+ All Categories
Home > Documents > DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin...

DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin...

Date post: 23-Feb-2020
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
13
Page | 1 DocAve Antivirus 3.0 for Microsoft SharePoint 2010 User Guide Protect your Microsoft SharePoint 2010 Farm from Viruses and Malware Using DocAve Antivirus for Microsoft SharePoint This document is intended for anyone wishing to familiarize themselves with the user interface and basic functionality of DocAve Antivirus, including real-time and scan-based farm protection from malicious viruses and other malware.
Transcript
Page 1: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 1

DocAve Antivirus 3.0 for Microsoft SharePoint 2010

User Guide

Protect your Microsoft SharePoint 2010 Farm from Viruses and Malware Using DocAve Antivirus for Microsoft SharePoint

This document is intended for anyone wishing to

familiarize themselves with the user interface and

basic functionality of DocAve Antivirus, including

real-time and scan-based farm protection from

malicious viruses and other malware.

Page 2: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 2

Table of Contents

Table of Contents................................................................................................................................................... 2

Basic Overview .......................................................................................................................................................... 3

Requirements ............................................................................................................................................................ 3

Supported Platforms ............................................................................................................................................. 3

Installation ............................................................................................................................................................ 3

Installation Steps ....................................................................................................................................................... 4

Web Front-end Settings ............................................................................................................................................ 4

License Management ............................................................................................................................................ 5

Patch Management .............................................................................................................................................. 5

Basic Configuration ................................................................................................................................................ 5

Database Configuration............................................................................................................................................. 5

Creating a new database ...................................................................................................................................... 6

Connecting to an existing database ...................................................................................................................... 6

General Settings .................................................................................................................................................... 7

Quarantine Settings .................................................................................................................................................. 7

Log Settings ............................................................................................................................................................... 7

Email Profile .............................................................................................................................................................. 7

Email Settings ............................................................................................................................................................ 8

Editing the email template .................................................................................................................................... 8

Scan Engines Management ....................................................................................................................................... 9

View Trend Micro Scan Engine information .......................................................................................................... 9

Update the scan engine ........................................................................................................................................ 9

Specify a Client Proxy ............................................................................................................................................ 9

Scheduled Scan Profile ............................................................................................................................................ 10

Antivirus .............................................................................................................................................................. 11

Real-Time Scan Settings .......................................................................................................................................... 11

Scheduled Scan ....................................................................................................................................................... 11

Reports .................................................................................................................................................................... 12

Page 3: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 3

Before You Begin

Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and files as they are uploaded in to

SharePoint, as well as scanning existing content that has already been uploaded in to your SharePoint

environment for viruses. It is fully integrated in to SharePoint’s Central Admin, from where you can deploy

and manage the filters on your SharePoint web front-end (WFE) servers efficiently and easily. Access to this

tool is limited to the SharePoint Farm Administrator.

Requirements The supported platforms for DocAve Antivirus are listed below. There are no additional system

requirements beyond what is required by SharePoint. The number of scanning threads run and the amount

of content in your environment will determine the resource impact on your system.

Supported Platforms Like all DocAve products, DocAve Antivirus for Microsoft SharePoint runs in a Manager/Agent configuration.

This configuration requires that the Antivirus Manager be installed on the same WFE as the SharePoint

Central Administrator and then deploying Agents to all SharePoint web front-ends (WFE) where users are

able to create or upload content. By ensuring that the Agents have been deployed to all WFEs you can

ensure maximum protection for your farm. Your SharePoint WFEs and SharePoint Central Administration

Server must be running on:

Microsoft Office SharePoint Server 2010 orMicrosoft Office SharePoint Foundation Server 2010

Windows Server 2008 or Windows Server 2008 R2

SQL Server 2005, 2008, or 2008 R2 (32 or 64 bit as well as Standard, Enterprise, or Express for

all applicable versions)

.NET Framework v2 or higher

Installation

Page 4: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 4

The DocAve Antivirus Installation Wizard will guide you through the installation process. By following the

steps below, you will have DocAve Antivirus protecting your environment quickly and easily.

