DOCUMENT PACKWH-L4 Lever Hoist
Oak Drive, Lionheart Enterprise Park, Alnwick, Northumberland NE66 2EU
Tel: +44 (0) 1665 60420 Email: [email protected] Website: www.williamhackett.co.uk
William Hackett Lifting Products
williamhackett.co.uk
Index
- William Hackett L4 Chain Hoist Specification June 2020
- Specification and Manufacturing Document L4 Chain Hoist
- DNV GL Verification Statement No: N141UH09
- FEC9 7.1mm x 21mm Gr8 Calibrated Load Chain
- WHLP L4 Chain Hoist 1.6t x 1.5m Works Order
- EC Declaration of Conformity
williamhackett.co.uk 3e: [email protected]: 01665 604200 f: 01665 604204
WH-L4LEVER HOIST
The Hackett WH-L4 lever hoist meets and exceeds the requirements of the following international standards:British and European Standard BS EN13157:2004 + AI:2009American Standard ASME B30.21-2014Australian Standard AS1418.2-1997NORSOK R-002: 2017SANS 1636: 2007
williamhackett.co.uk 5e: [email protected]: 01665 604200 f: 01665 604204
WH-L4 Lever Hoist Design Features
The design and specification of the William Hackett WH-L4
lever hoist includes:
• WORKING LOAD LIMIT RANGE: 800 Kg to 20 tonnes.
• LIGHT LOAD CAPABILITY: the WH-L4 is tested and certified
at 2% of the lever hoist rated capacity.
• TWIN PAWL: double safety; fitted as standard.
• SAFETY FACTOR: 4:1
• SAFETY LATCHES: the WH-L4 lever hoist top and bottom
hooks are fitted with heavy duty cast steel latches. The latch
and hook tips are integrated creating a strong and robust
hook closure.
• OVERLOAD INDICATOR MARKS: the WH-L4 lever hoist
top and bottom hooks have, as part of the hook forging,
overload indicator marks either side of the hook throat
(800 Kg to 6.3 tonne).
• TOP AND BOTTOM HOOKS: stamped with batch code,
manufacturer’s mark and hoist working load limit for full
traceability and compliance to EN1677 and SANS 1636: 2007
• HOOK HOUSING: the WH-L4 lever hoist top and bottom
hook housings are secured with socket head cap screws/hex
head bolts and nyloc locking nuts to allow full inspection.
• FLEETING/CROSS HAULING: the WH-L4 lever hoist has
been independently tested and verified (Test Report 2550-
7615) for fleeting or cross hauling applications at angles up to
45° from the vertical without deration.
• LOAD CHAIN: the WH-L4 lever hoists are fitted with load
chain that fully complies with international standard BS
EN818-7 Grade T (8).
• TEMPERATURE RANGE: -20°C to +120°C.
• PROOF TESTED: every hoist is proof tested to 1.5 times the
Working Load Limit.
• OPTIONAL EQUIPMENT:
- Overload Limiter
- Top and bottom hook adaptors
- Travelling End Stop
• MANUFACTURED in the UK.
