Double Acting Hydraulic Cylinders - SURPLUS · PDF fileWhat is the Surplus Center? ... All of...

SURPLUSCENTER®

Catalog 289 - 2016 Edition

Order Online or by Phone!www.surpluscenter.com1-800-488-34071015 West “O” Street, Lincoln, NE 68528

2 Just Arrived! www.surpluscenter.com8

Order Online www.surpluscenter.com or by Phone 1-800-488-3407Complete Order Information And Shipping Rates Can Be Found On Pages 96 - 97

0.059 RPM, 24 Volt RotaryActuator

ITEM 5-1843 $399.95• NEW SolFocus 24 volt DC slewing driverotary actuator assembly. Originally madefor mounting a solar panel on a metal pole.The assembly allowed the panel to be ad-justed by rotation and elevation for opti-mum alignment to the sun.• Output solar panel motor/bracket assem-bly rotates on a ⅜˝ thick plate mounted tothe slew drive. This ⅜˝ plate with the ring ofmounting bolts on the slew drive was thenbolted to the steel mounting pole. Thewhole assembly then rotated on the pole.• The steel frame tilts on two heavy dutypillow block bearings to provide the eleva-tion alignment with a linear actuator (OurITEM 5-1842). Various mounted encodersand sensors for feedback control. Rated for24 volts but will operate on 12 volts at re-duced speed and output. Slewing drive canrotate 360°. Gearmotor bolted to slewingdrive could be removed to use other drivemethods. Ideal for use on solar panels orfor using components to build machineryjigs and other rotary motion applications. SPECIFICATIONS • Motor enclosure TENV• Speed 0.059 RPM • Face mount for pole mount• Voltage 24 VDC 18 bolt on 390mm (15.354˝)• Amperage 4.2 Amps bolt circle• Power 1/10 HP • Face mount bolt• Torque 8 kNm (5900 ft.lbs.) size M16-2.0• Gearmotor ratio 266.3:1 • Mount for solar panel• Slewing drive ratio 85:1 131/16˝ x 24˝ wide• Rotation reversible • Size 43˝ x 24˝ x 24˝• Motor duty continuous • Shpg. 800 lbs.

Truck freight only.

5 HP, 230 VAC Compressor Duty Motor

ITEM 10-3025$179.95

• New, MARATHON ELECTRIC Model9038 Special duty motor designed to re-place motors on compressors. Thermaloverload protection with manual reset.Steel frame and base. Welded base. Ca-pacitor start/capacitor run.• Confirm your motor name plate data tagincluding voltage, amperage, speed, frameand shaft diameter to match this motorspecifications for proper operation.SPECIFICATIONS • Bearings Ball• 5 HP Definite Purpose • Enclosure ODPSpecial Compressor Duty • Cont. compressor duty

• Voltage 230 VAC • Frame 56H• Amperage 19.6 Amps • Mount rigid welded base• Speed 3450 RPM • Shaft ⅝˝ diam. x 1⅞˝• Phase 1 w/ 3/16˝ keyway• Rotation CCW • Size 12½˝ x 7˝ x 8˝• Service factor 1.0 • Shpg. 51 lbs.

4˝ x 2˝ CasterSet

ITEM 1-4706$8.95

• New, ALBION Model KITDCPB04241001toolbox caster set includes two rigid andtwo swivel casters and mounting hard-ware. Swivel casters have brakes.SPECIFICATIONS• Wheel size 4˝ dia. x 2˝ w. • Mount 4 bolt holes on• Set load capacity 720 lbs. 3˝ x 1¾˝ centers• Top plate 3¾˝ x 2¾˝ • Bolt holes 5/16˝ dia.• Mounting height 415/16˝ • Shpg. 6 lbs.

4.10/3.50-4WheelAssemblyITEM 1-4947$8.99• New, pneumatic tire mounted on whitesteel rim.SPECIFICATIONS • Hub type offset• Size 4.10/3.50-4 • Ball bearing• Outside diameter 10˝ • Tubeless• Cross section 3¾˝ • Pressure 24 PSI max.• Tread Turf • Ply rating 2• Hub ¾˝ bore x 2¼˝ wide • Shpg. 6 lbs.

160 CFM, 115 VACCentrifugal

BlowerITEM 16-1509$79.95

• New, JAKEL Model F33HX10001 119279-00 centrifugal blower. Manufacturer Part#PP-355. Ideal for use on corn or woodstoves and other general purpose air move-ment. Metal housing and blower wheel. Wiremesh screen on inlet. Thermally protected.SPECIFICATIONS • Mount 4 hole flange• Flow 160 CFM 41/16˝ x 17/16˝• Voltage 115 AC • Inlet 4¾˝• Amperage 1.2 amps • Outlet 3¼˝ x 3¼˝• Speed 1500 RPM • Size 7⅞˝ x 7¼˝ x 8¾˝• Duty continuous • Shpg. 8 lbs.

Pump FrameITEM 1-4942$29.99• New, HYPRO steelprotective pumpframe. Use to mount enginedriven transfer pumps or other equipment.Provides protection from tipping over. In-cludes mounting platform for engine and 4rubber feet.SPECIFICATIONS• Frame 1˝ steel tubing • Color Black• Mount platform holes 3⅛˝ x 6⅜˝• Interior size 15¼˝ x 19¼˝ x 13½˝• Exterior size 17¼˝ x 21¼˝ x 16½˝• Actual weight 11 lbs. • Shpg. 48 lbs. (oversize)

Air ConditionerFor ElectricalEnclosure

ITEM 1-5026$199.95• New, takeoffs MCLEAN ENGINEERINGModel T20-0226-G169. Due to an engi-neering change these were removed fromunsold enclosures. Contains heating circuitalso. Uses R134 refrigerant.SPECIFICATIONS• Voltage 230 Volt AC • Amps• BTU rating cooling 3.4cooling 1800/2000 heating 2.2heating 1700 • Size 10˝ x 10˝ x 20˝

• Thermostat range 50-95° F • Shpg. 60 lbs.

8 Ton, 18.9˝ StrokeHigh LiftPneumaticPoweredJack

ITEM 9-8741$109.95• Brand new, ALLTRADE high lift ram jack.Operate with compressed air or manualjack handle. 4 ft. air hose with control valveand quick coupler. Clevis on base end withpin hole on rod end for high lift applications.SPECIFICATIONS • Clevis inside width 13/16˝• Capacity 8 ton • Pin size ⅝˝• Air pressure 110-120 PSI • Handle strokes per• Stroke 18.9˝ inch to extend 12• Ram 1.4˝ dia. • Handle lgth. 19¾˝• Retracted lgth. 24.5˝ • Shpg. 38 lbs.2˝ Hypro Polypropylene

TransferPump

With Briggs & Stratton 550 Engine

ITEM 2-1440 $199.95• New, HYPRO 1542P-550BSP Self-prim-ing polypropylene centrifugal pump to pro-vide high-capacity liquid transfer. Use fortransferring water, liquid fertilizers and her-bicides including Roundup and Atrazineand other chemicals compatible withpump materials. Self-priming also makesit ideal for lawn and garden watering, tankfilling and flood water removal when usedwith a strainer and foot valve (not in-cluded). Nylon impeller can handle solidparticles in suspension up to 3/8˝ diameter.EPDM mechanical seal and inlet valve.SPECIFICATIONS• Engine Briggs & Stratton • Max. suction lift 25 ft.• Ports 2˝ NPT • Overall size 19˝ x 15˝ x 13˝• Max head 134 ft. (58 PSI) • Shpg. 54 lbs.• Pump performance:150 GPM at 0 ft. head (0 PSI)150 GPM at 58 ft. head (25 PSI)65 GPM at 115 ft. head (50 PSI)

800-488-3407 Index 3&

Buying and SellingIndustrial Surplus Since 1933

What is the Surplus Center?• We buy top quality products from overstocks, design changes and bank-ruptcies in order to pass great savings on to our customers. We buy clean,new items because we know how important product reliability is to ourcustomers. In addition to our surplus items, we also stock products frommajor manufacturers to keep the products that you need on hand.

All of our products fit into these product classifications:• Brand new – New products that we buy directly from the manufacturerand keep in stock. These items include the manufacturer’s warranty.• New – Excess inventory that is new and unused. Quantities of surplusitems are limited; once we sell out we cannot order more. We support theseitems with a 90 day warranty.• New Takeoffs – Removed from UNUSED machinery. We support theseitems with a 90 day warranty.• Used – Equipment that was in use before we bought it. Applies to onlya few of our products. We support these items with a 90 day warranty.• All of our products have a warranty (full warranty details on page 103.)

3 Easy Ways To OrderOnline at

www.surpluscenter.comCall 800-488-3407

24 hours a day, 7 days a week

Fax your order to 877-474-5198We ship via UPS, USPS and Fedex Freight

Find detailed ordering & shipping information on pages 102 & 103

If you’re in the area visit ourshowroom in Lincoln, Nebraska!

• You can see and touch all of the products you find in both our catalogand at our website. Our knowledgeable staff would be glad to help youfind just the right item for your project.

• If you would like to pick up an order here, call or email your order. Pleasenote that orders picked up in Lincoln are subject to Nebraska sales tax.

To save time you may call, fax or email your order before pickup.We’ll have it ready when you get here!

1015 West O Street • Lincoln, NE 68528Phone 402-474-5167 • Fax 402-474-4359

[email protected]: 8-5 Mon.-Fri. 8-Noon Sat.

• It’s easy to get here from any direction. Our warehouse is approx. 1 milefrom Interstate 80. See the map below for details.

Next time you are in the area please stop in.

HSURPLUS CENTER

PRODUCT........................................PAGEAcme Rod (Lead Screws) .....................138Air

Cylinders.............................112 - 113Compressors .......................107 - 109Pressure Switches .................109, 112Tanks...........................107, 109 - 111Valves..................................110 - 114

Automotive ..............................4 - 22, 196Automotive Gauges...............................19Backup Alarms & Cameras ..............16, 19Ball Valves .............................33, 114, 194Bearings .....................................120 - 122Blowers ..................................2, 165 - 169Cab Heaters ..........................................22Cable Ties ...........................................106Capacitors ...........................................177Casters ...................................2, 185 - 192Clutches ................................44, 133, 136Control Cables...............................25, 147Counters......................................106, 172Couplings ...................................139 - 141Drawer Slides......................................105Engines.......................................4 - 7, 196Fans ...........................................165 - 169Fuel Transfer Pumps ...........................8 - 9Gauges.........................................99 - 101Gearboxes ..........................123 - 132, 195Gearmotors

AC................................................157DC......................................161 - 163

Gear Reducers....................123 - 132, 195

PRODUCT........................................PAGEHeaters .........................................22, 169Hydraulic

Cylinders .........................48 - 77, 193Filters,Strainers ........................85 - 87Fittings...............................85, 90 - 98Gauges..................................99 - 101Hose .......................................88 - 89Motors ....................................78 - 83Power Packs ...........................37, 196Power Team 10,000 PSI...........38 - 39Pumps.....................................39 - 47Reservoirs................................84 - 85Quick Couplers ..............................90Valves, Control ................23 - 31, 193Valves, Flow ............................33 - 35Valves, Relief ..................................34Valves, Selector ..............................32Valves, Solenoid ......................31 - 32Valves, Steering ..............................36

Lights........................15 - 18, 21, 177, 194Linear Actuators.........................164 - 165Motors

AC...................................2, 148 - 157Slide Bases ...................................148Controllers....................................160DC ........................21, 158 - 159, 1943 Phase ...............................148 - 150

ORDERING INFORMATION .....102 - 104Phase Converters.................................149Power Supplies....................................172Pressure Gauges...........................99 - 101

PRODUCT........................................PAGEPTO Shafts ..........................................140Pulleys................................132, 142 - 143Pumps

Centrifugal............................116, 118Fuel Transfer................................8 - 9Pressure Washer ...........................117Engine Driven Transfer..............2, 116Roller ...........................................115Submersible .................................119

Rake Teeth ..........................................105Relays.........................................170 - 171Rod Ends .....................................133, 139Roller Chain ........................105, 128, 137Seats.................................10 - 13, 19, 196Shaft Collars........................................139Shafting...............................................138Shaft Mount Reducers................131 - 132SHIPPING INFORMATION .......102 - 103Sprockets ...................................134 - 136Switches.....................................171 - 176Sump Pumps .......................................119Toggle Clamps.......................................22Trailer Jacks ...................................20 - 21Transaxles............................................146U-Joints...............................................138V-Belts .......................................144 - 145Water Pumps..............................115 - 119Wheels....................2, 178 - 184, 192, 196Wireless Controls ................................176

Prices subject to change.Quantities limited to surplus items on hand.

23 HP KohlerCommandV-TwinEngine

ITEM 28-1890 $1049.95• New, KOHLER Command Series V-twinvertical shaft gas engine. Snorkel industrial aircleaner. Aluminum block with cast iron cylin-der liners. Features include 12 volt DC electricstart, pressurized lubrication with filter, elec-tronic ignition, fuel pump, float carburetor, and15 amp alternator. No muffler or fuel tank.SPECIFICATIONS • Start electric• Model CV680-3043 • No fuel tank• Power 23 HP • Shaft 1⅛˝ dia. x 4⅜˝ keyed,• Torque 35.8 ft-lbs tapped 7/16-20• Bore/Stroke 80mm/67mm• Mount 4-bolt on 10˝ B.C.• Disp. 674 cc • Size 17½˝ x 19˝ x 23˝• Speed 3600 RPM • Shpg. 150 lbs.

Truck freight only.

25 HP Kohler CourageVerticalEngine

ITEM 28-1897$649.95• New, KOHLER Courage series, twincylinder, vertical shaft gas engine. Alu-minum block with cast iron cylinder liners.Features include 12 volt DC electric start,pressurized lubrication with filter, elec-tronic ignition, 12 volt fuel shutoff, fuelpump, float carburetor, and 15 amp alter-nator. No fuel tank or muffler.SPECIFICATIONS• Model SV730-0037 • Shaft vertical• Power 25 HP • Shaft 1˝ dia. x 3.16˝ keyed,• Peak torque 44.8 lb./ft. tapped 7/16˝-20• Bore/Stroke 83mm/67mm• Oil capacity 2 quarts• Disp. 725 cc • Mount 4-bolt on 10˝ B.C.• Speed 3600 RPM • Size 18.5˝ x 17.8˝ x 13.4˝• Start electric • Shpg. 125 lbs.

Truck freight only.

25 HP Kohler ConfidantVerticalEngine

ITEM 28-1902 $999.95• New, KOHLER Confidant series, twincylinder, vertical shaft gas engine. Ideal re-placement for Courage and Command se-ries engines. Aluminum block with castiron cylinder liners. Features include inte-gral Cyclonic air filter, 12 volt DC electricstart, electronic ignition, 12 volt fuel shut-off, fuel pump, float carburetor, and 12amp alternator. No fuel tank or muffler.SPECIFICATIONS• Model ZT740-3022 • Shaft 1⅛˝ dia. x 4.3˝• Power 25 HP keyed, tapped 7/16˝-20• Torque 42 ft.lbs. • Oil capacity 2 qt.• Disp. 747 cc • Mount 4-bolt on 10˝ B.C.• Speed 3600 RPM mtg. holes are not tapped• Start electric • Size 18.05˝ x 17.5˝ x 17˝• Shaft vertical • Shpg. 125 lbs.

Truck freight only.

New Arrivals Daily!www.surpluscenter.com

8.75 ft-lbs. Briggs &StrattonEngine

RS

ITEM 28-1888 $144.95• New, Briggs & Stratton vertical shaft en-gine. Heavy flywheel. Fixed speed throttle.Performance muffler with guard. Electricstart with recoil backup. Readystart sys-tem, no choke needed. Fuel fresh cap.SPECIFICATIONS • Start electric/recoil• Model 121S07-2415 • Alternator ½ amp• Displ. 190 cc • Shaft ⅞˝ dia. x 113/16˝• Torque 8.75 ft-lbs. at w/keyway, tapped ⅜-243060 RPM • Mnt. 3 hole, 8˝ bolt circle

• HP (calculated) 5.5 at • Fuel tank 1 quart3600 RPM • Size 12½˝ x 13½˝ x 9½˝

• Speed 3100 +/- 100 RPM • Shpg. 40 lbs.

5.1 HP HondaVerticalEngine

ITEM 28-1881$179.95

• New, HONDA vertical shaft engine withblade brake clutch. Made for CRAFTSMAN22˝ self-propelled mower. Variable speedthrottle. Fuel shutoff valve. Includes 2.3˝ dia.pulley. Blade brake controls not included.SPECIFICATIONS• Model GCV190-LABHH • Start recoil• Displ. 187 cc • Mount 4 hole, 8˝ bolt circle• Torque 8.3 lb-ft at 2500 RPM • Blade bolt holes• HP 5.1 at 3600 RPM M10x1.25, 87mm c/c• Shaft 3.37 OA length • Fuel tank 1 quart20mm dia. x 63mm with • Size 14.4˝ x 13˝ x 11˝dual keys, tapped M10x1.25 • Shpg. 39 lbs.

20 HP Briggs & StrattonVerticalEngine

ITEM 28-1891$439.95• New BRIGGS & STRATTON built forHusqvarna single cylinder vertical engine.Cast iron sleeve. No muffler and fuel tank.Fuel filter and pump included. Dual 5 and3 amp alternator.SPECIFICATIONS • Shaft 1˝ dia. x 3.16˝• Model 33M677-1594-G5 tapped 7/16-20• Power 20 HP • Mount 10˝ bolt circle• Disp. 540 cc • No fuel tank• Start electric • Size 16½˝ x 18˝ x 13˝• Shaft orientation vertical • Shpg. 75 lbs.

Briggs & Stratton6.5 ft-lbs.

ITEM 28-1770$89.95

• New, BRIGGS & STRATTON verticalshaft engine. Snowblower applications, noair cleaner. Fixed speed governor. Specialheavy flywheel. Manual choke.SPECIFICATIONS • Shaft ¾˝ dia. x 2.43˝• Model 120502-0255-E1 w/keyway, tapped 5/16-20• Power 6.5 ft-lbs. torque • Mount 3 hole, 8˝ B.C.• Displacement 190 cc • Fuel tank 1 quart• Speed 3100 RPM • Size 14˝ x 11˝ x 9¾˝• Start recoil • Shpg. 35 lbs.

22 HP Kohler CourageVerticalEngine

ITEM 28-1884$565.45• New, KOHLER Courage series, twincylinder, vertical shaft gas engine. Alu-minum block with cast iron cylinder liners.Features include 12 volt DC electric start,pressurized lubrication with filter, elec-tronic ignition, 12 volt fuel shutoff, fuelpump, float carburetor, and 15 amp alter-nator. No fuel tank or muffler.SPECIFICATIONS • Shaft 1˝ dia. x 3.16˝ keyed,• Model SV715-3027 tapped 7/16-20• Power 22 HP • Oil capacity 1.8 liter• Disp. 725 cc • Mount 4-bolt on 10˝ B.C.• Speed 3600 RPM • Mtg. holes are not tapped• Start electric • Size 18.6˝ x 17.8˝ x 13.5˝• Shaft vertical • Shpg. 110 lbs.

Truck freight only.

3 HP Vertical ShaftEngine RSITEM 28-1822$79.95

• New, DUCAR vertical shaft overheadvalve engine. Fixed throttle. Primer bulb.No compliance safety stop system. Not forsale in California.SPECIFICATIONS• HP 3 at 3600 RPM • Shaft ⅞˝ dia. x 1⅞˝• Displacement 140 cc w/keyway, tapped ⅜-24• Torque • Mount 3 hole, 8˝ B.C.4.4 ft-lbs. at 3000 RPM • Fuel tank 1 quart

• Speed 2850 RPM • Size 15˝ x 13˝ x 10˝• Start recoil • Shpg. 33 lbs.

4 Vertical Shaft Engines www.surpluscenter.com8

10 HP TecumsehEngine

ITEM 28-1741$139.95

• New, TECUMSEH horizontal engine builtfor driving electric generators. Cast ironsleeve, fixed speed governor. Low oil shut-down. Lighted on/off switch. Not for saleor use in California.SPECIFICATIONS • Shaft 1⅜˝ dia. x 1⅛˝,• Model LH358XA-15493 stepped to ⅞˝ dia. x 1⅞˝• Power 10 HP then tapered• Speed 3600 RPM Overall length 4.33˝• Disp. 358 cc tapped 5/16-24 no keyway• Start recoil • Mount 3¼˝ x 6⅜˝• Shaft horizontal • Accessory mount• No fuel tank 4 bolt on 3⅝˝ B.C.• Size 12˝ x 13½˝ x 13˝ • Shpg. 60 lbs.

800-488-3407 Horizontal Shaft Engines 5&

8 HP Briggs & StrattonIntek

Engine

ITEM 28-1785$249.99

• New, BRIGGS & STRATTON Intek over-head valve horizontal shaft gas engine.Features manual choke, on/off switch, fuelshutoff valve.SPECIFICATIONS • Shaft horizontal• Model 150212-0119-E9 • Shaft ¾˝ dia. x 25/16˝• Power 8 HP w/keyway• Bore/Stroke 2.97˝/2.20˝ • Mount 3⅛˝ x 6⅜˝• Disp. 250 cc. • Accessory mnt. 3⅝˝ B.C.• Speed 3600 RPM • Fuel tank 1.6 qt.• Torque 11.50 ft-lbs. • Size 16½˝ x 12¼˝ x 16¼˝• Start recoil • Shpg. 40 lbs.

11.7 HP HondaRecoilStart

Engine

ITEM 28-1889 $569.99• New, HONDA GX390 horizontal shaft en-gine. Features overhead valves, cast ironsleeve liner, mechanical governor, low-oilsensor, and electronic ignition. Meets EPAand CARB emission regulations for all states.SPECIFICATIONS• Model GX390OUT2-QAA2 • Shaft 1˝ dia. x 321/32˝ keyed,• Power 11.7 HP tapped 3/8˝-24 UNF• Torque 19.5 ft-lbs • Base mount four hole on• Bore/Stroke 88mmx64mm 4˝ x 711/16˝ centers• Disp. 390cc • Accessory mount• Speed 3600 RPM Inner 4 bolt on 5˝ B.C.• Start recoil Outer 4 bolt on 6.5˝ B.C.• Fuel tank 1.6 gallon • Size 15⅞˝ x 17¾˝ x 177/16˝• Shaft horizontal • Shpg. 79 lbs. Briggs & Stratton

21 TorqueEngine

ITEM 28-1901$399.95

• New BRIGGS & STRATTON Model26T232-0118-F1 horizontal crankshaft en-gine. Features cast iron cylinder sleeve,dual ball bearings. Manual choke andthrottle. Steel muffler guard.SPECIFICATIONS • Shaft 1˝ dia. x 331/64˝• Model 26T232-0118-F1 w/¼˝ keyway, tapped 7/16-24• Power 21 ft-lbs. torque • Base mount 7⅝˝ x 4½˝• HP 14.4 HP calculated • Accessory mount 6½˝• Displ. 420 cc. bolt circle with 5¾˝ pilot• Speed 3600 RPM • Fuel tank 6.6 liter• Start recoil • Size 18˝ x 14½˝ x 19˝• Shaft horizontal • Shpg. 78 lbs.

10 HP RecoilStart

Engine

ITEM 28-1864$299.95

• New, BRIGGS & STRATTON Vanguardcommercial series engine. Features in-clude Dura-Bore cast iron cylinder sleeve,float carburetor, electronic ignition, low oilshutdown, overhead valves. Dual-Clean aircleaner, TransportGuard fuel shut off. EPAcompliant for all 50 states.SPECIFICATIONS• Model 19L2320111F1AR1032• Shaft 1˝ dia. x 321/32˝• Power 10 HP w/keyway tapped 7/16˝-20• Bore/Stroke 3.12˝ x 2.44˝ • Accessory mount 4 Bolt• Disp. 18.61 cu. in (305 cc) 3⅝˝, 5˝ and 6½˝ B.C.• Speed 3600 RPM • Fuel tank 3.8 qt. (3.6L)• Start recoil • Size 12½˝ x 167/16˝ x 16˝• Shaft horizontal • Shpg. 75 lbs.

22 HP Robin SubaruEngine

ITEM 28-1872 $1099.95• New, Robin Subaru v-twin cylinder over-head valve engine. Electric start with 15amp alternator. No air cleaner, fuel tank ormuffler. Includes oil cooler and fuel pump.SPECIFICATIONS• Model EH650DB8010 • Shaft 1˝ dia. x 2.9˝• Power 22 HP at 3600 RPM w/¼˝ keyway• Torque 33.6 ft.lbs. tapped ⅜-24UNFmax. at 2500 RPM • Carburetor inlet

• Bore/Stroke 80mm x 65mm 2˝ ID hose barb• Disp. 653 cc. • Mount 7.68˝ x 4.02˝/4.65˝• Speed 3600 RPM • Accessory mount 4 bolt• Start electric 5˝ B.C., 6.5˝ B.C., 7.75˝ B.C.• Shaft horizontal • Size 17˝ x 13½˝ x 19˝• Actual weight 95 lbs. • Shpg. 145 lbs. (oversize)

Special handling requires truck freight only.

25 HP RobinSubaruEngine

ITEM 28-1703 $1449.95• New, ROBIN SUBARU twin cylinder over-head valve horizontal engine. Electric startwith 15 amp alternator. No fuel tank or muf-fler. Includes oil cooler and fuel pump.SPECIFICATIONS• Model EH722DS • Shaft 1⅛˝ dia. x 4˝• Power 25 HP w/keyway• Bore/Stroke 3.31˝ x 2.56˝ • Mount 7.68˝ x 4.02˝/4.65˝• Disp. 720 cc. • Accessory mount 4 bolt• Speed 3600 RPM 5˝ B.C., 6.5˝ B.C., 7.75˝ B.C.• Start key • Size 17˝ x 13½˝ x 19˝• Shaft horizontal • Shpg. 145 lbs.


23 HP VanguardEngine

ITEM 28-1712$1449.99

• New, BRIGGS AND STRATTON Van -guard V-twin horizontal crankshaft engine.Supplied with fuel pump. No fuel tank ormuffler. Pressurized lubrication systemwith oil filter and cooler. 16 amp alternator.Cast iron cylinder sleeve, low oil alert, floatstyle carburetor. Keyswitch on front.SPECIFICATIONS • Shaft 1˝ dia. x 229/32˝• Model 386447-0079 w/ ¼˝ keyway, tapped ⅜-24• Power 23 HP • Mount 7.68˝ x 4.02˝• Bore/Stroke 2.97˝ x 2.76˝ • Accessory mount 5˝ B.C.,• Disp. 627 cc. 6.5˝ B.C., 7.75˝ B.C.• Speed 3600 RPM • No fuel tank• Start electric • Size 16.1˝ x 12.3˝ x 17.7˝• Shaft horizontal • Shpg. 150 lbs.

Truck freight only.

SubaruMuffler

ITEM 28-1873$39.95• New, muffler for SUBARU EH65 andEH72 horizontal shaft engines. Single out-let. Does not include gaskets or nuts.SPECIFICATIONS• Exhaust flanges 2 holes • Outlet 1½˝ OD2⅛˝ center/center • Size 4˝ dia. x 14˝

• Ctr. port to ctr. port 11˝ • Shpg. 16 lbs.

6.5 HP Briggs & StrattonRecoilStart

ITEM 28-1849$269.99• Brand new, BRIGGS & STRATTON Van-guard commercial series engine. Featuresinclude Dura-Bore cast iron cylinder sleeve,float carburetor for consistent easy starting,maintenance-free electronic ignition, low oilshutdown, overhead valves for cooler oper-ation, Dual-Clean air cleaner, compressionrelease for easy starting, engine mountedcontrols and TransportGuard fuel shut off toprevent fuel from diluting oil during trans-port. EPA compliant for all 50 states.SPECIFICATIONS• Model 13L332-0036-F8 • Shaft ¾˝ dia. x 227/64˝• Power 6.5 HP w/keyway tapped 5/16-24• Bore/Stroke 2.69˝ x 2.20˝ • Accessory mount• Disp. 12.51 cu. in (205 cc) 4 Bolt 3⅝˝ B.C.• Speed 3600 RPM • Fuel tank 3.5 qt. (3.3L)• Start recoil • Size 10⅞˝ x 15¼˝ x 14¼˝• Shaft horizontal • Shpg. 48 lbs.

6.5 HP HondaRecoilStart

Engine

ITEM 28-1692$349.99

• New, HONDA GX Series horizontal shaftengine. Features overhead valves, castiron sleeve liner, mechanical governor, low-oil sensor, and electronic ignition. MeetsEPA and CARB emission regulations for allstates.SPECIFICATIONS • Shaft ¾˝ dia. x 27/16˝ keyed,• Model GX200UT tapped 5/16-24 UNF• Power 6.5 HP • Base mount 4 hole• Bore/Stroke 2.7˝/2.1˝ on 3˝ x 6⅜˝ centers• Disp. 12.0 cu. inch • Accessory mount• Speed 3600 RPM 4 bolt on 3⅝˝ B.C.• Torque 9.1 ft-lbs • Fuel tank 3.3 quarts• Start recoil • Size 12⅝˝ x 14⅞˝ x 13¼˝• Shaft horizontal • Shpg. 46 lbs.

6 Horizontal Shaft Engines www.surpluscenter.com89.00 Torque

RecoilStart

ITEM 28-1862$199.95

• New, BRIGGS & STRATTON 900 Seriesengine. Features include Dura-Bore castiron cylinder sleeve, electronic ignition,overhead valves. Dual-Clean air cleaner,engine mounted controls, compression re-lease, accessory mount and fuel shut off.EPA compliant for all 50 states.SPECIFICATIONS• Model 12S4320128F8 • Shaft horizontal• Torque 9 ft-lbs. • Shaft ¾˝ dia. x 227/64˝• Power (calculated) w/keyway tapped 5/16-245.8 HP at 3600 RPM • Accessory mount

• Bore/Stroke 3.125˝ x 2.32˝ 4 Bolt 3⅝˝ B.C.• Disp. 12.51 cu. in (205 cc)• Fuel tank 3 qt.• Speed 3600 RPM • Size 9¾˝ x 14½˝ x 16˝• Start recoil • Shpg. 40 lbs.

6 HP SubaruGo-CartEngine

ITEM 28-1846$229.95

• New, SUBARU Model SP-170 horizontalshaft engine. Spring loaded throttle, chokelever and fuel shutoff. Chain driven overheadcam design, dual ball bearing crankshaft.Cast iron cylinder sleeve. Ducted airflow andcooling fins for long life. Wire muffler cage.SPECIFICATIONS• Model 170DT1030 • Shaft ¾˝ dia. x 2.3˝• Power 6 HP w/3/16˝ keyway• Bore/Stroke 67mm x 48mm • Mount 4 holes,• Disp. 169 cc. 6⅜˝ x 3⅛˝• Speed 3600 RPM • Accessory mount• Start recoil 4 holes, 3⅝˝ B.C.• Shaft horizontal • Size 13.94˝ x 9.67˝ x 13.19˝• Fuel tank 0.85 gallons • Shpg. 42 lbs.

6.5 HP RecoilStartWith 6:1 GearReduction

ITEM 28-1853$329.95• New, BRIGGS & STRATTON Vanguard com-mercial series engine. External 6:1 gear reduc-tion. Features include Dura-Bore cast ironcylinder sleeve, float carburetor for consistenteasy starting, main te nance free electronic ig-nition, low oil shutdown, overhead valves forcooler operation, Dual-Clean air cleaner, com-pression release for easy starting, enginemounted controls and TransportGuard fuelshut off to prevent fuel from diluting oil duringtransport. EPA compliant for all 50 states.SPECIFICATIONS• Model 13L352-0049-F8 • Shaft horizontal• Power 6.5 HP • Shaft ¾˝ dia. x 1⅞˝• Bore/Stroke 2.69˝ x 2.20˝ w/keyway tapped 5/16-24• Disp. 12.51 cu. in (205 cc)• Fuel tank 4.33 qt. (4.1L)• Speed 600 RPM • Size 15½˝ x 13½˝ x 14¼˝• Start recoil • Shpg. 55 lbs.

9.5 TorqueLCT

ITEM 28-1858$119.95• New SnoTek overhead valve engine byLiquid Combustion Technologies. Snow-blower horizontal crankshaft engine withoverhead valves and cast iron cylindersleeve. Manual choke, primer bulb. No aircleaner. Safety keyswitch. Large handle foruse while wearing gloves. Mounting specsmatch Tecumseh OH195 engines. Designedfor use when temperature is below 45°F.SPECIFICATIONS• Model Snotek • Shaft ¾˝ dia. x 2.42˝• Power 9.5 ft.lbs. torque tapped ⅜-24• Disp. 136 cc. • Mount 6⅜˝ x 3⅛˝• Speed 3600 RPM • Accessory mount 3⅝˝ B.C.• Start recoil • Size 15˝ x 10½˝ x 14˝• Fuel tank 2.7 qt. • Shpg. 38 lbs.

6.5 HP PowerProRecoilStart

Engine

ITEM 28-1898 $159.95• New, PowerPro series horizontal shaftengine. Features include overhead valves,cast iron sleeve liner, mechanical governor,dual element air filter, low-oil sensor, andelectronic ignition. CARB/EPA certified foremission standards. Special crankshaftcommonly used for centrifugal pumps.SPECIFICATIONS • Shaft ⅝˝ dia. x 25/16˝• Model 2541-0046 w/⅝-18 thread on• Power 6.5 HP last 1˝ (no keyway)• Bore/Stroke 2.7˝ x 2.1˝ • Accessory mount• Disp. 12 cu. inch 4 Bolt 3⅝˝ B.C.• Speed 3600 RPM • Fuel tank 3.88 qt.• Start recoil • Size 14⅞˝ x 12⅜˝ x 13¼˝• Shaft horizontal • Shpg. 46 lbs.

Briggs & Stratton900 Series

Enginewith

6:1 Reduction

ITEM 28-1859$249.95

• New, BRIGGS & STRATTON INTEK 900Series engine. Features include Dura-Borecast iron cylinder sleeve, electronic igni-tion, overhead valves. Dual-Clean aircleaner, engine mounted controls, com-pression release, and fuel shut off. EPAcompliant for all 50 states.SPECIFICATIONS• Model 122052-0186-B8 • Output speed 600 RPM• Torque 9 ft-lbs. • Start recoil• Power (calculated) • Shaft horizontal5.8 HP at 3600 RPM • Shaft ¾˝ dia. x 2˝ w/keyway

• Bore/Stroke 3.125˝ x 2.32˝• Fuel tank 3 qt.• Disp. 205 cc) • Size 15˝ x 13˝ x 16˝• Gear reduction 6:1 • Shpg. 40 lbs.

6.5 HP PowerProElectricStartEngine

ITEM 28-1898-E$169.95• Same as ITEM 28-1898 above exceptwith 12 volt DC electric start and chargingcircuit.

5.5 GallonFuel Tank

ITEM 28-1876$29.99• New, 5.5 gallon molded fuel tank. De-signed to mount over rear wheel on a com-mercial stand up riding mower. Onevertical and two horizontal 3/4˝ dia. mount-ing holes with metal insert. Shutoff valveon outlet port.SPECIFICATIONS• Capacity 5.5 gallons • Size 30˝ x 12˝ x 24˝• Filler cap 3˝ dia. • Actual weight 13 lbs.• Outlet ¼˝ brass barb. • Shpg. 70 lbs. (Oversize)

200 Watt

ITEM 11-3396$43.45

• Ideal for small engine blocks. Thermo-statically controlled.SPECIFICATIONS• Model 1153 • Heated surface dimension• Voltage 120 VAC 3¾˝ x 2¼˝• Power 200 W • Size 6½˝ x 2¼˝ x 2˝• Cord lgth. 43˝ • Shpg. 1 lb.

300 Watt

ITEM 11-3397$68.05

• Ideal for car and truck engine blocks.SPECIFICATIONS• Model 1160 • Heated surface dimension• Voltage 120 VAC 51/16˝ x 43/16˝• Power 300 W • Size 7˝ x 51/16˝ x 2˝• Cord lgth. 40˝ • Shpg. 1½ lbs.

12 Volt DCAlternators• New, DEUTZ. Manu-factured for Deutz byLetrika (Iskra). Manufac-turer rated 14 volts DCfor charging systems on 12volt vehicles. Voltage regulatormounted on back. Terminals for battery, ex-citation and tachometer. Pulley not fur-nished. Ideal replacement for a variety ofmobile equipment.SPECIFICATIONS • Mount 2 hole 156mm• Voltage 12 VDC (6.142˝) bolt centers• Shaft 17mm (0.669˝) • Size 5⅜˝ x 5⅝˝ x 7⅛˝• Rotation CW • Shpg. 14 lbs.

ITEM 28-1880 $59.95• Model 04124782, amperage 95 amps.

ITEM 28-1883 $69.95• Model 04124784, amperage 120 amps.

208cc Horizontal Engines

• New, ZONG-SHEN horizontalshaft engines.Manual chokeand throttle con-trol. Cast ironcylinder sleeve.

Original application, chipper/shredder.SPECIFICATIONS• Disp. 208 cc. • Accessory mount 4 bolt,• Speed 3600 RPM 3-5/8˝ bolt circle• Shaft horizontal • Fuel tank 3 quarts• Start recoil • Size 18˝ x 10¼˝ x 13½˝• Mount 3⅛˝ x 6⅜˝ • Shpg. 45 lbs.

Recoil StartITEM 28-1893 $99.95SPECIFICATIONS• Model 170-COA • Power 5 HP• Shaft special MTD chipper/shredder25mm dia. x 15/16˝, tapered to ⅞˝ dia. x 1˝w/keyway (2.96˝ OA) tapped ⅜-24

Recoil & 115 Volt AC StartITEM 28-1882 $129.95• With recoil and 115 Volt AC starter. Man-ual choke and throttle control. Original ap-plication, rear tine tiller.SPECIFICATIONS• Model 270-V0 • Shaft ¾˝ dia. x 1¾˝,• Power 5 HP tapped ⅜-24• Start recoil/115 VAC Electric 3⅝˝ bolt circle

2.5 HPPowerPro

Gas EngineITEM 28-1892$129.95

• New PowerPro byHYPRO Model 2549-0042. Overhead valve

design. Rotary shutoff switch. Mechanicalgovernor with control. Manual or remotethrottle. Oil alert system shuts off engine ifoil goes below safe level. EPA and CARBcompliant for use in all states.SPECIFICATIONS • Fuel tank capacity 1.5 qt.• HP 2.5 • Crankshaft• Speed 3600 RPM ½˝ dia. x 1¾˝ w/flat• Torque 2.29 ft.lbs. • Auxiliary mountat 3420 RPM 4 Bolt 3⅝˝ B.C.

• Displacement 79.5 cc • Mount 73/16˝ x 27/16˝• Bore/stroke • Size 10⅝˝ x 10½˝ x 13½˝52mm x 37.4mm • Shpg 24 lbs.

2.5 HP PowerProGas

Engines

• Brand new Pow-erPro. Enginefeatures over-head valves,cast iron sleeveliners, mechanicalgovernor, and au-

tomatic decompres-sion. Oil alert system.SPECIFICATIONS • Shaft ⅝˝ diam. x 27/16˝• 2.5 HP w/keyway• 3600 RPM • 4 bolt 3⅝˝ B.C. auxiliary• Displ. 5.92 cu. in. mount on PTO side• Bore/stroke 2.05˝ x 1.77˝ • Size 9˝ x 10½˝ x 13½˝• Fuel tank capacity 1½ qt. • Shpg. 25 lbs.

ITEM 28-1623 $229.10• EPA and CARB compliant in all states.

ITEM 28-1695 $139.95• EPA compliant. Not for sale in California.

4.5 Gallon Fuel Tankwith

Shut-offValve

ITEM 28-1836-R $24.99• New, steel generator universal fuel tank.Ideal for generator replacement, buildingequipment and other applications. Fea-tures include heavy duty steel constructionwith durable finish, plated twist-on ventedcap and rubber mounts on all four corners.Threaded port on bottom with fuel shut-offvalve.SPECIFICATIONS • Finish color red• Capacity 4.5 gallons • Port size ¼˝ hosebarb• Mount bolt pattern • Filler port 2˝20⅜˝ x 13⅞˝ • Size 21⅜˝ x 14⅞˝ x 6˝• Mount hole size 5/16˝ • Shpg. 12 lbs.

800-488-3407 Horizontal Shaft Engines & Accessories 7&

HondaFuelTank

ITEM 28-1663-A $14.95• New. Painted steel tank. Base mountwith two threaded studs and two tappedholes. Includes filler cap and ¼˝ hosebarbbottom outlet. Large plated steel cap withchain retainer included.• Original equipment on HONDA ModelGX140, GX160 and GX200 engines.SPECIFICATIONS • Filler opening 1⅝˝• Capacity 3.3 quarts • Size 9½˝ x 8¼˝ x 5˝• Fuel port ¼˝ hose barb • Shpg. 5 lbs.

12 VDC ElectronicFuel Pumps

• Brand new, FACETsolid state electronicfuel pumps. Use oncarburetor equippedengines. Works with gas, diesel andblended fuels.SPECIFICATIONS • Ports ⅛˝ NPT female• Voltage 12 Volts DC • Size 3˝ x 3¼˝ x 2⅜˝• Amps 1.6 • Shpg. 2 lbs.

RangeFlow

ITEM Model Pressure (GPH) Price28-1870 40104 1.5-4 PSI 25 $45.9528-1894 * 40102 1.5-4 PSI 25 $47.4528-1895 40106 4-7 PSI 32 $45.9528-1896 40185 9-11.5 PSI 32 $59.95* Same as 28-1870 but includes brass adapters to5⁄16˝ ID hose and mounting hardware.

MagneticEngine Block Heaters

• Brand new, KAT’S MAGNUM HANDI-HEAT magnetic heaters. General applica-tion usage includes hydraulic reservoirs,thawing frozen locks, pipes, gutters andlive stock feeders.

Ordering Information& Shipping Rateson pages 102 - 103

Order Blank on page 104

8 Fuel Transfer Pumps www.surpluscenter.com8

28-1672 28-1673

ITEM 28-1753 $46.85• Brand new, GPI Model RP-5 rotary man-ual fuel pump. Use to transfer diesel,hydrau lic fluid, kero sene and motor oil upto 10 wt. Cast iron housing. Three piecemetal suction pipe with strainer. Not foruse with chemicals.SPECIFICATIONS • Nozzle type ⅞˝ dia. spout• Flow rate 8 gal. at • Hose fitting ¾˝ NPT90 revolutions max. • Suction pipe lgth.

• Rotation CW adjustable up to 39˝ long• Mount 2˝ tank bung • Shpg. 12 lbs.

Fuel / Oil Transfer Hand Pumps• Dual-action, pumps fluid on both push and pull strokes for fast transfer. Designed foruse with gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20%biodiesel blends such as B20), kerosene and oil weights stated below. Includes corro-sion resistant cast aluminum housing, 2˝ NPT male tank mount, anti-siphon valve, self-priming pump and suction pipe.SPECIFICATIONS• Nozzle type open end • Inlet mount 2˝ NPT • Outlet ¾˝ NPT• Nozzle size ¾˝ diam. • Inlet 1˝ NPT • Discharge hose ¾˝ dia. x 8 ft.

GPM Per Dry Prime Oil Wt. HousingITEM Model 100 Strokes Max. Max. Size Shpg. Price28-1672 HP-90 25 3 ft. 10 wt. 6¼˝ x 65/8˝ x 8˝ 14 lbs. $128.7028-1673 HP-100-UL High 50, Low 25 5 ft. 30 wt. 6¾˝ x 9¾˝ x 10˝ 16 lbs. $155.85

ITEM 28-1754 $149.45• Brand new, GPI Model RP-10-UL rotarymanual fuel pump. Transfer diesel, gasoline,hydraulic fluid, kerosene and motor oil up to30 wt. Anti-siphon vent prevents tank siphon-ing. Handle can be padlocked. Aluminumhousing. UL listed hose with static wire andunleaded nozzle. Not for use with chemicals.SPECIFICATIONS • Hose size ¾˝ dia. x 8 ft.• Flow rate 10 gal. at • Hose fitting ¾˝ NPT100 revolutions max. • Suction pipe lgth.

• Rotation CW adjustable up to 40˝ long• Mount 2˝ tank bung • Shpg. 17 lbs.

Rotary Fuel Pumps

GPI Fuel Transfer Pumps• Brand new, GPI fuel transfer pumps. Ideal for vented mobile or fixed location tanks. All GPI products arecompatible with gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blendssuch as B20) and kerosene. All models are self priming pumps with weatherproof housing and UL listedthermally protected motors. 2˝ NPT male tank mount. Operating temperature range -20°F to +125°F.

12 VDC Fuel Transfer PumpsNozzle GPM PSI Nozzle Discharge Duty Inlet Suction

ITEM Model Operation Amps Max. Max. Size Hose Minutes NPT Lift Shpg. Price28-1664 EZ-8 Manual 11 8 15 ¾˝ dia. ⅝˝ dia. x 10 ft. 15 ON / 30 OFF ¾˝ 5.5 ft. max. 18 lbs. $223.8028-1665-A M-150S-AU Auto 18 15 15 ¾˝ dia. ¾˝ dia. x 12 ft. 30 ON / 30 OFF 1˝ 4.8 ft. max. 26 lbs. $355.3528-1665-M M-150S-MU Manual 18 15 15 ¾˝ dia. ¾˝ dia. x 12 ft. 30 ON / 30 OFF 1˝ 4.8 ft. max. 26 lbs. $316.7528-1666-A M-3025-AL Auto 35 25 15 1˝ dia. 1˝ dia. x 12 ft. 30 ON / 30 OFF 1˝ 15 ft. max. 62 lbs. $584.1528-1666-M M-3025-ML Manual 35 25 15 1˝ dia. 1˝ dia. x 12 ft. 30 ON / 30 OFF 1˝ 15 ft. max. 62 lbs. $491.20

115 VAC Fuel Transfer PumpsNozzle GPM PSI Nozzle Discharge Duty Inlet Suction

ITEM Model Operation Amps Max. Max. Size Hose Minutes NPT Lift Shpg. Price28-1667-A M-1115S-AU Auto 1.5 12 15 ¾˝ dia. ¾˝ dia. x 12 ft. 30 ON / 30 OFF 1˝ 4.8 ft. max. 25 lbs. $379.6528-1667-M M-1115S-MU Manual 1.5 12 15 ¾˝ dia. ¾˝ dia. x 12 ft. 30 ON / 30 OFF 1˝ 4.8 ft. max. 25 lbs. $341.0528-1668-A M-3120-AL Auto 4.9 20 50 ¾˝ dia. ¾˝ dia. x 12 ft. 30 ON / 30 OFF 1˝ 15 ft. max. 58 lbs. $526.2528-1668-M M-3120-ML Manual 4.9 20 50 ¾˝ dia. ¾˝ dia. x 12 ft. 30 ON / 30 OFF 1˝ 15 ft. max. 58 lbs. $488.3528-1669-A * M-3130-AL Auto 9.8/4.9 30 50 1˝ dia. 1˝ dia. x 12 ft. 30 ON / 30 OFF 1¼˝ 15 ft. max. 88 lbs. $1034.6028-1669-M * M-3130-ML Manual 9.8/4.9 30 50 1˝ dia. 1˝ dia. x 12 ft. 30 ON / 30 OFF 1¼˝ 15 ft. max. 80 lbs. $939.50* ITEMS 28-1669-A and 28-1669-M are 115/230 VAC

28-1668-M

28-1666-A

28-1664

28-1665-M 28-1667-A 28-1669-A

800-488-3407 Fuel Hand Pumps & Accessories 9&

24 VDC, 1500 WattInverter

ITEM 6-1022 $219.99• New COTEK Model SK1500-124 puresine wave inverter. 91% full load efficiency.Color coded LED indicators for input level,load level and status. On/off rocker switch.DIP switches for frequency (50/60) andpower save mode. Internally protected foroverload, short circuit, reverse polarity,over and under voltage and over tempera-ture. Internal cooling fan.SPECIFICATIONS• Output voltage • Current draw120 Volts AC, two outlets standby 0.15 amps

• Output wattage • No load 0.75 amps1500 Watt continuous • Full load 100 amps

• 1650 Watts max. (using external fuse, not incl.)• 3000 Watts surge • Size 16½˝ x 7½˝ x 3½˝• Input voltage 24 VDC • Shpg 13 lbs.

Heavy Duty 1 GaugeJumperCable SetITEM 11-3408$79.99

• New, heavy duty jumper cable set inplastic carrying case. Use for starting en-gines on trucks, construction equipment.Compatible with top or side terminal bat-teries.SPECIFICATIONS • Amp rating 900 CCA• Length 25 ft. • Size 16˝ x 14˝ x 7˝• Cable size 1 gauge • Shpg. 16 lbs.

5-30 GPMMechanicalFuel Meters

• Brand new GPI fuelmeters. Use on pumpflow systems only. Includes aluminumhousing, nutating disc meter design, fourdigit resettable batch display, seven digitcumulative display, field adjustable fuel cal-ibration, and 90° inlet/ outlet port rotationadapters. Cali brated at the factory fordiesel fuel use.SPECIFICATIONS • Temp. range• Flow range 5-30 GPM -40°F to +130°F• Pressure 50 PSI max. • Size 6½˝ x 5¾˝ x 6½˝• Accuracy +/- 2% • Shpg. 9 lbs.

ITEM 28-1796-75 $150.85• Model MR-530-G6N. Ports ¾˝ NPT.

ITEM 28-1796-100 $150.85• Model MR-530-G8N. Ports 1˝ NPT.

EconomyPail Pump

ITEM 28-1755$28.95• Brand new, GPI ModelCP-5 pail pump. Plungerpump for use with hy-draulic fluid, transmissionfluid, and motor oil. Not foruse with chemicals. PVCbody, valve and seals madeof Hypalon and glass. Slipsinto five gallon pail, no spe-cial tools to install.SPECIFICATIONS • Inlet ½˝ x 13/16˝ hosebarb• Compatible fluids: with ¾˝ NPTHydraulic fluid • Flow rate 8 oz. per strokeTransmission fluid • Nozzle typeMotor oil fluid weight 17½˝ clear tubingup to 90 wt. at 60° F • Shpg. 2 lbs.

3-30 GPMElectronicDigitalFuel MeterITEM 28-1671 $133.00• Brand new GPI Model 01A316M. Use ongravity or pump flow systems. Includesaluminum housing, turbine rotor meter de-sign, four digit LCD display, and cumula-tive or batch totals with batch totalresettable to zero.SPECIFICATIONS • Ports 1˝ NPT• Flow range 3-30 GPM • Port adapter (2)• Pressure 300 PSI max. ¾˝ NPT bushings• Accuracy +/- 2.5% • Size 4˝ x 2˝ x 2½˝• Temp. range +14°F to +130°F• Shpg. 3 lbs.

Fuel Nozzles

$16.95 each• New, FRANKLIN manual utilityfuel nozzles. Buna-N seals. Alu-minum alloy with zinc platedsteel lever.SPECIFICATIONS• Pressure 50 PSI max. • Size 12˝ x 7˝ x 2˝• Tube lgth. 5¾˝ • Shpg. 3 lbs.

13⁄16˝ Discharge for Unleaded GasolineITEM Model Inlet

28-1775-75 402-310-01 ¾˝ NPT15⁄16˝ Discharge for Leaded Gasoline/DieselITEM Model Inlet

28-1772-75 402-300-01 ¾˝ NPT

Tuthill ManualTransfer Pump

ITEM 2-1350 $19.99• New, TUTHILL Series 20hand lever piston pump forpumping fluid into a con-tainer. Poly propylene hous-ing, BUNA N seals.Eco nomical manual trans -fer pump ideal for use onbarrels, drums and storagetanks. Anti-drip nozzle, checkvalve and 360° locking ring. Tele-scoping suction pipe fits up to36˝ high container. Compatiblewith water, gear oils, engine oils, paraffin,fertilizers, mild acids, an ti- freeze, hydraulicoils, diesel, de greasers, herbicides andpesticides. Not for use with gasoline,ethanol or methanol.SPECIFICATIONS• Flow 11 fl. oz. per stroke • Inlet 1˝ NPT• Viscosity SAE 90 max. • Outlet nozzle w/strainer• Bung adapter • Size 9¼˝ x 3½˝ x 12˝2˝ NPS • Shpg. 5 lbs.

10,000 lb. RatchetStrap Hooks

$12.00 each• Brand new, ratchet strap with hooks ateach end. Use to tie down loads on trail-ers, pickup boxes. Plated steel parts. Notfor overhead lifting. Bright yellow nylonstrap.SPECIFICATIONS • Strap width 2˝• Working cap. 10,000 lbs. • Total length 27 ft.• Lashing cap. 3335 lbs. • Shpg. 7 lbs.

ITEM 1-3604-F Flat hook styleITEM 1-3604-J J hook style

800 lb. Strap WinchITEM 3-1032$22.95

• New. BR TOOLS Model HW0800.Mounts almost anywhere. Ratchet holdsload in any position. Zinc plated steelframe. Bright orange nylon strap. 3 mount-ing holes in base.SPECIFICATIONS• Load capacity 800 lbs. • Gear ratio 3:1• Strap 23 ft. of 1mm x 2˝ w.• Size 6½˝ x 4½˝ x 4¾˝nylon strap w/safety hook • Shpg. 5 lbs.

1200 lb. Strap WinchITEM 3-1033$24.95

• New. BR TOOLS Model HW1200S.Mounts almost anywhere. Ratchet holdsload in any position. Zinc plated steelframe. Bright orange nylon strap. 3 mount-ing holes in base.SPECIFICATIONS• Load capacity 1200 lbs. • Gear ratio 4:1• Strap 23 ft. of 1.2mm x 2˝ w.• Overall size 7˝ x 5˝ x 6˝nylon strap w/safety hook • Shpg. 8 lbs.

BoatSpeedometer

ITEM 28-1259$9.95• New, STEWART WARNER Model598BTJ4. Marine speedometer with 3¼˝black face reads 10-60 mph and 20-97km/h. Hosebarb for pilot tube connection.Mounts in 3⅜˝ hole. ⅝˝ diam. hole in backfor illumination bulb (not incl.). 1⅜˝ deepbehind panel. Shpg. 2 lbs.

10 Seats www.surpluscenter.com8

Universal UtilitySeatWith Suspension

ITEM 1-3545$177.95• Brand new, SEAT SOLUTIONS Model51200BK steel framed vinyl covered cush-ion utility seat. ideal replacement for utilitytractors, industrial tractors and other spe-cialty mobile equipment. Sliding base. Ad-justable weight suspension.SPECIFICATIONS • Size 19¾˝ x 195/16˝ x 23¼˝• Universal bolt pattern • Shpg. 43 lbs.

Skid Steer ZTR Fold-DownSeatWith Armrests &Lumbar Support

ITEM 1-3752$206.30

• Brand new, SEAT SOLUTIONS Model44002BK steel frame and black heavy dutyvinyl cover, ZTR or skid steer seat. 3 posi-tion lumbar support. Adjustable tilt backcan be reclined or folded down. Lever con-trols seat to slide forward and backwards.Adjustable arm rests.SPECIFICATIONS• Mounting bolt pattern (width x depth)Adjustable width 7˝ to 13.5˝Slotted slides allow for variable depth spacingMaximum depth 13˝

• Size 24˝ x 20˝ x 26˝• Actual weight 42 lbs. • Shpg. 72 lbs. (oversize)

Deluxe HighBack Seatw/Suspension &Armrest

ITEM 1-3548$380.65• Brand new, SEAT SOLUTIONS Model33001BK steel pan with vinyl backed fabriccushion. Swivel base for easy entry and exitof operator position. Adjustable back restand arm rests. Back rest folds flat. Suspen-sion with weight adjustment and 3 positionheight adjustment. Seat slides. Ideal re-placement for loaders, backhoes, construc-tion equipment, street maintenance, utilitytractors, combines, cotton pickers,sprayers, forage harvester, hay cuber andother specialty industrial tractors.SPECIFICATIONS• Bolt pattern (width x depth)10¼˝ x 10½˝ 10¼˝ x 11˝10¼˝ x 11½˝ 10¼˝ x 12¾˝• Size 25˝ x 24˝ x 34˝ • Shpg. 96 lbs.


High Back SeatWith IntegratedSuspension

ITEM 1-3207$279.95• Brand new, SEAT SOLUTIONS Model36000BK steel frame and black vinyl coverreplacement universal high back seat. Inte-grated suspension for low profile. Texturedseat cushion for air flow. Lever controls seatto slide forward and backwards. Arm rest.Intended for utility trucks, fork lifts, skidsteers and other construction equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)width 11¼˝slotted slides allow for depth spacing of 1˝ to 11¼˝maximum depth 11¼˝• Size 23˝ x 23¼˝ x 24˝ • Shpg. 68 lbs.

Universal2 PieceImplementSeat

ITEM 1-3205$86.55• Brand new, SEAT SOLUTIONS Model34000BK steel frame and black vinyl coverreplacement universal high back seat.Ribbed seat cushion for air flow. Lever con-trols seat to slide forward and backwards.Intended for utility trucks, fork lifts, skidsteers and other construction equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)45/16˝ diam. bolt holes • Size 19¾˝ x 18⅜˝ x 18¾˝adj. width 5½˝ to 15⅛˝ • Actual weight 26 lbs.depth 11˝ • Shpg. 44 lbs. (oversize)

HighBackSeat

ITEM 1-3208$226.95• Brand new, SEAT SOLUTIONS Model44000BK steel frame and black water resist-ant Cordura® fabric cover replacement uni-versal high back seat. Three position lumbarsupport. Adjustable armrests and upperbackrest. Backrest folds forward and reclinesbackwards. Document pouch. Lever controlsseat to slide forward and backwards. In-tended for utility trucks, fork lifts, skid steersand other construction equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)adjustable width 7˝ to 13½˝slotted slides allow for depth spacing of 1˝ to 13˝maximum depth 13˝• Size 20˝ x 24˝ x 26˝• Actual weight 44 lbs. • Shpg. 53 lbs. (oversize)

Universal 2 PieceTractorSeatWith AdjustableSuspension

• Brand new, SEAT SOLUTIONS steel frameand vinyl cover replacement universal highback seat. Adjustable weight suspension with3½˝ stroke. Ribbed seat cushion for air flow.Adjustable base angle. Lever controls seat toslide forward and backwards. Intended forutility, specialty, industrial tractors, equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)depth universal bolt pattern mounting plate• Size 20¾˝ x 23⅝˝ x 20½˝ • Shpg. 44 lbs.

ITEM 1-3213-BK $88.95• Model 51000BK03UN. Black vinyl.

ITEM 1-3213-BL $88.95• Model 51000BL03UN. Blue vinyl.

ITEM 1-3213-YE $88.95• Model 51000YE03UN. Yellow vinyl.

Universal Fold-DownImplementSeat

ITEM 1-3206$104.00• Brand new, SEAT SOLUTIONS Model35500BK steel frame and black vinyl coverreplacement universal high back seat.Fold-down back cushion. Textured seatcushion for air flow. Lever controls seat toslide forward and backwards. Arm rest. In-tended for utility trucks, fork lifts, skidsteers and other construction equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)adjustable width 5½˝ to 15⅛˝slotted slides allow for depth spacing of 1˝ to 11¼˝maximum depth 11¼˝• Size 21¼˝ x 23˝ x 18½˝• Actual weight 36 lbs. • Shpg. 40 lbs. (oversize)

Universal2 PieceImplementSeatITEM 1-3212$72.95• Brand new, SEAT SOLUTIONS Model50800BK steel frame and black vinyl coverreplacement universal high back seat.Ribbed seat cushion for air flow. Lever con-trols seat to slide forward and backwards.Intended for utility trucks, fork lifts, skidsteers and other construction equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)adjustable width 7½˝ to 13˝depth 11½˝• Size 19¾˝ x 19½˝ x 16½˝• Actual weight 28 lbs. • Shpg. 36 lbs. (oversize)

800-488-3407 Seats 11&

Cub CadetBlackMowerSeat

ITEM 1-4101$69.95• New, riding mower seat. Black nylon fab-ric cushion. Plastic frame with triangularthreaded mount. Cub Cadet logo on seatback.SPECIFICATIONS• Backrest height 13˝ • Size 18˝ x 20˝ x 15˝• Cushion depth 15˝ • Actual weight 12 lbs.• Mounting holes 7½˝ x 8˝ • Shpg. 35 lbs. (oversize)

Dixie ChopperMowerSeat

ITEM 1-4100$119.95• New, riding mower seat. Light gray vinylcushion. Steel frame mounting studs andrails. Dixie Chopper logo on seat back.Lock lever for slide adjustment.SPECIFICATIONS• Backrest height 17˝ • Size 18˝ x 20˝ x 21˝• Cushion depth 15˝ • Actual weight 19 lbs.• Mtg. studs 11˝ x 11¼˝ • Shpg. 56 lbs. (oversize)

Forklift Seatwith IntegratedSuspension

ITEM 1-3933$311.95

• Brand new, SEAT Solutions forklift seatwith integrated suspension. Steel frame,foam filled black contoured vinyl seat withhip restraint and operator presence switch.Backrest tilts up 30° in either direction. Seatslides. Document holder integrated intobackrest. Ideal for forklifts, commercial turf,construction equipment, skid steers, spe-cialty vehicles and utility tractors/vehicles.SPECIFICATIONS • Slots mounting patterns• Mounting Width center 10.68˝, 11˝• Threaded mounting Depth centers 12½˝, 11˝patterns 5/16-18 • Weight adj. 110 to 242 lbs.

• Width center 11¼˝, • Slide adj. range 6˝11˝, 10˝, 9½˝, 8˝ • Size 23.62˝ x 24.41˝ x 22.63

• Depth centers 11˝ • Actual weight 65 lbs.• Suspension stroke 1.6˝ • Shpg. 78 lbs. (oversize)

UniversalPan Seat

ITEM 1-3199$31.95• Brand new, SEAT SOLUTIONS Model10000BK covered black replacement uni-versal pan seat for lawn mowers and gar-den tractors. Three drain holes. Steel frame.SPECIFICATIONS• Mounting two ½˝-13 bolts• Size 16¾˝ x 19˝ x 7˝on 2˝ centers • Shpg. 8 lbs.

Black LawnMower SeatITEM 1-2682$39.95• New. Cushioned black vinyl seat withsheet metal frame. Four bolt mount (twoholes 7⅜˝ B.C. and two 9⅛˝ c/c 3¼˝ be-tween rows). Seating surface measures17½˝ wide x 10½˝ deep. 8˝ backrest height(measured from seat surface to top of back-rest). Size 18½˝ x 16˝ x 9¾˝. Shpg. 11 lbs.

Universal2 PieceImplementSeatITEM 1-3544$72.95• Brand new, SEAT SOLUTIONS Model50800BK steel frame and yellow vinylcover, replacement universal high backseat. Ribbed seat cushion for air flow.Lever controls seat to slide forward andbackwards. Intended for utility trucks, forklifts, skid steers and other constructionequipment.SPECIFICATIONS• Bolt patternAdjustable width 7½˝ to 13˝; Depth 11½˝• Size 19¾˝ x 19½˝ x 16½˝• Actual weight 28 lbs. • Shpg. 36 lbs. (oversize)

ReplacementKubotaSeat

ITEM 1-3528$92.00• Brand new, SEAT SOLUTIONS Model53000BK03UN replacement KUBOTAseat. Steel frame heavy duty black vinylcovering on high density foam. Two drainholes in the base of the seat.• Replacement seat for many models ofKubota, Kumiai, Mahindra, Massey Fergu-son, Mitsubishi, Rhino, Satoh, White, Yan-mar.• Specific model numbers can be found atwww.surpluscenter.com.SPECIFICATIONS• Bolt patterns:6˝ x 2˝, 6˝ x 4˝, 7˝ x 1⅝˝, • Size 21½˝ x 17˝ x 18˝7½˝ x 2˝, 7½˝ x 4˝, • Actual weight 14 lbs.7½˝ x 6˝, 7½˝ x 7˝ • Shpg. 35 lbs. (oversize)

YellowMower SeatITEM 1-3709$39.95• New, riding mower seat. Yellow color.Molded vinyl cushion. Plastic base withbrass inserts for bolts.SPECIFICATIONS • Mounting holes 5˝ x 6˝• Backrest height 7˝ • Size 17˝ x 15½˝ x 9˝• Cushion depth 11½˝ • Shpg. 7 lbs.

Pan SeatCushions

1-3209 1-3210 1-3211

• Brand new, SEAT SOLUTIONS seat cushions will fit most pan style seats. Two piececushion. Tie string attachment. Intended for use with our ITEM 1-3199 (at left).ITEM Model Color Cushion Fill Shpg. Price1-3209 50100GR Grey vinyl Poly-foam 2 lbs. $21.951-3210 50200GR Grey vinyl Shredded foam 3 lbs. $21.951-3211 50300RW Red and white vinyl Poly-foam 3 lbs. $24.95

Implement SeatWith Armrest And

Suspension

ITEM 1-4105$219.95

• New cushioned vinyl seat on steel frame.3 position suspension tension adjustment.Seat back angle adjustment knob. Levercontrols seat to slide forward and back-wards. Arm rests. Includes operator pres-ence switch with pigtail.SPECIFICATIONS • 3 holes and 4 slots• Travel 7˝ • Width between armrests 19˝• Mounting rails • Size 23¼˝ x 21˝ x 19½˝• Width 8¼˝ • Actual weight 39 lbs.• Slides 12˝ long • Shpg. 76 lbs. (oversize)

Low BackSeat

ITEM 1-4103$59.99• New, implement seat. Black vinyl overfoam. Polymer frame. Accepts operatorpresence switch.SPECIFICATIONS• Bolt pattern three ⅜-16 • Size 17½˝ x 17½˝ x 15˝tapped holes on • Actual weight 8 lbs.6˝ x 513/16˝ x 513/16˝ ctrs. • Shpg. 35 lbs. (oversize)

12 Seats www.surpluscenter.com8Compact TractorSeatw/Flip Forward Bracket

ITEM 1-3542$69.95• Brand new, SEAT SOLUTIONS Model52010BK compact tractor seat with flipforward bracket. Integral polyurethanesteel frame. Waterproof with drain holes.• Replacement seat for many models ofBolens, Cub Cadet, Ford/New Holland, Hi-nomoto, International Harvester, Iseki,John Deere Utility Orchard Tractors, Kub-ota, Kumiai, Mahindra, Massey Ferguson,Mitsubishi, Rhino, Satoh, White & Yanmar.• Specific model numbers can be found atwww.surpluscenter.com.SPECIFICATIONS• Bolt pattern without flip bracket (width x depth)6½˝ x 1.63˝ 7½˝ x 1.63˝ 7½˝ x 7˝

• Size 17½˝ x 15˝ x 14½˝• Actual weight 12 lbs. • Shpg. 32 lbs. (oversize)

ContouredHigh BackSeatw/ Slides

ITEM 1-3541$103.40• Brand new, SEAT SOLUTIONS Model45000BK high-back contoured seat.Heavy duty vinyl cover. Ideal replacementfor commercial turf, utility vehicles, fork-lifts, skid steers, loaders, backhoes andother construction equipment. Springloaded lever to lock seat slide. Acceptsoperator presence switch.SPECIFICATIONS• Bolt pattern without slides (width x depth)7½˝ x 7˝ 7½˝ x 11½˝ 8˝ x 11½˝8.2˝ x 5˝ 9½˝ x 11½˝ 11¼˝ x 11½˝

• Bolt pattern with slides (width x depth)8˝ x 11⅛˝ 9½˝ x 11⅛˝ 11¼˝ x 11⅛˝


Ultra High BackSeatwith Slides

ITEM 1-3751$142.45• Brand new, SEAT SOLUTIONS Model46000BK high-back seat. Heavy duty vinylcover. Ideal replacement for skid steers.Also for commercial turf, utility vehicles,forklifts, loaders, backhoes and other con-struction equipment. Spring loaded lever tolock seat slide. Steel pan, drain hole. Ac-cepts operator presence switch.SPECIFICATIONS• Bolt pattern9˝ x 11.5˝ 10.25˝ x 11.5˝10.63˝ x 11˝ 11.25˝ x 11.5˝


• Size 22.5˝ x 18.9˝ x 22.5˝• Actual weight 26 lbs. • Shpg. 61 lbs. (oversize)

Implement Seats

• Brand new implement seats. Intended for a wide variety ofapplications including garden tractors, lawn mowers, industrialtrucks, skid steers and forklifts.

Low Back Seats

ITEM Color Material Mounting Bolt pattern (Width X Depth) Size Shpg. Price1-3200 Black Poly 5¼˝ x 4½˝ 6˝ x 5˝ 7½˝ x 7˝ 163/16˝ x 18½˝ x 9⅞˝ 12 lbs. $49.951-3555 Yellow PVC 6˝ x 5˝ 7½˝ x 7˝ 8.2˝ x 5˝ 16½˝ x 18¼˝ x 11˝ 10 lbs. $39.951-3549 Black PVC 6˝ x 5˝ 7½˝ x 7˝ 8.2˝ x 5˝ 16½˝ x 18¼˝ x 11˝ 10 lbs. $39.95

High Back SeatsActual Oversize

ITEM Color Material Mounting Bolt pattern (Width X Depth) Size Weight Shpg. Price1-3201 Black Poly 5¼˝ x 4½˝ 6˝ x 5˝ 7½˝ x 7˝ 1815/16˝ x 1515/16˝ x 14½˝ 12 lbs. 32 lbs. $58.95

1-3202-BK Black Poly 20˝ x 19¾˝ x 14˝ 17 lbs. 33 lbs. $66.15

1-3202-YE Yellow Poly 20˝ x 19¾˝ x 14˝ 17 lbs. 33 lbs. $66.15

1-3203-BK Black Vinyl 207/16˝ x 1731/32˝ x 1815/16˝ 16 lbs. 42 lbs. $121.95

1-3203-YE Yellow Vinyl 207/16˝ x 1731/32˝ x 1815/16˝ 16 lbs. 42 lbs. $121.95

1-3204 * Black Vinyl Universal Slot Pattern 2015/16˝ x 18½˝ x 1815/16˝ 18 lbs. 46 lbs. $76.951-3546 Black PVC 6˝ x 5˝ 7½˝ x 7˝ 8.2˝ x 5˝ 18˝ x 19¼˝ x 13¾˝ 11 lbs. 35 lbs. $51.951-3547 Black Poly 8˝ x 11½˝ 10½˝ x 7¾˝ 11¼˝ x 11½˝ 20⅛˝ x 17½˝ x 19⅛˝ 14 lbs. 47 lbs. $81.95* See website for mounting bolt pattern

6˝ x 5˝ 7½˝ x 3˝ 7½˝ x 7˝8¼˝ x 5˝ 8½˝ x 1⅝˝ 11¼˝ x 11˝6˝ x 5˝ 7½˝ x 3˝ 7½˝ x 7˝8¼˝ x 5˝ 8½˝ x 1⅝˝ 11¼˝ x 11˝7½˝ x 3˝ 7½˝ x 7˝ 8˝ x 11˝8¼˝ x 5˝ 10⅝˝ x 7½˝ 11¼˝ x 11½˝7½˝ x 3˝ 7½˝ x 7˝ 8˝ x 11˝8¼˝ x 5˝ 10⅝˝ x 7½˝ 11¼˝ x 11½˝

1-3200 1-3555 1-3549

1-3201 1-3202 1-3203 1-3204 1-3546 1-3547

800-488-3407 Seats & Accessories 13&

YellowMowerSeat

ITEM 1-4198$29.99• New, riding mower seat. Yellow color.Molded vinyl cushion. Plastic base withmetal inserts for bolts.SPECIFICATIONS• Backrest height 9˝ • Size 18˝ x 18˝ x 12˝• Cushion depth 13˝ • Actual weight 6 lbs.• Mounting holes 4˝ x 7¾˝ • Shpg. 28 lbs. (Oversize)

4 Piece ReplacementCushion SetFor John Deere

ITEM 1-3216$173.95

• Brand new, SEAT SOLUTIONS Model55600YE replacement cushion set for JohnDeere mobile equipment. Steel frame withheavy yellow vinyl cover on high density foam.SPECIFICATIONSFind a complete list online of equipment model numbersthat this cushion fits at www.surpluscenter.com.• Size 21˝ x 24˝ x 21˝ • Shpg. 33 lbs.Seat Slide Pairs

• Brand new, SEAT SOLUTIONS pair ad-justable seat slides. Powder coat painted,Sturdy steel construction. Easily adaptedto many seats.

ITEM 1-3753$35.95

SPECIFICATIONS• Positions 12 • Travel 711/16˝• Bolt pattern universal 11⅝˝ max. depth. C/C• Studs 5/16-18 mount 11˝ C/C width depends on seat• Studs 5/16-18 • Shpg. 4 lbs.

ITEM 1-3550$37.95SPECIFICATIONS• Positions 8 • Travel 5⅝˝• Bolt pattern universal 11⅝˝ max. depth c/c• Bolt hole 5/16˝ diam. • Shpg. 5 lbs.

Universal SeatSlot Bar Set

ITEM 1-3553$31.65• Brand new, SEAT SOLUTIONS Model94500BK seat slot bar pair. Sturdy steelconstruction. Converts many seat bolt pat-terns to widths of 5˝ to 13½˝.SPECIFICATIONS • Size 15˝ x 215/16˝• Bolt hole ⅜˝ diam. • Shpg. 7 lbs.

3 Piece ReplacementCushion SetFor John Deere

ITEM 1-3214$111.95• Brand new, SEAT SOLUTIONS Model55000YE replacement cushion set forJohn Deere mobile equipment. Steel framewith heavy yellow vinyl cover on high den-sity foam. Does not include hardware.SPECIFICATIONSFind a complete list online of equipment model numbersthat this cushion fits at www.surpluscenter.com.• Size 25½˝ x 19˝ x 15¼˝ • Shpg. 21 lbs.

2 Piece ReplacementSeatFor John Deere

ITEM 1-3215$116.95

• Brand new, SEAT SOLUTIONS Model55500YE replacement cushion set for JohnDeere mobile equipment. Steel frame withheavy yellow vinyl cover on high density foam.SPECIFICATIONSFind a complete list online of equipment model numbersthat this cushion fits at www.surpluscenter.com.• Size 23½˝ x 14˝ x 16˝ • Shpg. 16 lbs.

3 Piece ReplacementCushion SetFor InternationalHarvester

ITEM 1-3220$127.95• Brand new, SEAT SOLUTIONS Model556000BW re place ment cushion set for In-ternational Har vester mobile equipment.Steel frame with heavy black and whitevinyl cover on high density foam.SPECIFICATIONSFind a complete list online of equipment model numbersthat this cushion fits at www.surpluscenter.com.• Size 27˝ x 21˝ x 7˝ • Shpg. 24 lbs.

Flip-Type SeatMountingHardwareITEM 1-3809$21.95

• Brand new, hardware for flip-type tractorseats. Use with flip-type seats of the fol-lowing manufacturers: Bolens, Cub Cadet,Deutz/Allis Chalmers, Ford/New Holland,Hinomot, International Harvester, Iseki,John Deere, Kubota, Kamiai, Mahindra,Massey Ferguson, Mitsubishi, Rhino,Satoh, White & Yanmar. Shpg. 3 lbs.Specific model numbers can be found atwww.surpluscenter.com

Heavy Duty SuspensionWith Height &

WeightAdjustment

ITEM 1-3811 $212.95• Brand new, implement seat suspensionsystem with height and weight adjustmentsfor custom comfort. 4-spring suspensionwith hydraulic damper. Fully skirted, pow-der coated steel construction.SPECIFICATIONS • Bolt pattern 10⅝˝ x 11⅝˝• Suspension travel 3¾˝ (top & bottom)• Weight adj. 110 to 286 lbs. • Size 17˝ x 14˝ x 7˝• Height adj. 0˝ to 2⅜˝ • Shpg. 32 lbs.

Low Profile SeatSuspensionWith WeightAdjustment

ITEM 1-3812 $198.95• Brand new, implement seat suspensionsystem with weight adjustments and seatslides for custom comfort. 2-spring sus-pension with hydraulic damper. Fullyskirted, powder coated steel construction.SPECIFICATIONS• Suspension travel 1½˝• Weight adjustment 110 to 265 lbs.• Top bolt pattern (width x length) 10½˝ x slotted slides• Bottom bolt pattern (width x length)10¼˝ x 5¼˝, 6½˝, 8⅝˝, 9⅝˝, 10¾˝, 12˝, 12¾˝

• Size 18˝ x 14½˝ x 4¾˝ • Shpg. 35 lbs.

CushionsFor John Deere

• Brand new, SEAT SOLUTIONS replace-ment back cushion for John Deere mobileequipment. Steel frame with heavy brownfabric cover on high density foam. For usewith mechanical or hydraulic suspension.Adjustable lumbar support.Find a complete list online of equipment model numbersthat these cushions fit at www.surpluscenter.com.

Back CushionITEM 1-3217 $91.95• Model 55700BR. Use with mechanical orhydraulic suspension. Adjustable lumbarsupport. Size 17˝ x 17˝ x 7˝. Shpg. 13 lbs.

Base CushionsITEM 1-3218 $85.45• Model 55800BR. Use with mechanicalsuspension. Size 23˝ x 18˝ x 6˝. Shpg. 14 lbs.

ITEM 1-3219 $84.95• Model 55850BR. Use with hydraulic sus-pension. Size 23˝ x 18˝ x 6˝. Shpg. 14 lbs.

115:12 VACTransformers

• New. Built for use in power supplies of12 volt decorative lighting systems. Allsizes are 115 VAC in, 12 VAC out.

ITEM 15-1076 $4.99• 3 amp cap. 3˝ x 2˝ x 2½˝. Shpg. 3 lbs.

ITEM 15-1077 $7.49• 6 amp cap. 3˝ x 2˝ x 2½˝. Shpg. 3 lbs.

12˝ Quick DisconnectCables

• Brand new, quick disconnect cables. Ideal for ap-plications where correct polarity connections are critical. Colorcoded leads. Sold individually or in packages of 20.SPECIFICATIONS• Length 12˝• Connections 2 pin bullet type

Individual Shpg. 1⁄10 lb. Package of 20 Shpg. 2 lbs.

Wire Gauge ITEM Price ITEM Price18 11-3458-18 $2.30 11-3458-18-20 $37.9516 11-3458-16 $2.65 11-3458-16-20 $42.9514 11-3458-14 $2.95 11-3458-14-20 $47.9512 11-3458-12 $3.15 11-3458-12-20 $59.9510 11-3458-10 $3.45 11-3458-10-20 $64.95

Ammo Box

ITEM 1-3324$19.95• U.S. military surplus ammoboxes. Steel con struc tion withremovable rubber gasketedlid.120mm. Size 12¾˝ x 6¼˝ x31⅞˝. Shpg. 22 lbs.

12.5 KW 120/240 VACGenerator

ITEM 6-1017 $199.99• Removed from service BENDIX CORPO-RATION Part# 51B8-3 AC generator withexternal voltage regulator. Manufacturedfor the military for AC power. Four inch di-ameter air cooling tube. Lug terminal out-put with inputs for external voltageregulator. Regulator included. Wiring dia-gram not available.SPECIFICATIONS • RPM 3600• Power 12 kva • Shaft nominal• Voltage 120/240 VAC 1¼˝ dia. 24T spline• Frequency 60 Hz • Mount 12 hole on• Phase single 10˝ bolt circle• Power factor 0.8-1.0 • Mounting pilot dia. 9˝• Amperage 52.1 amps • Size 16¼˝ x 11˝ x 13˝• Rotation CCW • Shpg. 128 lbs.

14 Miscellaneous www.surpluscenter.com8

Shock/VibrationMount

ITEM 1-4721$3.99• New, BARRY CONTROLS Model C2060-T6. Zinc plated steel mount to absorbshock and vibration. Natural rubber center.Female thread in center.SPECIFICATIONS • Mtg. holes ¼˝ dia.• Load for shock 50-80 lbs. • Mtg. pattern 2½˝ sq.• Load for vibration 150 lbs.• Size 3˝ x 3˝ x 1½˝• Thread size ⅜-16 • Shpg. 1½ lbs.12 Volt Digital

Hourmeter

ITEM 11-3467$9.99• New. DELTA SYSTEMS Model 2014-011.Digital display shows running time ofequipment. Blinking decimal point indi-cates time is being accumulated. Sealedcase has integral connector for Delphi12052644 plug (not included).SPECIFICATIONS• Display 5 digits • Non-resettable• Voltage 12 VDC (9-16 range)• Depth behind panel 1½˝• Snap in mount 1.41˝ x 0.94˝ • Shpg ¼ lb.

4˝ x 26˝ ProgrammableScrolling Sign

ITEM 1-4025 $99.95• New, tri-color message display indoormessage sign. Message characters can bedisplayed in red, green and yellow or anycombination of these. Ideal to promoteyour business, safety messages, employeemessages, promotions and more. Autodisplay mode randomly selects one of theavailable display modes or use scroll dis-play mode for large continuous messages.Program with a computer or includedhand-held IR remote. Features includeprogramming CD discs for Windows 7 orXP, brackets for mounting, RS232 serialdata cable, hand-held IR remote, powersupply and black powder-coat finish alu-minum cabinet.LED DISPLAY FEATURES• 9 fonts available including bold & wide• Up to 41 text in/out display modes• 8 message moving speeds• Pause periods from 0 to 60 seconds• Real time and date formats• Schedule messages to run when needed• Simple graphicsSPECIFICATIONS • Character height 2.1˝• Model RG7-080 AC • Number of characters 16• Voltage 115 AC • Brightness 80 nits• Pitch 0.3˝ • Cabinet size 26˝ x 4˝ x 1½˝• Matrix 7 x 80 • Shpg. 6 lbs.

Pack Of 10Test Leads

• Brand new.Set of test leadswith crimped on alligatorleads. Pack consists of 10 leads 2 of eachcolor, Red, Black, Yellow, Green and White.

ITEM 11-3420-A $4.95SPECIFICATIONS• Overall lgth. 21˝ • Wire gauge 22 AWG• Clip 1˝ Alligator • Shpg. 1 lb.

ITEM 11-3420-B $5.95SPECIFICATIONS• Overall lgth. 25˝ • Wire gauge 20 AWG• Clip 1½˝ Alligator • Shpg. 1 lb.

ITEM 11-3420-C $6.95SPECIFICATIONS• Overall lgth. 24˝ • Wire gauge 20 AWG• Clip 1¾˝ Alligator • Shpg. 1 lb.

116 Link Bicycle Chain• New KAZ bicycle chain. Intended forsilent ride, all season, rough terrain andfast speeds.

ITEM Model Pitch x Width Speed Length Shpg. Price1-3599-1 LR-900 ½˝ x 3/32˝ 24 116 link (58˝) 1½ lbs. $4.951-3599-2 LR-1 ½˝ x ⅛˝ Single 116 link (58˝) 1½ lbs. $4.951-3599-3 LR-600 ½˝ x ⅛˝ Single 116 link (58˝) 1½ lbs. $4.951-3599-4 LR-5 ½˝ x 3/32˝ 24 116 link (58˝) 1 lb. $4.951-3599-5 LR-3 ½˝ x 3/32˝ 9 116 link (58˝) 1½ lbs. $4.95

20 ft. PressureWasher Hosewith Soap Hose

ITEM 20-1494$1.99• New, two attached synthetic hoses madefor use in pressure washers. Does notcome with fittings.SPECIFICATIONS• Main hose: inside dia. ¼˝, outside dia. ½˝• Soap hose: inside dia. ⅛˝, outside dia. ¼˝• Working pressure 800 PSI • Shpg. 3 lbs.

Ordering Information & Shipping Rateson pages 102 - 103


800-488-3407 Mobile Equipment Lights 15&

120 Lumen 12 VDCLED ProjectorLight

ITEM 12-987$23.95• Brand new, BUYERS 5624433 LED pro-jector light. Three high intensity LED’s withclear plastic lens. Mounted to an aluminumheat sink and mounting bracket. Lighthousing can rotate 180°.SPECIFICATIONS • Amps 0.28 amps• Lumens 120 Lumens • Mount two bolt• Voltage 12 VDC on 1½˝ centers• Connection • Size 4¼˝ x 1⅜˝ x 1½˝two 7˝ long wire leads • Shpg. 1 lb.

12 VDC, 24 LED MiniLightBar

With Random Flash Patterns

ITEM 12-993 $119.95• Brand new, BUYERS Model 8891050light bar. 24 amber high-power LED’s. Tworubber covered ceramic magnets. Randomflash pattern. 9½ ft. cord with switch.SPECIFICATIONS • Amps 3.5 amps• Voltage 12 VDC • Connection• Power 42 Watts cigarette plug adapter• Operating temperature • Size 1015/16˝ x 5¾˝ x 37/16˝-40° to 167° F • Shpg. 6 lbs.

12 VDC, 18 LED Mini LightBar

With 19 FlashPatterns

ITEM 12-989 $251.95• Brand new, BUYERS Model 8891090light bar. 18 amber high-power LED’s. Fourrubber covered ceramic magnets. 19 se-lectable flash patterns. 11½ ft. cord withbuilt-in “on-off” and flash pattern selectorswitches. Multi-unit synchronization capa-ble. Meets SAE J845 Class 1, CA Title 13.SPECIFICATIONS • Connection• Voltage 12 VDC cigarette plug adapter• Power 38.4 Watts • Size 16¾˝ x 615/16˝ x 215/16˝• Amps 3.2 amps • Shpg. 9 lbs.

12-24 VDC, 1350 LumensFlood & Spot Lights

• Brand new. BUYERS LED utility lights.Cast aluminum housing with black powdercoat finish. Shock, vibration resistant aswell as waterproof. Clear acrylic lens.Weather resistant switch. 32˝ pre-wiredleads. Handle mounted to top of light forpositioning.SPECIFICATIONS FOR ALL• Voltage 12-24 VDC • High powered LED’s• Power 12 Watts • Lumens 1350• 1 amp at 14 VDC • Shpg. 3 lbs.

With Ball Swivel MountSPECIFICATIONS• Ball swivel joint• LED’s twelve• Lens 6˝ diam.• Mnt. 4 bolt on 25/16˝ x 2¼˝• Size 11⅝˝ x 63/16˝ x 35/16˝

Your Choice

$80.95ITEM 12-985-F Model 1492120 flood lightITEM 12-985-S Model 1492121 spot light

With Two Swivel MountSPECIFICATIONS• Two swivel jointsbase and light

• LED’s six• Lens 5˝ diam.• Mount 2 bolt on 4˝ ctrs.• Size 7⅛˝ x 4½˝ x 8⅞˝

Your Choice

$86.95ITEM 12-986-F Model 1492125 flood lightITEM 12-986-S Model 1492126 spot light

12-24 VDC LED Flood Lights

12-975 12-980 12-980-A 12-980-O 12-990 12-991 12-992 12-999-A12-975-A 12-980-M 12-999-C 12-999-B

• Brand new, BUYERS LED flood lights. Shock, vibration resistant as well as waterproof.

Number of Lens Lens OverallITEM LED’s Lumens Amps Dimension Color Mount Housing Size Shpg. Price12-975 54 375 0.3 5˝ diam. Clear 5/16˝ Stud Sealed Rubber 5˝ x 3.18˝ x 7˝ 2 lbs. $28.9512-975-A 54 375 0.3 5˝ diam. Amber 5/16˝ Stud Sealed Rubber 5˝ x 3.18˝ x 7˝ 2 lbs. $29.9512-980 6 1350 1.5 5˝ diam. Clear M8-1.25 Stud Sealed Aluminum 4.56˝ x 1.69˝ x 5.31˝ 3 lbs. $35.9512-980-A 6 1350 1.5 4¼˝ diam. Amber M8-1.25 Stud Sealed Aluminum 4.56˝ x 1.69˝ x 5.31˝ 2 lbs. $36.9512-980-M * 6 1350 1.5 4¼˝ diam. Clear Magnetic Sealed Aluminum 4.56˝ x 1.69˝ x 5.31˝ 2 lbs. $43.95

* With magnetic base mount. 30 ft. power cord with built in switch and automotive cigarette lighter plug end.

12-980-O 6 1350 1.5 4¼˝ x 1¾˝ Clear M8-1.25 Stud Sealed Aluminum 5.75˝ x 1.75˝ x 5˝ 2 lbs. $39.0012-990 6 1350 1.5 5¼˝ x 35/16˝ Clear ⅜-16 Stud Sealed Aluminum 6˝ x 5˝ x 2˝ 3 lbs. $40.9512-991 9 1500 2.25 5˝ diam. Clear ⅜-16 Stud Sealed Aluminum 5.5˝ x 6.62˝ x 2˝ 3 lbs. $44.9512-992 9 1500 2.25 4¾˝ square Clear ⅜-16 Stud Sealed Aluminum 5.31˝ x 6.75˝ x 1.62˝ 3 lbs. $44.9512-999-A 4 780 1 1⅞˝ diam. Clear M8-1.25 Stud Sealed Aluminum 3.25˝ x 2.75˝ x 2.5˝ 1 lb. $29.9512-999-B 16 3120 3 4⅛˝ square Clear M10-1.5 Stud Sealed Aluminum 7.13˝ x 5˝ x 2.88˝ 3 lbs. $58.9512-999-C 14 2535 3 4½˝ diam. Clear M10-1.5 Stud Sealed Aluminum 7˝ x 4.63˝ x 2.75˝ 3 lbs. $53.95

12 VDC, 24 Amber LEDLightBar8 Flash Patterns

ITEM 12-1024 $98.95• Brand new, BUYERS Model 8891040light bar. 24 amber high-power LED’s. Twoceramic, rubber covered magnets. Eightselectable flash patterns. 9½ ft. cord withbuilt-in “on-off” and flash pattern selectorswitches.SPECIFICATIONS• Voltage 12 VDC • Connection cigarette• Amps 2 amps plug adapter• Size 11˝ x 6½˝ x 2¼˝ • Shpg. 4 lbs.


Pair of 6 LEDStrobeLightHeads

• Brand new, BUYERS dual hidden LEDmini strobe light heads. Intended to bemounted inside of vehicles head and taillights. Six clear LED's per strobe lighthead. 15 ft. hard wired cable with weatherpack connectors to prevent corrosion atconnection. Up to 4 pairs of these strobelight heads can be synchronized for simul-taneous or alternating flashes.SPECIFICATIONS • Amps 1.8 amps/set• 6 LED per head • Mount 2 holes on 1.3˝ ctrs.• 19 flash patterns • Size 1½˝ dia. x 11/16˝• Voltage 12 VDC • Shpg. ¼ lb.

ITEM 12-1029-A Amber $140.95ITEM 12-1029-C Clear $140.95

800 Lumen6 LEDFlood LightITEM 12-1000$29.95• Brand new, CREATIVEWERKS ModelCWLED-006 LED flood light. Terpolymerhousing. Minimal current draw. 33˝ wirelead. 110° of light output. Can be usedwith ITEM 12-1000-RF above.SPECIFICATIONS • Lens 5⅛˝ x 3⅛˝• Voltage 12 VDC • Mount M10-1.5 x 1⅛˝ stud• Amps 0.6 amps • Size 5⅞˝ x 2⅞˝ x 5¾˝• Lumen rating 800 lumens • Shpg. 2 lbs.

800 Lumen 6 LEDFlood LightWith RFRemoteControl

ITEM 12-1000-RF$39.95• Brand new, CREATIVEWERKS ModelCWLED-006RF LED flood light. IntegratedRF receiver allows this light to control upto 5 other non-RF LED lights (ITEM 12-1000 below). Terpolymer housing. Minimalcurrent draw. 33˝ wire lead. 110° of lightoutput. 6 button RF transmitter included.SPECIFICATIONS • Lens 5⅛˝ x 3⅛˝• Voltage 12 VDC • Mount M10-1.5 x 1⅛˝ stud• Amps 0.6 amps • Size 5⅞˝ x 2⅞˝ x 5¾˝• Lumen rating 800 lumens • Shpg. 2 lbs.

16 Vehicle Camera Systems & Lights www.surpluscenter.com8

Camera Cables

• Brand new, connectcamera to monitor. 4 wiresfor positive, negative, videoand audio. Weatherproofthreaded connectors.ITEM Length Shpg. Price11-3316-16 16 ft. 1 lb. $9.6511-3316-32 32 ft. 2 lbs. $16.5011-3316-65 65 ft. 3 lbs. $24.3011-3316-82 82 ft. 4 lbs. $32.40

Single View SystemWith

Camera

ITEM 11-3316 $262.20• Adjustable bracket and rain/sun shadeon camera. 18 LED’s around camera lensto provide night vision. Furnished with 1camera, inputs for 2 additional cameras(purchased separately). View from addi-tional cameras can be set for normal ormirrored image. Automatic camera heatingbelow 14°.SPECIFICATIONS • Monitor size 7˝ x 1˝ x 5˝• Night vision range 5 meters • Camera size 3˝ x 2˝ x 1¾˝• Camera viewing angle 120°• Cable length 65 ft.• Screen format 16:9/4:3 • Shpg. 7 lbs.

Quad View SystemWith Monitor

& Control

ITEM 11-3316-4 $242.25• Visor on screen to assist viewing in day-light. One, two, three or four images onscreen. Changes to rear view when trans-mission shifted to reverse and also goes toappropriate side view based on turn sig-nals. Cameras and cables sold separatelyto fit your exact needs.SPECIFICATIONS • Size 7⅞˝ x 2½˝ x 5½˝• Screen format 16:9 • Shpg. 3 lbs.

RearCamera

ITEM 11-3316-EC $115.00• Adjustable bracket and rain/sun shade.18 LED's around camera lens to providenight vision. Automatic camera heatingbelow 14°.SPECIFICATIONS• Operating voltage 12-24 DC• Night vision range 5 meters • Size 3˝ x 2˝ x 1¾˝• Camera viewing angle 120° • Shpg. 5 lbs.

SphericalCamera

ITEM 11-3316-SC$147.95• Two stud mount in two piece plastichousing. Camera angle can be adjusted inhousing. 9 LED's around camera lens toprovide night vision.SPECIFICATIONS• Camera viewing angle 170° • Size 2¾˝ x 1¾˝ x 2⅛˝• Mounting studs ⅝˝ c/c • Shpg. 1 lb.

BulletCamera

ITEM 11-3316-BC $70.60• Designed to be installed in 26mm hole inbumper or other holes on vehicle body. 9LED's around camera lens to provide nightvision. Includes hole saw blade to cutmounting hole.SPECIFICATIONS • Size 1¼˝ dia. x 1½˝• Camera viewing angle 170° • Shpg. 1 lb.

Side MountCamera

ITEM 11-3316-SMC$128.20• Gasketed plastic housing for side mounton vehicle. 9 LED's around camera lens toprovide night vision.SPECIFICATIONS • Size 1½˝ x 3¼˝ x 2˝• Camera viewing angle 170° • Shpg. 1 lb.

Extra Color Cameras• Brand new, extra color cameras forITEMS 11-3316 and 11-3316-4. Four pinwiring harness. Cable sold separately.

12-24 VDC Vehicle Color Observation Systems• Brand new, color view kit for trucks, buses, RV's, construction equipment. Improvessafety where visibility is restricted. Audio function. Wireless handheld remote control.Multi-language screen display. Cameras and cables sold separately to fit your exactneeds.SPECIFICATIONS• Screen 7˝ color LCD • Resolution 800 x 480 • Contrast 500:1 • Inter-connect cable 80˝

17˝ Triple LensMarker Light Bar

ITEM 12-1015 $12.55• New BUYERS Model 5621719 redmarker light 3 lens with 3 LED’s per lens.Wire leads.SPECIFICATIONS • Mount 4 bolt holes on• Marker light bar 3¾˝ to 12¼˝ to 16˝ ctrs.• 12 VDC • Size 17˝ x 1½˝ x 1¾˝• LED’s 9 red • Shpg. ¾ lb.

6˝ Oval10 LEDLights

• New BLAZER lights. Rubber grommetaround case. 12˝ leads.SPECIFICATIONS FOR BOTH• 12 VDC• Mounts in 6⅞˝ long x 211/16˝ wide x 13/16˝ deep• Size 7⅝˝ x 3⅜˝ x 2¼˝• Shpg. ¾ lb.Amber Turn-Tail Light

ITEM 12-1007-A $12.95SPECIFICATIONS• Model C562CA• Turn-Tail Light• LED’s 10 AmberRed Stop-Turn-Tail Light

ITEM 12-1007-R $12.95SPECIFICATIONS• Model C562CA• Stop-Turn-Tail Light• LED’s 10 Red

800-488-3407 Lights 17&

12 VDC LED Dot Trailer Lights

12-1010-D 12-1010-B 12-1011-C 12-1011-B 12-1011-D 12-1012-B 12-1013-A 12-1014-B• Brand new, BUYERS PRODUCTS 12 VDC LED lights. Rubber grommet around case.

Number Lens Lens Mount Lead OverallITEM of LED’s Dimensions Color Style Opening Lgth. Size Shpg. Price12-1010-C 10 4˝ dia. Amber Turn-Park light 4˝ dia. 12˝ 59/16˝ dia. x 1½˝ ¾ lb. $12.6512-1010-D 10 4˝ dia. Clear Backup light 4˝ dia. 12˝ 59/16˝ dia. x 1½˝ ¾ lb. $24.9512-1010-A 10 4˝ dia. Red Stop-Turn-Tail light 4˝ dia. 12˝ 59/16˝ dia. x 1½˝ ¾ lb. $12.4012-1010-B 18 4˝ dia. Red Stop-Turn-Tail light 4˝ dia. 12˝ 59/16˝ dia. x 1½˝ 1 lb. $14.9012-1011-C 10 6½˝ oval Amber Turn-Park light 6½˝ x 29/16˝ 12˝ 7¼˝ x 3¼˝ x 1⅞˝ ¾ lb. $12.6512-1011-A 10 6½˝ oval Red Stop-Turn-Tail light 6½˝ x 29/16˝ 12˝ 7¼˝ x 3¼˝ x 1⅞˝ ¾ lb. $12.6512-1011-B 20 6½˝ oval Red Stop-Turn-Tail light 6½˝ x 29/16˝ 12˝ 7¼˝ x 3¼˝ x 1⅞˝ 1 lb. $16.9012-1011-D 24 6½˝ oval Clear Backup light 6½˝ x 29/16˝ 12˝ 7¼˝ x 3¼˝ x 1⅞˝ ¾ lb. $29.9512-1012-B 4 2½˝ dia. Amber Marker light 2½˝ dia. 6˝ 311/16˝ dia. x 1⅝˝ ¼ lb. $ 5.4512-1012-A 4 2½˝ dia. Red Marker light 2½˝ dia. 6˝ 311/16˝ dia. x 1⅝˝ ¼ lb. $ 5.4512-1013-B 3 2½˝ x 1½˝ Amber Marker light 6˝ 213/16˝ x 1½˝ x 1¼˝ 1 lb. $ 4.9512-1013-A 3 2½˝ x 1½˝ Red Marker light 6˝ 213/16˝ x 1½˝ x 1¼˝ 1 lb. $ 4.9512-1014-B 3 ¾˝ dia. Amber Marker light ¾˝ dia. 7˝ ¼ lb. $ 5.9512-1014-A 3 ¾˝ dia. Red Marker light ¾˝ dia. 7˝ ¼ lb. $ 5.95

12-24 VDC LED Light Bars• Brand new, BUYERS LED spot light bar.Shock, vibration resistant as well as water-proof. Clear lens. Powder coated aluminumhousing. Two M8-1.25 mounting studs.• Spot Light Bars contain all spot LED, Spot/Flood Light Bars contain one row of spotLED’s and one row of flood LED’s.Spot Light Bars

Number Lens MountITEM LED’s Lumens Amps Dimensions Ctr - Ctr Shpg. Price12-996-12 12 2700 3/1.5 6¾˝ x 3˝ 9⅜˝ 3 lbs. $85.9512-996-18 18 4050 4.5/2.3 10¼˝ x 3˝ 12¾˝ 4 lbs. $109.9512-996-24 24 5400 6/3 13¼˝ x 3˝ 15⅞˝ 5 lbs. $119.95Spot/Flood Light Bars

Number Lens MountITEM LED’s Lumens Amps Dimensions Ctr - Ctr Shpg. Price12-1016-12 12 2400 3/1.5 77/16˝ x 3⅛˝ 11⅝˝ 4 lbs. $100.9512-1016-36 36 8100 9/4.5 22½˝ x 3⅛˝ 26⅛˝ 8 lbs. $193.9512-1016-48 48 10800 12/6 29¾˝ x 3⅛˝ 34˝ 10 lbs. $247.95

12 VDC AmberRotatingLight

ITEM 12-979$16.95• Brand new, BUYERS Model RL650Amagnetic mount revolving emergencylight. Durable plastic Amber lens. Includesreplacement bulb. Stick on cover to helpprevent magnet from scratching mountingsurface paint.SPECIFICATIONS • Mount magnetic base• Voltage 12 VDC • Cord lgth. 10 ft.• Connection • Size 7⅝˝ x 5˝ x 5⅝˝automotive cigarette lighter • Shpg. 2 lbs.

Portable MagneticMountFlashingLightITEM 12-1017$29.95• Brand new, BUYERS Model SL475A LEDpersonal safety flashing light. Extremelyportable, does not require any outsidepower source. Manual on/off or use inter-nal photocell to automatically turn on atnight. Magnetic mount. Operates 300-400hours on 2 D cell batteries. Carrying strap.SPECIFICATIONS • Flash rate• Batteries 2 D cell 60 triple flashes/minute(not included) • Mount 3 magnets

• Lens color Amber • Size 4.75˝ dia. x 4.13˝• Bulb type 24 LED • Shpg. 2 lbs.

12 VDC MagneticMountFlashingLight

ITEM 12-983 $18.95• New, PETERSON MFG Model 773 dualbulb flashing light. Alternates betweenupper and lower bulb to command atten-tion. Magnetic mount with 12 ft. coiledcord to cigarette lighter plug.SPECIFICATIONS • Bulb type #89• Voltage 12 DC • Mount 3 magnets• Lens color amber • Size 4⅝˝ dia. x 5½˝• Flash rate 90/minute • Shpg. 2 lbs.

12 VDC Magnetic MountDual Revolving Light

ITEM 12-1022 $69.99• New, BLAZER INTERNATIONAL ModelC4500AW dual revolving light. Magneticmount with 12 ft. cord to cigarette lighterplug. On/off switch in plug. Polycarbonatelens.SPECIFICATIONS • Flash rate 105/minute• Bulb type H1 55 watt • Mount 4 magnets• Voltage 12 DC • Size 17½˝ x 7¼˝ x 5˝• Lens color amber • Shpg. 6 lbs.

18 Lights www.surpluscenter.com8

12 VDC Recessed MountLED Strobe Lights

• Brand new, BUYERS PRODUCTS recessedmount LED strobe lights. Rubber grommetaround case. Meet SAE J595 class 2 certification.

Number # Flash MountITEM of LED's Color Patterns Opening Overall Size Shpg. Price12-1025-A 24 Amber 6 4˝ dia. 59/16˝ dia. x 1½˝ ¾ lb. $29.9512-1025-C 24 Clear 6 4˝ dia. 59/16˝ dia. x 1½˝ ¾ lb. $37.9512-1026-A 24 Amber 6 6½˝ x 29/16˝ 7¼˝ x 3¼˝ x 1⅞˝ ¾ lb. $29.9512-1026-C 24 Clear 6 6½˝ x 29/16˝ 7¼˝ x 3¼˝ x 1⅞˝ ¾ lb. $37.95

12-1028-A 12-1033-C 12-1035-A 12-1018-A

12-1032-B 12-1027 12-1031-A 12-1034-A

12 VDC Surface Mount LED Strobe Lights

• Brand new, BUYERS PRODUCTS 12 VDC surface mount strobe lights.* Meet SAE J595 Class 1 Certifications** Meet SAE J595 Class 2 Certifications

*** Meet IP67 Standards

Number # FlashITEM of LED's Color Patterns Overall Size Shpg. Price

12-1028-A* 3 Amber 11 2⅝˝ x ⅞˝ x 1˝ ½ lb. $63.9512-1028-C* 3 Clear 11 2⅝˝ x ⅞˝ x 1˝ ½ lb. $63.9512-1033-A** 3 Amber 12 3⅞˝ x 1¾˝ x 1˝ ¼ lb. $32.9512-1033-C** 3 Clear 12 3⅞˝ x 1¾˝ x 1˝ ¼ lb. $32.9512-1035-A** 3 Amber 12 3⅞˝ x 1˝ x ⅝˝ ¼ lb. $53.9512-1035-C** 3 Clear 12 3⅞˝ x 1˝ x ⅝˝ ¼ lb. $53.9512-1018 4 Amber 4 4⅞˝ x 1⅝˝ x 2˝ ¾ lb. $33.9512-1018-A 4 Clear 4 4⅞˝ x 1⅝˝ x 2˝ ¾ lb. $37.9512-1018-B 4 Amber & Clear 4 4⅞˝ x 1⅝˝ x 2˝ ¾ lb. $42.9512-1032-A* 4 Amber 19 4½˝ x 1¾˝ x 1½˝ ¼ lb. $40.9512-1032-B* 4 Amber & Clear 19 4½˝ x 1¾˝ x 1½˝ ¼ lb. $40.9512-1032-C* 4 Clear 19 4½˝ x 1¾˝ x 1½˝ ¼ lb. $40.9512-1027 6 Amber 19 5˝ x 1⅛˝ x ½˝ ¼ lb. $78.9512-1031-A* 12 Amber 23 5¼˝ x 2˝ x ¾˝ ½ lb. $98.9512-1031-C* 12 Clear 23 5¼˝ x 2˝ x ¾˝ ½ lb. $98.9512-1031-D* 12 Amber & Clear 23 5¼˝ x 2˝ x ¾˝ ½ lb. $98.9512-1031-E* 12 Red 23 5¼˝ x 2˝ x ¾˝ ½ lb. $98.9512-1031-F* 12 Blue 23 5¼˝ x 2˝ x ¾˝ ½ lb. $98.9512-1034-A*** 12 Amber 18 5⅜˝ x 2¼˝ x 2˝ ½ lb. $47.9512-1034-B*** 12 Amber & Clear 18 5⅜˝ x 2¼˝ x 2˝ ½ lb. $47.9512-1034-C*** 12 Clear 18 5⅜˝ x 2¼˝ x 2˝ ½ lb. $47.95

12 VDC LED Light Strips• Brand new, BUYERS LED light strip. Ideal for compart-ments, cargo, work spaces of trucks, toolboxes trailers andRV’s. Low profile. IP68 rated, completely sealed waterproof. Self adhesive back and brackets with screws in-cluded. 12 volt DC. Leads 4½˝ long at each end.

ITEM Lgth. # LED’s Amps Lumens Size Shpg. Price12-995-18 18˝ 27 0.41 360 27˝ x ½˝ x ¼˝ ¼ lb. $16.4512-995-24 24˝ 36 0.54 470 33˝ x ½˝ x ¼˝ ¼ lb. $18.9512-995-36 36˝ 54 0.81 710 45˝ x ½˝ x ¼˝ ½ lb. $24.9512-995-48 48˝ 72 1.12 940 57˝ x ½˝ x ¼˝ ½ lb. $32.95

12-1025-A 12-1026-C

5½˝ Off-road HalogenDrivingLightKit

ITEM 12-1021 $29.99• New, PLATINUM BURNERS SERIES byOPTRONICS. Model MH600-D. Kit hastwo 55 watt Halogen driving lights, illumi-nated on/off switch with mounting bracket,wiring harness with fuse. Corrosion proofhousing and chromed lens guards.SPECIFICATIONS • Bulb H3• Voltage 12 Volt DC • Size 5½˝ dia. x 3˝• Wattage 55 per light • Shpg. 4 lbs.

Halogen DrivingLightKit

ITEM 12-1005 $12.99• New, PLATINUM BURNERS SERIES byOPTRONICS. Model QH-16CT. Kit has two55 watt Halogen driving lights, illuminatedon/off switch with mounting bracket,wiring harness with fuse.SPECIFICATIONS• Voltage 12 Volt DC • Size 5¾˝ x 3˝ x 3˝• Wattage 55 per light • Shpg. 2 lbs.

400 Lumen,12 VDCUtility LightITEM 12-974$8.50• Brand new, BUYERS Model 1492100utility light. Weather proof hard rubberhousing. Incandescent bulb. Sealed lamp.Universal adjustable mounting bracket.SPECIFICATIONS • Connection 2 wires• Voltage 12 VDC • Lens 4˝ diameter• Power 35 Watts • Mount 5/16˝ x 9/16˝ stud• Amps 2.92 amps • Size 5˝ x 2¾˝ x 6¼˝• Lumens 400 • Shpg. 2 lbs.

Control LeverWithout RetainingClamp

ITEM 1-3911-A $2.99• New, MAGURA control lever. Use forthrottles, brakes, etc. Die cast body withfiber reinforced plastic lever. Tapped for8mm travel limiting screw (not included).Use with 2mm cables with barrel end.Missing retaining clamp. Retaining clampmounts tapped M6-1.0 on 1.35˝ centers.SPECIFICATIONS • Lever length 160mm• Maximum travel 1˝ (pivot to end)• Mounting 1˝ dia. • Size 7˝ x 2˝ x 3˝• Cable mount 8mm thread • Shpg. 1 lb.

HighBackSeat

ITEM 1-3208-S$159.95

• Removed from retail displays. Seats mayhave small cuts/tears up to ¼˝, scuffedsurfaces, indentations, scratches, may bedusty. Sold AS-IS.• SEAT SOLUTIONS Model 44000BK steelframe and black water resistant Cordura®fabric cover replacement universal high backseat. Three position lumbar support. Ad-justable armrests and upper backrest. Back-rest folds forward and reclines backwards.Document pouch. Lever controls seat to slideforward and backwards. Intended for utilitytrucks, fork lifts, skid steers and other con-struction equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)adjustable width 7˝ to 13½˝slotted slides allow for depth spacing of 1˝ to 13˝maximum depth 13˝• Size 20˝ x 24˝ x 26˝• Actual weight 44 lbs. • Shpg. 53 lbs. (oversize)

800-488-3407 Hourmeters & Seats 19&

12 VDC BatteryChargerMaintainerITEM 11-3377$5.99• New, CUI Model DC150800 class 2 bat-tery charger. LED on cord indicates red for“CHARGING” and green for “CHARGED”.Plastic housing. Two prong input powercord. Cord has 5.5 mm O.D. barrel plug.SPECIFICATIONS• Input 115 VAC • Cord 6 ft. long• Output 15 VDC • Size 2⅛˝ x 2˝ x 2½˝• Current 800 mA output • Shpg. 1½ lbs.

12 VDC Power LockActuatorITEM 11-3346$5.10

• Brand new, Black Widow power doorlock actuator. Use as replacement or forcustom purposes. Rubber bellows on ac-tuator shaft. Powers both directions. In-cludes hardware. Non-load holding toallow manual override of lock plunger.SPECIFICATIONS• Voltage 12 VDC • Mount 2 holes 2¼˝ c/c• Travel 22mm (0.865˝) • Duty intermittent• Force 3Kg (6.6 lbs.) • Size 5½˝ x 13/16˝ x 2⅜˝• Actuator pin hole 3/16˝ • Shpg. 1 lb.

100 PSI OilPressureGaugeITEM 28-1493$6.95• New, SUNPRO Model CP0861. Oil pres-sure gauge includes mounting bracket,plastic tubing, instructions and adapter set.SPECIFICATIONS• Reads 0-100 PSI in • White letters on5 PSI increments black background• Mnt. in 2⅝˝ dia. opening • Chrome bezel• 12 VDC internal lighting • Shpg. 1½ lbs.

12-24 VDC Back-Up Alarms• Brand new, BUYERS back-up alarms. Plastic housing, epoxy sealed from moisture,dust and vibration. Self grounding. Back up alarm should be louder than backgroundnoise of all jobsites vehicle is used at. Meets OSHA, Bureau of Mines, GSA and all stateregulations. Conforms to J994 criteria.• Voltage 12-24 VDC. Mount two ¼˝ holeson side or base. Shpg. ¾ lb.

ITEM Decibels Size Price12-976 97 dB 4¼˝ x 2¾˝ x 2˝ $17.9512-977 102 dB 45/16˝ x 2⅞˝ x 2˝ $19.9512-978 107 dB 43/16˝ x 3⅜˝ x 2˝ $19.95

12 Volt Hourmeters

• Brand new. Shows runningtime of equipment. 12 volt DC(will operate on 10-80 VDC).Non-resettable. Shpg ¼ lb.

ITEM 1-1238 ITEM 1-2506 ITEM 1-2507

Panel Opening AndITEM Front Face Mount Rear Clearance Required Price1-1238 2⅜˝ O.D. Rear Clamp 2˝ dia. x 1¾˝ $19.951-2506 2⅞˝ O.D. 3 holes in flange 2½˝ B.C. 2˝ dia. x 1¾˝ $19.951-2507 2⅛˝ x 1¼˝ 2 holes in flange 1¾˝ c/c 1˝ x 1½˝ x 2⅝˝ $18.75

UniversalPanSeats

• Removed from retail displays. Seats mayhave small cuts/tears, scuffed surfaces, in-dentations, scratches, may be dusty. SoldAS-IS.• Brand new, SEAT SOLUTIONS Model10000BK covered black replacement uni-versal pan seat for lawn mowers and gar-den tractors. Three drain holes. Steel frame.SPECIFICATIONS• Mounting two ½˝-13 bolts• Size 16¾˝ x 19˝ x 7˝on 2˝ centers • Shpg. 8 lbs.

ITEM 1-3199-S $19.95• May have small cuts/tears up to ¼˝.

ITEM 1-3199-S-D $15.95• May have small cuts/tears up to 2˝.

RidingMowerSeatITEM 1-4955$29.95• New, MICHIGAN SEAT COMPANY.Molded in “White Outdoor” logo. Blackvinyl over foam. Polymer frame.SPECIFICATIONS• Mounting four ⅜˝-16 metal inserts on 6˝ x 5˝ pattern• Size 17½˝ x 17½˝ x 11½˝• Actual weight 6 lbs. • Shpg. 24 lbs. (oversize)

ContouredHigh BackSeatwith Slides

ITEM 1-3541-S$61.95• Removed from retail displays. Seats mayhave small cuts/tears up to ¼˝, scuffedsurfaces, indentations, scratches, may bedusty. Sold AS IS.• SEAT SOLUTIONS Model 45000BK high-back contoured seat. Heavy duty vinylcover. Ideal replacement for commercialturf, utility vehicles, forklifts, skid steers,loaders, backhoes and other constructionequipment. Spring loaded lever to lock seatslide. Accepts operator presence switch.SPECIFICATIONS• Bolt pattern without slides (width x depth)7½˝ x 7˝ 7½˝ x 11½˝ 8˝ x 11½˝8.2˝ x 5˝ 9½˝ x 11½˝ 11¼˝ x 11½˝



8000 lb.Trailer Jack

ITEM 28-1612 $46.95• Brand new heavy duty trailerjack. For large high capacity trail-ers. 12 gauge square tubing forextra strength. Powder coatedouter tube and zinc plated innertube for long life. Direct weldmount. Drop leg allows 13½˝ extralength. 3 year mfg. warranty.SPECIFICATIONS• 8000 lb. capacity • 9/16˝ pin for mount• Top-wind w/retainer chain• 15˝ travel • 6˝ x 8˝ foot• 2½˝ square tube body • Shpg. 25 lbs.• Length center of tube mount to base:Retracted 21½˝, Extended 50˝

2000 lb.Trailer Jack

ITEM 1-4822 $23.99• New, BULLDOG trailer jack.Round tubing. Powder coatedouter tube and zinc plated innertube for long life. Swivel mountwith retaining pin allows jack tobe swiveled 90° for clearance.SPECIFICATIONS• Capacity 2000 lbs. • Body 2¼˝ OD round tube• Handle topwind • Mnt. swivel w/weld on ring• Lift 15˝ travel • Swivel pin ½˝ dia. w/chain• Lgth. ctr. of mount to base• Foot 3¾˝ x 7½˝Retracted 11˝ • Overall retracted lgth. 26˝Extended 26˝ • Shpg 20 lbs.

1000 lb. Trailer JackITEM 1-4930$39.95

• New, POWERLIFT AUTO-MOTIVE Model TJW trailerjack. Plated round tubing.Wheel allows trailer to bemoved for storage. Swivelmount with spring loaded pinallows jack to be swiveled 90°

for clearance. Bolts onto frames 2˝ - 4˝ highand 2˝ - 3½˝ deep.SPECIFICATIONS• Capacity 1000 lbs. • Wheel 6˝ dia. x 1⅞˝• Sidewind • Outer tube body 2˝ dia.• Travel 10½˝ • Swivel plate mounting• Height (swivel ctr. to ground) 5¾˝ x 6¾˝Retracted 12½˝ • Overall retracted ht. 22˝Extended 23˝ • Shpg 15 lbs.

20 Trailer Jacks www.surpluscenter.com8

12 VDC, 24˝ Travel,3500 lb. ElectricTongue JackITEM 28-1746$149.70• Brand new, BUYERSPRODUCTS Model 0093 500electric tongue jack. Ideal foruse on travel trailers and boattrailers. Powder-coated steeltubing, hardened steel gears,weather-sealed switches.Travel length includes 18˝ ofelectric-powered travelplus 6˝ of manual drop legextension length. Drop legadjust able in 1½˝ increments. Built-in lev-eling gauge and two LED night-lights.Crank-handle included for manual over-ride. Mounting bracket kit sold separately.SPECIFICATIONS • Speed 30 sec. full stroke• Load ratings: • Wiring 48˝ cord3500 lbs. continuous w/ 7-pin RV plug5000 lbs. break-away • Foot pad 5¼˝ O.D• Travel 24˝ (see above) • Retracted height 26½˝• Voltage 12 DC • Shpg. 23 lbs.

1200 lb. TrailerJackITEM 1-3821$32.99• New, VALLEY Model76292 trailer jack. Platedround tubing. Wheel allowstrailer to be moved for stor-age. Swivel mount withspring loaded pin allowsjack to be swiveled 90° forclearance. Bolts onto frames 2˝ - 5˝ highand 1½˝ - 3˝ deep.SPECIFICATIONS • Travel 10¼˝• Capacity 1200 lbs. • Wheel 5½˝ dia. x 2˝• Sidewind • Outer tube body 2˝ dia.• Height (swivel to ground) • Swivel plate mtg. 5⅜ ̋x 4⅜˝Retracted 13˝, • Overall retracted ht. 23¼˝Extended 23¼˝ • Shpg 15 lbs.

Trailer Jacks

• Brand new trailer jacks. Zinc plated inner tube for long life. Mounting style 2˝ dia. tube, footsize 4˝ x 8˝.2¼˝ Round Tube Body • Black painted outer tube. Swivel mount with retaining pin allowsjack to be swiveled 90° for clearance.2¼˝ Square Heavy Duty • 12 gauge tube body with pow der coated outer tube. Weld-on tu-bular mount allows jack to be swiveled 90° for clearance. 3 year mfg. warranty.

2¼˝ Round Tube BodyLoad Type Lgth. Retracted Overall

Capacity of of Mounting RetractedITEM lbs. Wind Travel Height Height Shpg. Price28-1613-10 2000 Top 10˝ 11¾˝ 15˝ 13 lbs. $18.9528-1613-15 2000 Top 15˝ 15¼˝ 18½˝ 13 lbs. $22.95

2¼˝ Square Tube BodyLoad Type Lgth. Retracted Overall

Capacity of of Mounting RetractedITEM lbs. Wind Travel Height Height Shpg. Price28-1608-10 2000 Top 10˝ 11˝ 15˝ 15 lbs. $27.9528-1608-15 2000 Top 15˝ 14½˝ 24¾˝ 19 lbs. $33.9528-1609-10 2000 Side 10˝ 10¾˝ 17¼˝ 16 lbs. $25.9528-1609-15 2000 Side 15˝ 14⅝˝ 26⅞˝ 20 lbs. $26.9528-1610-10 5000 Top 10˝ 11¼˝ 15¼˝ 16 lbs. $24.9528-1610-15 5000 Top 15˝ 14⅝˝ 24¼˝ 21 lbs. $26.9528-1611-10 5000 Side 10˝ 10½˝ 19½˝ 18 lbs. $33.9528-1611-15 5000 Side 15˝ 15½˝ 21¾˝ 21 lbs. $37.95

Retracted OverallMounting RetractedHeight Height

28-161328-1608

&28-1610

28-160928-1611

Trailer Jack WeldOn Hub

ITEM 1-4825$2.49

• New, universal trailer jack mount kit.JOHN DEERE Part TY16170. Includesweld on hub and pin with handle and 12˝retention chain.SPECIFICATIONS • Pin holes ⅝˝• Hub size 2˝ O.D x 2¼˝ • Pin ⅝˝ dia. x 3½˝• Wall thickness ¼˝ • Shpg. 1½ lbs.

12 VDC BatteryIsolatorSwitchITEM 11-3490$4.95• New, battery isolator key-switch. Circuitcloses when key is locked in place. Nylonhousing with removable twist-lock key.SPECIFICATIONS • Action maintained• Contacts SPST • Switch positions two• Contact ratings: • Face size 23/16˝ dia.100 Amps at 12 VDC • Mounting two holes

• Switch type rotary isolator 1½˝ c/c• Termination two • Mounting depth 1˝⅜˝-16 studs • Shpg. ½ lb.

12 VDCWiperMotor

ITEM 5-1767$19.99• New, right angle gearmotor with reversinggeartrain to give back and forth sweepingmotion. Originally for SUV rear windowwiper. Could also be used for animated dis-plays requiring similar movement. Integralpark position switching. Shaft has taperedserrated section and male 8mm x 1.25thread to attach wiper arm (not included).SPECIFICATIONS• Speed 30 cycles/min. • Mount 2 angled tabs on• Voltage 12 DC bracket & threaded• Amperage 0.5 Amps on shaft housing• Rotation approx. 165° arc • Shaft 0.393˝ dia.• Duty continuous x 0.75˝ overall length• Size 7˝ x 7½˝ x 4˝ • Shpg. 3 lbs.

2000 lb.TrailerJack

ITEM 1-4176$24.99• New, POWERLIFT trailer jack. Roundtubing. Gray painted outer tube and zincplated inner tube for long life. Weld onswivel mount with spring loaded retainingpin allows jack to be swiveled 90° forclearance.SPECIFICATIONS• Capacity 2000 lbs. • Lift 10˝• Handle topwind • Body dia. 2¼˝• Center of swivel to base ht.• Foot 3⅝˝ x 7˝Retracted 11¼˝ • Overall retracted height 17˝Extended 21¼˝ • Shpg. 12 lbs.

800-488-3407 Trailer Jacks & Truck Accessories 21&

5000 lb.TrailerJack

ITEM 1-4683$27.95• New, CEQUENT TRAILER PRODUCTSheavy duty trailer jack built for SCHUTT IN-DUSTRIES. 12 gauge round tubing. Pow-der coated outer tube and zinc plated innertube. Round tube mount allows jack to beswiveled 90°. Use with standard remov-able wheel (not included). ¼˝ thick plate al-lows use without wheel in soft or sandylocations.SPECIFICATIONS • ⅝˝ pin for mnt. w/retainer• Capacity 5000 lbs. • Foot plate 5¾˝ x 3½˝• Crank location sidewind • Tube extends below plate 2˝• Lift 13˝ travel • Attachment pin hole ⅜˝ dia.• Body 2-1/4˝ round tube • Overall retracted lgth. 22¾˝• Mounting ring 2˝ dia. • Shpg 21 lbs.• Length (mount center to end of inner tube)Retracted 10½˝, Extended 23½˝

12 VDC Light &Buzzer

ITEM 12-982$15.95

• Brand new, combination LED indicatorlight and buzzer. Both operate simultane-ously to draw attention.SPECIFICATIONS• Voltage 12 DC • Mount ¾˝ dia. hole• Lens color Red • Overall size 3˝ x 1˝ x 2˝• Terminals screw • Shpg. 1 lb.

24 VDCWiper Motors

Your Choice

$29.99• New, MARINCO right angle two speed wiper motors with reversing geartrain to give backand forth sweeping motion. Factory pre-set sweep of 110°, adjustable to 45°, 60°, 80°and 110°. Additional features include adjustable self parking/coast to park, corrosion-re-sistant case, two-speed motor, brass plated steel shaft, heavy-duty motor with right anglegear drive. Shaft length listed is length of mounting shaft and knurled wiper arm mount.SPECIFICATIONS FOR ALL • Speed:• Stall torque 109 in. lbs. Slow: 32-40 sweeps per min. • Mounting shaft ⅝˝ dia. threaded• Rotation sweep 45°, 60°, 80° & 110° Fast: 52-60 sweeps per min. • Size 7⅝˝ x 4˝ x 2⅛˝• Duty continuous • Knurled wiper arm mount ½˝ dia. x ½˝ l. • Shpg. 4 lbs.

AmperageNo Load Stall Shaft

ITEM Model Voltage Amps Amps Lgth. Wiring5-1790 MRV 38211-01 24 DC 0.25 to 0.6 5.75 to 6.5 1½˝ ¼˝ spade terminals5-1790-A MRV 38211-02 24 DC 0.25 to 0.6 5.75 to 6.5 1½˝ 3-way rocker switch5-1792-A MRV 38210-02 24 DC 0.25 to 0.6 5.75 to 6.5 2½˝ 3-way rocker switch5-1793 MRV 38210 24 DC 0.25 to 0.6 5.75 to 6.5 2½˝ Wire leads ** wire leads with screw terminal block

5000 lb.TrailerJack

ITEM 1-4824$25.99• New, BULLDOG trailer jack. Round tub-ing. Plated outer tube and inner tubes forlong life. Square mount for 2˝ tubing w/re-taining pin.SPECIFICATIONS• Capacity 5000 lbs. • Body 2¼˝ OD round tube• Handle topwind • Mount 2˝ square• Lift 15˝ travel • Swivel pin ½˝ dia. w/chain• Lgth. ctr. of mount to base• Foot 3¾˝ x 7½˝Retracted 15˝ • Overall retracted lgth. 26˝Extended 30˝ • Shpg 20 lbs.

RubberBumper Pad

ITEM 1-4157$14.95

• New, heavy rubber bumper. Use to pro-tect equipment or structures. Originally forfront end loaders. Rounded face with re-cessed mounting holes.SPECIFICATIONS• Mounting pattern 5½˝ x 3˝• Size 6˝ x 7⅞˝ x 3½˝• Bolt holes ½˝ dia. • Shpg. 5 lbs.

12 VDC LED AmberMarkerLight

ITEM 12-1001 $3.95• New, TRUCKLITE amber marker light.Two LED's. 5 ft. wiring harness with pro-tective loom. Includes two high densityfoam cushions for mounting. Note: this as-sembly has an obsolete vehicle trackingsystem inside, this technology is no longerin use and is not required to be connectedin order for the light to function.SPECIFICATIONS • Mount 2 hole 4¾˝ apart• Voltage 12 DC • Size 6⅝˝ x 2˝ x 2½˝• Lens color amber • Shpg. 1½ lbs.

UtilityLight

ITEM 12-1002$7.99• New, 12 Volt DC, 18 watt utility light. 32˝wiring harness with bullet connector forpositive and 5/16˝ ID ring terminal for ground-ing. Adjustable angle swivel bracket withclamp for 1˝ dia. tubing. Sealed clear lens.SPECIFICATIONS • Lens 4˝ x 3˝• Voltage 12 volt DC • Size 4¾˝ x 2½˝ x 3½˝• Wattage 18 • Shpg. 2 lbs.

22 Cab Heaters & Toggle Clamps www.surpluscenter.com8

Cab Heater InstallationKit

ITEM 28-1827$28.75

SPECIFICATIONS• One, shut-off valve ⅜˝ NPTM x ⅝˝ hosebarb• One, ⅜˝ NPTM x ⅝˝ hose barb• Two, ½˝ NPTM x ⅜˝ NPTF bushing• Four, ⅝˝ hose clamps• Shpg. ½ lb.

RoundDocumentHolder

ITEM 1-3971$8.99• Brand new, MANUAL-PAK 9000-14, holdsrolled up 8½˝ x 11˝ documents. Moldedplastic construction with twist lock lid andrubber seal to keep manuals, servicerecords or other documents clean and dry.SPECIFICATIONS• Document size 8½ ̋x 11 ̋x 1˝• Size 3.7 dia. x 12.5˝• Label area 5¼˝ x 1¾˝ • Shpg. ¼ lb.

Flat DocumentHolders• Brand new. Moldedplastic construction withtwo latches for lid andrubber seal to keep man-uals, service records orother documents clean and dry. Four holesfor mounting.Holds 8½˝ x 11˝ documentsITEM 1-3970 $14.99SPECIFICATIONS• MANUAL-PAK 9000-8 • Mounting pattern 5⅞˝ x 7˝• Document size 8½ ̋x 11 ̋x 1˝• Size 14.5˝ x 11˝ x 2.135˝• Label area 6¼˝ x 2¾˝ • Shpg. 3 lbs.Holds 6˝ x 8˝ documentsITEM 1-3972 $11.49SPECIFICATIONS• MANUAL-PAK 9000-16 • Mounting pattern 4¼˝ x 6˝• Document size 6˝ x 8˝ x 1˝ • Size 11.2˝ x 8.25˝ x 1.95˝• Label area 5˝ x 2¾˝ • Shpg. 3 lbs.

13200 BTU 12 VDCCab HeaterWith 2 Speed Fan

ITEM 28-1826 $216.95• Brand new, MARADYNE Model H-400012 cab heater. Heater uses enginecoolant to heat your cab. Mounts easily tofloor of cab. 2 speed fan with speed con-trol switch built into the housing. Four, ro-tatable, adjustable opening louvers.Glass-filled nylon housing, aluminum tubeand fin heating core.SPECIFICATIONS • Blower motor• Heating output voltage 12 VDC13200 BTU/HR amperage 6 amps

• Air flow 200 CFM • Mnt. three 5/16-18 x 1˝ studs• Hose fittings • Size 7⅜˝ x 7¼˝ x 9⅞˝⅝˝ dia. x 15/16˝ hosebarb • Shpg. 10 lbs.

Toggle Clamps• New, toggle clamps for various work-holding applications.

Made from plated steel. Vinyl covered handle.• All have straight handles except for item numbersindicated with ** at the end which have T-handles.

Arms: S = Solid arm O = Open arm Spindle: N = Neoprene tipped H = Hex head P = Plastic

Vertical Toggle Clamps Holding Height Arm Mount Height ITEM Model Force Under Arm Opens Mount Centers Arm Spindle Closed Shpg. Price 14-1109-FF * 62620 100 lbs. ⅝˝ 100° 4 bolt base ⅝˝ x 15/16˝ O N 2½˝ ½ lb. $4.95 14-1109-H * 62085 200 lbs. 13/16˝ 117° Clevis ½˝ S None 3¼˝ 1 lb. $4.95 14-1109-R 62143 500 lbs. 19/16˝ 100° Clevis ¾˝ S None 6⅛˝ 1½ lbs. $6.95* T Handles

Horizontal Toggle Clamps Holding Height Arm Mount Lgth. ITEM Model Force Under Arm Opens Mount Centers Arm Spindle Closed Shpg. Price 14-1107-A 62010 50 lbs. ¾˝ 90° Straight 9/16˝ O None 2¾˝ ½ lb. $4.95 14-1109-A 62020 50 lbs. 7/16˝ 90° 2 bolt base 9/16˝ O None 2¾˝ ½ lb. $4.95 14-1107-B 62025 50 lbs. 7/16˝ 106° 4 bolt base ½˝ x ⅝˝ O P 2¾˝ ½ lb. $4.95 14-1107-C 62030 50 lbs. 9/16˝ 90° Straight 9/16˝ O None 2¾˝ ½ lb. $4.95 14-1108-B 62035 50 lbs. 7/16˝ 90° 2 bolt base 9/16˝ O None 2¾˝ ½ lb. $4.95 14-1108-C 62040 50 lbs. 7/16˝ 100° 2 bolt base 9/16˝ O None 2¾˝ ½ lb. $4.95 14-1108-I 62185 500 lbs. 19/16˝ 107° 4 bolt base 13/16˝ x 1⅛˝ O None 11˝ 2 lbs. $6.95Toggle Pliers Holding Jaw Inner Width Jaw ITEM Model Force Open Closed Depth Spindle Notes Shpg. Price 14-1105-H 61470 700 lbs. 65/16˝ 211/16˝ 2½˝ ⅜˝-16 x 4⅛˝ — 1½ lbs. $9.95 14-1105-C 61410 — — 1⅝˝ 1¾˝ ⅜˝-16 x 3⅛˝ Vertical 1½ lbs. $7.95 14-1105-E 61430 — — 1½˝ 1¾˝ ⅜˝-16 x 3⅛˝ Vertical 1½ lbs. $7.95

TogglePliers

Vertical Angled Arm Horizontal

12 VDC Cab HeatersWith 3 Speed Fan

• Brand new, MARADYNE cab heaters.Heater uses engine coolant to heat yourcab. Mounts easily to wall or floor of cab.3 speed fan. Directional airflow doors.Steel housing, aluminum tube and fin heat-ing core. Comes with 3 speed fan switch.

25000 BTU

ITEM 28-1825$214.95SPECIFICATIONS• Model H-803012 • Blower motor• Heating output voltage 12 VDC2500 BTU/HR amperage 5 amps

• Air flow 250 CFM • Mnt. three 5/16-18 x 1¼ ̋studs• Hose fittings • Size 8⅛˝ x 7½˝ x 8⅛˝⅝˝ dia. x 15/16˝ hosebarb • Shpg. 12 lbs.

12500 BTU

ITEM 28-1824$166.95SPECIFICATIONS• Model H-503012 • Blower motor• Heating output voltage 12 VDC12500 BTU/HR amperage 2.9 amps

• Air flow 200 CFM • Mnt. three 5/16-18 x 1˝ studs• Hose fittings • Size 77/16˝ x 7⅜˝ x 71/16˝⅝˝ dia. x 1½˝ hosebarb • Shpg. 11 lbs.

1 Spool, 20 GPMLog SplitterValve

ITEM 9-8582$49.95• New, SPEECO S390410C0 hydrauliccontrol valve for operating double actingcylinders. Common valve used on logsplitters where valve is mounted to cylin-der port. Pressure release operated detenton return stroke with spool in, spring cen-ter on extend with spool out. Work Port B(retract port) closest to handle and workport A (extend port) farthest from handle.SPECIFICATIONS• Open center • In/Out ports ¾˝ NPT• Spools one • Work ports ½˝ NPT• Flow 20 GPM max. • Mount port mount• Pressure 3400 PSI max. • Size 9⅝˝x 3¾˝ x 2¾˝• Relief valve adj. set 3100 PSI • Shpg. 11 lbs.

800-488-3407 Hydraulic Log Splitter Valves & Books 23&

Prince LogSplitterValves

• Brand new PRINCELS3000. For control ofdouble acting cylin ders.

Open center, built-in ad-justable relief valve. No load checks.SPECIFICATIONS• 25 GPM • IN/OUT ¾˝ NPT• Adj. relief set at 2250 PSI • Work ports ½˝ NPT• PSI 2750 max. • Pressure release detents• Size 9¼˝ x 5˝ x 3˝ adj. 1000-2000 PSI

ITEM 9-1262 $79.95• Pressure release detent in return stroke,spring center on extend. Ideal for operatingdouble acting cylinder on log splitters.Shpg. 11 lbs.

ITEM 9-1684 $98.20• Same as ITEM 9-1262 except ¾˝ NPTports. Shpg. 10 lbs.

ITEM 9-1518 $98.20• Pressure release detent in both direc-tions. Shpg. 10 lbs.

ITEM 9-1517 $98.20• Spring return to neutral. Shpg. 8 lbs.

1 Spool, 30 GPMClosed CenterLog SplitterValve

ITEM 9-8021$155.70• Brand new, PRINCE RD5000 series hy-draulic control valve. Ideal for use withfarm tractors and industrial equipment withvariable displacement closed center sys-tems for operating log splitters. Pressureoperated detent on return stroke, springcenter on extend.SPECIFICATIONS• Closed center • Relief valve no relief• Spools one • In/Out ports ¾˝ NPT• Flow 30 GPM max. • Work ports ½˝ NPT• Pressure 3000 PSI max. • Mount 3 hole base• Detent release • Size 9½˝ x 5˝ x 3¼˝pressure 1400 PSI • Shpg. 16 lbs.

Prince Auto-CycleControlValveITEM 9-6587$293.30• Brand new PRINCE. Special Auto-Cyclevalve allows operator to completely cycle(out and back) a double acting cylinder byonly one handle movement. Ideal for logsplitter applications.• Both levers are pulled out to detent posi-tion, cylinder extends and at end of forwardstroke one lever automatically returns toneutral and cylinder reverses. When fully re-tracted second lever returns to neutral. (3work ports are used, two are tied togetherand then run to rod end of cylinder, thirdconnects to base end of cylinder).SPECIFICATIONS• For 1 double acting cyl. • Adj. relief 1500-3000 PSI• GPM 25 max. factory set at 2000 PSI• PSI 3000 max. • Double press. relief detent• IN/OUT ¾˝ NPT • Size 9½˝ x 7½˝ x 3¼˝• Work ports ¾˝ NPT • Shpg. 28 lbs.with SAE PortsITEM 9-6587-SAE $296.70• Same as our ITEM 9-6587 exceptIN/OUT SAE 12, work ports SAE 12.w/ Power BeyondITEM 9-6587-PB $300.80• Same as our ITEM 9-6587 only withpower beyond.

