Effective
Customer Service (800) 526-2400 • Fax (800) 248-1460
Powder Coated Finishes LCN closers and power operators can be
specified in seven standard or over 180 custom powder coated
finishes. Powder coating provides superior protection against the
effects of weathering and provides a durable, chip resistant
finish. For information about custom finishes, plated finishes and
a special rust inhibiting (SRI) process, see the LCN General
Catalog or CD.
Superior Appearance
O P T I O N A L C U S T O M P O W D E R C O A T E D F I N I S H E
S
Match Doors, Frames, and Hardware
Environmentally Friendly Process
180 Custom Finishes
STAT (BHMA 690) Statuary
AL (BHMA 689) Aluminum
TAN (BHMA 692) Tan
S T A N D A R D P O W D E R C O A T E D F I N I S H E S Colors
shown are approximate. See LCN General Catalog, page 5 for exact
colors.
O P T I O N A L S R I When powder coated closers are installed in
high humidity or potentially corrosive installations like swimming
pools, water treatment facilities or near large bodies of water,
specify LCN SRI Pretreatment. This optional process extends the
corrosion protection offered by powder coat finishes.
O P T I O N A L P L A T E D F I N I S H E S LCN offers 11 plated
finishes at additional cost: US 3, US 4, US 9, US 10, US 10B, US
14, US 15, US 19, US 20, US 26, US 26D
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 3
Control Box Components.............................. 28-29
Actuators, Sensors & Accessories ................ 30-47 Parts
& Accessories ..................................... 48-65
Glossary of Abbreviations ........................... 66-67 Senior,
Middle and Astro Swing Diagram...... 68 Benchmark Diagram
................................... 69 Repair
Information/Prices............................. 70
Warranty/Replacement Form ........................ 71 General
Terms.............................................. 72-73 Terms of
Sale ............................................... 74 LCN
Warranty.............................................. 75
Customer Service (800) 526-2400 • Fax (800) 248-1460
TABLE OF CONTENTS Standard/Custom Finish Samples ............... 2
Table of Contents ......................................... 3 How
to Order Closers ................................... 3 Door Closer
Specialists ................................ 4 Product Application
Guide ............................ 5 Purchase Order Form
................................... 6 Complete Door
Closers................................. 7-23
Magnets....................................................... 24
Specialty Products, Fasteners....................... 25 Control
Boxes .............................................. 26-27
Compressors ...............................................
27
HOW TO ORDER CLOSERS, COMPONENTS, PARTS & ACCESSORIES 1.
Identify the closer series; 330, 1370, 1460, 2030, 4040, 4210T,
4310ME, 4640, 6030, etc. 2. Determine if any additional information
is required, such as: handing, finish, spring size, voltage, etc.
3. Order the material using suffix number with the description and
include all necessary information.
Examples: 4111 Closer x RH x CUSH x AL or 4040SE Closer x 24v x
DKBRZ 4. For additional information on how to order specific
closers, please see the ‘How to Order’ page in each individual
closer section of the
LCN General Catalog or call LCN Customer Service.
SPECIAL NOTES
1. All RAL custom finishes will be powder coated and metal covers
(list add $3) will be substituted for standard covers for all
closers except the 1070, 1260, 1370 & 1460 series. 1460 series
closers may be custom finished but a DS cover (list add $24) must
be selected.
2. LCN offers more than 180 RAL custom finishes. Please see the LCN
custom finish (RAL) chart for color selection. LCN requires a per
order set-up charge ($75 list) for each RAL custom finish per order
and an additional (list add $24) charge per closer. A metal cover
(MC) ($3) is required.
3. LCN also offers a Brite Metallic (MTLPC) powder coat finish. LCN
requires a per order set-up charge ($75) and an additional (list
add $48) charge per closer. Brite Metallic has a US26D appearance
but has the advantage of being a durable powder coat finish. Brite
Metallic combined with our Special Rust Inhibitor (SRI) will
greatly exceed ANSI Standard A156.4 for corrosion resistance. A
metal cover (MC) ($3) is required.
4. Most plated closers use a handed, metal cover. Please provide
handing as necessary. 1460 series closers can be plated but a DS
cover must be selected. Plated 1460 series closer list prices
include the DS cover (no additional charge).
5. LCN plated list prices already include -72MC (1460 includes
-72DS). Disregard the additional list add for metal cover (MC). 6.
Senior Swing, Middle Swing & Astro Swing operators are
available in standard finishes of anodized aluminum (ANCLR) or of
anodized dark
bronze (ANDKB). Optional 'special' anodized finishes are available
in anodized light bronze (ANLTB), anodized medium dark bronze
(ANMDB), anodized black (ANBLK), anodized extra dark bronze (ANXDB)
& anodized champagne (ANCHA). Also, optional custom finishes
(RAL) may be available, consult factory. Optional finishes are
available at 'extra cost'.
7. Senior Swing, Middle Swing & Astro Swing operators list a
-572, -572HL, -572HL/S, -572DD, -572DD/S, -3572HL, -3572HL/S,
-3572DD & -3572DD/S as replacement parts. Please see glossary
of abbreviations on page 66-67 for clarification and definition of
these parts.
8. Benchmark operators are only available in Anodized Clear (ANCLR)
or Anodized Dark Bronze (ANDKB). 9. LCN powder finishes exceed
ANSI/BHMA standard A156.4 for corrosion resistance by at least a
factor of four. LCN powder coat finishes
combined with the LCN Special Rust Inhibitor (SRI) pre-treatment
exceed this standard even further. 10. Special Rust Inhibitor (SRI)
is a pretreatment that is applied prior to the LCN powder coat
finish and greatly exceeds ANSI/BHMA Standard
A156.4 for corrosion resistance. LCN requires an additional (list
add $24) charge per closer. 11. LCN plated finishes exceed
ANSI/BHMA standard A156.4 for corrosion resistance. 12. LCN
products must be shipped with a finish. 13. In some cases, small
parts or electrical components are only available as part of an
assembly. 14. Optional TORX security screw packs can be substituted
for standard screw packs on most closers. See ‘Add for TORX Screw
Pack’ column for addi-
tional charge. In some cases, not all fasteners can be provided as
TORX, consult factory for details. 15. LCN can mark individual
closer boxes with door or opening #’s. Please specify ‘itemized’
when ordering. LCN requires an additional (net add $1)
charge per closer. 16. Special Template (ST) pricing is available
by contacting LCN Customer Service. 17. All closers conform to
standards UL10C and UBC 7-2 (1997). 18. If an item or price is not
listed in the LCN 2008 Price List, consult factory for availability
& pricing. Prices listed in the LCN 2008 Price List are
subject to change without notice. The current LCN ‘Terms of Sale’
applies. All prices listed in the LCN 2008 Price List are in US
dollars.
LCN Customer Service & Technical Support Phone (800) 526-2400
or Fax (800) 248-1460
Since its founding in 1926, LCN has specialized in solving door
control problems through the use of high quality, innovative door
control products. By adhering to high standards of performance, LCN
has earned a leadership role within the industry and is committed
to meeting door control challenges of the future. With
representatives located throughout the world, LCN provides the
products and services necessary to solve your door control
problems.
Cast Iron Heavy-duty cast iron. There isn’t a stronger, harder,
more reliable material for door closers that are expected to
deliver millions of cycles. Cast iron is more compatible with high
grade steel components and is more resistant to the wear of
millions of opening/closing cycles.
10 Million Cycles Why do some hardware professionals claim that LCN
stands for “Last Closer Needed?” LCN closers were put through
grueling independent cycle tests and have exceeded 10 million
cycles.
Forged Steel Arms The closing power and control generated within
LCN closers is transferred to the door through forged steel arms.
Forged steel arms have greater strength, better appearance and less
bulk.
Chrome Silicon Many closer manufacturers use less expensive
oil-tempered springs, but LCN engineers know that such a spring
loses up to 20% of its power after a few thousand cycles. The
chrome silicone springs used in LCN closers have the strength to
perform beyond 10 million cycles.
Heat-Treated LCN forged steel pinions have larger, stronger teeth
and are double heat- treated for the greatest possible strength on
the shaft. Heat treating makes the pinion harder, better able to
resist wear after years of service and results in less stress on
the cylinder.
Special Templates When a standard door closer won’t do the job,
there is only one proven, reliable source for special solutions—
LCN. With over 3,000 special templates on file, LCN can provide a
door control solution for one-of-a-kind doors such as vault,
balanced, over- sized and arch doors.
Hydraulic Fluid LCN uses a special formula hydraulic fluid that
acts as an insulator to keep closer components working smoothly.
This unique all-weather hydraulic fluid eliminates the need for
seasonal adjustments.
Customer Service At a time when machines are picking up more and
more customer calls, real people are answering the phones at LCN.
Every member of our customer service staff is trained and qualified
to assist you with orders, closer selection and special
applications.
The LCN formula for success
Price Book 2008B, Rev. 9-08 • Effective October 25, 20084
DOOR CLOSER SPECIALISTS Customer Service (800) 526-2400 • Fax (800)
248-1460
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 5
October 2008
With the largest and most experienced staff of door control
specialists, LCN has established the highest standards for quality,
durability and performance. LCN has also earned registration to the
ISO 9002 International Standard. LCN offers the broadest line of
heavy duty closers as well as power operators and closers for use
by people who are physically challenged. To see the complete line
of LCN closers and power operators, request a copy of the LCN
General Catalog.
LCN PRODUCT APPLICATION GUIDE
4000 Series, Heavy Duty Concealed Series
Fire/Life Safety Power Operators
4000 Series, Heavy Duty 1000 Series
Concealed Series High Security
Power Operators Fire/Life Safety
4000 Series, Heavy Duty Power Operators Fire/Life Safety
Healthcare • Hospitals • Medical Centers • Science & Research •
Clinics • Nursing Homes
4000 Series, Heavy Duty 1000 Series
Concealed Series High Security
Power Operators Fire/Life Safety
4000 Series, Heavy Duty 1000 Series
Concealed Series Power Operators Fire/Life Safety
Industrial • Manufacturing • Maintenance • Distribution Centers •
Warehouses
4000 Series, Heavy Duty 1000 Series
High Security Fire/Life Safety
High Security Power Operators Fire/Life Safety
Sports/Entertainment • Auditoriums • Theaters • Stadiums •
Gymnasiums • Arenas • Casinos & Riverboats • Convention
Centers
4000 Series, Heavy Duty Concealed Series Power Operators Fire/Life
Safety High Security
Commercial • Apartments • Restaurants • Malls • Retail • Hotels
& Motels • Banks • Condos • Multi-Family Housing
1000 Series Concealed Series Power Operators Fire/Life Safety
Reconstruction
All LCN door closers and power operators can be installed on
existing or new doors in reconstruction projects. Refer to the
specific building types shown for closer and power operator
recommendations.
Corporate • Office Buildings • Training Facilities • Branch Offices
• Research &
Development • Computer Centers
Concealed Series Fire/Life Safety
Power Operators
Customized Products
Occasionally, projects arise that cannot be solved with standard
LCN products. For these special situations, LCN has thousands of
special templates on file. Consult with an LCN applications
engineer to find the correct door control solution.
