Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 1 / 518
Roller chain - Double strandASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Roller chain - Double strand
Roller chain - Double strand
Cadenas y componentes Roller chain - Double strand
Kettengetriebe und Bauteile Roller chain - Double strand
Roller chain - Double strand (inch series)ASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Roller chain - Double strand (inch series)
Roller chain - Double strand (inch series)
Cadenas y componentes Roller chain - Double strand (inch series)
Kettengetriebe und Bauteile Roller chain - Double strand (inch series)
Roller chain - Quadruple strandASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Roller chain - Quadruple strand
Roller chain - Quadruple strand
Cadenas y componentes Roller chain - Quadruple strand
Kettengetriebe und Bauteile Roller chain - Quadruple strand
Roller chain - Quadruple strand (inch series)ASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Roller chain - Quadruple strand (inch series)
Roller chain - Quadruple strand (inch series)
Cadenas y componentes Roller chain - Quadruple strand (inch series)
Kettengetriebe und Bauteile Roller chain - Quadruple strand (inch series)
Roller chain - Single strandASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Roller chain - Single strand
Roller chain - Single strand
Cadenas y componentes Roller chain - Single strand
Kettengetriebe und Bauteile Roller chain - Single strand
Roller chain - Single strand (inch series)ASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Roller chain - Single strand (inch series)
Roller chain - Single strand (inch series)
Cadenas y componentes Roller chain - Single strand (inch series)
Kettengetriebe und Bauteile Roller chain - Single strand (inch series)
Roller chain - Triple strandASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Roller chain - Triple strand
Roller chain - Triple strand
Cadenas y componentes Roller chain - Triple strand
Kettengetriebe und Bauteile Roller chain - Triple strand
Roller chain - Triple strand (inch series)ASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Roller chain - Triple strand (inch series)
Roller chain - Triple strand (inch series)
Cadenas y componentes Roller chain - Triple strand (inch series)
Kettengetriebe und Bauteile Roller chain - Triple strand (inch series)
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 2 / 518
Sprockets - Double strandASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Sprockets - Double strand
Sprockets - Double strand
Cadenas y componentes Sprockets - Double strand
Kettengetriebe und Bauteile Sprockets - Double strand
Sprockets - Double strand (inch series)ASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Sprockets - Double strand (inch series)
Sprockets - Double strand (inch series)
Cadenas y componentes Sprockets - Double strand (inch series)
Kettengetriebe und Bauteile Sprockets - Double strand (inch series)
Sprockets - Quadruple strandASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Sprockets - Quadruple strand
Sprockets - Quadruple strand
Cadenas y componentes Sprockets - Quadruple strand
Kettengetriebe und Bauteile Sprockets - Quadruple strand
Sprockets - Quadruple strand (inch series)ASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Sprockets - Quadruple strand (inch series)
Sprockets - Quadruple strand (inch series)
Cadenas y componentes Sprockets - Quadruple strand (inch series)
Kettengetriebe und Bauteile Sprockets - Quadruple strand (inch series)
Sprockets - Single strandASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Sprockets - Single strand
Sprockets - Single strand
Cadenas y componentes Sprockets - Single strand
Kettengetriebe und Bauteile Sprockets - Single strand
Sprockets - Single strand (inch series)ASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Sprockets - Single strand (inch series)
Sprockets - Single strand (inch series)
Cadenas y componentes Sprockets - Single strand (inch series)
Kettengetriebe und Bauteile Sprockets - Single strand (inch series)
Sprockets - Triple strandASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Sprockets - Triple strand
Sprockets - Triple strand
Cadenas y componentes Sprockets - Triple strand
Kettengetriebe und Bauteile Sprockets - Triple strand
Sprockets - Triple strand (inch series)ASME B29.100-2002 Chain drives and their components
Entranements par chane et leurs composants
Catene e componenti
Sprockets - Triple strand (inch series)
Sprockets - Triple strand (inch series)
Cadenas y componentes Sprockets - Triple strand (inch series)
Kettengetriebe und Bauteile Sprockets - Triple strand (inch series)
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 3 / 518
Spring cottersDIN 11024 Rings, bushes, sleeves, collars
Anneaux, douilles, manchons, colliers
Anelli, rasamenti, manicotti, collari
Spring cotters
Spring cotters
Anillos, casquillos, guardapolvos y collarines
Spring cotters
Ringe, Buchsen, Muffen, Schellen
Spring cotters
Spring cottersDIN 11024 Compression springs
Ressorts de compression
Molla a compressione
Spring cotters
Spring cotters
Resortes de compresin Spring cotters
Druckfedern Spring cotters
Round plain head nails for use in automatic nailling machinesDIN 1143 Pins, nails
Goupilles, clous
Perni, chiodi
Round plain head nails for use in automatic nailling machines
Round plain head nails for use in automatic nailling machines
Pasadores, fiadores Round plain head nails for use in automatic nailling machines
Stifte, Ngel Round plain head nails for use in automatic nailling machines
Decorator's tacksDIN 1157 Pins, nails
Goupilles, clous
Perni, chiodi
Decorator's tacks
Decorator's tacks
Pasadores, fiadores Decorator's tacks
Stifte, Ngel Decorator's tacks
Wall hooksDIN 1158 Pins, nails
Goupilles, clous
Perni, chiodi
Wall hooks
Wall hooks
Pasadores, fiadores Wall hooks
Stifte, Ngel Wall hooks
Moulding nailsDIN 1163 Pins, nails
Goupilles, clous
Perni, chiodi
Moulding nails
Moulding nails
Pasadores, fiadores Moulding nails
Stifte, Ngel Moulding nails
Steel round head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded
DIN 124 Rivets
Rivets
Rivetti
Steel round head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded
Steel round head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded
Remaches Steel round head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded
Nieten Steel round head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded
Steel round head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk
DIN 124 Rivets
Rivets
Rivetti
Steel round head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk
Steel round head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk
Remaches Steel round head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk
Nieten Steel round head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 4 / 518
Curved spring lock washersDIN 128 Washers
Rondelles
Rosette
Curved spring lock washers
Curved spring lock washers
Arandelas Curved spring lock washers
Unterlegscheiben Curved spring lock washers
Wave spring washersDIN 137 Washers
Rondelles
Rosette
Wave spring washers
Wave spring washers
Arandelas Wave spring washers
Unterlegscheiben Wave spring washers
Washers type coarse for boltsDIN 1441 Washers
Rondelles
Rosette
Washers type coarse for bolts
Washers type coarse for bolts
Arandelas Washers type coarse for bolts
Unterlegscheiben Washers type coarse for bolts
Clevis pins with head and stud endDIN 1445 Pins, nails
Goupilles, clous
Perni, chiodi
Clevis pins with head and stud end
Clevis pins with head and stud end
Pasadores, fiadores Clevis pins with head and stud end
Stifte, Ngel Clevis pins with head and stud end
Grooved pins, half length grooved with gorge - Type A with slot for retaining rings
DIN 1469 Pins, nails
Goupilles, clous
Perni, chiodi
Grooved pins, half length grooved with gorge - Type A with slot for retaining rings
Grooved pins, half length grooved with gorge - Type A with slot for retaining rings
Pasadores, fiadores Grooved pins, half length grooved with gorge - Type A with slot for retaining rings
Stifte, Ngel Grooved pins, half length grooved with gorge - Type A with slot for retaining rings
Grooved pins, half length grooved with gorge - Type B with slot for retaining washers
DIN 1469 Pins, nails
Goupilles, clous
Perni, chiodi
Grooved pins, half length grooved with gorge - Type B with slot for retaining washers
Grooved pins, half length grooved with gorge - Type B with slot for retaining washers
