Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

DONALDSON TRADE AUTOMATION

SUPPLIER INSTRUCTIONS

I. INTRODUCTION Donaldson Company, Inc (Donaldson) uses a web-based system called Trade Automation to manage our Free Trade Agreement programs. Campaigns are created to request Free Trade Agreement information from suppliers for parts that have been purchased by Donaldson. Campaigns through Trade Automation provide a means to automate the Free Trade Agreement communication with suppliers.

NAFTA Certificates of Origin are used to substantiate NAFTA claims and reduce duty when importing into Canada, US, or Mexico. Supplier responses allow Donaldson to respond to our Customers’ Free Trade Agreement requests. Donaldson expects ALL suppliers to provide updated Certificates of Origin for products purchased from your company. Even if your product is made in the US, the requirement is that you fill out a NAFTA Certificate of Origin. If for some exceptional reason a supplier is not able to complete the NAFTA requirement, please contact Free Trade Compliance to discuss COO Manufacturer’s Affidavit options.

Why do I need to complete a NAFTA when USMCA (United States, Mexico and Canada Agreement) has been announced? While the USMCA has been announced, NAFTA is still the trade agreement in force. USMCA has yet to be put into effect; no date has been announced, but we appreciate your efforts in helping us comply with another NAFTA season.

II. RESOURCES Familiarize yourself with the Trade Automation website and NAFTA rules of origin. Below are links to key sites. It is important that you demonstrate reasonable care in the preparation of these documents. If you require additional help, we suggest you seek the assistance of a customs consultant, customs attorney, or a licensed customs broker.

U.S. Bureau of Customs and Border Protection (CBP) http://www.cbp.gov/trade/free-trade-agreements

Informed Compliance Publications http://www.cbp.gov/trade/rulings/informed-compliance-publications

Detailed NAFTA Certificate OF Origin Instructions http://www.cbp.gov/trade/nafta http://www.trade.gov/cs/

Resources concerning Harmonized Tariff Schedule (HTSUS) http://www.usitc.gov/tata/hts/bychapter/index.htm

Donaldson Global Trade Compliance, Contact Free Trade freetrade@donaldson.com , 800-365-1331, or 952-887-3131

http://www.donaldson.com/en/supplier/compliance/index.html

P a g e | 1 U p d a t e d – 10/16/2018

P a g e | 2 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

III. TRADE AUTOMATION LOG IN

1. Donaldson will send a ‘Welcome Email’ to the supplier. The Welcome email contains the supplier’s User Name and Password for Trade Automation system access.

2. Donaldson will send a NAFTA request email to the supplier. The NAFTA Request email directs the supplier

to complete a NAFTA Certificate of Origin through Trade Automation. The NAFTA request email will contain the web link to the system.

3. Click on the Trade Automation link in the NAFTA Request email. The Login screen will display.

4. Use Internet Explorer (version 8 or 9 works best). If you use Internet Explorer version 10, see compatibility instructions under 4 a. and 4 b below. Do not use other browsers such as Mozilla Firefox or Google Chrome.

a.

b. In Internet Explorer, press the Alt key to display the Menu bar, or press and hold the address bar and

select Menu bar. Click Tools and select Compatibility View.

5. Login: Enter in your User Name.

6. Password: Enter/type in your Password. Tip: It is recommended that you type your User Name and Password exactly, as some letters look like numbers and some numbers look like letters. Ensure no extra spaces are entered. Do not copy and paste, as this creates HTML text errors.

P a g e | 3 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

7. Click Login.

8. The dashboard will appear showing your Pending Responses. If you are unable to view pending responses on your dashboard, review item 4 above, to ensure you are using a compatible browser.

Tip: The system may Time-Out after 1 hour of inactivity, or perceived inactivity by the system. It is recommended that you click the Save/Submit button often to avoid loss of data.

IV. COMPLETE THE NAFTA REQUEST

The supplier dashboard shows all pending campaign requests sent by Donaldson that require your attention/response.