Customer Service (800) 526-2400 • Fax (800) 248-1460
Price Book 2008B, Rev. 9-08 • Effective October 25, 20086
Customer Service (800) 526-2400 • Fax (800) 248-1460
ORDER FORM
Sold To: _______________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
Arm Type Hand Finish QTY Closer Series or Part # Description As
Listed in Catalog or Parts List RH LH Painted Plated
THIS SPACE FOR FACTORY USE ONLY
Acct # _____________
Quantity ____________
WOG - Y / N
PL ________________
Inv # ______________
Verify ______________
Copy and use as order form. Fax completed order to LCN Customer
Service at (800) 248-1460.
FT
FT
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 7
CLOSER PRICING
* See page 3 for additional ordering information. FT - Call for
availability.
COMPLETE DOOR CLOSERS
1260 Series Plated finish not available
1261.........................................REG $211 N/A N/A 11
$12 1261 .....................................Rw/PA 216 N/A N/A 12
12 1261 ...................................Rw/62A 231 N/A N/A 12 12
1261 ......................................LONG 211 N/A N/A 11 12
1261..............................................H 233 N/A N/A 11
12 1261 .....................................Hw/PA 238 N/A N/A 12
12 1261 ...................................HLONG 233 N/A N/A 11 12
1261 .........................................EDA 231 N/A N/A 13 12
1261 .............................EDA w/62G 231 N/A N/A 13 12 1261
..............................EDA w/145 231 N/A N/A 13 12
1261.......................HEDA (Handed) 260 N/A N/A 13 12 1261
...........HEDA w/62G (Handed) 260 N/A N/A 13 12
1261............HEDA w/145 (Handed) 260 N/A N/A 13 12 1261
......................................CUSH 260 N/A N/A 12 12 1261
...................................HCUSH 309 N/A N/A 12 12
1261....................................SCUSH 376 N/A N/A 12 12
1261 .................................SHCUSH 410 N/A N/A 12 12 Add
for; Delayed Action (DEL) (26), Slim Cover (SLIM) (10), Special
Rust Inhibitor (SRI) (24), Custom Powder Finish (RAL___)* (24),
Brite Metallic (MTLPC)* (48) For parts & accessories, see pages
48-49.
Customer Service (800) 526-2400 • Fax (800) 248-1460
330 Series
October 2008
CLOSER SERIES
LTBRZ (691) BLK (693)
BRASS (696)
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
US26D US 3 US 14 US 4 US 15 US 9 US 19 US 10 US 20 US 10B US
26
PRICE LIST
PLATED FINISHES
Price Book 2008B, Rev. 9-08 • Effective October 25, 20088
* See page 3 for additional ordering information. FT - Call for
availability.
COMPLETE DOOR CLOSERS
1460 Series Plated finish on Designer Series cover and arm
1461.........................................REG $282 $510 $570 9
$12 1461 .....................................Rw/PA 287 570 650 11
12 1461 ...................................Rw/62A 302 N/A N/A 11 12
1461 ......................................LONG 282 510 570 9 12
1461..............................................H 305 605 670 10
12 1461 .....................................Hw/PA 310 665 750 11
12 1461 ...................................HLONG 305 605 670 10 12
1461 ...........................................HD 299 554 618 9 12
1461 .....................................HD/PA 304 614 698 11 12
1461.................................HDw/62A 319 N/A N/A 11 12
1461................................HD/LONG 299 554 618 10 12 1461
.........................................EDA 305 610 683 12 12 1461
.............................EDA w/62G 305 610 683 12 12 1461
..............................EDA w/145 305 610 683 12 12
1461.......................HEDA (Handed) 334 646 725 12 12 1461
...........HEDA w/62G (Handed) 334 646 725 12 12
1461............HEDA w/145 (Handed) 334 646 725 12 12 1461
......................................CUSH 334 646 725 11 12 1461
...................................HCUSH 384 690 780 11 12
1461....................................SCUSH 453 719 807 11 12
1461 .................................SHCUSH 487 778 863 11 12 Add
for; Delayed Action (DEL) (26), Designer Series Cover (DS) (24),
Full Cover (FC) (3), Euro Cover (EC) (3), Lead Lined Cover (LL)
(55), Special Rust Inhibitor (SRI) (24), Custom Powder Finish
(RAL___)* (24), Brite Metallic (MTLPC)* (48) For parts &
accessories, see page 49.
1460T Series Plated finish on Designer Series cover and arm only
1460T, 1461T ...........................STD $323 $551 $618 12 $11
1460T, 1461T................................H 343 571 638 12 11
1460T, 1461T ...................BUMPER 333 561 628 12 11 1460T,
1461T ...............H BUMPER 353 581 648 12 11 Add for; Designer
Series Cover (DS) (24), Full Cover (FC) (3), Euro Cover (EC) (3),
Lead Lined Cover (LL) (55), Special Rust Inhibitor (SRI) (24),
Custom Powder Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48)
For parts & accessories, see page 50.
Customer Service (800) 526-2400 • Fax (800) 248-1460
1460T Series
CLOSER SERIES
LTBRZ (691) BLK (693)
BRASS (696)
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
US26D US 3 US 14 US 4 US 15 US 9 US 19 US 10 US 20 US 10B US
26
PRICE LIST
PLATED FINISHES
October 2008
1460 Series
* See page 3 for additional ordering information.
9
COMPLETE DOOR CLOSERS
2010 Series - (Concealed) (Handed) Plated finish on plate and arm
only 2011, 2013-2016......................STD $455 $692 $767 13 $12
2011, 2013-2016 ..........................H 475 712 787 14 12 2011,
2013-2016 .............BUMPER 465 702 777 13 12 2011,
2013-2016..........H BUMPER 485 722 797 14 12 Add for; Special Rust
Inhibitor (SRI) (24), Custom Powder Finish (RAL___)* (24), Brite
Metallic (MTLPC)* (48) For parts & accessories, see page
50.
2030 Series - Concealed (Handed) Plated finish on plate and arm
only 2031-2035................................STD $754 $1,073
$1,162 14 $14 2031-2035 ....................................H 774
1,093 1,182 14 14 2031-2035........................BUMPER 764 1,083
1,172 14 14 2031-2035....................H BUMPER 784 1,103 1,192
14 14 Add for; Special Rust Inhibitor (SRI) (24), Custom Powder
Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48) For parts &
accessories, see page 50.
2210 Series - High Security/Concealed (Handed) Plated finish on
plate and arm only 2211, 2213-2215......................STD $631
$908 $968 17 STD 2211, 2213-2215DPS ..............STD 709 986 1,046
17 STD Add for; Advanced Variable Backcheck (AVB) (11), Special
Rust Inhibitor (SRI) (24), Custom Powder Finish (RAL___)* (24),
Brite Metallic (MTLPC)* (48) For parts & accessories, see page
50.
2310ME Series - (Handed) (Specify 24v or 120v) Plated finish on
plate and arm only 2313ME-2314ME ....................STD $825
$1,079 $1,144 17 $9 Add for; Bypass Cylinder (B80) or (B140) (80),
Custom Powder Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48)
For parts & accessories, see pages 50-51.
2610 Series - Auto-Equalizer/Pneumatic (Handed) Plated finish on
plate and arm only 2613-2614................................STD
$1,488 $1,759 $1,836 22 $9 Add for; Custom Powder Finish (RAL___)*
(24), Brite Metallic (MTLPC)* (48) See page 26-27 for control boxes
and compressors. Also, see page 30-47 for actuators, tubing, &
accessories. For parts & accessories, see page 51.
Customer Service (800) 526-2400 • Fax (800) 248-1460
CLOSER SERIES
SERIES NUMBER ARM TYPE
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
PRICE LIST
October 2008
LTBRZ (691) BLK (693)
BRASS (696)
US26D US 3 US 14 US 4 US 15 US 9 US 19 US 10 US 20 US 10B US
26
PLATED FINISHES
2010 Series
2310ME Series
2210DPS Series
2030 Series
2610 Series
CLOSER SERIES
ANCLR ANDKB
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
PRICE LIST
PLATED FINISHES
2510 Series - Astro Swing (Concealed) (Handed) Plated finish not
available 2511 ...................................STD/CP $3,902
ANCLR or ANDKB only 78 N/A
2511...................................STD/OP 4,027 ANCLR or ANDKB
only 78 N/A Motor Gearbox is 'Standard Force' (SF) 37" header
length is standard (HL) - Optional header lengths available (please
specify - 37" to 49") STD/CP arm is 3 3/4" spindle center - STD/OP
arm is 3 3/4" spindle center Add for; Double Door Header (specify
length - 49" to 98") (n/a with STD/OP arm) (DD) (205) Positive
Mechanical Stop (n/a with STD/OP arm) (POS) (25), Breakaway Stop
(n/a with STD/OP arm) (BKY) (90) Special Anodized Finish (AN___)*
(450), Custom Paint Finish (RAL____) *(700) See pages 30-47 for
actuators & accessories. For parts & accessories, see page
51.
2550 Series - Astro Swing (Simultaneous Pair Concealed) Plated
finish not available 2553 ...................................STD/CP
$7,224 ANCLR or ANDKB only 155 N/A
2553...................................STD/OP 7,474 ANCLR or ANDKB
only 155 N/A Motor Gearbox is 'Standard Force' (SF) 72" header
length is standard (HL) - Optional header lengths available (please
specify - 72" to 98") STD/CP arm is 3 3/4" spindle center - STD/OP
arm is 3 3/4" spindle center Add for; Positive Mechanical Stop (n/a
with STD/OP arm) (POS) (50), Breakaway Stop (n/a with STD/OP arm)
(BKY) (180) Special Anodized Finish (AN___)* (650), Custom Paint
Finish (RAL____) *(1250) See pages 30-47 for actuators &
accessories. For parts & accessories, see page 51.
October 2008
COMPLETE DOOR CLOSERS Customer Service (800) 526-2400 • Fax (800)
248-1460
2510 Series
2550 Series
Astro Swing Operators may only be available to AAADM Certified
Distributors. Contact your local Ingersoll Rand SSC Consultant for
details.
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 11
CLOSER SERIES
SERIES NUMBER ARM TYPE
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
PRICE LIST
PLATED FINISHES
2810 Series - Senior Swing (Concealed) (Handed) Plated finish not
available 2811 ...................................STD/CP $4,207
ANCLR or ANDKB 78 N/A 2811...................................STD/OP
4,332 ANCLR or ANDKB 78 N/A Motor Gearbox is 'Standard Force' (SF)
- Optional 'Reduced Force' (RF) Motor Gearbox available (please
specify) 36" header length is standard (HL) - Optional header
lengths available (please specify - 36" to 49") STD/CP arm is 2
3/4" spindle center - STD/OP arm is 3 3/4" spindle center Add for;
Double Door Header (specify length - 49" to 98") (n/a with STD/OP
arm) (DD) (205) Positive Mechanical Stop (n/a with STD/OP arm)
(POS) (25), Breakaway Stop (n/a with STD/OP arm) (BKY) (90) Special
Anodized Finish (AN___)* (450), Custom Paint Finish (RAL____)*
(700) See pages 30-47 for actuators & accessories. For parts
& accessories, see pages 51-52.