Pasadores, fiadores Grooved pins, half length grooved with gorge - Type B with slot for retaining washers
Stifte, Ngel Grooved pins, half length grooved with gorge - Type B with slot for retaining washers
Grooved pins, half length grooved with gorge - Type C with rounded slotDIN 1469 Pins, nails
Goupilles, clous
Perni, chiodi
Grooved pins, half length grooved with gorge - Type C with rounded slot
Grooved pins, half length grooved with gorge - Type C with rounded slot
Pasadores, fiadores Grooved pins, half length grooved with gorge - Type C with rounded slot
Stifte, Ngel Grooved pins, half length grooved with gorge - Type C with rounded slot
Turnbuckle nuts made from hexagon barDIN 1479 Nuts
Ecrous
Dadi
Turnbuckle nuts made from hexagon bar
Turnbuckle nuts made from hexagon bar
Tuercas Turnbuckle nuts made from hexagon bar
Muttern Turnbuckle nuts made from hexagon bar
Turnbuckles made from steel tube or round steel barDIN 1480 Nuts
Ecrous
Dadi
Turnbuckles made from steel tube or round steel bar
Turnbuckles made from steel tube or round steel bar
Tuercas Turnbuckles made from steel tube or round steel bar
Muttern Turnbuckles made from steel tube or round steel bar
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 5 / 518
Accessories for the installation of gypsum plasterboardDIN 18182 Pins, nails
Goupilles, clous
Perni, chiodi
Accessories for the installation of gypsum plasterboard
Accessories for the installation of gypsum plasterboard
Pasadores, fiadores Accessories for the installation of gypsum plasterboard
Stifte, Ngel Accessories for the installation of gypsum plasterboard
Triangular nuts for use with electrical equipment in miningDIN 22 425 Nuts
Ecrous
Dadi
Triangular nuts for use with electrical equipment in mining
Triangular nuts for use with electrical equipment in mining
Tuercas Triangular nuts for use with electrical equipment in mining
Muttern Triangular nuts for use with electrical equipment in mining
Double end studsDIN 2509 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Double end studs
Double end studs
Pasadores, tornillos, bridas Double end studs
Stiftbolzen, Schrauben, Bolzen
Double end studs
Hexagon nuts for use with bolts with waisted shank - Type NF regular patternDIN 2510-5 Nuts
Ecrous
Dadi
Hexagon nuts for use with bolts with waisted shank - Type NF regular pattern
Hexagon nuts for use with bolts with waisted shank - Type NF regular pattern
Tuercas Hexagon nuts for use with bolts with waisted shank - Type NF regular pattern
Muttern Hexagon nuts for use with bolts with waisted shank - Type NF regular pattern
Hexagon nuts for use with bolts with waisted shank - Type TF for internal centring
DIN 2510-5 Nuts
Ecrous
Dadi
Hexagon nuts for use with bolts with waisted shank - Type TF for internal centring
Hexagon nuts for use with bolts with waisted shank - Type TF for internal centring
Tuercas Hexagon nuts for use with bolts with waisted shank - Type TF for internal centring
Muttern Hexagon nuts for use with bolts with waisted shank - Type TF for internal centring
Cap nuts for use with bolts with waisted shank - Type AF regular patternDIN 2510-6 Nuts
Ecrous
Dadi
Cap nuts for use with bolts with waisted shank - Type AF regular pattern
Cap nuts for use with bolts with waisted shank - Type AF regular pattern
Tuercas Cap nuts for use with bolts with waisted shank - Type AF regular pattern
Muttern Cap nuts for use with bolts with waisted shank - Type AF regular pattern
Cap nuts for use with bolts with waisted shank - Type BF for internal centringDIN 2510-6 Nuts
Ecrous
Dadi
Cap nuts for use with bolts with waisted shank - Type BF for internal centring
Cap nuts for use with bolts with waisted shank - Type BF for internal centring
Tuercas Cap nuts for use with bolts with waisted shank - Type BF for internal centring
Muttern Cap nuts for use with bolts with waisted shank - Type BF for internal centring
Sleeves for use with bolts with waisted shank - Type D for centring by the nutDIN 2510-7 Spacers
Entretoises
Distanziatori
Sleeves for use with bolts with waisted shank - Type D for centring by the nut
Sleeves for use with bolts with waisted shank - Type D for centring by the nut
Separadores Sleeves for use with bolts with waisted shank - Type D for centring by the nut
Distanzstcke Sleeves for use with bolts with waisted shank - Type D for centring by the nut
Sleeves for use with bolts with waisted shank - Type E for centring by the outside diameter of the thread
DIN 2510-7 Spacers
Entretoises
Distanziatori
Sleeves for use with bolts with waisted shank - Type E for centring by the outside diameter of the thread
Sleeves for use with bolts with waisted shank - Type E for centring by the outside diameter of the thread
Separadores Sleeves for use with bolts with waisted shank - Type E for centring by the outside diameter of the thread
Distanzstcke Sleeves for use with bolts with waisted shank - Type E for centring by the outside diameter of the thread
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 6 / 518
Taper pins with thread ends and constant taper lengthsDIN 258 Pins, nails
Goupilles, clous
Perni, chiodi
Taper pins with thread ends and constant taper lengths
Taper pins with thread ends and constant taper lengths
Pasadores, fiadores Taper pins with thread ends and constant taper lengths
Stifte, Ngel Taper pins with thread ends and constant taper lengths
Tangential keys and tangential keyways for alternating shock loadsDIN 268 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Tangential keys and tangential keyways for alternating shock loads
Tangential keys and tangential keyways for alternating shock loads
Chavetas y chaveteros Tangential keys and tangential keyways for alternating shock loads
Keile und Kerbungen Tangential keys and tangential keyways for alternating shock loads
Tangential keys and tangential keyways for constant loadsDIN 271 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Tangential keys and tangential keyways for constant loads
Tangential keys and tangential keyways for constant loads
Chavetas y chaveteros Tangential keys and tangential keyways for constant loads
Keile und Kerbungen Tangential keys and tangential keyways for constant loads
Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded
DIN 302 Rivets
Rivets
Rivetti
Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded
Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded
Remaches Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded
Nieten Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded
Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk
DIN 302 Rivets
Rivets
Rivetti
Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk
Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk
Remaches Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk
Nieten Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk
Wing screwsDIN 316 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Wing screws
Wing screws
Pasadores, tornillos, bridas Wing screws
Stiftbolzen, Schrauben, Bolzen
Wing screws
Pipe nutsDIN 431 Nuts
Ecrous
Dadi
Pipe nuts
Pipe nuts
Tuercas Pipe nuts
Muttern Pipe nuts
External tab washersDIN 432 Washers
Rondelles
Rosette
External tab washers
External tab washers
Arandelas External tab washers
Unterlegscheiben External tab washers
Product grade A washers, Part 1DIN 433 Washers
Rondelles
Rosette
Product grade A washers, Part 1
Product grade A washers, Part 1
Arandelas Product grade A washers, Part 1
Unterlegscheiben Product grade A washers, Part 1
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 7 / 518
Product grade A washers, Part 2DIN 433 Washers
Rondelles
Rosette
Product grade A washers, Part 2
Product grade A washers, Part 2
Arandelas Product grade A washers, Part 2
Unterlegscheiben Product grade A washers, Part 2
EyeboltsDIN 444 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Eyebolts
Eyebolts
Pasadores, tornillos, bridas Eyebolts
Stiftbolzen, Schrauben, Bolzen
Eyebolts
Tab washers with long and short tab at right anglesDIN 463 Washers
Rondelles
Rosette
Tab washers with long and short tab at right angles
Tab washers with long and short tab at right angles
Arandelas Tab washers with long and short tab at right angles
Unterlegscheiben Tab washers with long and short tab at right angles
Knurled thumb screwsDIN 464 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Knurled thumb screws
Knurled thumb screws
Pasadores, tornillos, bridas Knurled thumb screws