Two Spool Log Splitter/LifterValveITEM 9-7414$243.60• Brand new PRINCE Model RD522 CC EA -5A4B1 control valve. Ideal for use in logsplitters equipped with a log lift. First spoolhas a pressure release detent on thespool-out position and springs to centeron the spool-in position. Second spool is3-position spring to center. Detent pres-sure preset to 1200 PSI, adjustment range1000-2000 PSI.SPECIFICATIONS • Adjustable relief valve• Open center preset to 2000 PSI• 25 GPM max. Adj. range 1500-3000 PSI• 3000 PSI max. • Three bolt mount• IN, OUT ports ¾˝ NPT • Size 9½˝ x 7½˝ x 3¼˝• Work ports ½˝ NPT • Shpg. 29 lbs.

Hydraulic Study Courses

$27.95 EACH• Brand new. Published by WOMACK Edu -ca tional Publications. These texts provideanswers to your questions, not just theo-ries of operation. Widely used to train em-ployees and customers regarding basichydraulic principles. Shpg. 1½ lbs.

ITEM 9-1124INDUSTRIAL FLUID POWER - VOL. I• Broad coverage of pumps, cylinders, valvesand accessories. 288 pages. 350 illus.

ITEM 9-1125INDUSTRIAL FLUID POWER - VOL. II• Specific application data of air and hy -drau lic cylinders and valves used to con-trol them. 272 pages. 350 illus.

ITEM 9-1126INDUSTRIAL FLUID POWER - VOL. III• Includes applications using hydraulic ro-tary power. Comprehensive coverage onhydraulic motors, air motors, hydraulictransmissions, and rotary actuators. 248pages. 250 illus.

ITEM 9-1127FLUID POWER IN PLANT AND FIELD• General reference based on years of ex -pe ri ence in hydraulic field. Provides prac-tical information on installation, operationand servicing of hydraulic and pneumaticequipment. 232 pages. 350 illus.

Fluid PowerData Book

ITEM 9-102295¢• Brand new. 63 pages of valuable infor-mation on hyd. cylinders, motors, pumpsand systems. Formulas and tables forequipment selection. Also information onelectric fans and motors. Shpg. 6 oz.Add 80¢ Postage and Handling If Ordering Alone

PocketReference

ITEM 1-1456$9.95• Brand new. 768 pages packed full of in-formation yet small enough to fit in a shirtpocket. Chapters on air and gas, carpen-try, chem istry, computers, electricity, math,hardware, plumbing, steel and materials,surveying, welding and more. Hundreds ofconversion formulas. Size 3¼˝ x 5⅜˝ x ¾˝.Shpg. ¼ lb.

Economy 1 Spool, 25 GPMLog SplitterValveITEM 9-7724$59.95• Brand new, hydraulic control valve foroperating hydraulic cylinders. Pressure op-erated detent on return stroke, spring cen-ter on extend for use with log splitters orother auto detent applications.SPECIFICATIONS • Detent release• Open center pressure 1100 PSI• Spools one • In/Out ports ¾˝ NPT• GPM 25 max. • Work ports ½˝ NPT• PSI 2750 max. • Mount 3 hole base• Relief valve adj. set • Size 9¼˝ x 4⅜˝ x 3˝at 2200 PSI • Shpg. 12 lbs.

Special Low

Price!

24 Prince Hydraulic Stack Valves www.surpluscenter.com8Prince SV Control Valves

• Brand new PRINCE SV compact sectionalvalves. Size and flow rating works well withtoday’s small and medium size tractors. Alsomany marine and industrial applications. Sec-tional design allows valves to be assembledwith combination of spools to meet your exactrequirements. Valves ship unassembled withassembly instructions, bolt kits and handle as-semblies.• One to eight spool valve assembly and your choice of spool types.All IN and OUT sections have both top and side ports.SPECIFICATIONS• Max. 16 GPM, flow rating 12 GPM (nominal) • Power beyond capability• Max. 3000 PSI • Work ports SAE 8• Adjust. relief valve 1500-3000 PSI, factory set 2000 PSI • IN/OUT ports:• Parallel circuit Open center SAE 8• Cast iron valve sections w/chrome plated spool Open center/power beyond IN, PBYO SAE 8, OUT SAE 10• Load checks each section Closed center SAE 10

To Order:1. Fill in how many spools you need. 4. Determine type of spool(s).2. Fill in valve option. 5. Add the price of valve option and3. Determine order of spool(s). each spool type for total cost.

Example1. You have determined you need a 3 spool valve with an open center outlet.2. You want the first and second spools to control double acting cylinders with springreturn to neutral; the third spool to control a hydraulic motor with detent positions.

3. You need to order the following:

ITEM 9SV - o - o - o o o o o o o o Total number of spools 3rd Spool (F - Motor Spool Detent)

Valve Option (X - Open Center) 2nd Spool (B - Double Acting Spring Return)

1st Spool (B - Double Acting Spring Return)

To determine price add:Valve Option (which was “X”) .........................................................$106.951st Spool (which was “B”) ..............................................................$ 76.002nd Spool (which was “B”) .............................................................$ 76.003rd Spool (which was “F”) ..............................................................$ 94.00

Total $352.95

ITEM 9SV - o - o - oooooooo Total number of spools Valve Option Order and type of spools

Valve OptionsX Open center....................................$106.95Y Open center Power Beyond ............$113.95Z Closed center (no relief)..................$101.95

Standard Spool TypesA Single acting spring return .............$ 77.00B Double acting spring return ............$ 76.00C Double acting detent ......................$ 90.00D Float spool 4 position......................$101.00E Motor spool spring return ...............$ 80.00F Motor spool detent .........................$ 94.00

Series Spool Types• Allows more than one actuator to be op-erated at the same time. NOTE: Seriessection pressures are additive and the totalmust be less than the relief setting orpump pressure capability. Series sectioncannot be used in closed center applica-tions. Ports SAE 8.G Double acting series spring return ..$124.00H Motor spool series spring return .....$124.00I Motor spool series detent ...............$138.00

Optional Spool Types• Ports SAE 8

J Double acting spring return ............$138.00 with adj. (1500-3000 PSI) work port reliefsK Double acting spring return ............$189.00 with adj. (1500-2500 PSI) work port reliefs and anti-cavitation checksL Double acting spring return ............$146.00 with pilot operated checksM Double acting spring return ............$ 87.00 with metering notches in spool to allow better control of loadN Double acting spring return ............$150.00 with metering and non-adj. work port reliefs set 2000 PSI

Model Size Shpg.1 Spool 8⅝˝ x 5⅞˝ x 3¼˝ 15 lbs.2 Spool 8⅝˝ x 7¼˝ x 3¼˝ 22 lbs.3 Spool 8⅝˝ x 8¾˝ x 3¼˝ 29 lbs.4 Spool 8⅝˝ x 10⅛˝ x 3¼˝ 36 lbs.5 Spool 8⅝˝ x 11⅝˝ x 3¼˝ 42 lbs.6 Spool 8⅝˝ x 13˝ x 3¼˝ 48 lbs.7 Spool 8⅝˝ x 14½˝ x 3¼˝ 55 lbs.8 Spool 8⅝˝ x 16˝ x 3¼˝ 60 lbs.

3 X B B F

12 Volt DC SolenoidOperated SV Valves

• Brand new, Prince SV control valves with12 volt DC solenoid control for work sec-tions. Available in open center, open centerwith power beyond and closed center ver-sions with single or double acting cylinderspools (work ports blocked in neutral) ormotor spool (work ports open to tank inneutral). Open center and power beyondversions have a main inlet relief valve andspecial pressure buildup valve in outletsection to provide internal pilot pressure toshift the spools. Closed center valves donot have relief valve and do not require thebuildup section. These valves can be sup-plied in multi-section configurations oreven mixed with manual operated worksections. Please call our Tech Help 1-800-488-3407 for further information.

Valve OptionsX Open center....................................$133.50Y Open center Power Beyond ............$137.50Z Closed center .................................$ 99.50

Work Section OptionsP Single Acting Solenoid Operated .....$320.00O Double Acting Solenoid Operated....$319.00Q Motor Spool Solenoid Operated ......$322.00Example: 9SV-2E-X-OO is a two spool, open center,12 volt DC solenoid operated directional controlvalve for double acting cylinders.

ITEM 9SV- oE - o - o Valve Option Work Section OptionTotal Number of Spools

Two Section Prince SVSpacerSectionITEM 9-8455$112.00• Brand new. Two section spacer blockused with stackable Prince SV controlvalves. Use for creating separation be-tween spools when using more than onejoystick controller. The width of this blockis the same width as two SV spools. Thiswill need to be accounted for when con-sidering bolt kit lengths.SPECIFICATIONS• Size 5˝ x 2⅞˝ x 3˝ • Shpg. 5 lbs.

800-488-3407 Prince Hydraulic Stack Valves 25&

LoaderConfiguration

ITEM 9-7554$258.95• Open Center, both spools are doubleacting with spring centering.Reference 9SV-2-X-BB on page 24.Loader Configuration w/float

ITEM 9-7555 $283.95• Open Center, First spool double actingwith detented float position and doubleacting second spool.Reference 9SV-2-X-DB on page 24.

LoaderConfigurationw/Grapple

ITEM 9-7556$334.95• Open center, all three spools are doubleacting with spring centering.Reference 9SV-3-X-BBB on page 24.

Prince SV ValvesAir Shift KitITEM 9-8454-SV$120.35• Brand new, air shift kit for Prince SV Seriesof valves. Use compressed air source andcontrol to remotely operate valve . Replacescover at end opposite control lever. Will shiftspool both directions. Lever can still manu-ally operate valve. Aluminum body, fur-nished with cap screws.SPECIFICATIONS• Ports ⅛˝ NPT • Size 2½˝ x 1½˝ x 2˝• Pressure 150 PSI max • Shpg. 1 lb.

Prince 5D5000 ValvesAir Shift KitITEM 9-8454-RD$137.15• Brand new, air shift kit for Prince RD5000Series valves. Use compressed air sourceand control to remotely operate valve . Re-places cover at end opposite control lever.Will shift spool both directions. Lever canstill manually operate valve. Aluminumbody, furnished with cap screws.SPECIFICATIONS• Ports ⅛˝ NPT • Size 3⅝˝ x 2˝ x 2˝• Pressure 150 PSI max • Shpg. 1 lb.

Prince 20 ValvesAir Shift KitITEM 9-8454-20$132.60• Brand new, air shift kit for Prince 20 Seriesvalves. Use compressed air source andcontrol to remotely operate valve . Replacescover at end opposite control lever. Will shiftspool both directions. Lever can still manu-ally operate valve. Aluminum body, fur-nished with cap screws.SPECIFICATIONS• Ports ⅛˝ NPT • Size 2¾˝ x 1⅝˝ x 2˝• Pressure 150 PSI max • Shpg. 1 lb.

Remote Cable Controls for Prince Valves• Brand new. Remote controls for Prince Models SV (page 24), 20 Series (page 26) andRD5000 Series (pages 28 & 29) control valves. Die-cast metal controller bodies.

SV Valves 20 Valves Offset 9-1905 9-7514 * Handle $102.95 $202.40 Straight 9-1904 9-7513 * Handle $102.95 $202.40* Includes rubber boot

Model SV & 20 JoystickHandles• Brand new, PRINCE joy-stick handles for use withPRINCE stack valves. Al-lows one lever to controltwo adjacent work sections.Right/left controls one worksection, forward/backwardcontrols the second sec-tion. Spools can beope rated independently or simultaneously.If two joysticks are installed on one stackvalve, it is recommended that there be twostandard work sections between them toprevent handle interference. Shpg. 5 lbs.

Quick Order SV Valve Combinations• The following are some of our most popular configurations of the Prince SV valves. They have special item numbers toprovide easy ordering. Standard levers on each spool. Furnished unassembled. Includes all necessary bolt kits and seals.

Backhoe Configurationw/Joystick Controls

ITEM 9-7502 $741.95• Open Center, all six spools are doubleacting with spring centering. Two joysticklevers for ease of control. Outrigger sec-tions are in the middle and have individuallevers.Reference 9SV-6-X-BBBBBB on page 24and two of 9-1905 below.

Offset Straight

Prince Valve & Actuator Accessories

BackhoeConfigurationw/manualoutriggers

ITEM 9-7557$410.95• Open Center, all four spools are doubleacting with spring centering.Reference 9SV-4-X-BBBB on page 24.

BackhoeConfigurationw/hydraulicoutriggers

ITEM 9-7558$562.95• Open Center, all six spools are doubleacting with spring centering.Reference 9SV-6-X-BBBBBB on page 24.

ControlLevers

ITEM 9-6704 Single lever 4 lbs. $45.95• Operated in one axis and requires onecontrol cable and one connection kit.

ITEM 9-6704-J Joystick lever 6 lbs. $123.70• Operated in dual axis and requires twocontrol cables and two connection kits.

ITEM 9-6704-JS 6 lbs. $222.45• Same as ITEM 9-6704-J except with SPSTmomentary pushbutton switch in handle.

ControlCablesITEM 9-6705-49 49˝ lgth. 3 lbs. $42.50ITEM 9-6705-59 59˝ lgth. 3 lbs. $44.95ITEM 9-6705-79 79˝ lgth. 4 lbs. $49.35ITEM 9-6705-98 98˝ lgth. 4 lbs. $53.95

Valve Connection Kits ½ lb. each

ITEM 9-6706-RD RD5000 Valve $34.95ITEM 9-6706-SV SV Valve $32.10ITEM 9-6706-20 20 Valve $29.75

26 Prince Hydraulic Stack Valves www.surpluscenter.com8

Prince 20 Series Load Sense Control Valve• Brand new Prince “20” Series hydraulic load sense control valve. Interchangeablewith other popular brands of 20 GPM sectional valves.• Use with a pressure-flow compensated pump with load sensing. Load sense porton outlet section.• Parallel circuit. Very fine metering for precise control. All work sections have loadchecks. Furnished with handle, bolt kit and all o-rings to seal between sections. Inletsection has both top and side inlet and outlet ports. Outlet section has side ports.SPECIFICATIONS• Flow rate 20 GPM nominal • Inlet/Outlet ports SAE 12• Pressure 3500 PSI max inlet, 500 PSI max discharge • Load sense port SAE 4 w/drain orifice• No relief valve • Work ports SAE 10• Available with 1-7 work sections • Mounting 3 thru holes (1 on inlet, 2 on outlet)

To Order:1. Fill in how many spools you need. 3. Determine order of spool(s). 5. Add the price of valve option and2. Fill in valve option. 4. Determine type of spool(s). each spool type for total cost.

Valve TypeLS Load sense............................................................................................................$197.95

Spool TypesA Single acting cylinder, spring centered..................................................................$175.00B Double acting cylinder, spring centered .................................................................$169.00C Double acting, cylinder 3 position mechanical detent.............................................$174.00D Double Acting Cylinder, spring centered w/detented Float position ........................$202.00E Motor Spool, (work ports open to tank in neutral) spring centered..........................$175.00F Motor Spool, (work ports open to tank in neutral), 3 position mechanical detent....$180.00

Prince 20 Series Control Valves• Brand new, Prince Hydraulics 20 Series valves. Interchangeable mounting withother popular brands of “20” GPM valves. All sections have load check on eachwork port. Extra fine metering capabilites, chrome plated spools. Outlet can be ateither end of valve. Inlet section has both top and side inlet/outlet ports.• Parallel circuit. Rubber covered cast iron handles. Available in open center, opencenter with power beyond and closed center versions. Furnished unassembledwith handles and all necessary bolt kits and seals. See page 25 for joystick oper-ators, remote cables and adapters for use with 20 Series valves.SPECIFICATIONS• Flow rate 20 GPM nominal • Inlet/Outlet ports SAE 12 • Relief valve 2201-3000 PSI preset 2500• Pressure 3500 PSI max inlet, 500 PSI max discharge • Power Beyond port SAE 10 (open center and power beyond only)• Available with 1-7 work sections • Work ports SAE 10 • Mounting 3 thru holes (1 on inlet, 2 on outlet)

To Order:1. Fill in how many spools you need. 3. Determine order of spool(s). 5. Add the price of valve option and2. Fill in valve option. 4. Determine type of spool(s). each spool type for total cost.

Valve TypesX Open center with inlet relief ....................................................................................$185.95Y Open center with inlet relief and Power Beyond ......................................................$194.95Z Closed center (no relief valve) ................................................................................$157.95

Spool TypesA Single acting cylinder, spring centered ....................................................................$153.00B Double acting cylinder, spring centered...................................................................$146.00C Double acting, cylinder 3 position mechanical detent ..............................................$151.00D Double Acting Cylinder, spring centered w/detented Float position ..........................$191.00E Motor Spool, (work ports open to tank in neutral)spring centered ............................$153.00F Motor Spool, (work ports open to tank in neutral), 3 position mechanical detent......$158.00L Double Acting Cylinder,spring center w/pilot operated checks.................................$210.00

ITEM 9-20 - o - LS - oooooooooo Total number of spools Valve Type Spool Type Designations

Please see example on page 24 for how to order.

ITEM 9-20 - o - o - oooooooooo Total number of spools Valve Type Spool Type Designations

Please see example on page 24 for how to order.

Assembled Valve Dimensions# WorkSections Size Mtg. Pattern Shpg.1 Spool 4⅞˝ x 8⅝˝ x 4¼˝ 5⅜˝ x 2½˝ 16 lbs.2 Spool 6⅝˝ x 8⅝˝ x 4¼˝ 5⅜˝ x 4¼˝ 23 lbs.3 Spool 8⅜˝ x 8⅝˝ x 4¼˝ 5⅜˝ x 6˝ 30 lbs.4 Spool 10⅛˝ x 8⅝˝ x 4¼˝ 5⅜˝ x 7¾˝ 37 lbs.5 Spool 11⅞˝ x 8⅝˝ x 4¼˝ 5⅜˝ x 9½˝ 44 lbs.6 Spool 13⅝˝ x 8⅝˝ x 4¼˝ 5⅜˝ x 11¼˝ 50 lbs.7 Spool 15⅜˝ x 8⅝˝ x 4¼˝ 5⅜˝ x 13˝ 57 lbs.

Assembled Valve Dimensions# WorkSections Size Mtg. Pattern Shpg.1 Spool 4⅞˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 2½˝ 26 lbs.2 Spool 6⅝˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 4¼˝ 37 lbs.3 Spool 8⅜˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 6˝ 48 lbs.4 Spool 10⅛˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 7¾˝ 59 lbs.5 Spool 11⅞˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 9½˝ 70 lbs.6 Spool 13⅝˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 11¼˝ 80 lbs.7 Spool 15⅜˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 13˝ 90 lbs.8 Spool 17⅛˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 14¾˝ 100 lbs.9 Spool 18⅞˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 16½˝ 110 lbs.10 Spool 20⅝˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 18¼˝ 120 lbs.

800-488-3407 Prince Hydraulic Directional Control Valves 27&

8 GPM Wolverine by Prince MB SeriesCompact Double Acting Directional Control Valves• Brand new WOLVERINE by PRINCE MB Series directional control valvefor operating double acting cylinders. Ideal for small tractor and other lowflow applications requiring a compact control valve. Features includemonoblock construction, load check, built-in adjusta ble pressure relief valve,spring centering spool action, open center with enclosed plug to convert topower beyond or closed center, side or top inlet/outlet ports and vertical orhorizontal handle mounting.SPECIFICATIONS• Flow 8 GPM max. • Open center convertible to power beyond or closed ctr.• Pressure 3500 PSI max. • In/Out ports SAE 8• Relief valve 2000 PSI, adj. 2000-3500 PSI • Work ports SAE 8• Reqd. filtration ISO 4406 19/17/14 • Mount 3 hole base

Motoring Spool Valves can be found on page 29

# Spools ITEM Style Size Shpg. PriceOne 9-7861 DA spring centered 7⅝˝ x 4˝ x 2¼˝ 9 lbs. $ 95.95One 9-7861-F DA spring centered w/float 9⅛˝ x 4˝ x 2¼˝ 9 lbs. $199.95Two 9-7862 DA spring centered 7⅝˝ x 57/16˝ x 2¼˝ 12 lbs. $151.95Two 9-7862-F * DA spring centered w/float 9⅛˝ x 57/16˝ x 2¼˝ 12 lbs. $246.95Three 9-7863 DA spring centered 7⅝˝ x 613/16˝ x 2¼˝ 15 lbs. $238.95Four 9-7864 DA spring centered 7⅝˝ x 87/16˝ x 2¼˝ 18 lbs. $275.95Five 9-7865 DA spring centered 7⅝˝ x 913/16˝ x 2¼˝ 21 lbs. $337.95Six 9-7866 DA spring centered 7⅝˝ x 117/16˝ x 2¼˝ 24 lbs. $399.95

* First spool detented float

14 GPM Wolverine by Prince WVS SeriesDouble Acting Directional Control Valves

• Brand new, WOLVERINE by PRINCE WVS series monoblock directional con-trol valves. Features monoblock cast iron construction, load check, built-inadjustable pressure relief open center, side or top outlet port and vertical orhorizontal handle mounting.• Can be converted to closed center or power beyond with the addition of apower beyond sleeve ITEM 9-7998-PB (sold separately below).SPECIFICATIONS• Flow 14 GPM max. • Open center convertible closed center or power beyond • Pressure 4000 PSI max • In/Out ports SAE 8• Relief valve 2500 PSI, adj. 2200-3200 PSI • Work ports SAE 8• Reqd. filtration ISO 4406 19/ 17/ 14 • Mount 3 hole base

Motoring Spool Valves can be found on page 29

# Spools ITEM Style Size Shpg. Price

One 9-7974 DA spring centered 89/16˝ x 313/16˝ x 2¾˝ 9 lbs. $134.90Two 9-7976 DA spring centered 89/16˝ x 5¼˝ x 2¾˝ 12 lbs. $221.55Three 9-7977 DA spring centered 89/16˝ x 611/16˝ x 2¾˝ 16 lbs. $296.65Four 9-7978 DA spring centered 89/16˝ x 81/16˝ x 2¾˝ 20 lbs. $375.00Five 9-7979 DA spring centered 89/16˝ x 9½˝ x 2¾˝ 23 lbs. $439.75Six 9-7980 DA spring centered 89/16˝ x 1015/16˝ x 2¾˝ 26 lbs. $519.95

Power Beyond/Closed CenterConversion PlugITEM 9-7867-B $2.55• For use with Wolverine MB Series valves.Power beyond plug is necessary to convertvalves to closed center. Shpg. 1⁄10 lb.

Power Beyond/Closed CenterConversion SleeveITEM 9-7998-PB $22.75• For use with Wolverine WVS Series valves.Power beyond sleeve is necessary to con-vert valves to closed center. Shpg. ½ lb.

3 Position Detent KitITEM 9-7867-D $31.95• Detent kit for Wolverine MB Series valve.Converts spring centering spools to 3 po-sition manual detent. Shpg. ½ lb.

3 Position Detent KitITEM 9-7998-D $48.20• Detent kit for Wolverine WVS Seriesvalve. Converts spring centering spools to3 position manual detent. Shpg. 1 lb.

Joystick Handle KitITEM 9-7867-J $129.95• Brand new, straight joystick handle foruse with Wolverine MB Series valves. Al-lows one lever to control two different ad-jacent work sections. Spools can beoperated independently or simultaneously.If two joysticks are installed on one stackvalve, it is recommended that there be twostandard work sections between them toprevent handle interference.SPECIFICATIONS• Straight handle joystick control • Shpg. 2 lbs.

MB Series Accessories

WVS Series Accessories

Joystick Handle KitITEM 9-7998-J $173.95• Brand new, straight joystick handle foruse with Wolverine WVS Series valves. Al-lows one lever to control two different ad-jacent work sections. Spools can beoperated independently or simultaneously.If two joysticks are installed on one stackvalve, it is recommended that there be twostandard work sections between them toprevent handle interference. Shpg. 2 lbs.

28 Hydraulic Control Valves www.surpluscenter.com8

Single Acting 45 GPMControlValve

ITEM 9-7493$243.00• Brand new, BRAND HYDRAULICS ModelDC16T3LBS high flow directional controlvalve. Cast iron body with Buna-N O-rings.High lift, ball spring relief valve. Handle in-cluded.SPECIFICATIONS• Open center • Reqd. filtration 20 micron• One single acting cyl. spool• In/Out ports SAE 16spring to center 3 position• Work port SAE 16

• Flow 45 GPM max. • Mount 4 bolts on• Pressure 3000 PSI max. 4¾˝ x 3⅜˝ ctrs.• Relief valve adj. • Size 105/16˝ x 51/32˝ x 4¼˝set at 1500 PSI • Shpg. 18 lbs.

One Spool PrinceControlValves

• Brand new PRINCE RD2500 Series.Monoblock high tensile strength gray castiron body. Hard chrome plated spools.Open center with conversion plug forclosed center applications. Load checks.SPECIFICATIONS• One spool valve • Adj. relief 1500-3000 PSI• Max. 20 GPM factory set at 1500 PSI• Max. 3000 PSI • Spring centering• IN/OUT ¾˝ NPT • Size 9 ˝ x 4¼˝ x 3 ˝• Work ports ½˝ NPT • Shpg. 12 lbs.

Single ActingITEM 9-6763 $100.80Double Acting – IN/OUT ½˝ NPT

ITEM 9-6764 $92.20• Not convertible to closed center.

Double ActingITEM 9-6765 $92.20Detent KitITEM 9-8028-D $21.60• 3 position manual detent kit. Shpg. 1 lb.

Prince Single ActingControlValve

ITEM 9-6700$135.60• Brand new PRINCE RD5000 Series. Hy-draulic control valve for operating singleacting cylinders. Monoblock gray cast ironbody. Hard chrome plated spools. Opencenter. Load checks.SPECIFICATIONS• One spool valve • Adj. relief 1500-3000 PSI• Max. 25 GPM factory set at 2000 PSI• Max. 3000 PSI • Spring centering• IN/OUT ¾˝ NPT • Size 9½˝ x 5˝ x 3¼˝• Work port ½˝ NPT • Shpg. 16 lbs.

One Spool, Double Acting45 GPM ControlValves

• Brand new, BRAND HYDRAULICS highflow directional control valve. Cast ironbody with Buna-N O-rings. High lift, ballspring relief valve. Handle included.SPECIFICATIONS• Open center • In/Out ports SAE 16• Flow 45 GPM max. • Work ports SAE 16• Pressure 3000 PSI max. • Mount 4 bolts• Relief valve adj. on 4¾˝ x 3⅜˝ ctrs.set at 1500 PSI • Size 105/16˝ x 51/32˝ x 4¼˝

• Reqd. filtration 20 micron • Shpg. 18 lbs.

ITEM 9-7494 $243.00• Model DC16T4LBS. One double actingcylinder spool, spring-to-center, 3-position.

ITEM 9-7495 $243.00• Model DC16O4LBS. One double actingmotor spool, spring-to-center, 3-position.

ITEM 9-7495-D $243.00• Model DC16O4LBD. One double actingmotor spool, 3-position detent.

Closed CenterITEM 9-7496 $212.55• Model DC16C4LS. Closed center. Onedouble acting cylinder spool, spring-to-center, 3-position. No relief valve. Size 91/16˝x 51/32˝ x 4¼˝.

Detent KitITEM 9-4895-D $39.90• 3 position manual detent kit. Shpg. 1 lb.

Power Beyond Sleeves• Provides oil to downstream valve. Shpg. 1 lb.

ITEM 9-4895-B ¾˝ NPT $14.20ITEM 9-4895-B-S SAE 12 $18.85

Prince Control Valves• Brand new PRINCE RD5000 Series monoblock con-trol valves. Double acting spools. Cast iron valve body,chrome plate spools. Parallel spool circuit allows anycombination of spools to be used simultaneously. AllPrince RD 5000 Series valves can be used with thePrince cable controls on page 25. Closed center con-version plug, power beyond sleeve and three positiondetent kit sold below.Cylinder Spools - Work ports blocked in neutral. Loadchecks prevent load from dropping when spool is shifted.SPECIFICATIONS• Max. 25 GPM • Adjustable relief valve 1500-3000 PSI factory set at 2000 PSI• Max. 3000 PSI • Spring centering

NPT Ports SAE Ports• IN/OUT ¾˝ NPT, • IN/OUT SAE 12Work Ports ½˝ NPT Work Ports SAE 10

Available with your choice of NPT or SAE ports

One Spool Valves 30 GPMNPT Ports SAE PortsITEM ITEM Style Size Shpg. Price

9-6701 9-1789 DA spring centered 9½˝ x 5˝ x 3¼˝ 16 lbs. $130.109-6701-F 9-1789-F DA spring centered w/float 9½˝ x 5˝ x 3¼˝ 16 lbs. $151.65

Two Spool Valves 25 GPMNPT Ports SAE PortsITEM ITEM Style Size Shpg. Price

9-6702 9-7875 DA spring centered 9½˝ x 7¼˝ x 3¼˝ 25 lbs. $207.559-6702-F 9-7875-F DA spring centered w/float 9½˝ x 7¼˝ x 3¼˝ 25 lbs. $229.10

Three Spool Valves 25 GPMNPT Ports SAE PortsITEM ITEM Style Size Shpg. Price

9-6703 9-7876 DA spring centered 9½˝ x 9½˝ x 3¼˝ 36 lbs. $294.859-6703-F 9-7876-F DA spring centered w/float 9½˝ x 9½˝ x 3¼˝ 36 lbs. $316.40

Closed Center Plug

ITEM 9-4895-C $14.70• Use to convert RD5000 valves toclosed center. NOTE: Conversion doesnot allow for drain-off of standby spoolleakage. This can allow a small amountof oil to enter the work ports when valveis in neutral. Shpg. 1 lb.

800-488-3407 Hydraulic Motor Spool Valves 29&

14 GPMMotorControlValve

ITEM 9-7975$160.75• Brand new, WOLVERINE by PRINCEWVS Series monoblock directional controlvalves. Features cast iron construction,load check, built-in adjustable pressure re-lief, open center, side or top outlet port andvertical or horizontal handle mounting.Spool details: spool 1 DA motor spool, 3position detent.• Can be converted to closed center orpower beyond with the addition of a powerbeyond sleeve our ITEM 9-7998-PB (soldseparately on page 27).SPECIFICATIONS• Model WVS11C5C1 • Reqd. filtration• Open center ISO 4406 19/ 17/ 14• Spools one • In/Out ports SAE 8• Flow 14 GPM max. • Work ports SAE 8• Pressure 4000 PSI max. • Mount 3 hole base• Relief valve 2500 PSI, • Size 89/16˝ x 313/16˝ x 2¾˝adj. 2200-3200 PSI • Shpg. 9 lbs.

Compact8 GPM MotorControlValve

ITEM 9-7860$120.95• Brand new PRINCE MB Series directionalcontrol valve for operating rever sible hy-draulic motors. Ideal for small tractor andother low flow applications requiring a com-pact control valve. Features includemonoblock construction, built-in adjusta blepressure relief valve, three position detentspool action, open center with enclosedplug to convert to power beyond or closedcenter, side or top inlet/outlet ports and ver-tical or horizontal handle mounting.SPECIFICATIONS • Flow 8 GPM max.• Open center convertible to• Reqd. filtrationpower beyond or closed ctr. ISO 4406 19/17/14• Pressure 3500 PSI max. • In/Out ports SAE 8• Relief valve 2000 PSI, • Work ports SAE 8adj. 2000-3500 PSI • Mount 3 hole base• Size 7⅝˝ x 4˝ x 2¼˝ • Shpg. 9 lbs.

Single Spool 18 GPMControlValve

ITEM 9-7458$214.60• Brand new, BRAND HYDRAULICS ModelSDCF755M184LF1 directional control valvewith flow control. Combines a 4-way direc-tional control valve with a full range, pres-sure-compensated, by-pass type flowcontrol valve, and an adjustable pilot-oper-ated relief valve. Extremely fine flow meter-ing to the work ports in direct proportion tothe handle movement. Cast iron body withBuna-N O-rings. Handle included.SPECIFICATIONS• Open center • Reqd. filtration 30 micron• Spool 1 double acting, • In/Out ports ¾˝ NPTmetered flow motor spool,• Work ports ½˝ NPTfriction detent • Mount 3 bolts on

• Flow 18 GPM max. 25/16˝ x 311/16˝ x 315/16˝ ctrs.• Pressure 3000 PSI max. • Size 8⅜˝ x 4¼˝ x 33/16˝• Relief valve adj. set 1500 PSI • Shpg. 8 lbs.

Flow/DirectionalControlValve

ITEM 9-5174$214.60

• Brand new BRAND HYDRAULICS. Com-bines a directional control valve with pres-sure compensated flow control in onebody. Use to control speed and directionon cylinders, motors. Work ports blockedin neutral. Frictional detent on handle tomaintain constant speed. Open center.SPECIFICATIONS • IN/OUT ¾˝ NPT• 18 GPM max. • Work ports ½˝ NPT• 3000 PSI max. • Size 7⅜˝ x 3⅜˝ x 3¼˝• Adj. relief valve • Shpg. 7 lbs.

Rotary ControlValve

ITEM 9-7872$161.25• Brand new, PRINCE RD512JD5A4B3 di-rectional control valve with rotary spool.Single spool, double acting. Turning spool90° CW goes to full spool in and 90° CCWto full spool out. Detent in center position.Use for controlling hydraulic motors. Nohandle.SPECIFICATIONS• Open center • In/Out ports ¾˝ NPT• Flow 30 GPM max. • Work ports ½˝ NPT• Pressure 3000 PSI max. • Mount 3 holes thru body• Relief adj. to 1500-3000, • Size 9½˝ x 5˝ x 3¼˝preset at 2000 PSI • Shpg. 16 lbs.

Rotary SpoolControl ValveHandleITEM 9-7872-H$38.95• Brand new, PRINCE Model 660150084handle kit for PRINCE rotary spool controlvalve. Shpg. 1 lb.

High Flow MotorControlValvesw/ Flow Control

$377.95 each• Brand new, BRAND HYDRAULICS direc-tional control valve with flow control. Com-bines a 4-way directional control valve witha full range, pressure compensated, by-pass type flow control valve and a pilot op-erated relief valve. Extremely fine flowmetering to the work ports in direct propor-tion to the handle movement. Cast iron bodywith Buna-N O-rings. Handle included.SPECIFICATIONS• Open center • Reqd. filtration 20 micron• One double acting, • In/Out ports SAE 16metered flow motor spool,• Work ports SAE 16friction detent • Mount 4 bolts

• Pressure 3000 PSI max. on 4¾˝ x 3⅜˝ ctrs.• Relief valve adj. • Size 91/16˝ x 51/32˝ x 4¼˝set at 1500 PSI • Shpg. 18 lbs.

ITEM Model GPM9-7497-45 DCF16M454LF1 45 max.9-7497-30 DCF16M304LF1 30 max.

Prince Motor Spool Valves

• Brand new PRINCE RD5000 Seriesmonoblock motor spool control valves.Work ports connected to tank in neutral somotor can free wheel. No load checks. Cast ironvalve body, chrome plate spools. Parallel spoolcircuit allows any combination of spools to work si-multaneously. Closed center conversion plug, power beyond sleeveand three position detent kit sold on page 28.SPECIFICATIONS• Max. 25 GPM • IN/OUT ¾˝ NPT, work ½˝ NPT • Adjustable relief valve 1500-3000 PSI• Max. 3000 PSI • Spring centering factory set at 2000 PSI

ITEM Spools Size Shpg. Price9-6759 One 9½˝ x 5˝ x 3¼˝ 16 lbs. $135.609-6760 Two 9½˝ x 7½˝ x 3¼˝ 25 lbs. $218.559-6761 Three 9½˝ x 9½˝ x 3¼˝ 36 lbs. $311.30

One Spool PrinceMotor

ControlValves

• Brand new PRINCE RD2500 Series.Monoblock high tensile strength gray castiron body. Hard chrome plated spools.Open center with conversion plug forclosed center applications. Load checks.SPECIFICATIONS• One spool valve • Adj. relief 1500-3000 PSI• Max. 20 GPM factory set at 1500 PSI• Max. 3000 PSI • Spring centering• IN/OUT ¾˝ NPT • Size 9 ˝ x 4¼˝ x 3 ˝• Work ports ½˝ NPT • Shpg. 12 lbs.

ITEM Spool Action Price9-6766 Spring Centered $96.109-6767 3 Position Detent $101.85

30 Hydraulic Joystick & Directional Valves www.surpluscenter.com8

1 Spool DirectionalControlMotorSpoolValve

ITEM 9-8464$79.95

• New, WALVOIL SD4 Series monoblockdirectional control motor spool valve. Twoposition detent for controlling a hydraulicmotor in one direction only. Features castiron construction, open center, and verticalor horizontal handle mounting. No reliefvalve.SPECIFICATIONS • In/Out ports SAE 8• Open center • Work ports SAE 6• Spools one • Mount 2 hole base• Flow 12 GPM max. • Size 7˝ x 3½˝ x 2¼˝• Pressure 3600 PSI max. • Shpg. 9 lbs.

2 Spool, 10 GPMJoystick LoaderControl Valve

ITEM 9-7401$268.40

• Brand new. BRAND ModelLV22RFSTKAB. Compact twospool joystick valve for oper-ating double acting cylinders.Ideal for use on front endloaders on small to medium

sized tractors, lift trucks, andother mobile equipment requiring

a compact valve. The two spools can beoperated independently or simultaneouslydepending on handle movement. Firstspool has regenerative feature for rapid ex-tension of cylinder and second spool hasfloat to allow free movement of cylinder.Open center. Optional conversion sleevefor power beyond or plug for closed centeroperation sold separately. Spring centeringspool action with detented fourth positionfor float or regenerative spools.SPECIFICATIONS• 10 GPM • Double acting• 3000 PSI • In/Out ports SAE 8• Adj. relief 800-3000 PSI • Work ports SAE 8set at 2000 • Size 5½˝ x 2⅜˝ x 17⅞˝

• Open center • Shpg. 14 lbs.

Power Beyond SleeveITEM 9-7401-B $17.10• Provides oil to a downstream valve. PortSAE 8. Shpg. ½ lb.

Closed Center PlugITEM 9-7401-C $16.95• For closed center systems with variabledisplacement pumps. Shpg. ½ lb.

2 Spool, 25 GPMw/Float

ITEM 9-4782$308.10• Brand new PRINCE RD5000 Se-ries. Two spool joystick valve foroperating double acting cylin-ders. Ideal for use on front endloaders, lift trucks, and othermobile equipment. The twospools can be operated in-dependently or simultane-ously depending on handlemovement. First spool float.Open center. Spring centering.SPECIFICATIONS• 25 GPM, 3000 PSI • IN/OUT ¾˝ NPT• Double acting • Work ports ½˝ NPT• 1500-3000 adj. relief • Size 7½˝ x 3¼˝ x 11˝set 2000 PSI • Shpg. 26 lbs.

3 Spool, 25 GPMWith Grapple Control

ITEM 9-8217$408.30

• Brand new PRINCE HC-V-BP22. Three spool joystickvalve for operating doubleacting cylinders with firstspool float and third spoolsingle lever to operate adouble acting grapplecylinder. Features includemonoblock gray cast ironbody, hard chrome platedspools, load checks andspring centering spools. The

two spools controlled by joystick lever canbe operated independently or simultane-ously depending on handle movement.Open center can be converted to power be-yond or closed center by changing conver-sion plug. Ideal for use on front end loaderswith a grapple or other attachments, lifttrucks, and other mobile equipment.SPECIFICATIONS• Open center • Pressure 3000 PSI max.• Spools three • In/Out ports SAE 12• Flow 25 GPM max. • Work ports SAE 10• Relief valve • Mount 3 holes thru bodyfactory set at 2000 PSI • Size 15˝ x 9¾˝ x 3¼˝adjust. 1500-3000 PSI • Shpg. 39 lbs.

Power Beyond Sleeves• Provides oil to adownstream valve.Shpg. 1 lb.

ITEM 9-4895-B ¾˝ NPT $14.20ITEM 9-4895-B-S SAE 12 $18.85Closed Center Plug

ITEM 9-4895-C$14.70• Use to convert RD5000 valves to closedcenter. NOTE: Conversion does not allow fordrain-off of standby spool leakage. This canallow a small amount of oil to enter the workports when valve is in neutral. Shpg. 1 lb.

2 Spool, 14 GPM PrinceJoystick LoaderControlValve

ITEM 9-8185$325.65

• Brand new PRINCE LVR1GB5AB6. Twospool joystick valve for operating doubleacting cylinders with float on first spool.Features include monoblock gray cast ironbody, hard chrome plated spools, loadchecks and spring centering spools. Thetwo spools controlled by joystick lever canbe operated independently or simultane-ously depending on handle movement.Open center that can be converted topower beyond by changing conversionplug. Ideal for use on front end loaders, lifttrucks, and other mobile equipment.SPECIFICATIONS• Open center • Pressure 3000 PSI max.• Spools two • In/Out ports SAE 10• Flow 14 GPM max. • Work ports SAE 8• Relief valve factory • Mnt. 6 drilled/tapped holesset at 2000 PSI • Size 2¾˝ x 6⅜˝ x 9½˝adjustable 1500-3000 PSI • Shpg. 25 lbs.

Power Beyond SleeveITEM 9-8185-B $19.00• Provides oil to a downstream valve. PortSAE 8. Shpg. ½ lb.

Prince RD5000Joystick Valves

3 SpoolJoystick

Valvewith Float

ITEM 9-7761-A $169.99• New, NIMCO Model 10978-1S joystickvalve. Open center with power beyond.Three spools for double-acting cylinderswith detented float position on the firstspool. Non-adjustable relief valve. Nolevers or rubber boots.SPECIFICATIONS• Open center • In/out ports SAE 10• Spools three • Work ports SAE 8• Flow 24 GPM max. • Mount four bolt on• Pressure 4600 PSI max. 6⅛˝ x 2⅞˝ centers• Relief valve fixed • Size 12˝ x 7⅞˝ x 5½˝130 BAR (1885 PSI) • Shpg. 37 lbs.

JoystickPilotControlValve

ITEM 9-8661$189.95• New BOSCH REXROTH Model 4TH6 NH#87578504 joystick style hydraulic pilotcontrol valve. Use with two spool, pilot op-erated directional control valve to providejoystick control. Spring to neutral valve ac-tion that controls four plungers independ-ently or simultaneously. Inlet port blockedin neutral. Work ports open to tank in neu-tral. 12 volt DC solenoid hold feature onone plunger for float. Requires a handlewith M12-1.75 threaded end. Ideal re-placement valve for New Holland pilotcontrol skid steer loaders and other appli-cations for pilot control of directionalvalves.SPECIFICATIONS • Work ports SAE 6• Closed center • Mount four bolt on• Flow 4 GPM max. 4¼˝ bolt circle• Pressure 725 PSI max. • Size 4 ˝x 3⅞˝ x 6⅛˝• In/Out ports SAE 6 • Shpg. 9 lbs.

4 SpoolControl Valve

ITEM 9-8266$229.95

• New. WALVOILModel SDS100 fourspool valve. Featurestwo individual inlets with

first inlet directing oil to spoolsone and two. Second inlet directing oil tospools three and four. Common outlet. In-dividual adjustable main line reliefs foreach circuit. Load checks on spools one,two and three. Ideal for dual hydraulic cir-cuit systems.Spool Details:• Spool 1 Motor spool spring center spool out, detent spool in• Spool 2 Double acting spring centered• Spool 3 Double acting friction detent• Spool 4 Double acting w/pilot checks spring centeredSPECIFICATIONS• Open center • Pressure 4600 PSI• Spools four • In ports SAE 8• Flow 16 GPM • Out port SAE 12• Relief valves adj. from • Work ports SAE 81500 to 3000 PSI • Size 10˝ x 711/16˝ x 6¼˝set at 1500 PSI • Shpg. 44 lbs.

800-488-3407 Hydraulic Solenoid Valves 31&

Electric FlowControl

• Brand new BRAND HYDRAULICS. Vari-able flow control valve with 12 volt DCcontroller for remote operation. Gives con-venient hydraulic motor speed control fromtractor cabs.SPECIFICATIONS • Ports SAE 12• 12 volt DC control • Size 9½˝ x 5˝ x 1⅞˝• 3000 PSI max. • Shpg. 12 lbs.

ITEM 9-5178-15 $559.95• Flow range 0 - 15 GPM.

ITEM 9-5178-30 $559.95• Flow range 0 - 30 GPM.

D03 Subplates• Brand new D03 aluminum subplatesfor solenoid operated valves.• Parallel circuit for closed center valves.• Series circuit for open center valves. Parallel Series

Parallel SeriesValves ITEM Price ITEM Price Ports Shpg.

1 9-4070-1 $ 36.10 9-5883-1 $ 35.95 SAE 6 2 lbs.2 9-4070-2 $ 89.95 9-5883-2 $ 90.20 IN SAE 10, OUT SAE 12, Work SAE 8 6 lbs.3 9-4070-3 $114.95 9-5883-3 $127.20 IN SAE 10, OUT SAE 12, Work SAE 8 7 lbs.4 9-4070-4 $144.95 9-5883-4 $157.00 IN SAE 10, OUT SAE 12, Work SAE 8 9 lbs.

12 VDCAmperage 3.5

Size 8¾˝ x 1⅞˝ x 2⅛˝

120 VACAmperage 0.35

Size 7¾˝ x 1⅞˝ x 2⅛˝

12 VDCAmperage 1.67

115 VACAmperage 0.18

Directional Control Valves

• Brand new HYDRAFORCE dual solenoiddirectional control valves.

SPECIFICATIONS • Pressure 3500 PSI • Mount 2 hole side 2˝ c/c• Spools one • In/Out ports SAE 6 • Size 2½˝ x 1¾˝ x 7¾˝• Flow 5 GPM • Work ports SAE 6 • Shpg. 5 lbs.

Voltage ITEM Price Valve Type Spool Details9-7987 $109.95 Open center Work ports blocked in neutral9-7989 $107.95 Closed center All ports blocked in neutral9-7988 $109.95 Open center All ports open to tank in neutral9-7990 $137.95 Open center Work ports blocked in neutral9-7992 $135.95 Closed center All ports blocked in neutral9-7991 $137.95 Open center All ports open to tank in neutral

Hydraulic Solenoid Valves• Brand new EATON VICKERS DG4V-3 Series. Dual sole-noid directional valves for operating hydraulic cylinders,motors and other actuators. Spring centering spool action.Manual over-ride on solenoids. Valves ship with four cap-screws for mounting. RequiresD03 subplate sold separately on this page. Use with two Hirschmann connectors (notincl.) for wiring.SPECIFICATIONS• GPM 10½ • PSI 3000 • Ports D03 subplate mtg. • Shpg. 6 lbs.

Voltage ITEM Price Valve Type Spool Details9-6136 $128.15 Open center Work ports blocked in neutral9-6138 $113.60 Closed center All ports blocked in neutral9-6137 $125.50 Open center All ports open to tank in neutral9-7235 $159.60 Open center Work ports blocked in neutral9-7237 $172.95 Closed center All ports blocked in neutral9-7236 $154.25 Open center All ports open to tank in neutral

Solenoid Coil Wire ConnectorITEM 11-2457 $4.80• Brand new HIRSCHMAN style connector for installation of wires to sole-noid coil. Two connectors required for each solenoid valve. Shpg. 1⁄10 lb.

12 VDCAmps 1.67

115 VACAmps 0.18

12 VDC & 115 VACSolenoidOperatedPoppetValves• Brand new HY-DRAFORCE. Solenoid op-erated 2 way poppet typevalves. Use for starting, stopping, or dump-ing of hydraulic circuits to 3000 PSI (not a di-rectional control valve). Available in N.O. orN.C. configurations with 12 volt DC or 115volt AC coils. Continuous rated solenoidswith hardened seats for long life and lowleakage. Rated 12-15 GPM, ports SAE 8.Shpg. 2 lbs.

Voltage ITEM Valve Type Price9-5112-NO Normally Open $69.959-5112-NC Normally Closed $59.959-5111-NO Normally Open $82.959-5111-NC Normally Closed $72.95

Directional Control Valves

• New, HYDAC RM230 series monoblockdirectional control valve. Features cast ironconstruction, load check, open center andside or top inlet/outlet ports. No relief valve.SPECIFICATIONS• Open Center • In/Out ports SAE 10/SAE 12• Flow 20 GPM max. • In/Out optional top ports SAE 8• Pressure 3000 PSI max. • Work ports SAE 8• No relief valve • Mount 3 hole base

ITEM Spools Size Shpg. Price9-8617-1 One 8˝ x 4˝ x 2⅝˝ 12 lbs. $59.959-8617-2 Two 8˝ x 5⅝˝ x 2⅝˝ 17 lbs. $109.959-8617-3 Three 8˝ x 7⅜˝ x 2⅝˝ 22 lbs. $169.959-8617-4 Four 8˝ x 9˝ x 2⅝˝ 27 lbs. $229.95

32 Hydraulic Selector Valves www.surpluscenter.com8

12 VDC SolenoidSelectorValve

ITEM 9-7986$151.95• Brand new HYDRAFORCE. Three port 12volt DC solenoid operated selector valve.Use to switch pump flow from one circuitto a different circuit.SPECIFICATIONS• Flow 15 GPM • Pressure 3500 PSI• Voltage 12 volt DC • Ports SAE 12• Amperage 2.8 amps • Size 4˝ x 2¼˝ x 8˝• Terminal connection wire leads • Shpg. 8 lbs.

12 VDC Hyd. DoubleSelectorValve

ITEM 9-8602 $159.99• Brand new, DYNAMIC Model DSV 12volt DC solenoid operated double selectorvalve. Allows one directional valve to op-erate two independent cylinders. Energiz-ing coil shifts from cylinder 1 to cylinder 2.Ideal for adding a “thumb” to buckets onloaders. Furnished with O-ring so they canbe stacked together for even more func-tion choices. Includes Hirschmann wiringconnector.SPECIFICATIONS• Flow rate 13.2 GPM • Connector Hirschmann• Pressure 3600 PSI max • Ports six SAE 8• Coil voltage 12 VDC • Size 7˝ x 2½˝ x 2¾˝• Current 3 amps • Shpg. 10 lbs.

12 VDC Solenoid OperatedDouble Selector Valves

• Brand new. Dual 12 volt DC solenoid operated dou-ble selector/multiplier valve. Use to expand the num-ber of tractor remotes or operate two different circuitsconsisting of cylinders or motors from a single direc-tional valve. Rated 3000 PSI. Terminal connections are¼˝ spade. Choose between individual or primary cir-cuit types with two different rated flow rates.

Individual Circuit Selector• Each circuit has its own coil that is energized to allow a directional control valve to op-erate the circuit selected. When used with “variable flow” or “closed center” systemsvalve can be used as a selector, or power both solenoids to direct fluid to both circuits atthe same time. A SPDT-CO switch or two momentary pushbutton switches are requiredto operate selector valve. ITEM Flow Ports Amps Size Shpg. Price 9-5117 15 SAE 8 1.67 4½˝ x 2½˝ x 6½˝ 7 lbs. $152.95 9-7738 20 SAE 12 2.6 5¼˝ x 3˝ x 8⅞˝ 15 lbs. $309.95Primary Circuit Selector• Primary type allows a directional control valve to operate one circuit with no power toselector valve. To select the other circuit, both solenoids are powered. This operation al-lows selection to be done by a SPST pushbutton or toggle switch. Ideal for operating a“thumb” on a loader bucket. ITEM Flow Ports Amps Size Shpg. Price 9-5117-A 6 SAE 8 1.67 4½˝ x 2½˝ x 6½˝ 7 lbs. $152.95 9-7738-A 15 SAE 12 2.6 5¼˝ x 3˝ x 8⅞˝ 15 lbs. $309.95

9-7738 Series 9-5117 Series

ShuttleValveITEM 9-6361$13.95• Brand new HYDRAFORCE LSV1-6T-N.Hydraulic ball-type shuttle valve for use asa load-shuttling directional selector. Floatingball checks to the low pressure side. Com-monly used to direct oil from the high pres-sure side of a bi-directional hydraulic motorto a pressure-released hydraulic brake.SPECIFICATIONS• 7 GPM max. • Ports SAE 6• 3500 PSI • Shpg. 1 lb.

20 GPM PrinceFloatValves

$65.05 each• Brand new, PRINCE float valves. Usewith standard 4 way, 3 position valves toprovide a float or free wheeling position.Con nects inlet to both outlets when spoolis pushed in, blocks both outlets whenspool is pulled out.SPECIFICATIONS • Mnt. 2 holes on 2⅛˝ ctrs.• Flow 20 GPM max. • Size 3¾˝ x 3¼˝ x 2⅜˝• Pressure 2500 PSI max. • Shpg. 6 lbs.

ITEM Model Ports9-7899 SS-2B1D ½˝ NPT9-7900 SS-3B1D SAE 8

20 GPM SingleSelectorValves

$65.05 each• Brand new PRINCE. Two position two-way selector valves. Directs pump flow toselect between two circuits. Also use toselect between two different single actinghydraulic cylinders from one valve.SPECIFICATIONS • Two position• Flow 20 GPM • Size 5⅛˝ x 3¼˝ x 2¼˝• PSI 2500 • Shpg. 6 lbs.

ITEM Model Ports9-6133 SS-1A1D ⅜˝ NPT9-6134 SS-2A1D ½˝ NPT

DoubleSelectorValves

$102.50 each• Brand new PRINCE. Allows one controlvalve to operate two different double act-ing cylinders or reversible motors. Also useto select between two different circuitsfrom one hydraulic source. 2500 PSI.Shpg. 13 lbs. ITEM GPM Ports 9-4128 20 ½˝ NPT 9-6131 30 ¾˝ NPT 9-6132 40 1˝ NPT


$66.35 each• Brand new, CROSS high flow, single se-lector valves. Use to switch pump flowfrom one circuit to a different circuit.SPECIFICATIONS• Flow 40 GPM max. • Size 6⅛˝ x 4⅛˝ x 2⅝˝• Mount 2 holes on 3˝ ctrs. • Shpg. 8 lbs.

ITEM Model Ports PSI9-7897 VS4BKLF7 1˝ NPT 25009-7898 VS4BKLF9 SAE 16 3000


$91.50 each• Brand new, PRINCE single selectorvalves. Use to switch pump flow from onecircuit to a different circuit.SPECIFICATIONS • Mnt. 2 holes on 3⅞˝ ctrs.• Flow 30 GPM max. • Size 4⅝˝ x 4⅛˝ x 1¾˝• Pressure 3000 PSI max. • Shpg. 9 lbs.

ITEM Model Ports9-7895 RD-950 ½˝ NPT9-7896 RD-975 ¾˝ NPT



Planter MarkerValve

ITEM 9-4414$87.95• Brand new CROSS. Sequence valve de -signed to alternately operate a pair of agri-cultural guide marker cylinders on aplanter row marker system. Valve plumbsinto the lift cylinder circuit on the planter.Can be used on single or double actingmarker cylinders. 2 GPM, rated 2500 PSI,three ports SAE 8. Shpg. 6 lbs.

800-488-3407 Hydraulic Flow Control & Ball Valves 33&

NPT

SAE

ITEM PSI Ports Shpg. Price 9-7281-4 7250 ¼˝ NPT 1½ lbs. $17.95 9-7281-6 7250 ⅜˝ NPT 2 lbs. $18.95 9-7281-8 7250 ½˝ NPT 3 lbs. $20.95 9-7281-12 5800 ¾˝ NPT 5 lbs. $39.95 9-7281-16 5000 1˝ NPT 7 lbs. $46.95 9-7281-20 5000 1¼˝ NPT 8 lbs. $54.95 9-7281-24 5000 1½˝ NPT 10 lbs. $67.95 9-7281-32 5000 2˝ NPT 13 lbs. $99.20 9-7282-4 7250 SAE 4 1½ lbs. $20.95 9-7282-6 7250 SAE 6 2 lbs. $21.95 9-7282-8 7250 SAE 8 3 lbs. $24.95 9-7282-12 5800 SAE 12 5 lbs. $46.95 9-7282-16 5000 SAE 16 7 lbs. $56.95 9-7282-20 5000 SAE 20 8 lbs. $72.00 9-7282-24 5000 SAE 24 12 lbs. $72.00 9-7282-32 5000 SAE 32 15 lbs. $99.20

ITEM PSI Ports Shpg. Price9-8595-4 5880 ¼˝ NPT 1½ lbs. $ 25.609-8595-6 5880 ⅜˝ NPT 2 lbs. $ 32.009-8595-8 5145 ½˝ NPT 3 lbs. $ 40.809-8595-12 5145 ¾˝ NPT 5 lbs. $ 52.809-8595-16 5145 1˝ NPT 7 lbs. $ 67.209-8595-20 4500 1¼˝ NPT 7 lbs. $100.809-8595-24 4500 1½˝ NPT 12 lbs. $136.009-8595-32 4500 2˝ NPT 15 lbs. $128.009-8596-4 5880 SAE 4 1½ lbs. $ 25.609-8596-6 5880 SAE 6 2 lbs. $ 32.009-8596-8 5145 SAE 8 3 lbs. $ 40.809-8596-12 5145 SAE 12 5 lbs. $ 52.809-8596-16 5145 SAE 16 7 lbs. $ 67.209-8596-20 4500 SAE 20 7 lbs. $ 72.009-8596-24 4500 SAE 24 12 lbs. $128.009-8596-32 4500 SAE 32 15 lbs. $184.00

High Pressure Ball Valves• Brand new, DYNAMIC Fluid Components DE2 Series ball valves.Suitable for hydraulic and water applications. Constructed of high-carbon steel with zinc-chromate plating. Standard POM ball sealswith Buna stem seals. Temperature range -30 to 212° F.

3 Way High Pressure Ball Valves• Brand new, DYNAMIC DE Series 3-way diverter ball valve. Suit-able for hydraulic and water applications. Constructed of high-car-bon steel with zinc-chromate plating. Standard POM ball sealswith Buna stem seals.

¼˝ - 1˝ 1¼˝ - 2˝and and

SAE 4 - 16 SAE 20 - 32

SequenceValve

ITEM 9-4708$119.00• Brand new PRINCE Model RD1075SH.Use to have cylinders operate in sequence.Adjustable pilot pressure. Allows oil to bedirected toward sequence port. Checkvalve allows flow from sequence to inletport so cylinder can retract. Drain port mustbe connected to tank.SPECIFICATIONS• Inlet/Sequence • Adj. pilot 1400-2500 PSIports ¾˝ NPT • Size 6½˝ x 1¾˝ x 4˝

• Drain port ⅜˝ NPT • Shpg. 8 lbs.

Double Pilot OperatedCheckValves

$104.65 each• Brand new PRINCE. Double pilot oper-ated lock valve designed to lock a cylinderin place when control valve is in the neutralposition. Double internal pilot checks.SPECIFICATIONS• PSI 3000 • Size 5˝ x 2˝ x 1¾˝ • Shpg. 9 lbs.

ITEM Model Ports GPM9-5606-50 RD1450 ½˝ NPT 259-5606-75 RD1475 ¾˝ NPT 30

Inline Needle Valves

• Brand new, WOLVERINE by PRINCE inlineneedle valves. Designed to provide flow controlin both directions. Carbon steel body.

ITEM Model Ports PSI GPM Shpg. Price9-7961-4 WNV-400 ¼˝ NPT 5000 0-5 1 lb. $ 19.959-7961-6 WNV-600 ⅜˝ NPT 5000 0-8 2 lbs. $ 26.959-7961-8 WNV-800 ½˝ NPT 5000 0-15 3 lbs. $ 33.959-7961-12 WNV-1200 ¾˝ NPT 3000 0-25 4 lbs. $ 60.959-7961-16 WNV-1600 1˝ NPT 3000 0-40 7 lbs. $146.95

Inline Flow Control Valve• Brand new, WOLVERINE by PRINCE inlineflow control valves. Designed to provide flowcontrol and shut-off in one flow direction whileproviding free flow in the opposite direction.Color bands for easy flow adjustments andfast return to previous setting. Set screw tolock valve to any setting. Carbon steel body.

ITEM Model Ports PSI GPM Shpg. Price9-7960-4 WFC-400 ¼˝ NPT 5000 0-5 1 lb. $ 23.959-7960-6 WFC-600 ⅜˝ NPT 5000 0-8 2 lbs. $ 25.959-7960-8 WFC-800 ½˝ NPT 5000 0-15 3 lbs. $ 31.959-7960-12 WFC-1200 ¾˝ NPT 3000 0-25 4 lbs. $ 60.959-7960-16 WFC-1600 1˝ NPT 3000 0-40 7 lbs. $147.00

NPT

SAE

34 Hydraulic Flow Divider & Relief Valves www.surpluscenter.com8

60 GPM ReliefValve

ITEM 9-4704$197.65• Brand new PARKER RPL. Inline pilot op-erated relief valve.SPECIFICATIONS• 60 GPM • Ports SAE 16• Adj. 500-5000 PSI • Size 6¾˝ x 3⅜˝ x 2⅝˝• Factory set 3000 PSI • Shpg. 7 lbs.

1˝ NPT, 50 GPMHydraulicRelief Valve

ITEM 9-7901$76.95• Brand new, BUYERS PRODUCTS ModelHRV10025 inline (3 port) relief valve. Balland spring direct acting style. Cast ironbody. Three mounting holes for ⅜˝ bolts.SPECIFICATIONS• Flow rating 50 GPM max • Ports 1˝ NPT• Pressure relief range • Gauge port ¼˝ NPT1501-3000 PSI • Size 9⅜˝ x 3½˝ x 3¼˝• Factory setting 2000 PSI • Shpg. 10 lbs.

Relief Valves

$45.00 each• Brand new, PRINCE.Compact adjust able reliefvalves. Inline (3 port) con-nection. Hardened ballseat for long life.SPECIFICATIONS • 1000-2500 PSI adj. range• 2500 PSI max. • Size 1½˝ x 1½˝ x 4½˝• Adj. relief set at 1500 PSI • Shpg. 3 lbs.

ITEM Ports Max. GPM9-1556 ½˝ NPT 16 GPM9-4127 ¾˝ NPT 20 GPM

Inline Relief Valves• Brand new PRINCE. Inline relief valves. Differential poppet design provides smooth andquiet performance with a minimum variation between cracking and full pressure.SPECIFICATIONS• GPM 30 • PSI 3000 PSI • Size 3¼˝ x 2⅞˝ x 5˝ • Shpg. 5 lbs.

ITEM Model Ports Relief Range Price9-6135-50-L RV-4L ½˝ NPT 500-1500 PSI $44.959-6135-50-H RV-4H ½˝ NPT 1500-3000 PSI $44.959-6135-75-L RV-2L ¾˝ NPT 500-1500 PSI $44.959-6135-75-H RV-2H ¾˝ NPT 1500-3000 PSI $44.95

Priority ValveswithRelief

$116.00 each• Brand new PRINCE. Fixed flow prioritydi vider valve. Use to split pump output intoa fixed, priority flow and a balance flow foruse in the primary hydraulic circuit. Pres-sure relief valve on the priority port is fac-tory preset to 1500 PSI.SPECIFICATIONS• Adjustable • IN & excess ¾˝ NPT• 30 GPM max. input flow • Priority port ½˝ NPT• 3000 PSI max. • Size 4¾˝ x 4⅛˝ x 1¾˝• Relief port ⅜˝ NPT • Shpg. 9 lbs.

ITEM Model Priority Flow9-4158-1.5 RD405-R-1.5 1.5 GPM9-4158-2 RD405-R-2 2 GPM9-4158-3 RD405-R-3 3 GPM9-4158-4 RD405-R-4 4 GPM9-4158-5 RD405-R-5 5 GPM9-4158-6 RD405-R-6 6 GPM9-4158-7 RD405-R-7 7 GPM9-4158-8 RD405-R-8 8 GPM9-4158-9 RD405-R-9 9 GPM9-4158-10 RD405-R-10 10 GPM9-4158-12 RD405-R-12 12 GPM9-4158-14 RD405-R-14 14 GPM

Adjustable Flow Controls• Brand new PRINCE. Speed remains constant regardless of load. “Con trolled flow” port ispro por tional to orifice diameter that changes from full closed to full open. Pressure com-pensated OUT flows. Three female threaded ports. 3000 PSI. Size 5˝ x 4¼˝ x 3˝. Shpg. 8 lbs.With Built-in Relief• Built-in adjustable relief valve set at 1500 PSI for controlled flow circuit. ITEM Model Ports GPM Price9-064-38 RDRS137-8 ⅜˝ NPT 0-8 $93.559-064-50 RDRS150-16 ½˝ NPT 0-16 $93.559-064-75 RDRS175-30 ¾˝ NPT 0-30 $95.40

With No Relief• Ideal for closed center systems by plugging excess port.ITEM Model Ports GPM Price9-4169-8 RD108-8 SAE 8 0-8 $83.459-4169-10 RD110-16 SAE 10 0-16 $83.459-4169-12 RD112-30 SAE 12 0-30 $83.45

Proportional Flow Dividers• Brand new PRINCE. Divides flow into two equal volume outputs regardless of load vari-ations. Integral check valves allow free return flow through valve in reverse. For hydrauliccircuits or motors that operate at same speed. Not for synchronizing cylinder travel. Size4⅛˝ x 4⅝˝ x 1¾˝.ITEM Model Ports PSI GPM Shpg. Price

9-1048-A RD337-8 ⅜˝ NPT 3000 0-8 8 lbs. $106.259-1048-B RD350-16 ½˝ NPT 3000 8-16 8 lbs. $106.259-1048-C RD375-30 ¾˝ NPT 3000 16-30 8 lbs. $106.25

AdjustablePriorityFlowDividers$96.75 each• Brand new PRINCE. Adjustable constantvolume priority divider. Use in applicationswhere two circuits are to be supplied by asingle pump such as power steering sys-tems. Inlet flow is divided into two flows:priority flow which remains constant, andexcess flow to power and auxiliary circuit.Priority flow adjustable from 2 to 14 GPM.SPECIFICATIONS • Adj. priority 2-14 GPM• 30 GPM max. input • Size 5¾˝ x 4½˝ x 1¾˝• 3000 PSI • Shpg. 8 lbs.

ITEM Model Ports9-5024-38 RD537 ⅜˝ NPT9-5024-50 RD550 ½˝ NPT9-5024-75 RD575 ¾˝ NPT

Double Relief Valves• Brand new PRINCE. Cushion valve or double relief valve. Use to stop or minimize surge,shock and overload in hydraulic circuits. Installs between control valve and motor or cylin-der. Bypasses to opposite side to prevent cavitation. 30 GPM max. Size 4½˝ x 7˝ x 2˝.Shpg. 8 lbs.

ITEM Model Ports Relief Range Price9-4019-50-L DRV-4LL ½˝ NPT 500-1500 PSI $74.209-4019-50-H DRV-4HH ½˝ NPT 1500-3000 PSI $74.209-4019-75-L DRV-2LL ¾˝ NPT 500-1500 PSI $74.209-4019-75-H DRV-2HH ¾˝ NPT 1500-3000 PSI $74.20

800-488-3407 Hydraulic Check Valves 35&

NPT

SAE

Inline Check Valves• Brand new, DYNAMIC HSP series hard seat, inline checkvalves. Available with NPT or SAE ports with 5 PSI or 65 PSIcracking pressures. Plated steel.

PSI Rated WidthITEM (Max) GPM Ports (Across Flats)Length Shpg. Price

5 PSI Cracking9-7933-4-5 5000 6 ¼˝ NPT 0.87˝ 2.44˝ ½ lb. $12.959-7933-6-5 5000 10 ⅜˝ NPT 0.95˝ 2.87˝ ½ lb. $15.959-7933-8-5 5000 18 ½˝ NPT 1.14˝ 3.50˝ 1 lb. $19.959-7933-12-5 3000 30 ¾˝ NPT 1.50˝ 4.25˝ 2 lbs. $23.959-7933-16-5 3000 36 1˝ NPT 1.69˝ 5.12˝ 3 lbs. $32.959-7933-20-5 3000 50 1¼˝ NPT 2.40˝ 5.56˝ 7 lbs. $57.959-7933-24-5 3000 60 1½˝ NPT 2.56˝ 5.56˝ 8 lbs. $58.9565 PSI Cracking9-7933-4-65 5000 6 ¼˝ NPT 0.87˝ 2.44˝ ½ lb. $12.959-7933-6-65 5000 10 ⅜˝ NPT 0.95˝ 2.87˝ ½ lb. $15.959-7933-8-65 5000 18 ½˝ NPT 1.14˝ 3.50˝ 1 lb. $19.959-7933-12-65 3000 30 ¾˝ NPT 1.50˝ 4.25˝ 2 lbs. $23.959-7933-16-65 3000 36 1˝ NPT 1.69˝ 5.12˝ 3 lbs. $32.959-7933-20-65 3000 50 1¼˝ NPT 2.40˝ 5.56˝ 7 lbs. $57.959-7933-24-65 3000 60 1½˝ NPT 2.56˝ 5.56˝ 8 lbs. $58.95

PSI Rated WidthITEM (Max) GPM Ports (Across Flats)Length Shpg. Price

5 PSI Cracking9-7934-4-5 5000 6 SAE 4 0.87˝ 2.56˝ ½ lb. $14.959-7934-6-5 5000 10 SAE 6 0.94˝ 2.91˝ ½ lb. $16.959-7934-8-5 5000 18 SAE 8 1.18˝ 3.74˝ 1 lb. $17.959-7934-12-5 3000 30 SAE 12 1.50˝ 4.29˝ 2 lbs. $25.959-7934-16-5 3000 36 SAE 16 1.81˝ 5.00˝ 3 lbs. $36.009-7934-20-5 3000 50 SAE 20 2.41˝ 5.20˝ 7 lbs. $58.959-7934-24-5 3000 60 SAE 24 2.56˝ 5.20˝ 8 lbs. $59.9565 PSI Cracking9-7934-4-65 5000 6 SAE 4 0.87˝ 2.56˝ ½ lb. $14.959-7934-6-65 5000 10 SAE 6 0.94˝ 2.91˝ ½ lb. $16.959-7934-8-65 5000 18 SAE 8 1.18˝ 3.74˝ 1 lb. $17.959-7934-12-65 3000 30 SAE 12 1.50˝ 4.29˝ 2 lbs. $25.959-7934-16-65 3000 36 SAE 16 1.81˝ 5.00˝ 3 lbs. $36.959-7934-20-65 3000 50 SAE 20 2.41˝ 5.20˝ 7 lbs. $58.959-7934-24-65 3000 60 SAE 24 2.56˝ 5.20˝ 8 lbs. $59.95

MTE Rotary Flow Dividers• Brand new, MTE 200 series. Hydraulic gear type rotary flow di-viders. Accurately divide flow from one source into two or moreequal proportionate flows. Relief valves do not limit system pres-sure, they only limit differential pressure from outlets to inlet.

SPECIFICATIONS• Adj. relief valve set at 750 PSI • Adj. range 500 to 1000 PSI • PSI max.: Inlet 3000, Outlet 3500 • Factory set PSI differential between sections 750 PSI

2 Section 50:50 DividersInput GPM Output GPM Per Section Ports

ITEM Displ. Min. Max. Min. Max. Inlet Outlet Size Shpg. Price9-8402-2 0.11 1.8 4.2 0.9 2.1 SAE 8 SAE 8 6.49˝ x 3.94˝ x 4.66˝ 11 lbs. $187.959-8403-2 0.251 4.3 9.7 2.2 4.8 SAE 10 SAE 10 7.08˝ x 3.94˝ x 4.66˝ 12 lbs. $194.959-8404-2 0.323 5.9 12.5 2.8 6.3 SAE 10 SAE 10 7.38˝ x 3.94˝ x 4.66˝ 13 lbs. $197.959-8405-2 0.479 8.3 18.6 4.1 9.3 SAE 10 SAE 10 8.03˝ x 3.94˝ x 4.66˝ 15 lbs. $203.954 Section 25:25:25:25

Input GPM Output GPM Per Section PortsITEM Displ. Min. Max. Min. Max. Inlet Outlet Size Shpg. Price

9-8402-4 0.11 3.8 8.6 0.95 2.1 SAE 8 SAE 8 9.77˝ x 3.94˝ x 4.66˝ 19 lbs. $370.959-8403-4 0.251 8.6 19.5 2.2 4.9 SAE 10 SAE 8 10.94˝ x 3.94˝ x 4.66˝ 21 lbs. $386.959-8404-4 0.323 11.2 25.7 2.8 6.3 SAE 10 SAE 8 11.55˝ x 3.94˝ x 4.66˝ 22 lbs. $390.959-8405-4 0.479 16.6 37.3 4.1 9.3 SAE 10 SAE 8 12.84˝ x 3.94˝ x 4.66˝ 26 lbs. $396.70

• Brand new, pilot operated check valves.In one direction oil passes freely throughthe valve to the cylinder. In the other direc-tion flow is blocked in the cylinder by thevalve until pressure is applied at the pilotport allowing flow from the cylinder backthrough the valve.

SPECIFICATIONS• Max. 3000 PSI • Decompression ratio 16:1• Max. 20 GPM inlet • Size 513/16˝ x 1½˝ x 2½˝• Pilot ratio 4:1 • Shpg. 3 lbs.

ITEM 9-8407-8 $87.90• Model RD-1608. Ports SAE 8, pilot portSAE 4.

ITEM 9-8407-38 $93.20• Model RD-1637. Ports ⅜˝ NPT, pilot port¼˝ NPT.

ITEM 9-8407-50 $93.20• Model RD-1650. Ports ½˝ NPT, pilot port¼˝ NPT.

ITEM 9-8408-38 $50.95SPECIFICATIONS • Max. pressure 3000 PSI• Model PC37C • Max. flow 8 GPM• Inlet port ⅜˝ NPT female • Pilot ratio 4:1• Outlet port ⅜˝ NPT male • Size 37/16˝ x ⅝˝ x 19/16˝• Pilot port ¼˝ NPT • Shpg. 1½ lbs.

ITEM 9-8408-50 $53.50SPECIFICATIONS • Max. pressure 3000 PSI• Model PC50C • Max. flow 16 GPM• Inlet port ½˝ NPT female • Pilot ratio 4:1• Outlet port ½˝ NPT male • Size 315/16˝ x ¾˝ x 129/32˝• Pilot port ¼˝ NPT • Shpg. 1½ lbs.

Pilot OperatedCheck Valves

36 Hydraulic Steering Valves www.surpluscenter.com8

4.5 cu.in. ClosedCenterSteeringValve

ITEM 9-8504-45 $562.65• Brand new power steering valve fromChar-Lynn. For use with standard 12 toothsplined steering columns. 2,500 PSI maxpressure. Closed center. Four ⅜-16mounting holes on 3¼˝ B.C. Non load re-action - Steering cylinder ports areblocked in neutral, locking the axle posi-tion when the operator releases the steer-ing wheel.SPECIFICATIONS • Load circuit non load reaction• Model 212-1001 • Ports SAE 8• Displ. 4.5 cu. in. • Size 5¼˝ x 3⅜˝ x 3¾˝• Rated input flow 6 GPM • Shpg. 13 lbs.

Series 2 Column

ITEM 9-5192 $57.50• New CHAR-LYNN 204-3016. Steeringcolumn. For Series 2 valves only. 12 toothspline shaft and 4 hole, 2.323˝ diam. boltcircle mounts directly to Char-Lynn Series2 valves. 0.858˝ diam. serrated end forsteering wheel, threaded for locknut. 30¼˝lgth. Overall lgth. 323/16˝. Shpg. 8 lbs.

17˝ SteeringWheelITEM 9-6560$163.35• Brand new. Made foruse with steeringcolumns of hydraulic powersteering valves. Black molded plastic withfinger grips around the outside of thewheel. Hub fits over 36 tooth 0.858˝ steer-ing column shaft. Flat dish. Does not in-clude nut for column or center cap. 17˝diam. 2¾˝ hub depth. Shpg. 5 lbs.

Steering Column NutITEM 9-6560-N Shpg. ¼ lb. $8.30Steering Column Cap

ITEM 9-6560-C Shpg. ¼ lb. $37.95

Char-Lynn Torque Generators• Brand new CHAR-LYNN torque gen e ra tors. Con nect directly tosteering shaft on manual steering systems for power assist tothe steering linkage. Also use for manually operated gates,control valves, other situations requiring powerful rotarymotion from low input. Made to be mounted with no axialor radial loads on either shaft, not made for use with a piniongear or sprocket. Gerotor power element.SPECIFICATIONS FOR ALL• PSI 1000 max. • 50 lb. max. output shaft side-load• Input torque 14-22 in-lb. • Shafts ⅞˝ diam. x 1½˝, w/woodruff key & 5/16˝ diam. thru-hole• Ports SAE 6 • Three 5/16˝-18 mtg. holes on 2½˝ B.C. on input end

Displ. Input Output TorqueITEM Model cu. in. GPM RPM at 1000 PSI Size Shpg. Price9-7122 217-1049 4.7 3 125 550 in-lb. 63/16˝ x 3⅝˝ x 313/32˝ 10 lbs. $671.859-7123 217-1050 5.9 3.5 118 700 in-lb. 6⅜˝ x 3⅝˝ x 313/32˝ 10 lbs. $701.809-7124 217-1048 9.7 5 102 1100 in-lb. 6¾˝ x 3⅝˝ x 313/32˝ 11 lbs. $700.65

Char-Lynn Steering Valves• Brand new Char-Lynn power steering valves. Use with standard 12 tooth splined steering columns.2500 PSI max. pressure. Open center. Four ⅜˝-16 mounting holes on 3¼˝ B.C.• Available in two different load circuit options:

Non load reaction - Steering cylinder ports blocked in neutral, locking axle position when operatorreleases steering wheel.Load Reaction - Steering cylinder ports are tied together in neutral, allowing axle forces to returnsteering wheel to original position when wheel is released (similar to steering in an automobile).

Non Load Reaction Load Reaction ITEM Model ITEM Model Displ. GPM Ports Size Shpg. Price 9-1880 211-1001 N/A N/A 4.5 2-4 SAE 6 5¼˝ x 3⅜˝ x 3¾˝ 14 lbs. $569.30 9-7110 211-1002 N/A N/A 5.9 2-4 SAE 6 5⅜˝ x 3⅜˝ x 3¾˝ 14 lbs. $569.30 9-7111 211-1003 N/A N/A 7.3 2-4 SAE 6 5½˝ x 3⅜˝ x 3¾˝ 14 lbs. $575.95 9-7112 211-1157 N/A N/A 8.9 2-4 SAE 6 5⅝˝ x 3⅜˝ x 3¾˝ 14 lbs. $586.30 9-7113 211-1007 9-7099 211-1047 4.5 4-8 SAE 8 5¼˝ x 3⅜˝ x 3¾˝ 13 lbs. $576.70 9-1881 211-1008 9-7100 211-1048 5.9 4-8 SAE 8 5⅜˝ x 3⅜˝ x 3¾˝ 13 lbs. $576.70 9-7114 211-1009 9-7101 211-1049 7.3 4-8 SAE 8 5½˝ x 3⅜˝ x 3¾˝ 13 lbs. $583.35 9-7115 211-1137 9-7102 211-1159 8.9 4-8 SAE 8 5⅝˝ x 3⅜˝ x 3¾˝ 14 lbs. $593.65 9-1882 211-1010 9-7103 211-1050 9.7 4-8 SAE 8 5¾˝ x 3⅜˝ x 3¾˝ 14 lbs. $598.85 9-1883 211-1011 9-7104 211-1051 11.3 4-8 SAE 8 5⅞˝ x 3⅜˝ x 3¾˝ 14 lbs. $616.55 9-1884 211-1012 9-7105 211-1052 14.1 4-8 SAE 8 6⅛˝ x 3⅜˝ x 3¾˝ 15 lbs. $634.30 9-7116 211-1158 N/A N/A 17.9 4-8 SAE 8 6¾˝ x 3⅜˝ x 3¾˝ 15 lbs. $644.60 9-1801 211-1167 N/A N/A 17.9 8-16 SAE 8 6¾˝ x 3⅜˝ x 3¾˝ 15 lbs. $670.45 9-1802 211-1177 N/A N/A 23.8 8-16 SAE 8 6⅞˝ x 3⅜˝ x 3¾˝ 16 lbs. $719.25 9-1803 211-1178 N/A N/A 29.7 8-16 SAE 8 7½˝ x 3⅜˝ x 3¾˝ 17 lbs. $757.10 9-1804 211-1160 N/A N/A 35.6 8-16 SAE 8 8⅛˝ x 3⅜˝ x 3¾˝ 19 lbs. $805.90 9-1805 211-1179 N/A N/A 47.5 8-16 SAE 8 8⅞˝ x 3⅜˝ x 3¾˝ 21 lbs. $932.55

Char-Lynn SteeringColumns

• Brand new Char-Lynn. Direct bolt toChar-Lynn, Dan foss or Von Ruden steeringvalves with 12 T internal spline. All have0.858˝ dia. 36 T serrated end for steeringwheel, threaded for lock nut. Horn wire.

ITEM Lgth. Shpg. Price 9-1885 2½˝ 3 lbs. $ 93.80 9-1886 6˝ 3 lbs. $110.10 9-1887 12˝ 4 lbs. $129.90 9-8018 18˝ 5 lbs. $147.90 9-8019 30˝ 7 lbs. $163.80

Length

Find double rod steeringcylinders on page 56

800-488-3407 Hydraulic SPX Stone Powerpacks 37&

2 HP 230 VACHyd. Powerpack

ITEM 9-7139$498.65• Brand new SPX hydraulicpowerpack ideal for use inauto mobile hoists, lifts andother applications. Car-tridge style check valve forload-holding. Momentary“ON” pushbutton switch forraising with a manual leverfor lowering. Vertical mount.SPECIFICATIONS• 2 HP TENV motor • 2300 PSI fixed relief setting• 208-230 VAC, 1 Ph. • 4 gallon plastic reservoir• Amps 15-18 (3 gallon usable)• Int. duty • Port SAE 6• 2.25 GPM at 2000 PSI • Mount verticalmax. output • Size 10½˝ x 7˝ x 31½˝

• 2300 PSI max. • Shpg. 60 lbs.

10 ft.Hand HeldRemoteControlsfor DC Powerpacks

ITEM 9-1441-S $28.80• For single acting. Shpg. 4 lbs.

ITEM 9-1441-D $45.20• For double acting. Shpg. 4 lbs.

12 VDC Snow PlowPowerpack

ITEM 9-8411 $617.65• Brand new, SPX Model DC-80SPC.Power pack with built-in 12 volt DC sole-noid valves for operating snow plows. Pro-vides power up, hold and gravity down forsingle acting cylinder blade lift plus left andright control for two single acting cylindersor one double acting cylinder for bladeangle. Horizontal mount.SPECIFICATIONS • Cross-over relief• Voltage 12 VDC valve 1500 PSI• Amperage 300 amps • Reservoir 1.5 qt. useable• Duty intermittent • Ports cylinder ¼˝ NPT• Flow 1.7 GPM at 1750 PSI • Mnt. 2 bolt base 3¼˝ c/c• Pressure 3500 PSI max. • Orientation horizontal• Main relief valve • Size 14¾˝ x 8⅛˝ x 7¼˝adj. set at 2000 PSI • Shpg. 36 lbs.

12 VDC Power Packs

9-1478 9-1480

9-1479 9-1790

• Brand new SPX STONE. Hydraulic power packs for operating hydraulic cylinders. Steel reservoirtank with inlet strainer, magnet and filtered filler/breather. Built in check valve and adjustable reliefvalve. See chart for details about control valves, tank size and pressure ratings.

SPECIFICATIONS (all models)• Flow rate 1.3 GPM at max PSI • 12 VDC motor • Needle bearings • Intermittent duty

Relief Valve Tank Size ITEM Valve Type Ports Factory Set Cap. Useable Size Shpg. Price 9-1478 Single Acting Lever Operated ⅜˝ NPT 2500 PSI 3 qt. 2.3 qt. 21˝ x 9˝ x 7˝ 38 lbs. $381.10 9-1479 Single Acting 12 Volt DC w/handheld remote SAE 6 2500 PSI 3 qt. 2.3 qt. 21˝ x 8˝ x 6˝ 39 lbs. $407.15 9-1790 Single Acting 12 Volt DC w/handheld remote SAE 6 1100 PSI 2.5 gal. 1.6 gal. 26˝ x 8˝ x 8⅜˝ 40 lbs. $431.65 9-7412 Single Acting 12 Volt DC w/handheld remote SAE 6 2500 PSI 2.5 gal. 1.6 gal. 25˝ x 87/16˝ x 8˝ 40 lbs. $434.50 9-1480 Double Acting 12 Volt DC (does not include remote) SAE 6 2500 PSI 3 qt. 2.3 qt. 21˝ x 8˝ x 7˝ 40 lbs. $426.85 9-7413 Double Acting 12 Volt DC (does not include remote) SAE 6 2500 PSI 2.5 gal. 1.6 gal. 25˝ x 8˝ x 7˝ 41 lbs. $440.75 9-7411 None (use with external valve) SAE 6 2500 PSI 2.5 gal. 1.6 gal. 25˝ x 7˝ x 8˝ 40 lbs. $386.00

2 HP 115/230 VAC Hydraulic Power Packs• Brand new, SPX hydraulic power packs. All models include motor, gear pumpand steel reservoir tank with filtered filler/breather. Horizontal mount. Select froma variety of valve options in chart below.SPECIFICATIONS (all models)• 2 HP TEFC motor • 3450 RPM • Continuous duty• 115/230 VAC, 1 Ph. • 22/11 Amps • Port(s) SAE 6

Relief Valve Tank Size ITEM Pressure/Flow Factory Set Valve Type Cap. Useable Size Shpg. Price 9-7136 2.5 GPM @ 1000 PSI 1300 PSI None (use with external valve) 4 gal. 3.03 gal. 39˝ x 9˝ x 9⅜˝ 55 lbs. $506.85 9-7137 1.3 GPM @ 2000 PSI 2500 PSI Single Acting release, 115 Volt AC 2.5 gal. 1.6 gal. 30˝ x 9˝ x 9⅜˝ 52 lbs. $539.35 9-7138 1.3 GPM @ 2000 PSI 2500 PSI Double Acting 4 way, 115 Volt AC 2.5 gal. 1.6 gal. 30˝ x 9˝ x 9⅜˝ 53 lbs. $636.95 9-7135 1.3 GPM @ 2000 PSI 2500 PSI None (use with external valve) 2.5 gal. 1.6 gal. 30˝ x 9˝ x 9⅜˝ 51 lbs. $498.65



38 Power Team 10,000 PSI Hydraulic Components www.surpluscenter.com8

Tee Gauge AdapterITEM 9-8012$36.95• Brand new, POWER TEAM 9670 teegauge adapter. For installing betweenpump and hose coupling. ⅜˝ NPT male/fe-male fitting ends with ¼˝ NPT femalegauge port. Shpg. ½ lb.

10,000 PSI, ½ HP115 VACHydraulicPumpITEM 9-8003$1739.95

• Brand new, POWER TEAM PE172 115volt AC hydraulic pump designed to oper-ate single acting cylinders. Two speed de-livery flow for fast cycle times. RemoteON/OFF pendant control with ten foot cord.Two position valve to either advance cylin-der and hold pressure with power off or ad-vance cylinder and release pressure withpower off. Valve also used to release pres-sure when in the hold pressure position.SPECIFICATIONS• Power ½ HP• Voltage 115 VAC • Operation electric• Amperage 10 amps • Reservoir size 2 gallon• Pressure 10,000 PSI • Reservoir useable 295 cu. in.• Flow • Sound level 81 dBA290 cu. in./min at 0 PSI at 10,000 PSI190 cu. in./min at 100 PSI • Outlet port ⅜˝ NPT20 cu. in./min at 5000 PSI • Size 11⅜˝ x 9¼˝ x 18½˝16 cu. in./min at 10,000 PSI • Shpg. 40 lbs.

Sidewinder Mini Jacks5 Ton

10 Ton

20 Ton

• Brand new, POWER TEAM sidewinder mini jack. Perfect addition to any tool box, thisremarkable little jack has multiple uses that are limited only by your imagination. Use itas a jack, spreader, gear puller and many other applications that a conventional jackwouldn’t fit. Jack can be operated vertically or horizontally. Handle functions in line withbase for easier use in confined spaces. Handle effort rated at capacity.

Retracted Base Saddle Handle OperationITEM Model Capacity Stroke Height Dia. Dia. # Strokes Effort Shpg. Price

9-8013 9105A 5 Ton ¾˝ 2½˝ 229/32˝ 19/64˝ 30 57 lbs. 6 lbs. $182.709-8014 9205A 5 Ton 1½˝ 3½˝ 229/32˝ 19/64˝ 38 57 lbs. 7 lbs. $348.609-8015 9210A 10 Ton 13/16˝ 4¾˝ 421/64˝ 121/32˝ 36 62 lbs. 14 lbs. $501.909-8016 9220A 20 Ton 13/16˝ 5⅛˝ 423/32˝ 25/64˝ 46 77 lbs. 20 lbs. $585.90

10,000 PSI Air Driven Hyd. Pump

ITEM 9-8000$399.95

• Brand new, POWER TEAM PA6 Model F air driven hydraulicpump designed to operate single acting cylinders. Compact,lightweight and portable for powering all types of hydraulic

equipment. Internal relief valve.SPECIFICATIONS • Flow • Sound level 85 dBA at 10,000 PSI• Air req. 40-100 PSI 78 cu. in./min at 500 PSI • Air inlet port ¼˝ NPT• Air consumption 20 CFM 29 cu. in./min at 5000 PSI • Hyd. outlet port ⅜˝ NPT• Hyd. pressure 10,000 PSI 10 cu. in./min at 10,000 PSI • Size 9½˝ x 5˝ x 7¾˝• Operation hand/foot • Reservoir size 105 cu. in. • Shpg. 18 lbs.

RSS Series• Brand new, POWER TEAM shorty series single acting hydraulic cylinder. Features include solid steel cylinder body, grooved pistontop, maximum sized spring for fast return, Power Tech plated rod and ⅜˝ NPTF female model 9796 half coupler.SPECIFICATIONS• Single acting spring return • Pressure 10,000 PSI max. • Port ⅜˝ NPT • Rod end grooved piston top • Base end flat

ITEM Model Cyl. Cap. Bore Stroke Rod Dia. Oil Cap. R. Lgth. Rod Dia. Base Dia. Shpg. Price9-8005-10-150 RSS101 10 Ton 111/16˝ 1½˝ 1½˝ 3.4 cu. in. 3½˝ 1½˝ 2¾˝ 9 lbs. $468.309-8005-20-175 RSS202 20 Ton 2⅜˝ 1¾˝ 25/32˝ 7.7 cu. in. 3¾˝ 25/32˝ 39/16˝ 13 lbs. $675.159-8005-50-238 RSS502 50 Ton 3½˝ 2⅜˝ 3⅛˝ 22.8 cu. in. 5˝ 3⅛˝ 4⅞˝ 26 lbs. $941.85C Series• Brand new, POWER TEAM general purpose single acting hydraulic cylinder. Features include solid steel cylinder body, aluminumbronze bearing for long wear and off-center loads, maximum sized spring for fast return, chrome plated rod and ⅜˝ NPTF female Model9796 half coupler. Mounting options include base mounting holes, threaded collar and threaded rod with cap.SPECIFICATIONS• Single acting spring return • Pressure 10,000 PSI max. • Rod internally threaded• Port ⅜˝ NPT • Base flat with 2 tapped holes • Collar externally threaded

Cyl. Oil Rod Rod Collar Base Thread BoltITEM Model Cap. Cap. Bore Stroke Dia. R. Lgth. Thread Thread Dia. Size Center Shpg. Price

9-8004-10-4 C104C 10 ton 9.2 cu. in. 111/16˝ 4⅛˝ 1½˝ 6¾˝ 1-8 2¼-14 2¼˝ 5/16-18 1.562˝ 10 lbs. $414.759-8004-10-6 C106C 10 ton 13.7 cu. in. 111/16˝ 6⅛˝ 1½˝ 9¾˝ 1-8 2¼-14 2¼˝ 5/16-18 1.562˝ 13 lbs. $454.659-8004-10-10 C1010C 10 ton 22.6 cu. in. 111/16˝ 10⅛˝ 1½˝ 13¾˝ 1-8 2¼-14 2¼˝ 5/16-18 1.562˝ 16 lbs. $548.109-8004-25-6 C256C 25 ton 32.2 cu. in. 29/16˝ 6¼˝ 2¼˝ 10¾˝ 1½-16 35/16-12 3⅜˝ ½-13 2.312˝ 25 lbs. $759.159-8004-55-6 C556C 55 ton 69 cu. in. 3¾˝ 6¼˝ 3⅛˝ 11⅛˝ * 5-12 5˝ ½-13 3.750˝ 54 lbs. $1297.80

Single Acting CylindersRSS Series 10 Ton 25 & 55 Ton

C Series C Series

800-488-3407 Power Team 10,000 PSI Hydraulic Components 39&

10,000 PSI,¼˝ Hose

• Brand new, POWER TEAM hose for usewith Power Team 10,000 PSI hydraulic ac-cessories. Two ply rated hose reinforcedwith two braids of high tensile steel wire.Rubber covering is oil and weather resist-ant. MSHA approved. Plastic hose guardson each end with male pipe fittings.SPECIFICATIONS • Pressure• Hose I.D. ¼˝ operating 10,000 PSI• End fittings ⅜˝ NPT burst 20,000 PSI

ITEM 9-8010-6 $57.95• Length 6 ft. Shpg. 2 lbs.

ITEM 9-8010-10 $86.05• Length 10 ft. Shpg. 4 lbs.

With Half Coupler

ITEM 9-8009 $75.95• Coupler half 9798 male. Length 6 ft.Shpg. 2 lbs.

⅜˝, 10,000 PSICoupler Accessories

• Brand new, POWER TEAM. Designedfor use up to 10000 PSI systems.Threaded union type for a secure andquick way to interchange accessories.Precision ball for tight shutoff when dis-connected.

Male Half Coupler

ITEM 9-8011-M$19.20• Model 9798 ⅜˝ NPT male half coupler.⅜˝ NPT female fitting for con nection tohose. Shpg. ¾ lb.

Coupler SetITEM 9-8011$40.75• Model 9795 ⅜˝ NPT complete couplerset with dust caps. Female half couplerhas ⅜˝ NPT male fitting to connect to ac-cessories while male half coupler has ⅜˝NPT female fitting for connection to hose.Shpg. 1½ lbs.

10,000 PSI HydraulicHandPump

ITEM 9-8002 $490.35• Brand new, POWER TEAM P59L twospeed hand operated hydraulic pump foroperating single acting cylinders. Twospeed pump allows faster cycle times byautomatically shifting into high pressureupon cylinder contact with load. Pump de-sign also reduces handle effort and in-creases efficiency. Lightweight but durablealuminum reservoir, manifold and end cap.Large release valve knob gives added con-trol for metering loads down.SPECIFICATIONS• Pressure 10,000 PSI• Flow at cu. in./stroke:low press. 0.720, high press. 0.150

• Pressure: high flow 850 PSI, low flow 10,000 PSI• Oil capacity 69 cu. in. • Outlet port ⅜˝ NPT• Oil cap. useable 66 cu. in. • Size 21˝ x 5˝ x 7˝• Operation hand • Shpg. 15 lbs.

Prince Hand Pumps• Brand new PRINCE. Hand operated hy-draulic pumps for single acting cylinders.• Quick change. Choose from three pres-sure and volume rates with 3 position ful-crum. Magnetic plug in reservoir. Can bemounted vertical or horizontal.SPECIFICATIONS• Volume and Pressure Settings • 14¾˝ handlePosition 1: 1.25 cu. in. per stroke - 1500 PSI * • IN check valvePosition 2: 0.95 cu. in. per stroke - 2000 PSI * • Release valvePosition 3: 0.60 cu. in. per stroke - 3000 PSI * • Press. port ⅜˝ NPT

* At applied force of 60-65 lbs. on handle. Pressure to 6000 PSI can be developed with more force.

TankITEM Model Capacity Size Shpg. Price9-5201 PM-HP-5-B ½ Gallon 11˝ x 10¼˝ x 7½˝ 33 lbs. $454.059-014 PM-HP-10-B 1 Gallon 16½˝ x 10¼˝ x 7½˝ 34 lbs. $483.15

Brand Hand Pumps• Brand new, BRAND. Double action handpump displaces oil on both forward and returnmotion for rapid cylinder travel. Choice of inte-gral tank (ITEM 9-4144) or port for use with ex-ternal tank (ITEM 9-3509).

SPECIFICATIONS• 0.6 cu. in./complete stroke • Adj. relief valve• 3000 PSI • Lever release• Port SAE 6

Tank SizeITEM Model Capacity (not including handle) Shpg. Price9-4144 HP61DA80 80 cu. In. 7˝ x 4½˝ 13½˝ 16 lbs. $193.709-3509 HP61DATL None * 7˝ x 4½˝ x 5½˝ 13 lbs. $197.05

* ¼˝ NPT port for use with external reservoir (not included)

Hand PumpHeads

• Hand pump head bolts to the top ofreservoir (sold separately at right).• Single acting version has large re-lease valve knob to give added controlfor metering loads down.• Double acting version has 4 way, 3position directional control valve.• Hand pump head and reservoir soldseparately.

SPECIFICATIONS• Pressure 3500 PSI • Size 279/16˝ x 2½˝ x 9¼˝ including handle• Shpg. 10 lbs. • Outlet port ⅜˝ NPT adapter installed in #4 BSPP port

Cylinder cu.-in./cycleITEM Operation Flow Price9-8436-15 SA 1.5 $127.959-8436-21 SA 2.1 $130.959-8437-15 DA 1.5 $127.959-8437-21 DA 2.1 $130.95

Hand Pump Reservoirs

9-8438-609-8438-180 9-8438-300

• Use with Wolverine hand pumps. Pump head (sold separately atleft) bolts directly to the top of reservoir. Brass breather cap in-stalled in top of reservoir.• Hand pump head and reservoir sold separately.• ITEM 9-8438-60 is aluminum construction and has base mounting holes• ITEMS 9-8438-180 and 9-8438-300 are steel and have side mounting holes

Capacity in GallonsITEM Nominal Usable Size Shpg. Price

9-8438-60 0.25 0.225 5.4˝ x 4.843˝ x 5.25˝ 4 lbs. $32.959-8438-180 0.8 0.72 5.984˝ x 3.94˝ x 9.75˝ 5 lbs. $39.959-8438-300 1.3 1.17 6.89˝ x 6.89˝ x 6.32˝ 7 lbs. $50.95

9-8436 9-8437

Wolverine Hydraulic Hand Pump Heads and Reservoirs• Brand new, WOLVERINE by PRINCE hydraulic hand pump heads and reservoirs.

• Hand pump head is sold separately from the hydraulic reservoir for greater variety of combinations.

40 Hydraulic PTO & Two Stage Pumps www.surpluscenter.com8PTO Drive Hydraulic Gear Pumps

• Brand new PRINCE. Hydraulic PTO gear pump ideal for adding hydraulic power to tractors and landscape equipment notalready equipped with hydraulic circuits. Use to power hydraulic motors, front end loaders, mowers, rotary sweepers, etc. Twoself-adjusting wear plates. Roller bearings on internally splined shaft.• Center section available in high strength aluminum alloy for standard duty cycle or high strength cast iron for high duty cycle use.• PSI 2250. Port adapters are included for hosebarb inlet and NPT outlet. Requires the addition of a restraining torque arm toprevent pump body rotation.

Cast Iron PTO Pumps with Aluminum Center Section2000 PSI Ports Inlet Ports Outlet

ITEM Model Displ. RPM Shaft GPM Input HP IN Adapter OUT Adapter Shpg. Price

9-1047-7 HC-PTO-7A 3.6 540 1⅜˝ 6T 7.1 11.9 SAE 16 1˝ SAE 12 ¾˝ 37 lbs. $501.109-1047-2 HC-PTO-2A 5.7 540 1⅜˝ 6T 11.4 18.1 SAE 16 1˝ SAE 12 ¾˝ 37 lbs. $501.109-1047-9 HC-PTO-9A 7.8 540 1⅜˝ 6T 17.1 27.4 SAE 16 1¼˝ SAE 12 ¾˝ 37 lbs. $544.259-1047-1 HC-PTO-1A 9.9 540 1⅜˝ 6T 21 32.1 SAE 16 1¼˝ SAE 12 ¾˝ 44 lbs. $522.859-1047-8 HC-PTO-8A 3.6 1000 1⅜˝ 21T 13.5 22.6 SAE 16 1˝ SAE 12 ¾˝ 37 lbs. $501.109-1047-3 HC-PTO-3A 5.7 1000 1⅜˝ 21T 22.4 34.3 SAE 16 1¼˝ SAE 12 ¾˝ 38 lbs. $501.109-5148-11 HC-P-K11 9.9 1000 1⅜˝ 21T 40 58.8 SAE 20 2˝ SAE 16 1˝ 41 lbs. $584.00

Cast Iron PTO Pumps with Cast Iron Center Section• Same as pumps above except with cast iron center section for increased wear resistance compared to alu-minum centers and is recommended when the pump will be powering a hydraulic motor.

2000 PSI Ports Inlet Ports OutletITEM Model Displ. RPM Shaft GPM Input HP IN Adapter OUT Adapter Shpg. Price

9-1047-2-C HC-PTO-2AC 5.7 540 1⅜˝ 6T 11.4 18.1 SAE 16 1˝ SAE 12 ¾˝ 48 lbs. $569.659-1047-1-C HC-PTO-1AC 9.9 540 1⅜˝ 6T 21 32.1 SAE 16 1¼˝ SAE 12 ¾˝ 58 lbs. $591.759-1047-8-C HC-PTO-8AC 3.6 1000 1⅜˝ 21T 13.5 22.6 SAE 16 1˝ SAE 12 ¾˝ 46 lbs. $569.659-1047-3-C HC-PTO-3AC 5.7 1000 1⅜˝ 21T 22.4 34.3 SAE 16 1¼˝ SAE 12 ¾˝ 48 lbs. $569.659-5148-11-C HC-P-K11C 9.9 1000 1⅜˝ 21T 40 58.8 SAE 20 2˝ SAE 16 1˝ 55 lbs. $624.45

MTE 2 Stage Hydraulic Pumps• Brand new, MTE HYDRAULICS two stage HI/LO pressure hydraulicgear pump. Ideal for applications such as log splitters, presses andother equipment where rapid movement of the cylinder at low pressureis required prior to automatically switching to the high pressure modeto meet load requirements. The change from LO to HI pressure is auto-matic with the LO stage pressure preset at 700 PSI.

SPECIFICATIONS • Rotation CW • Speed 3600 RPM max. • Rqd. filtration 25 micron• Pump type gear • Pressure 3000 PSI max. • Shaft 1½˝ long keyed

Flow (GPM) Engine Power Unloading ShaftITEM LO Stage HI Stage Required Pressure Inlet Outlet Dia. Mount Size Shpg. Price

9-7972-7 7 1.8 4 HP 500 PSI ¾˝ NPT ½˝ NPT ½˝ 4 bolt 4F17 57/16˝ x 3˝ x 311/16˝ 10 lbs. $126.959-7972-11 11 1.8 5 HP 700 PSI 1˝ Hosebarb ½˝ NPT ½˝ 4 bolt 4F17 6˝ x 4˝ x 311/16˝ 10 lbs. $129.959-7972-13 13 3 6.5 HP 500 PSI 1˝ Hosebarb ½˝ NPT ½˝ 4 bolt 4F17 6¼˝ x 4˝ x 311/16˝ 12 lbs. $139.959-7972-16 16 3 8 HP 500 PSI 1˝ Hosebarb ½˝ NPT ½˝ 4 bolt 4F17 69/16˝ x 4˝ x 311/16˝ 12 lbs. $149.959-7973 22 6.3 12 HP 500 PSI 1¼˝ Hosebarb ¾˝ NPT ⅝˝ 2 bolt SAE A 6¼˝ x 6¼˝ x 4⅝˝ 22 lbs. $330.95

Dynamic Two Stage Hydraulic Pumps• Brand new DYNAMIC, two stage HI/LO pressure hydraulic gear pumps.Ideal for applications such as log splitters, presses and other equipmentwhere rapid movement of the cylinder at low pressure is required prior to au-tomatically switching to the high pressure mode to meet load requirements.SPECIFICATIONS FOR ALL• Pump type gear • Speed 3600 RPM max. • Rqd. filtration 25 micron• Rotation CW • Unloading pressure 650 PSI • Shaft ½˝ dia. x 1½˝ keyed• Press. 3000 PSI max. • Overhung shaft load up to 90 lbs. • Mount 4 bolt USA 4F17

Flow (GPM) Engine Power ShaftITEM LO Stage HI Stage Required Inlet Outlet Dia. Mount Size Shpg. Price

9-7503-8 8 2 5 HP 1˝ Hosebarb ½˝ NPT ½˝ 4 bolt 4F17 4¾˝ x 5⅛˝ x 3⅜˝ 10 lbs. $124.959-7503-11 11 3.4 5 HP 1˝ Hosebarb ½˝ NPT ½˝ 4 bolt 4F17 5¼˝ x 5⅛˝ x 3⅜˝ 10 lbs. $126.959-7503-13 13 3.4 6.5 HP 1˝ Hosebarb ½˝ NPT ½˝ 4 bolt 4F17 59/16˝ x 5⅛˝ x 3⅜˝ 11 lbs. $131.959-7503-16 16 4 8 HP 1˝ Hosebarb ½˝ NPT ½˝ 4 bolt 4F17 6˝ x 5⅛˝ x 3⅜˝ 12 lbs. $144.959-7970 22 7 12 HP 1˝ NPT ¾˝ NPT ⅝˝ 2 bolt SAE A 69/16˝ x 6¼˝ x 411/16˝ 22 lbs. $223.959-7971 28 7 16 HP 1˝ NPT ¾˝ NPT ⅝˝ 2 bolt SAE A 69/16˝ x 6¼˝ x 411/16˝ 23 lbs. $231.95

2 Bolt SAE A

4 Bolt USA 4F17

4 Bolt USA 4F17 2 Bolt SAE A

800-488-3407 Hydraulic CRS Vane Pumps 41&

TB and TC Series Pumps• Brand new. Designed specifically for heavy duty industrial, agricultural and contractor applications. ‘‘No load’’ starting. Vanes are re-tracted until centrifugal force automatically extends them. Until they become extended no load is exerted on the engine. Ball bearingsgive maximum shaft support with minimum friction. Pump can be belt and pulley driven.

SPECIFICATIONS for All TB and TC Series• Max. 1500 PSI • Min. 300 RPM • Req’d starting 500 RPM

TB Series

TC Series

CRSV10 and CRSV20 Series Pumps• Brand new, CRS hydraulic balanced vane pumps. Cast iron construction. Ports inline with one another.Operating rotation can be field reversed. Outlet port can be field rotated any position.

SPECIFICATIONS For All CRSV Series• Min. 600 RPM • Input rotation CW • Mount SAE A 2 bolt

CRSV10 Series

CRSV10 Series

SPECIFICATIONS For TB Series• Max. RPM 1800 • Shaft ¾˝ dia. x 2½˝ w/3/16˝ keyway • Two bolt A mount • Size 7¾˝ x 5¼˝ x 5¼˝ • Shpg. 13 lbs.

CW Rotation CCW Rotation at 1500 PSI PortsITEM ITEM Model Displ. GPM HP IN OUT Price

9-1214-CW 9-1214-CCW TB-3 0.374 3.80 6.45 ¾˝ NPT ½˝ NPT $452.809-1215-CW 9-1215-CCW TB-6 1.06 9.06 11 ¾˝ NPT ½˝ NPT $452.809-1216-CW 9-1216-CCW TB-9 1.72 14.35 15.81 1˝ NPT ¾˝ NPT $452.80

932-CW 932-CCW TB-12 2.05 17.10 19.35 1˝ NPT ¾˝ NPT $452.80

TB Series Foot MountITEM 933 • Size 3¾˝ x 5⅜˝ x 6½˝. Shpg. 1½ lbs. $44.00

SPECIFICATIONS For TC Series• Max. RPM 1800 • Shaft 1˝ dia. x 2½˝ w/ ¼˝ keyway • 6 hole flange mount• Size 8¾˝ x 6½˝ x 5½˝ • Shpg. 17 lbs.

CW Rotation CCW Rotation at 1500 PSI PortsITEM ITEM Model Displ. GPM HP IN OUT Price

9-4102-CW 9-4102-CCW TC-16 3.18 24.80 22.18 1¼˝ NPT 1˝ NPT $522.30990-CW 990-CCW TC-20 3.90 31.00 29.70 1¼˝ NPT 1˝ NPT $522.30

9-1217-CW * 9-1217-CCW * TC-24 4.93 32.55 30.75 1¼˝ NPT 1˝ NPT $522.30* Max. RPM 1500

TC Series Foot MountITEM 990-A • Size 3¾˝ x 5⅜˝ x 6½˝. Shpg. 1½ lbs. $45.05

SPECIFICATIONS For CRSV10 Series• Inlet port 1˝ NPT • Outlet port ½˝ NPT • Shaft ¾˝ dia. x 1¾˝ w/ 3/16˝ key • Shpg. 15 lbs.

at Max. RPM & PSIITEM Model Displ. Max. RPM PSI GPM HP Size Price9-8532-1 CRS V10-1P1P-1C20 0.20 4800 2500 3.6 7 4⅞˝ x 5¼˝ x 4¼˝ $205.509-8532-2 CRS V10-1P2P-1C20 0.40 4500 2500 7.3 13.6 4⅞˝ x 5¼˝ x 4¼˝ $205.509-8532-3 CRS V10-1P3P-1C20 0.60 4000 2500 9.4 17.8 4⅞˝ x 5¼˝ x 4¼˝ $205.509-8532-4 CRS V10-1P4P-1C20 0.80 3400 2500 10.9 20.4 51/16˝ x 5¼˝ x 4¼˝ $205.509-8532-5 CRS V10-1P5P-1C20 1.0 3200 2500 12.8 22.8 51/16˝ x 5¼˝ x 4¼˝ $205.509-8532-6 CRS V10-1P6P-1C20 1.19 3000 2200 14.6 24.5 5¼˝ x 5¼˝ x 4¼˝ $205.509-8532-7 CRS V10-1P7P-1C20 1.39 2800 2000 16 17.9 5¼˝ x 5¼˝ x 4¼˝ $205.50

SPECIFICATIONS For CRSV20 Series• Inlet port 1¼˝ NPT • Outlet port ¾˝ NPT • Shaft ¾˝ dia. x 2.655˝ w/ 3/16˝ key • Shpg. 19 lbs.

at Max. RPM & PSIITEM Model Displ. Max. RPM PSI GPM HP Size Price9-8533-5 CRS V20-1P5P-1C11 1.0 3400 2500 13.5 24.5 53/16˝ x 5¼˝ x 51/16˝ $239.659-8533-6 CRS V20-1P6P-1C11 1.19 3400 2500 16.1 29 53/16˝ x 5¼˝ x 51/16˝ $239.659-8533-7 CRS V20-1P7P-1C11 1.39 3000 2500 16.7 29.5 57/16˝ x 5¼˝ x 51/16˝ $239.659-8533-8 CRS V20-1P8P-1C11 1.62 2800 2500 17.7 32.5 57/16˝ x 5¼˝ x 51/16˝ $239.659-8533-9 CRS V20-1P9P-1C11 1.81 2800 2500 19.8 35.5 57/16˝ x 5¼˝ x 51/16˝ $239.659-8533-10 CRS V20-1P10P-1C11 2.00 2500 2500 20.6 33.8 511/16˝ x 5¼˝ x 51/16˝ $239.659-8533-11 CRS V20-1P11P-1C11 2.22 2500 2500 22.9 37.5 511/16˝ x 5¼˝ x 51/16˝ $239.659-8533-12 CRS V20-1P12P-1C11 2.38 2400 2200 23 36 511/16˝ x 5¼˝ x 51/16˝ $239.659-8533-13 CRS V20-1P13P-1C11 2.59 2400 2200 25.9 39 511/16˝ x 5¼˝ x 51/16˝ $239.65

42 Hydraulic Gear Pumps www.surpluscenter.com8Dynamic Gear Pumps

GP-F10 Series• Brand new DYNAMIC GP-F10 hydraulic gear pumps. Aluminum housing.SPECIFICATIONS FOR GP-F10 SERIES• Mount SAE AA 2 bolt • Ports SAE 8 inlet, SAE 6 outlet • Shaft ½˝ diam. x 11/16˝ with ⅛˝ keyway

Choose pump suffix key for rotation facing shaft.

Rotation Suffix Key: -B CW (clockwise) -D CCW (counter-clockwise)

Suffix GPM at GPM at PSI RPMITEM Code Displ. 2000 RPM Max. RPM Rated Peak Rated Max. Size Shpg. Price

9-7762- ® 0.07 0.56 1.69 3190 3770 2000 6000 3¼˝ x 41/32˝ x 35/16˝ 4 lbs. $87.959-7763- ® 0.12 0.97 2.90 3190 3770 2000 6000 35/16˝ x 41/32˝ x 35/16˝ 5 lbs. $87.959-7764- ® 0.16 1.29 3.22 3190 3770 2000 5000 3⅜˝ x 41/32˝ x 35/16˝ 5 lbs. $87.959-7765- ® 0.20 1.61 4.03 3190 3770 2000 5000 3½˝ x 41/32˝ x 35/16˝ 5 lbs. $87.959-7766- ® 0.25 2.01 5.03 3045 3625 2000 5000 39/16˝ x 41/32˝ x 35/16˝ 6 lbs. $95.959-7767- ® 0.31 2.50 4.99 3045 3625 2000 4000 311/16˝ x 41/32˝ x 35/16˝ 6 lbs. $95.959-7768- ® 0.37 2.98 5.96 2900 3480 2000 4000 313/16˝ x 41/32˝ x 35/16˝ 6 lbs. $95.959-7769- ® 0.49 3.95 7.89 2900 3480 2000 4000 4˝ x 41/32˝ x 35/16˝ 7 lbs. $95.959-7770- ® 0.55 4.43 6.64 2610 3190 2000 3000 413/16˝ x 41/32˝ x 35/16˝ 8 lbs. $95.959-7771- ® 0.66 5.31 7.97 2610 3190 2000 3000 5˝ x 41/32˝ x 35/16˝ 9 lbs. $95.959-7772- ® 0.82 6.60 9.90 2610 3190 2000 3000 55/16˝ x 41/32˝ x 35/16˝ 10 lbs. $95.95

GP-F20 Series• Brand new, DYNAMIC GP-F20 hydraulic gear pumps. Aluminum housing.SPECIFICATIONS FOR GP-F20 SERIES• Mount: SAE A 2 bolt• Ports: SAE 12 inlet, SAE 10 outlet,except ITEMS 9-7795 & 9-7796 which have SAE 16 inlet, SAE 12 outlet

Pumps available in shaft sizes of⅝˝ diam. x 1¼˝ 9T spline or ⅝˝ diam. x 1¼˝ with 5/32˝ wide keywayChoose pump suffix key for shaft type and rotation facing shaft.

-A CW Splined -B CW Keyed -C CCW Splined -D CCW Keyed

Suffix GPM at GPM at PSI RPMITEM Code Displ. 2000 RPM Max. RPM Peak Rated Max. Size Shpg. Price

9-7786- ® 0.24 1.93 3.48 3650 2000 3600 3¾˝ x 5⅛˝ x 4½˝ 10 lbs. $102.959-7787- ® 0.36 2.90 5.22 3650 2000 3600 3⅞˝ x 5⅛˝ x 4½˝ 10 lbs. $102.959-7788- ® 0.48 3.87 6.96 3650 2000 3600 4˝ x 5⅛˝ x 4½˝ 10 lbs. $102.959-7789- ® 0.61 4.91 8.84 3650 2000 3600 4⅛˝ x 5⅛˝ x 4½˝ 10 lbs. $102.959-7790- ® 0.73 5.88 10.58 3650 2000 3600 4¼˝ x 5⅛˝ x 4½˝ 11 lbs. $102.959-7791- ® 0.85 6.84 12.32 3650 2000 3600 4⅜˝ x 5⅛˝ x 4½˝ 11 lbs. $107.959-7792- ® 0.97 7.81 14.06 2900 2000 3600 4½˝ x 5⅛˝ x 4½˝ 11 lbs. $109.959-7793- ® 1.22 9.82 17.68 2900 2000 3600 4¾˝ x 5⅛˝ x 4½˝ 11 lbs. $110.959-7794- ® 1.52 12.24 22.03 2900 2000 3600 51/16˝ x 5⅛˝ x 4½˝ 12 lbs. $110.959-7795- ® 1.83 14.74 26.52 2300 2000 3600 5⅜˝ x 5⅛˝ x 4½˝ 12 lbs. $110.959-7796- ® 1.95 15.70 28.26 2300 2000 3600 5¾˝ x 5⅛˝ x 4½˝ 12 lbs. $110.95

MTE Hydraulic Pumps

• Brand new, MTE hydraulic pumps. Cast iron body. Made for direct drive, noshaft side-loading. Made in USA.SPECIFICATIONS• CW Rotation • Shaft ½˝ diam. x 1½˝ w/⅛˝ keyway • 4F17 mount (1.78˝ dia. Pilot) • 3600 RPM

GPM at PSI PortsITEM Displ. 3600 RPM Cont. Int. Inlet Outlet Size Shpg. Price

9-8401-67 0.067 1.04 3000 4000 SAE 6 SAE 6 3.82˝ x 2.8˝ x 3.66˝ 5 lbs. $93.959-8401-97 0.097 1.51 3000 4000 SAE 6 SAE 6 3.89˝ x 2.8˝ x 3.66˝ 5 lbs. $95.959-8401-129 0.129 2.00 3000 4000 SAE 8 SAE 6 3.95˝ x 2.8˝ x 3.66˝ 5 lbs. $97.959-8401-192 0.192 2.98 3000 4000 SAE 8 SAE 6 4.08˝ x 2.8˝ x 3.66˝ 5 lbs. $97.959-8401-251 0.251 3.92 2300 4000 SAE 8 SAE 8 4.2˝ x 2.8˝ x 3.66˝ 5 lbs. $99.959-8401-277 0.277 4.32 2100 3500 SAE 8 SAE 8 4.26˝ x 2.8˝ x 3.66˝ 5 lbs. $100.959-8401-323 0.323 5.04 1900 3000 SAE 10 SAE 8 4.35˝ x 2.8˝ x 3.66˝ 6 lbs. $102.959-8401-434 0.434 6.76 1600 2500 SAE 10 SAE 10 4.58˝ x 2.8˝ x 3.66˝ 6 lbs. $104.959-8401-479 0.479 7.46 1300 2250 SAE 10 SAE 10 4.68˝ x 2.8˝ x 3.66˝ 6 lbs. $105.95

800-488-3407 Prince Hydraulic Gear Pumps 43&

Prince SP20 Gear Pumps• Available in CW or CCW rotation with either ⅝˝ diam. x1¼˝ keyed shaft or ⅝˝-9 tooth splined shaft. Your choiceof side or rear porting. Two bolt SAE A mounting flangewith 3¼˝ pilot diam.

Pump suffix key: -A CW splined -B CW keyed -C CCW splined -D CCW keyed Add -R for rear ported modelsState your suffix letter. Example: 9-1899-C-R is 1.22 cu. in. displ. with CCW rotation, ⅝-9 tooth shaft, rear ports.

Suffix Optional GPM at Max. Max. Inlet Port Outlet Port ITEM Code Rear Ports Displ. 2000 RPM PSI RPM Side Rear Side Rear Shpg. Price 9-1895- ® -® 0.499 4.04 3000 4000 SAE 12 SAE 16 SAE 10 SAE 12 8 lbs. $209.40 9-1896- ® -® 0.589 4.75 3000 4000 SAE 12 SAE 16 SAE 10 SAE 12 8 lbs. $209.40 9-1897- ® -® 0.677 5.63 3000 4000 SAE 12 SAE 16 SAE 10 SAE 12 8 lbs. $209.40 9-1898- ® -® 0.86 7.01 3000 4000 SAE 12 SAE 16 SAE 10 SAE 12 9 lbs. $212.65 9-1788- ® -® 0.976 7.93 3000 4000 SAE 12 SAE 16 SAE 10 SAE 12 9 lbs. $212.65 9-1899- ® -® 1.22 10.05 3000 3500 SAE 16 SAE 16 SAE 12 SAE 12 9 lbs. $225.50 9-1900- ® -® 1.403 11.6 2500 3500 SAE 16 SAE 16 SAE 12 SAE 12 9 lbs. $227.55 9-1901- ® -® 1.654 13.9 2500 3500 SAE 16 SAE 16 SAE 12 SAE 12 10 lbs. $231.40Rear ported models should not exceed 21 GPM output due to port size.

Prince SP25 Gear Pumps• Available in CW or CCW rotation with either ⅞˝ diam. x1⅝˝ keyed shaft or ⅞˝-13 tooth splined shaft. Your choiceof side or rear porting. Two bolt SAE B mounting flangewith 4˝ pilot diam.

Pump suffix key: -A CW splined -B CW keyed -C CCW splined -D CCW keyed Add -R for rear ported modelsState your suffix letter. Example: 9-7129-C-R is 2.32 cu. in. displ. with CCW rotation, ⅞-13 tooth shaft, rear ports.

Suffix Optional GPM at Max. Max. Inlet Port Outlet Port ITEM Code Rear Ports Displ. 2000 RPM PSI RPM Side Rear Side Rear Shpg. Price 9-7125- ® -® 1.141 9.39 3000 3000 SAE 16 SAE 16 SAE 12 SAE 12 12 lbs. $313.40 9-7126- ® -® 1.349 11.08 3000 3000 SAE 16 SAE 16 SAE 12 SAE 12 12 lbs. $315.05 9-7127- ® -® 1.66 13.7 3000 3000 SAE 16 SAE 16 SAE 12 SAE 12 13 lbs. $323.75 9-7128- ® -® 2.008 16.73 3000 3000 SAE 20 SAE 16 SAE 16 SAE 12 15 lbs. $325.80 9-7129- ® -® 2.318 19.08 3000 3000 SAE 20 SAE 16 SAE 16 SAE 12 16 lbs. $333.80 9-7130- ® -® 2.697 22.16 3000 3000 SAE 20 SAE 16 SAE 16 SAE 12 16 lbs. $341.85 9-7131- ® -® 3.179 26.42 2500 3000 SAE 20 SAE 16 SAE 16 SAE 12 17 lbs. $343.85 9-7132- ® -® 3.869 31.93 2500 3000 SAE 24 SAE 16 SAE 16 SAE 12 18 lbs. $351.95Rear ported models should not exceed 25 GPM output due to port size.

Completed Double Pump9-5006-D with 9-1901-C

Item Numbers forPrince SPD

Front Pumps

ITEM Displ. Price

9-5006 1.141 $403.85 9-5007 1.349 $406.25 9-5008 1.66 $412.10 9-5009 2.008 $416.00 9-5010 2.318 $422.50 9-5011 2.697 $429.85 9-5012 3.179 $439.40 9-5013 3.869 $450.75

Prince SP20 and SP25 Gear Pumps• Brand new, aluminum body hydraulic gear pumps made by Prince Mfg. Hardened steel gears and shafts. PTFE composite bearings areself lubricating and handle heavy loads, low shaft speeds. Non-symmetrical gears for low noise, less pulsation.

Build Your Own Prince Double Pump

• Brand new PRINCE. Build your own double pump by purchasing a SPD pump (special version ofthe SP25 with a rear pump mount) and then adding a SP20 as the rear pump. SPD pumps (frontsection) are only available with side ports, SP20 pumps (rear section) can have either side or rearports. See the chart at left for SPD item numbers and refer to the SP25 chart above for performanceinformation.

Pump suffix keys are the same as SP25. Note that the SP20 pump chosen for the second sectionmust be a spline shaft version in the same rotation as the front pump.

Example: Requirement is for a CCW rotation double pump with splined shaft and displacements of2.697 cu. in. for the front section and 1.22 cu. in. for the rear section. Both sections to have sideports. Purchase a 9-5011-C for the front and 9-1899-C for the rear.

44 Hydraulic Clutch & Eaton Pumps www.surpluscenter.com8

Hydraulic Clutch Pumps• Brand new. Hyd raulic pump driven by 12 volt DC clutch.For use in marine, agricultural and industrial use. Use forremote hydraulics in service trucks, boats, trucks with au-tomatic transmissions, farm tractors, snowplows, etc.SPECIFICATIONS FOR ALL• 12 VDC operation • 3000 RPM max. • Cast iron foot mount• CW rotation • Rear ports: IN SAE 16, OUT SAE 12

Three Styles AvailableV-Belt: 7˝ diam. 2 belt ½˝ A type v-belt clutch

6 Groove Serpentine: 6˝ diam., 6 groove serpentine clutch8 Groove Serpentine: 5⅞˝ diam., 8 groove serpentine clutch

V-Belt 6 Groove 8 Groove GPM at Replacement PumpsITEM # ITEM # ITEM # 2000 RPM Displ. PSI Shpg. Price ITEM Shpg. Price9-1737 9-1737-S-6 9-1737-S-8 12 GPM 1.45 cu. in. 3000 32 lbs. $629.95 9-1737-P 16 lbs. $457.559-1738 9-1738-S-6 9-1738-S-8 20 GPM 2.32 cu. in. 2200 33 lbs. $659.95 9-1738-P 16 lbs. $468.75

V-Belt

Serpentine

Replacement Pump

Eaton 25500 Gear Pumps• Brand new EATON 25500. Ideal replacement pump on many tractors, backhoes, loaders and other mobile equipment.

SPECIFICATIONS• 3000 PSI max. • Side ports • IN SAE 20, OUT SAE 12 • SAE B 2 bolt mount

Pumps available in shaft sizes of ⅞˝ diam. x 1⅝˝ 13T spline or ⅞˝ diam. x 1⅝˝ with keyway

Choose pump suffix key for shaft type and rotation facing shaft. -A CW Splined -B CW Keyed -C CCW Splined -D CCW Keyed

Suffix Displ. RPM GPM at 2500 PSI ITEM Code cu. in. Rated Max. Rated Max. Shpg. Price9-4063- ® 1.30 1800 3500 9.7 17.9 12 lbs. $407.159-4064- ® 1.55 1800 3000 10.9 18.3 13 lbs. $419.259-4065- ® 1.78 1800 3000 12.5 21.3 14 lbs. $431.409-4066- ® 2.05 1800 2750 14.4 22.5 15 lbs. $432.209-4067- ® 2.33 1800 2750 16.3 25.5 16 lbs. $436.259-4068- ® 2.61 1800 2500 18.3 26.0 17 lbs. $442.759-4069- ® 2.85 1800 2500 20.0 28.4 18 lbs. $449.209-4070- ® 3.12 1800 2500 21.9 31.1 19 lbs. $449.209-4071- ® 3.37 1800 2250 23.6 30.2 20 lbs. $449.20

Suffix Displ. RPM GPM at 2500 PSI ITEM Code cu. in. Rated Max. Rated Max. Shpg. Price9-4435- ® 0.50 1800 3600 3.9 7.8 7 lbs. $216.859-4436- ® 0.66 1800 3600 5.2 10.3 7 lbs. $216.859-4437- ® 0.84 1800 3600 6.5 13.3 7 lbs. $220.809-4438- ® 1.02 1800 3200 7.9 14.4 7 lbs. $220.809-4439- ® 1.20 1800 3200 9.4 16.3 7 lbs. $237.759-4440- ® 1.37 1800 3000 10.7 17.5 7 lbs. $237.759-4441- ® 1.54 1800 3000 12.0 20.0 7 lbs. $237.759-4442- ® 1.69 1800 3000 13.2 22.0 7 lbs. $257.359-4443- ® 1.87 1800 3000 14.6 24.1 7 lbs. $298.50

Splined

Keyed

Eaton 26000 Gear Pumps• Brand new EATON Model 26000. Replaces EATON/Cessna 26300 Series. Hydraulic gear pump. Ideal for replacement on mobileequipment and other hydraulic systems. 3000 PSI max. SAE A 2 bolt mount. Side ports, IN SAE 16, OUT SAE 10. Shaft ¾˝ diam. x 1¼˝w/keyway. Available in choice of rotations.

Choose pump suffix key for shaft type and rotation facing shaft. -B CW Keyed -D CCW Keyed

Replacement Serpentine Clutches• Shpg. 10 lbs. each

ITEM 1-2184-S-6 6 Groove $173.65ITEM 1-2184-S-8 8 Groove $167.95

Replacement V-Belt Clutch

ITEM 1-2184 $130.40• V-belt clutch. Shpg. 12 lbs.

0.27 cu. in.KubotaHyd. PumpITEM 9-9810$49.99• New, KUBOTA hydraulic pump. Alu-minum housing.SPECIFICATIONS• Disp. 0.27 cu. in. (4.4 cc) • Shaft 0.534˝ dia.• Pump Type Gear w/ 0.25˝ wide tang• Rotation CW • Inlet port ⅜˝ NPT• Mount 2 bolt on 2.893˝ ctrs. • Outlet port ¼˝ NPTw/ M10-1.5 bolt holes, • Size 2¾˝ x 3⅛˝ x 215/16˝

• 1⅜˝ dia. pilot • Shpg. 3 lbs.

800-488-3407 Hydraulic Gear & Piston Pumps 45&

Displ. Max. GPM ITEM cu. in. RPM 1500 RPM Max. Rotation Shaft Shpg. Price

9-4848-G 0.98 3000 5.7 11.9 CCW ¾˝ 11 T spline 16 lbs. $105.999-4849-C 1.22 3000 7.1 15 CCW ⅝˝ 9 T spline 17 lbs. $112.999-4849-E 1.22 3000 7.1 15 CW ¾˝ 11 T spline 17 lbs. $112.999-4849-G 1.22 3000 7.1 15 CCW ¾˝ 11 T spline 17 lbs. $112.99

Hydreco Gear Pumps• New. Aluminum gear pumps. Wide selec-tion of performance and mounting options.

SPECIFICATIONS• 3625 PSI max. • 2900 PSI working• Ports IN SAE 16, OUT SAE 10 • 2 bolt SAE A mount• Teflon lined bushings • Size 5⅛˝ x 7½˝ x 5¼˝

0.66 cu. in.GearPump

ITEM 9-4886$79.95• New CESSNA 25301 LAG.SPECIFICATIONS • Rotation CCW• Displ. 0.66 cu. in. • IN SAE 16, OUT SAE 10• 3600 RPM max. • Shaft ⅝˝ x 1⅝˝ tapered• 3000 PSI max. w/keyway & threaded end• 5.5 GPM at 2000 RPM • Size 4˝ x 5˝ x 5˝• 2 bolt SAE A mount • Shpg. 6 lbs.

1.02 cu. in.Eaton/CessnaGear PumpITEM 9-8460$139.95• New EATON Model 26006-RAN. Hy-draulic gear pump. Ideal for replacementon mobile equipment and other hydraulicsystems.SPECIFICATIONS• Model 26006-RAN • Inlet port SAE 16• Displacement 1.02 cu.in. • Outlet port SAE 10• 7.9 GPM at 1800 RPM • Shaft ⅝-9 T spline x 1¼˝• Pressure 3000 PSI max. • Rotation CW• Speed 3200 RPM max. • Size 4⅛˝ x 5⅛˝ x 5¼˝• Mount SAE A 2 bolt • Shpg. 7 lbs.

Hydraulic Gear Pumpw/ IntegralValve

ITEM 9-9881$139.95• New FENNER. Hydraulic gear pump withbuilt-in single spool, open center, springcentered, control valve ideal for operatingdouble acting cylinders. Cast iron housing.SPECIFICATIONS• Displ. 0.1 cu. in. / rev. • Mount 4 bolt USA 4F17• Rotation CCW • Shaft ⅝˝ dia. x 1½˝ keyed• Pressure 3500 PSI cont. • Inlet port SAE 8• Flow 1.6 GPM cont. • Work ports SAE 6• Speed 3450 RPM cont. • Tank port SAE 6• Relief valve setting • Size 6⅜˝ x 4˝ x 4˝3200 PSI • Shpg. 12 lbs.

Dowty High Volume Gear Pumps• New DOWTY. Aluminum housing.

Pressure balanced bushings. Field reversible.

SPECIFICATIONS FOR ALL• Shaft 1¼˝ 14 T spline• Split flange ports IN 1½˝, OUT 1¼˝• Mount Sae C four bolt

CW Rotation CCW Rotation Cu. In. Max. Max. Flow At ITEM ITEM Displ. PSI RPM 1800 RPM Max. RPM Shpg. Price

9-2069-O 9-2070-O 6.2 2800 2100 48 Gal. 56 GPM 35 lbs. $289.009-2069-R 9-2070-R 7.1 2500 2000 55 Gal. 61 GPM 34 lbs. $329.00

0.48 cu. in. CasappaHydraulicPump

ITEM 9-8724$89.95• New, CASAPPA Model PLP10-8 D0-02S0-L-OC/OB-N-EL hydraulic gearpump. Aluminum housing.SPECIFICATIONS • Mount 2 bolt SAE AA• Disp. 0.48 cu. in. / rev. • Shaft ½˝ dia. x ¾˝ long• Pump Type Gear 9T splined• Rotation CW • Inlet port SAE 10• PSI 2610 max. cont. • Outlet port SAE 8• RPM 1800 rated, 3500 max. • Size 3⅝˝ x 4˝ x 3⅛˝• GPM 3.69 rated, 7.3 max. • Shpg. 5 lbs.

Reliance John DeereHydraulicPumps

• Brand new, RELIANCE replacement pres-sure compensated radial piston pump foruse with many models of John Deere farmtractors and industrial equipment. See ourwebsite for a list of John Deere machinesthis pump is compatible with. Pump is100% new, not rebuilt or remanufacturedand has been run on test bench to checkpressures and functionality. Pump carries a1-year parts and labor warranty.SPECIFICATIONS• Pump type radial piston • Inlet port SAE 20• Rotation CCW • Inlet/return port SAE 10• Pressure 2350 PSI max. • Outlet port SAE 12• Speed 2800 RPM max. • Drain port SAE 3• Mount 4 bolt • Size 6¼˝ x 10˝ x 8˝• Shaft 1¼˝ dia. 14T spline • Shpg. 74 lbs.

ITEM 9-8095 $995.95• Model NAR94660/NAR101807. Displ. 3.0cu. in. / rev., flow 24 GPM at 1750 RPM.

ITEM 9-8564 $1149.99• Model NAR946610. Displ. 4.0 cu. in./ rev.,flow 30 GPM at 1750 RPM.New Arrivals Daily!Shaft DriveHydraulicPower Unit

ITEM 9-7549$109.95• New hydraulic power unit for log split-ters, hydraulic tools and other portableequipment. Designed for vertical input witha gas engine. No mounting bracket or cou-pler. Requires external control and pres-sure relief valves.SPECIFICATIONS • Rotation CW• Power 5 HP 3600 RPM • Ports ⅜˝ NPT pressure• Flow 2 GPM max. • Return ports ⅜˝ & ¾˝ NPT• Pressure 2500 PSI max. • Orientation vertical• Reservoir 1.1 gallons • Size 10˝ x 10˝ x 10˝• Shaft ½ ̋dia. x ⅞ ̋w/keyway • Shpg. 13 lbs.

1.24 cu. in. VariableDispl.Piston Pump

ITEM 9-8466 $699.95• New EASTON-CESSNA. Variable dis-placement closed loop piston pump. Inte-gral charge pump. Manual control shaft fordisplacement and direction change. Auxil-iary mount on rear for gear pump.SPECIFICATIONS • Work ports SAE 12• Model 70160-REN • Charge inlet port SAE 8• Displ. variable to • Auxiliary port SAE 81.24 cu.in. max. • Case drain SAE 8

• Flow 17 GPM at 3600 RPM • Mount SAE A 2 bolt• Pressure 5000 PSI cont. • Rear mount SAE A 2 bolt• Inlet charge pressure for ⅝-9 tooth spline90-150 PSI • Shaft ⅞-13T spline

• Max. speed 3600 RPM • Size 8½˝ x 6½˝ x 6˝• Rotation CW • Shpg 30 lbs.

3.0 cu. in. Dual ServoControlled Variable Displ.Axial PistonPump

ITEM 9-8608 $1095.95• New, EATON 350 Series Model AED2RB-BAVV2AVV342CHBHB00000000C45AA0CAD0BAA. This dual tandem mobile pumpis an advanced closed circuit, servo con-trolled, axial piston design for medium dutyhydrostatic circuits. Features hydraulicservo control, tapered roller bearings onshaft, needle bearings under swash plate,internal charge pump, work port reliefs,charge port relief, swash plate positionsensors and auxiliary rear pump mount.SPECIFICATIONS • Control assembly pilot• Disp. 3.00 cu. in. / rev. pressure range 72-217 PSIeach pump • Auxiliary mount

• Pump type variable piston 2 bolt SAE A for ¾˝• Rotation CW 11 tooth spline shaft• PSI 4000 cont., 5500 int. • Shaft 1¼˝ dia.• RPM 500 min., 3600 max. 14 tooth spline• GPM • Charge inlet port SAE 166 GPM min. each pump • Work ports SAE 1644 GPM max. each pump • Servo ports SAE 4

• Mount 4 bolt SAE C • Case drains SAE 10• Work port • Size 20˝ x 12˝ x 9˝relief setting 5500 PSI • Shpg. 210 lbs.