You must choose one of the below options for entering your NAFTA data in the tool:

• Option A: Direct Entry – recommended use is for 30 or less parts (Page 3 - 9)

• Option B: Excel Download and Upload – recommended use is for over 30 parts (Page 10 - 16)

P a g e | 4 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

Option A: Direct Entry This option allows the supplier to enter requested information directly into the Trade Automation site.

1. From the supplier dashboard, click the hyperlink of the Campaign Name you are responding to.

2. Reference the Campaign Response header section at top of page.

3. Producer Info field: Click on the dropdown and select to the appropriate option. This populates the

producer field on the NAFTA Certificate of Origin.

4. Cert Effective Date field: Default choice is the current blanket year. To change the date, click on and

select the date.

5. Cert Expiration Date field: Default choice is the current blanket year. To change the date, click on

and select the date.

6. Under Campaign Details at the bottom left of the page, reference the Response tab section.

7. Click the Part ID row to highlight and complete the information for each Part.

P a g e | 5 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

8. Fill in the NAFTA details on the right side of the page for the highlighted Part ID.

9. Qualified Flag field: Choice Select Yes or No. • Select Yes if the part qualifies for NAFTA. • If the part is not NAFTA eligible, or you do not know if the part qualifies and will be unable to make

that determination, select No.

10. Response HTS (Harmonized Tariff Schedule):

Copy and paste the Request HS

a. If Request HTS above is filled in, AND you agree with the HTS: • Copy and paste the Request HS into the Response HS box.

b. If Request HS is not filled in above or you disagree with the HS provided by Donaldson:

• Ensure Use Request HS box is not checked • Type in a 6-digit HTS number in the Response HTS box (do not include decimals);

OR • Click on to select an HS number, and then double click on the selected HTS.

11. Qualification Reason field: Type in reason comments if part does not qualify and you wish to provide

information.

12. Producer Code field: Click on and select from the list. (i.e. Yes, No(1), No(2), No(3)

13. Preference Code field: Click on and select from the list. (i.e. A, B, C)

14. COO (Country of Origin) field: a. Country Id is a two character ISO country code. Must be UPPER case. b. Country is also searchable using a list of drop downs options. c. Click on drop down for search criteria options.

P a g e | 6 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

d. Double click on selected country and it will be added to the field. e. You must complete the COO Field even if part does not qualify for NAFTA.

15. RVC field (same as Net Cost field on the NAFTA Certificate of Origin): Click on to select from list, (i.e. NO or NC). Follow steps 7 through 15 for each part on your list.

16. Scroll up to top of Campaign Response header and click Save/Submit button. This can be done at any

time to save your work. If the application is idle over 60 minutes you may be timed out, so we recommend you save often.

17. Click . The generated certificate is based on the Nafta data entered through Option A or Option B.

18. Click on to verify the save, if this pop up appears.

19. The Saved/Submitted Successfully dialog box will appear. Click Ok.

20. Wait – System is downloading NAFTA certificate of Origin. This sometimes takes a few minutes.

‘Save as’ the Downloaded file when ready.

21. If the File Download pop up does not appear, refresh the screen by clicking on “Back to Campaign Search Results”, found at the top right of the screen.

P a g e | 7 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

Then, return back into the campaign and check under attachments tab.

22. Review the NAFTA Certificate of Origin. If there are no errors, print the document. If errors are found, close the NAFTA Certificate of Origin and use the option (A or B) utilized to generate the initial NAFTA Certificate of Origin to correct any errors. Generate the certificate again. Only qualifying parts will show on the Certificate.

23. Complete the following steps:

a. Ensure the address in box 1 is accurate (Seller Name and Address) b. Complete/confirm the Tax ID in box 1 c. Complete the signature fields in box 11a. through 11f. d. The date (11e.) should be the date the Certificate is signed. Do not pre-date the signature date.

24. Scan the Certificate and save to your computer. File name should include NAFTA 2016 and your

company’s name and Ref# ID.

P a g e | 8 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

25. In the Trade Automation system, reference the Campaign Response header section at top of page.

26. Click .

27. Click on and select file to upload.

28. Click Open.

29. Click .

30. A confirmation message will display. Close the dialogue box.

31. Under Campaign Details at the bottom left of the page, reference the Attachments tab section.

32. For a small number of parts, complete step 33.

For a large list of parts, skip step 33 and complete step 34.