Part Code Part Name
L4.01 Left Side Plate Assembly
L4.02 Load Sheave
L4.03 Chain Guide
L4.04 Top Hook Shaft
L4.05 Top Hook Assembly
L4.06 Right Side Plate Assembly
L4.07 Load Gear
L4.08 Pinion Shaft
L4.08a Pinion Shaft Washer
L4.09 Pinion Gear (pair)
L4.10 Gear Cover
Part Code Part Name
L4.11 Nut
L4.12 Chain Stripper
L4.13 Disc Hub
L4.14 Pawl Spring
L4.15 Pawl
L4.15a Circlip
L4.17 Friction Disc (pair)
L4.18 Ratchet Gear
L4.20 Spring
L4.21 Lock Nut
Part Code Part Name
L4.22 Handle Cover Assembly
L4.23 Change Gear
L4.23L Overload Limiter
L4.24 Change Over Pawl
L4.25 Change Over Spring
L4.26 Change Over Stand
L4.28 Lever Handle Assembly
L4.29 Screw
L4.29A Spring Washer
L4.30 Grip Ring
Part Code Part Name
L4.31 Stop Cam
L4.32 Washer
L4.33 Castle Nut
L4.34 Split Pin
L4.36 Square Type End Stop
L4.37 Bottom Hook Assembly
L4.38 Chain Fixing Pin
L4.47 Latch Kit
L4.48 Label
L4.49 Label Rivets
WH-L4 Chain Hoist
williamhackett.co.uk 7e: [email protected]: 01665 604200 f: 01665 604204
Specifications and Dimensions
Part Code
WLLtonnes
No. of Falls
Load Chainmm
amm
bmm
cmm
dmm
emm
hmm
imm
MassKg
1.5mHOL
Extra Weightper m
Kg
033.080 0.8 1 5.6 x 17 148.0 121 37.5 265 28 280 14.3 6.2 0.7
033.160 1.6 1 7.1 x 21 165.5 141 47.0 415 33 350 20.0 9.6 1.1
033.320 3.2 1 10 x 30 194.5 178 62.5 415 42.5 420 24.8 15.5 2.2
033.630 6.3 2 10 x 30 194.5 228 78.0 415 51 570 33.8 27.0 4.4
033.900 9.0 3 10 x 30 194.5 310 - 415 56 680 42.2 38.3 6.6
033/1500 15.0 6 10 x 30 194.5 420 - 415 80 1000 59.2 90.0 13.2
033/2000 20.0 8 10 x 30 194.5 480 - 415 80 1150 - 195.0 19.2
Single Fall
a a
Multi Fall
ab b
c
d
d
e
hh
e
i i
Documentation
williamhackett.co.uk
Part Code WLLt
Proof Load Appliedt
033.080 0.8 1.20
033.160 1.6 2.40
033.320 3.2 4.80
033.630 6.3 9.45
033.90 9.0 13.50
033/1500 15.0 18.75
033/2000 20.0 25.00
Specification and Manufacturing Standards DocumentDate:
Ref. No.:
International Standards & VerificationStandards Classification: EN13157:2004+A1:2009 NORSOK R-002 ASME B30.21-2014DNV GL Verification: DNV GL Statement No: N141UH09Gr8 Calibrated Load Chain: EN818-7 - Part 7: Fine tolerance hoist chain, Grade T
Technical Specification
Each individual William Hackett C4 Lever Hoist is individually tested before being supplied to the customer
WH-C4 Manual Chain Hoist
Standard Classification ✔
ATEX Classification
Corrosion Protected Classification
Documentation
williamhackett.co.uk 9e: [email protected]: 01665 604200 f: 01665 604204
Product Part Code Series Material Surface Finish
Manual Hoist Load Chain AT2 Grade 8 Zinc Plated
AT3 Grade 8 Delta Protekt
SS6 Grade 6 Stainless Steel
Manual Hoist Hand Chain CT6.050.25 Mild Steel Zinc Plated
CT6.050.25.C Mild Steel Dacromet
CT6.050.25.SS AISI316 Stainless Steel
Coating Specification
Standard Hoisting Category C2 ISO12944
ATEX Hoisting Category C3 ISO12944
Corrosion / Offshore Category C3 ISO12944
Salt Spray Testing
Standard Hoisting C4 ISO9227:2017, ASTM B117
≥ 200hrs
Corrosion / Offshore ATEX, SS-C4, CP-C4 ≥ 500hrs
Product Part Code Series Material Surface Finish
Manual Hoist Load Chain AT2 Grade 8 Zinc Plated
AT3 Grade 8 Delta Protekt KL105
SS6 Grade 6 Stainless Steel
Coating Specification
Standard Hoisting Category C2 ISO12944 ✔
ATEX Hoisting Category C3 ISO12944
Corrosion / Offshore Category C3 ISO12944
Salt Spray Testing
Standard Hoisting L4 ISO9227:2017,
ASTM B117
≥ 200 hours
Corrosion / Offshore ATEX, SS-L5 QP, SS-L5 IM ≥ 500 hours
williamhackett.co.uk 11e: [email protected]: 01665 604200 f: 01665 604204
1 1 FEC CHAIN CORPORATION
337 KANAORl-CHO,MlNAMl-KU,HAMAMATSU ClTY,SHlZUOKA PRE., 435-0026 JAPAN
Tel +81-53-425-2145 Fax +81-53-425-5122
customer's name:
William Hackett Chain Ltd. Address
Oak Drive,
Lionheart Enterprise Park, Alnwick ,
Northumberland, NE66 2EU UK
Inspection Certificate description:
quality grade:
material:
chain7.1 X 21
FEC FTE/G80• Type-T
issued date:
cert. No. : customer order no.