Truck freight only.

46 Hydraulic Hydrostat Pumps www.surpluscenter.com8

Variable DisplacementAxial Piston Pumps

ITEM 9-8238-L ITEM 9-8238-RRepresents Left Hand DDC Shaft Location Represents Right Hand DDC Shaft Location

• New, WHITE HYDRAULICS KP Series variable displacement axial piston pump to op-erate hydraulic wheel motors on zero turn radius equipment applications.• Features include die cast aluminum body with built-in cooling fins, roller bearing supportfor piston group, bronze coated wear plate, built-in bypass reliefs, charge pump and by-pass valve for free-wheeling equipment.• Left and Right hand pumps are determined by the location of the DDC (Direct Displace-ment Control) shaft when looking at the side of the pump with the work ports and theinput shaft facing down. Suitable for belt or direct drive.SPECIFICATIONS FOR ALL• Pump type variable piston • Mount SAE A 2 bolt • Inlet port SAE 6• PSI 1425 cont., 2125 int., 3500 peak • RPM 600 min., 3600 max. • Work ports SAE 8• Rqd. filtration 20 Micron • Oil 10cSt (60 SUS) viscosity

cu. in. DDC Shaft DrainITEM Displ. GPM Rot. Size Location Shaft Port Shpg. Price9-8238-L 1.10 15.5 CW 0.59˝ Left 17mm SAE 8 17 lbs. $119.999-8239-L 1.10 15.5 CCW 0.59˝ Left 17mm SAE 8 17 lbs. $119.999-8239-R 1.10 15.5 CCW 0.59˝ Right 17mm SAE 8 17 lbs. $119.99

0.43 cu. in. Variable TandemPiston ZTR PumpITEM 9-7686 $129.99• New, White Hydraulic manufactured by Kanzaki Model DUP-7A.Unitized dual piston pump to operate hydraulic wheel motors onzero turn radius equipment applications including turf, light con-struction and other mobile equipment. Features include die cast aluminumbody, built-in bypass reliefs and charge pump, simplified one-piece design forlimited space and ease of installation, side load rated vertical input shaft for beltdrive applications and separate control shafts to control speed and direction of motors.SPECIFICATIONS • Flow per pump (fully stroked) 6 GPM at max. speed• Disp. 0.43 cu. in. • Mount 4 bolt 108mm x 145.5mm c.c. • Inlet port SAE 8• Pump type variable piston • Shaft 15mm tapered w/keyway & 10mm-1.5 LH threaded end • Work ports SAE 8• Rotation CCW • Control shafts 12mm dia. x 15mm • Drain port SAE 6• PSI 1425 cont., 3500 int. with dual flats and pin holes • Size 7½˝ x 5¼˝ x 7˝• RPM 600 min., 3600 max.• Rqd. filtration input to charge pump • Shpg. 17 lbs.

2.81 cu. in. Displ.

ITEM 9-8558$998.95• New, REXROTH Model AA10VG45DGD2/10R-NSC60F015S. Integrated 0.53 cu. in.boost (charge) pump.SPECIFICATIONS • RPM 3300 cont., 3800 int.• Disp. 2.81 cu. in. / rev. • Size 10˝ x 10˝ x 10˝• Flow 40.2 GPM max. without shaftat 3300 RPM • Shpg. 70 lbs.

Rexroth Hydraulic Piston Pumps• New variable axial piston pumps. Ideal for use in a hydrostatic, closed circuit transmis-sion. Two pressure relief valves on the high pressure ports, setting range 3600-4650 PSI,unknown settings. Pressure cut-off valve de-strokes the swash-plate when operatingpressure reaches the set value (unknown). Direct operated, hydraulic control uses pilotpressure to control pump displacement and flow direction. Two bolt SAE A rear pumpmount accepts ⅝˝ 9T splined shaft.SPECIFICATIONS FOR BOTH• Rotation CW • Ports• PSI 4350 nominal, 5100 peak A/B work ports ¾˝ four-bolt flange, code 62• Mount 2 bolt SAE B X1/X2 pilot control ports SAE 4• Rear pump mount 2 bolt SAE A, accepts ⅝˝ 9T shaft T1/T2 case drain/fill ports SAE 10• Shaft 1˝ 15T spline, tapped ⅜˝-16 x ⅞˝ deep Suction port SAE 16

1.71 cu. in. Displ.

ITEM 9-8557$899.95• New, REXROTH Model A10VG28DGD2/10R-NSC10F013S-S. Integrated 0.37 cu.in. boost (charge) pump.SPECIFICATIONS • RPM 3900 cont., 4500 int.• Disp. 1.71 cu. in. / rev. • Size 9¼˝ x 10˝ x 8¾˝• Flow 28.8 GPM max. without shaftat 3900 RPM • Shpg. 60 lbs.



Overhung Load Adapters• Brand new, ZEROMAX overhung loadadapters. Cast iron construction. Preventswear on motor/pump components due toexternal overhung loads (axial and radial),provides solid mounting. Isolates fromcontamination in harsh environments. Al-lows removal of motor/pump while leavingload attached to shaft. Grease zerk forbearings.

Four Hole Input Mount on 3¼˝ B.C.SPECIFICATIONS• Output shaft 1˝ dia. x 2¾˝ w/ ¼˝ keyway• Base mount four 3/16-16 tapped holes, 25/16˝ x 1¾˝• Max. speed 4400 RPM• Ball bearings• Size 3½˝ x 2¾˝ x 3⅞˝• Shpg. 9 lbs.

ITEM Input Shaft Price13-1561 1˝ dia. keyed $283.65

SAE A 2 Bolt Input MountSPECIFICATIONS• Output shaft 1˝ dia. x 2¾˝ w/ ¼˝ keyway• Base mount four 3/16-16 tapped holes, 25/16˝ x 1¾˝• Max. speed 4400 RPM• Ball bearings• Size 5½˝ x 2¾˝ x 4⅛˝• Shpg. 12 lbs.

ITEM Input Shaft Price13-1562-A 1˝ dia. keyed $283.6513-1562-B ⅝˝ dia. keyed $283.6513-1562-C ¾˝ dia. keyed $283.65

SAE B 2/4 Bolt Input MountSPECIFICATIONS• Output shaft 1½˝ dia. x 2½˝ w/ ⅜˝ keyway• Base mount four 7/16-14 tapped holes, 37/16˝ x 3˝• Max. speed 3300 RPM• Tapered roller bearings• Size 7˝ x 4½˝ x 5⅛˝• Shpg. 30 lbs.

ITEM Input Shaft Price13-1563-A ⅞-13 spline $597.7513-1563-B ⅞˝ dia. keyed $597.75

800-488-3407 Hydraulic Pump Mounts 47&

Cast IronFoot Mounts

• Brand new, cast iron footmounts for hydraulicpumps or motors.

9-K2 9-HB-A 9-HB-B 9-HB-C

Pump Pilot Bolt CenterlineITEM Mount Dia. Holes Height Size Shpg. Price

9-K2 SAE A (43/16˝ c/c) 3¼˝ ⅜-16 4½˝ 5⅛˝ x 2¼˝ x 6½˝ 5 lbs. $ 76.309-HB-A SAE A (43/16˝ c/c) 3¼˝ ⅜-16 2¾˝ 6¼˝ x 4˝ x 5½˝ 6 lbs. $ 63.809-HB-B SAE B (5¾˝ c/c) 4˝ ½-13 3⅝˝ 7˝ x 3¾˝ x 7¼˝ 9 lbs. $ 78.759-HB-C SAE C (7⅛˝ c/c) 5˝ ⅝-11 45/16˝ 10½˝ x 5¼˝ x 8½˝ 16 lbs. $113.55

Hydraulic Pump Mounts• Brand new, Hydra-Mount aluminum alloy pump mounts. Available as foot mounts, andadapters from gas engines or electric motors to a variety of common pump flanges.

Foot MountsPilot Centerline

ITEM Pump Flange Dia. Height Size Shpg. Price1-3242 4F17 (2˝ sq.) 1.78˝ 37/16˝ 3⅞˝ x 1½˝ x 4¾˝ 2 lbs. $22.951-3243 SAE AA (2 bolt, 3¼˝ c/c) 2˝ 37/16˝ 3⅞˝ x 1½˝ x 4¾˝ 2 lbs. $27.951-3244 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 3¼˝ 5⅛˝ x 4⅛˝ x 5¾˝ 3 lbs. $29.951-3245 SAE B (2 bolt, 5¾˝ c/c) 4˝ 5¼˝ 5½˝ x 3˝ x 8˝ 4 lbs. $38.95

Electric Motor to Pump MountsPilot Total

ITEM Pump Flange Dia. Motor Frame Length Shpg. Price1-3246 4F17 (2˝ sq.) 1.78˝ 56C, 143TC, 145TC 4¼˝ 5 lbs. $35.951-3247 SAE AA (2 bolt, 3¼˝ c/c) 2˝ 56C, 143TC, 145TC 4¼˝ 5 lbs. $35.951-3895 SAE AA (2 bolt, 3¼˝ c/c) 2˝ 56C, 143TC, 145TC 3½˝ 3 lbs. $31.951-3248 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 56C, 143TC, 145TC 4¼˝ 5 lbs. $35.95

1-3713-5.81 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 182TC, 184TC, 213TC 5.81˝ 5 lbs. $40.95215TC, 254TC, 256TC

1-3437* SAE B (2 bolt, 5¾˝ c/c) 4˝ 284TC, 286TC 8˝ 14 lbs. $49.95and (4 bolt, 4⅛˝ c/c)*not Hydra-Mount

Gas Engine to Pump MountsPilot Total

ITEM Pump Flange Dia. Engine Mount Length Shpg. Price1-3236 4F17 (2˝ sq.) 1.78˝ 3⅝˝ bolt circle, 1⅝˝ pilot 4.44˝ 2 lbs. $28.951-3239 4F17 (2˝ sq.) 1.78˝ 6½˝ bolt circle, 5¾˝ pilot 5⅝˝ 4 lbs. $42.951-3237 SAE AA (2 bolt, 3¼˝ c/c) 2˝ 3⅝˝ bolt circle, 1⅝˝ pilot 4.44˝ 2 lbs. $34.951-3240 SAE AA (2 bolt, 3¼˝ c/c) 2˝ 6½˝ bolt circle, 5¾˝ pilot 5˝ 4 lbs. $43.951-3238 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 3⅝˝ bolt circle, 1⅝˝ pilot 4.69˝ 2 lbs. $34.951-3712-5.63 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 6½˝ bolt circle, 5¾˝ pilot 5⅝˝ 5 lbs. $54.951-3241 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 6½˝ bolt circle, 5¾˝ pilot 5⅛˝ 4 lbs. $43.951-3712-6 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 6½˝ bolt circle, 5¾˝ pilot 6˝ 5 lbs. $54.951-3241-L SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 6½˝ bolt circle, 5¾˝ pilot 6⅝˝ 6 lbs. $64.95

48 Lynx Tie-Rod Hydraulic Cylinders www.surpluscenter.com8

SPECIFICATIONS: Ports ½˝ NPT, 1˝ dia. pins.

Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-8263-06 6˝ 1¼˝ 16¼˝ 32 lbs. $109.90 9-8263-08-S 8˝ 1¼˝ 18¼˝ 35 lbs. $114.70 9-8263-08 8˝ 1¼˝ 20¼˝ 36 lbs. $109.90 9-8263-10 10˝ 1¼˝ 20¼˝ 37 lbs. $119.35 9-8263-12 12˝ 1¼˝ 22¼˝ 40 lbs. $124.55 9-8263-14 14˝ 1½˝ 24¼˝ 45 lbs. $134.70 9-8263-16-S 16˝ 1½˝ 26¼˝ 48 lbs. $141.10 9-8263-16 * 16˝ 1½˝ 31½˝ 50 lbs. $166.30 9-8263-18 18˝ 1½˝ 28¼˝ 51 lbs. $155.45 9-8263-20 20˝ 1½˝ 30¼˝ 54 lbs. $161.70 9-8263-24 24˝ 1½˝ 34¼˝ 60 lbs. $171.10 9-8263-30 30˝ 1½˝ 40¼˝ 69 lbs. $207.50 9-8263-36 36˝ 1½˝ 46¼˝ 78 lbs. $226.80 9-8263-48 48˝ 1½˝ 58¼˝ 96 lbs. $282.75 * 1¼˝ pins


Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-8262-06 6˝ 1¼˝ 16¼˝ 25 lbs. $ 92.10 9-8262-08-S 8˝ 1¼˝ 18¼˝ 27 lbs. $ 95.10 9-8262-08 8˝ 1¼˝ 20¼˝ 28 lbs. $ 95.10 9-8262-10 10˝ 1¼˝ 20¼˝ 29 lbs. $100.05 9-8262-12 12˝ 1¼˝ 22¼˝ 32 lbs. $108.30 9-8262-14 14˝ 1¼˝ 24¼˝ 34 lbs. $114.70 9-8262-16-S 16˝ 1½˝ 26¼˝ 39 lbs. $125.85 9-8262-16 * 16˝ 1½˝ 31½˝ 41 lbs. $133.25 9-8262-18 18˝ 1½˝ 28¼˝ 41 lbs. $130.05 9-8262-20 20˝ 1½˝ 30¼˝ 44 lbs. $132.25 9-8262-24 24˝ 1½˝ 34¼˝ 49 lbs. $148.65 9-8262-30 30˝ 1½˝ 40¼˝ 56 lbs. $184.15 9-8262-36 36˝ 1½˝ 46¼˝ 63 lbs. $209.65 9-8262-48 48˝ 1½˝ 58¼˝ 78 lbs. $259.25 * 1¼˝ pins

3˝

BORE

3½˝

BORE

SPECIFICATIONS: Ports ⅜˝ NPT, 1˝ dia. pins.

Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-8261-06 6˝ 1⅛˝ 16¼˝ 18 lbs. $ 86.70 9-8261-08-S 8˝ 1⅛˝ 18¼˝ 20 lbs. $ 88.00 9-8261-08 8˝ 1⅛˝ 20¼˝ 21 lbs. $ 87.30 9-8261-10 10˝ 1⅛˝ 20¼˝ 22 lbs. $ 92.65 9-8261-12 12˝ 1⅛˝ 22¼˝ 23 lbs. $ 96.55 9-8261-14 14˝ 1⅛˝ 24¼˝ 26 lbs. $101.80 9-8261-16 16˝ 1¼˝ 26¼˝ 27 lbs. $112.10 9-8261-18 18˝ 1¼˝ 28¼˝ 29 lbs. $111.95 9-8261-20 20˝ 1¼˝ 30¼˝ 31 lbs. $116.45 9-8261-24 24˝ 1¼˝ 34¼˝ 35 lbs. $128.75 9-8261-30 30˝ 1¼˝ 40¼˝ 40 lbs. $151.10 9-8261-36 36˝ 1¼˝ 46¼˝ 45 lbs. $166.15 9-8261-48 48˝ 1¼˝ 58¼˝ 56 lbs. $203.00

SPECIFICATIONS: Ports ⅜˝ NPT, 1˝ dia. pins.

Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-8260-06 6˝ 1⅛˝ 16¼˝ 16 lbs. $ 83.40 9-8260-08-S 8˝ 1⅛˝ 18¼˝ 18 lbs. $ 85.25 9-8260-08 8˝ 1⅛˝ 20¼˝ 18 lbs. $ 82.80 9-8260-10 10˝ 1⅛˝ 20¼˝ 19 lbs. $ 87.30 9-8260-12 12˝ 1⅛˝ 22¼˝ 20 lbs. $ 90.35 9-8260-14 14˝ 1⅛˝ 24¼˝ 22 lbs. $ 94.25 9-8260-16 16˝ 1⅛˝ 26¼˝ 24 lbs. $ 97.30 9-8260-18 18˝ 1⅛˝ 28¼˝ 25 lbs. $102.80 9-8260-20 20˝ 1⅛˝ 30¼˝ 27 lbs. $109.60 9-8260-24 24˝ 1⅛˝ 34¼˝ 30 lbs. $125.55 9-8260-30 30˝ 1⅛˝ 40¼˝ 34 lbs. $149.50 9-8260-36 36˝ 1⅛˝ 46¼˝ 39 lbs. $157.35 9-8260-48 48˝ 1⅛˝ 58¼˝ 48 lbs. $195.90

2˝

BORE

2½˝

BORE

• Brand new, LYNX LH3000 by Lion Hydraulics. Supe-rior quality double acting tie-rod cylinders built for

years of service in demanding applications. 3000 PSI.

Dimensional Data for Lion TH Cylinders Throat Depth Thread Bore A B C D E F G

2˝ 2⅛˝ 21/16˝ 1⅛˝ 2½˝ 2⅜˝ 1⅛˝-12 UNF 2¾˝2½˝ 2⅛˝ 21/16˝ 1⅛˝ 2½˝ 2½˝ 1⅛˝-12 UNF 3⅛˝3˝ 2⅛˝ 21/16˝ 1⅛˝ 2⅝˝ 29/16˝ 1¼˝-12 UNF 3¾˝3½˝ 2⅛˝ 21/16˝ 1⅛˝ 2⅝˝ 29/16˝ 1¼˝-12 UNF 4½˝4˝ 2⅛˝ 21/16˝ 1⅛˝ 2⅝˝ 2⅝˝ 1¼˝-12 UNF 5⅛˝5˝ 2⅛˝ 2¼˝ 13/16˝ * 3˝ 3½˝ 1½˝-12 6˝

* Base end measure 15/16˝

800-488-3407 Lynx Tie-Rod Cylinders & Top Link Cylinders 49&

Self ContainedTop LinkCylinders

• Brand new, Hydraulink air over hydraulic top link cylinder. ForCategory 1. Fully self contained, no tractor hydraulics required.Easy to adjust by simply loosening needle valve, moving into po-sition and retightening. Also acts as a shock absorber for muchsmoother operation with attachments, lessening operator fatigue.Swivel eye ends. Threaded adjustment at base end.

ITEM 9-7960-1 Category 1 $185.95SPECIFICATIONS• Weight capacity 5300 lbs. • Mechanical adjust. 2¾˝ • Retracted lgth. 19¼˝ to 28˝• Bore 1½˝ • Total adjust. range 8¾˝ • Overall size 21˝ x 1½˝ x 4˝• Hydraulic stroke 6˝ • Pin holes ¾˝ dia. • Shpg. 13 lbs.

ITEM 9-7960-2 Category 2 $227.95SPECIFICATIONS• Weight capacity 9400 lbs. • Mechanical adjust. 5¾˝ • Adjustable lgth. 22¼˝ to 34˝• Bore 2˝ • Total adjust. range 11¾˝ • Overall size 25˝ x 2⅜˝ x 4½˝• Hydraulic stroke 6˝ • Pin holes 1˝ dia. • Shpg. 22 lbs.

Category 1 Top Link Cylinders

• Brand new, AMA category 1 top link cylinder. Use in place oftop link on three point hitches for adjusting implement. Built-inlock valve to prevent cylinder drift. Ships with two ⅜˝ BSPPM to⅜˝ NPTM connectors.

ITEM 9-7682-08 $189.95SPECIFICATIONS• Double acting • Rod dia. 13/16˝ • Swivel eye ends 1¾˝ w.• Bore x Stroke 2˝ x 8¼˝ • Ports ⅜˝ BSPP • Pin holes ¾˝• Pressure 3000 • Retracted lgth. 18⅛˝ • Shpg. 18 lbs.

ITEM 9-7682-11 $203.95SPECIFICATIONS• Double acting • Rod dia. 13/16˝ • Swivel eye ends 1¾˝ w.• Bore x Stroke 2˝ x 11˝ • Ports ⅜˝ BSPP • Pin holes ¾˝• Pressure 3000 • Retracted lgth. 20⅞˝ • Shpg. 20 lbs.

3˝ x 8˝ x 1½˝ Top Link Cylinder

ITEM 9-5152$220.10• Brand new. Self aligning swivel eye at each end.SPECIFICATIONS• Double acting • Rod diam. 1½˝ • Swivel eye ends 1¾˝ w.• Bore/stroke 3˝ x 8˝ • Ports ½˝ NPT • Pin holes 1˝• 3000 PSI • Retracted lgth. 19½˝ • Shpg. 27 lbs.

3˝ x 8˝ x 1½˝ Top Link Cylinder

ITEM 9-5196$236.95• Brand new. Use on tractors in place of top link on three pointhitches to adjust implement. Double swivel adapter on base ofcylinder to provide vertical and horizontal movement of hitch.SPECIFICATIONS• Double acting • Ports ½˝ NPT • Single eye rod• Bore/stroke 3˝ x 8˝ • Retracted lgth. 22˝ w/self aligning width 1¾˝• 3000 PSI • Pin holes 1˝ • Double swivel base• Rod diam. 1½˝ • Shpg. 29 lbs. assembly - width 2˝

Control With Tractor Remote


Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-8264-06 6˝ 1½˝ 16¼˝ 39 lbs. $134.70 9-8264-08-S 8˝ 1½˝ 18¼˝ 42 lbs. $139.50 9-8264-08 8˝ 1½˝ 20¼˝ 43 lbs. $127.90 9-8264-10 10˝ 1½˝ 20¼˝ 46 lbs. $144.30 9-8264-12 12˝ 1½˝ 22¼˝ 49 lbs. $151.55 9-8264-14 14˝ 1½˝ 24¼˝ 53 lbs. $162.40 9-8264-16-S 16˝ 1¾˝ 26¼˝ 59 lbs. $173.70 9-8264-16 * 16˝ 1¾˝ 31½˝ 61 lbs. $194.90 9-8264-18 18˝ 1¾˝ 28¼˝ 62 lbs. $189.10 9-8264-20 20˝ 1¾˝ 30¼˝ 66 lbs. $195.15 9-8264-24-150 24˝ 1½˝ 34¼˝ 69 lbs. $197.50 9-8264-24-175 24˝ 1¾˝ 34¼˝ 74 lbs. $214.30 9-8264-24-200 24˝ 2˝ 34¼˝ 79 lbs. $228.50 9-8264-30 30˝ 2˝ 40¼˝ 91 lbs. $256.95 9-8264-36 36˝ 2˝ 46¼˝ 104 lbs. $293.35 9-8264-48 48˝ 2˝ 58¼˝ 128 lbs. $360.60 * 1¼˝ pins

SPECIFICATIONS: Ports ½˝ NPT, 1¼˝ dia. pins.

Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-8265-08 8˝ 2˝ 20¼˝ 76 lbs. $238.40 9-8265-10 10˝ 2˝ 22¼˝ 80 lbs. $249.40 9-8265-12 12˝ 2˝ 24¼˝ 81 lbs. $268.55 9-8265-14 14˝ 2˝ 26¼˝ 90 lbs. $286.95 9-8265-16-S 16˝ 2˝ 28¼˝ 95 lbs. $305.10 9-8265-16 16˝ 2˝ 31½˝ 99 lbs. $315.80 9-8265-18 18˝ 2˝ 30¼˝ 100 lbs. $324.20 9-8265-20 20˝ 2˝ 32¼˝ 105 lbs. $345.25 9-8265-24 24˝ 2˝ 36¼˝ 115 lbs. $369.30 9-8265-30 30˝ 2˝ 42¼˝ 130 lbs. $403.25 9-8265-36 36˝ 2˝ 48¼˝ 145 lbs. $445.00 9-8265-48 * 48˝ 2˝ 58¼˝ 175 lbs. $535.50 * 1¼˝ pins

5˝

BORE

4˝

BORE

• Brand new, LYNX LH3000 by Lion Hydraulics. Supe-rior quality double acting tie-rod cylinders built for

years of service in demanding applications. 3000 PSI.

Dimensional Data for Lion TH Cylinders Throat Depth Thread Bore A B C D E F G

2˝ 2⅛˝ 21/16˝ 1⅛˝ 2½˝ 2⅜˝ 1⅛˝-12 UNF 2¾˝2½˝ 2⅛˝ 21/16˝ 1⅛˝ 2½˝ 2½˝ 1⅛˝-12 UNF 3⅛˝3˝ 2⅛˝ 21/16˝ 1⅛˝ 2⅝˝ 29/16˝ 1¼˝-12 UNF 3¾˝3½˝ 2⅛˝ 21/16˝ 1⅛˝ 2⅝˝ 29/16˝ 1¼˝-12 UNF 4½˝4˝ 2⅛˝ 21/16˝ 1⅛˝ 2⅝˝ 2⅝˝ 1¼˝-12 UNF 5⅛˝5˝ 2⅛˝ 2¼˝ 13/16˝ * 3˝ 3½˝ 1½˝-12 6˝

* Base end measure 15/16˝

Top Link Cylinders

50 Prince Royal Plate Plus Tie-Rod Hydraulic Cylinders www.surpluscenter.com8

Dimensional Data for Prince Tie Rod Cylinders

Between Throat Depth Thread Ears Bore A B C D E F G 2˝ 113/16˝ 113/16˝ 2⅜˝ 15/16˝ 1⅛˝ 1⅛˝-12 UNF-3A 1.06˝ 2½˝ 1⅞˝ 113/16˝ 213/16˝ 15/16˝ 1⅛˝ 1⅛˝-12 UNF-3A 1.06˝ 3˝ 1⅞˝ 113/16˝ 27/16˝ 11/16˝ 1⅛˝ 1⅛˝-12 UNF-3A 1.06˝ 3½˝ 1⅞˝ 113/16˝ 27/16˝ 1¼˝ 1¼˝ 15/16˝-12 UNF-3A 1.06˝ 4˝ 1¾˝ 1⅞˝ 27/16˝ 1¼˝ 1¼˝ 1½˝-12 UNF-3A 1.06˝ 5˝ 1¾˝ 2˝ 2⅝˝ 1⅜˝ 1¼˝ 1½˝-12 UNF-3A 1.13˝

• Brand new PRINCE Royal Plate Plus double acting tie-rod cylin-ders. Premium quality with superior materials and workmanship.The Royal Plate Plus cylinder combines two rod coatings to pro-vide excellent wear, hardness and corrosion protection.• Aircraft quality two-part polyester urethane paint that outper-forms powder coating for the life of the cylinder.• High quality seals and steel components.• 3000 PSI working pressure.• 7 year warranty against rust and corrosion.

SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.

Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-1665-08 8˝ 1⅛˝ 20¼˝ 26 lbs. $155.45 9-1665-08-S 8˝ 1⅛˝ 18¼˝ 26 lbs. $154.10 9-1665-10 10˝ 1⅛˝ 20¼˝ 26 lbs. $160.60 9-1665-12 12˝ 1⅛˝ 22¼˝ 27 lbs. $162.60 9-1665-14 14˝ 1⅛˝ 24¼˝ 28 lbs. $165.95 9-1665-16 16˝ 1⅛˝ 31½˝ 32 lbs. $173.25 9-1665-18 18˝ 1⅛˝ 28¼˝ 32 lbs. $177.70 9-1665-20 20˝ 1⅛˝ 30¼˝ 33 lbs. $183.70 9-1665-24 24˝ 1⅛˝ 34¼˝ 36 lbs. $195.50 9-1665-30 30˝ 1⅛˝ 40¼˝ 41 lbs. $213.25

2˝

BORE


Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-1513-08 8˝ 1¼˝ 20¼˝ 29 lbs. $169.45 9-1513-10 10˝ 1¼˝ 20¼˝ 30 lbs. $176.00 9-1513-12 12˝ 1¼˝ 22¼˝ 33 lbs. $183.70 9-1513-14 14˝ 1¼˝ 24¼˝ 34 lbs. $191.55 9-1513-16 16˝ 1¼˝ 31½˝ 39 lbs. $200.65 9-1513-18 18˝ 1¼˝ 28¼˝ 38 lbs. $207.20 9-1513-20 20˝ 1¼˝ 30¼˝ 40 lbs. $215.00 9-1513-24 24˝ 1¼˝ 34¼˝ 44 lbs. $230.65 9-1513-30 30˝ 1¼˝ 40¼˝ 51 lbs. $253.90

2½˝

BORE


Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-1670-08 8˝ 1⅜˝ 20¼˝ 33 lbs. $178.05 9-1670-10 10˝ 1⅜˝ 20¼˝ 34 lbs. $185.90 9-1670-12 12˝ 1⅜˝ 22¼˝ 37 lbs. $194.90 9-1670-14 14˝ 1⅜˝ 24¼˝ 39 lbs. $203.70 9-1670-16 16˝ 1⅜˝ 31½˝ 43 lbs. $214.10 9-1670-16-S 16˝ 1⅜˝ 26¼˝ 42 lbs. $212.80 9-1670-18 18˝ 1⅜˝ 28¼˝ 44 lbs. $221.65 9-1670-20 20˝ 1⅜˝ 30¼˝ 45 lbs. $230.70 9-1670-24 24˝ 1⅜˝ 34¼˝ 50 lbs. $252.90 9-1670-30 30˝ 1⅜˝ 40¼˝ 58 lbs. $287.90 9-1670-36 36˝ 1⅜˝ 46¼˝ 64 lbs. $323.00 9-1670-48 48˝ 1⅜˝ 58¼˝ 77 lbs. $397.75

3˝

BORE


Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 945-08 8˝ 1⅜˝ 20¼˝ 40 lbs. $193.20 945-10 10˝ 1⅜˝ 20¼˝ 41 lbs. $202.50 945-12 12˝ 1⅜˝ 22¼˝ 44 lbs. $214.10 945-14 14˝ 1⅜˝ 24¼˝ 47 lbs. $225.45 945-16 16˝ 1⅜˝ 31½˝ 52 lbs. $238.90 945-16-S 16˝ 1⅜˝ 26¼˝ 49 lbs. $236.85 945-18 18˝ 1⅜˝ 28¼˝ 51 lbs. $248.15 945-20 20˝ 1⅜˝ 30¼˝ 54 lbs. $259.55 945-24 24˝ 1⅜˝ 34¼˝ 59 lbs. $282.35 945-30 30˝ 1⅜˝ 40¼˝ 65 lbs. $324.65 945-36 36˝ 1⅜˝ 46¼˝ 74 lbs. $366.70 945-48 48˝ 1⅜˝ 58¼˝ 90 lbs. $451.35

3½˝

BORE


Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-1172-08 8˝ 1¾˝ 20¼˝ 55 lbs. $255.45 9-1172-10 10˝ 1¾˝ 20¼˝ 56 lbs. $266.60 9-1172-12 12˝ 1¾˝ 22¼˝ 59 lbs. $280.40 9-1172-14 14˝ 1¾˝ 24¼˝ 63 lbs. $294.00 9-1172-16 16˝ 1¾˝ 31½˝ 71 lbs. $310.15 9-1172-16-S 16˝ 1¾˝ 26¼˝ 66 lbs. $307.70 9-1172-18 18˝ 1¾˝ 28¼˝ 71 lbs. $321.40 9-1172-20 20˝ 1¾˝ 30¼˝ 74 lbs. $335.20 9-1172-24 24˝ 1¾˝ 34¼˝ 81 lbs. $354.40 9-1172-30 30˝ 1¾˝ 40¼˝ 93 lbs. $395.35 9-1172-36 36˝ 1¾˝ 46¼˝ 102 lbs. $436.45 9-1172-48 48˝ 1¾˝ 58¼˝ 125 lbs. $518.55

4˝

BORE


Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-1197-08 8˝ 2˝ 20¼˝ 77 lbs. $354.10 9-1197-12 12˝ 2˝ 24¼˝ 87 lbs. $385.05 9-1197-14 14˝ 2˝ 26¼˝ 91 lbs. $400.50 9-1197-16 16˝ 2˝ 31½˝ 102 lbs. $421.10 9-1197-18 18˝ 2˝ 30¼˝ 104 lbs. $431.40 9-1197-20 20˝ 2˝ 32¼˝ 109 lbs. $446.85 9-1197-24 24˝ 2˝ 36¼˝ 120 lbs. $468.05 9-1197-30 30˝ 2˝ 42¼˝ 134 lbs. $516.65 9-1197-36 36˝ 2˝ 48¼˝ 150 lbs. $568.35 9-1197-48 48˝ 2˝ 60¼˝ 219 lbs. $683.80

5˝

BORE

800-488-3407 Wolverine Tie-Rod Cylinders 51&

Wolverine Tie-Rod Cylinders

• Brand new, WOLVERINE by PRINCE double acting tie-rod hydraulic cylin-ders. High quality tie-rod cylinders at great savings. Black powder coatedpaint. Plated tie rods. Side port configuration in base end. 2500 PSI.

Dimensional Data for Wolverine Cylinders Throat Depth Thread Bore A B C D E F G

2˝ 2.13˝ 2.00˝ 1.13˝ 2.625˝ 2.50˝ 1⅛˝-12 UNF 2.82˝2½˝ 2.13˝ 2.00˝ 1.13˝ 2.625˝ 2.50˝ 1⅛˝-12 UNF 3.38˝3˝ 2.13˝ 2.00˝ 1.13˝ 2.625˝ 2.50˝ 1⅛˝-12 UNF 3.90˝3½˝ 2.13˝ 2.00˝ 1.13˝ 2.625˝ 2.50˝ 1¼˝-12 UNF 4.62˝4˝ 2.13˝ 2.00˝ 1.13˝ 2.625˝ 2.50˝ 1½˝-12 UNF 4.75˝


Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price

9-8534-4 4˝ 1⅛˝ 14¼˝ 18 lbs. $ 55.959-8534-6 6˝ 1⅛˝ 16¼˝ 19 lbs. $ 58.959-8534-8-S 8˝ 1⅛˝ 18¼˝ 19 lbs. $ 61.959-8534-8 8˝ 1⅛˝ 20¼˝ 20 lbs. $ 62.959-8534-10 10˝ 1⅛˝ 20¼˝ 22 lbs. $ 66.959-8534-12 12˝ 1⅛˝ 22¼˝ 23 lbs. $ 69.959-8534-14 14˝ 1⅛˝ 24¼˝ 24 lbs. $ 73.959-8534-16-S 16˝ 1⅛˝ 26¼˝ 25 lbs. $ 76.959-8534-16 16˝ 1⅛˝ 31½˝ 26 lbs. $ 86.959-8534-18 18˝ 1⅛˝ 28¼˝ 26 lbs. $ 79.959-8534-20 20˝ 1⅛˝ 30¼˝ 28 lbs. $ 83.959-8534-24 24˝ 1⅛˝ 34¼˝ 30 lbs. $ 87.959-8534-30 30˝ 1⅛˝ 40¼˝ 38 lbs. $ 94.259-8534-36 36˝ 1⅛˝ 46¼˝ 43 lbs. $105.95

2˝

BORE



9-8535-4 4˝ 1⅛˝ 14¼˝ 20 lbs. $ 63.959-8535-6 6˝ 1⅛˝ 16¼˝ 21 lbs. $ 66.959-8535-8-S 8˝ 1⅛˝ 18¼˝ 22 lbs. $ 69.959-8535-8 8˝ 1⅛˝ 20¼˝ 23 lbs. $ 70.959-8535-10 10˝ 1⅛˝ 20¼˝ 24 lbs. $ 72.959-8535-12 12˝ 1⅛˝ 22¼˝ 26 lbs. $ 76.959-8535-14 14˝ 1⅛˝ 24¼˝ 27 lbs. $ 83.959-8535-16-S 16˝ 1⅛˝ 26¼˝ 29 lbs. $ 86.959-8535-18 18˝ 1¼˝ 28¼˝ 31 lbs. $ 92.959-8535-20 20˝ 1¼˝ 30¼˝ 33 lbs. $ 94.259-8535-24 24˝ 1¼˝ 34¼˝ 36 lbs. $102.959-8535-30 30˝ 1¼˝ 40¼˝ 48 lbs. $117.959-8535-36 36˝ 1¼˝ 46¼˝ 59 lbs. $125.95

2½˝

BORE



9-8537-8 8˝ 1¼˝ 20¼˝ 35 lbs. $ 94.959-8537-10 10˝ 1¼˝ 20¼˝ 33 lbs. $ 95.959-8537-12 12˝ 1¼˝ 22¼˝ 36 lbs. $103.959-8537-14 14˝ 1¼˝ 24¼˝ 38 lbs. $108.959-8537-16-S 16˝ 1¼˝ 26¼˝ 40 lbs. $113.959-8537-16 * 16˝ 1½˝ 31½˝ 42 lbs. $116.959-8537-18 18˝ 1¼˝ 28¼˝ 43 lbs. $119.959-8537-20 20˝ 1½˝ 30¼˝ 45 lbs. $124.959-8537-24 24˝ 1½˝ 34¼˝ 54 lbs. $157.959-8537-30 30˝ 1½˝ 40¼˝ 63 lbs. $174.95

* 1¼˝ pins

3½˝

BORE



9-8536-4 4˝ 1¼˝ 14¼˝ 22 lbs. $ 68.959-8536-6 6˝ 1¼˝ 16¼˝ 27 lbs. $ 72.959-8536-8-S 8˝ 1¼˝ 18¼˝ 28 lbs. $ 75.959-8536-8 8˝ 1¼˝ 20¼˝ 29 lbs. $ 76.959-8536-10 10˝ 1¼˝ 20¼˝ 32 lbs. $ 83.959-8536-12 12˝ 1¼˝ 22¼˝ 33 lbs. $ 88.959-8536-14 14˝ 1¼˝ 24¼˝ 34 lbs. $ 90.959-8536-16-S 16˝ 1¼˝ 26¼˝ 36 lbs. $ 99.959-8536-16 * 16˝ 1½˝ 31½˝ 38 lbs. $101.959-8536-18 18˝ 1½˝ 28¼˝ 38 lbs. $104.959-8536-20 20˝ 1½˝ 30¼˝ 40 lbs. $111.959-8536-24 24˝ 1½˝ 34¼˝ 51 lbs. $119.959-8536-30 30˝ 1½˝ 40¼˝ 62 lbs. $152.959-8536-36 36˝ 1½˝ 46¼˝ 71 lbs. $169.95

* 1¼˝ pins

3˝

BORE



9-8538-4 4˝ 1½˝ 14¼˝ 32 lbs. $113.959-8538-8 8˝ 1½˝ 20¼˝ 39 lbs. $111.959-8538-10 10˝ 1½˝ 20¼˝ 40 lbs. $114.959-8538-12 12˝ 1½˝ 22¼˝ 43 lbs. $120.959-8538-14 14˝ 1½˝ 24¼˝ 44 lbs. $126.959-8538-16-S 16˝ 1½˝ 26¼˝ 51 lbs. $133.959-8538-16 * 16˝ 2˝ 31½˝ 50 lbs. $146.959-8538-18 18˝ 1½˝ 28¼˝ 54 lbs. $146.959-8538-20 20˝ 1½˝ 30¼˝ 56 lbs. $152.959-8538-24 24˝ 2˝ 34¼˝ 74 lbs. $170.759-8538-30 30˝ 2˝ 40¼˝ 91 lbs. $215.959-8538-36 36˝ 2˝ 46¼˝ 102 lbs. $243.95

* 1¼˝ pins

4˝

BORE

52 Prince Welded Hydraulic Cylinders www.surpluscenter.com8

Bore - Inside diameter of cylinder

Stroke - How far a cylinder extends out

R-length - Distance in inches between pincenters when cylinder is retracted

Rod Diameter - Diameter of cylinder rod

Single Acting - Cylinder is powered one way

Double Acting - Cylinder is powered bothways (two way)

Crosstube End - Round tube welded per-pendicular to cylinder

Single Eye End - For mounting betweentwo mounting ears.

Clevis End - Two mounting ears

Cylinder Definitions

Rod Port Base PortRod Diam.

Retracted LengthStroke

Bore

Prince “Royal” Line CylindersBrand new, double acting welded cylinders made by PRINCE MFG.

2500 PSI working pressure. Fully chromed piston rod.

Dimensional Data for Prince “Royal” Cylinders

Crosstube Width Bore A B C L1 L2

2½˝ 29/16˝ 9/16˝ ¾˝ 3˝ 1⅜˝

3˝ 25/16˝ 11/16˝ 1˝ 3½˝ 1½˝

3½˝ 111/16˝ 11/16˝ 1˝ 4˝ 1½˝

4˝ 2⅛˝ 15/16˝ 1⅛˝ 4½˝ 2˝

SPECIFICATIONS: Ports ⅜˝ NPT, ¾˝ dia. pins.

Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-1672-08 8˝ 1⅜˝ 16˝ 20 lbs. $174.80 9-1672-12 12˝ 1⅜˝ 20˝ 23 lbs. $183.70 9-1672-16 16˝ 1⅜˝ 24˝ 27 lbs. $193.15 9-1672-20 20˝ 1⅜˝ 28˝ 30 lbs. $202.10 9-1672-24 24˝ 1⅜˝ 32˝ 35 lbs. $210.65 9-1672-30 30˝ 1⅜˝ 38˝ 40 lbs. $223.75 9-1672-32 32˝ 1⅜˝ 40˝ 42 lbs. $231.40 9-1672-36 36˝ 1⅜˝ 44˝ 45 lbs. $241.05 9-1672-42 42˝ 1⅜˝ 50˝ 52 lbs. $278.30

2½˝

BORE


Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-1650-08 8˝ 1½˝ 16˝ 25 lbs. $194.70 9-1650-12 12˝ 1½˝ 20˝ 30 lbs. $211.15 9-1650-16 16˝ 1½˝ 24˝ 33 lbs. $229.50 9-1650-20 20˝ 1½˝ 28˝ 37 lbs. $245.95 9-1650-24 24˝ 1½˝ 32˝ 41 lbs. $262.15 9-1650-30 30˝ 1½˝ 38˝ 47 lbs. $286.05 9-1650-32 32˝ 1½˝ 40˝ 50 lbs. $293.75 9-1650-36 36˝ 1½˝ 44˝ 53 lbs. $309.75 9-1650-40 40˝ 1½˝ 48˝ 59 lbs. $317.75 9-1650-42 42˝ 1½˝ 50˝ 61 lbs. $325.60 9-1650-48 48˝ 1½˝ 56˝ 69 lbs. $355.75

3˝

BORE


Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-062-08 8˝ 1½˝ 16˝ 30 lbs. $242.35 9-062-12 12˝ 1½˝ 20˝ 34 lbs. $259.85 9-062-16 16˝ 1½˝ 24˝ 40 lbs. $277.30 9-062-20 20˝ 1½˝ 28˝ 43 lbs. $294.80 9-062-24 24˝ 1½˝ 32˝ 47 lbs. $302.00 9-062-30 30˝ 1½˝ 38˝ 51 lbs. $327.50 9-062-32 32˝ 1½˝ 40˝ 57 lbs. $335.85 9-062-36 36˝ 1½˝ 44˝ 62 lbs. $352.75 9-062-40 40˝ 1½˝ 48˝ 66 lbs. $369.65 9-062-42 42˝ 1½˝ 50˝ 69 lbs. $378.15 9-062-48 48˝ 1½˝ 56˝ 75 lbs. $457.15

3½˝

BORE

SPECIFICATIONS: Ports ½˝ NPT, 1¼˝ dia. pins.

Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-030-08 8˝ 2˝ 17˝ 43 lbs. $305.20 9-030-12 12˝ 2˝ 21˝ 49 lbs. $312.35 9-030-16 16˝ 2˝ 25˝ 56 lbs. $329.75 9-030-20 20˝ 2˝ 29˝ 62 lbs. $346.85 9-030-24 24˝ 2˝ 33˝ 69 lbs. $361.20 9-030-30 30˝ 2˝ 39˝ 81 lbs. $388.30 9-030-32 32˝ 2˝ 41˝ 82 lbs. $421.25 9-030-36 36˝ 2˝ 45˝ 91 lbs. $434.45 9-030-40 40˝ 2˝ 49˝ 95 lbs. $465.10 9-030-42 42˝ 2˝ 51˝ 99 lbs. $473.25 9-030-48 48˝ 2˝ 57˝ 106 lbs. $496.10 9-030-60 60˝ 2˝ 69˝ 127 lbs. $579.25

4˝

BORE

800-488-3407 Prince Heavy Duty Hydraulic Cylinders 53&

Dimensional Data for Prince Cylinders on this page

Crosstube Width Bore A L1 L2 4˝ 2¼˝ 4¾˝ 3¼˝ 4½˝ 2¼˝ 5¼˝ 3¼˝ 5˝ 21/16˝ 5¾˝ 4˝ 6˝ 21/16˝ 6¾˝ 4˝ 8˝ 3˝ 9˝ 5˝ Prince Fortress

Heavy Duty Welded Cylinders• Brand new PRINCE “Fortress” double acting cylinders use in-ternal threaded gland, U-cup seals for heavy duty applications.Max. 3000 PSI. Ports SAE 10. Crosstube ends for 1¼˝ pins.

Prince GladiatorHeavy Duty Cylinders

• Brand new PRINCE “Gladiator” line. Welded, double acting cylin-ders with fully chromed piston rod. 3000 PSI working pressure.

SPECIFICATIONS: Ports SAE 10, 1¼˝ dia. pins.


9-5113-08 8˝ 2¼˝ 17˝ 55 lbs. $448.259-5113-12 12˝ 2¼˝ 21˝ 64 lbs. $468.109-5113-16 16˝ 2¼˝ 25˝ 74 lbs. $492.709-5113-20 20˝ 2¼˝ 29˝ 83 lbs. $515.709-5113-24 24˝ 2¼˝ 33˝ 93 lbs. $541.509-5113-30 30˝ 2¼˝ 39˝ 106 lbs. $575.109-5113-32 32˝ 2¼˝ 41˝ 110 lbs. $585.909-5113-36 36˝ 2¼˝ 45˝ 121 lbs. $607.059-5113-40 40˝ 2¼˝ 49˝ 128 lbs. $641.409-5113-42 42˝ 2¼˝ 51˝ 136 lbs. $692.809-5113-48 48˝ 2¼˝ 59˝ 197 lbs. $721.509-5113-60 60˝ 2¼˝ 73˝ 228 lbs. $831.75

4½˝

BORE


Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-5115-08 8˝ 2˝ 17˝ 45 lbs. $399.15 9-5115-12 12˝ 2˝ 21˝ 53 lbs. $413.55 9-5115-16 16˝ 2˝ 25˝ 60 lbs. $428.70 9-5115-20 20˝ 2˝ 29˝ 67 lbs. $444.85 9-5115-24 24˝ 2˝ 33˝ 75 lbs. $459.30 9-5115-30 30˝ 2˝ 39˝ 84 lbs. $482.60 9-5115-32 32˝ 2˝ 41˝ 89 lbs. $492.45 9-5115-36 36˝ 2˝ 45˝ 96 lbs. $512.20 9-5115-40 40˝ 2˝ 49˝ 105 lbs. $528.35 9-5115-42 42˝ 2˝ 51˝ 109 lbs. $543.10 9-5115-48 48˝ 2˝ 59˝ 122 lbs. $592.80 9-5115-60 60˝ 2˝ 73˝ 146 lbs. $705.05

4˝

BORE

SPECIFICATIONS: Ports ¾˝ NPT, 1½˝ dia. pins.

Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-1143-08 8˝ 2½˝ 19˝ 80 lbs. $ 508.70 9-1143-12 12˝ 2½˝ 23˝ 89 lbs. $ 550.70 9-1143-16 16˝ 2½˝ 27˝ 100 lbs. $ 576.25 9-1143-20 20˝ 2½˝ 31˝ 112 lbs. $ 615.30 9-1143-24 24˝ 2½˝ 35˝ 120 lbs. $ 660.70 9-1143-30 30˝ 2½˝ 41˝ 135 lbs. $ 722.85 9-1143-36 36˝ 2½˝ 47˝ 196 lbs. $ 772.95 9-1143-48 48˝ 2½˝ 61˝ 234 lbs. $ 957.80 9-1143-54 54˝ 2½˝ 68˝ 251 lbs. $1018.40 9-1143-60 60˝ 2½˝ 75˝ 270 lbs. $1088.25

5˝

BORE

SPECIFICATIONS: Ports ¾˝ NPT, 1½˝ dia. pins.

Rod Retracted ITEM Stroke Dia. Lgth. Shpg. Price 9-1144-08 8˝ 3˝ 19˝ 112 lbs. $ 633.85 9-1144-12 12˝ 3˝ 23˝ 121 lbs. $ 692.50 9-1144-16 16˝ 3˝ 27˝ 133 lbs. $ 716.65 9-1144-24 24˝ 3˝ 35˝ 205 lbs. $ 829.70 9-1144-30 30˝ 3˝ 41˝ 225 lbs. $ 918.55 9-1144-36 36˝ 3˝ 47˝ 245 lbs. $1007.40 9-1144-48 48˝ 3˝ 61˝ 292 lbs. $1292.20 9-1144-54 54˝ 3˝ 68˝ 319 lbs. $1402.30 9-1144-60 60˝ 3˝ 75˝ 346 lbs. $1448.10

6˝

BORE

8˝ Bore Prince Standard DutyWelded Cylinders

• Brand new PRINCE 3000 PSI standard duty double acting cylin-ders. Features include welded construction, fully chromed pistonrod, ductile iron piston and thread-in gland and crosstube ends onboth ends with grease zerks.

SPECIFICATIONS: Ports SAE 16, 2½˝ dia. pins.


9-8423-8 8˝ 4˝ 24˝ 250 lbs. $1660.059-8423-12 12˝ 4˝ 28˝ 275 lbs. $1713.509-8423-16 16˝ 4˝ 32˝ 300 lbs. $1820.259-8423-20 20˝ 4˝ 36˝ 325 lbs. $1955.759-8423-24 24˝ 4˝ 40˝ 350 lbs. $2011.209-8423-30 30˝ 4˝ 46˝ 385 lbs. $2095.909-8423-36 36˝ 4˝ 52˝ 425 lbs. $2211.509-8423-48 48˝ 4˝ 66˝ 500 lbs. $2678.109-8423-54 54˝ 4˝ 73˝ 540 lbs. $2693.059-8423-60 60˝ 4˝ 80˝ 580 lbs. $2808.05

8˝

BORE

54 Wolverine Welded Crosstube Cylinders www.surpluscenter.com8• Brand new, WOLVERINE by PRINCE double acting 3000 PSI ratedcylinders. Features include 100% tested for quality assurance, NorthAmerican sourced seals, hard chromed rod, cast steel ends withgrease zerks, o-ring ports, thread-in gland and black paint.



9-8771-4 4˝ 1¼˝ 12˝ 12 lbs. $ 88.959-8771-6 6˝ 1¼˝ 14˝ 13 lbs. $ 93.009-8771-8 8˝ 1¼˝ 16˝ 15 lbs. $ 97.959-8771-10 10˝ 1¼˝ 18˝ 17 lbs. $101.959-8771-12 12˝ 1¼˝ 20˝ 19 lbs. $105.959-8771-14 14˝ 1¼˝ 22˝ 20 lbs. $110.959-8771-16 16˝ 1¼˝ 24˝ 22 lbs. $114.959-8771-18 18˝ 1¼˝ 26˝ 24 lbs. $118.959-8771-20 20˝ 1¼˝ 28˝ 25 lbs. $123.959-8771-24 24˝ 1¼˝ 32˝ 29 lbs. $131.959-8771-30 30˝ 1¼˝ 38˝ 34 lbs. $144.959-8771-32 32˝ 1¼˝ 40˝ 36 lbs. $149.959-8771-36 36˝ 1¼˝ 44˝ 39 lbs. $158.95

2˝

BORE



9-8772-4 4˝ 1½˝ 12˝ 16 lbs. $106.959-8772-6 6˝ 1½˝ 14˝ 18 lbs. $112.959-8772-8 8˝ 1½˝ 16˝ 20 lbs. $117.959-8772-10 10˝ 1½˝ 18˝ 22 lbs. $123.009-8772-12 12˝ 1½˝ 20˝ 25 lbs. $128.959-8772-14 14˝ 1½˝ 22˝ 27 lbs. $133.959-8772-16 16˝ 1½˝ 24˝ 29 lbs. $139.959-8772-18 18˝ 1½˝ 26˝ 31 lbs. $144.959-8772-20 20˝ 1½˝ 28˝ 34 lbs. $150.959-8772-24 24˝ 1½˝ 32˝ 38 lbs. $160.959-8772-30 30˝ 1½˝ 38˝ 45 lbs. $176.959-8772-32 32˝ 1½˝ 40˝ 47 lbs. $182.959-8772-36 36˝ 1½˝ 44˝ 51 lbs. $194.95

2½˝

BORE



9-8773-4 4˝ 1½˝ 12˝ 19 lbs. $125.009-8773-6 6˝ 1½˝ 14˝ 22 lbs. $131.959-8773-8 8˝ 1½˝ 16˝ 24 lbs. $136.959-8773-10 10˝ 1½˝ 18˝ 27 lbs. $142.959-8773-12 12˝ 1½˝ 20˝ 29 lbs. $148.959-8773-14 14˝ 1½˝ 22˝ 32 lbs. $154.959-8773-16 16˝ 1½˝ 24˝ 34 lbs. $160.959-8773-18 18˝ 1½˝ 26˝ 36 lbs. $166.959-8773-20 20˝ 1½˝ 28˝ 39 lbs. $172.959-8773-24 24˝ 1½˝ 32˝ 44 lbs. $184.959-8773-30 30˝ 1½˝ 38˝ 51 lbs. $201.959-8773-32 32˝ 1½˝ 40˝ 54 lbs. $208.959-8773-36 36˝ 1½˝ 44˝ 59 lbs. $220.959-8773-40 40˝ 1½˝ 48˝ 63 lbs. $232.959-8773-42 42˝ 1½˝ 50˝ 65 lbs. $244.009-8773-48 48˝ 1½˝ 56˝ 73 lbs. $257.95

3˝

BORE



9-8774-8 8˝ 1¾˝ 18˝ 33 lbs. $168.959-8774-10 10˝ 1¾˝ 20˝ 36 lbs. $175.959-8774-12 12˝ 1¾˝ 22˝ 39 lbs. $182.959-8774-14 14˝ 1¾˝ 24˝ 42 lbs. $189.959-8774-16 16˝ 1¾˝ 26˝ 45 lbs. $197.959-8774-18 18˝ 1¾˝ 28˝ 48 lbs. $204.959-8774-20 20˝ 1¾˝ 30˝ 51 lbs. $211.959-8774-24 24˝ 1¾˝ 34˝ 57 lbs. $226.959-8774-30 30˝ 1¾˝ 40˝ 67 lbs. $247.959-8774-32 32˝ 1¾˝ 42˝ 70 lbs. $254.959-8774-36 36˝ 1¾˝ 46˝ 76 lbs. $269.959-8774-40 40˝ 1¾˝ 50˝ 82 lbs. $283.959-8774-42 42˝ 1¾˝ 52˝ 85 lbs. $298.209-8774-48 48˝ 1¾˝ 58˝ 94 lbs. $312.95

3½˝

BORE

SPECIFICATIONS: Ports SAE 4, ¾˝ dia. pins.


9-8770-4 4˝ 1˝ 12˝ 8 lbs. $ 71.959-8770-6 6˝ 1˝ 14˝ 9 lbs. $ 74.959-8770-8 8˝ 1˝ 16˝ 10 lbs. $ 78.959-8770-10 10˝ 1˝ 18˝ 11 lbs. $ 81.959-8770-12 12˝ 1˝ 20˝ 13 lbs. $ 84.959-8770-14 14˝ 1˝ 22˝ 14 lbs. $ 88.959-8770-16 16˝ 1˝ 24˝ 15 lbs. $ 91.959-8770-18 18˝ 1˝ 26˝ 16 lbs. $ 95.95

1½˝

BORE

SPECIFICATIONS: Ports SAE 8, 1½˝ dia. pins.


9-8775-8 8˝ 2˝ 18˝ 41 lbs. $203.959-8775-10 10˝ 2˝ 20˝ 45 lbs. $212.959-8775-12 12˝ 2˝ 22˝ 49 lbs. $221.959-8775-14 14˝ 2˝ 24˝ 52 lbs. $229.959-8775-16 16˝ 2˝ 26˝ 56 lbs. $237.959-8775-18 18˝ 2˝ 28˝ 60 lbs. $246.959-8775-20 20˝ 2˝ 30˝ 63 lbs. $254.959-8775-24 24˝ 2˝ 34˝ 71 lbs. $271.959-8775-30 30˝ 2˝ 40˝ 82 lbs. $296.959-8775-32 32˝ 2˝ 42˝ 85 lbs. $305.959-8775-36 36˝ 2˝ 46˝ 93 lbs. $322.959-8775-40 40˝ 2˝ 50˝ 100 lbs. $339.959-8775-42 42˝ 2˝ 52˝ 104 lbs. $356.359-8775-48 48˝ 2˝ 58˝ 115 lbs. $373.959-8775-54 54˝ 2˝ 64˝ 126 lbs. $418.909-8775-60 60˝ 2˝ 70˝ 137 lbs. $464.359-8775-72 72˝ 2˝ 82˝ 159 lbs. $541.559-8775-84 84˝ 2˝ 94˝ 181 lbs. $613.709-8775-96 96˝ 2˝ 106˝ 203 lbs. $684.25

4˝

BORE

Dimensional Data Base Gland Crosstube Barrel to to Width Bore OD Pin Ctr Pin Ctr Base Rod 1½˝ 2˝ 1¼˝ 2⅝˝ 2¼˝ 2˝ 2˝ 2½˝ 1½˝ 2¼˝ 2¾˝ 2¼˝ 2½˝ 3˝ 1½˝ 2¼˝ 3¼˝ 2¼˝ 3˝ 3½˝ 1½˝ 2¼˝ 3¾˝ 2¼˝ 3½˝ 4˝ 2˝ 4˝ 4¼˝ 2¼˝ 4˝ 4½˝ 2¼˝ 3¾˝ 4¾˝ 2½˝

Dimensional DataClevis Width Inside Width Throat Depth Barrel O.D. Thread

Bore A B C D E F G H1½˝ 1.75˝ 2.00˝ 0.88˝ 0.88˝ 1.63˝ 1.62˝ 2.00˝ ⅞˝-14 UNF2˝ 2.13˝ 2.63˝ 1.13˝ 1.13˝ 2.13˝ 2.12˝ 2.50˝ 1⅛˝-12 UNF2½˝ 2.13˝ 2.63˝ 1.13˝ 1.13˝ 2.13˝ 2.13˝ 3.00˝ 1⅛˝-12 UNF3˝ 2.63˝ 2.63˝ 1.13˝ 1.13˝ 1.88˝ 2.13˝ 3.50˝ 1¼˝-12 UNF3½˝ 2.63˝ 2.75˝ 1.13˝ 1.13˝ 1.88˝ 2.13˝ 4.00˝ 1½˝-12 UNF4˝ 2.63˝ 2.75˝ 1.13˝ 1.13˝ 1.75˝ 2.13˝ 4.50˝ 1½˝-12 UNF

800-488-3407 Wolverine Welded Clevis Cylinders 55&

• Brand new, WOLVERINE by PRINCE double acting 3000 PSIrated welded clevis cylinders. High quality cylinders that are 100percent tested for quality assurance. Features include North Amer-ican sourced seals, hard chromed rod, cast steel clevis ends withthreaded on rod clevis, o-ring top ports, thread-in gland and highluster black paint.



9-8777-4 4˝ 1¼˝ 14¼˝ 16 lbs. $ 94.959-8777-6 6˝ 1¼˝ 16¼˝ 17 lbs. $ 98.959-8777-8-S 8˝ 1¼˝ 18¼˝ 19 lbs. $102.959-8777-8 8˝ 1¼˝ 20¼˝ 19 lbs. $104.959-8777-10 10˝ 1¼˝ 20¼˝ 20 lbs. $107.009-8777-12 12˝ 1¼˝ 22¼˝ 22 lbs. $110.959-8777-14 14˝ 1¼˝ 24¼˝ 24 lbs. $115.959-8777-16 16˝ 1¼˝ 26¼˝ 25 lbs. $119.959-8777-18 18˝ 1¼˝ 28¼˝ 27 lbs. $123.959-8777-20 20˝ 1¼˝ 30¼˝ 28 lbs. $127.959-8777-24 24˝ 1¼˝ 34¼˝ 31 lbs. $135.959-8777-30 30˝ 1¼˝ 40¼˝ 36 lbs. $147.959-8777-36 36˝ 1¼˝ 46¼˝ 41 lbs. $159.95

2˝

BORE



9-8778-4 4˝ 1½˝ 14¼˝ 19 lbs. $108.959-8778-6 6˝ 1½˝ 16¼˝ 21 lbs. $113.959-8778-8-S 8˝ 1½˝ 18¼˝ 23 lbs. $118.959-8778-8 8˝ 1½˝ 20¼˝ 23 lbs. $120.959-8778-10 10˝ 1½˝ 20¼˝ 24 lbs. $123.959-8778-12 12˝ 1½˝ 22¼˝ 26 lbs. $128.009-8778-14 14˝ 1½˝ 24¼˝ 28 lbs. $132.959-8778-16 16˝ 1½˝ 26¼˝ 30 lbs. $137.959-8778-18 18˝ 1½˝ 28¼˝ 32 lbs. $142.959-8778-20 20˝ 1½˝ 30¼˝ 34 lbs. $147.959-8778-24 24˝ 1½˝ 34¼˝ 38 lbs. $156.959-8778-30 30˝ 1½˝ 40¼˝ 44 lbs. $171.959-8778-36 36˝ 1½˝ 46¼˝ 49 lbs. $186.959-8778-48 48˝ 1½˝ 58¼˝ 60 lbs. $216.95

2½˝

BORE



9-8780-4 4˝ 1¾˝ 14¼˝ 29 lbs. $153.959-8780-6 6˝ 1¾˝ 16¼˝ 32 lbs. $160.959-8780-8-S 8˝ 1¾˝ 18¼˝ 35 lbs. $167.959-8780-8 8˝ 1¾˝ 20¼˝ 36 lbs. $171.959-8780-10 10˝ 1¾˝ 20¼˝ 38 lbs. $175.959-8780-12 12˝ 1¾˝ 22¼˝ 41 lbs. $182.959-8780-14 14˝ 1¾˝ 24¼˝ 44 lbs. $189.959-8780-16 16˝ 1¾˝ 26¼˝ 47 lbs. $196.959-8780-18 18˝ 1¾˝ 28¼˝ 50 lbs. $203.959-8780-20 20˝ 1¾˝ 30¼˝ 53 lbs. $211.959-8780-24 24˝ 1¾˝ 34¼˝ 59 lbs. $225.959-8780-30 30˝ 1¾˝ 40¼˝ 68 lbs. $246.959-8780-36 36˝ 1¾˝ 46¼˝ 78 lbs. $268.95

3½˝

BORE



9-8776-4 4˝ 1˝ 14¼˝ 10 lbs. $ 73.959-8776-6 6˝ 1˝ 16¼˝ 11 lbs. $ 77.959-8776-8-S 8˝ 1˝ 18¼˝ 12 lbs. $ 80.959-8776-8 8˝ 1˝ 20¼˝ 12 lbs. $ 82.959-8776-10 10˝ 1˝ 20¼˝ 13 lbs. $ 84.959-8776-12 12˝ 1˝ 22¼˝ 15 lbs. $ 87.959-8776-14 14˝ 1˝ 24¼˝ 16 lbs. $ 90.959-8776-16 16˝ 1˝ 26¼˝ 17 lbs. $ 94.959-8776-18 18˝ 1˝ 28¼˝ 18 lbs. $ 98.95

1½˝

BORE



9-8781-4 4˝ 2˝ 14¼˝ 35 lbs. $182.959-8781-6 6˝ 2˝ 16¼˝ 38 lbs. $190.959-8781-8-S 8˝ 2˝ 18¼˝ 42 lbs. $198.959-8781-8 8˝ 2˝ 20¼˝ 43 lbs. $203.959-8781-10 10˝ 2˝ 20¼˝ 46 lbs. $207.959-8781-12 12˝ 2˝ 22¼˝ 49 lbs. $215.959-8781-14 14˝ 2˝ 24¼˝ 53 lbs. $224.959-8781-16 16˝ 2˝ 26¼˝ 57 lbs. $232.959-8781-18 18˝ 2˝ 28¼˝ 60 lbs. $241.959-8781-20 20˝ 2˝ 30¼˝ 64 lbs. $249.959-8781-24 24˝ 2˝ 34¼˝ 71 lbs. $266.959-8781-30 30˝ 2˝ 40¼˝ 83 lbs. $291.959-8781-36 36˝ 2˝ 46¼˝ 94 lbs. $316.95

4˝

BORE



9-8779-4 4˝ 1½˝ 14¼˝ 24 lbs. $131.959-8779-6 6˝ 1½˝ 16¼˝ 26 lbs. $137.959-8779-8-S 8˝ 1½˝ 18¼˝ 29 lbs. $143.959-8779-8 8˝ 1½˝ 20¼˝ 29 lbs. $145.959-8779-10 10˝ 1½˝ 20¼˝ 31 lbs. $148.959-8779-12 12˝ 1½˝ 22¼˝ 34 lbs. $155.959-8779-14 14˝ 1½˝ 24¼˝ 36 lbs. $161.959-8779-16 16˝ 1½˝ 26¼˝ 39 lbs. $167.959-8779-18 18˝ 1½˝ 28¼˝ 41 lbs. $173.959-8779-20 20˝ 1½˝ 30¼˝ 43 lbs. $179.959-8779-24 24˝ 1½˝ 34¼˝ 48 lbs. $190.959-8779-30 30˝ 1½˝ 40¼˝ 56 lbs. $208.959-8779-36 36˝ 1½˝ 46¼˝ 63 lbs. $227.95

3˝

BORE

56 Double Rod & Small Bore Hydraulic Cylinders www.surpluscenter.com8

SPECIFICATIONS: Rod dia. 1˝, ports SAE 6, pin holes ⅝˝. Retracted ITEM Stroke Lgth. Shpg. Price 9-7706-4 4˝ 11˝ 9 lbs. $87.45 9-7706-6 6˝ 13˝ 10 lbs. $91.95 9-7706-8 8˝ 15˝ 11 lbs. $98.30 9-7706-10 10˝ 17˝ 12 lbs. $102.80 9-7706-12 12˝ 19˝ 13 lbs. $108.45

SPECIFICATIONS: Rod dia. 1¼˝, ports SAE 8, pin holes ¾˝. Retracted ITEM Stroke Lgth. Shpg. Price 9-7707-8 8˝ 16˝ 15 lbs. $111.20 9-7707-10 10˝ 18˝ 17 lbs. $117.15 9-7707-16 16˝ 24˝ 21 lbs. $134.40 9-7707-20 20˝ 28˝ 24 lbs. $141.65 9-7707-24 24˝ 32˝ 27 lbs. $158.65 9-7707-30 30˝ 38˝ 31 lbs. $180.65 9-7707-32 32˝ 40˝ 33 lbs. $188.20 9-7707-36 36˝ 44˝ 36 lbs. $200.10 9-7707-42 42˝ 50˝ 40 lbs. $228.80 9-7707-48 48˝ 56˝ 44 lbs. $246.50 9-7707-60 60˝ 68˝ 53 lbs. $276.65 9-7707-72 72˝ 80˝ 62 lbs. $359.45

2˝

BORE

1½˝

BORE

• Brand new, manufactured exclusively for Surplus Center. In-ternal gland with wire-lock retaining ring. Pin-hole thru rod andcross-tube at base end. Made in USA. Rated 3000 PSI.

Dimensional Data for Surplus Center Welded Cylinders

Crosstube Width Bore A B C D L1

1½˝ 1⅞˝ ⅝˝ 1¼˝ 3⅛˝ 2˝

2˝ 2⅜˝ ¾˝ 1¼˝ 4˝ 2½˝

Bore - Inside diameter of cylinderStroke - How far a cylinder extends outR-length - Distance in inches between pin

centers when cylinder is retractedRod Diameter - Diameter of cylinder rod






Cylinders Definitions Rod Port Base PortRod Diam.


Bore

Double RodSteering Cylinders

• Brand new double rod, steering type hydraulic cylinder. Both rodends are drilled and tapped to accept a standard ¾˝-16 tie rod end.A pair of 1˝ thick steel mounting blocks are welded to cylinderbody. Retracted length is measured end of rod to end of rod.SPECIFICATIONS• PSI 3000 max. • Both ends tapped ¾˝-16 x 1⅝˝ RH• Ports SAE 6 • Wrench flats at rod ends• ⅜˝ mounting holes • Square ring gland retainer

ITEM Bore Stroke R. Diam. R. Lgth Mnt. Ctrs. Shpg. Price 9-6845 2˝ 8˝ 1¼˝ 23˝ 11½˝ x 3⅛˝ 22 lbs. $195.30 9-6846 2˝ 10˝ 1¼˝ 27˝ 13½˝ x 3⅛˝ 24 lbs. $202.70 9-6688 2½˝ 8˝ 1½˝ 22½˝ 11½˝ x 3⅝˝ 24 lbs. $212.70 9-6847 2½˝ 10˝ 1½˝ 26½˝ 13½˝ x 3⅝˝ 26 lbs. $225.50

2½˝ DA Loader Cylinders

• Brand new MONARCH INDUSTRIES. Double acting cylinder.Welded construction. Ideal size for many loader applications.SPECIFICATIONS• Double acting • 2500 PSI max. • Ports ⅜˝ NPT • Crosstube base 2⅞˝ wide• Bore 2½˝ • Rod diam. 1½˝ • Clevis rod • Pin holes 1˝

1½˝ Bore Cylinders

• Brand new, LION Hydraulics WX welded cylinder. Internalthreaded gland with wrench flats for easy service. Cast steel crosstubes at each end.SPECIFICATIONS• Double acting • Ports SAE 6 • Rod diam. 1˝ • Pin holes ¾˝• PSI 3000 max. • Crosstube ends: rod 1½˝ w., base 1⅞˝ w.

ITEM Stroke R. Lgth Shpg. Price 9-7270-08 8˝ 16˝ 12 lbs. $122.25 9-7270-10 10˝ 18˝ 13 lbs. $125.85 9-7270-12 12˝ 20˝ 14 lbs. $129.90 9-7270-14 14˝ 22˝ 15 lbs. $133.85 9-7270-16 16˝ 24˝ 16 lbs. $137.75 9-7270-18 18˝ 26˝ 17 lbs. $141.65 9-7270-20 20˝ 28˝ 18 lbs. $145.45 9-7270-24 24˝ 32˝ 20 lbs. $153.25

ITEM Stroke R. Lgth Shpg. Price 9-6772 14˝ 24¼˝ 28 lbs. $138.95 9-6773 22˝ 32¼˝ 38 lbs. $160.50 9-6774 30˝ 38⅝˝ 45 lbs. $180.95 9-6775 36˝ 48⅝˝ 52 lbs. $190.80

2½˝

BORE

1½˝

BORE

URPLUS CENTE

Made in the USA

800-488-3407www.surpluscenter.com1015 West “O” St.Lincoln, NE 68528

S R

URPLUS CENTE

Made in the USA


S R

800-488-3407 Surplus Center Welded Hydraulic Cylinders 57&

1½˝ Bore Cylinders• Brand new, manufactured exclusivelyfor Surplus Center. Welded double act-ing cylinders with crosstube ends. Inter-nal gland with snap ring. Made in USA.



9-7260-6 6˝ 1½˝ 13½˝ 17 lbs. $151.959-7260-8 8˝ 1½˝ 15½˝ 19 lbs. $161.259-7260-10 10˝ 1½˝ 17½˝ 21 lbs. $168.809-7260-12 12˝ 1½˝ 19½˝ 23 lbs. $178.359-7260-16 16˝ 1½˝ 23½˝ 27 lbs. $198.359-7260-20 20˝ 1½˝ 27½˝ 30 lbs. $217.059-7260-24 24˝ 1½˝ 31½˝ 34 lbs. $231.00

2½˝

BORE



9-7261-6 6˝ 1½˝ 14¼˝ 20 lbs. $182.709-7261-8 8˝ 1½˝ 16¼˝ 22 lbs. $192.159-7261-10 10˝ 1½˝ 18¼˝ 24 lbs. $200.409-7261-12 12˝ 1½˝ 20¼˝ 26 lbs. $211.709-7261-16 16˝ 1½˝ 24¼˝ 31 lbs. $232.309-7261-20 20˝ 1½˝ 28¼˝ 36 lbs. $251.459-7261-24 24˝ 1½˝ 32¼˝ 41 lbs. $270.00

3˝

BORE

SPECIFICATIONS: Ports SAE 6, ½˝ dia. pins.


9-7257-4 4˝ ⅝˝ 10˝ 5 lbs. $ 95.409-7257-6 6˝ ⅝˝ 12˝ 5 lbs. $101.059-7257-8 8˝ ⅝˝ 14˝ 6 lbs. $107.159-7257-10 10˝ ⅝˝ 16˝ 7 lbs. $113.409-7257-12 12˝ ⅝˝ 18˝ 7 lbs. $118.20

1˝

BORE



9-7258-4 4˝ 1˝ 11¼˝ 6 lbs. $ 92.109-7258-6 6˝ 1˝ 13¼˝ 7 lbs. $ 97.159-7258-8 8˝ 1˝ 15¼˝ 9 lbs. $102.959-7258-10 10˝ 1˝ 17¼˝ 10 lbs. $108.059-7258-12 12˝ 1˝ 19¼˝ 11 lbs. $113.959-7258-14 14˝ 1˝ 21¼˝ 12 lbs. $118.759-7258-16 16˝ 1˝ 23¼˝ 13 lbs. $125.85

1½˝

BORE



9-7259-6 6˝ 1¼˝ 13½˝ 15 lbs. $129.509-7259-8 8˝ 1¼˝ 15½˝ 16 lbs. $135.309-7259-10 10˝ 1¼˝ 17½˝ 17 lbs. $142.709-7259-12 12˝ 1¼˝ 19½˝ 19 lbs. $149.809-7259-16 16˝ 1¼˝ 23½˝ 22 lbs. $164.159-7259-20 20˝ 1¼˝ 27½˝ 24 lbs. $177.659-7259-24 24˝ 1¼˝ 31½˝ 27 lbs. $196.509-7259-30 30˝ 1¼˝ 37½˝ 32 lbs. $189.95

2˝

BORE

Swivel Ball End Cylinders• Brand new, manufactured exclusively for Surplus Center. Weldeddouble acting cylinders with wire-lock gland retainer. Swivel balljoints at both ends allow for angular motion.

URPLUS CENTE

Made in the USA


S R

Barrel O.D. Ball End Width Ball End O.D.Bore A B C D E1˝ 1⅜˝ 1˝ 0.38˝ 1.00˝ 2˝1½˝ 1⅞˝ 1˝ 0.38˝ 1.00˝ 2˝2˝ 2⅜˝ 1¾˝ 0.88˝ 1.38˝ 2¾˝2½˝ 2⅞˝ 1¾˝ 0.88˝ 1.38˝ 2¾˝3˝ 3⅜˝ 1¾˝ 0.56˝ 1.56˝ 3.13˝

Clevis End Cylinders

• Brand new, manufactured exclusively for Surplus Center. Doubleacting cylinders with formed clevis ends. Made in USA.

URPLUS CENTE

Made in the USA


S R

SPECIFICATIONS: Working pressure 1500 PSI, rod dia. ½˝,ports ¼˝ NPT, pin holes ½˝.

Retracted ITEM Stroke Lgth. Shpg. Price 9-1649-04 4˝ 10½˝ 6 lbs. $79.75 9-1649-06 6˝ 12½˝ 6 lbs. $85.40 9-1649-08 8˝ 14½˝ 7 lbs. $90.75 9-1649-10 10˝ 16½˝ 7 lbs. $96.00 9-1649-12 12˝ 18½˝ 8 lbs. $100.65

1˝

BORE

SPECIFICATIONS: Max. 2000 PSI, rod dia. ¾˝, ports ⅜˝ NPT,pin holes ¾˝.

Retracted ITEM Stroke Lgth. Shpg. Price

9-4410-04 4˝ 9½˝ 8 lbs. $ 89.60 9-4410-06 6˝ 11½˝ 9 lbs. $ 95.55 9-4410-08 8˝ 13½˝ 10 lbs. $101.20 9-4410-10 10˝ 15½˝ 11 lbs. $107.15 9-4410-12 12˝ 17½˝ 12 lbs. $113.10 9-4410-14 14˝ 19½˝ 12 lbs. $119.20 9-4410-16 16˝ 21½˝ 13 lbs. $124.70 9-4410-18 18˝ 23½˝ 14 lbs. $130.65

1½˝

BORE

58 Prince Rephasing Tie-Rod Cylinders www.surpluscenter.com8

3¾˝ and 4˝ Bore Cylinders

3˝ and 3¼˝ and 3½˝ Bore Cylinders

2½˝ and 2¾˝ Bore Cylinders

SPECIFICATIONS: Rod dia. 1⅜˝, ports SAE 8, 3000 PSI, clevis pin 1˝ dia.

Bore Size ITEM Stroke R. Lgth Shpg. Price9-7928-8 8˝ 20¼˝ 51 lbs. $278.459-7928-10 10˝ 22¼˝ 53 lbs. $294.109-7928-12 12˝ 24¼˝ 57 lbs. $309.809-7928-16 16˝ 28¼˝ 67 lbs. $328.959-7929-8 8˝ 20¼˝ 49 lbs. $281.259-7929-10 10˝ 22¼˝ 53 lbs. $286.259-7929-12 12˝ 24¼˝ 57 lbs. $291.209-7929-16 16˝ 28¼˝ 64 lbs. $332.45

SPECIFICATIONS: Rod dia. 1¼˝, ports SAE 8, 3000 PSI, clevis pin 1˝ dia.

Bore Size ITEM Stroke R. Lgth Shpg. Price9-7925-8 8˝ 20¼˝ 32 lbs. $231.009-7925-10 10˝ 22¼˝ 33 lbs. $236.559-7925-12 12˝ 24¼˝ 36 lbs. $242.759-7925-16 16˝ 28¼˝ 43 lbs. $267.609-7926-8 8˝ 20¼˝ 38 lbs. $236.459-7926-10 10˝ 22¼˝ 40 lbs. $248.459-7926-12 12˝ 24¼˝ 42 lbs. $265.059-7926-16 16˝ 28¼˝ 49 lbs. $280.659-7927-8 8˝ 20¼˝ 38 lbs. $238.059-7927-10 10˝ 22¼˝ 40 lbs. $256.159-7927-12 12˝ 24¼˝ 42 lbs. $274.309-7927-16 16˝ 28¼˝ 49 lbs. $289.40

SPECIFICATIONS: Rod dia. 1⅛˝, ports SAE 8, 3000 PSI, clevis pin 1˝ dia.

Bore Size ITEM Stroke R. Lgth Shpg. Price9-7923-8 8˝ 20¼˝ 28 lbs. $220.759-7923-10 10˝ 22¼˝ 29 lbs. $224.659-7923-12 12˝ 24¼˝ 31 lbs. $233.559-7924-8 8˝ 20¼˝ 32 lbs. $227.359-7924-10 10˝ 22¼˝ 33 lbs. $230.709-7924-12 12˝ 24¼˝ 35 lbs. $241.65

2¾˝ Bore

2½˝ Bore

3˝ Bore

3¼˝ Bore

3½˝ Bore

4˝ Bore

3¾˝ Bore

SPECIFICATIONS: Rod dia. 1½˝, ports SAE 8, 3000 PSI, clevis pin 1˝ dia.

Bore Size ITEM Stroke R. Lgth Shpg. Price9-7931-8 8˝ 20¼˝ 75 lbs. $358.209-7931-10 10˝ 22¼˝ 80 lbs. $370.909-7931-12 12˝ 24¼˝ 86 lbs. $383.509-7931-16 16˝ 28¼˝ 99 lbs. $415.059-7932-8 8˝ 20¼˝ 75 lbs. $361.459-7932-10 10˝ 22¼˝ 80 lbs. $378.059-7932-12 12˝ 24¼˝ 86 lbs. $394.659-7932-16 16˝ 28¼˝ 99 lbs. $426.00

SPECIFICATIONS: Rod dia. 2˝, ports SAE 8, 3000 PSI, clevis pin 1˝ dia. Bore Size ITEM Stroke R. Lgth Shpg. Price

9-7930-8 8˝ 20¼˝ 63 lbs. $351.109-7930-10 10˝ 22¼˝ 67 lbs. $363.659-7930-12 12˝ 24¼˝ 72 lbs. $375.959-7930-16 16˝ 28¼˝ 84 lbs. $406.90

Prince Rephasing Tie-Rod Cylinders• Brand New PRINCE rephasing double acting cylinders for series applications where multiple cylindersextend and retract equally. Two or more cylinders are plumbed in series, with bore and rod diameterssized so all rods extend or retract in unison. The rephase bypass allows oil to bypass piston on fullcylinder extension to fill the next cylinder during initial synchronization or to compensate for internalleakage.• The Royal Plate cylinder combines two rod coatings to provide excellent wear, hardness and corro-sion protection.

Not to be used as single cylinder at full pressure due to column buckling!

4½˝ Bore

5˝ Bore

4¾˝ Bore

Dimensional Data for Prince Rephasing CylindersThroat Depth Throat Depth

Bore A B C D E F2½˝ 11/16˝ 113/16˝ 59/32˝ 1⅞˝ 15/16˝ 11/16˝2¾˝ 11/16˝ 113/16˝ 523/32˝ 1⅞˝ 15/16˝ 11/16˝3˝ 11/16˝ 113/16˝ 527/32˝ 1⅞˝ 15/16˝ 11/16˝3¼˝ 11/16˝ 113/16˝ 527/32˝ 1⅞˝ 1¼˝ 11/16˝3½˝ 11/16˝ 113/16˝ 527/32˝ 1⅞˝ 1¼˝ 11/16˝3¾˝ 1⅛˝ 1⅞˝ 511/32˝ 1¾˝ 1¼˝ 11/16˝4˝ 1⅛˝ 1⅞˝ 511/32˝ 1¾˝ 1¼˝ 11/16˝4½˝ 1⅛˝ 1⅞˝ 41/32˝ 1¾˝ 1¼˝ 1⅛˝4¾˝ 1⅛˝ 113/16˝ 41/32˝ 1¾˝ 1¼˝ 1⅛˝5˝ 1⅛˝ 113/16˝ 41/32˝ 1¾˝ 1¼˝ 1⅛˝

4½˝ Bore Cylinders

4¾˝ and 5˝ Bore Cylinders

Clevis Pin

ITEM 9-6746$1.89• New steel clevis pin for hydraulic cylin-der. (Does not include retaining clips).SPECIFICATIONS• 1¼˝ dia • Overall length 3⅝˝• 2⅞˝ between pin holes • Shpg 1½ lbs.

1½˝ x 67˝ x 1½˝Displacement Cylinder

ITEM 9-7423 $99.95• New, PRINCE MFG. displacement cylin-der with wire-lock gland retainer. Designedto mount vertically with the rod down. Orig-inally built for use in car hoists. The steelcollar welded to the outside of the cylinderbody was designed to support the lift-armsof the car hoist.• The rod in this cylinder is hollow and con-nects the base port to the port in the sideof the rod.SPECIFICATIONS• Single acting • Port SAE 6• Bore x stroke 1½˝ x 67˝ • Rod end thru-hole• PSI 3000 max. • Pin hole ¼˝• Rod dia. 1½˝ • Hole centered ¼˝• Max load at full from rod endextension 5300 lbs. • Steel body collar

• Retracted lgth. 74⅛˝ • 3˝ O.D.end-to-end • Shpg. 70 lbs.

800-488-3407 Single Acting Cylinders & Clevis Pins 59&

1¼˝ to 1˝ CylinderPin HoleBushings

• Brand new PRINCE. Use to reduce cylin-der pin holes from 1¼˝ to 1˝. Made of hard-ened, high carbon, spring steel. Shpg. 1/10 lb.

ITEM 9-6542 ⅞˝ wide $4.20ITEM 9-6543 1˝ wide $5.10

1⅝˝ x 9˝ x 1⅜˝

ITEM 9-4495 $49.95• New, DUFF NORTON. Cross pin for lock-ing cylinder on full extension.SPECIFICATIONS• Single acting • Retracted lgth. 17˝• Bore x stroke 1⅝˝ x 9˝ • Crosstube ends• Pressure 5800 PSI max. rod 4¾˝ w., base 4˝ w.• Rod dia. 1⅜˝ • Pin holes 1˝• Ports ⅜˝ NPT • Shpg. 22 lbs.

1½˝ x 71˝ x 1½˝

ITEM 9-6107 $119.99• Displacement style cylinder with ports incenter of base end and in rod end. Bothports are for extension.SPECIFICATIONS • Retracted lgth. 73½˝• Single acting • Rod round• Bore/stroke 1½˝ x 71˝ 1½˝ diam. x 1½˝ long• PSI 2500 max. • Port in side of rod• Rod diam. 1½˝ • Base flat, port in end• Ports ¼˝ NPT • Shpg. 40 lbs.

Clevis PinsWith Clips

• New, steel clevis pins for hydraulic cylin-ders. Includes hair pins. Length isbetween hair pin holes. Shpg. 2 lbs.

ITEM Dia. Lgth. Price9-7889 1˝ 25/16˝ $1.499-7440 1˝ 27/16˝ $1.999-1960 1˝ 2¾˝ $7.309-1961 1˝ 3¼˝ $8.459-1962 1¼˝ 33/16˝ $10.95

Cylinder Clevis

• Brand new. Use asdirect replacementon many brands ofcylinders. 1˝ clearancebetween ears exceptITEM 9-7616 which has 11/16˝clearance. Cast iron.

ITEM Pin Thread Shpg. Price9-1902 1˝ 1⅛˝-12 4 lbs. $19.309-1902-A 1˝ 1¼˝-12 4 lbs. $11.959-1903 1˝ 1½˝-12 4 lbs. $43.359-7616 1¼˝ 1½˝-12 4 lbs. $42.25

2¾˝ x 4.0625˝ x 1˝

ITEM 9-8573 $59.95SPECIFICATIONS• New, single acting pull only• Retracted lgth. 911/16˝• Bore x stroke 2¾˝ x 4.0625˝ • Rod end tang 1¼˝ wide• Pressure 3250 PSI max. • Base end thru-hole• Rod dia. 1˝ outside width 2⅞˝• Wall thickness 3/16˝ • Pin holes ¾˝• Port SAE 4 • Shpg. 13 lbs.

Single Acting Snow Plow Cylinders• New, single acting displacementcylinder. Ideal for replacement onsnow plows and other applications.SPECIFICATIONS FOR ALL• Single acting • 2500 PSI max. • Port ¼˝ NPT • Thru-hole ends

Outside WidthITEM Bore Stroke Rod Dia. R. Lgth. Rod Base Pin Holes Shpg. Price

9-8656 1½˝ 6˝ 1⅛˝ 12⅜˝ 1⅛˝ 1⅝˝ ⅝˝ 11 lbs. $49.959-8658 1½˝ 6˝ 1½˝ 13˝ 1½˝ 1¾˝ ¾˝ 11 lbs. $49.959-8654 1½˝ 10˝ 1½˝ 17¼˝ 1½˝ 1¾˝ 1˝ 15 lbs. $49.959-8526 1½˝ 12˝ 1½˝ 18˝ 1½˝ 1⅝˝ ⅝˝ 17 lbs. $64.959-7880 1¾˝ 77/16˝ 1¾˝ 13⅝˝ 1⅜˝ 2˝ 43/64˝ 15 lbs. $59.999-8657 2˝ 6˝ 1˝ 12¾˝ 1˝ 1½˝ ⅝˝ 15 lbs. $49.959-8655 2˝ 6˝ 17/16˝ 13¼˝ 17/16˝ 1½˝ ¾˝ 19 lbs. $49.959-8660 2˝ 10˝ 2˝ 17¼˝ 2˝ 2⅛˝ 1˝ 23 lbs. $59.959-8653 2˝ 16˝ 2˝ 23¼˝ 2˝ 2¼˝ 1˝ 30 lbs. $59.959-8659 2˝ 16˝ 2˝ 23¼˝ 2˝ 2¼˝ 1¼˝ 30 lbs. $59.95

2¾˝ x 37¾˝ x 2½˝

ITEM 9-9607 $187.95• Restrictor with 0.05˝ dia. orifice threadedinto port.SPECIFICATIONS • Port SAE 6 w/restrictor• Unused, old inventory • Retracted lgth. 47⅞˝• Single acting • Tang ends• Bore x Stroke 2¾˝ x 37¾˝ rod 1½˝ w., base 1¼˝ w.• Pressure 3000 PSI max. • Pin holes• Rod dia. 2½˝, hollow rod 1½˝, base 1¼˝• Wall thickness 3/16˝ • Shpg. 60 lbs.

1¾˝ x 13˝ x 1½˝

ITEM 9-9539 $94.95SPECIFICATIONS • Port SAE 6• Unused, old inventory • Retracted lgth. 19˝• Single acting • Thru-hole ends• Bore x Stroke 1¾˝ x 13˝ rod 1½˝ w., base 2¼˝ w.• Barrel thickness 3/16˝ • Pin holes• Pressure 1500 PSI max. rod ⅝˝, base ¾˝• Rod dia. 1½˝ • Shpg. 19 lbs.

3⅜˝ x 15½˝ x 3˝

ITEM 9-9471 $134.95• Unused, old inventory. Rod end featuresa stepped end with two thru-holes. Thru-hole on end of rod has 1¾˝ width and1.275˝ pin hole. Second thru-hole has 3˝width and 1.275˝ pin hole. Thru-hole cen-ters are 3˝ apart.SPECIFICATIONS• Single acting • Retracted lgth. 33˝• Bore x Stroke 3⅜˝ x 15½˝ • Rod two thru-holes• Barrel thickness ¼˝ 1¾˝ wide and 3˝ wide• Pressure 3000 PSI max. • Base thru-hole 1¾˝ wide• Rod dia. 3˝ • Pin holes 1.275˝• Port SAE 8 • Shpg. 80 lbs.



60 Surplus Center Welded Crosstube Cylinders www.surpluscenter.com8

Rod Retracted Rod Base Pin ITEM Stroke PSI Dia. Ports Lgth. Width Width Holes Shpg. Price 9-7710-4 4˝ 3500 1¼˝ SAE 8 11˝ 1¾˝ 2⅝˝ 1˝ 13 lbs. $116.95 9-7710-10 10˝ 3500 1¼˝ SAE 8 17˝ 1¾˝ 2⅝˝ 1˝ 18 lbs. $133.95 9-7710-12 12˝ 3500 1¼˝ SAE 8 19˝ 1¾˝ 2⅝˝ 1˝ 19 lbs. $139.95 9-7710-16 16˝ 3500 1¼˝ SAE 8 23˝ 1¾˝ 2⅝˝ 1˝ 22 lbs. $147.95 9-7710-20 20˝ 3500 1¼˝ SAE 8 27˝ 1¾˝ 2⅝˝ 1˝ 25 lbs. $160.95 9-7710-30 30˝ 3500 1¼˝ SAE 8 37˝ 1¾˝ 2⅝˝ 1˝ 32 lbs. $182.95 9-7710-32 32˝ 3500 1¼˝ SAE 8 39˝ 1¾˝ 2⅝˝ 1˝ 34 lbs. $195.95 9-7711-4 4˝ 3500 1½˝ SAE 8 12˝ 2˝ 3⅛˝ 1˝ 18 lbs. $136.95 9-7711-6 6˝ 3500 1½˝ SAE 8 14˝ 2˝ 3⅛˝ 1˝ 19 lbs. $144.95 9-7711-8 8˝ 3500 1½˝ SAE 8 16˝ 2˝ 3⅛˝ 1˝ 21 lbs. $149.95 9-7711-10 10˝ 3500 1½˝ SAE 8 18˝ 2˝ 3⅛˝ 1˝ 23 lbs. $157.95 9-7711-12 12˝ 3500 1½˝ SAE 8 20˝ 2˝ 3⅛˝ 1˝ 25 lbs. $164.95 9-7711-18 18˝ 3500 1½˝ SAE 8 26˝ 2˝ 3⅛˝ 1˝ 31 lbs. $185.95 9-7711-20 20˝ 3500 1½˝ SAE 8 28˝ 2˝ 3⅛˝ 1˝ 33 lbs. $194.95 9-7711-30 30˝ 3500 1½˝ SAE 8 38˝ 2˝ 3⅛˝ 1˝ 43 lbs. $229.95 9-7711-36 36˝ 3500 1½˝ SAE 8 44˝ 2˝ 3⅛˝ 1˝ 49 lbs. $252.95 9-7712-4 4˝ 3500 1¾˝ SAE 8 12˝ 2¼˝ 3⅝˝ 1˝ 23 lbs. $164.95 9-7712-6 6˝ 3500 1¾˝ SAE 8 14˝ 2¼˝ 3⅝˝ 1˝ 25 lbs. $174.95 9-7712-8 8˝ 3500 1¾˝ SAE 8 16˝ 2¼˝ 3⅝˝ 1˝ 27 lbs. $181.95 9-7712-10 10˝ 3500 1¾˝ SAE 8 18˝ 2¼˝ 3⅝˝ 1˝ 30 lbs. $190.95 9-7712-12 12˝ 3500 1¾˝ SAE 8 20˝ 2¼˝ 3⅝˝ 1˝ 33 lbs. $199.95 9-7712-14 14˝ 3500 1¾˝ SAE 8 22˝ 2¼˝ 3⅝˝ 1˝ 35 lbs. $208.95 9-7712-18 18˝ 3500 1¾˝ SAE 8 26˝ 2¼˝ 3⅝˝ 1˝ 40 lbs. $228.95 9-7712-24 24˝ 3500 1¾˝ SAE 8 32˝ 2¼˝ 3⅝˝ 1˝ 48 lbs. $253.95 9-7712-32 32˝ 3500 1¾˝ SAE 8 40˝ 2¼˝ 3⅝˝ 1˝ 58 lbs. $281.95 9-7712-36 36˝ 3500 1¾˝ SAE 8 44˝ 2¼˝ 3⅝˝ 1˝ 63 lbs. $304.95 9-7712-48 48˝ 3500 1¾˝ SAE 8 58˝ 2¼˝ 3⅝˝ 1˝ 81 lbs. $339.95 9-7713-14 14˝ 3500 2˝ SAE 8 22˝ 2½˝ 4⅛˝ 1˝ 44 lbs. $246.95 9-7713-20 20˝ 3500 2˝ SAE 8 28˝ 2½˝ 4⅛˝ 1˝ 54 lbs. $280.95 9-7713-30 30˝ 3500 2˝ SAE 8 38˝ 2½˝ 4⅛˝ 1˝ 69 lbs. $324.95 9-7713-32 32˝ 3500 2˝ SAE 8 40˝ 2½˝ 4⅛˝ 1˝ 73 lbs. $332.95 9-7713-40 40˝ 3500 2˝ SAE 8 48˝ 2½˝ 4⅛˝ 1˝ 84 lbs. $360.95 9-7713-42 42˝ 3500 2˝ SAE 8 50˝ 2½˝ 4⅛˝ 1˝ 87 lbs. $382.95 9-7713-48 48˝ 3500 2˝ SAE 8 58˝ 2½˝ 4⅛˝ 1˝ 102 lbs. $407.95 9-7714-8 8˝ 3500 2¼˝ SAE 8 19˝ 4˝ 4¾˝ 1¼˝ 52 lbs. $283.95 9-7714-10 10˝ 3500 2¼˝ SAE 8 21˝ 4˝ 4¾˝ 1¼˝ 56 lbs. $304.95 9-7714-12 12˝ 3500 2¼˝ SAE 8 23˝ 4˝ 4¾˝ 1¼˝ 60 lbs. $320.95 9-7714-14 14˝ 3500 2¼˝ SAE 8 25˝ 4˝ 4¾˝ 1¼˝ 66 lbs. $335.95 9-7714-16 16˝ 3500 2¼˝ SAE 8 27˝ 4˝ 4¾˝ 1¼˝ 69 lbs. $349.95 9-7714-20 20˝ 3500 2¼˝ SAE 8 31˝ 4˝ 4¾˝ 1¼˝ 77 lbs. $374.95 9-7714-24 24˝ 3500 2¼˝ SAE 8 35˝ 4˝ 4¾˝ 1¼˝ 86 lbs. $407.95 9-7714-30 30˝ 3500 2¼˝ SAE 8 41˝ 4˝ 4¾˝ 1¼˝ 97 lbs. $439.95 9-7714-32 32˝ 3500 2¼˝ SAE 8 43˝ 4˝ 4¾˝ 1¼˝ 106 lbs. $460.95 9-7714-36 36˝ 3500 2¼˝ SAE 8 47˝ 4˝ 4¾˝ 1¼˝ 115 lbs. $483.95 9-7714-42 42˝ 3500 2¼˝ SAE 8 53˝ 4˝ 4¾˝ 1¼˝ 126 lbs. $524.95 9-7714-48 48˝ 3500 2¼˝ SAE 8 61˝ 4˝ 4¾˝ 1¼˝ 142 lbs. $570.95 9-7714-54 54˝ 3500 2¼˝ SAE 8 68˝ 4˝ 4¾˝ 1¼˝ 204 lbs. $617.95 9-7714-60 60˝ 3500 2¼˝ SAE 8 75˝ 4˝ 4¾˝ 1¼˝ 220 lbs. $694.95 9-7714-72 72˝ 3500 2¼˝ SAE 8 89˝ 4˝ 4¾˝ 1¼˝ 250 lbs. $832.95 9-7714-84 84˝ 3500 2¼˝ SAE 8 101˝ 4˝ 4¾˝ 1¼˝ 273 lbs. $880.95 9-7714-96 96˝ 3500 2¼˝ SAE 8 113˝ 4˝ 4¾˝ 1¼˝ 300 lbs. $982.95

Bore

2˝

2½˝

3˝

3½˝

4˝

• New, manufactured exclusively for Surplus Center. Heavy duty dou-ble acting cylinders. External gland for superior performance at highpressure. Crosstubes at both ends. Excellent for many heavy duty mo-bile applications. Made in USA. 3500 PSI working pressure.

800-488-3407 Surplus Center Welded Clevis Cylinders 61&

Rod Retracted Rod Base Pin ITEM Stroke PSI Dia. Ports Lgth. Width Width Holes Shpg. Price

9-7715-6 6˝ 3500 1⅛˝ SAE 8 16¼˝ 1.88˝ 1.88˝ 1˝ 18 lbs. $110.959-7715-8-S 8˝ 3500 1⅛˝ SAE 8 18¼˝ 1.88˝ 1.88˝ 1˝ 19 lbs. $114.959-7715-8 8˝ 3500 1⅛˝ SAE 8 20¼˝ 1.88˝ 1.88˝ 1˝ 20 lbs. $116.959-7715-10 10˝ 3500 1⅛˝ SAE 8 20¼˝ 1.88˝ 1.88˝ 1˝ 21 lbs. $118.959-7715-30 30˝ 3500 1⅛˝ SAE 8 40¼˝ 1.88˝ 1.88˝ 1˝ 34 lbs. $159.959-7715-36 36˝ 3500 1⅛˝ SAE 8 46¼˝ 1.88˝ 1.88˝ 1˝ 38 lbs. $181.959-7716-8-S 8˝ 3500 1¼˝ SAE 8 18¼˝ 1.88˝ 1.88˝ 1˝ 23 lbs. $130.959-7716-8 8˝ 3500 1¼˝ SAE 8 20¼˝ 1.88˝ 1.88˝ 1˝ 23 lbs. $131.959-7716-10 10˝ 3500 1¼˝ SAE 8 20¼˝ 1.88˝ 1.88˝ 1˝ 25 lbs. $134.959-7716-12 12˝ 3500 1¼˝ SAE 8 22¼˝ 1.88˝ 1.88˝ 1˝ 26 lbs. $140.959-7716-14 14˝ 3500 1¼˝ SAE 8 24¼˝ 1.88˝ 1.88˝ 1˝ 28 lbs. $145.959-7716-16 16˝ 3500 1¼˝ SAE 8 26¼˝ 1.88˝ 1.88˝ 1˝ 30 lbs. $153.959-7716-24 24˝ 3500 1¼˝ SAE 8 34¼˝ 1.88˝ 1.88˝ 1˝ 36 lbs. $182.959-7716-30 30˝ 3500 1¼˝ SAE 8 40¼˝ 1.88˝ 1.88˝ 1˝ 41 lbs. $208.959-7716-36 36˝ 3500 1¼˝ SAE 8 46¼˝ 1.88˝ 1.88˝ 1˝ 46 lbs. $218.959-7717-6 6˝ 3500 1½˝ SAE 8 16¼˝ 2.13˝ 2.13˝ 1˝ 27 lbs. $156.959-7717-20 20˝ 3500 1½˝ SAE 8 30¼˝ 2.13˝ 2.13˝ 1˝ 41 lbs. $207.959-7717-30 30˝ 3500 1½˝ SAE 8 40¼˝ 2.13˝ 2.13˝ 1˝ 52 lbs. $251.959-7718-4 4˝ 3500 1¾˝ SAE 8 14¼˝ 2.13˝ 2.13˝ 1˝ 29 lbs. $168.959-7718-8-S 8˝ 3500 1¾˝ SAE 8 18¼˝ 2.13˝ 2.13˝ 1˝ 34 lbs. $184.959-7718-8 8˝ 3500 1¾˝ SAE 8 20¼˝ 2.13˝ 2.13˝ 1˝ 35 lbs. $187.959-7718-10 10˝ 3500 1¾˝ SAE 8 20¼˝ 2.13˝ 2.13˝ 1˝ 37 lbs. $192.959-7718-12 12˝ 3500 1¾˝ SAE 8 22¼˝ 2.13˝ 2.13˝ 1˝ 41 lbs. $199.959-7718-14 14˝ 3500 1¾˝ SAE 8 24¼˝ 2.13˝ 2.13˝ 1˝ 42 lbs. $207.959-7718-18 18˝ 3500 1¾˝ SAE 8 28¼˝ 2.13˝ 2.13˝ 1˝ 48 lbs. $223.959-7718-20 20˝ 3500 1¾˝ SAE 8 30¼˝ 2.13˝ 2.13˝ 1˝ 50 lbs. $232.959-7718-30 30˝ 3500 1¾˝ SAE 8 40¼˝ 2.13˝ 2.13˝ 1˝ 64 lbs. $282.959-7718-36 36˝ 3500 1¾˝ SAE 8 46¼˝ 2.13˝ 2.13˝ 1˝ 68 lbs. $310.959-7719-4 4˝ 3500 2˝ SAE 8 14¼˝ 2.38˝ 2.38˝ 1˝ 39 lbs. $219.959-7719-6 6˝ 3500 2˝ SAE 8 16¼˝ 2.38˝ 2.38˝ 1˝ 41 lbs. $229.959-7719-8-S 8˝ 3500 2˝ SAE 8 18¼˝ 2.38˝ 2.38˝ 1˝ 46 lbs. $239.959-7719-8 8˝ 3500 2˝ SAE 8 20¼˝ 2.38˝ 2.38˝ 1˝ 46 lbs. $244.959-7719-24 24˝ 3500 2˝ SAE 8 34¼˝ 2.38˝ 2.38˝ 1˝ 76 lbs. $326.959-7719-30 30˝ 3500 2˝ SAE 8 40¼˝ 2.38˝ 2.38˝ 1˝ 88 lbs. $371.959-7719-36 36˝ 3500 2˝ SAE 8 46¼˝ 2.38˝ 2.38˝ 1˝ 101 lbs. $408.95

Bore

2˝

2½˝

3˝

3½˝

4˝

• New, manufactured exclusively for Surplus Center. Heavy dutydouble acting cylinders. External gland for superior performanceat high pressure. Formed steel clevises for maximum durability.Excellent for many heavy duty mobile applications. Made in USA.Rated 3500 PSI.

1˝ x 9.468˝ x 0.551˝

ITEM 9-8397 $39.99SPECIFICATIONS • Ports• New, double acting rod SAE 4, base SAE 6• Bore x Stroke 1˝ x 9.468˝ • Rod end threaded ⅜-24• Pressure 1000 PSI max. • Base end tang ⅜˝ wide• Rod dia. 0.551˝ • Pin hole 5/16˝• Retracted lgth. 15⅝˝ • Shpg. 5 lbs.

1˝ x 20˝ x ¾˝

ITEM 9-7672 $59.99• Port at the end of the threaded base end.SPECIFICATIONS• New, double acting • Retracted lgth. 29¼˝• Bore x Stroke 1˝ x 20˝ • Threaded ends• Pressure 2500 PSI max. rod ⅝˝-18 x 3⅜˝• Rod dia. ¾˝ base ⅞˝-14 x 1⅜˝• Ports SAE 4 • Shpg. 10 lbs.

1⅛˝ x 20˝ x ¾˝

ITEM 9-8102 $49.99SPECIFICATIONS• Double acting • Retracted lgth. 40˝ total• Bore x Stroke 1⅛˝ x 20˝ • Rod threaded ⅝-18 x 3˝• Pressure 2500 PSI max. Total length 69/16˝• Rod dia. ¾˝ • Base end threaded ⅝-18• Ports SAE 6 Total length 7¼˝• Body length 26¼˝ • Shpg. 12 lbs.

Surplus Center Welded Clevis Cylinders

62 Double Acting Hydraulic Cylinders www.surpluscenter.com8

Bore

1¾˝

2˝

2½˝

2¾˝

3˝

3½˝

Picture Retracted Rod Base PinITEM Stroke Key PSI Rod Ports Lgth. Width Width Holes Shpg. Price

9-8332 13⅛˝ E 2500 1˝ SAE 6 20⅛˝ 2⅞˝ ¾˝ 1˝ 17 lbs. $79.999-8374 * 13⅛˝ E 2500 1˝ SAE 6 20⅛˝ 2⅞˝ ¾˝ 1˝ 17 lbs. $79.999-8785 14½˝ B 2500 1¼˝ SAE 6 21˝ 3⅜˝ 4¼˝ 1˝ 19 lbs. $89.999-8769 15¼˝ B 2500 1¼˝ SAE 6 22˝ 3½˝ 4⅝˝ 1˝ 20 lbs. $99.999-8763 15½˝ E 2500 1¼˝ SAE 6 24¾˝ 2⅞˝ ¾˝ 1˝ 21 lbs. $89.999-8756 16˝ G 2500 1¼˝ SAE 6 24˝ 29/16˝ 1⅞˝ 1˝ 22 lbs. $69.999-8759 16˝ G 2500 1¼˝ SAE 6 24˝ 29/16˝ 1⅞˝ 1˝ 22 lbs. $69.999-8761 18⅜˝ I 2500 1¼˝ SAE 6 26⅛˝ 2⅞˝ 1⅞˝ 1˝ 24 lbs. $69.999-8762 9˝ B 2500 1¼˝ SAE 6 16˝ 2˝ 3¼˝ 1˝ 20 lbs. $89.999-8760 13¼˝ B 2500 1¼˝ SAE 6 20½˝ 2⅞˝ 3⅜˝ 1˝ 22 lbs. $69.999-8757 13½˝ G 3000 1˝ SAE 6 21¼˝ 2⅝˝ 1¾˝ ¾˝ 15 lbs. $89.999-8758 16¾˝ B 2500 1¼˝ SAE 6 24˝ 2⅞˝ 35/16˝ 1˝ 24 lbs. $69.999-8766 17⅞˝ G 2500 1½˝ SAE 8 27⅛˝ 39/16˝ 2⅞˝ 1˝ 32 lbs. $89.999-8768 18˝ H 2500 1¼˝ SAE 8 33⅜˝ 39/16˝ 2⅞˝ 1˝ 32 lbs. $99.999-8764 18½˝ G 2500 1½˝ SAE 8 29⅜˝ 3¼˝ 2⅞˝ 1˝ 34 lbs. $89.999-8765 26⅝˝ D 3000 1½˝ SAE 8 37˝ 21/16˝ 2⅞˝ 1¼˝ 44 lbs. $89.999-8362 8⅞˝ F 3000 1¼˝ SAE 6 16˝ 2˝ 3¼˝ 1˝ 22 lbs. $69.999-8346 1715/16˝ F 3090 1¼˝ SAE 8 307/16˝ 39/16˝ 3¼˝ 1˝ 33 lbs. $99.999-7164 * 1911/16˝ A 3000 1½˝ SAE 8 2911/16˝ 2¼˝ 3¼˝ 1⅛˝ 39 lbs. $109.959-8326 * 23½˝ A 2500 1½˝ SAE 8 34½˝ 3¼˝ 3¼˝ 1˝ 38 lbs. $89.999-8338 23½˝ A 2500 1½˝ SAE 8 34½˝ 3¼˝ 3¼˝ 1˝ 38 lbs. $99.999-8767 25½˝ G 2500 1½˝ SAE 8 39˝ 3¾˝ 2⅞˝ 1¼˝ 49 lbs. $99.999-7338 + 15˝ C 3200 1½˝ SAE 8 55˝ 211/16˝ 5˝ 1¼˝ 39 lbs. $109.999-7339 + 15˝ C 3200 1½˝ SAE 8 61˝ 211/16˝ 5˝ 1¼˝ 60 lbs. $109.999-7340 15˝ C 3200 1½˝ SAE 8 61˝ 211/16˝ 5˝ 1¼˝ 60 lbs. $109.999-7341 * 15˝ C 3200 1½˝ SAE 8 61˝ 211/16˝ 5˝ 1¼˝ 60 lbs. $109.999-7343 11⅛˝ C 3200 1½˝ SAE 8 63½˝ 211/16˝ 5˝ 1¼˝ 65 lbs. $109.999-7344 * 14⅛˝ C 3200 1½˝ SAE 8 63½˝ 211/16˝ 5˝ 1¼˝ 65 lbs. $109.999-8327 26⅝˝ D 2210 1½˝ SAE 8 36⅝˝ 21/16˝ 2¾˝ 1¼˝ 57 lbs. $149.99

1⅜˝ x 36˝ x ¾˝

ITEM 9-7839 $79.99SPECIFICATIONS• New double acting • Overall retracted lgth. 55⅜˝• Bore x Stroke 1⅜˝ x 36˝ • Threaded ends• Pressure 2500 PSI max. Rod ⅝-18 x 4˝• Rod dia. ¾˝ Base ⅝-18 x 7⅝˝• Ports SAE 4 • Shpg. 18 lbs.

1½˝ x 2¾˝ x ¾˝

ITEM 9-8649 $79.95SPECIFICATIONS• New, PRINCE • Retracted lgth. 7¾˝• Double acting • Rod end thru-hole• Bore x Stroke 1½˝ x 2¾˝ width 0.725˝,• Barrel thickness ⅛˝ turned down at end• Pressure 2500 PSI max. • Base tang ¾˝ thick max.• Rod dia. ¾˝ • Pin holes ⅜˝• Ports SAE 4 • Shpg. 5 lbs.

1½˝ x 6˝ x ½˝

ITEM 9-8651 $59.95SPECIFICATIONS• New, PRINCE • Ports JIC 6M• Double acting • Retracted lgth. 12½˝• Bore x Stroke 1½˝ x 6˝ • Rod crosstube 1˝ wide• Barrel thickness ⅛˝ • Base tang 1˝ thick• Pressure 1500 PSI max. • Pin holes ¾˝• Rod dia. ½˝ • Shpg. 7 lbs.

Cross Double Acting Loader Cylinders

A B C

D E F

G H I

• New hydraulic cylinders manufactured by CROSS for many popular loaders and other mobile equipment. Welded construction.Painted red, except numbers with * painted black, + are unpainted

Additional information, including port configurations and line drawings available on our website.

800-488-3407 Double Acting Hydraulic Cylinders 63&

2˝ x 12˝ x 1⅛˝

ITEM 9-8646 $89.95• New, PRINCE. Port block on base end.Ports face base end. Manifold tube.SPECIFICATIONS• Double acting • Ports SAE 4• Bore x Stroke 2˝ x 12˝ • Retracted lgth. 18˝• Barrel thickness 3/16˝ • Crosstube ends 2⅞˝ wide• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1⅛˝ • Shpg. 17 lbs.

2˝ x 11¼˝ x 1˝

ITEM 9-8171 $59.99SPECIFICATIONS • Rod dia. 1˝• Unused, old inventory • Ports SAE 6• Double acting • Retracted lgth. 18½˝• Bore x Stroke 2˝ x 11¼˝ • Rod threaded 1˝-16 x 1-½˝• Barrel thickness 3/16˝ • Base tapped 1˝-16 x 2˝• Pressure 3000 PSI max. • Shpg. 14 lbs.

2˝ x 9⅜˝ x 1˝

ITEM 9-9271 $69.95SPECIFICATIONS• New, old inventory • Tang ends w/ swivel ball• Double acting and mounting block• Bore x Stroke2˝ x 9⅜˝ • Block overall width 4.394˝• Pressure 3000 PSI max. • Block width/height• Rod dia. 1˝ 1.130˝/0.628˝• Wall thickness 3/16˝ • Mtg. holes• Ports SAE 4 (2) 0.661˝ dia., 3˝ c-c • Retracted lgth. 18½˝ • Shpg. 19 lbs.

2˝ x 9˝ x 1⅛˝

ITEM 9-9883 $69.95• Unused, old inventory.SPECIFICATIONS• Unused, old inventory • Ports SAE 4• Double acting • Retracted lgth. 16½˝• Bore x Stroke 2˝ x 9˝ • Crosstube ends• Pressure 3000 PSI max. rod 2¼˝ w., base 3˝ w.• Barrel thickness ¼˝ • Pin holes 1˝• Rod dia. 1⅛˝ • Shpg. 17 lbs.

2˝ x 6˝ x 1⅛˝

ITEM 9-8469 $59.95• New, welded hydraulic cylinder with in-ternal, wire-lock gland retainer. Both portsoffset 45° from axis of pins. 3/16˝ barrel tub-ing thickness.SPECIFICATIONS• Double acting • Retracted lgth. 11¾˝• Bore x Stroke 2˝ x 6˝ • Crosstube ends• Pressure 3000 PSI max. rod 2½˝ w., base 3½˝ w.• Rod dia. 1⅛˝ • Pin holes 1˝• Ports ⅜˝ NPT • Shpg. 11 lbs.

2˝ x 4˝ x 1¼˝

ITEM 9-7578 $89.95SPECIFICATIONS• New • Ports SAE 8• Double acting • Retracted lgth. 14˝• Bore x Stroke 2˝ x 4˝ • Tang ends• Barrel thickness ¼˝ rod 1⅛˝ w., base 1¼˝ w.• Pressure 3000 PSI max. • Pin holes 1¼˝• Rod dia. 1¼˝ • Shpg. 16 lbs.

2˝ x 2˝ x 1⅛˝

ITEM 9-8597 $59.95• Internal bushing to limit stroke (could beremoved for a 4˝ stroke).SPECIFICATIONS • Ports ⅜˝ NPT• New, double acting • Retracted lgth. 14¼˝• Bore x Stroke 2˝ x 2˝ • Clevis ends 2.56˝ wide• Pressure 2500 PSI • Pin holes 1˝• Rod dia. 1⅛˝ • Shpg. 18 lbs.

0.866˝ x 11¼˝ x 0.393˝(22mm x 285.75mm x 10mm)

ITEM 9-7919$19.99

• New, low pressure cylinder. Hoses con-nect to work ports. Hoses are ParkerPolyflex 263 DN2 WP rated for pressuresup to 20 MPa (2900 PSI). Retract hosemeasures 71˝, extend hose measures 61˝.SPECIFICATIONS• Double acting • Ports DIN metric 6L female• Bore x Stroke • Retracted lgth. 15¼˝22mm x 285.75mm • Rod tang 14mm thick(0.866˝ x 11¼˝) (0.542˝)

• Barrel thickness 3/32˝ Pin hole 8mm (0.316˝)• Pressure unknown • Base end flat• Rod dia. 10mm (0.393˝) • Shpg. 4 lbs.

1½˝ x 6˝ x ¾˝

ITEM 9-8707 $84.95SPECIFICATIONS • Rod dia. ¾˝• New • Ports SAE 6• Double acting • Retracted lgth. 13˝• Bore x Stroke 1½˝ x 6˝ • Clevis ends 19/16˝ wide• Barrel thickness 3/16˝ • Pin holes ½˝• Pressure 3000 PSI max. • Shpg. 9 lbs.

1½˝ x 24˝ x ¾˝

ITEM 9-8294 $69.99SPECIFICATIONS• New double acting • Overall retracted lgth. 48⅜˝• Bore x Stroke 1½˝ x 24˝ • Threaded ends• Pressure 1500 PSI max. Rod ¾-16 x 7˝• Rod dia. ¾˝ Base ¾-16 x 2½˝• Ports SAE 4 • Shpg. 15 lbs.

1⅞˝ x 5˝ x 1˝

ITEM 9-8158 $79.95SPECIFICATIONS• Unused, old inventory • Ports SAE 8• Double acting • Retracted lgth. 15⅛˝• Bore x Stroke 1⅞˝ x 5˝ • Rod tang w/ swivel eye ⅞˝• Barrel thickness 3/16˝ • Base clevis 2¼˝ wide• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1˝ • Shpg. 12 lbs.

1¾˝ x 15.56˝ x 1˝

ITEM 9-8434 $79.99SPECIFICATIONS• New, double acting • Retracted lgth. 22⅞˝• Bore x Stroke 1¾˝ x 159/16˝ • Rod crosstube 2⅝˝ wide• Pressure 3000 PSI max. • Base thru-hole O.D. 1⅞˝• Rod dia. 1˝ • Pin holes ¾˝• Ports JIC 6M • Shpg. 17 lbs.

1¾˝ x 14¼˝ x 1˝

ITEM 9-8433 $79.99SPECIFICATIONS• New, double acting • Retracted lgth. 28¼˝• Bore x Stroke 1¾˝ x 14¼˝ • Rod end crosstube 2⅝˝ w.• Pressure 3000 PSI max. • Base end thru-hole O.D. 1⅞˝• Rod dia. 1˝ • Pin holes ¾˝• Ports JIC 6M • Shpg. 18 lbs.

2˝ x 8˝ x 1˝

ITEM 9-8650 $79.95SPECIFICATIONS• New, PRINCE • Ports SAE 4• Double acting • Retracted lgth. 12˝• Bore x Stroke 2˝ x 8˝ • Rod thru-hole 0.975˝ wide• Barrel thickness ⅛˝ • Base tang 1˝ thick• Pressure 2500 PSI max. • Pin holes ½˝• Rod dia. 1˝ • Shpg. 9 lbs.

2˝ x 13⅛˝ x 1˝

ITEM 9-6106 $59.95SPECIFICATIONS• Double acting • Threaded rod• Bore/stroke 2˝ x 13⅛˝ metric M20 2.50• PSI 2500 max. pitch x 1⅝˝ long end• Rod diam. 1˝ • Tang base ¾˝ wide• Ports SAE 4 pin hole ⅞˝• Retracted lgth. 19¾˝ • Shpg. 14 lbs.


2¼˝ x 15˝ x 1⅛˝

ITEM 9-9200 $69.99SPECIFICATIONS• New, double acting • Retracted lgth. 285/16˝• Bore x Stroke 2¼˝ x 15˝ • Clevis ends 27/16˝ wide• Pressure 3000 PSI • Pin holes• Rod dia. 1⅛˝ rod 1¼˝, base 1˝• Ports SAE 4 • Shpg. 28 lbs.

2˝ x 30˝ x 1¼˝

ITEM 9-8398 $129.99SPECIFICATIONS • Ports SAE 8• New DALTON • Retracted lgth. 46¼˝• Double acting • Clevis ends• Bore x Stroke 2˝ x 30˝ rod 2⅝˝ w., base 2⅛˝ w.• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1¼˝ • Shpg. 45 lbs.

2˝ x 70˝ x 1¼˝

ITEM 9-8164 $279.95• Transfer tube, both ports on base end ofcylinder barrel. Adjustable cushion valve inthe extend port.SPECIFICATIONS • Ports SAE 8• New, old inventory • Retracted lgth. 84⅛˝• Double acting • Crosstube ends• Bore x Stroke 2˝ x 70˝ rod 2½˝ w., base 2˝ w.• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1¼˝ • Shpg. 74 lbs.

2¼˝ x 18½˝ x 1⅜˝

ITEM 9-7914 $99.99SPECIFICATIONS • Ports SAE 6• New, double acting • Retracted lgth. 30½˝• Bore x stroke 2¼˝ x 18½˝ • Crosstube ends 2⅝˝ wide• Pressure 2500 PSI max. • Pin holes rod 1⅜˝, base 1˝• Rod dia. 1⅜˝ • Shpg. 27 lbs.

2¼˝ x 20⅞˝ x 1¼˝

ITEM 9-8432 $89.99SPECIFICATIONS• New, double acting • Retracted lgth. 297/16˝• Bore x Stroke 2¼˝ x 20⅞˝ • Crosstube ends• Pressure 3000 PSI max. rod 45/16˝ w., base 3˝ w.• Rod dia. 1¼˝ • Pin holes 1˝• Ports JIC 6M • Shpg. 29 lbs.

2¼˝ x 23⅝˝ x 1⅜˝

ITEM 9-8078 $79.99SPECIFICATIONS• New, double acting • Retracted lgth. 31˝• Bore x Stroke 2¼˝ x 23⅝˝ • Rod end crosstube 3˝ w.• Pressure 2500 PSI max. • Base end tang 2˝ wide• Rod dia. 1⅜˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 34 lbs.

2¼˝ x 21⅛˝ x 1⅜˝

ITEM 9-8077 $79.99SPECIFICATIONS• New, double acting • Retracted lgth. 28½˝• Bore x Stroke 2¼˝ x 21⅛˝ • Rod end crosstube 3˝ w.• Pressure 2500 PSI max. • Base end tang 2˝ wide• Rod dia. 1⅜˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 32 lbs.

2¼˝ x 19˝ x 1¼˝

ITEM 9-8487 $59.99SPECIFICATIONS • Retracted lgth. 26˝• New, double acting • Rod crosstube 1¾˝ wide• Bore x Stroke 2¼˝ x 19˝ • Base end thru-hole• Pressure 3000 PSI max. Outside width 2¾˝• Rod dia. 1¼˝ • Pin holes 1¼˝• Ports SAE 8 • Shpg. 27 lbs.

2¼˝ x 20½˝ x 1⅜˝

ITEM 9-8486 $59.99SPECIFICATIONS • Retracted lgth. 27½˝• New, double acting • Rod crosstube 3⅜˝ wide• Bore x Stroke 2¼˝ x 20½˝ • Base end thru-hole• Pressure 3000 PSI max. Outside width 2¾˝• Rod dia. 1⅜˝ • Pin holes 1¼˝• Ports SAE 8 • Shpg. 31 lbs.

2¼˝ x 199/16˝ x 1¼˝

ITEM 9-8431 $89.99• New. Ports offset 90° facing base end.SPECIFICATIONS• Double acting • Retracted lgth. 297/16˝• Bore x Stroke 2¼˝ x 199/16˝ • Crosstube ends• Pressure 3000 PSI max. rod 45/16˝ w., base 3˝ w.• Rod dia. 1¼˝ • Pin holes 1˝• Ports JIC 6M • Shpg. 29 lbs.

2˝ x 24˝ x 1˝

ITEM 9-8291 $79.99SPECIFICATIONS• New double acting • Overall retracted lgth. 43½˝• Bore x Stroke 2˝ x 24˝ • Threaded ends• Pressure 2500 PSI max. Rod ¾-16 x 7˝• Rod dia. 1˝ Base ¾-16 x 2½˝• Ports SAE 4 • Shpg. 21 lbs.

2˝ x 19¼˝ x 1¼˝

ITEM 9-8443 $89.99SPECIFICATIONS• New, double acting • Retracted lgth. 26⅞˝• Bore x Stroke 2˝ x 19¼˝ • Rod end crosstube 2¾˝• Pressure 3000 PSI max. • Base thru-hole O.D. 2¼˝• Rod dia. 1¼˝ • Pin holes 1⅛˝• Ports SAE 6 • Shpg. 25 lbs.

2˝ x 17½˝ x 1¼˝

ITEM 9-9197 $89.95SPECIFICATIONS• Unused, old inventory • Ports SAE 6• Double acting • Retracted lgth. 28¼˝• Bore x Stroke 2˝ x 17½˝ • Clevis ends• Barrel thickness ¼˝ rod 2¼˝ w., base 29/32˝ w.• Pressure 3000 PSI max. • Pin holes 1⅛˝• Rod dia. 1¼˝ • Shpg. 28 lbs.

2˝ x 38˝ x 1½˝

ITEM 9-8307 $169.99• New, PRINCE. Four bolt round flange onbarrel end measures 4½˝ O.D.SPECIFICATIONS• Double acting • Retracted lgth. 45˝• Bore x Stroke 2˝ x 38˝ • Rod 4 bolt mtg. flange• Pressure 3000 PSI max. 2⅝˝ x 3⅝˝ centers• Rod dia. 1½˝ ⅜˝ mounting holes• Barrel thickness 3/16˝ • Base tapped ½-13 x ¾˝• Ports SAE 4 • Shpg. 46 lbs.

2˝ x 30˝ x 1⅛˝

ITEM 9-8748 $159.99• New, welded cylinder with thread-ingland cap. Rod end is threaded 1⅛˝-12 x1¾˝ long for thread-on clevis.SPECIFICATIONS• Double acting • Ports SAE 8• Bore x Stroke 2˝ x 30˝ • Retracted lgth. 40¼˝• Barrel thickness 3/16˝ • Clevis ends• PSI max. rod 2½˝ w., base 217/32˝ w.1524 pull, 3000 push • Pin holes 1˝

• Rod dia. 1⅛˝ • Shpg. 32 lbs.

2˝ x 17˝ x 1¼˝

ITEM 9-7913 $69.99SPECIFICATIONS • Ports SAE 6• New, double acting • Retracted lgth. 31˝• Bore x stroke 2˝ x 17˝ • Crosstube ends 2⅝˝ wide• Pressure 2500 PSI max. • Pin holes rod 1⅜˝, base 1˝• Rod dia. 1¼˝ • Shpg. 19 lbs.

2˝ x 14˝ x 1⅛˝

ITEM 9-8605 $59.95SPECIFICATIONS • Ports SAE 8• New, double acting • Retracted lgth. 24¼˝• Bore x Stroke 2˝ x 14˝ • Clevis ends• Pressure 2500 PSI max. rod 2½˝ w., base 2⅝˝ w.• Rod dia. 1⅛˝ • Pin holes 1˝• Wall thickness 3/16˝ • Shpg. 23 lbs.

2¼˝ x 17˝ x 1˝

ITEM 9-9382 $69.95SPECIFICATIONS• Unused, old inventory • Ports JIC 8 male• Double acting • Retracted lgth. 25¾˝• Bore x Stroke 2¼˝ x 17˝ • Rod tang 19/16˝ thick• Barrel thickness 3/16˝ • Base crosstube 211/16˝ w.• Pressure 3000 PSI max. • Pin holes 1⅜˝• Rod dia. 1˝ • Shpg. 23 lbs.


2⅜˝ x 19⅜˝ x 1½˝

ITEM 9-8445 $89.99SPECIFICATIONS• New, double acting • Retracted lgth. 27¼˝• Bore x Stroke 2⅜˝ x 19⅜˝ • Rod crosstube 2¾˝ wide• Pressure 3000 PSI max. • Base thru-hole O.D. 2¼˝• Rod dia. 1½˝ • Pin holes 1¼˝• Ports SAE 6 • Shpg. 31 lbs.

2½˝ x ¼˝ x 1˝Double Acting Cylinder

ITEM 9-9803 $59.99SPECIFICATIONS• New Milwaukee Cylinders Model B9216• Double acting tie rod • Rod dia. 1˝• Bore x Stroke • Ports ⅜˝ NPT2½˝ x ¼˝ • Rod threaded ⅞-14

• Pressure 1500 PSI • Base end blank• Retracted lgth. 12⅛˝ • Shpg. 12 lbs.

2¼˝ x 60˝ x 1¼˝

ITEM 9-9084 $197.95SPECIFICATIONS• Unused , old inventory • Ports SAE 6• Double acting • Retracted lgth. 68⅝˝• Bore x Stroke 2¼˝ x 60˝ • Rod crosstube 1½˝ w.• Barrel thickness ¼˝ • Base tang 1½˝ thick• Pressure 3000 PSI max. • Pin holes ⅞˝• Rod dia. 1¼˝ • Shpg. 66 lbs.

2⅜˝ x 15⅝˝ x 1⅜˝

ITEM 9-9154 $69.95• Unused, old inventory. Ports are offset90° and both face base end.SPECIFICATIONS• Double acting • Ports SAE 6• Bore x Stroke 2⅜˝ x 15⅝˝ • Retracted lgth. 26½˝• Barrel thickness ¼˝ • Tang ends 113/16˝ thick• Pressure 3000 PSI max. • Pin holes 1⅜˝• Rod dia. 1⅜˝ • Shpg. 33 lbs.

2.5˝ x 1.9˝ x 2˝

ITEM 9-8643$69.95• New, PRINCE. Port block on base end ofbarrel with ports facing opposite direc-tions. One SUN Model CWCG-LGN ventedcounterbalance valve with 5:1 pilot ratio,rated for 15 GPM, set at 3700 PSI.SPECIFICATIONS• Double acting • Rod 10° spherical radius• Bore x Stroke 2.5˝ x 1.9˝ Dia. 2˝, turned down at end• Barrel thickness ¼˝ • Base 4 bolt mtg. flange• Pressure 1500 PSI max. 4⅝˝ x 4⅝˝ x 1⅜˝• Rod dia. 2˝ Centers 3.36˝ square• Ports SAE 4 Pin holes 11/16˝• Retracted lgth. 715/16˝ • Shpg. 22 lbs.

2½˝ x 10˝ x 1˝

ITEM 9-9229 $79.95• Unused, old inventory. Thread-oncrosstube assembly for rod end. SAE 6 fe-male ports with SAE 6 male swivel to JIC6 male 90° adapters.SPECIFICATIONS • Rod thread-on• Double acting crosstube assembly• Bore x Stroke 2½˝ x 10˝ 1˝-14 x 2¾˝• Pressure 3000 PSI max. Crosstube width 39/16˝• Rod dia. 1˝ Pin hole 0.780˝• Barrel thickness 3/16˝ • Base tang 2˝ thick• Ports SAE 6 Pin hole 11/16˝• Retracted lgth. 22˝ • Shpg. 18 lbs.

2½˝ x 9½˝ x 1¼˝

ITEM 9-10613 $69.99• New. Manifold port block with two 5/16˝ports and four mounting holes tapped ¼˝-20 on 2.75˝ x 2.5˝ centers. Port block alsohas one SAE 4 port facing rod end of barrel.SPECIFICATIONS • Port manifold, see above• Double acting • Retracted lgth. 17⅝˝• Bore x Stroke 2½˝ x 9½˝ • Crosstube ends• Barrel thickness ¼˝ rod 2⅞˝ w., base 35/16˝ w.• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1¼˝ • Shpg. 28 lbs.

2½˝ x 7˝ x 1⅛˝DA Rephasing Cylinder

ITEM 9-7478 $49.95• New, rephasing cylinder with internal ballchecks to ease cylinder start-up at bothends of stroke.SPECIFICATIONS • Threaded rod end• Double acting 1˝-16 x 1½˝ threaded• Bore x stroke 2½˝ x 7˝ 1˝ across wrench flats• Pressure 2500 PSI max. • Tapped base end• Rod dia. 1⅛˝ 2½˝ O.D.• Ports SAE 6 Tapped 1⅛˝-12 x 1¾ ̋deep• Retracted lgth. 15˝ • Shpg. 19 lbs.

2½˝ x 8¾˝ x 1½˝

ITEM 9-8071 $109.95• Removable 0.078˝ orifice plate in extendport. “50220942” stamped in barrel.SPECIFICATIONS• New, double acting • Retracted lgth. 19¾˝• Bore x stroke 2½˝ x 8¾˝ • Crosstube ends• Pressure 3000 PSI max. rod 2¼˝ w., base 3¼˝ w.• Rod dia. 1½˝ • Pin holes 1⅛˝• Ports SAE 8 (see above) • Shpg. 23 lbs.

ITEM 9-8072 $109.95• Same as ITEM 9-8071 above except“027309”, “20942” and “T57744” stampedin barrel.

2½˝ x 7⅜˝ x 1˝

ITEM 9-7251 $69.95SPECIFICATIONS • Retracted lgth. 12¼˝• New double acting • Rod end ⅝-18 internal• Bore/stroke 2½˝ x 7⅜˝ tapped w/wrench flats• 1200 PSI max. • Base plain• Rod diam. 1˝ outer width 2⅞˝• Ports SAE 6 • Shpg. 13 lbs.

2½˝ x 8˝ x 1⅛˝

ITEM 9-8167 $64.95SPECIFICATIONS • Ports SAE 8• Double acting • Retracted lgth. 16½˝• Bore x Stroke 2½˝ x 8˝ • Rod end tapped ¾-16• Pressure 3000 PSI max. • Base tang w/swivel eye 1 ̋w.• Rod dia. 1⅛˝ • Pin hole 1˝• Wall thickness ¼˝ • Shpg. 20 lbs.

2½˝ x 10˝ x 1˝

ITEM 9-9270 $79.95SPECIFICATIONS• New, old inventory • Ports SAE 6• Double acting • Retracted lgth. 20½˝• Bore x Stroke 2½˝ x 10˝ • Rod end threaded 1-14 x 2¼˝• Pressure 3000 PSI max. • Base end tang 0.492˝ wide• Rod dia. 1˝ • Pin hole 1˝• Wall thickness 3/16˝ • Shpg. 15 lbs.

2½˝ x 10˝ x 1¼˝• Unused, old inventory. Welded cylinderswith thread-in gland cap. Transfer tube.SPECIFICATIONS FOR BOTH• Double acting • Retracted lgth. 18¾˝• Bore x Stroke 2½˝ x 10˝ • Crosstube ends• Barrel thickness ¼˝ rod 2½˝ w.,• Pressure 3000 PSI max. base 3⅞˝ w.• Rod dia. 1¼˝ • Pin holes 1¼˝• Ports SAE 6 • Shpg. 30 lbs.

ITEM 9-9264 $89.95• Port block contains two counterbalancevalves with 1.5:1 pilot ratio, rated for 15GPM, and set at 3000 PSI. Ports face op-posite ends of barrel.

ITEM 9-9264-A $89.95• Port block contains two relief valvesrated for 25 GPM and set at 3000 PSI.Both ports face same direction.

Retracted Length

Retracted LengthIs Measured Pin Center to Pin Center

’’


2½˝ x 20˝ x 1¼˝

ITEM 9-8731-2.5-20 $80.95SPECIFICATIONS • Ports SAE 8• New, double acting • Retracted lgth. 30¼˝• Bore x Stroke 2½˝ x 20˝ • Clevis ends 2½˝ wide• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1¼˝ • Shpg. 31 lbs.

2½˝ x 28¼˝ x 1¾˝

ITEM 9-9215 $114.95• Unused, old inventory. Base end portblock has four extend ports. One side hasone SAE 4 port and one SAE 6 port. Otherside has a SAE 6 port, and one SAE 8 portfaces rod end of barrel.SPECIFICATIONS • Extend port SAE 4/6/8• Double acting • Retract port SAE 6• Bore x Stroke 2½˝ x 28¼˝ • Retracted lgth. 43˝• Barrel thickness ¼˝ • Crosstube ends 6⅜˝ wide• Pressure 3000 PSI max. • Pin holes 1⅜˝• Rod dia. 1¾˝ • Shpg. 68 lbs.

2½˝ x 24˝ x 1⅜˝

ITEM 9-8648 $79.95• New, PRINCE. Four SAE 6 ports on sideof cylinder barrel. Cushions at both endsof stroke.SPECIFICATIONS• Double acting • Rod end machined groove• Bore x Stroke 2½˝ x 24˝ 0.87˝ dia. x 0.82˝ width• Barrel thickness ¼˝ O.D. 1¼˝• Pressure 3000 PSI max. Mtg. flange to rod end 2¾˝• Rod dia. 1⅜˝ • Front mount 4 bolt flange• Ports SAE 12 3½˝ x 5⅝˝ x 1½˝• Overall lgth. 36½˝ 9/16 ̋holes on 2.55 ̋x 4.62 ̋c/c• Shpg. 62 lbs. • Base end flat

2½˝ x 12˝ x 1¼˝

ITEM 9-8427 $79.99SPECIFICATIONS • Retracted lgth. 19⅜˝• New, double acting • Rod end external threaded• Bore x Stroke 2½˝ x 12˝ thread 11/16-12• Pressure 3000 PSI max. • Base end crosstube 4½˝ w.• Rod dia. 1¼˝ Pin hole 1˝• Ports ½˝ NPT • Shpg. 21 lbs.

2½˝ x 15˝ x 1½˝

ITEM 9-7679 $99.99SPECIFICATIONS • Retracted lgth. 39½˝• New, Double acting • Swivel eye ends• Bore x Stroke 2½˝ x 15˝ rod 1⅜˝ w., base 13/16˝ w.• Pressure 3000 PSI max. • Pin holes• Rod dia. 1½˝ rod 1˝, base 1¼˝• Ports SAE 6 • Shpg. 38 lbs.