Installation Steps Begin by running the Installation Wizard on the SharePoint Central Admin server first. This will allow

you to remotely deploy the WFE agents for this software from SharePoint’s Central Admin.

Note: If you have installed any previous version of the DocAve Antivirus and Content Shield, and are now

upgrading to DocAve Antivirus for Microsoft SharePoint 3.0, please uninstall the previous version of DocAve

Antivirus and Content Shield first before installing DocAve Antivirus for Microsoft SharePoint 3.0. Additionally,

if you upgrade your environment from Microsoft SharePoint 2007 to Microsoft SharePoint 2010, you should

uninstall the previous version of DocAve Antivirus for Microsoft SharePoint before installing DocAve Antivirus

for Microsoft SharePoint 3.0. The databases used for the previous version of SharePoint cannot be applied in

DocAve Antivirus for Microsoft SharePoint 3.0.

1. Download the DocAve Antivirus for Microsoft SharePoint .ZIP file by requesting a Free Trial

from http://www.avepoint.com/download/ or by contacting an AvePoint representative for

links to this package.

2. Unzip the package on your SharePoint Central Admin Server.

3. Run the setup.exe file found in the unzipped directory.

4. Follow the steps on screen for configuring this tool. You will be asked for your name, company

information, and for the directory where you wish to install this software.

5. After installing the tool, you will be prompted to restart IIS* in order to complete the installation.

You can choose to reset IIS later by selecting No.

*Note: The IIS reset does not immediately restart the IIS service, but performs a “no-force” reset

of the IIS processes. Any processes currently running will be allowed to finish before this reset

takes place. If you choose to reset IIS at a later time, the installation will not be completed until it

is reset.

Congratulations! DocAve Antivirus for Microsoft SharePoint is now installed on your Central Admin Server.

Web Front-end Settings In order to protect your SharePoint environment, you must next configure DocAve Antivirus for Microsoft

SharePoint on each SharePoint web front-end server (WFE) in your environment. The WFE will execute both

the scheduled scans and real-time scan of your environment, based on the configuration set in the Central

Administration WFE Manager.

1. Navigate to Central Administration > DocAve Antivirus for Microsoft SharePoint > Front-end Settings.

This will list the available front-end servers in the Front-end Server list.

2. Select the front-end server you want to deploy DocAve Antivirus for Microsoft SharePoint from the

Front-end Server List by clicking the checkbox, and then click Deploy Now. You can also click the

server name to select Deploy Now.

*Note: For remote installations in certain environments, if the deploy status continues to be Deploying after

several minutes, you may encounter a warning stating Please ensure the Windows SharePoint Timer Services

Page 5: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 5

are in the running status. Please access the Event Viewer for that respective WFE,, and restart the service if

necessary.

License Management After installation, you must next apply the Antivirus license file for your Front-end servers. You can obtain

this license from your AvePoint sales representative. To assign a license to the Front-end server, please follow

the steps below:

1. Navigate to Central Administration > DocAve Antivirus for Microsoft SharePoint > Front-end

Settings.

2. Under the License Management section, click the Browse button and select the license you wish

to apply for the central administration.

3. Click the Apply button, this will display detailed information about the license.

4. Select the web front-end servers you want to assign the license to from the Front-End Server List

by selecting the appropriate checkbox and then clicking Apply License. You can also click the

server name to select Apply License.

5. After assigning a license to a front-end server, the license status of the server will change to

Applied.

Patch Management DocAve Antivirus for Microsoft SharePoint Patch Management allows you to update the current version of

DocAve Antivirus for Microsoft SharePoint from within the program.

1. Navigate to Central Administration > DocAve Antivirus for Microsoft SharePoint > Front-end

Settings.

2. Select the sever you want to apply a patch from the Front-End Server List by clicking the

checkbox, and then click Apply Patch.