2850 Series - Senior Swing (Simultaneous Pair Concealed) Plated
finish not available 2853 ...................................STD/CP
$7,189 ANCLR or ANDKB 155 N/A
2853...................................STD/OP 7,439 ANCLR or ANDKB
155 N/A Motor Gearbox is 'Standard Force' (SF) - Optional 'Reduced
Force' (RF) Motor Gearbox available (please specify) 72" header
length is standard (HL) - Optional header lengths available (please
specify - 72" to 98") STD/CP arm is 2 3/4" spindle center - STD/OP
arm is 3 3/4" spindle center Positive Mechanical Stop (n/a with
STD/OP arm) (POS) (50), Breakaway Stop (n/a with STD/OP arm) (BKY)
(180) Add for; Special Anodized Finish (AN___)* (650), Custom Paint
Finish (RAL____)* (1250) See pages 26-27 for actuators &
accessories. For parts & accessories, see page 52.
2860 Series - Senior Swing (Independent Pair Concealed) Plated
finish not available 2863 ...................................STD/CP
$8,471 ANCLR or ANDKB 155 N/A
2863...................................STD/OP 8,721 ANCLR or ANDKB
155 N/A Motor Gearbox is 'Standard Force' (SF) - Optional 'Reduced
Force' (RF) Motor Gearbox available (please specify) 72" header
length is standard (HL) - Optional header lengths available (please
specify - 72" to 98") STD/CP arm is 2 3/4" spindle center - STD/OP
arm is 3 3/4" spindle center Add for; Positive Mechanical Stop (n/a
with STD/OP arm) (POS) (50), Breakaway Stop (n/a with STD/OP arm)
(BKY) (180) Special Anodized Finish (AN___)* (650), Custom Paint
Finish (RAL____)* (1250) See pages 26-27 for actuators &
accessories. For parts & accessories, see page 52.
October 2008
2810 Series
2850 Series
2860 Series
COMPLETE DOOR CLOSERS Customer Service (800) 526-2400 • Fax (800)
248-1460
STANDARD ANODIZED FINISHES
CLOSER SERIES
SERIES NUMBER ARM TYPE
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
PRICE LIST
PLATED FINISHES
2910 Series - Middle Swing (Overhead) (Handed) Plated finish not
available 2911 ...................................STD/CP $4,030
ANCLR or ANDKB only 78 N/A
2911...................................STD/OP 4,155 ANCLR or ANDKB
only 78 N/A Motor Gearbox is 'Standard Force' (SF) 36" header
length is standard (HL) - Optional header lengths available (please
specify - 36" to 49") STD/CP arm is 2 3/4" spindle center - STD/OP
arm is 3 3/4" spindle center Add for; Double Door Header (specify
length - 49" to 98") (n/a with STD/OP arm) (DD) (205) Positive
Mechanical Stop (n/a with STD/OP arm) (POS) (25), Breakaway Stop
(n/a with STD/OP arm) (BKY) (90) Special Anodized Finish (AN___)*
(450), Custom Paint Finish (RAL____)* (700) See pages 30-47 for
actuators & accessories. For parts & accessories, see pages
52-53.
2950 Series - Middle Swing (Simultaneous Pair Concealed) Plated
finish not available 2953 ...................................STD/CP
$6,891 ANCLR or ANDKB only 155 N/A
2953...................................STD/OP 7,141 ANCLR or ANDKB
only 155 N/A Motor Gearbox is 'Standard Force' (SF) 72" header
length is standard (HL) - Optional header lengths available (please
specify - 72" to 98") STD/CP arm is 2 3/4" spindle center - STD/OP
arm is 3 3/4" spindle center Add for; Positive Mechanical Stop (n/a
with STD/OP arm) (POS) (50), Breakaway Stop (n/a with STD/OP arm)
(BKY) (180) Special Anodized Finish (AN___)* (650), Custom Paint
Finish (RAL____) *(1250) See pages 30-47 for actuators &
accessories. For parts & accessories, see page 53.
2960 Series - Middle Swing (Independent Pair Concealed) Plated
finish not available 2963 ...................................STD/CP
$8,182 ANCLR or ANDKB only 155 N/A
2963...................................STD/OP 8,432 ANCLR or ANDKB
only 155 N/A Motor Gearbox is 'Standard Force' (SF) 72" header
length is standard (HL) - Optional header lengths available (please
specify - 72" to 98") STD/CP arm is 2 3/4" spindle center - STD/OP
arm is 3 3/4" spindle center Add for; Positive Mechanical Stop (n/a
with STD/OP arm) (POS) (50), Breakaway Stop (n/a with STD/OP arm)
(BKY) (180) Special Anodized Finish (AN___)* (650), Custom Paint
Finish (RAL____) *(1250) See pages 30-47 for actuators &
accessories. For parts & accessories, see page 53.
October 2008
2950 Series
2960 Series
2910 Series
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 13
CLOSER SERIES
LTBRZ (691) BLK (693)
BRASS (696)
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
US26D US 3 US 14 US 4 US 15 US 9 US 19 US 10 US 20 US 10B US
26
PRICE LIST
PLATED FINISHES
3030 Series - Concealed (Handed) Plated finish on arm only
3031-3034 ...............................REG $325 $462 $500 6 $7
3031-3034 ....................................H 373 518 559 6 7 Add
for; Special Rust Inhibitor (SRI) (24), Custom Powder Finish
(RAL___)* (24), Brite Metallic (MTLPC)* (48) For parts &
accessories, see page 53.
3130 Series - Concealed (Handed) Plated finish on arm only
3131-3133................................STD $358 $505 $544 8 $9
3131-3133 ....................................H 378 525 564 8 9
3131-3133........................BUMPER 368 515 554 8 9
3131-3133....................H BUMPER 388 535 574 8 9 Add for;
Special Rust Inhibitor (SRI) (24), Custom Powder Finish (RAL___)*
(24), Brite Metallic (MTLPC)* (48) For parts & accessories, see
pages 53-54.
3130SE Series - (Handed) (Specify 24v or 120v) Plated finish on arm
only 3133SE-3134SE ......................STD $572 $719 $758 8 $9
3133SE-3134SE ..................LONG 572 719 758 8 9 Add for;
Custom Powder Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48)
For parts & accessories, see page 54.
4000T Series Plated finish on metal cover and arm only 4003T-4004T
............................STD $391 $630 $704 15 $9 Add for; Metal
Cover (MC) (3), Lead Lined Cover (LL) (55), Special Rust Inhibitor
(SRI) (24), Custom Powder Finish (RAL___)* (24), Brite Metallic
(MTLPC)* (48) For parts & accessories, see page 54.
4010 Series - (Handed) Plated finish on metal cover and arm
4011-4016 ...............................REG $355 $658 $755 11 $9
4011-4016 ....................................H 394 705 808 12 9
4011-4016.............................H180* 394 705 808 12 9
4011-4016...................................FL 450 760 863 15 9 Add
for; Delayed Action (DEL) (26) (n/a with size 6), Telephone
Cylinder (TEL) (30), Metal Cover (MC) (3), Lead Lined Cover (LL)
(55), Special Rust Inhibitor (SRI) (24), Custom Powder Finish
(RAL___)* (24), Brite Metallic (MTLPC)* (48) *Requires corner
bracket and opposite hand closer. For parts & accessories, see
page 54.
4010T Series - (Handed) Plated finish on metal cover and arm only
4011T, 4013T-4014T ................STD $380 $611 $673 16 $9 4011T,
4013T-4014T.....................H 400 631 693 16 9 4011T,
4013T-4014T ........BUMPER 390 621 683 16 9 4011T, 4013T-4014T
....H BUMPER 410 641 703 16 9 4011T,
4013T-4014T...................DE 430 661 723 16 9 4011T,
4013T-4014T ............DE HO 450 681 743 16 9 4011T, 4013T-4014T
..DE BUMPER 440 671 733 16 9 4011T, 4013T-4014TDE H BUMPER 460 691
753 16 9 Add for; Metal Cover (MC) (3), Lead Lined Cover (LL) (55),
Special Rust Inhibitor (SRI) (24), Custom Powder Finish (RAL___)*
(24), Brite Metallic (MTLPC)* (48) For parts & accessories, see
pages 54-55.
October 2008
* See page 3 for additional ordering information. FT - Call for
availability.
3030 Series
3130 Series
3130SE Series
4000T Series
4010 Series
4010T Series
4020 Series - (Handed) Plated finish on metal cover and arm
4021-4026 ...............................REG $355 $658 $755 11 $9
4021-4026.............................LONG 355 658 755 11 9
4021-4026 ....................................H 394 705 808 12 9
4021-4026...................................FL 450 760 863 12 9 Add
for; Delayed Action (DEL) (26) (n/a with size 6), Telephone
Cylinder (TEL) (30), Metal Cover (MC) (3), Lead Lined Cover (LL)
(55), Special Rust Inhibitor (SRI) (24), Custom Powder Finish
(RAL___)* (24), Brite Metallic (MTLPC)* (48) For parts &
accessories, see page 55.
4020T Series - (Handed) Plated finish on metal cover and arm only
4021T, 4023T-4024T ................STD $380 $611 $673 15 $9 4021T,
4023T-4024T.....................H 400 631 693 16 9 4021T,
4023T-4024T ........BUMPER 390 621 683 15 9 4021T, 4023T-4024T
....H BUMPER 410 641 703 16 9 Add for; Metal Cover (MC) (3), Lead
Lined Cover (LL) (55), Special Rust Inhibitor (SRI) (24), Custom
Powder Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48) For
parts & accessories, see page 55.
4030 Series - (Non-handed) (New version) Plated finish on metal
cover and arm 4031.........................................REG $306
$535 $615 8 N/A 4031 .....................................Rw/PA 311
595 695 9 N/A 4031 ...................................Rw/62A 326
N/A N/A 8 N/A 4031............................................LD
281 507 567 8 N/A 4031 ......................................LD/PA
286 567 647 8 N/A 4031 ....................................LD/62A
301 N/A N/A 8 N/A 4031 ......................................LONG
306 535 615 8 N/A
4031..............................................H 331 611 675 8
N/A 4031 .....................................Hw/PA 336 671 755 9
N/A 4031 ...................................HLONG 331 611 675 8 N/A
4031 .........................................EDA 331 627 707 9 N/A
4031 ......................................HEDA 350 660 748 9 N/A
4031 ......................................CUSH 350 660 748 9 N/A
4031 ...................................HCUSH 401 712 804 9 N/A
4031....................................SCUSH 474 740 830 9 N/A
4031 .................................SHCUSH 516 800 885 9 N/A Add
for; Lead Lined Cover (LL) (55), Special Rust Inhibitor (SRI) (24),
Custom Powder Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48).
Note - Optional Light Duty (LD), Light Duty w/PA (LD/PA) or Light
Duty w/62A (LD/62A) Arm Available. Please specify. Regular (REG),
Regular w/PA (Rw/PA) and Regular w/62A (Rw/62A) Arms are 'Forged'
steel - Light Duty (LD), Light Duty w/PA (LD/PA) and Light Duty
w/62A (LD/62A) Arms are 'Stamped' steel. Consult factory for more
information. For parts & accessories, see page 55-56.
4030T Series - (Non-handed) (New version) Plated finish on metal
cover and arm only 4031T .......................................STD
$328 $558 $621 9 $12 4031T
...........................................H 348 578 641 9 12 Add
for; Lead Lined Cover (LL) (55), Special Rust Inhibitor (SRI) (24),
Custom Powder Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48)
For parts & accessories, see page 56.