2½˝ x 10˝ x 1½˝

ITEM 9-9884 $89.95SPECIFICATIONS • Rod threaded w/thru-hole• New, double acting 1¼-12 x 23/16˝ long• Bore x Stroke 2½˝ x 10˝ Thru hole dia. 3/16˝• Pressure 3000 PSI max. • Base end plate• Rod dia. 1½˝ 815/16˝ lgth. x 3¼˝ wide• Ports ½˝ NPT & ¾˝ NPT four 9/16˝ holesextend, ⅜˝ NPT retract on 7½˝ x 2˝ ctrs.

• Overall lgth. 18˝ • Shpg. 24 lbs.

2½˝ x 11˝ x 1¼˝

ITEM 9-7379 $149.95• Unused, old inventory. Ports have inter-nal restrictors and face each other.SPECIFICATIONS • Retracted lgth. 273/8˝• Double acting • Rod tapped ¾-10 x 1⅛˝• Bore x Stroke 2½˝ x 11˝ • Body mount brackets• Barrel thickness 3/16˝ 1⅜˝ x 1˝ thick• Pressure 2500 PSI max. bracket spacing ¼˝• Rod dia. 1¼˝, two mounting holes ⅜˝• Ports SAE 6 • Shpg. 22 lbs.

2½˝ x 11˝ x 1¼˝

ITEM 9-9479 $89.95SPECIFICATIONS • Rod dia. 1¼˝• Unused, old inventory • Ports SAE 6• Double acting • Retracted lgth. 22⅝˝• Bore x Stroke 2½˝ x 11˝ • Tang ends 1½˝ thick• Barrel thickness 3/16˝ • Pin holes 1˝• Pressure 3000 PSI max. • Shpg. 22 lbs.

2½˝ x 15˝ x 1½˝

ITEM 9-8647 $89.95SPECIFICATIONS • Rod dia. 1½˝• New, PRINCE • Ports ⅜˝ NPT• Double acting • Retracted lgth. 28˝• Bore x Stroke 2½˝ x 15˝ • Clevis ends 2⅛˝ wide• Barrel thickness 3/16˝ • Pin holes 1˝• Pressure 2500 PSI max. • Shpg. 29 lbs.

2½˝ x 19¼˝ x 1¼˝

ITEM 9-8391 $109.99SPECIFICATIONS• New, double acting • Retracted lgth. 30˝• Bore x stroke 2½˝ x 19¼˝ • Rod crosstube 25/16˝ wide• Pressure 3000 PSI max. • Base crosshole 2¾˝ wide• Rod dia. 1¼˝ • Pin holes 25 mm (0.984˝)• Ports JIC 8 male • Shpg. 38 lbs.

2½˝ x 17˝ x 1¼˝

ITEM 9-5451 $89.95SPECIFICATIONS• New double acting • Retracted lgth. 46½˝• Bore/stroke 2½˝ x 17˝ • Crosstube ends• 3200 PSI rod 2¾˝ w., base 4½˝ w.• Rod diam. 1¼˝ • Pin holes 1¼˝• Ports SAE 8 • Shpg. 39 lbs.

2½˝ x 18¼˝ x 1½˝

ITEM 9-8441 $89.99SPECIFICATIONS• New, double acting • Retracted lgth. 31¾˝• Bore x Stroke 2½˝ x 18¼˝ • Rod crosstube 3½˝ wide• Pressure 3000 PSI max. • Base thru-hole O.D. 2¾˝• Rod dia. 1½˝ • Pin holes 1¼˝• Ports SAE 6 • Shpg. 36 lbs.

2½˝ x 18˝ x 17/16˝

ITEM 9-6119 $139.95SPECIFICATIONS• Double acting • Retracted lgth. 28½˝• Bore/stroke 2½˝ x 18˝ • Tang ends 2½˝ wide• PSI 2500 max. • Pin holes• Rod diam. 17/16˝ rod 15/16˝, base 23/16˝• Ports SAE 8 • Shpg. 36 lbs.

2½˝ x 20¼˝ x 1¼˝

ITEM 9-5124 $149.99SPECIFICATIONS• New double acting • Retracted lgth. 28¼˝• Bore/stroke 2½˝ x 20¼˝ • Crosstube ends• 3200 PSI rod 4⅝˝w., base 3¼˝w.• Rod diam. 1¼˝ • Pin holes 11/16˝• Ports SAE 8 • Shpg. 31 lbs.

2½˝ x 24˝ x 1½˝

ITEM 9-5576 $109.99SPECIFICATIONS • Retracted lgth. 50¼˝• New, double acting • Rod crosstube 2¾˝ wide• Bore x stroke 2½˝ x 24˝ pin hole 1½˝• Pressure 2500 PSI max. • Base tang 1½˝ wide• Rod dia. 1½˝ pin hole 2⅜˝• Ports SAE 8 • Shpg. 62 lbs.

ITEM 9-7696 $159.99• Same as above except 3000 PSI.

2½˝ x 22½˝ x 1½˝

SPECIFICATIONS • Retracted lgth. 31¼˝• New, double acting • Rod end crosstube 3¼˝ w.• Bore x Stroke 2½˝ x 22½˝ Pin hole 1⅜˝• Pressure 3000 PSI max. • Base end thru-hole 2⅝˝ w.• Rod dia. 1½˝ Pin hole 1¼˝• Ports SAE 6 • Shpg. 39 lbs.

ITEM 9-7828 $99.99• New. Ports are 90° of each other with theretract port facing left while viewing the ex-tend port.

ITEM 9-7829 $99.99• New. Ports are 90° of each other with theretract port facing right while viewing theextend port.


2.559˝ x 27.756˝ x 1.575˝(65mm x 705mm x 40mm)

ITEM 9-8316 $109.95SPECIFICATIONS• New double acting • Retract port metric• Bore x Stroke 12S Series M20 x 1.565mm x 705mm compression fitting (female)(2.559˝ x 27.756˝) • Retracted lgth.

• Barrel thickness 975mm (38.385˝)7.5mm (0.295˝) • Tang ends with swivel eye

• Pressure 3000 PSI max. thickness 35mm (1.378˝)• Rod dia. 40mm (1.575˝) • Pin holes 35mm (1.378˝)• Extend port metric M16 x 1.5 • Shpg. 56 lbs.

2¾˝ x 12˝ x 1¼˝

ITEM 9-5380 $89.50SPECIFICATIONS • Ports SAE 6• New, double acting • Retracted lgth. 22⅛˝• Bore x stroke 2¾˝ x 12˝ • Clevis ends 25/16˝ wide• Pressure 2500 PSI max. • Pin holes 1˝• Rod dia. 1¼˝ • Shpg. 24 lbs.

2⅝˝ x 15˝ x 1½˝

ITEM 9-7025 $99.99SPECIFICATIONS • Retracted lgth. 24˝• New double acting • Rod pinhole 2¾˝ from body• Bore/stroke 2⅝˝ x 15˝ • Base pinhole 1¼˝ from body• 2500 PSI • Base extension 1½˝ diam• Rod diam. 1½˝ • Pin holes ¾˝• Ports SAE 6 • Shpg. 30 lbs.

2¾˝ x 6½˝ x 1⅜˝

ITEM 9-5208 $59.95SPECIFICATIONS• New, double acting • Ports ¼˝ NPT requires• Bore x stroke 2¾˝ x 6½˝ swivel or hose w/ flare• Pressure 2500 PSI max. • Tang ends 1¾˝ wide• Rod dia. 1⅜˝ • Pin holes 1⅜˝• Retracted lgth. 17¾˝ • Shpg. 30 lbs.

2¾˝ x 6¼˝ x 1¼˝

ITEM 9-4709 $49.99SPECIFICATIONS• New, double acting • Retracted lgth. 15˝• Bore x stroke 2¾˝ x 6¼˝ • Rod threaded• Pressure 2500 PSI max. 1⅛-12 x 1⅝˝ long• Rod dia. 1¼˝ • Base clevis 2¾˝ wide• Ports SAE 4 (retract), Pin hole 1⅛˝SAE 6 (extend) • Shpg. 23 lbs.

2¾˝ x 13¼˝ x 1⅜˝

ITEM 9-7827 $89.99SPECIFICATIONS • Retracted lgth. 20½˝• New double acting • Rod end crosstube 25/16˝ w.• Bore x Stroke 2¾˝ x 13¼˝ Pin hole 1⅜˝• Pressure 3000 PSI max. • Base end thru-hole 2⅝˝ w.• Rod dia. 1⅜˝ Pin hole 1¼˝• Ports SAE 6 • Shpg. 28 lbs.

2¾˝ x 20˝ x 1¼˝

ITEM 9-9186 $99.95• Nitro-Bar rod for improved corrosion re-sistance.SPECIFICATIONS • Ports SAE 6• New, double acting • Retracted lgth. 33⅜˝• Bore x Stroke 2¾˝ x 20˝ • Clevis ends 1¾˝ wide• Pressure 2500 PSI max. • Pin holes 1˝• Rod dia. 1¼˝ • Shpg. 30 lbs.

2¾˝ x 18¼˝ x 1¾˝

ITEM 9-8439 $89.99SPECIFICATIONS• New, double acting • Retracted lgth. 32⅛˝• Bore x Stroke 2¾˝ x 18¼˝ • Rod crosstube 3½˝ wide• Pressure 3000 PSI max. • Base thru-hole O.D. 2¾˝• Rod dia. 1¾˝ • Pin holes 1¼˝• Ports SAE 6 • Shpg. 43 lbs.

3˝ x 3¼˝ x 1½˝

ITEM 9-8297 $109.35• Unused, old inventory. Welded cylinderwith thread-in gland cap.SPECIFICATIONS • Ports SAE 6• Double acting • Retracted lgth. 13¼˝• Bore x Stroke 3˝ x 3¼˝ • Tang ends w/ swivel eye• Pressure 3000 PSI max. 115/16˝ thick• Rod dia. 1½˝ • Pin holes 1˝• Wall thickness 3/16˝ • Shpg. 23 lbs.

3˝ x 5⅝˝ x 1¼˝

ITEM 9-9509 $129.95• Unused, old inventory. Port block onbase end for rephasing on retraction.SPECIFICATIONS• Double acting rephasing • Retracted lgth. 15½˝• Bore x Stroke 3˝ x 5⅝˝ • Rod tang w/ swivel eye ⅞˝• Barrel thickness 3/16˝ Pin hole 1˝• Pressure 3000 PSI max. • Base clevis 115/16˝ wide• Rod dia. 1¼˝ Pin hole 11/16˝• Ports SAE 6 • Shpg. 19 lbs.

3˝ x 6˝ x 1½˝

ITEM 9-8484 $89.95SPECIFICATIONS• New • Ports SAE 6• Double acting • Retracted lgth. 19⅛˝• Bore x Stroke 3˝ x 6˝ • Tang ends with• Barrel thickness ¼˝ swivel eye 1½˝ thick• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1½˝ • Shpg. 30 lbs.

3˝ x 6˝ x 2˝

ITEM 9-9544 $119.95SPECIFICATIONS • Rod dia. 2˝• Unused, old inventory • Ports SAE 6• Double acting • Retracted lgth. 16˝• Bore x Stroke 3˝ x 6˝ • Tang ends 2˝ thick• Barrel thickness 5/16˝ • Pin holes 1˝• Pressure 3000 PSI max. • Shpg. 35 lbs.

3˝ x 8˝ x 1½˝

ITEM 9-9572 $149.95SPECIFICATIONS• Unused, old inventory • Retracted lgth. 31˝• Double acting • Rod thread-on tang w/• Bore x Stroke 3˝ x 8˝ swivel eye ⅞˝ thick• Barrel thickness 3/16˝ • Base tang w/ swivel eye• Pressure 3000 PSI max. ⅞˝ thick• Rod dia. 1½˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 39 lbs.

3˝ x 8˝ x 1˝

ITEM 9-9228 $59.95SPECIFICATIONS • Rod dia. 1˝• Unused, old inventory • Ports SAE 8• Double acting • Retracted lgth. 16½˝• Bore x Stroke 3˝ x 8˝ • Rod threaded 1˝-14 x 211/16˝• Barrel thickness 3/16˝ • Base tapped 1˝-8 x ⅞˝• Pressure 3000 PSI max. • Shpg. 16 lbs.

3˝ x 6⅛˝ x 1½˝

ITEM 9-2191 $76.50SPECIFICATIONS • Ports SAE 8• Double acting • Retracted lgth. 21¾˝• Bore/stroke 3˝ x 6⅛˝ • 1⅜˝ self aligning• 2500 PSI single eye both ends• Rod diam. 1½˝ • Shpg. 45 lbs.



Retracted Length


’’


3˝ x 16˝ x 1½˝

ITEM 9-9751 $131.95SPECIFICATIONS• Unused, old inventory • Ports SAE 6• Double acting • Retracted lgth. 28˝• Bore x Stroke 3˝ x 16˝ • Clevis ends• Pressure 3000 PSI max. rod 2¾˝ w., base 1⅞˝ w.• Barrel thickness ¼˝ • Pin holes 1˝• Rod dia. 1½˝ • Shpg. 44 lbs.

3˝ x 12˝ x 1½˝

ITEM 9-8662 $159.95SPECIFICATIONS • Ports SAE 10• New, PRINCE • Retracted lgth. 23½˝• Double acting • Rod clevis 41/32˝ wide• Bore x Stroke 3˝ x 12˝ Pin hole 1⅜˝• Barrel thickness 3/16˝ • Base crosstube 3¾˝ wide• Pressure 3000 PSI max. Pin hole 1˝• Rod dia. 1½˝ • Shpg. 38 lbs.

3˝ x 12˝ x 1⅜˝

ITEM 9-9387 $132.95SPECIFICATIONS• Unused, old inventory • Ports SAE 6• Double acting • Retracted lgth. 24¾˝• Bore x Stroke 3˝ x 12˝ • Clevis ends• Pressure 3000 PSI max. rod 2¾˝ w., base 211/16˝ w.• Rod dia. 1⅜˝ • Pin holes 1¼˝• Barrel thickness 3/16˝ • Shpg. 31 lbs.

3˝ x 11⅝˝ x 1⅜˝

ITEM 9-9464 $94.95SPECIFICATIONS • Rod dia. 1⅜˝• Unused, old inventory • Ports SAE 6• Double acting • Retracted lgth. 31¾˝• Bore x Stroke 3˝ x 11⅝˝ • Clevis ends 211/16˝ wide• Barrel thickness ¼˝ • Pin holes 1¼˝• Pressure 3000 PSI max. • Shpg. 47 lbs.

3˝ x 16˝ x 1⅜˝

ITEM 9-9284 $131.95SPECIFICATIONS• Unused, old inventory • Ports SAE 6• Double acting • Retracted lgth. 27⅛˝• Bore x Stroke 3˝ x 16˝ • Clevis ends• Pressure 3000 PSI max. rod 1¾˝ w., base 115/16˝ w.• Rod dia. 1⅜˝ • Pin holes 1˝• Barrel thickness 3/16˝ • Shpg. 31 lbs.

3˝ x 18˝ x 1½˝

ITEM 9-7593 $149.95SPECIFICATIONS • Barrel thickness ¼˝• Unused, old inventory • Ports SAE 8• Double acting • Retracted lgth. 28½˝• Bore x Stroke 3˝ x 18˝ • Crosstube ends 3¾˝ wide• Pressure 3000 PSI max. • Pin holes 1¼˝• Rod dia. 1½˝ • Shpg. 43 lbs.

3˝ x 24⅝˝ x 1¾˝

ITEM 9-8151 $139.95SPECIFICATIONS• Unused, old inventory • Ports SAE 14• Double acting • Retracted lgth. 35¾˝• Bore x Stroke 3˝ x 24⅝˝ • Rod crosstube 3½˝ wide• Barrel thickness ¼˝ • Base clevis 35/32˝ wide• Pressure 3000 PSI max. • Pin holes 2˝• Rod dia. 1¾˝ • Shpg. 63 lbs.

3˝ x 30¾˝ x 2˝

ITEM 9-9028 $269.95• Unused, old inventory. Counter-balancevalve with 1.5:1 pilot ratio, rated for 10GPM, set to 1690 PSI.SPECIFICATIONS• Double acting • Ports SAE 6• Bore x Stroke 3˝ x 30¾˝ • Retracted lgth. 43½˝• Pressure 3000 PSI max. • Crosstube ends 4⅛˝ wide• Rod dia. 2˝ • Pin holes 1¼˝• Barrel thickness 3/16˝ • Shpg. 82 lbs.

3˝ x 36˝ x 1½˝

ITEM 9-9153 $169.95Unused, old inventory. Both ports in rodend connection.SPECIFICATIONS• Double acting • Ports ¼˝ NPT• Bore x Stroke 3˝ x 36˝ • Retracted lgth. 49½˝• Barrel thickness ¼˝ • Thru-hole ends 23/16˝ wide• Pressure 3000 PSI max. • Pin holes 1⅛˝• Rod dia. 1½˝ hollow • Shpg. 61 lbs.

3˝ x 23˝ x 1½˝

ITEM 9-9247 $189.95• New. Ports face base end.SPECIFICATIONS• Double acting • Retracted lgth. 36˝• Bore x Stroke 3˝ x 23˝ • Rod crosstube 2¾˝ w.• Pressure 3000 PSI • Base tang 2˝ wide• Rod dia. 1½˝ • Pin holes 1¼˝• Ports SAE 8 • Shpg. 58 lbs.

3˝ x 19½˝ x 1½˝

ITEM 9-4789 $99.50SPECIFICATIONS • Ports SAE 12• New, double acting • Retracted lgth. 34˝• Bore x stroke 3˝ x 19½˝ • Clevis ends 3¾˝ w.• Pressure 2500 PSI max. • Pin holes 1¾˝• Rod dia. 1½˝ • Shpg. 78 lbs.

3˝ x 20˝ x 1¾˝

ITEM 9-7551 $139.95SPECIFICATIONS• New, double acting • Retracted lgth. 37½˝• Bore x stroke 3˝ x 20˝ • Crosstube rod 2½˝ w.• Pressure 3000 PSI max. • Tang base 1½˝ thick• Rod dia. 1¾˝ • Pin holes 1½˝• Ports SAE 8 • Shpg. 59 lbs.

3˝ x 36˝ x 2˝

ITEM 9-5749 $199.50• Built-in counterbalance valve.SPECIFICATIONS • Ports SAE 6• New, double acting • Retracted lgth. 50¼˝• Bore x stroke 3˝ x 36˝ • Clevis ends 2⅜˝ wide• Pressure 2500 PSI max. • Pin holes 1¼˝• Rod dia. 2˝ • Shpg. 115 lbs.

3˝ x 46˝ x 2½˝

ITEM 9-9014 $229.95• Transfer tube, both ports on block nearcenter of cylinder barrel. Counter-balancevalve with 3:1 pilot ratio rated for 5 GPM,400 to 1500 PSI functional setting rangew/ 25 PSI check.SPECIFICATIONS • Wall thickness 3/16˝• New, old inventory • Ports SAE 6• Double acting • Retracted lgth. 60˝• Bore x Stroke 3˝ x 46˝ • Crosstube ends 10⅝˝ wide• Pressure 3000 PSI max. • Pin holes 1½˝• Rod dia. 2½˝ • Shpg. 220 lbs.

Truck freight only.

3˝ x 46˝ x 2½˝

ITEM 9-9016 $229.95• Transfer tube, both ports on block nearcenter of cylinder barrel. Counter-balancevalve with 1.5:1 pilot ratio rated for 10GPM, 1000 to 4000 PSI functional settingrange w/ 25 PSI check.SPECIFICATIONS • Wall thickness 3/16˝• New, old inventory • Ports SAE 6• Double acting • Retracted lgth. 60⅛˝• Bore x Stroke 3˝ x 46˝ • Crosstube ends 10⅝˝ wide• Pressure 3000 PSI max. • Pin holes 1½˝• Rod dia. 2½˝ • Shpg. 220 lbs.

Truck freight only.

3˝ x 42˝ x 1½˝

ITEM 9-6780 $259.95SPECIFICATIONS• New double acting • Ret. port #8 O-ring face seal• Bore/stroke 3˝ x 42˝ • Retracted lgth. 55½˝• PSI 3000 max. • Crosstube ends• Rod diam. 1½˝ rod 2¾˝ w., base 3⅝˝ w.• Gland O.D. 4˝ • Pin hole 1⅜˝• Extension port SAE 10 • Shpg. 85 lbs.

3˝ x 16˝ x 1⅜˝

ITEM 9-8676 $79.95SPECIFICATIONS• New, double acting • Retracted lgth. 31½˝• Bore/Stroke 3˝ x 16˝ • Rod clevis 2½˝ wide• 2500 PSI max • Base clevis 2⅜˝ wide• Rod dia. 1⅜˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 42 lbs.


3¼˝ x 16˝ x 1¼˝

ITEM 9-10074 $119.95SPECIFICATIONS• New, double acting • Retracted lgth. 29⅛˝• Bore x Stroke 3¼˝ x 16˝ • Rod thread-on clevis 2¾˝ w.• Pressure 3000 PSI max. • Base end clevis 2¾˝ w.• Rod dia. 1¼˝ • Pin holes 1˝• Ports SAE 6 • Shpg. 37 lbs.

Fieldmate Cylinders• New, Fieldmate cylinder by EatonHydraulics. Super savings on doubleacting hydraulic tie-rod cylinders.Fully chromed piston rod. Ideal foragricultural and mobile applications.Both ends are clevis. All are 3000 PSI.

Rod Rod Width Base Width ITEM Model Bore/Stroke Diam. Ports R. Lgth. Outside Inside Outside Inside Pinholes Shpg. Price 9-6070-2508-AG Model 2508-FMA 2½˝ x 8˝ 1⅛˝ ⅜˝ NPT 20¼˝ 2⅝˝ 1⅛˝ 2⅝˝ 1⅛˝ 1˝ 24 lbs. $ 65.99 9-6070-3508-AG Model 3508-FMA 3½˝ x 8˝ 1¼˝ ½˝ NPT 20¼˝ 2⅝˝ 1⅛˝ 2¾˝ 1¼˝ 1˝ 32 lbs. $ 79.99 9-6070-3516-AG Model 3516-FMA 3½˝ x 16˝ 1½˝ ½˝ NPT 31½˝ 2⅝˝ 1⅛˝ 2¾˝ 1¼˝ 1¼˝ 53 lbs. $119.99

3˝ x 55⅛˝ x 1⅝˝

ITEM 9-8561 $299.99• New, FISHER HYDRAULICS double act-ing hydraulic cylinder.SPECIFICATIONS• Double acting • Retracted lgth. 64˝• Bore x Stroke 3˝ x 55.125˝ • Thru-hole ends• Pressure 2200 PSI max. rod 1⅝˝ w., base 3⅜˝ w.• Rod dia. 1⅝˝ • Pin holes 1˝• Port SAE 10 • Shpg. 88 lbs.

3˝ x 49¼˝ x 2½˝

ITEM 9-9034 $294.95• Transfer tube, both ports on block nearcenter of cylinder barrel. Counter-balancevalve with 1.5:1 pilot ratio rated for 10GPM, factory set to 2340 PSI, 1000 to4000 PSI functional setting range w/ 25PSI check.SPECIFICATIONS• New, old inventory • Ports SAE 6• Double acting • Retracted lgth. 63½˝• Bore x Stroke 3˝ x 49¼˝ • Crosstube ends• Pressure 3000 PSI max. rod 3⅛˝ w., base 4⅝˝ w.• Rod dia. 2½˝ • Pin holes 1¾˝• Wall thickness 3/16˝ • Shpg. 139 lbs.

3˝ x 46⅝˝ x 2˝

ITEM 9-10278 $229.95• Block at base end has the following ex-tend ports: SAE 4 with 0.035˝ orifice, SAE 6internal ball & spring check, SAE 6 with0.062˝ orifice and SAE 8.SPECIFICATIONS• Unused, old inventory • Ports SAE 8 extend,• Double acting SAE 6 retract, see above• Bore x Stroke 3˝ x 46⅝˝ • Retracted lgth. 56⅜˝• Pressure 3000 PSI max. • Crosstube ends 6⅜˝ wide• Rod dia. 2˝ • Pin holes 1½˝• Wall thickness ¼˝ • Shpg. 120 lbs.

3⅛˝ x 2½˝ x 1½˝

ITEM 9-8482 $59.95• Unused, old inventory. Retracted lengthmeasured from base end pin center to rodend.SPECIFICATIONS • Ports 3/8˝ NPT• Double acting • Retracted lgth. 20˝• Bore x Stroke 3⅛˝ x 2½˝ • Rod tapped ½-13 x 115/16˝• Barrel thickness 3/16˝ • Base crosstube 4˝ w.• Pressure 2500 PSI max. Pin hole ¾˝• Rod dia. 1½˝ • Shpg. 18 lbs.

3˝ x 192˝ x 2˝

ITEM 9-10391 $495.95• Unused, old inventory. Welded cylinderwith thread-on gland cap. Leaking sealsneed to be replaced, sold as is.SPECIFICATIONS• Double acting • Retracted lgth. 214¼˝• Bore x Stroke 3˝ x 192˝ • Rod sq. crosstube 2˝ x 2˝• Barrel thickness ¼˝ 5˝ wide• Pressure 3000 PSI max. • Base thru-hole 6˝ wide• Rod dia. 2˝ • Pin holes 1¼˝• Ports SAE 8 • Shpg. 450 lbs.

Flat bed truck freight only.

3¼˝ x 8˝ x 1⅛˝

ITEM 9-3225 $74.95SPECIFICATIONS• Unused old inventory • Ports ½˝ NPT• Double acting • Retracted lgth. 20⅜˝• Bore x Stroke 3¼˝ x 8˝ • Clevis ends 2¾˝ wide• Pressure 2500 PSI max. • Pin holes 1˝• Rod dia. 1⅛˝ • Shpg. 26 lbs.

3¼˝ x 13˝ x 1˝

ITEM 9-9737 $102.95• Mounting blocks on each end of cylinderwith two 0.450˝ dia. holes on 2¾˝ centers.Mounting blocks measure 3¾˝ long, 1¼˝wide, and 1˝ thick at bolt holes.SPECIFICATIONS • Wall thickness ⅛˝• New, old inventory • Ports ½˝ NPT• Double acting • Retracted lgth. 20⅜˝• Bore x Stroke 3¼˝ x 13˝ • Rod end tapped ¾-16 x 17/16˝• Pressure 2500 PSI max. • Base end blank• Rod dia. 1˝ • Shpg. 29 lbs.

3¼˝ x 5⅝˝ x 1¼˝

ITEM 9-5858 $54.99SPECIFICATIONS• New double acting rephasing• Retracted lgth. 15½˝• Bore/stroke 3¼˝ x 5⅝˝ • Rod 1˝ diam. swivel• 2500 PSI • Clevis base 1⅛˝ wide• Rod diam. 1¼˝ pin 1˝• Ports SAE 6 • Shpg. 28 lbs.

3¼˝ x 7½˝ x 1½˝

ITEM 9-9505 $89.95• Two retract ports, one faces rod end, onefaces base end.SPECIFICATIONS• New, double acting • Retracted lgth. 21⅞˝• Bore x Stroke 3¼˝ x 7½˝ • Tang ends w/swivel eye• Pressure 3000 PSI max. rod 2˝ w., base 2¾˝ w.• Rod dia. 1½˝ • Pin holes 1½˝• Ports SAE 8 • Shpg. 58 lbs.

3¼˝ x 15˝ x 1½˝

ITEM 9-9181 $129.95SPECIFICATIONS• New, double acting • Retracted lgth. 30.75˝• Bore x Stroke 3¼˝ x 15˝ • Rod tang w/swivel-eye ⅞ ̋w.• Pressure 2500 PSI max. • Base end clevis 215/16˝ w.• Rod dia. 1½˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 35 lbs.

3¼˝ x 16˝ x 1½˝

ITEM 9-9564 $169.95• Unused, old inventory. Port block on rodend of barrel with two SUN counterbalancevalves with 3:1 pilot ratio.SPECIFICATIONS• Double acting • Retracted lgth. 29¼˝• Bore x Stroke 3¼˝ x 16˝ • Rod end thread-on clevis• Pressure 3000 PSI max. assembly 2¾˝ wide• Rod dia. 1¼˝ • Base end clevis 211/16˝ w.• Wall thickness 3/16˝ • Pin holes 1˝• Ports SAE 6 • Shpg. 43 lbs.


3½˝ x 2˝ x 1⅜˝

ITEM 9-9656$89.95

• Two mounting holes in gland end-captapped 5/16-18 on 2¾˝ B.C.SPECIFICATIONS• New, S-P MFG. Corp. • Rod end threaded• Double acting ⅞-14 x 1⅞˝ long• Bore x Stroke 3½˝ x 2˝ • Base end round plate• Pressure 2000 PSI max. O.D. 6¼˝• Rod dia. 1⅜˝ Mtg. holes three ⅜˝• Ports ¼˝ NPT on 5½˝ B.C.• Retracted lgth. 9⅛˝ • Shpg. 30 lbs.

3½˝ x 2˝ x 1⅜˝

ITEM 9-9299$89.95

• Unused, old inventory. Hanna Cylinders.6¼˝ diameter mounting flange on base endhas three ⅜˝ mounting holes.SPECIFICATIONS• Double acting • Retracted lgth. 9⅛˝• Bore x Stroke 3½˝ x 2˝ • Rod threaded ⅞-14 x 1½˝• Barrel thickness ⅛˝ • Base end plate O.D. 6¼˝• Pressure 2500 PSI max. mounting holes ⅜˝• Rod dia. 1⅜˝ on 5½˝ B.C.• Ports ¼˝ NPT • Shpg. 28 lbs.

3½˝ x 15˝ x 1½˝

ITEM 9-5733-A $109.95SPECIFICATIONS • Rod diam. 1½˝• New double acting • Retracted lgth. 26¾˝• Bore/stroke 3½˝ x 15˝ • Single eye rod• 2500 PSI pin hole 213/16˝• Ports 2 bolt manifold • Crosstube base 415/16˝ w.with ⅛˝ auxiliary ports pin holes 1¾˝(manifold not available) • Shpg. 51 lbs.

3½˝ x 20˝ x 2˝

ITEM 9-9520 $159.95• Unused, old inventory. Port block locatedat base end of barrel.SPECIFICATIONS • Ports SAE 8• Double acting • Retracted lgth. 53¼˝• Bore x Stroke 3½˝ x 20˝ • Rod thread-on tang 2˝-12• Barrel thickness ¼˝ tang thickness 2½˝• Pressure 3000 PSI max. • Base tang 1½˝ thick• Rod dia. 2˝ • Shpg. 105 lbs.

3½˝ x 19½˝ x 1½˝

ITEM 9-5589 $119.50• New, double acting trunnion mount hy-draulic cylinder. Built-in integral lock valveon extension.SPECIFICATIONS• Double acting • Rod crosstube 6˝ wide• Bore x stroke 3½˝ x 19½˝ Pin hole 1¼˝• Pressure 2500 PSI max. • Base end female trunnion• Rod dia. 1½˝ trunnion width 6˝• Ports SAE 6 trunnion pin hole 1¼˝• Retracted lgth. 24˝ • Shpg. 65 lbs.

3½˝ x 19˝ x 1¾˝

ITEM 9-7583 $159.99SPECIFICATIONS• New double acting • Retracted lgth. 33⅝˝• Bore x Stroke 3½˝ x 19˝ • Rod crosstube 4⅛˝ w.• Pressure 3000 PSI max. • Base swivel 1¾˝ w.• Rod dia. 1¾˝ • Pin holes 1¾˝• Ports SAE 8 • Shpg. 93 lbs.

3½˝ x 17⅞˝ x 2˝

ITEM 9-9763 $193.95SPECIFICATIONS• Unused, old inventory • Ports SAE 6• Double acting • Retracted lgth. 30˝• Bore x Stroke 3½˝ x 17⅞˝ • Rod clevis 29/16˝ w.• Barrel thickness ¼˝ • Base crosstube 4⅜˝ w.• Pressure 3000 PSI max. • Pin holes 1¼˝• Rod dia. 2˝ • Shpg. 61 lbs.

3½˝ x 10˝ x 1¼˝

ITEM 9-8415 $79.99SPECIFICATIONS • Pressure 2500 PSI max• New, CROSS • Ports SAE 8• Double acting • Rod crosstube 2¾˝ wide• Bore x Stroke 3½˝ x 10˝ • Base clevis 2¾˝ wide• Rod dia. 1¼˝ • Pin holes 1¼˝• Retracted lgth. 19˝ • Shpg. 32 lbs.

3¼˝ x 31˝ x 2˝

ITEM 9-9523 $269.95• New. Both ports at base end of cylinder.Extend port has removable restrictor with0.075˝ dia. orifice.SPECIFICATIONS • Ports SAE 6• Double acting • Retracted lgth. 41¼˝• Bore x Stroke 3¼˝ x 31˝ • Clevis ends• Barrel thickness ¼˝ rod 2⅝˝ w., base 2½˝• Pressure 3000 PSI max. • Pin holes 1⅛˝• Rod dia. 2˝ • Shpg. 74 lbs.

3½˝ x 4˝ x 1¼˝

ITEM 9-7621-04 $98.95SPECIFICATIONS• Brand new RED LION • PSI 2500 max.• Model 35TL04-125 • Ports ½˝ NPT• Double acting • Clevis ends• Bore x stroke 3½˝ x 4˝ rod 2⅝˝ w., base 29/16˝ w.• Rod dia. 1¼˝ • Pin holes 1˝• Retracted lgth. 14¼˝ • Shpg. 33 lbs.

3½˝ x 16˝ x 1½˝

ITEM 9-9294 $179.95SPECIFICATIONS• Unused, old inventory • Extend port ½˝ NPT• Double acting • Retract port ⅜˝ NPT• Bore x Stroke 3½˝ x 16˝ • Retracted lgth. 24½˝• Barrel thickness ¼˝ • Tang ends w/ swivel eye 1˝• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1½˝ • Shpg. 40 lbs.

3¼˝ x 24˝ x 1¾˝DA Hyd. Cylinder w/ Mounts

ITEM 9-10071 $189.95• Cushions at both ends of stroke. Shipswith two steel foot mounts, pins and clips.SPECIFICATIONS• New VICKERS • Rod dia. 1¾˝• Double acting • Ports ¾˝ NPT• Bore x Stroke 3¼˝ x 24˝ • Retracted lgth. 37¾˝• Pressure 3000 PSI max. • Shpg. 130 lbs.• Rod thread-on clevis 41/32 ̋w. • Base end clevis 3˝ widePin hole 1⅜˝ Pin hole 1˝Foot mount bolt holes Foot mount bolt holesfour 0.65˝ on 313/16˝ sq. ctrs. four 0.65˝ on 3¼˝ sq. ctrs.

3½˝ x 12˝ x 1½˝

ITEM 9-9526 $126.95SPECIFICATIONS• New, double acting • Ports SAE 8• Bore x Stroke 3½˝ x 12˝ • Retracted lgth. 22¼˝• Barrel thickness 3/16˝ • Clevis ends 211/16˝ wide• Pressure 2500 PSI max. • Pin holes 1˝• Rod dia. 1½˝ • Shpg. 41 lbs.

3½˝ x 14¼˝ x 1.77˝

ITEM 9-10302 $179.95SPECIFICATIONS • Rod dia. 45mm (1.77˝)• Unused, old inventory • Ports ½˝ BSPP Male• Double acting • Retracted lgth. 28˝• Bore x Stroke 3½˝ x 14¼˝ • Tang ends 2˝ thick• Barrel thickness 5/16˝ • Pin holes 45mm (1.77˝)• Pressure 3000 PSI max. • Shpg. 63 lbs.


3½˝ x 21˝ x 2½˝

ITEM 9-8642 $189.95SPECIFICATIONS • Ports SAE 16• New, PRINCE • Retracted lgth. 34˝• Double acting • Rod thru-hole 2¼˝• Bore x Stroke 3½˝ x 21˝ • Base tang 3˝ thick• Barrel thickness ⅜˝ • Pin holes• Pressure 3000 PSI max. rod 1¼˝, base 1½˝• Rod dia. 2½˝ • Shpg. 103 lbs.

3½˝ x 20¾˝ x 1½˝

ITEM 9-8063 $179.95SPECIFICATIONS• New, old inventory • Ports SAE 10• Double acting • Retracted lgth. 30˝• Bore x Stroke 3½˝ x 20¾˝ • Rod crosstube 2¼˝ wide• Pressure 2500 PSI max. • Base tang 2.275˝ wide• Rod dia. 1½˝ • Pin holes 1½˝• Wall thickness 3/16˝ • Shpg. 50 lbs.

3½˝ x 20⅞˝ x 1¾˝

ITEM 9-9087 $159.95• New. Welded cylinder with thread-ingland cap. Transfer tube to cartridge blockwith dimensions 5⅜˝ x 4˝ x 2˝ at base endof cylinder. Block features one SUN ModelCBBG-LJN restrictive counterbalancevalve with 4.5:1 pilot ratio and 5 GPM ca-pacity, factory set to 2100 PSI, and oneHydraForce Model SV08-20S 2-way, pop-pet-type, normally-closed, 6 VDC solenoidvalve rated for 6 GPM and 3000 PSI withan integral 150-micron screen. Cylinderhas two SAE 6 work ports (“P1” and “P2”)with SAE 6 male to JIC 6 male adaptersand one SAE 4 drain port (“T”) with a SAE4 male to JIC 4 male 90° swivel adapter.When energized, the solenoid valve opens,draining the “extend” side of the cylinderthrough the “T” port. This cylinder can beoperated as a typical double-acting cylin-der using the “P1” and “P2” work ports.The solenoid valve and “T” port do notneed to be used.SPECIFICATIONS • Drain port SAE 4• Double acting (see paragraph)• Bore x Stroke 3½˝ x 20⅞˝ • Retracted lgth. 34⅜˝• Barrel thickness ¼˝ • Tang ends w/ swivel eye• Pressure 3000 PSI max. 1˝ thick• Rod dia. 1¾˝ • Pin holes 1˝• Work ports SAE 6 • Shpg. 59 lbs.

3½˝ x 30˝ x 2˝Hyd Cyl w/ Flange Mount

ITEM 9-10078 $259.95SPECIFICATIONS• New, double acting • Rod end two thru-holes• Bore x Stroke 3½˝ x 30˝ Pin hole 1: dia. 1˝• Pressure 3000 PSI max. Pin hole 2: dia. ½˝• Rod dia. 2˝ • Base flange• Ports ⅜˝ NPT 7½˝ sq. x ¾˝ thick• Overall lgth. 39˝ overall 4 holes ½˝ dia. on• Shpg. 95 lbs. 5.75˝ sq. ctrs.

3½˝ x 28˝ x 1¾˝

ITEM 9-5612 $149.99SPECIFICATIONS• New double acting • Retracted lgth. 39¾˝• Bore/stroke 3½˝ x 28˝ • Tang rod w/swivel eye• 2500 PSI • Tang base 1˝ x 3½˝• Rod diam. 1¾˝ • Pin holes 1¼˝• Ports ½˝ NPT • Shpg. 73 lbs.

3½˝ x 30˝ x 2˝

ITEM 9-9187 $249.95• Two thru-holes in rod 2˝ apart on center.SPECIFICATIONS • Retracted lgth. 38⅜˝• New, double acting • Rod end thru-hole• Bore x Stroke 3½˝ x 30˝ Pin hole 1˝ & ½˝• Pressure 3000 PSI max. • Base crosstube 413/16˝ w.• Rod dia. 2˝ Pin hole 1˝• Ports ⅜˝ NPT • Shpg. 83 lbs.

3½˝ x 35˝ x 2˝

ITEM 9-9697 $249.95• Unused, old inventory. Counterbalancevalve with 3:1 pilot ratio, rated for 5 GPM.SPECIFICATIONS • Ports SAE 6• Double acting • Retracted lgth. 503/16˝• Bore x Stroke 3½˝ x 35˝ • Crosstube ends• Barrel thickness ¼˝ rod 2½˝ w., base 4½˝ w.• Pressure 3000 PSI max. • Pin holes 1½˝• Rod dia. 2˝ • Shpg. 102 lbs.

3⅝˝ x 20½˝ x 1½˝

ITEM 9-5733 $129.99SPECIFICATIONS • Retracted lgth. 33½˝• New, double acting • Rod tang w/swivel eye• Bore x stroke 3⅝˝ x 20½˝ 1½˝ w.• Pressure 2500 PSI max. • Base crosstube 413/16˝ w.• Rod dia. 1½˝ • Pin holes 1¾˝• Ports ¼˝ NPT • Shpg. 59 lbs.

3½˝ x 49¼˝ x 2½˝

ITEM 9-9078 $299.95• Counter-balance valve with 1.5:1 pilotratio rated for 10 GPM, 1000 to 4000 PSIfunctional setting range w/ 25 PSI check.SPECIFICATIONS • Wall thickness ¼˝• New, old inventory • Ports SAE 6• Double acting • Retracted lgth. 63½˝• Bore x Stroke 3½˝ x 49¼˝ • Crosstube ends 1111/16˝ wide• Pressure 3000 PSI max. • Pin holes 1½˝• Rod dia. 2½˝ • Shpg. 250 lbs.

Truck freight only.

3½˝ x 46˝ x 2½˝

ITEM 9-10227 $299.95• Counter-balance valve with 3:1 pilot ratiorated for 5 GPM, 400 to 1500 PSI func-tional setting range w/ 25 PSI check.SPECIFICATIONS • Rod dia. 2½˝• New, old inventory • Ports SAE 6• Double acting • Retracted lgth. 60˝• Bore x Stroke 3½˝ x 46˝ • Crosstube ends 11⅝˝ wide• Barrel thickness ¼˝ • Pin holes 1½˝• Pressure 3000 PSI max. • Shpg. 240 lbs.

Truck freight only.

3½˝ x 42˝ x 2˝

ITEM 9-9022 $299.99• Unused, old inventory. Counterbalancevalves with 3:1 pilot ratio and 10 GPM ca-pacity, factory set to 3500 PSI.SPECIFICATIONS• Double acting • Ports SAE 6• Bore x Stroke 3½˝ x 42˝ • Retracted lgth. 54¾˝• Barrel thickness ¼˝ • Tang ends 19/16˝ thick• Pressure 3000 PSI max. • Pin holes 1¾˝• Rod dia. 2˝ • Shpg. 108 lbs.

3½˝ x 45¾˝ x 2½˝

ITEM 9-9079 $299.95• Unused, old inventory. Manifold blockhas one semi-restrictive counterbalancevalve with 1.5:1 pilot ratio and 10 GPM ca-pacity, factory set to 1820 PSI.SPECIFICATIONS• Double acting • Ports SAE 6• Bore x Stroke 3½˝ x 45¾˝ • Retracted lgth. 60˝• Barrel thickness ¼˝ • Crosstube ends 10⅝˝ wide• Pressure 3000 PSI max. • Pin holes 1½˝• Rod dia. 2½˝ • Shpg. 260 lbs.

Truck freight only.

3.925˝ x 27.375˝ x 2.357˝ (100mm x 695mm x 60mm)

ITEM 9-8317 $249.95• New. Features metric 6-bolt flange with13mm ports on 40mm centers.SPECIFICATIONS • Ports 6-bolt metric flange• Double acting • Retracted lgth. 38½˝• Bore x Stroke • Tang ends with swivel eye100mm x 695mm rod 43mm (1.689˝) thick(3.925˝ x 27.375˝) base 35mm (1.375˝) thick

• Barrel thickness • Pin holes8.5mm (0.350˝) rod 45mm (1.762˝)

• Pressure 3000 PSI max. base 50mm (1.958˝)• Rod dia. 60mm (2.357˝) • Shpg. 114 lbs.

3¾˝ x 33¾˝ x 2.560˝

ITEM 9-9983 $289.95SPECIFICATIONS• Unused, old inventory • Ports ORFS 12M• Double acting • Retracted lgth. 51⅜˝• Bore x Stroke 3¾˝ x 33¾˝ • Tang ends• Barrel thickness 11/32˝ rod 3⅛˝ w., base 3½˝ w.• Pressure 3000 PSI max. • Pin holes 65mm (2.560˝)• Rod dia. 65mm (2.560˝) • Shpg. 270 lbs.

Truck freight only.


4˝ x 20˝ x 2˝

ITEM 9-8750 $239.99• New, welded cylinder with thread-ingland cap. JIC 6M ports offset 90°, bothface base end of cylinder.SPECIFICATIONS• Double acting • Retracted lgth. 29¾˝• Bore x Stroke 4˝ x 20˝ • Rod crosstube 9¼˝ w.• Barrel thickness ¼˝ • Base tang 2½˝ thick• Pressure 3000 PSI max. • Pin holes• Rod dia. 2˝ rod 1¾˝, base 1˝• Ports JIC 6 male • Shpg. 68 lbs.

4˝ x 24˝ x 2˝

ITEM 9-8159 $239.95SPECIFICATIONS• Unused, old inventory • Ports ½˝ NPT• Double acting • Retracted lgth. 43½˝• Bore x Stroke 4˝ x 24˝ • Rod crosstube 3˝ wide• Pressure 3000 PSI max. • Base tang 1½˝ wide• Rod dia. 2˝ • Pin holes 1½˝• Barrel thickness ¼˝ • Shpg. 88 lbs.

4˝ x 24˝ x 2˝Log Splitter Cylinder

ITEM 9-6890 $259.55SPECIFICATIONS• Brand new double acting • Retracted lgth. 3215/16˝• Bore/stroke 4˝ x 24˝ • Rod thru-hole• 3000 PSI max. • Base tang 1½˝ w.• Rod diam. 2˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 71 lbs.

4˝ x 10¼˝ x 2˝

ITEM 9-9145 $194.95SPECIFICATIONS• Unused, double acting • Retracted lgth. 25˝• Bore x Stroke 4˝ x 10¼˝ • Rod tang w/swivel eye• Barrel thickness ¼˝ width 115/16˝ max.• PSI 3000 max. • Clevis base 3½˝ wide• Rod dia. 2˝ • Pin holes 1½˝• Ports SAE 8 • Shpg. 54 lbs.

4˝ x 16˝ x 1¾˝

ITEM 9-8540 $99.99• New, LION Model 40TD16-175.SPECIFICATIONS• Double acting tie rod • Clevis ends• Bore x Stroke 4˝ x 16˝ rod 2.94˝ wide,• Pressure 3000 PSI max. base 2.63˝ wide• Rod dia. 1¾˝ • Throat depth 2⅛˝• Ports SAE 8 • Pin holes 1¼˝• Retracted lgth. 31½˝ • Shpg. 60 lbs.

4˝ x 26˝ x 2½˝

ITEM 9-10000 $309.95SPECIFICATIONS• New GALBREATH • Flange mount 4 hole 5˝ ctrs.• Double acting • Retracted lgth. 35⅝˝• Bore x Stroke 4˝ x 26˝ • Rod end thru-hole 2½˝ w.• Pressure 3000 PSI max. Pin Hole 1˝• Rod dia. 2½˝ • Base end flat O.D. 4⅝˝• Ports ½˝ NPT • Shpg. 114 lbs.

4˝ x 10˝ x 1½˝

ITEM 9-8638 $139.95SPECIFICATIONS • Port SAE 8• New, double acting • Retracted lgth. 20˝• Bore x Stroke 4˝ x 10˝ • Rod thru-hole 1½˝ wide• Barrel thickness 3/16˝ • Base tang 2˝ thick• Pressure 2500 PSI max. • Pin holes 1˝• Rod dia. 1½˝ • Shpg. 37 lbs.

4˝ x 18˝ x 2˝

ITEM 9-10958 $194.95• Unused, old inventory. Both ports in rod end.SPECIFICATIONS • Ports ¼˝ NPT• Double acting • Retracted lgth. 29⅝˝• Bore x Stroke 4˝ x 18˝ • Thru-hole ends• Barrel thickness 5/16˝ rod 2⅞˝ w., base 2˝ w.• Pressure 3000 PSI max. • Pin holes• Rod dia. 2˝, hollow rod 1⅛˝, base 1¼˝• Rod thickness 7/16˝ • Shpg. 67 lbs.

4˝ x 14˝ x 1½˝

ITEM 9-8644 $119.95SPECIFICATIONS • Rod crosstube 1¾˝ wide• New PRINCE Pin hole 1˝• Double acting • Male trunnion• Bore x Stroke 4˝ x 14˝ trunnion pin width• Barrel thickness 7/32˝ outside 7¾˝, inside 5¾˝• Pressure 2500 PSI max. pin ctr to rod pin ctr 22¾˝• Rod dia. 1½˝ pin ctr to base end 23⅜˝• Ports ½˝ NPT trunnion pin 1¼˝ dia. x 1˝• Retracted lgth. 1311/16˝ • Shpg. 48 lbs.

4˝ x 32˝ x 2˝

ITEM 9-7921 $249.99• Unused, old inventory. Removablebreather in retract port.SPECIFICATIONS• Double acting • Ports SAE 8• Bore x Stroke 4˝ x 32˝ • Retracted lgth. 41˝• Barrel thickness ¼˝ • Crosstube ends 5¼˝ wide• Pressure 3000 PSI max. • Pin holes 1¼˝• Rod dia. 2˝ • Shpg. 87 lbs.

4˝ x 26˝ x 2¼˝

ITEM 9-8751 $249.99• New, welded cylinder with thread-ingland cap. Transfer tube to retract port.Work ports offset 180°.SPECIFICATIONS • Ports SAE 10• Double acting • Retracted lgth. 36½˝• Bore x Stroke 4˝ x 26˝ • Tang ends with swivel• Barrel thickness ¼˝ eye 1¼˝ thick• Pressure 3000 PSI max. • Pin holes 1½˝• Rod dia. 2¼˝ • Shpg. 88 lbs.

4˝ x 28˝ x 2¼˝

ITEM 9-8752 $249.99• New, welded cylinder with thread-ingland cap. Work ports offset 180° fromeach other and inline with pins.SPECIFICATIONS • Ports SAE 8, see paragraph• Double acting • Retracted lgth. 39˝• Bore x Stroke 4˝ x 28˝ • Crosstube ends• Barrel thickness 5/16˝ rod 4˝ w., base 4¾˝ w.• Pressure 4000 PSI max. • Pin holes 1¼˝• Rod dia. 2¼˝ • Shpg. 102 lbs.

4˝ x 9½˝ x 2˝

ITEM 9-9220 $199.95• Unused, old inventory. Counter-balancevalve with 4.5:1 pilot ratio, rated for 15GPM, set to 3900 PSI, standard screw ad-justment.SPECIFICATIONS • Ports SAE 6• Double acting • Retracted lgth. 21¼˝• Bore x Stroke 4˝ x 9½˝ • Tang w/ swivel eye ends• Barrel thickness 5/16˝ 11/16˝ thick• Pressure 3000 PSI max. • Pin holes 1¼˝• Rod dia. 2˝ • Shpg. 64 lbs.

4˝ x 6¼˝ x 2˝

ITEM 9-9999 $144.95SPECIFICATIONS • Rod dia. 2˝• Unused, old inventory • Ports SAE 6• Double acting • Retracted lgth. 25½˝• Bore x Stroke 4˝ x 6¼˝ • Tang ends 2¼˝ thick• Barrel thickness 5/16˝ • Pin holes 111/16˝• Pressure 3000 PSI max. • Shpg. 58 lbs.

4˝ x 18˝ x 2˝

ITEM 9-8753 $149.95• New, welded cylinder with thread-ongland cap.SPECIFICATIONS • Ports SAE 8• Double acting • Retracted lgth. 3111/16˝• Bore x Stroke 4˝ x 18˝ • Clevis ends• Barrel thickness ¼˝ rod 3⅝˝ w., base 2⅝˝ w.• Pressure 3000 PSI max. • Pin holes 25 mm• Rod dia. 2˝ • Shpg. 70 lbs.


4˝ x 45⅜˝ x 2˝

ITEM 9-7855 $399.99• Unused, old inventory. Superficial rust.SPECIFICATIONS • Ports SAE 12• Double acting • Retracted lgth. 57½˝• Bore x Stroke 4˝ x 45⅜˝ • Rod crosstube 35/16˝ w.• Barrel thickness ¼˝ • Base clevis 215/16˝ w.• Pressure 3000 PSI max. • Pin holes 1½˝• Rod dia. 2˝ • Shpg. 128 lbs.

4˝ x 45⅜˝ x 2˝

ITEM 9-7575 $399.95SPECIFICATIONS• New, double acting • Retracted lgth. 57¼˝• Bore x stroke 4˝ x 45⅜˝ • Rod crosstube 35/16˝ wide• Pressure 3000 PSI max. • Base clevis 215/16˝ wide• Rod dia. 2˝ • Pin holes 1½˝• Ports SAE 12 • Shpg. 135 lbs.

4˝ x 52¾˝ x 3˝

ITEM 9-8156 $439.95• Transfer tube, both ports on base end ofcylinder barrel.SPECIFICATIONS• New, old inventory • Ports SAE 16• Double acting • Retracted lgth. 68˝• Bore x Stroke 4˝ x 52¾˝ • Crosstube ends• Pressure 3000 PSI max. rod 5˝ w., base 6⅛˝ w.• Rod dia. 3˝ • Pin holes 1˝• Wall thickness 5/16˝ • Shpg. 300 lbs.

Truck freight only.

4˝ x 45˝ x 2˝

ITEM 9-7810 $349.95SPECIFICATIONS • Retracted lgth. 63˝• New, double acting • Rod tang w/ swivel ball• Bore x stroke 4˝ x 45˝ O.D. 49/16˝• Pressure 3000 PSI max. • Base tang 4˝ wide• Rod dia. 2˝ • Pin holes 2˝• Ports SAE 16/12 Ext/Ret • Shpg. 214 lbs.

Truck freight only.

4½˝ x 14˝ x 1¾˝

ITEM 9-7585 $299.95SPECIFICATIONS• New, double acting • Retracted lgth. 30¼˝• Bore x stroke 4½˝ x 14˝ • Crosstube ends• Pressure 3000 PSI max. rod 2¼˝ w., base 5¼˝ w.• Rod dia. 1¾˝ • Pin holes 1½˝• Ports SAE 8 • Shpg. 69 lbs.

4¼˝ x 29⅜˝ x 2½˝

ITEM 9-8640 $349.95• New, PRINCE. Port block has two SUNModel CBCX-LHN counterbalance valveswith 3:1 pilot ratio, rated for 15 GPM, setat 3000 PSI. Port block also has two SUNmodel RBAG-XAN thermal relief valves,factory-set to 3000 PSI. Prince RoyalplatePlus rod. Work ports are located oppositecounterbalance valves.SPECIFICATIONS• Double acting • Rod crosstube• Bore x Stroke 4¼˝ x 29⅜˝ 70mm (2.756˝) w.• Barrel thickness ¼˝ • Base tang• Pressure 3000 PSI max. 85mm (3.346˝) w.• Rod dia. 2½˝ • Pin holes• Ports SAE 6 rod 40mm, base 50mm• Retracted lgth. 47¼˝ • Shpg. 200 lbs.

Truck freight only.

4½˝ x 19˝ x 2½˝

ITEM 9-9086 $329.95SPECIFICATIONS• Unused , old inventory • Ports ¼˝ NPT• Double acting • Retracted lgth. 31½˝• Bore x Stroke 4½˝ x 19˝ • Tang ends with swivel• Barrel thickness ¼˝ eye 13/32˝ wide• Pressure 3000 PSI max. • Pin holes 1¼˝• Rod dia. 2½˝ • Shpg. 85 lbs.

4½˝ x 24˝ x 1¾˝Log Splitter Cylinder

ITEM 9-7849 $259.55• Brand new, FISHER HYDRAULICS trun-nion (gimble) mount cylinder used on manypopular brands of log splitters. Rated 3500PSI to provide up to 27 tons of force. Idealcylinder for replacement use or for buildingheavy duty log splitters.SPECIFICATIONS• Double acting • Rod thru-hole 1½˝ wide• Bore x Stroke 4½˝ x 24˝ Pin hole 9/16˝• Pressure 3500 PSI max. • Base end trunnion• Rod dia. 1¾˝ Trunnion pin width• Push port JIC 8 M outside 8⅞˝, inside 531/32˝• Retract port ½˝ NPT Trunnion pin diam. 1½˝• Retracted lgth. 3⅛˝ Trunnion pin lgth. 17/16˝• Overall retracted lgth. 29⅝˝ • Shpg. 63 lbs.

4½˝ x 32˝ x 2˝

ITEM 9-7516 $449.95SPECIFICATIONS • Ports SAE 16• New double acting • Retracted lgth. 54½˝• Bore x stroke 4½˝ x 32˝ • Tang ends 2¾˝ wide• Pressure 3000 PSI max. • Pin holes 2˝• Rod dia. 2˝ • Shpg. 145 lbs.

4½˝ x 51⅞˝ x 2½˝

ITEM 9-10172 $589.95• Transfer tube, both ports on block nearbase end of cylinder barrel. Counter-balancevalve with 1.5:1 pilot ratio rated for 10 GPM,factory set to 3500 PSI, 1000 to 4000 PSIfunctional setting range w/ 25 PSI check.SPECIFICATIONS• New, old inventory • Ports SAE 6• Double acting • Retracted lgth. 68˝• Bore x Stroke 4½˝ x 51⅞˝ • Crosstube ends• Pressure 3000 PSI max. rod 6⅞˝ w., base 6˝ w.• Rod dia. 2½˝ • Pin holes 2˝• Wall thickness ⅜˝ • Shpg. 300 lbs.

Truck freight only.

4.535˝ x 35.5˝ x 2.554˝(115 mm x 900 mm x 65 mm)

ITEM 9-9842 $349.95• Unused, old inventory. Welded cylinderwith thread-in gland retainer. Four boltflange ports have 26 mm inside diameterport, four mounting holes on 32 mm x 37mm centers tapped M8-1.25.SPECIFICATIONS• Double acting • Ports four bolt flanges,• Bore x Stroke 4.535˝ x 35.5˝ see above(115 mm x 900 mm) • Tang ends

• Barrel thickness 0.455˝ 2.76˝ (70 mm) wide• Pressure 3000 PSI max. • Pin center to tang end 1⅞˝• Rod dia. 2.554˝ (65 mm) • Pin holes 1.895˝ (48 mm)• Retracted lgth. 49˝ • Shpg. 220 lbs.

Truck freight only.

4½˝ x 26˝ x 2˝

ITEM 9-9889 $389.95• Steel foot mount welded to barrel atgland end measures 8¼˝ long, 2½˝ wide, 1˝thick with two 15/16˝ holes on 6¾˝ centers.SPECIFICATIONS • Rod end clevis 4½˝ wide• Unused, old inventory • Base end block with• Double acting two bolt holes• Bore x Stroke 4½˝ x 26˝ Block width 4½˝• Pressure 3000 PSI max. Block thickness 2˝• Rod dia. 2˝ Hole spacing 3˝ centers• Wall thickness ¼˝ • Pin holes• Ports SAE 8 rod 1½˝, base 15/16˝• Retracted lgth. 40˝ • Shpg. 99 lbs.

4½˝ x 21¼˝ x 2½˝

ITEM 9-9015 $369.95• Unused, old inventory. Two extend portflanges at base end.SPECIFICATIONS• Double acting • Rod dia. 2½˝• Bore x Stroke 4½˝ x 21¼˝ • Retracted lgth. 38˝• Barrel thickness 5/16˝ • Tang ends with swivel eye• Pressure 3000 PSI max. 215/16˝ thick• Ports 4 bolt flange code 61• Pin holes 2¼˝extend 1˝, retract ¾˝ • Shpg. 220 lbs.

Truck freight only.

Retracted Length


’’

You can find cylinderdefinitions on page 52


5˝ x 4˝ x 1½˝

ITEM 9-9208$189.95

• New. Additional ½˝ NPT extend port inbase end of cylinder.SPECIFICATIONS• Double acting • Retracted lgth. 16¼˝• Bore x Stroke 5˝ x 4˝ • Clevis ends• Barrel thickness ¼˝ rod 211/16˝ w.,• Pressure 2500 PSI max. base 3½˝ w.• Rod dia. 1½˝ • Pin holes 1˝• Ports ½˝ NPT • Shpg. 60 lbs.

5˝ x 12˝ x 2.165˝

ITEM 9-8418 $299.99SPECIFICATIONS• New, double acting • Retracted lgth. 24˝• Bore x Stroke 5˝ x 12˝ • Crosstube ends• Pressure 3000 PSI max. rod 6½˝ w., base 7½˝ w.• Rod dia. 2.165˝ • Pin holes 1½˝• Ports ⅜˝ NPT • Shpg. 83 lbs.

5˝ x 16˝ x 2˝

ITEM 9-8419 $229.99SPECIFICATIONS • Rod end drilled thru-hole• New, double acting Pin hole ⅝˝• Bore x Stroke 5˝ x 16˝ • Base end flat plate• Pressure 2500 PSI max. Size 5¼˝ x 1½˝ x ½˝• Rod dia. 2˝ • Mount two ½˝ holes• Ports ⅜˝ NPT on 2¼˝ ctrs.• Retracted lgth. 23¼˝ • Shpg. 71 lbs.

5˝ x 32½˝ x 4˝

ITEM 9-9519 $494.95• Unused, old inventory. COMMERCIALINTERTECH #B6189, 9370.672121. Somelight surface rust. Extra set of M14 x 1.5parallel thread with O-ring metric ports.SPECIFICATIONS • Retracted lgth. 47¼˝• Double acting • Crosstube rod• Bore x Stroke 5˝ x 32½˝ O.D. 3¼˝• Barrel thickness 5/16˝ Width 5¼˝• Pressure 3000 PSI max. • Tang base• Rod dia. 4˝, hollow Width 6⅛˝wall ¼˝ thick Pin center to tang end 1⅝˝

• Port, extend SAE 16 • Pin holes 2˝• Port, retract SAE 12 • Shpg. 210 lbs.

Truck freight only.

5˝ x 24˝ x 2˝Log Splitter Cylinder

ITEM 9-7850 $327.70• Brand new, FISHER HYDRAULICS hy-draulic cylinder used on many popularbrands of log splitters. Rated 3500 PSI toprovide up to 34 tons of force. Ideal cylin-der for replacement use or for buildingheavy duty log splitters.SPECIFICATIONS• Double acting • Retracted lgth. 31⅞˝• Bore x Stroke 5˝ x 24˝ • Rod thru-hole 1½˝ w.• Pressure 3500 PSI max. • Pin hole 9/16˝• Rod dia. 2˝ • Base clevis 1⅞˝ wide• Push port JIC 8 M • Pin hole 1¼˝• Retract port ½˝ NPTM • Shpg. 74 lbs.

5˝ x 9¼˝ x 2˝

ITEM 9-9724 $179.95• Unused, old inventory. Cylinder featurestwo Ambac Model 848 0.045˝ cartridgevalves.SPECIFICATIONS• Double acting • Ports SAE 6• Bore x Stroke 5˝ x 9¼˝ • Retracted lgth. 21˝• Barrel thickness 5/16˝ • Tang ends 2˝ thick• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 2˝ • Shpg. 77 lbs.

5˝ x 54˝ x 2¾˝

ITEM 9-8755 $899.99• New, welded cylinder with thread-ingland cap. Retract port faces base end.Extend port has 40˝ transfer tube, facesrod end.SPECIFICATIONS • Ports SAE 12, see paragraph• Double acting • Retracted lgth. 73˝• Bore x Stroke 5˝ x 54˝ • Rod tang with• Barrel thickness ⅜˝ swivel eye 3˝ thick• PSI max. • Base tang 2˝ thick2342 push, 4000 pull • Pin holes 2¼˝

• Rod dia. 2¾˝ • Shpg. 360 lbs.Truck freight only.

5½˝ x 62¾˝ x 3˝

ITEM 9-8023 $799.99SPECIFICATIONS• New EAGLE • Retracted lgth. 77˝• Double acting • Crosstube ends• Bore x Stroke 5½˝ x 62¾˝ rod 5˝ w., base 6½˝ w.• Pressure 3000 PSI max. • Pin holes• Rod dia. 3˝ rod 2½˝ , base 3½˝• Ports ¾˝ NPT • Shpg. 435 lbs.

Truck freight only.

5½˝ x 58˝ x 3½˝

ITEM 9-9062 $799.95• Superficial rust on cartridge valve and valvecavity from storage. Both ports at base end.Counter-balance valve with 3:1 pilot ratio,rated for 30 GPM, set to 4000 PSI.SPECIFICATIONS • Retracted lgth. 767/8˝• New double acting • Rod tang 5½˝ wide• Bore x Stroke 5½˝ x 58˝ Pin hole 33/16˝• Pressure 3000 PSI max. • Base clevis 4˝ wide• Rod dia. 3½˝ Pin hole 2˝• Ports SAE 12 • Shpg. 445 lbs.

Truck freight only.

5½˝ x 37¼˝ x 3.177˝

ITEM 9-9113 $579.95SPECIFICATIONS • Ports 1˝ four bolt flange,• New code 61• Double acting • Retracted lgth. 51⅜˝• Bore x Stroke 5½˝ x 37¼˝ • Rod tang 3¼˝ thick• Barrel thickness 10mm • Base crosstube 6¾˝ w.• Pressure 3000 PSI max. • Pin holes 2˝• Rod dia. 80mm (3.177˝) • Shpg. 350 lbs.

Truck freight only.

5½˝ x 63˝ x 4˝

ITEM 9-8169 $749.99• Unused, old inventory. Welded cylinderwith thread-in gland cap. Some surfacerust. Rod wiper seals are cracked.SPECIFICATIONS• Double acting • Ports SAE 16• Bore x Stroke 5½˝ x 63˝ • Retracted lgth. 81⅛˝• Barrel thickness ⅜˝ • Rod thru-hole 315/16˝ wide• Pressure 3000 PSI max. • Base crosstube 6½˝ w.• Rod dia. 4˝, hollow • Pin holes 2˝• Rod thickness ¼˝ • Shpg. 340 lbs.

Truck freight only.

6˝ x 13⅝˝ x 2¼˝

ITEM 9-9996 $459.95• Both ports in block at base end of cylin-der. Adjustable counter-balance valveswith pilot ratio 4.5:1, rated to 15 GPM, pre-set to 3900 PSI.SPECIFICATIONS• Unused, old inventory • Retracted lgth. 32⅜˝• Double acting • Rod end crosstube• Bore x Stroke 6˝ x 13⅝˝ O.D. 3¾˝• Pressure 3000 PSI max. • Base end tang 3˝• Rod dia. 2¼˝ • Pin holes• Wall thickness 7/16˝ rod 115/16˝, base 23/16˝• Ports SAE 6 • Shpg. 200 lbs.

Truck freight only.

ITEM 9-9996-A $459.95• Same as ITEM 9-9996 above except withrecessed gland cap.

4.916˝ x 25.5˝ x 2.762˝(125mm x 648mm x 70mm)

ITEM 9-9984 $449.95SPECIFICATIONS• New • Rod dia. 70mm (2.762˝)• Double acting • Ports ¾˝ NPT• Bore x Stroke • Retracted lgth. 44˝125mm x 648mm • Tang ends with swivel eye(4.916˝ x 25½˝) rod 1¾˝ w., base 2⅛˝ w.

• Barrel thickness 11mm • Pin holes 60mm• Pressure 3000 PSI max. • Shpg. 260 lbs.

Truck freight only.


6¼˝ x 51¾˝ x 3½˝

ITEM 9-9819 $984.95• Two extend ports and two retract ports,one of each face out left and right.SPECIFICATIONS• Unused, old inventory • Ports SAE 16• Double acting • Retracted lgth. 77˝• Bore x Stroke 6¼˝ x 51¾˝ • Rod tang w/swivel eye 2¼˝• Pressure 3000 PSI max. • Base end clevis 4⅞˝ wide• Rod dia. 3½˝ • Pin holes 2½˝• Wall thickness ½˝ • Shpg. 570 lbs.

Truck freight only.

7.895˝ x 57.5˝ x 5.50˝(200 mm x 1460 mm x 135 mm)

ITEM 9-10412 $2719.95• Unused, old inventory. Heavy dutywelded cylinder with bolt-on gland cap.Brittle, damaged rod wiper and swivel eyeseals. KOMATSU Part #R209-63-72303.SPECIFICATIONS• Double acting • Retracted lgth. 88.75˝• Bore x Stroke 7.895˝ x 57.5˝ • Tang ends w/swivel eye(200 mm x 1460 mm) • Width 3.875˝ max.

• Barrel thickness 0.615˝ • Pin center to tang end• Pressure 4500 PSI rod 4.375˝, base 4.25˝• Rod dia. 5.50˝ (135 mm) • Pin holes 4.525˝ (115 mm)• Ports 1½˝ four bolt flange • Shpg. 1265 lbs.

Truck freight only.

7˝ x 132˝ x 4˝

ITEM 9-10358 $3295.00• Ring at rod end of barrel measures 10˝outside diameter.SPECIFICATIONS• New, old inventory • Extend port ¾˝ • Double acting 4 bolt flange, code 61• Bore x Stroke 7˝ x 132˝ • Retracted lgth. 160½˝• Pressure 3000 PSI max. • Rod tang w/swivel eye 2˝• Rod dia. 4˝ Pin hole 2½˝• Wall thickness ⅜˝ • Base end flat O.D. 7¾˝• Retract port SAE 14 • Shpg. 1100 lbs.

Truck freight only.

6˝ x 32¾˝ x 4½˝

ITEM 9-9107 $534.95• Unused, old inventory. Internal accumu-lator with ½-20 port in rod-end tang to ac-cept a charging valve for accumulator, nocharging valve installed.SPECIFICATIONS • Rod thickness ⅜˝• Double acting • Ports SAE 12• Bore x Stroke 6˝ x 32¾˝ • Retracted lgth. 56¼˝• Barrel thickness ⅜˝ • Tang ends 1¾˝ wide• Pressure 3000 PSI max. • Pin holes 90mm (3.552˝)• Rod dia. 4½˝, hollow • Shpg. 285 lbs.

Truck freight only.

6˝ x 30˝ x 3½˝

ITEM 9-9518 $699.95• Unused, old inventory. Welded cylinderwith thread-on gland retainer.SPECIFICATIONS• Double acting • Retracted lgth. 53¼˝• Bore x Stroke 6˝ x 30˝ • Tang ends• Barrel thickness ⅜˝ • Thickness 1¾˝• Pressure 3000 PSI max. • Pin center to tang end 213/16˝• Rod dia. 3½˝ • Pin holes 39/16˝• Ports ¾˝ four bolt flange • Shpg. 315 lbs.

Truck freight only.

6˝ x 45˝ x 4˝

SPECIFICATIONS • Ports 1¼˝ four bolt• Unused, old inventory flange, code 61• Double acting • Retracted lgth. 69˝• Bore x Stroke 6˝ x 45˝ • Tang ends w/swivel eye• Pressure 3500 PSI max. rod 31/32˝, base 3⅛˝• Rod dia. 4˝ • Pin holes 3¼˝• Wall thickness ½˝ • Shpg. 650 lbs.

Truck freight only.

ITEM 9-10292-L $984.95• Ports face to the left when looking atbase end of cylinder. Part# 708-7623.

ITEM 9-10292-R $984.95• Ports face to the right when looking atbase end of cylinder. Part# 708-7624.

6˝ x 42˝ x 2½˝

ITEM 9-10207 $684.95SPECIFICATIONS • Ports SAE 4• Unused, old inventory • Retracted lgth. 539/16˝• Double acting • Rod end threaded• Bore x Stroke 6˝ x 42˝ 1¼˝-12 TPI x 2˝ long• Pressure 3000 PSI max. • Base end clevis 3¾˝• Rod dia. 2½˝ • Pin hole 1¼˝• Wall thickness ⅜˝ • Shpg. 250 lbs.

Truck freight only.

7˝ x 62¼˝ x 4½˝

ITEM 9-10402 $1545.95SPECIFICATIONS• Unused, old inventory • Extend port• Double acting 1¼˝ 4-bolt flange, code 61• Bore x Stroke 7˝ x 62¼˝ • Retract port SAE 20• Barrel thickness ½˝ • Tang ends with swivel eye• Pressure 3000 PSI max. 227/32˝ wide• Rod dia. 4½˝ • Pin holes 3¼˝• Retracted lgth. 93˝ • Shpg. 960 lbs.

Truck freight only.

8˝ x 74½˝ x 5.512˝

ITEM 9-10337 $2993.00SPECIFICATIONS • Ports 1½˝ 4 bolt flange,• Unused, old inventory code 62• Double acting • Tang ends with swivel eye• Bore x Stroke 8˝ x 74½˝ rod 3⅞˝ w., base 45/16˝ w.• Barrel thickness ¾˝ • Pin holes• Pressure 3000 PSI max. rod 115mm (4.524˝),• Rod dia. 140mm (5.512˝) base 130mm (5.141˝)• Retracted lgth. 113½˝ • Shpg. 1800 lbs.

Truck freight only.

8˝ x 109¼˝ x 6½˝

ITEM 9-10364 $2919.95• Unused, old inventory. Welded cylinderwith bolt-on gland cap. Superficial rust andscrapes.SPECIFICATIONS • Ports 1¼˝ 4-bolt flange• Double acting • Retracted lgth. 134˝• Bore x Stroke 8˝ x 109¼˝ • Tang ends w/swivel eye• Barrel thickness 7/16˝ • Width 3˝ max.• Pressure 3500 PSI max. • Pin center to tang end 35/16˝• Rod dia. 6½˝, hollow • Pin holes 3⅛˝wall 7/16˝ thick • Shpg. 910 lbs.

Truck freight only.

8˝ x 49½˝ x 4½˝

ITEM 9-10194 $1594.95SPECIFICATIONS• Unused, old inventory • Rod thickness solid• Double acting • Ports SAE 20• Bore x Stroke 8˝ x 49½˝ • Retracted lgth. 77⅝˝• Barrel thickness ½˝ • Tang ends w/swivel eye 31/16˝• Pressure 3000 PSI max. • Pin holes 3½˝• Rod dia. 4½˝ • Shpg. 840 lbs.

Truck freight only.

11˝ x 58˝ x 6½˝

ITEM 9-9120 $2995.00• Unused, old inventory. Welded cylinderwith thread-in gland retainer. Hollow rod.Paint scratched and scraped, light surfacerust. Secondary SAE 10 extend port inbase end.SPECIFICATIONS • Rod tang w/ swivel eye• Double acting Thickness 3½˝ max.• Bore x Stroke 11˝ x 58˝ Pin center to tang end 4¼˝• Barrel thickness ½˝ Pin hole 4˝• Pressure 3000 PSI max. • Crosstube base• Rod dia. 6½˝, hollow O.D. 6˝wall 9/16˝ thick Width 15¼˝

• Ports 1˝ four bolt flange Pin hole 4⅜˝• Retracted lgth. 78˝ • Shpg. 1020 lbs.

Truck freight only.



Retracted Length


’’You can find cylinderdefinitions on page 52

76 Single & Double Acting Telescoping Cylinders www.surpluscenter.com8

5½˝ x 78⅜˝ x 4˝

ITEM 9-7533 $1395.00SPECIFICATIONS• New, Leach • Ports SAE 16• Double acting, telescoping• Retracted lgth. 58¼˝• Main cylinder bore x • Rod tang with swiveltotal stroke 5½˝ x 78⅜˝ eye 2½˝ thick

• Number of stages 2 • Base crosstube 8¼˝ w.• Pressure 2000 PSI max. • Pin holes 2˝• Rod dia. 4˝ • Shpg. 285 lbs.

Truck freight only.

5½˝ x 54¼˝ x 4˝

ITEM 9-7525 $1395.00SPECIFICATIONS• New, Leach • Ports SAE 16• Double acting, telescoping• Retracted lgth. 58˝• Main cylinder bore x • Rod tang with swiveltotal stroke 5½˝ x 54¼˝ eye 2½˝ thick

• Number of stages 2 • Base crosstube 8¼˝ w.• Pressure 2000 PSI max. • Pin holes 2˝• Rod dia. 4˝ • Shpg. 285 lbs.

Truck freight only.

5¼˝ Bore Cylinders

5¼˝ x 56¼˝ x 3¾˝ITEM 9-8225 $599.99SPECIFICATIONS• New, McNeilus • Retract port SAE 16• Double acting, telescoping• Retracted lgth. 65½˝• Main cylinder bore x • Tang ends with swiveltotal stroke 5¼˝ x 56¼˝ eye 1.377˝ (35mm) thick

• Number of stages 2 • Pin holes• Pressure 2000 PSI max. rod 1.969˝ (50mm),• Rod dia. 3¾˝ base 1.972˝ (50mm)• Extend port SAE 12 • Shpg. 320 lbs.

Truck freight only.

5¼˝ x 73¾˝ x 3¾˝ITEM 9-8224 $799.99SPECIFICATIONS• New McNeilus • Extend port SAE 16• Double acting, telescoping• Retract port SAE 12• Main cylinder bore x • Retracted lgth. 65¼˝total stroke 5¼˝ x 73¾˝ • Tang ends with swivel eye

• Number of stages 2 1⅜˝ thick• Pressure 2000 PSI max. • Pin holes 50mm• Rod dia. 3¾˝ • Shpg. 305 lbs.

Truck freight only.

5¼˝ x 92¼˝ x 3¾˝ITEM 9-8222 $849.95SPECIFICATIONS• New • Extend port SAE 16• Double acting, telescoping• Retract port SAE 12• Main cylinder bore x • Retracted lgth. 65¼˝total stroke 5¼˝ x 92¼˝ • Tang ends with swivel eye

• Number of stages 2 1⅜˝ wide• Pressure 2000 PSI max. • Pin holes 50mm (1.96˝)• Rod dia. 3¾˝ • Shpg. 310 lbs.

Truck freight only.

Single Acting Telescoping Cylinders

7¼˝ x 86¼˝ x 2¾˝

ITEM 9-10126 $977.95SPECIFICATIONS• Unused, old inventory • Port SAE 16• Single acting, telescoping • Retracted lgth. 31½˝• Main cylinder bore x • Rod thru-hole 211/16˝total stroke 7¼˝ x 86¼˝ • Base crosstube 8¼˝ w.

• Number of stages 5 • Pin holes• Pressure 2000 PSI max. rod 1½˝, base 3½˝• Rod dia. 2¾˝ • Shpg. 300 lbs.

Truck freight only.

6¼˝ x 63¾˝ x 3¾˝

ITEM 9-8220 $899.99SPECIFICATIONS• New. McNeilus • Port SAE 12 w/ restrictor• Single acting, telescoping • Retracted lgth. 35¼˝• Main cylinder bore x • Rod tang 2˝ thicktotal stroke 6¼˝ x 63¾˝ • Base crosstube 7¼˝ w.

• Number of stages 3 • Pin holes• Pressure 2000 PSI max. rod 2˝, base 3.61˝• Rod dia. 3¾˝ • Shpg. 260 lbs.

Truck freight only.

4¾˝ x 63˝ x 2¾˝

ITEM 9-9583 $878.95• New. McNeilus. Additional 1˝ thick tangwith 111/16˝ pin hole welded to base end ofbarrel.SPECIFICATIONS• Double acting, telescoping• Ports SAE 14• Main cylinder bore x • Retracted lgth. 68˝total stroke 4¾˝ x 63˝ • Crosstube ends

• Number of stages 2 rod 63/16˝ w., base 5˝ w.• Pressure 2000 PSI max. • Pin holes 2˝• Rod dia. 2¾˝ • Shpg. 360 lbs.

Truck freight only.

4½˝ x 39˝ x 2˝

ITEM 9-8308 $599.99SPECIFICATIONS• New • Retract port SAE 4• Double acting, telescoping• Retracted lgth. 21˝• Main cylinder bore x • Rod end 4 bolttotal stroke 4½˝ x 39˝ 4˝ x 4½˝ sq. flange

• Number of stages 3 2⅝˝ x 3⅝˝ mounting• Pressure 1000 PSI max. holes ⅜˝ dia.• Rod dia. 2˝ • Base tapped ½˝-13 x ¾˝• Extend port SAE 8 • Shpg. 72 lbs.

8½˝ x 46⅞˝ x 6¾˝

ITEM 9-9621 $999.99SPECIFICATIONS• Unused old inventory • Rod dia. 6¾˝• Single acting, telescoping • Ports 1˝ NPT• Main cylinder bore x • Retracted lgth. 34¼˝total stroke 8½˝ x 46⅞˝ • Tang ends 2˝ thick

• Number of stages 2 • Pin holes 1½˝• Pressure 2000 PSI max. • Shpg. 330 lbs.

Truck freight only.

6¼˝ x 72⅞˝ x 2¾˝

ITEM 9-10219 $899.99SPECIFICATIONS• Unused, old inventory • Port SAE 12• Single acting, telescoping • Retracted lgth. 32½˝• Main cylinder bore x • Rod thru-hole 2¾˝ widetotal stroke 6¼˝ x 72⅞˝ • Base crosstube 7¼˝ w.

• Number of stages 4 • Pin holes• Pressure 2000 PSI max. rod 19/16˝, base 3½˝• Rod dia. 2¾˝ • Shpg. 230 lbs.

Truck freight only.

6¼˝ x 72⅞˝ x 2¾˝

ITEM 9-8221 $899.99SPECIFICATIONS• New. McNeilus • Port SAE 12• Single acting, telescoping • Retracted lgth. 31⅝˝• Main cylinder bore x • Rod thru-hole 2¾˝ widetotal stroke 6¼˝ x 72⅞˝ • Base crosstube 7¼˝ w.

• Number of stages 4 • Pin holes• Pressure 2000 PSI max. rod 1½˝, base 3½˝• Rod dia. 2¾˝ • Shpg. 250 lbs.

Truck freight only.

5¼˝ x 166⅛˝ x 2¾˝

ITEM 9-9394 $1049.95• Unused, old inventory. Port in end of rod.Superficial rust.SPECIFICATIONS • Rod tang w/ swivel eye 2˝• Single acting, telescoping Pin hole 1½˝• Main cylinder bore x • Male trunniontotal stroke 5¼˝ x 166⅛˝ trunnion pin width

• Number of stages 3 outside 12⅜˝, inside 9˝• Pressure 2000 PSI max. pin ctr. to rod pin ctr. 11¼˝• Rod dia. 2¾˝ pin ctr. to base end 61½˝• Port SAE 12 trunnion pin 1¾˝• Retracted lgth. 11¼˝ • Shpg. 370 lbs.

Truck freight only.

Bore - Inside diameter of cylinderStroke - How far a cylinder extends outR-length - Distance in inches between pin

centers when cylinder is retractedRod Diameter - Diameter of cylinder rod






Cylinders Definitions Rod Port Base PortRod Diam.


Bore

800-488-3407 Double Acting Telescoping Cylinders 77&

6¼˝ x 168˝ x 2¾˝

ITEM 9-9585 $995.95SPECIFICATIONS• Unused, old inventory • Extend port SAE 20• Double acting, telescoping• Retract port SAE 16• Main cylinder bore x • Retracted lgth. 80¼˝total stroke 6¼˝ x 168˝ • Tang ends with swivel eye

• Number of stages 3 2¼˝ thick• Pressure 2000 PSI max. • Pin holes 2˝• Rod dia. 2¾˝ • Shpg. 560 lbs.

Truck freight only.

6¼˝ x 163⅞˝ x 2¾˝

ITEM 9-9103 $995.95SPECIFICATIONS• New. McNeilus • Extend port SAE 20• Double acting, telescoping• Retract port SAE 16• Main cylinder bore x • Retracted lgth. 82˝total stroke 6¼˝ x 163⅞˝ • Tang ends with swivel

• Number of stages 3 eye 2¼˝ thick• Pressure 2000 PSI max. • Pin holes 2˝• Rod dia. 2¾˝ • Shpg. 600 lbs.

Truck freight only.

5½˝ x 182½˝ x 3˝

ITEM 9-9102 $1495.00SPECIFICATIONS• New. Mailhot Industries/McNeilus• Double acting, telescoping• Extend port SAE 12• Main cylinder bore x • Retract port SAE 16total stroke 5½˝ x 182½˝ • Retracted lgth. 81½˝

• Number of stages 3 • Crosstube ends 7˝ wide• Pressure 2500 PSI max. • Pin holes 2˝• Rod dia. 3˝ • Shpg. 550 lbs.

Truck freight only.

5½˝ x 118½˝ x 4˝

ITEM 9-10415 $1195.95SPECIFICATIONS• New, HYCO • Ports SAE 16• Double acting, telescoping• Retracted lgth. 97½˝• Main cylinder bore x • Rod tang with swiveltotal stroke 5½˝ x 118½˝ eye 2½˝ thick

• Number of stages 2 • Base crosstube 7¾˝ w.• Pressure 2000 PSI max. • Pin holes 2˝• Rod dia. 4˝ • Shpg. 400 lbs.

Truck freight only.

5½˝ BoreTelescoping Cylinders

• New. Mailhot Industries three stage, dou-ble acting telescoping cylinders. Cartridgevalve installed in rod end.

5½˝ x 134˝ x 3˝ITEM 9-7608 $1495.00SPECIFICATIONS • Relief valve 2750 PSI• Double acting, telescoping• Retract port SAE 12• Main cylinder bore x • Retracted lgth. 77½˝total stroke 5½˝ x 134˝ • Rod crosstube 5˝ w.

• Number of stages 3 • Base tang with swivel• Pressure 2000 PSI max. eye 2⅝˝ thick• Rod dia. 3˝ • Pin holes 2½˝• Extend port SAE 16 • Shpg. 490 lbs.

Truck freight only.

5½˝ x 145¼˝ x 3˝ITEM 9-7609 $1495.00SPECIFICATIONS• Double acting, telescoping• Retract port SAE 12• Main cylinder bore x • Retracted lgth. 77½˝total stroke 5½˝ x 145¼˝ • Rod crosstube 5˝ w.

• Number of stages 3 • Base tang with swivel• Pressure 2500 PSI max. eye 211/16˝ thick• Rod dia. 3˝ • Pin holes 2½˝• Extend port SAE 16 • Shpg. 460 lbs.

Truck freight only.

5½˝ x 156¾˝ x 3˝ITEM 9-7805 $1495.00SPECIFICATIONS • Extend port SAE 16• Double acting, telescoping• Retract port SAE 12• Main cylinder bore x • Retracted lgth. 76½˝total stroke 5½˝ x 156¾˝ • Rod crosstube 6⅞˝ w.

• Number of stages 3 • Base tang 4½˝ thick• Pressure 2500 PSI max. • Pin holes 2˝• Rod dia. 3˝ • Shpg. 460 lbs.

Truck freight only.

5½˝ x 167⅞˝ x 3˝ITEM 9-7610 $1495.00SPECIFICATIONS • Relief valve 2750 PSI• Double acting, telescoping• Retract port SAE 12• Main cylinder bore x • Retracted lgth. 77½˝total stroke 5½˝ x 167⅞˝ • Rod crosstube 5˝ w.


Truck freight only.

5½˝ x 168⅝˝ x 3˝

ITEM 9-7612 $1495.00SPECIFICATIONS • Extend port SAE 16• Double acting, telescoping• Retract port SAE 12• Main cylinder bore x • Retracted lgth. 82¼˝total stroke 5½˝ x 168⅝˝ • Rod crosstube 6⅞˝ w.

• Number of stages 3 • Base tang 4½˝ thick• Pressure 2000 PSI max. • Pin holes 2˝• Rod dia. 3˝ • Shpg. 470 lbs.

Truck freight only.

5½˝ x 181½˝ x 3˝ITEM 9-7806 $1495.00SPECIFICATIONS• Double acting, telescoping• Retract port SAE 12• Main cylinder bore x • Retracted lgth. 83½˝total stroke 5½˝ x 181½˝ • Rod crosstube 5˝ w.


Truck freight only.

6½˝ x 191½˝ x 3˝

ITEM 9-7804 $1495.00SPECIFICATIONS• New. Hyco • Rod tang with swivel• Double acting, telescoping eye 3˝ thick• Main cylinder bore x Pin hole 2˝total stroke 6½˝ x 191½˝ • Male trunnion

• Number of stages 4 trunnion pin width• Pressure 2000 PSI max. outside 10⅛˝, inside 8⅛˝• Rod dia. 3˝ pin ctr. to rod pin ctr. 17¾˝• Extend port SAE 16 pin ctr. to base end 57¼˝• Retract port SAE 20 trunnion pin 2˝ dia.• Retracted lgth. 17¾˝ • Shpg. 575 lbs.

Truck freight only.

6½˝ x 115¾˝ x 4˝

ITEM 9-7854 $1395.00SPECIFICATIONS• New • Ports SAE 14• Double acting, telescoping• Retracted lgth. 58¼˝• Main cylinder bore x • Rod tang w/swivel eye 2½˝total stroke 6½˝ x 115¾˝ • Base crosstube 7⅛˝ w.

• Number of stages 3 • Pin holes• Pressure 2000 PSI max. rod 2˝, base 2⅛˝• Rod dia. 4˝ • Shpg. 380 lbs.

Truck freight only.

6½˝ x 167˝ x 4˝

ITEM 9-8170-A $994.95SPECIFICATIONS• Unused, old inventory • Extend port SAE 20• Double acting, telescoping• Retract port SAE 16• Main cylinder bore x • Retracted lgth. 85¼˝total stroke 6½˝ x 167˝ • Tang ends with swivel eye

• Number of stages 3 rod 2˝ thick, base 3˝ thick• Pressure 2500 PSI max. • Pin holes 2˝• Rod dia. 4˝ • Shpg. 590 lbs.

Truck freight only.

6¾˝ x 131˝ x 3˝

ITEM 9-7520 $1449.00SPECIFICATIONS• New • Ports SAE 14• Double acting, telescoping• Retracted lgth. 62½˝• Main cylinder bore x • Rod tang w/swivel eye 2½˝total stroke 6¾˝ x 131˝ • Base crosstube 7¼˝ w.

• Number of stages 4 • Pin holes• Pressure 2000 PSI max. rod 2˝, base 2⅛˝• Rod dia. 3˝ • Shpg. 480 lbs.

Truck freight only.

13˝ x 185˝ x 6¼˝

ITEM 9-9130 $8995.95SPECIFICATIONS • Rod dia. 6¼˝• Unused, old inventory • Retract port 1˝• Double acting, telescoping 4-bolt flange, code 61• Main cylinder bore x • Retracted lgth. 75¼˝total stroke 13˝ x 185˝ • Tang ends

• Number of stages 4 rod 413/16˝ w., base 329/32˝ w.• Pressure 1500 PSI max. • Pin holes• Extend port 1½˝ rod 7¾˝, base 6¼˝4-bolt flange, code 61 • Shpg. 2750 lbs.

Truck freight only.

7½˝ x 138⅞˝ x 3¾˝

ITEM 9-9578 $1473.95SPECIFICATIONS • Rod dia. 3¾˝• New. McNeilus • Ports SAE 12• Double acting, telescoping• Retracted lgth. 60½˝• Main cylinder bore x • Rod tang w/swivel eye 2˝ w.total stroke 7½˝ x 138⅞˝ • Base crosstube 8¼˝ w.

• Number of stages 4 • Pin holes 2˝• Pressure 2000 PSI max. • Shpg. 550 lbs.

Truck freight only.

78 Dynamic Hydraulic Motors www.surpluscenter.com8Dynamic Hydraulic Motors

BMPH Series• Brand new DYNAMIC BMPH series hydraulic motors. Gerotorpower element. Interchangeable with the following motor lines:Char-Lynn H, Danfoss DH, White RS, Parker/Ross MG/TB.SPECIFICATIONS FOR BMPH SERIES• Reversible rotation • Shaft 1˝ diam. woodruff keyed• Ports ½˝ NPT • SAE 4 case drain

2 Bolt 4 Bolt PSI Torque in. lbs. RPM GPM ITEM ITEM Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. Price 9-7077-50 9-7076-50 3.15 1840 2425 717 956 880 975 11.85 13.15 59/16˝ x 3¼˝ x 3¼˝ 16 lbs. $129.95 9-7077-80 9-7076-80 4.75 1840 2425 1140 1514 740 825 15.8 19.75 5⅝˝ x 3¼˝ x 3¼˝ 17 lbs. $132.95 9-7077-100 9-7076-100 5.90 1840 2425 1425 1885 590 675 15.8 19.75 5¾˝ x 3¼˝ x 3¼˝ 17 lbs. $133.95 9-7077-125 9-7076-125 7.20 1840 2425 1790 2372 475 595 15.8 19.75 515/16˝ x 3¼˝ x 3¼˝ 17 lbs. $139.95 9-7077-160 9-7076-160 9.50 1840 2425 2170 3026 370 465 15.8 19.75 6⅛˝ x 3¼˝ x 3¼˝ 18 lbs. $143.95 9-7077-200 9-7076-200 11.60 1625 2425 2530 3450 295 370 15.8 19.75 65/16˝ x 3¼˝ x 3¼˝ 18 lbs. $148.95 9-7077-250 9-7076-250 14.10 1625 2060 3185 4035 240 295 15.8 19.75 69/16˝ x 3¼˝ x 3¼˝ 19 lbs. $152.95 9-7077-315 9-7076-315 19.00 1625 1840 3575 4470 190 235 15.8 19.75 7¾˝ x 3¼˝ x 3¼˝ 19 lbs. $156.95 9-7077-400 9-7076-400 23.60 1450 1540 3850 4717 150 185 15.8 19.75 7⅜˝ x 3¼˝ x 3¼˝ 20 lbs. $160.95

BMRS Series• Brand new DYNAMIC BMRS series hydraulic motors. Gerolorpower element. Interchangeable with the following motor lines:Char-Lynn S, Danfoss DS, White RS, Parker/Ross MG/TB.SPECIFICATIONS FOR BMRS SERIES• Reversible rotation • Shaft 1˝ diam. woodruff keyed• Ports SAE 10 • SAE 4 case drain

2 Bolt 4 Bolt PSI Torque in. lbs. RPM GPM ITEM ITEM Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. Price 9-7079-50 9-7078-50 3.15 2061 2576 885 1115 755 970 10.5 13.1 511/16˝ x 3¼˝ x 3¾˝ 18 lbs. $160.95 9-7079-80 9-7078-80 4.75 2576 2944 1682 1947 750 940 15.8 19.75 515/16˝ x 3¼˝ x 3¾˝ 19 lbs. $166.95 9-7079-100 9-7078-100 5.90 2576 2944 2124 2478 600 750 15.8 19.75 61/16˝ x 3¼˝ x 3¾˝ 19 lbs. $169.95 9-7079-125 9-7078-125 7.20 2576 2944 2584 3010 475 600 15.8 19.75 6¼˝ x 3¼˝ x 3¾˝ 19 lbs. $172.95 9-7079-160 9-7078-160 9.50 2429 2944 3273 3806 375 470 15.8 19.75 6⅝˝ x 3¼˝ x 3¾˝ 20 lbs. $177.95 9-7079-200 9-7078-200 11.60 1914 2576 3168 3965 300 375 15.8 19.75 6⅞˝ x 3¼˝ x 3¾˝ 21 lbs. $184.95 9-7079-250 9-7078-250 14.10 1619 2061 3115 4159 240 300 15.8 19.75 7¼˝ x 3¼˝ x 3¾˝ 22 lbs. $189.95 9-7079-315 9-7078-315 19.00 1251 1693 3186 4159 190 240 15.8 19.75 7¾˝ x 3¼˝ x 3¾˝ 23 lbs. $193.95 9-7079-375 9-7078-375 23.6 1251 1693 3717 4850 160 200 15.8 19.75 83/16˝ x 3¼˝ x 3¾˝ 24 lbs. $200.95

BMSY Series• Brand new DYNAMIC BMSY series hydraulic motors. Gerolor power element. Ta-pered roller bearings on output shaft for high axial and radial load capacity. Inter-changeable with the following motor lines: Char-Lynn 2000, Danfoss OMS/OMSS,White RE/DH, Parker/Ross MB/TF.SPECIFICATIONS FOR BMS SERIES• Reversible rotation • Mount 2 bolt SAE A • Woodruff keyed shafts in sizes shown• Ports SAE 10 • SAE 4 case drain

1˝ Shaft 1¼˝ Shaft PSI Torque in. lbs. RPM GPM ITEM ITEM Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. Price 9-7080-80 9-7081-80 4.95 2576 3091 1682 2124 800 990 17.1 21.0 6⅝˝ x 53/16˝ x 41/16˝ 26 lbs. $250.95 9-7080-100 9-7081-100 6.15 2576 3091 2124 2655 748 900 19.7 23.6 6¾˝ x 53/16˝ x 41/16˝ 26 lbs. $253.95 9-7080-125 9-7081-125 7.63 2576 3091 2744 3275 600 720 19.7 23.6 7˝ x 53/16˝ x 41/16˝ 27 lbs. $256.95 9-7080-160 9-7081-160 9.59 2208 3091 2780 3805 470 560 19.7 23.6 7¼˝ x 53/16˝ x 41/16˝ 28 lbs. $259.95 9-7080-200 9-7081-200 12.2 2061 2355 3540 4124 375 450 19.7 23.6 79/16˝ x 53/16˝ x 41/16˝ 29 lbs. $261.95 9-7080-250 9-7081-250 15.4 1840 2355 3983 4779 300 360 19.7 23.6 8˝ x 53/16˝ x 41/16˝ 31 lbs. $272.95 9-7080-315 9-7081-315 19.2 1766 2061 4956 5823 240 280 19.7 23.6 87/16˝ x 53/16˝ x 41/16˝ 31 lbs. $294.95 9-7080-375 9-7081-375 22.6 1472 1766 5098 6195 200 240 19.7 23.6 815/16˝ x 53/16˝ x 41/16˝ 32 lbs. $315.95

800-488-3407 Char-Lynn Hydraulic Motors 79&

Char-Lynn 2000 Series Low Speed Motors

• Brand new CHAR-LYNN 2000 series hydraulic motors. Geroler power element. Tapered rollerbearings on output shaft for high axial and radial load capacity. Interchangeable with the fol-lowing motor lines: Dynamic BMS, Danfoss OMS/OMSS, White RE/DH, Parker/Ross MB/TF.SPECIFICATIONS FOR 2000 SERIES• Reversible rotation • Mount 2 bolt SAE A • 1˝ dia. shafts woodruff keyed• Ports SAE 12 • SAE 4 case drain • 1¼˝ dia. shafts straight keyed

1˝ Shaft 1¼˝ Shaft PSI Torque in. lbs. RPM GPM ITEM # ITEM # Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. Price 9-072-1037 9-072-1061 4.9 3000 4000 2065 3035 908 908 20 20 75/16˝ x 5⅛˝ x 4¼˝ 28 lbs. $531.65 9-072-1038 9-072-1062 6.2 3000 4000 2630 3950 742 924 20 25 7½˝ x 5⅛˝ x 4¼˝ 28 lbs. $520.05 9-072-1039 9-072-1063 8.0 3000 4000 3420 4970 576 720 20 25 7¾˝ x 5⅛˝ x 4¼˝ 28 lbs. $541.40 9-072-1040 9-072-1064 9.6 3000 3750 4040 5040 477 713 20 30 7¾˝ x 5⅛˝ x 4¼˝ 28 lbs. $544.30 9-072-1041 9-072-1065 11.9 3000 3750 4780 5890 385 577 20 30 8˝ x 5⅛˝ x 4¼˝ 28 lbs. $536.20 9-072-1042 9-072-1066 14.9 3000 3750 5850 7250 308 462 20 30 8⅜˝ x 5⅛˝ x 4¼˝ 29 lbs. $561.95 9-072-1043 9-072-1067 18.7 3000 3750 6750 7820 246 365 20 30 8⅞˝ x 5⅛˝ x 4¼˝ 31 lbs. $584.75 9-072-1044 9-072-1068 24.0 2250 2500 6840 8170 191 287 20 30 97/16˝ x 5⅛˝ x 4¼˝ 32 lbs. $584.75

Char-Lynn Hydraulic MotorsS Series

• Brand new CHAR-LYNN S series hydraulic motors. Gerolerpower element. Interchangeable with the following motor lines:Dynamic BMRS, Danfoss DS, White RS, Parker/Ross MG/TB.SPECIFICATIONS FOR S SERIES• Reversible rotation • Shaft 1˝ diam. woodruff keyed• Ports SAE 10

2 Bolt Mount 4 Bolt Mount PSI Torque in. lbs. RPM GPM Item # Price Item # Price Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. 983-1537 $361.10 983-1570 $355.90 3.6 2000 2500 943 1174 962 1155 15 18 57/16˝ x 4¼˝ x 4¼˝ 17 lbs. 983-1034 $363.30 983-1010 $358.10 4.6 2000 2500 1228 1529 762 991 15 20 5½˝ x 4¼˝ x 4¼˝ 17 lbs. 983-1035 $367.70 983-1011 $362.55 5.9 2000 2500 1591 1991 585 811 15 20 5⅝˝ x 4¼˝ x 4¼˝ 18 lbs. 983-1538 $374.35 983-1571 $369.20 7.3 2000 2500 2010 2490 470 631 15 20 5¾˝ x 4¼˝ x 4¼˝ 18 lbs. 983-1539 $383.25 983-1572 $378.05 8.8 1900 2350 2332 2861 385 523 15 20 5⅞˝ x 4¼˝ x 4¼˝ 19 lbs. 983-1036 $388.40 983-1012 $383.25 10.1 1900 2300 2567 3072 353 457 15 20 6˝ x 4¼˝ x 4¼˝ 19 lbs. 983-1037 $399.45 983-1013 $394.30 11.4 1850 2250 2870 3450 303 405 15 20 6⅛˝ x 4¼˝ x 4¼˝ 19 lbs. 983-1038 $417.20 983-1014 $412.05 14.1 1700 2050 3265 3877 243 337 15 20 65/16˝ x 4¼˝ x 4¼˝ 20 lbs. 983-1039 $443.05 983-1015 $437.85 18.2 1500 1800 3641 4295 192 254 15 20 6¾˝ x 4¼˝ x 4¼˝ 21 lbs. 983-1040 $468.90 983-1016 $463.70 22.7 1300 1500 4004 4548 153 204 15 20 7˝ x 4¼˝ x 4¼˝ 22 lbs.

Char-Lynn Hydraulic MotorsH Series

• Brand new CHAR-LYNN H series hydraulic motors. Gerotorpower element. Interchangeable with the following motor lines:Dynamic BMPH, Danfoss DH, White RS, Parker/Ross MG/TB.SPECIFICATIONS FOR H SERIES• Reversible rotation • Shaft 1˝ diam. woodruff keyed• Ports ½˝ NPT

2 Bolt Mount 4 Bolt Mount PSI Torque in. lbs. RPM GPM Item # Price Item # Price Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. 981-1025 $249.95 981-1001 $244.95 2.8 1800 2400 650 876 969 1127 12 14 5¼˝ x 35/16˝ x 35/16˝ 13 lbs. 981-1026 $256.95 981-1002 $251.95 4.5 1800 2400 1044 1401 760 904 15 18 5⅜˝ x 35/16˝ x 35/16˝ 13 lbs. 981-1027 $263.95 981-1003 $258.95 5.9 1800 2400 1368 1829 585 701 15 18 5½˝ x 35/16˝ x 35/16˝ 14 lbs. 981-1028 $292.40 981-1004 $287.25 9.7 1650 2250 2059 2824 353 471 15 20 513/16˝ x 35/16˝ x 35/16˝ 15 lbs. 981-1029 $304.95 981-1005 $299.80 11.3 1600 2150 2343 3151 304 405 15 20 6˝ x 35/16˝ x 35/16˝ 15 lbs. 981-1030 $313.95 981-1006 $307.95 14.1 1450 2000 2669 3671 243 324 15 20 6¼˝ x 35/16˝ x 35/16˝ 16 lbs. 981-1031 $330.95 981-1007 $324.95 17.9 1350 1800 3110 4121 192 256 15 20 69/16˝ x 35/16˝ x 35/16˝ 16 lbs. 981-1032 $361.95 981-1008 $355.95 22.6 1250 1500 3604 4283 152 202 15 20 7˝ x 35/16˝ x 35/16˝ 16 lbs.

80 Hydraulic Motors www.surpluscenter.com8

50 Series HP and torque specifications listed at 2500 PSI GPM for HP at ITEM Displ. 1800 RPM Torque 1800 RPM Price 9-7074-195 1.95 17 775 in-lbs. 18 $319.95 9-7074-232 2.32 20 900 in-lbs. 23 $331.95 9-7074-274 2.74 23.75 1050 in-lbs. 28 $339.45 9-7074-330 3.30 28.5 1275 in-lbs. 33 $370.95 9-7074-380 3.80 33 1450 in-lbs. 38 $370.95 9-7074-520 5.20 45 2000 in-lbs. 65 $495.95

40 Series HP and torque specifications listed at 2500 PSI GPM for HP at ITEM Displ. 1800 RPM Torque 1800 RPM Price 9-7073-50 0.50 4.4 180 in-lbs. 4.8 $184.95 9-7073-75 0.75 6.5 280 in-lbs. 7.5 $192.95 9-7073-100 1.00 8.8 375 in-lbs. 10 $201.95 9-7073-125 1.25 10.9 475 in-lbs. 13.5 $210.95 9-7073-150 1.50 13 575 in-lbs. 16 $218.95 9-7073-180 1.80 15.5 700 in-lbs. 20 $227.95

Compact, Hi-Torque Hydraulic Motors

• Brand new CHAR-LYNN “J” Series. Use on machine tools, augers, drilling/tapping ma-chines, conveyors, sweepers, fans, etc. Compact size fits almost anywhere.SPECIFICATIONS• Rotation reversible • Shaft ⅝˝ diam. x 1⅜˝ w/ keyway • Size 2⅜˝ x 4⅞˝• Ports SAE 6; Case drain SAE 3 • Mount 5 bolts on 1.775˝ diam. BC, 1.241˝ diam. pilot • Shpg. 7 lbs.

PSI Torque in. lbs. RPM GPMITEM Model Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Price9-1785 129-0001 0.50 2030 2400 141 164 1992 2458 4.5 5.5 $240.959-1155 129-0002 0.79 2030 2400 225 263 1575 1859 5.5 6.5 $242.959-1156 129-0003 1.21 2030 2400 333 405 1043 1226 5.5 6.5 $245.959-1157 129-0004 1.93 1750 2175 446 546 650 767 5.5 6.5 $252.959-8525 129-0458 3.0 1400 2030 549 743 393 465 5.5 6.5 $256.95

Parker MGG Hydraulic Motors• Brand new, PARKER MGG Series. Gerotor design hydraulic motor. Heavy duty roller bearings, aluminumcase, Buna-N seals. Can also be used as a pump up to 3500 RPM max. Wide range of displacement,mounting and port location options to fit specific applications.

SPECIFICATIONS FOR ALL• Speed: 5000 RPM max as motor,• Speed: 3500 RPM max as pump• Rotation reversible• Shaft 9/16˝ x 1½˝ w/ ⅛˝ keyway• Size 5½˝ x 3½˝ x 3⅜˝• Shpg. 5 lbs.

4 Bolt Mount 2 Bolt Mount GPMDispl. Motor Rear Ports Side Ports Rear Ports Side Ports for Max. PSI PSI Torquecu. in. Model ITEM Model ITEM Model ITEM Model ITEM Model Price RPM Cont. Int. in. lbs. Port0.218 MGG20010 9-8499 BB1A3 9-4765 BB1B3 9-1180 BA1A3 9-6590 BA1B3 $194.95 4.75 2000 2500 70 SAE 80.372 MGG20016 9-8500 BB1A3 9-4766 BB1B3 9-1181 BA1A3 9-6591 BA1B3 $200.95 8.05 2000 2500 118 SAE 80.45 MGG20020 9-8501 BB1A3 9-4767 BB1B3 9-1182 BA1A3 9-6592 BA1B3 $207.95 9.75 2000 2500 144 SAE 80.58 MGG20025 9-8502 BB1A3 9-4768 BB1B3 9-1183 BA1A3 9-6593 BA1B3 $213.95 12.55 2000 2500 184 SAE 100.7 MGG20030 9-8503 BB1A3 9-4769 BB1B3 9-1184 BA1A3 9-6594 BA1B3 $219.95 15.15 1500 2000 222 SAE 10

Cross High Speed Hydraulic Gear Motors• Brand new CROSS hydraulic gear motors. Pressure balanced loading plates for high efficiency. Aluminum body for goodheat dissipation. Pressure lubricated Teflon impregnated sleeve bearings. Internal check valves eliminate need for case

drain at shaft seal pressures under 250 PSI.

40 Series 50 SeriesSPECIFICATIONS SPECIFICATIONS• PSI 3000 max. • Mount SAE A 2 Bolt • PSI 3000 max. • Mount SAE B 2 Bolt• RPM 3000 max. cont. • Ports SAE 12 • RPM 3000 max. cont. • Ports SAE 16• Reversible rotation drain port ¼˝ NPT • Reversible rotation drain port SAE 5• Shaft ⅝˝ x 1¼˝ keyed • Shpg 9 lbs. • Shaft ⅞˝ x 1⅝˝ keyed • Shpg 19 lbs.

800-488-3407 Hydraulic Motors 81&

PTO Drive Motors• Brand new, hydraulic motor with agricultural standard 6 tooth splined shaft. Gerolor powerelement. Tapered roller bearings on output shaft for high axial and radial load capacity. Shafthas retention groove centered 1½˝ from shaft end.• Interchangeable with the following motor lines: Char-Lynn 2000, Danfoss OMS/ OMSS, WhiteRE/DH, Parker-Ross MB/TF.SPECIFICATIONS FOR ALL• Rotation reversible • Ports SAE 10 • Mount 2 bolt SAE A• Case drain SAE 4 • Shaft 1⅜˝x 4˝ 6T spline • Size 7⅜˝ x 53/16˝ x 41/16˝

Displ. PSI Torque in. lbs. RPM GPM HP cu. in. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Cont. Int.

9-7368-80 4.95 2576 3091 1682 2124 800 990 17.1 21 21.3 26.9 26 lbs. $249.959-7368-100 6.15 2576 3091 2124 2655 748 900 19.7 23.6 25.2 31.5 27 lbs. $267.959-7368-125 7.63 2576 3091 2744 3275 600 720 19.7 23.6 26.1 31.1 28 lbs. $269.959-7368-160 9.59 2208 3091 2780 3805 470 560 19.7 23.6 20.9 28.4 29 lbs. $272.95

ITEM Shpg. Price

Char-Lynn 10,000 Series Hydraulic Motors

• Brand new CHAR-LYNN 10,000 series hydraulic motors.Most powerful series of Disc Valve motors made by Eaton.SPECIFICATIONS FOR 10,000 SERIES• Reversible rotation • Mtg. flange SAE C 4 bolt• Ports SAE 16 • SAE 6 case drain

2¼˝ d. x 4.49˝ Keyed Shaft 2⅛˝ d. 16T Splined Shaft PSI Torque in. lbs. RPM GPM ITEM # Price ITEM # Price Displ. Cont. Int. Cont. Int. Cont. Int. Cont.Int. Size Shpg. 9-7075-1028 $2429.95 9-7075-1032 $2475.95 21.0 3000 4000 9220 12,310 501 784 45 70 15˝ x 6˝ x 6˝ 101 lbs. 9-7075-1029 $2472.95 9-7075-1033 $2520.95 29.3 3000 4000 13,050 17,410 354 552 45 70 15½˝ x 6˝ x 6˝ 105 lbs. 9-7075-1030 $2525.95 9-7075-1034 $2569.95 40.6 3000 3750 18,450 23,080 254 396 45 70 15½˝ x 6˝ x 6˝ 105 lbs. 9-7075-1031 $2609.95 9-7075-1035 $2650.95 57.4 2750 3500 23,910 30,460 179 279 45 70 16¼˝ x 6˝ x 6˝ 110 lbs.

Heavy Duty Hydraulic Motors• Brand new, DYNAMIC BMK6 heavy duty hydraulic motors. Interchangeable withChar-Lynn 6000 series motors.SPECIFICATIONS• Rotation reversible• Mount SAE C 4 bolt, 6⅜˝ bolt circle, 5˝ pilot dia.• Shaft 1½˝ dia. x 3.01˝ shaft with 5/16˝ key, tapped ⅜-16• Ports SAE 16

PSI Torque in.lbs. RPM GPMITEM Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. Price

9-8665-200 11.93 2900 4350 5000 7434 765 865 39.6 44.9 10.43˝ x 5.75˝ x 5.75˝ 61 lbs. $489.959-8665-250 15.01 2900 4350 6284 9558 610 830 39.6 54.1 10.67˝ x 5.75˝ x 5.75˝ 62 lbs. $494.959-8665-315 19.01 2900 4350 8142 11727 480 690 39.6 59.4 10.94˝ x 5.75˝ x 5.75˝ 64 lbs. $509.959-8665-400 23.87 2900 4350 10266 14382 382 570 39.6 59.4 11.30˝ x 5.75˝ x 5.75˝ 65 lbs. $539.959-8665-500 29.95 2900 3985 12789 16639 304 455 39.6 59.4 11.73˝ x 5.75˝ x 5.75˝ 68 lbs. $559.959-8665-630 38.01 2535 3260 13099 13726 240 360 39.6 59.4 12.32˝ x 5.75˝ x 5.75˝ 71 lbs. $599.959-8665-800 48.96 2030 2245 13984 16639 186 280 39.6 59.4 13.11˝ x 5.75˝ x 5.75˝ 75 lbs. $609.959-8665-1000 59.9 2030 2030 14824 16462 152 230 39.6 59.4 13.89˝ x 5.75˝ x 5.75˝ 79 lbs. $629.95

SPECIFICATIONS • Shaft 1⅜˝ dia. 6T spline, 3½˝ long• Disp. 11.95 cu. in./rev. • Rqd. filtration 25 micron• Motor geroler disc valve • Ports SAE 16• Performance 43 HP at 540 RPM with 32 GPM, 3000 PSI input • Case drain SAE 4• PSI 3000 cont., 4500 int. • Mount 4 bolt wheel, 7¼˝ B.C.• Torque: 5100 in-lbs. cont. 7620 in-lbs. int. • Front extension 3.88˝ w/5˝ dia. pilot• RPM 775 cont., 866 int. • Body length 7¼˝ back from mtg. flange face• GPM 40 cont., 45 int. • Overall size 11˝ x 6½˝ x 6½˝• Rotation reversible • Shpg. 64 lbs.

High Capacity PTO Drive Motor

ITEM 9-8635 $799.99• New, CHAR-LYNN 6000 Series Model 113-1112 hydraulic motor with agricultural standardsix tooth splined shaft. Wheel mount with oversized tapered roller bearings on output shaftfor high axial and radial load capacity. Shaft has retention groove centered ⅞˝ from shaft end.

Char-LynnHydraulicMotors

• New CHAR-LYNN 2000 series hydraulicmotor. Bearingless design especially de-signed for powering gear boxes, winches,auger drives and other direct mount appli-cations. Bearingless motor drives must uti-lize a bearing supported internal spline tomate to motor drive shaft.

ITEM 9-074-1009 $119.99SPECIFICATIONS • GPM 20 cont., 25 int.• Disp. 6.2 cu. in. / rev. • Rotation reversible• Motor Type Geroler • Mount 4 bolt on 5˝ bolt circle• PSI 3000 cont., 4500 int. • Shaft 1˝ 12 tooth spline• Torque: • Ports SAE 102630 in-lbs. cont., • Case drain SAE 43950 in-lbs. int. • Size 5¼˝ x 4¾˝ x 4¾˝

• RPM 742 cont., 924 int. • Shpg. 20 lbs.

ITEM 9-074-1011 $119.99SPECIFICATIONS • GPM 20 cont., 30 int.• Disp. 9.65 cu. in. / rev. • Rotation reversible• Motor Type Geroler • Mount 4 bolt on 5˝ bolt circle• PSI 3000 cont., 3750 int. • Shaft 1˝ 12 tooth spline• Torque: • Ports SAE 104040 in-lbs. cont., • Case drain SAE 45040 in-lbs. int. • Size 5¼˝ x 4¾˝ x 4¾˝


5.4 cu. in. BucherHydraulicMotorITEM 9-7569$199.95• New, Bucher Hydraulics Model BHB090-A9312. 6 bolt mount for either SAE A ormagneto mounting.SPECIFICATIONS • GPM 16 cont., 20 int.• Displ. 5.4 cu. in. / rev. • Rotation reversible• Motor type geroler • Mount 6 bolt SAE A• PSI 3000 cont., 3500 int. • Shaft 25 mm dia. x 1¾ ̋keyed• Torque • Ports ½˝ BSPP2000 in-lbs. cont., • Case drain ¼˝ BSPP2400 in-lbs. int. • Size 7⅞˝ x 5¼˝ x 4˝


3.36 cu inHydraulicMotorITEM 9-7442$219.99• New, SUNDSTRAND Model SNU3/ -55SSC 07/8G.SPECIFICATIONS • Mount SAE B 2 bolt• Disp. 3.36 cu.-in. / rev. • Shaft ⅞˝ 13 T spline x 1¼˝• Pressure 3045 PSI • In port 1¼˝ 4 bolt flange• Speed 2300 RPM max. • Out port 1½˝ 4 bolt flange• Flow 33 GPM max. • Size 6⅛˝ x 6¾˝ x 6⅛˝• Rotation CW • Shpg. 18 lbs.

82 Hydraulic Motors www.surpluscenter.com8

12.2 cu. in. BucherHyd.Motor

ITEM 9-7567 $148.95• New, BUCHER Hydraulics Model BRGL -200A18.SPECIFICATIONS• Displ. 12.2 cu. in. / rev. • GPM 12 cont., 15 int.• Motor type geroler • Rotation reversible• PSI 2000 cont., 2750 int. • Mount 2 bolt SAE A• Torque • Shaft 25 mm dia. x 1⅝ ̋keyed3350 in-lbs. cont., • Ports ½˝ BSPP4650 in-lbs. int. • Size 7⅜˝ x 5¼˝ x 4˝


12.4 cu. in. BucherHyd. Motor

ITEM 9-9324$229.95

• New BUCHER HYDRAULICS BREL200-A38-10-E0G hydraulic motor. SAE A ormagneto mount. Built-in relief valve.SPECIFICATIONS• Disp. 12.4 cu. in. / rev. • Relief valve 1500 PSI• Motor Type Geroler • Rotation reversible• PSI 3000 cont., 3500 int. • Mount• Torque: 2 bolt SAE A or Magneto4800 in-lbs. cont. • Shaft 1˝ dia. x 1.97˝ keyed5600 in-lbs. int. • Ports ½˝ BSPP

• RPM 300 cont., 370 int. • Size 6½˝ x 5¼˝ x 7˝• GPM 18 cont., 22 int. • Shpg. 28 lbs.

3.83 cu. in.ParkerMotor

ITEM 9-7847$299.99

• New, PARKER Commercial Hyd raulicsModel 323-9219-027 hyd raulic gear motorwith outboard bearing.SPECIFICATIONS• Disp. 3.83 cu. in. / rev. • Rotation reversible• Motor type gear • Mount 4 bolt SAE B• Pressure 3500 PSI • Shaft ⅞-13T spline• Flow 61.7 GPM • Ports SAE 16• Power 99.6 HP • Case drain SAE 4• Torque 2615 in-lbs. • Size 9½˝ x 7⅜˝ x 6¼˝• Speed 2400 RPM • Shpg. 58 lbs.

5.1 cu. in.Motor

ITEM 9-7022$249.95• New, COMMERCIAL SHEARING ModelM51A978BEOL20-7 hydraulic motor.Heavy duty, cast iron construction.SPECIFICATIONS • Power 56 HP max.• Displ. 5.1 cu. in. • Rotation reversible• 2500 PSI max. • Mount 4 bolt SAE C• Torque 1770 in-lb. at • Shaft 1¼˝14T spline (SAE C)49 GPM & 2500 PSI • Ports 1¼˝ flange

• RPM 2000 max. • Case drain ¼˝ NPT• 1800 RPM at 45 GPM • Size 8⅛˝ x 5¾˝ x 6⅞˝• 2000 RPM at 50 GPM max. • Shpg. 50 lbs.

2.5 cu. in. WhiteHydraulic

MotorITEM 9-8287$89.99

• New, WHITE DRIVE PRODUCTS WR Se-ries Model 255040F3DD22AAAA motor.SPECIFICATIONS • GPM 12 cont., 16 int.• Disp. 2.5 cu. in. / rev. • Rotation reversible• Motor Type Roller Stator • Mount 4 bolt 3.25˝ B.C.• PSI 2250 cont., 3000 int. • Shaft 1˝ dia. x 1¾˝ keyed• Torque • Ports SAE 10823 in-lbs. cont. • Case drain SAE 41088 in-lbs. int. • Size 5⅝˝ x 4˝ x 4˝


Hydraulic Motors• New, MARZOCCHIuni-directional hyd-raulic motors. Side ports.

0.25 cu. in.ITEM 9-7870 $49.95SPECIFICATIONS• Model 1AMS6 ST N G P 043• Disp. 0.25 cu. in. / rev. • Torque 5 in-lbs at 1450 PSI• Motor type gear • Rotation CCW• PSI 3000 cont., 3600 peak • Mount 4 bolt USA 4F17• Speed: • Shaft 0.172˝ thick tang1725 RPM at 1.87 GPM • Ports SAE 83450 RPM at 3.74 GPM • Size 4⅜˝ x 3˝ x 3¼˝4000 RPM max. • Shpg. 5 lbs.0.835 cu. in.ITEM 9-7871 $59.95SPECIFICATIONS• Model 1AMS20 STN GP 043• Disp. 0.835 cu. in./rev. • Rotation CCW• Motor type gear • Mount 4 bolt USA 4F17• PSI 2200 cont., 2800 peak • Shaft 0.172˝ thick tang• Speed: • Ports SAE 10 (side)1725 RPM at 6.234 GPM • Size 5½˝ x 215/16˝ x 3½˝2000 RPM max. • Shpg. 6 lbs.

3.45 cu. in.GearMotor

ITEM 9-8420$399.99

• New, PARKER Model 324-9210-083 hy-draulic gear motor with outboard bearing.SPECIFICATIONS• Disp. 3.45 cu.in./rev. • Rotation reversible• Motor Type Gear • Mount 4 bolt SAE B• Pressure 3250 PSI • Shaft 1˝ dia. x 2˝ w/¼˝ key• Flow 43.8 GPM • Ports SAE 12• Power 92 HP • Case drain SAE 4• Torque 1595 in-lbs. • Size 7⅞˝ x 7˝ x 6˝• Speed 3000 RPM • Shpg. 43 lbs.

6.1 cu. in.Hyd.MotorITEM 9-8588$199.95• New PARKER TF Series hydraulic motor.Roller vane motor with zero leak commu-tation valve provides greater, more consis-tent power over its operating range. Fullflow lubrication maximizes cooling and ex-tends operating life.SPECIFICATIONS • GPM 15 cont., 20 max.• Model TF0100BS280AAAA• RPM 560 cont., 749 max.• Displ. 6.1 cu.in./rev. • Mount 2 Bolt SAE B• PSI 2250 cont., 3500 int. • Ports SAE 10• Torque • Shaft ⅞-13 tooth spline1746 in.-lbs. cont., • Size 7¼˝ x 7⅞˝ x 4⅞˝2813 in.-lbs. int. • Shpg. 35 lbs.

24.7 cu. in. HydraulicMotors With Brake

• New ROSS hydraulic wheel motor withbrake. Roller vane power element. Heavyduty roller bearings. Brake holding capacity9000 in. lbs. Full release at 460 PSI. SAE 4brake release port. Cast iron housing.SPECIFICATIONS FOR BOTH• Disp. 24.7 cu. in. / rev. • GPM 20 cont., 25 int.• Motor Type Vane • Rotation reversible• PSI 2500 cont., 3500 int. • Mount 4 bolt on 6¾˝ B.C.• Torque: • Shaft 1½˝ diam. x 2⅞˝8336 in-lbs. cont., tapered w/castle nut11877 in-lbs. int. • Ports SAE 10

• RPM 162 cont., 232 int. • Case drain N/A

ITEM 9-10068$649.95

• Model ME246731JCAC. Side ports 180°apart. Size 13⅛˝ x 6¾˝ x 6¾˝. Shpg. 77 lbs.

ITEM 9-9142$649.95

• Model ME246731JCAB. Side ports side-by-side. Size 14˝ x 6¾˝ x 6¾˝. Shpg. 83 lbs.

24 cu. in. HydraulicWheelMotor

ITEM 9-8636 $429.95• New, CHARLYNN 4000 Series Model110-1213 hydraulic wheel motor. Speciallow noise valve plate. Seal guard to protectshaft seal.SPECIFICATIONS • Rotation reversible• Disp. 24 cu. in. / rev. • Mount 4 bolt wheel mount• Motor Type Geroler • Shaft 1⅝˝ tapered x• PSI 2750 cont., 3500 int. 3¼˝ total lgth., 7/16˝ key,• Torque 1¼-18 thread w/nut8240 in-lbs. cont., • Ports SAE 1010470 in-lbs. int. • Case drain SAE 4

• RPM 239 cont., 376 int. • Size 6½˝ x 5⅞˝ x 5⅞˝• GPM 25 cont., 40 int. • Shpg. 50 lbs.

5 Bolt WheelHubITEM 1-1726$45.45• Brand new. 1¼˝ ID tapered cast iron hubfor use with drive wheel applications.Drilled/ tapped ½-20 flange for wheel studs.SPECIFICATIONS• 5 bolt on 4½˝ bolt circle • 2½˝ diam. wheel pilot• 1¼˝ ID hub tapered 1½˝/ft. • Size 5⅜˝ dia. x 1½˝ thick• ½˝-20 drilled/tapped flange • Shpg. 6 lbs.

12 cu. in. Hyd. WheelMotorITEM 9-8614$239.95

• New, PARKER TF Series wheel mounthydraulic motor. Roller vane design withsealed commutator.SPECIFICATIONS • Rotation reversible• Model TF0195US080AAX • Mount 4 bolt wheel• Disp. 12 cu.in./rev. • 5.812 bolt circle,• PSI 2000 cont., 3000 int. 3¼˝ pilot dia.• Torque • Shaft 1¼˝ tapered x 4.21˝3222 in-lb. cont., w/5/16˝ key and threaded end4971 in-lb. int. • Ports SAE 10

• RPM 288 cont., 381 int. • Size 6.15˝ x 5.25˝ x 5.45˝• GPM 15 cont., 20 int. • Shpg. 36 lbs.

800-488-3407 Hydraulic Wheel Motors & Hubs 83&

Dynamic BMER Hydraulic Wheel Motors

• Brand new, DYNAMIC BMER series wheel mount hydraulic motors. Interchangeablewith PARKER and WHITE motors.

SPECIFICATIONS• Rotation reversible • Shaft 1¼˝ tapered x 4.21˝ shaft w/5/16˝ key and threaded end• Mount 4 bolt wheel 5.812 bolt circle, 3¼˝ pilot dia. • Ports SAE 10

Displ. PSI Torque in.lbs. RPM GPMITEM cu. in. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. Price

9-8592-125 7.2 2970 3480 2876 3363 360 490 11.8 15.8 4.68˝ x 5.24˝ x 5.43˝ 29 lbs. $228.809-8592-160 9.52 2970 3480 3983 4646 375 470 15.8 19.8 4.80˝ x 5.24˝ x 5.43˝ 30 lbs. $256.809-8592-200 11.96 2970 3480 4691 5310 330 425 18.5 22.4 4.94˝ x 5.24˝ x 5.43˝ 31 lbs. $256.809-8592-230 13.91 2970 3480 5531 6284 290 365 18.5 22.4 5.04˝ x 5.24˝ x 5.43˝ 31 lbs. $272.009-8592-250 15.68 2970 3480 6195 6992 290 350 19.8 23.7 5.14˝ x 5.24˝ x 5.43˝ 32 lbs. $284.809-8592-300 18.08 2970 3480 7169 8231 250 315 21.1 25 5.30˝ x 5.24˝ x 5.43˝ 32 lbs. $315.209-8592-350 21.05 2970 3480 8009 9160 220 270 21.1 23.7 5.43˝ x 5.24˝ x 5.43˝ 33 lbs. $318.409-8592-375 22.63 2970 3480 8762 10089 200 240 19.8 23.7 5.53˝ x 5.24˝ x 5.43˝ 34 lbs. $328.009-8592-475 28.18 2535 2755 9602 10443 160 195 19.8 23.7 5.83˝ x 5.24˝ x 5.43˝ 35 lbs. $342.409-8592-540 32.94 2030 2535 8673 10974 140 170 19.8 23.7 6.14˝ x 5.24˝ x 5.43˝ 36 lbs. $356.809-8592-750 45.45 1520 1740 9293 10443 100 120 19.8 23.7 6.93˝ x 5.24˝ x 5.43˝ 40 lbs. $372.80

4 Bolt WheelHubITEM 1-3161$14.95• New, machined casting wheel hubs withbrake drum. Ideal for mounting wheels ontohydraulic motors with 1¼˝ tapered shaft.SPECIFICATIONS• Wheel studs 4 ½-20 thread• Brake drum dia. 6˝• Bolt circle 4˝ • Size 6½˝ dia. x 1¾˝• Hub 1¼˝ tapered w/keyway • Shpg. 6 lbs.

5 BoltWheelHubs

• New, machined steel casting five boltwheel hub with brake drum. Ideal formounting wheels onto hydraulic motors.

1½˝ Tapered Bore HubITEM 9-9003 $14.95SPECIFICATIONS• Wheel studs 5 • Bore taper 1½˝ per foot• Wheel stud ½˝-20 thread • Thru-hub lgth. 1.838˝• Bolt circle 4½˝ • Brake drum I.D. 6.299˝• Hub 1½˝ tapered w/keyway • Size 7⅜˝ dia. x 29/32˝• Keyway size 5/16˝ • Shpg. 10 lbs.1¼˝ Tapered Bore HubITEM 1-3364 $14.95SPECIFICATIONS• Wheel studs 5 • Bore taper 1½˝ per foot• Wheel stud ½-20 thread • Thru-hub lgth. 129/64˝• Bolt circle 4½˝ • Brake drum dia. 6.299˝• Hub 1¼˝ tapered w/keyway• Size 7⅜˝ dia. x 27/16˝• Keyway size 5/16˝ • Shpg. 10 lbs.

Manifold Portto ½˝ NPT KitITEM 9-4648$19.95• Brand new. Aluminum manifold block forChar-Lynn, Ross, Adan and Hydrocompmotors. Converts manifold port motors to½˝ NPT ports. Includes block and mount-ing bolts. Size 3˝ x 2˝ x 1⅜˝. Shpg. 1 lb.

84 Hydraulic Reservoirs www.surpluscenter.com8Steel Hydraulic Reservoirs

Side or Base Mount• Brand new BUYERS. Constructed of 10 & 12 gauge black powder coated steel. All sides are ported, al-lowing multiple position mounting. Suc tion ports on opposing sides and bottom. Return ports on the othertwo sides and top. Plastic breather cap included. Plastic 1˝ NPTM to ¾˝ NPTF bushing for breather cap.

Oil Capacity Ports NPTITEM Model Nominal Usable Return/Filler Drain Size Shpg. Price9-7948 SMR7S 9.8 7 1˝ (3) ¾˝ (1) 15¾˝ x 14⅞˝ x 11¾˝ 43 lbs. $138.95

Side Mount• Brand new BUYERS welded side mount, heavy duty steel reservoirs. Features includeblack powder coated steel construction, welded side mount brackets, oil level temperaturegauge, magnetic drain plug, internal baffle and chrome plated breather cap with filler bas-ket strainer.

9-7949 9-7952

Oil Capacity Ports NPT WallITEM Model Nominal Usable Suction Return Drain Thickness Size Shpg. Price9-7949 SMR15S 15 11 2˝ (2) 1¼˝ (2) ¾˝ (1) 13 gauge 159/16˝ x 13½˝ x 17½˝ 59 lbs. $210.959-7950 SMR25S 25 18 2˝ (2) 1¼˝ (2) ¾˝ (1) 13 gauge 20˝ x 1413/16˝ x 201/16˝ 71 lbs. $224.959-7951 * SMR30S 37.1 30 2˝ (2) 1¼˝ (2) ¾˝ (1) 13 gauge 24⅜˝ x 16˝ x 22˝ 92 lbs. $279.95

1˝ (1)9-7952 SMR37S 39.5 37 2˝ (1) 1¼˝ (1) ¾˝ (1) 12 gauge 231/16˝ x 17¼˝ x 231/16˝ 107 lbs. $353.95

½˝ (1)* Also has accessory port ¼˝ NPT

Side Mount With Brackets• Brand new BUYERS side mount, heavy duty 13 gauge steel reservoirs with side mountbrackets and tank straps. Features include black powder coated steel construction, twoside mount brackets with straps, oil level temperature gauge, magnetic drain plug, internalbaffle and chrome plated breather cap with filler basket strainer.

ITEM Model Oil Capacity Ports NPT Size Shpg. Price9-8067 SMS50S 50 2˝ (2) ½˝ (1) 25˝ x 239/16˝ x 26˝ 175 lbs. $469.959-8068 SMS70S 70 2˝ (2) ½˝ (1) 35˝ x 239/16˝ x 26˝ 200 lbs. $519.95

Base Mount• Brand new BUYERS base mount, heavy duty 12 gauge steel reservoirs. Features includeblack powder coated steel construction, welded base brackets with mounting kit, oil leveltemperature gauge, magnetic drain plug, internal baffle and chrome plated breather capwith filler basket strainer.

Oil Capacity Ports NPTITEM Model Nominal Usable Suction Return Drain Size Shpg. Price9-7953 UR50S 55.2 50 2˝ (1) 1¼˝ (1) ¾˝ (1) 34˝ x 14¾˝ x 25½˝ 157 lbs. $386.959-7954 UR70S 70 67.5 2˝ (1) 1¼˝ (1) ¾˝ (1) 49¼˝ x 14¾˝ x 257/16˝ 227 lbs. $522.95

Polymer Hydraulic Reservoirs• Brand new, BUYERS hydraulic reservoirs.Max. fluid temperature150° F., duty cycle 5 minutes. Lightweight and corrosion proof con-struction. Sight level gauge and thermometer, chrome breater cap.

ITEM 9-8064 and 9-8066: Includes mounting brackets and hardware.

ITEM 9-8065: Includes mounting hardware and straps.

ITEM 9-8065 and 9-8066: Includes return line diffuser.9-8066 9-8065 9-8064

Oil Capacity Ports Drain InternalITEM Model Mount Gallons Ports Location Plug Baffle Size Shpg. Price9-8064 SMR25P Side 25 2˝ (2) Bottom Yes Yes 159/16˝ x 13½˝ x 17½˝ 77 lbs. $284.959-8065 SMR50P Side 50 2˝ (2) Side No No 31˝ x 23˝ x 23⅞˝ 136 lbs. $543.959-8066 UR50P Base 50 2˝ (2) Bottom No No 38˝ x 16½˝ x 29˝ 115 lbs. $469.95

800-488-3407 Hydraulic Reservoirs 85&

Weld-in Port Flanges

Forged Steel Stamped Steel

• Brand new. Weld-in port flanges. Ideal for building or modifyinghydraulic reservoirs. Available in forged steel or stamped steel.Forged Steel Weld-In Port Flanges

Port Flange Pilot HoleITEM Size O.D. Required Shpg. Price

9-7843-2 ⅛˝ NPT 15/16˝ 1˝ ⅛ lb. $2.259-7843-4 ¼˝ NPT 15/16˝ 1˝ ⅛ lb. $2.409-7843-6 ⅜˝ NPT 15/16˝ 1˝ ⅛ lb. $2.409-7843-8 ½˝ NPT 1⅝˝ 1¼˝ ⅛ lb. $2.409-7843-12 ¾˝ NPT 2˝ 17/16˝ ¼ lb. $2.259-7843-16 1˝ NPT 2⅜˝ 1¾˝ ¼ lb. $2.759-7843-20 1¼˝ NPT 2⅝˝ 23/16˝ ¼ lb. $3.609-7843-24 1½˝ NPT 2⅞˝ 2⅜˝ ¼ lb. $3.459-7843-SAE24 SAE 24 2⅞˝ 2⅜˝ ¼ lb. $4.159-7843-32 2˝ NPT 3⅜˝ 211/16˝ ½ lb. $4.359-7843-40 2½˝ NPT 4⅛˝ 33/16˝ 1¼ lbs. $6.459-7843-48 3˝ NPT 4⅝˝ 311/16˝ 1½ lbs. $8.559-7843-64 4˝ NPT 5⅞˝ 413/16˝ 3 lbs. $15.95Stamped Steel Weld-In Port Flanges

Port Flange Pilot HoleITEM Size O.D. Required Shpg. Price

9-7844-2 ⅛˝ NPT 1¾˝ 9/16˝ ⅛ lb. $2.009-7844-4 ¼˝ NPT 1¾˝ 11/16˝ ⅛ lb. $2.259-7844-6 ⅜˝ NPT 1¾˝ 13/16˝ ⅛ lb. $1.909-7844-8 ½˝ NPT 1¾˝ 1˝ ⅛ lb. $2.259-7844-12 ¾˝ NPT 2⅜˝ 13/16˝ ⅛ lb. $2.659-7844-16 1˝ NPT 2⅜˝ 17/16˝ ⅛ lb. $2.759-7844-20 1¼˝ NPT 2⅞˝ 113/16˝ ¼ lb. $2.459-7844-24 1½˝ NPT 3⅝˝ 21/16˝ ½ lb. $3.559-7844-32 2˝ NPT 3¾˝ 29/16˝ ½ lb. $3.50

Surplus CenterHydraulic Reservoirs

• Brand new, superior quality hydraulic reservoirs. Con-structed of 12 gauge, black powder-coated steel. Internalbaffle.• One suction port, one return port and one ¾˝ NPT drainwith steel plug. Filler-breather has 10 micron foam filter,quarter-turn cap, mesh basket. Integral mounting foot oneach end, four ⅜˝ mounting holes.• Select a reservoir with useable capacity at least equal to pump flowGPM (e.g. 20 gallon reservoir minimum for system with 20 GPM pump). Made inUSA.