3. In the pop-up window, click the Browse button to select the patch you want to load.

4. Click the Apply button. After applying a patch to a front-end server, the version status of the

server will be changed.

*Note: When upgrading, you must upgrade the Central Administration WFE first, followed by the remaining

WFE’s in your environment.

Basic Configuration

Database Configuration The DocAve Antivirus for Microsoft SharePoint installation requires an application database to store its

settings and configuration. You can deploy this application database to the same SQL server instance as

SharePoint or to another SQL instance connected to your network.

Page 6: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 6

Creating a new database To create a new database for the DocAve Antivirus for Microsoft SharePoint, follow the steps below.

1. Navigate to the Central Administration. On the Quick Launch, you will see the AvePoint Tools

and Services field. Click the DocAve Antivirus for Microsoft SharePoint option.

2. If you did not specify a database for the application during installation, an interface will pop-up

and prompt you to do so.

3. On the Quick Launch, click Application Database.

4. Select the Create a new database option from the Application Database Type category.

5. Enter the database server name into the Database Server text box, and then the database name

for the new database you want to create for DocAve Antivirus.

6. Select an authentication type by checking the corresponding check-box. If you select the SQL

Server Authentication option, you will need to enter the necessary information in the SQL

Account and Password fields.

7. Click the Create button to create the new database for the application.

Connecting to an existing database To connect an existing database to use as the DocAve Antivirus for Microsoft SharePoint application database,

follow the steps below:

1. Navigate to the Central Administration. On the Quick Launch, you will see the AvePoint Tools

and Services field. Click the DocAve Antivirus for Microsoft SharePoint option.

2. If you did not specify a database for the application during installation, an interface will pop-up

prompting you to do so.

3. On the Quick Launch, click Application Database.

4. Select the Connect to an existing database option from the Application Database Type.

5. Enter the database server name into the Database Server text box, and then the database name

you want to connect for DocAve Antivirus.

6. Select an authentication type by checking the corresponding check-box. If you select the SQL

Server Authentication option, you will need to enter the necessary information in the SQL

Account and Password fields.

7. Click the Connect button. This will connect the database to the application.

*Note: In order to protect your environment, it is recommended to create a new database by DocAve Antivirus

for Microsoft SharePoint or connect to an existing database which created by another DocAve Antivirus for

Microsoft SharePoint WFE installation.

Page 7: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 7

General Settings

This section details several important settings to configure for DocAve Antivirus for Microsoft SharePoint after

installation.

Quarantine Settings The DocAve Antivirus for Microsoft SharePoint application allows you to either immediately delete offending

data or store offending data in a quarantined location in your environment, preventing access to the offending

content from SharePoint without removing it. Access to this location should be restricted as the contents of

the quarantined location may be infected or harmful. Using these settings, you can specify the location,

maximum space, time period to keep the files, the email notification and quarantine clearing options.

1. Navigate to the Central Administration. On the Quick Launch, you will see the AvePoint Tools

and Services field. Click the DocAve Antivirus for Microsoft SharePoint option.

2. On the Quick Launch, click Quarantine Settings.

3. Enter a location for the quarantine into the Quarantine Path area. If the path you specify is a

network path, you must specify a user account with access to that location.

4. Set the maximum space for the quarantine, and then specify the time period to keep files in the

quarantine. By default, the time period for the files in the quarantine is 30 days.

5. You may optionally select the Warning Notification option. When selected, the program will send

a notification email once the capacity of the quarantine location is less than 10% of the available

quarantine space.

6. In Auto Clean Quarantine field, you may wish to select Clean up quarantine automatically, the

quarantined file will be automatically deleted when the file size exceeds 90 percent of the

limitation. And the quarantined file size will be checked every 10 minutes. If Time Period option

and Clean up quarantine automatically option are selected together, it will clean up the files

accordingly when the condition meets at least one requirement.