Price Book 2008B, Rev. 9-08 • Effective October 25, 200814
CLOSER SERIES
LTBRZ (691) BLK (693)
BRASS (696)
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
US26D US 3 US 14 US 4 US 15 US 9 US 19 US 10 US 20 US 10B US
26
PRICE LIST COMPLETE DOOR CLOSERS
PLATED FINISHES
October 2008
* See page 3 for additional ordering information. FT - Call for
availability.
Customer Service (800) 526-2400 • Fax (800) 248-1460
4020 Series
4030 Series
4020T Series
4030T Series
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 15
CLOSER SERIES
LTBRZ (691) BLK (693)
BRASS (696)
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
US26D US 3 US 14 US 4 US 15 US 9 US 19 US 10 US 20 US 10B US
26
PRICE LIST
PLATED FINISHES
COMPLETE DOOR CLOSERS Customer Service (800) 526-2400 • Fax (800)
248-1460
PRICE LIST
PLATED FINISHES
October 2008
* See page 3 for additional ordering information. FT - Call for
availability.
FT
FT
FT
4040XP Series Plated finish on metal cover (handed) and arm 4040XP
..................................EDA $416 $743 $846 13 $12 4040XP
.......................EDA w/145 416 743 846 13 12 4040XP
.......................EDA w/62G 416 743 846 13 12 4040XP
................HEDA (Handed) 448 777 880 14 12 4040XP .....HEDA
w/145 (Handed) 448 777 880 14 12 4040XP ....HEDA w/62G (Handed) 448
777 880 14 12 4040XP ..................................REG 394 701
802 12 12 4040XP ...............................Rw/PA 399 721 837
13 12 4040XP ...............................LONG 394 701 802 12 12
4040XP .............................XLONG 421 726 827 12 12 4040XP
.............................Rw/62A 414 N/A N/A 14 12 4040XP
.......................................H 436 752 854 13 12 4040XP
..............................Hw/PA 441 772 879 14 12 4040XP
.............................HLONG 436 752 854 13 12 4040XP
...............................CUSH 448 777 880 14 12 4040XP
.............................HCUSH 491 818 921 14 12 4040XP
.............................SCUSH 562 848 951 15 12 4040XP
..........................SHCUSH 607 912 1017 15 12 Add for; Metal
Cover (MC) (3), Designer Series Cover (DS) (20), Lead Lined Cover
(LL) (55), Special Rust Inhibitor (SRI) (24), Custom Powder Finish
(RAL___)* (24), Brite Metallic (MTLPC)* (48) For parts &
accessories, see pages 57.
4040 Series w/ DS Cover
4040 Series
4040XP Series
CLOSER SERIES
LTBRZ (691) BLK (693)
BRASS (696)
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
US26D US 3 US 14 US 4 US 15 US 9 US 19 US 10 US 20 US 10B US
26
PRICE LIST
PLATED FINISHES
4040T Series Plated finish on metal cover (handed) and arm only
4041T .......................................STD $399 $623 $695 15
$9 4041T ...........................................H 419 643 715
16 9 4041T...............................BUMPER 409 633 705 15 9
4041T ...........................H BUMPER 429 653 725 16 9
4041T..........................DE (Handed) 449 673 745 16 9
4041T......................DE H (Handed) 469 693 765 16 9 4041T
.........DE BUMPER (Handed) 459 683 755 16 9 4041T......DE H BUMPER
(Handed) 479 703 775 16 9 Add for; Metal Cover (Handed) (MC) (3),
Designer Series Cover (DS) (20), Lead Lined Cover (LL) (55),
Special Rust Inhibitor (SRI) (24), Custom Powder Finish (RAL___)*
(24), Brite Metallic (MTLPC)* (48) For parts & accessories, see
pages 56-57.
4040SE Series - (Specify 24v or 120v) Plated finish on metal cover
(handed) and arm only 4040SE
....................................STD $625 $851 $924 12 $12
4040SE ................................LONG 625 851 924 12 12
4040SE .......................DE (Handed) 675 901 974 12 12
SEH.....4040SEH-3038 w/SEH Arm 384 516 550 8 8 Add for; Metal Cover
(MC) (3), Lead Lined Cover (LL) (55), Custom Powder Finish
(RAL___)* (24), Brite Metallic (MTLPC)* (48) For parts &
accessories, see page 57.
4110 Series - (Handed) Plated finish on metal cover and arm
4111-4116................................EDA $355 $658 $755 13 $12
4111-4116.....................EDA w/145 355 658 755 13 12
4111-4116....................EDA w/62G 355 658 755 13 12 4111-4116
.............................HEDA 394 705 808 13 12 4111-4116
..................HEDA w/145 394 705 808 13 12 4111-4116
.................HEDA w/62G 394 705 808 13 12
4111-4116...................................FL 450 760 863 15 12
4111-4116.............................CUSH 394 705 808 13 12
4111-4115 ..........................HCUSH 445 762 868 14 12
4111-4116 ..........................SCUSH 518 793 892 15 12
4111-4115........................SHCUSH 566 869 953 15 12 Add for;
Delayed Action (DEL) (26) (n/a with sizes 5 or 6), Advanced
Variable Backcheck (AVB) (11), Telephone Cylinder (TEL) (30), Metal
Cover (MC) (3), Lead Lined Cover (LL) (55), Special Rust Inhibitor
(SRI) (24), Custom Powder Finish (RAL___)* (24), Brite Metallic
(MTLPC)* (48) Note - When 'Delayed Action' & 'AVB' are
combined, consult LCN for 'Special Template' and additional cost.
For parts & accessories, see page 58.
4110T Series - (Handed) Plated finish on metal cover and arm only
4111T, 4113T-4114T ................STD $380 $611 $673 15 $11 4111T,
4113T-4114T.....................H 400 631 693 16 11 4111T,
4113T-4114T ........BUMPER 390 621 683 15 11 4111T, 4113T-4114T
....H BUMPER 410 641 703 16 11 Add for; Metal Cover (MC) (3), Lead
Lined Cover (LL) (55), Special Rust Inhibitor (SRI) (24), Custom
Powder Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48) For
parts & accessories, see page 58.
Customer Service (800) 526-2400 • Fax (800) 248-1460
PLATED FINISHES
4040SE Series
4040T Series
October 2008
* See page 3 for additional ordering information. FT - Call for
availability.
4110 Series
4110T Series
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 17
CLOSER SERIES
SERIES NUMBER ARM TYPE
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
US26D US 3 US 14 US 4 US 15 US 9 US 19 US 10 US 20 US 10B US
26
PRICE LIST
PLATED FINISHES
4210 Series - High Security (Handed) Plated finish on metal cover
only 4211, 4213-4216......................EDA $412 $492 $522 14 STD
4211, 4213-4216 ..................CUSH 451 531 561 14 STD 4211,
4213-4215................HCUSH 502 582 612 15 STD Add for; Delayed
Action (DEL) (26) (n/a with sizes 5 or 6), Advanced Variable
Backcheck (AVB) (11), Lead Lined Cover (LL) (55), Special Rust
Inhibitor (SRI) (24), Custom Powder Finish (RAL___)* (24), Brite
Metallic (MTLPC)* (48) Note - When 'Delayed Action' & 'AVB' are
combined, consult LCN for 'Special Template' and additional cost.
For parts & accessories, see page 59.
4210T Series - High Security (Handed) Plated finish on metal cover
and arm only 4211T, 4213T-4214T ................STD $496 $698 $759
15 STD Add for; Advanced Variable Backcheck (AVB) (11), Lead Lined
Cover (LL) (55), Special Rust Inhibitor (SRI) (24), Custom Powder
Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48) For parts &
accessories, see page 59.
4310HSA Series - (Handed) (24v) Plated finish on metal cover and
arm only 4311HSA..................................STD $983 $1,290
$1,389 22 $12 4311HSA ....................................DE 1,032
1,329 1,431 23 12 Add for; Custom Powder Finish (RAL___)* (24),
Brite Metallic (MTLPC)* (48) For parts & accessories, see page
59.
4310ME Series - (Handed) (Specify 24v or 120v) Plated finish on
metal cover and arm only 4313ME-4314ME........................SF
$897 $1,203 $1,294 17 $12 4313ME-4314ME .......................DE
953 1,250 1,352 17 12 Add for; Bypass Cylinder (B80) or (B140)
(80), Custom Powder Finish (RAL___)* (24), Brite Metallic (MTLPC)*
(48) For parts & accessories, see page 59.
4410HSA Series - (Handed) (24v) Plated finish on metal cover and
arm 4412HSA .................................REG $930 $1,286 $1,404
22 $12 4412HSA...............................LONG 930 1,286 1,404
22 12 Add for; Custom Powder Finish (RAL___)* (24), Brite Metallic
(MTLPC)* (48) Closer price includes 4410HSA-18 plate for regular
mount or 4410HSA-18G (please specify) plate for flush mount
application. For parts & accessories, see pages 59-60.
4410ME Series - (Handed) (Specify 24v or 120v) Plated finish on
metal cover and arm 4413ME-4414ME ....................REG $851
$1,207 $1,325 17 $12 4413ME-4414ME .................LONG 851 1,207
1,325 17 12 Add for; Bypass Cylinder (B80) or (B140) (80), Custom
Powder Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48) Closer
price includes 4410ME-18 for regular mount or 4410ME-18G (please
specify) plate for flush mount application. For parts &
accessories, see pages 60.
Customer Service (800) 526-2400 • Fax (800) 248-1460
COMPLETE DOOR CLOSERS
STANDARD POWDER COAT
FINISHES AL (689)
LTBRZ (691) BLK (693)
4210T Series
4310ME Series
4310HSA Series
4410ME Series
4410HSA Series
CLOSER SERIES
LTBRZ (691) BLK (693)
BRASS (696)
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
US26D US 3 US 14 US 4 US 15 US 9 US 19 US 10 US 20 US 10B US
26
PRICE LIST
PLATED FINISHES
4510 Series - High Security (Handed) Plated finish on metal cover
only 4511, 4513-4516......................EDA $412 $492 $522 14 STD
Add for; Delayed Action (26) (n/a with size 6), Advanced Variable
Backcheck (AVB) (11), Lead Lined Cover (LL) (55), Special Rust
Inhibitor (SRI) (24), Custom Powder Finish (RAL___) (24), Brite
Metallic (MTLPC) *(48) Note - When 'Delayed Action' & 'AVB' are
combined, consult LCN for 'Special Template' and additional cost.
For parts & accessories, see page 60.
4510T Series - High Security (Handed) Plated finish on metal cover
and arm only 4511T, 4513T-4514T ................STD $496 $698 $759
15 STD Add for; Advanced Variable Backcheck (AVB) (11), Lead Lined
Cover (LL) (55), Special Rust Inhibitor (SRI) (24), Custom Powder
Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48) For parts &
accessories, see page 60.
4630 Series - Auto-Equalizer/Electric (120v) Plated finish on metal
cover and arm only 4631
.........................................STD $4,474 $4,910 $4,988
40 $20 Add for; Custom Powder Finish (RAL___)* (24), Brite Metallic
(MTLPC)* (48) Note - Optional Concealed On/Off Switch (CS)
Available (No Additional Charge) - Please Specify. Consult factory
for more information. See page 30-47 for actuators &
accessories. For parts & accessories, see page 60.
4640 Series - Auto-Equalizer/Electric (120v) Plated finish on metal
cover and arm 4642.........................................REG
$4,429 $4,946 $5,052 40 $20 4642
......................................LONG 4,456 4,966 5,077 40 20
Add for; Custom Powder Finish (RAL___)* (24), Brite Metallic
(MTLPC)* (48) Note - Optional Concealed On/Off Switch (CS)
Available (No Additional Charge) - Please Specify. See page 30-47
for actuators & accessories. For parts & accessories, see
pages 60-61.