With BaffleUseable Overall SizeCapacity including

ITEM (Gallons) Ports feet & filler Shpg. Price9-8103-10 10 1½˝ NPT and 1˝ NPT 21¼˝ x 15˝ x 13⅝˝ 45 lbs. $152.959-8103-15 15 2˝ NPT and 1½˝ NPT 25¾˝ x 15˝ x 15⅝˝ 57 lbs. $176.959-8103-20 20 2˝ NPT and 1½˝ NPT 26¾˝ x 16⅜˝ x 17⅞˝ 67 lbs. $194.959-8103-25 25 2˝ NPT and 1½˝ NPT 26¾˝ x 17½˝ x 20⅛˝ 83 lbs. $205.95No Baffle • ¾˝ NPT fill port with breather.

Useable Overall SizeCapacity including

ITEM (Gallons) Ports feet & filler Shpg. Price9-8416-3 3 1¼˝ NPT and ¾˝ NPT 12¼˝ x 11¼˝ x 10⅛˝ 24 lbs. $ 87.959-8416-5 5 1¼˝ NPT and ¾˝ NPT 16¾˝ x 12½˝ x 10⅛˝ 31 lbs. $101.95

Internal Tank Strainers• Brand new, ZINGA TFS series tank strainer. Mount in hydraulicreservoir to keep debris from being drawn into pump. Relief valve al-lows oil to bypass if screen becomes clogged to prevent pumpcavitation. 100 mesh. 3 PSI by-pass valve.

NPTM NPTFTank Hose GPM Mesh Overall

ITEM Threads Connect Cap. Size Lgth. Shpg. Price9-7290-50 1˝ ½˝ 5 1⅛˝ d. x 3½˝ 5¼˝ 1 lb. $17.959-7290-75 1¼˝ ¾˝ 8 1½˝ d. x 5½˝ 7˝ 1 lb. $16.059-7290-100 1½˝ 1˝ 14 1¾˝ d. x 59/16˝ 7⅛˝ 1 lb. $18.959-7290-125 2˝ 1¼˝ 23 2¼˝ d. x 77/16˝ 9⅛˝ 2 lbs. $20.959-7290-200 3˝ 2˝ 53 2¼˝ d. x 75/16˝ 9½˝ 3 lbs. $40.959-7290-300 4˝ 3˝ 116 4¼˝ d. x 6⅞˝ 95/16˝ 5 lbs. $56.95

5 Gallon HydraulicLog Splitter Reservoir

ITEM 9-8413 $90.95• Brand new, superior quality log splitterhydraulic or general purpose reservoir.Constructed of 14 gauge, black powder-coated steel. Breather has 10 micron foamfilter. Integral mounting foot on each end.Made in USA.SPECIFICATIONS• Oil capacity:5.5 gallons nominal5 gallons usable

• Ports: 1½˝ NPT x one, ¾˝ NPT x one• Mount 4 bolts 191/16˝ x 71/16˝ c/c• Mounting holes ⅜˝ dia.• Tank size w/o feet or filler 18˝ x 9½˝ x 95/16˝• Tank height to breather cap top 12˝• Footprint 19⅞˝ x 9½˝• Shpg. 23 lbs.

SAE 24 Tank Strainer & Accessories

ITEM 9-7884$9.99• New, tank strainer. Mountin hydraulic reservoir to keepdebris from being drawn into pump.SPECIFICATIONS• Tank thread SAE 24 M • Exposed screen size 1⅝˝ dia. x 6½˝• Outlet thread SAE 20 F • Screen 100 mesh• Flow rate 20 GPM max. • Overall lgth. 8¼˝ • Shpg. 1 lb.

Hosebarb to SAE20M FittingITEM 9-4604-20-20 1¼˝ hosebarb $8.30ITEM 9-4604-24-20 1½˝ hosebarb $12.95Weld-in Port FlangeITEM 9-7843-SAE24 $4.15

¾˝ NPT MagneticDrain PlugITEM 9-8096$2.30• Brand new. Square head magnetic plug.Ideal for use as a drain plug in hydraulicreservoirs. Corrosion resistant plated steel,threads coated with sealant.SPECIFICATIONS • Width across flats ⅝˝• ¾˝ NPT magnetic drain plug • Shpg. ¼ lb.

Reservoir Filler/Breather

Cap

ITEM 9-8747 $13.95• New, LENZ Model 57XL-40 reservoir fillerand breather cap. Plated steel twist-oncap. Opening size on base is 1½˝. Installsinto 2˝ hole with gaskets and screws (all in-cluded).SPECIFICATIONS• 40 micron filter in cap • Basket 1⅞˝ dia. x 3˝• 30 mesh strainer basket • Size 3¼˝ dia. x 5˝• 6 bolt holes on 2⅞ ̋bolt circle • Shpg. 1½ lbs.

86 Hydraulic Breathers & Sight Gauges www.surpluscenter.com8Reservoir Filler/

BreatherCap

ITEM 9-8624 $14.05• Brand new, BUYERS Model TFA005715reservoir filler and breather cap. Chromeplated steel twist-on cap. Opening size onbase is 1½˝. Installs into 2˝ hole with gas-kets and screws (all included).SPECIFICATIONS • Six bolt holes on• 40 micron filter in cap 2⅞˝ bolt circle• 30 mesh strainer basket • Size 3¼˝ dia. x 5˝• Basket 1⅞˝ dia. x 3˝ • Shpg. 1½ lbs.

Tank Breathers

• Brand new, ZINGA MBseries tank breather.Shatter resistant plasticconstruction.SPECIFICATIONS FOR ALL• 10 Micron filtration • Size 111/16˝ diam. x 1⅝˝• Temperatures up to 225° F• Shpg. ¼ lb.

ITEM 9-7285-25 $6.70• ¼˝ NPT male connection.

ITEM 9-7285-38 $6.70• ⅜˝ NPT male connection.

ITEM 9-7285-50 $17.40• ½˝ NPT male connection.

ITEM 9-7285-75 $17.40• ¾˝ NPT male connection.

1½˝ Push-OnBreather CapITEM 9-8285 $3.35• Brand new, push-on plastic breather capfor 1½˝ outside diameter smooth filler tubeon hydraulic reservoirs. Black plastic con-struction with foam filter. Size 2¾˝ diameterx 1½˝. Shpg. ½ lb.

¾˝ NPTBreatherCap

ITEM 9-7957-12$3.90• Brand new, BUYERS PRODUCTS ModelHBF12P plastic breather cap. These unitsact as ventilators to provide a free flow ofclean, fresh air into hydraulic fluid reservoirs.Large oil resistant filter elements filter dirtand dust particles as small as 40 micron.SPECIFICATIONS • Size 111/16˝ diam. x 1⅞˝• Connection ¾˝ NPTM • Shpg. ¼ lb.

Filler-Breather WeldFlange Adapter

ITEM 9-8097$4.65• Brand new. Weld-on adapter for mount-ing common hydraulic filler-breather as-semblies. Unpainted 12 gauge steel.SPECIFICATIONS • Center hole 2.125˝ dia.• Mtg. holes six 0.175˝ dia. • Size 4˝ O.D. x 1.125˝holes on 2.88˝ B.C. • Shpg. ½ lb.

Fluid LevelSight Glass

ITEM 9-7288$5.50• Brand new, ZINGA series OE oil eye fluidlevel sight glass. Weld into reservoir sidefor quick visual reference of reservoir’s fluidlevel. Clear nylon sight glass and non-plated steel base.SPECIFICATIONS • Fits into 15/16˝ diam. hole• 400 PSI max. • Size 1¼˝ dia. x 13/16˝ tall• Temp. -65° F to 150° F • Shpg. ½ lb.

Reservoir Filler/BreatherCapAssemblyITEM 9-7286$16.95• Brand new, ZINGAseries WSFB reser-voir filler and breathercap. Black paintedsteel weather resist-ant twist-on capwith padlock hasp.1½˝ opening on base. Installs into 2˝ holewith gaskets and self-tapping screws (in-cluded). SPECIFICATIONS • 6 bolt holes on 2.88˝ BC• 10 micron foam filter • Basket 115/16˝ dia. x 5¾˝• 6˝ dipstick • Size 35/16˝ diam. x 81/16˝• 30 mesh epoxy basket • Shpg. 1½ lbs.

ITEM 9-7286-4 $15.90• Sames as ITEM 9-7286 above except 4˝dipstick length, basket length is 3¾˝ andoverall size is 35/16˝ diam. x 61/16˝.

ReservoirSight LevelGauges

• Brand new, ZINGA seriesSG reservoir sight levelgauge. Dual scale ther-mometer. Aluminum guard.For use with petroleum andwater base hydraulic fluids.SPECIFICATIONS • Thermometer range• ½˝-13 UN bolts 30° F to 210° F• Shpg. 1 lb. 0° C to 100° C

ITEM 9-7287-3 $15.95• 3˝ mtg. centers. Size 4½˝ x 113/16˝ x 1⅞˝.

ITEM 9-7287-5 $17.95• 5˝ mtg. centers. Size 6⅞˝ x 113/16˝ x 1⅞˝.

ITEM 9-7287-10 $24.70• 10˝ mtg. centers. Size 11⅞˝ x 113/16˝ x 1⅞˝.

FilteredBreather• Use when double actingcylinder is operated as singleacting to keep out dirt whenretracting. Use on reservoirtanks or where air must bedisplaced. Replaceable filterfor cleaning. Size 2⅝˝ x 1¼˝x 1¼˝. Shpg. 5 oz.

ITEM 9-026-A ⅜˝ NPT $12.95ITEM 9-026-B ½˝ NPT $12.95Low ProfileBreathers

• Bronze filter. Shpg. ¼ lb.

ITEM 9-4195-2 ⅛˝ NPTM $2.00ITEM 9-4195-4 ¼˝ NPTM $2.90ITEM 9-4195-6 ⅜˝ NPTM $3.80ITEM 9-4195-8 ½˝ NPTM $4.35ITEM 9-4195-12 ¾˝ NPTM $6.40

¾˝ NPTReservoirBreather

ITEM 9-8457$13.55• Brand new ZINGA TBN310 breather thatmounts in hydraulic reservoir top port toprevent debris from being drawn intoreservoir. Provides better protection and airdisplacement than ordinary push-inbreather caps.SPECIFICATIONS • Air flow cap. 40 SCFM• Connection ¾˝ NPTM • Size 3¾˝ dia. x 5˝• Filtration size 10 micron • Shpg. 2 lbs.

9 Quart HydraulicReservoir

ITEM 9-8616 $29.95• New, poly tank for hydraulic oil. Originallyfor John Deere 757 mowers. Hose barb el-bows on bottom. 2˝ filler neck.SPECIFICATIONS• Oil capacity 9 qts. • Mounting holes• Ports: ½˝ dia. x 2˝ wideBarb for ⅝˝ ID hose • Size 21˝ x 8½˝ x 7½˝Barb for ½˝ ID hose • Actual weight 3 lbs.

• Mount 2 holes 19¼˝ c/c • Shpg. 21 lbs. ( oversize)

800-488-3407 Hydraulic Filters 87&

High PressureInlineFilter

ITEM 9-8465$89.95• New, EATON Model HF2P1SA4JNB1C05high pressure inline filter. Ideal for externalcharge pump filtration and high pressurereturn line filtration. Buna-N Seals.SPECIFICATIONS• 10 GPM • Operating temp. range• SAE 12 ports -15° F to 250° F• 4000 PSI max. • By-pass valve setting 43 PSI• Fluid cleanliness rating • Size 4⅛˝ x 3⅜˝ x 8¾˝18/16/14 or better • Shpg. 13 lbs.

⅜˝ NPT ZingaReturnInline Filter

ITEM 9-7291$11.95• Brand new, ZINGA.SPECIFICATIONS • Ports ⅜˝ NPT• 10 micron • 250° F max.return line application • Built-in 18 PSI by-pass

• 7 GPM return line • Size 3⅛˝ diam. x 4½˝• 200 PSI max. • Shpg. 1½ lbs.Replacement Filter Element

ITEM 9-7291-10-18 10 micron $7.05

Optional⅛˝ NPT ConditionIndicator Gauge

ITEM 9-4544-G$9.50• For use on ITEMS 9-077, 9-7295, 9-4544suction line filters only. Shpg. ½ lb.

High PressureInlineFilter

ITEM 9-7293$146.95• Brand new, ZINGA Se-ries P3000 high pressureinline filter. Ideal for exter-nal charge pump filtrationand high shock return linefiltration. Buna-N Seals.Visual differential pressureindicator.SPECIFICATIONS • Operating temp.• 10 micron filter -40° to 250° F• 30 GPM • By-pass valve setting 50 PSI• SAE 12 ports • Size 4˝ diam. x 13½˝• 3000 PSI max. • Shpg. 6 lbs.

Replacement Filter Element

ITEM 9-7293-10L 10 micron $31.95

High Pressure InlineFilter

ITEM 9-7292$163.90• Brand new, ZINGA series HP3000 highpressure inline filter. Ductile iron housing.Buna-N Seals. Visual differential pressureindicator.SPECIFICATIONS • 3000 PSI max.• 10 micron filter • By-pass valve setting 50 PSI• 60 GPM • Size 3˝ diam. x 9¾˝• SAE 12 ports • Shpg. 11 lbs.Replacement Filter Element

ITEM 9-7292-10 10 micron $13.95Inline HighPress. FilterITEM 9-7297$75.95• Brand new, ZINGA Series CF-90 high pres-sure filter. Designed for use as final filter to pro-tect control valves, not as total system filter.SPECIFICATIONS • 3000 PSI max.• 12 GPM • By-pass valve setting 50 PSI• 10 micron • Size 5˝ x 2½˝ x 2˝• SAE 8 ports • Shpg. 3 lbs.Replacement Filter Element

ITEM 9-7297-10 10 micron $30.95

Ports

¾˝ NPT

1¼˝ NPT

1½˝ NPT

Zinga Spin-On Filter Assemblies

• Brand new, ZINGA spin-on type element. Full flow filteringup to bypass cracking point, partial filtering beyond. 250° Fmax. Suction line filters have ⅛˝ NPT port for optional con-

dition indicator.

Filter Assemblies Replacement(Head and Element) ElementsMax. Bypass Micron

ITEM Application GPM PSI PSI Rating Size Shpg. Price ITEM Price9-059 Return Line 20 100 25 10 7½˝ x 3¾˝ x 3½˝ 3 lbs. $16.95 9-059-10 $7.209-077 Suction Line 9 100 5 25 7½˝ x 3¾˝ x 3½˝ 3 lbs. $17.95 9-059-25 $7.209-4543 Return Line 70 200 25 10 5⅜˝ diam. x 9⅜˝ 6 lbs. $27.45 9-4543-10 $14.959-4544 Suction Line 25 200 5 25 5⅜˝ diam. x 9⅜˝ 6 lbs. $27.45 9-4543-25 $14.959-7294 Return Line 70 200 25 10 5⅛˝ diam. x 13⅞˝ 6 lbs. $39.95 9-7294-10 $17.959-7295 Suction Line 25 200 5 25 5⅛˝ diam. x 13⅞˝ 6 lbs. $39.95 9-7294-25 $17.95

Plastic Seal Pick ToolITEM 9-8099$1.95• Brand new, plastic pick tool for removingO-rings and seals to prevent damage todelicate machined surfaces. 5½˝ overalllength. Shpg. 1/10 lb.

7 GPMReturnLineFilterITEM 9-8598$8.95• New, CLARK Part# 2820460 hydraulic fil-ter with bypass in filter element.SPECIFICATIONS• 7 GPM return line • Built-in by-pass• SAE 6 ports in filter element• Size 31/16˝ dia. x 4⅝˝ long • Shpg. 1½ lbs.Replacement Filter Element

ITEM 9-7291-10-18 10 micron $7.05

Permatex ThreadSealant

ITEM 1-4633$3.95• NEW PERMATEX 14A 80631thread sealant w/Teflon.SPECIFICATIONS• Size 1 fluid oz. • Temp range -65°F to 300°F• Color White • Shpg. 1/10 lb.

88 Hydraulic Hose & Hose Clamps www.surpluscenter.com8

Suction ReturnLine Hose

• Brand new. Top quality.Connect reservoir to pump,low pressure return lines toreservoir. Meets SAE spec.100-R4. Textile fiber and wirespiral reinforced. Tough, oil-proof rubber cover.ITEM 9-1195 $4.65• ¾˝ ID. Rated 300 PSI.Shpg. 7 oz./ft.

ITEM 9-1279 $5.35• 1˝ ID. Rated 250 PSI.Shpg. 10 oz./ft.

ITEM 9-1956 $6.75• 1¼˝ ID. Rated 300 PSI.Shpg. 12 oz./ft.

ITEM 9-1957 $8.80• 1½˝ ID. Rated 300 PSI.Shpg. 16 oz./ft.

Two Wire Braid Hose

Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price 12˝ 918-3212 1 lb. $ 5.45 917-2212 1 lb. $ 6.60 9-078-12 1½ lbs. $11.95 919-2212 2 lbs. $ 16.95 18˝ 918-3218 1 lb. $ 6.60 917-2218 1 lb. $ 7.85 9-078-18 1¾ lbs. $13.95 919-2218 2 lbs. $ 20.95 24˝ 918-3224 1½ lbs. $ 7.80 917-2224 1¼ lbs. $ 9.05 9-078-24 3 lbs. $15.95 919-2224 3 lbs. $ 23.95 30˝ 918-3230 1½ lbs. $ 8.95 917-2230 1½ lbs. $10.95 9-078-30 3 lbs. $17.95 919-2230 4 lbs. $ 26.95 36˝ 918-3236 2 lbs. $10.95 917-2236 1½ lbs. $11.95 9-078-36 3 lbs. $17.95 919-2236 4 lbs. $ 29.95 48˝ 918-3248 3 lbs. $12.95 917-2248 2 lbs. $14.95 9-078-48 4 lbs. $21.95 919-2248 5 lbs. $ 36.00 60˝ 918-3260 3 lbs. $14.95 917-2260 2 lbs. $16.95 9-078-60 5 lbs. $25.95 919-2260 6 lbs. $ 42.95 72˝ 918-3272 3 lbs. $17.95 917-2272 3 lbs. $17.95 9-078-72 6 lbs. $28.95 919-2272 7 lbs. $ 48.95 84˝ 918-3284 3 lbs. $17.95 917-2284 3 lbs. $19.95 9-078-84 7 lbs. $32.95 919-2284 8 lbs. $ 55.95 96˝ 918-3296 5 lbs. $19.95 917-2296 4 lbs. $21.95 9-078-96 7 lbs. $36.95 919-2296 9 lbs. $ 61.95 108˝ 918-32108 6 lbs. $21.95 917-22108 5 lbs. $23.95 9-078-108 8 lbs. $40.95 919-22108 10 lbs. $ 67.95 120˝ 918-32120 7 lbs. $23.95 917-22120 6 lbs. $25.95 9-078-120 9 lbs. $43.95 919-22120 11 lbs. $ 74.95 144˝ 918-32144 8 lbs. $27.95 917-22144 7 lbs. $30.95 9-078-144 10 lbs. $51.95 919-22144 13 lbs. $ 84.95 180˝ 918-32180 10 lbs. $33.95 917-22180 8 lbs. $36.95 9-078-180 14 lbs. $61.95 919-22180 16 lbs. $102.95 240˝ 918-32240 13 lbs. $43.95 917-22240 11 lbs. $47.95 9-078-240 17 lbs. $79.95 919-22240 21 lbs. $134.95 300˝ 918-32300 15 lbs. $53.95 917-22300 14 lbs. $58.95 9-078-300 20 lbs. $94.95 919-22300 26 lbs. $164.95

NPT Hydraulic Hose Lengths• Brand new. Top quality, wire braid with NPT male fittings each end.

One Wire Braid Hose

Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price 12˝ 916-1412 1 lb. $ 4.85 903-3812 1 lb. $ 5.10 905-1212 1 lb. $ 5.85 18˝ 916-1418 1 lb. $ 5.80 903-3818 1 lb. $ 6.05 905-1218 1 lb. $ 6.85 24˝ 916-1424 1 lb. $ 6.65 903-3824 1¼ lbs. $ 7.00 905-1224 1¼ lbs. $ 7.95 30˝ 916-1430 1¼ lbs. $ 7.55 903-3830 1¼ lbs. $ 8.95 905-1230 1½ lbs. $ 9.00 36˝ 916-1436 1¼ lbs. $ 8.45 903-3836 1½ lbs. $10.95 905-1236 1½ lbs. $10.95 48˝ 916-1448 1½ lbs. $10.95 903-3848 1½ lbs. $10.95 905-1248 2 lbs. $12.95 60˝ 916-1460 1½ lbs. $12.00 903-3860 2 lbs. $12.95 905-1260 2 lbs. $14.95 72˝ 916-1472 1¾ lbs. $13.95 903-3872 2 lbs. $14.95 905-1272 3 lbs. $16.95 84˝ 916-1484 1¾ lbs. $15.95 903-3884 3 lbs. $16.95 905-1284 3 lbs. $16.95 96˝ 916-1496 2 lbs. $17.95 903-3896 4 lbs. $16.95 905-1296 4 lbs. $18.95 108˝ 916-14108 3 lbs. $17.95 903-38108 5 lbs. $18.95 905-12108 5 lbs. $20.95 120˝ 916-14120 4 lbs. $18.95 903-38120 6 lbs. $19.95 905-12120 6 lbs. $21.95 144˝ 916-14144 5 lbs. $21.95 903-38144 7 lbs. $23.95 905-12144 7 lbs. $25.95 180˝ 916-14180 6 lbs. $26.95 903-38180 8 lbs. $27.95 905-12180 8 lbs. $30.95 240˝ 916-14240 8 lbs. $33.95 903-38240 10 lbs. $36.95 905-12240 11 lbs. $39.95 300˝ 916-14300 9 lbs. $41.95 903-38300 12 lbs. $44.95 905-12300 14 lbs. $49.00

¼˝ ID• 100R17, ¼˝ NPT solid male fittings• Working/burst 3000/12,000 PSI

⅜˝ ID• 100R16, ⅜˝ NPT solid male fittings• Working/burst 4800/19,200 PSI

½˝ ID• 100R16, ½˝ NPT solid male fittings• Working/burst 4000/16,000 PSI

¾˝ ID• 100R16, ¾˝ NPT solid male fittings• Working/burst 3100/12,400 PSI

1˝ ID• 100R17, 1˝ NPT solid male fittings• Working/burst 3000/12,000 PSI

⅜˝ ID• 100R17, ⅜˝ NPT solid male fittings• Working/burst 3000/12,000 PSI

½˝ ID• 100R17, ½˝ NPT solid male fittings• Working/burst 3000/12,000 PSI

PERFT.

PERFT.

PERFT.

PERFT.

Surplus Center HoseITEM Type Clamp Opening Hose Size Item Number Prefix Size Shpg. Price

9-A2-135 Single 13.5 mm (0.53˝) ¼˝ Single Wire 916 1.89˝ x 1.18˝ x 1.54˝ ½ lb. $2.709-A2-14 Single 14 mm (0.55˝) ¼˝ Two Wire 920, 921 1.89˝ x 1.18˝ x 1.54˝ ½ lb. $2.459-A2-172 Single 17.2 mm (0.67˝) ⅜˝ Single Wire 903 1.89˝ x 1.18˝ x 1.54˝ ½ lb. $2.459-A2-18 Single 18 mm (0.71˝) ⅜˝ Two Wire 918, 930, 931 1.89˝ x 1.18˝ x 1.54˝ ½ lb. $2.709-A3-20 Single 20 mm (0.79˝) ½˝ Single Wire 905 2.17˝ x 1.18˝ x 1.61˝ ½ lb. $2.759-A3-213 Single 21.3 mm (0.84˝) ½˝ Two Wire 940, 941 2.17˝ x 1.18˝ x 1.61˝ ½ lb. $2.759-A4-28 Single 28 mm (1.10˝) ¾˝ Single Wire 9-078 2.44˝ x 1.18˝ x 1.89˝ ¾ lb. $3.259-A4-30 Single 30 mm (1.18˝) ¾˝ Two Wire 950, 951 2.44˝ x 1.18˝ x 1.89˝ ¾ lb. $3.259-A5-38 Single 38 mm (1.50˝) 1˝ Two Wire 919 2.91˝ x 1.18˝ x 2.52˝ ¾ lb. $3.75

Hydraulic Hose Clamps• Brand new, hydraulic hose mounting clamp. Weld onto equipment to route hoses. Steeltop and bottom plates with polypropylene clamp set. Single hose styles (dual style onnext page). See chart below for specifications to match your requirements.

Length

800-488-3407 Hydraulic Hose & Hose Clamps 89&

Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price 12˝ 940-2212 1 lb. $10.95 941-2212 1 lb. $11.95 950-2212 2 lbs. $16.95 951-2212 2 lbs. $17.95 18˝ 940-2218 1 lb. $12.95 941-2218 1 lb. $12.95 950-2218 2 lbs. $17.95 951-2218 2 lbs. $17.95 24˝ 940-2224 1¼ lbs. $13.95 941-2224 1¼ lbs. $14.95 950-2224 3 lbs. $19.95 951-2224 3 lbs. $19.95 30˝ 940-2230 1½ lbs. $14.95 941-2230 1½ lbs. $15.95 950-2230 3 lbs. $21.95 951-2230 3 lbs. $21.95 36˝ 940-2236 1½ lbs. $16.00 941-2236 1½ lbs. $16.95 950-2236 3 lbs. $23.95 951-2236 3 lbs. $23.95 48˝ 940-2248 2 lbs. $16.95 941-2248 2 lbs. $17.95 950-2248 4 lbs. $27.95 951-2248 4 lbs. $27.95 60˝ 940-2260 2 lbs. $19.00 941-2260 2 lbs. $19.95 950-2260 5 lbs. $31.95 951-2260 5 lbs. $31.95 72˝ 940-2272 3 lbs. $21.95 941-2272 3 lbs. $22.95 950-2272 6 lbs. $35.95 951-2272 6 lbs. $35.95 84˝ 940-2284 3 lbs. $23.95 941-2284 3 lbs. $24.95 950-2284 7 lbs. $39.95 951-2284 7 lbs. $39.95 96˝ 940-2296 4 lbs. $26.95 941-2296 4 lbs. $26.95 950-2296 8 lbs. $43.95 951-2296 8 lbs. $43.95 108˝ 940-22108 5 lbs. $28.95 941-22108 5 lbs. $29.95 950-22108 9 lbs. $47.95 951-22108 9 lbs. $47.95 120˝ 940-22120 6 lbs. $30.95 941-22120 6 lbs. $31.95 950-22120 10 lbs. $51.95 951-22120 10 lbs. $51.95 144˝ 940-22144 7 lbs. $35.95 941-22144 7 lbs. $36.95 950-22144 11 lbs. $59.95 951-22144 11 lbs. $59.95 180˝ 940-22180 8 lbs. $42.95 941-22180 8 lbs. $43.95 950-22180 15 lbs. $71.95 951-22180 15 lbs. $71.95 240˝ 940-22240 11 lbs. $54.95 941-22240 11 lbs. $55.95 950-22240 19 lbs. $88.95 951-22240 19 lbs. $88.95 300˝ 940-22300 14 lbs. $66.95 941-22300 14 lbs. $67.00 950-22300 22 lbs. $107.95 951-22300 22 lbs. $108.95

JIC Hydraulic Hose Lengths• Brand new. Top quality, 2 wire braid with JIC female fittings each end.

Two Wire Braid Hose

Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price 12˝ 920-2212 1 lb. $ 7.50 921-2212 1 lb. $ 7.50 930-2212 1 lb. $ 7.90 931-2212 1 lb. $ 8.80 18˝ 920-2218 1 lb. $ 8.60 921-2218 1 lb. $ 8.60 930-2218 1 lb. $ 9.15 931-2218 1 lb. $10.95 24˝ 920-2224 1 lb. $ 9.70 921-2224 1 lb. $ 9.70 930-2224 1½ lbs. $10.95 931-2224 1½ lbs. $11.95 30˝ 920-2230 1¼ lbs. $10.95 921-2230 1¼ lbs. $10.95 930-2230 1½ lbs. $11.95 931-2230 1½ lbs. $12.95 36˝ 920-2236 1¼ lbs. $11.95 921-2236 1¼ lbs. $11.95 930-2236 2 lbs. $12.95 931-2236 2 lbs. $13.95 48˝ 920-2248 1½ lbs. $14.95 921-2248 1½ lbs. $14.95 930-2248 3 lbs. $15.95 931-2248 3 lbs. $16.95 60˝ 920-2260 1½ lbs. $16.95 921-2260 1½ lbs. $16.95 930-2260 3 lbs. $17.95 931-2260 3 lbs. $16.95 72˝ 920-2272 1¾ lbs. $16.95 921-2272 1¾ lbs. $16.95 930-2272 3 lbs. $17.95 931-2272 3 lbs. $18.95 84˝ 920-2284 1¾ lbs. $18.95 921-2284 1¾ lbs. $18.95 930-2284 3 lbs. $20.95 931-2284 3 lbs. $20.95 96˝ 920-2296 2 lbs. $20.95 921-2296 2 lbs. $20.95 930-2296 5 lbs. $22.95 931-2296 5 lbs. $23.95 108˝ 920-22108 3 lbs. $22.95 921-22108 3 lbs. $22.95 930-22108 6 lbs. $24.95 931-22108 6 lbs. $25.95 120˝ 920-22120 4 lbs. $24.95 921-22120 4 lbs. $24.95 930-22120 7 lbs. $26.95 931-22120 7 lbs. $27.95 144˝ 920-22144 5 lbs. $28.95 921-22144 5 lbs. $28.95 930-22144 8 lbs. $31.00 931-22144 8 lbs. $31.95 180˝ 920-22180 6 lbs. $34.95 921-22180 6 lbs. $34.95 930-22180 10 lbs. $37.95 931-22180 10 lbs. $38.95 240˝ 920-22240 8 lbs. $43.95 921-22240 8 lbs. $43.95 930-22240 13 lbs. $48.95 931-22240 13 lbs. $49.95 300˝ 920-22300 9 lbs. $53.95 921-22300 9 lbs. $53.95 930-22300 15 lbs. $59.95 931-22300 15 lbs. $60.95

¼˝ ID• 100R16, working/burst 5800/23,200 PSI

⅜˝ ID• 100R16, working/burst 4800/19,200 PSI

½˝ ID• 100R16, working/burst 4000/16,000 PSI

¾˝ ID• 100R17, working/burst 3000/12,000 PSI

JIC 4F Swivel Fittings JIC 6F Swivel Fittings JIC 6F Swivel Fittings JIC 8F Swivel Fittings

JIC 8F Swivel Fittings JIC 10F Swivel Fittings JIC 10F Swivel Fittings JIC 12F Swivel Fittings

Surplus Center HoseITEM Type Clamp Opening Hose Size Item Number Prefix Size Shpg. Price

9-A2-135-D Dual 13.5 mm (0.53˝) ¼˝ Single Wire 916 2.17˝ x 1.18˝ x 1.42˝ 1 lb. $3.459-A2-14-D Dual 14 mm (0.55˝) ¼˝ Two Wire 920, 921 2.17˝ x 1.18˝ x 1.42˝ 1 lb. $3.459-A2-172-D Dual 17.2 mm (0.67˝) ⅜˝ Single Wire 903 2.17˝ x 1.18˝ x 1.42˝ 1 lb. $3.459-A2-18-D Dual 18 mm (0.71˝) ⅜˝ Two Wire 918, 930, 931 2.17˝ x 1.18˝ x 1.42˝ 1 lb. $3.459-A3-20-D Dual 20 mm (0.79˝) ½˝ Single Wire 905 2.76˝ x 1.18˝ x 1.85˝ 1 lb. $3.859-A3-213-D Dual 21.3 mm (0.84˝) ½˝ Two Wire 940, 941 2.76˝ x 1.18˝ x 1.85˝ 1 lb. $3.859-A4-28-D Dual 28 mm (1.10˝) ¾˝ Single Wire 9-078 3.35˝ x 1.18˝ x 2.05˝ 1½ lbs. $4.459-A4-30-D Dual 30 mm (1.18˝) ¾˝ Two Wire 950, 951 3.35˝ x 1.18˝ x 2.05˝ 1½ lbs. $4.459-A5-38-D Dual 38 mm (1.50˝) 1˝ Two Wire 919 4.33˝ x 1.18˝ x 2.52˝ 1½ lbs. $5.65

Hydraulic Hose Clamps• Brand new, hydraulic hose mounting clamp. Weld onto equipment to route hoses. Steeltop and bottom plates with polypropylene clamp set. Dual hose styles (single style on pre-vious page). See chart below for specifications to match your requirements.

Length

Flush Face Quick Coupler

ITEM 9-7698 $32.95• New, Gates HTMA flush face quickcoupler. Includes body and tip. Usedon many skid steer applications.SPECIFICATIONS• Ports ¼˝ NPT • Pressure 3000 PSI working, 12,000 PSI burst• Body Gates 4FQFF-4FP • Size 1⅛˝ dia. x 4˝• Tip Gates 4MQFF-4FP • Shpg. 1 lb.

90 Hydraulic Quick Couplers & Swivels www.surpluscenter.com8Quick CouplerBodyITEM 9-4276$8.95• New FASTER TNV-06. Quick couplerbody with ⅜˝ NPT female end. Size 11/16˝diam. x 2⅛˝. Shpg. 2 lbs.

Hydraulic QuickCoupler TipITEM 9-7512$5.95• New, PARKER Model H4-63-T10 malehydraulic quick coupler tip. For quick con-nect/disconnect of hydraulic hoses. Self-sealing. Poppet check valve prevents oilloss when disconnected. Port SAE 10 maletip only. Shpg. ½ lb.

Hydraulic QuickCoupler TipITEM 9-5146-8$3.95• New, FARMER HYDRAULICS. Agri -cultural OEM style replacement male tipfor hydraulic quick couplers. Ball check.SAE 10. Shpg. ½ lb.

Split Flange Coupling

ITEM 9-4806-A $2.95• New. 90° reusable fitting for 1˝ hose size.1¾˝ dia. flange head. For 4 bolt 1˝ flangesize. Shpg. 2 lbs.

ITEM 9-4808 $2.95• Same as ITEM 9-4806-A above except45°. Shpg. 4 lbs.

1˝ Hose CouplingITEM 9-4807 $4.95• New PARKER. Replace ends of strippedthreads or make custom length hoses.Heavy steel high pressure unit. Fits 1˝ R2hose. JIC16 female swivel. Shpg. 3 lbs.

1˝ Split Flange Ring Kit

ITEM 9-4814 $7.50• New. Split ring kit for 1˝ four bolt flangesize. Includes split rings, bolts, lockwash-ers and O-ring. Shpg. 1 lb.

1˝ NPT Thread-To-Connect Coupling & Accessories• Brand new, HORIZON KST Series thread-to-connect coupling. Includes body and tip.Thread-to-connect design can be connected under pressure, with little or no spillage. In-terchangeable half-for-half with the following: Parker 6100, Perfecting W, Faster FB, Safe-way S51, Snaptite 78, Tomco A51 And Aeroquip 5100.

SPECIFICATIONS FOR COUPLER• Width across “wings” 4½˝ • Coupled length 6½˝• Pressure: working 3000 PSI max., burst 9000 PSI

Coupler Dust Cap Dust PlugITEM Body Size Ports GPM Shpg. Price ITEM Price ITEM Price9-8314 1˝ 1˝ NPT 42.2 5 lbs. $56.95 9-8314-C $12.95 9-8314-P $11.95

Flush Face ISO 16028 Quick Coupler & Accessories• Brand new, HORIZON KSP1 Series flush face quick coupler. Includes body and tip.Used on skid-steer loaders, construction and agricultural equipment. Plated steel con-struction. Inter changeable with other brands that conform to ISO 16028.

SPECIFICATIONS FOR BOTH SIZES• ISO Standard 16028 • Temp. range -25° C to 125° C• Pressure: Working 3000 PSI max., Burst 12000 PSI

Coupler Dust Cap Dust PlugITEM Body Size Ports GPM Shpg. Price ITEM Price ITEM Price9-8288 ½˝ ½˝ NPT 11.9 3 lbs. $38.95 9-8288-C $1.30 9-8288-P $1.709-8313 ¾˝ ¾˝ NPT 26.4 4 lbs. $56.95 9-8313-C $2.10 9-8313-P $1.90

Hydraulic Quick Couplers and Tips• Brand new SAFEWAY. Two piece couplers. ITEM 9-6314, 9-6352 and928-C are two way sleeve type. Can be disconnected by pulling sleeveeither direction. Ball check design prevents leakage when disconnected.

Complete Coupler Extra Tip Thread ITEM Flow PSI Model Type Shpg Price ITEM Model Shpg. Price ¼˝ NPT 9-1626 3 5000 S10-2 Poppet 1 lb. $19.45 9-1626-A S101-2 ½ lb. $5.20 ¼˝ NPT 9-6314 3 3000 S40-2 Ball 1 lb. $16.50 9-5924 S41-2 ½ lb. $4.35 ⅜˝ NPT 9-6347 6 3000 S20-3 Ball 1 lb. $17.40 9-6347-A S41-3 ½ lb. $5.40 ½˝ NPT 928 12 3000 S20-4 Ball 1½ lbs. $17.95 928-AA S71-4 ½ lb. $5.20 ¾˝ NPT 928-C 12 3000 S40-6 Ball 1½ lbs. $25.95 928-D S71-6 1 lb. $8.45

FlangePad Kits

• Brand new. Use to change code61 ports to NPT. Supplied with capscrews, O-ring and adapter.ITEM Shpg. Price9-1714 ¾˝ Flange to ¾˝ NPT 2 lbs. $14.359-1715 1˝ Flange to 1˝ NPT 3 lbs. $15.409-1716 1¼˝ Flange to 1¼˝ NPT 4 lbs. $19.059-1717 1½˝ Flange to 1½˝ NPT 5 lbs. $25.759-1718 2˝ Flange to 2˝ NPT 6 lbs. $32.109-1757 2½˝ Flange to 2½˝ NPT 8 lbs. $59.00

Reusable Split Flange Fittings

800-488-3407 Hydraulic Fittings & Adapters 91&

Hydraulic Live Swivels• Brand new SUPER-SWIVELS hydraulic 90° elbow or inline live swivels. Allow hosesto rotate even when fully pressurized. Zinc-plated steel with Nitrile seals. One end ofthe fitting must be connected to a flexible hose. -15°F to 250°F temperature range.NPTF-swivel (NPTF-S) ports will swivel for installation only. Live Swivel Rigid ITEM Port Port PSI Shpg. Price 9-LV1501-4-4 ¼˝ NPTM ¼˝ NPTF-S 3500 1 lb. $73.50 9-LV1501-6-6 ⅜˝ NPTM ⅜˝ NPTF-S 3500 1½ lbs. $110.50 9-LV1501-8-8 ½˝ NPTM ½˝ NPTF-S 3500 2 lbs. $94.80 9-LV1501-12-12 ¾˝ NPTM ¾˝ NPTF-S 3500 2 lbs. $87.95 9-LV2501-4-4 JIC 4M ¼˝ NPTM 3500 1 lb. $93.05 9-LV2501-6-6 JIC 6M ⅜˝ NPTM 3500 1½ lbs. $64.95 9-LV2501-8-8 JIC 8M ½˝ NPTM 3500 2 lbs. $64.95 9-LV2501-12-12 JIC 12M ¾˝ NPTM 3500 2 lbs. $87.95 9-LV5504-4-4 ¼˝ NPTF ¼˝ NPTF 5000 1 lb. $64.95 9-LV5504-6-6 ⅜˝ NPTF ⅜˝ NPTF 5000 1½ lbs. $64.95 9-LV5504-8-8 ½˝ NPTF ½˝ NPTF 5000 2 lbs. $64.95 9-LV5504-12-12 ¾˝ NPTF ¾˝ NPTF 4500 2 lbs. $87.95 9-LV6801-4-4 SAE 4M JIC 4M 3500 1 lb. $57.95 9-LV6801-6-6 SAE 6M JIC 6M 3500 1½ lbs. $64.95 9-LV6801-8-8 SAE 8M JIC 8M 3500 2 lbs. $64.95 9-LV6801-10-10 SAE 10M JIC 10M 3500 2 lbs. $73.95 9-LV6801-12-12 SAE 12M JIC 12M 3500 3 lbs. $87.95 9-LV6901-4-4 SAE 4M ¼˝ NPTF-S 3500 1 lb. $57.95 9-LV6901-6-6 SAE 6M ⅜˝ NPTF-S 3500 1½ lbs. $64.95 9-LV6901-8-8 SAE 8M ½˝ NPTF-S 3500 2 lbs. $64.95 9-LV6901-12-12 SAE 12M ¾˝ NPTF-S 3500 3 lbs. $87.95

Live Swivel Rigid ITEM Port Port PSI Shpg. Price 9-LV5000-4-4 ¼˝ NPTF ¼˝ NPTF 5000 1 lb. $49.95 9-LV5000-6-6 ⅜˝ NPTF ⅜˝ NPTF 5000 1½ lbs. $52.95 9-LV5000-8-8 ½˝ NPTF ½˝ NPTF 5000 2 lbs. $55.95 9-LV5000-12-12 ¾˝ NPTF ¾˝ NPTF 4500 2 lbs. $68.95

90° Elbow

Inline

ThreadIdentification

Guideon page 98

Hex HeadJIC MPlug

ITEM JIC Shpg. Price9-2408-4 4 ⅛ $ .659-2408-6 6 ⅛ $ .759-2408-8 8 ⅛ $ 1.059-2408-10 10 ⅛ $ 2.059-2408-12 12 ¼ $ 1.809-2408-16 16 ½ $ 2.759-2408-20 20 ½ $ 3.10

JIC Mto

JIC M90° Elbow

JIC Mto

NPT FConnector

JIC Fto

JIC MReducer/Expander

A B

JIC NPT ITEM A B Shpg. Price9-2405-4-4 4 ¼˝ ¼ $ 1.159-2405-6-4 6 ¼˝ ¼ $ 1.459-2405-6-6 6 ⅜˝ ¼ $ 1.459-2405-8-6 8 ⅜˝ ¼ $ 2.359-2405-8-8 8 ½˝ ½ $ 2.059-2405-10-8 10 ½˝ ¼ $ 2.409-2405-12-12 12 ¾˝ ¾ $ 2.659-2405-16-16 16 1˝ ¾ $ 4.10

A B

JIC JIC ITEM A B Shpg. Price9-2406-6-4 6 4 ¼ $ 1.459-2406-6-8 6 8 ¼ $ 2.659-2406-8-4 8 4 ¼ $ 1.959-2406-8-6 8 6 ¼ $ 2.109-2406-8-10 8 10 ¼ $ 2.159-2406-8-12 8 12 ½ $ 2.259-2406-10-6 10 6 ½ $ 2.659-2406-10-8 10 8 ½ $ 2.659-2406-10-12 10 12 ½ $ 3.009-2406-12-6 12 6 ½ $ 2.809-2406-12-8 12 8 ½ $ 2.159-2406-12-10 12 10 ½ $ 2.059-2406-12-16 12 16 ¾ $ 3.109-2406-16-8 16 8 ¾ $ 4.459-2406-16-10 16 10 ¾ $ 5.209-2406-16-12 16 12 ¾ $ 3.709-2406-20-16 20 16 ¾ $ 6.25

A

B

JIC JIC ITEM A B Shpg. Price9-2500-4-4 4 4 ¼ $ 1.809-2500-6-4 6 4 ¼ $ 2.859-2500-6-6 6 6 ¼ $ 2.059-2500-8-6 8 6 ¼ $ 3.009-2500-8-8 8 8 ¼ $ 2.159-2500-10-8 10 8 ¼ $ 2.959-2500-10-10 10 10 ¼ $ 2.409-2500-12-8 12 8 ½ $ 4.009-2500-12-12 12 12 ¼ $ 3.659-2500-16-16 16 16 ½ $ 6.05

JIC Mto

JIC MUnion

JIC Mto

NPT MConnector

JIC F Cap

ITEM JIC Shpg. Price9-304-C-4 4 ⅛ $ .559-304-C-6 6 ⅛ $ .709-304-C-8 8 ⅛ $ .909-304-C-10 10 ¼ $ 1.309-304-C-12 12 ¼ $ 1.859-304-C-16 16 ½ $ 2.50

A B

JIC JIC ITEM A B Shpg. Price9-2403-4-4 4 4 ¼ $ .959-2403-6-4 6 4 ¼ $ 1.059-2403-6-6 6 6 ¼ $ 1.159-2403-8-6 8 6 ¼ $ 1.759-2403-8-8 8 8 ½ $ 1.559-2403-10-8 10 8 ½ $ 2.459-2403-10-10 10 10 ½ $ 2.359-2403-12-8 12 8 ½ $ 2.209-2403-12-10 12 10 ½ $ 2.209-2403-12-12 12 12 ¾ $ 3.009-2403-16-12 16 12 ¾ $ 4.759-2403-16-16 16 16 ¾ $ 2.909-2403-20-20 20 20 ¾ $ 4.60

A B

JIC NPT ITEM A B Shpg. Price9-2404-4-4 4 ¼˝ ¼ $ 1.009-2404-4-6 4 ⅜˝ ¼ $ 1.259-2404-6-4 6 ¼˝ ¼ $ 1.259-2404-6-6 6 ⅜˝ ¼ $ 1.209-2404-6-8 6 ½˝ ¼ $ 1.559-2404-8-6 8 ⅜˝ ¼ $ 1.609-2404-8-8 8 ½˝ ½ $ 1.609-2404-8-12 8 ¾˝ ½ $ 2.489-2404-10-8 10 ½˝ ½ $ 1.909-2404-10-12 10 ¾˝ ¾ $ 2.859-2404-12-8 12 ½˝ ¼ $ 2.709-2404-12-12 12 ¾˝ ¾ $ 2.609-2404-12-16 12 1˝ ¾ $ 2.859-2404-16-12 16 ¾˝ ½ $ 2.909-2404-16-16 16 1˝ ¾ $ 2.90

92 Hydraulic Fittings & Adapters www.surpluscenter.com8

JIC Mto

JIC MBulkhead45° Elbow

JIC Mto

NPT FBulkheadConnector

JIC Mto

JIC MBulkheadConnector

JIC Mto

JIC MBulkhead90° Elbow

JIC Mto

SAE MConnector

JIC Mto

NPT M45° Elbow

JIC MUnion Tee

A

B

JIC NPT ITEM A B Shpg. Price9-2503-4-4 4 ¼˝ ¼ $ 1.959-2503-6-4 6 ¼˝ ¼ $ 2.559-2503-6-6 6 ⅜˝ ¼ $ 2.509-2503-6-8 6 ½˝ ¼ $ 2.509-2503-8-6 8 ⅜˝ ¼ $ 2.409-2503-8-8 8 ½˝ ¼ $ 2.409-2503-10-8 10 ½˝ ¼ $ 3.059-2503-12-8 12 ½˝ ¼ $ 3.909-2503-12-12 12 ¾˝ ½ $ 3.659-2503-16-16 16 1˝ ½ $ 6.00

A B

C

JIC JIC JIC ITEM A B C Shpg. Price9-2603-4-4-4 4 4 4 ¼ $ 2.609-2603-6-6-6 6 6 6 ¼ $ 2.809-2603-8-8-8 8 8 8 ¼ $ 2.659-2603-10-10-10 10 10 10 ¼ $ 3.609-2603-12-12-12 12 12 12 ½ $ 5.109-2603-16-16-16 16 16 16 ½ $ 9.50

A B

JIC JIC ITEM A B Shpg. Price9-2700-4-4 4 4 ¼ $ 1.959-2700-6-6 6 6 ¼ $ 1.659-2700-8-8 8 8 ¼ $ 2.259-2700-10-10 10 10 ¼ $ 2.159-2700-12-12 12 12 ½ $ 2.659-2700-16-16 16 16 ½ $ 4.65

A

B JIC JIC ITEM A B Shpg. Price9-2701-4-4 4 4 ¼ $ 2.409-2701-6-6 6 6 ¼ $ 2.059-2701-8-8 8 8 ¼ $ 3.159-2701-10-10 10 10 ¼ $ 4.109-2701-12-12 12 12 ½ $ 6.909-2701-16-16 16 16 ½ $ 7.35

A

B

JIC NPT ITEM A B Shpg. Price9-2705-4-4 4 ¼˝ ¼ $ 2.459-2705-6-4 6 ¼˝ ¼ $ 2.359-2705-6-6 6 ⅜˝ ¼ $ 2.409-2705-8-6 8 ⅜˝ ¼ $ 2.509-2705-8-8 8 ½˝ ¼ $ 3.509-2705-10-8 10 ½˝ ¼ $ 5.309-2705-12-12 12 ¾˝ ½ $ 4.759-2705-16-16 16 1˝ ½ $ 7.50

JIC FBulkheadLock Nut

ITEM JIC Shpg. Price9-306-N-4 4 ⅛ $ .409-306-N-6 6 ⅛ $ .459-306-N-8 8 ⅛ $ .659-306-N-10 10 ¼ $ .909-306-N-12 12 ¼ $ 1.409-306-N-16 16 ¼ $ 1.60

A B

JIC SAE ITEM A B Shpg. Price9-6400-4-3 4 3 ¼ $ 1.509-6400-4-4 4 4 ¼ $ .909-6400-4-5 4 5 ¼ $ .959-6400-4-6 4 6 ¼ $ 1.209-6400-6-6 6 6 ¼ $ 1.059-6400-6-8 6 8 ¼ $ 1.459-6400-6-10 6 10 ¼ $ 2.159-6400-8-6 8 6 ½ $ 1.509-6400-8-8 8 8 ½ $ 1.559-6400-8-10 8 10 ¼ $ 2.359-6400-8-12 8 12 ½ $ 2.809-6400-10-8 10 8 ¼ $ 2.359-6400-10-10 10 10 ½ $ 2.359-6400-10-12 10 12 ½ $ 2.859-6400-12-10 12 10 ¾ $ 2.959-6400-12-12 12 12 ¾ $ 2.859-6400-12-16 12 16 ¾ $ 2.909-6400-16-12 16 12 ½ $ 3.909-6400-16-16 16 16 ¾ $ 2.909-6400-16-20 16 20 ¾ $ 6.259-6400-20-12 20 12 ½ $ 7.809-6400-20-16 20 16 ¾ $ 6.009-6400-20-20 20 20 ¾ $ 6.00

JIC Mto

NPT F90° Elbow

JIC Mto

NPT M90° Elbow

JIC Mto

NPT M90° ElbowExtra Long

A

B

JIC NPT ITEM A B Shpg. Price9-2501-4-4 4 ¼˝ ¼ $ 1.659-2501-4-6 4 ⅜˝ ¼ $ 2.859-2501-4-8 4 ½˝ ¼ $ 2.309-2501-6-4 6 ¼˝ ¼ $ 2.059-2501-6-6 6 ⅜˝ ¼ $ 2.609-2501-6-8 6 ½˝ ¼ $ 3.009-2501-8-6 8 ⅜˝ ¼ $ 2.809-2501-8-8 8 ½˝ ½ $ 3.009-2501-8-12 8 ¾˝ ½ $ 5.159-2501-10-8 10 ½˝ ½ $ 2.409-2501-10-12 10 ¾˝ ¾ $ 3.609-2501-12-8 12 ½˝ ¼ $ 3.709-2501-12-12 12 ¾˝ ¾ $ 3.309-2501-12-16 12 1˝ ½ $ 4.709-2501-16-12 16 ¾˝ ½ $ 4.859-2501-16-16 16 1˝ ¾ $ 4.859-2501-16-20 16 1¼˝ ¾ $10.95

A

B

JIC NPT ITEM A B Shpg. Price9-2501-LL-4-4 4 ¼˝ ¼ $ 2.609-2501-LL-6-6 6 ⅜˝ ¼ $ 3.409-2501-LL-8-8 8 ½˝ ½ $ 6.459-2501-LL-10-8 10 ½˝ ½ $ 6.459-2501-LL-12-12 12 ¾˝ ¾ $ 7.759-2501-LL-16-16 16 1˝ ¾ $13.35

A

B

JIC NPT ITEM A B Shpg. Price9-2502-4-4 4 ¼˝ ¼ $ 2.009-2502-6-4 6 ¼˝ ¼ $ 2.309-2502-6-6 6 ⅜˝ ¼ $ 2.509-2502-6-8 6 ½˝ ¼ $ 3.409-2502-8-6 8 ⅜˝ ¼ $ 3.109-2502-8-8 8 ½˝ ¼ $ 3.409-2502-10-8 10 ½˝ ¼ $ 3.909-2502-12-8 12 ½˝ ½ $ 4.359-2502-12-12 12 ¾˝ ½ $ 5.259-2502-16-12 16 ¾˝ ½ $ 8.959-2502-16-16 16 1˝ ½ $ 8.85

A

B


You can findweld-in tank flanges

on page 85


A B

C

JIC JIC SAE ITEM A B C Shpg. Price9-6803-4-4-4 4 4 4 ½ $ 2.459-6803-6-6-6 6 6 6 ½ $ 2.509-6803-8-8-8 8 8 8 ½ $ 3.459-6803-10-10-10 10 10 10 ¾ $ 5.009-6803-12-12-12 12 12 12 ¾ $ 7.809-6803-16-16-16 16 16 16 1 $ 8.65

JIC Mto

SAE MSwivel Nut90° Elbow

JIC Mto

SAE MSwivel Nut90° ElbowLong

JIC Mto

SAE MSwivel Nut90° ElbowExtra Long

JIC Mto

SAE MSwivel Nut45° Elbow

JIC M / JIC M / SAE MTee

JIC M / JIC F / JIC MSwivel Tee

JIC FtoJIC FUnion

A B


A B

C

JIC JIC JIC ITEM A B C Shpg. Price9-6602-4-4-4 4 4 4 ¼ $ 2.759-6602-6-6-6 6 6 6 ¼ $ 2.659-6602-8-8-8 8 8 8 ¼ $ 3.809-6602-10-10-10 10 10 10 ½ $ 5.059-6602-12-12-12 12 12 12 ½ $ 8.659-6602-16-16-16 16 16 16 ½ $ 9.659-6602-20-20-20 20 20 20 ½ $15.95

A

B

JIC SAE ITEM A B Shpg. Price9-6801-L-4-4 4 4 ¼ $ 2.259-6801-L-6-6 6 6 ¼ $ 2.409-6801-L-8-8 8 8 ½ $ 3.159-6801-L-10-10 10 10 ½ $ 4.759-6801-L-12-12 12 12 ½ $ 5.75

A

B

JIC SAE ITEM A B Shpg. Price9-6801-LL-4-4 4 4 ¼ $ 2.309-6801-LL-6-6 6 6 ¼ $ 2.509-6801-LL-8-8 8 8 ¼ $ 3.459-6801-LL-10-10 10 10 ¼ $ 5.459-6801-LL-12-12 12 12 ½ $ 8.309-6801-LL-16-16 16 16 ½ $ 9.30

A

B JIC SAE ITEM A B Shpg. Price9-6802-4-4 4 4 ¼ $ 2.259-6802-6-6 6 6 ¼ $ 2.659-6802-8-8 8 8 ½ $ 2.659-6802-10-10 10 10 ½ $ 3.359-6802-12-10 12 10 ½ $ 4.509-6802-12-12 12 12 ½ $ 4.609-6802-16-16 16 16 ¾ $ 7.45

JIC F Swivelto

NPT FA B

JIC NPT ITEM A B Shpg. Price9-6506-4-4 4 ¼˝ ¼ $ 2.859-6506-6-4 6 ¼˝ ¼ $ 2.909-6506-6-6 6 ⅜˝ ¼ $ 3.109-6506-6-8 6 ½˝ ¼ $ 3.009-6506-8-6 8 ⅜˝ ¼ $ 2.659-6506-8-8 8 ½˝ ¼ $ 2.759-6506-10-6 10 ⅜˝ ¼ $ 3.459-6506-10-8 10 ½˝ ¼ $ 4.459-6506-10-12 10 ¾˝ ½ $ 5.109-6506-12-8 12 ½˝ ½ $ 7.009-6506-12-12 12 ¾˝ ½ $ 4.409-6506-14-12 14 ¾˝ ¾ $ 9.909-6506-16-16 16 1˝ 1 $ 7.65

JIC Mto

JIC F Swivel90° Elbow

SAE MtoJIC F

Connector

A B

SAE JIC ITEM A B Shpg. Price9-6402-4-4 4 4 ¼ $ 2.259-6402-6-6 6 6 ¼ $ 2.309-6402-8-8 8 8 ½ $ 2.409-6402-10-10 10 10 ½ $ 3.409-6402-12-12 12 12 ¾ $ 4.159-6402-16-16 16 16 ¾ $ 6.40

A

B

JIC JIC ITEM A B Shpg. Price9-6500-4-4 4 4 ¼ $ 2.359-6500-6-6 6 6 ¼ $ 3.009-6500-8-8 8 8 ¼ $ 2.509-6500-10-10 10 10 ¼ $ 3.359-6500-12-12 12 12 ¼ $ 4.709-6500-16-16 16 16 ½ $ 7.75

JIC F Swivelto

NPT M

JIC Fto

NPT M90° Elbow

A

B

JIC NPT ITEM A B Shpg. Price9-6501-4-4 4 ¼˝ ¼ $ 2.109-6501-6-6 6 ⅜˝ ¼ $ 2.609-6501-6-8 6 ½˝ ¼ $ 3.909-6501-8-6 8 ⅜˝ ¼ $ 5.209-6501-8-8 8 ½˝ ¼ $ 3.959-6501-10-8 10 ½˝ ¼ $ 4.259-6501-12-12 12 ¾˝ ¼ $ 4.609-6501-16-16 16 1˝ ½ $ 8.85

A B

JIC NPT ITEM A B Shpg. Price9-6505-4-4 4 ¼˝ ¼ $ 2.359-6505-5-4 5 ¼˝ ¼ $ 2.959-6505-6-4 6 ¼˝ ¼ $ 2.509-6505-6-6 6 ⅜˝ ¼ $ 2.509-6505-8-6 8 ⅜˝ ¼ $ 2.459-6505-8-8 8 ½˝ ¼ $ 2.409-6505-10-8 10 ½˝ ¼ $ 3.159-6505-10-12 10 ¾˝ ¼ $ 4.209-6505-12-8 12 ½˝ ¼ $ 3.859-6505-12-12 12 ¾˝ ½ $ 4.609-6505-16-12 16 ¾˝ ½ $ 8.509-6505-16-16 16 1˝ ½ $ 6.45

A

B JIC SAE ITEM A B Shpg. Price9-6801-4-4 4 4 ¼ $ 1.959-6801-4-6 4 6 ¼ $ 2.259-6801-6-6 6 6 ¼ $ 2.209-6801-6-8 6 8 ¼ $ 2.209-6801-8-6 8 6 ¼ $ 2.409-6801-8-8 8 8 ½ $ 2.109-6801-8-10 8 10 ¼ $ 4.459-6801-8-12 8 12 ½ $ 4.309-6801-10-8 10 8 ¼ $ 3.459-6801-10-10 10 10 ¾ $ 3.459-6801-10-12 10 12 ¾ $ 4.759-6801-12-8 12 8 ½ $ 4.209-6801-12-10 12 10 ¾ $ 4.709-6801-12-12 12 12 ¾ $ 4.459-6801-12-16 12 16 ½ $ 6.309-6801-16-12 16 12 ½ $ 6.409-6801-16-20 16 20 ¾ $16.009-6801-20-16 20 16 ¾ $10.959-6801-20-20 20 20 ¾ $10.95


Guideon page 98

You can findhydraulic hoseon pages 88 - 89

94 Hydraulic Fittings & Adapters www.surpluscenter.com8SAE Mto

NPT F90° Elbow

SAE Mto

NPT M90° Elbow

SAE Mto

JIC F Swivel90° Elbow

SAE Mto

SAE F90° Elbow

SAE Mto

SAE FConnector

SAE Mto

NPT FConnector

A B

SAE NPT ITEM A B Shpg. Price9-6405-4-4 4 ¼˝ ¾ $ 2.199-6405-5-4 5 ¼˝ ¾ $ 6.009-6405-6-4 6 ¼˝ ¾ $ 2.859-6405-6-6 6 ⅜˝ ¾ $ 2.459-6405-6-8 6 ½˝ ¾ $ 2.859-6405-8-4 8 ¼˝ ¾ $ 2.709-6405-8-6 8 ⅜˝ ¾ $ 2.259-6405-8-8 8 ½˝ ¾ $ 2.909-6405-10-8 10 ½˝ ¾ $ 2.259-6405-10-12 10 ¾˝ ¾ $ 5.159-6405-12-8 12 ½˝ ¾ $ 3.809-6405-12-12 12 ¾˝ ¾ $ 4.759-6405-14-12 14 ¾˝ ¾ $ 5.159-6405-16-12 16 ¾˝ ¾ $ 5.259-6405-16-16 16 1˝ ¾ $ 5.959-6405-20-16 20 1˝ ¾ $ 8.259-6405-20-20 20 1¼˝ ¾ $ 9.959-6405-24-24 24 1½˝ ¾ $15.00

A B

SAE SAE ITEM A B Shpg. Price9-6410-4-6 4 6 ¼ $ 1.609-6410-6-4 6 4 ¼ $ 1.709-6410-6-6 6 6 ¼ $ 2.109-6410-6-8 6 8 ¼ $ 2.209-6410-8-4 8 4 ¼ $ 2.159-6410-8-6 8 6 ¼ $ 2.159-6410-8-10 8 10 ¼ $ 2.409-6410-8-12 8 12 ½ $ 4.559-6410-10-4 10 4 ¼ $ 2.559-6410-10-6 10 6 ½ $ 2.159-6410-10-8 10 8 ½ $ 2.809-6410-10-12 10 12 ½ $ 3.659-6410-12-4 12 4 ½ $ 3.709-6410-12-6 12 6 ½ $ 2.659-6410-12-8 12 8 ½ $ 2.459-6410-12-10 12 10 ½ $ 2.509-6410-12-12 12 12 ½ $ 5.109-6410-12-16 12 16 ½ $ 4.509-6410-16-4 16 4 ½ $15.959-6410-16-8 16 8 ½ $ 3.809-6410-16-10 16 10 ½ $ 4.709-6410-16-12 16 12 ¾ $ 5.159-6410-16-20 16 20 1¼ $ 9.709-6410-20-12 20 12 ¾ $ 6.259-6410-20-16 20 16 1 $ 6.759-6410-20-24 20 24 1¾ $13.00

B

A SAE NPT ITEM A B Shpg. Price9-6805-4-4 4 ¼˝ ¼ $ 3.759-6805-6-4 6 ¼˝ ¼ $ 2.709-6805-6-6 6 ⅜˝ ¼ $ 3.809-6805-8-6 8 ⅜˝ ¼ $ 3.309-6805-8-8 8 ½˝ ½ $ 5.009-6805-10-8 10 ½˝ ¼ $ 4.809-6805-12-8 12 ½˝ ½ $ 9.659-6805-12-12 12 ¾˝ ½ $ 7.009-6805-16-12 16 ¾˝ ½ $ 9.909-6805-16-16 16 1˝ ¾ $10.009-6805-20-20 20 1¼˝ ¾ $12.95

B

A SAE NPT ITEM A B Shpg. Price9-6806-4-4 4 ¼˝ ¼ $ 2.309-6806-6-4 6 ¼˝ ¼ $ 2.159-6806-6-6 6 ⅜˝ ¼ $ 3.309-6806-8-6 8 ⅜˝ ¼ $ 3.209-6806-8-8 8 ½˝ ½ $ 5.009-6806-10-8 10 ½˝ ¼ $ 4.209-6806-12-12 12 ¾˝ ½ $ 7.009-6806-16-16 16 1˝ ¾ $ 9.209-6806-20-20 20 1¼˝ ¾ $11.95

B

A SAE JIC ITEM A B Shpg. Price9-6809-4-4 4 4 ¼ $ 2.709-6809-6-6 6 6 ¼ $ 3.159-6809-8-8 8 8 ½ $ 4.509-6809-10-10 10 10 ½ $ 5.309-6809-12-12 12 12 ¾ $ 6.859-6809-16-16 16 16 ¾ $ 9.85

B

A SAE SAE ITEM A B Shpg. Price9-6815-4-4 4 4 ¼ $ 2.659-6815-6-6 6 6 ½ $ 3.109-6815-8-8 8 8 ½ $ 4.709-6815-12-12 12 12 ¾ $15.959-6815-16-16 16 16 ¾ $14.15

JIC M / JIC M / SAE MRun Tee

A C

B

JIC JIC SAE ITEM A B C Shpg. Price9-6804-4-4-4 4 4 4 ½ $ 2.259-6804-6-6-6 6 6 6 ½ $ 2.609-6804-8-8-8 8 8 8 ½ $ 3.209-6804-10-10-10 10 10 10 ½ $ 5.259-6804-12-12-12 12 12 12 ½ $ 9.009-6804-16-16-16 16 16 16 ¾ $ 9.40

Hex HeadSAE MPlug

ITEM SAE Shpg. Price9-6408-4 4 ¼ $ .559-6408-5 5 ¼ $ .709-6408-6 6 ¼ $ .759-6408-8 8 ¼ $ .959-6408-10 10 ¼ $ 1.309-6408-12 12 ¼ $ 2.159-6408-14 14 ¼ $ 2.759-6408-16 16 ¼ $ 2.109-6408-20 20 ¼ $ 3.659-6408-24 24 ¼ $ 5.65

SAE Mto

NPT MConnector

SAE Mto

SAE MConnector

SAE Fto

NPT MConnector

A B

SAE NPT ITEM A B Shpg. Price9-6401-4-4 4 ¼˝ ¼ $ 1.159-6401-6-4 6 ¼˝ ¼ $ 1.709-6401-6-6 6 ⅜˝ ¼ $ 1.659-6401-6-8 6 ½˝ ¼ $ 1.809-6401-8-8 8 ½˝ ½ $ 1.909-6401-10-8 10 ½˝ ½ $ 2.459-6401-12-12 12 ¾˝ ½ $ 2.659-6401-16-16 16 1˝ ¾ $ 4.25

A B

SAE SAE ITEM A B Shpg. Price9-6407-4-4 4 4 ¼ $ 2.159-6407-6-6 6 6 ¼ $ 2.809-6407-8-8 8 8 ¼ $ 4.309-6407-10-10 10 10 ¼ $ 4.109-6407-12-12 12 12 ½ $ 4.009-6407-16-16 16 16 ½ $ 5.40

A B

SAE NPT ITEM A B Shpg. Price9-6404-4-4 4 ¼˝ ¼ $ 2.159-6404-6-6 6 ⅜˝ ¼ $ 2.359-6404-6-8 6 ½˝ ¼ $ 2.659-6404-8-6 8 ⅜˝ ¼ $ 3.009-6404-8-8 8 ½˝ ¼ $ 3.009-6404-10-8 10 ½˝ ¼ $ 2.809-6404-12-8 12 ½˝ ¼ $ 4.609-6404-12-12 12 ¾˝ ¼ $ 4.909-6404-16-12 16 ¾˝ ¼ $ 7.109-6404-16-16 16 1˝ ½ $ 5.15


Guideon page 98


NPT Mto

NPT M90° Elbow

NPT Mto

NPT FConnector

NPT Mto

NPT FBushing

A B

NPT NPT ITEM A B Shpg. Price9-5405-2-2 ⅛˝ ⅛˝ ¼ $ 2.059-5405-2-4 ⅛˝ ¼˝ ¼ $ 1.459-5405-2-6 ⅛˝ ⅜˝ ¼ $ 9.459-5405-2-8 ⅛˝ ½˝ ½ $ 4.209-5405-4-4 ¼˝ ¼˝ ¼ $ 1.559-5405-4-6 ¼˝ ⅜˝ ¼ $ 2.159-5405-4-8 ¼˝ ½˝ ½ $ 2.409-5405-4-12 ¼˝ ¾˝ ¾ $ 7.359-5405-6-6 ⅜˝ ⅜˝ ¼ $ 2.409-5405-6-8 ⅜˝ ½˝ ½ $ 2.559-5405-6-12 ⅜˝ ¾˝ ¾ $ 9.909-5405-8-6 ½˝ ⅜˝ ¼ $ 2.509-5405-8-8 ½˝ ½˝ ½ $ 2.959-5405-8-12 ½˝ ¾˝ ½ $ 3.159-5405-8-16 ½˝ 1˝ ¾ $ 6.209-5405-12-8 ¾˝ ½˝ ½ $ 3.459-5405-12-12 ¾˝ ¾˝ ½ $ 3.459-5405-12-16 ¾˝ 1˝ ¾ $ 5.459-5405-12-20 ¾˝ 1¼˝ 1 $ 8.609-5405-16-16 1˝ 1˝ ¾ $ 6.309-5405-16-20 1˝ 1¼˝ 1 $ 8.459-5405-16-24 1˝ 1½˝ 1½ $15.959-5405-20-20 1¼˝ 1¼˝ 1 $ 9.509-5405-20-24 1¼˝ 1½˝ 1½ $14.559-5405-24-24 1½˝ 1½˝ 1½ $14.959-5405-24-32 1½˝ 2˝ 3 $17.95

A B

NPT NPT ITEM A B Shpg. Price9-5406-4-2 ¼˝ ⅛˝ ¼ $ 1.459-5406-6-2 ⅜˝ ⅛˝ ¼ $ 1.759-5406-6-4 ⅜˝ ¼˝ ¼ $ 1.759-5406-8-4 ½˝ ¼˝ ¼ $ 1.659-5406-8-6 ½˝ ⅜˝ ¼ $ 1.659-5406-12-4 ¾˝ ¼˝ ¼ $ 2.459-5406-12-6 ¾˝ ⅜˝ ¼ $ 2.459-5406-12-8 ¾˝ ½˝ ¼ $ 2.459-5406-16-6 1˝ ⅜˝ ¼ $ 3.359-5406-16-8 1˝ ½˝ ¼ $ 2.309-5406-16-12 1˝ ¾˝ ¼ $ 2.309-5406-20-8 1¼˝ ½˝ ½ $ 6.209-5406-20-12 1¼˝ ¾˝ ½ $ 5.459-5406-20-16 1¼˝ 1˝ ½ $ 4.609-5406-24-12 1½˝ ¾˝ ½ $ 7.759-5406-24-16 1½˝ 1˝ ½ $ 8.609-5406-24-20 1½˝ 1¼˝ ½ $ 6.459-5406-32-20 2˝ 1¼˝ 1 $10.959-5406-32-24 2˝ 1½˝ 1 $10.95

Hex HeadNPT MPlug

ITEM NPT Shpg. Price9-5406-P-2 ⅛˝ ⅛ $ .809-5406-P-4 ¼˝ ⅛ $ .709-5406-P-6 ⅜˝ ¼ $ .959-5406-P-8 ½˝ ¼ $ 1.309-5406-P-12 ¾˝ ½ $ 2.159-5406-P-16 1˝ ½ $ 2.759-5406-P-20 1¼˝ ¾ $ 4.459-5406-P-24 1½˝ 1½ $ 6.709-5406-P-32 2˝ 1½ $13.95

Hollow Hex HeadNPT MPlug

ITEM NPT Shpg. Price9-5406-HP-2 ⅛˝ ⅛ $ .409-5406-HP-4 ¼˝ ⅛ $ .409-5406-HP-6 ⅜˝ ¼ $ .559-5406-HP-8 ½˝ ¼ $ .809-5406-HP-12 ¾˝ ¼ $ 1.309-5406-HP-16 1˝ ½ $ 2.959-5406-HP-20 1¼˝ ½ $ 3.409-5406-HP-24 1½˝ ¾ $ 8.85

NPT FCap

ITEM NPT Shpg. Price9-5406-C-2 ⅛˝ ⅛ $ .809-5406-C-4 ¼˝ ⅛ $ 1.259-5406-C-6 ⅜˝ ⅛ $ 1.359-5406-C-8 ½˝ ¼ $ 2.509-5406-C-12 ¾˝ ¼ $ 2.459-5406-C-16 1˝ ¼ $ 4.60

A

B

NPT NPT ITEM A B Shpg. Price9-5500-4-4 ¼˝ ¼˝ ¼ $ 2.109-5500-6-4 ⅜˝ ¼˝ ¼ $ 2.859-5500-6-6 ⅜˝ ⅜˝ ¼ $ 2.859-5500-8-6 ½˝ ⅜˝ ¼ $ 2.859-5500-8-8 ½˝ ½˝ ¼ $ 2.609-5500-12-8 ¾˝ ½˝ ½ $ 3.909-5500-12-12 ¾˝ ¾˝ ¼ $ 3.959-5500-16-12 1˝ ¾˝ ½ $ 6.309-5500-16-16 1˝ 1˝ ½ $ 7.55

NPT Mto

NPT F90° Street Elbow

B

A

NPT NPT ITEM A B Shpg. Price9-5502-2-2 ⅛˝ ⅛˝ ¼ $ 1.959-5502-4-2 ¼˝ ⅛˝ ¼ $ 2.109-5502-4-4 ¼˝ ¼˝ ¼ $ 2.809-5502-4-6 ¼˝ ⅜˝ ¼ $ 3.359-5502-6-4 ⅜˝ ¼˝ ¼ $ 2.859-5502-6-6 ⅜˝ ⅜˝ ¼ $ 2.759-5502-6-8 ⅜˝ ½˝ ¼ $ 3.259-5502-8-6 ½˝ ⅜˝ ¼ $ 3.009-5502-8-8 ½˝ ½˝ ¼ $ 3.259-5502-8-12 ½˝ ¾˝ ½ $ 6.809-5502-12-8 ¾˝ ½˝ ½ $ 4.909-5502-12-12 ¾˝ ¾˝ ¼ $ 4.459-5502-12-16 ¾˝ 1˝ ½ $15.109-5502-16-12 1˝ ¾˝ ½ $ 8.009-5502-16-16 1˝ 1˝ ½ $ 6.759-5502-16-20 1˝ 1¼˝ ¾ $12.959-5502-20-16 1¼˝ 1˝ ¾ $12.959-5502-20-20 1¼˝ 1¼˝ ¾ $10.95

NPT Fto

NPT FCoupler

NPT Mto

NPT MHex Nipple

SAE BossBuna O-Ring

ITEM SAE Shpg. Price9-90DB-3 #3 ⅛ $ .509-90DB-4 #4 ⅛ $ .559-90DB-5 #5 ⅛ $ .559-90DB-6 #6 ⅛ $ .559-90DB-8 #8 ⅛ $ .709-90DB-10 #10 ⅛ $ .759-90DB-12 #12 ⅛ $ 1.059-90DB-14 #14 ⅛ $ 1.409-90DB-16 #16 ⅛ $ 1.509-90DB-20 #20 ⅛ $ 1.609-90DB-24 #24 ⅛ $ 2.309-90DB-32 #32 ⅛ $ 2.90

A B

NPT NPT ITEM A B Shpg. Price9-5000-2-2 ⅛˝ ⅛˝ ¼ $ 1.359-5000-4-2 ¼˝ ⅛˝ ¼ $ 2.159-5000-4-4 ¼˝ ¼˝ ¼ $ 1.559-5000-6-4 ⅜˝ ¼˝ ¼ $ 2.809-5000-6-6 ⅜˝ ⅜˝ ¼ $ 1.759-5000-8-4 ½˝ ¼˝ ¼ $ 2.759-5000-8-6 ½˝ ⅜˝ ¼ $ 2.659-5000-8-8 ½˝ ½˝ ¼ $ 2.659-5000-12-8 ¾˝ ½˝ ½ $ 3.009-5000-12-12 ¾˝ ¾˝ ¼ $ 2.209-5000-16-12 1˝ ¾˝ ½ $ 4.759-5000-16-16 1˝ 1˝ ¼ $ 4.909-5000-20-20 1¼˝ 1¼˝ ¾ $ 9.55

A B

NPT NPT ITEM A B Shpg. Price9-5404-4-2 ¼˝ ⅛˝ ¼ $ 1.009-5404-4-4 ¼˝ ¼˝ ¼ $ 1.009-5404-6-4 ⅜˝ ¼˝ ¼ $ 1.209-5404-6-6 ⅜˝ ⅜˝ ¼ $ 1.359-5404-8-4 ½˝ ¼˝ ¼ $ 2.059-5404-8-6 ½˝ ⅜˝ ¼ $ 1.759-5404-8-8 ½˝ ½˝ ¼ $ 1.759-5404-12-8 ¾˝ ½˝ ½ $ 3.109-5404-12-12 ¾˝ ¾˝ ¼ $ 2.709-5404-16-12 1˝ ¾˝ ½ $ 2.659-5404-16-16 1˝ 1˝ 1 $ 3.009-5404-20-16 1¼˝ 1˝ ¾ $ 6.159-5404-20-20 1¼˝ 1¼˝ 1 $ 5.80


on page 85


NPT FCross

ITEM NPT Shpg. Price9-5652-2-2-2-2 ⅛˝ ¼ $ 5.659-5652-4-4-4-4 ¼˝ ¼ $ 4.459-5652-6-6-6-6 ⅜˝ ¼ $ 6.309-5652-8-8-8-8 ½˝ ¼ $ 6.509-5652-12-12-12-12 ¾˝ ¼ $ 9.309-5652-16-16-16-16 1˝ ½ $15.50

B

A

NPT NPT ITEM A B Shpg. Price9-1501-L-4-4 ¼˝ ¼˝ ½ $ 3.059-1501-L-6-6 ⅜˝ ⅜˝ ½ $ 6.659-1501-L-8-8 ½˝ ½˝ ½ $ 5.859-1501-L-12-12 ¾˝ ¾˝ ¾ $ 9.10

NPT Fto

NPT F Swivel90° Elbow

NPT Mto

NPT F Swivel90° ElbowLong

NPT Mto


NPT M / NPT F / NPT FTee

NPT F / NPT F / NPT FTee

NPT Mto

NPT FSwivel

NPT F / NPT FSwivel A B

NPT NPT ITEM A B Shpg. Price9-1405-4-4 ¼˝ ¼˝ ½ $ 2.009-1405-6-6 ⅜˝ ⅜˝ ½ $ 2.809-1405-8-8 ½˝ ½˝ ¾ $ 2.509-1405-12-12 ¾˝ ¾˝ ¾ $ 3.959-1405-16-16 1˝ 1˝ 1 $ 6.009-1405-20-20 1¼˝ 1¼˝ 1½ $ 9.95

A B

NPT NPT ITEM A B Shpg. Price9-1404-2-4 ⅛˝ ¼˝ F ¼ $ 2.209-1404-4-4 ¼˝ ¼˝ F ¼ $ 1.859-1404-4-6 ¼˝ ⅜˝ F ¼ $ 2.609-1404-6-4 ⅜˝ ¼˝ F ¼ $ 2.559-1404-6-6 ⅜˝ ⅜˝ F ¼ $ 2.609-1404-6-8 ⅜˝ ½˝ F ¼ $ 2.909-1404-8-6 ½˝ ⅜˝ F ¾ $ 2.909-1404-8-8 ½˝ ½˝ F ¾ $ 2.909-1404-8-12 ½˝ ¾˝ F ¾ $ 4.359-1404-12-8 ¾˝ ½˝ F 1 $ 3.809-1404-12-12 ¾˝ ¾˝ F 1 $ 3.509-1404-12-16 ¾˝ 1˝ F 1 $ 6.259-1404-16-12 1˝ ¾˝ F 1 $ 6.009-1404-16-16 1˝ 1˝ F 1 $ 5.909-1404-20-20 1¼˝ 1¼˝ F 1 $10.00

A B

C

NPT NPT NPT ITEM A B C Shpg. Price9-5605-2-2-2 ⅛˝ ⅛˝ ⅛˝ ¼ $ 2.959-5605-4-4-4 ¼˝ ¼˝ ¼˝ ¼ $ 2.759-5605-6-6-6 ⅜˝ ⅜˝ ⅜˝ ¼ $ 3.259-5605-8-8-8 ½˝ ½˝ ½˝ ¼ $ 4.709-5605-12-12-12 ¾˝ ¾˝ ¾˝ ¼ $ 6.909-5605-16-16-16 1˝ 1˝ 1˝ ½ $ 9.70

A B

C

NPT NPT NPT ITEM A B C Shpg. Price9-5602-4-4-4 ¼˝ ¼˝ ¼˝ ¼ $ 2.459-5602-6-6-6 ⅜˝ ⅜˝ ⅜˝ ¼ $ 4.459-5602-8-8-8 ½˝ ½˝ ½˝ ¼ $ 5.209-5602-12-12-12 ¾˝ ¾˝ ¾˝ ½ $ 9.609-5602-16-16-16 1˝ 1˝ 1˝ ½ $10.95

B

A NPT NPT ITEM A B Shpg. Price9-1502-4-4 ¼˝ ¼˝ ½ $ 2.909-1502-6-6 ⅜˝ ⅜˝ ½ $ 3.459-1502-8-8 ½˝ ½˝ ½ $ 3.909-1502-12-12 ¾˝ ¾˝ ¾ $ 6.409-1502-16-16 1˝ 1˝ 1 $11.509-1502-20-20 1¼˝ 1¼˝ 1¼ $17.95

B

A

NPT NPT ITEM A B Shpg. Price9-1501-2-4 ⅛˝ ¼˝ ¼ $ 2.809-1501-4-4 ¼˝ ¼˝ ½ $ 2.859-1501-4-6 ¼˝ ⅜˝ ¼ $ 2.409-1501-6-4 ⅜˝ ¼˝ ¼ $ 2.509-1501-6-6 ⅜˝ ⅜˝ ½ $ 2.959-1501-6-8 ⅜˝ ½˝ ½ $ 5.059-1501-8-6 ½˝ ⅜˝ ¾ $ 3.309-1501-8-8 ½˝ ½˝ ¾ $ 3.409-1501-8-12 ½˝ ¾˝ 1 $ 6.009-1501-12-8 ¾˝ ½˝ 1 $ 6.209-1501-12-12 ¾˝ ¾˝ 1 $ 6.909-1501-12-16 ¾˝ 1˝ 1 $10.009-1501-16-12 1˝ ¾˝ 1 $10.909-1501-16-16 1˝ 1˝ 1 $ 8.009-1501-16-20 1˝ 1¼˝ 1 $14.009-1501-20-16 1¼˝ 1˝ ¾ $11.959-1501-20-20 1¼˝ 1¼˝ 2 $17.50

NPT Fto

NPT F45° Swivel

NPT Mto


B

A NPT NPT ITEM A B Shpg. Price9-1503-4-4 ¼˝ ¼˝ ¼ $ 2.959-1503-4-6 ¼˝ ⅜˝ ¼ $ 2.509-1503-6-4 ⅜˝ ¼˝ ¼ $ 2.809-1503-6-6 ⅜˝ ⅜˝ ½ $ 3.259-1503-6-8 ⅜˝ ½˝ ¼ $ 4.059-1503-8-6 ½˝ ⅜˝ ¼ $ 5.659-1503-8-8 ½˝ ½˝ ¾ $ 4.059-1503-8-12 ½˝ ¾˝ ½ $ 4.709-1503-12-8 ¾˝ ½˝ ½ $ 5.109-1503-12-12 ¾˝ ¾˝ ¾ $ 6.259-1503-12-16 ¾˝ 1˝ ½ $12.759-1503-16-12 1˝ ¾˝ ½ $ 8.609-1503-16-16 1˝ 1˝ 1 $10.359-1503-20-20 1¼˝ 1¼˝ 1¼ $14.75

B

A NPT NPT ITEM A B Shpg. Price9-1504-4-4 ¼˝ ¼˝ ¼ $ 3.409-1504-6-6 ⅜˝ ⅜˝ ¼ $ 4.109-1504-8-8 ½˝ ½˝ ¼ $ 3.809-1504-12-12 ¾˝ ¾˝ ¼ $ 7.259-1504-16-16 1˝ 1˝ ½ $ 9.159-1504-20-20 1¼˝ 1¼˝ ¾ $13.00

NPT Mto

NPT F45° Street Elbow

NPT Fto

NPT F90° Elbow

NPT Fto

NPT F45° Elbow

B

A

NPT NPT ITEM A B Shpg. Price9-5505-4-4 ¼˝ ¼˝ ¼ $ 2.109-5505-6-6 ⅜˝ ⅜˝ ¼ $ 2.559-5505-8-8 ½˝ ½˝ ¼ $ 4.209-5505-12-12 ¾˝ ¾˝ ¼ $ 5.809-5505-16-16 1˝ 1˝ ½ $ 9.25

B

A

NPT NPT ITEM A B Shpg. Price9-5504-4-4 ¼˝ ¼˝ ¼ $ 2.709-5504-6-6 ⅜˝ ⅜˝ ¼ $ 2.309-5504-8-8 ½˝ ½˝ ¼ $ 3.209-5504-12-12 ¾˝ ¾˝ ¼ $ 4.659-5504-16-16 1˝ 1˝ ½ $ 7.80

B

A

NPT NPT ITEM A B Shpg. Price9-5503-2-2 ⅛˝ ⅛˝ ¼ $ 1.959-5503-4-4 ¼˝ ¼˝ ¼ $ 2.709-5503-6-6 ⅜˝ ⅜˝ ¼ $ 2.659-5503-8-8 ½˝ ½˝ ¼ $ 2.909-5503-12-12 ¾˝ ¾˝ ¼ $ 4.109-5503-16-16 1˝ 1˝ ½ $ 7.25

ThreadIdentification Guide

on page 98


Hosebarb Mto

NPT M45° Elbow300 PSI max.

A

B Hose ID NPT ITEM A B Shpg. Price9-4503-4-4 ¼˝ ¼˝ ¼ $ 2.559-4503-6-6 ⅜˝ ⅜˝ ¼ $ 2.809-4503-8-8 ½˝ ½˝ ¼ $ 2.909-4503-12-12 ¾˝ ¾˝ ½ $ 4.009-4503-16-16 1˝ 1˝ ½ $ 8.509-4503-20-20 1¼˝ 1¼˝ ½ $13.10

Hosebarb Mto

SAE M300 PSI max.

A

B

Hose ID NPT ITEM A B Shpg. Price9-4501-8-6 ½˝ ⅜˝ ¼ $ 4.109-4501-8-8 ½˝ ½˝ ¼ $ 3.159-4501-12-8 ¾˝ ½˝ ¼ $ 4.459-4501-12-12 ¾˝ ¾˝ ½ $ 4.459-4501-16-12 1˝ ¾˝ ½ $ 5.509-4501-16-16 1˝ 1˝ ½ $ 6.30

Hosebarb Mto

NPT M90° Elbow300 PSI max.

Hosebarb Mto

SAE M90° Elbow

SAE Mto


SAE Mto


Hosebarb Mto

NPT M300 PSI max.

NPT F / NPT F / NPT FTee Swivel

SAE Mto

NPT FSwivel

A B

SAE NPT ITEM A B Shpg. Price9-6900-4-4 4 ¼˝ ¼ $ 1.959-6900-5-4 5 ¼˝ ¼ $ 3.909-6900-6-4 6 ¼˝ ¼ $ 2.059-6900-6-6 6 ⅜˝ ¼ $ 2.459-6900-6-8 6 ½˝ ¼ $ 3.999-6900-8-6 8 ⅜˝ ½ $ 2.859-6900-8-8 8 ½˝ ½ $ 2.859-6900-8-12 8 ¾˝ ½ $ 6.009-6900-10-8 10 ½˝ ½ $ 2.259-6900-10-12 10 ¾˝ ½ $ 3.699-6900-12-8 12 ½˝ ¾ $ 3.799-6900-12-12 12 ¾˝ ¾ $ 3.499-6900-12-16 12 1˝ ½ $ 9.159-6900-16-12 16 ¾˝ ½ $ 4.609-6900-16-16 16 1˝ ½ $ 4.009-6900-20-16 20 1˝ ¾ $ 8.109-6900-20-20 20 1¼˝ ¾ $10.30

A B

C

NPT NPT NPT ITEM A B C Shpg. Price9-1603-4-4-4 ¼˝ ¼˝ ¼˝ ¾ $ 5.009-1603-6-6-6 ⅜˝ ⅜˝ ⅜˝ ¾ $ 7.009-1603-8-8-8 ½˝ ½˝ ½˝ 1 $ 8.009-1603-12-12-12 ¾˝ ¾˝ ¾˝ 1¼ $11.759-1603-16-16-16 1˝ 1˝ 1˝ 2 $27.50

A B

Hose ID NPT ITEM A B Shpg. Price9-4404-4-4 ¼˝ ¼˝ M ¼ $ 2.359-4404-6-6 ⅜˝ ⅜˝ M ¼ $ 2.859-4404-8-8 ½˝ ½˝ M ¼ $ 3.059-4404-12-12 ¾˝ ¾˝ M ¼ $ 3.209-4404-16-16 1˝ 1˝ M ¼ $ 5.109-4404-20-20 1¼˝ 1¼˝ M ½ $ 9.259-4404-24-24 1½˝ 1½˝ M ½ $14.60

B

A

SAE NPT ITEM A B Shpg. Price9-6902-4-4 4 ¼˝ ¼ $ 2.609-6902-6-4 6 ¼˝ ¼ $ 3.759-6902-6-6 6 ⅜˝ ½ $ 3.259-6902-8-6 8 ⅜˝ ¾ $ 6.209-6902-8-8 8 ½˝ ¾ $ 5.959-6902-8-12 8 ¾˝ 1 $ 8.059-6902-10-8 10 ½˝ 1 $ 6.959-6902-10-12 10 ¾˝ 1¼ $ 9.009-6902-12-8 12 ½˝ 1¼ $10.009-6902-12-12 12 ¾˝ 1¼ $ 9.00

B

A

SAE NPT ITEM A B Shpg. Price9-6901-4-4 4 ¼˝ ¼ $ 4.359-6901-6-4 6 ¼˝ ½ $ 3.409-6901-6-6 6 ⅜˝ ½ $ 4.809-6901-6-8 6 ½˝ ¼ $ 4.609-6901-8-4 8 ¼˝ ¼ $ 6.059-6901-8-6 8 ⅜˝ ¾ $ 4.459-6901-8-8 8 ½˝ ¾ $ 5.509-6901-8-12 8 ¾˝ 1 $10.009-6901-10-8 10 ½˝ 1 $ 5.509-6901-10-12 10 ¾˝ 1¼ $ 8.559-6901-12-8 12 ½˝ 1¼ $ 7.759-6901-12-12 12 ¾˝ 1¼ $ 8.159-6901-12-16 12 1˝ ½ $ 9.709-6901-16-12 16 ¾˝ ½ $ 9.109-6901-16-16 16 1˝ ½ $ 9.409-6901-20-16 20 1˝ ¾ $15.309-6901-20-20 20 1¼˝ ¾ $14.95

ORFS FCap

ITEM ORFS Shpg. Price9-FF304-C-4 4 ¼ $ 1.309-FF304-C-6 6 ¼ $ 2.509-FF304-C-8 8 ¼ $ 2.409-FF304-C-10 10 ¼ $ 2.959-FF304-C-12 12 ¼ $ 2.459-FF304-C-16 16 ¼ $ 3.65

A

B Hose ID SAE ITEM A B Shpg. Price9-4601-4-4 ¼˝ 4 ¼ $ 2.109-4601-6-6 ⅜˝ 6 ¼ $ 2.309-4601-8-8 ½˝ 8 ½ $ 3.359-4601-12-12 ¾˝ 12 ¾ $ 4.459-4601-16-16 1˝ 16 ¾ $ 8.00

A B

Hose ID SAE ITEM A B Shpg. Price9-4604-4-4 ¼˝ 4 ¼ $ 2.159-4604-6-6 ⅜˝ 6 ¼ $ 2.259-4604-8-8 ½˝ 8 ¼ $ 2.409-4604-10-10 ⅝˝ 10 ¼ $ 3.909-4604-12-8 ¾˝ 8 ¼ $ 3.909-4604-12-12 ¾˝ 12 ¼ $ 3.409-4604-16-12 1˝ 12 ¼ $ 5.109-4604-16-16 1˝ 16 ¼ $ 5.109-4604-20-16 1¼˝ 16 ½ $ 8.309-4604-20-20 1¼˝ 20 ½ $ 8.309-4604-24-20 1½˝ 20 ½ $12.959-4604-24-24 1½˝ 24 ½ $14.95

NPT F / NPT F / NPT FTee Swivel

NPT F / NPT F / NPT MTee Swivel

A B

C

NPT NPT NPT ITEM A B C Shpg. Price9-1602-4-4-4 ¼˝ ¼˝ ¼˝ ¾ $ 6.159-1602-6-6-6 ⅜˝ ⅜˝ ⅜˝ ¾ $ 7.009-1602-8-8-8 ½˝ ½˝ ½˝ 1 $ 7.009-1602-12-12-12 ¾˝ ¾˝ ¾˝ 1¼ $11.009-1602-16-16-16 1˝ 1˝ 1˝ 2 $20.50

A B

C

NPT NPT NPT ITEM A B C Shpg. Price9-1601-4-4-4 ¼˝ ¼˝ ¼˝ ½ $ 5.009-1601-6-6-6 ⅜˝ ⅜˝ ⅜˝ ½ $ 6.009-1601-8-8-8 ½˝ ½˝ ½˝ ¾ $ 7.009-1601-12-12-12 ¾˝ ¾˝ ¾˝ 1 $11.509-1601-16-16-16 1 ̋ 1 ̋ 1˝ 1¼ $15.80

You can findhydraulic hoseon pages 88 - 89


on page 85


Thread Identification Guide

NPT Fittings• Tapered threads,metal-to-metal seal

Fitting Thread Thread O.D. Size Size Male ⅛˝ NPT ⅛-27 13/32˝ ¼˝ NPT ¼-18 35/64˝ ⅜˝ NPT ⅜-18 43/64˝ ½˝ NPT ½-14 27/32˝ ¾˝ NPT ¾-14 11/16˝ 1˝ NPT 1-11½ 15/16˝ 1¼˝ NPT 1¼-11½ 143/64˝ 1½˝ NPT 1½-11½ 129/32˝ 2˝ NPT 2-11½ 2⅜˝

SAE Straight ThreadO-Ring Boss• Straight threads,seals on an O-ring

Fitting Nominal Thread Size Size Size SAE 4 ¼ 7/16-20 SAE 6 ⅜ 9/16-18 SAE 8 ½ ¾-16 SAE 10 ⅝ ⅞-14 SAE 12 ¾ 11/16-12 SAE 14 ⅞ 13/16-12 SAE 16 1 15/16-12 SAE 20 1¼ 1⅝-12 SAE 24 1½ 1⅞-12 SAE 32 2 2½-12

JIC 37° FlareFittings• Straight threads,seals on the cone-shaped face

Fitting Nominal Thread Size Size Size JIC 4 ¼ 7/16-20 JIC 6 ⅜ 9/16-18 JIC 8 ½ ¾-16 JIC 10 ⅝ ⅞-14 JIC 12 ¾ 11/16-12 JIC 14 ⅞ 13/16-12 JIC 16 1 15/16-12 JIC 20 1¼ 1⅝-12 JIC 24 1½ 1⅞-12 JIC 32 2 2½-12

O-Ring Face Seal(ORFS) Fittings• Straight threads, seals on O-ring in flatface of male fitting

Fitting Nominal Threads Size Size Size ORFS 4 ¼ 9/16-18 ORFS 6 ⅜ 11/16-16 ORFS 8 ½ 13/16-16 ORFS 10 ⅝ 1-14 ORFS 12 ¾ 13/16-12 ORFS 16 1 17/16-12

ORFS Mto

NPT M90° Elbow

ORFS Mto

ORFS F90° Swivel Elbow

ORFS Mto

SAE M90° Elbow

JIC Mto

ORFS FSwivel

Connector

JIC Mto

BSPP MConnector

BSPP Mto

NPT FConnector

ORFS Mto

NPT MConnector

ORFS Mto

SAE MConnector

JIC Mto

BSPP M90° Elbow

B

A

ORFS ORFS ITEM A B Shpg. Price9-FF6500-4-4 4 4 ¼ $ 2.109-FF6500-6-6 6 6 ¼ $ 2.709-FF6500-8-8 8 8 ¼ $ 3.409-FF6500-10-10 10 10 ¼ $ 4.809-FF6500-12-12 12 12 ½ $ 7.209-FF6500-16-16 16 16 ½ $ 9.20

A B

ORFS SAE ITEM A B Shpg. Price9-FF6400-4-4 4 4 ¼ $ 1.309-FF6400-6-4 6 4 ¼ $ 1.559-FF6400-6-6 6 6 ¼ $ 1.559-FF6400-6-8 6 8 ¼ $ 2.059-FF6400-8-6 8 6 ¼ $ 1.959-FF6400-8-8 8 8 ¼ $ 2.059-FF6400-10-10 10 10 ¼ $ 2.959-FF6400-12-12 12 12 ½ $ 3.159-FF6400-16-16 16 16 ½ $ 3.90

A

B

ORFS NPT ITEM A B Shpg. Price9-FF2501-4-4 4 ¼˝ M ¼ $ 2.359-FF2501-6-6 6 ⅜˝ M ¼ $ 2.159-FF2501-8-8 8 ½˝ M ¼ $ 2.759-FF2501-10-8 10 ½˝ M ¼ $ 5.309-FF2501-12-12 12 ¾˝ M ½ $ 4.859-FF2501-16-16 16 1˝ M ½ $ 6.60

Hex HeadORFS MPlug

ITEM ORFS Shpg. Price9-FF2408-4 4 ¼ $ .909-FF2408-6 6 ¼ $ 2.009-FF2408-8 8 ¼ $ 1.409-FF2408-10 10 ¼ $ 2.259-FF2408-12 12 ¼ $ 2.559-FF2408-16 16 ¼ $ 2.40

A B

ORFS NPT ITEM A B Shpg. Price9-FF2404-4-4 4 ¼˝ M ¼ $ 1.409-FF2404-6-6 6 ⅜˝ M ¼ $ 2.409-FF2404-8-8 8 ½˝ M ¼ $ 2.409-FF2404-10-8 10 ½˝ M ¼ $ 3.009-FF2404-12-12 12 ¾˝ M ½ $ 2.609-FF2404-16-16 16 1˝ M ½ $ 3.80

A B

BSPP NPT ITEM A B Shpg. Price9-8855-4-4 ¼˝ ¼˝ ¼ $ 5.559-8855-6-6 ⅜˝ ⅜˝ ¼ $ 6.959-8855-8-8 ½˝ ½˝ ½ $ 8.759-8855-12-12 ¾˝ ¾˝ ¾ $ 8.959-8855-16-16 1˝ 1˝ ¾ $15.95

A

B

JIC BSPP ITEM A B Shpg. Price9-3801-4-4 4 ¼˝ ¼ $ 2.959-3801-6-6 6 ⅜˝ ¼ $ 6.459-3801-8-8 8 ½˝ ¼ $ 5.159-3801-12-12 12 ¾˝ ½ $ 8.859-3801-16-16 16 1˝ ½ $15.60

A B

JIC BSPP ITEM A B Shpg. Price9-8800-4-4 4 ¼˝ ¼ $ 2.009-8800-6-6 6 ⅜˝ ¼ $ 3.909-8800-8-8 8 ½˝ ¼ $ 5.309-8800-10-8 10 ½˝ ¼ $ 5.559-8800-12-8 12 ½˝ ½ $ 5.209-8800-12-12 12 ¾˝ ½ $ 7.909-8800-16-16 16 1˝ ½ $ 9.80

A

B

ORFS SAE ITEM A B Shpg. Price9-FF6801-4-4 4 4 ¼ $ 2.559-FF6801-6-4 6 4 ¼ $ 2.709-FF6801-6-6 6 6 ¼ $ 3.409-FF6801-6-8 6 8 ¼ $ 3.009-FF6801-8-6 8 6 ¼ $ 3.009-FF6801-8-8 8 8 ¼ $ 3.359-FF6801-10-10 10 10 ½ $ 5.059-FF6801-12-12 12 12 ½ $ 6.459-FF6801-16-16 16 16 ½ $ 8.90

A B

JIC ORFS ITEM A B Shpg. Price9-FF6504-4-4 4 4 ¼ $ 3.009-FF6504-6-6 6 6 ¼ $ 2.309-FF6504-8-8 8 8 ¼ $ 2.909-FF6504-10-10 10 10 ¼ $ 3.609-FF6504-12-12 12 12 ½ $ 5.40

800-488-3407 Dry Pressure & Compressed Refrigerant Gauges 99&

200 PSIGauge

ITEM 21-1565-H$5.95• New Dynamic Fluid Components CDS-1P-015E. 200 PSI gauge, 3 bolts on 3˝ dia.B.C.SPECIFICATIONS• Measures 0-200 PSI / 0-14 Bar• Graduated 5 PSI / 0.5 Bar • Flange/back mount• Face diam. 2½˝ • ¼˝ NPT connection• White face • Steel housing• Chrome bezel • Shpg. ½ lb.

30 PSI PMGauge

ITEM 21-1634-BA$3.99• New top quality TEL-TRU 2050BC 4B1 -C6FV dry pressure gauge. “U” shapedbracket, 2 studs 1⅜˝ C-C.SPECIFICATIONS• Measures 0-30 PSI / 0-2 Bar• Dry• Graduated 0.5 PSI / 0.05 Bar • Panel mount• Face diam. 2˝ • ¼˝ NPT connection• Bezel diam. 2¼˝ • Steel housing• Stainless steel bezel • Shpg. ½ lb.

220 PSI,2˝ Gauge

ITEM 21-1666$2.99• New top quality pressure gauge.SPECIFICATIONS• Measures 0 to 220 PSI • Dry gauge• Graduated 4 PSI • Back mounting• Face diam. 2˝ • ⅛˝ NPT connection• Bezel diam. 21/16˝ • Steel housing• Black bezel • Shpg. ½ lb.

100 PSI Panel Mount2˝ Gauge

ITEM 21-1634-BB$2.99• New top quality TEL-TRU 2050BC4B 1 -D9FV dry pressure gauge. “U” shapedbracket, 2 studs 1⅜˝ C-C.SPECIFICATIONS• Measures 0-100 PSI / 0-7 Bar • Dry• Graduated 2 PSI / 0.1 Bar • Panel mount• Face diam. 2˝ • ¼˝ NPT connection• Bezel diam. 2¼˝ • Steel housing• Stainless steel bezel • Shpg. ½ lb.400 PSI

2˝ Gauge

ITEM 21-1560$2.99• New Marsh Instruments part numberJ1460M pressure gauge. Black paintedsteel housing.SPECIFICATIONS• Measures 0-400 PSI • ¼˝ NPT lower connection

in 10 PSI increments • 2˝ dia. face• White face/black markings • Shpg. ¼ lb.

30 PSI1½˝ Gauge

ITEM 21-1635-G$2.99• New top quality Winters 415230 Pressuregauge.SPECIFICATIONS • Clear bezel• Range • Dry gauge

0 to 30 PSI / 0 to 210 KPA • Fitting ⅛˝ NPT• Graduations: 1 PSI / 6 KPA • Back mount• 1½˝ face diam. • Plastic housing• 1⅝˝ bezel diam. • Shpg. ¼ lb.

Ammonia & Refrigerant Gauges• New pressure gauges calibrated to display the temperature and corresponding pres-sure of compressed refrigerants or Ammonia. All have white faces. Panel mount gaugesinclude a mounting bracket. All are dry gauges. Shpg. ½ lb.

Case: M = Metal P = Plastic B = Brass S = Steel SS = Stainless Steel Connection indicated L = Lower P = Panel

ITEM Diam. PSI Vac. Compatible Refrigerants & Their Ranges Connect Case Price 21-1583-EL 2˝ 500 30˝ R502: -40 F to 167 F, R22: -40 F to 173 F, R12: -40 F to 218 F JIC 4 L S $5.95 21-1583-BE 2˝ 500 — R502: -40 F to 167 F, R22: -40 F to 173 F, R12: -20 F to 218 F ¼˝ L S $5.95 21-1583-AH 2½˝ 500 R502: -40 to 167 F, R22: -40 to 173 F, R12: -20 to 218 F ⅛˝ L P $5.95 21-1583-AP 2½˝ 500 R502: -40 to 167 F, R22: -40 to 173 F, R12: -20 to 218 F ⅛˝ L S $5.95 21-1637-CF 2½˝ 500 30˝ R410A: -40 to 90 F, R12: 0 to 160 F, R134a: 0 to 150 F, R22: -30 to 120 F ⅛˝ P M $5.95 21-1637-CG 2½˝ 500 30˝ R410A: -40 to 90 F, R12: 0 to 160 F, R134a: 0 to 150 F, R22: -30 to 120 F ⅛˝ L P $5.95 21-1637-CH 2½˝ 800 — R410A: 20 to 150 F, R12: 70 to 200 F, R134a: 60 to 190 F, R22: 30 to 160 F ⅛˝ L P $5.95 21-1637-CI 2½˝ 5.5 MPa — R410A: -10 to 70 C, R12: 20 to 100 C, R134a: 20 to 90 C, R22: 0 to 70 C ⅛˝ P M $5.95 21-1637-CJ 2½˝ 5.5 MPa — R410A: -10 to 70 C, R12: 20 to 100 C, R134a: 20 to 90 C, R22: 0 to 70 C ⅛˝ L P $5.95 21-1637-CK 2½˝ 3.4 MPa -0.1 MPa R410A: -40 to 30 C, R12: -5 to 70 C, R134a: 0 to 65 C, R22: -20 to 45 C ⅛˝ P M $5.95 21-1637-CL 2½˝ 3.4 MPa -0.1 MPa R410A: -40 to 30 C, R12: -5 to 70 C, R134a: 0 to 65 C, R22: -20 to 45 C ⅛˝ L P $5.95

60 PSIGauge

ITEM 21-1716$1.99• New, SUPER PRO pressure gauge.White face with black numbers.SPECIFICATIONS• Range 0-60 • Dry

Graduations 1 PSI • Connection ¼˝ NPT back• Face dia. 2˝ • Plastic case• Bezel dia. 2˝ • Shpg. ½ lb.

½˝ NPT LowerConnection

ITEM BAR Dia. Case Shpg. Price

21-1634-AG 6 4˝ Stainless 3 lbs. $12.9521-1634-AM 25 6˝ Stainless 3 lbs. $19.9521-1634-AL 40 4˝ Stainless 3 lbs. $12.9521-1634-AO 100 6˝ Stainless 3 lbs. $19.95

¼˝ NPT LowerConnection


21-1657-N 6 2½˝ Plastic 1 lb. $5.9521-1657-O 10 2½˝ Plastic 1 lb. $5.9521-1583-AW 22 2½˝ Steel 1 lb. $5.95

¼˝ NPT BackConnection


21-1582-BB 2.5 2˝ Plastic ½ lb. $4.9521-1653-R 6 2˝ Plastic ½ lb. $3.9521-1653-S 10 2˝ Plastic ½ lb. $3.9521-1582-BG 10 2˝ Plastic ½ lb. $4.95

BAR Dry Gauges Special Inventory Reduction Sale$2.99 each!!!

60 PSI,2˝ Gauge

ITEM 21-1769$3.49• New, AMFLO, pressure gauge, top con-nection with adapter for tire valve.SPECIFICATIONS • Face dia. 2˝• Dry • Mount top• Range 0-60 PSI/0-400 kPa • Connection ⅛˝ NPT• Graduations 1 PSI/20 kPa • Case material steel• Gauge type pressure • Shpg. ¾ lb.

100 Dry Pressure Gauges www.surpluscenter.com8

¼˝ NPT FlangeBack Connection

ITEM PSI Dia. Case Shpg. Price

21-1437 30 3½˝ 2 lbs. $7.9921-1720-I 300 2½˝ Steel ½ lb. $5.9921-1565-I 600 2½˝ Steel ½ lb. $5.9521-1565-Z 1500 2½˝ Steel ½ lb. $5.9521-1472 6000 3½˝ 2 lbs. $15.99

¼˝ NPT FlangeLower Connection


21-1640-H 60 4½˝ Stainless 3 lbs. $18.95

¼˝ NPT PanelConnection


21-1636-V 30 2˝ Plastic ½ lb. $3.9521-1583-CO 30 2½˝ Steel ½ lb. $5.9521-1511 30 2½˝ Steel ½ lb. $5.9521-1636-M 300 2˝ Steel ½ lb. $3.9521-1636-N 600 2˝ Plastic ½ lb. $3.9521-1653-E 600 2½˝ Steel ½ lb. $5.9521-1637-I 600 2½˝ Steel ½ lb. $5.95

¼˝ NPT TopConnection


21-1582-AG 30 2˝ Steel ½ lb. $4.95

⅛˝ NPT BackConnection


21-1581-S 30 1½˝ Plastic ½ lb. $3.9521-1718-A 30 1½˝ Steel ½ lb. $3.9921-1719-B 60 2˝ Plastic ½ lb. $4.9921-1702 100 2˝ Steel ½ lb. $1.9921-1729 140 1½˝ Steel ¼ lb. $3.9921-1663-O 1500 1½˝ Steel ½ lb. $3.95

⅛˝ NPT LowerConnection


21-1718-B 60 1½˝ Steel ½ lb. $3.9921-1581-C 60 1½˝ Plastic ½ lb. $3.9521-1663-N 60 1½˝ Steel ½ lb. $3.9521-1583-DD 400 2½˝ Plastic ½ lb. $5.9521-1583-AF 500 2½˝ Plastic ½ lb. $5.95

⅛˝ NPT PanelConnection


21-1475 200 2˝ Steel ½ lb. $1.99

⅛˝ NPT Left SideConnection


21-1635-A 30 1½˝ Plastic ½ lb. $3.95

⅛˝ NPT TopConnection


21-1771 60 2˝ Steel ½ lb. $2.49



21-1767 15 2˝ Plastic ¼ lb. $2.9921-1430 30 2½˝ Steel ½ lb. $4.9521-1795-B 30 2½˝ Stainless ½ lb. $5.9521-1633 60 2˝ Steel ½ lb. $3.9521-1770 60 2˝ Plastic ¼ lb. $2.9921-1720-C 60 2½˝ Steel ½ lb. $5.9921-1795-G 60 2½˝ Stainless ½ lb. $5.9521-1794-H 60 2½˝ Stainless ½ lb. $5.9521-1772 100 2˝ Steel ½ lb. $2.9921-1794-A 100 2½˝ Stainless ½ lb. $5.9521-1795-A 100 2½˝ Stainless ½ lb. $5.9521-1794-I 160 2½˝ Stainless ½ lb. $5.9521-1795-C 160 2½˝ Stainless ½ lb. $5.9521-1795-D 200 2½˝ Stainless ½ lb. $5.9521-1794-J 300 2½˝ Stainless ½ lb. $5.9521-1795-E 300 2½˝ Stainless ½ lb. $5.9521-1794-C 400 2½˝ Stainless ½ lb. $5.9521-1795-F 400 2½˝ Stainless ½ lb. $5.9521-1565-GGG 400 2½˝ Steel ½ lb. $5.9521-1608-BW 500 4½˝ Steel 3 lbs. $18.9521-1637-B 600 2½˝ Plastic ½ lb. $5.9521-1565-HHH 600 2½˝ Steel ½ lb. $5.9521-1583-DC 600 2½˝ Plastic ½ lb. $5.9521-1795-H 600 2½˝ Stainless ½ lb. $5.9521-1794-D 600 2½˝ Stainless ½ lb. $5.9521-1709-F 600 2½˝ Steel ½ lb. $5.9521-1634-AR 800 2½˝ Stainless ½ lb. $5.9521-1634-AS 800 4½˝ Stainless 3 lbs. $15.9521-1709-G 1000 2½˝ Steel ½ lb. $5.9521-1657-B 1000 2½˝ Plastic ½ lb. $5.9521-1795-I 1000 2½˝ Stainless ½ lb. $5.9521-1794-E 1000 2½˝ Stainless ½ lb. $5.9521-1608-DC 1000 4½˝ Steel 3 lbs. $18.9521-1463-A 1000 4½˝ Stainless 3 lbs. $21.9521-1605-AJ 1015 2½˝ Steel ½ lb. $5.9521-1605-DR 1150 2½˝ Steel ½ lb. $5.9521-1663-K 1500 2½˝ Steel ½ lb. $5.9521-1605-EV 1500 2½˝ Steel ½ lb. $5.9521-1709-H 1500 2½˝ Steel ½ lb. $5.9521-1605-AD 1500 2½˝ Steel ½ lb. $5.9521-1149-B 1500 2½˝ Plastic ½ lb. $5.9521-1565-III 1500 2½˝ Steel ½ lb. $5.9521-1463-C 3000 4½˝ Stainless 3 lbs. $22.9521-1773 5000 2½˝ Plastic ¼ lb. $4.9521-1774 5000 4˝ Plastic ¼ lb. $4.95



21-1467-I 30 2˝ Plastic ½ lb. $3.9921-1634-AZ 30 2˝ Plastic ½ lb. $3.9921-1418 30 2˝ Steel ½ lb. $6.9521-1635-N 60 1½˝ Plastic ½ lb. $3.9521-1635-O * 60 1½˝ Plastic ½ lb. $3.9521-1582-G 60 2˝ Plastic ½ lb. $4.9521-1467-J 60 2˝ Plastic ½ lb. $3.9921-1582-AA 60 2˝ Steel ½ lb. $4.9521-1636-P 60 2˝ Plastic ½ lb. $3.9521-1720-D 60 2½˝ Steel ½ lb. $5.9921-1608-DH 60 4½˝ Steel 3 lbs. $18.9521-1395 100 1½˝ Steel ½ lb. $3.9921-1582-AH 103 2˝ Steel ½ lb. $4.9521-1583-Z 300 2½˝ Steel ½ lb. $5.9521-1657-G 300 2½˝ Steel ½ lb. $5.9521-1605-BF 300 2½˝ Steel ½ lb. $5.9521-1637-J 300 2½˝ Steel ½ lb. $5.9521-1583-DQ 400 2½˝ Steel ½ lb. $5.9521-1583-CY 600 2½˝ Plastic ½ lb. $5.9521-1653-A 1000 2½˝ Plastic ½ lb. $5.9521-1565-J 1000 2½˝ Steel ½ lb. $5.9521-1663-J 1000 2½˝ Steel ½ lb. $5.9521-1463-B 1000 4½˝ Stainless 3 lbs. $19.9521-1565-RR 1500 2½˝ Stainless ½ lb. $5.9521-1374 1500 2½˝ Plastic ½ lb. $3.9921-1380 2000 2½˝ Plastic ½ lb. $3.9921-1634-AW 2000 2½˝ Stainless ½ lb. $5.9521-1634-AV 2000 2½˝ Stainless ½ lb. $5.9521-1565-AA 2000 2½˝ Steel ½ lb. $5.9521-1605-AM 2250 2½˝ Steel ½ lb. $5.9521-1392 3000 2˝ Plastic ½ lb. $3.9921-1463-D 3000 4½˝ Stainless 3 lbs. $21.5021-1474 3000 6˝ 4 lbs. $19.99

-30˝ Hg to 30 PSI,4½˝ DryGaugeITEM 21-1735-B$16.95• New BOURDON pressure gauge. Turrettype phenolic case. Surface mount flangepanel mount. Three hole flange mount on5⅜˝ diameter bolt circle.SPECIFICATIONS• Dry • Face dia. 4½˝• Range • Bezel dia. 5⅛˝

-30˝ Hg to 30 PSI • Mount-100 to 200 KPA • Flange panel

• Graduations • Connection ½˝ NPT0.5 PSI / 1˝ Hg. / 5 KPA • Case material phenolic

• Type pressure-vacuum • Shpg. 3 lbs.

Liquid Filled3000 PSI2½˝ Gauge

ITEM 21-1763$11.95• New, WIKA liquid filled pressure gauge.3 hole panel mount on 2⅞˝ diameter boltcircle.SPECIFICATIONS • Face dia. 2½˝• Liquid filled • Panel mount• Range 0 to 3000 PSI • Connection ¼˝ NPT• Graduations 50 PSI • Case material metal• Gauge type pressure • Shpg. ¾ lb.

Glycerin Filled200 PSI,4˝ PressureGaugeITEM 21-1734$23.99• New, HYPRO. Large diameter face foreasy reading. Glycerin filled to dampen vi-brations.SPECIFICATIONS • Face dia. 4˝• Liquid filled • Mount center back• Range 0-200 PSI / 0-14 BAR• Connection ¼˝ NPT• Graduations 2 lbs. • Case stainless steel• Gauge type pressure • Shpg. 1½ lbs.

800-488-3407 Vacuum & Liquid Filled Gauges 101&

Dry Pressure &VacuumGauges• Brand new. 2˝ dial. ¼˝ NPT lower connection.Shpg. ½ lb.

Pressure Gauges $5.05 eachITEM 2140-30 0 to 30 PSIITEM 2140-60 0 to 60 PSIITEM 2140-100 0 to 100 PSIITEM 2140-160 0 to 160 PSIITEM 2140-200 0 to 200 PSIITEM 2140-300 0 to 300 PSI

Vacuum Gauge

ITEM 2141 0 to 30˝ VAC $5.05

15,000 PSI 2½˝ Dia.Liquid FilledPressureGauge

ITEM 21-1764-L$55.65• Brand new, POWER TEAM Model 9040pressure gauge. Liquid filled. Red back-ground at 10,000 to 15,000 PSI range.SPECIFICATIONS • Gauge type pressure• Liquid filled • Face dia. 2½˝• Range 0 to 15,000 PSI • Mount lower

0 to 1034 BAR • Connection ¼˝ NPT• Graduations 500 PSI • Case material steel

20 BAR • Shpg. ½ lb.

⅛˝ NPT Left SideConnection


21-1722 300 2˝ Stainless ½ lb. $4.99

SAE 4 BackConnection


21-1652-A ** 100 2½˝ Steel 1 lb. $12.95



21-1393 250Kg/cm2 2½˝ Plastic 1 lb. $ 8.9521-1528 1500 2½˝ Stainless 1 lb. $11.9521-1652-C * 16 BAR 2½˝ Steel 1 lb. $12.95



21-1572-X 1500 2½˝ Plastic ½ lb. $11.95



21-1700 300 1½˝ Stainless ½ lb. $5.95

** bulkhead type

Glycerin Filled Pressure Gauges• Brand new. Glycerin damps vibrations, protects against surge pressure. Stainless steelcase & bezel. Combination scale reads in both PSI and BAR. Temperature range -40° Fto 180° F. 1/4˝ NPT brass connection. Shpg. 1 lb.

2½˝ Face 2½˝ Face 4˝ FaceLower Connection Back Connection Lower Connection

$11.95 $12.95 $21.95PSI ITEM ITEM ITEM30 21-1246-A 21-1799-A 21-1800-A60 21-1246-B 21-1799-B 21-1800-B100 21-1246-C 21-1799-C 21-1800-C200 21-1246-D 21-1799-D 21-1800-D300 21-1246-E 21-1799-E 21-1800-E400 21-1246-F 21-1799-F 21-1800-F600 21-1246-G 21-1799-G 21-1800-G1000 21-1246-H 21-1799-H 21-1800-H1500 21-1246-I 21-1799-I 21-1800-I2000 21-1246-J 21-1799-J 21-1800-J3000 21-1246-K 21-1799-K 21-1800-K5000 21-1246-L 21-1799-L 21-1800-L6000 21-1246-M 21-1799-M 21-1800-M10,000 21-1246-N 21-1799-N 21-1800-N

Liquid Filled Gauges



21-1637-CP 30˝x400 2½˝ Steel ½ lb. $5.9521-1420 30˝x800 3½˝ ½ lb. $8.95

¼˝ NPT FlangeLower Connection


21-1640-I 30˝x60 4½˝ Stainless 2 lbs. $18.95



21-1605-FC 30˝x400 2½˝ Steel ½ lb. $5.9521-1606-AA 30˝x300 3½˝ Steel 1 lb. $12.9521-1607-CP 30˝x300 4˝ Steel 2 lbs. $15.95

Vacuum & Pressure Gauges• The following dry gauges measure bothvacuum and the pressure indicated.

102 Order Information www.surpluscenter.com8

WeightNot To Zone Zone Zone Zone Zone Zone ZoneExceed 2 3 4 5 6 7 8

2 lbs.4 lbs.6 lbs.8 lbs.10 lbs.12 lbs.14 lbs.16 lbs.18 lbs.20 lbs.22 lbs.24 lbs.26 lbs.28 lbs.30 lbs.32 lbs.34 lbs.36 lbs.38 lbs.40 lbs.42 lbs.44 lbs.46 lbs.48 lbs.50 lbs.52 lbs.54 lbs.56 lbs.58 lbs.60 lbs.62 lbs.64 lbs.66 lbs.68 lbs.70 lbs.

USPS Priority Mail Rates

What Is The Surplus Center?• Our surplus products are usually a one time purchase at prices well belownormal. In addition to our surplus items, we also stock products from majormanufacturers. All of our products fit into these classifications:

• Brand new. New products we buy directly from the manufacturer andkeep in stock.• New. Excess inventory that is new and unused. Quantities of surplusitems are limited; once we sell out we cannot order more.• New take-offs. Removed from UNUSED machinery.• Used. Used products in good working condition.

Order Online• Please visit our website www.surpluscenter.com.Many more items than inthis catalog! Also a great source of additional information, current stock counts,and pictures. Updated daily with new items.

Order By Phone• Call our toll free number 1-800-488-3407 for fast service 24 hours a day, 7days a week from all 50 states plus Canada, Puerto Rico and the Virgin Islands.

Order By Mail• Fill out order blank completely. Check Processing: When you provide a checkas payment, you authorize us to use information from your check to make a one-time electronic fund transfer from your account. Funds may be withdrawn fromyour account as soon as the same day we receive your payment You will not re-ceive your check back, it will be destroyed by us in a secure manner.• Send money order, bank draft, check, or include your Visa, Mastercard, Dis-cover or American Express number and expiration date. For your protection,PLEASE DON’T SEND CURRENCY.

Shipping & Delivery• Please allow 5 - 7 working days for delivery. If an item is out of stock wewill inform you of the expected delay.• All items, unless otherwise noted, are priced F.O.B. Lincoln. You are re-sponsible for shipping costs.• We normally ship by:

• UPS. Most items 150 lbs. and under can be sent using ground, 3rd Day,2nd Day or Next Day service. 3rd Day, 2nd Day and Next Day are guar-anteed services. Rates are listed on the next page.• Priority Mail. Items 70 lbs. and under will be delivered in 2-3 days tomost U.S. addresses. Rates are on this page.• Truck Freight. We use Fedex Freight Co. to ship items that weigh morethan 150 lbs. or are too large to ship using UPS. A residential delivery feewill apply to shipments made to residential or rural areas.• C.O.D. Orders. UPS and USPS Priority Mail only. $12.00 fee per box.• International Orders. Ship via USPS Priority Mail International, DB Schenkeror UPS International services.

Returning Merchandise• If you receive a product from us and are not satisfied or the item is not suit-able for your application, you can return it within 30 Days, as long as the itemhas not been installed or modified and it is in the original manufacturers con-dition. A refund will be issued for the cost of the item only. All returns mustbe shipped back PREPAID with all original parts, manuals and accessories.We do not accept COD shipments.• If a product is defective within the warranty period please contact us im-mediately so we may assist you.• All returns should have a Return Authorization number written on the box.To obtain an authorization and shipping instructions call 1-800-488-3407 oremail [email protected]• Pack the products securely and ship to this address: Surplus Center Returns Dept. 1015 West ‘‘O’’ Street Lincoln, NE 68528

Limited Warranty• Products we regularly stock that are purchased directly from the manufacturer are covered bythat manufacturers warranty.• We warrant all other products, only to the original purchaser, to be free from defects in mate-rials and workmanship for a period of 90 days from date of shipment.• Because we have no assurance of the purposes for which any of the items herein will or maybe used, no warranty is given as to the fitness of the item for any particular purpose. You havethe responsibility for determining the suitability of items herein for your particular use. We shallnot be liable for incidental or consequential damages. NOTE! Warranties do not cover bent hy-draulic cylinder shafts.• We shall, at our option, repair or replace any items deemed by us to be defective under thiswarranty. Items returned by the purchaser for warranty adjustment must be handled as stated inour return policy. Proof of, and date of purchase will be required. Remedies under this warrantyshall be limited to the original purchase price of the claimed defective item. (Some states do notallow limitations on implied warranties, incidental or consequential damages, thus, some of thelimitations or exclusions referred to above may not apply to you.)• In no event shall we be liable for any damages, or warrant any of our products which are madedefective as a result of damage in shipment, user’s abuse, neglect or improper operation.• A copy of the warranty, if any, for an item in this catalog may be obtained, at no charge, uponwritten request addressed to: SURPLUS CENTER Warranty Department 1015 West “O” Street Lincoln, NE 68528

Zone ChartFOR DETERMINING ZONES FROM LINCOLN, NEBRASKATo determine the shipping zone for a particular destination, use the first three digits ofthe ZIP CODE to which the parcel is addressed. Refer to the rate chart for shipping costs.

ZIP CODEPREFIXES ZONE004-005......6010-043......6044 .............7045 .............6046-047......7048-089......6

100-139......6140-147......5148-149......6150-169......5170-199......6

200-214......6215 .............5216-225......6226 .............5227 .............6228-229......5230-239......6240-274......5275-279......6280-282......5283-285......6286-293......5294-295......6296-298......5299 .............6

300-312......5313-315......6316-319......5320-322......6323-325......5326-339......6341-349......6350-374......5375 .............4

ZIP CODEPREFIXES ZONE376-379......5380-384......4385 .............5386-387......4388 .............5389 .............4390-399......5

400-402......4403-418......5420 .............4421-422......5423-424......4425-459......5460-469......4470 .............5471-479......4480-489......5490-491......4492 .............5493-495......4496-497......5498-499......4

500-507......3508 .............2509 .............3510-511......2512-513......3514-516......2520 .............4521-527......3528-559......4560-562......3563-567......4570-575......3576-587......4588-592......5

ZIP CODEPREFIXES ZONE593 .............4594-599......5

600-611......4612 .............3613-622......4623 .............3624-633......4634-635......3636-639......4640-645......2646-648......3649 .............2650-653......3654-655......4656-658......3660-666......2667-668......3669 .............2670-673......3674 .............2675-678......3679 .............4680-689......2690-692......3693 .............4

700-709......5710-712......4713-714......5716-732......4733 .............5734-736......4737 .............3738-739......4740-743......3744-745......4746 .............3

ZIP CODEPREFIXES ZONE747-757......4758-759......5760-764......4765-789......5790-796......4797-799......5

800-812......4813 .............5814 .............4815 .............5816-820......4821 .............5822-828......4829-834......5835-838......6840-853......5854 .............6855-863......5864 .............6865-874......5875-877......4878-880......5881 .............4882-883......5884 .............4885 .............5889-892......6893 .............5894-897......6898 .............5

900-954......6955 .............7956-961......6970-994......6995-999 ......** Call for Alaska rates.

$ 5.95 $ 6.35 $ 7.05 $ 9.00 $ 9.75 $ 10.55 $ 11.557.55 9.00 10.15 14.25 15.65 16.75 18.659.60 10.80 12.10 18.00 20.00 21.55 24.3010.95 12.35 13.60 21.80 24.30 26.75 30.6012.15 12.75 14.35 24.95 28.55 31.80 37.1013.40 13.65 14.70 28.85 33.35 37.95 43.7013.75 14.40 15.10 32.40 37.80 41.70 47.5514.80 15.90 16.80 36.20 41.65 44.95 51.6016.30 17.90 19.80 39.95 46.05 49.65 57.0517.80 19.90 22.80 41.75 48.10 52.55 60.9519.30 21.90 26.30 43.35 50.00 54.70 63.8520.80 24.15 30.30 45.05 51.95 57.15 66.6022.60 27.25 34.95 46.75 53.95 60.05 69.8524.00 28.05 37.05 48.85 55.45 62.85 75.2025.45 28.70 38.90 50.25 57.95 65.75 78.9026.50 29.60 40.20 51.50 59.55 68.60 82.1027.15 31.25 42.20 53.25 62.10 71.50 85.2527.75 32.90 43.35 55.60 65.45 73.90 88.1528.30 34.35 44.55 57.70 69.00 75.75 91.0528.95 35.85 45.70 60.15 71.80 79.45 93.7029.45 37.20 46.75 62.00 74.25 82.20 96.3530.00 38.40 47.75 64.70 77.25 84.25 98.7030.45 39.15 48.60 67.40 78.95 86.10 101.1530.95 39.80 49.50 70.30 80.85 87.90 103.3531.30 40.35 50.25 73.00 83.05 89.95 105.5031.85 40.95 51.05 74.80 85.05 92.60 107.7032.80 41.45 51.75 76.00 86.40 95.50 110.6533.80 41.95 52.30 77.05 87.65 98.35 113.1534.85 42.30 52.95 78.05 88.80 101.20 114.8535.85 42.70 53.75 78.90 89.80 102.45 116.5036.80 43.00 55.40 79.70 90.75 103.50 120.0037.85 43.30 57.10 80.45 91.60 104.50 123.7538.85 43.60 58.80 81.10 92.35 105.35 127.5039.95 43.80 60.60 81.60 93.80 106.15 130.6040.90 43.95 62.30 82.05 96.10 106.85 133.40

800-488-3407 UPS Rates 103&

2016

UP

S R

ates

G

rou

nd

Ser

vice

3r

d D

ay S

elec

t

2n

d D

ay A

ir

Nex

t D

ay A

ir

Zone

s

Zon

es

Zon

es

Zo

nes

W

eigh

t

2

3

4

5

6

7

2

3

4

5

6

7

2

3

4

5

6

7

2

3

4

5

6

7

2 lb

s.$

10.9

1$

11.5

0$

12.1

6$

12.3

5$

12.7

4$

12.9

4$

13.0

0$

15.0

0$

16.1

0$

18.3

0$

21.9

5$

23.5

5$

19.6

1$

20.3

2$

21.0

2$

23.8

2$

29.3

8$

31.9

1$

30.0

8$

42.7

7$

55.4

7$

60.7

3$

66.9

7$

69.6

24

lbs.

11.2

812

.06

13.1

013

.54

13.8

414

.34

15.2

016

.85

17.9

022

.00

27.2

029

.05

20.3

721

.45

23.5

529

.59

37.8

041

.03

35.5

548

.28

67.8

475

.07

80.3

284

.90

6 lb

s.11

.60

12.3

813

.59

14.1

414

.44

15.0

416

.60

19.0

520

.85

25.6

032

.70

34.8

021

.61

22.7

427

.22

35.1

046

.05

49.9

340

.57

52.5

277

.34

87.9

491

.81

98.1

18

lbs.

12.2

212

.84

13.9

414

.59

14.9

915

.72

17.8

021

.65

23.7

528

.75

37.7

041

.90

23.1

226

.47

31.0

041

.14

56.4

160

.24

41.3

556

.75

85.5

799

.96

106.

4710

8.06

10 lb

s.12

.69

13.1

114

.25

15.0

015

.61

17.0

019

.40

23.1

026

.20

31.8

542

.10

47.4

525

.12

29.0

635

.48

46.6

464

.93

71.1

442

.17

57.5

193

.13

104.

7310

8.50

116.

2712

lbs.

13.2

613

.82

14.4

515

.36

16.3

618

.75

21.1

525

.65

28.5

535

.05

47.2

552

.05

27.2

831

.97

38.7

752

.20

74.9

181

.23

48.9

367

.77

108.

5512

6.12

135.

3814

1.47

14 lb

s.13

.76

14.3

714

.71

15.7

717

.68

20.8

922

.65

28.0

530

.80

38.1

051

.90

57.6

530

.19

34.9

942

.49

58.0

884

.19

89.2

650

.32

70.5

111

9.14

134.

7614

2.78

151.

4616

lbs.

13.9

414

.72

14.9

716

.43

18.8

322

.20

23.9

029

.10

32.9

539

.95

56.7

063

.00

31.8

636

.82

46.1

662

.02

92.1

897

.63

52.3

877

.83

128.

7414

7.67

153.

0716

4.03

18 lb

s.14

.15

15.3

415

.58

17.6

020

.30

23.7

824

.90

29.6

535

.20

43.4

560

.75

68.2

533

.70

38.9

349

.61

66.9

310

0.00

107.

0157

.01

80.5

413

3.14

152.

2816

3.24

166.

1020

lbs.

14.3

515

.77

16.0

318

.55

21.4

125

.14

26.1

531

.80

38.0

046

.65

64.8

573

.30

35.9

641

.46

52.7

972

.59

107.

0711

5.48

57.6

381

.21

139.

2515

3.14

163.

9316

8.94

22 lb

s.14

.94

16.5

117

.09

19.5

922

.93

26.8

027

.75

34.6

040

.15

49.4

569

.00

78.4

038

.50

44.8

156

.03

76.9

111

4.24

123.

7462

.57

89.2

715

4.60

170.

6018

1.08

188.

9724

lbs.

15.3

017

.18

17.9

820

.61

24.6

528

.42

29.1

535

.50

42.4

052

.65

73.2

083

.45

40.1

747

.40

59.6

581

.93

122.

3913

2.53

64.4

790

.07

162.

4617

6.82

184.

5419

6.55

26 lb

s.15

.90

17.8

218

.79

21.6

625

.98

30.3

331

.15

37.7

045

.05

55.8

577

.20

89.0

542

.49

49.8

862

.83

87.2

713

0.43

141.

6568

.53

97.3

217

1.90

187.

1719

9.03

209.

8928

lbs.

16.4

318

.67

19.8

323

.00

28.0

532

.27

32.9

039

.80

47.6

058

.95

82.6

594

.70

45.0

252

.79

65.7

492

.28

138.

0914

9.96

70.2

898

.35

180.

6619

4.95

205.

0921

7.56

30 lb

s.16

.85

19.2

020

.82

24.0

529

.17

33.3

534

.25

40.6

050

.35

62.3

087

.60

99.9

546

.91

55.0

669

.79

97.3

614

5.48

157.

6770

.91

98.9

918

5.23

198.

1620

6.17

218.

5432

lbs.

17.1

519

.47

21.1

824

.57

30.2

134

.54

35.5

543

.45

53.0

065

.20

92.2

510

5.50

48.8

657

.97

73.5

110

1.78

152.

9816

5.39

75.4

810

4.02

196.

7721

1.95

225.

1323

3.18

34 lb

s.17

.37

20.2

022

.39

25.9

131

.71

36.2

137

.05

44.9

055

.30

68.3

597

.15

110.

5551

.61

60.4

076

.96

107.

3916

1.61

173.

2178

.77

110.

2520

4.93

223.

2923

5.62

246.

4536

lbs.

17.8

320

.94

23.1

927

.26

33.1

438

.21

39.0

547

.75

58.0

071

.50

101.

9011

5.55

53.3

363

.42

80.0

911

1.60

170.

7318

2.97

83.5

611

2.67

213.

5522

8.42

237.

5425

1.77

38 lb

s.18

.42

21.6

224

.03

28.3

834

.46

39.8

239

.65

48.4

560

.50

74.7

510

6.00

119.

4555

.11

65.2

083

.92

116.

6217

9.63

192.

5284

.44

120.

7022

2.05

238.

9525

4.42

263.

3640

lbs.

18.6

622

.23

24.5

728

.95

35.9

141

.26

41.1

048

.85

62.2

076

.95

110.

7012

4.20

58.0

868

.49

87.2

112

1.47

187.

9920

2.29

87.2

712

1.34

226.

3524

2.53

260.

5126

9.30

42 lb

s.19

.10

23.1

125

.77

30.1

737

.43

43.1

042

.70

53.7

565

.90

81.5

511

4.90

128.

8560

.40

71.6

889

.91

126.

1719

6.19

212.

4992

.25

127.

4923

8.83

259.

2327

5.33

276.

2944

lbs.

19.6

823

.60

26.6

331

.51

38.9

145

.03

44.2

055

.40

68.6

584

.65

119.

2513

4.35

62.5

673

.94

93.2

013

0.43

204.

5521

9.98

96.6

813

6.08

247.

5426

9.30

285.

6929

0.16

46 lb

s.19

.91

23.9

227

.37

32.3

240

.11

46.7

145

.95

56.9

071

.20

87.7

012

4.00

139.

8064

.66

76.4

896

.33

134.

1521

1.68

227.

5910

0.54

141.

7425

6.19

274.

5528

7.95

300.

1048

lbs.

20.0

324

.29

28.0

633

.31

41.1

748

.40

46.1

558

.00

73.2

091

.10

129.

7014

4.70

67.2

079

.71

99.5

713

7.93

219.

5023

4.93

102.

0414

4.08

258.