7. Click the Save button to save the configration. You can go to View Quarantine to view the files

in the quarantine.

Log Settings Log Settings allows you to configure the log level for each feature and specify the maximum storage time for

the log report. After configuring these settings, click the Save button to save the settings or the Reset button

to clear the configuration.

*Note: If you are experiencing any issues with this product, we ask that you set all log-levels to Debug

before contacting AvePoint technical support.

Email Profile This section allows you to create various email profiles to distribute relevant information to different mailing

lists, which can then be selected to receive emails after certain events. To set up an email notification profile,

follow the steps below:

Page 8: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 8

1. Navigate to the Central Administration. On the Quick Launch, you will see the AvePoint Tools

and Services field. Click the DocAve Antivirus for Microsoft SharePoint option.

2. On the Quick Launch, click Email Profile, then you can view any previously created email

profiles on Email Profile List page.

3. Click New Profile to create a new profile

4. Enter a profile name into the provided field.

5. Enter your Outgoing Mail Server (SMTP) and specify the corresponding port for it. The default

smtpport number for most environments is 25.

6. If you have configured any authentication requirements for your mail server, you must configure

the Email Server Authentication to comply with those requirements..

7. In the Sender field, enter the email address you would like the notifications to come from.

8. Enter the recipients you would like to include in this profile under the Recipients field. Multiple

recipients can be added to the recipient text box by entering each new recipient on their own

line.

9. You can click the Test button to test the configuration. If the test is successful, the recipient(s)

you have specified for this profile will receive a test email message.

10. Click the Save button to save the configuration, it will now be listed under Email Profiles and can

be selected to receive notifications from the DocAve Antivirus.

*Note: Please ensure that the account used to send emails is not in the profile’s recipients list. This will

cause an error in the messaging system.

Email Settings This section is used to further customize the notifications which the recipients of an email profile will receive.

Begin by selecting the desired email profile by selecting the profile from the drop-down box for each module,

you can then edit the mail template for each module.

Editing the email template 1. Navigate to the Central Administration. On the Quick Launch, you will see the AvePoint Tools

and Services field. Click the DocAve Antivirus for Microsoft SharePoint option.

2. On the Quick Launch, click Email Settings.

3. Click the Edit Mail Template for the module you want to edit.

4. Select the keywords you want to add to the subject from the first Value Keywords drop-down box,

and then click the Add button, the keywords will be added into the subject.

5. Select the keywords you want to add to the message body from the second Value Keywords

drop-down box, and then click the Add button, the keywords will be added into the main body.

6. You can then enter any additional content you want sent in the email template.

Page 9: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 9

7. Click the OK button to save the configuration for specific feature; or the Cancel button to cancel

the settings.

Scan Engines Management Scan Engines Management allows you to view information about the Trend Micro Scan Engine, update the

scan engine, and clear the collected statistics.

View Trend Micro Scan Engine information If you want to view information about the Trend Micro Scan Engine, follow the steps below.

1. On Front-end Server List page, select the check-box of Front-end Server which you want to view

information.

2. Click Show, you will see the details about Scan Engine Response Data and Scan Engine Statistic

Data. You can also click the server name to select Show.

Update the scan engine By default, the scan engine does not check for scan engine updates on a schedule automatically. If you want to

update the scan engine by schedule, you can set up the schedule by going to the Virus Signature Database

Version > Update tab, and then selecting the check-box next to Schedule. Each WFE must be able to access the

Internet in order to update the scan engine.

1. On Front-end Server List page, select the check-box of Front-end Server which you want to

change update schedule.

2. Click Schedule, then a Virus Signature Database Update Schedule dialog box will pop up. You can

also click the server name to select Schedule.

3. After the setup, it will be displayed under Update Schedule column on Front-end Server List page.

4. You can change it by clicking Update Now to do the update immediately. You can also click the

server name to select Update Now.

5. You can also cancel the update schedule of a front-end server by selecting the front-end server

and clicking Reset on the ribbon. You can also click the server name to select Reset.