4810 Series - Auto-Equalizer/Pneumatic Plated finish on metal cover
and arm only 4811 .........................................STD
$1,461 $1,747 $1,830 19 $11 Add for; Custom Powder Finish (RAL___)*
(24), Brite Metallic (MTLPC)* (48) See page 26-27 for control boxes
and compressors. Also, see page 30-47 for actuators, tubing, &
accessories. For parts & accessories, see page 61.
4820 Series - Auto-Equalizer/Pneumatic Plated finish on metal cover
and arm 4822.........................................REG $1,416
$1,783 $1,894 19 $11 4822
......................................LONG 1,443 1,803 1,919 19 11
Add for; Custom Powder Finish (RAL___)* (24), Brite Metallic
(MTLPC)* (48) Closer price includes 4820-18 plate for regular mount
or 4820-18G (please specify) plate for flush mount application. See
page 26-27 for control boxes and compressors. Also, see page 30-47
for actuators, tubing, & accessories. For parts &
accessories, see page 61.
Customer Service (800) 526-2400 • Fax (800) 248-1460
COMPLETE DOOR CLOSERS PRICE LIST
PLATED FINISHES
4510 Series
4630 Series
October 2008
4510T Series
4640 Series
4820 Series
4810 Series
* See page 3 for additional ordering information. FT - Call for
availability.
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 19
CLOSER SERIES
STANDARD POWDER COAT
FINISHES AL (689)
LTBRZ (691) BLK (693)
BRASS (696)
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
US26D US 3 US 14 US 4 US 15 US 9 US 19 US 10 US 20 US 10B US
26
PRICE LIST
PLATED FINISHES
4840 Series - Auto-Equalizer/Pneumatic Plated finish on metal cover
and arm 4841 .........................................EDA $1,438
$1,825 $1,938 20 $11 4841
......................................CUSH 1,470 1,859 1,972 20 11
4841....................................SCUSH 1,584 1,930 2,043 20
11 Add for; Custom Powder Finish (RAL___)* (24), Brite Metallic
(MTLPC)* (48) See page 23 for control boxes and compressors. Also,
see page 30-47 for actuators, tubing, & accessories. For parts
& accessories, see page 61.
5010 Series - Concealed (Handed) Plated finish on finish plate and
arm 5011-5016 ...............................REG $404 $684 $791 12
$9 5011-5016 ....................................H 443 731 844 13 9
5011-5016 ..............................H180 443 731 844 13 9 Add
for; Delayed Action (DEL) (26), Special Rust Inhibitor (SRI) (24),
Custom Powder Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48)
For parts & accessories, see pages 61-62.
5030 Series - Concealed (Handed) Plated finish on finish plate and
arm 5031-5036 ...............................REG $709 $1,066 $1,184
14 $12 5031-5036 ....................................H 748 1,113
1,237 14 12 5031-5036 ..............................H180 748 1,113
1,237 14 12 Add for; Special Rust Inhibitor (SRI) (24), Custom
Powder Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48) For
parts & accessories, see page 62.
6030 Series - Double Acting/Concealed Plated finish on finish plate
and arm only 6031-6035........................BUMPER $910 $1,198
$1,380 17 $8 6031-6035....................H BUMPER 930 1,218 1,400
17 8 Add for; Special Rust Inhibitor (SRI) (24), Custom Powder
Finish (RAL___)* (24), Brite Metallic (MTLPC)* (48) For parts &
accessories, see page 62.
Customer Service (800) 526-2400 • Fax (800) 248-1460
5010 Series
5030 Series
October 2008
FT
FT
CLOSER SERIES
SERIES NUMBER ARM TYPE
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
PRICE LIST
PLATED FINISHES
October 2008
9130 Series - Benchmark Plated finish not available 9131
................................STD (Pull) $2,752 ANCLR or ANDKB 38
N/A Controller is now 'Premium' (PC) 27" cover (MC) is standard -
Optional 'Full Cover' (FC) (36" to 48") available (please specify)
Add for Full Cover (FC) (80) See pages 30-47 for actuators &
accessories. For parts & accessories, see page 62.
9140 Series - Benchmark Plated finish not available
9142..............................REG (Push) $2,752 ANCLR or ANDKB
38 N/A 9142 ...........................LONG (Push) 2,752 ANCLR or
ANDKB 38 N/A Controller is now 'Premium' (PC) 27" cover (MC) is
standard - Optional 'Full Cover' (FC) (36" to 48") available
(please specify) Add for Full Cover (FC) (80) See pages 30-47 for
actuators & accessories. For parts & accessories, see page
63.
9150 Series - Benchmark (Pair) Plated finish not available
9153............................REG2 (Push) $5,500 ANCLR or ANDKB
85 N/A 9153 .........................LONG2 (Push) 5,500 ANCLR or
ANDKB 85 N/A Controller is now 'Premium' (PC) 72" cover (MC) is
standard - Optional header lengths (60" to 96") available (please
specify) See pages 30-47 for actuators & accessories. For parts
& accessories, see page 63.
COMPLETE DOOR CLOSERS Customer Service (800) 526-2400 • Fax (800)
248-1460
9130 Series
9140 Series
9150 Series
ANCLR ANDKB
* See page 3 for additional ordering information. FT - Call for
availability.
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 21
CLOSER SERIES
SERIES NUMBER ARM TYPE
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
PRICE LIST
PLATED FINISHES
October 2008
COMPLETE DOOR CLOSERS
9330 Series - Astro Swing (Handed) Plated finish not available 9331
................................STD (Pull) $4,007 ANCLR or ANDKB 78
N/A Motor Gearbox is 'Standard Force' (SF) Header w/Angle Brackets
(HL/B) is standard - Optional header w/End Dress Plates (HL/D)
available (please specify) 36" header length is standard - Optional
header lengths available (please specify - 36" to 49") STD arm is 2
3/4" spindle center. Add for; Double Door Header (specify length -
49" to 98") (DD) (205) Special Anodized Finish (AN___)* (450),
Custom Paint Finish (RAL____)* (700) See pages 30-47 for actuators
& accessories. For parts & accessories, see page 63.
9340 Series - Astro Swing (Handed) Plated finish not available
9342..............................REG (Push) $4,007 ANCLR or ANDKB
78 N/A 9342..................LONG (Long Push) 4,007 ANCLR or ANDKB
Motor Gearbox is 'Standard Force' (SF) Header w/Angle Brackets
(HL/B) is standard - Optional header w/End Dress Plates (HL/D)
available (please specify) 36" header length is standard - Optional
header lengths available (please specify - 36" to 49") REG or LONG
arm is 2 3/4" spindle center - Optional 12 1/4" spindle center
available (consult factory) Add for; Double Door Header (specify
length - 49" to 98") (DD) (205) Special Anodized Finish (AN___)*
(450), Custom Paint Finish (RAL____)* (700) See pages 30-47 for
actuators & accessories. For parts & accessories, see page
63.
9350 Series - Astro Swing (Simultaneous Pair) Plated finish not
available 9353 ....................REG2 (Push Pair) $7,214 ANCLR or
ANDKB 155 N/A 9353 ........LONG2 (Long Push Pair) 7,214 ANCLR or
ANDKB 155 N/A 9353.......................STD2 (Pull Pair) 7,214
ANCLR or ANDKB 155 N/A 9353 ......REG/STD (Double Egress) 7,214
ANCLR or ANDKB 155 N/A Motor Gearbox is 'Standard Force' (SF)
Header w/Angle Brackets (HL/B) is standard - Optional header w/End
Dress Plates (HL/D) available (please specify) 72" header length is
standard - Optional header lengths available (please specify - 60"
to 98") REG2, LONG2, STD2 & REG/STD is 2 3/4" spindle center.
Add for; Special Anodized Finish (AN___)* (650), Custom Paint
Finish (RAL____)* (1250) See pages 30-47 for actuators &
accessories. For parts & accessories, see pages 63-64.
9350 Series
9330 Series
9340 Series
STANDARD ANODIZED FINISHES
ANCLR ANDKB
Astro Swing Operators may only be available to AAADM Certified
Distributors. Contact your local Ingersoll Rand SSC Consultant for
details.
* See page 3 for additional ordering information.
Price Book 2008A, Rev. 6-08 • Effective July 28, 200822
CLOSER SERIES
SERIES NUMBER ARM TYPE
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
PRICE LIST
PLATED FINISHES
October 2008
9530 Series - Senior Swing (Handed) Plated finish not available
9531 ................................STD (Pull) $3,908 ANCLR or
ANDKB 78 N/A Motor Gearbox is 'Standard Force' (SF) - Optional
'Reduced Force' (RF) Motor Gearbox available (please specify)
Header w/Angle Brackets (HL/B) is standard - Optional header w/End
Dress Plates (HL/D) available (please specify) 36" header length is
standard - Optional header lengths available (please specify - 36"
to 49") STD arm is 2 3/4" spindle center Add for; Double Door
Header (specify length - 49" to 98") (DD) (205) Special Anodized
Finish (AN___)* (450), Custom Paint Finish (RAL____) *(700) See
pages 30-47 for actuators & accessories. For parts &
accessories, see page 64.
9540 Series - Senior Swing (Handed) Plated finish not available
9542..............................REG (Push) $3,908 ANCLR or ANDKB
78 N/A 9542..................LONG (Long Push) 3,908 ANCLR or ANDKB
78 N/A Motor Gearbox is 'Standard Force' (SF) - Optional 'Reduced
Force' (RF) Motor Gearbox available (please specify) Header w/Angle
Brackets (HL/B) is standard - Optional header w/End Dress Plates
(HL/D) available (please specify) 36" header length is standard -
Optional header lengths available (please specify - 36" to 49") REG
or LONG arm is 2 3/4" spindle center - Optional 12 1/4" spindle
center available (consult factory) Add for; Double Door Header
(specify length - 49" to 98") (DD) (205) Special Anodized Finish
(AN___)* (450), Custom Paint Finish (RAL____) *(700) See pages
30-47 for actuators & accessories. For parts & accessories,
see page 64.
9550 Series - Senior Swing (Simultaneous Pair) Plated finish not
available 9553 ....................REG2 (Push Pair) $6,753 ANCLR or
ANDKB 155 N/A 9553 ........LONG2 (Long Push Pair) 6,753 ANCLR or
ANDKB 155 N/A 9553.......................STD2 (Pull Pair) 6,753
ANCLR or ANDKB 155 N/A 9553 ......REG/STD (Double Egress) 6,753
ANCLR or ANDKB 155 N/A Motor Gearbox is 'Standard Force' (SF) -
Optional 'Reduced Force' (RF) Motor Gearbox available (please
specify) Header w/Angle Brackets (HL/B) is standard - Optional
header w/End Dress Plates (HL/D) available (please specify) 72"
header length is standard - Optional header lengths available
(please specify - 60" to 98") REG2, LONG2, STD2 & REG/STD is 2
3/4" spindle center - Optional 12 1/4" spindle center available
(consult factory) Add for; Special Anodized Finish (AN___)* (650),
Custom Paint Finish (RAL____) *(1250) See pages 30-47 for actuators
& accessories. For parts & accessories, see page 64.