8228

1.04

290.

8830

0.76

50 lb

s.20

.15

24.4

128

.18

33.6

441

.77

49.3

146

.55

59.0

074

.70

92.9

013

1.75

148.

4069

.41

82.4

110

2.75

142.

5722

6.94

241.

5610

2.84

145.

0025

9.97

282.

2829

2.53

302.

2852

lbs.

20.2

024

.49

28.5

333

.74

41.8

549

.33

49.8

562

.95

77.3

097

.20

139.

4515

5.55

71.1

484

.52

106.

2614

7.96

234.

0725

0.68

114.

0216

3.24

280.

2730

2.08

321.

5733

2.89

54 lb

s.20

.24

24.5

728

.57

34.1

441

.93

49.3

551

.00

65.0

080

.10

100.

3514

3.80

162.

6573

.46

87.4

810

9.33

148.

5823

4.92

259.

8611

5.57

166.

1528

8.92

309.

3432

2.23

340.

0456

lbs.

20.2

724

.81

28.6

335

.02

42.0

149

.38

52.3

066

.45

82.3

510

3.60

146.

2516

8.45

75.8

890

.02

110.

6815

2.76

245.

8326

4.92

124.

1217

2.08

298.

2232

3.89

340.

7135

9.20

58 lb

s.20

.67

24.9

728

.92

36.1

442

.17

49.6

653

.10

67.6

084

.70

106.

7015

1.15

174.

8078

.10

92.9

311

5.86

162.

1525

8.45

277.

9812

5.55

180.

7629

8.93

327.

7634

6.21

372.

1260

lbs.

20.9

925

.40

29.6

936

.38

42.8

850

.16

54.3

568

.65

86.4

010

8.25

155.

7017

8.65

79.1

294

.82

119.

8516

6.92

266.

9928

6.44

126.

1918

1.40

300.

3033

5.48

347.

2037

8.21

62 lb

s.21

.65

26.8

129

.91

37.3

843

.50

51.1

655

.55

72.9

589

.65

113.

4016

1.55

186.

5581

.76

97.8

412

1.01

167.

6526

7.95

287.

4813

4.08

190.

2632

5.79

352.

5336

5.84

396.

7564

lbs.

22.0

527

.50

30.6

138

.05

44.4

451

.57

57.3

575

.25

91.4

511

6.45

167.

0019

2.50

82.3

010

0.27

121.

5817

1.38

283.

4330

4.96

141.

0319

9.98

330.

0936

1.77

384.

9040

9.67

66 lb

s.22

.72

28.4

030

.67

38.0

944

.83

51.8

259

.60

76.8

093

.75

119.

6517

1.90

198.

4087

.54

103.

1812

9.13

176.

6628

6.50

313.

8614

2.01

201.

8634

1.32

368.

1539

0.34

416.

6668

lbs.

23.1

329

.12

32.2

838

.28

45.3

852

.34

59.7

578

.00

97.3

512

2.90

176.

3520

4.20

89.3

210

5.99

132.

8817

8.69

290.

5531

6.23

146.

5321

3.95

356.

0637

9.63

407.

4443

5.45

70 lb

s.23

.45

29.1

832

.93

39.6

346

.44

52.7

560

.65

79.3

598

.80

125.

5517

8.55

207.

2592

.07

109.

0613

6.62

187.

0429

5.82

329.

8214

7.17

214.

5936

4.57

386.

9040

8.21

439.

6975

lbs.

26.3

530

.26

34.4

241

.79

49.4

856

.90

66.2

084

.20

106.

1013

3.85

192.

7521

8.40

96.3

311

4.61

140.

7320

1.69

318.

1734

2.77

153.

6222

6.81

374.

7240

3.91

416.

6245

4.80

80 lb

s.30

.54

34.5

237

.43

44.5

552

.42

60.8

869

.90

87.3

011

0.30

139.

2019

8.80

235.

3510

0.49

122.

8214

9.31

215.

5634

5.53

377.

0416

4.22

244.

3339

5.97

452.

4846

4.12

498.

6585

lbs.

34.6

438

.11

41.2

647

.43

55.3

664

.66

72.6

095

.30

116.

9014

9.40

218.

6525

0.65

109.

3312

9.02

159.

2922

9.25

357.

0738

9.64

179.

5725

8.78

423.

5846

1.19

483.

0152

0.17

90 lb

s.39

.85

41.8

345

.01

49.9

058

.30

67.2

677

.00

102.

3512

4.25

157.

0522

7.95

262.

2511

3.54

135.

9316

4.63

230.

8836

7.25

408.

2418

4.87

268.

9446

0.12

497.

8352

2.65

555.

7195

lbs.

44.0

945

.44

48.5

953

.00

61.0

968

.28

81.0

010

5.85

130.

3016

8.75

237.

0027

7.40

117.

2613

9.28

170.

1623

2.23

369.

6742

4.00

196.

0628

4.01

478.

3250

1.33

534.

8057

8.89

100

lbs.

48.7

349

.12

52.7

656

.40

64.1

370

.57

87.0

510

8.80

136.

5517

7.80

252.

8529

4.35

123.

6514

0.65

183.

6526

3.65

424.

6545

0.65

214.

6530

6.65

513.

6555

7.65

575.

6562

0.65

105

lbs.

51.9

252

.29

55.6

359

.61

66.6

473

.03

91.4

011

2.50

144.

8518

6.55

265.

2530

8.85

129.

6514

7.50

192.

6527

6.65

445.

7047

3.00

225.

2032

1.80

539.

1558

5.35

604.

2565

1.50

110

lbs.

55.5

355

.96

58.6

661

.91

69.6

176

.15

95.4

011

7.05

151.

7019

5.20

277.

7032

3.40

135.

6515

4.35

201.

6528

9.65

466.

7549

5.35

235.

7533

6.95

564.

6561

3.05

632.

8568

2.35

115

lbs.

58.4

058

.92

61.7

964

.95

72.4

979

.25

99.7

512

2.20

158.

3520

3.90

290.

2533

7.90

141.

6516

1.20

210.

6530

2.65

487.

8051

7.70

246.

3035

2.10

590.

1564

0.75

661.

4571

3.20

120

lbs.

61.7

262

.58

64.9

067

.52

75.2

882

.17

102.

9512

7.40

165.

1521

2.70

302.

7035

2.45

147.

6516

8.05

219.

6531

5.65

508.

8554

0.05

256.

8536

7.25

615.

6566

8.45

690.

0574

4.05

125

lbs.

64.5

664

.72

68.1

170

.28

78.0

685

.06

107.

5513

2.45

171.

8522

1.25

315.

0536

7.00

153.

6517

4.90

228.

6532

8.65

529.

9056

2.40

267.

4038

2.40

641.

1569

6.15

718.

6577

4.90

130

lbs.

67.6

067

.82

71.9

673

.01

80.7

887

.91

110.

1513

7.60

176.

8523

0.00

327.

5038

1.50

159.

6518

1.75

237.

6534

1.65

550.

9558

4.75

277.

9539

7.55

666.

6572

3.85

747.

2580

5.75

135

lbs.

70.5

371

.43

74.6

075

.83

83.6

090

.78

114.

3514

2.75

181.

9023

7.75

339.

9539

6.05

165.

6518

8.60

246.

6535

4.65

572.

0060

7.10

288.

5041

2.70

692.

1575

1.55

775.

8583

6.60

140

lbs.

73.5

574

.25

78.0

478

.90

86.8

193

.94

118.

4514

7.95

188.

5024

4.20

352.

4541

0.55

171.

6519

5.45

255.

6536

7.65

593.

0562

9.45

299.

0542

7.85

717.

6577

9.25

804.

4586

7.45

145

lbs.

75.9

778

.14

81.9

781

.99

89.8

596

.92

122.

6015

1.85

195.

1525

2.65

364.

9042

5.10

177.

6520

2.30

264.

6538

0.65

614.

1065

1.80

309.

6044

3.00

743.

1580

6.95

833.

0589

8.30

150

lbs.

78.7

480

.81

85.7

987

.19

93.0

910

0.09

126.

6515

6.70

201.

6526

1.35

377.

3543

9.65

183.

6520

9.15

273.

6539

3.65

635.

1567

4.15

320.

1545

8.15

768.

6583

4.65

861.

6592

9.15

104 Order Form www.surpluscenter.com8

e-mail address _____________________________________________________

Your Name ________________________________________________________

Street _____________________________________________________________

City ________________________________ State ______ Zip _______________

Daytime Phone Number _____________________________________________ Area Code / Phone

For shipments to an address other than your own, please fill in below.

Name _____________________________________________________________

Street _____________________________________________________________

City ________________________________ State ______ Zip _______________

SURPLUS CENTER1015 West “O” St. • Lincoln, NE 68528 • FAX 402-474-5198For Fast Order Processing Order Toll Free, 24 Hrs., 7 Days A Week

800-488-3407For Customer Service Call Mon-Fri 8:00 am - 5:00 pm CST

Method of Payment (Please check one)® Check/Money Order ® Visa® payable to Surplus Center ® MasterCard® COD ® Discover ® American Express

Card Number ____________________________________

Expires mo./yr.___________________________________

Signature ________________________________________

Do you have friends that would enjoy our catalog?Tell us where to send it.

Name ______________________________________________________________

Street ______________________________________________________________

City ________________________________ State ________ Zip ______________

Name ______________________________________________________________

Street ______________________________________________________________

City ________________________________ State ________ Zip ______________

Method of ShipmentUPS..................................®UPS 2nd Day....................®UPS Next Day ..................®USPS Priority Mail............®Truck (150 lbs. and over) ..®

DateReceivedAmountReceived

Please don’t write in this space

Qty. Item No. Description Wt. Price Each Total Price

TotalMerchandise $

NE ResidentsAdd Sales Tax $

Shipping Charges $

Total Order $

All prices Are In U.S. DollarsThank You For Your Order!

Privacy with Surplus CenterWe know that you trust us with your personal information, and we take your privacy seriously.Your information is used for internal purposes, such as confirming and tracking your order, in-forming you of new products, services and offers, and providing you with information fromand about Surplus Center. We do not sell, rent or exchange your information.

Thank you for ordering from Surplus Center!Order Toll Free, 24 Hrs., 7 Days A Week

Phone 800-488-3407FAX 402-474-5198Mail this order form to

1015 West “O” Street, Lincoln NE 68528

1˝ NPT PVCBall ValveITEM 20-1639$4.95• New, SH Model DN25 compact ballvalve. PVC construction.SPECIFICATIONS • Temperature 73°• Ports 1˝ NPT female • Size 3⅞˝ x 1⅞˝ x 3½˝• Pressure 150 PSI • Shpg. ½ lb.

¾˝ NPT PVCBall ValveITEM 20-1638$3.95• New, SH compact ball valve. PVC con-struction.SPECIFICATIONS • Temperature 73°• Ports ¾˝ NPT male • Size 2⅞˝ x 1⅜˝ x 2½˝• Pressure 150 PSI • Shpg. ¼ lb.

800-488-3407 Miscellaneous 105&

Rubber Rake Teeth• Brand new, rubber rake teeth by Global Solutions. Heattreated tines with injection molded rubber. Hook stylehead for maximum rubber adhesion. Sold individually orsave money with special pricing on factory box quanti-ties. Refer to our website for specific model and mfg partnumbers. Shpg. 1 lb. on single units.

Sold Individually Factory Box SalesYoke Bolt Tine Tine

ITEM Application Opening Hole Lgth. Diam. Price ITEM Qty. Shpg. Price1-3617 John Deere, many others,universal 1⅝˝ ⅜˝ 10˝ 9/32˝ $2.55 1-3617-100 100 55 lbs. $233.951-3618 New Holland,Allen rakes, Left Hand 155/64˝ ⅜˝ 10˝ 9/32˝ $2.95 1-3618-100 100 59 lbs. $270.951-3619 New Holland,Allen rakes, Right Hand 155/64˝ ⅜˝ 10˝ 9/32˝ $2.95 1-3619-100 100 59 lbs. $270.951-3620 John Deere, Vermeer 1⅝˝ ⅜˝ 10˝ 9/32˝ $3.15 1-3620-100 100 53 lbs. $289.951-3621 John Deere 1⅝˝ ⅜˝ 10˝ 9/32˝ $3.30 1-3621-100 100 55 lbs. $299.951-3622 Farmhand, New Idea,others * ⅜˝ 7˝ 9/32˝ $7.45 1-3622-50 50 50 lbs. $344.951-3623 Vermeer, Massey Ferguson * 1⅜˝ 5/16˝ 7¼˝ ¼˝ $5.45 1-3623-50 50 41 lbs. $249.951-3624 Ford, other windrowers 1⅛˝ 5/16˝ 7½˝ ¼˝ $3.70 1-3624-100 100 29 lbs. $341.951-3625 Heath windrowers 1¼˝ 5/16˝ 8˝ ¼˝ $3.70 1-3625-100 100 29 lbs. $341.95* Double tooth

Drawer Slide Sets

• New, ball bearing drawer slide sets.Use for toolboxes, cabinet drawers,etc. Sold in pairs. Two stage extension(except ITEM 1-2946). Friction detentto hold in closed position. All sectionsare ½˝ wide. ITEM Travel Capacity Retracted Height Mtg type Detachable Shpg. Price 1-2946 11⅛˝ 100 lbs. 17⅝˝ 1⅜˝ Tabs Y 3 lbs. $1.95 1-2689 18˝ 75 lbs. 24˝ 2˝ Holes N 6 lbs. $7.95 1-2690 19˝ 75 lbs. 24˝ 2˝ Holes N 6 lbs. $8.95 1-2734 20½˝ 75 lbs. 19⅞˝ 2˝ Holes Y 6 lbs. $11.95 1-4140 21˝ 68 lbs. 28¾˝ 1.3˝ Holes N 6 lbs. $5.95 1-2907 22˝ 100 lbs. 2111/16˝ 1¾˝ Holes Y 5 lbs. $11.95

Ceramic RingMagnetITEM 1-350919¢• New, ceramic (ferrite) ring magnet.SPECIFICATIONS • Inside diameter ⅜˝• Pull approx. 1 lb. • Thickness 3/16˝• Outside diameter 1¼˝ • Shpg. 1/10 lb.

41 Pitch Nickel PlatedRollerChain

• New, set of four ANSI nickel plated riv-eted 41 pitch roller chain. Slip-fit connectorincluded.ITEM # Links Length Shpg. Price1-4021-45 45 22½˝ 3 lbs. $4.951-4021-59 59 29½˝ 4 lbs. $6.951-4021-71 71 35½˝ 4 lbs. $7.95

Step Category 1 ToCategory 2 LiftArm PinITEM 1-3922 $1.99• New, category 1 to category 2 lift armpin. Category 1 diameter at both ends, cat-egory 2 in between. Plated steel construc-tion.SPECIFICATIONS • Category 2 Section• Category 1 & 2 1⅛˝ diam. x 2¾˝• End 1: ⅞˝ diam. x 37/16˝ • Overall length 8⅜˝• End 2: ⅞˝ diam. x 9/16˝ • Shpg. 1½ lbs.

Category 2Draw Pin• New, category 2 draw pin. Plated steel.Slight corrosion.

ITEM 1-3921-C $2.99SPECIFICATIONS• Category 2 • Thread ⅞-14 x 1⅝˝• Pin diameter 1⅛˝ • Overall length 5⅜˝• Usable length 1½˝ • Shpg. 2 lbs.

ITEM 1-3921-A $2.99SPECIFICATIONS• Category 2 • Thread ⅞-14 x 1⅝˝• Pin diameter 1⅛˝ • Overall length 5⅜˝• Usable length 1¾˝ • Shpg. 2 lbs.

SwingingLetterCase

ITEM 1-3716$39.95

• New, side mount swinging letter case.Steel construction. Originally intended tomount to the side of a workbench. Binsideal for small storage bins. Screws andbolts not included.SPECIFICATIONS• Number of bins 28• 12 small bins 4⅞˝ high x 5⅝˝ wide opening• 16 large bins 5½˝ high x 5⅝˝ wide opening• Bin depth 101/16˝ • Size 42½˝ x 24½˝ x 10⅛˝• Actual weight 135 lbs. • Shpg. 147 lbs. (oversize)

6 ft. HDMICableITEM 11-3463$3.99• New, HDMI cable.SPECIFICATIONS• Length 6 ft. • End 1 HDMI A Male• Shpg. ¼ lb. • End 2 HDMI A Male

8 Zone SprinklerController

ITEM 11-1773 $64.95• New. Great for farms, nurseries, golfcourses, parks, stadiums. Operates up to8 stations with either automatic or manualcontrol. All timing and set-up is done fromthe keyboard. Digital display.• Operates on 115 VAC, station outputs are24 VAC, 30 watts. Use 24 VAC relays on out-puts to control heavier loads. Steel weatherresistant housing with lock. Built-in circuitbreakers and surge/lightning protection.• 3 independent programs with up to 4starts per program. Zones can be set forany or all programs. Timing range from 1min. to 10 hrs. in 1 min. increments. 7 dayrepeat or 6 day skip cycles.• Separate master valve/pump start circuit.Self test program and system test - syringecycle. Battery back-up capability. Size 11˝x 5½˝ x 13˝. Shpg. 18 lbs.

106 Miscellaneous www.surpluscenter.com8

Cable Ties

1-4628 1-4647 1-4725 1-4723 1-4636-15 1-4670

Tensile Max. LoopITEM Qty. Length Width Strength Dia. Color Features/Model Brand Shpg. Price

1-4644 100 4.7˝ 0.1˝ 18 lbs 1.18˝ Natural CT18-1.18Z JST ½ lb. $ .991-4672 100 5.5˝ 0.14˝ 40 lbs. 1.38˝ Natural CT40-1.38Z JST ½ lb. $ .991-4628 1000 5.5˝ 0.1˝ N/A 1.38˝ Natural 954623 — 2 lbs. $5.991-4671 100 7.8˝ 0.1˝ 18 lbs. 2˝ Natural CT18-2.00Z JST ½ lb. $ .991-4642 100 14.5˝ 0.14˝ 40 lbs. 4˝ Natural CT40-4.00Z JST 1 lb. $3.991-4647 50 15.25˝ 0.3˝ N/A 4˝ Black T120RON12K2 Tyton 1 lb. $5.991-4723 100 15.5˝ 0.19˝ N/A 4˝ Green T50L5C2 Tyton 1 lb. $3.991-4724 100 15.5˝ 0.19˝ N/A 4˝ White T50L10C2 Tyton 1 lb. $3.991-4649 50 29.75˝ 0.3˝ N/A 9.4˝ Black T120L010AK2 Tyton 1 lb. $5.991-4695 25 32˝ 0.375˝ N/A 9˝ Ivory T150L-9A Tyton 1 lb. $7.991-4694 25 32˝ 0.31˝ N/A 10˝ Ivory T150L-R-12 Tyton 2 lbs. $5.991-4641 25 32˝ 0.31˝ N/A 11˝ Ivory T150LL-9A Tyton 2 lbs. $5.99

Lashing Ties


1-4636-9 100 9.5˝ 0.51˝ 250 lbs. 2˝ Natural Lashing ties extra heavy LT25-2.00Z JST 2 lbs. $5.991-4636-15 100 15.3˝ 0.51˝ 250 lbs. 4˝ Natural Lashing ties extra heady LT25-4.00Z JST 3 lbs. $4.99

Marker Ties


1-4670 100 7.5˝ 0.19˝ 50 lbs. 1.7˝ Natural 1˝ sq. label area, dual straps, MT50-1.88JZ JST 1 lb. $3.991-4637-10 100 10.6˝ 0.19˝ 50 lbs. 2.7˝ Natural 1˝ sq. label area, dual straps MT50-2.70JZ JST 1 lb. $3.991-4690 100 12.1˝ 0.19˝ 50 lbs. 3˝ Natural 1˝ x 2˝ label area, dual straps, MT50-3.00JZ JST 1 lb. $3.991-4638 100 12.1˝ 0.19˝ 50 lbs. 3˝ Natural ½˝ x 2˝ label area, MT50-3.00Z JST 1 lb. $4.991-4692 100 14.5˝ 0.19˝ 50 lbs. 4˝ Natural 1˝ x 2˝ label area, MT50-4.00Z JST 2 lbs. $3.99

21-1748 21-1751 21-1754 21-175321-1757 21-1760 21-1755

21-1759 21-1752 21-1750

New, Non-resettable DC Voltage Counters

$4.95 each

ITEM VDC Digits Watts Connection Mount Size Shpg.21-1751 12 6 2 Wire leads Base 2.37˝ x 1.496˝ x 2.252˝ ¼ lb.21-1752 12 6 2 Wire leads Base 2.5˝ x 2.25˝ x 1˝ ¼ lb.21-1748 12 7 1.1 Terminal pins Rear 1.68˝ x 1.18˝ x 0.71˝ 1/10 lb.21-1750 12 7 1.1 Wire leads Face & Base 1.775˝ x 1.18˝ x 1.46˝ 1/10 lb.21-1753 12 7 1.1 Wire leads Panel 13/16˝ x 1⅜˝ x 11/16˝ 1/10 lb.21-1759 24 6 1.2 Terminal pins Rear 1.68˝ x 1.18˝ x 0.71˝ 1/10 lb.21-1760 24 6 2 Wire leads Base 2.37˝ x 1.496˝ x 2.252˝ ¼ lb.21-1754 24 7 1.2 Wire leads Face 1¾˝ x 1⅜˝ x 1˝ 1/10 lb.21-1755 24 7 N/A Wire leads Face 1¾˝ x 1⅜˝ x 1˝ 1/10 lb.21-1757 24 7 1.2 Terminal pins Rear 1.68˝ x 1.18˝ x 0.71˝ 1/10 lb.

80 GallonVerticalAir Tank

ITEM 4-1914$349.95• New. vertical steel twin tank with red ex-terior paint. Mount on top pre-drilled andslotted for compressor and motor. Certi-fied by Morganton Pressure Vessels.SPECIFICATIONS• Capacity 80 gallons • Pressure 200 PSI max.• Ports

Two ¼˝ NPT w/ one offset on top and one ctrd. on bottomTwo ½˝ NPT with one centered on top and one on side

• Tank size 24˝ dia. x 39¾˝ (each)• Tank material 14 gauge steel• Mounting plate 25˝ x 9˝• Compressor mounting holes 2 sets

8⅜˝ x 411/16˝ and 8⅜˝ x 5⅛˝• Motor mounting holes 2 sets

8½˝ x 4½˝ and 4⅞˝ x 3˝• Overall size 25˝ x 24˝ x 51¼˝• Shpg. 235 lbs.

Truck freight only.

20 GallonVerticalASME Air Tank

ITEM 4-1915$149.95• New, ASME steel air tank. Has bracketsfor adding axle, wheels and handle (not in-cluded) for portable use. Top platform haspredrilled holes for motor and compressor.SPECIFICATIONS • Ports:• Capacity 20 gallon ½˝ NPT on top• Pressure 150 PSI ¼˝ NPT on each side• Size 22˝ x 16˝ x 32½˝ Inspection 1½˝ each side• Actual weight 87 lbs. • Shpg. 120 lbs.

800-488-3407 Air Compressors & Tanks 107&

6 CFM, Single StageAir Compressor

ITEM 4-1917$179.95

• New, twin cylinder single stage air com-pressor. Cast iron cylinder with aluminumblock and head. Oil level sight glass. Em-bedded air filter.SPECIFICATIONS• One stage, two cylinders • Rotation CCW• Flow • Flywheel 10½˝ A belt• 6 CFM open flow • Port ½˝ OD tube

3.7 CFM at 110 PSI • Bore/Stroke 55mm x 35mm• Pressure 115 PSI max. • Mount 5˝ x 4¼˝• Power reqd. 2 HP max. • Size 11¾˝ x 10½˝ x 11˝• Speed 1030 RPM max. • Shpg. 25 lbs.

7.5 CFM, Single StageAir Compressor

ITEM 4-1916$149.95

• New, V-twin cylinder single stage aircompressor. Cast iron block and cylinderwith aluminum head. Oil level sight glass.SPECIFICATIONS • Rotation CCW• One stage, two cylinders • Flywheel 10½˝ A belt• Flow • Port ½˝ OD tube

7.5 CFM open flow • 1st stage bore/stroke4.28 CFM at 110 PSI 55mm x 45mm

• Pressure 115 PSI max. • Mount 6⅞˝ x 3⅝˝• Power reqd. 2 HP max. • Size 13˝ x 10½˝ x 10½˝• Speed 980 RPM max. • Shpg. 37 lbs.

10.7 CFM, Single StageAir Compressor

ITEM 4-1918$199.95

• New, twin cylinder single stage air com-pressor. Cast iron cylinder with aluminumblock and head. Oil level sight glass. Em-bedded air filter.SPECIFICATIONS• One, two cylinders • Rotation CCW• Flow • Flywheel 10½˝ A belt• 10.7 CFM open flow • Port ½˝ OD tube

6.8 CFM at 110 PSI • Bore/Stroke 65mm x 46mm• Pressure 115 PSI max. • Mount 5˝ x 4¼˝• Power reqd. 3 HP max. • Size 12˝ x 10½˝ x 12˝• Speed 1030 RPM max. • Shpg. 28 lbs.

43.5 CFM, Two Stage AirCompressor

ITEM 4-1920$699.95• New, four cylinder V-twin two stage aircompressor. All cast iron construction. Oillevel sight glass. Automotive style air fil-ters. Safety valves on all coolers.SPECIFICATIONS• Two stage, four cylinders • Flywheel 19˝• Flow two groove B belt

43.5 CFM open flow • Port ⅝˝ ID tube fitting21.6 CFM at 110 PSI • Bore/Stroke

• Pressure 180 PSI max. 105mm-55mm x 89mm• Power reqd. 10 HP max. • Mount 9˝ x 9½˝• Speed 860 RPM max. • Size 18˝ x 27˝ x 19˝• Rotation CCW • Shpg. 270 lbs.

Truck freight only.

36 CFM, Two Stage AirCompressor

ITEM 4-1919$495.95

• New, three cylinder two stage air com-pressor. Cast iron block and cylinder withaluminum head. Oil level sight glass. Auto-motive style air filters.SPECIFICATIONS• Two stage, three cylinders • Rotation CCW• Flow • Flywheel 16½˝

36 CFM open flow two groove B belt30.15 CFM at 40 PSI • Port ¾˝ NPT26.29 CFM at 90 PSI • Bore/Stroke 90mm x 70mm

• Pressure 175 PSI max. • Mount 6½˝ x 11˝• Power reqd. 5 HP max. • Size 16˝ x 23½˝ x 19˝• Speed 820 RPM max. • Shpg. 150 lbs.

Truck freight only.3.7 CFMCompressor

ITEM 4-1905$89.95• New, cast iron single cylinder singlestage belt drive compressor. Oil sightgauge. Foam air filter element.SPECIFICATIONS• One stage, one cylinder • Flywheel 7˝ dia.• Flow 3.7 CFM at 90 PSI Single ½˝ groove• PSI 120 max. • Port 5/16˝ OD tubing• Power reqd. 1.5 HP max. • Mount 5¼˝ x 3⅞˝• RPM 1380 max. • Size 8½˝ x 7˝ x 11˝• Rotation CCW • Shpg. 20 lbs.

4 CFM, SingleStage AirCompressor

ITEM 4-1904$119.95• New. Single stage, single cylinder com-pressor, ideal replacement on portablecompressors. All cast iron cylinder con-struction for long life. Automotive style airfilter, oil sight gauge.SPECIFICATIONS • Rotation CCW• One stage, one cylinder • Flywheel 10½˝ dia. ½˝ belt• Flow 4 CFM at 90 PSI • Port ½˝ 45° flare male• PSI 150 max. • Mount base 4½˝ x 7½˝• Power reqd. 1 HP max. • Size 10˝ x 11˝ x 13˝• RPM 1000 max. • Shpg. 39 lbs.

108 Air Compressors www.surpluscenter.com8

12.9 CFM, Single StageCompressor

ITEM 4-1832$190.95• Brand new, FINI Model MK103. Singlecylinder, single stage belt drive compres-sor. Aluminum head and crankcase. Inte-gral cold start valve allows no load starting.Oil sight gauge.SPECIFICATIONS• One stage, one cylinder • Rotation CCW• Pressure 145 PSI max. • Flywheel 10˝ dia.• Flow at 1370 RPM (3 HP) single ½˝ groove

12.9 CFM open flow • Port ½˝ NPT8 CFM at 145 PSI • Oil capacity ½ qt.

• Flow at 1060 RPM (1½ HP) • Mount 6¼˝ x 4¾˝9.9 CFM open flow • Size 10˝ x 10˝ x 11˝7.2 CFM at 145 PSI • Shpg. 27 lbs.

46 CFM,Four Cylinder

ITEM 4-1070$916.95SPECIFICATIONS• Displ. 46 CFM • Mtg. pattern 9¼˝ x 9½˝• 175 PSI max. • Four cylinder• 35 CFM at 175 PSI • 10 HP• 805 RPM max. • 19˝ pulley 2 groove B belt• Bore/stroke • Cooling fan/pulley

4⅛˝ x 3½˝ 1st stage • Size 20˝ x 29˝ x 28˝2⅛˝ x 3½˝ 2nd stage • Shpg. 315 lbs.

Truck freight only.

Rol-Air Two Stage Air Compressors• Brand new ROL-AIR. Two-stage compressors withaluminum crankcase for light weight and good heatdissipation. Cast iron cylinders for long life andgreater wear resistance. Crankshaft supported onroller bearings with replaceable bearings for connect-ing rods. Reed valves. Deep fins for cooling on outputlines and intercooler. Includes oil sight gauge and au-tomotive style air filter.SPECIFICATIONS FOR ALL TWO STAGE• 175 PSI Max.• CCW Rotation 4-1411 4-1287 4-1751

CFM Port ITEM Model Cylinders HP RPM Open at 175 PSI NPT Pulley Mount Size Shpg. Price4-1287 K24 Two 3 1000 14.58 10.37 ½˝ 15.16˝ dia. 6.41˝ x 8.09˝ 15.18˝ x 12.25˝ x 16.37˝ 64 lbs. $448.95

5 1250 * 18.25 13.14 Two A belts 4-1751 K28 Two 3 800 16.66 13.02 ¾˝ 15.16˝ dia. 6.41˝ x 8.09˝ 16.37˝ x 12.25˝ x 16.62˝ 75 lbs. $463.95

5 1250 * 20.35 15.87 Two A belts 4-1288 K30 Two 5 800 20.52 16.01 ¾˝ 15.16˝ dia. 7.48˝ x 8.97˝ 16.37˝ x 14.18˝ x 22.25˝ 95 lbs. $613.50

7.5 1200 * 30.78 23.63 Two A belts 4-1411 K60 Four 10 800 41.04 33.65 1˝ 21.65˝ dia. 9.6˝ x 11.73˝ 28.94˝ x 17.5˝ x 23.62˝ 255 lbs. $1498.95

15 1100 * 54.58 44.75 Two B belts * Maximum

Rol-Air Single Stage Air Compressors

• Brand new ROL-AIR. Single stage compressors, ideal replacement onportable compressors. Aluminum head and crankcase give good heat dis-sipation while cast iron cylinder sleeves provide long life.SPECIFICATIONS FOR ALL SINGLE STAGE• 150 PSI Max. (140 PSI on ITEM 4-1470)• CCW Rotation 4-1470 4-1410

CFM Port ITEM Model Cylinders HP RPM Open at 150 PSI NPT Pulley Mount Size Shpg. Price4-1470 K3 One 0.5 700 2.16 1.3 ½˝ 10.24˝ dia. 3.74˝ x 4.53˝ 10.25˝ x 9.87˝ x 12.5˝ 17 lbs. $195.00

0.75 1000 * 3.09 1.85 One A belt 4-1410 K17 Two 1 600 7.32 4.98 ½˝ 11.5˝ dia. 5.19˝ x 7.08˝ 11.5˝ x 10.25˝ x 13.75˝ 40 lbs. $313.95

1.5 800 9.07 6.16 One A belt 2 1000 11.33 7.7 3 1100 * 13.42 9.51

4-1473 K35 Two 5 800 * 30.16 22.62 ¾˝ 15.16˝ dia. 7.48˝ x 8.97˝ 15.18˝ x 14.18˝ x 18.5˝ 86 lbs. $598.50 Two A belts

* Maximum

Heavy Duty Two Stage Air Compressors• Brand new. Heavy duty two stage, cast iron compressors designed for heavy duty ap-plications where high air volume and pressure are required along with extra long life. Allcast iron including inner and after coolers to reduce air temperature. Low speed givesquieter operation, less vibration. Complete with oil sight glass, unloader valve and safetypop off valve.

23 CFM,Two Cylinder

ITEM 4-1066$562.50•SPECIFICATIONS• Displ. 23 CFM • Mtg. pattern 8˝ x 9˝• 175 PSI max. • Two cylinder• 17 CFM at 175 PSI • 5 HP• 805 RPM max. • 17˝ pulley 2 groove B belt• Bore/stroke • Cooling fan/pulley

4⅛˝ x 3½˝ 1st stage • Size 17˝ x 19˝ x 21˝2⅛˝ x 3½˝ 2nd stage • Shpg. 250 lbs.

Truck freight only.

115 VAC ThomasCompressor

ITEM 4-1908$49.95• New, THOMAS Model 405-AA38-602 sin-gle cylinder oil-less Wob-L piston compres-sor. Furnished with line cord and plug. Feltfilter on inlet. Thermally protected motor.SPECIFICATIONS • Duty intermittent• Voltage 115 AC • Port ⅛˝ NPT• Amperage 2.8 • Mount two holes on base• Flow 0.32 CFM max. • Size 6⅞˝ x 4˝ x 5¼˝• Pressure 40 PSI max. • Shpg. 7 lbs.• Rated

0.24 CFM at 20 PSI0.32 CFM max.0.2 CFM at 30 PSI0.32 CFM max.

800-488-3407 Air Compressors, Tanks & Accessories 109&

⅛ HP Gast CompressorITEM 4-1854-A$99.99

• New, GAST Model LOA-121-NL singlecylinder oil-less rocking piston air com-pressor. Permanent split capacitor motor.Continuous duty rated.SPECIFICATIONS • Rated• Voltage 115 AC 0.55 CFM at 10 PSI• Amperage 2.1 Amps 0.26 CFM at 50 PSI• Power ⅛ HP • In/Out ports ¼˝ NPT• Flow 0.62 CFM max. • Mount 3 tapped holes base• Pressure 50 PSI max. • Size 8˝ x 3½˝ x 6˝• Speed 1575 RPM • Shpg. 10 lbs.

7.5 CFM, Single StageAir CompressorPump

ITEM 4-1511$129.99• New. Top quality air compressor. Ideal re -place ment for port able compressors.Finned aluminum head and body dissi-pates heat. Has intake air filters and pul-leys with cooling fans for CCW rotation.SPECIFICATIONS • 2½ HP for full output• Model MK11 • 10˝ single A groove pulley• 7.5 CFM displ. • Bore/stroke 2.755˝ x 2.175˝• PSI 125 cont. • Outlet port ½˝ NPT• PSI 140 peak • Foot mtg. 8˝ x 4½˝• 4.6 CFM at 100 PSI c/c bolt pattern• RPM 1000 • Size 14½˝ x 10¾˝ x 10˝• One cylinder • Shpg. 25 lbs.

115 VAC VacuumPump/

CompressorITEM 4-1817$34.99

• New, KNF Neuberger Model N86-9.07compact diaphragm vacuum pump/com-pressor. Teflon coated diaphragm and Vitonvalves. Shaded pole motor w/cooling fan.SPECIFICATIONS • Vacuum 160 mbar max.• Voltage 115 AC • Ports ⅛˝ NPT• Amperage 0.65 Amps • Duty continuous• Air 5.5 LPM open flow • Size 4˝ x 2½˝ x 3½˝• Pressure 36 PSI max. • Shpg. 4 lbs.

100 PSI 2 Gallon AirCompressor

ITEM 4-1893$49.99

• Factory serviced ROCKWORTH ModelFSHHD2NK oil-less air compressor with“hotdog” style tank. Pressure relief valveand tank drain.SPECIFICATIONS • Tank size 2 gallons• Voltage 115 AC • Pressure 100 PSI max• Amperage 1.6 Amps • Port ¼˝ NPT• Pressure switch settings • Mount 4 cushioned feet

On 70 PSI/Off 100 PSI • Size 18½˝ x 6¼˝ x 14˝• Sound level 68 db • Shpg. 24 lbs.

Portable Air Carry Tanks• Brand New IRON HORSE portable aircarry tanks. Ideal for filling tires, blowingoff equipment and other inflation needswhen a compressor isn’t handy. Featuresinclude heavy gauge steel construction,shut-off valve, filling valve, pressure gauge,3 foot hose, tire chuck and built-in carryhandle. Pressure 150 PSI max.

5 Gal. Tank

ITEM 4-1890-5$31.95SPECIFICATIONS• Model IHCT05• Size 17½˝ x 9¾˝ x 11½˝ • Shpg. 20 lbs.10 Gal. Tank

ITEM 4-1890-10$51.10

SPECIFICATIONS• Model IHCT10• Size 22½˝ x 12˝ x 14˝ • Shpg. 34 lbs.

MAXair PremiumAir Compressors

• Brand new, MAXair vertical tank air com-pressor. Features include rugged “V” stylecompressor with cast iron cylinders, highefficiency reed valves, adjustable pressureswitch with ON/OFF control, thermally pro-tected 208/230 VAC motor, premium air fil-ters, extended drains for crankcase oil andtank moisture drain, ball valve control fortank drain and air outlet, liquid filled gauge,oil sight gauge, metal belt guard and twoyear warranty. Assembled in the USA.5 HP, Three Cylinder

ITEM 4-1895$1033.50SPECIFICATIONS• Model C5160V1-MAP• Voltage 208/230 AC• Phase 1• Amperage 22.5/22 Amps• Power 5 HP• Flow 18.5 CFM at 100 PSI• Pressure 170 PSI max• Pressure setting

ON/OFF 125-150 PSI• Outlet port ½˝ NPT• Cylinders 3• Stages 1• Tank capacity 60 gallons• Size 20˝ x 30˝ x 66˝• Shpg. 325 lbs.

Truck freight only.

7.5 HP, Two Cylinder

ITEM 4-1896$2177.50• Includes magneticmotor starter.SPECIFICATIONS• Model C7180V1-MS-MAP• Voltage 208/230 AC• Phase 1• Amperage 33.3/31.3 Amps• Power 7.5 HP• Flow 30 CFM at 100 PSI• Pressure 170 PSI max• Pressure setting

ON/OFF 125-150 PSI• Outlet port ¾˝ NPT• Cylinders 2• Stages 1• Tank capacity 80 gallons• Size 24˝ x 35˝ x 68˝• Shpg. 590 lbs.

Truck freight only.

Water System AutomaticPressure Switches

• Brand new, LEFOO automatic pressureswitch for automatic water systems. Auto-matically turns pump ON or OFF at set val-ues. Adjustable differential. Sturdy plastichousing. Single port.

ITEM 4-1822$13.95SPECIFICATIONS• Contact ratings

1½ HP at 120 VAC • Min. ON (cut-in) 20 PSI2 HP at 230 VAC • Max. OFF (cut-out) 80 PSI3 HP at 240 VAC 3Ph • Differential 15-35 PSI

• Factory setting • Port ¼˝ NPTON (cut-in) 40 PSI • Size 3¾˝ x 2⅝˝ x 3¾˝OFF (cut-out) 60 PSI • Shpg. 1½ lbs.

ITEM 4-1821$13.95SPECIFICATIONS• Contact ratings

1½ HP, 20 amps at 120 VAC2 HP, 12 amps at 240 VAC3 HP, 9.6 amps at 240 VAC 3Ph

• Factory settingON (cut-in) 30 PSI, OFF (cut-out) 50 PSI

• Min. ON (cut-in) 30 PSI • Port ¼˝ NPT• Max. OFF (cut-out) 100 PSI • Size 3½˝ x 2¼˝ x 3⅛˝• Differential 20-35 PSI • Shpg. 1½ lbs.



110 Air Tanks, Valves & Fittings www.surpluscenter.com8

Quick ChangeAir Hose Couplers

• Brand new. Install at one end of hoses toair equipment.• Compressor need not be shut off. Swivelaction helps prevent hose kinking. Changefrom one air tool to another in seconds.Complete UnitITEM 438$4.75• Complete unit (coupler and adapter).Couplers ¼˝ female NPT. Adapter ¼˝ maleNPT. Complete unit ¾˝ x 2½˝. Shpg. 1 lb.Male Adapter OnlyITEM 43983¢

• ¼˝ male NPT adapter only. Shpg. ¼ lb.Female Adapter OnlyITEM 44087¢

• ¼˝ female NPT adapter only. Shpg. ¼ lb.

Adjustable ReliefValve

ITEM 432 $11.95• Brand new. Install on compressed airstorage tanks to provide necessary protec-tion against excessive pressure build-up.Stainless steel ball. Factory set 100 PSI.Adjustable 50-200 PSI. ¼˝ NPT. Size ¾˝ x2⅜˝. Shpg. ½ lb.

In-tank Check Valves• Brand new brass construction. Threads directly into tank port. Auxiliary port for connectionto unloader valve on pressure switch.SPECIFICATIONS FOR ALL• 400 PSI max. • Cracking pressure 4 PSI • Unloader port ⅛˝ NPT • Temp. -250 to 350° F

Tank InletITEM Thread Thread Size Shpg. Price4-1769 ½˝ NPT ½˝ NPT 1˝ hex x 213/16˝ 1 lb. $13.504-1770 ¾˝ NPT ¾˝ NPT 13/16˝ hex x 315/16˝ 1 lb. $18.954-1771 1˝ NPT 1˝ NPT 1½˝ hex x 315/16˝ 1½ lbs. $48.50

¼˝ QuickCoupler

ITEM 20-1431 $4.95• Brand new. Industrial interchange H-stylequick coupler. 300 PSI max. Air flow to 67CFM. Brass body with steel plug and re-lease collar. ¼˝ NPT male at each end.Shpg. 1 lb.

CompressorUnloaderValveITEM 4-1499$39.95• Brand new. Use on compressors drivenby continuous power input (gas engines,hydraulic, etc.). Once tank reaches fullpressure incoming air from compressor isvented to atmosphere. ¼˝ NPT tank con-nection, ¼˝ tubing connection for air line,⅛˝ NPT for idle control or head unloader.Toggle lever to override. Size 3˝ x 3½˝ x1½˝. Shpg. 1 lb.

Mini AirRegulatorw/GaugeITEM 4-1780$5.95• New, Campbell Hausfeld # RE206901AV.Inline air pressure regulator w/gauge.SPECIFICATIONS• Inlet 200 PSI max. • Gauge port ⅛˝ NPT• Outlet range 135 PSI • Size 3⅝˝ x 1½˝ x 2¾˝• Ports ¼˝ NPT • Shpg. ½ lbs.

¼˝ Quick CouplerM/FITEM 4-1799$4.95• New, quick coupler for air circuits. H styleindustrial interchange. Socket is valved,shutting off supply line at disconnect. Plugis unvalved, exhausting downstream line atdisconnect. Install socket on pressure sideof line.SPECIFICATIONS • Airflow 67 CFM• Connections ¼˝ NPT • Size 13/16˝ dia. x 3˝• Pressure 300 PSI • Shpg. 1 lb.

Air Fittings

AA-BB CC-DD EE-FF GG-GA HH-II JJ KK-KA

LW-LL MM-MA NN-NNA PP-QQ RR-SS-TT UU-VV ZD

• Brand new. Brass (except clamps). Givefull description on order (¼˝ Tee = 455-LL).Shpg. ¼ lb. ea.ITEM 455- (AA) Male hose end, ¼˝ hose x ¼˝ NPT ....... $2.00 (BB) Male hose end, ⅜˝ hose x ¼˝ NPT ....... $2.35 (CC) Female NPT, ¼˝ hose x ¼˝ NPT ........... $3.20 (DD) Female NPT, ⅜˝ hose x ¼˝ NPT ........... $2.95 (EE) Hose mender, ¼˝ hose x ¼˝ hose......... $2.05 (FF) Hose mender, ⅜˝ hose x ⅜˝ hose......... $2.10 (GA) Reducer, ¼˝ NPT x ⅛˝ NPT .................. $2.50(GG) Hex nipple, ¼˝ x ¼˝ NPT ...................... $2.05 (HH) Bushing, ⅛˝ female x ¼˝ male NPT ...... $1.70 (II) Bushing, ¼˝ female x ⅜˝ male NPT ...... $2.85 (JJ) Coupling, ¼˝ x ¼˝ female NPT ............. $2.90 (KA) 90° elbow, ⅛˝ NPT ............................... $1.75 (KK) 90° elbow, ¼˝ NPT ............................... $6.05 (LL) Tee, ¼˝ NPT.......................................... $4.70 (LW) Tee, ⅛˝ NPT.......................................... $4.95 (MA) Cross, ⅛˝ NPT...................................... $2.25(MM) Cross, ¼˝ NPT...................................... $9.90 (NN) Filling valve, ⅛˝ NPT............................. $1.15(NNA)Filling valve, ¼˝ NPT............................. $1.75 (PP) Clamp, for standard ¼˝ ID hose........... $0.40(QQ) Clamp, for standard ⅜˝ ID hose........... $0.40 (RR) Compression Coupling

¼˝ NPT x ¼˝ cu. tubing ........................ $2.40 (SS) Compression coupling

¼˝ NPT x 5/16˝ cu. tubing ....................... $3.50 (TT) Compression coupling

¼˝ NPT x ⅜˝ cu. tubing ........................ $2.70 (UU) ⅛˝ Street Elbow.................................... $2.10 (VV) ¼˝ Street Elbow.................................... $3.15

Mobile Air Tanks• Brand new. Steel tank with black powder-coated exterior andrust preventative sprayed inside. D.O.T. approved. Round bodywith mounting brackets on both ends for easy installation. One⅜˝ NPT port in each end, under the mounting bracket.SPECIFICATIONS• 150 PSI max. • Four bolt mount • Two ⅜˝ NPT ports; one ¾˝ NPT port; one ¼˝ NPT port

ITEM Capacity Mount Centers Size Shpg. Price4-1754 6.44 gallon 2¼˝ x 27½˝ ctrs. 9⅝˝ O.D. x 29˝ long 25 lbs. $44.954-1755 12.40 gallon 2¼˝ x 29½˝ ctrs. 12¼˝ O.D. x 31˝ long 40 lbs. $59.95

Air ControlValve

ITEM 4-1668 $126.00• Brand new AIR-MITE Model V-4210-3P.Use for operating single or double actingair cylinders. Anodized aluminum body. Allports blocked in spring centered position.SPECIFICATIONS • Treadle style foot pedal• Ports ¼˝ NPT • Spring centered• PSI 150 • Size 7˝ x 2⅜˝ x 1⅝˝• Three position • Shpg. 2 lbs.

Air ControlValves

4-1542 & 4-1544 4-1543• Brand new AIR-MITE. Use for operatingsingle or double acting air cylinders. An-odized aluminum body. Ports ¼˝ NPT.Rated 150 PSI. Shpg. 2 lbs.

ITEM 4-1542 $96.00• Model V-4203. Two position, lever oper-ated. Manual return. Size 5½˝ x 2˝ x 1⅜˝.

ITEM 4-1544 $126.00• Model V-4204-3P. Three position, leveroperated. Spring return to center. Size 5½˝x 2˝ x 1⅜˝.

ITEM 4-1543 $96.00• Model V-4208. Two position, foot pedal.Spring return. Size 7˝ x 2⅜˝ x 1⅝˝.

800-488-3407 Air Valves, Compressors & Tanks 111&

4 Way 2 PositionAir ValveITEM 20-1423$19.99• New, BOSCH Model0 820 024 126. 24 VDC,4 way 2 position valve for double actingcylinder. Pilot pressure required to shiftvalve. Spring return.SPECIFICATIONS• Voltage 24 DC • In/Cyl./Exhaust ¼˝ NPT• 4 way 2 position, • Pilot port ⅛˝ NPT

spring return • Size 6⅜˝ x 3⅜˝ x 37/16˝• PSI 145 max. • Shpg. 2 lbs.

Air FilterITEM 4-1565$5.99• Used, Donaldson plastichousing air filter. Removedfrom used vacuum pumps.Spin on clear bowl for easyelement checking.SPECIFICATIONS • Outlet ¼˝ NPT• PSI 35 max. • Size 3¾˝ diam. x 6⅛˝• ½˝ hosebarb on inlet port • Shpg. 1 lb.

8 Gallon WheelbarrowAir Tank

ITEM 4-1907 $99.99• New. Wheelbarrow style steel twin tankwith blue powder-coated exterior. Com-plete with 10˝ dia. pneumatic wheel, centermounting channel, two handles with rub-ber grips. Four rubber cushioned feet onbottom. Drain petcocks in each tank.SPECIFICATIONS • Each tank 6˝ dia. x 34˝• Capacity 8 gallons • Tank 14 gauge steel• Pressure 175 PSI max. • Mounting plate 7½˝ x 8¼˝• Ports • Overall size 41˝ x 17˝ x 13˝

Three x ¼˝ NPT • Actual weight 54 lbs.One x ½˝ NPT • Shpg. 87 lbs. (oversize)

10 Gallon WheelbarrowAir Tank

ITEM 4-1906 $139.99• New. Wheelbarrow style steel twin tankwith gray powder-coated exterior. Com-plete with 10˝ dia. pneumatic wheel, com-pressor mounting plate, two handles withrubber grips. Four rubber cushioned feeton bottom. Drain petcocks in each tankSPECIFICATIONS• Capacity 10 gallons • Compressor mtg. holes• Pressure 175 PSI max. 6⅞˝ x 3⅝˝• Ports 8⅜˝ x 4⅝˝

Three x ¼˝ NPT 8⅜˝ x 5½˝One x ½˝ NPT • Motor mounting slots

• Each tank 6˝ dia. x 39¾˝ 3˝ wide for 56 frame motor• Tank 14 gauge steel 3¼˝ wide for gas engine• Mounting plate 28˝ x 9˝ • Overall size 46˝ x 17˝ x 12˝• Actual weight 70 lbs. • Shpg. 87 lbs. (oversize)

24 VDC N.C.Air Valve

ITEM 20-1452$6.95

• New, CLIPPARD Model ET-3. Two position,normally closed air valve. Flow is allowed topass through valve when 24 VDC is applied.Outlet is vented in unenergized state.SPECIFICATIONS• 24 VDC • CFM 0.6 max. at 100 PSI• Watts 0.67 • PSI 100 max.• IN/OUT ports 10-32 • Mount 2 bolt on ½˝ ctrs.

incl. ⅛˝ hosebarb adapters • Size ⅞˝ diam. x 1½˝• Orifice 0.025˝ • Shpg. ¼ lb.

10 Gallon PortableTire

Blaster

ITEM 1-5014 $129.95• Brand new EAGLE Model IHCT10portable tire blaster. Uses a blast of air toseat tire beads onto rims. 2˝ NPT ball valveand special adapter nozzle to control airflow into tire. Features include heavygauge steel construction, shut-off valve,filling valve, pressure gauge, 3 foot hose,tire chuck and built-in cushioned carryhandle. Quick coupler end for attachmentto compressor airline for filling.SPECIFICATIONS• Tank capacity 10 gallon • Size 35˝ x 12¼˝ x 15.8˝• Pressure 150 PSI max. • Shpg. 39 lbs.

115 VACSolenoidValveITEM 4-1923$9.95• New PARKER Model 15-200339-002Esolenoid valve. Normally closed, furnishedwith brass right angle adapters, 7/16-20male 45° flare on inlet and ¼˝ OD tubing onoutlet. Stainless steel body.SPECIFICATIONS • Orifice 1/16˝• Voltage 115 VAC • Ports ⅛˝ NPT• Power consumption 6 Watts • Size 2˝ x 1⅜˝ x 2¼˝• Pressure rating 150 PSI • Shpg. 1 lb.

115 VACSolenoidValveITEM 4-1922$8.95• New PARKER Model 15-200470-001Bsolenoid valve. Normally closed, furnishedwith brass right angle hose barb adapters(¼˝ ID on inlet and ⅛˝ ID on outlet. Stain-less steel body.SPECIFICATIONS • Orifice ⅛˝• Voltage 115 VAC • Ports ⅛˝ NPT• Power consumption 6 Watts • Size 2˝ x 1⅜˝ x 2¼˝• Pressure rating 10 PSI • Shpg. 1 lb.

2 Way Direct Acting,N.C. 120 VACSolenoidWaterValves

• New HAYS Electro-Mite Series. 2 wayN.C. solenoid valve. Regulated outputwhen solenoid energized. Internal strainer.SPECIFICATIONS FOR ALL• Volts 120 VAC • Temperature 140° F max.• PSI 100 max. • Regulated discharge ¼ ̋NPTF• Brass body • Shpg. 2 lbs.

ITEM 20-1485-A $8.95SPECIFICATIONS• GPM 1.25 output • Inlet ports ¼˝ NPT female• Watts 12 • Size 2¾˝ x 2¼˝ x 4⅜˝

ITEM 20-1485-B $7.95SPECIFICATIONS • Watts 14• GPM 0.25 output • Excess flow/pressure• Inlet ports discharge ⅛˝ NPT female¼˝ NPT female & male • Size 2⅝˝ x 2⅜˝ x 4⅜˝

ITEM 20-1485-C $8.95SPECIFICATIONS • Watts 14• GPM 0.4 output • Excess flow/pressure• Inlet ports discharge ⅛˝ NPT F¼˝ NPT female & male • Size 2⅝˝ x 2⅜˝ x 4⅜˝

ITEM 20-1485-E $8.95SPECIFICATIONS • Watts 14• GPM 0.25 output • Excess flow/pressure• Inlet ports discharge ⅛˝ NPT F¼˝ NPT female & male • Size 2½˝ x 2¼˝ x 3¾˝

½˝ BrassBall Valve

ITEM 20-1200$7.99• New WABCO. All brass 3 piece ballvalve. 250 PSI working pressure. ½˝ NPTmale/ female ports. Size 2½˝ x 1¾˝ x 2˝.Shpg. 1 lb.

1200 PSI NeedleValve

ITEM 20-1250$3.99• New R.P.&C. valve. Cast iron needlevalve rated for 1200 PSI. ¼˝ weld in ports.Shpg. 2 lbs.

SAE 6 BrassBall Valve

ITEM 20-1613$6.95• New, PARKER Model XV510P-6 ballvalve. Brass construction. Operate only inthe full open or closed positions.SPECIFICATIONS • Ports SAE 6 M/F• Pressure max. 600 PSI • Size 7˝ x 1˝ x 2½˝• Temperature max. 400° F • Shpg. 1 lb.

AutomaticPressureSwitchITEM 4-9063$9.95• New, CONDOR Model MDR11/11EA au-tomatic pressure switch for compressed airsystems. Automatically turns electric motorON or OFF at set values. Unloader port al-lows compressor to start without back pres-sure load. Plastic housing. Rotary switch forAuto/Off. Integral strain relief for wires.SPECIFICATIONS• Contact rating 26 amps at 120/240 VAC• Factory setting ON (Cut-In) 105 PSI, OFF (Cut-Out) 135 PSI• Ports four ¼˝ NPT• Unloader port ¼˝ OD plastic tubing• Terminals screws with ¼˝ spade adapters• Size 4¼˝ x 2⅝˝ x 4¼˝• Shpg. 1½ lbs.

Air Pressure Switchw/Unloader& OverrideITEM 4-1797$8.99• New HUBBELL ICD Model A12491 airpressure switch. Has unloader connectionto allow motor to start without load. Man-ual lever has automatic and off positions.Bottom mounting manifold has 4 ports forconnecting to tank, relief valve, gauge andhose. Open design requires a protectivecover for safety (not included).SPECIFICATIONS • Amp rating• Manifold block ports 24 amps at 120 VAC

four ¼˝ NPT • Preset (fixed)• Unloader connection On 160 PSI, Off 200 PSI¼˝ OD tubing • Contacts 1 pole

• Size 3½˝ x 3¾˝ x 3½˝ • Shpg. 2 lbs.

112 Pressure Switches & Air Cylinders www.surpluscenter.com8Automatic Pressure Switches

$9.95 each• Brand new, LEFOO automatic pressure switch for compressedair systems. Automatically turns electric motor ON or OFF at setvalues. Adjustable differential. Unloader port ¼˝ OD copper tub-ing which allows compressor to start without back pressure load.Sturdy plastic housing. Manual OFF switch.SPECIFICATIONS• Contact ratings 120 VAC: 1½ HP at 20 amps 32 VDC: ¼ HP at 8.6 amps 240 VAC: 2 HP at 12 amps 120 VDC: ¼ HP at 3.1 amps 240 VAC 3 Ph.: 3 HP at 9.6 amps 240 VDC: ¼ HP at 1.6 amps• Size 3¾˝ x 3⅜˝ x 3¼˝ • Shpg. 1½ lbs.

Factory Setting Min. On Max. OFFITEM ON (Cut-In) OFF (Cut-Out) (Cut-In) (Cut-Out) Differential Ports

4-1819-L1 95 PSI 125 PSI 35 PSI 150 PSI 30-40 PSI ¼˝ NPT (x1)4-1819-L4 95 PSI 125 PSI 35 PSI 150 PSI 30-40 PSI ¼˝ NPT (x4)4-1819-H1 140 PSI 175 PSI 50 PSI 175 PSI 35-55 PSI ¼˝ NPT (x1)4-1819-H4 140 PSI 175 PSI 50 PSI 175 PSI 35-55 PSI ¼˝ NPT (x4)

Metal HousingPressureSwitches

$29.00 each• Brand new, LEFOO automatic pressureswitch for compressed air systems. Auto-matically turns electric motor ON or OFFat set values. Adjustable differential. Un-loader port ¼˝ OD copper tubing which al-lows compressor to start without backpressure load. Sturdy metal housing. Sin-gle port.SPECIFICATIONS FOR BOTH• Contact rating • Min. ON (cut-in) 40 PSI

2 HP, 24 amps at 120 VAC • Differential 25-60 PSI3 HP, 20 amps at 240 VAC • Size 3¾˝ x 3½˝ x 4¼˝

• Port ¼˝ NPT • Shpg. 3 lbs.

Factory Setting ON OFF Max. OFF

ITEM (cut-in) (cut-out) (cut-out)4-1820-H1 145 PSI 175 PSI 250 PSI4-1820-L1 105 PSI 135 PSI 200 PSI

Heavy DutyAutomaticPressureSwitches

• Brand new, SUNNY automatic pressureswitch for compressed air systems. Auto-matically turns electric motor ON or OFFat set values. Adjustable differential. Un-loader port ¼˝ OD copper tubing which al-lows compressor to start without backpressure load. Sturdy plastic housing.Manual off switch.SPECIFICATIONS• Contact ratings • Port(s) ¼˝ NPT

25 amps at 120/240 VAC • Size 3¾˝ x 3˝ x 3⅛˝25 amps at 32/120/230 VDC• Shpg. 1½ lbs.

Factory SettingON OFF

ITEM Port(s) (Cut-In) (Cut-Out) Price4-1823-L1 1 95 PSI 125 PSI $14.504-1823-H1 1 140 PSI 175 PSI $14.504-1823-L4 4 95 PSI 125 PSI $14.604-1823-H4 4 140 PSI 175 PSI $14.60

AutomaticPressure Switches

• New automatic pressure switches.For compressed air of water sys-tems. Automatically switch electricmotor ON or OFF at pre-set values.

ITEM 11-3044-E ITEM 11-3042 ITEM 11-2576

Pressure (PSI)ITEM HP Voltage ON OFF Port Size Shpg Price11-3044-E 1 115/230 20 40 ¼˝ Hosebarb 4˝ x 2¾˝ x 3½˝ 2 lbs. $11.9511-3042 1½ 115 30 50 ¼˝ NPT 3¾˝ x 3⅝˝ x 3¾˝ 2 lbs. $ 9.9511-2576 1½ 115 20 40 ¼˝ NPT 3½˝ x 2¼˝ x 3˝ 1½ lbs. $12.99

Air ThrottleValveITEM 4-1465$5.95• New, GUARDAIR Model SV803. Excessflow check valve allows air to flow up to 90PSI at 48 CFM. Valve then closes cutting offair flow except for a relief amount througha pinhole. Heavy galvanized steel. Ports ⅜˝NPT. Size 1½˝ diam. x 3½˝. Shpg. 1½ lbs.

Ordering Information & Shipping Rates on pages 102 - 103Order Blank on page 104

Pen Air Cylinders• New, HUMPHREY. Pen style air cylinders.Aluminum construction, 100 PSI workingpressure. All have 10-32 ports. Shpg. ¼ lb.

Bore - Rod Dimensions¼˝ = 0.118˝ ⅜˝ = 0.156˝ ⅝˝ = 0.197˝

Single Acting - Nose Mount ITEM Bore Stroke R. Lgth. Price 4-14525 ⅝˝ ¼˝ 2.875˝ $6.95 4-15489 ⅝˝ ⅜˝ 3.125˝ $6.95 4-11106 ⅝˝ ½˝ 3.125˝ $6.95

Double Acting - Nose Mount ITEM Bore Stroke R. Lgth. Price 4-13815 ¼˝ ¼˝ 3.5˝ $5.95 4-14392 ¼˝ ⅜˝ 3.125˝ $5.95 4-13281 ⅜˝ ⅜˝ 3.6875˝ $6.95 4-14652 ⅝˝ ¼˝ 3.25˝ $6.95 4-14765 ⅝˝ ¼˝ 3.375˝ $6.95 4-13935 ⅝˝ ¼˝ 3.625˝ $6.95 4-14648 ⅝˝ ¼˝ 3.75˝ $6.95 4-13595 ⅝˝ ½˝ 4˝ $6.95

800-488-3407 Air Cylinders 113&

¾˝ Bore Air Cylinders• Used BIMBA stainless steel. Extend portin base, retract port in rod end.SPECIFICATIONS• Double acting • Threaded rod end• Bore ¾˝ ¼˝-28 x ½˝ long• PSI max. 250 • Nose mount threaded ⅝˝-18• Rod diam. ¼˝ • Flat base 0.81˝ O.D.• Ports ⅛˝ NPT • Shpg. 1 lb.

ITEM 4-1761-A $4.95• P/N 53E743. Stroke ¾˝, retracted lgth. 5˝(rod end to base end).

ITEM 4-1761-B $4.95• P/N 53E712. Stroke 15/16˝, retracted lgth.5⅜˝ (rod end to base end).

¾˝ Bore, 13¾˝ Stroke

ITEM 4-1112 $27.95SPECIFICATIONS • Rod diam. ¼˝• Double acting • Ports ⅛˝ NPT• Bore/stroke ¾˝ x 13¾˝ • ⅝˝ threaded front mount• 250 PSI • Shpg. 1½ lbs.

12 mm Bore, 2¾˝ Stroke

ITEM 4-1630 $5.95• New, FESTO Model DO-12-74-PP-SA aircylinder. Stainless steel tubing with alu-minum end-caps. 10-32 ports withadapters to 1/16˝ hosebarbs. Rod endthreaded 4 mm, 0.70˝ pitch. Base end-captapped 4 mm, 0.70˝ pitch. Cushions atboth ends of stroke.SPECIFICATIONS • Press. 8 Bar (116 PSI) max• Double acting • Ports 1/16˝ hosebarbs• Bore 12 mm (0.472˝) • Retracted lgth.• Stroke 2¾˝ 6¾˝ end-to-end• Rod dia. 4 mm (0.156˝) • Shpg. 1 lb.

2½˝ Bore, 24˝ Stroke

ITEM 4-1903 $99.95• New, BIMBA Model D110204-A. Doubleacting air cylinder. Stainless Steel bodywith aluminum head and cap. Threadednose mount. Furnished with breather in rodend port.SPECIFICATIONS • Pressure 250 PSI max.• Double acting • Ports ⅜˝ NPT• Bore 2½˝ • Retracted lgth. 29¼˝• Stroke 24˝ • Nose mnt. 1.375-12 thread• Rod dia. ¾˝ • Shpg. 9 lbs.

HumphreyPen Air Cylinders

• New, HUMPHREY. Pen style air cylinders.Aluminum construction, 100 PSI workingpressure. All have 10-32 ports. Shpg. ¼ lb.

Bore - Rod Dimensions ⅜˝ = 0.156˝ ⅝˝ = 0.197˝

Double Acting - Nose Mount - Base Clevis ITEM Bore Stroke R. Lgth. Price 4-14879 ⅜˝ ¼˝ 3.4375˝ $7.95 4-11115 ⅝˝ ½˝ 4.25˝ $6.95

Double Acting - Nose Mount Threaded Base ITEM Bore Stroke R. Lgth. Price 4-14474 ⅝˝ ¼˝ 3.625˝ $5.95 4-11119 ⅝˝ ½˝ 3.875˝ $6.95

Humphrey Multi-MountAir Cylinders

• New, HUMPHREY. Multi-mount style aircylinders. Aluminum construction, rated to100 PSI working pressure. 10-32 ports.

Bore - Rod Dimensions ¼˝ = 0.118˝ ⅜˝ = 0.197˝ ⅝˝ = 0.236˝

Single ActingPush Only

ITEM Bore Stroke R. Lgth. Shpg. Price

4-10621 ¼˝ ¼˝ 2.14˝ ½ lb. $5.954-10622 ⅜˝ ¼˝ 2.337˝ ¾ lb. $5.954-10633 ⅜˝ ½˝ 2.587˝ ¾ lb. $5.954-10640 ⅝˝ ¼˝ 2.533˝ ½ lb. $6.954-10647 ⅝˝ ½˝ 2.783˝ ¾ lb. $6.95

Double Acting


4-10618 ¼˝ ½˝ 2.193˝ ½ lb. $5.954-10613 ¼˝ ¾˝ 2.443˝ ½ lb. $5.954-10624 ⅜˝ ½˝ 2.39˝ ¾ lb. $5.954-10631 ⅜˝ ¾˝ 2.64˝ ½ lb. $5.954-10646 ⅝˝ ½˝ 2.587˝ ¾ lb. $6.954-10637 ⅝˝ ¾˝ 2.837˝ 1 lb. $7.99

Double ActingDouble Rod


4-10627 ⅜˝ ½˝ 3.4375˝ ¼ lb. $16.954-10630 ⅜˝ ¾˝ 3.902˝ ½ lb. $8.954-10649 ⅝˝ ½˝ 3.677˝ ¾ lb. $9.954-10636 ⅝˝ ¾˝ 4.177˝ ¾ lb. $9.95

1½˝ x 10˝ DA Air Cylinder

ITEM 4-1909 $79.95• New, stainless steel air cylinder.Threaded rod end and rear tang mount.SPECIFICATIONS • Pressure 150 PSI max.• Double Acting • Ports ⅛˝ NPT• Bore 1½˝ • Retracted lgth. 18˝• Stroke 10˝ • Mount tang 1½˝ wide,• Rod dia. ⅝˝ ½˝ pin hole w/bushings• Rod thread 9/16-18 x 1½˝ • Shpg. 5 lbs.

Single Acting9/16˝ Bore, 2˝ Stroke

ITEM 4-1726 $5.95• Used BIMBA Model 022 air cylinder.Single acting push, spring return. Includesa right angle compression fitting for ⅛˝O.D. tubing.SPECIFICATIONS • Port 10-32• Single acting push type • Retracted lgth. 5¼˝• Bore 9/16˝/stroke 2˝ • Nose mount 7/16˝• 250 PSI max. • Rod threaded 10-32• Rod diam. 3/16˝ • Shpg. ¼ lb.

7/16˝ x 1˝ Double Ended

ITEM 4-1705 $5.95• New, BIMBA. Nose mount each end. Springloaded to one end, only moves to one side.SPECIFICATIONS • Rod diam. 3/16˝ w/10-32• Double acting UNF threaded ends

w/spring return • Mtg. threads ⅜˝-24• Bore/stroke 7/16˝ x 1˝ • Mtg. distance 4¼˝• 250 PSI • Overall length 8¼˝• Ports 10-32 • Shpg. ½ lb.

Double Air Cylinder

ITEM 4-1419 $18.99• New, BIMBA. Two independent, double-acting cylinders connected in the middle.Four ports, two in the middle, one in eachend. Both ends of body threaded ⅝˝-18RH x ⅜˝ long. Rod ends threaded 5/16˝-24RH x ½˝ long. Retracted length 14⅞˝ fromrod end to rod end.SPECIFICATIONS• Double acting, double cyl. • Pressure 250 PSI max.• Bores 11/16˝ • Ports ⅛˝ NPT• Strokes 3˝ and 4˝ • Mount threaded ends• Rods dia. 5/16˝ • Shpg. 2 lbs.

24 VACSolenoidValve

ITEM 20-1311$9.99• New, ASCO. Operates on 24 VAC, 6watts. Ports ⅛˝ NPT. Pressure ratings air275 PSI, water 200 PSI, oil 150 PSI. Nor-mally open two ways. Brass body. Size 3¼˝x 2˝ x 1½˝. Shpg. 1½ lbs.


114 Valves www.surpluscenter.com8

120 VAC SolenoidValve

ITEM 20-1470$7.95• New DOLE solenoid valve. Normallyclosed. Screened inlet. All plastic con-struction.SPECIFICATIONS • Inlet ⅜˝ NPT• Coil 120 volt AC • Outlet ⅜˝ hosebarb• Watts 10 • 50 PSI• Size 3¼˝ x 3¼˝ x 1¾˝ • Shpg. 1 lb.

120 VAC N.C.WaterValve

ITEM 20-1419$4.95• New DOLE VALVE CO. GS-30. Normallyclosed valve opens when 120 VAC is appliedat the terminals. For use with low pressure (5PSI) water circuits. Spade terminals.SPECIFICATIONS• Coil 120 VAC • Ports ¼˝ NPTM• N.C. • Size 3½˝ x 15/16˝ x 2¾˝• Duty intermittent • Shpg. ½ lb.

Brass Ball Valves, Gate Valves & Check Valves• New, CHAMPION-ARROWHEAD lead-free brass ball valves, gate valves and check valves.Valves meet NSF61-9 regulations and California's AB-1953 regulations. All are full port.

• FIP (Female Iron Pipe) ports comply with ANSI BI.20.1, rated for temperature range -20°F to 300°F.• Copper compression and push-fit ports designed to IGC 188, rated to 232 PSI max., 203°F max. temperature.

• Copper sweat or solder ports comply with ANSI B16.18, rated for temperature range -20°F to 300°F.• PEX ports designed to ASTM F-1807 and IGC 157, crimp connection rated to 160 PSI at 73°F.

Ball ValvesPSI Length x Width x Height

ITEM Model Number Ports (CWP) Max. without Handle Shpg. Price20-1652-25 BV14FPT600LF ¼˝ NPT FIP 600 111/16˝ x 31/32˝ x 111/16˝ ½ lb. $4.2920-1652-38 BV38FPT600LF ⅜˝ NPT FIP 600 1¾˝ x 131/32˝ x 121/32˝ ½ lb. $4.4920-1652-50 BV12FPT600LF ½˝ NPT FIP 600 23/32˝ x 17/32˝ x 23/32˝ ½ lb. $4.9920-1652-75 BV34FPT600LF ¾˝ NPT FIP 600 2⅜˝ x 117/32˝ x 2⅜˝ 1 lb. $5.9920-1652-100 BV100FPT600LF 1˝ NPT FIP 600 215/16˝ x 127/32˝ x 2⅞˝ 1½ lbs. $7.9920-1652-150 BV150FPT600LF 1½˝ NPT FIP 600 3⅝˝ x 223/32˝ x 315/16˝ 3 lbs. $8.9920-1653-50 BV12SWT600LF ½˝ copper sweat 600 2˝ x 1¼˝ x 23/32˝ ½ lb. $3.9920-1653-75 BV34SWT600LF ¾˝ copper sweat 600 2¾˝ x 117/32˝ x 213/32˝ 1 lb. $4.9920-1654-50 BV12CMP200LF ½˝ Copper compression 232 215/16˝ x 17/32˝ x 23/32˝ 1 lb. $4.9920-1654-100 BV100CMP200LF 1˝ Copper compression 232 327/32˝ x 113/16˝ x 227/32˝ 1½ lbs. $7.9920-1655 BV100PEX200LF 1˝ PEX 200 3¼˝ x 1½˝ x 29/32˝ 1 lb. $7.9920-1656-100 BV100PSH200LF 1˝ Push-Fit 232 4¼˝ x 127/32˝ x 225/32˝ 1½ lbs. $7.99Gate Valves

PSI Length x Width x HeightITEM Model Number Ports (CWP) Max. without Handle Shpg. Price20-1657-50 GV12IPS200LF ½˝ IPS 200 117/32˝ x 15/32˝ x 39/32˝ ½ lb. $4.9920-1657-75 GV34IPS200LF ¾˝ IPS 200 123/32˝ x 17/32˝ x 3⅝˝ 1 lb. $5.9920-1657-150 GV150IPS200LF 1½˝ IPS 200 2¼˝ x 23/32˝ x 5¾˝ 2 lbs. $8.9920-1658-50 GV12SWT200LF ½˝ copper sweat 200 121/32˝ x 15/32˝ x 315/16˝ ½ lb. $4.9920-1658-100 GV100SWT200LF 1˝ copper sweat 200 2½˝ x 115/32˝ x 4˝ 1 lb. $7.9920-1658-125 GV125SWT200LF 1¼˝ copper sweat 200 221/32˝ x 111/16˝ x 4¾˝ 1½ lbs. $7.9920-1658-150 GV150SWT200LF 1½˝ copper sweat 200 215/16˝ x 115/16˝ x 5⅝˝ 2 lbs. $8.9920-1658-200 GV200SWT200LF 2˝ copper sweat 200 315/32˝ x 25/32˝ x 6¼˝ 3 lbs. $9.99Check Valves

PSI Length x Width x HeightITEM Model Number Ports (CWP) Max. without Handle Shpg. Price20-1659-50 CV12IPS200LF ½˝ IPS 200 21/16˝ x 1¼˝ x 23/32˝ ½ lb. $4.9920-1659-75 CV34IPS200LF ¾˝ IPS 200 211/32˝ x 17/16˝ x 25/16˝ 1 lb. $5.9920-1659-100 CV100IPS200LF 1˝ IPS 200 223/32˝ x 123/32˝ x 2⅝˝ 1 lb. $7.9920-1659-125 CV125IPS200LF 1¼˝ IPS 200 3⅛˝ x 21/32˝ x 31/32˝ 1½ lbs. $7.99


120 VAC DualSolenoidValveITEM 20-1483$8.99• New, DOLE water-mixing valve. Consistsof two N.C. solenoid valves mounted in ametal and plastic frame. Screened inletports.SPECIFICATIONS• 120 VAC, 10 watt coils • ¼˝ spade terminals• Two G.H.T. inlet ports • Size 4¾˝ x 3˝ x 3˝• One ½ ̋hosebarb outlet port • Shpg. 1½ lbs.

20-1652 Series

20-1653 Series

20-1654 Series

20-1655

20-1656 Series

20-1657 Series

20-1658 Series

20-1659 Series

800-488-3407 Agricultural Chemical Pumps 115&

Hydraulic DrivenCentrifugalPump

ITEM 2-1180 $653.50• Brand new HYPRO Model 9303-HM1C.Cast iron centrifugal pump with direct drivehydraulic motor. Power from tractor hyd rau -lic circuit leaving PTO free for other uses.SPECIFICATIONS• Max. pressure 120 PSI • 140° F max. fluid temp• Max. pump flow 112 GPM • Hydraulic requirements• Pump inlet 1½˝ NPT 13 GPM at 2000 PSI• Pump discharge 1¼˝ NPT • Size 11˝ x 7¾˝ x 8¼˝• Hyd. motor ports ½˝ NPT • Shpg. 31 lbs.

Steel ShaftCouplers• Solid steel shaft couplers with four setscrews instead of keyway. Shpg. 2 lbs.

ITEM 1320-0015 ⅝˝ to ¾˝ $23.85ITEM 1320-0016 ⅝˝ to ⅝˝ $22.95

High VolumeRollerPump

ITEM 2-1215$388.30

• Brand new HYPRO Model 1502C. Sixroller pump delivers high volume at lowRPM. Cast iron body. Buna-N- seals.SPECIFICATIONS • Ports 1½˝ NPT• 33 GPM at 540 RPM • Max. fluid temp. 140° F

62 GPM at 1000 RPM • Rotation CCW• PSI 150 max. • Shaft 15/16˝ diam.• RPM 1000 max. • Shpg. 28 lbs.

Line Strainers• Brand new HYPRO. Keepsdebris from being drawn thrupump. Provides longer com-ponent life and less downtime.SPECIFICATIONS• Polypropylene construction • 50 mesh• EPDM gasket stainless steel screen• 80 PSI at 70° F • Shpg. 1 lb.

ITEM 20-997 $9.70• ½˝ NPT, 7.7 sq. in. open area.

ITEM 20-998 $10.45• ¾˝ NPT, 7.7 sq. in. open area.

ITEM 20-999 $14.20• 1˝ NPT, 13.5 sq. in. open area.

ChemicalSprayRollerPumps• Brand new. Many industrial, marine, horti-cultural, agricultural uses. For weed and in-sect control. Handles wettable powders,light oils, aromatic solvents, etc. Ni-Resisthigh nickel content alloy provides better cor-rosion resistance for agricultural chemicals.SPECIFICATIONS • 150 PSI• Ports ¾˝ NPT • Self-priming to 3 ft.• Lift to 22 ft. (primed) • Ball bearings• CW • Positive displ.• Stainless steel shaft • Size 5¼˝ x 4⅜˝ x 3˝⅝˝ diam. x 1⅜˝ • Shpg. 6 lbs.

ITEM 222 $210.20• Use w/electric motor. Model 4001N,max. 1800 RPM. Ni-Resist.

ITEM 224 $202.75• Use w/gas motor. Model 4101N, max.2600 RPM. Ni-Resist. ITEM 222 ITEM 224 1100 RPM 1800 RPM 1800 RPM 2600 RPM PSI GPM HP GPM HP GPM HP GPM HP 50 4.4 ¼ 8.0 ½ 4.5 ⅓ 6.6 ½ 150 3.3 ¾ 6.7 1¼ 3.4 1 5.4 1¼

Disassemble and reverse rotor for reverse rotation.

22 GPM,7 RollerPumpITEM 268-CP$163.80SPECIFICATIONS• 22.4 GPM • Stainless steel shaft• 200 PSI 15/16˝ diam. x 21/16˝• 850 RPM • Replaceable nylon rollers• Ports ¾˝ NPT • Replaceable seals• CCW • Size 6⅞˝ x 6⅝˝ x 6˝• Ball bearings • Shpg. 18 lbs.

PERFORMANCE TABLESPEED 0 PSI 100 PSI 200 PSI RPM GPM HP GPM HP GPM HP 550 15 ¼ 12.8 ¾ 11.4 1¼ 850 22.4 ½ 20.6 1¼ 19.1 1¾

18 GPM,8 RollerPumpITEM 267-CP$160.95SPECIFICATIONS• 18.3 GPM • Stainless steel shaft• 300 PSI 15/16˝ diam. x 2˝• 850 RPM • Replaceable nylon rollers• Ports ¾˝ NPT • Replaceable seals• CCW • Size 6¾˝ x 6½˝ x 6½˝• Ball bearings • Shpg. 18 lbs.

PERFORMANCE TABLESPEED 0 PSI 100 PSI 300 PSI RPM GPM HP GPM HP GPM HP 550 12.0 ¼ 10.6 1¼ 8.0 3 850 18.3 ½ 16.9 1½ 14.2 4½

20 GPM,6 RollerPumpITEM 278-CP$127.40SPECIFICATIONS• 19.5 GPM • Shaft ⅝˝ diam. x 1½˝• 300 PSI • Ball bearings• 400 to 1200 RPM • Replaceable rollers, seals• Ports ¾˝ NPT • Size 6˝ x 5¾˝ x 2½˝• CCW • Shpg. 12 lbs.

PERFORMANCE TABLESPEED 0 PSI 100 PSI 300 PSI RPM GPM HP GPM HP GPM HP 540 9.1 0.21 6.5 0.81 3.3 2.10 1200 19.5 0.69 17.3 1.80 14.1 4.51

Roller PumpQuickCouplers• Brand new. Use to connect Hypro rollerpumps to standard tractor 1⅜˝ 6 spline 540RPM PTO shafts. Die cast constructionwith quick release collar.

ITEM 1321-0006 $30.35• Fits onto ⅝˝ pump shafts (6 rollerpumps). Shpg. 4 lbs.

ITEM 1321-0007 $33.05• Fits onto 15/16˝ pump shafts (7 & 8 rollerpumps). Shpg. 4 lbs.

ReplacementRoller Kits

• Brand new. Consists of proper numberof Hypro Super Rollers to bring pump backto peak performance.

ITEM 3430-0581 $21.50• For 4000 series 4 roller pumps. Shpg. 1 lb.

ITEM 3430-0582 $25.75• For 6000 series 6 roller pumps. Shpg. 1 lb.

ITEM 3430-0583 $37.20• For 7000 series 7 or 8 roller pumps.Shpg. 1½ lbs.

High PressureCentrifugalPump

ITEM 2-1222$299.00• Brand new HYPRO 9203-C. Cast ironpedestal pump. Provides high volume andhigh pressure. Viton seal.SPECIFICATIONS • Shaft ⅝˝ diam. x 2⅛˝• GPM 136 max. w/keyway• PSI 180 max. • Inlet 1½˝ NPT• RPM 6000 max. • Outlet 1¼˝ NPT• Temp. 140° max. • Size 7¼˝ x 8¼˝ x 6¾˝• Rotation CCW • Shpg. 21 lbs.

Tractor Spray Pumps• Brand new. HYPRO roller pumps give high volume and pressure for all types of agri-cultural spraying. Rotation can be reversed by disassembly. Super Rollers are compat-ible with a wide variety of chemicals. Cast iron body for general purpose spraying.

116 Miscellaneous Pumps www.surpluscenter.com8272 GPM, 6.5 HPEngine-DrivenTrashPump

ITEM 2-1340 $639.75• Brand new, HYPRO Model 1543A-TSP.Self-priming aluminum body trash pump.Pump front cover is easily taken off to re-move any debris. Aluminum impeller canhandle solid particles in suspension up to 1˝dia. EPDM mechanical seal and inlet valve.Hose barb and strainer for inlet hose sup-plied (hose not included). Steel roll cage.SPECIFICATIONS• 6.5 HP • Max head 106 ft. (46 PSI)• PowerPro OHV gas engine • Max. suction lift 23 ft.• Pump performance: • Self-priming

272 GPM @ 12 ́head (5 PSI) • 3˝ NPT ports179 GPM @ 58́ head (25 PSI) • Size 23˝ x 18˝ x 18˝50 GPM @ 93 ́head (40 PSI) • Shpg. 98 lbs.

2˝ Hypro PolypropyleneTransferPump

With Briggs & Stratton 550 Engine

ITEM 2-1440 $199.95• New, HYPRO 1542P-550BSP Self-prim-ing polypropylene centrifugal pump to pro-vide high-capacity liquid transfer. Use fortransferring water, liquid fertilizers and her-bicides including Roundup and Atrazineand other chemicals compatible withpump materials. Self-priming also makesit ideal for lawn and garden watering, tankfilling and flood water removal when usedwith a strainer and foot valve (not in-cluded). Nylon impeller can handle solidparticles in suspension up to 3/8˝ diameter.EPDM mechanical seal and inlet valve.SPECIFICATIONS• Engine Briggs & Stratton • Max. suction lift 25 ft.• Ports 2˝ NPT • Overall size 19˝ x 15˝ x 13˝• Max head 134 ft. (58 PSI) • Shpg. 54 lbs.• Pump performance:

150 GPM at 0 ft. head (0 PSI)150 GPM at 58 ft. head (25 PSI)65 GPM at 115 ft. head (50 PSI)

12 VDC CentrifugalPump

ITEM 2-1155$214.20• Brand new HYPRO “Aqua-Tiger”.Bronze centrifugal pump. Use for agchemical transfer, live well aeration, circu-lation, etc. Permanent magnet motor. Notself-priming.SPECIFICATIONS • 140° F max.• 12 VDC, 5.5 amps • Ports ¾˝ NPT• Max. flow 19 GPM • Size 7˝ x 4½˝ x 4˝• Max. 7 PSI • Shpg. 8 lbs.

Simer WaterPumps

• New, SIMER.Flex ible im-peller pump.Use to pump

water, brine solutionsand light lubricating oils.

WARNING: This pump should never beused to pump flammable fluids! Wired witha 4 ft. power cord with on/off switch andalligator clips. Permanent magnet motor.Includes two garden hose to ½˝ hosebarbadapters and instructions.SPECIFICATIONS FOR BOTH• Self-priming to 9 feet • Male garden hose thread ports• Two hour run time max. • Base mount

12 VDCITEM 2-1261 $49.95SPECIFICATIONS• Model EBW50 • 20 PSI max.• 1140 liters/hour (301 GPH) • Size 7⅛˝ x 4½˝ x 4½˝• 12 VDC • Shpg. 7 lbs.

24 VDCITEM 2-1264 $39.95• Model EBW50-24. Same as ITEM 2-1261above except 24 VDC.

Magnetic DriveChemicalPump

ITEM 2-1075 $156.60• Brand new LITTLE GIANT 2-MD pump.Magnetic drive eliminates shaft seal for re-duced wear and maintenance. Poly pro -pylene pump housing handles lowconcentrate acids. Max. fluid temp. 150° F.Also makes excellent circulation pump.SPECIFICATIONS • 5½ GPM at 9 ft. head• 115 VAC • Max. head 14½ ft.• 1.5 amps • IN ½˝ NPT• 3100 RPM • OUT ½˝ NPT• Magnetic drive • Size 8½˝ x 4˝ x 4½˝• Max. temp. 150° F • Shpg. 7 lbs.

Mini FountainPump

• New, OASE.Submersible

fountain pumpfor indoor or outdoor use. Adjustable outputflow. Integral 18/3 cord is water resistant withthree prong plug. Two suction cups on bottomto hold pump in place. UL Listed. Made in Italy.

ITEM 2-1254 $5.99SPECIFICATIONS • 6 ft. long cord• Model SP70G • 4 watts• 115 VAC • ½˝ O.D. outlet tube• 35-70 GPH • Size 113/16˝ x 1¾˝ x 113/16˝• 31˝ max. head • Shpg. 1 lb.

ITEM 2-1255 $3.99SPECIFICATIONS • 5½ ft. long cord• Model SP40G • 4 watts• 115 VAC • ½˝ O.D. outlet tube• 30-55 GPH • Size 1⅞˝ x 1⅝˝ x 1¾˝• 18˝ max. head • Shpg. 1 lb.

6.5 HP Engine-DrivenWaterPump

ITEM 2-1339 $229.99• Brand new, HYPRO. Self-priming, alu-minum centrifugal pumps. Use for trans-ferring water, tank filling and flood waterremoval. Aluminum impeller can handlesolid particles in suspension up to ⅜˝ di-ameter. EPDM mechanical seal and inletvalve. Hose barb port adapters andstrainer for inlet hose supplied (hose notincluded). Steel roll cage.SPECIFICATIONS• Model 1543A-SP• PowerPro OHV gas engine • 6.5 HP• Pump performance: • Max. suction lift 23´

252 GPM @ 23´ head (10 PSI) • Self-priming190 GPM @ 58´ head (25 PSI) • 3˝ BSP ports99 GPM @ 93´ head (40 PSI) • Size 20˝ x 16˝ x 18˝Max head 118´ (51 PSI) • Shpg. 75 lbs.

Compact12 VDC

PumpITEM 2-1413

$4.95• Used small 12 VDC centrifugal pump.Non-submersible. Auxiliary 3/16˝ I.D. line onpump intake. Plastic construction.SPECIFICATIONS • Outlet ¼˝ hosebarb• Voltage 12 VDC • Mount 2 holes 0.55˝ c/c• Flow 1 GPM • Size 3⅛˝ x 1⅝˝ x 2⅛˝• Inlet 9/16˝ hosebarb • Shpg. 1 lb.

3˝ Trash PumpHead

ITEM 2-1438 $119.95• New, HYPRO 3˝ aluminum trash pumphead. Simply add your own 6.5 HP enginewith ¾˝ keyed crankshaft. Removable frontcover allows easy cleanout. Cast iron vo-lute and impellor for long life. Will handlesolids up to 1˝ dia. Includes intake strainerwith hose barb connector. EPDM mechan-ical shaft seal and inlet valve to retainprime after initial setup.SPECIFICATIONS• HP required 6.5 minimum • Mtg. pattern to engine• Ports 3˝ NPT 4 holes on 3⅝˝ bolt circle• Input shaft required • Furnished with 5/16-24 bolts

¾˝ dia. keyed • Base mount slotted 9½˝ c/c• Max. head 106 ft.(46 PSI) • Size 12˝ x 10˝ x 13˝• Max. suction lift 23 ft. • Shpg. 40 lbs.

Flow Rate at Ft. of Head (PSI)Flow Rate Ft of Head (PSI)272 GPM at 12 Ft. (5 PSI)179 GPM at 58 Ft. (25 PSI)50 GPM at 93 Ft. (40 PSI)

800-488-3407 Diaphragm & Piston Pumps 117&

AGRASprayGun

ITEM 18-939$29.99• New, AGRA Hydra agricultural spray gun.Use for turf, tree or shrub spraying. Fea-tures trigger on lock button. Stainless steeland brass internal parts with ceramic noz-zle. Diffuser lever to control spray width.Larger nozzles can be substituted forhigher volume spraying.SPECIFICATIONS• Pressure 725 PSI max. • Flow• Nozzle size 1.2mm 1 GPM at 290 PSI• Connection ½˝ BSP male 1.5 GPM at 720 PSI• Size 13˝ x 2¾˝ x 3˝ • Shpg. 3 lbs.

ITEM Style Description Hose ID NPT Fitting Shpg. Price2-1368 B Elbow ½˝ ½˝ NPTF Swivel ¼ lb. $ .752-1371 B Elbow ⅝˝ ½˝ NPTF Swivel ¼ lb. $ .752-1370 B Elbow ¾˝ ½˝ NPTF Swivel ¼ lb. $ .752-1372 C Straight ⅜˝ ⅜˝ NPTM ¼ lb. $ .402-1374 C Straight ½˝ ½˝ NPTM ¼ lb. $1.95

ITEM Style Description Hose ID NPT Fitting Shpg. Price2-1366 A Straight ⅜˝ ½˝ NPTF Swivel ¼ lb. $ .752-1367 A Straight ½˝ ½˝ NPTF Swivel ¼ lb. $ .752-1364 A Straight ⅝˝ ½˝ NPTF Swivel ¼ lb. $ .752-1365 A Straight ¾˝ ½˝ NPTF Swivel ¼ lb. $ .752-1369 B Elbow ⅜˝ ½˝ NPTF Swivel ¼ lb. $ .75

Shurflow Diaphragm Pumps• Brand new, SHURFLO automatic demand di-aphragm pumps. Ideal for spot sprayers. Santoprenediaphragm and Viton valves. Can run dry intermit-tently. Rubber mounting feet. Intermittent duty. Auto-matic on/off pressure switch. Use adapters shownbelow for ½˝ MSPT ported items (metal fittings andrigid pipe are not recommended). Wire leads on DCmodels, 6 ft. power cord on AC model.

Switch Self Open Max. Settings Priming ITEM Model Volts Amps Flow GPM at PSI PSI Ports on/off Lift max. Size Shpg. Price 2-1361 SLV10-AA41 12 DC 4 1 GPM 0.49 at 30 50 ⅜˝ hosebarb 25/40 PSI 2½ ft. 7˝ x 3⅝˝ x 2⅜˝ 3 lbs. $ 48.95 2-1360 8000-543-236 12 DC 6.4 1.8 GPM 1.4 at 40 50 ⅜˝ NPTF 30/50 PSI 8 ft. 8¼˝ x 4˝ x 4½˝ 6 lbs. $ 87.10 2-1362 2088-343-135 12 DC 7.7 3 GPM 2.05 at 40 40 ½˝ MSPT 25/45 PSI 12 ft. 8¾˝ x 6˝ x 4½˝ 6 lbs. $103.70 2-1363 2088-394-144 115 AC 0.9 3 GPM 1.6 at 40 40 ½˝ MSPT 25/45 PSI 12 ft. 9˝ x 5¼˝ x 4⅞˝ 6 lbs. $155.80

2-1361 2-13622-1360 2-1363

A B C

ShurfloHosebarb to Pipe Fittings

• Brand new Shurflo polypropylene hosebarb to pipe fittings.

InlineStrainerITEM 20-1237-30$7.95• New. Polypropylene line strainer. Brasscaptive nuts for mounting. Threaded bowl.SPECIFICATIONS • Mesh size 30• Ports ½˝ NPT • Shpg. 1 lb.

HyproBig TwinPumps• Brand new. Highvolume two cylin-der piston pumps.used in a variety ofspraying and clean-ing applications.Fur nished withleather cups for herbicide andinsecticide use.SPECIFICATIONS • Shaft 1˝ diam. w/keyway• 400 PSI max. • Reversible• Ports ¾˝ NPT • Size 6¾˝ x 7½˝ x 6¼˝• 140° F max. temp. • Shpg. 19 lbs.

ITEM 2-1120 $512.05• Model 5206C. 6 GPM at 800 RPM max.

ITEM 2-1121 $512.05• Model 5210C. 10 GPM at 600 RPM max.

Performance Chart ITEM 2-1120 ITEM 2-1121 100 PSI 400 PSI 100 PSI 400 PSI GPM HP GPM HP GPM HP GPM HP540 RPM 5.4 0.50 5.3 1.5 9.4 0.94 9.2 2.7800 RPM 7.9 0.74 7.7 2.2 9.9 1.10 9.8 3.0

3 GPM PistonPumps

• Brand new.Handles variousspraying, wash-ing and highpres sure applica-tions. For hydrostatictesting, pressure in -jecting and other high pres-sure low volume applications.SPECIFICATIONS • Reversible• Model C-5330 • Sealed ball bearings• 3 GPM at 500 PSI • Replaceable cyl. sleeves• Max. 500 PSI • Stainless steel valves• Max. 1800 RPM • Size 6˝ x 5˝ x 5˝• Ports ½˝ NPT • Shpg. 12 lbs.

ITEM 245 $293.25• ⅝˝ hollow shaft. Mounts directly overmotor shaft.ITEM 245-A $293.25• ⅝˝ solid shaft. Use w/ couplings or beltand pulley.ITEM 245-B $377.95• Same as ITEM 245 above with ad justablesoap injector. Shpg. 13 lbs. PSI RPM 0 50 100 200 300 400 500 900 ¼ ¼ ¼ ¼ ⅓ ½ ½ 1200 ¼ ¼ ¼ ⅓ ½ ½ ¾ 1800 ¼ ⅓ ½ ½ ½ 1 1

Listed in required HP.

12 VDCDiaphragmPump

ITEM 2-1441 $18.95• New, FLOJET automatic demand di-aphragm water pump. Santoprene di-aphragm and EPDM valves. Automaticshut off switch set to 35 PSI. Pump turnson at 25 PSI. Self priming to 2½ ft. Wireleads.SPECIFICATIONS • Ports quick attach• Voltage 12 VDC (adapters not included)• Amperage 4 Amps • Duty intermittent• Shut-off pressure 35 PSI • Size 5½˝ x 2¾˝ x 2˝• Flow rate 1 GPM at open flow • Shpg. 2 lbs.

118 AC Centrifugal Pumps www.surpluscenter.com8

115 VACIce Machine

Pump

ITEM 2-1437$29.95

• New, BECKETT Model BRPMA51 icemachine pedestal pump. Features includepolystyrene column and cap, ODP motorwith fan and cover. 5˝ depth from bracketto bottom of pump.SPECIFICATIONS • Max head 9 ft.• Voltage 115 VAC • Duty continuous• Amperage 1.8 Amps • Power cord 7˝ long• Power 1/30 HP w/triangular plug• Speed 3000 RPM • Inlet 1˝ dia. in base• Flow rates • Discharge ½˝ hose barb

3 GPM at 2 ft. head • Size 4½˝ x 4½˝ x 10˝ high2 GPM at 4 ft. head • Shpg. 5 lbs.

115 VAC CoolantRecirculatingPump

ITEM 2-1436$27.95• New, BECKETT Model BJ5A coolant re-circulating pedestal pump. Ideal replace-ment or use with evaporative coolers,displays, laboratories and other watertransfer applications. Features includepolystyrene column and cap, ABS baseplate and a ½˝ OD PVC adapter. ODPmotor with fan and cover.SPECIFICATIONS • Speed 3000 RPM• Voltage 115 VAC • Max. head 88 ft. (38 PSI)• Amperage 0.9 Amps • Shut-off at 10.1 ft. head• Power 1/70 HP • Duty continuous• Flow Rates • Power cord 3 foot 18/3

340 GPH at 1 ft. head • Inlet base255 GPH at 4 ft. head • Discharge ½˝ hose barb200 GPH at 6 ft. head w/adapter130 GPH at 8 ft. head • Size 4½˝ dia. x 9˝ high40 GPH at 10 ft. head • Shpg. 5 lbs.

BrassValve

ITEM 20-983$3.39• New. ⅛˝ NPT female thread. Size 2½˝ x2⅛˝ x 1½˝. Shpg. ½ lb.

115/230 VAC ShallowWell Jet Pump

With Pressure Switch• New, DIAMOND shallow well jet pumpwith pressure switch. For private well appli-cations up to 25 feet depth to water. Idealfor low flow sprinkler systems. Cast ironpump housing. Continuous duty, TEFCmotor with auto-reset thermal protectionand voltage selection switch. Adjustablepressure switch set to turn ON/OFF at30/50 PSI, 10 PSI minimum ON, 65 PSImax OFF, differential 20-30 PSI.SPECIFICATIONS FOR BOTH• Voltage 115/230 VAC, 60 HZ• Amperage 14.8/7.4 Amps• Pressure 65 PSI shutoff• Ports 1¼˝ NPT suction, 1˝ NPT discharge• Use with PVC adaptors (not included)• Mount two bolts on 5¼˝ or 57/16˝ centers• Size 21˝ x 9˝ x 9˝

ITEM 2-1407 $249.99SPECIFICATIONS• Model 312230 • Max. flow rate 22.2 GPM• Power 1 HP • Shpg. 45 lbs.

ITEM 2-1409 $199.99SPECIFICATIONS• Model 312228 • Max. flow rate 16.5 GPM• Power ¾ HP • Shpg. 43 lbs.

Flow Rates At 30 PSI DischargeGPM at Feet of Lift

ITEM 0 ft. 5 ft. 10 ft. 15 ft. 20 ft. 25 ft.2-1407 22.2 20.1 18.1 14.8 12.12-1409 16.5 8 14.8 12.9 11.2 8.9

FlexibleImpellerPumps

• Brand new SCC. Flexible impeller typepumps. Bronze head. Self-priming. Not forpumping flammable fuels.SPECIFICATIONS • Ports IN ⅜˝ NPTF,• 6 GPM open flow OUT ¾˝ garden hose thread M• 4 GPM at 10 PSI • Size 6˝ x 4˝ x 3¼˝• 18 PSI max. • Shpg. 8 lbs.Waste Oil Models• Use for waste oil or water.

ITEM 2-1185 $92.90• 115 VAC, 2 amps.

Flow (GPH) vs. Pressure (Feet of head)Pressure 1´ 5´ 10´ 20´ 30´ 40´ Shut-OffWater 400 390 358 295 225 120 48 Ft.SAE 30 Oil 240 234 214 177 135 72 28 Ft.

ITEM 2-1186 $83.80• 12 VDC, 10 amps.

Flow (GPH) vs. Pressure (Feet of head)Pressure 1´ 5´ 10´ 20´ 30´ 40´ Shut-OffWater 375 375 342 273 192 85 42 Ft.SAE 30 Oil 231 225 205 163 115 51 25 Ft.

ITEM 2-1185-Kit $10.05• Repair kit includes impeller, seals, re-tainer and cover gasket. Shpg. ½ lb.

ITEM 2-1185-I $6.15• Impeller only. Shpg. 2 oz.

High Strength Polyurethane Impeller• Use for water only.

ITEM 2-1379 $90.25• 12 VDC, 10 amps. See performancechart for ITEM 2-1186 above.

115/230 VAC Cast IronCentrifugal

Pump

ITEM 2-1426$139.99

• New, SHUR-DRI Model SDCP100 cen-trifugal pump. Cast iron pump housing.Continuous duty, ODP motor with thermalprotection and voltage selection switch.SPECIFICATIONS• Voltage 115/230 VAC, 60 HZ • Pressure 43 PSI shutoff• Amperage 14.8/7.4 Amps • Suction port 1½˝ NPT• Power 1 HP • Discharge port 1˝ NPT• Flow 50 GPM at • Size 14˝ x 8˝ x 9˝

35 foot head (15 PSI) • Shpg. 36 lbs.

Flow-Rate In GPM Based On Total Feet of Head20 ft. 40 ft. 60 ft. 80 ft. 100 ft.

58 48 40 27 0

1 HP, 115/230 VAC ConvertibleJet Pump

With Pressure Switch• New, DIAMOND Contractor Series. Forshallow well applications, up to 25 ft. depth,or deep well to 100 ft. Cast iron pump hous-ing. Continuous duty, TEFC motor with auto-

reset thermal protection. Pressure switch set to turn ON/OFF at20/40 PSI, adjustable to 30/50 PSI. Includes pressure gauge and foot valve/strainer.SPECIFICATIONS FOR BOTH• Voltage 115/230 VAC, 60 HZ • Ports 1¼˝ NPT suction, ¾˝ NPT discharge• Amperage 14.8/7.4 Amps • Mount two bolts on 5¼˝ or 57/16˝ centers • Size 21˝ x 9˝ x 9˝• Power 1 HP • Pressure 65 PSI shutoff • Shpg. 45 lbs.

GPM of Shallow Well Lift GPM of Deep Well LiftITEM Model 5 ft. 10 ft. 20 ft. 25 ft. 30 ft. 50 ft. 60 ft. 70 ft. Price2-1408 313522 14.6 12.9 8.8 6.4 7.8 5.9 4.4 4.2 $249.992-1410 313507 14.6 12.9 8.8 6.4 6.9 4.8 3.8 3.2 $249.99

Barrel DrainPetcock

ITEM 20-973$1.99• 1 ̋NPT male. Size 2¾ ̋x 2½ ̋x 1½ .̋ Shpg. 1 lb.

1 HPStainless Steel VerticalPump

ITEM 2-1430$269.99• New, GOULDS Model 1SL4E01D3GE1Rvertically immersed stainless steel endsuction pump. Enclosed impellor for max-imum efficiency. TEFC motor.SPECIFICATIONS• Voltage 115/230 VAC • Max. head 88 ft (38 PSI)• Amperage 11.4/5.7 Amps • Impellor dia. 4¾˝• Power 1 HP • Inlet 1¼˝ NPT• Speed 3450 RPM • Discharge 1˝ NPT• Flow rates • Max fluid temp 250F

20 GPM at 72 ft. head • Size 10˝ x 10½˝ x 26˝40 GPM at 40 ft. head • Shpg. 77 lbs.

800-488-3407 Submersible Pumps 119&

MiniFountainPump

ITEM 2-1172 $31.20• Brand new LITTLE GIANT. Submersible,compact, energy efficient pump for foun-tains, small waterfalls.SPECIFICATIONS• 115 VAC, 5 watts • 6 ft. cord• Adj. flow valve 30-83 GPH • Size 2½˝ x 2˝ x 2˝• Port ½˝ hosebarb • Shpg. 2 lbs.

12 VDC MarineCamperPumpITEM 2-924$28.95• Brand new. For boats, camper-trailers,etc. as bilge or water system pump. Non-corrosive. Use in any position provided in-take is submerged. Fits into tight,out-of-way places.SPECIFICATIONS • IN ½˝ NPT• 12 VDC at 1.8 full load amp • OUT ⅜˝ NPT• 339 GPH at 1 ft. • Size 5½˝ x 2˝ x 2˝• 95 GPH at 10 ft. • Shpg. 2 lbs.

SubmersibleSewagePump

ITEM 2-1042$336.60• Brand new LITTLE GIANT 9SN-CIA-RF.Completely submersible pump for ruggedduty use that standard sump pumps can’thandle. Passes liquid and solid waste upto 2˝ diam. Use on construction or agricul-tural sites for heavy duty dewatering. Castiron housing with corrosion resistant epoxycoating. Vortex nylon impeller. Oil filledmotor housing for rapid heat dissipationand lifetime lubrication.SPECIFICATIONS • 4/10 HP motor• Output • Runs on 115 VAC

6600 GPH at 5 ft. head • 8.5 amp• Max. 20 ft. head • Thermal protection• Fully automatic • 20 ft. power cord

on at 9 - 14˝ • Size 11⅛˝ x 10⅜˝ x 7˝off at 2 - 6˝ • Shpg. 38 lbs.

Submersible115 VAC

Pump

ITEM 2-1036 $68.20• Brand new LITTLE GIANT Model P-AAA.Operates with pump fully submerged inwater. Use for fountains, gardens, etc. Spe-cial case may be mounted with any sidedown. Oil filled sealed motor housing for life-time lubrication. Corrosion resistant nylonhousing. Screened intake. Pumps 70 GPHat 3 ft. head. 6 ft. power cord. Operates on115 VAC, ½ amp. UL Listed. ¼˝ NPT dis-charge port. Size 4˝ x 4˝ x 3˝. Shpg. 3 lbs.

Utility Pump

ITEM 2-1039$115.70• Brand new LITTLEGIANT 5MSP. Ex-tremely versatilepump for many ap-plications. Can beused either sub-merged or simply in stand-ing water. Pump out pools, floodedbasements, boats as well as circulatingwater or machine tool coolants. Operateson 115 VAC, ⅙ HP, 5 amp. Hermeticallysealed and lubricated motor. Tough alu-minum housing with epoxy coating. 10 ft.power cord. Pumps down to ⅛˝. Delivers1000 GPH at 10 ft. head. Max. head 26 ft.1˝ NPT discharge port. Furnished withadapter for garden hose. UL Listed. Size7¾˝ x 6⅛˝ x 4⅜˝. Shpg. 8 lbs.

CompactSubmersible

Pump

ITEM 2-1037 $74.25• Brand new LITTLE GIANT 1MA. Fullysubmersible with side intake and verticaldischarge. Epoxy coated housing withpolypropylene front, impeller and screen.Delivers 100 GPH at 5 ft. head. Max. head7 ft. 115 VAC, 1.1 amp. 6 ft. power cordwith molded plug. Size 4¼˝ x 3⅝˝ x 3⅜˝.Shpg. 3 lbs.

PartsWasherPump

ITEM 2-1038$104.65• Brand new LITTLE GIANT. Submersiblepump made especially for use in partswashers. Flow rate 3 GPM at 1 ft. head.Max. head 7.4 ft. Discharge ¼˝ NPT. Com-patible with UL Listed parts cleaning sol-vents. Max. temp. 100° F. Operates on 115VAC, 1.1 amps. 6 ft. power cord. Size 4˝diam. x 4¼˝. Shpg. 4 lbs.

SubmersibleSwitchKitITEM 2-1040$46.60• Brand new, LITTLE GIANT RS-5 di-aphragm switch. Converts manual pumpsto automatic operation.SPECIFICATIONS• Max. pump power • On level 6˝ to 9˝½ HP at 115 VAC • Off level 1˝ to 4˝

• Max 10 amps • Size 5˝ x 3½˝ x 2˝• Cord lgth. 10 ft. • Shpg. 1½ lbs.

115 VAC Little GiantSumpPump

ITEM 2-1041$148.95

• Brand new, LITTLEGIANT Model 6-CIA.Automatic sumppump turns on whenwater reaches 7˝ to

10˝ depth. Turns offwhen water level falls to between 1˝ and4˝. Automatic thermal overload protection.Cast iron pump housing with protectiveepoxy coating for corrosion resistance.Oil-filled motor housing for lifetime lubri-cation and rapid heat dissipation. Three-prong, 8 ft. power cord.SPECIFICATIONS• Voltage 115 VAC • Flow rates vs. discharge ht.• Amperage 9 Amps 46 GPM at 5 ft. head• Power ⅓ HP 29 GPM at 10 ft. head• Port 1½˝ FNPT 12.5 GPM at 15 ft. head

w/ 1¼˝ FNPT adaptor 18 ft. max. head• Min. sump dia. 18˝ • Size 9½˝ x 8½˝ x 6˝• Duty continuous • Shpg. 20 lbs.

Special Price!

$99.95

¼ HP SubmersiblePumpITEM 2-1425$39.99• New, SHUR-DRI ModelSDSU4 submersible util-ity pump. Furnishedwith adapter to ¾˝male garden hosethread. Pickup screen on bottom inlet. Willpump down to ⅛˝.SPECIFICATIONS• Power ¼ HP • Flow rates• Voltage 115 VAC 1170 GPH at 5 ft. head• Amperage 6 Amps 1020 GPH at 10 ft. head• Port 1¼˝ NPT 510 GPH at 20 ft. head• Line cord 8 ft. 25 ft. shutoff• Size 7⅛˝ dia. x 10˝ • Shpg. 10 lbs.


120 Pillow Block Bearings www.surpluscenter.com8

Special PurchaseCast IronPillow BlockBearings

Set Screw, No Lock Collar ITEM Bore Shpg. Price1-204-12-P-S ¾˝ 3 lbs. $ 5.951-206-19-P-S 13/16˝ 4 lbs. $ 8.951-207-23-P-S 17/16˝ 4 lbs. $11.951-209-27-P-S 111/16˝ 7 lbs. $ 8.95

UCP Series HCP Series DimensionsTwo Set Screws, Eccentric Locking Collar Set LockNo Lock Collar w/Set Screws Screw Collar

Bore ITEM Price ITEM Price Shpg. A B B H H1 HO J L Bolt N1 N2 ½˝ 1-201-08-P $ 7.80 1-201-08-P-C $ 9.20 3 1.457 1.221 1.713 1.311 0.551 2.512 3.780 5.000 ⅜ 0.512 0.630

⅝˝ 1-202-10-P $ 7.80 1-202-10-P-C $ 9.20 3 1.457 1.221 1.713 1.311 0.551 2.512 3.780 5.000 ⅜ 0.512 0.630

¾˝ 1-204-12-P $ 7.55 1-204-12-P-C $ 9.20 3 1.457 1.221 1.713 1.311 0.551 2.512 3.780 5.000 ⅜ 0.512 0.630

⅞˝ 1-205-14-P $ 8.35 1-205-14-P-C $ 9.60 3 1.496 1.339 1.744 1.437 0.591 2.736 4.134 5.512 ⅜ 0.512 0.748

15/16˝ 1-205-15-P $ 8.35 1-205-15-P-C $ 9.60 3 1.496 1.339 1.744 1.437 0.591 2.736 4.134 5.512 ⅜ 0.512 0.748

1˝ 1-205-16-P $ 8.35 1-205-16-P-C $ 9.60 3 1.496 1.339 1.744 1.437 0.591 2.736 4.134 5.512 ⅜ 0.512 0.748

1⅛˝ 1-206-18-P $10.95 1-206-18-P-C $12.95 4 1.732 1.500 1.902 1.689 0.630 3.228 4.764 6.500 ½ 0.699 0.826

13/16˝ 1-206-19-P $10.95 1-206-19-P-C $12.95 4 1.732 1.500 1.902 1.689 0.630 3.228 4.764 6.500 ½ 0.669 0.826

1¼˝ 1-206-20-P $10.95 1-206-20-P-C $12.95 4 1.732 1.500 1.902 1.689 0.630 3.228 4.764 6.500 ½ 0.669 0.826

1¼˝ 1-207-20-P $13.95 1-207-20-P-C $15.95 5 1.890 1.689 2.012 1.874 0.669 3.622 4.961 6.575 ½ 0.669 0.826

15/16˝ 1-207-21-P $13.95 1-207-21-P-C $15.95 5 1.890 1.689 2.012 1.874 0.669 3.622 4.961 6.575 ½ 0.669 0.826

1⅜˝ 1-207-22-P $13.95 1-207-22-P-C $15.95 5 1.890 1.689 2.012 1.874 0.669 3.622 4.961 6.575 ½ 0.669 0.826

17/16˝ 1-207-23-P $13.95 1-207-23-P-C $15.95 5 1.890 1.689 2.012 1.874 0.669 3.622 4.961 6.575 ½ 0.669 0.826

1½˝ 1-208-24-P $16.95 1-208-24-P-C $16.95 6 2.047 1.937 2.217 1.937 0.709 3.858 5.354 7.250 ½ 0.669 0.827

1⅝˝ 1-209-26-P $16.95 1-209-26-P-C $18.95 7 2.126 1.938 2.217 2.126 0.787 4.154 5.748 7.469 ½ 0.669 0.827

111/16˝ 1-209-27-P $16.95 1-209-27-P-C $18.95 7 2.126 1.938 2.217 2.126 0.787 4.154 5.748 7.469 ½ 0.669 0.827

1¾˝ 1-209-28-P $16.95 1-209-28-P-C $18.95 7 2.126 1.938 2.217 2.126 0.787 4.154 5.748 7.469 ½ 0.669 0.827

1⅞˝ 1-210-30-P $20.95 1-210-30-P-C $23.95 8 2.244 2.032 2.469 2.252 0.827 4.417 6.260 8.125 ⅝ 0.781 0.866

115/16˝ 1-210-31-P $20.95 1-210-31-P-C $23.95 8 2.244 2.032 2.469 2.252 0.827 4.417 6.260 8.125 ⅝ 0.781 0.866

2˝ 1-210-32-P $20.95 1-210-32-P-C $23.95 8 2.244 2.032 2.469 2.252 0.827 4.417 6.260 8.125 ⅝ 0.781 0.866

2˝ 1-211-32-P $25.95 1-211-32-P-C $28.95 10 2.362 2.189 2.807 2.500 0.866 4.902 6.772 8.625 ⅝ 0.781 0.866

2⅛˝ 1-211-34-P $25.95 1-211-34-P-C $28.95 10 2.362 2.189 2.807 2.500 0.866 4.902 6.772 8.625 ⅝ 0.781 0.866

23/16˝ 1-211-35-P $25.95 1-211-35-P-C $28.95 10 2.362 2.189 2.807 2.500 0.866 4.902 6.772 8.625 ⅝ 0.781 0.866

2¼˝ 1-212-36-P $30.95 1-212-36-P-C $36.95 12 2.598 2.563 3.059 2.752 0.945 5.394 7.323 9.500 ⅝ 0.781 0.984

2⅜˝ 1-212-38-P $30.95 1-212-38-P-C $36.95 12 2.598 2.563 3.059 2.752 0.945 5.394 7.323 9.500 ⅝ 0.781 0.984

27/16˝ 1-212-39-P $30.95 1-212-39-P-C $36.95 12 2.598 2.563 3.059 2.752 0.945 5.394 7.323 9.500 ⅝ 0.781 0.984

2½˝ 1-213-40-P $40.95 1-213-40-P-C $48.95 16 2.756 2.563 3.374 3.000 1.024 5.866 7.992 10.437 ¾ 1.000 1.188

2¾˝ 1-214-44-P $48.95 1-214-44-P-C $55.95 18 2.835 2.937 3.374 3.126 1.063 6.102 8.268 10.472 ¾ 1.000 1.188

215/16˝ 1-215-47-P $55.95 1-215-47-P-C $65.95 19 2.913 3.063 3.626 3.252 1.102 6.362 8.543 10.813 ¾ 1.000 1.188

3˝ 1-215-48-P $55.95 1-215-48-P-C $60.95 19 2.913 3.063 3.626 3.252 1.102 6.362 8.543 10.813 ¾ 1.000 1.188

Pillow Block Bearings• Brand new 200 series normal duty pillow block bearings. Cast iron construction with self-aligning ball bearing insert and grease zerk.

UCP Series HCP Series Front View Side SideBoth Series UCP HCP

Ball Bearings

• New. Ball bearings with two set screws.Use in pillow block or flange housing (not included).

ITEM Bore Housing Bore thru-lgth. Shpg. Price 1-205-25MM-B 25 mm UC205 34 mm (1.34˝) 1 lb. $ 5.95 1-207-35MM-B 35 mm UC207 43 mm (1.69˝) 2 lbs. $ 7.95 1-209-45MM-B 45 mm UC209 48 mm (1.89˝) 2 lbs. $ 9.95 1-205-16-B 1˝ UC205 1.34˝ 1 lb. $ 5.30 1-206-18-B 1⅛˝ UC206 1½˝ 1 lb. $ 6.95 1-207-22-B 1⅜˝ UC207 1.69˝ 1½ lbs. $ 8.75 1-208-24-B 1½˝ UC208 1.94˝ 3 lbs. $10.95 1-209-27-B 111/16˝ UC209 115/16˝ 2 lbs. $ 9.95

800-488-3407 2 Bolt Flange Bearings 121&

UCFL Series HCFT SeriesTwo Set Screws, No Lock Collar Eccentric Locking Collar w/Set Screws

Dimensions Dimensions

Bore ITEM Price A A1 B H J L Bolt ITEM Price A A1 B H J L Bolt Shpg. ½˝ 1-201-08-2 $ 7.60 1.004 0.433 1.312 2.362 3.543 4.449 ⅜ N/A – – – – – – – 3

⅝˝ 1-202-10-2 $ 7.60 1.004 0.433 1.312 2.362 3.543 4.449 ⅜ N/A – – – – – – – 3

¾˝ 1-204-12-2 $ 7.15 1.004 0.433 1.312 2.362 3.543 4.449 ⅜ 1-204-12-2-C $ 8.60 1.161 0.591 1.791 2.375 3.543 4.429 ⅜ 3

⅞˝ 1-205-14-2 $ 8.00 1.063 0.512 1.405 2.677 3.898 5.118 7/16 1-205-14-2-C $ 9.25 1.181 0.591 1.807 2.756 3.898 4.843 7/16 3

15/16˝ 1-205-15-2 $ 8.00 1.063 0.512 1.405 2.677 3.898 5.118 7/16 1-205-15-2-C $ 9.25 1.181 0.591 1.807 2.756 3.898 4.843 7/16 3

1˝ 1-205-16-2 $ 8.00 1.063 0.512 1.405 2.677 3.898 5.118 7/16 1-205-16-2-C $ 9.25 1.181 0.591 1.807 2.756 3.898 4.843 7/16 3

1⅛˝ 1-206-18-2 $10.95 1.221 0.512 1.583 3.150 4.606 5.827 7/16 1-206-18-2-C $12.00 1.280 0.630 1.972 3.228 4.587 5.591 7/16 4

13/16˝ 1-206-19-2 $10.95 1.221 0.512 1.583 3.150 4.606 5.827 7/16 1-206-19-2-C $12.00 1.280 0.630 1.972 3.228 4.587 5.591 7/16 4

1¼˝ 1-206-20-2 $10.95 1.221 0.512 1.583 3.150 4.606 5.827 7/16 1-206-20-2-C $12.00 1.280 0.630 1.972 3.228 4.587 5.591 7/16 4

1¼˝ 1-207-20-2 $12.95 1.339 0.551 1.748 3.543 5.118 6.339 ½ 1-207-20-2-C $14.95 1.417 0.669 2.098 3.701 5.118 6.221 ½ 5

15/16˝ 1-207-21-2 $12.95 1.339 0.551 1.748 3.543 5.118 6.339 ½ 1-207-21-2-C $14.95 1.417 0.669 2.098 3.701 5.118 6.221 ½ 5

1⅜˝ 1-207-22-2 $12.95 1.339 0.551 1.748 3.543 5.118 6.339 ½ 1-207-22-2-C $14.95 1.417 0.669 2.098 3.701 5.118 6.221 ½ 5

17/16˝ 1-207-23-2 $12.95 1.339 0.551 1.748 3.543 5.118 6.339 ½ 1-207-23-2-C $14.95 1.417 0.669 2.098 3.701 5.118 6.221 ½ 5

1½˝ 1-208-24-2 $15.95 1.417 0.551 2.016 3.937 5.669 6.890 ½ 1-208-24-2-C $15.95 1.535 0.669 2.319 4.055 5.650 6.772 ½ 6

1⅝˝ 1-209-26-2 $15.95 1.496 0.630 2.055 4.252 5.827 7.402 9/16 1-209-26-2-C $17.95 1.575 0.709 2.319 4.252 5.847 7.087 9/16 7

111/16˝ 1-209-27-2 $15.95 1.496 0.630 2.055 4.252 5.827 7.402 9/16 1-209-27-2-C $17.95 1.575 0.709 2.319 4.252 5.847 7.087 9/16 7

1¾˝ 1-209-28-2 $15.95 1.496 0.630 2.055 4.252 5.827 7.402 9/16 1-209-28-2-C $17.95 1.575 0.709 2.319 4.252 5.847 7.087 9/16 7

1⅞˝ 1-210-30-2 $19.95 1.575 0.630 2.150 4.528 6.181 7.756 9/16 1-210-30-2-C $21.95 1.772 0.787 2.602 4.488 6.181 7.480 9/16 8

115/16˝ 1-210-31-2 $19.95 1.575 0.630 2.150 4.528 6.181 7.756 9/16 1-210-31-2-C $21.95 1.772 0.787 2.602 4.488 6.181 7.480 9/16 8

2˝ 1-210-32-2 $19.95 1.575 0.630 2.150 4.528 6.181 7.756 9/16 1-210-32-2-C $21.95 1.772 0.787 2.602 4.488 6.181 7.480 9/16 8

2˝ 1-211-32-2 $23.95 1.693 0.709 2.299 5.118 7.244 8.819 ⅝ 1-211-32-2-C $28.95 1.890 0.827 2.937 5.039 7.244 8.543 ⅝ 9

2⅛˝ 1-211-34-2 $23.95 1.693 0.709 2.299 5.118 7.244 8.819 ⅝ 1-211-34-2-C $28.95 1.890 0.827 2.937 5.039 7.244 8.543 ⅝ 9

23/16˝ 1-211-35-2 $23.95 1.693 0.709 2.299 5.118 7.244 8.819 ⅝ 1-211-35-2-C $28.95 1.890 0.827 2.937 5.039 7.244 8.543 ⅝ 9

2¼˝ 1-212-36-2 $29.95 1.890 0.709 2.704 5.512 7.953 9.843 ⅝ 1-212-36-2-C $34.95 2.087 0.827 3.181 5.433 7.953 9.331 ⅝ 12

2⅜˝ 1-212-38-2 $29.95 1.890 0.709 2.704 5.512 7.953 9.843 ⅝ 1-212-38-2-C $34.95 2.087 0.827 3.181 5.433 7.953 9.331 ⅝ 12

27/16˝ 1-212-39-2 $29.95 1.890 0.709 2.704 5.512 7.953 9.843 ⅝ 1-212-39-2-C $34.95 2.087 0.827 3.181 5.433 7.953 9.331 ⅝ 12

2½˝ 1-213-40-2 $37.95 1.969 0.787 2.744 6.102 8.268 10.158 ¾ N/A – – – – – – – 15

2¾˝ 1-214-44-2 $48.95 2.126 0.787 2.968 6.299 8.504 10.433 ¾ N/A – – – – – – – 17

215/16˝ 1-215-47-2 $54.95 2.205 0.787 3.093 6.496 8.858 10.827 ¾ N/A – – – – – – – 18

3˝ 1-215-48-2 $54.95 2.205 0.787 3.093 6.496 8.858 10.827 ¾ N/A – – – – – – – 18

2 Bolt Flange Bearings• Brand new 200 series normal duty flange bearings. Cast iron construction with self-aligning ball bearing insert and grease zerk.

FlangeBearings

• Brand new. Two bolt stamped steelhousing with sealed self aligning ball bear-ing. Inner race with 2 set screws.

Bolt UsesITEM Bore Centers Bolts Shpg. Price1-3031 ½˝ 2½˝ ¼˝ ½ lb. $6.751-1869 ⅝˝ 2½˝ ¼˝ ½ lb. $5.551-2386 ¾˝ 213/16˝ 5/16˝ ½ lb. $8.701-2387 1˝ 2.992˝ 5/16˝ 1 lb. $8.951-2388 1¼˝ 39/16˝ ⅜˝ 1 lb. $9.20

Special PurchaseCast Iron 2 BoltFlange Bearings

Set Screw, No Lock Collar ITEM Bore Shpg. Price1-207-20-2-S 1¼˝ 5 lbs. $9.951-207-23-2-S 17/16˝ 5 lbs. $9.951-215-47-2-S 215/16˝ 18 lbs. $9.95

Eccentric Locking Collar w/ Set Screw ITEM Bore Shpg. Price1-211-35-2-C-S 23/16˝ 9 lbs. $7.951-212-39-2-C-S 27/16˝ 11 lbs. $8.951-215-47-2-C-S 215/16˝ 18 lbs. $9.95

UCFL Series HCFT Series Front ViewBoth Series Side UCFL Side HCFT

Special PurchaseCast Iron 4 BoltFlangeBearings

Set Screw, No Lock Collar ITEM Bore Shpg. Price1-206-19-4-S 13/16˝ 3 lbs. $8.951-2774 13/16˝ 4 lbs. $8.95

Eccentric Locking Collar w/ Set Screw ITEM Bore Shpg. Price1-2196 50 mm 9 lbs. $9.951-211-35-4-C-S 23/16˝ 9 lbs. $7.95

122 4 Bolt Flange Bearings www.surpluscenter.com8

2.5˝ SphericalBearing

ITEM 1-3729$29.95• New, RBC Model BH4044LSS high mis-alignment heavy duty spherical bearing.Use for hydraulic cylinders with proper sizeend fittings. Includes 2 snap rings to lockin place.SPECIFICATIONS • Load limits• Bore 2.5˝ Static radial 285,000 (lbf)• Inner ring width 2.545˝ Static thrust 62,600 (lbf)• Spherical dia. 3.95˝ Dynamic radial 71,200 (lbf)• Outer ring width 2.062˝ • Shpg. 7 lbs.

UCF Series HCFS SeriesTwo Set Screws, No Lock Collar Eccentric Locking Collar w/Set Screws

Dimensions Dimensions

Bore ITEM Shpg. Price A A1 B J L Bolt ITEM Shpg. Price A A1 B J L Bolt ½˝ 1-201-08-4 3 $ 7.60 1.004 0.433 1.311 2.520 3.386 ⅜ 1-201-08-4-C 3 $ 8.60 1.161 0.591 1.791 2.500 3.386 ⅜

⅝˝ 1-202-10-4 3 $ 7.60 1.004 0.433 1.311 2.520 3.386 ⅜ 1-202-10-4-C 3 $ 8.60 1.161 0.591 1.791 2.500 3.386 ⅜

¾˝ 1-204-12-4 3 $ 7.15 1.004 0.433 1.311 2.520 3.386 ⅜ 1-204-12-4-C 3 $ 8.60 1.161 0.591 1.791 2.500 3.386 ⅜

⅞˝ 1-205-14-4 4 $ 8.00 1.063 0.512 1.406 2.756 3.740 ⅜ 1-205-14-4-C 4 $ 9.25 1.181 0.591 1.807 2.756 3.661 ⅜

15/16˝ 1-205-15-4 4 $ 8.00 1.063 0.512 1.406 2.756 3.740 ⅜ 1-205-15-4-C 4 $ 9.25 1.181 0.591 1.807 2.756 3.661 ⅜

1˝ 1-205-16-4 4 $ 8.00 1.063 0.512 1.406 2.756 3.740 7/16 1-205-16-4-C 4 $ 9.25 1.181 0.591 1.807 2.756 3.661 ⅜

1⅛˝ 1-206-18-4 4 $10.95 1.221 0.512 1.583 3.268 4.252 7/16 1-206-18-4-C 4 $12.00 1.280 0.630 1.972 3.248 4.173 7/16

13/16˝ 1-206-19-4 4 $10.95 1.221 0.512 1.583 3.268 4.252 7/16 1-206-19-4-C 4 $12.00 1.280 0.630 1.972 3.248 4.173 7/16

1¼˝ 1-206-20-4 4 $10.95 1.221 0.512 1.583 3.268 4.252 7/16 1-206-20-4-C 4 $12.00 1.280 0.630 1.972 3.248 4.173 7/16

1¼˝ 1-207-20-4 5 $12.95 1.339 0.591 1.748 3.622 4.606 7/16 1-207-20-4-C 5 $14.95 1.378 0.669 2.098 3.622 4.567 7/16

15/16˝ 1-207-21-4 5 $12.95 1.339 0.591 1.748 3.622 4.606 7/16 1-207-21-4-C 5 $14.95 1.378 0.669 2.098 3.622 4.567 7/16

1⅜˝ 1-207-22-4 5 $12.95 1.339 0.591 1.748 3.622 4.606 7/16 1-207-22-4-C 5 $14.95 1.378 0.669 2.098 3.622 4.567 7/16

17/16˝ 1-207-23-4 5 $12.95 1.339 0.591 1.748 3.622 4.606 7/16 1-207-23-4-C 5 $14.95 1.378 0.669 2.098 3.622 4.567 7/16

1½˝ 1-208-24-4 6 $15.95 1.417 0.591 2.016 4.016 5.118 ½ 1-208-24-4-C 6 $15.95 1.535 0.669 2.319 3.996 5.079 ½

1⅝˝ 1-209-26-4 7 $15.95 1.496 0.630 2.055 4.134 5.394 9/16 1-209-26-4-C 7 $17.95 1.575 0.709 2.319 4.134 5.315 9/16

111/16˝ 1-209-27-4 7 $15.95 1.496 0.630 2.055 4.134 5.394 9/16 1-209-27-4-C 7 $17.95 1.575 0.709 2.319 4.134 5.315 9/16

1¾˝ 1-209-28-4 7 $15.95 1.496 0.630 2.055 4.134 5.394 9/16 1-209-28-4-C 7 $17.95 1.575 0.709 2.319 4.134 5.315 9/16

1⅞˝ 1-210-30-4 7 $19.95 1.575 0.630 2.150 4.370 5.630 9/16 1-210-30-4-C 8 $21.95 1.772 0.787 2.602 4.370 5.630 9/16

115/16˝ 1-210-31-4 7 $19.95 1.575 0.630 2.150 4.370 5.630 9/16 1-210-31-4-C 8 $21.95 1.772 0.787 2.602 4.370 5.630 9/16

2˝ 1-210-32-4 7 $19.95 1.575 0.630 2.150 4.370 5.630 9/16 1-210-32-4-C 8 $21.95 1.772 0.787 2.602 4.370 5.630 9/16

2˝ 1-211-32-4 9 $23.95 1.693 0.709 2.299 5.118 6.378 ⅝ 1-211-32-4-C 10 $28.95 1.929 0.827 2.937 5.118 6.378 ⅝

2⅛˝ 1-211-34-4 9 $23.95 1.693 0.709 2.299 5.118 6.378 ⅝ 1-211-34-4-C 10 $28.95 1.929 0.827 2.937 5.118 6.378 ⅝

23/16˝ 1-211-35-4 9 $23.95 1.693 0.709 2.299 5.118 6.378 ⅝ 1-211-35-4-C 10 $28.95 1.929 0.827 2.937 5.118 6.378 ⅝

2¼˝ 1-212-36-4 11 $29.95 1.890 0.709 2.705 5.630 6.890 ⅝ 1-212-36-4-C 12 $34.95 2.106 0.866 3.181 5.630 6.890 ⅝

2⅜˝ 1-212-38-4 11 $29.95 1.890 0.709 2.705 5.630 6.890 ⅝ 1-212-38-4-C 12 $34.95 2.106 0.866 3.181 5.630 6.890 ⅝

27/16˝ 1-212-39-4 11 $29.95 1.890 0.709 2.705 5.630 6.890 ⅝ 1-212-39-4-C 12 $34.95 2.106 0.866 3.181 5.630 6.890 ⅝

2½˝ 1-213-40-4 13 $37.95 1.969 0.866 2.744 5.866 7.362 ⅝ 1-213-40-4-C 15 $45.95 2.284 0.866 3.528 5.866 7.244 ⅝

2¾˝ 1-214-44-4 15 $48.95 2.126 0.866 2.969 5.984 7.598 11/16 1-214-44-4-C 16 $53.95 2.362 0.906 3.528 5.984 7.402 ⅝

215/16˝ 1-215-47-4 17 $54.95 2.205 0.866 3.091 6.260 7.874 11/16 1-215-47-4-C 18 $60.95 2.441 0.945 3.772 6.000 7.874 ⅝

3˝ 1-215-48-4 17 $54.95 2.205 0.866 3.091 6.260 7.874 11/16 1-215-48-4-C 18 $60.95 2.441 0.945 3.772 6.000 7.874 ⅝

4 Bolt Flange Bearings• Brand new 200 series normal duty flange bearings. Cast iron construction with self-aligning ball bearing insert and grease zerk.

UCF Series HCFS Series Front ViewBoth Series Side UCF Side HCFS

Cast Iron Mounting Bases• Brand new, cast iron mounting base for use withWORLDWIDE right angle gear reducers. Allows gearreducer to be surface mounted. Bolts included.