Stiftbolzen, Schrauben, Bolzen
Knurled thumb screws
Knurled nuts with collarDIN 466 Nuts
Ecrous
Dadi
Knurled nuts with collar
Knurled nuts with collar
Tuercas Knurled nuts with collar
Muttern Knurled nuts with collar
Weld studsDIN 525 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Weld studs
Weld studs
Pasadores, tornillos, bridas Weld studs
Stiftbolzen, Schrauben, Bolzen
Weld studs
Safety cups for cheese head screws according to DIN 84DIN 526 Washers
Rondelles
Rosette
Safety cups for cheese head screws according to DIN 84
Safety cups for cheese head screws according to DIN 84
Arandelas Safety cups for cheese head screws according to DIN 84
Unterlegscheiben Safety cups for cheese head screws according to DIN 84
Masonry and foundation bolts - Type ADIN 529 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Masonry and foundation bolts - Type A
Masonry and foundation bolts - Type A
Pasadores, tornillos, bridas Masonry and foundation bolts - Type A
Stiftbolzen, Schrauben, Bolzen
Masonry and foundation bolts - Type A
Masonry and foundation bolts - Type BDIN 529 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Masonry and foundation bolts - Type B
Masonry and foundation bolts - Type B
Pasadores, tornillos, bridas Masonry and foundation bolts - Type B
Stiftbolzen, Schrauben, Bolzen
Masonry and foundation bolts - Type B
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 8 / 518
Masonry and foundation bolts - Type CDIN 529 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Masonry and foundation bolts - Type C
Masonry and foundation bolts - Type C
Pasadores, tornillos, bridas Masonry and foundation bolts - Type C
Stiftbolzen, Schrauben, Bolzen
Masonry and foundation bolts - Type C
Masonry and foundation bolts - Type DDIN 529 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Masonry and foundation bolts - Type D
Masonry and foundation bolts - Type D
Pasadores, tornillos, bridas Masonry and foundation bolts - Type D
Stiftbolzen, Schrauben, Bolzen
Masonry and foundation bolts - Type D
Masonry and foundation bolts - Type EDIN 529 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Masonry and foundation bolts - Type E
Masonry and foundation bolts - Type E
Pasadores, tornillos, bridas Masonry and foundation bolts - Type E
Stiftbolzen, Schrauben, Bolzen
Masonry and foundation bolts - Type E
Masonry and foundation bolts - Type FDIN 529 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Masonry and foundation bolts - Type F
Masonry and foundation bolts - Type F
Pasadores, tornillos, bridas Masonry and foundation bolts - Type F
Stiftbolzen, Schrauben, Bolzen
Masonry and foundation bolts - Type F
Masonry and foundation bolts - Type GDIN 529 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Masonry and foundation bolts - Type G
Masonry and foundation bolts - Type G
Pasadores, tornillos, bridas Masonry and foundation bolts - Type G
Stiftbolzen, Schrauben, Bolzen
Masonry and foundation bolts - Type G
Slotted round nutsDIN 546 Nuts
Ecrous
Dadi
Slotted round nuts
Slotted round nuts
Tuercas Slotted round nuts
Muttern Slotted round nuts
Round nuts with drilled holes in one faceDIN 547 Nuts
Ecrous
Dadi
Round nuts with drilled holes in one face
Round nuts with drilled holes in one face
Tuercas Round nuts with drilled holes in one face
Muttern Round nuts with drilled holes in one face
Round nuts with set pin holes in sideDIN 548 Nuts
Ecrous
Dadi
Round nuts with set pin holes in side
Round nuts with set pin holes in side
Tuercas Round nuts with set pin holes in side
Muttern Round nuts with set pin holes in side
Hexagon head wood screwsDIN 571 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon head wood screws
Hexagon head wood screws
Pasadores, tornillos, bridas Hexagon head wood screws
Stiftbolzen, Schrauben, Bolzen
Hexagon head wood screws
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 9 / 518
Grub screws with thrust pointDIN 6332 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Grub screws with thrust point
Grub screws with thrust point
Pasadores, tornillos, bridas Grub screws with thrust point
Stiftbolzen, Schrauben, Bolzen
Grub screws with thrust point
Clip BoltsDIN 6378 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Clip Bolts
Clip Bolts
Pasadores, tornillos, bridas Clip Bolts
Stiftbolzen, Schrauben, Bolzen
Clip Bolts
Rivet setsDIN 6434 Rivets
Rivets
Rivetti
Rivet sets
Rivet sets
Remaches Rivet sets
Nieten Rivet sets
Knurled thin thumb screwsDIN 653 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Knurled thin thumb screws
Knurled thin thumb screws
Pasadores, tornillos, bridas Knurled thin thumb screws
Stiftbolzen, Schrauben, Bolzen
Knurled thin thumb screws
Round head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded
DIN 660 Rivets
Rivets
Rivetti
Round head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded
Round head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded
Remaches Round head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded
Nieten Round head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded
Round head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk
DIN 660 Rivets
Rivets
Rivetti
Round head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk
Round head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk
Remaches Round head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk
Nieten Round head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk
Countersunk head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded
DIN 661 Rivets
Rivets
Rivetti
Countersunk head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded
Countersunk head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded
Remaches Countersunk head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded
Nieten Countersunk head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded
Countersunk head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk
DIN 661 Rivets
Rivets
Rivetti
Countersunk head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk
Countersunk head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk
Remaches Countersunk head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk
Nieten Countersunk head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 10 / 518
Over-head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded
DIN 662 Rivets
Rivets
Rivetti
Over-head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded
Over-head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded
Remaches Over-head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded
Nieten Over-head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded
Over-head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk
DIN 662 Rivets
Rivets
Rivetti
Over-head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk
Over-head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk
Remaches Over-head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk
Nieten Over-head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk
Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded
DIN 674 Rivets
Rivets
Rivetti
Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded
Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded
Remaches Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded
Nieten Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded
Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk
DIN 674 Rivets
Rivets
Rivetti
Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk
Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk
Remaches Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk
Nieten Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk
Flat countersunk head rivets with nominal diameters from 3 to 5 mmDIN 675 Rivets
Rivets
Rivetti
Flat countersunk head rivets with nominal diameters from 3 to 5 mm
Flat countersunk head rivets with nominal diameters from 3 to 5 mm
Remaches Flat countersunk head rivets with nominal diameters from 3 to 5 mm
Nieten Flat countersunk head rivets with nominal diameters from 3 to 5 mm
Semitubular pan head rivets with nominal diameters from 1.6 to 10 mmDIN 6791 Rivets
Rivets
Rivetti
Semitubular pan head rivets with nominal diameters from 1.6 to 10 mm
Semitubular pan head rivets with nominal diameters from 1.6 to 10 mm
Remaches Semitubular pan head rivets with nominal diameters from 1.6 to 10 mm
Nieten Semitubular pan head rivets with nominal diameters from 1.6 to 10 mm
Conical spring washers for bolt/nut assembliesDIN 6796 Washers
Rondelles
Rosette