33. For updating a small number of parts. a. Click the Part ID row to highlight the first part.

b. Click the Ready For Submit box on the right side of the page for the highlighted Part ID. c. WARNING: Do not check the Ready For Submit box for parts marked as Skip Parts.

d. Click the upper right Save/Submit response button after all parts ‘ready to submit’ are checked.

P a g e | 9 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

34. Repeat steps 34a and 34b for each Part ID. a. Click in box next to Part ID. This will cause all boxes next to each Part to be checked. b. WARNING: Uncheck the Part ID box for parts marked as Skip Parts. c. Click Global Entry.

Click/check this box to select all parts

d. Check the Ready for Submit box. e. Click the Apply button.

35. Click . A confirmation will display and the completed parts will disappear from your list. Donaldson will be automatically notified of your submission.

Option B: Excel Download and Upload This option is recommended for NAFTA requests that have a large number of parts. Please use Excel document extension of .xls. Trade Automation does not support .xlsx documents.

1. From the supplier dashboard, click the hyperlink of the Campaign Name you are responding to.

P a g e | 10 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

2. Reference the Campaign Response header section at top of page.

3. Producer Info field: Click on the dropdown and select to the appropriate option. This populates the producer field on the NAFTA Certificate of Origin.

4. Cert Effective Date field: Default choice is the blanket year. To change the date, click on and select

the date.

5. Cert Expiration Date field: Default choice is the blanket year. To change the date, click on and select the date.

6. At top right, click Save/Submit button.

7. Click the Download Excel button.

8. A new window will open.

P a g e | 11 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

9. Save the file. Then, open in Excel.xls

10. Enter the NAFTA data (AS TEXT) for each part into the Excel spreadsheet. See chart below for guidance.

Responses must be typed exactly as written below and must be in all UPPER case characters as TEXT.

Column reference

Column Name Description

G PART_ID NO ACTION; Do not update H PART_DESC NO ACTION; Do not update I SUPP_PARTID NO ACTION; Do not update J LAST_PO_NUMBER NO ACTION; Do not update K LAST_PO_DATE NO ACTION; Do not update L REQUEST_HS NO ACTION; Do not update M SOLICIT_NAME NO ACTION; Do not update N STATUS NO ACTION; Do not update O RESPONSE_HS

(Harmonize Tariff Schedule or HTS)

• If REQUEST_HS (Column L) above is filled in, copy the HS listed in Column L and paste special formatted as ‘text’ into RESPONSE_HS (Column O).

• If REQUEST_HS (Column L) above is not filled in above or you disagree with the HS provided by Donaldson, type in a 6 digit HS in the RESPONSE_HS (Column O). System accepts numeric values only. System accepts Column O formatted as ‘text’ only. Do not use periods or spaces.

P MAX_HS_DIGITS_FOR_CERT NO ACTION; Do not update Q PART_SKIPPED • Mark Y if part will be temporarily skipped and

full information will be provided at a later time • Leave blank if not skipping • Must be UPPER case

P a g e | 12 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

Column reference

Column Name Description

R QUALIFIED_FLAG • Indicates qualification status of the part • Possible values: Y or N • Type “Y” if part is eligible for NAFTA • Type “N” if part is not NAFTA eligible/does not

qualify • Must be UPPER case • If you do not know if the part qualifies and will

be unable to make that determination, state N. S CERT_EFFECTIVE_DATE NO ACTION; Do not update T CERT_EXPIRATION_DATE NO ACTION; Do not update U QUALIFICATION_REASON NO ACTION; Do not update V Producer Code • Indicates the supplier producer code

• Possible values: YES, NO(1), NO(2), NO(3) • Can be blank if Qualified Flag is “N” • Must be UPPER case

W Preference Code • Indicates the preference criterion code • Possible values: A, B, C, D1 or D2 • Can be blank if Qualified Flag is “N” • Must be UPPER case

X COO • Indicates the Country of Origin. • Enter the 2 character ISO country code • For example, US for United States, MX for

