For more information about KONE InfoScreen, see DL1-03.99.422 .

Figure 9. Location of KONE InfoScreen Figure 10.KONE InfoScreen Premium and

Standard display


45/83

les


44 (82) DL1-03.08.001

(A) 2012-09-15



7 CAR FOR LOCAL INTERIOR

7.1 Weights of KONE accessories

Table 30: Ceilings

Table 31: Wall decoration materials

Ceiling type Weight (kg/m2)

LF1 48.0

CL70 25.5

CL71 21.0

CL88 15.0

CL91 16.0

CL94 16.0

CL95, CL103, CL192 18.5

CL97 13.0

CL98 12.5

CL104 24.0

CL151 25.0

CL162 25.0

CL181 20.0

CL191 20.0

CL193 20.0

Wall decoration material Weight (kg/m2)

LaminateWood pattern laminate 3.3

3D Laminate 3.3

Glass 22.0

NOTE: For steel materials, no extra weights need to be counted in.

NOTE: Laminate includes glue and aluminium profiles.


46/83

les


45 (82) DL1-03.08.001

(A) 2012-09-15



Table 32: Floor materials

Table 33: Trap door

Optional accessories

Table 34: Handrail

Table 35: Other optional accessories

Floor material Weight (kg/m2)

Rubber 5.3

Tear plate (zinced coated steel) 33.0

PVC and Patterned PVC 5.4

Stone

Real stone 42.0

Artificial stone 37.5

Real stone + honeycomb 18.0

Artificial stone + honeycomb 16.5

Weight (kg)Trap door 8.0

Handrail type Weight (kg/m)

HR31 1.0

HR34 1.5

HR24R 3.3

HR61 2.5

HR62 2.3

NR64 3.6

HR65 3.8

HR71 1.5

HR81 2.0

Optional accessories Weight

Mirrors (9 mm, including back plate) 13.8 kg/m2

Skirtings

(invisible ventilation holes, skirting height HS = 75mm)

0.9 kg/m

Buffer rails 2.3 kg/m

Seat (with fixings) 6.1 kg

Tenant directoryTD1 1.0 kg

TD2 1.8 kg


47/83

les


46 (82) DL1-03.08.001

(A) 2012-09-15



7.2 Interior weight allowance

For more information, see the following documents:

– DL1-01.08.001 KONE N MonoSpace (SOC) Introduction

– DL1-01.36.003 KONE N MiniSpace™ (SOC) Introduction

– DL1-02.17.001 KONE S MonoSpace Core elevator platforms

– DL1-02.39.001 KONE S MonoSpace (FURE) Core elevator platforms

– DL1-02.18.001 KONE MiniSpace™ Core elevator platforms

– DL1-02.21.001 KONE TranSys™ Core elevator platforms

– DL1-02.30.101 KONE S MiniSpace™ Core elevator platforms


48/83

les


47 (82) DL1-03.08.001

(A) 2012-09-15



8 DOORS

8.1 Landing door

Landing door has three types: base duty, mid duty and high duty, and there are two alternatives for

each type: normal and fire rated.

– Base duty door: a specific range of doors intended for up to 200 000 cycles/year.

– Mid duty door: a specific range of doors intended for 200 000...400 000 cycles/year.

– High duty door: a specific range of doors intended for over 400 000 cycles / year.

Base duty and Mid duty landing doors both have 2 panels. The landing door frame is narrow, 50 x 50

mm.

High duty landing door is developed for elevators handling medium intensive traffic conditions. There

are two landing door frame types available: narrow frame (about 50 x 50 mm) and frame (120 x 50

mm) which is only available for KEA.

Table 36: Landing door dimensions

There are 2 options for high duty landing door sill:

– A = extruded aluminum sill without surface (standard)

– S = folded stainless steel sill as (optional)

Figure 11.Landing door Figure 12.Car door

Door type Door clear opening

LL (mm)

Door height HH (mm)

Center opening (CO) Side opening (SO)

Base duty 700, 800, 900, 1000, 1200a)

a) Only for Russia market.

2000, 2100, 2200 2000, 2100

Mid duty 700, 800, 900, 1000, 1100, 1200, 1300b)

b) Not available for KOR and Russia.

2000, 2100, 2200, 2300, 2400

High duty 700, 800, 900, 1000, 1100, 1200, 1300c)

c) Not available for glass door.