Specify a Client Proxy If your WFEs do not have internet access and you wish to configure a proxy server you may do the steps

below. Here you can specify a Client Proxy to update the scan engine for any WFEs that cannot access the

Internet.

1. Click Settings, then a Proxy Settings dialog box will pop up.

2. Check the User HTTP proxy server check box.

3. Enter the IP address or the machine name of the server which you want to utilize as a proxy to

update the scan engine. Please ensure this machine can access the Internet.

4. Specify a TCP/IP port for the Scan Engine. By default, the port number is 80.

5. Enter a username and password with the appropriate level of access to this machine.

Page 10: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 10

6. Click OK to save the configuration, all WFEs will update the scan engine through this specified

machine.

*Note: Please make sure you can connect to the machine from the Central Admin Server and all other WFEs.

Scheduled Scan Profile These profiles allow you to configure the basic settings for scheduled scan jobs; you can click New Profile to

create a new profile.

Profile Name: Enter a profile name for the scheduled scan profile into the provided field.

Number of Threads: This will start several threads while scanning for a virus. The scans will be

faster and more efficient if you specify a higher thread number, however, this will require more

system resources.

Scan File Versions: Scan all versions of the files in SharePoint if you select this option, since each

SharePoint version is a unique object, it is recommended that all versions are scanned.

Virus Scan Action: Allow you to configure what happens to infected files for different file rules

during a scheduled scan job.

Basic Virus Rule: The operation specified in this field is used for the files infected with

common repairable viruses. There are four actions you can select: Clean, Delete, Quarantine,

and Report only.

Clean: Clean the infected documents by deleting the infected parts of the file.

Delete: The content of the infected file will be replaced by detailed information of

the job which deleted it.

Quarantine: A .dat file and a .xml file of the infected file will be created in the

quarantine.

Report only: Generate a report for each infected file. You can navigate to Central

Administration > DocAve Antivirus for Microsoft SharePoint > Reports > Scheduled

Scan Job Report and click on the corresponding scheduled scan job to view the

reports.

Un-repairable Virus Rule: The operation specified in this field is used for the files infected

with the un-repairable viruses. There are three actions you can select: Delete, Quarantine,

and Report only.

Delete: Contents of the infected file will be replaced by a detailed report of the job

that deleted it.

Quarantine: A .dat file and a .xml file of the infected file will be created in the

quarantine location.

Report only: Generate a report for each infected file. You can navigate to Central

Administration > DocAve Antivirus for Microsoft SharePoint > Reports > Scheduled

Scan Reports and click on the corresponding scheduled scan job to view the reports.

Page 11: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 11

Customize Delete and Quarantine Information: Allows you to configure what information will

appear to the users when the item is deleted or quarantined.

Click the Save button to save the configuration, and then the profile will be listed on the Schedule Scan Profile

List page.

Antivirus

After configuring the basic settings above, you may now configure the settings to scan files for viruses in

SharePoint. DocAve Antivirus for Microsoft SharePoint allows you create rules for the scan engine which it will

use to scan the content in SharePoint accordingly.

Real-Time Scan Settings

After configuring the initial settings, DocAve Antivirus will perform a real-time scan of the files in the

SharePoint farm with this product deployed. There are several options you can configure for real-time

scanning:

Antivirus Settings: Specify when you want the files to be virus scanned, whether users are allowed

to download infected documents, and whether you want your virus scanner to clean infected files.

Please note that only when Scan documents on upload or Scan documents on download is checked

will the settings for a real-time scan will work.

Antivirus Time Out: Enter a number into the Time out duration box. If the time waiting for a server

response is longer than the time you specify, it will be considered as a time out.

Antivirus Threads: Enter the number of threads you wish to use when scanning into the Number of

threads text box. The more threads you allow the tool to create the faster and more efficient the

scanning will be, however, this will require more system resources.

Click the Save button to save the configuration.