9560 Series - Senior Swing (Independent Pair) Plated finish not
available 9563 ....................REG2 (Push Pair) $8,035 ANCLR or
ANDKB 155 N/A 9563 ........LONG2 (Long Push Pair) 8,035 ANCLR or
ANDKB 155 N/A 9563.......................STD2 (Pull Pair) 8,035
ANCLR or ANDKB 155 N/A 9563 ......REG/STD (Double Egress) 8,035
ANCLR or ANDKB 155 N/A Motor Gearbox is 'Standard Force' (SF) -
Optional 'Reduced Force' (RF) Motor Gearbox available (please
specify) Header w/Angle Brackets (HL/B) is standard - Optional
header w/End Dress Plates (HL/D) available (please specify) 72"
header length is standard - Optional header lengths available
(please specify - 66" to 98") REG2, LONG2, STD2 & REG/STD is 2
3/4" spindle center - Optional 12 1/4" spindle center available
(consult factory) Add for; Special Anodized Finish (AN___)* (650),
Custom Paint Finish (RAL____) *(1250) See pages 30-47 for actuators
& accessories. For parts & accessories, see pages
64-65.
COMPLETE DOOR CLOSERS Customer Service (800) 526-2400 • Fax (800)
248-1460
9530 Series
9540 Series
9550 Series
9560 Series
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 23
CLOSER SERIES
SERIES NUMBER ARM TYPE
S H W I E P I P G I H N T G
A D S D C
R F E OW R
P T A O C R K X
PRICE LIST
PLATED FINISHES
October 2008
COMPLETE DOOR CLOSERS
9730 Series - Middle Swing (Handed) Plated finish not available
9731 ................................STD (Pull) $3,729 ANCLR or
ANDKB 78 N/A Motor Gearbox is 'Standard Force' (SF) Header w/Angle
Brackets (HL/B) is standard - Optional header w/End Dress Plates
(HL/D) available (please specify) 36" header length is standard -
Optional header lengths available (please specify - 36" to 49") STD
arm is 2 3/4" spindle center. Add for; Double Door Header (specify
length - 49" to 98") (DD) (205) Special Anodized Finish (AN___)*
(450), Custom Paint Finish (RAL____)* (700) See pages 30-47 for
actuators & accessories. For parts & accessories, see page
65.
9740 Series - Middle Swing (Handed) Plated finish not available
9742..............................REG (Push) $3,729 ANCLR or ANDKB
78 N/A 9742..................LONG (Long Push) 3,729 ANCLR or ANDKB
78 N/A Motor Gearbox is 'Standard Force' (SF) Header w/Angle
Brackets (HL/B) is standard - Optional header w/End Dress Plates
(HL/D) available (please specify) 36" header length is standard -
Optional header lengths available (please specify - 36" to 49") REG
or LONG arm is 2 3/4" spindle center - Optional 12 1/4" spindle
center available (consult factory) Add for; Double Door Header
(specify length - 49" to 98") (DD) (205) Special Anodized Finish
(AN___)* (450), Custom Paint Finish (RAL____)* (700) See pages
30-47 for actuators & accessories. For parts & accessories,
see page 65.
9750 Series - Middle Swing (Simultaneous Pair) Plated finish not
available 9753 ....................REG2 (Push Pair) $6,451 ANCLR or
ANDKB 155 N/A 9753 ........LONG2 (Long Push Pair) 6,451 ANCLR or
ANDKB 155 N/A 9753.......................STD2 (Pull Pair) 6,451
ANCLR or ANDKB 155 N/A 9753 ......REG/STD (Double Egress) 6,451
ANCLR or ANDKB 155 N/A Motor Gearbox is 'Standard Force' (SF)
Header w/Angle Brackets (HL/B) is standard - Optional header w/End
Dress Plates (HL/D) available (please specify) 72" header length is
standard - Optional header lengths available (please specify - 60"
to 98") REG2, LONG2, STD2 & REG/STD is 2 3/4" spindle center -
Optional 12 1/4" spindle center available (consult factory) Add
for; Special Anodized Finish (AN___)* (650), Custom Paint Finish
(RAL____)* (1250) See pages 30-47 for actuators & accessories.
For parts & accessories, see page 65.
9760 Series - Middle Swing (Independent Pair) Plated finish not
available 9763 ....................REG2 (Push Pair) $7,743 ANCLR or
ANDKB 155 N/A 9763 ........LONG2 (Long Push Pair) 7,743 ANCLR or
ANDKB 155 N/A 9763.......................STD2 (Pull Pair) 7,743
ANCLR or ANDKB 155 N/A 9763 ......REG/STD (Double Egress) 7,743
ANCLR or ANDKB 155 N/A Motor Gearbox is 'Standard Force' (SF)
Header w/Angle Brackets (HL/B) is standard - Optional header w/End
Dress Plates (HL/D) available (please specify) 72" header length is
standard - Optional header lengths available (please specify - 66"
to 98") REG2, LONG2, STD2 & REG/STD is 2 3/4" spindle center -
Optional 12 1/4" spindle center available (consult factory) Add
for; Special Anodized Finish (AN___)* (650), Custom Paint Finish
(RAL____)* (1250) See pages 30-47 for actuators & accessories.
For parts & accessories, see page 65.
Customer Service (800) 526-2400 • Fax (800) 248-1460
9740 Series
9730 Series
9760 Series
9750 Series
PRICE LIST
SEM7800 Series Magnets - (Plated finish not available)
SEM7810-517 New/Available Now! .........................SEM
Extension Kit (75 pcs) $1,875 8 Note: Extension Kit includes 1/2"
extensions (10), 3/4" extensions (10), 1" extensions (10), 2"
extensions (5) & ball pivot/connector links (20 ea). Individual
extensions & ball pivot/connector links are available, please
see page 48 in this price book for part number and list
price.
SEM7820 . . . . . . . . . . . . . . . . . . . . . . . . . . Floor
Mount Magnet (Single Side) 550 5 Standard Profile Armature, Metal
Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.
SEM7830 . . . . . . . . . . . . . . . . . . . . . . . . . . Wall
Mount Magnet 312 4 Standard Profile Armature, Metal Housing, Tri
Voltage (12v/24v/120v) w/ 35lbs. holding force.
SEM7840 . . . . . . . . . . . . . . . . . . . . . . . . . .
Recessed Wall Mount Magnet 312 4 Low Profile Armature, Metal
Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.
SEM7850 . . . . . . . . . . . . . . . . . . . . . . . . . .
Recessed Wall Mount Magnet 312 4 Standard Profile Armature, Metal
Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.
SEM7860 Available Year End 2008! . . . . . . . . . . . . Flush Wall
Mount Magnet 312 4 Flush & Low Profile Armature, Metal Housing,
Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.
SEM7870 New/Available Now!. . . . . . . . . . . . . . . Floor Mount
Magnet (Dual Side) 733 5 Standard Profile Armature, Metal Housing,
Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.
SEM7880 Available Year End 2008! . . . . . . . . . . . . Wall Mount
Magnet 531 4 Low Profile Armature, Hazardous Application, Metal
Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.
SEM1900 Series Magnets - (Plated finish not available) SEM1960
New/Available Now! . . . . . . . . . . . . . . Wall Mount Magnet
250 3 Standard Profile Armature, Plastic Housing, Tri Voltage
(12v/24v/120v) w/ 35lbs. holding force.
SEM1970 New/Available Now! . . . . . . . . . . . . . . Recessed
Wall Mount Magnet 250 3 Low Profile Armature, Plastic Housing, Tri
Voltage (12v/24v/120v) w/ 35lbs. holding force.
SEM1980 New/Available Now! . . . . . . . . . . . . . . Recessed
Wall Mount Magnet 250 3 Standard Profile Armature, Plastic Housing,
Tri Voltage (12v/24v/120v) w/ 35lbs. holding force. For parts &
accessories, see pages 48.
SPECIALTY PRODUCTS
AL (689) DKBRZ (695)
S H W I E P I P G I H N T G
PRICE LIST
October 2008
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 25
Customer Service (800) 526-2400 • Fax (800) 248-1460
PAH60, PAINT AND FASTENERS
Parallel Arm Holder PAH60 (Handed) . . . . . .Door Holder $124 $325
$379 3
Force Gauge ADA/FG . . . . . . . . . . . . .Force Gauge $59
LCN Spray Paint - Available in single cans or cases of 6 (same
color) cans Can . . . . . . . . . . . . . . . . $27 Each can 1/2
Case (6 cans, same color) 125 Each case (6 cans) 4
Fasteners - Individual & Sets SRT (1 ea.) . . . . . . . . . .
.SRT Screw (1 ea.) $1 Self reaming & tapping screw. Size
required. 1 ea SRT (Set of 4 ea.) . . . . .SRT Screw (4 ea.) 3 Self
reaming & tapping screw. Size required. 4 ea. MS (1 ea.) . . .
. . . . . . . .Machine Screw (1 ea.) 1 3 5 Machine screw. Size
required. 1 ea. MS (Set of 4 ea.) . . . . . .Machine Screw (4 ea.)
3 10 13 Machine screw. Size required. 4 ea WS (1 ea.) . . . . . . .
. . . .Wood Screw (1 ea.) 1 Wood screw. Size required. 1 ea. WS
(Set of 4 ea.) . . . . . .Wood Screw (4 ea.) 3 Wood screw. Size
required. 4 ea. TORX (1 ea.) . . . . . . . . .TORX Screw (1 ea.) 2
5 9 TORX machine screw. Size required. 1 ea. TORX (Set of 4 ea.) .
. . .TORX Screw (4 ea.) 5 13 17 TORX machine screw. Size required.
4 ea. TB 1 3/4" (1 ea.) . . . . . .Thru Bolt, Female 2 6 9 Through
bolt. 1 3/4" length. TB 1 3/8" (1 ea.) . . . . . .Thru Bolt, Female
2 6 9 Through bolt. 1 3/8" length TB 1 5/8" (1 ea.) . . . . . .Thru
Bolt, Female 2 6 9 Through bolt. 1 5/8" length TB 1 3/4" (Set of 4
ea.) . .Thru Bolt, Female (4 ea.) 5 21 25 Through bolt. Set of 4
ea. Size required TB 1 3/8" (Set of 4 ea.) . .Thru Bolt, Female (4
ea.) 5 21 25 Through bolt. Set of 4 ea. Size required. TB 1 5/8"
(Set of 4 ea.) . .Thru Bolt, Female (4 ea.) 5 21 25 Through bolt.
Set of 4 ea. Size required. TB/MS (1 ea.) . . . . . . . . .TB(1)
& MS(1) 2 7 9 TB & MS. Set of 1 ea. Size and Series
required. TB/MS (Set of 4 ea.) . . . .TB(4) & MS(4) 6 23 33 TB
& MS. Set of 4 ea. Size and Series required.
Torx (Security) Driver Bits T-10 TORX Bit . . . . . . . .Torx Bit,
T-10 $13 TORX driver bit, size T-10. T-15 TORX Bit . . . . . . .
.Torx Bit, T-15 13 TORX driver bit, size T-15. T-20 TORX Bit . . .
. . . . .Torx Bit, T-20 13 TORX driver bit, size T-20 T-25 TORX Bit
. . . . . . . .Torx Bit, T-25 13 TORX driver bit, size T-25. T-27
TORX Bit . . . . . . . .Torx Bit, T-27 13 TORX driver bit, size
T-27
Adjustment Wrenches HEX 3/32 Wrench . . . . .Reg Screw Wrench $2
Wrench to adjust valves & secure cover. HEX 5/32 Wrench . . . .