Conical spring washers for bolt/nut assemblies
Conical spring washers for bolt/nut assemblies
Arandelas Conical spring washers for bolt/nut assemblies
Unterlegscheiben Conical spring washers for bolt/nut assemblies
Toothed lock washers - Type A, with external teethDIN 6797 Washers
Rondelles
Rosette
Toothed lock washers - Type A, with external teeth
Toothed lock washers - Type A, with external teeth
Arandelas Toothed lock washers - Type A, with external teeth
Unterlegscheiben Toothed lock washers - Type A, with external teeth
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 11 / 518
Toothed lock washers - Type J, with internal teethDIN 6797 Washers
Rondelles
Rosette
Toothed lock washers - Type J, with internal teeth
Toothed lock washers - Type J, with internal teeth
Arandelas Toothed lock washers - Type J, with internal teeth
Unterlegscheiben Toothed lock washers - Type J, with internal teeth
Toothed lock washers - Type V, countersunkDIN 6797 Washers
Rondelles
Rosette
Toothed lock washers - Type V, countersunk
Toothed lock washers - Type V, countersunk
Arandelas Toothed lock washers - Type V, countersunk
Unterlegscheiben Toothed lock washers - Type V, countersunk
Serrated lock washers - Type A, with external teethDIN 6798 Washers
Rondelles
Rosette
Serrated lock washers - Type A, with external teeth
Serrated lock washers - Type A, with external teeth
Arandelas Serrated lock washers - Type A, with external teeth
Unterlegscheiben Serrated lock washers - Type A, with external teeth
Serrated lock washers - Type J, with internal teethDIN 6798 Washers
Rondelles
Rosette
Serrated lock washers - Type J, with internal teeth
Serrated lock washers - Type J, with internal teeth
Arandelas Serrated lock washers - Type J, with internal teeth
Unterlegscheiben Serrated lock washers - Type J, with internal teeth
Serrated lock washers - Type V, countersunkDIN 6798 Washers
Rondelles
Rosette
Serrated lock washers - Type V, countersunk
Serrated lock washers - Type V, countersunk
Arandelas Serrated lock washers - Type V, countersunk
Unterlegscheiben Serrated lock washers - Type V, countersunk
Nails for assembling timber pallets - Type A, helical threaded shank flat head nail
DIN 68 163 Pins, nails
Goupilles, clous
Perni, chiodi
Nails for assembling timber pallets - Type A, helical threaded shank flat head nail
Nails for assembling timber pallets - Type A, helical threaded shank flat head nail
Pasadores, fiadores Nails for assembling timber pallets - Type A, helical threaded shank flat head nail
Stifte, Ngel Nails for assembling timber pallets - Type A, helical threaded shank flat head nail
Nails for assembling timber pallets - Type K, annular ringed shank flat head nailDIN 68 163 Pins, nails
Goupilles, clous
Perni, chiodi
Nails for assembling timber pallets - Type K, annular ringed shank flat head nail
Nails for assembling timber pallets - Type K, annular ringed shank flat head nail
Pasadores, fiadores Nails for assembling timber pallets - Type K, annular ringed shank flat head nail
Stifte, Ngel Nails for assembling timber pallets - Type K, annular ringed shank flat head nail
Gib-head saddle keysDIN 6881 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Gib-head saddle keys
Gib-head saddle keys
Chavetas y chaveteros Gib-head saddle keys
Keile und Kerbungen Gib-head saddle keys
Saddle keysDIN 6881 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Saddle keys
Saddle keys
Chavetas y chaveteros Saddle keys
Keile und Kerbungen Saddle keys
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 12 / 518
Parallel keysDIN 6883 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel keys
Parallel keys
Chavetas y chaveteros Parallel keys
Keile und Kerbungen Parallel keys
Gib-head parallel keysDIN 6884 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Gib-head parallel keys
Gib-head parallel keys
Chavetas y chaveteros Gib-head parallel keys
Keile und Kerbungen Gib-head parallel keys
Parallel Keys - Type A, round-endedDIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type A, round-ended
Parallel Keys - Type A, round-ended
Chavetas y chaveteros Parallel Keys - Type A, round-ended
Keile und Kerbungen Parallel Keys - Type A, round-ended
Parallel Keys - Type A, round-ended - Part 2DIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type A, round-ended - Part 2
Parallel Keys - Type A, round-ended - Part 2
Chavetas y chaveteros Parallel Keys - Type A, round-ended - Part 2
Keile und Kerbungen Parallel Keys - Type A, round-ended - Part 2
Parallel Keys - Type A, round-ended without retaining screw - Part 3DIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type A, round-ended without retaining screw - Part 3
Parallel Keys - Type A, round-ended without retaining screw - Part 3
Chavetas y chaveteros Parallel Keys - Type A, round-ended without retaining screw - Part 3
Keile und Kerbungen Parallel Keys - Type A, round-ended without retaining screw - Part 3
Parallel Keys - Type B, square-endedDIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type B, square-ended
Parallel Keys - Type B, square-ended
Chavetas y chaveteros Parallel Keys - Type B, square-ended
Keile und Kerbungen Parallel Keys - Type B, square-ended
Parallel Keys - Type B, square-ended without retaining screw - Part 3DIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type B, square-ended without retaining screw - Part 3
Parallel Keys - Type B, square-ended without retaining screw - Part 3
Chavetas y chaveteros Parallel Keys - Type B, square-ended without retaining screw - Part 3
Keile und Kerbungen Parallel Keys - Type B, square-ended without retaining screw - Part 3
Parallel Keys - Type C, round-endedDIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type C, round-ended
Parallel Keys - Type C, round-ended
Chavetas y chaveteros Parallel Keys - Type C, round-ended
Keile und Kerbungen Parallel Keys - Type C, round-ended
Parallel Keys - Type C, round-ended - Part 2DIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type C, round-ended - Part 2
Parallel Keys - Type C, round-ended - Part 2
Chavetas y chaveteros Parallel Keys - Type C, round-ended - Part 2
Keile und Kerbungen Parallel Keys - Type C, round-ended - Part 2
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 13 / 518
Parallel Keys - Type C, round-ended for retaining screw - Part 3DIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type C, round-ended for retaining screw - Part 3
Parallel Keys - Type C, round-ended for retaining screw - Part 3
Chavetas y chaveteros Parallel Keys - Type C, round-ended for retaining screw - Part 3
Keile und Kerbungen Parallel Keys - Type C, round-ended for retaining screw - Part 3
Parallel Keys - Type D, square-endedDIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type D, square-ended
Parallel Keys - Type D, square-ended
Chavetas y chaveteros Parallel Keys - Type D, square-ended
Keile und Kerbungen Parallel Keys - Type D, square-ended
Parallel Keys - Type E, round-ended with holes for 2 retaining screwsDIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type E, round-ended with holes for 2 retaining screws
Parallel Keys - Type E, round-ended with holes for 2 retaining screws
Chavetas y chaveteros Parallel Keys - Type E, round-ended with holes for 2 retaining screws
Keile und Kerbungen Parallel Keys - Type E, round-ended with holes for 2 retaining screws
Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 2DIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 2
Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 2
Chavetas y chaveteros Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 2
Keile und Kerbungen Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 2
Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 3DIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 3
Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 3
Chavetas y chaveteros Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 3
Keile und Kerbungen Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 3
Parallel Keys - Type F, square-ended with holes for 2 retaining screwsDIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type F, square-ended with holes for 2 retaining screws
Parallel Keys - Type F, square-ended with holes for 2 retaining screws
Chavetas y chaveteros Parallel Keys - Type F, square-ended with holes for 2 retaining screws
Keile und Kerbungen Parallel Keys - Type F, square-ended with holes for 2 retaining screws
Parallel Keys - Type G, square-ended with chamfer and hole for 1 retaining screw
DIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type G, square-ended with chamfer and hole for 1 retaining screw
Parallel Keys - Type G, square-ended with chamfer and hole for 1 retaining screw
Chavetas y chaveteros Parallel Keys - Type G, square-ended with chamfer and hole for 1 retaining screw
Keile und Kerbungen Parallel Keys - Type G, square-ended with chamfer and hole for 1 retaining screw
Parallel Keys - Type H, square-ended with chamfer and holes for 2 retaining screws
DIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type H, square-ended with chamfer and holes for 2 retaining screws
Parallel Keys - Type H, square-ended with chamfer and holes for 2 retaining screws
Chavetas y chaveteros Parallel Keys - Type H, square-ended with chamfer and holes for 2 retaining screws
Keile und Kerbungen Parallel Keys - Type H, square-ended with chamfer and holes for 2 retaining screws
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 14 / 518
Parallel Keys - Type J, square-ended with chamfer and hole for 1 spring dewel sleeve
DIN 6885 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Parallel Keys - Type J, square-ended with chamfer and hole for 1 spring dewel sleeve
Parallel Keys - Type J, square-ended with chamfer and hole for 1 spring dewel sleeve
Chavetas y chaveteros Parallel Keys - Type J, square-ended with chamfer and hole for 1 spring dewel sleeve
Keile und Kerbungen Parallel Keys - Type J, square-ended with chamfer and hole for 1 spring dewel sleeve
Taper Keys - Type A, rounded-endedDIN 6886 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Taper Keys - Type A, rounded-ended
Taper Keys - Type A, rounded-ended
Chavetas y chaveteros Taper Keys - Type A, rounded-ended
Keile und Kerbungen Taper Keys - Type A, rounded-ended
Taper Keys - Type B, square-endedDIN 6886 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Taper Keys - Type B, square-ended
Taper Keys - Type B, square-ended
Chavetas y chaveteros Taper Keys - Type B, square-ended
Keile und Kerbungen Taper Keys - Type B, square-ended
Taper Key with gib-headDIN 6887 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Taper Key with gib-head
Taper Key with gib-head
Chavetas y chaveteros Taper Key with gib-head
Keile und Kerbungen Taper Key with gib-head
Woodruff keys - Allocation IDIN 6888 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Woodruff keys - Allocation I
Woodruff keys - Allocation I
Chavetas y chaveteros Woodruff keys - Allocation I
Keile und Kerbungen Woodruff keys - Allocation I
Woodruff keys - Allocation IIDIN 6888 Keys and keyways, splines
Clavetages et cannelures
Chiavette, Linguette e profili scanalati
Woodruff keys - Allocation II
Woodruff keys - Allocation II
Chavetas y chaveteros Woodruff keys - Allocation II
Keile und Kerbungen Woodruff keys - Allocation II
Curved spring washersDIN 6904 Washers
Rondelles
Rosette
Curved spring washers
Curved spring washers
Arandelas Curved spring washers
Unterlegscheiben Curved spring washers
Spring lock washersDIN 6905 Washers
Rondelles
Rosette
Spring lock washers
Spring lock washers
Arandelas Spring lock washers
Unterlegscheiben Spring lock washers
Serrated lock washers with external teethDIN 6907 Washers
Rondelles
Rosette
Serrated lock washers with external teeth
Serrated lock washers with external teeth
Arandelas Serrated lock washers with external teeth
Unterlegscheiben Serrated lock washers with external teeth
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 15 / 518
Conical spring washers for screw and washer assembliesDIN 6908 Washers
Rondelles
Rosette
Conical spring washers for screw and washer assemblies
Conical spring washers for screw and washer assemblies
Arandelas Conical spring washers for screw and washer assemblies
Unterlegscheiben Conical spring washers for screw and washer assemblies
Hexagon socket thin head cap screwsDIN 6912 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon socket thin head cap screws
Hexagon socket thin head cap screws
Pasadores, tornillos, bridas Hexagon socket thin head cap screws
Stiftbolzen, Schrauben, Bolzen
Hexagon socket thin head cap screws
High-strength hexagon head boltsDIN 6914 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
High-strength hexagon head bolts
High-strength hexagon head bolts
Pasadores, tornillos, bridas High-strength hexagon head bolts
Stiftbolzen, Schrauben, Bolzen
High-strength hexagon head bolts
Hexagon flange bolts DIN 6921DIN 6921 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon flange bolts DIN 6921
Hexagon flange bolts DIN 6921
Pasadores, tornillos, bridas Hexagon flange bolts DIN 6921
Stiftbolzen, Schrauben, Bolzen
Hexagon flange bolts DIN 6921
Hexagon flange bolts DIN 6922DIN 6922 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon flange bolts DIN 6922
Hexagon flange bolts DIN 6922
Pasadores, tornillos, bridas Hexagon flange bolts DIN 6922
Stiftbolzen, Schrauben, Bolzen
Hexagon flange bolts DIN 6922
Hexagon washer head tapping screwsDIN 6928 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon washer head tapping screws
Hexagon washer head tapping screws
Pasadores, tornillos, bridas Hexagon washer head tapping screws
Stiftbolzen, Schrauben, Bolzen
Hexagon washer head tapping screws
Compression rivets - Type A, with flat headDIN 7331 Rivets
Rivets
Rivetti
Compression rivets - Type A, with flat head
Compression rivets - Type A, with flat head
Remaches Compression rivets - Type A, with flat head
Nieten Compression rivets - Type A, with flat head
Compression rivets - Type B, with truss headDIN 7331 Rivets
Rivets
Rivetti
Compression rivets - Type B, with truss head
Compression rivets - Type B, with truss head
Remaches Compression rivets - Type B, with truss head
Nieten Compression rivets - Type B, with truss head
Brake and clutch lining rivets - Type A, solid rivetDIN 7338 Rivets
Rivets
Rivetti
Brake and clutch lining rivets - Type A, solid rivet
Brake and clutch lining rivets - Type A, solid rivet
Remaches Brake and clutch lining rivets - Type A, solid rivet
Nieten Brake and clutch lining rivets - Type A, solid rivet
Brake and clutch lining rivets - Type B, semitubular rivetDIN 7338 Rivets
Rivets
Rivetti
Brake and clutch lining rivets - Type B, semitubular rivet
Brake and clutch lining rivets - Type B, semitubular rivet
Remaches Brake and clutch lining rivets - Type B, semitubular rivet
Nieten Brake and clutch lining rivets - Type B, semitubular rivet
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 16 / 518
Brake and clutch lining rivets - Type C, tubular rivet drawn from stripDIN 7338 Rivets
Rivets
Rivetti
Brake and clutch lining rivets - Type C, tubular rivet drawn from strip
Brake and clutch lining rivets - Type C, tubular rivet drawn from strip
Remaches Brake and clutch lining rivets - Type C, tubular rivet drawn from strip
Nieten Brake and clutch lining rivets - Type C, tubular rivet drawn from strip
Brake and clutch lining rivets - Type C, tubular rivet made from wireDIN 7338 Rivets
Rivets
Rivetti
Brake and clutch lining rivets - Type C, tubular rivet made from wire
Brake and clutch lining rivets - Type C, tubular rivet made from wire
Remaches Brake and clutch lining rivets - Type C, tubular rivet made from wire
Nieten Brake and clutch lining rivets - Type C, tubular rivet made from wire
One-piece tubular rivets drawn from stripDIN 7339 Rivets
Rivets
Rivetti
One-piece tubular rivets drawn from strip
One-piece tubular rivets drawn from strip
Remaches One-piece tubular rivets drawn from strip
Nieten One-piece tubular rivets drawn from strip
Tubular rivets made from tube - Type A, with pan headDIN 7340 Rivets
Rivets
Rivetti
Tubular rivets made from tube - Type A, with pan head
Tubular rivets made from tube - Type A, with pan head
Remaches Tubular rivets made from tube - Type A, with pan head
Nieten Tubular rivets made from tube - Type A, with pan head
Tubular rivets made from tube - Type B, with rolled back round headDIN 7340 Rivets
Rivets
Rivetti
Tubular rivets made from tube - Type B, with rolled back round head
Tubular rivets made from tube - Type B, with rolled back round head
Remaches Tubular rivets made from tube - Type B, with rolled back round head
Nieten Tubular rivets made from tube - Type B, with rolled back round head
Rivet pins - Type ADIN 7341 Rivets
Rivets
Rivetti
Rivet pins - Type A
Rivet pins - Type A
Remaches Rivet pins - Type A
Nieten Rivet pins - Type A
Rivet pins - Type BDIN 7341 Rivets
Rivets
Rivetti
Rivet pins - Type B
Rivet pins - Type B