Reducer FootBolt Hole

ITEM Pattern Pattern Height Footprint Shpg. Price13-133-BASE 3¼˝ x 2˝ 4⅜˝ x 35/16˝ 0.53˝ 5⅜˝ x 4¼˝ 3 lbs. $14.0513-175-BASE 43/16˝ x 2¼˝ 5¾˝ x 4½˝ 0.69˝ 7˝ x 5¾˝ 5 lbs. $17.6013-206-BASE 5˝ x 2⅞˝ 6⅜˝ x 411/16˝ 0.72˝ 7⅞˝ x 6˝ 6 lbs. $21.1013-237-BASE 5˝ x 2⅞˝ 71/16˝ x 4⅞˝ 0.75˝ 8½˝ x 63/16˝ 7 lbs. $24.6513-262-BASE 6⅜˝ x 3¾˝ 8˝ x 5¼˝ 0.75˝ 9⅝˝ x 6⅝˝ 8 lbs. $28.1513-325-BASE 7½˝ x 4˝ 9½˝ x 6⅛˝ 0.87˝ 113/16˝ x 611/16˝ 11 lbs. $31.65

800-488-3407 Right Angle Shaft-to-Shaft Gear Reducers 123&

5

10

15

20

30

40

50

60

ITEM Number ITEM Number Output in. lbs. Overhung 4 Bolt Mount Ratio Left Output Right Output HP RPM Torque Load Input Shaft Output Shaft Centers Shpg. Price 13-133-5-L 13-133-5-R 1.15 350 209 190 ½˝ dia. x 15/16˝ ⅝˝ dia. x 2˝ 3¼˝ x 2˝ 15 lbs. $ 98.45 13-175-5-L 13-175-5-R 2.83 350 499 228 ⅝˝ dia. x 19/16˝ ⅞˝ dia. x 125/32˝ 43/16˝ x 2¾˝ 23 lbs. $118.85 13-206-5-L 13-206-5-R 3.62 350 925 238 ⅝˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 2⅞˝ 28 lbs. $142.30 13-237-5-L 13-237-5-R 4.32 350 766 316 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅜˝ 5˝ x 2⅞˝ 37 lbs. $163.20 13-262-5-L 13-262-5-R 5.24 350 924 333 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅝˝ 6⅜˝ x 3⅜˝ 51 lbs. $200.45 13-325-5-L 13-325-5-R 9.72 350 1724 302 ⅞˝ dia. x 27/16˝ 1⅜˝ dia. x 3¼˝ 7½˝ x 4˝ 82 lbs. $282.55 13-133-10-L 13-133-10-R 0.77 175 247 220 ½˝ dia. x 15/16˝ ⅝˝ dia. x 2˝ 3¼˝ x 2˝ 15 lbs. $ 98.45 13-175-10-L 13-175-10-R 1.57 175 515 272 ⅝˝ dia. x 19/16˝ ⅞˝ dia. x 125/32˝ 43/16˝ x 2¾˝ 23 lbs. $118.85 13-206-10-L 13-206-10-R 2.77 175 935 283 ⅝˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 2⅞˝ 28 lbs. $142.30 13-237-10-L 13-237-10-R 3.47 175 1158 378 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅜˝ 5˝ x 2⅞˝ 37 lbs. $163.20 13-262-10-L 13-262-10-R 4.17 175 1445 398 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅝˝ 6⅜˝ x 3⅜˝ 51 lbs. $200.45 13-325-10-L 13-325-10-R 7.19 175 2419 369 ⅞˝ dia. x 27/16˝ 1⅜˝ dia. x 3¼˝ 7½˝ x 4˝ 82 lbs. $282.55 13-133-15-L 13-133-15-R 0.63 120 283 254 ½˝ dia. x 15/16˝ ⅝˝ dia. x 2˝ 3¼˝ x 2˝ 15 lbs. $ 98.45 13-175-15-L 13-175-15-R 1.24 120 554 324 ⅝˝ dia. x 19/16˝ ⅞˝ dia. x 125/32˝ 43/16˝ x 2¾˝ 23 lbs. $118.85 13-206-15-L 13-206-15-R 2.09 120 1002 337 ⅝˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 2⅞˝ 28 lbs. $142.30 13-237-15-L 13-237-15-R 2.64 120 1249 451 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅜˝ 5˝ x 2⅞˝ 37 lbs. $163.20 13-262-15-L 13-262-15-R 3.22 120 1577 475 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅝˝ 6⅜˝ x 3⅜˝ 51 lbs. $200.45 13-325-15-L 13-325-15-R 5.45 120 2611 450 ⅞˝ dia. x 27/16˝ 1⅜˝ dia. x 3¼˝ 7½˝ x 4˝ 82 lbs. $282.55 13-133-20-L 13-133-20-R 0.50 88 276 254 ½˝ dia. x 15/16˝ ⅝˝ dia. x 2˝ 3¼˝ x 2˝ 15 lbs. $ 98.45 13-175-20-L 13-175-20-R 1.26 88 737 378 ⅝˝ dia. x 19/16˝ ⅞˝ dia. x 125/32˝ 43/16˝ x 2¾˝ 23 lbs. $118.85 13-206-20-L 13-206-20-R 1.57 88 914 394 ⅝˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 2⅞˝ 28 lbs. $142.30 13-237-20-L 13-237-20-R 2.06 88 1195 530 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅜˝ 5˝ x 2⅞˝ 37 lbs. $163.20 13-262-20-L 13-262-20-R 2.67 88 1563 558 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅝˝ 6⅜˝ x 3⅜˝ 51 lbs. $200.45 13-325-20-L 13-325-20-R 4.74 88 2875 526 ⅞˝ dia. x 27/16˝ 1⅜˝ dia. x 3¼˝ 7½˝ x 4˝ 82 lbs. $282.55 13-133-30-L 13-133-30-R 0.47 58 336 254 ½˝ dia. x 15/16˝ ⅝˝ dia. x 2˝ 3¼˝ x 2˝ 15 lbs. $ 98.45 13-175-30-L 13-175-30-R 0.89 58 666 419 ⅝˝ dia. x 19/16˝ ⅞˝ dia. x 125/32˝ 43/16˝ x 2¾˝ 23 lbs. $118.85 13-206-30-L 13-206-30-R 1.65 58 1310 436 ⅝˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 2⅞˝ 28 lbs. $142.30 13-237-30-L 13-237-30-R 1.82 58 1507 581 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅜˝ 5˝ x 2⅞˝ 37 lbs. $163.20 13-262-30-L 13-262-30-R 2.22 58 1827 612 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅝˝ 6⅜˝ x 3⅜˝ 51 lbs. $200.45 13-325-30-L 13-325-30-R 3.66 58 3045 585 ⅞˝ dia. x 27/16˝ 1⅜˝ dia. x 3¼˝ 7½˝ x 4˝ 82 lbs. $282.55 13-133-40-L 13-133-40-R 0.38 44 356 254 ½˝ dia. x 15/16˝ ⅝˝ dia. x 2˝ 3¼˝ x 2˝ 15 lbs. $ 98.45 13-175-40-L 13-175-40-R 0.79 44 714 495 ⅝˝ dia. x 19/16˝ ⅞˝ dia. x 125/32˝ 43/16˝ x 2¾˝ 23 lbs. $118.85 13-206-40-L 13-206-40-R 1.09 44 1120 515 ⅝˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 2⅞˝ 28 lbs. $142.30 13-237-40-L 13-237-40-R 1.45 44 1483 684 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅜˝ 5˝ x 2⅞˝ 37 lbs. $163.20 13-262-40-L 13-262-40-R 1.85 44 1919 720 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅝˝ 6⅜˝ x 3⅜˝ 51 lbs. $200.45 13-325-40-L 13-325-40-R 3.35 44 3692 697 ⅞˝ dia. x 27/16˝ 1⅜˝ dia. x 3¼˝ 7½˝ x 4˝ 82 lbs. $282.55 13-133-50-L 13-133-50-R 0.29 35 312 254 ½˝ dia. x 15/16˝ ⅝˝ dia. x 2˝ 3¼˝ x 2˝ 15 lbs. $ 98.45 13-175-50-L 13-175-50-R 0.50 35 538 564 ⅝˝ dia. x 19/16˝ ⅞˝ dia. x 125/32˝ 43/16˝ x 2¾˝ 23 lbs. $118.85 13-206-50-L 13-206-50-R 0.74 35 830 587 ⅝˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 2⅞˝ 28 lbs. $142.30 13-237-50-L 13-237-50-R 1.32 35 1527 763 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅜˝ 5˝ x 2⅞˝ 37 lbs. $163.20 13-262-50-L 13-262-50-R 1.37 35 1658 803 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅝˝ 6⅜˝ x 3⅜˝ 51 lbs. $200.45 13-325-50-L 13-325-50-R 2.49 35 3413 803 ⅞˝ dia. x 27/16˝ 1⅜˝ dia. x 3¼˝ 7½˝ x 4˝ 82 lbs. $282.55 13-133-60-L 13-133-60-R 0.23 29 158 254 ½˝ dia. x 15/16˝ ⅝˝ dia. x 2˝ 3¼˝ x 2˝ 15 lbs. $ 98.45 13-175-60-L 13-175-60-R 0.38 29 433 613 ⅝˝ dia. x 19/16˝ ⅞˝ dia. x 125/32˝ 43/16˝ x 2¾˝ 23 lbs. $118.85 13-206-60-L 13-206-60-R 0.60 29 750 639 ⅝˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 2⅞˝ 28 lbs. $142.30 13-237-60-L 13-237-60-R 0.86 29 1149 838 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅜˝ 5˝ x 2⅞˝ 37 lbs. $163.20 13-262-60-L 13-262-60-R 1.16 29 1670 882 ¾˝ dia. x 2˝ 1⅛˝ dia. x 2⅝˝ 6⅜˝ x 3⅜˝ 51 lbs. $200.45 13-325-60-L 13-325-60-R 2.03 29 3127 882 ⅞˝ dia. x 27/16˝ 1⅜˝ dia. x 3¼˝ 7½˝ x 4˝ 82 lbs. $282.55

Shaft to Shaft Gearboxes• Brand new, WORLDWIDE ELECTRIC right-angle worm gear reducers.• Cast iron housing. Four tapped mounting holes on top and bottomof case. Rated for 1750 RPM maximum input speed. Keyed input andoutput shafts.• Shipped filled with oil. Mounting bases sold separately, available onour website.

Right Output Left Output

124 Motor Mount Gear Reducers www.surpluscenter.com8 800-488-3407 Motor Mount Gear Reducers 125&

5

10

15

20

30

40

50

60

Left Output Right Output Dual Output Hollow Output Output Output Overhung Output 4 Bolt Mnt Ratio ITEM Number ITEM Number ITEM Number Price ITEM Number Price HP RPM Torque Load Input Bore Left, Right, Dual Hollow Bore Centers Shpg. 13-133-5-L-56C 13-133-5-R-56C 13-133-5-DE-56C $114.25 N/A 1.15 350 209 190 ⅝˝ ⅝˝ dia. x 2˝ — 3¼˝ x 2˝ 20 lbs. 13-175-5-L-56C 13-175-5-R-56C 13-175-5-DE-56C $138.20 13-175-5-H-56C $182.60 2.83 350 499 228 ⅝˝ ⅞˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 2¾˝ 30 lbs. 13-206-5-L-56C 13-206-5-R-56C 13-206-5-DE-56C $175.45 13-206-5-H-56C $218.80 3.62 350 925 238 ⅝˝ 1˝ dia. x 23/32˝ 1⅛˝ dia. x 67/16˝ 5˝ x 2⅞˝ 35 lbs. 13-237-5-L-56C 13-237-5-R-56C 13-237-5-DE-56C $211.15 13-237-5-H-56C $249.90 4.32 350 766 316 ⅝˝ 1⅛˝ dia. x 2⅜˝ 1¼˝ dia. x 67/16˝ 5˝ x 2⅞˝ 41 lbs. 13-262-5-L-182TC 13-262-5-R-182TC 13-262-5-DE-182TC $227.45 13-262-5-H-182TC $307.55 5.24 350 924 333 1⅛˝ 1⅛˝ dia. x 2⅝˝ 17/16˝ dia. x 7˝ 6⅜˝ x 3⅜˝ 56 lbs. 13-325-5-L-184TC 13-325-5-R-184TC 13-325-5-DE-184TC $321.30 13-325-5-H-184TC $413.15 9.72 350 1724 302 1⅛˝ 1⅜˝ dia. x 3¼˝ 115/16˝ dia. x 8¾˝ 7½˝ x 4˝ 93 lbs. 13-133-10-L-56C 13-133-10-R-56C 13-133-10-DE-56C $114.25 N/A 0.77 175 247 220 ⅝˝ ⅝˝ dia. x 2˝ — 3¼˝ x 2˝ 20 lbs. 13-175-10-L-56C 13-175-10-R-56C 13-175-10-DE-56C $138.20 13-175-10-H-56C $182.60 1.57 175 515 272 ⅝˝ ⅞˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 2¾˝ 30 lbs. 13-206-10-L-56C 13-206-10-R-56C 13-206-10-DE-56C $175.45 13-206-10-H-56C $218.80 2.77 175 935 283 ⅝˝ 1˝ dia. x 23/32˝ 1⅛˝ dia. x 67/16˝ 5˝ x 2⅞˝ 35 lbs. 13-237-10-L-56C 13-237-10-R-56C 13-237-10-DE-56C $211.15 13-237-10-H-56C $249.90 3.47 175 1158 378 ⅝˝ 1⅛˝ dia. x 2⅜˝ 1¼˝ dia. x 67/16˝ 5˝ x 2⅞˝ 41 lbs. 13-262-10-L-182TC 13-262-10-R-182TC 13-262-10-DE-182TC $227.45 13-262-10-H-182TC $307.55 4.17 175 1445 398 1⅛˝ 1⅛˝ dia. x 2⅝˝ 17/16˝ dia. x 7˝ 6⅜˝ x 3⅜˝ 56 lbs. 13-325-10-L-184TC 13-325-10-R-184TC 13-325-10-DE-184TC $321.30 13-325-10-H-184TC $413.15 7.19 175 2419 369 1⅛˝ 1⅜˝ dia. x 3¼˝ 115/16˝ dia. x 8¾˝ 7½˝ x 4˝ 93 lbs. 13-133-15-L-56C 13-133-15-R-56C 13-133-15-DE-56C $114.25 N/A 0.63 120 283 254 ⅝˝ ⅝˝ dia. x 2˝ — 3¼˝ x 2˝ 20 lbs. 13-175-15-L-56C 13-175-15-R-56C 13-175-15-DE-56C $138.20 13-175-15-H-56C $182.60 1.57 120 554 324 ⅝˝ ⅞˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 2¾˝ 30 lbs. 13-206-15-L-56C 13-206-15-R-56C 13-206-15-DE-56C $175.45 13-206-15-H-56C $218.80 2.09 120 1002 337 ⅝˝ 1˝ dia. x 23/32˝ 1⅛˝ dia. x 67/16˝ 5˝ x 2⅞˝ 35 lbs. 13-237-15-L-56C 13-237-15-R-56C 13-237-15-DE-56C $211.15 13-237-15-H-56C $249.90 2.64 120 1249 451 ⅝˝ 1⅛˝ dia. x 2⅜˝ 1¼˝ dia. x 67/16˝ 5˝ x 2⅞˝ 41 lbs. 13-262-15-L-56C 13-262-15-R-56C 13-262-15-DE-56C $227.45 13-262-15-H-56C $307.55 3.22 120 1577 475 ⅝˝ 1⅛˝ dia. x 2⅝˝ 17/16˝ dia. x 7˝ 6⅜˝ x 3⅜˝ 56 lbs. 13-262-15-L-145TC 13-262-15-R-145TC 13-262-15-DE-145TC $227.45 13-262-15-H-145TC $307.55 3.22 120 1577 475 ⅞˝ 1⅛˝ dia. x 2⅝˝ 17/16˝ dia. x 7˝ 6⅜˝ x 3⅜˝ 56 lbs. 13-325-15-L-182TC 13-325-15-R-182TC 13-325-15-DE-182TC $321.30 13-325-15-H-182TC $413.15 5.45 120 2611 450 1⅛˝ 1⅜˝ dia. x 3¼˝ 115/16˝ dia. x 8¾˝ 7½˝ x 4˝ 93 lbs. 13-133-20-L-56C 13-133-20-R-56C 13-133-20-DE-56C $114.25 N/A 0.50 88 276 254 ⅝˝ ⅝˝ dia. x 2˝ — 3¼˝ x 2˝ 20 lbs. 13-175-20-L-56C 13-175-20-R-56C 13-175-20-DE-56C $138.20 13-175-20-H-56C $182.60 1.26 88 737 378 ⅝˝ ⅞˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 2¾˝ 30 lbs. 13-206-20-L-56C 13-206-20-R-56C 13-206-20-DE-56C $175.45 13-206-20-H-56C $218.80 1.57 88 914 394 ⅝˝ 1˝ dia. x 23/32˝ 1⅛˝ dia. x 67/16˝ 5˝ x 2⅞˝ 35 lbs. 13-237-20-L-56C 13-237-20-R-56C 13-237-20-DE-56C $211.15 13-237-20-H-56C $249.90 2.06 88 1195 530 ⅝˝ 1⅛˝ dia. x 2⅜˝ 1¼˝ dia. x 67/16˝ 5˝ x 2⅞˝ 41 lbs. 13-262-20-L-56C 13-262-20-R-56C 13-262-20-DE-56C $227.45 13-262-20-H-56C $307.55 2.67 88 1563 558 ⅝˝ 1⅛˝ dia. x 2⅝˝ 17/16˝ dia. x 7˝ 6⅜˝ x 3⅜˝ 56 lbs. 13-262-20-L-145TC 13-262-20-R-145TC 13-262-20-DE-145TC $227.45 13-262-20-H-145TC $307.55 2.67 88 1563 558 ⅞˝ 1⅛˝ dia. x 2⅝˝ 17/16˝ dia. x 7˝ 6⅜˝ x 3⅜˝ 56 lbs. 13-325-20-L-182TC 13-325-20-R-182TC 13-325-20-DE-182TC $321.30 13-325-20-H-182TC $413.15 4.74 88 2875 526 1⅛˝ 1⅜˝ dia. x 3¼˝ 115/16˝ dia. x 8¾˝ 7½˝ x 4˝ 93 lbs. 13-133-30-L-56C 13-133-30-R-56C 13-133-30-DE-56C $114.25 N/A 0.47 58 336 254 ⅝˝ ⅝˝ dia. x 2˝ — 3¼˝ x 2˝ 20 lbs. 13-175-30-L-56C 13-175-30-R-56C 13-175-30-DE-56C $138.20 13-175-30-H-56C $182.60 0.89 58 666 419 ⅝˝ ⅞˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 2¾˝ 30 lbs. 13-206-30-L-56C 13-206-30-R-56C 13-206-30-DE-56C $175.45 13-206-30-H-56C $218.80 1.65 58 1310 436 ⅝˝ 1˝ dia. x 23/32˝ 1⅛˝ dia. x 67/16˝ 5˝ x 2⅞˝ 35 lbs. 13-237-30-L-56C 13-237-30-R-56C 13-237-30-DE-56C $211.15 13-237-30-H-56C $249.90 1.82 58 1507 581 ⅝˝ 1⅛˝ dia. x 2⅜˝ 1¼˝ dia. x 67/16˝ 5˝ x 2⅞˝ 41 lbs. 13-262-30-L-56C 13-262-30-R-56C 13-262-30-DE-56C $227.45 13-262-30-H-56C $307.55 2.22 58 1827 612 ⅝˝ 1⅛˝ dia. x 2⅝˝ 17/16˝ dia. x 7˝ 6⅜˝ x 3⅜˝ 53 lbs. 13-262-30-L-145TC 13-262-30-R-145TC 13-262-30-DE-145TC $227.45 13-262-30-H-145TC $307.55 2.22 58 1827 612 ⅞˝ 1⅛˝ dia. x 2⅝˝ 17/16˝ dia. x 7˝ 6⅜˝ x 3⅜˝ 53 lbs. 13-325-30-L-56C 13-325-30-R-56C 13-325-30-DE-56C $321.30 13-325-30-H-56C $413.15 3.66 58 3045 585 ⅝˝ 1⅜˝ dia. x 3¼˝ 115/16˝ dia. x 8¾˝ 7½˝ x 4˝ 90 lbs. 13-325-30-L-145TC 13-325-30-R-145TC 13-325-30-DE-145TC $321.30 13-325-30-H-145TC $413.15 3.66 58 3045 585 ⅞˝ 1⅜˝ dia. x 3¼˝ 115/16˝ dia. x 8¾˝ 7½˝ x 4˝ 90 lbs. 13-133-40-L-56C 13-133-40-R-56C 13-133-40-DE-56C $114.25 N/A 0.38 44 356 254 ⅝˝ ⅝˝ dia. x 2˝ — 3¼˝ x 2˝ 20 lbs. 13-175-40-L-56C 13-175-40-R-56C 13-175-40-DE-56C $138.20 13-175-40-H-56C $182.60 0.79 44 714 495 ⅝˝ ⅞˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 2¾˝ 30 lbs. 13-206-40-L-56C 13-206-40-R-56C 13-206-40-DE-56C $175.45 13-206-40-H-56C $218.80 1.09 44 1120 515 ⅝˝ 1˝ dia. x 23/32˝ 1⅛˝ dia. x 67/16˝ 5˝ x 2⅞˝ 35 lbs. 13-237-40-L-56C 13-237-40-R-56C 13-237-40-DE-56C $211.15 13-237-40-H-56C $249.90 1.45 44 1483 684 ⅝˝ 1⅛˝ dia. x 2⅜˝ 1¼˝ dia. x 67/16˝ 5˝ x 2⅞˝ 41 lbs. 13-262-40-L-56C 13-262-40-R-56C 13-262-40-DE-56C $227.45 13-262-40-H-56C $307.55 1.85 44 1919 720 ⅝˝ 1⅛˝ dia. x 2⅝˝ 17/16˝ dia. x 7˝ 6⅜˝ x 3⅜˝ 53 lbs. 13-325-40-L-56C 13-325-40-R-56C 13-325-40-DE-56C $321.30 13-325-40-H-56C $413.15 3.35 44 3692 697 ⅝˝ 1⅜˝ dia. x 3¼˝ 115/16˝ dia. x 8¾˝ 7½˝ x 4˝ 90 lbs. 13-325-40-L-145TC 13-325-40-R-145TC 13-325-40-DE-145TC $321.30 13-325-40-H-145TC $413.15 3.35 44 3692 697 ⅞˝ 1⅜˝ dia. x 3¼˝ 115/16˝ dia. x 8¾˝ 7½˝ x 4˝ 90 lbs. 13-133-50-L-56C 13-133-50-R-56C 13-133-50-DE-56C $114.25 N/A 0.29 35 312 254 ⅝˝ ⅝˝ dia. x 2˝ — 3¼˝ x 2˝ 20 lbs. 13-175-50-L-56C 13-175-50-R-56C 13-175-50-DE-56C $138.20 13-175-50-H-56C $182.60 0.50 35 538 564 ⅝˝ ⅞˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 2¾˝ 30 lbs. 13-206-50-L-56C 13-206-50-R-56C 13-206-50-DE-56C $175.45 13-206-50-H-56C $218.80 0.74 35 830 587 ⅝˝ 1˝ dia. x 23/32˝ 1⅛˝ dia. x 67/16˝ 5˝ x 2⅞˝ 35 lbs. 13-237-50-L-56C 13-237-50-R-56C 13-237-50-DE-56C $211.15 13-237-50-H-56C $249.90 1.32 35 1527 763 ⅝˝ 1⅛˝ dia. x 2⅜˝ 1¼˝ dia. x 67/16˝ 5˝ x 2⅞˝ 41 lbs. 13-262-50-L-56C 13-262-50-R-56C 13-262-50-DE-56C $227.45 13-262-50-H-56C $307.55 1.37 35 1658 803 ⅝˝ 1⅛˝ dia. x 2⅝˝ 17/16˝ dia. x 7˝ 6⅜˝ x 3⅜˝ 53 lbs. 13-325-50-L-56C 13-325-50-R-56C 13-325-50-DE-56C $321.30 13-325-50-H-56C $413.15 2.49 35 3413 803 ⅝˝ 1⅜˝ dia. x 3¼˝ 115/16˝ dia. x 8¾˝ 7½˝ x 4˝ 90 lbs. 13-325-50-L-145TC 13-325-50-R-145TC 13-325-50-DE-145TC $321.30 13-325-50-H-145TC $413.15 2.49 35 3413 803 ⅞˝ 1⅜˝ dia. x 3¼˝ 115/16˝ dia. x 8¾˝ 7½˝ x 4˝ 90 lbs. 13-133-60-L-56C 13-133-60-R-56C 13-133-60-DE-56C $114.25 N/A 0.23 29 158 254 ⅝˝ ⅝˝ dia. x 2˝ — 3¼˝ x 2˝ 20 lbs. 13-175-60-L-56C 13-175-60-R-56C 13-175-60-DE-56C $138.20 13-175-60-H-56C $182.60 0.38 29 433 613 ⅝˝ ⅞˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 2¾˝ 30 lbs. 13-206-60-L-56C 13-206-60-R-56C 13-206-60-DE-56C $175.45 13-206-60-H-56C $218.80 0.60 29 750 639 ⅝˝ 1˝ dia. x 23/32˝ 1⅛˝ dia. x 67/16˝ 5˝ x 2⅞˝ 35 lbs. 13-237-60-L-56C 13-237-60-R-56C 13-237-60-DE-56C $211.15 13-237-60-H-56C $249.90 0.86 29 1149 838 ⅝˝ 1⅛˝ dia. x 2⅜˝ 1¼˝ dia. x 67/16˝ 5˝ x 2⅞˝ 41 lbs. 13-262-60-L-56C 13-262-60-R-56C 13-262-60-DE-56C $227.45 13-262-60-H-56C $307.55 1.16 29 1670 882 ⅝˝ 1⅛˝ dia. x 2⅝˝ 17/16˝ dia. x 7˝ 6⅜˝ x 3⅜˝ 53 lbs. 13-325-60-L-56C 13-325-60-R-56C 13-325-60-DE-56C $321.30 13-325-60-H-56C $413.15 2.03 29 3127 882 ⅝˝ 1⅜˝ dia. x 3¼˝ 115/16˝ dia. x 8¾˝ 7½˝ x 4˝ 90 lbs. 13-325-60-L-145TC 13-325-60-R-145TC 13-325-60-DE-145TC $321.30 13-325-60-H-145TC $413.15 2.03 29 3127 882 ⅞˝ 1⅜˝ dia. x 3¼˝ 115/16˝ dia. x 8¾˝ 7½˝ x 4˝ 90 lbs.

• Brand new, WORLDWIDE ELECTRIC right-angle worm gear reducers. Standard NEMA-C motor mounting flange. Cast iron hous-ing. Four tapped mounting holes on top and bottom of case. Keyed input and outputs. Shipped filled with oil. Max. input 1750 RPM.

Item number suffix indicates electric motor frame.

Select gear reducer by output speed, torque and power required, then choose between left, right, dual or hollow output shafts.Mounting bases sold separately.You can find them on page 116.

Left Output

Right Output

Dual Output

Hollow Output

• Brand new, WORLDWIDE ELECTRIC right-angle worm gear reducers. Standard NEMA-C motor mounting flange. Cast iron hous-ing. Four tapped mounting holes on top and bottom of case. Keyed input and outputs. Shipped filled with oil. Max. input 1750 RPM.

Item number suffix indicates electric motor frame.

Select gear reducer by output speed, torque and power required, then choose between left, right, dual or hollow output shafts.

126 Worldwide Helical Inline Speed Reducers www.surpluscenter.com8

Box Size 37 • Output shaft 1˝ dia. x 1.97˝ long, ¼˝ wide keyway, shaft end tapped ⅜˝-16 • Base mount four 0.35˝ holes on 5.12˝ x 4.33˝ ctrs.

Output RPM Input Output Over-Hung Nominal Actual at 1800 RPM HP Torque Load Motor Service ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price 13-1552-10-145TC 10:1 10.02 175 2 680 388 145TC 2 III 31 lbs. $360.00 13-1552-15-145TC-3 15:1 14.08 124 2 1016 436 145TC 3 II 31 lbs. $360.00 13-1552-15-145TC 15:1 15.75 111 2 1070 451 145TC 2 II 31 lbs. $360.00 13-1552-20-56C 20:1 19.95 88 1 680 489 56C 2 III 31 lbs. $360.00 13-1552-20-145TC 20:1 19.95 88 2 1355 489 145TC 2 I 31 lbs. $360.00 13-1552-30-56C 30:1 31.02 56 1 1025 565 56C 3 II 31 lbs. $360.00 13-1552-40-56C 40:1 40.08 44 1 1325 615 56C 3 I 31 lbs. $360.00 13-1552-50-56C 50:1 52.24 33 1 1725 670 56C 3 I 31 lbs. $360.00 13-1552-60-56C 60:1 60.84 29 0.89 1770 705 56C 3 I * 31 lbs. $360.00

Box Size 47 • Output shaft 1.25˝ dia. x 2.36˝ long, ¼˝ wide keyway, shaft end tapped ½˝-13 • Base mount four 0.55˝ holes on 6.5˝ x 5.31˝ ctrs.

Output RPM Input Output Over-Hung Truck Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price 13-1553-10-182TC 10:1 11.27 155 3 1150 590 182TC 2 II 50 lbs. $414.00 13-1553-15-182TC 15:1 15.18 115 3 1555 650 182TC 2 II 50 lbs. $414.00 13-1553-20-145TC 20:1 18.37 95 2 1250 690 145TC 2 III 50 lbs. $414.00 13-1553-20-182TC 20:1 18.37 95 3 1880 690 182TC 2 I 50 lbs. $414.00 13-1553-30-145TC 30:1 31.83 55 2 2105 835 145TC 3 I 50 lbs. $414.00 13-1553-30-182TC 30:1 31.83 55 3 3250 835 182TC 3 I * 50 lbs. $414.00 13-1553-40-56C 40:1 41.51 42 1 1370 910 56C 3 III 50 lbs. $414.00 13-1553-50-56C 50:1 52.84 33 1 1740 985 56C 3 II 50 lbs. $414.00 13-1553-60-56C 60:1 63.37 28 1 2095 1050 56C 3 I 50 lbs. $414.00

Box Size 67 • Output shaft 1.375˝ dia. x 2.76˝ long, 5/16˝ wide keyway, shaft end tapped ½˝-13 • Base mount four 0.55˝ holes on 7.68˝ x 5.91˝ ctrs.

Output RPM Input Output Over-Hung Truck Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price 13-1554-10-184TC 10:1 9.9 177 5 1685 880 184TC 2 III 73 lbs. $588.00 13-1554-20-182TC 20:1 22.9 76 3 2270 1165 182TC 3 III 73 lbs. $588.00 13-1554-30-145TC 30:1 32.02 55 2 2115 1305 145TC 3 III 73 lbs. $588.00 13-1554-40-145TC 40:1 41.22 42 2 2725 1420 145TC 3 II 73 lbs. $588.00 13-1554-50-145TC 50:1 52.21 34 2 3400 1480 145TC 3 I 73 lbs. $588.00 13-1554-60-56C 60:1 63.07 28 1 2085 1480 56C 3 III 73 lbs. $588.00 13-1554-80-56C 80:1 78.59 22 1 2590 1480 56C 3 II 73 lbs. $588.00 13-1554-100-56C 100:1 98.69 18 1 3260 1480 56C 3 II 73 lbs. $588.00 13-1554-120-56C 120:1 125.28 14 1 4140 1480 56C 3 I 73 lbs. $588.00

• Brand new, WORLDWIDE ELECTRIC helical inline speed reducers. Cast iron housings. Drop-in replacement formost major inline reducer brands. Gearbox flanges are designed to accept NEMA C-Face electric motors.

• Dimensional drawings and additional information available at www.surpluscenter.com.

These speed reducers are not stocked at Surplus Center; they drop-ship directly from our vendor's warehouse.

Pictures RepresentBox Size 37

DROP SHIP

800-488-3407 Worldwide Helical Inline Speed Reducers 127&

Box Size 77 • Output shaft 1.625˝ dia. x 3.15˝ long, ⅜˝ wide keyway, shaft end tapped ⅝˝-11 • Base mount four 0.71˝ holes on 8.07˝ x 6.69˝ ctrs.

Output RPM Input Output Over-Hung Truck Nominal Actual at 1800 RPM HP Torque Load Motor Service ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price 13-1555-10-213TC 10:1 10.91 160 7.5 2795 1035 213TC 2 III 83 lbs. $690.00 13-1555-20-182TC 20:1 23.31 75 3 2385 1330 182TC 2 III 83 lbs. $690.00 13-1555-30-182TC 30:1 31.97 55 3 3155 1480 182TC 3 III 83 lbs. $690.00 13-1555-40-182TC 40:1 39.31 45 3 3855 1555 182TC 3 II 83 lbs. $690.00 13-1555-50-145TC 50:1 53.24 33 2 3505 1755 145TC 3 II 83 lbs. $690.00 13-1555-60-145TC 60:1 57.73 30 2 3855 1800 145TC 3 II 83 lbs. $690.00 13-1555-80-145TC 80:1 84.62 21 2 5510 1935 145TC 3 I 83 lbs. $690.00 13-1555-100-145TC 100:1 89.8 19 2 6090 1935 145TC 3 I 83 lbs. $690.00 13-1555-120-56C 120:1 124.34 14 1 4130 1935 56C 3 II 83 lbs. $690.00

Box Size 87 • Output shaft 2.125˝ dia. x 3.94˝ long, ½˝ wide keyway, shaft end tapped ¾˝-10 • Base mount four 0.71˝ holes on 10.24˝ x 8.46˝ ctrs.

Output RPM Input Output Over-Hung Truck Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price 13-1556-10-213TC 10:1 10.66 164 7.5 2725 2375 213TC 2 III 171 lbs. $1059.00 13-1556-10-215TC 10:1 10.66 164 10 3635 2375 215TC 2 III 171 lbs. $1059.00 13-1556-20-184TC 20:1 20.06 87 5 3325 2925 184TC 3 III 171 lbs. $1059.00 13-1556-20-213TC 20:1 20.06 87 7.5 4985 2925 213TC 3 III 171 lbs. $1059.00 13-1556-30-184TC 30:1 31.73 55 5 5260 3010 184TC 3 III 171 lbs. $1059.00 13-1556-40-184TC 40:1 38.2 46 5 6290 3010 184TC 3 III 171 lbs. $1059.00 13-1556-50-145TC 50:1 49.16 36 2 3215 3010 145TC 3 III 171 lbs. $1059.00 13-1556-50-184TC 50:1 49.16 36 5 8035 3010 184TC 3 II 171 lbs. $1059.00 13-1556-60-145TC 60:1 61.54 28 2 4130 3010 145TC 3 III 171 lbs. $1059.00 13-1556-60-182TC 60:1 61.54 28 3 6200 3010 182TC 3 III 171 lbs. $1059.00 13-1556-80-145TC 80:1 87.27 20 2 5785 3010 145TC 3 III 171 lbs. $1059.00 13-1556-80-182TC 80:1 87.27 20 3 8680 3010 182TC 3 II 171 lbs. $1059.00 13-1556-110-145TC 110:1 112.52 16 2 7230 3010 145TC 3 II 171 lbs. $1059.00 13-1556-120-145TC 120:1 122.17 14 2 8265 3010 145TC 3 II 171 lbs. $1059.00

Box Size 97 • Output shaft 2.375˝ dia. x 4.72˝ long, ⅝˝ wide keyway, shaft end tapped ¾˝-11 • Base mount four 0.87˝ holes on 12.2˝ x 9.84˝ ctrs.

Output RPM Input Output Over-Hung Truck Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price 13-1557-10-284TC 10:1 10 175 25 8520 2430 284TC 2 III 255 lbs. $1719.00 13-1557-10-286TC 10:1 10 175 30 10225 2430 286TC 2 II 255 lbs. $1719.00 13-1557-20-254TC 20:1 21.23 82 15 10910 3125 254TC 2 III 255 lbs. $1719.00 13-1557-20-256TC 20:1 21.23 82 20 14450 3125 256TC 2 II 255 lbs. $1719.00 13-1557-30-213TC 30:1 28.98 60 7.5 7230 3465 213TC 3 III 255 lbs. $1719.00 13-1557-30-215TC 30:1 28.98 60 10 9645 3465 215TC 3 III 255 lbs. $1719.00 13-1557-30-254TC 30:1 28.98 60 15 14465 3465 254TC 3 II 255 lbs. $1719.00 13-1557-40-213TC 40:1 44.57 39 7.5 11125 4000 213TC 3 III 255 lbs. $1719.00 13-1557-40-215TC 40:1 44.57 39 10 14835 4000 215TC 3 II 255 lbs. $1719.00 13-1557-50-213TC 50:1 51.1 34 7.5 12765 4080 213TC 3 III 255 lbs. $1719.00 13-1557-50-215TC 50:1 51.1 34 10 17020 4080 215TC 3 II 255 lbs. $1719.00 13-1557-60-213TC 60:1 59.52 29 7.5 14965 4080 213TC 3 II 255 lbs. $1719.00 13-1557-80-184TC 80:1 82.59 21 5 13775 4080 184TC 3 II 255 lbs. $1719.00 13-1557-80-213TC 80:1 82.59 21 7.5 20665 4080 213TC 3 I 255 lbs. $1719.00 13-1557-100-184TC 100:1 97.76 18 5 16070 4080 184TC 3 II 255 lbs. $1719.00 13-1557-120-182TC 120:1 127.61 14 3 12400 4080 182TC 3 III 255 lbs. $1719.00

Pictures Represent Box Size 87

• Brand new, WORLDWIDE ELECTRIC helical inline speed reducers. Castiron housings. Drop-in replacement for most major inline reducer brands.Gearbox flanges are designed to accept NEMA C-Face electric motors.

• Dimensional drawings and additional information available at www.sur-pluscenter.com.

These speed reducers are not stocked at Surplus Center; they drop-ship directlyfrom our vendor's warehouse.

128 Worldwide Helical Inline Speed Reducers www.surpluscenter.com8

Box Size 107 • Output shaft 2.875˝ dia. x 5.51˝ long, ¾˝ wide keyway, shaft end tapped ¾˝-10 • Base mount four 1.02˝ holes on 17.32˝ x 11.42˝ ctrs.

Output RPM Input Output Over-Hung Truck Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price 13-1558-10-324TC 10:1 10.44 168 40 14240 2581 324TC 2 I 477 lbs. $2656.00 13-1558-10-326TC 10:1 10.44 168 50 17800 2581 326TC 2 I 477 lbs. $2656.00 13-1558-20-284TC 20:1 21.79 86 25 16726 3054 284TC 3 II 477 lbs. $2656.00 13-1558-20-286TC 20:1 21.79 86 30 20072 3054 286TC 3 I 477 lbs. $2656.00 13-1558-20-324TC 20:1 21.79 86 40 26762 3054 324TC 3 I 477 lbs. $2656.00 13-1558-30-284TC 30:1 29.23 60 25 24164 3502 284TC 3 I 477 lbs. $2656.00 13-1558-30-286TC 30:1 29.23 60 30 28997 3502 286TC 3 I 477 lbs. $2656.00 13-1558-40-254TC 40:1 39.52 44 15 19600 3951 254TC 3 II 477 lbs. $2656.00 13-1558-40-256TC 40:1 39.52 44 20 26134 3951 256TC 3 II 477 lbs. $2656.00 13-1558-50-213TC 50:1 53 33 7.5 13145 4422 213TC 3 III 477 lbs. $2656.00 13-1558-50-215TC 50:1 53 33 10 17526 4422 215TC 3 III 477 lbs. $2656.00 13-1558-50-254TC 50:1 53 33 15 26289 4422 254TC 3 I 477 lbs. $2656.00 13-1558-50-256TC 50:1 53 33 20 35053 4422 256TC 3 I 477 lbs. $2656.00 13-1558-60-213TC 60:1 62.9 28 7.5 15599 4794 213TC 3 III 477 lbs. $2656.00 13-1558-60-215TC 60:1 62.9 28 10 20799 4794 215TC 3 II 477 lbs. $2656.00 13-1558-60-254TC 60:1 62.9 28 15 31198 4794 254TC 3 I 477 lbs. $2656.00 13-1558-80-213TC 80:1 79.95 22 7.5 19827 5309 213TC 3 II 477 lbs. $2656.00 13-1558-80-215TC 80:1 79.95 22 10 26436 5309 215TC 3 I 477 lbs. $2656.00 13-1558-120-213TC 120:1 115.5 15 7.5 26909 5938 213TC 3 I 477 lbs. $2656.00 13-1558-120-215TC 120:1 115.5 15 10 38192 5938 215TC 3 I 477 lbs. $2656.00

• Brand new, WORLDWIDE ELECTRIC helical inline speed reducers. Cast iron housings. Drop-in replacement formost major inline reducer brands. Gearbox flanges are designed to accept NEMA C-Face electric motors.

• Dimensional drawings and additional information available at www.surpluscenter.com.

These speed reducers are not stocked at Surplus Center; they drop-ship directly from our vendor's warehouse.DROP SHIP

Worm Drive Hose Clamps• Brand new, worm drive hose clamps. Stainless steel bandwith zinc plated screw. 5/16˝ slotted hex head screw. Sold in-dividually or in boxes of 10 clamps.

5/16˝ Wide Mini Hose ClampsIndividually Box of 10 clamps

SAE Size Clamp Range ITEM Shpg. Price ITEM Shpg. Price4 ¼˝ to ⅝˝ 455-PP 1/10 lb. $ .40 1-5041-4 ¼ lb. $4.006 5/16˝ to ⅞˝ 455-QQ 1/10 lb. $ .40 1-5041-6 ¼ lb. $4.00

½˝ Wide Standard Hose ClampsIndividually Box of 10 clamps

SAE Size Clamp Range ITEM Shpg. Price ITEM Shpg. Price6 ⅜˝ to ⅞˝ 1-5039-6 1/10 lb. $ .55 1-5040-6 1 lb. $5.008 7/16˝ to 1˝ 1-5039-8 1/10 lb. $ .55 1-5040-8 1 lb. $5.0010 ½˝ to 11/16˝ 1-5039-10 1/10 lb. $ .55 1-5040-10 1 lb. $5.0012 ½˝ to 1¼˝ 1-5039-12 ⅛ lb. $ .55 1-5040-12 1 lb. $5.0016 13/16˝ to 1½˝ 1-5039-16 ⅛ lb. $ .55 1-5040-16 1½ lbs. $5.0020 13/16˝ to 1¾˝ 1-5039-20 ⅛ lb. $ .65 1-5040-20 1½ lbs. $6.0024 1˝ to 2˝ 1-5039-24 ⅛ lb. $ .65 1-5040-24 1½ lbs. $6.0028 15/16˝ to 2¼˝ 1-5039-28 ⅛ lb. $ .65 1-5040-28 1½ lbs. $6.0032 19/16˝ to 2½˝ 1-5039-32 ⅛ lb. $ .75 1-5040-32 1½ lbs. $7.0036 113/16˝ to 2¾˝ 1-5039-36 ⅛ lb. $ .75 1-5040-36 1½ lbs. $7.00

Roller ChainLoopITEM 1-3426$1.99• New, ANSI standard heavy riveted rollerchain. Continuous loop of roller chain. Noslip-fit connector.SPECIFICATIONS • Length 27˝ (72 Links)• Pitch 35 • Shpg. ½ lb.

1⅛˝ Dia. x 7¾˝ Hitch Pin

ITEM 1-4112$6.99• New zinc plated steel hitch pin. Hairpinnot included.SPECIFICATIONS• Pin diameter 1⅛˝ • Usable length 6⅞˝• Pin length 7¾˝ • Shpg. 3 lbs.



800-488-3407 Worldwide Helical Inline Speed Reducers 129&

Box Size 137 • Output shaft 3.625˝ dia. x 6.69˝ long, ⅞˝ wide keyway, shaft end tapped 1˝-8 • Base mount four 1.3˝ holes on 19.29˝ x 13.39˝ ctrs.

Output RPM Input Output Over-Hung Truck Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price 13-1559-10-364TC 10:1 10.12 173 60 20699 3266 364TC 2 II 685 lbs. $4380.00 13-1559-10-365TC 10:1 10.12 173 75 25784 3266 365TC 2 I 685 lbs. $4380.00 13-1559-20-364TC 20:1 20.68 85 60 41026 3491 364TC 3 I 685 lbs. $4380.00 13-1559-20-365TC 20:1 20.68 85 75 51282 3491 365TC 3 I 685 lbs. $4380.00 13-1559-30-324TC 30:1 32.81 53 40 43401 4467 324TC 3 I 685 lbs. $4380.00 13-1559-30-326TC 30:1 32.81 53 50 54251 4467 326TC 3 I 685 lbs. $4380.00 13-1559-40-284TC 40:1 43.25 40 25 35756 5017 284TC 3 II 685 lbs. $4380.00 13-1559-40-286TC 40:1 43.25 40 30 42908 5017 286TC 3 I 685 lbs. $4380.00 13-1559-40-324TC 40:1 43.25 40 40 57210 5017 324TC 3 I 685 lbs. $4380.00 13-1559-50-254TC 50:1 50.13 35 15 24734 5545 254TC 3 III 685 lbs. $4380.00 13-1559-50-256TC 50:1 50.13 35 20 33156 5545 256TC 3 II 685 lbs. $4380.00 13-1559-50-284TC 50:1 50.13 35 25 41445 5545 284TC 3 I 685 lbs. $4380.00 13-1559-50-286TC 50:1 50.13 35 30 49734 5545 286TC 3 I 685 lbs. $4380.00 13-1559-60-254TC 60:1 59.14 30 15 29178 6331 254TC 3 II 685 lbs. $4380.00 13-1559-60-256TC 60:1 59.14 30 20 39113 6331 256TC 3 I 685 lbs. $4380.00 13-1559-80-254TC 80:1 79.05 22 15 39002 6802 254TC 3 I 685 lbs. $4380.00 13-1559-80-256TC 80:1 79.05 22 20 52281 6802 256TC 3 I 685 lbs. $4380.00 13-1559-120-254TC 120:1 117.25 15 15 57847 7835 254TC 3 I 685 lbs. $4380.00

Box Size 147 • Output shaft 4.375˝ dia. x 8.27˝ long, 1˝ wide keyway, shaft end tapped 1˝-8 • Base mount four 1.54˝ holes on 19.69˝ x 14.96˝ ctrs.

Output RPM Input Output Over-Hung Truck Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price 13-1560-10-405TC 10:1 10.24 171 100 34900 7200 405TC 2 III 981 lbs. $7425.00 13-1560-20-364TC 20:1 19.99 88 60 39662 9020 364TC 3 II 981 lbs. $7425.00 13-1560-20-365TC 20:1 19.99 88 75 49578 9020 365TC 3 II 981 lbs. $7425.00 13-1560-30-324TC 30:1 30.23 58 40 48251 10340 324TC 3 III 981 lbs. $7425.00 13-1560-30-326TC 30:1 30.23 58 50 60314 10340 326TC 3 II 981 lbs. $7425.00 13-1560-30-364TC 30:1 30.23 58 60 72377 10340 364TC 3 I 981 lbs. $7425.00 13-1560-40-284TC 40:1 41.7 42 25 34469 11550 284TC 3 III 981 lbs. $7425.00 13-1560-40-286TC 40:1 41.7 42 30 41362 11550 286TC 3 III 981 lbs. $7425.00 13-1560-40-324TC 40:1 41.7 42 40 55150 11550 324TC 3 II 981 lbs. $7425.00 13-1560-40-326TC 40:1 41.7 42 50 69937 11550 326TC 3 I 981 lbs. $7425.00 13-1560-50-256TC 50:1 50.49 35 20 33392 12320 256TC 3 III 981 lbs. $7425.00 13-1560-50-284TC 50:1 50.49 35 25 41740 12320 284TC 3 III 981 lbs. $7425.00 13-1560-50-286TC 50:1 50.49 35 30 50088 12320 286TC 3 II 981 lbs. $7425.00 13-1560-60-256TC 60:1 60.38 29 20 39935 13090 256TC 3 III 981 lbs. $7425.00 13-1560-60-324TC 60:1 60.38 29 40 79869 13090 324TC 3 I 981 lbs. $7425.00 13-1560-80-256TC 80:1 83.3 21 20 55087 13640 256TC 3 II 981 lbs. $7425.00 13-1560-80-284TC 80:1 83.3 21 25 68859 13640 284TC 3 I 981 lbs. $7425.00 13-1560-80-286TC 80:1 83.3 21 30 82631 13640 286TC 3 I 981 lbs. $7425.00 13-1560-120-256TC 120:1 117.29 15 20 77567 13640 256TC 3 I 981 lbs. $7425.00

Pictures Represent Box Size 137

DROP SHIP

• Brand new, WORLDWIDE ELECTRIC helical inline speedreducers. Cast iron housings. Drop-in replacement for mostmajor inline reducer brands. Gearbox flanges are designedto accept NEMA C-Face electric motors.

• Dimensional drawings and additional information availableat www.surpluscenter.com.

These speed reducers are not stocked atSurplus Center; they drop-ship directly

from our vendor's warehouse.

130 Right Angle Gear Reducers www.surpluscenter.com8

Output Motor Input Output in. lbs. Output Output Mtg. Bolt ITEM Ratio Mount HP RPM Torque Shaft Ctrline Ht Pattern Shpg. Price 13-206-5-56C 5 56C 2.9 350 416 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.95 13-237-5-56C 5 56C 3.91 350 640 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-262-5-182TC 5 182TC 4.9 350 915 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 56 $139.95 13-325-5-184TC 5 184TC 9.1 350 1517 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 93 $189.95 13-262-10-182TC 10 182TC 3.4 175 1296 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 56 $139.95 13-237-20-145TC 20 145TC 1.62 88 941 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-262-40-56C 40 56C 1.18 44 1477 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 53 $139.95 13-237-50-56C 50 56C 0.83 35 818 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-325-50-145TC 50 145TC 1.95 35 2012 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 90 $189.95

Output Motor Input Output in. lbs. Output Output Mtg. Bolt ITEM Ratio Mount HP RPM Torque Shaft Ctrline Ht Pattern Shpg. Price 13-206-5-56C-DE 5 56C 2.9 350 416 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.95 13-237-5-56C-DE 5 56C 3.91 350 640 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-262-5-182TC-DE 5 182TC 4.9 350 915 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 56 $139.95 13-325-5-184TC-DE 5 184TC 9.1 350 1517 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 93 $189.95 13-237-10-56C-DE 10 56C 2.72 175 851 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-262-10-182TC-DE 10 182TC 3.4 175 1296 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 56 $139.95 13-325-10-184TC-DE 10 184TC 6.55 175 1764 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 93 $189.95 13-262-40-56C-DE 40 56C 1.18 44 1477 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 53 $139.95 13-325-40-56C-DE 40 56C 2.3 44 1931 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 90 $189.95 13-262-50-56C-DE 50 56C 1.04 35 1164 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 53 $139.95

• New. Cast iron gear reducers. Dimensionally interchangeablewith Boston, Leeson, Winsmith and Morse. One piece housing,tapered roller bearings on output shaft. Not filled with oil. Fourtapped mounting holes on top and bottom of box. Separatemounting base is included. Furnished with output shaft to rightwhen viewed from motor flange. Easily changed to left output.

Single Output Dual Output

SINGLE

OUTPUT

DUAL

OUTPUT

Output Input Input Output in. lbs. Output Output Mtg. Bolt ITEM Ratio Shaft HP RPM Torque Shaft Ctrline Ht Pattern Shpg. Price13-262-5-S 5 ¾˝ x 2⅜˝ 4.9 350 915 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 56 $139.9513-325-5-S 5 ⅞˝ x 2⅜˝ 9.1 350 1517 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 93 $189.9513-206-10-S 10 ⅝˝ x 1¾˝ 2.02 175 474 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.9513-237-10-S 10 ¾˝ x 2⅜˝ 2.72 175 851 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.9513-262-10-S 10 ¾˝ x 2⅜˝ 3.4 175 1296 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 56 $139.9513-206-20-S 20 ⅝˝ x 1¾˝ 1.2 88 417 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.9513-237-20-S 20 ¾˝ x 2⅜˝ 1.62 88 941 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.9513-206-30-S 30 ⅝˝ x 1¾˝ 0.9 58 526 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.9513-237-30-S 30 ¾˝ x 2⅜˝ 1.2 58 945 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.9513-262-30-S 30 ¾˝ x 2⅜˝ 1.54 58 1434 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 53 $139.9513-206-40-S 40 ⅝˝ x 1¾˝ 0.76 44 428 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.9513-237-40-S 40 ¾˝ x 2⅜˝ 1 44 937 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.9513-237-50-S 50 ¾˝ x 2⅜˝ 0.83 35 818 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95

SHAFT

TO

SHAFT

Cast Iron Gear Reducers

• New. Cast iron gear reducers. Dimensionally interchangeable with Boston, Leeson, Winsmith and Morse.One piece housing, tapered roller bearings on output shaft. Not filled with oil. Four tapped mounting holeson top and bottom of box.• Separate mounting base is included. Furnished with output shaft to right when viewed from motor flange.Easily changed to left output.• Keyed input shafts. Input can be from direct coupling, chain and sprocket or pulleys. Allows additionalgear reduction between motor and box resulting in additional torque and lower output speeds.

800-488-3407 Shaft Mount Gear Reducers & Accessories 131&

MotorMount

• Heavy gauge paintedsteel construction forNEMA frame motors. Ad-justable top plate for drive belttensioning and alignment.

Shaft Mount Gear Reducers• Brand new, WORLDWIDE Electric Corp. shaft mount reducers.Service class III. Cast iron housing, high grade case hardened steelgears and shafts. Double lip seals. Metal reinforced double lips,spring loaded oil seals. Size 2 gear reducers have ball bearings, Size3-6 gear reducers have tapered roller bearings. Torque arm included.Interchangeable with Dodge, Hub City, Edison and Browning shaftmount reducers.

Find tapered bushings and other accessories in the charts below.

Tapered bushing kit sold separately - see chart below for output bore and appropriate ITEM number.

Performance Specifications

BackstopAssembly

• Ensures smooth for-ward operation of con-

veyor with no back slip.

2

3

4

5

6

Tapered Bushings

• Twin tapered bushing kit for shaft mount reducers.Includes two bushings, bolts and full length shaft key.

Order bushing by gear reducer size and diameter of shaft it will be mounted on.

Size 2 Size 3 Size 4 Size 5 Size 6

$52.95 each $64.95 each $88.95 each $122.95 each $158.95 eachShpg. 5 lbs. Shpg. 6 lbs. Shpg. 8 lbs. Shpg. 10 lbs. Shpg. 13 lbs.

ITEM Dia. ITEM Dia. ITEM Dia. ITEM Dia. ITEM Dia.13-2-TBK-1516 15/16˝ 13-3-TBK-11116 111/16˝ 13-4-TBK-11516 115/16˝ 13-5-TBK-2316 23/16˝ 13-6-TBK-212 2½˝13-2-TBK-138 1⅜˝ 13-3-TBK-134 1¾˝ 13-4-TBK-2 2˝ 13-5-TBK-214 2¼˝ 13-6-TBK-21116 211/16˝13-2-TBK-1716 17/16˝ 13-3-TBK-178 1⅞˝ 13-4-TBK-218 2⅛˝ 13-5-TBK-2716 27/16˝ 13-6-TBK-278 2⅞˝13-2-TBK-112 1½˝ 13-3-TBK-11516 115/16˝ 13-4-TBK-2316 23/16˝ 13-5-TBK-212 2½˝ 13-6-TBK-21516 215/16˝13-2-TBK-158 1⅝˝ 13-3-TBK-2 2˝ 13-4-TBK-214 2¼˝ 13-5-TBK-21116 211/16˝ 13-6-TBK-3 3˝13-2-TBK-11116 111/16˝ 13-3-TBK-2316 23/16˝ 13-4-TBK-2716 27/16˝ 13-5-TBK-21516 215/16˝ 13-6-TBK-3716 37/16˝13-2-TBK-134 1¾˝13-2-TBK-11516 115/16˝

Reducer Input Output Torque Min. Drive Input ShaftSize ITEM Ratio HP RPM (in-lbs.) Pulley Dia. Dia. x Lgth. x Keyway Size Shpg. Price

13-2-SMR-15 15:1 5 104-140 2899-2154 3.0˝ 1⅛˝ x 39/16˝ x ¼˝ 8⅜˝ x 117/16˝ x 5⅞˝ 71 lbs. $ 343.9513-2-SMR-25 25:1 3 58-85 3119-2128 3.0˝ 1⅛˝ x 39/16˝ x ¼˝ 8⅜˝ x 117/16˝ x 5⅞˝ 71 lbs. $ 343.9513-3-SMR-15 15:1 7.5 94-140 4811-3230 4.0˝ 1¼˝ x 45/16˝ x ¼˝ 9¼˝ x 12⅞˝ x 79/16˝ 94 lbs. $ 610.9513-3-SMR-25 25:1 5 57-85 5290-3547 4.0˝ 1¼˝ x 45/16˝ x ¼˝ 9¼˝ x 12⅞˝ x 79/16˝ 93 lbs. $ 610.9513-4-SMR-15 15:1 10 79-141 7633-4277 4.6˝ 17/16˝ x 59/16˝ x ⅜˝ 10⅜˝ x 15⅛˝ x 83/16˝ 175 lbs. $ 825.9513-4-SMR-25 25:1 7.5 57-85 7934-5321 4.6˝ 17/16˝ x 59/16˝ x ⅜˝ 10⅜˝ x 15⅛˝ x 83/16˝ 170 lbs. $ 825.9513-5-SMR-15 15:1 20 115-125 10487-9648 5.4˝ 115/16˝ x 5¾˝ x ½˝ 13⅛˝ x 185/16˝ x 813/16˝ 221 lbs. $1239.9513-5-SMR-25 25:1 10 46-78 13109-7731 5.4˝ 115/16˝ x 5¾˝ x ½˝ 13⅛˝ x 185/16˝ x 813/16˝ 215 lbs. $1239.9513-6-SMR-15 15:1 30 99-125 18276-14472 6.2˝ 23/16˝ x 61/16˝ x ½˝ 15⅛˝ x 215/16˝ x 9⅝˝ 345 lbs. $1585.9513-6-SMR-25 25:1 20 58-70 20794-17229 6.2˝ 23/16˝ x 61/16˝ x ½˝ 15⅛˝ x 215/16˝ x 9⅝˝ 333 lbs. $1585.95

Size ITEM Motor Frame Shpg. Price ITEM Shpg. Price ITEM Shpg. Price2 13-2-MM 56-215T 34 lbs. $151.95 13-2-BSK 2 lbs. $83.95 13-2-BG 30 lbs. $151.953 13-3-MM 56-215T 36 lbs. $155.95 13-3-BSK 2 lbs. $106.95 13-3-BG 38 lbs. $171.954 13-4-MM 143-286T 79 lbs. $242.95 13-4-BSK 2 lbs. $106.95 13-4-BG 44 lbs. $197.955 13-5-MM 143-286T 82 lbs. $242.95 13-5-BSK 3 lbs. $126.95 13-5-BG 48 lbs. $217.956 13-6-MM 143-286T 107 lbs. $337.95 13-6-BSK 4 lbs. $240.95 13-6-BG 61 lbs. $247.95

Belt Guard• Heavy gaugepainted all steel

construction.Screened face.

Select accessories to match reducer size.

Pulley

ITEM 1-995-B$3.95• New. Smooth bore with keyway.SPECIFICATIONS • Belt width ⅜˝• 1¾˝ O.D. • Belt type 3L• Bore ½˝ • Material die cast• Single groove • Shpg. ½ lb.

132 Right Angle Gearboxes www.surpluscenter.com8

20:1 GearReducer

ITEM 13-1509$79.95• New, BOSTON, Model F71020B4GT2,cast iron right angle gear reducer. Left sideoutput.SPECIFICATIONS • Shafts• Ratio 20:1 Input female ½˝ bore• Power ¼ HP max. Output ½˝ dia. x 1¼˝• Input 1750 RPM max. with ⅛˝ keyway & flat• Output 87.5 RPM max. • Mount 4 holes 1.69˝ x 2.63˝• Torque 149 in.lbs. max. top and bottom• Output centerline ht. 1.31˝• Size 4¾˝ x 4˝ x 4¼˝• Motor mount 42CZ • Shpg. 8 lbs.

Right Angle Gear Drives• Brand new CURTIS. One piece cast iron gear case is precision machinedfor bearings and gears. Cast aluminum bearing caps. Timken roller bearings.Dual lip seals. All boxes 1:1 gear ratio, all shafts smooth w/keyway. Shafts ro-tate in opposite directions when viewed from end. Four bolt mount top andbottom, drilled and tapped. Made in USA.

HP Max. HP at Listed RPM Oil Cap. MountingITEM Cont. Int. 500 1000 1400 1800 Shafts Pints C/C Thread Size Shpg. Price1324 31.83 40.00 14.05 25.65 33.14 40.00 1˝ dia. x 2˝ 1 4¼˝ ⅜-16 6¼˝ x 6¼˝ x 4¼˝ 24 lbs. $238.801325 60.51 70.48 29.34 53.18 70.48 — 1¼˝ dia. x 2½˝ 1½ 4½˝ ½-13 8˝ x 8˝ x 5⅝˝ 41 lbs. $508.251326 * 60.51 70.48 29.34 53.18 70.48 — 1¼˝ dia. x 2½˝ 1½ 4½˝ ½-13 8˝ x 8˝ x 5⅝˝ 41 lbs. $499.501327 123.52 139.78 77.84 139.78 — — 1⅜˝ dia. x 215/16˝ 4 6˝ ½-13 10½˝ x 10½˝ x 7½˝ 75 lbs. $882.251327-S ** 123.52 139.78 77.84 139.78 — — 1⅜˝ dia. x 215/16˝ 4 6˝ ½-13 10½˝ x 10½˝ x 7½˝ 75 lbs. $948.95* Has 3 shafts with output thru shaft ** Shafts rotate in same direction when viewed from end

Right Angle Gearboxes• Brand new. Right anglegearboxes. One piece castiron gear case and bearingcaps. Roller bearings. Shipswithout oil, user must add ⅓quart of 80-90 W oil prior touse.

SPECIFICATIONS FOR ALL • Output shaft 1˝ dia. x 2¼˝ w/¼˝ keyway• Ratio 1:1 • Mount four ⅜-16 tapped holes, 4¼˝ square• Input power 40 HP intermittent, 32 HP continuous • Size 5⅞˝ x 6½˝ x 4⅛˝• Input speed 1800 RPM max. • Shpg. 24 lbs.

ITEM Input Shaft Output rotation Price13-1423 1˝ dia. x 2½˝ w/5/16˝ crosshole Opposite of input $149.9513-1423-S 1˝ dia. x 2½˝ w/5/16˝ crosshole Same as input $149.9513-1423-K 1˝ dia. x 2½˝ w/¼˝ keyway Opposite of input $149.9513-1423-SK 1˝ dia. x 2½˝ w/¼˝ keyway Same as input $149.9513-1423-3K 1˝ dia. x 2½˝ w/¼˝ keyway Dual shaft $169.95

9:1 ShaftMount

Reducers

• New, AURORA shaft mount reducers. 9:1gear ratio. Cast iron housing, high gradecase hardened steel gears and shafts. Ta-pered roller bearings. Tapered bushingoutput (bushing not included). Torque armincluded. Similar to Dodge or Browning.HP, torque and RPM specifications are forClass III service. May be used with acces-sories on previous page.

ITEM 13-1496 $399.95• Series 3. Input 10 HP. Input shaft 1¼˝ x4˝. Size 9˝ x 8˝ x 13˝. Shpg. 98 lbs.

ITEM 13-1497 $499.95• Series 4. Input 15 HP. Input shaft 17/16˝ x5˝. Size 11˝ x 8˝ x 13˝. Shpg. 160 lbs.

Truck freight only.

ITEM 13-1498 $995.95• Series 6. Input 25 HP. Input shaft 23/16˝ x5½˝. Size 16˝ x 9½˝ x 21˝. Shpg. 330 lbs.

Truck freight only.

Belt ITEM OD Bore Grooves Type Material Shpg. Price 1-2565 3½˝ 1⅛˝ 1 ⅝˝ Cast Iron 3 lbs. $4.95 1-3968 4˝ 17/16˝ 2 ½˝ Steel 3 lbs. $3.95 1-AZ47X34 4.7˝ ¾˝ 1 ½˝ Die Cast 1½ lbs. $4.95 1-2221 4⅞˝ 1˝ 2 ½˝ Cast Iron 5 lbs. $6.95 1-2540 6½˝ 17/16˝ 2 ⅜˝ Cast Iron 6 lbs. $7.95

Pulleys

5½˝ Dia. SingleGroove PulleyITEM 1-4678$4.95• New, single groove, steel pulley with key-way (not drilled for setscrew). Ideal formounting on small engine crankshaft. SPECIFICATIONS• Outside dia. 5½˝ • Length thru bore 1⅞˝• Belt type A (½˝) • Hub offset ½˝• Bore 1⅛˝ dia. w/¼˝ keyway • Shpg. 2 lbs.

Single GroovePulley

ITEM 1-4720$9.99• New, single groove, steel pulley with ta-pered bore hub.SPECIFICATIONS • Bore 15mm tapered• Outside diameter 5½˝ w/keyway• Belt type A (½˝) • Hub offset 5/16˝• Length thru bore ⅞˝ • Shpg. 2 lbs.



3˝ O.D. x 3¾˝ Load RollerITEM 1-4699-C $5.99• New. Blue polyurethane roller on steelcore. Precision ball bearings for hub(furnished loose).SPECIFICATIONS • Bearings 20mm ID• Length 3¾˝ sealed ball bearings• Diameter 3˝ • Shpg. 3 lbs.

800-488-3407 Rod Ends & Centrifugal Clutches 133&

Pulley CentrifugalClutches

$75.95 ea.Brand new, HILLIARD EX-

TREME DUTY pulley cen-trifugal clutches. Ideal for chipper

shredders, power trowels, concrete mixers, power screeds, aircompressors and lawn and garden equipment. Thermodynami-cally designed clutch shoe increases the clutch’s capacity to ab-sorb heat without damaging clutch springs, resulting in longer lifeand greater reliability. Easy to install. Overload protection. Madein USA.SPECIFICATIONS• Maximum power 13 HP • Load-free starting • Bi-directional operation• Works with A or B belts • Shpg. 4 lbs.

3.0˝ Diameter Pulley w/ Bronze BushingITEM Bore Integral Key Engaging Speed

1-3976-62 ⅝˝ dia. x 2⅜˝ 3/16˝ 1800 RPM1-3976-75 ¾˝ dia. x 2⅜˝ 3/16˝ 1800 RPM1-3976-87 ⅞˝ dia. x 2⅜˝ 3/16˝ 1800 RPM1-3979-87 ⅞˝ dia. x 2⅜˝ 3/16˝ 2300 RPM1-3976-100 1˝ dia. x 2⅜˝ ¼˝ 1800 RPM1-3977-100 1˝ dia. x 2⅜˝ ¼˝ 1200 RPM1-3978-100 1˝ dia. x 2⅜˝ ¼˝ 3000 RPM

3.7˝ Diameter Pulley w/BearingITEM Bore Integral Key Engaging Speed

1-3974-62 ⅝˝ dia. x 2⅜˝ 3/16˝ 1800 RPM1-3974-75 ¾˝ dia. x 2⅜˝ 3/16˝ 1800 RPM1-3975-75 ¾˝ dia. x 2⅜˝ 3/16˝ 2300 RPM1-3974-87 ⅞˝ dia. x 2⅜˝ 3/16˝ 1800 RPM1-3974-100 1˝ dia. x 2⅜˝ ¼˝ 1800 RPM1-3975-100 1˝ dia. x 2⅜˝ ¼˝ 2300 RPM

Sprocket Centrifugal Clutches• Brand new, HILLIARD EXTREME DUTYsprocket centrifugal clutches. Ideal for go-karts,youth snowmobiles and other applications.Thermodynamically designed clutch shoe in-creases the clutch’s capacity to absorb heatwithout damaging clutch springs, resulting inlonger life and greater reliability. Easy to install.Overload protection. Made in USA.SPECIFICATIONS • Bi-directional operation• Maximum power 13 HP • Load-free starting• Engaging speed 2300 RPM • Shpg. 4 lbs.

IntegralITEM Bore Pitch Teeth Key Price1-3971-62 ⅝˝ dia. x 25/16˝ 35 12 3/16˝ $40.951-3972-62 ⅝˝ dia. x 2¼˝ 40/41 10 3/16˝ $40.951-3971-75 ¾˝ dia. x 25/16˝ 35 12 3/16˝ $40.951-3973 ** ¾˝ dia. x 25/16˝ 35 12 3/16˝ $46.951-3972-75 ¾˝ dia. x 2¼˝ 40/41 10 3/16˝ $40.951-3989-17 * 1˝ dia. x 2⅜˝ 35 17 ¼˝ $97.951-3988-14 * 1˝ dia. x 2⅜˝ 40/41 14 ¼˝ $97.95* Not intended for racing** Intended for Mini-Bike's engaging speed 1800 RPM

Female Threaded Rod EndsLeft Hand Right Hand End-To-CenterITEM ITEM Bore Thread Length Shpg. Price

13-CFL-4 13-CFR-4 ¼˝ ¼˝-28 1.312˝ ¼ lb. $ 5.0013-CFL-5 13-CFR-5 5/16˝ 5/16˝-24 1.375˝ ¼ lb. $ 3.9013-CFL-6 13-CFR-6 ⅜˝ ⅜˝-24 1.625˝ ¼ lb. $ 4.5013-CFL-7 13-CFR-7 7/16˝ 7/16˝-20 1.812˝ ¼ lb. $ 5.5513-CFL-8 13-CFR-8 ½˝ ½˝-20 2.125˝ ½ lb. $ 6.0513-CFL-10 13-CFR-10 ⅝˝ ⅝˝-18 2.500˝ ½ lb. $ 8.5013-CFL-12 13-CFR-12 ¾˝ ¾˝-16 2.875˝ ¾ lb. $12.9513-CFL-16 13-CFR-16 1˝ 1˝-14 4.125˝ 2¼ lb. $31.95

Male Threaded Rod EndsLeft Hand Right Hand End-To-CenterITEM ITEM Bore Thread Length Shpg. Price

13-CML-4 13-CMR-4 ¼˝ ¼˝-28 1.562˝ ¼ lb. $ 5.0013-CML-5 13-CMR-5 5/16˝ 5/16˝-24 1.875˝ ¼ lb. $ 3.9013-CML-6 13-CMR-6 ⅜˝ ⅜˝-24 1.938˝ ¼ lb. $ 4.5013-CML-7 13-CMR-7 7/16˝ 7/16˝-20 2.125˝ ¼ lb. $ 5.5513-CML-8 13-CMR-8 ½˝ ½˝-20 2.438˝ ¼ lb. $ 6.0513-CML-10 13-CMR-10 ⅝˝ ⅝˝-18 2.625˝ ½ lb. $ 8.5013-CML-12 13-CMR-12 ¾˝ ¾˝-16 2.875˝ ¾ lb. $12.95

– 13-CMR-16 1˝ 1˝-14 4.125˝ 2 lbs. $31.95

Female Threaded Rod EndsWith Male Threaded StudsLeft Hand Right Hand End-To-CenterITEM ITEM Thread Length Shpg. Price

13-AFL-4S 13-AFR-4S ¼˝-28 1.312˝ ¼ lb. $ 4.8513-AFL-5S 13-AFR-5S 5/16˝-24 1.375˝ ¼ lb. $ 5.5013-AFL-6S 13-AFR-6S ⅜˝-24 1.625˝ ¼ lb. $ 6.0513-AFL-7S 13-AFR-7S 7/16˝-20 1.812˝ ½ lb. $ 7.1513-AFL-8S 13-AFR-8S ½˝-20 2.125˝ ½ lb. $ 8.9013-AFL-10S 13-AFR-10S ⅝˝-18 2.500˝ ¾ lb. $14.9513-AFL-12S 13-AFR-12S ¾˝-16 2.875˝ 1¼ lb. $15.95

Male Threaded Rod EndsWith Male Threaded StudsLeft Hand Right Hand End-To-CenterITEM ITEM Thread Length Shpg. Price

13-AML-4S 13-AMR-4S ¼˝-28 1.562˝ ¼ lb. $ 4.8513-AML-5S 13-AMR-5S 5/16˝-24 1.875˝ ¼ lb. $ 5.5013-AML-6S 13-AMR-6S ⅜˝-24 1.938˝ ¼ lb. $ 6.05

– 13-AMR-7S 7/16˝-20 2.125˝ ½ lb. $ 7.1513-AML-8S 13-AMR-8S ½˝-20 2.438˝ ½ lb. $ 8.9013-AML-10S 13-AMR-10S ⅝˝-18 2.625˝ ¾ lb. $14.95

– 13-AMR-12S ¾˝-16 2.875˝ 1¼ lb. $15.95

Threaded Rod Ends• Brand new. Available with left or right hand threads. Steel

housing with steel raceway.

134 Weld-on Sprockets & Hubs www.surpluscenter.com8

40 Pitch 50 Pitch 60 Pitch # Teeth ITEM Dia Hub Price ITEM Dia Hub Price ITEM Dia Hub Price

9 – – – – 1-1980-9 2.09 V $3.60 1-1981-9 2.51 V $4.85 10 – – – – 1-1980-10 2.30 V $3.60 1-1981-10 2.76 V $4.25 11 1-1979-11 2.00 V $2.90 1-1980-11 2.50 V $4.15 1-1981-11 3.00 W $4.50 12 1-1979-12 2.17 V $3.00 1-1980-12 2.71 W $4.50 1-1981-12 3.25 W $5.05 13 1-1979-13 2.33 V $3.15 1-1980-13 2.92 W $4.65 1-1981-13 3.49 W $5.10 14 1-1979-14 2.49 V $3.90 1-1980-14 3.12 W $4.90 1-1981-14 3.74 W $5.60 15 1-1979-15 2.65 V $3.40 1-1980-15 3.32 W $4.45 1-1981-15 3.98 X $6.15 16 1-1979-16 2.82 W $3.55 1-1980-16 3.52 W $4.55 1-1981-16 4.22 X $6.30 17 1-1979-17 2.98 W $3.90 1-1980-17 3.72 X $5.10 1-1981-17 4.47 X $7.20 18 1-1979-18 3.14 W $4.10 1-1980-18 3.92 X $5.20 1-1981-18 4.7 X $7.70 19 1-1979-19 3.23 W $4.25 1-1980-19 4.13 X $5.65 1-1981-19 4.95 X $8.50 20 1-1979-20 3.48 X $4.60 1-1980-20 4.33 X $5.95 1-1981-20 5.19 X $9.40 21 1-1979-21 3.62 X $4.30 1-1980-21 4.53 X $6.40 1-1981-21 5.46 X $10.35 22 1-1979-22 3.78 X $4.60 1-1980-22 4.72 X $6.80 1-1981-22 5.67 X $11.20 23 1-1979-23 3.94 X $4.90 1-1980-23 4.92 X $7.10 1-1981-23 5.91 X $12.10 24 1-1979-24 4.1 X $5.40 1-1980-24 5.13 X $7.55 1-1981-24 6.15 X $13.05 25 1-1979-25 4.26 X $5.70 1-1980-25 5.33 X $8.15 1-1981-25 6.4 X $14.05 26 1-1979-26 4.42 X $6.00 1-1980-26 5.53 X $8.75 1-1981-26 6.63 X $15.10 27 1-1979-27 4.58 X $6.50 1-1980-27 5.72 X $9.40 1-1981-27 6.87 X $16.15 28 1-1979-28 4.74 X $6.60 1-1980-28 5.93 X $9.95 1-1981-28 7.15 X $17.30 29 1-1979-29 4.90 X $7.00 1-1980-29 6.12 X $10.40 1-1981-29 7.35 X $18.40 30 1-1979-30 5.06 X $7.45 1-1980-30 6.32 X $11.25 1-1981-30 7.59 X $19.45 31 1-1979-31 5.22 X $7.90 1-1980-31 6.52 X $11.95 1-1981-31 7.83 X $20.75 32 1-1979-32 5.38 X $8.40 1-1980-32 6.72 X $12.95 1-1981-32 8.07 X $20.95 33 1-1979-33 5.54 X $8.85 1-1980-33 6.92 X $13.50 1-1981-33 8.30 X $22.95 34 1-1979-34 5.70 X $9.30 1-1980-34 7.12 X $13.95 1-1981-34 8.54 X $23.95 35 1-1979-35 5.86 X $9.85 1-1980-35 7.32 X $14.60 1-1981-35 8.78 X $24.95 36 1-1979-36 6.02 X $10.35 1-1980-36 7.52 X $15.95 1-1981-36 9.02 X $25.95 37 1-1979-37 6.18 X $10.49 1-1980-37 7.72 X $17.20 1-1981-37 9.26 X $27.95 38 1-1979-38 6.33 X $11.40 1-1980-38 7.92 X $18.10 1-1981-38 9.50 X $28.95 39 1-1979-39 6.49 X $11.95 1-1980-39 8.12 X $18.40 1-1981-39 9.74 X $30.95 40 1-1979-40 6.65 X $12.20 1-1980-40 8.32 X $18.60 1-1981-40 9.98 X $31.95 41 1-1979-41 6.81 X $12.95 1-1980-41 8.52 X $19.60 1-1981-41 10.22 X $32.95 42 1-1979-42 6.97 X $13.40 1-1980-42 8.72 X $20.75 1-1981-42 10.46 X $33.95 43 1-1979-43 7.13 X $13.95 1-1980-43 8.91 X $20.95 1-1981-43 10.70 X $36.95 44 1-1979-44 7.29 X $14.95 1-1980-44 9.11 X $21.95 1-1981-44 10.94 X $38.95 45 1-1979-45 7.45 X $15.25 1-1980-45 9.31 X $22.95 1-1981-45 11.18 X $38.95 46 1-1979-46 7.61 X $15.65 1-1980-46 9.51 X $23.95 1-1981-46 11.42 X $31.00 48 1-1979-48 7.93 X $17.35 1-1980-48 9.91 X $25.95 1-1981-48 11.89 X $32.95 50 1-1979-50 8.25 X $20.10 1-1980-50 10.31 X $27.95 – – – – 52 – – – – 1-1980-52 10.71 X $28.95 – – – – 54 1-1979-54 8.89 X $20.95 1-1980-54 11.11 X $32.95 1-1981-54 13.33 X $40.95 60 1-1979-60 9.84 X $23.95 1-1980-60 12.30 X $39.95 1-1981-60 14.76 X $40.95 72 1-1979-72 11.75 X $34.95 1-1980-72 14.69 X $47.95 – – – –

Shipping Weights

12-40 Teeth 2 lbs. 12-25 Teeth 2 lbs. 12-23 Teeth 3 lbs. 41-50 Teeth 4 lbs. 26-40 Teeth 4 lbs. 24-30 Teeth 4 lbs. 54-60 Teeth 5 lbs. 41-48 Teeth 7 lbs. 31-40 Teeth 8 lbs. 72 Teeth 9 lbs. 49-60 Teeth 11 lbs. 41-48 Teeth 12 lbs. 72 Teeth 17 lbs. 54-60 Teeth 19 lbs.

Weld-on Roller Chain Sprockets & Hubs

• Brand new. Weld on roller chain sprocket and hub assembly allows multiple combinationof bore to sprocket types. Hubs have machined pilot for sprocket to slip over for easyalignment and welding. Keyway slot and set screw furnished with hub.

ORDERING: Select sprocket by chain pitch and number of teeth,

ORDERING: THEN select hub with matching letter code (V, W, X) and desired bore size.

Bore V Hub W Hub X Hub ½˝ 1-2341-A 1-2342-A – 9/16˝ 1-2341-B 1-2342-B – ⅝˝ 1-2341-C 1-2342-C 1-2343-C 11/16˝ 1-2341-D 1-2342-D 1-2343-D ¾˝ 1-2341-E 1-2342-E 1-2343-E 13/16˝ 1-2341-F 1-2342-F 1-2343-F ⅞˝ 1-2341-G 1-2342-G 1-2343-G 15/16˝ – 1-2342-H 1-2343-H 1˝ – 1-2342-I 1-2343-I 11/16˝ – 1-2342-J 1-2343-J 1⅛˝ – 1-2342-K 1-2343-K 13/16˝ – 1-2342-L 1-2343-L 1¼˝ – 1-2342-M 1-2343-M 15/16˝ – – 1-2343-N 1⅜˝ – – 1-2343-O 17/16˝ – – 1-2343-P 1½˝ – – 1-2343-Q ¾˝ Hex – 1-2342-EHX – ⅞˝ Hex – 1-2342-GHX –1¼˝ Hex – 1-2342-MHX –1⅛˝ 6 Spl – 1-2342-KSP –1¼˝ 6 Spl – 1-2342-MSP – Shpg. 1 lb. 1½ lbs. 2 lbs. Price $4.00 $4.30 $5.65

1˝ 15 Spline BoreITEM 1-2342-15SP$14.55• W hub. Shpg. 1½ lbs.

1¾˝ 20 Spline BoreITEM 1-2343-20SPB$22.60• X hub. Shpg. 2 lbs.

Dimensions of Hubs

All hubs furnished with standard keywayand two setscrews. V Hub W Hub X Hub A 1⅛˝ A 1⅝˝ A 2˝ B 17/16˝ B 113/16˝ B 2½˝ C 7/16˝ C 7/16˝ C 7/16˝ D ¾˝ D 1˝ D 1˝ E 13/16˝ E 17/16˝ E 17/16˝

A B

CD

E

800-488-3407 Fixed Bore Sprockets 135&

Roller Chain Sprockets• Brand new ANSI standard sprockets. Fin-ished, keyed bore with set screw. Carbonsteel with heat-treated teeth.• Select an ITEM number for sprocket fromchart according to chain pitch, number ofteeth and add suffix letter according tobore size.Example: ITEM 1-2413-10-A is a 35 pitch sprocket with 10 teethand ½˝ bore. ITEMS 1-2413-10-AA and 1-2413-11-AA have no keyway.

35 Pitch Finished BoresITEM - Teeth OD ⅜˝ ½˝ ⅝˝ ¾˝ ⅞˝ 1˝ 1⅛˝ 13/16˝ 1¼˝ Price 1-2413-10 1.38˝ AA A B – – – – – – $3.20 1-2413-11 1.50˝ AA A B C – – – – – $3.50 1-2413-12 1.63˝ – A B C – – – – $3.65 1-2413-13 1.75˝ – A B C – – – – – $3.85 1-2413-14 1.87˝ – A B C – – – – – $3.85 1-2413-15 1.99˝ – A B C D E – – – $4.00 1-2413-16 2.11˝ – A B C D E – – – $4.40 1-2413-17 2.23˝ – A B C D E – – – $4.60 1-2413-18 2.35˝ – A B C D E – – – $4.95 1-2413-19 2.47˝ – A B C – E – – – $4.35 1-2413-20 2.59˝ – A B C – E – – – $4.80 1-2413-21 2.71˝ – A B C – E – – – $5.35 1-2413-22 2.83˝ – A B C – E – – – $5.60 1-2413-23 2.95˝ – A B C – E – – – $5.95 1-2413-24 3.07˝ – A B C – E – – – $6.30 1-2413-25 3.19˝ – A B C – E – – – $6.60 1-2413-26 3.31˝ – – B C D E F G H $7.35 1-2413-27 3.43˝ – – B C D E F G H $8.05 1-2413-28 3.55˝ – – B C D E F G H $8.75 1-2413-29 3.68˝ – – B C D E F G H $8.95 1-2413-30 3.79˝ – – B C D E F G H $9.70 1-2413-32 4.03˝ – – B C D E F G H $10.95 1-2413-35 4.39˝ – – B C D E F G H $12.95 1-2413-36 4.51˝ – – B C D E F G H $13.15 1-2413-40 4.99˝ – – B C D E F G H $15.60 1-2413-42 5.23˝ – – B C D E F G H $16.00 1-2413-45 5.59˝ – – B C D E F G H $18.00 1-2413-48 5.95˝ – – B C D E F G H $19.40 1-2413-54 6.66˝ – – B C D E F G H $20.95 1-2413-60 7.38˝ – – – C D E F G H $23.95 1-2413-72 8.81˝ – – – C D E F G H $29.95

40 Pitch Finished BoresITEM - Teeth OD ½˝ ⅝˝ ¾˝ ⅞˝ 1˝ 1⅛˝ 13/16˝ 1¼˝ 1⅜˝ 17/16˝ 1½˝ Price 1-2123-10 1.84˝ A B C – – – – – – – – $4.45 1-2123-11 2.00˝ A B C D – – – – – – – $4.65 1-2123-12 2.17˝ A B C D – – – – – – $4.80 1-2123-13 2.33˝ A B C D E – – – – – – $4.95 1-2123-14 2.49˝ A B C D E F G – – – – $4.40 1-2123-15 2.65˝ A B C D E F G H – – – $5.30 1-2123-16 2.81˝ – B C D E F G H – – – $5.60 1-2123-17 2.98˝ – B C D E F G H – – – $6.05 1-2123-18 3.14˝ – B C D E F G H I J K $6.60 1-2123-19 3.30˝ – B C D E F G H I J K $6.85 1-2123-20 3.46˝ – B C D E F G H I J K $7.30 1-2123-21 3.62˝ – B C – E F G H I J K $7.55 1-2123-22 3.78˝ – B C D E F G H I J K $8.00 1-2123-23 3.94˝ – B C D E F G H I J K $8.40 1-2123-24 4.10˝ – B C D E F G H I J K $9.15 1-2123-25 4.26˝ – – C D E F G H – J K $9.90 1-2123-26 4.42˝ – – C D E F G H – J K 10.10 1-2123-27 4.58˝ – – C D E F G H – – K 10.35 1-2123-28 4.74˝ – – C D E F G H – J K 10.95 1-2123-29 4.90˝ – – C D E F G H – – K 11.95 1-2123-30 5.06˝ – – C D E F G H – – K 12.05

Shipping Weights10-15 Teeth 1 lb. 16-25 Teeth 2 lbs. 26-72 Teeth 3 lbs.

Idler Sprockets• Brand new. Cast steel idler sprockets.Sealed ball bearings.

ITEM Pitch Bore Teeth O.D. Shpg. Price 1-2408-18-A 35 ½˝ 18 2.35˝ ½ $7.40 1-2408-18-B 35 ⅝˝ 18 2.35˝ ½ $7.40 1-2409-17-A 40 ½˝ 17 2.98˝ 1¼ $9.45 1-2409-17-B 40 ⅝˝ 17 2.98˝ 1¼ $9.45 1-2410-13-A 50 ½˝ 13 2.91˝ 1¼ $9.70 1-2410-13-B 50 ⅝˝ 13 2.91˝ 1¼ $9.70 1-2410-15-A 50 ½˝ 15 3.32˝ 1¾ $10.45 1-2410-15-B 50 ⅝˝ 15 3.32˝ 1¾ $10.45 1-2410-17-A 50 ½˝ 17 3.72˝ 2 $10.95 1-2410-17-B 50 ⅝˝ 17 3.72˝ 2 $10.95 1-2411-11-A 60 ½˝ 11 3.00˝ 1¼ $10.45 1-2411-11-B 60 ⅝˝ 11 3.00˝ 1¼ $10.45 1-2411-13-A 60 ½˝ 13 3.49˝ 1¾ $11.15 1-2411-13-B 60 ⅝˝ 13 3.49˝ 1¾ $11.15 1-2411-15-A 60 ½˝ 15 3.98˝ 3 $12.45 1-2411-15-B 60 ⅝˝ 15 3.98˝ 3 $12.45 1-2412-11-C 80 ¾˝ 11 4.01˝ 3 $18.15 1-2412-12-C 80 ¾˝ 12 4.33˝ 4 $18.75 1-2412-12-E 80 1˝ 12 4.33˝ 4 $18.75

25 PitchRoller Chain Sprockets

• Brand new ANSI standard sprockets. Fin-ished, unkeyed bore with two set screws.• Select an ITEM number from chart accord-ing to number of teeth and add suffix letter for

bore size.

Example: ITEM 1-2742-10-A is a 25 pitch sprocket with 10 teethand ¼˝ bore. Finished BoresITEM - Teeth OD ¼˝ 5/16˝ ⅜˝ ½˝ ⅝˝ ¾˝ Shpg. Price 1-2742-9 0.84˝ A – – – – – ⅛ lb. $2.70 1-2742-10 0.92˝ A – – – – – ⅛ lb. $2.95 1-2742-11 0.99˝ A B – – – – ⅛ lb. $3.20 1-2742-12 1.08˝ A B C – – – ⅛ lb. $3.35 1-2742-13 1.17˝ A B C – – – ⅛ lb. $3.55 1-2742-14 1.24˝ A B C D – – ¼ lb. $3.55 1-2742-15 1.33˝ A B C D – – ¼ lb. $3.70 1-2742-16 1.41˝ A B C D – – ¼ lb. $4.00 1-2742-17 1.49˝ A B C D E – ¼ lb. $4.20 1-2742-18 1.57˝ A B C D E F ¼ lb. $4.50 1-2742-19 1.65˝ A B C D E F ¼ lb. $4.75 1-2742-20 1.73˝ A B C D E F ½ lb. $4.40 1-2742-21 1.81˝ A B C D E F ½ lb. $4.90 1-2742-22 1.89˝ A B C D E F ½ lb. $5.10 1-2742-23 1.97˝ A B C D E F ½ lb. $5.55 1-2742-24 2.05˝ – – C D E F ½ lb. $5.75 1-2742-25 2.13˝ – – C D E F ½ lb. $6.20 1-2742-26 2.21˝ – – C D E F ½ lb. $6.75 1-2742-28 2.37˝ – – C D E F ½ lb. $8.00 1-2742-30 2.53˝ – – C D E F ½ lb. $8.90 1-2742-32 2.69˝ – – C D E F ¾ lb. $10.00 1-2742-35 2.94˝ – – C D E F ¾ lb. $11.95 1-2742-36 3.01˝ – – C D E F ¾ lb. $12.05 1-2742-40 3.33˝ – – – D E F 1¼ lb. $14.35 1-2742-42 3.51˝ – – – D E F 1¼ lb. $14.70 1-2742-45 3.73˝ – – – D E F 1¼ lb. $16.50 1-2742-48 3.96˝ – – – D E F 1¼ lb. $17.75 1-2742-54 4.44˝ – – – D E F 1½ lb. $19.25 1-2742-60 4.92˝ – – – D E F 2 lb. $21.95 1-2742-72 5.72˝ – – – D E F 3 lb. $27.95

136 Roller Chain Sprockets & Mower Spindles www.surpluscenter.com8

Mower BladePulleyAssembly

• New, cast aluminum, pulley driven bladedrive for commercial mowers. Featuresgrease zerk for bearings.SPECIFICATIONS • Internal thread M16-2.0• Belt size B (⅝˝) • Center of belt groove to• Mounting studs six blade mount face 5¼˝M8-1.25 on 7˝ B.C. • Size 8˝ dia. x 6˝

• Blade flange 2¼˝ dia. • Shpg. 10 lbs.

ITEM 1-4674 $18.95• Pulley is 5½˝ dia. single groove.

ITEM 1-4673 $18.95• Pulley is 5⅝˝ dia. single groove.

12 VDCClutchBrake

ITEM 1-4676$119.95• New. Warner Electric MagStop TG2000Model 521968 12 volt DC clutch/brake.Ideal replacement for mowers. Two boltmount. Plugin connector.SPECIFICATIONS • Rotation CCW• Voltage 12 DC • Mount 2 hole• Current 3.25 amps • Hub 1⅛˝ bore x 2¾˝• Torque rating 105 ft.lbs. w/integral key• Pulley 7˝ dia. 1 groove • Size 7˝ x 7½˝ x 3½˝• Belt width ¾˝ • Shpg. 13 lbs.

60 Pitch Finished BoresITEM - Teeth OD ¾˝ ⅞˝ 1˝ 1⅛˝ 13/16˝ 1¼˝ 1⅜˝ 17/16˝ 1½˝ 1⅝˝ 1¾˝ 1⅞˝ 115/16˝ 2˝ Shpg. Price 1-2125-10 2.76˝ C D E F G H – – – – – – – – 1¼ lb. $6.70 1-2125-11 3.00˝ C D E F G H – – – – – – – – 1¼ lb. $6.85 1-2125-12 3.25˝ C D E F G H – – – – – – – – 1¾ lb. $7.15 1-2125-13 3.49˝ C D E F G H I J K – – – – – 1¾ lb. $7.75 1-2125-14 3.74˝ C D E F G H I J K – – – – – 2 lb. $8.25 1-2125-15 3.98˝ C D E F G H I J K L M – – – 2 lb. $9.55 1-2125-16 4.22˝ C D E F G H I J K L M – O – 3 lb. $10.95 1-2125-17 4.46˝ – – E F G H I J K L M – O – 3 lb. $11.95 1-2125-18 4.70˝ – – E F G H I J K L M N O – 3 lb. $13.25 1-2125-19 4.95˝ – – E F G H I J K L M N O – 4 lb. $13.95 1-2125-20 5.19˝ – – E F G H I J K L M N O – 4 lb. $15.95 1-2125-21 5.43˝ – – E F G H I J K L M N O – 5 lb. $17.05 1-2125-22 5.67˝ – – E F G H – J K L M N O P 5 lb. $18.00 1-2125-23 5.91˝ – – E F G H I J K L M N O – 6 lb. $18.95 1-2125-24 6.15˝ – – E F G H I J K L M N O P 6 lb. $19.85 1-2125-26 6.63˝ – – E F G H I J K L M N O P 6 lb. $20.95 1-2125-27 6.87˝ – – E F G H I J K L M N O – 7 lb. $21.95 1-2125-28 7.11˝ – – E F G H I J K L M N O P 7 lb. $23.00 1-2125-30 7.59˝ – – E F G H I J K L M N O – 8 lb. $25.95 1-2125-32 8.07˝ – – E F G H I J K L M N O P 9 lb. $27.95 1-2125-35 8.78˝ – – E F G H I J K L M N O P 10 lb. $33.9580 Pitch Finished BoresITEM - Teeth OD ¾˝ ⅞˝ 1˝ 1⅛˝ 13/16˝ 1¼˝ 1⅜˝ 17/16˝ 1½˝ 1⅝˝ 1¾˝ 1⅞˝ 115/16˝ 2˝ Shpg. Price 1-2145-10 3.68˝ – – E F G H – – K – – – – – 2 lb. $11.95 1-2145-11 4.01˝ – – E F G H – J K – – – – – 3 lb. $12.95 1-2145-12 4.33˝ – – E F G H I J K L M – – – 4 lb. $13.95 1-2145-13 4.66˝ – – E F G H I J K – M – – P 4 lb. $15.35 1-2145-14 4.98˝ – – E F G H I J K L M N – P 5 lb. $16.30 1-2145-15 5.30˝ – – E F G H I J K L M – – P 6 lb. $19.15 1-2145-16 5.63˝ – – E F G H I J K L M – – P 6 lb. $20.95 1-2145-17 5.95˝ – – E F G H I J K L M N O P 7 lb. $21.95 1-2145-18 6.27˝ – – E F G H I J K L M N O P 8 lb. $23.95 1-2145-19 6.59˝ – – E F G H I J K L M N O P 8 lb. $26.95 1-2145-20 6.91˝ – – E F G H I J K L M N O P 9 lb. $28.95 1-2145-22 7.58˝ – – – – – – – – – – – – – P 9 lb. $38.95

Roller Chain Sprockets• Brand new ANSI standard sprockets. Finished, keyed bore tappedfor set screw (not included). Carbon steel with heat-treated teeth.• Select an ITEM number for sprocket from chart according to chainpitch, number of teeth and add suffix letter according to bore size.Example: ITEM 1-2123-10-A = 40 pitch sprocket, 10 teeth, ½˝ bore.50 Pitch Finished BoresITEM - Teeth OD ⅝˝ ¾˝ ⅞˝ 1˝ 1⅛˝ 13/16˝ 1¼˝ 1⅜˝ 17/16˝ 1½˝ 1⅝˝ Shpg. Price 1-2124-10 2.30˝ B C D E – – – – – – – ¾ lb. $5.30 1-2124-11 2.50˝ B C D E – – – – – – – 1 lb. $5.60 1-2124-12 2.71˝ B C D E F G H – – – – 1 lb. $5.85 1-2124-13 2.91˝ B C D E F G H – – – – 1¼ lb. $6.15 1-2124-14 3.11˝ B C D E F G H – – – – 1½ lb. $6.45 1-2124-15 3.32˝ B C D E F G H I J K – 1¾ lb. $6.65 1-2124-16 3.52˝ B C D E F G H I J K – 2 lb. $7.70 1-2124-17 3.72˝ B C D E F G H I J K – 2 lb. $8.10 1-2124-18 3.92˝ B C D E F G H I J K – 3 lb. $8.50 1-2124-19 4.12˝ B C D E F G H I J K L 3 lb. $8.90 1-2124-20 4.32˝ – – D E F G H I J K – 3 lb. $9.30 1-2124-21 4.52˝ – C D E F G H I J K – 3 lb. $9.75 1-2124-22 4.72˝ – C D E F G H I J K – 3 lb. $10.05 1-2124-23 4.92˝ – C D E F G H I J K – 3 lb. $10.45 1-2124-24 5.12˝ – C D E F G H I J K – 4 lb. $12.35 1-2124-25 5.32˝ – C D E F G H I J K – 4 lb. $12.95 1-2124-26 5.52˝ – C D E F G H I J K – 4 lb. $13.50 1-2124-27 5.72˝ – C D E F G H I J K – 4 lb. $14.15 1-2124-28 5.92˝ – C D E F G H I J K – 4 lb. $14.95 1-2124-30 6.32˝ – C D E F G H I J K – 5 lb. $16.75 1-2124-34 7.12˝ – C D E F G H I J K – 6 lb. $20.95 1-2124-40 8.32˝ – C D E F G H I J K – 7 lb. $24.95

1½˝ Bearing With¾˝ ShaftITEM 1-4156$5.99• New wide ball bearing block with steelshaft. Originally for fan/water pump. Part#8523526SPECIFICATIONS• Bearing size1½˝ dia. x 2⅛˝ wide • Shaft end 1: 2⅛˝ long

• Shaft ¾˝ dia. w/3/16˝ keyway• Overall length 5¼˝ • Shaft end 2: 1˝ long,• Shpg. 2 lbs. machined to 0.626 ̋for last ⅝˝

12 VDC Clutch/Brake

ITEM 1-4733$119.95• New. WARNER ELECTRIC MagStopTG2000 Model 521971 12 volt DCclutch/brake. Ideal replacement for mow-ers. Two bolt mount. Plug-in connector.SPECIFICATIONS • Rotation CCW• Voltage 12 DC • Mount 2 hole• Current 3.25 amps • Hub 1⅛˝ bore x 2¾˝• Torque rating 105 ft.lbs. w/integral key• Pulley 6¼˝ dia. 1 groove • Size 7˝ x 7½˝ x 3½˝• Belt width ¾˝ • Shpg. 13 lbs.

800-488-3407 Roller Chain & Links 137&

35-60 Pitch RollerChain HolderITEM 14-1114$12.95• Brand new. Holds two ends of a lengthof roller chain together so connecting linkcan be inserted.SPECIFICATIONS• Compatible chain 35-60 pitch • Shpg. 1 lb.

Roller Chain LoopITEM 1-4345$4.95• New, ANSI standard riveted roller chain.Continuous loop of roller chain.SPECIFICATIONS • Length 48˝ (96 Links)• Pitch 25 • Shpg. 1 lb.

RollerChain

Breakers

• Easily dismantle roller chain without usinghammer or punch. Replaceable tip.

ITEM 14-1037 $15.00• For 25 to 60 pitch chain. Shpg. 1 lb.

ITEM 14-1037-2 $27.95• For 60 to 100 pitch chain. Shpg. 3 lbs.

1 Strand Roller ChainLengths

• New, ANSI standard riveted roller chainin various lengths. More sizes online!

ITEM Pitch Lgth. Type Shpg. Price1-4830 35 21¼˝ R ¾ lb. $ 1.851-4829 35 27˝ R ¾ lb. $ 1.991-2549 41 27˝ R 1 lbs. $ 3.951-1163-41 41 10 ft. R 5 lbs. $15.991-1873-A 65 (43) 33˝ R 1 lbs. $ 1.951-1873-B 65 (43) 71˝ R 2 lbs. $ 4.951-1941 65 (43) 246˝ R 6 lbs. $17.95

Roller Chain & Links• Brand new, roller chain. Meets all ANSI standards. Available in 10 ft boxes in standard, heavy (thicker side plates) and double strandstyles. One connecting link included in each box to make into a continuous loop.• Connecting links are spring clip style except for100 and 120 chain that use cotter pins to retain side plate.

Single Roller Chain & LinksUltimate 10 Ft. Box Connecting Link Offset (half) Link

Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price25 ( ¼˝ ) 925 lbs. 1-1163-25 2 lbs. $14.95 1-1087-25 0.1 lb. $ .55 1-1086-25 0.1 lb. $1.0035 ( ⅜˝ ) 2100 lbs. 1-1163-35 3 lbs. $14.95 1-1087-35 0.1 lb. $ .35 1-1086-35 0.1 lb. $ .7040 ( ½˝ ) 3700 lbs. 1-1163-40 5 lbs. $13.95 1-1087-40 0.1 lb. $ .35 1-1086-40 0.1 lb. $ .6050 ( ⅝˝ ) 6100 lbs. 1-1163-50 7 lbs. $18.95 1-1087-50 0.1 lb. $ .45 1-1086-50 0.1 lb. $ .8560 ( ¾˝ ) 8500 lbs. 1-1163-60 10 lbs. $26.95 1-1087-60 0.1 lb. $ .65 1-1086-60 0.1 lb. $1.1080 ( 1˝ ) 14,500 lbs. 1-1163-80 18 lbs. $42.95 1-1087-80 0.1 lb. $1.15 1-1086-80 0.1 lb. $2.15100 ( 1¼˝ ) 24,000 lbs. 1-1163-100 31 lbs. $65.95 1-1087-100 0.3 lb. $2.15 1-1086-100 0.3 lb. $3.60120 ( 1½˝ ) 34,000 lbs. 1-1163-120 42 lbs. $102.95 1-1087-120 0.3 lb. $3.20 1-1086-120 0.3 lb. $4.35

Stainless Steel Chain & LinksUltimate 10 Ft. Box Connecting Link Offset (half) Link

Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price40 ( ½˝ ) 3700 lbs. 1-1163-40-SS 5 lbs. $59.95 1-1087-40-SS 0.25 lb. $1.70 1-1086-40-SS 0.25 lb. $2.6550 ( ⅝˝ ) 6100 lbs. 1-1163-50-SS 7 lbs. $92.95 1-1087-50-SS 0.25 lb. $2.40 1-1086-50-SS 0.25 lb. $3.6060 ( ¾˝ ) 8500 lbs. 1-1163-60-SS 12 lbs. $127.95 1-1087-60-SS 0.25 lb. $2.75 1-1086-60-SS 0.25 lb. $3.7580 ( 1˝ ) 14,500 lbs. 1-1163-80-SS 18 lbs. $212.95 1-1087-80-SS 0.25 lb. $4.70 1-1086-80-SS 0.25 lb. $6.40

Heavy Single Roller Chain & LinksUltimate 10 Ft. Box Connecting Link Offset (half) Link

Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price50H ( ⅝˝ ) 6100 lbs. 1-1163-50-H 12 lbs. $22.95 1-1087-50-H 0.1 lb. $ .60 1-1086-50-H 0.1 lb. $1.1560H ( ¾˝ ) 8500 lbs. 1-1163-60-H 16 lbs. $33.00 1-1087-60-H 0.1 lb. $ .60 1-1086-60-H 0.1 lb. $1.3580H ( 1˝ ) 14,500 lbs. 1-1163-80-H 25 lbs. $54.00 1-1087-80-H 0.1 lb. $1.70 1-1086-80-H 0.1 lb. $2.85

Double Roller Chain & LinksUltimate 10 Ft. Box Connecting Link Offset (half) Link

Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price40-2 ( ½˝ ) 8400 lbs. 1-1163-40-2 12 lbs. $24.00 1-1087-40-2 0.25 lb. $ .70 1-1086-40-2 0.25 lb. $1.1550-2 ( ⅝˝ ) 14,000 lbs. 1-1163-50-2 18 lbs. $39.00 1-1087-50-2 0.25 lb. $ .90 1-1086-50-2 0.25 lb. $1.5060-2 ( ¾˝ ) 19,400 lbs. 1-1163-60-2 25 lbs. $52.95 1-1087-60-2 0.25 lb. $1.25 1-1086-60-2 0.25 lb. $1.9580-2 ( 1˝ ) 29,000 lbs. 1-1163-80-2 39 lbs. $85.95 1-1087-80-2 0.25 lb. $2.70 1-1086-80-2 0.25 lb. $3.50

138 Shafting, Lead Screws & U-joints www.surpluscenter.com8Square ShaftITEM 1-3524$37.95• Brand new, square shafting. Drivelineshafting grade steel.SPECIFICATIONS • Length 72˝• Size ⅞˝ square • Shpg. 17 lbs.

Keyed Shafting

• Brand new. 36˝ or 72˝ lengths of C1018 cold-drawn steel, full length keyway.

3 ft. Lengths 6 ft. Lengths O.D. Keyway ITEM Shpg. Price ITEM Shpg. Price ½˝ ⅛˝ x 1/16˝ 1-2982-50-3 3 lbs. $16.95 1-2982-50-6 6 lbs. $30.95 ⅝˝ 3/16˝ x 3/32˝ 1-2982-62-3 4 lbs. $18.95 1-2982-62-6 8 lbs. $35.95 ¾˝ 3/16˝ x 3/32˝ 1-2982-75-3 6 lbs. $21.95 1-2982-75-6 12 lbs. $32.95 ⅞˝ 3/16˝ x 3/32˝ 1-2982-87-3 7 lbs. $26.95 1-2982-87-6 14 lbs. $40.95 1˝ ¼˝ x ⅛˝ 1-2982-100-3 9 lbs. $26.95 1-2982-100-6 18 lbs. $40.95 1⅛˝ ¼˝ x ⅛˝ 1-2982-112-3 12 lbs. $32.95 1-2982-112-6 24 lbs. $48.95 1¼˝ ¼˝ x ⅛˝ 1-2982-125-A-3 14 lbs. $38.95 1-2982-125-A-6 28 lbs. $57.95 1¼˝ 5/16˝ x ⅛˝ 1-2982-125-B-3 14 lbs. $39.85 1-2982-125-B-6 28 lbs. $79.75 1⅜˝ 5/16˝ x 5/32˝ 1-2982-137-3 16 lbs. $33.95 1-2982-137-6 32 lbs. $67.95 1½˝ ⅜˝ x 3/16˝ 1-2982-150-3 19 lbs. $39.95 1-2982-150-6 38 lbs. $78.95

Lead Screws & Nuts• Brand new, G & G MFG. ACME lead screws and nuts (sold separately). 36˝ or 72˝lengths of 1010/1018 class 2G rolled threads. Plain finish. Right-hand thread. Hex nutsfor ACME lead screws. 12L14 screw stock. Plain finish.

3 ft. Screws 6 ft. Screws Nuts Size & Pitch ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ½˝-10 1-2983-50-3 3 lbs. $ 9.85 1-2983-50-6 5 lbs. $ 16.75 1-2984-50N ¼ lb. $ 3.20 ¾˝-6 1-2983-75-3 5 lbs. $15.80 1-2983-75-6 10 lbs. $ 27.95 1-2984-75N ¼ lb. $ 4.95 1˝-4 1-2983-100-3 7 lbs. $29.95 1-2983-100-6 14 lbs. $ 52.95 1-2984-100N ½ lb. $ 8.05 1¼˝-5 1-2983-125-3 12 lbs. $52.95 1-2983-125-6 24 lbs. $ 92.95 1-2984-125N 1 lb. $ 9.80 1½˝-4 1-2983-150-3 16 lbs. $62.65 1-2983-150-6 32 lbs. $125.30 1-2984-150N 1½ lb. $21.95Universal Joints

• Brand new. Cold-formed, carbon steel yokes. Greasezerk for the bearings. HP at Yoke Width ITEM Bore Series Bearings Cross Dia 540 RPM 1000 RPM Inside Outside Size Shpg Price 1-2728 1˝ 4P Journal ⅞˝ 5 9 123/64˝ 1⅞˝ 4⅞˝ x 2˝ x 2˝ 4 lbs. $30.75 1-2729 ¾˝ 6N Needle 31/32˝ 12 22 17/16˝ 2¼˝ 5˝ x 2¼˝ x 2¼˝ 4 lbs. $37.35 1-2730 1˝ 6N Needle 31/32˝ 12 22 17/16˝ 2¼˝ 5˝ x 2¼˝ x 2¼˝ 5 lbs. $37.35 1-2731 1˝ 12N Needle 11/16˝ 28 52 113/16˝ 2½˝ 7˝ x 2⅞˝ x 2⅞˝ 6 lbs. $52.95 1-2732 1¼˝ 12N Needle 11/16˝ 28 52 113/16˝ 2½˝ 7˝ x 2⅞˝ x 2⅞˝ 6 lbs. $52.95

HexShafting

• Brand new, hex shafting. Driveline shaft-ing grade steel.

HexITEM Size Lgth. Shpg. Price

1-3525-87 ⅞˝ 72˝ 14 lbs. $25.951-3525-112 1⅛˝ 72˝ 23 lbs. $47.95

Splined Shafts

• Brand new, G & G Mfg. Black oxide finished steel.Spline Spline Overall Overall Retention

ITEM Model Spline Location Lgth. Lgth. O.D. Groove Inset Shpg. Price1-3092-6 106A1615 1˝ 15T One end 3˝ 6˝ 1˝ 1˝ 3 lbs. $22.301-3092-12 112A1615 1˝ 15T One end 2¾˝ 12˝ 1˝ 1˝ 4 lbs. $23.851-3091 112B1615 1˝ 15T Both ends 2¾˝ 12˝ 1˝ 1˝ 4 lbs. $29.601-3090 112F1615 1˝ 15T Full 12˝ 12˝ 1˝ – 4 lbs. $57.951-3442 106A2014 1¼˝ 14T One end 2⅝˝ 6˝ 1¼˝ – 4 lbs. $11.951-2935-6 106A2206 1⅜˝ 6T One end 3˝ 6˝ 1⅜˝ ⅞˝ 4 lbs. $17.951-2935-12 112A2206 1⅜˝ 6T One end 2¾˝ 12˝ 1⅜˝ ⅞˝ 7 lbs. $30.951-2937-6 112B2206 1⅜˝ 6T Both ends 2¾˝ 12˝ 1⅜˝ ⅞˝ 7 lbs. $45.951-2938-6 112F2206 1⅜˝ 6T Full 12˝ 12˝ 1⅜˝ – 7 lbs. $65.951-4803-12 112A2820 1¾˝ 20T One end 3˝ 12˝ 1¾˝ 1˝ 8 lbs. $51.001-4023 112B2820 1¾˝ 20T Both ends 3˝ 12˝ 1¾˝ 1˝ 8 lbs. $61.801-4022 112F2820 1¾˝ 20T Full 12˝ 12˝ 1¾˝ – 8 lbs. $79.201-2936-6 106A2221 1⅜˝ 21T One end 2¾˝ 6˝ 1⅜˝ ⅞˝ 4 lbs. $21.951-2936-12 112A2221 1⅜˝ 21T One end 2¾˝ 12˝ 1⅜˝ ⅞˝ 7 lbs. $32.951-2937-21 112B2221 1⅜˝ 21T Both ends 2¾˝ 12˝ 1⅜˝ ⅞˝ 7 lbs. $42.401-2938-21 112F2221 1⅜˝ 21T Full 12˝ 12˝ 1⅜˝ – 7 lbs. $79.25

6T 14T 15T 20T 21T

1-3442 1-3092 1-3090 1-3091

800-488-3407 Shaft Collars & Splined Hitch Adapters 139&

3 PointRatchetJack

ITEM 1-3964 $32.99• New, BULLDOG Model 690058 ratchetjack to adjust 3 point hitch on tractors.Plated clevis ends (no pins). Grease zerksfor threads.SPECIFICATIONS • Clevis inner width 11/16˝• Travel 3˝ • Handle 10˝• Load capacity • Thread size 1⅛-5 ACME16,000 lbs. tension • Retracted lgth. adj. 15-16½˝

• Clevis pin holes 1˝ • Shpg. 12 lbs.

3 lb. MechanicalTension

Reel

ITEM 1-4097$3.95

• New, VULCAN SPRING mechanicalspring reel. Use for counter balance, re-trieval and return. All stainless steel con-struction.SPECIFICATIONS• Spring force 3 lbs. • Mount 4 holes 2˝ x 1½˝• Maximum travel 44˝ • Size 2½˝ x 2˝ x 1˝• Cable eyelet 3/16˝ ID • Shpg. 1 lb.

Tractor PTOAdapterITEM 1-1655$46.80• New. Use to connect hydraulic or waterpumps direct to tractor PTO.SPECIFICATIONS• Splined end 1⅜˝ 6 tooth spline, 2½˝ deep• Keyed end ⅞˝ dia. x 2½˝ deep, 3/16˝ keyway• Overall size 1¾˝ dia. x 5˝ • Shpg. 3 lbs.

Snap HitchPumpAdapters

• Brand new G & G. Snap hitch adapters.Slides onto standard 1⅜˝ splined PTOshaft and spring-loaded retention pinholds adapter onto PTO shaft retentiongroove. Painted steel construction. Size4⅛˝ x 2½˝ x 2⅛˝. Shpg. 4 lbs.

ITEM # ITEM # Round 6T 21T Bore Keyway Price

1-2455 1-2462 ⅝˝ 3/16˝ $49.75 1-2456 1-2465 ¾˝ 3/16˝ $49.75 1-2457 1-2466 ⅞˝ 3/16˝ & ¼˝ $53.55 1-2458 1-2467 15/16˝ ¼˝ $49.75 1-2459 1-2468 1˝ ¼˝ $49.75

Splined PTOAdapters

• Brand new, G & G Mfg. Co. Adapts keyedshaft to 1⅜˝ 6 tooth spline. Shpg 4 lbs.

Female ITEM Bore Size Price 1-2241 1˝ 2˝ diam. x 5¾˝ $28.95 1-2242 1¼˝ 2˝ diam. x 5⅞˝ $27.90 1-2970 1½˝ 2¼˝ diam. 5⅞˝ $32.95

Steel Shaft Collars• Brand new. Solid collars include a set screw, split collars include clamping screws.

Choose from three collar styles.

Solid Single Split Double Split Shaft Shaft Shaft Collars Collars Collars Zinc Plated Black Oxide Finish Black Oxide Finish

ITEM Bore O.D. Width Price ITEM Bore O.D. Width Price ITEM Bore O.D. Width Price Shpg.1-2766-18 3/16˝ 7/16˝ ¼˝ $ .70 1-2767-18 3/16˝ ⅝˝ 5/16˝ $2.90 1-2768-18 3/16˝ ⅝˝ 5/16˝ $4.65 0.1 lb.1-2766-25 ¼˝ ½˝ 5/16˝ $ .75 1-2767-25 ¼˝ 11/16˝ 5/16˝ $2.90 1-2768-25 ¼˝ 11/16˝ 5/16˝ $4.65 0.1 lb.1-2766-31 5/16˝ ⅝˝ 5/16˝ $ .90 1-2767-31 5/16˝ 11/16˝ 5/16˝ $2.90 1-2768-31 5/16˝ 11/16˝ 5/16˝ $4.65 0.1 lb.1-2766-37 ⅜˝ ¾˝ ⅜˝ $1.00 1-2767-37 ⅜˝ ⅞˝ 11/32˝ $3.05 1-2768-37 ⅜˝ ⅞˝ 11/32˝ $4.80 0.1 lb.1-2766-43 7/16˝ ⅞˝ 7/16˝ $1.10 1-2767-43 7/16˝ 15/16˝ ⅜˝ $3.05 1-2768-43 7/16˝ 15/16˝ ⅜˝ $4.90 0.1 lb.1-2766-50 ½˝ 1˝ 7/16˝ $1.30 1-2767-50 ½˝ 1⅛˝ 13/32˝ $3.30 1-2768-50 ½˝ 11/8˝ 13/32˝ $4.25 0.1 lb.1-2766-62 ⅝˝ 1⅛˝ ½˝ $1.35 1-2767-62 ⅝˝ 15/16˝ 7/16˝ $3.65 1-2768-62 ⅝˝ 15/16˝ 7/16˝ $4.60 0.1 lb.1-2766-75 ¾˝ 1¼˝ 9/16˝ $1.65 1-2767-75 ¾˝ 1½˝ ½˝ $3.90 1-2768-75 ¾˝ 1½˝ ½˝ $4.85 0.1 lb.1-2766-87 ⅞˝ 1½˝ 9/16˝ $1.95 1-2767-87 ⅞˝ 1⅝˝ ½˝ $4.30 1-2768-87 ⅞˝ 1⅝˝ ½˝ $5.10 0.2 lb.1-2766-93 15/16˝ 1½˝ 9/16˝ $1.95 1-2767-93 15/16˝ 1¾˝ ½˝ $4.90 1-2768-93 15/16˝ 1¾˝ ½˝ $5.60 0.2 lb.1-2766-100 1˝ 1⅝˝ ⅝˝ $2.40 1-2767-100 1˝ 1¾˝ ½˝ $4.90 1-2768-100 1˝ 1¾˝ ½˝ $5.60 0.3 lb.1-2766-112 1⅛˝ 1¾˝ ⅝˝ $2.80 1-2767-112 1⅛˝ 1⅞˝ ½˝ $4.90 1-2768-112 1⅛˝ 1⅞˝ ½˝ $5.60 0.4 lb.1-2766-118 13/16˝ 2˝ 11/16˝ $2.90 1-2767-118 13/16˝ 21/16˝ ½˝ $4.35 1-2768-118 13/16˝ 21/16˝ ½˝ $5.90 0.4 lb.1-2766-125 1¼˝ 2˝ 11/16˝ $2.90 1-2767-125 1¼˝ 21/16˝ ½˝ $4.35 1-2768-125 1¼˝ 21/16˝ ½˝ $5.90 0.5 lb.1-2766-137 1⅜˝ 2⅛˝ ¾˝ $3.45 1-2767-137 1⅜˝ 2¼˝ 9/16˝ $4.85 1-2768-137 1⅜˝ 2¼˝ 9/16˝ $6.40 0.6 lb.1-2766-143 17/16˝ 2¼˝ ¾˝ $3.45 1-2767-143 17/16˝ 2¼˝ 9/16˝ $4.85 1-2768-143 17/16˝ 2¼˝ 9/16˝ $6.40 0.6 lb.1-2766-150 1½˝ 2¼˝ ¾˝ $3.45 1-2767-150 1½˝ 2⅜˝ 9/16˝ $5.15 1-2768-150 1½˝ 2⅜˝ 9/16˝ $6.70 0.6 lb.1-2766-162 1⅝˝ 2½˝ 13/16˝ $4.35 1-2767-162 1⅝˝ 2⅝˝ 11/16˝ $6.20 1-2768-162 1⅝˝ 2⅝˝ 11/16˝ $7.70 0.7 lb.1-2766-168 111/16˝ 2½˝ 13/16˝ $4.35 1-2767-168 111/16˝ 2¾˝ 11/16˝ $6.85 1-2768-168 111/16˝ 2¾˝ 11/16˝ $8.40 0.7 lb.1-2766-175 1¾˝ 2¾˝ ⅞˝ $4.65 1-2767-175 1¾˝ 2¾˝ 11/16˝ $6.85 1-2768-175 1¾˝ 2¾˝ 11/16˝ $8.40 0.8 lb.1-2766-187 1⅞˝ 2¾˝ ⅞˝ $4.65 1-2767-187 1⅞˝ 2⅞˝ 11/16˝ $6.85 1-2768-187 1⅞˝ 2⅞˝ 11/16˝ $8.40 0.8 lb.1-2766-193 115/16˝ 3˝ ⅞˝ $5.15 1-2767-193 115/16˝ 3˝ 11/16˝ $7.40 1-2768-193 115/16˝ 3˝ 11/16˝ $9.00 0.9 lb.1-2766-200 2˝ 3˝ ⅞˝ $5.15 1-2767-200 2˝ 3˝ 11/16˝ $7.40 1-2768-200 2˝ 3˝ 11/16˝ $9.00 0.9 lb.

¾ -16 Swivel EyeRod EndITEM 1-3778$10.95• New, Radial Bearing Corporation ModelRF-12TH high strength precision swiveleye rod end. Chrome moly ball with Teflonfabric liner, steel housing.SPECIFICATIONS • Misalignment angle• Body 14° max.female right hand thread • Thread size ¾-16

• Swivel eye bore ¾˝ diam. • End to center 2.875˝• Length thru bore ⅞˝ • Wrench flat 1˝• Max. statis load 28,081 lbs. • Shpg. 1 lb.

140 PTO Shafts & Double Roller Chain Couplers www.surpluscenter.com8

Jack Shafts

• New BUSH HOG jack shafts. Steel shaftand joint shielding at coupler end.

63/99 HP, 33.42˝ to 42.67˝

ITEM 1-3722-B $49.99SPECIFICATIONS• Power • End 1:63 HP at 540 RPM 1¾-20T spline w/int. bolt99 HP at 1000 RPM • End 2: 1⅜-21T x 3˝ male

• Series/Category 60 • Shaft nominal dia.• Lgth. end-to-end min. 33.42˝ 1.77˝ inner, 2.126˝ outer• Shaft Type Tri-lobe • Shpg. 30 lbs.

90/144 HP, 29.66˝ITEM 1-3722-I $49.99SPECIFICATIONS • End 1: 1¾-20T spline• Power w/clamp & int. bolt90 HP at 540 RPM • End 2: 1¾-20T male144 HP at 1000 RPM • Shaft type square

• Series/Category 1440 • Shaft size 15/16˝ x 15/16˝• Lgth. end-to-end min. 29.66˝• Shpg. 31 lbs.

90/144 HP, 30.94˝ITEM 1-3722-H $49.99SPECIFICATIONS • End 1: 1¾-20T spline• Power w/clamp & int. bolt90 HP at 540 RPM • End 2: 1¾-20T male144 HP at 1000 RPM • Shaft type square

• Series/Category 1440 • Shaft size 15/16˝ x 15/16˝• Lgth. end-to-end min. 30.94˝ • Shpg. 31 lbs.

1⅝˝ x 16¼˝ Steel Roller

ITEM 1-2723 $7.99• New, painted steel roller with bearings atboth ends. Steel shafts.SPECIFICATIONS• 1⅝˝ roller O.D. • 16¼˝ roller length• Both ends: 15/32˝ dia. x 1˝ long shaft w/ tapped cross-hole• Shpg. 4 lb.

PTO Shafts

63 HP, 33.25˝ITEM 1-3720-A $99.99• New BUSH HOG Model 50041190 fixedlength PTO shaft. Plastic shaft and jointshielding.SPECIFICATIONS • End 1: 1⅜-6T slide collar• Power 63 HP at 540 RPM • End 2: 1⅜-21T w/ int. bolt• Series/Category T60 • Shaft nominal dia.• Lgth. end-to-end min. 33.25˝ 1.77˝ inner, 2.126˝ outer• Shaft Type Tri-Lobe • Shpg. 32 lbs.

65/120 HP, 30 to 38˝ITEM 1-4192 $139.95• New WEASLER. JOHN DEERE partAH143302. Plastic shielding.SPECIFICATIONS • End 1: 1¾-20T• Power w/quik lock sleeve65 HP at 540 RPM • End 2: 1¾-20T120 hp at1000 RPM w/⅛˝ pin hole

• Series/Category 35N • U-joint 37/32˝ across,• Lgth. end-to-end min. 30˝ 1¼˝ dia. caps• Travel 8˝ • Shpg. 40 lbs.

Double Roller Chain Couplers

• Brand new. Three piece chain coupler consist of two sprocketsconnected together with double roller chain. Sold as individualhalves and chain. Purchase two halves and one coupler chain tomake a complete coupling.

Max. Max. Torque Coupling CoupledPitch & Tooth Count RPM Ft.-Lbs. Max HP at RPM O.D. Length40 Pitch 16 Tooth 5000 80.5 73.6 at 4800 RPM 3.03˝ 3.44˝50 Pitch 16 Tooth 4000 159.6 109.4 at 3600 RPM 3.78˝ 3.92˝60 Pitch 18 Tooth 3000 407.5 194.5 at 2500 RPM 5˝ 4.86˝

Keyed Half • Furnished with standard keyway and setscrews.

40 Pitch 16 Tooth 50 Pitch 16 Tooth 60 Pitch 18 ToothBore Size ITEM ITEM ITEM

⅝˝ 1-4050-B 1-4051-B —¾˝ 1-4050-C 1-4051-C —⅞˝ 1-4050-D 1-4051-D —1˝ 1-4050-E 1-4051-E 1-4053-E1⅛˝ 1-4050-F 1-4051-F 1-4053-F13/16˝ — 1-4051-G 1-4053-G1¼˝ — 1-4051-H 1-4053-H1⅜˝ — 1-4051-I 1-4053-I17/16˝ — 1-4051-J 1-4053-J1½˝ — 1-4051-K 1-4053-K1⅝˝ — 1-4051-L 1-4053-L1¾˝ — — 1-4053-M1⅞˝ — — 1-4053-N115/16˝ — — 1-4053-O2˝ — — 1-4053-P2⅛˝ — — 1-4053-Q2¼˝ — — 1-4053-R2⅜˝ — — 1-4053-S27/16˝ — — 1-4053-TShpg. 2 lbs. 3 lbs. 7 lbs.Price $9.45 $11.70 $20.35

Smooth Bore Half • Plain bore, no keyway or setscrews.

Machinable 40 Pitch 16 Tooth 50 Pitch 16 Tooth 60 Pitch 18 ToothBore Range ITEM ITEM ITEM⅝˝ - 1⅛˝ 1-4050-SB — —⅝˝ - 1⅝˝ — 1-4051-SB —1˝ - 27/16˝ — — 1-4053-SBShpg. 2 lbs. 3 lbs. 7 lbs.Price $8.20 $10.20 $19.20

Double Roller Chain with Connecting Link

40 Pitch 16 Tooth 50 Pitch 16 Tooth 60 Pitch 18 ToothITEM 1-4050-X 1-4051-X 1-4053-XShpg. ½ lb. 1½ lbs. 3 lbs.Price $4.00 $6.00 $10.65

Coupling Covers• Brand new. Shock coupling covers recommended to obtain maximumcoupling life. Aluminum covers are made as halves for easy installation.

40 Pitch 16 Tooth 50 Pitch 16 Tooth 60 Pitch 18 ToothITEM 1-4050-CC 1-4051-CC 1-4053-CCShpg. 1 lb. 1½ lbs. 3 lbs.Price $18.30 $23.65 $31.95

50 Amp, 230 VAC CordITEM 11-3398-4 $8.95SPECIFICATIONS • 50 amp range cord• Conductor 1 and 2: Gauge 6 • End 1: NEMA 10-50P plug• Conductor 3: Gauge 8 • End 2: ¼˝ ID brass• Jacketing Type SRDT ring connectors• Length 4 ft. • Shpg. 2 lbs.

50 ft. 16/3 Yellow Extension CordITEM 11-3488 $9.95• New, GENERAL FLOORCRAFTyellow jacketed extension cord.SPECIFICATIONS• Length 50 ft. • Color Yellow• Conductors 16/3 • Jacket ST • Shpg. 6 lbs.

800-488-3407 Flexible & Spline Couplings 141&

Solid Shaft Couplers• Brand new. Rigid steel couplers for connecting shafts together. Madefrom cold rolled steel. Keyed couplers have keyway slot and 2 set screws.

Keyed Shaft Couplers Spline Shaft Couplers

ITEM Bore O.D. Lgth. Shpg. Price1-1495 ⅝˝ 9 T 1¼˝ 1¼˝ 1 lb. $ 9.701-2985 ¾˝ 11 T 1½˝ 2¼˝ 2 lbs. $13.201-1392 ⅞˝ 13 T 1½˝ 2¼˝ 2 lbs. $ 7.601-1560 1˝ 6 T 1½˝ 2¼˝ 1 lb. $ 9.251-1561 1˝ 15 T 1½˝ 2¼˝ 1 lb. $ 9.701-1393 1¼˝ 14 T 2˝ 2¼˝ 2 lbs. $11.951-1562 1⅜˝ 6 T 2˝ 5˝ 3 lbs. $23.951-3556 1⅜˝ 21 T 2˝ 2¼˝ 2 lbs. $15.951-1513 1½˝ 17 T 2⅛˝ 2˝ 2 lbs. $13.50

ITEM Bore O.D. Lgth. Keyway Shpg. Price 1-1563-A ½˝ 1¼˝ 2˝ ⅛˝ 1 lb. $ 4.80 1-1563-B ⅝˝ 1½˝ 2½˝ 3/16˝ 1 lb. $ 6.15 1-1563-C ¾˝ 1⅝˝ 3˝ 3/16˝ 2 lbs. $ 7.55 1-1563-D ⅞˝ 1¾˝ 3½˝ 3/16˝ 2 lbs. $ 7.65 1-1563-E 1˝ 1¾˝ 4˝ ¼˝ 2 lbs. $10.20 1-1563-F 1⅛˝ 2˝ 4½˝ ¼˝ 3 lbs. $13.95 1-1563-G 1¼˝ 2⅛˝ 4½˝ ¼˝ 3 lbs. $14.30 1-1563-J 1¼˝ 2⅛˝ 4½˝ 5/16˝ 3 lbs. $14.30 1-1563-H 1⅜˝ 25/16˝ 4½˝ 5/16˝ 4 lbs. $15.45 1-1563-I 1½˝ 2½˝ 4½˝ ⅜˝ 4 lbs. $19.10

3 Piece Flexible & Spline Couplings• Brand new, 3-piece flexible couplings. Use to connect engines or electric motors to pumps, gear re-ducers, drive shafts. Purchase two halves and one flexible insert to make a complete coupling. Insertsare available in either rubber or urethane construction. Urethane gives longer life and 50% greater torquehandling capability. Splined halves are available for use with hydraulic pumps.• Interchangeable with L Series jaw couplings from Lovejoy, Browning and others.• Some series can be interchanged to reduce overall length. Series Interchangeablity:

L-090 with L-095 coupled length will be 25/16˝ L-099 with L-100 coupled length will be 33/16˝Example:

A complete coupling for 10 HP at 3600 RPM coupling a ½˝ dia. shaft and a ⅝˝ 9 tooth splined shaft.Order one each of

1-3421-E (L-095 Series ½˝ bore keyed coupling half)1-3421-9 (L-095 Series ⅝˝ 9 tooth splined coupling half)

1-3421-X (L-095 Series rubber insert)

Performance Ratings with Rubber InsertCoupling Rated HP Rating Based on Speed (RPM) Coupling CoupledSeries Torque (in-lbs.) 100 300 1200 1800 3600 O.D. LengthL-050 28 0.04 0.12 0.48 0.72 1.44 15/64˝ 123/32˝L-070 37 0.06 0.18 0.72 1.08 2.16 1⅜˝ 2˝L-075 73 0.12 0.36 1.44 2.16 4.32 1¾˝ 2⅛˝L-090 126 0.20 0.60 2.40 3.60 7.20 2⅛˝ 211/32˝L-095 169 0.28 0.84 3.36 5.04 10.08 27/64˝ 2½˝L-099 260 0.42 1.26 5.04 7.56 15.10 217/32˝ 2⅞˝L-100 370 0.60 1.80 7.20 10.80 21.60 217/32˝ 3½˝L-110 680 1.10 3.30 13.20 19.80 39.60 35/16˝ 47/32˝

Flexible Coupling Halves Splined Coupling Halves PerCoupling ITEM Bore Sizes Per Half 9 Tooth 11 Tooth 13 Tooth Per Half Half Series Prefix ¼˝ 5/16˝ ⅜˝ 7/16˝ ½˝ 9/16˝ ⅝˝ ⅝˝ ¾˝ ⅞˝ 15/16˝ 1˝ 1⅛˝ 1¼˝ 1⅜˝ 17/16˝ 1½˝ 1⅝˝ Price ⅝˝ ¾˝ ⅞˝ Price Shpg.

L-050 1-3419 A B C D E - G - - - - - - - - - - $ 3.75 ½ L-070 1-3614 - - - - E - G - H - - - - - - - - $ 4.75 ¾ L-075 1-3420 - - - D E - G G-156 H J - - - - - - - $ 5.30 ¾ L-090 1-3615 - - - - E - G - - - - - - - - - - $ 6.50 9 11 13 $18.00 1 L-095 1-3421 - - - D E F G G-156 H J K M N - - - - $ 8.20 9 11 13 $18.00 1 L-099 1-3616 - - - - E - G G-156 H J - M N O - - - $11.95 9 11 13 $24.95 2 L-100 1-3422 - - - - E F G G-156 H J K M N O P - - $13.60 9 11 13 $25.95 2 L-110 1-3423 - - - - - - G - H J - M N O P Q R S $22.95 9 11 13 $37.95 5

G-156 has special 5/32˝ keyway

Inserts for 3 Piece CouplingsCoupling Rubber Inserts Urethane InsertsSeries ITEM Shpg. Price ITEM Shpg. Price

L-050 1-3419-X 1/10 $1.80L-070 1-3614-X 1/10 $2.34L-075 1-3420-X 1/10 $3.35 1-3420-UR 1/10 $11.95L-090 1-3615-X 1/10 $3.60 1-3615-UR 1/10 $13.95L-095 1-3421-X 1/10 $3.60 1-3421-UR 1/10 $14.95L-099 1-3616-X 1/10 $5.80 1-3616-UR 1/10 $20.95L-100 1-3422-X 1/10 $6.15 1-3422-UR 1/10 $20.95L-110 1-3423-X ¼ $10.15

Bore Sizes - Choose ITEM number suffix letter based on bore size required. Splined bores have numeric suffix.

Complete Coupler

L-050 Series L-075 thru L-110 Series

Triple Groove Pulleys

Example: ITEM 1-3BK32-A is a3.35˝ diameter pulley with 1˝ bore.

Datum Dia. Finished Bore Sizes OD A Belt B Belt ITEM 1˝ 1⅛˝ 1⅜˝ 1⅝˝ Shpg. Price

3.35˝ 2.60˝ 3.00˝ 1-3BK32 E F – – 4 lbs. $20.30 3.55˝ 2.80˝ 3.20˝ 1-3BK34 E F I L 4 lbs. $21.10 3.75˝ 3.00˝ 3.40˝ 1-3BK36 E F I L 5 lbs. $24.10 3.95˝ 3.20˝ 3.60˝ 1-3BK40 E F I – 5 lbs. $26.70

142 Finished Bore Pulleys www.surpluscenter.com8Finished Bore Single, Double & Triple Groove Pulleys

• Brand new cast iron pulleys. For use with type “A” and “B” belts. Fully balanced.• All pulleys furnished with one set screw• Pulleys have keyed bores in sizes greater than ½˝ (½˝ bore pulleys have no keyway).

• Select an ITEM number for pulley from chart according to outside diameter and add suffix letter according to bore size.

Single Groove Pulleys Double Groove Pulleys

Example: ITEM 1-BK24-A is a Example: ITEM 1-2BK25-A is a2.45˝ diameter pulley with ½˝ bore. 2.55˝ diameter pulley with ½˝ bore.

Datum Dia. Finished Bore Sizes Finished Bore Sizes OD A Belt B Belt ITEM ½˝ ⅝˝ ¾˝ ⅞˝ 1˝ 1⅛˝13/16˝1¼˝ 1⅜˝17/16˝ Shpg. Price ITEM ½˝ ⅝˝ ¾˝ ⅞˝ 1˝ 1⅛˝13/16˝1⅜˝17/16˝ Shpg. Price

2.45˝ 1.80˝ 2.20˝ 1-BK24 A B C D – – – – – – 1 lb. $ 5.25 2.55˝ 1.90˝ 2.30˝ 1-BK25 A B C D – – – – – – 1 lb. $ 6.25 1-2BK25 A B C D – – – – – 2 lbs. $10.00 2.65˝ 2.00˝ 2.40˝ 1-BK26 A B C D – – – – – – 1 lb. $ 6.75 2.75˝ 2.10˝ 2.50˝ 1-BK27 A B C D – F – – – – 1 lb. $ 7.25 1-2BK27 A B C D E – – – – 2 lbs. $11.95 2.95˝ 2.20˝ 2.60˝ 1-BK28 A B C D E F – – – – 2 lbs. $ 7.75 1-2BK28 A B C D E F – – – 3 lbs. $12.45 3.15˝ 2.40˝ 2.80˝ 1-BK30 A B C D E F – – – – 2 lbs. $ 7.90 1-2BK30 A B C D E F – – – 4 lbs. $12.95 3.35˝ 2.60˝ 3.00˝ 1-BK32 A B C D E – – – – – 2 lbs. $ 8.40 1-2BK32 – B – D E F – – – 4 lbs. $13.40 3.55˝ 2.80˝ 3.20˝ 1-BK34 A B C D E F – – – – 2 lbs. $ 9.40 1-2BK34 – B C D E F – – – 4 lbs. $14.95 3.75˝ 3.00˝ 3.40˝ 1-BK36 A B C D E F – – – – 2 lbs. $10.40 1-2BK36 – – C D E F – I – 5 lbs. $16.45 3.95˝ 3.20˝ 3.60˝ 1-BK40 A B C D E F – – – – 2 lbs. $11.50 1-2BK40 – B C D E F – – – 5 lbs. $18.00 4.25˝ 3.50˝ 3.90˝ 1-BK45 A B C D E F – – – – 3 lbs. $12.50 1-2BK45 – – – – E F – I – 5 lbs. $19.65 4.45˝ 3.70˝ 4.10˝ 1-BK47 A B C D E F – – – – 3 lbs. $12.95 1-2BK47 – – – D E F – – – 5 lbs. $19.70 4.75˝ 4.00˝ 4.40˝ 1-BK50 A B C D E F – – – – 3 lbs. $13.15 1-2BK50 – – C – E F – I – 5 lbs. $20.95 4.95˝ 4.20˝ 4.60˝ 1-BK52 A B C D E F – – – – 3 lbs. $13.40 1-2BK52 – – – D E F – I – 6 lbs. $20.95 5.25˝ 4.50˝ 4.90˝ 1-BK55 A B C D E F G – – – 4 lbs. $14.25 1-2BK55 – – – – – F – I – 6 lbs. $21.95 5.45˝ 4.70˝ 5.10˝ 1-BK57 – B C D E F – – – – 4 lbs. $14.30 1-2BK57 – – – – E F – I – 6 lbs. $22.95 5.75˝ 5.00˝ 5.40˝ 1-BK60 A B C D E F G – – – 4 lbs. $15.35 1-2BK60 – – C D E F – I – 6 lbs. $23.95 5.95˝ 5.20˝ 5.60˝ 1-BK62 A B C D E F G – – – 4 lbs. $16.25 1-2BK62 – – – – E F – I – 6 lbs. $24.95 6.25˝ 5.50˝ 5.90˝ 1-BK65 – B C – E F – – – – 4 lbs. $17.35 1-2BK65 – – – – E F – I – 6 lbs. $26.95 6.45˝ 5.70˝ 6.10˝ 1-BK67 – B C – E F – – – – 4 lbs. $18.30 1-2BK67 – – – – E F – I – 6 lbs. $28.95 6.75˝ 6.00˝ 6.40˝ 1-BK70 – B C – E F G – – J 5 lbs. $18.55 1-2BK70 – – C – E F G I J 8 lbs. $28.95 6.95˝ 6.20˝ 6.60˝ 1-BK72 – – C – E F – – I J 5 lbs. $19.50 7.25˝ 6.50˝ 6.90˝ 1-BK75 – – C – E F – – – J 5 lbs. $20.95 7.45˝ 6.70˝ 7.10˝ 1-BK77 – – C – E F – – I J 5 lbs. $21.95 7.75˝ 7.00˝ 7.40˝ 1-BK80 – B C D E F G H I J 6 lbs. $22.95 1-2BK80 – – C – E F G I J 9 lbs. $35.95 8.25˝ 7.50˝ 7.90˝ 1-BK85 – – C – E F G – I J 6 lbs. $24.95 8.75˝ 8.00˝ 8.40˝ 1-BK90 – – C D E F G – I J 6 lbs. $25.95 1-2BK90 – – C – E F G I J 10 lbs. $30.95 9.25˝ 8.50˝ 8.90˝ 1-BK95 – – C – E F – – I J 7 lbs. $27.95 9.75˝ 9.00˝ 9.40˝ 1-BK100 – – C D E F G H I J 7 lbs. $30.95 1-2BK100 – – C – E – G I J 11 lbs. $35.95 10.25˝ 9.50˝ 9.90˝ 1-BK105 – – – – E – – – I J 7 lbs. $32.95 10.75˝ 10.00˝ 10.40˝ 1-BK110 – – C – E F G – I J 8 lbs. $35.95 1-2BK110 – – – – E – G – J 12 lbs. $40.95 11.25˝ 10.50˝ 10.90˝ 1-BK115 – – – – E – – – I J 8 lbs. $38.95 11.75˝ 11.00˝ 11.40˝ 1-BK120 – – C – E – G – I J 9 lbs. $30.95 1-2BK120 – – – – E – G – J 14 lbs. $46.95 12.75˝ 12.00˝ 12.40˝ 1-BK130 – – C – E F G – – J 10 lbs. $33.95 1-2BK130 – – – – E – G – J 17 lbs. $52.95 13.75˝ 13.00˝ 13.40˝ 1-BK140 – – C – E – G – – J 12 lbs. $37.95 1-2BK140 – – – – E – G – J 19 lbs. $58.95 15.75˝ 15.00˝ 15.40˝ 1-BK160 – – – – E F G H – J 14 lbs. $41.95 1-2BK160 – – – – E – G – J 20 lbs. $64.95 18.75˝ 18.00˝ 18.40˝ 1-BK190 – – – – E – G H – J 16 lbs. $44.95 1-2BK190 – – – – – – G – J 25 lbs. $73.95

Std. Keyseat Dimensions

Shaft Diam. Width Depth ½˝ No keyseat ⅝˝ - ⅞˝ 3/16˝ 3/32˝ 15/16˝ - 1¼˝ ¼˝ ⅛˝ 15/16˝ - 1⅜˝ 5/16˝ 5/32˝ 17/16˝ ⅜˝ 3/16˝

800-488-3407 Bushing Bore Pulleys 143&

H Series KeyedBushings

Your Choice

$5.80• Brand new, type H split taper bushings.For use with all of the pulleys at left.Shpg. 2 lbs.