.Spring Adj. Wrench 2 Wrench to adjust spring power on spring tube.
T1157 . . . . . . . . . . . . . .Hold Open Wrench 4 Hold Open
Adjustment Wrench
PRICE LIST
LTBRZ (691) BLK (693)
BRASS (696)
S H W I E P I P G I H N T G
US26D US 3 US 14 US 4 US 15 US 9 US 19 US 10 US 20 US 10B US
26
PLATED FINISHES
October 2008
PRICE LIST
7981ES ...........Control Box, Pnuematic, Electric Strike (ES)
Relay, Internal Compressor. 2,403 27 Self-contained control
box/compressor combination for single door application. Includes
-3960 Compressor Assembly, -3390A Relay.
7982................Control Box, Pnuematic, Internal Compressor
2,924 34 Self-contained control box/compressor combination for
either independent, simultaneous or sequential operation of two (2)
door leaves. Includes -3960 Compressor Assembly.
7982S .............Control Box, Pnuematic, Sequential (S) Feature,
Internal Compressor. 3,175 34 Self-contained control box/compressor
combination for independent, simultaneous or sequential operation
of two (2) door leaves. Includes -3960 Compressor Assembly, -3426
Sequencer Card.
7982ES ...........Control Box, Pnuematic, Electric Strike (ES)
Relays, Internal Compressor. 3,515 34 Self-contained control
box/compressor combination for independent, simultaneous or
sequential operation of two (2) door leaves. Includes -3960
Compressor Assembly, -3390A & -3390B Relays.
7982SES .........Control Box, Pnuematic, Sequential (S) Feature,
Electric Strike (ES) Relays, 3,742 34 Internal Compressor.
Self-contained control box/compressor combination for independent
or simultaneous operation of two (2) door leaves. Includes -3960
Compressor Assembly, -3390A & -3390B Relays, -3426 Sequencer
Card.
7900 Series Control Boxes 7901................Control Box,
Pnuematic $1,417 14
Single door application or independent control of single door in
multiple door systems. Two door leaves can be operated, if
activated simultaneously. Requires a separate 900 Series
compressor.
7901ES ...........Control Box, Pnuematic Electric Strike (ES)
Relay. 1,757 14 Single door application or independent control of
single door in multiple door systems. Two door leaves can be
operated, if activated simultaneously. Includes -3390A Relay.
Requires a separate 900 Series compressor.
7902................Control Box, Pnuematic 1,939 15 Independent
operation of two (2) door leaves or simultaneous and/or sequential
operation of four (4) door leaves. Requires a separate 900 Series
compressor.
7902S .............Control Box, Pnuematic, Sequential (S) Feature
2,188 15 Independent operation of two (2) door leaves or
simultaneous and/or sequential operation of four (4) door leaves.
Includes -3426 Sequencer Card. Requires a separate 900 Series
compressor.
7902ES ............Control Box, Pnuematic, Electric Strike (ES)
Relays 2,539 15 Independent operation of two (2) door leaves or
simultaneous and/or sequential operation of four (4) door leaves.
Includes -3390A & -3390B Relays. Requires a separate 900 Series
compressor.
7902SES.........Control Box, Pnuematic, Sequential (S), Electric
Strike (ES) Relays 2,778 15 Independent operation of two (2) door
leaves or simultaneous and/or sequential operation of four (4) door
leaves. Includes -3390A & -3390B Relays, -3426 Sequencer Card.
Requires a separate 900 Series compressor.
Note: Locate a 7980 Series Control Box within 50 linear tubing feet
of the door. Locate a 7900 Series Control Box within 100 linear
tubing feet of the door. Use -925 Pnuematic Tubing to connect
operator and control box. 7900 Series Control Boxes require a
separate air source, LCN 900 Series Compressors are recommended.
For parts & accessories, see pages 28-29.
LIST PRICEPRODUCT DESCRIPTION
S H W I E P I P G I H N T G
October 2008
CONTROL BOXES & COMPRESSORS
CONTROL BOXES
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 27
PRICE LIST
7940 Series Control Boxes - (Requires LCN 900 series compressor)
7949................Control Box, Pneumatic, Auxiliary 'Blow-Open'
$1,167 14
Control box works with or without 7901/7902 Series Control Box and
one or two pnuematic Auto Equalizers. Controlled by the smoke
evacuation system, the 7949 Series Control Box will open the
door(s) to allow fresh air into building.
7949ES ...........Control Box, Pneumatic, Auxiliary 'Blow-Open',
Electric Strike (ES) Relay. 1,451 14 Auxiliary 'blow-open' control
box works with or without 7901ES/7902ES Series Control Box and one
or two pnuematic Auto Equalizers. Controlled by the smoke
evacuation system, the 7949 Series Control Box will unlock and open
the door(s) to allow fresh air into building.
Note: A ‘blow-open’ system requires a separate air source. A
'blow-open' system that includes an automatic or power operator
function also requires a separate air source and is limited to the
operation of two (2) door leaves. In both cases, the LCN 900 Series
Compressors are recommended. 7940 Series Control Boxes should be
installed within 100 linear tubing feet of the automatic
operator(s). For parts & accessories, see page 28-29.
900 Series Compressors 920..................Compressor, 2 Gallon
Tank $2,267 48
Normal usage would allow the function of up to two (2) Auto
Equalizers. Includes auto drain. 23" length x 9" width x 17"
height.
921..................Compressor, 12 Gallon Tank 3,515 90 Normal
usage would allow the function of up to four (4) Auto Equalizers.
Includes auto drain. 31" length x 14" width x 21" height.
922..................Compressor, 20 Gallon Tank 4,661 118 Normal
usage would allow the function of up to eight (8) Auto Equalizers.
Includes auto drain. 33" length x 20" width x 27" height.
923..................Compressor, 30 Gallon Tank 9,141 175 Normal
usage would allow the function of up to twenty (20) Auto
Equalizers. Includes auto drain. 38" length x 23" width x 30"
height.
Note: 900 Series Compressors should be installed within 500 linear
feet of the 7900 or 7940 Series Control Box. 900 Series Compressors
are not manufactured by LCN and would carry the one (1) year
warranty offered by the original manufacturer. For warranty
questions, please contact Gast Manufacturing at (269) 926-6171.
Parts & accessories are not available.
7940 Series Control Box (15 x 15 x 6)
900 Series Compressor
LIST PRICEPRODUCT DESCRIPTION
S H W I E P I P G I H N T G
October 2008
CONTROL BOXES AND COMPRESSORS
CONTROL BOX COMPONENTS PRICE LIST
Customer Service (800) 526-2400 • Fax (800) 248-1460
Control Box Components 293G .....................Muffler $20
Exhaust muffler for 7901, 7902, 7981, or 7982 Series Control Boxes.
319 ........................Fitting, “T” 2 “T” fitting to connect
925 pneumatic tubing. 320 ........................Fitting, “Inline”
2 “Inline” fitting to connect 925 pneumatic tubing. 329
........................Air Filter Assembly 51 Replacement inlet
air filter for the 7981 or 7982 Series Control Boxes. 329G
.....................Air Filter Assembly 165 Replacement inlet air
filter for the 7901 or 7902 Series
Control Boxes. Includes -929 Air Filter Assembly. 390
........................Relay 165 Single pole, double throw (SPDT)
relay only for the 7901,
7902, 7981, & 7982 Series Control Boxes.
390C......................Relay 175 Double pole, double throw
(DPDT) relay only for the
7949 series 'blow open' Series Control Box. 900
........................Power Supply, 10T 380 Main power
supply/input board for the 7901, 7902,
7981, & 7982 Series Control Boxes. Ten (10) terminals. 903
........................Timer Module 165 0-30 second timer module
for 7901, 7902, 7981, &
7982 Series Control Box. Plugs into the -900 Power Supply Board.
925 ........................Pneumatic Tubing 1.75/ft Flexible
pneumatic tubing with an 1/8" inner diameter & 1/4" outer
diameter. Specify number of linear feet required when ordering. 929
........................Filter & Seal 22 Internal filter &
seal component to the 329G Air Filter Assembly. 941
........................Valve Assembly 562 Regulator valve assembly
for the 7901 series control box. 941C......................Valve
Assembly 562 Regulator valve assembly for the 7949 series control
box. 942 ........................Valve Assembly 1,083 Regulator
valve assembly for the 7902 series control box. 962
........................Isolator 18 Rubber isolator for 7981 or
7982 compressor (-3960) assembly.
Control Box Components 3293 ......................Filter Service
Kit $70 Filter replacement for 7981 or 7982 Series Control
Box
Includes -329 Inlet Filter, plastic elbow, short piece of -925
tubing.
3299A....................Solenoid Assembly 317 Air valve assembly
for the 7981 Series Control Box or the Valve 'A' 'A' circuit valve
assembly in the 7982 Series Control Box.
3299B....................Solenoid Assembly 343 Air valve assembly
for the 'B' circuit in the 7982 Series Valve 'B' Control Box.
3328 ......................Copper Coupler 18 Converts pnuematic
tubing connection to copper.
3390A....................'A' Relay Package 376 Electric strike (ES)
relay for 7901 and 7981 Series Control Boxes or the 'A' circuit ES
relay assembly used in the 7902 and 7982. Series Control BoxesCan
be added to a standard control box to convert to ES operation.
Includes -390 Relay, relay base and wire harness. The 3390A is
included when either a 7901ES, 7902ES, 7981ES or 7982ES is
ordered.
3390B....................'B' Relay Package 376 Electric strike (ES)
relay for 'B' circuit in either the 7901 or 7981 Series Control
Boxes. Can be added to a standard control box to convert to ES
operation. Includes -390 Relay, relay base and wire harness. The
3390B is included when either a 7902ES or 7982ES is ordered.
3390C ...................'C' Relay Package 376 Electric strike (ES)
relay assembly for the 7949 series 'blow-open' control box.
Includes -390C Relay, relay base and wire harness. The 3390C is
included when a 7949ES is ordered.
3426 ......................Sequencer Card 251 Dual, 0-30 second
timer module for 7902 or 7982 Series Control Box. Can be added to a
standard 7902 or 7982 Series Control Box to convert box to
sequential operation.-3426 Sequencer card is included when either a
7902S or 7982S Series Control Box is ordered.
3592 ......................Compressor Service Kit 54 Service kit
for air pressure adjustment in the either the 7981 or 7982 Series
Control Box.
3960 ......................Compressor Assembly 1,416 Internal air
pump assembly for the 7981 or 7982 Series Control Box. -3960
Compressor Assembly includes starter capacitor, -962 Isolators and
-329 Air Filter Assembly.
CONTROL BOX COMPONENTS
2008
900
903
3426
3960
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 29
October 2008
Customer Service (800) 526-2400 • Fax (800) 248-1460
Control Box Componenets
8310 Series Actuators - Jamb Mount - 1-1/2" x 4-3/4" Rectangle -
Interior Installation Only 8310-818...............Actuator, Jamb
Mount $129 Actuator, 1-1/2" x 4-3/4" Rectangle, Logo
8310-818T ............Actuator, Jamb Mount 129 Actuator, 1-1/2" x
4-3/4" Rectangle, Logo, Text
8310-3818WF.......Actuator, Jamb Mount 305 Actuator, 1-1/2" x
4-3/4" Rectangle, Logo, Wireless, Flush Mount Includes 8310-818
Actuator, 8310-844J Transmitter Kit, 8310-819F Flush Box. Requires
8310-865 Receiver.