Remaches Rivet pins - Type B
Nieten Rivet pins - Type B
Plain washers for bolts with heavy clamping sleevesDIN 7349 Washers
Rondelles
Rosette
Plain washers for bolts with heavy clamping sleeves
Plain washers for bolts with heavy clamping sleeves
Arandelas Plain washers for bolts with heavy clamping sleeves
Unterlegscheiben Plain washers for bolts with heavy clamping sleeves
Light-duty hexagon head screw plugsDIN 7604 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Light-duty hexagon head screw plugs
Light-duty hexagon head screw plugs
Pasadores, tornillos, bridas Light-duty hexagon head screw plugs
Stiftbolzen, Schrauben, Bolzen
Light-duty hexagon head screw plugs
Cross recessed raised countersunk head wood screws - Type HDIN 7665 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Cross recessed raised countersunk head wood screws - Type H
Cross recessed raised countersunk head wood screws - Type H
Pasadores, tornillos, bridas Cross recessed raised countersunk head wood screws - Type H
Stiftbolzen, Schrauben, Bolzen
Cross recessed raised countersunk head wood screws - Type H
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 17 / 518
Cross recessed raised countersunk head wood screws - Type ZDIN 7665 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Cross recessed raised countersunk head wood screws - Type Z
Cross recessed raised countersunk head wood screws - Type Z
Pasadores, tornillos, bridas Cross recessed raised countersunk head wood screws - Type Z
Stiftbolzen, Schrauben, Bolzen
Cross recessed raised countersunk head wood screws - Type Z
Reduced shank bolts and screws with coarse thread - Head style ADIN 7964 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Reduced shank bolts and screws with coarse thread - Head style A
Reduced shank bolts and screws with coarse thread - Head style A
Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style A
Stiftbolzen, Schrauben, Bolzen
Reduced shank bolts and screws with coarse thread - Head style A
Reduced shank bolts and screws with coarse thread - Head style BDIN 7964 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Reduced shank bolts and screws with coarse thread - Head style B
Reduced shank bolts and screws with coarse thread - Head style B
Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style B
Stiftbolzen, Schrauben, Bolzen
Reduced shank bolts and screws with coarse thread - Head style B
Reduced shank bolts and screws with coarse thread - Head style C - Type HDIN 7964 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Reduced shank bolts and screws with coarse thread - Head style C - Type H
Reduced shank bolts and screws with coarse thread - Head style C - Type H
Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style C - Type H
Stiftbolzen, Schrauben, Bolzen
Reduced shank bolts and screws with coarse thread - Head style C - Type H
Reduced shank bolts and screws with coarse thread - Head style C - Type ZDIN 7964 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Reduced shank bolts and screws with coarse thread - Head style C - Type Z
Reduced shank bolts and screws with coarse thread - Head style C - Type Z
Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style C - Type Z
Stiftbolzen, Schrauben, Bolzen
Reduced shank bolts and screws with coarse thread - Head style C - Type Z
Reduced shank bolts and screws with coarse thread - Head style D2DIN 7964 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Reduced shank bolts and screws with coarse thread - Head style D2
Reduced shank bolts and screws with coarse thread - Head style D2
Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style D2
Stiftbolzen, Schrauben, Bolzen
Reduced shank bolts and screws with coarse thread - Head style D2
Reduced shank bolts and screws with coarse thread - Head style EDIN 7964 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Reduced shank bolts and screws with coarse thread - Head style E
Reduced shank bolts and screws with coarse thread - Head style E
Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style E
Stiftbolzen, Schrauben, Bolzen
Reduced shank bolts and screws with coarse thread - Head style E
Reduced shank bolts and screws with coarse thread - Head style FDIN 7964 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Reduced shank bolts and screws with coarse thread - Head style F
Reduced shank bolts and screws with coarse thread - Head style F
Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style F
Stiftbolzen, Schrauben, Bolzen
Reduced shank bolts and screws with coarse thread - Head style F
Self locking counter nutsDIN 7967 Nuts
Ecrous
Dadi
Self locking counter nuts
Self locking counter nuts
Tuercas Self locking counter nuts
Muttern Self locking counter nuts
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 18 / 518
Hexagon fit bolts for structural steel boltingDIN 7968 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon fit bolts for structural steel bolting
Hexagon fit bolts for structural steel bolting
Pasadores, tornillos, bridas Hexagon fit bolts for structural steel bolting
Stiftbolzen, Schrauben, Bolzen
Hexagon fit bolts for structural steel bolting
Slotted countersunk head screws for structural steel bolting for supply with nutDIN 7969 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted countersunk head screws for structural steel bolting for supply with nut
Slotted countersunk head screws for structural steel bolting for supply with nut
Pasadores, tornillos, bridas Slotted countersunk head screws for structural steel bolting for supply with nut
Stiftbolzen, Schrauben, Bolzen
Slotted countersunk head screws for structural steel bolting for supply with nut
Slotted countersunk head screws for structural steel bolting for supply without nut
DIN 7969 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted countersunk head screws for structural steel bolting for supply without nut
Slotted countersunk head screws for structural steel bolting for supply without nut
Pasadores, tornillos, bridas Slotted countersunk head screws for structural steel bolting for supply without nut
Stiftbolzen, Schrauben, Bolzen
Slotted countersunk head screws for structural steel bolting for supply without nut
Special foundation boltsDIN 797 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Special foundation bolts
Special foundation bolts
Pasadores, tornillos, bridas Special foundation bolts
Stiftbolzen, Schrauben, Bolzen
Special foundation bolts
Hexagon head bolts for structural steel bolting for supply with nutDIN 7990 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon head bolts for structural steel bolting for supply with nut
Hexagon head bolts for structural steel bolting for supply with nut
Pasadores, tornillos, bridas Hexagon head bolts for structural steel bolting for supply with nut
Stiftbolzen, Schrauben, Bolzen
Hexagon head bolts for structural steel bolting for supply with nut
T-Head Bolts with Large HeadDIN 7992 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
T-Head Bolts with Large Head
T-Head Bolts with Large Head
Pasadores, tornillos, bridas T-Head Bolts with Large Head
Stiftbolzen, Schrauben, Bolzen
T-Head Bolts with Large Head
Round wire snap rings and snap ring grooves for shafts and bores - Type ADIN 7993 Rings, bushes, sleeves, collars
Anneaux, douilles, manchons, colliers
Anelli, rasamenti, manicotti, collari
Round wire snap rings and snap ring grooves for shafts and bores - Type A
Round wire snap rings and snap ring grooves for shafts and bores - Type A
Anillos, casquillos, guardapolvos y collarines
Round wire snap rings and snap ring grooves for shafts and bores - Type A
Ringe, Buchsen, Muffen, Schellen
Round wire snap rings and snap ring grooves for shafts and bores - Type A
Round wire snap rings and snap ring grooves for shafts and bores - Type BDIN 7993 Rings, bushes, sleeves, collars
Anneaux, douilles, manchons, colliers
Anelli, rasamenti, manicotti, collari
Round wire snap rings and snap ring grooves for shafts and bores - Type B
Round wire snap rings and snap ring grooves for shafts and bores - Type B
Anillos, casquillos, guardapolvos y collarines
Round wire snap rings and snap ring grooves for shafts and bores - Type B
Ringe, Buchsen, Muffen, Schellen
Round wire snap rings and snap ring grooves for shafts and bores - Type B
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 19 / 518
Cross recessed pan head wood screws - Type HDIN 7996 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Cross recessed pan head wood screws - Type H
