Date post: | 31-Mar-2018 |
Category: |
Documents |
Upload: | truongkhanh |
View: | 217 times |
Download: | 4 times |
Angle probe or Straight probe & protective case.
Transport case provided:
� Radiometry/Photometry
Tangential & residual magnetic field meter.
Analysse is a versatile measuring device which can be used in
every industry, especially in aeronautical; it has a 20-hours
battery life. Backlit LCD screen graphic 128*64 dots.
Displays: average field, true and real peak.
Through menus, various unit scan be choosen : kA/m, A/m,
A/cm, Oe, mT.
Minimum measuring step 10 A/m with 3 significant digits.
Measuring range: +/- 47 kA/m peak.
Curve mode: clear display of the waveform of the field
measured up to 410 Hz and various practical details:
backlighted, auto zeroing to keypad, automatic shutdown, drop-
down menus mode.
Device delivered with transport case, metrological certificate
Cofrac & recent accredited, compliant with NF EN ISO 10012.
New combined radiometer-lux meter
With integration operation (UV dosing)
One probe with both detectors, USB cable connection, alphanumeric
display, interchangeable sensor detectors! Large monochrome LCD screen,
easy settings menus. Flexible and shock-free housing, waterproof sealed
sensors with smooth diffuser for trouble-free operation and minimal
maintenance. Perfect cosine response.
Simultaneous displaying: visible and UV-A light.
Luxmeter range : 0/5300 lux ; Radiometer range 0/100mW/cm²
Luminancemeter 0/1000000cd/m²
Powered by two 9-volt alkaline batteries.
Options:
Radiometer only / Luxmeter only / Luminancemeter / UVA-B-C-Blue radiometers
Babb Co is a « recognized calibrating center » for Spectronics in Europe!
• Luxmeter WI-5027 0 to 50000lux, resolution 1lx:
Read out unit dimensions : 83 x 52 x 20.5mm
Dimensions: 125.5(L) x 72 (w.) x 27 (th.) mm
Weight: 140g approximately (without battery)
Accessories: transport cases, battery, user guide
15, rue des Frères LUMIERE- BP 136- 78 374 PLAISIR CEDEX -FRANCE
TEL : +33(0)1 30 80 81 82 FAX : +33(0)1 30 80 81 99
WEB : www.babbco.fr E-MAIL : [email protected]
For measurement of residual and true DC fields.
Magnetis is the successor of the famous MDCR and offers now a
minimum measuring step of 1 A/m ! (up to 100 A/m) and 10A/m
beyond with 3 significant digits.
Measuring range: +/- 47000 A/m, shock-mounted flexible probe.
Easier use: auto zeroing on keypad, backlighted display on demand,
measurement can freeze for a post reading. Device delivered with
transport case, metrological certificate Cofrac & recent
accredited, compliant with NF EN ISO 10012.
Available units: Oe ; mT ; A/m ; A/cm ; kA/m
Combined radiometer/luxmeter. Device with one dual probe
� UV-A according to NF EN ISO 3059 « viewing conditions »
� Visible according to CEI 60050 -845 & NF
EN ISO 3059
The screen with automatic backlighting displays at once both
values: UV-A light and visible light.
Easy to use: only one switch on/off.
Options :
• Luxometer only
• Radiometer only / UV-A Integrator
• Luminancemeter 0-3000000cd/m²
The splash-proof dual probe is equiped with a
mineral diffuser protected from splashes and
pollutions (easy to clean); Read out case and cables protected.
Spectral response curve of two sensors according to EN ISO 3059
'viewing conditions', angular response curves according to the 'cosine'.
Use range/mini resolution (on 3 significant digits) :
• UV-A : 0 to 20000 µW/cm² \ 1 µW/cm²
• visible : 0 to 6000 lux \ 0.1 lux
Power supply 9 V battery; automatic light-off. Automatic backlight from
50 lux.
Device delivered with transport case, metrological certificate
Cofrac & recent accredited, compliant with NF EN ISO 10012.
White backlight
The Baby Blue is a device specialized in
measuring the irradiance of neonatal
phototherapy equipment. Its spectral
response curve is according to DIN 5631.
Calibrated is the radiometry photometry
laboratory of Babb Co, the Baby Blue is
represented in the medical world by
� Magnetism ²
Tangential magnetic field meter MDC1n², successor of
MDC 1 and MDC1n, this device combines necessary
qualities for a trouble less use:
� Robust, accurate, versatile & simple
� Single unit display choice (A/cm, Gauss, Oe, mT)
with drop down menu.
� Measure range: + /- 333 A/cm true (470A/cm real
peak).
� Backlit
� Use range/mini resolution 10 A/m on 3 significant
digits.
� Straight or angle probe, tangential fields.
The MDC 1n² is the reference device, stable and accurate,
enduring through time. It is the best device in mechanic
and nuclear industries. Device delivered with transport
case, metrological certificate Cofrac & recent accredited,
compliant with NF EN ISO 10012.
Mini probe
Angle probe for
MDC1n²
Straight probe
for MDC1n²
Residual magnetic field indicator
graduated from 0 to ± 20 gauss or ± 20
gauss choice; provided with operation
certificate and metrological records.
Accurate ± 2G + 3% of full scale
deflection.
Weight 75g, ᴓ 63mm * 34mm,
fluorescent dial.