8310-3818WS.......Actuator, Jamb Mount 305 Actuator, 1-1/2" x
4-3/4" Rectangle, Logo, Wireless, Surface Mount Includes 8310-818
Actuator, 8310-844J Transmitter Kit, 8310-819S Surface Box.
Requires 8310-865 Receiver.
8310-3818TWF.....Actuator, Jamb Mount 305 Actuator, 1-1/2" x 4-3/4"
Rectangle, Logo, Text, Wireless, Flush Mount Includes 8310-818T
Actuator, 8310-844J Transmitter Kit, 8310-819F Flush Box. Requires
8310-865 Receiver.
8310-3818TWS ....Actuator, Jamb Mount 305 Actuator, 1-1/2" x 4-3/4"
Rectangle, Logo, Text, Wireless, Surface Mount Includes 8310-818T
Actuator, 8310-844J Transmitter Kit, 8310-819S Surface Box.
Requires 8310-865 Receiver.
8310-865...............Receiver 155 Receiver, Wireless, 1 Channel,
Sequencing Feature Used in conjunction w/ Wireless Actuators &
Transmitters
8310 Series Actuators - Wall Mount - 4-1/2" Round
8310-856...............Actuator, Wall Mount $151 Actuator, 4-1/2"
Round, Logo
8310-856T ............Actuator, Wall Mount 151 Actuator, 4-1/2"
Round, Logo, Text
8310-3856WF.......Actuator, Wall Mount 428 Actuator, 4-1/2" Round,
Logo, Wireless, Flush Mount. Includes 8310-856 Actuator, 8310-844
Transmitter Kit, 8310-868F Flush Box, 8310-800 Weather Ring.
Requires 8310-865 Receiver.
8310-3856WS.......Actuator, Wall Mount 428 Actuator, 4-1/2" Round,
Logo, Wireless, Surface Mount Includes 8310-856 Actuator, 8310-844
Transmitter Kit, 8310-868S Surface Box, 8310-800 Weather Ring.
Requires 8310-865 Receiver.
8310-3856TWF.....Actuator, Wall Mount 428 Actuator, 4-1/2" Round,
Logo, Text, Wireless, Flush Mount Includes 8310-856T Actuator,
8310-844 Transmitter Kit, 8310-868F Flush Box, 8310-800 Weather
Ring. Requires 8310-865 Receiver.
8310-3856TWS ....Actuator, Wall Mount 428 Actuator, 4-1/2" Round,
Logo, Text, Wireless, Surface Mount Includes 8310-856T Actuator,
8310-844 Transmitter Kit, 8310-868S Surface Box, 8310-800 Weather
Ring. Requires 8310-865 Receiver.
8310-865...............Receiver 155 Receiver, Wireless, 1 Channel,
Sequencing Feature Used in conjunction w/ Wireless Actuators &
Transmitters
Price Book 2008B, Rev. 9-08 • Effective October 25, 200830
FT - Call for availability.
ACTUATORS & ACCESSORIES
8310-818
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 31
October 2008
819S
8310 Series Actuators - Wall Mount - 4-3/4" Square 8310-853
.............Actuator, Wall Mount $190 Actuator, 4-3/4" Square,
Logo
8310-853T ...........Actuator, Wall Mount 190 Actuator, 4-3/4"
Square, Logo, Text
8310-853WP .......Actuator, Wall Mount 518 Actuator, 4-3/4" Square,
Logo, Wireless, Surface Mount Easy mount, 'all in one', low
profile, surface mount, wireless actuator. Requires 8310-865
Receiver
8310-853TWP .....Actuator, Wall Mount 518 Actuator, 4-3/4" Square,
Logo, Text, Wireless, Surface Mount Easy mount, 'all in one', low
profile, surface mount, wireless actuator. Requires 8310-865
Receiver
8310-3853WF......Actuator, Wall Mount 518 Actuator, 4-3/4" Square,
Logo, Wireless, Flush Mount Includes 8310-853, 8310-844 Transmitter
Kit, 8310-867F Flush Box, 8310-801 Weather Ring. Requires 8310-865
Receiver
8310-3853WS .....Actuator, Wall Mount 479 Actuator, 4-3/4" Square,
Logo, Wireless, Surface Mount Includes 8310-853, 8310-844
Transmitter Kit, 8310-867S Surface Box, 8310-801 Weather Ring.
Requires 8310-865 Receiver
8310-3853TWF......Actuator, Wall Mount 479 Actuator, 4-3/4" Square,
Logo, Text, Wireless, Flush Mount Includes 8310-853T, 8310-844
Transmitter Kit, 8310-867F Flush Box, 8310-801 Weather Ring.
Requires 8310-865 Receiver
8310-3853TWS......Actuator, Wall Mount 479 Actuator, 4-3/4" Square,
Logo, Text, Wireless, Surface Mount Includes 8310-853T, 8310-844
Transmitter Kit, 8310-867S Surface Box, 8310-801 Weather Ring.
Requires 8310-865 Receiver
8310-865 .............Receiver 155 Receiver, Wireless, 1 Channel,
Sequencing Feature Used in conjunction w/ Wireless Actuators &
Transmitters
8310 Series Actuators - Wall Mount - 4-3/4" Square - Specialty
8310-813 .............Actuator, Wall Mount $692 Actuator, 4-3/4"
Square, Touchless, Wall Mount
'K' Band Technology 'Hands Free' operation, system is activated by
movement near actuator face. Mounts in 4" x 4" electrical box -
Includes black plexiglass cover
8310-855 .............Actuator, Wall Mount 303 Actuator, 4-3/4"
Square, Logo, Dual Vestibule
8310-3855WF......Actuator, Wall Mount 721 Actuator, 4-3/4" Square,
Logo, Dual Vestibule, Wireless, Flush Mount Includes 8310-855
Actuator, 8310-844 Transmitter (2), 8310-867F Flush Box, 8310-801
Weather Ring. Requires 8310-865 Receiver (2)
8310-3855WS .....Actuator, Wall Mount 721 Actuator, 4-3/4" Square,
Logo, Dual Vestibule, Wireless, Surface Mount Includes 8310-855
Actuator, 8310-844 Transmitter (2), 8310-867S Surface Box, 8310-801
Weather Ring. Requires 8310-865 Receiver (2)
8310-865 .............Receiver 155 Receiver, Wireless, 1 Channel,
Sequencing Feature Used in conjunction w/ Wireless Actuators &
Transmitters
PRICE LIST
FT - Call for availability.
Customer Service (800) 526-2400 • Fax (800) 248-1460
8310-853
8310-853T
8310-855
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 33
October 2008
867F
8310-3853WS
853
844867S
8310-853T
853T
844
8310-3853TWF
8310-853WP
8310-855
FT - Call for availability.
8310 Series Actuators - Wall Mount - 6" Round 8310-852
.............Actuator, Wall Mount $199 Actuator, 6" Round,
Logo
8310-852T ...........Actuator, Wall Mount 199 Actuator, 6" Round,
Logo, Text
8310-852WP .......Actuator, Wall Mount 518 Actuator, 6" Round,
Logo, Wireless, Surface Mount Easy mount, 'all in one', low
profile, surface mount, wireless actuator. Requires 8310-865
Receiver.
8310-852TWP .....Actuator, Wall Mount 518 Actuator, 6" Round, Logo,
Text, Wireless, Surface Mount Easy mount, 'all in one', low
profile, surface mount, wireless actuator. Requires 8310-865
Receiver.
8310-3852WF......Actuator, Wall Mount 485 Actuator, 6" Round, Logo,
Wireless, Flush Mount Includes 8310-852 Actuator, 8310-844
Transmitter Kit, 8310-869F Flush Box, 8310-802 Weather Ring.
Requires 8310-865 Receiver.
8310-3852WS .....Actuator, Wall Mount 485 Actuator, 6" Round, Logo,
Wireless, Surface Mount Includes 8310-852 Actuator, 8310-844
Transmitter Kit, 8310-869S Surface Box, 8310-802 Weather Ring.
Requires 8310-865 Receiver.
8310-3852TWF .....Actuator, Wall Mount 485 Actuator, 6" Round,
Logo, Text, Wireless, Flush Mount Includes 8310-852T Actuator,
8310-844 Transmitter Kit, 8310-869F Flush Box, 8310-802 Weather
Ring. Requires 8310-865 Receiver.
8310-3852TWS .....Actuator, Wall Mount 485 Actuator, 6" Round,
Logo, Text, Wireless, Surface Mount Includes 8310-852T Actuator,
8310-844 Transmitter Kit, 8310-869S Surface Box, 8310-802 Weather
Ring. Requires 8310-865 Receiver.
8310-865 .............Receiver 155 Receiver, Wireless, 1 Channel,
Sequencing Feature Used in conjunction w/ Wireless Actuators &
Transmitters
ACTUATORS & ACCESSORIES PRICE LIST
8310-852852
8310-852T
8310-852WP
8310-852TWP
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 35
October 2008
8310-852T
Customer Service (800) 526-2400 • Fax (800) 248-1460
8310 Series Actuator Packages 8310-3822T .........Actuator Package
$316 Actuator Package, 1-1/2" x 4-3/4", Jamb Mount
Includes 8310-818T (2) Jamb Mount Actuator, (2) Surface Mount Box.
8310-819S Recommended for interior use only.
8310-3822TW......Actuator Package 764 Actuator Package, 1-1/2" x
4-3/4", Wireless, Jamb Mount Includes 8310-818T (2) Jamb Mount
Actuator, 8310-819S (2) Surface Mount Box, 8310-844J (2) Jamb Mount
Transmitter, 8310-865 Receiver. Recommended for interior use
only.
8310-3860T .........Actuator Package 528 Actuator Package, 4-1/2"
Round, Wall Mount. Includes 8310-856T (2) Wall Mount Actuator,
8310-868S Surface Mount Box
8310-3860TW......Actuator Package 977 Actuator Package, 4-1/2"
Round, Wireless, Wall Mount Includes 8310-856T (2) Wall Mount
Actuator, 8310-868S (2) Surface Mount Box, 8310-800 (2) Weather
Ring, 8310-844 (2) Transmitter, 8310-865 Receiver
8310-3857T .........Actuator Package 630 Actuator Package, 4-3/4"
Square, Wall Mount. Includes 8310-853T (2) Wall Mount Actuator,
8310-867S (2) Surface Mount Box
8310-3857TW......Actuator Package 1,080 Actuator Package, 4-3/4"
Square, Wall Mount. Includes 8310-853T (2) Wall Mount Actuator,
8310-867S (2) Surface Mount Box, 8310-801 (2) Weather Ring,
8310-844 (2) Transmitter, 8310-865 Receiver
ACTUATORS & ACCESSORIES PRICE LIST
818T (2) 819S (2)
Price Book 2008B, Rev. 9-08 • Effective October 25, 2008 37
October 2008
8310-3822TW
844 (2)
FT - Call for availability.
8310 Series Actuator Accessories 8310-800 .............Ring,
Weather $17 Weather Ring, 4-1/2" Round
Optional accesory. Can be used w/ any