(1 – teeth, 2 – green fluorescent protein in jelly fish, 3- fluorescent highlighter pens, 4 - £20 note under UV light, 5- fluorescent SmartWater used to prevent theft . All images show items that fluoresce under UV light)Fluorescence Sensing
Fluorescence (sometimes called photoluminescence)
CHEMISTRY and LIGHT
The emission of light from a chemical, when it is irradiated with light of a different energy:
Substance ABSORBS energy from LIGHT – ‘excited’
Energy is released as LIGHT emission = fluorescence
Practical Experiment:
AIM: To make a selection of fluorescent solutions, and a molecular fluorescence pH sensor
ATTENTION: wear safety goggles – we are going to use ethanol
You will need:BeakerFilter paperFunnelConical flasksSpatulaEthanolWater1 M HCl solution1 M NaOH solution
ACTIVITY
We are going to extract fluorescent molecules from some common items that you may come across at home:
Equipment for the extraction
DISSOLVE the fluorescent compound in a SOLVENT, in a beaker, to form a SOLUTION.
FITLER this solution to remove the RESIDUE, and collect the FILTRATE:
residue
filter paper
filter funnel
conical flask
filtrate
Make up a fluorescent solution of vitamin B2 and another solution of your choice:
1. Make up a fluorescent solution of riboflavin (vitamin B2):- Empty a capsule of vitamin B2 into a beaker, with and dissolve it in 50 mL of
water, and stir- Pour the mixture into a filter funnel, and collect the liquid in the funnel at the
bottom- Use a pipette to collect some of this liquid into a sample vial, put the lid on it,
and look at this under the UV lightWhat light is it absorbing?What type of light is it emitting?
2. Make up a fluorescent solution of optical brightener:- Take a teaspoon of washing powder, and dissolve it in 50 mL of water- Pour the mixture into a filter funnel, and collect the liquid in the funnel at the
bottom- Use a pipette to collect some of this liquid into a sample vial, put the lid on it,
and look at this under the UV lightWhat light is it absorbing?What type of light is it emitting?
2. Or Make up a fluorescent solution of chlorophyll:- Take a handful of spinach leaves, put into sample bag- Add 25 mL of ethanol- Scrunch the leaves in the bag and in the ethanol for a few minutes- Pour the mixture into a filter funnel, and collect the green liquid in the funnel at
the bottom- Use a pipette to collect some of this liquid into a sample vial, put the lid on it,
and look at this under the UV lightWhat light is it absorbing?What type of light is it emitting?
2. Or Make up a fluorescent solution of curcumin:- Take a teaspoon of turmeric, and dissolve it in 50 mL of ethanol- Pour the mixture into a filter funnel, and collect the liquid in the funnel at the
bottom- Use a pipette to collect some of this liquid into a sample vial, put the lid on it,
and look at this under the UV lightWhat light is it absorbing?What type of light is it emitting?
3. Sensing acidity and basicity:
Take some of your riboflavin (vitamin B2) solution in a plastic vial. Look at the fluorescence under a UV lamp – now change the pH of the solution by adding a few drops of 1M NaOH(aq) solution – compare the fluorescence
You can neutralise the solution with HCl (aq) solution, and then take the solution down to low pH – compare the fluorescence again.
Water is ____neutral______ and has a pH of ______ 7________
Riboflavin (vitamin B2) is ____ highly_____ fluorescent in water
NaOH (aq) is ____ basic______ and has a _____ high_____ pH
Riboflavin (vitamin B2) is ______ not_____ fluorescent when NaOH(aq) is added
How can this be reversed, after you have added NaOH(aq)?
Add HCl (aq) solution to neutralise, bringing the pH back down to 7
The acidity/basicity of a solution can be SENSED with riboflavin (vitmin B2), and we can see whether the solution is neutral or basic by how BRIGHTLY the molecule fluoresces.