Scheduled Scan Scheduled Scan allows you set up a plan to scan the content in specific site at a specified time. To set up a plan,

follow the steps below:

1. Navigate to the Central Administration. On the Quick Launch, you will see the AvePoint Tools

and Services field. Click the DocAve Antivirus for Microsoft SharePoint option.

2. On the Quick Launch, click Scheduled Scan.

3. Click New Plan to create a new plan. A Plan Details dialog box will pop up. Enter a plan name

into the provided field.

4. Clicking on the name of the farm will expand the tree further to display any sub-items.

5. Select the content you want to scan by checking the corresponding check-boxes.

6. You can set the scan job to run on a schedule by checking the Enable Full Schedule or Enable

Incremental Schedule check-box.

Page 12: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 12

7. Using the calendar icon next to the Start Time field, select a date for the scan job to run, and then

select the time from the corresponding drop-down box.

8. Set an interval for recurring rules based on Only Once, by Minute, by Hour, by Day, by Week, or

by Month.

9. There are two scan types: Full and Incremental.

Full: This will scan all content in the specific location.

Incremental: This option scans only the changes from the previous scan job in the

specific location (including creating / updating the items).

*Note: If no full filter has been performed previously, the incremental option will perform a

full scan job by default. Although incremental scans improve performance, a full scan is

recommended whenever your Trend Micro Scan Engine receives a new virus definition

update.

10. You may enter a Description in the field provided to help distinguish this job in the report.

11. Select a scheduled scan profile from the drop-down box. It is a mandatory option.

12. Select an email profile from the drop-down box; this contains the list of profiles that you created

earlier in the Email Profile section. This feature is optional.

Reports After scanning the content, DocAve Antivirus will generate a report for the job. There are two kinds of

reports: Real-Time Reports and Scheduled Scan Reports.

On Quick Launch, select Real-Time Report beside Report Type. For the Real-Time Reports, all the infected

files will be listed in the report list. You can view more detailed information of the infected files in the list.

On Quick Launch, select Scheduled Scan Job Report beside Report Type. For the Reports generated by

schedule scanning jobs, all scheduled scanning jobs will be listed in it. You can view more detailed

information and the job status for the scanning plan. By clicking the job name, and then clicking Show Job

Reports, you can view the detailed information of the infected files found in the job.

Name: the name of the infected file.

Status: the current status of the file.

Result: the operation result of the file.

Virus: the virus ID, violation name and virus count.

Scan Time: the time of the scan time.

User: the owner of the file.

Size: the size of the infected file.

URL: the URL of the file.

Page 13: DocAve Antivirus 3.0 for Microsoft SharePoint 2010 · 2017-05-01 · Page | 3 Before You Begin Basic Overview DocAve Antivirus for Microsoft SharePoint scans SharePoint content and

Page | 13

Copyright

2010 AvePoint, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of AvePoint, 3 Second Street, Jersey City, NJ 07311, USA Trademarks AvePoint DocAve® , AvePoint logo, and AvePoint, Inc. are trademarks of AvePoint, Inc. Microsoft, MS-DOS, Internet Explorer, Microsoft Office SharePoint Servers 2007, SharePoint Portal Server 2003, Windows SharePoint Services, Windows SQL server, and Windows are either registered trademarks or trademarks of Microsoft Corporation. Adobe Acrobat and Acrobat Reader are trademarks of Adobe Systems, Inc. All other trademarks are property of their respective owners. Changes The material in this document is for information only and is subject to change without notice. While reasonable efforts

have been made in the preparation of this document to assure its accuracy, AvePoint makes no representation or

warranty, expressed or implied, as to its completeness, accuracy, or suitability, and assumes no liability resulting from

errors or omissions in this document or from the use of the information contained herein. AvePoint reserves the right to

make changes in the product design without reservation and without notification to its users.

AvePoint 3 Second Street Jersey City, NJ 07311 USA

20101029.084315


Recommended