Cross recessed pan head wood screws - Type H
Pasadores, tornillos, bridas Cross recessed pan head wood screws - Type H
Stiftbolzen, Schrauben, Bolzen
Cross recessed pan head wood screws - Type H
Cross recessed pan head wood screws - Type ZDIN 7996 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Cross recessed pan head wood screws - Type Z
Cross recessed pan head wood screws - Type Z
Pasadores, tornillos, bridas Cross recessed pan head wood screws - Type Z
Stiftbolzen, Schrauben, Bolzen
Cross recessed pan head wood screws - Type Z
Cross recessed countersunk head wood screws - Type HDIN 7997 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Cross recessed countersunk head wood screws - Type H
Cross recessed countersunk head wood screws - Type H
Pasadores, tornillos, bridas Cross recessed countersunk head wood screws - Type H
Stiftbolzen, Schrauben, Bolzen
Cross recessed countersunk head wood screws - Type H
Cross recessed countersunk head wood screws - Type ZDIN 7997 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Cross recessed countersunk head wood screws - Type Z
Cross recessed countersunk head wood screws - Type Z
Pasadores, tornillos, bridas Cross recessed countersunk head wood screws - Type Z
Stiftbolzen, Schrauben, Bolzen
Cross recessed countersunk head wood screws - Type Z
High-strength hexagon fit boltsDIN 7999 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
High-strength hexagon fit bolts
High-strength hexagon fit bolts
Pasadores, tornillos, bridas High-strength hexagon fit bolts
Stiftbolzen, Schrauben, Bolzen
High-strength hexagon fit bolts
Slotted cheese head screws for fine mechanics - Type ADIN 8243 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted cheese head screws for fine mechanics - Type A
Slotted cheese head screws for fine mechanics - Type A
Pasadores, tornillos, bridas Slotted cheese head screws for fine mechanics - Type A
Stiftbolzen, Schrauben, Bolzen
Slotted cheese head screws for fine mechanics - Type A
Slotted cheese head screws for fine mechanics - Type BDIN 8243 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted cheese head screws for fine mechanics - Type B
Slotted cheese head screws for fine mechanics - Type B
Pasadores, tornillos, bridas Slotted cheese head screws for fine mechanics - Type B
Stiftbolzen, Schrauben, Bolzen
Slotted cheese head screws for fine mechanics - Type B
Slotted cheese head screws for fine mechanics - Type CDIN 8243 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted cheese head screws for fine mechanics - Type C
Slotted cheese head screws for fine mechanics - Type C
Pasadores, tornillos, bridas Slotted cheese head screws for fine mechanics - Type C
Stiftbolzen, Schrauben, Bolzen
Slotted cheese head screws for fine mechanics - Type C
Slotted countersunk (flat) head screws for fine mechanicsDIN 8245 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted countersunk (flat) head screws for fine mechanics
Slotted countersunk (flat) head screws for fine mechanics
Pasadores, tornillos, bridas Slotted countersunk (flat) head screws for fine mechanics
Stiftbolzen, Schrauben, Bolzen
Slotted countersunk (flat) head screws for fine mechanics
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 20 / 518
Studs DIN 835DIN 835 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Studs DIN 835
Studs DIN 835
Pasadores, tornillos, bridas Studs DIN 835
Stiftbolzen, Schrauben, Bolzen
Studs DIN 835
Hexagon socket pipe plugsDIN 906 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon socket pipe plugs
Hexagon socket pipe plugs
Pasadores, tornillos, bridas Hexagon socket pipe plugs
Stiftbolzen, Schrauben, Bolzen
Hexagon socket pipe plugs
Hexagon socket screw plugsDIN 908 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon socket screw plugs
Hexagon socket screw plugs
Pasadores, tornillos, bridas Hexagon socket screw plugs
Stiftbolzen, Schrauben, Bolzen
Hexagon socket screw plugs
Hexagon head pipe plugsDIN 909 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon head pipe plugs
Hexagon head pipe plugs
Pasadores, tornillos, bridas Hexagon head pipe plugs
Stiftbolzen, Schrauben, Bolzen
Hexagon head pipe plugs
Heavy-duty hexagon head screw plugsDIN 910 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Heavy-duty hexagon head screw plugs
Heavy-duty hexagon head screw plugs
Pasadores, tornillos, bridas Heavy-duty hexagon head screw plugs
Stiftbolzen, Schrauben, Bolzen
Heavy-duty hexagon head screw plugs
Slotted pan head screws with small headDIN 920 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted pan head screws with small head
Slotted pan head screws with small head
Pasadores, tornillos, bridas Slotted pan head screws with small head
Stiftbolzen, Schrauben, Bolzen
Slotted pan head screws with small head
Slotted pan head screws with large headDIN 921 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted pan head screws with large head
Slotted pan head screws with large head
Pasadores, tornillos, bridas Slotted pan head screws with large head
Stiftbolzen, Schrauben, Bolzen
Slotted pan head screws with large head
Slotted pan head screws with small head and full dog pointDIN 922 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted pan head screws with small head and full dog point
Slotted pan head screws with small head and full dog point
Pasadores, tornillos, bridas Slotted pan head screws with small head and full dog point
Stiftbolzen, Schrauben, Bolzen
Slotted pan head screws with small head and full dog point
Slotted pan head screws with shoulderDIN 923 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted pan head screws with shoulder
Slotted pan head screws with shoulder
Pasadores, tornillos, bridas Slotted pan head screws with shoulder
Stiftbolzen, Schrauben, Bolzen
Slotted pan head screws with shoulder
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 21 / 518
Slotted raised countersunk head screws with full dog pointDIN 924 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted raised countersunk head screws with full dog point
Slotted raised countersunk head screws with full dog point
Pasadores, tornillos, bridas Slotted raised countersunk head screws with full dog point
Stiftbolzen, Schrauben, Bolzen
Slotted raised countersunk head screws with full dog point
Slotted countersunk head screws with full dog pointDIN 925 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted countersunk head screws with full dog point
Slotted countersunk head screws with full dog point
Pasadores, tornillos, bridas Slotted countersunk head screws with full dog point
Stiftbolzen, Schrauben, Bolzen
Slotted countersunk head screws with full dog point
Slotted set screws with dog pointDIN 926 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted set screws with dog point
Slotted set screws with dog point
Pasadores, tornillos, bridas Slotted set screws with dog point
Stiftbolzen, Schrauben, Bolzen
Slotted set screws with dog point
Slotted shoulder screwsDIN 927 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted shoulder screws
Slotted shoulder screws
Pasadores, tornillos, bridas Slotted shoulder screws
Stiftbolzen, Schrauben, Bolzen
Slotted shoulder screws
Square weld nutsDIN 928 Nuts
Ecrous
Dadi
Square weld nuts
Square weld nuts
Tuercas Square weld nuts
Muttern Square weld nuts
Tab washers with long tabDIN 93 Washers
Rondelles
Rosette
Tab washers with long tab
Tab washers with long tab
Arandelas Tab washers with long tab
Unterlegscheiben Tab washers with long tab
M42 to M160 x 6 hexagon head boltsDIN 931-2 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
M42 to M160 x 6 hexagon head bolts
M42 to M160 x 6 hexagon head bolts
Pasadores, tornillos, bridas M42 to M160 x 6 hexagon head bolts
Stiftbolzen, Schrauben, Bolzen
M42 to M160 x 6 hexagon head bolts
Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread, Product grades A and B
DIN 935 Nuts
Ecrous
Dadi
Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread, Product grades A and B
Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread, Product grades A and B
Tuercas Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread, Product grades A and B
Muttern Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread, Product grades A and B
Hexagon slotted nuts with metric coarse pitch thread, product grades CDIN 935 Nuts
Ecrous
Dadi
Hexagon slotted nuts with metric coarse pitch thread, product grades C
