gerflorusa.com

DLW LINOLEUM DRY-TEX SYSTEM

THE CURE FOR HIGH-MOISTURE SUBFLOORS

Time is Everything.

A bond like no otherGerflor first introduced the revolutionary Dry-Tex System for Taraflex™ flooring in 2009. It is the only moisture-mitigation system integrated into the floor backing with a one-step, full-spread adhesive installation. The result is a floor that will not shift or curl under rolling loads, bubble or mold.

This is how the Dry-Tex System for linoleum works:JuteDTx™ is Gerflor’s proprietary linoleum backing composed of natural woven jute mesh providing stability and Dry-Tex properties.Gerpur™ is a patented, moisture-cured adhesive that reacts with humidity to create a moisture resistant bond. In fact, the higher the moisture content, the stronger Gerpur bonds.

Together, this ONE-STEP system is proven to resist up to 100% RH/25 lb moisture and up to 14% pH*

How it works:

Construction timelines are getting shorter, meaning less time for slabs to dry. Don’t risk a moisture related floor issue. Instead, specify the Gerflor Dry-Tex System: the only integrated full-spread adhesive and flooring system that will not be affected by moisture. No bubbles, shifting or mold – just a beautiful linoleum floor for years to come.

* The 100% RH limit is guaranteed when following the installation guidelines on gerflorusa.com

NO MOLD: Eliminates risk of trapping moisture

Excellent bond even under rolling loads

Most proven method for reducing flooring problems

Full-Spread Adhesive Provides:

u Avoid unexpected costs, delays or extra steps

u Eliminate costly third-party mitigation systems

Save time and money:

Over 3.5 million sq ft of Gerflor

Dry-Tex installed in the USA with

no failures.

u KEEPS PROJECTS ON SCHEDULE The Gerflor Dry-Tex System can be installed on new slabs weeks earlier and doesn’t require special floor preparation nor third party moisture mitigation systems.

u MOST AFFORDABLE Allows cost savings up to 70% ($7/ft2) compared to third-party mitigation systems.

u 10-YEAR NO MOLD GUARANTEE Your warranty against any post-installation moisture issues.

u 100% RH RESISTANCE: FAST, AFFORDABLE, SIMPLE Same installation steps as any full spread adhesive installation. Follow installation instructions for DLW Linoleum Dry-Tex installations guidelines at gerflorusa.com.

• Don’t forget to order your Gerpatch self-leveling compound

• Requires 100% Gerpur coverage

ONE COMPLETE SYSTEM AGAINST HIGH MOISTURE SUBFLOOR

The highest moisture-toleranceGuaranteed: One system. One trusted supplier. One owner of the warranty: Gerflor USA.

Our entire collection of 43 colors is in stock and ready to ship

Dry-Tex SystemAcrylic Adhesive

100%90%

100%

80%

90%

70%

Relative Humidity (RH) %

0028Dive

12 pH limit 14 pH limit

gerflorusa.com

GERFLOR USA877.437.3567info@gerflorusa.com

Mad

e in

USA

. Jun

e 20

19. G

ENA0

112

Follow us on social media!

The Gerflor Dry-Tex System is the cure for high-moisture subfloors. After 10 years of proven success with Taraflex™, our revolutionary one-step moisture resistant system is now available on the Gerflor DLW Linoleum Landscape collection.

SAMPLES:samples@gerflorusa.com

ORDERS:orders@gerflorusa.com

RECYCLED CONTENT• Up to 40%

WELLNESS• Biophilic design • Naturally

bacteriostatic to limit the spread of infections, ISO 22196 certified at > 99%

RAW MATERIALS• 100% USDA

Certified Bio-Based content

• 80% made of rapidly renewable materials

• REACH compliant

INDOOR AIR QUALITY• FloorScore®

certified• Extremely low VOC

emissions: 100 times better than industry standards (TVOC < 100 μg/m3 after 28 days)

• Blue Angel Certified• No risk of mold

LIFE CYCLE ANALYSIS• Made in an

ISO 14001 and 9001 certified manufacturing plant

• Biodegradable

GERFLOR: ACTIONS SPEAK LOUDER THAN WORDSDLW LINOLEUM