FEC invoice no.
quant. desp. :
weight:
manufactured date:
lot no. :
24.10.2019
19-019601508
WHC045200m*1pc
216kg
25.09.2019
BT
condition of surface:
working load limit:
ultimate limit of stress:
according to EN818-7:2002
Ni-Cr-Mo steel
zinc-plated, no oiled
1600kg (hand mechanism group 1 Dm)
300N/mm (hand mechanism group 1Dm)
Guaranteed properties: min. manufacturing proof force:
stress at min. manufacturing proof force:
guaranteed minimum breaking force:
stress at guaranteed min. breaking force:
total ultimate elongation min. :
stamp:
Dimension: nominal diameter dn 7 .1 +0.3/-0.3
nominal pitch p 1t 21.0 +0.27/-0.13
p 11t 231.0 +0. 73/-0.37
outside width b2 max 23.8
inside width b1 min 8.4
diameter at the weld ds max 7.7
Manufacturer' s declaration:
We hereby declare that the chain
comply with EN standard /EN818-7: 2002 .
mm
mm
mm
mm
mm
mm
39.6 kN
500 N/mm 2
63.3 kN
800 N/mm 2
10 %
H36·T ,JAPAN ,(lot no.) ,FEC9
MASAKI MIWA Chief Inspector
Product Description Unit Qty Batch Lot Bin Picked
033.160.C 1.6T HACKETT LEVER HOIST CARCASS L4 EACH 1 Q61491 911010887+ Z306AT2.071.5 7.1MM x 21MM GRADE 80 LOAD CHAIN GALV MT 1.5 Q61402 FEC9 200M US105
Works Order No: 647132 Date Required: 25/05/2020
Instructions:SAMPLE
L077931Finished Item Bin: QA1
Finished Item Batch: P06064
Finished Item Lot No: 911010887+
Final Inspection Completed by:
Printed:
Date:
Product Code: HN 033.160
Product Description: 1.6TON HACKETT LEVER HOIST 1.5 MT HOL L4
Qty: 1
Pick List: 678351
Customer: 1BB
1600KGLH PROOF + LIGHT LOAD TEST TO EN13157 1
Technical Notes:1.6 TONNE
2.4 TONNE
Page 1 of 1 15/06/2020 12:56Date Printed
Delivery Address Supplied To: ABC123 Certificate Number: L078545
Customer Order No: 9155185
Date Received: 08/06/2020
PRODUCTS REQUIRING A DECLARATION OF CONFORMITY
ARE INDICATED BY (A)
WILLIAM HACKETT LIFTING PRODUCTS LIMITED
LIONHEART ENTERPRISE PARK
OAK DRIVE
ALNWICK
NORTHUMBERLAND, NE66 2EU THOSE REQUIRING JUST A MANUFACTURER'S
CERTIFICATE BY (B)
DUAL PURPOSE DOCUMENT EC DECLARATION OF
CONFORMITY A
DECLARATIONI DECLARE THAT THE ITEMS DESCRIBED ON THIS DOCUMENT COMPLY WITH THE
REQUIREMENTS OF THE MACHINERY DIRECTIVE 2006/42/EC
MANUFACTURER'S CERTIFICATE B
CERTIFIED ON BEHALF OF THE COMPANY
T.J. BURGESS 08/06/2020
Authorised person for the configuration of the declaration documents: Tim Burgess, William Hackett Lifting Products, Alnwick, UK
A/B Batch Lot No / Serial No Product Description Qty Working Load
Limit Proof Load Min Breaking Load
A P06475 001181652L HN033.160 1.6TON HACKETT LEVER HOIST 1.5 MT HOL L4 to EN13157 1 1.6 TONNE 2.4 TONNE
Page 1 of 1
Report Version 2-6
WH12 Issue 1