Hexagon slotted nuts with metric coarse pitch thread, product grades C
Tuercas Hexagon slotted nuts with metric coarse pitch thread, product grades C
Muttern Hexagon slotted nuts with metric coarse pitch thread, product grades C
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 22 / 518
Studs DIN 938DIN 938 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Studs DIN 938
Studs DIN 938
Pasadores, tornillos, bridas Studs DIN 938
Stiftbolzen, Schrauben, Bolzen
Studs DIN 938
Studs DIN 939DIN 939 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Studs DIN 939
Studs DIN 939
Pasadores, tornillos, bridas Studs DIN 939
Stiftbolzen, Schrauben, Bolzen
Studs DIN 939
Studs DIN 940DIN 940 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Studs DIN 940
Studs DIN 940
Pasadores, tornillos, bridas Studs DIN 940
Stiftbolzen, Schrauben, Bolzen
Studs DIN 940
Metric interference-fit thread studs DIN 949-1DIN 949-1 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Metric interference-fit thread studs DIN 949-1
Metric interference-fit thread studs DIN 949-1
Pasadores, tornillos, bridas Metric interference-fit thread studs DIN 949-1
Stiftbolzen, Schrauben, Bolzen
Metric interference-fit thread studs DIN 949-1
Metric interference-fit thread studs DIN 949-2DIN 949-2 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Metric interference-fit thread studs DIN 949-2
Metric interference-fit thread studs DIN 949-2
Pasadores, tornillos, bridas Metric interference-fit thread studs DIN 949-2
Stiftbolzen, Schrauben, Bolzen
Metric interference-fit thread studs DIN 949-2
Slotted raised countersunk (oval) head wood screwsDIN 95 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted raised countersunk (oval) head wood screws
Slotted raised countersunk (oval) head wood screws
Pasadores, tornillos, bridas Slotted raised countersunk (oval) head wood screws
Stiftbolzen, Schrauben, Bolzen
Slotted raised countersunk (oval) head wood screws
Slotted round head wood screwsDIN 96 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted round head wood screws
Slotted round head wood screws
Pasadores, tornillos, bridas Slotted round head wood screws
Stiftbolzen, Schrauben, Bolzen
Slotted round head wood screws
Product grade A cross recessed pan head screws with collarDIN 967 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Product grade A cross recessed pan head screws with collar
Product grade A cross recessed pan head screws with collar
Pasadores, tornillos, bridas Product grade A cross recessed pan head screws with collar
Stiftbolzen, Schrauben, Bolzen
Product grade A cross recessed pan head screws with collar
Cross recessed pan head tapping screws with collar - Type HDIN 968 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Cross recessed pan head tapping screws with collar - Type H
Cross recessed pan head tapping screws with collar - Type H
Pasadores, tornillos, bridas Cross recessed pan head tapping screws with collar - Type H
Stiftbolzen, Schrauben, Bolzen
Cross recessed pan head tapping screws with collar - Type H
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 23 / 518
Cross recessed pan head tapping screws with collar - Type ZDIN 968 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Cross recessed pan head tapping screws with collar - Type Z
Cross recessed pan head tapping screws with collar - Type Z
Pasadores, tornillos, bridas Cross recessed pan head tapping screws with collar - Type Z
Stiftbolzen, Schrauben, Bolzen
Cross recessed pan head tapping screws with collar - Type Z
Slotted countersunk (flat) head wood screwsDIN 97 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Slotted countersunk (flat) head wood screws
Slotted countersunk (flat) head wood screws
Pasadores, tornillos, bridas Slotted countersunk (flat) head wood screws
Stiftbolzen, Schrauben, Bolzen
Slotted countersunk (flat) head wood screws
Retaining rings with lugs for use on shafts (external circlips)DIN 983 Rings, bushes, sleeves, collars
Anneaux, douilles, manchons, colliers
Anelli, rasamenti, manicotti, collari
Retaining rings with lugs for use on shafts (external circlips)
Retaining rings with lugs for use on shafts (external circlips)
Anillos, casquillos, guardapolvos y collarines
Retaining rings with lugs for use on shafts (external circlips)
Ringe, Buchsen, Muffen, Schellen
Retaining rings with lugs for use on shafts (external circlips)
Spring retaining rings with lugs for use in bores (internal circlips)DIN 984 Rings, bushes, sleeves, collars
Anneaux, douilles, manchons, colliers
Anelli, rasamenti, manicotti, collari
Spring retaining rings with lugs for use in bores (internal circlips)
Spring retaining rings with lugs for use in bores (internal circlips)
Anillos, casquillos, guardapolvos y collarines
Spring retaining rings with lugs for use in bores (internal circlips)
Ringe, Buchsen, Muffen, Schellen
Spring retaining rings with lugs for use in bores (internal circlips)
Shim ringsDIN 988 Washers
Rondelles
Rosette
Shim rings
Shim rings
Arandelas Shim rings
Unterlegscheiben Shim rings
Supporting ringsDIN 988 Washers
Rondelles
Rosette
Supporting rings
Supporting rings
Arandelas Supporting rings
Unterlegscheiben Supporting rings
Taper pins, unhardened - Type A, ground pinsDIN EN 22 339 Pins, nails
Goupilles, clous
Perni, chiodi
Taper pins, unhardened - Type A, ground pins
Taper pins, unhardened - Type A, ground pins
Pasadores, fiadores Taper pins, unhardened - Type A, ground pins
Stifte, Ngel Taper pins, unhardened - Type A, ground pins
Taper pins, unhardened - Type B, turned pinsDIN EN 22 339 Pins, nails
Goupilles, clous
Perni, chiodi
Taper pins, unhardened - Type B, turned pins
Taper pins, unhardened - Type B, turned pins
Pasadores, fiadores Taper pins, unhardened - Type B, turned pins
Stifte, Ngel Taper pins, unhardened - Type B, turned pins
Clevis pins without head - Type A, Without split pin holesDIN EN 22340 Pins, nails
Goupilles, clous
Perni, chiodi
Clevis pins without head - Type A, Without split pin holes
Clevis pins without head - Type A, Without split pin holes
Pasadores, fiadores Clevis pins without head - Type A, Without split pin holes
Stifte, Ngel Clevis pins without head - Type A, Without split pin holes
Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com
Part nameManufacturer Applicable Standard(s)
List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category
Page 24 / 518
Clevis pins without head - Type B, With split pin holesDIN EN 22340 Pins, nails
Goupilles, clous
Perni, chiodi
Clevis pins without head - Type B, With split pin holes
Clevis pins without head - Type B, With split pin holes
Pasadores, fiadores Clevis pins without head - Type B, With split pin holes
Stifte, Ngel Clevis pins without head - Type B, With split pin holes
Clevis pins with head - Type A, Without split pin holesDIN EN 22341 Pins, nails
Goupilles, clous
Perni, chiodi
Clevis pins with head - Type A, Without split pin holes
Clevis pins with head - Type A, Without split pin holes
Pasadores, fiadores Clevis pins with head - Type A, Without split pin holes
Stifte, Ngel Clevis pins with head - Type A, Without split pin holes
Clevis pins with head - Type B, With split pin holesDIN EN 22341 Pins, nails
Goupilles, clous
Perni, chiodi
Clevis pins with head - Type B, With split pin holes
Clevis pins with head - Type B, With split pin holes
Pasadores, fiadores Clevis pins with head - Type B, With split pin holes
Stifte, Ngel Clevis pins with head - Type B, With split pin holes
Hexagon head boltsDIN EN 24014 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon head bolts
Hexagon head bolts
Pasadores, tornillos, bridas Hexagon head bolts
Stiftbolzen, Schrauben, Bolzen
Hexagon head bolts
Hexagon head bolts - Reduced shankDIN EN 24015 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon head bolts - Reduced shank
Hexagon head bolts - Reduced shank
Pasadores, tornillos, bridas Hexagon head bolts - Reduced shank
Stiftbolzen, Schrauben, Bolzen
Hexagon head bolts - Reduced shank
Hexagon head bolts ISO 4016DIN EN 24016 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon head bolts ISO 4016
Hexagon head bolts ISO 4016
Pasadores, tornillos, bridas Hexagon head bolts ISO 4016
Stiftbolzen, Schrauben, Bolzen
Hexagon head bolts ISO 4016
Hexagon head screws ISO 4017DIN EN 24017 Bolts, screws, studs
Boulons, vis, goujons
Bulloni, viti, tiranti
Hexagon head screws ISO 4017
Hexagon head screws ISO 4017
Pasadores, tornillos, bridas Hexagon head screws ISO 4017
Stiftbolzen, Schrauben, Bolzen
He