2000, 2100, 2200, 2300, 2400


49/83

les


48 (82) DL1-03.08.001

(A) 2012-09-15



8.2 Car door

Table 37: Range of car door

There are 2 options for high duty landing door sill:



8.3 Door materials and colors

Table 38: Door materials and colors

Door clear opening

LL (mm)

Door height

LL (mm)

Opening Panel Door type

700

2000, 2100, 2200, 2300, 2400 CO / SO 2 AMD

800

900

1000

1100

1200

1300

a)

a) Not available for glass door.SO

Picture SAP code Description Car

door

Landing door Frame

finishingH M B

NOTE: H = High duty; M = Mid duty; B = Base duty

Z Electrozinc coated steel plate X Z

P P-Powder painted RAL color X X X X P

ST4 Brushed stainless steel silver, AISI304

X X X X

ST4

ST2 Brushed stainless steel golden

X X X X

ST2

ST43 Brushed stainless steel silver, AISI443

X X X X

ST43

F1 Asturias satin, AISI304

X X X X

F1

A Acid proof AISI316 X X A

TS2 Flemish linen, AISI304

X X X

ST4


50/83

les


49 (82) DL1-03.08.001

(A) 2012-09-15



There are 2 options for car door sill, matching the high duty landing door sill options:



ST26S Silver swing

X X X X

ST4

ST28S Silver pop

X X X X

ST31S Silver high-rise

X X X X

ST37S Steel chain

X X X X

TW1 Transparent (glass frame has 4 options:ST2/ST4/MP1/MP2) X X

ST4, ST43,MP1, MP2

MP1 Mirror polished stainless steel, silver

X X X X

MP1

MP2 Mirror polished stainless steel, golden

X X X X

MP2

PP18 Linen brown RAL1015

X X X X

PP18

PP20 Wool gray RAL0808005

X X X X

PP20

PP21 Sunny orange RAL0506060

X X X X

PP21

PP22 Fresh green RAL1008080

X X X X

PP22

METP1 Champagne

X X X X

METP1

METP2 Cosmo red RAL3003

X X X X

METP2

METP3 Midnight blue RAL5017

X X X X

METP3

METP4 Pearl white RAL9003

X X X X

METP4

Picture SAP code Description Car

door

Landing door Frame

finishingH M B


51/83

les


50 (82) DL1-03.08.001

(A) 2012-09-15



9 MAINTENANCE ACCESS PANEL

NOTE: This section is applicable only for machine-room-less elevators.

The maintenance access panel (MAP) is a part of the elevator control system, including the user-

interface intended for serviceman and switches, fuses and brake release lever. It contains, as

prescribed by elevatos codes, the main commands for emergency and maintenance operations. The

MAP must be reachable from the landing.

MAP is located on the topmost floor or on the second topmost floor. It is always placed on the same

side of the machine and always on “A” shaft side.

There are two MAP types: door-type MAP (D-MAP) is integrated into the door frame or door front and

the wall-type MAP (W-MAP) is installed to the wall next to the landing door.

The maximum interfloor between the topmost floor and the second topmost floor is four meters. The

minimum width of the lobby in front of the MAP panel depends on local regulations.

9.1 D-MAP

Table 39: Finishing alternatives for D-MAP

Figure 13. Landing door with integrated

maintenance access panel (D-

MAP)

Figure 14. Maintenance access panel on the

adjacent wall (W-MAP)

SAP code Name

ST4 Silver brushed stainless steel


52/83

les


51 (82) DL1-03.08.001

(A) 2012-09-15



Table 40: Frame type landing door with D-MAP

9.2 W-MAP

Table 41: Finishing alternatives and main dimensions for W-MAP

Table 42: Stainless steel wall MAP

SAP code Name MAP size

ST4 Silver brushed stainless steel

200 × 1300 mm

ST2 Golden brushed stainless steel

MP1 Silver mirrored stainless steel

MP2 Golden mirrored stainless steel

1 2 0

1 2 0


53/83

les


52 (82) DL1-03.08.001

(A) 2012-09-15



Surface mounted Recessed

1) Cable holes to elevator shaft 120 x 60 mm. Holesto be closed locally by an approved fire resistant

material.

2) Machine side

1) Cable holes to elevator shaft 120 x 60 mm. Holes tobe closed locally by an approved fire resistant

material.

2) Machine side with recessed mounting two metal

brackets are added (to top and to bottom) in order to

hide the border of the hole in the wall. For details

see the drawing 774447 in EDMS Web.

Recessed mounting applies to aluminum wall MAP

only.

1

1


54/83

les


53 (82) DL1-03.08.001

(A) 2012-09-15



10 SIGNALIZATION

For more information, see the following DLs:

– DL1-03.99.502 ELK KDS50 Signalization

– DL1-03.99.512 KSS 280 Series Signalization



– DL1-03.99.507 ELK KDS D Series (KONE Design signalization)

– DL1-03.99.507 KEA KDS D Series (KONE Design Signalization) for Australia

– DL1-03.99.016 KONE Polaris™ 800 Destination Control System (DCS) (NEB R2011.2for EAP,

CNE & WSE)

– DL1-03.99.611 KONE Polaris™ Destination control system (DCS) custom signalization devices

description

Table 43: Recommended signalizations

Products KDS D KDS 300 KDS 290 KSS 280 KDS 50 (FH)

KONE TranSys™ X X X

KONE N MonoSpace® X X X X X

KONE S MonoSpace® X X X X

KONE N MiniSpace™ X X X X X

KONE S MiniSpace™ X X X X

KONE MiniSpace™ (A-process) X X X

Date post:	01-Jun-2018
Category:	Documents
Upload:	jhon-apaza
View:	224 times
Download:	0 times

DL1-03.08.001_main_en.A.1 (NMONO).pdf

Documents