Mexico, and CA for Canada. • Must be UPPER case

Y RVC • Same as Net Cost field on NAFT Cert of Origin • Possible values: NC or NO • Must be UPPER case

Z PRODUCER_OPTION NO ACTION; Do not update AA NAME NO ACTION; Do not update AB ADDRESS1 AC ADDRESS2 AD CITY AE STATE AF POSTAL_CODE AG COUNTRY AH TAX_ID AI PHONE

11. Once complete, save the Excel spreadsheet to your local computer. Please use Excel 2003 document extension of .xls. Trade Automation does not support .xlsx 2007 documents.

P a g e | 13 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

12. Navigate back to the Trade Automation portal and click Upload Excel button located at top of Campaign Response section.

13. Click Browse to locate the document. Select the file.

14. Click Open and the location path will be populated into the window.

15. Click Save to upload the file.

16. If you receive a Processing Result indicating invalid data, go back to Excel spreadsheet, amend data, save, and upload again.

17. After Excel is uploaded proceed to step 18.

18. Click on . The generated certificate is based on the information provided through Option A or Option B.

19. Click on.

20. The Saved/Submitted Successfully dialog box will appear. Click Ok.

21. Wait – System is downloading NAFTA certificate of Origin.

22. Click Open on File Download.

P a g e | 14 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

23. If the File Download pop up does not appear, refresh the screen by clicking on “Back to Campaign Search Results”, found at the top right of the screen.

Then, return back into the campaign and check under attachments tab.

24. Review the NAFTA Certificate of Origin. If no errors, print the document. If errors are found, close the NAFTA Certificate of Origin and use the option (A or B) utilized to generate the initial NAFTA Certificate of Origin to correct any errors. Generate Certificate again. Only qualifying parts will show on the Certificate.

25. Complete the following steps:

a. Ensure the address in box 1 is accurate (Seller Name and Address) b. Complete/confirm the Tax ID in box 1 c. Complete the signature fields in box 11a. through 11f.

i. The date (11e.) should be the date the Certificate is signed. Do not pre-date.

P a g e | 15 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

26. Scan the Certificate and save to your computer.

a. File name should include NAFTA 2016 and your company’s name and Ref# ID...

27. In the Trade Automation system, reference the Campaign Response header section at top of page.

28. Click on

29. Click on and select file to upload.

30. Click Open.

31. Click .

32. A confirmation message will display. Close the dialogue box.

33. Under Campaign Details at the bottom left of the page, reference the Attachments tab section.

34. For a small number of parts, complete step 35. For a long list of parts, skip 35 and complete step 36.

35. For updating a small number of parts. a. Click the Part ID row to highlight the first part.

P a g e | 16 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

b. Click the Ready For Submit box on the right side of the page for the highlighted Part ID. c. WARNING: Do not check the Ready For Submit box for parts marked as Skip Parts.

d. Repeat steps 35a and 35b for each Part ID.

P a g e | 17 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

36. For updating a large number of parts. a. Click in box next to Part ID. This will cause all boxes next to each Part to be checked. b. WARNING: Uncheck the Part ID box for parts marked as Skip Parts. c. Click Global Entry.

d. Check the Ready for Submit box. e. Click the Apply button.

37. Click .

38. A confirmation will display and the completed parts will disappear from your list. Donaldson will be automatically notified of your submission.

Click/check this box to select all parts

P a g e | 18 U p d a t e d - 0 7 / 0 1 / 2 0 1 5

Donaldson Company, Inc. 1400 West 94th Street Bloomington, MN 55431 USA

Mailing Address PO Box 1299 Minneapolis, MN 55440 USA

WARNINGS

Error Messages

1. If you receive an error message, click on the link to review the part causing the error.

2. Fix all identified errors.

3. Click the ‘X’ box in upper right corner of error message block to remove the error message from the

bottom of the screen.

4. Click on .

5. Approved parts will disappear from your list.

6. Generate and upload a corrected NAFTA Certificate of Origin.

Amber Road support: 800-852-6562, Support@AmberRoad.com