Metric Standard ITEM Bore ITEM Bore 1-2913-37 ⅜˝ 1-2915-10 10 mm 1-2913-43 7/16˝ 1-2915-11 11 mm 1-2913-50 ½˝ 1-2915-12 12 mm 1-2913-56 9/16˝ 1-2915-14 14 mm 1-2913-62 ⅝˝ 1-2915-15 15 mm 1-2913-68 11/16˝ 1-2915-16 16 mm 1-2913-75 ¾˝ 1-2915-18 18 mm 1-2913-81 13/16˝ 1-2915-19 19 mm 1-2913-87 ⅞˝ 1-2915-20 20 mm 1-2913-93 15/16˝ 1-2915-22 22 mm 1-2913-100 1˝ 1-2915-24 24 mm 1-2913-106 11/16˝ 1-2915-25 25 mm 1-2913-112 1⅛˝ 1-2915-28 28 mm 1-2913-118 13/16˝ 1-2915-30 30 mm 1-2913-125 1¼˝ 1-2915-32 32 mm 1-2913-131 15/16˝ 1-2915-35 35 mm 1-2913-137 1⅜˝ 1-2915-36 36 mm 1-2913-143 17/16˝ 1-2915-38 38 mm 1-2913-150 1½˝

Single Groove Pulleys Double Groove Pulleys Datum Dia. Hub Hub O.D. A Belt B Belt ITEM Width Shpg. Price ITEM Width Shpg. Price 3.15 2.40 2.80 1-BKH30 115/16˝ 2 lbs. $7.60 – 3.35 2.60 3.00 1-BKH32 115/16˝ 2 lbs. $8.15 1-2BKH32 213/16˝ 3 lbs. $13.40 3.55 2.80 3.20 1-BKH34 115/16˝ 2 lbs. $9.20 1-2BKH34 213/16˝ 3 lbs. $14.95 3.75 3.00 3.40 1-BKH36 1½˝ 2 lbs. $10.25 1-2BKH36 2⅜˝ 3 lbs. $16.45 3.95 3.20 3.60 1-BKH40 1½˝ 2 lbs. $11.20 1-2BKH40 2⅜˝ 3 lbs. $18.00 4.25 3.50 3.90 1-BKH45 1½˝ 2 lbs. $11.95 1-2BKH45 2⅜˝ 4 lbs. $19.70 4.45 3.70 4.10 1-BKH47 1½˝ 3 lbs. $12.20 1-2BKH47 1¾˝ 4 lbs. $19.75 4.75 4.00 4.40 1-BKH50 1½˝ 3 lbs. $13.15 1-2BKH50 1¾˝ 4 lbs. $20.95 4.95 4.20 4.60 1-BKH52 1½˝ 3 lbs. $13.25 1-2BKH52 1¾˝ 5 lbs. $20.95 5.25 4.50 4.90 1-BKH55 1½˝ 3 lbs. $14.20 1-2BKH55 1¾˝ 5 lbs. $21.95 5.45 4.70 5.10 1-BKH57 1½˝ 3 lbs. $14.30 1-2BKH57 1¾˝ 5 lbs. $22.95 5.75 5.00 5.40 1-BKH60 1½˝ 3 lbs. $15.55 1-2BKH60 1¾˝ 5 lbs. $23.95 5.95 5.20 5.60 1-BKH62 1½˝ 4 lbs. $16.30 1-2BKH62 1¾˝ 6 lbs. $24.95 6.25 5.50 5.90 1-BKH65 1½˝ 4 lbs. $17.35 1-2BKH65 1¾˝ 6 lbs. $26.95 6.45 5.70 6.10 1-BKH67 1½˝ 4 lbs. $18.30 1-2BKH67 1¾˝ 6 lbs. $28.95 6.75 6.00 6.40 1-BKH70 19/16˝ 4 lbs. $18.50 1-2BKH70 1¾˝ 6 lbs. $28.95 6.95 6.20 6.60 1-BKH72 19/16˝ 4 lbs. $19.55 – 7.25 6.50 6.90 1-BKH75 19/16˝ 4 lbs. $20.95 – 7.45 6.70 7.10 1-BKH77 19/16˝ 5 lbs. $21.95 – 7.75 7.00 7.40 1-BKH80 19/16˝ 5 lbs. $22.95 1-2BKH80 1¾˝ 8 lbs. $35.95 8.25 7.50 7.90 1-BKH85 19/16˝ 5 lbs. $24.95 – 8.75 8.00 8.40 1-BKH90 19/16˝ 6 lbs. $25.95 1-2BKH90 1¾˝ 9 lbs. $30.95 9.25 8.50 8.90 1-BKH95 19/16˝ 6 lbs. $27.95 – 9.75 9.00 9.40 1-BKH100 19/16˝ 6 lbs. $29.95 1-2BKH100 1¾˝ 10 lbs. $35.95 10.25 9.50 9.90 1-BKH105 19/16˝ 6 lbs. $32.95 – 10.75 10.00 10.40 1-BKH110 19/16˝ 7 lbs. $35.95 1-2BKH110 1¾˝ 11 lbs. $41.00 11.25 10.50 10.90 1-BKH115 19/16˝ 8 lbs. $38.95 – 11.75 11.00 11.40 1-BKH120 19/16˝ 8 lbs. $30.95 1-2BKH120 1¾˝ 13 lbs. $46.95 12.75 12.00 12.40 1-BKH130 19/16˝ 8 lbs. $34.95 1-2BKH130 1¾˝ 15 lbs. $52.95 13.75 13.00 13.40 1-BKH140 19/16˝ 10 lbs. $37.95 1-2BKH140 1¾˝ 16 lbs. $58.95 14.75 14.00 14.40 1-BKH150 19/16˝ 11 lbs. $40.95 – 15.75 15.00 15.40 1-BKH160 19/16˝ 12 lbs. $41.95 1-2BKH160 1¾˝ 19 lbs. $64.95 18.75 18.00 18.40 1-BKH190 19/16˝ 15 lbs. $47.95 1-2BKH190 1¾˝ 23 lbs. $73.95

Datum Dia. Hub O.D. A Belt B Belt ITEM Width Shpg. Price 4.25 3.50 3.90 1-3BKH45 2½˝ 5 lbs. $28.45 4.45 3.70 4.10 1-3BKH47 2½˝ 5 lbs. $30.40 4.75 4.00 4.40 1-3BKH50 2½˝ 5 lbs. $30.80 5.45 4.70 5.10 1-3BKH57 2½˝ 6 lbs. $31.50 5.95 5.20 5.60 1-3BKH62 2½˝ 7 lbs. $38.60 8.75 8.00 8.40 1-3BKH90 2½˝ 11 lbs. $54.00 9.75 9.00 9.40 1-3BKH100 2½˝ 12 lbs. $63.75 10.75 10.00 10.40 1-3BKH110 2½˝ 13 lbs. $77.00 11.75 11.00 11.40 1-3BKH120 2½˝ 15 lbs. $85.00

Idler Pulleys

Flat Belt Pressed V-Belt Pressed V-Belt Solid

• Use to provide tension on belts. All 3styles have extended inner race precisionball bearing hubs.

Flat Belt Pressed Steel StyleSPECIFICATIONS • Hub width 11/16˝• Outside dia. 3¼˝ • Groove dia. 2¾˝• Groove width 13/16˝ • Shpg. 1 lb.

ITEM 1-3743-A ½˝ bore hub $15.30ITEM 1-3743-B ⅝˝ bore hub $15.30SPECIFICATIONS • Hub width 11/16˝• Outside dia. 4½˝ • Groove dia. 4˝• Groove width 13/16˝ • Shpg. 1 lb.

ITEM 1-3744-A ½˝ bore hub $16.55ITEM 1-3744-B ⅝˝ bore hub $16.55V-Belt Pressed Steel StyleSPECIFICATIONS• Outside dia. 5˝ • Hub width 11/16˝• Belt size A (½˝) or B (⅝˝) • Shpg. 2 lbs.

ITEM 1-3745-A ½˝ bore hub $16.55ITEM 1-3745-B ⅝˝ bore hub $16.55V-Belt Solid Steel StyleSPECIFICATIONS• Outside dia. 4˝ • Hub bore ½˝ • Shpg. 3 lbs.

ITEM 1-3746-A $23.65• For A (½˝) belts, 11/16˝ hub width

ITEM 1-3746-B $26.90• For B (⅝˝) belts, 13/16˝ hub width

Triple Groove Pulleys

H Bushed Bore Single & Double Groove Pulleys

• Brand new, cast iron, FHP pulleys. Use with a H-type split taper bushing (sold separatelybelow). For use with Type A or Type B belts.

Choose appropriate bore H bushing (at right) for pulleys.

144 ½˝ V-Belts www.surpluscenter.com8

AX (½˝) Notched V-Belts• Brand new, BESTORQ notched, classic profile V-belts. Highly oil and heat resistant. Cut edge, molded notch construction. Notchesgive belt superior flexibility around pulleys and longer working life compared to standard V-belts. Outside length is the outer circumfer-ence of the belt. These belts exceed RMA published ratings.

13-A14 A14 or 4L160 16 ½ lb. $2.50 13-A15 A15 or 4L170 17 ½ lb. $2.60 13-A16 A16 or 4L180 18 ½ lb. $2.70 13-A17 A17 or 4L190 19 ½ lb. $2.80 13-A18 A18 or 4L200 20 ½ lb. $2.90 13-A19 A19 or 4L210 21 ½ lb. $3.00 13-A20 A20 or 4L220 22 ½ lb. $3.10 13-A21 A21 or 4L230 23 ½ lb. $3.20 13-A22 A22 or 4L240 24 ½ lb. $3.30 13-A23 A23 or 4L250 25 ½ lb. $3.40 13-A24 A24 or 4L260 26 ½ lb. $2.55 13-A25 A25 or 4L270 27 ½ lb. $2.60 13-A26 A26 or 4L280 28 ½ lb. $2.70 13-A27 A27 or 4L290 29 ½ lb. $2.80 13-A28 A28 or 4L300 30 ½ lb. $2.85 13-A29 A29 or 4L310 31 ½ lb. $2.95 13-A30 A30 or 4L320 32 ½ lb. $3.05 13-A31 A31 or 4L330 33 ½ lb. $3.10 13-A32 A32 or 4L340 34 ½ lb. $3.20 13-A33 A33 or 4L350 35 ½ lb. $3.30 13-A34 A34 or 4L360 36 ½ lb. $3.40 13-A35 A35 or 4L370 37 ½ lb. $3.50 13-A36 A36 or 4L380 38 ½ lb. $3.55 13-A37 A37 or 4L390 39 ½ lb. $3.65 13-A38 A38 or 4L400 40 ½ lb. $3.70 13-A39 A39 or 4L410 41 ½ lb. $3.80 13-A40 A40 or 4L420 42 ½ lb. $3.90 13-A41 A41 or 4L430 43 ½ lb. $4.00 13-A42 A42 or 4L440 44 ½ lb. $4.05 13-A43 A43 or 4L450 45 ½ lb. $4.15 13-A44 A44 or 4L460 46 ½ lb. $4.25 13-A45 A45 or 4L470 47 ¾ lb. $4.30

13-A46 A46 or 4L480 48 ¾ lb. $4.40 13-A47 A47 or 4L490 49 ¾ lb. $4.50 13-A48 A48 or 4L500 50 ¾ lb. $4.60 13-A49 A49 or 4L510 51 ¾ lb. $4.65 13-A50 A50 or 4L520 52 ¾ lb. $4.75 13-A51 A51 or 4L530 53 ¾ lb. $4.85 13-A52 A52 or 4L540 54 ¾ lb. $4.95 13-A53 A53 or 4L550 55 ¾ lb. $5.00 13-A54 A54 or 4L560 56 ¾ lb. $5.10 13-A55 A55 or 4L570 57 ¾ lb. $5.20 13-A56 A56 or 4L580 58 ¾ lb. $5.30 13-A57 A57 or 4L590 59 ¾ lb. $5.35 13-A58 A58 or 4L600 60 ¾ lb. $5.45 13-A59 A59 or 4L610 61 ¾ lb. $5.55 13-A60 A60 or 4L620 62 ¾ lb. $5.65 13-A61 A61 or 4L630 63 ¾ lb. $5.70 13-A62 A62 or 4L640 64 ¾ lb. $5.80 13-A63 A63 or 4L650 65 ¾ lb. $5.90 13-A64 A64 or 4L660 66 ¾ lb. $6.00 13-A65 A65 or 4L670 67 ¾ lb. $6.05 13-A66 A66 or 4L680 68 ¾ lb. $6.15 13-A67 A67 or 4L690 69 ¾ lb. $6.25 13-A68 A68 or 4L700 70 ¾ lb. $6.35 13-A69 A69 or 4L710 71 ¾ lb. $6.40 13-A70 A70 or 4L720 72 ¾ lb. $6.50 13-A71 A71 or 4L730 73 ¾ lb. $6.60 13-A72 A72 or 4L740 74 ¾ lb. $6.65 13-A73 A73 or 4L750 75 ¾ lb. $6.75 13-A74 A74 or 4L760 76 ¾ lb. $6.85 13-A75 A75 or 4L770 77 ¾ lb. $6.95 13-A76 A76 or 4L780 78 ¾ lb. $7.00 13-A77 A77 or 4L790 79 ¾ lb. $7.10

13-A78 A78 or 4L800 80 ¾ lb. $7.20 13-A79 A79 or 4L810 81 ¾ lb. $7.30 13-A80 A80 or 4L820 82 ¾ lb. $7.35 13-A81 A81 or 4L830 83 ¾ lb. $7.45 13-A82 A82 or 4L840 84 ¾ lb. $7.55 13-A83 A83 or 4L850 85 ¾ lb. $7.65 13-A84 A84 or 4L860 86 ¾ lb. $7.70 13-A85 A85 or 4L870 87 ¾ lb. $7.80 13-A86 A86 or 4L880 88 ¾ lb. $7.90 13-A87 A87 or 4L890 89 ¾ lb. $8.00 13-A88 A88 or 4L900 90 ¾ lb. $8.05 13-A89 A89 or 4L910 91 ¾ lb. $8.15 13-A90 A90 or 4L920 92 ¾ lb. $8.25 13-A91 A91 or 4L930 93 1 lb. $8.35 13-A92 A92 or 4L940 94 1 lb. $8.40 13-A93 A93 or 4L950 95 1 lb. $8.50 13-A94 A94 or 4L960 96 1 lb. $8.60 13-A95 A95 or 4L970 97 1 lb. $8.70 13-A96 A96 or 4L980 98 1 lb. $8.75 13-A97 A97 or 4L990 99 1 lb. $8.85 13-A98 A98 or 4L1000 100 1 lb. $8.95 13-A99 A99 101 1 lb. $9.05 13-A100 A100 102 1 lb. $9.10 13-A103 A103 105 1 lb. $9.40 13-A105 A105 107 1 lb. $9.55 13-A110 A110 112 1 lb. $10.00 13-A112 A112 114 1 lb. $10.95 13-A116 A116 118 1 lb. $10.95 13-A120 A120 122 1 lb. $10.95 13-A126 A126 128 2 lbs. $11.95 13-A128 A128 130 2 lbs. $11.95 13-A136 A136 138 2 lbs. $12.95

13-AX20 AX20 22 ½ lb. $4.50 13-AX21 AX21 23 ½ lb. $4.60 13-AX22 AX22 24 ½ lb. $4.70 13-AX23 AX23 25 ½ lb. $4.80 13-AX24 AX24 26 ½ lb. $4.95 13-AX25 AX25 27 ½ lb. $5.05 13-AX26 AX26 28 ½ lb. $5.15 13-AX27 AX27 29 ½ lb. $5.25 13-AX28 AX28 30 ½ lb. $5.35 13-AX29 AX29 31 ½ lb. $5.50 13-AX30 AX30 32 ½ lb. $5.60 13-AX31 AX31 33 ½ lb. $5.70 13-AX32 AX32 34 ½ lb. $5.80 13-AX33 AX33 35 ½ lb. $5.95 13-AX34 AX34 36 ½ lb. $6.05 13-AX35 AX35 37 ½ lb. $6.15 13-AX36 AX36 38 ½ lb. $6.25 13-AX37 AX37 39 ½ lb. $6.40 13-AX38 AX38 40 ½ lb. $6.50 13-AX39 AX39 41 ½ lb. $6.60 13-AX40 AX40 42 ½ lb. $6.70 13-AX41 AX41 43 ½ lb. $6.85 13-AX42 AX42 44 ½ lb. $6.95 13-AX43 AX43 45 ½ lb. $7.05

13-AX44 AX44 46 ½ lb. $7.15 13-AX45 AX45 47 ¾ lb. $7.30 13-AX46 AX46 48 ¾ lb. $7.40 13-AX47 AX47 49 ¾ lb. $7.50 13-AX48 AX48 50 ¾ lb. $7.60 13-AX49 AX49 51 ¾ lb. $7.75 13-AX50 AX50 52 ¾ lb. $7.85 13-AX51 AX51 53 ¾ lb. $7.95 13-AX52 AX52 54 ¾ lb. $8.10 13-AX53 AX53 55 ¾ lb. $8.20 13-AX54 AX54 56 ¾ lb. $8.30 13-AX55 AX55 57 ¾ lb. $8.40 13-AX56 AX56 58 ¾ lb. $8.55 13-AX57 AX57 59 ¾ lb. $8.65 13-AX58 AX58 60 ¾ lb. $8.75 13-AX59 AX59 61 ¾ lb. $8.85 13-AX60 AX60 62 ¾ lb. $9.00 13-AX61 AX61 63 ¾ lb. $9.10 13-AX62 AX62 64 ¾ lb. $9.20 13-AX63 AX63 65 ¾ lb. $9.35 13-AX64 AX64 66 ¾ lb. $9.45 13-AX65 AX65 67 ¾ lb. $9.55 13-AX66 AX66 68 ¾ lb. $9.65 13-AX67 AX67 69 ¾ lb. $9.80

13-AX68 AX68 70 ¾ lb. $9.90 13-AX69 AX69 71 ¾ lb. $10.00 13-AX70 AX70 72 ¾ lb. $10.95 13-AX71 AX71 73 ¾ lb. $10.95 13-AX72 AX72 74 ¾ lb. $10.95 13-AX73 AX73 75 ¾ lb. $10.95 13-AX74 AX74 76 ¾ lb. $10.95 13-AX75 AX75 77 ¾ lb. $10.95 13-AX76 AX76 78 ¾ lb. $10.95 13-AX77 AX77 79 ¾ lb. $10.95 13-AX78 AX78 80 ¾ lb. $11.95 13-AX79 AX79 81 ¾ lb. $11.95 13-AX80 AX80 82 ¾ lb. $11.95 13-AX81 AX81 83 ¾ lb. $11.95 13-AX82 AX82 84 ¾ lb. $11.95 13-AX83 AX83 85 ¾ lb. $11.95 13-AX84 AX84 86 ¾ lb. $11.95 13-AX85 AX85 87 ¾ lb. $11.95 13-AX86 AX86 88 ¾ lb. $11.95 13-AX87 AX87 89 ¾ lb. $12.95 13-AX88 AX88 90 ¾ lb. $12.95 13-AX89 AX89 91 ¾ lb. $12.95 13-AX90 AX90 92 ¾ lb. $12.95

OutsideITEM Model Lgth. Shpg. Price






A (½˝) V-Belts• Brand new, BESTORQ classic profile V-belts. Highly oil and heat resistant. Wrapped construction.Outside length is the outer circumference of the belt. These belts exceed RMA published ratings.

800-488-3407 ⅝˝ V-Belts 145&

BX (⅝˝) Notched V-Belts• Brand new, BESTORQ notched, classic profile V-belts. Highly oil and heat resistant. Cut edge, molded notch construction. Notchesgive belt superior flexibility around pulleys and longer working life compared to standard V-belts. Outside length is the outer circumfer-ence of the belt. These belts exceed RMA published ratings.

13-B20 B20 or 5L230 23 ½ lb. $3.00 13-B21 B21 or 5L240 24 ½ lb. $3.10 13-B22 B22 or 5L250 25 ½ lb. $3.20 13-B23 B23 or 5L260 26 ½ lb. $3.35 13-B24 B24 or 5L270 27 ½ lb. $3.45 13-B25 B25 or 5L280 28 ½ lb. $3.55 13-B26 B26 or 5L290 29 ¾ lb. $3.65 13-B27 B27 or 5L300 30 ¾ lb. $3.75 13-B28 B28 or 5L310 31 ¾ lb. $3.90 13-B29 B29 or 5L320 32 ¾ lb. $4.00 13-B30 B30 or 5L330 33 ¾ lb. $4.10 13-B31 B31 or 5L340 34 ¾ lb. $4.20 13-B32 B32 or 5L350 35 ¾ lb. $4.35 13-B33 B33 or 5L360 36 ¾ lb. $4.45 13-B34 B34 or 5L370 37 ¾ lb. $4.55 13-B35 B35 or 5L380 38 ¾ lb. $4.65 13-B36 B36 or 5L390 39 ¾ lb. $4.80 13-B37 B37 or 5L400 40 ¾ lb. $4.90 13-B38 B38 or 5L410 41 ¾ lb. $5.00 13-B39 B39 or 5L420 42 ¾ lb. $5.10 13-B40 B40 or 5L430 43 ¾ lb. $5.25 13-B41 B41 or 5L440 44 ¾ lb. $5.35 13-B42 B42 or 5L450 45 ¾ lb. $5.45 13-B43 B43 or 5L460 46 ¾ lb. $5.60 13-B44 B44 or 5L470 47 ¾ lb. $5.70 13-B45 B45 or 5L480 48 ¾ lb. $5.80 13-B46 B46 or 5L490 49 ¾ lb. $5.90 13-B47 B47 or 5L500 50 ¾ lb. $6.05 13-B48 B48 or 5L510 51 ¾ lb. $6.15 13-B49 B49 or 5L520 52 ¾ lb. $6.25 13-B50 B50 or 5L530 53 ¾ lb. $6.40 13-B51 B51 or 5L540 54 ¾ lb. $6.50 13-B52 B52 or 5L550 55 ¾ lb. $6.60 13-B53 B53 or 5L560 56 ¾ lb. $6.70

13-B54 B54 or 5L570 57 ¾ lb. $6.85 13-B55 B55 or 5L580 58 1 lb. $6.95 13-B56 B56 or 5L590 59 1 lb. $7.05 13-B57 B57 or 5L600 60 1 lb. $7.20 13-B58 B58 or 5L610 61 1 lb. $7.30 13-B59 B59 or 5L620 62 1 lb. $7.40 13-B60 B60 or 5L630 63 1 lb. $7.50 13-B61 B61 or 5L640 64 1 lb. $7.65 13-B62 B62 or 5L650 65 1 lb. $7.75 13-B63 B63 or 5L660 66 1 lb. $7.85 13-B64 B64 or 5L670 67 1 lb. $8.00 13-B65 B65 or 5L680 68 1 lb. $8.10 13-B66 B66 or 5L690 69 1 lb. $8.20 13-B67 B67 or 5L700 70 1 lb. $8.35 13-B68 B68 or 5L710 71 1 lb. $8.45 13-B69 B69 or 5L720 72 1 lb. $8.55 13-B70 B70 or 5L730 73 1 lb. $8.65 13-B71 B71 or 5L740 74 1 lb. $8.80 13-B72 B72 or 5L750 75 1 lb. $8.90 13-B73 B73 or 5L760 76 1 lb. $9.00 13-B74 B74 or 5L770 77 1 lb. $9.15 13-B75 B75 or 5L780 78 1 lb. $9.25 13-B76 B76 or 5L790 79 1 lb. $9.35 13-B77 B77 or 5L800 80 1 lb. $9.50 13-B78 B78 or 5L810 81 1 lb. $9.60 13-B79 B79 or 5L820 82 1 lb. $9.70 13-B80 B80 or 5L830 83 1¼ lb. $9.80 13-B81 B81 or 5L840 84 1¼ lb. $9.95 13-B82 B82 or 5L850 85 1¼ lb. $10.95 13-B83 B83 or 5L860 86 1¼ lb. $10.95 13-B84 B84 or 5L870 87 1¼ lb. $10.95 13-B85 B85 or 5L880 88 1¼ lb. $10.95 13-B86 B86 or 5L890 89 1¼ lb. $10.95 13-B87 B87 or 5L900 90 1¼ lb. $10.95

13-B88 B88 or 5L910 91 1¼ lb. $10.95 13-B89 B89 or 5L920 92 1¼ lb. $10.95 13-B90 B90 or 5L930 93 1¼ lb. $10.95 13-B91 B91 or 5L940 94 1¼ lb. $11.95 13-B92 B92 or 5L950 95 1¼ lb. $11.95 13-B93 B93 or 5L960 96 1½ lb. $11.95 13-B94 B94 or 5L970 97 1½ lb. $11.95 13-B95 B95 or 5L980 98 1½ lb. $11.95 13-B96 B96 or 5L990 99 1½ lb. $11.95 13-B97 B97 or 5L1000 100 1½ lb. $11.95 13-B99 B99 102 1½ lb. $12.00 13-B100 B100 103 1½ lb. $12.95 13-B101 B101 104 1½ lb. $12.95 13-B102 B102 105 1½ lb. $12.95 13-B103 B103 106 1½ lb. $12.95 13-B105 B105 108 1½ lb. $12.95 13-B106 B106 109 1½ lb. $12.95 13-B108 B108 111 1½ lb. $13.95 13-B111 B111 114 2 lbs. $13.95 13-B112 B112 115 2 lbs. $13.95 13-B113 B113 116 2 lbs. $13.95 13-B115 B115 118 2 lbs. $13.95 13-B116 B116 119 2 lbs. $13.95 13-B117 B117 120 2 lbs. $14.95 13-B118 B118 121 2 lbs. $14.95 13-B120 B120 123 2 lbs. $14.95 13-B122 B122 125 2 lbs. $14.95 13-B123 B123 126 2 lbs. $14.95 13-B124 B124 127 2 lbs. $14.95 13-B128 B128 131 2 lbs. $15.95 13-B133 B133 136 2 lbs. $15.95 13-B136 B136 139 2 lbs. $16.95 13-B140 B140 143 2 lbs. $16.95 13-B144 B144 147 2 lbs. $17.95

B (⅝˝) V-Belts• Brand new, BESTORQ classic profile V-belts. Highly oil and heat resistant. Wrapped construction.Outside length is the outer circumference of the belt. These belts exceed RMA published ratings.







13-BX30 BX30 33 ¾ lb. $8.70 13-BX31 BX31 34 ¾ lb. $8.85 13-BX32 BX32 35 ¾ lb. $9.05 13-BX33 BX33 36 ¾ lb. $9.20 13-BX34 BX34 37 ¾ lb. $9.35 13-BX35 BX35 38 ¾ lb. $9.50 13-BX36 BX36 39 ¾ lb. $9.70 13-BX37 BX37 40 ¾ lb. $9.85 13-BX38 BX38 41 ¾ lb. $10.00 13-BX39 BX39 42 ¾ lb. $10.95 13-BX40 BX40 43 ¾ lb. $10.95 13-BX41 BX41 44 ¾ lb. $10.95 13-BX42 BX42 45 ¾ lb. $10.95 13-BX43 BX43 46 ¾ lb. $10.95 13-BX44 BX44 47 ¾ lb. $11.00 13-BX45 BX45 48 ¾ lb. $11.95 13-BX46 BX46 49 ¾ lb. $11.95 13-BX47 BX47 50 ¾ lb. $11.95 13-BX48 BX48 51 ¾ lb. $11.95 13-BX49 BX49 52 ¾ lb. $11.95 13-BX50 BX50 53 ¾ lb. $11.95 13-BX51 BX51 54 ¾ lb. $12.95 13-BX52 BX52 55 ¾ lb. $12.95 13-BX53 BX53 56 ¾ lb. $12.95

13-BX54 BX54 57 1 lb. $12.95 13-BX55 BX55 58 1 lb. $12.95 13-BX56 BX56 59 1 lb. $12.95 13-BX57 BX57 60 1 lb. $13.95 13-BX58 BX58 61 1 lb. $13.95 13-BX59 BX59 62 1 lb. $13.95 13-BX60 BX60 63 1 lb. $13.95 13-BX61 BX61 64 1 lb. $13.95 13-BX62 BX62 65 1 lb. $13.95 13-BX63 BX63 66 1 lb. $14.95 13-BX64 BX64 67 1 lb. $14.95 13-BX65 BX65 68 1 lb. $14.95 13-BX66 BX66 69 1 lb. $14.66 13-BX67 BX67 70 1 lb. $14.95 13-BX68 BX68 71 1 lb. $14.95 13-BX69 BX69 72 1 lb. $15.95 13-BX70 BX70 73 1 lb. $15.95 13-BX71 BX71 74 1 lb. $15.95 13-BX72 BX72 75 1 lb. $15.95 13-BX73 BX73 76 1 lb. $15.95 13-BX74 BX74 77 1 lb. $15.95 13-BX75 BX75 78 1 lb. $16.95 13-BX76 BX76 79 1 lb. $16.95 13-BX77 BX77 80 1 lb. $16.95

13-BX78 BX78 81 1 lb. $16.95 13-BX79 BX79 82 1¼ lb. $16.95 13-BX80 BX80 83 1¼ lb. $16.95 13-BX81 BX81 84 1¼ lb. $17.95 13-BX82 BX82 85 1¼ lb. $17.95 13-BX83 BX83 86 1¼ lb. $17.95 13-BX84 BX84 87 1¼ lb. $17.95 13-BX85 BX85 88 1¼ lb. $17.95 13-BX86 BX86 89 1¼ lb. $17.95 13-BX87 BX87 90 1¼ lb. $18.95 13-BX88 BX88 91 1¼ lb. $18.95 13-BX89 BX89 92 1¼ lb. $18.95 13-BX90 BX90 93 1¼ lb. $18.95 13-BX94 BX94 97 1½ lb. $19.95 13-BX95 BX95 98 1½ lb. $19.95 13-BX97 BX97 100 1½ lb. $19.95 13-BX105 BX105 108 1½ lb. $21.00 13-BX112 BX112 115 2 lbs. $22.95 13-BX115 BX115 118 2 lbs. $22.95 13-BX116 BX116 119 2 lbs. $22.95 13-BX120 BX120 123 2 lbs. $23.95 13-BX124 BX124 127 2 lbs. $24.95 13-BX128 BX128 131 2 lbs. $24.95

Utility ATV RearDifferential

ITEM 13-1506$229.99• New, Comer Model 9.485.014.0 2 speedrear differential with reverse for utility andATV off-road vehicles for use in four-wheeldrive applications. Splined 4wd and dualfemale spline output shafts. Max 30 MPH.SPECIFICATIONS• Gear ratios: Low 16:1, High 13:1• Input shaft ⅞˝ dia. x 3¼˝ w/keyway• Output dual 22T female spline sockets• Output shaft 4WD 1˝ x 15T with crosshole• Mounting points4 holes around input shaft3 holes on main body7 holes on one side, 8 on other around sockets

• Size 16½˝ x 15˝ x 10½˝• Shpg. 80 lbs.

ZTR Left/Right TransaxleAssembly

ITEM 13-1489 $599.99• New, HYDRO-GEAR ZT-2200 EZT SeriesModels ZC-DHBB-4M7C-3FPA and ZC-AHBB-4M7B-2FPA zero-turn style hydro-static transaxles. Includes a left and righttransaxle for building ZTR vehicles or foruse as replacement on equipment. Inte-grated 10cc variable displacement axialpump and a 10cc fixed displacement drivemotor. Features include a die cast alu-minum housing, belt-drive input pulley withfan, single control lever per unit for for-ward/reverse and speed control, disen-gagement lever to allow freewheeling, fourbolt hub for direct mounting of wheel andparking brake.SPECIFICATIONS• Input 3000 RPM max. • Input rotation CW• Overall reduction 19.2:1 • Input 4½˝ dia. pulley• Output speed 0-150 RPM for ½˝ belt• Engine size 18-22 HP • Axle lgth. 4⅛˝ housing• Output torque to face of hubContinuous 115 ft-lbs. • Output 4 bolt wheelIntermittent 150 ft-lbs. hub on 4˝ B.C.

• Max. weight per axle • Mount 6 hole18˝ diam. tire 340 lbs. • Lubrication 20W-50 oil20˝ diam. tire 300 lbs. • Size 14¾˝ x 14¼˝ x 10¼˝

• Max. tire dia. 20˝ • Shpg. 88 lbs.

TransaxleAssemblies

ITEM 13-1508 ITEM 13-1475

• New PEERLESS trans axles. Originally made for riding mowers. External disc brake.This is a tractor style rider transaxle. Input shaft must be in front of the axles.SPECIFICATIONS• CW input rotation • Two four-bolt mounts on axle axis:• Input shaft ⅝˝ dia. Inner mtg. centers 1¾˝ x 13˝• Axle ¾˝ dia. with keyway and snap groove rings Outer mtg. centers 2½˝ x 16¼˝

ITEM Speeds Model Axle length Shpg. Price13-1508 3F/N/R MST-203-568 24˝ 32 lbs. $119.9513-1475 4F/N/R 930-032 30˝ 37 lbs. $136.95

146 Transaxles www.surpluscenter.com8ZTR Transaxle Assemblies

• New, HYDRO-GEAR zero-turn style hy-drostatic transaxle. For building ZTR vehi-cles or for use as replacement onequipment. Integrated 10cc variable dis-placement axial pump and a 10cc fixeddisplacement drive motor. Features in-clude a die cast aluminum housing, belt-drive input pulley with fan, single controllever for forward/reverse and speed con-trol, disengagement lever to allow free-wheeling, four bolt hub for direct mountingof wheel and parking brake.

ZT-2200 EZT SeriesSPECIFICATIONS• Input speed • Gross vehicle weightMax. 3000 RPM up to 900 lbs.Min. 1800 RPM • Input 4½˝ dia. pulley

• Overall reduction 19.2:1 for ½˝ belt• Output speed 0-150 RPM • Output 4 bolt wheel hub• Output speed on 4˝ B.C.MPH Up to 7 MPH • Mount 9 hole

• Output torque • Lubrication 20W-50 motor oilUp to 215 ft-lbs. • Size 14¾˝ x 13½˝ x 8⅞˝

• Input rotation CW • Shpg. 36 lbs.Axle Length 2˝

ITEM 13-1519-L $229.95• Model ZC-DPBB-3DRA-2WPX. Left sidetransaxle.

ITEM 13-1519-R $229.95• Model ZC-APBB-3DRA-3WPX. Rightside transaxle.Axle Length 4˝

ITEM 13-1520-L $229.95• Model ZC-DUBB-3DRA-2PPX. Left sidetransaxle.

ITEM 13-1520-R $229.95• Model ZC-AUBB-3DRA-3PPX. Rightside transaxle.

ZT-2100 EZT SeriesSPECIFICATIONS• Input speed • Gross vehicle weightMax. 3000 RPM up to 800 lbs.Min. 1800 RPM • Input 4½˝ dia. pulley

• Overall reduction 19.2:1 for ½˝ belt• Output speed 0-150 RPM • Output 4 bolt wheel hub• Output speed on 4˝ B.C.MPH Up to 6 MPH • Mount 7 hole

• Output torque • Lubrication 20W-50 motor oilUp to 200 ft-lbs. • Size 14¾˝ x 14¾˝ x 8⅞˝

• Input rotation CW • Shpg. 36 lbs.

ITEM 13-1521-L $229.95• Model ZF-ATBB-3DRA-2WTX. Left sidetransaxle.

ITEM 13-1521-R $229.95• Model ZF-ATBB-3DRA-3WTX. Right sidetransaxle.

VariableDrivenPulley

ITEM 1-3530$89.95• New, Powerbloc by CVtech-IBC. Built forCub Cadet utility vehicles. Part #618-04679. Aluminum construction. Workingdiameter changes with RPM. Rubbercushions at each end of travel as centerhub slides to vary pulley diameter.SPECIFICATIONS• Horsepower 70 • Max dia 9˝• Max RPM 10,000 • Belt size 1⅜˝ width max.• Bore 18 tooth spline • Size 9˝ x 5⅝˝• Bore 20mm smooth • Shpg. 9 lbs.

Variable Speed Transaxle

ITEM 13-1551 $239.95• New Peerless 2000-007 Silent-Trac se-ries. Hydrostatic transaxle for variablespeed equipment. Single control for speedand directional control. Independentlysealed pump and differential aluminumhousings. 4˝ dia. input pulley with coolingfan. Serrated shaft for mounting externalmechanical brake assembly (not included).Shaft for remote lever to disengage finaldrive from hydrostatic unit for hand push.SPECIFICATIONS• Input speed 2550 RPM max.• Max output 120 rpm• Max axle wt. 525 lbs.• Input rotation CW• Input pulley 4½˝ dia. for ⅝˝ belt• Axles ¾˝ diam. x 3¾˝ w/keyway and snap ring groove• Lubrication Hydrostatic Pump Mobil 424• Lubrication final drive EP-90 gear lube• Overall width 27.2˝• Mounting dual 4 bolt mtg. patterns2½˝ x 16¼˝ and 1¾˝ x 13˝

• Housing size 19⅝˝ x 12˝ x 6½˝• Shpg. 44 lbs.

12˝ SteeringWheel

ITEM 1-4020$8.95• New, pebble grain molded black plasticthree spoke steering wheel. Center cap notincluded. Three centering tabs on bottomof center section.SPECIFICATIONS• Diameter 12˝ • Center cap ID 2˝• Bore 0.48˝ dia. serrated • Center hole thru(recessed ½˝) hub 5/16˝ dia.

• Hub depth 2˝ • Dish depth 2¾˝• Hub dia. 17/16˝ • Shpg. 3 lbs.

Control Cable With HandleITEM 1-4730$4.95• New throttle-control cable with controlhandle assembly. Friction in handle as-sembly holds cable position. One handledetent position. Hooked cable end.SPECIFICATIONS• Cable 0.05˝ dia. cable in 0.22˝ O.D. rubber/steel jacket• Travel 1⅛˝• Cable lgth. 32½˝• Mount two ¼˝ holes, 2˝ c/c• Shpg. ½ lb.

800-488-3407 Control Cables & Rollers 147&

FlexibleControlCables• New, 2mm braided wire control cablewith barrel end and ⅜˝ ID eyelet.SPECIFICATIONS FOR ALL• Housing length 40˝ • Cable dia. 2mm• Control end mount 8mm • Working end mount 5/16-18• Mount adjustment 1¼˝ each end• Shpg. 1 lb.

ITEM Overall Lgth. Travel Price1-3913-B 48½˝ 7¼˝ $3.691-3913-C 44½˝ 3½˝ $3.69

Control Cablew/Handle

ITEM 1-2850$3.95• New throttle-control cable with controlhandle assembly. Friction in handle as-sembly holds cable position. Two handledetent positions. Hooked cable end.SPECIFICATIONS • Overall handle size• 0.05˝ diam. cable in 3½˝ x 1⅞˝ x 3½˝0.25˝O.D. rubber/steel jacket • Two bolt mount on handle• 9/16˝ total pull distance assembly on 2˝ ctrs.• 30¾˝ max. cable length • Shpg. ¼ lb.

88˝ ControlCable

ITEM 1-1754 $19.95• Reinforced jacket 9/16˝ diam. ½˝ diam.mounting on ends for spring clip installa-tions. ⅜-24 thread stud on one end, 5/16˝clevis on other end. 88˝ length, 3˝ travel.Shpg. 4 lbs.

Control Cablew/Handle

ITEM 1-2849$4.95• New throttle-control cable with controlhandle assembly. Friction in handle as-sembly holds cable position. Two handledetent positions. Hooked cable end.SPECIFICATIONS • Overall handle size• 0.05˝ diam. cable in 3½˝ x 1⅞˝ x 3½˝0.2˝ O.D. steel jacket • Two bolt mount on handle• 17/16˝ total pull distance assembly on 113/16˝ ctrs.• 49˝ max. cable length • Shpg. ½ lb.

Control Cablewith Handle

ITEM 1-2331$3.95• New. Throttle control cable with controlhandle assembly. Friction in handle as-sembly holds cable position. Handle de-tent at full throttle position. Stop, slow-fast,and choke positions marked.SPECIFICATIONS• 0.055˝ diam. cable in • Handle size 2½˝ x 9/16˝ x 3˝0.190˝ O.D. steel jacket • Two bolt mount on handle

• Total pull 1⅝˝ assembly on 1½˝ centers• Cable lgth. 30˝ max. • Shpg. 1 lb.

75˝ Heavy DutyControlCableITEM 1-2294 $5.99• New, heavy duty control cable with thickprotective jacket.SPECIFICATIONS• 75˝ end-to-end length • 2nd end:• 45/16˝ travel steel clevis for 5/16˝ pin,• ½˝ O.D. sheathing 7/16˝ outside clevis width,• 3/16˝ diam. steel cable 3/16˝ between clevis ears• 1st end: 5/16˝-24 x 1˝ M • Spring retainer each end• Shpg. 4 lbs. mounts in 9/16˝ dia. opening

Control Cablewith SpringITEM 1-2584$4.95• New, control cable with hooked spring onone end, clevis on other end. Rubber-coatedsteel jacket with plastic liner for smooth op-eration. ¼˝-28 x 1¼˝ threaded end with re-movable clevis. Cable lgth. is center ofspring hook to center of clevis pin hole.SPECIFICATIONS• 0.1˝ diam. steel cable in • Clevis end0.3˝ O.D. jacket 15/32˝ outside width

• 3⅜˝ total pull distance ¼˝ inside width• 49½˝ cable length 13/32˝ pin hole• Jacket lgth. 37½˝ • Shpg. 1 lb.

Belt DriveConveyor Rollers

• New, belt drive conveyor rollers with ball bearings in both ends. Metal shafts extend fromboth ends. Belt grooves are ⅜˝ wide. Includes internal spring that keeps roller centered.

Groove Center ITEM Roller Size Shafts Grooves to Roller End Shpg. Price 1-2465-A 1.375˝ x 21½˝ Hex 7/16˝ x ⅝˝ Single 2¼˝ 4 lbs. $3.99 1-2465-B 1.375˝ x 21½˝ Hex 7/16˝ x ⅝˝ Dual 2¼˝ and 3¼˝ 4 lbs. $3.99

Rollers

Plain Knurled

• New. Painted steel construction with ball bearings in both ends. Use for building conveyors,guides, etc. Metal shaft extends from both ends. Knurled rollers have knurling over centerof the roller length and have a serrated area at one end except where noted otherwise.

ITEM Roller Size Shafts Style Shpg. Price

1-2470 1.625˝ x 19¼˝ 12MM x ¾˝ Knurled 4 lbs. $7.99 1-2154-K 1.625˝ x 21⅝˝ 12MM x 15/16˝ Plain 4 lbs. $5.99 1-2154-I 1.9˝ x 2211/16˝ 17MM x 1˝ & ⅝˝ Knurled 9 lbs. $9.99 1-1879 1.9˝ x 23¼˝ 17MM x ⅝˝ and 1˝ Knurled 6 lbs. $9.99* Vinyl coated

78˝ Control CableITEM 1-3487$1.99• New, steel control cable. Vinyl coating oninner cable for smooth travel. Includes 3attachment brackets on jacket. Snaps into9/16˝ hole at each end.SPECIFICATIONS• Total lgth. 78˝ • Jacket O.D. 7/16˝• Travel 3⅜˝ • Connectors ⅜˝ dia. barrel• Cable dia. 0.15˝ • Shpg. 2 lbs.

¼˝ FlexibleCouplerITEM 1-2693$3.95• New PIC DESIGN Model T21-4 flexiblecoupling.SPECIFICATIONS• ¼˝ bore, both ends • Misalignment• RPM 1000 max. angular 10° max.• Torque 48 in-oz max. lateral 3/32˝ max.• Size 1⅛˝ x ⅞˝ x ⅞˝ • Shpg. ¼ lb.

148 Leeson Three Phase Motors www.surpluscenter.com8

Motor Frameand

Shaft Size

Premium Efficiency Three Phase Motors• Brand new LEESON premium efficiency motors. Meets orexceeds NEMA premium efficiency standards. Cast iron frameand base. No overload protection. Available as base mountonly or as face & base mount. Keyed shafts. All motors over150 lbs. ship truck freight only. All motors are 1800 RPM.SPECIFICATIONS FOR ALL• Voltage 208-230/460 VAC • Electrically reversible • Continuous duty• Service factor 1.15 • Enclosure TEFC • Ball bearings

Base Mount Face & Base MountITEM Model HP Amps Frame Shpg. Price ITEM Model HP Amps Frame Shpg. Price

10-2721 171640 1 3.2/1.6 145T 50 lbs. $ 256.95 10-2734 121936 1 3.8/1.9 145TC 47 lbs. $ 256.9510-2722 171646 1½ 4.8/2.4 145T 54 lbs. $ 298.85 10-2735 121180 1½ 4.8/2.4 145TC 37 lbs. $ 274.9510-2723 171647.6 2 6/3 145T 58 lbs. $ 314.60 10-2736 121181 2 5.8/2.9 145TC 43 lbs. $ 283.9510-2724 171320.6 3 7.6/3.8 182T 104 lbs. $ 413.30 10-2737 171565.6 3 8/4 182TC 104 lbs. $ 436.0010-2725 171322.6 5 12.8/6.4 184T 109 lbs. $ 406.40 10-2738 171566.6 5 12.8/6.4 184TC 109 lbs. $ 436.0010-2726 170157.6 7½ 18.6/9.3 213T 205 lbs. $ 557.55 10-2739 170165.6 7½ 18.4/9.2 213TC 205 lbs. $ 587.8510-2727 170140.6 10 25/12.5 215T 227 lbs. $ 648.40 10-2740 170167.6 10 25/12.5 215TC 217 lbs. $ 684.8010-2728 170066.6 15 36/18 254T 330 lbs. $ 960.55 10-2741 171587.6 15 36/18 254TC 340 lbs. $ 993.1010-2729 170007.6 20 49/24.5 256T 372 lbs. $1126.80 10-2742 171589.6 20 49/24.5 256TC 382 lbs. $1136.6010-2730 170011.6 25 59/29.5 284T 435 lbs. $1374.95 10-2743 171591.6 25 59/29.5 284TC 445 lbs. $1396.5010-2731 170015.6 30 70/35 286T 482 lbs. $1596.95 10-2744 171592.6 30 70/35 286TC 482 lbs. $1624.7010-2732 170019.6 40 92/46 324T 578 lbs. $2085.65 10-2745 171593.6 40 92/46 324TC 578 lbs. $2113.8010-2733 170023.6 50 117/58.5 326T 637 lbs. $2522.60 10-2746 171594.6 50 117/58.5 326TC 647 lbs. $2544.00Motors below Drop Ship Freight FREE in lower 48 states.

10-2817 170027.00 60 139/69.5 364T 900 lbs. $3474.9510-2818 170031.60 75 171/85 365T 1030 lbs. $3995.9510-2819 170087.60 100 225/112.5 405T 1070 lbs. $4499.9510-2820 * 170369.60 125 137.5 444T 1580 lbs. $5795.9510-2821 * 170371.60 150 163 445T 1630 lbs. $6615.9510-2822 * 170352.60 200 219 447T 2790 lbs. $7625.9510-2823 * G151516.60 250 275 449T 2550 lbs. $8669.9510-2824 * G151529.60 300 330 449T 2560 lbs. $9569.95* 460 VAC Only

Base Mount Face Mount Shaft56 56C ⅝˝ dia. x 1⅞˝, 3/16˝ keyway145T 145TC ⅞˝ dia. x 2¼˝, 3/16˝ keyway

182T, 184T 182TC, 184TC 1⅛˝ dia. x 2¾˝, 5/16˝ keyway213T, 215T 213TC, 215TC 1⅜˝ dia. x 3⅜˝, 5/16˝ keyway254T, 256T 254TC, 256TC 1⅝˝ dia. x 4˝, ⅜˝ keyway284T, 286T 284TC, 286TC 1⅞˝ dia. x 4⅝˝, ½˝ keyway324T, 326T 324TC, 326TC 2⅛˝ dia. x 5¼˝, ½˝ keyway364T, 365T 2⅜˝ dia. x 5⅞˝, ⅝˝ keyway405T, 444T 2⅞˝ dia. x 7˝, ¾˝ keyway

445T, 447T, 449T 3⅜˝ dia. x 8½˝, ⅞˝ keyway

Electric Motor Slide Mounts

• Brand new, WORLDWIDE ELEC-TRIC T-frame motor slide base. Useto mount NEMA standard electricmotor. Simplifies alignment and posi-tioning, ideal for tensioning belts.Steel construction with baked-onprimer. Washers included.

Find dimensional specifications and drawings for these items online.

CompatibleMotor Slide Adjusting Base Mount

ITEM Frame Size Length Screw Centers Foot Print Shpg. Price10-2431-56 56 3˝ 1 7⅝˝ x 5¾˝ 10⅝˝ x 6½˝ 5 lbs. $11.2010-2431-143T 143 3˝ 1 7½˝ x 6¾˝ 10½˝ x 7½˝ 8 lbs. $22.1010-2431-145T 145 3˝ 1 7½˝ x 7¾˝ 10½˝ x 8½˝ 9 lbs. $22.1010-2431-182T 182 3˝ 2 9˝ x 8½˝ 12¾˝ x 9½˝ 13 lbs. $29.9510-2431-184T 184 3˝ 2 9˝ x 9½˝ 12¾˝ x 10½˝ 13 lbs. $30.0510-2431-213T 213 3½˝ 2 10½˝ x 9½˝ 15˝ x 11˝ 18 lbs. $43.5510-2431-215T 215 3½˝ 2 10½˝ x 11˝ 15˝ x 12½˝ 20 lbs. $44.6510-2431-254T 254 4˝ 2 12½˝ x 13¼˝ 17¾˝ x 15⅛˝ 22 lbs. $59.9510-2431-256T 256 4˝ 2 12½˝ x 15˝ 17¾˝ x 16⅞˝ 23 lbs. $59.9510-2431-284T 284 4½˝ 2 14˝ x 15˝ 19¾˝ x 16⅞˝ 27 lbs. $68.4510-2431-286T 286 4½˝ 2 14˝ x 16½˝ 19¾˝ x 18⅜˝ 28 lbs. $66.7010-2431-324T 324 5¼˝ 2 16˝ x 17˝ 22¾˝ x 19¼˝ 38 lbs. $97.9510-2431-326T 326 5¼˝ 2 16˝ x 18½˝ 22¾˝ x 20¾˝ 39 lbs. $97.95



50 HP, 460 VACMotor

ITEM 10-3046 $1395.95• New, GENERAL ELECTRIC Model5K5405SL229.SPECIFICATIONS• Power 50 HP • Enclosure TENV• Voltage 460 AC • Duty continuous• Amperage 56 Amps • Frame 405TZ• Speed 1785 • Mount rigid base• Rotation reversible • Shaft 2⅛˝ dia. x 5⅞˝• Phase 3 with ½˝ keyway• Service factor 1.15 • Size 31˝ x 26˝ x 20˝• Bearings ball • Shpg. 1040 lbs.

ITEM 10-3047 $1695.95• Same as ITEM 10-3046 above except 75HP, 83.8 amps. Shpg. 1050 lbs.

7.5 HP HydraulicPumpDriveMotor

ITEM 10-2665 $249.95• New, BALDOR motor. Special socket ac-cepts hydraulic pumps with SAE A 2 boltmount and ⅝˝ dia. keyed shaft. No over-load protection.SPECIFICATIONS • Bearings ball• Model OCM3710-T • Enclosure TEFC• Power 7.5 HP • Duty continuous• Voltage 230/460 AC • Frame 215TZY• Amperage 26/13 Amps • Mount rigid welded base• Speed 1760 RPM • Shaft ⅝˝ dia. keyed• Rotation reversible socket for pump shaft• Phase 3 • Size 15˝ x 12˝ x 11˝• Service factor 1.15 • Shpg. 170 lbs.

Truck freight only.

800-488-3407 Three Phase Motors 149&

25 HP, 1180 RPMMotor

ITEM 10-2663$699.99

• New, LEESON ELECTRIC ModelG150002 general purpose motor.SPECIFICATIONS• Power 25 HP • Enclosure open drip-proof• Voltage 208-230/460 AC • Duty continuous• Amperage 78/39 Amps • Frame 324T• Speed 1180 • Mount rigid welded base• Rotation reversible • Shaft 2⅛˝ dia. x 5¼˝• Phase 3 w/⅜˝ keyway• Service factor 1.25 • Size 20¾˝ x 21˝ x 16˝• Bearings ball • Shpg. 530 lbs.

Truck freight only.

Leeson Three Phase Motors• Brand new LEESON fractional horsepower three

phase motors with steel motor frame and base.SPECIFICATIONS• Voltage 208-230/460• Service factor 1.15• Shaft ⅝˝ with keyway• RPM 1725• Electrically reversible rotation• Enclosure TEFC• No overload protection• Ball bearings• Continuous duty

ITEM Model HP Amps Frame Shpg Price10-2709 101079 ⅓ 1.3/0.65 56 22 lbs. $113.9510-2715 102922 ⅓ 1.3/0.65 56C 19 lbs. $126.6010-2710 100913 ½ 1.9-2/1 56 24 lbs. $121.8010-2716 102917 ½ 1.9-2/1 56C 19 lbs. $133.8510-2711 110034 ¾ 2.8/1.4 56 22 lbs. $133.1010-2717 110916 ¾ 2.8/1.4 56C 22 lbs. $145.9010-2712 110035 1 3.6-3.8/1.9 56 30 lbs. $148.3010-2718 110912 1 3.6-3.8/1.9 56C 24 lbs. $162.8010-2713 110444 1½ 4.6-5/2.5 56 30 lbs. $175.1510-2719 110918 1½ 4.6-5/2.5 56C 30 lbs. $196.5510-2714 113026 2 6.2/3.1 56 35 lbs. $198.2510-2720 116106 2 6.2/3.1 56C 36 lbs. $210.60

Phase Converters• Brand new PHASE-A-MATIC. Allows 3 phase electric motors to beoperated on 1 phase power. Converter is wired in between motor andpower line. 3 phase motors have advantages of lower current draw,simple reversing, lighter weight. These heavy duty converters are suit-able for long starting, frequent starting and reversing.• 3 phase motor will produce approx. ⅔ of its rated HP.• Order converters by size of motor being used with it. All models arefor 220 VAC power.

ITEM HP Full Load Amps Size Shpg. Price11-1876 ¾ to 1½ 5.2 10½˝ x 6˝ x 3½˝ 3 lbs. $183.7511-1877 1 to 3 9.6 10½˝ x 6˝ x 3½˝ 3 lbs. $204.7511-1878 3 to 5 15.2 10½˝ x 6˝ x 3½˝ 4 lbs. $262.5011-3281 4 to 8 22 9½˝ x 5⅛˝ x 3˝ 4 lbs. $304.5011-1879 8 to 12 33.6 14¼˝ x 6˝ x 3˝ 5 lbs. $414.7511-2048 12 to 18 50 13˝ x 8½˝ x 6˝ 21 lbs. $745.50

Variable Frequency1PH To 3PH ACMotor Control

ITEM 11-3424$150.80

• New TECO Model JNEV-101-H1. Vari-able frequency drive for controlling speedof a three phase motor from a single phasepower source. Keypad switches forStart/Stop and Speed control also has fre-quency set dial. Line doubler circuitry al-lows 115 VAC input to control 230 VACmotors. Programmable acceleration anddeceleration time, upper and lower fre-quency. Use with standard 3 phase induc-tion motors.SPECIFICATIONS• INPUT • OUTPUT100-120 VAC, 1 ph. 230 VAC, 3 ph.50/60 Hz 0-200 Hz17.9 Amps 4.2 Amps continuous

• 1 HP maximum (0.75 KW) • Terminals screw clamp• Display 3 digit • Size 5¼˝ x 3˝ x 5˝• Enclosure IP20 • Shpg. 4 lbs.

Variable FrequencyMotor Controls

11-3425-211-3425-3 11-3425-1

• New TECO. Variable frequency drive for controlling speed of a three phase motor. Key-pad switches for Start/Stop and Speed control. Programmable acceleration and decel-eration time, upper and lower frequency. Also has terminals for external controls toreverse motor or use external potentiometer (not included) for speed control. Internalcooling fan. Use with standard 3 phase induction motors.SPECIFICATIONS FOR ALL • INPUT • OUTPUT• Display 3 digit • Terminals screw clamp 200-240 VAC 0-240 VAC, 3 ph.• Enclosure IP20 50/60 Hz 0-200 Hz

INPUT OUTPUTAmps HP

ITEM Model Phase Amps Cont. Max. Size Shpg. Price11-3425-1 FM50-201-OC 1 9.4 4.2 1 5¼˝ x 3˝ x 5˝ 3 lbs. $148.9911-3425-2 FM50-202-C 1 OR 3 19/11 7.5 2 5½˝ x 4¾˝ x 6½˝ 5 lbs. $199.9911-3425-3 FM50-203-C 1 OR 3 27/16 10.5 3 5½˝ x 4¾˝ x 6½˝ 5 lbs. $269.99

1½ HP, 230 VACMotor

ITEM 10-2546$89.99

• New. Cast iron housing. Ball bearings.Four bolt base mount on 4˝ x 5½˝ centers.SPECIFICATIONS • Enclosure TEFC• Power 1½ HP • Duty continuous• Voltage 230 AC • Frame N/A• Amperage 5.3 Amps • Mount base• Speed 1720 RPM • Shaft 22mm diam. x 3½˝• Rotation reversible w/keyway• Phase 3 • Size 10˝ x 9½˝ x 7⅜˝• Bearings ball • Shpg. 44 lbs.

1 HP, 3 Ph.1140 RPM

ITEM 10-1346-A$89.50

• New MAGNATEK. Low speed motorgives high torque.SPECIFICATIONS• 1 HP • Reversible• 1140 RPM • Shaft ⅝˝ diam. x 2½˝• 200-230 V, 3 phase • Built for cradle mount• 5.2 amps (base not included)• 1.0 service factor • 6½˝ x 6½˝ x 10˝• Cont. duty • Shpg. 29 lbs.

1½ HP, 230/460 VAC3 PhaseMotor

ITEM 10-3015$179.95

• New, LEESON Model C145T17FB33WattSaver. Inverter-rated, speed range 10:1.Cast iron frame. No thermal overload protection.SPECIFICATIONS • Enclosure TEFC• Catalog # 120992.00 • Duty continuous• Power 1-1/2 HP • Frame 145T• Voltage 208-230/460 AC • Rigid base mount• Amperage 5.3-4.8/2.4 Amps six 0.41˝ dia. holes on• Speed 1800 RPM 5½˝ x 4˝ to 5½˝ centers• Rotation reversible • Shaft ⅞˝ dia. x 2¼˝• Phase 3 w/ 3/16˝ keyway• Service factor 1.15 • Size 11˝ x 8½˝ x 7˝• Bearings ball • Shpg. 47 lbs.

150 Three Phase Motors www.surpluscenter.com8

1 HP, 230/460 RPMMotor

ITEM 10-2497$79.99

• New, EBC Model EB001-4FKA. Cast ironhousing. 4 bolt face mount on 5⅞˝ dia. boltcircle. 4 bolt base mount on 4˝ x 5½˝ cen-ters. No thermal overload.SPECIFICATIONS• Power 1 HP • Enclosure TEFC• Voltage 230/460 AC • Duty continuous• Amperage 3.2/1.6 Amps • Frame 143TC• Speed 1725 RPM • Mount face & base• Rotation reversible • Shaft ⅞˝ dia. x 2¼˝• Phase 3 w/keyway• Service factor 1.15 • Size 11¼˝ x 10½˝ x 7¾˝• Bearings Ball • Shpg. 58 lbs.

2 HP, 230/4603 Phase

ITEM 10-2899$129.95

• New, TECHTOP Model BL3-AL-TF-2145T-2-B-D-2-F2-TB. Heavy duty con-nection box on side. Deep fins for cooling.Epact rated.SPECIFICATIONS• Power 2 HP • Enclosure TEFC• Voltage 230/460 AC • Duty continuous• Amperage 5.42/2.71 Amps• Frame 145T• Speed 3500 RPM • Mount rigid welded base• Rotation reversible • Shaft ⅞˝ dia. x 2⅛˝• Phase 3 w/3/16˝ keyway• Service factor 1.15 • Size 11˝ x 9˝ x 7˝• Bearings ball • Shpg. 33 lbs.

1½ HP,3480 RPM

3 Ph.ITEM 10-2112$88.95

• New GENERAL ELECTRIC. Open drip-proof motor with rigid base. Heavy dutycast iron body.SPECIFICATIONS• HP 1½ • Rotation reversible• RPM 3480 • Frame 143T• Voltage 230/460 AC • Shaft ⅞˝ diam. x 2¼˝• Phase 3 w/keyway• Amps 4/2 • Size 8¼˝ x 10˝ x 7½˝• Service factor 1.15 • Shpg. 54 lbs.

3 HP, 230/460 VACMotor

ITEM 10-2895$229.95

• New, WORLDWIDE ELECTRIC ModelWWHT3-18-182T high torque three phasemotor. Efficiency, 87.5% at full load. Castiron housing. Double shielded ball bear-ings. VFD rated 4:1 constant torque, 10:1variable torque PWM type. Six bolt basemount on 7½˝ wide x 4½˝ and 5½˝ centers.No thermal overload protection.SPECIFICATIONS• Power 3 HP • Enclosure TEFC• Voltage 230/460 AC • Duty continuous• Amperage 9.2/4.6 Amps • Frame 182T• Speed 17 RPM • Mount base• Rotation reversible • Shaft 1⅛˝ diam. x 2¾˝• Phase 3 w/ ¼˝ keyway• Service factor 1.15 • Size 12˝ x 9˝ x 9˝• Bearings ball • Shpg. 104 lbs.

3 HP, 3PH MotorITEM 10-2901$169.95

• New, TECHTOP Model GR3-CI-TF-182T-2-B-B-3-X1 NEMA premium inverter dutymotor. Heavy finned cast iron housing.SPECIFICATIONS• Power 3 HP • Enclosure TEFC• Voltage 208/230 AC • Duty continuous• Amperage 8.4/7.6 • Frame 182T• Speed 3510 RPM • Mount rigid welded base• Rotation reversible • Shaft 1⅛˝ dia. x 2¾˝• Phase 3 w/5/16˝ keyway• Service factor 1.25 • Size 12½˝ x 8½˝ x 9˝• Bearings ball • Shpg. 92 lbs.

Irrigation PumpDrive Motors

• Brand new, LEESON irrigation drivemotor. Vertical shaft down design. Steelconstruction. Rain canopy on side oppo-site of motor shaft. Epoxy painted for cor-rosion protection. Automatic thermaloverload protection.

ITEM 10-2765$328.95

SPECIFICATIONS • Enclosure TEFC• Power 1 HP • Duty continuous• Voltage 460 AC • Frame 56C• Amperage 2.4 Amps • Face mount four ⅜˝-16• Speed 1800 RPM tapped holes on 5⅞˝ B.C.• Rotation reversible • Shaft ⅝˝ dia. x 1⅞˝• Phase 3 w/3/16˝ keyway• Service factor 1.25 • Size 10.27˝ x 8.22˝ x 8.22˝• Bearings ball • Shpg. 33 lbs.

ITEM 10-2764$396.95

SPECIFICATIONS • Enclosure TEFC• Power 2 HP • Duty continuous• Voltage 460 AC • Frame 56J• Amperage 2.8 Amps • Face mount four ⅜˝-16• Speed 3450 RPM tapped holes on 5⅞˝ B.C.• Rotation reversible • Shaft threaded 7/16˝-20• Phase 3 UNF R.H. thread x 0.69˝• Service factor 1.25 • Size 11.78˝ x 8.22˝ x 8.22˝• Bearings ball • Shpg. 43 lbs.

2 HP, 230/460 VACMotor

ITEM 10-2900 $149.95• New, TechTop Model BL3-AL-TF-145T-2-B-D-2-F2-TB motor. Steel construction.Ball bearings. No thermal overload protec-tion.SPECIFICATIONS • Enclosure TEFC• Power 2 HP • Duty continuous• Voltage 230/460 VAC • Frame 145T• Amperage 5.4/2.71 amps • Mount base 4 holes on• Speed 3500 RPM 5½˝ x 5˝ centers• Rotation reversible • Shaft ⅞˝ dia. x 2¼˝• Phase 3 w/ 3/16˝ keyway• Service factor 1.15 • Size 11⅜˝ x 9⅜˝ x 6⅝˝• Bearings ball • Shpg. 30 lbs.



800-488-3407 Leeson Single Phase Motors 151&

5 HP, 230 VACMotors

• Brand new, LEESON. General purposeheavy duty motors for air compressors,pumps. No thermal overload.SPECIFICATIONS FOR BOTH• Power 5 HP • Enclosure ODP• Voltage 208-230 AC • Duty continuous• Rotation reversible • Frame 184T• Phase 1 • Mount rigid welded base• Service factor 1.15 • Shaft 1⅛˝ dia. x 2¾˝• Bearings ball w/¼˝ keyway

ITEM 10-1435 $509.35SPECIFICATIONS• Model 131537• Speed 1740 RPM • Size 12½˝ x 10¾˝ x 8˝• Amperage 23-21 amps • Shpg. 90 lbs.

ITEM 10-2753 $449.45SPECIFICATIONS• Model 131616• Speed 3600 RPM • Size 12¼˝ x 11˝ x 11¼˝• Amperage 24-22 amps • Shpg. 87 lbs.

5 HP, 208-230 VACCompressorDuty Motor

ITEM 10-2530$207.40

• Brand new, LEESON ELECTRIC Model116523 motor. High torque design forcompressor duty applications. Overloadprotection with manual reset. Steel frameand base. Welded base. Capacitorstart/capacitor run.SPECIFICATIONS• Power 5 HP special • Enclosure ODP• Voltage 208-230 VAC • Duty continuous• Amperage 15 Amps • Frame 56• Speed 3450 RPM • Mount base• Phase 1 • Shaft ⅝˝ diam. x 1⅞˝• Rotation reversible w/ 3/16˝ keyway• Service factor 1.0 • Size 9¼˝ x 7˝ x 8˝• Bearings ball • Shpg. 38 lbs.

Crop Dryer Motors• Brand new LEESON crop dryer motors. For use inair over and fan shaft design. Thermostats provide

thermal overload protection. Steelhousing. Grey epoxy painted.Double sealed ball bearings.Motor venting protected against

insects and rodents. End ofshaft tapped ¼-20. Capaci-tor start and run motor. Ca-pacitor shipped loose.

SPECIFICATIONS• Voltage 230 VAC • Speed 3450 RPM • Rotation Reversible • Phase 1 • ODP• Ball Bearings • Continuous Duty • Base Mount • SF 1.0

ITEM HP Amps Frame Shaft Shpg. Price10-2896 3-4.5 13 145TZ ⅞˝ dia. x 2¼˝ 50 lbs. $424.9510-2766 5-7.5 27.2 182TZ 1⅛˝ dia. x 3½˝ 94 lbs. $518.9510-2767 7.5-10 31 182TZ 1⅛˝ dia. x 3½˝ 98 lbs. $599.9510-2768 10-15 39.5 213TZ 1⅛˝ dia. x 4½˝ 195 lbs. $878.95

Leeson Farm DutyMotors

• Brand new LEESONheavy duty motors. Highstarting torque. Totally en-closed fan cooled with dou-ble shielded ball bearingsfor outdoor use. Capacitorstart. Manual reset thermaloverload protection. Cont.duty, reversible rotation,rigid mount. Single phase.

ITEM HP Voltage Amps RPM Frame Shaft Shpg. Price10-1024 ½ 115/230 8.8/4.4 1725 56 ⅝˝ 25 lbs. $176.9510-1025 ¾ 115/230 10.8/5.4 1725 56 ⅝˝ 28 lbs. $211.4510-1026 1 115/230 14/7 1725 56 ⅝˝ 32 lbs. $237.8510-1027 1½ 115/230 17.2/8.6 1725 56 ⅝˝ 41 lbs. $288.5510-1028 2 230 9.2 1725 56Hz ⅞˝ 48 lbs. $330.7010-1029 3 230 19 1740 184T 1⅛˝ 99 lbs. $495.9510-1323 5 230 23 1740 184T 1⅛˝ 106 lbs. $606.9510-1324 7½ 230 33.6 1740 215T 1⅜˝ 165 lbs. $872.9510-1325 10 230 40 1740 215T 1⅜˝ 197 lbs. $1063.95

Instant Reversing Motors• Brand new, LEESON instant reversingelectric motors. Specially designed for useon ̋ instant-reversing˝ parking gates, doors,slide gates or other moderate startingtorque instant reversing applications. Ca-pable of frequent reversing service. Instant˝plug-reversing˝ with simple three wire con-nection. Capacitor start induction run withsolid state, instant reversing switch. Man-ual overload protection.

SPECIFICATIONS• Rotation reversible • Phase 1 • Ball bearings • Base mount • Shaft ⅝˝ dia. x 2˝ w/ 3/16˝ keyway

ITEM HP Catalog # Voltage AC Amps RPM SF Enclosure Frame Size Shpg. Price10-2779 ⅓ 103794 115 4 1625 1 ODP JS56 8¼˝ x 5⅞˝ x 8⅜˝ 23 lbs. $288.5510-2780 ½ 100802 115 6.1 1625 1 ODP JS56 9½˝ x 5⅞˝ x 7⅞˝ 27 lbs. $215.9510-2781 ¾ 113642 115 7.2 1625 1 ODP 56H 10˝ x 6¾˝ x 8¼˝ 36 lbs. $270.6510-2782 ¾ 114932 115/208-230 11.4/5.7 1725 1.15 TEFC 56H 9⅜˝ x 8⅞˝ x 8⅜˝ 33 lbs. $334.2010-2783 1 114933 115/208-230 13.6/6.8 1725 1.15 TEFC 56H 9¾˝ x 9˝ x 8⅜˝ 33 lbs. $339.95

Single Phase TEFC Motors• Brand new LEESON. Totally enclosed fan cooled motors for awide range of applications. Ideal workshop motor for dirty envi-ronments. Capacitor start. Ball bearings. High starting torque.All position mounting.SPECIFICATIONS • Service factor 1.15• Voltage 115/208-230 AC • Duty continuous • Phase single • Rotation reversible• ITEMS 10-2751 and 10-2752 are LINCOLN brand

• 56C frame have ⅝˝ dia. shaft with keyway • 145TC frame have ⅞˝ dia. shaft with keyway1800 RPM Overload ITEM Model HP Amps Frame Protection Shpg. Price

10-2696 102916 ¼ 5.4/2.4-2.7 56C None 22 lbs. $131.45 10-2697 102930 ⅓ 6.2/2.9-3.1 56C None 24 lbs. $138.70 10-2703 103082 ⅓ 6.2/2.9-3.1 56C Manual 24 lbs. $145.90 10-2698 102907 ½ 8/3.8-4 56C None 24 lbs. $145.90 10-2704 103085 ½ 8/3.8-4 56C Manual 22 lbs. $154.35 10-2699 110905 ¾ 10.8/5.4 56C None 26 lbs. $162.80 10-2705 116922 ¾ 10.8/5.4 56C Manual 26 lbs. $166.40 10-2700 110908 1 12.8/6.4 56C None 30 lbs. $177.25 10-2706 115879 1 12.8/6.4 56C Manual 32 lbs. $184.50 10-2701 110910 1½ 17.2/8.8-8.6 56C None 39 lbs. $223.10 10-2707 116703 1½ 17.2/8.8-8.6 56C Manual 42 lbs. $231.55 10-2702 120274 2 18.4/9.2 145TC None 49 lbs. $271.35 10-2708 121465 2 18.4/9.2 145TC Manual 44 lbs. $279.803600 RPM Overload ITEM Model HP Amps Frame Protection Shpg. Price

10-2747 102929 ⅓ 5.6/2.5-2.8 56C None 22 lbs. $127.95 10-2748 102903 ½ 7/3.4-3.5 56C None 25 lbs. $132.65 10-2749 112135 ¾ 10/5.2-5 56C None 26 lbs. $181.25 10-2750 110180 1 12/6.2-6 56C None 28 lbs. $210.05 10-2751 * LM24539 1½ 14.2/7.7-7.1 56C None 34 lbs. $216.10 10-2752 * LM24729 2 18/10-9 56C None 40 lbs. $227.75

152 Single Phase Motors www.surpluscenter.com8

2 HP, 115/230 VACCompressorDutyMotor

ITEM 10-2619 $122.95• New, MARATHON ELECTRIC. Hightorque design for compressor duty appli-cations. Manual reset overload protection.SPECIFICATIONS• Power 2 HP Special • Enclosure ODP• Voltage 115/230 VAC • Duty continuous• Amperage 15/7.5 Amps • Frame 56• Speed 3450 RPM • Mount base• Phase 1 • Shaft ⅝˝ dia. x 1⅞˝• Rotation CCW w/ 3/16˝ keyway• Service factor 1.0 • Size 10¼˝ x 8˝ x 6½˝• Bearings ball • Shpg. 35 lbs.

3 HP, 230 VACCompressorDutyMotor

ITEM 10-2620$150.95• New, WEG Electric motor. High torquedesign for compressor duty applications.Manual reset overload protection.SPECIFICATIONS• Power 3 HP def. purpose • Enclosure ODP• Voltage 230 VAC • Duty continuous• Amperage 12.5 Amps • Frame 56• Speed 3420 RPM • Mount base• Phase 1 • Shaft ⅝˝ dia. x 1⅞˝• Rotation CCW w/ 3/16˝ keyway• Service factor 1.2 • Size 10˝ x 8˝ x 6½˝• Bearings ball • Shpg. 33 lbs.

5 HP, 208-230 VACCompressorDutyMotor

ITEM 10-2621 $238.95• New, US MOTORS motor. High torquedesign for compressor duty applications.Manual reset overload protection.SPECIFICATIONS• Power 5 HP def. purpose • Enclosure ODP• Voltage 208-230 VAC • Duty continuous• Amperage 22.5-22 Amps • Frame 56• Speed 3450 RPM • Mount base• Phase 1 • Shaft ⅞˝ dia. x 2¼˝• Rotation CCW w/ 3/16˝ keyway• Service factor 1.0 • Size 11¼˝ x 6½˝ x 6½˝• Bearings ball • Shpg. 45 lbs.

115/230 VACBelt & Direct Drive

Fan Motors• Brand new, LEESON commercial fan and blower electricmotor. Split phase motor. Designed for belt driven or fan-on-shaft applications. Steel construction. Built in terminal panelfor easy connection. Automatic thermal overload reset.

SPECIFICATIONS• Voltage 115/230 VAC • Speed 1800 RPM • Rotation reversible • Phase 1 • Base Mount• ODP • Ball bearings • Continuous duty • Shaft ½˝ dia. x 1⅝˝ w/ flat • Frame 48

ITEM HP Catalog # Amps SF Size Shpg. Price10-2773 ¼ 103797 4.6/2.3 1.35 7⅞˝ x 5⅞˝ x 5⅞˝ 16 lbs. $149.9510-2774 ⅓ 191869 5.8/2.9 1.35 8½˝ x 5⅞˝ x 5⅞˝ 20 lbs. $160.9510-2775 ½ 103796 8.4/4.2 1.25 8⅞˝ x 5⅝˝ x 5⅞˝ 22 lbs. $185.95

115 VAC Belt Drive Fan Motors• Brand new, LEESON fan motors. De-signed to power a belt driven fan. Steelhousing. Capacitor start and run. Spadeconnections on terminal board. Auto-matic thermal overload protection.

SPECIFICATIONS• 115 VAC • Speed 1800 RPM • Rotation reversible • Phase 1 • Base Mount• ODP • Ball bearings • Continuous duty • Shaft ½˝ dia. x 1⅝˝ w/ flat

ITEM HP Catalog # Amps SF Size Shpg. Price10-2776 ¼ M090602 2.5 1 8⅞˝ x 5¾˝ x 7¼˝ 18 lbs. $181.7510-2777 ⅓ M090405 3.2 1.35 8⅞˝ x 5¾˝ x 7¼˝ 22 lbs. $190.8510-2778 ½ M090585 4.6 1 9¾˝ x 6˝ x 7˝ 23 lbs. $234.60



¾ HP,115 VACMotor

ITEM 10-2834 $69.95• New, QUI WEI. On/Off pushbutton switchand circuit breaker in connection box. 5½ft. 16/3 line cord.SPECIFICATIONS • Enclosure TEFC• Power ¾ HP • Duty continuous• Voltage 115 AC • Frame 56C• Amperage 9 Amps • Mount rigid welded base• Speed 1150 RPM • Shaft ⅝˝ dia. x ¾˝• Rotation CCW stepped down to• Phase 1 ½˝ dia. x ⅝˝• Service factor 1.15 • Size 11˝ x 11½˝ x 7˝• Bearings ball • Shpg. 44 lbs.

⅓ HP, 115/230 VACMotor

ITEM 10-2843$99.99

• New, NORTH AMERICAN ELECTRICModel F56C1/3S4C. External connectionbox with reset button for thermal overload.Dual capacitors.SPECIFICATIONS• Power ⅓ HP • Enclosure TEFC• Voltage 115/230 AC • Duty continuous• Amperage 4.3/2.3 Amps • Frame 56C• Speed 1745 RPM • Mount rigid welded base• Rotation reversible • Shaft ⅝˝ dia. x 1⅞˝• Phase 1 w/3/16˝ keyway• Service factor 1.15 • Size 10˝ x 11½˝ x 9½˝• Bearings ball • Shpg. 26 lbs.

¾ HP, 115 VACCompressor

Motor

ITEM 10-2786 $79.99• New, MARATHON Model 9032(5KC49MN2049Y) electric motor for aircompressors. Manual reset thermal over-load protection.SPECIFICATIONS• Power ¾ HP • Enclosure ODP• Voltage 115 AC • Duty continuous• Amperage 12.5 Amps • Frame 56• Speed 3450 • Mount rigid welded base• Rotation CCW • Shaft ⅝˝ dia. x 1⅞˝• Phase 1 w/3/16˝ keyway• Service factor 1.0 • Size 9˝ x 6¼˝ x 8¼˝• Bearings ball • Shpg. 28 lbs.

1½ HP, 208-230 VACMotor

ITEM 10-2995$119.95

• New, MARATHON Model 5KCR48 UN -0667AX motor. Steel construction. Ballbearings . Capacitor start and run. Thermaloverload protection.SPECIFICATIONS • Enclosure ODP• Power 1½ HP • Duty continuous• Voltage 208-230 VAC • Frame 56HZ• Amperage 7.6-7.0 amps • Mount base 6 slots on• Speed 1725 RPM 2˝ to 5˝ x 3⅞˝ to 5¾˝• Rotation reversible • Shaft ⅝˝ dia. x 211/16˝• Phase 1 w/ 3/16˝ keyway• Service factor 1 • Size 10½˝ x 6½˝ x 7½˝• Bearings ball • Shpg. 41 lbs.

1 HP WEGMotor

ITEM 10-2671 $119.99• New, WEG ELECTRIC Model 00118OS -1BD56CFL. Capacitor start. Use with gearreducers. Footless.SPECIFICATIONS• Power 1 HP • Enclosure ODP• Voltage 115/208-230 AC • Duty continuous• Amperage 14/6.8/7 • Frame 56C• Speed 1740 RPM • Face mount only• Rotation reversible • Shaft ⅝˝ dia. x 1⅞˝• Phase 1 w/3/16˝ keyway• Service factor 1.15 • Size 12.3˝ x 5¾˝ x 7¾˝• Bearings ball • Shpg. 39 lbs.

800-488-3407 Single Phase Motors 153&

Leeson Single Phase Face & Base Mount TEFC Motors

• Brand new, LEESON general purpose electric motor. Face mountallows for direct coupling to pumps and gearboxes. Capacitor startand run. Steel housing. Manual reset thermal overload protection.

SPECIFICATIONS• Rotation reversible • TEFC • Phase 1

1800 RPMCatalog Shaft Service Overload

ITEM Number HP Voltage Amps Frame Dia. Factor Prot. Size Shpg. Price10-2886 131631.00 3 115/208-230 33.6/16.8 184TC 1⅛˝ 1.0 Manual 1315/16˝ x 11˝ x 115/16˝ 84 lbs. $796.4510-2888 131633.00 5 230 23 184TC 1⅛˝ 1.0 Manual 1315/16˝ x 11˝ x 115/16˝ 86 lbs. $803.7510-2890 140807.00 7½ 230 33.6 215TC 1⅜˝ 1.15 None 17⅛˝ x 13¼˝ x 11¾˝ 171 lbs. $924.7510-2892 140678.00 10 230 40 215TC 1⅜˝ 1.15 None 17⅝˝ x 13¼˝ x 11¾˝ 159 lbs. $1046.203600 RPM

Catalog Shaft Service OverloadITEM Number HP Voltage Amps Frame Dia. Factor Prot. Size Shpg. Price10-2885 121060.00 3 230 13 145TC ⅞˝ 1.0 Manual 10⅞˝ x 8⅞˝ x 8⅝˝ 51 lbs. $483.5010-2887 131632.00 5 230 19.8 184TC 1⅛˝ 1.15 Manual 1315/16˝ x 11˝ x 115/16˝ 103 lbs. $771.5010-2889 140694.00 7½ 208-230 36-32 213TC 1⅜˝ 1.0 None 1515/16˝ x 13⅛˝ x 1111/16˝ 150 lbs. $905.3010-2891 140695.00 10 208-230 44-41.5 215TC 1⅜˝ 1.0 None 18¾˝ x 13⅛˝ x 1111/16˝ 152 lbs. $1080.65

1½ HP, 115/230 VACGrain StirringMotor

ITEM 10-2769$299.95• Brand new, LEESON Model P6K17 -FB18H grain stirring motor. High torquedesign. Designed for use in grain bins. Ver-tical shaft up with drain hole. Capacitorstart and run motor. Steel construction.Manual overload protection.SPECIFICATIONS• Catalog # 111330.00 • Enclosure TEFC• Power 1½ HP • Duty continuous• Voltage 115/208-230 AC • Frame 56HZ• Amperage 17.2/8.8-8.6 • Base mount 6 hole mount• Speed 1800 RPM on 4⅞˝ x 3˝ to 5˝ centers• Rotation reversible • Shaft ⅞˝ dia. x 1.31˝• Phase 1 w/ 3/16˝ keyway• Service factor 1.0 • Size 11˝ x 8.89˝ x 8.56˝• Bearings ball • Shpg. 45 lbs.

184 TC Frame 213TC & 215TC Frame

1/20 HP, 3 Speed115 VACFan Motor

ITEM 10-2897$11.95• New, AO SMITH Model 326P196 fanmotor. Dual shafts. Removable torsion flexmounts. Push-on terminal connections.SPECIFICATIONS• Power 1/20 HP • Duty continuous• Voltage 115 • Frame 42Y• Amperage 1.6 • Mount 3 tabs 7˝ B.C.• Speed 1080/1010/930 RPM • Shafts (each has flat)• Rotation CCW (long shaft) front ½˝ dia. x 2⅛˝,• Phase 1 back ½˝ dia. x 1½˝, • Service factor cont. air over • Size 5˝ dia. x 3⅛˝• Bearings ball • Shpg. 7 lbs.

1 HP, 115 VAC3 SpeedMotor

ITEM 10-2827 $46.99• New, MARATHON ELECTRIC ModelP184 vertical fan motor for use in A/C con-densers. Must be in airflow. Thermally pro-tected. Requires 15 MFD 370 VACcapacitor (not included).SPECIFICATIONS• Power 1 HP • Enclosure ODP• Voltage 115 AC • Duty continuous air over• Amperage 10.8 • Frame 56Z• Speed 1075 • Mount face or cradle• Rotation reversible • Shaft ⅝˝ dia. x 6˝• Phase 1 w/flat and 3/16˝ keyway• Service factor 1.0 • Size 6½˝ dia. x 8½˝• Bearings ball • Shpg. 35 lbs.

154 Single Phase Motors www.surpluscenter.com8

¼ HP,1140 RPM

Motor

ITEM 10-2813$79.99

• Brand new, BALDOR Model 34F693-5613G1 capacitor start motor. External wiringbox for easy connection. Slotted base.SPECIFICATIONS • Bearings ball• Power ¼ HP • Enclosure ODP• Voltage 115/230 AC • Duty continuous• Amperage 6.4/3.2 Amps • Frame 48• Speed 1140 RPM • Mount rigid welded• Rotation reversible • Shaft ½˝ dia. x 1¾˝ w/flat• Phase 1 • Size 8¼˝ x 7˝ x 8˝• Service factor 1.15 • Shpg. 28 lbs.

¼ HP, 115 VACFan MotorITEM 10-2825$36.99

• New, GENERAL ELECTRIC, Model5KCP39SGR829AS. Designed for use inblower application. Air-over rating requiresmounting air pathway. Furnished withmounted capacitor. Thermally protected.SPECIFICATIONS• HP ¼ • Enclosure TENV• Voltage 115 VAC • Mount 4 studs on• Amps 3.6 amps face 5⅛˝ B.C.• Speed 1075 RPM two speed• Shaft ½˝ x 5˝ w/ flat• Duty continuous air over • Size 5½˝ dia. x 7˝• Rotation CW • Shpg. 25 lbs.

Ceiling FanMotor

ITEM 10-1134$12.88• New GE. 3 lug mount or hang fromthreaded end cap. Requires 5 mfd capacitor.SPECIFICATIONS • Reversible• Voltage 115 AC • Hollow shaft 17 mm dia.• RPM 225 x 1½˝ w/flat• Amps 1 • Size 5˝ diam. x 3˝• Cont. duty • Shpg. 10 lbs.

115 VAC FanMotor

ITEM 10-2614$6.99• New, made for Broan/Nutone fans. Ther-mal overload protection. Air over design.115 volt AC, single phase, open enclosure,continuous duty.SPECIFICATIONS• Model 5KSM84DFK132P • 1⅛˝ hex mounts each end• Amperage 0.56 Amps • Shaft 5/16˝ dia. x ⅞˝ w/flat• Speed 1550 RPM • Size 3.3˝ dia x 2½˝• Rotation CW • Shpg. 3 lbs.

Poultry Feed Auger Motors• Brand new, LEESON replacement poultry feed auger motors.Fully gasketed to keep dust out. Capacitor start motor.Mechanical centrifugal starting switch with overspeedprotection. Steel construction.Manual overload protection.

SPECIFICATIONS• Voltage 115/208-230 AC • Speed 1800 RPM • Rotation reversible• TEFC • Continuous Duty • SF 1.0•Phase 1 • Ball Bearings • Face mount two 0.343˝ dia. holes on 7¼˝ dia. B.C.

ITEM HP Catalog # Amps Frame Shaft Size Shpg. Price10-2758 ⅓ 117887 6.2/3.1 48Y ½˝ dia. x 1½˝ w/ flat 8½˝ x 8¾˝ x 85/16˝ 24 lbs. $187.9510-2759 ½ 117888 8/3.8-4 48Y ½˝ dia. x 1½˝ w/ flat 8½˝ x 8¾˝ x 85/16˝ 25 lbs. $205.9510-2760 ¾ 117889 10.8/5.3-5.4 48Y ½˝ dia. x 1½˝ w/ flat 9½˝ x 8¾˝ x 85/16˝ 31 lbs. $243.9510-2761 1 117883 14/7 56 ⅝˝ dia. x 131/32˝ w/ keyway 9½˝ x 89/16˝ x 8½˝ 38 lbs. $277.9510-2762 1½ 117884 13.4/7.2-6.7 56 ⅝˝ dia. x 131/32˝ w/ keyway 11⅝˝ x 89/16˝ x 83/16˝ 46 lbs. $292.95

½ HP, 230 VACMotorITEM 10-2826$48.99

• New, GENERAL ELECTRIC by REGALBELOIT. Model 5KCR49SN6373AX. Dualcapacitors. Thermally protected.SPECIFICATIONS• Power ½ HP • Enclosure ODP• Voltage 208-230 AC • Duty continuous• Amperage 2.8-2.6 • Frame 56• Speed 1140 RPM • Mount resilient cradle• Rotation CCW • Shaft ⅝˝ x 1⅞˝• Phase 1 w/3/16˝ keyway• Service factor 1.25 • Size 10˝ x 7½˝ x 8½˝• Bearings ball • Shpg. 36 lbs.

1/6 - 1/18 HP,115 VACMotor

ITEM 10-2894$39.99• New, MARATHON Model 4322 twospeed split phase fan motor. No thermaloverload.SPECIFICATIONS • Bearings ball• Power ⅙ - 1/18 HP • Enclosure ODP• Voltage 115 AC • Duty continuous• Amperage 3.4-1.9 Amps • Frame 48• Speed 1725/1140 RPM • Mount resilient cradle• Rotation reversible • Shaft ½˝ dia. x 1½˝ w/flat• Phase 1 • Size 8¼˝ x 5½˝ x 5¾˝• Service factor 1.35 • Shpg. 19 lbs.

230 VACFan Motor

ITEM 10-2756$4.99• New FASCO Model 7162588. Fan motorwith thermal protection. Sealed ball bear-ings. Requires 4 MFD, 370 VAC capacitor(not included).SPECIFICATIONS • Duty continuous air over• Voltage 230 VAC • Mount 2 studs from body• Amps 0.50 • 4 studs on face, 2.6˝ B.C• Speed 3200 RPM • Shaft 5/16˝ dia. x 1⅜˝ w/flat• Rotation CCW • Size 3⅜˝ dia. x 3½˝• Enclosure open • Shpg. 5 lbs.

800-488-3407 Single Phase Motors 155&

1 HP Pool/JetPumpMotor

ITEM 10-3020 $69.95• New, MARATHON Model 5KC38 -PN2534CX 1081 pool or jet pump motor.Special 4 bolt flange, voltage selectorswitch. Thermal overload protection.SPECIFICATIONS• Power 1 HP • Duty continuous• Voltage 115/230 AC • Frame 56Z• Amperage 12.2/6.1 Amps • Mount 4 bolt 7⅛˝ B.C.• Speed 3450 RPM • Shaft ⅝˝ dia. x 2⅛˝• Rotation CCW total lgth.• Phase 1 ½-20 UNF-2A• Service factor 1.25 RH threaded end• Bearings Ball • Size 11¾˝ x 6½˝ x 6¼˝• Enclosure ODP • Shpg. 25 lbs.

1 HP, 3460 RPMMotor

ITEM 10-2902 $89.99• New, TECHTOP totally enclosed fancooled capacitor start motor. Furnishedwith start/stop switch and 9.5 ft. 14/3 SJTline cord. Note: special keyway size.SPECIFICATIONS• Power 1 HP • Enclosure TEFC• Voltage 115 AC • Duty continuous• Amperage 9.6 Amps • Frame 143TCX• Speed 3460 RPM • Mount face• Rotation CW • Shaft ⅞˝ dia. x 2⅛˝• Phase 1 w/¼˝ keyway• Service factor 1.15 • Size 12½˝ x 8½˝ x 8½˝• Bearings ball • Shpg. 38 lbs.

Farm Duty Motors

Base Mount Face Mount Face & Base Mount 10-2915

• New, TECHTOP farm duty electric motors. Steel construction. Ball bearings. Capacitor start and run.Manual reset thermal overload protection.

SPECIFICATIONS: • Continuous duty • TEFC • Service Factor 1.15 • Reversible rotation

ITEM HP Voltage RPM Amps Shaft Frame Mount Shpg. Price10-2903 ⅓ 115/208-230 1725 3.7/2.0-1.85 ⅝˝ 56 Base 34 lbs. $119.9910-2904 ½ 115/230 1725 5.2/2.6 ⅝˝ 56 Base 36 lbs. $119.9910-2918 ½ 115/208-230 1725 5./2.9-2.6 ⅝˝ 56C Face 35 lbs. $119.9910-2919 ¾ 115/208-230 1725 7.4/4.1-3.7 ⅝˝ 56C Face 38 lbs. $144.9910-2905 ¾ 115/208-230 1725 7.4/4.1-3.7 ⅝˝ 56 Base 39 lbs. $144.9910-2906 1 115/208-230 1730 9.8/5.5-4.9 ⅝˝ 56H Base 43 lbs. $149.9910-2909 1 115/208-230 1730 9.8/5.5-4.9 ⅞˝ 143T Base 44 lbs. $149.9910-2912 1 115/208-230 1730 9.8/5.5-4.9 ⅞˝ 143TC Face & Base 45 lbs. $149.9910-2920 1 115/208-230 1730 9.8/5.5-4.9 ⅝˝ 56HC Face 43 lbs. $149.9910-2907 1½ 115/208-230 1730 13.8/7.6-6.9 ⅝˝ 56H Base 50 lbs. $179.9910-2910 1½ 115/208-230 1730 13.8/7.6-6.9 ⅞˝ 145T Base 50 lbs. $179.9910-2913 1½ 115/208-230 1730 13.8/7.6-6.9 ⅞˝ 145TC Face & Base 51 lbs. $179.9910-2921 1½ 115/208-230 1730 13.8/7.6-6.9 ⅝˝ 56HC Face 49 lbs. $149.9910-2923 1½ 115/208-230 1730 13.8/7.6-6.9 ⅝˝ 56HC Face 48 lbs. $149.9910-2908 2 115/208-230 1730 18.4/10.1-9.2 ⅝˝ 56H Base 55 lbs. $209.9910-2922 2 115/208-230 1730 18.4/10.1-9.2 ⅝˝ 56HC Face 54 lbs. $179.9910-2914 2 115/208-230 1730 18.4/10.1-9.2 ⅞˝ 145TC Face & Base 57 lbs. $209.9910-2915 3 208-230 1740 14.3-12.9 1⅛˝ 182TC Face & Base 101 lbs. $239.99

115/208-230 VAC Motors• New, TechTop motors. Steel construction. Ball bearings. Capac-itor start and run. No thermal overload protection.SPECIFICATIONS• Voltage 115/208-230 VAC • Service factor 1.15• Frame 56• Speed 1725 RPM • Bearings ball • Mount base 4 slots 4˝ to 5¾˝ x 3˝ ctrs.• Rotation reversible • Enclosure ODP • Shaft ⅝˝ dia. x 2˝ w/ 3/16˝ keyway• Phase 1 • Duty continuous • Size 8¾˝ x 8⅞˝ x 8¼˝

ITEM HP Amps Shpg. Price10-2938 ⅓ 3.7/2.0-1.85 31 lbs. $114.9910-2940 ¾ 7.4/4.1-3.7 34 lbs. $135.99

1½ HP, 115/230 VAC JetPump MotorITEM 10-2639$109.99

• New, MARATHON Model 5KCR39 SN -2757EX electric motor. Ideal jet pump re-placement motor. Capacitor start motor.No thermal overload protection.SPECIFICATIONS • Enclosure ODP• Power 1½ H P • Duty cont.• Voltage 115/230 VAC • Frame 56C• Amperage 15.8/7.9 amps • Mount four bolt face• Speed 3450 on 5⅞˝ diam.• Rotation CCW • Shaft ⅝˝ diam. x 2˝• Phase 1 w/ 3/16˝ keyway• Service factor 1.3 • Size 11⅜˝ x 6˝ x 7½˝• Bearings • Shpg. 29 lbs.



156 Leeson Washguard Series Motors www.surpluscenter.com8

¾ HP, 115/230 VAC LincolnElectric Motor

ITEM 10-3012$129.99

• New, LINCOLN ELECTRIC Model LM24791Signature Series agricultural duty general purpose

electric motor. Capacitor start. Steel housing. Thermal overloadprotection with manual reset. Made in the USA.SPECIFICATIONS• Power ¾ HP • Service factor 1.15 • Rigid base mount four• Voltage 115/208-230 AC • Bearings ball 0.34˝ diam. holes on• Amperage 11/5.4-5.5 Amps • Enclosure TEFC 4⅞˝ x 3˝ centers• Speed 1725 RPM • Duty continuous • Shaft ⅝˝ diam. x 1⅞˝• Rotation reversible • Frame 56 w/ 3/16˝ keyway• Phase 1 • Size 10˝ x 8.84˝ x 8.34˝ • Shpg. 30 lbs.

SPECIFICATIONS • TENV• Voltage 208-230/460 VAC • Continuous duty• Reversible rotation • Frame 56C• Phase 3 • Face mount 4 bolt on 5⅞˝ dia. B.C.• Service factor 1.15 • Shaft ⅝˝ dia. x 1⅞˝ w/ 3/16˝ key

3 Phase Face Mount OnlyCatalog

ITEM Number RPM HP Amps Shpg. Price10-2880 113473.00 1800 ½ 2-1.8/0.9 22 lbs. $317.9510-2881 113019.00 1800 ¾ 2.7-2.5/1.25 28 lbs. $367.9510-2882 113020.00 1800 1 3.2/1.6 32 lbs. $383.8510-2883 113021.00 1800 1½ 4.2/2.1 44 lbs. $400.0510-2884 114616.00 1800 2 6.2/3.1 48 lbs. $459.95

SPECIFICATIONS • Continuous duty• Voltage 115/208-230 VAC • Frame 56C• Reversible rotation • Solid state encapsulated starting switch• Phase 1 • Face mount 4 bolt on 5⅞˝ dia. B.C.• Service factor 1.15 • Base mount 4 bolt hole on 4⅞˝ x 3˝ centers• TEFC • Shaft ⅝˝ dia. x 115/16˝ w/ 3/16˝ key

Single Phase Face and Base MountCatalog

ITEM Number RPM HP Amps Shpg. Price10-2846 112526.00 1800 ⅓ 6.4/3.2 24 lbs. $304.9510-2848 112527.00 1800 ½ 8.8/4.4 26 lbs. $313.9510-2850 112528.00 1800 ¾ 10.8/5.4 33 lbs. $355.9510-2852 112529.00 1800 1 12.8/6.4 36 lbs. $409.9510-2845 113580.00 3600 ⅓ 5.2/2.7-2.6 30 lbs. $299.9510-2847 113581.00 3600 ½ 7.6/4-3.8 28 lbs. $304.9510-2849 113582.00 3600 ¾ 10/5.2-5 33 lbs. $336.9510-2851 113583.00 3600 1 12/6.2-6 34 lbs. $337.95Single Phase Face Mount Only

CatalogITEM Number RPM HP Amps Shpg. Price

10-2854 114311.00 1800 ⅓ 6.4/3.2 26 lbs. $301.9510-2856 114313.00 1800 ½ 8.8/4.4 26 lbs. $309.9510-2858 114315.00 1800 ¾ 10.8/5.4 34 lbs. $358.9510-2860 114317.00 1800 1 12.8/6.4 36 lbs. $405.9510-2853 114310.00 3600 ⅓ 5.2/2.7-2.6 28 lbs. $328.9510-2855 114312.00 3600 ½ 7.6/4-3.8 28 lbs. $334.9510-2857 114314.00 3600 ¾ 10.8/5.8-5.4 34 lbs. $334.9510-2859 114316.00 3600 1 12/6.2-6 34 lbs. $340.95

Leeson Washguard SeriesWhite Epoxy Coated Motors

• Brand new LEESON WASHGUARD Series motors. Designed tohandle high-pressure washdowns. White epoxy paint coat. Nothermal overload protection. Steel construction. Made in the USA.These are drop ship only items. Free shipping within lower 48 states.

SPECIFICATIONS • Continuous duty• Voltage 208-230/460 VAC • Frame 56C• Reversible rotation • Face mount 4 bolt on 5⅞˝ dia. B.C.• Service factor 1.15 • Shaft ⅝˝ dia. x 1⅞˝ w/ 3/16˝ key

3 Phase 1800 RPM Face Mount OnlyCatalog

ITEM Number HP Amps Enclosure Shpg. Price10-2875 191205.00 ½ 1.5 - 1.6/0.8 TENV 33 lbs. $307.9510-2876 191208.00 ¾ 2.4-2.3/1.15 TENV 38 lbs. $357.9510-2877 191290.00 1 3.1-3/1.5 TENV 45 lbs. $373.9510-2878 191225.00 2 6.2-6.5/2.9 TEFC 52 lbs. $439.95

SPECIFICATIONS• Voltage 115/230 VAC • Continuous duty• Reversible rotation • Frame 56C• Service factor 1.15 • Face mount 4 bolt on 57/8˝ dia. B.C.• Solid state encapsulated starting switch • Base mount 4 bolt hole on 4⅞˝ x 3˝ ctrs.• TEFC • Shaft ⅝˝ dia. x 1⅞˝ w/ 3/16˝ key

Single Phase Face and Base MountCatalog

ITEM Number RPM HP Amps Shpg. Price10-2862 191475.00 1800 ½ 8.2/4.1 32 lbs. $382.9510-2864 191477.00 1800 ¾ 9.8/4.9 39 lbs. $431.9510-2866 191479.00 1800 1 13.6/6.8 38 lbs. $444.9510-2868 191481.00 1800 1½ 15.8/7.9 53 lbs. $450.9510-2861 191474.00 3600 ½ 7.4/3.7 29 lbs. $352.9510-2863 191476.00 3600 ¾ 9.2/4.6 32 lbs. $379.9510-2865 191478.00 3600 1 12.4/6.2 32 lbs. $416.9510-2867 191480.00 3600 1½ 16.4/8.2 41 lbs. $416.95

Leeson SST Washguard SeriesStainless Steel Housing Motors

• Brand new LEESON SST WASHGUARD Series motors. De-signed to handle high-pressure washdowns. All stainless steel ex-ternal components. No thermal overload protection.These are drop ship only items. Free shipping within lower 48 states.

800-488-3407 AC Gearmotors 157&

62 RPM, 115 VAC

ITEM 5-1768 $8.99• New, Brevel 782 inline gear-motor. T.P.I. Model 8T-115-7AM209A10. Aluminum gearhousing. Shaded pole motor.Mounting holes tapped 8-32.SPECIFICATIONS • Enclosure open• Speed 62 RPM • Mnt. 4 holes on back face• Voltage 115 AC • Shaft ½˝ dia. x 1½˝ hollow• Amperage 4 Amps threaded 7/16-20 LH• Rotation CW • Size 2½˝ x 2˝ x 54¾˝• Duty intermittent • Shpg. 3 lbs.

135 RPM,115 VACITEM 5-1504$5.99• New MOLON LIM-30146-3. Inline gear-motor. 1.25 mFd capacitor included.SPECIFICATIONS• RPM 135 • Duty intermittent• Voltage 115 AC • Shaft ¼˝ dia. x ⅜˝ w/flat• Amps 0.1 • Mount two bolt face• HP 1/130 211/16˝ ctrs.• Torque 58 in-oz • Size 1⅞˝ x 2⅜˝ x 2⅜˝• Rotation reversible • Shpg. 1½ lbs.

15 RPM,115 VAC,Gearmotor

ITEM 5-1684$9.95• New, MERKLE-KORFF Model 3715UP-250. Thermally protected, shaded polemotor. Metal gear housing.SPECIFICATIONS • Face mt 3 untapped bosses• Speed 15 RPM • Shaft• Voltage 115 AC Threaded end 5/16˝-18 LH• Amperage 2.7 Amps Base end ⅜˝ dia. x ⅜˝ long• Power 97 Watts at idle Overall lgth. 15/16˝• Rotation CW • Size 3⅜˝ x 2½˝ x 4˝• Duty intermittent • Shpg. 3 lbs.

80 RPM,120 VACITEM 5-1572$8.95• New BREVEL Model Y. Inline parallelshaft gearmotor.SPECIFICATIONS • 4 hole face mount• RPM 80 19/16˝ x 1¼˝ ctrs.• Voltage 120 VAC • Shaft ⅜˝ diam. x ¾˝• Amps 2 (no load) w/ flat• Rotation CW • Size 3⅛˝ x 2½˝ x 4⅜˝• Duty intermittent • Shpg. 4 lbs.

115 VAC Inline Gearmotors• New, inline gearmotors. Ideal replacementcorn pellet stove, auger motor. Originally builtfor Bixby stoves. Aluminum gear housing.

1.8 RPM

ITEM 5-1771$18.95• Four 8-32 UNC tapped bolt hole facemount on 2⅜˝ x 2⅜˝ centers.SPECIFICATIONS• SPG Co. Model ISG-3220BXA(P/N 2051788)• Speed 1.8 RPM • Enclosure open• Voltage 115 AC • Mount face• Amperage 0.4 Amps • Shaft ½˝ dia. x 1¾˝,• Torque 110 in - lbs. ½-13 UNC RH threaded• Rotation CW • Size 3⅜˝ x 2¾˝ x 4¾˝• Duty intermittent (5 min) • Shpg. 5 lbs.

6.5 RPM

ITEM 5-1770$18.95• Four 10-32 UNF tapped bolt hole facemount on 2⅜˝ x 2⅜˝ centers. Integral brake.SPECIFICATIONS• SPG Co. Model ISG-3250BXA(P/N 2051746)• Speed 6.5 RPM • Enclosure open• Voltage 115 AC • Mount face• Amperage 2.65 Amps • Shaft ½˝ dia. x 1¼˝• Torque 225 in - lbs. w/keyway• Rotation CW • Size 5¼˝ x 2¾˝ x 4¾˝• Duty intermittent (1 min) • Shpg. 7 lbs.

8.4 RPM,230 VAC

ITEM 5-1505 $79.99• New BISON Model 014-500-0199. Paral-lel shaft inline gearmotor. Cast aluminumgear case with lifetime oil-bath lubrication.Mounts at any angle. Ball bearings. Manu-ally reset thermal overload protection.SPECIFICATIONS• RPM 8.4/7 • Duty interrmittent• Voltage 230 AC 60/50 Hz • Frame open• Amps 2.5 • Shaft 1˝ dia. x 1˝ with ⅝˝• HP ⅙ female hex drive socket• Torque 900 in. lbs. cont. • Mount four tapped• Torque 1100 in. lbs. int. holes 2½˝ BC• Gear ratio 199:1 • Size 7½˝ x 12˝ x 6˝• Rotation CW • Shpg. 24 lbs.743 RPM, 115 VAC Inline

Gearmotor

ITEM 5-1647 $39.99• Used, BODINE Electric, inline gearmotor.Includes run and start capacitors. Requiresrelay (not included) for start capacitor.SPECIFICATIONS • Rotation CW• Speed 743 RPM • Duty continuous• Voltage 115 AC • Enclosure open• Amperage 9.9 Amps • Mount face 3⅝˝ x 3⅝˝• Power 440 watts • Shaft 16mm x 3½ ̋w/keyway• Torque 44 in - lbs. • Size 5½˝ x 10½˝ x 5½˝• Gear ratio 2.42:1 • Shpg. 36 lbs.

115 VAC SynchronousTiming Motor

ITEM 10-958-A$1.89

• New. For timing, window display and signanimation, experimental purposes, etc.SPECIFICATIONS• 120 VAC • CCW rotation• 4.5 watts • Shaft 3/16˝ dia. 9 T gear• 60 Hz • Mount 2 bolt on 1⅞˝ ctrs.• Continuous duty • Size 1⅞˝ x 2˝ x 2½˝• 50 RPH • Shpg. 1 lb.

120 VAC, 16 RPMTiming Motor

ITEM 10-2332$3.99• New. For timing, window display and signanimation, experimental purposes, etc.Motor typically rotates CW, by design it willsometimes rotate CCW.SPECIFICATIONS• 120 VAC • Rotation varies• 3.5 watts • Shaft 5/32˝ sq. x ¼˝ long• 60 Hz • 2 hole mount on 2¼˝ ctrs.• Continuous duty • Size 29/16˝ x 2˝ x 1˝• 16 RPM • Shpg. ½ lb.

100 RPM115 AC

ITEM 5-1219$4.95

• New MERKLE-KORFF.SPECIFICATIONS • Duty intermittent• RPM 100 • Shaft 5/16˝ diam. x ½˝• Voltage 115 w/crosshole• Amps 1.25 • Mount front• Torque 4 in. lbs. • Size 2¾˝ x 2½˝ x 5¼˝• Rotation CCW • Shpg. 3 lbs.

115 VAC InlineGearmotors

$279.95 each• Brand new LEESON inline split capacitor gearmotors. Features steel gears and needlebearing supported output shaft. No thermal overload. Capacitor furnished.SPECIFICATIONS • Enclosure TENV• Voltage 115 AC • Rotation reversible • Mount four 10-32 holes on face, 2.645˝ x 2.645˝• Torque 100 in - lbs. • Duty continuous • Shaft ½˝ dia. x 1˝ w/⅛˝ keyway

ITEM Model RPM Amps HP Gear Ratio Size Shpg.5-1820-2 M1125050 1.9 0.4 1/150 900:1 7.25˝ x 3.63˝ x 3.63˝ 9 lbs.5-1820-9 M1125127 9 0.9 1/15 180:1 8.86˝ x 3.75˝ x 3.97˝ 11 lbs.5-1820-19 M1125128 19 0.9 1/15 180:1 8.86˝ x 3.75˝ x 3.97˝ 12 lbs.

5-1820-95-1820-2 5-1820-19

3600 RPMFan Motor

ITEM 10-1726$12.99• New FLEETRITE Model PM259. Perma-nent magnet.SPECIFICATIONS• Voltage 12 DC • Mount 6⅞˝ B.C.• Amps 1.6 no load • Shaft 5/16˝ x 1⅛˝ w/flat• 180 ohms resistance • Motor size 3˝ diam. x 5˝• RPM 3600 • Size w/mnt. 7¾˝ dia. x 5˝• Rotation reversible • Shpg. 6 lbs.

158 DC Motors www.surpluscenter.com8

6000 RPM,12 VDCITEM 10-2631$7.99• New, permanent magnet motor. Built foruse in battery powered weed trimmers.Could also be used as small DC generator.SPECIFICATIONS • Enclosure TENV• Voltage 12 DC • Duty intermittent• Amperage 1 Amps (no load) • Mnt. 2 studs rear 2¼˝ c/c• Speed 6000 RPM • Shaft ¼˝ dia. x 1˝ w/flat• Rotation reversible • Size 3.15˝ dia. x 1¾˝• Bearings bronze bushings • Shpg. 3 lbs.

450 RPM,12 VDCMotor

ITEM 10-2680 $39.95• New, TRUE-TORQUE by LEESON per-manent magnet motor. Built to drive ATVmounted salt spreader. Could also be usedas small DC generator.SPECIFICATIONS • Enclosure TENV• Voltage 12 DC • Duty intermittent• Amperage • Mount 2 studs at front,0.2 Amps (no load) 2½˝ c/c1.5 Amps (full load) • Shaft 5/16˝ dia. x 2˝

• Speed 450 RPM w/crosshole near motor end• Rotation reversible • Size 3˝ dia. x 4⅛˝• Bearings bronze bushings • Shpg. 5 lbs.

12 VDC, 5200 RPMReplacementTilt/TrimPumpMotor

ITEM 10-2618 $18.95• New, permanent magnet 12 VDC re-placement tilt/trim pump motor. Con-structed for marine environments SAEJ1171. Gaskets at end caps. Weather packconnectors.SPECIFICATIONS • Duty intermittent• Voltage 12 DC • Mount 2 bolt on• Amperage 5.3 amps (no load) 33/16˝ diam. B.C• Speed 5200 RPM • Shaft 5/16˝ diam. x 0.73˝• Rotation reversible ending in 4mm thick tang• Bearings ball • Size 5½˝ x 3¼˝ x 3¼˝• Enclosure TENV • Shpg. 5 lbs.

12 VDCMotor

ITEM 10-2548$14.99• New, MAMCO Model CP-12-132 perma-nent magnet motor. Designed to fit into a4.3˝ dia. opening with O-ring groove in edgeof front mounting flange. Shaft is partiallyrecessed in flange, extends ⅝˝ from face.SPECIFICATIONS • Bearings bronze sleeve• Voltage 12 DC • Enclosure TENV• Amperage 2.5 (no load) • Duty continuous• Speed 4400 RPM (no load) • Shaft 5/16˝ dia. x 1˝• Torque 45 in.oz. at w/threaded end3600 RPM 15 amps • Size 4.33˝ dia. x 4¾˝• Rotation reversible • Shpg. 5 lbs.

3000 RPM,12 Volt DCITEM 10-2689$59.95

• New, LEESON Model 970.620 commer-cial duty metric frame permanent magnetmotor.SPECIFICATIONS • Duty continuous• Power ⅙ HP • Frame 56D• Voltage 12 DC • Mount B14 face mount• Amperage 13.1 Amps (4 holes on 65mm B.C.)• Speed 3000 RPM • Shaft 9mm dia. x 20mm• Rotation reversible w/3mm keyway• Bearings ball • Size 3.3˝ dia. x 6˝• Enclosure TENV (IP44) • Shpg. 8 lbs. 12 VDC Motor

ITEM 10-2168 $10.99• New takeoffs VALEO Model 24021540.Permanent magnet type motor. Dual flexibleoutput shafts are ⅛˝ square. (Similar tospeedometer cable).SPECIFICATIONS • Duty intermittent• Voltage 12 VDC • 2 threaded mtg. holes at• Amps 2.5 no load one end of motor body• 4400 RPM • 15˝ end/end on shafts• Rotation reversible • Motor body 1¾˝x 1½˝x 4¾˝• Totally enclosed motor • Shpg. 2 lbs.

1/11 HP, 12 VDCMotor

ITEM 10-2521$16.99• New, PROTECH permanent magnet motor.SPECIFICATIONS• Power 1/11 HP • Duty intermittent• Voltage 12 DC • Mount two 10/32 studs• Amperage 8.4 Amps on face, 2˝ B.C.• Speed 2820 • Shaft 5/16˝ x ⅝˝ w/flat• Rotation reversible • Size 2½˝ dia. x 4½˝• Enclosure TENV • Shpg. 5 lbs.

12/24 VDCMotorITEM 10-2413$2.99• New, JOHNSON ELECTRIC Model64823 permanent magnet motor.SPECIFICATIONS• Voltage 12/24 DC • Enclosure open• Amperage 0.2 Amps • Mount 2 holes 25mm c/c• Speed 4700/10000 RPM • Shaft ⅛˝ dia x ½˝ long• Rotation reversible • Size 1.4˝ dia. x 2¼˝• Duty intermittent • Shpg. ½ lbs.

5200 RPM,24 VDC

ITEM 10-2491$5.99• New, GLOBE MOTORS Model403A6006-3. Permanent magnet design.Bronze sleeve bearings.SPECIFICATIONS • Bearings sleeve• Power .03 HP • Duty continuous• Voltage 24 DC • Mnt. four 6-32 holes 1˝ B.C.• Amperage 0.15 Amps • Shaft 0.156˝ dia. x 0.5˝• Speed 5200 RPM • Size 1.58˝ dia. x 2.52˝• Rotation reversible • Shpg. 1 lb.

3200 RPM, 12 VDCMotorITEM 10-2606$2.99• New, DAEWOO permanent magnetmotor. Originally for automotive power seatdrive. Accepts 3mm square flex drivecable into each end. Packard 12064750terminal (3/16˝ push-on spades).SPECIFICATIONS • Duty intermittent• Voltage 12 DC • Mount 2 screws each end• Amperage 1.1 Amps • Shaft female 3mm• Speed 3200 socket at each end• Rotation reversible • Size 2˝ dia. x 4⅝˝• Enclosure TENV • Shpg. 2 lbs.

2400 RPM, 18 VDCMotor

ITEM 10-1088$6.99• Unused, old inventory. UNIVERSALELECTRIC Co. Model YY1W027 motor.Bronze bushings with oil cups on shaft.Externally replaceable brushes.SPECIFICATIONS• Voltage 18 DC • Duty continuous• Amperage 1.9 Amps • Mnt. 2 studs face, 2⅜˝ c/c• Speed 2400 • Shaft ¼˝ dia. x 1⅜˝ w/ flat• Rotation CW • Size 3½˝ x 3˝ x 4˝• Enclosure open • Shpg. 2 lbs.

13.6 VDCMotorITEM 10-2465

$1.99• New, JOHNSON permanent magnet mo-tors. Metal housing. Face mount acceptstwo M3 x 0.5 machine screws on 25 mmB.C.SPECIFICATIONS • Mount face• Model HC615-6506 • Duty intermittent• Voltage 13.6 DC • Speed 4575 RPM• Amperage 1.4 Amps • Shaft 3.33 mm (0.131˝) dia.• Rotation reversible x 21/32˝, knurled• Torque 3.5 in-oz. • Size 115/32˝ O.D. x 211/32˝• Enclosure open, vented • Shpg. 1 lb.



800-488-3407 DC Motors 159&

⅓ HP,90 VDC

ITEM 10-2427-A$149.99

• New, HALLMARK INDUSTRIES ModelMD0503C permanent magnet motor. Bolton/off steel base. Class F insulation.SPECIFICATIONS • Bearings ball• Power ⅓ HP • Enclosure TENV• Voltage 90 DC • Duty continuous• Amperage 3.7 Amps • Frame 56C• Form factor 1.35 • Mount face & base• Speed 1750 RPM • Shaft ⅝˝ x 1⅞˝,• Torque 12 in-lbs. 3/16˝ keyway• Rotation reversible • Size 911/16˝ x 6⅛˝ x 7⅜˝• Service factor 1.0 • Shpg. 23 lbs.

3400 RPM,24 VDCITEM 10-1796$9.95• New BUEHLER MOTOR INC. Dual shaft,permanent magnet motor.SPECIFICATIONS • Mount face• Voltage 24 DC 3 bolts on 11/16˝ BC• Amps 0.15 no load • Shafts• RPM 3435 5/32˝ diam. x ¾˝ w/flat• Rotation reversible 5/32˝ diam. x 7/16˝• Enclosure fully enclosed • Size 19/16˝ diam. x 3˝• Duty intermittent • Shpg. 2 lbs.

0.4 HP, 24 VDCMotor

ITEM 10-3016 $119.95• New, AMETEK-PITTMAN precision per-manent magnet DC motor. Model 3334-M5156. Could also be used as a directcurrent generator.SPECIFICATIONS • Duty continuous• Power 0.4 • Torque 225 oz. in.• Voltage 24 DC • Mount 4 holes on• Amperage 15 amps face 2¾˝ square• Speed 1800 RPM • Shaft ½˝ dia. x 1⅛˝• Rotation reversible w/⅛˝ keyway• Bearings ball • Size 3¼˝ x 3¼˝ x 8˝• Enclosure TENV • Shpg. 12 lbs.

1 HP, 12 DCITEM 10-1690$179.50

• New DELCO. Compound wound DC motor.SPECIFICATIONS • Duty intermittent• HP 1 • Mount base• Voltage 12 DC • Dual stepped shafts• Amps 90 1st sec. 0.985˝ dia. x 2.735˝• RPM 1750 2nd sec. 0.875˝ dia. x 4.135˝• Rotation reversible • Size 11½˝ x 7½˝ x 8˝• Enclosure ODP • Shpg. 58 lbs.

4½-12 VDCITEM 10-1741-A$5.29

• New Model FRS-540S. Includes 3 ca-pacitors to filter electrical “noise”.SPECIFICATIONS• Voltage 4½-12 DC • Duty intermittent• Amps 0.62 no load • Mount 2 bolt on 1˝ ctrs.• RPM 8500 no load • Shaft ⅛˝ dia. x ⅝˝ w/flat• Rotation reversible • Size 1⅜˝ diam. x 2¼˝• Enclosure open • Shpg. ¾ lb.

Winch MotorITEM 10-1839$89.95

• Brand new. Built as replacement motorfor commercial winches. Series wound.SPECIFICATIONS • Frame 3˝ pilot ring• Voltage 12 DC • Mnt. 4 tapped holes 4˝ BC• Amps 50 no load • Shaft ¾˝ diam. x 1¾˝• RPM 8000 w/keyway• Rotation reversible • Size 4˝ x 4˝ x 7¾˝• Duty intermittent • Shpg. 22 lbs.

1800 RPM Motors• Brand new, WORLDWIDE ELECTRIC permanentmagnet motors. Bolt on/off steel base.Class F insulation. 20:1 speedrange at constant torque.

SPECIFICATIONS FOR ALL• Voltage 12 DC • Service factor 1.0 • Frame 56C• Speed 1800 RPM • Bearings ball • Mount face & base• Rotation reversible • Duty continuous • Shaft ⅝˝ x 1⅞˝ w/3/16˝ keyway

12 VDCITEM HP Amps Torque Enclosure Size Shpg. Price10-2571 ⅓ 26.4 0.97 lb.ft. TENV 8.1˝ x 5.87˝ x 7.63˝ 20 lbs. $197.9510-2572 ½ 40 1.46 lb.ft. TENV 10˝ x 5.87˝ x 7.63˝ 23 lbs. $233.9510-2573 ¾ 61.2 2.19 lb.ft. TEFC 11.4˝ x 5.87˝ x 7.63˝ 30 lbs. $274.0510-2574 1 82.2 2.92 lb.ft. TEFC 12.2˝ x 5.87˝ x 7.63˝ 35 lbs. $305.1090 VDC See page 148 for compatible speed controllers.

ITEM HP Amps Torque Enclosure Size Shpg. Price10-2575 ⅓ 3.5 0.97 lb.ft. TENV 8.1˝ x 5.87˝ x 7.63˝ 21 lbs. $171.7510-2576 ½ 5.2 1.46 lb.ft. TENV 10˝ x 5.87˝ x 7.63˝ 23 lbs. $219.7510-2577 ¾ 7.8 2.19 lb.ft. TEFC 11.4˝ x 5.87˝ x 7.63˝ 30 lbs. $249.7010-2578 1 10.4 2.92 lb.ft. TEFC 12.2˝ x 5.87˝ x 7.63˝ 33 lbs. $279.2510-2579 1½ 15.4 4.38 lb.ft TEFC 14.38˝ x 5.87˝ x 7.63˝ 40 lbs. $301.75

12 VDC Motor

ITEM 10-2893$29.95

• New, permanent magnet motor. Built todrive agricultural spray pumps. 5 mountingbosses on front cover for attaching pump.Could also be used as DC generator. Rub-ber isolators for holes in mounting base.SPECIFICATIONS • Bearings ball• Power ¼ HP • Enclosure TENV• Voltage 12 DC • Duty continuous• Speed/Amps • Frame rigid welded base• 2600 RPM, 2.2 amps no load• Mount 4⅛˝ x 2½˝• 2300 RPM, 25 amps, • Shaft 5/16˝ dia. x 11/16˝ w/flat7 in.lbs. torque • Size 4¼˝ dia. x 4½˝

• Rotation reversible • Shpg. 8 lbs.

9 RPM, 90 VDC InlineGearmotor

ITEM 5-1804$269.95• New, LEESON M1115025 inline gearmo-tor. Use with speed controller (not in-cluded) to have variable speed with 115VAC input.SPECIFICATIONS • Duty continuous• Speed 9 RPM • Enclosure TEFC• Voltage 90 VDC • Face mount 4 bolt,• Amperage 0.5 Amps 3.375˝ square• Power 1/20 HP • Base mount• Torque 268 in.lbs. • Shaft ⅝˝ dia. x 1˝,• Gear ratio 216:1 3/16˝ keyway• Overhung load 474 lbs. • Size 4.06˝ x 8.57˝ x 5.13˝• Rotation reversible • Shpg. 12 lbs.

5200 RPM, DC Voltage Motors

$3.99 each• New, GLOBE MOTORS. Permanent magnet design.SPECIFICATIONS FOR ALL• Power 0.005 HP • Rotation reversible • Bronze sleeve bearings • Enclosure closed• Speed 5200 RPM • Mnt. two 6-32 holes 1˝ c/c • Duty continuous • Shpg. ½ lb.

ITEM Model Voltage Amps Shaft Size10-2482 405A100 6 DC 0.2 ⅛˝ dia. x ⅜˝ 1.27˝ dia. x 1.85˝10-2490 405A6001 28 DC 0.125 ⅛˝ dia. x ½˝ 1.25˝ dia. x 1.8˝10-2492 397A1073 24 DC 0.125 ⅛˝ dia. x ¼˝ 1.25˝ dia. x 2.25˝10-2493 405A1192 24 DC 0.125 ⅛˝ dia. x ½˝ 1.25˝ dia. x 1.85˝

160 Motor Controllers www.surpluscenter.com8Stop/StartStations

• New, WEG. Manually operated stop/startcontrol for single or 3 phase motors. Ro-tary on/off switch and pushbutton reset.Overload relay can be adjusted. Can alsobe used with external pilot devices such aspressure switches.

7.5 HPITEM 11-3448 $149.99SPECIFICATIONS• Model ESW-50V24C-R38 • Overload relay 32-50 amps• Coil voltage 208-240 VAC • Three phase ratings• Single phase ratings 230 Volts 15 HP 42 FLA230 Volts 7.5 HP 40 FLA 460 Volts 30 HP 40 FLA

• Size 7½˝ x 6½˝ x 13˝ • Shpg. 12 lbs.

5 HPITEM 11-3447 $119.99SPECIFICATIONS • Overload relay 22-32 amps• Model ESW-32V24C-R34 • Three phase ratings• Coil voltage 208-240 VAC 230 Volts 10 HP 28 FLA• Single phase ratings 460 Volts 20 HP 27 FLA115 Volts 2 HP 24 FLA • Size 5½˝ x 6˝ x 9˝230 Volts 5 HP 26 FLA • Shpg. 8 lbs.

Variable SpeedDC MotorControl

ITEM 11-3304$239.15• Brand new, WORLD WIDE ELECTRICModel WDCCONT variable speed DCmotor controller. Designed for DC perma-nent magnet, shunt wound and some uni-versal (AC/DC) motors. Enclosed andgasketed cover rated NEMA 4/12. Integralpotentiometers for setting minimum andmaximum speed, acceleration and decel-eration, torque and IR compensation.ON/OFF switch and speed control poten-tiometer on cover face. Heatsink inte-grated into housing.SPECIFICATIONS• Input voltage 120/240 VAC• Output: 90 VDC at 120 VAC, 180 VDC at 240 VAC• Amperage F.L.A. 10.8 amps DC• Speed regulation/range1% regulation over 50:1 speed range• HP range⅛ HP to 1 HP at 90 VDC, ¼ HP to 2 HP at 180 VDC• Mount 4 bolt on 5⅛˝ x 5½˝ centers• Size 7˝ x 59/16˝ x 3¼˝ • Shpg. 4 lbs.

ITEM 11-3304-R $338.95• Same as ITEM 11-3304 above exceptModel WDCCONTREV variable speed DCmotor controller with reverse. Integral po-tentiometers for setting minimum andmaximum speed, acceleration and decel-eration, torque and IR compensation.FWD/OFF/REV switch and speed controlpotentiometer on cover face.

Order Resistor Order Fuse ITEM # ITEM # $3.55 $3.60

DC MotorController

ITEM 11-2102$182.95• Brand new. Multi-drive solid state DCspeed control. For operating permanentmagnet or shunt wound motors. Completewith dual voltage switch for input voltagesof 120 VAC or 240 VAC, line fuse, ON/OFFswitch, and variable speed dial.• Runs ¾ HP, 90-130 VDC motors on 120VAC input; 1½ HP, 180 VDC motors with240 VAC input. With auxiliary heatsinkraise HP rating to 1 HP at 120 VAC inputand 2 HP at 240 VAC. Requires plug-in HPresistor and fuse (not incl. - see below).Shpg. 3 lbs.

Plug-in HP Resistorand Motor Fuse

• Order ITEM number(s) corresponding toyour HP requirement. AC Line Voltage 120 VAC 240 VAC Motor Voltage90-130 VDC 180 VDC at HP Listed at HP Listed 1/12 - ⅛ ⅙ - ¼ 11-2102-R37 11-2102-F39 ⅛ - ⅕ ¼ - ⅓ 11-2102-R38 11-2102-F40 ⅙ ⅓ 11-2102-R38 11-2102-F41 ¼ ½ 11-2102-R39 11-2102-F42 ⅓ ¾ 11-2102-R40 11-2102-F43 ½ 1 11-2102-R41 11-2102-F44 ¾ 1½ 11-2102-R42 11-2102-F45 1* 2* 11-2102-R43 11-2102-F46* Requires auxiliary heatsink.

Auxiliary HeatsinkITEM 11-2102-H$49.80

Braking SwitchITEM 11-2102-S$82.95

• Optional forward/brake/reverse switch.Provides resistance in circuit for brakingand also reverses motor. Shpg. 1 lb.

SCR Motor SpeedControl forDC Motors

ITEM 11-2269 $84.95• Brand new MINARIK Model MM23001C.Adjustable SCR speed controller for per-manent magnet or shunt wound, brushtype motors. Ideal for motors in the rangeof 1/20 HP to 2 HP. Compact design in in-dustry standard MM footprint. Optionalheatsink (sold separately) can be added toboost output current capacity. Integral po-tentiometers for setting minimum andmaximum speed, acceleration and de cel -era tion, torque and IR compensation.Speed control potentiometer included.SPECIFICATIONS • 5 amps output,• Input 115 or 230 VAC, 10 amps w/heatsink50/60 Hz • ⅛ HP to 1 HP at 90 VDC• Armature voltage • ¼ HP to 2 HP at 180 VDC(115 VAC IN): 90 VDC • 1% regulation over(230 VAC IN): 180 VDC 60:1 speed range• Size 45/16˝ x 319/32˝ x 119/32˝ • Shpg. 2 lbs.

HeatsinkITEM 11-2269-H $54.95• Heatsink drilled and tapped for use withITEM 11-2269 DC motor controller. Size6⅞˝ x 4⅜˝ x 1˝. Shpg. 2 lbs.

High AmperageDC CircuitBreakers

$21.95 each• Brand new BUYERS direct current circuitbreaker. Plastic housing with rubber gas-ket, rubber caps for terminal studs. Pushbutton trip, manual reset. Waterproof.SPECIFICATIONS FOR ALL• Max. voltage 30 VDC • Mount two hole• Terminal studs ¼-28 on 27/16˝ ctrs.• Size 215/16˝ x 115/16˝ x 1⅜˝ • Shpg. ¼ lb.

ITEM Amperage11-3317-30 30 Amps11-3317-50 50 Amps11-3317-60 60 Amps11-3317-90 90 Amps11-3317-100 100 Amps11-3317-120 120 Amps11-3317-150 150 Amps11-3317-200 200 Amps

Full WaveBridgeRectifierITEM 22-1206$4.99• New Model KBPC-2510. Changes alter-nating current to direct current. Use withappropriately-sized heat sink (not in-cluded). ¼˝ spade terminals, center holemount. 35 amps, 1000 VAC. ¼˝ spade ter-minals. Size 1⅛˝ x 1⅛˝. Shpg. ¼ lb.

5 HP MagneticStarter

ITEM 11-1713 $164.50• Brand new. NEMA 1 enclosure. Rated at5 HP, 230 VAC. Two pole contactor. Ther-mal overload coil is rated between 22-32amps. Manual reset button on cover. 230volt coil. Size 11˝ x 6½˝ x 5½˝. Shpg. 6 lbs.

1.6 RPM, 12 VDCInlineGearmotorITEM 5-1741$18.99• New, RP2020 inline gearmotor. Ideal re-placement corn pellet stove auger motor.Aluminum gear housing. Six 10-32 bolt holeface mount on 115/16˝ - 4⅜˝ x 2⅜˝ centers.SPECIFICATIONS • Duty continuous• Speed 1.6 RPM • Enclosure open• Voltage 12 DC • Mount face• Amperage 350 mA • Shaft ⅜˝ diam. x 1˝ w/flat• Torque 78 in - lbs. • Size 3¾˝ x 2¾˝ x 4¾˝• Rotation reversible • Shpg. 3 lbs.

800-488-3407 12 VDC Gearmotors 161&


ITEM 5-1834 $337.30• Brand new, LEESON Model M1125 254.00offset permanent magnet gearmotor.Grease filled gearcase with steel gears. Ex-ternally accessible brushes. Ball Bearings.SPECIFICATIONS • Rotation reversible• Speed 24 RPM • Duty continuous• Voltage 12 DC • Enclosure TENV• Amperage 10.6 Amps • Mount four 5/16-18 tapped• Power ⅛ HP holes on face (3.375˝ sq.)• Torque 280 in.lbs. • Shaft ⅝˝ dia. x 15/16˝• Gear ratio 76:1 w/3/16˝ keyway• Overhung load • Size 9˝ x 3¾˝ x 6⅛˝capacity 353 lbs. • Shpg. 12 lbs.

40 RPM, 12 VDCRight-AngleGearmotors

• Brand new, BUYERS PRODUCTS. Hightorque, right-angle gearmotor built to fitcommon truck and trailer tarp systems.Forged drive gear, aluminum gearboxhousing and motor end-cap, steel motorhousing. Gearbox is sealed to preventcontamination. Includes a chromed plasticbolt-on cover and mounting hardware.Shaft has two 5/16˝ cross-holes spaced ¾˝apart. Five mounting holes in face of gear-box tapped 5/16˝-18.

ITEM 5-1719 $184.95SPECIFICATIONS • Rotation reversible• P/N 5541095 • Duty intermittent• Speed 40 RPM • Totally enclosed• Voltage 12 DC • Mount five tapped holes• Amperage 33-50 Amps • Shaft ¾˝ x 3⅛˝• Power 0.53 HP w/ two cross-holes• Torque 836 in-lbs. • Size 10˝ x 6˝ x 3⅜˝• Gear ratio 90:1 • Shpg. 14 lbs.

ITEM 5-1720 $199.95SPECIFICATIONS • Rotation reversible• P/N 5541895 • Duty intermittent• Speed 40 RPM • Totally enclosed• Voltage 12 DC • Mount five tapped holes• Amperage 33-75 Amps • Shaft ¾˝ x 3⅛˝• Power 1.2 HP w/ two cross-holes• Torque 1890 in-lbs. • Size 11⅛˝ x 6˝ x 3⅜˝• Gear ratio 90:1 • Shpg. 16 lbs.

25 RPM, 24 VDCGearmotorITEM 5-1796$11.95• New, SEI Model 37JB270G/32ZYT30-2468 compact inline gearmotor. Operateson 12-24 VDC.SPECIFICATIONS • Rotation reversible• Speed 25 RPM (no load) • Duty continuous• Voltage 24 DC • Mount four M3 holes face• Amperage 60 mA (no load) • Shaft 6mm x 0.6˝ w/flat• Torque 8 in. lbs. • Size 1.45˝ dia. x 2.2˝• Gear ratio 270:1 • Shpg. ½ lb.


ITEM 5-1809$12.95• New, HANKSCRAFT inline permanentmagnet gearmotor. External gear drive toget final RPM. Has stub shafts on eachgear to give reciprocating motion. 3 holemounting bracket.SPECIFICATIONS• Speed 72 RPM on • Enclosure openexternal shaft • Mount 3 holes on face

• Voltage 12 DC • Shaft 3/16˝ dia. x .07˝,• Amperage 0.1 Amps knurled• Rotation reversible • Size 1½˝ dia. x 2⅝˝• Duty continuous • Shpg. 1 lb.

42 RPM, 12 VDCGearmotorITEM 5-1683$13.95

• New, Molon Model CHM-1245-1. Slottedoutput from gearbox. Includes 1˝ dia. x 8⅝˝long 5 section rubber drive roller for output.SPECIFICATIONS• Speed 42 RPM • Duty continuous• Voltage 12 DC • Mount 4 holes 2½˝ x 2⅜˝• Amperage 0.85 Amps • Shaft 5/16˝ female w/3/16˝ slot• Torque 8 in - lbs. • Size 2¾˝ x 2¾˝ x 3˝• Rotation reversible • Shpg. 2 lbs.

2 RPM, 12 VDCGearmotorITEM 5-1763$14.95• New, inline gearmotor. Slotted stainlesssteel shaft. Plastic, iron and steel gearswith heat treatment on final output gear.Die cast zinc gear housing.SPECIFICATIONS• Speed 2 RPM • Duty continuous• Voltage 12 DC • Shaft 3/8˝ dia. x 3.8˝• Amperage 0.8 Amps • Shaft slot(fully loaded) 0.118 wide x 1˝ long• Torque 75 in - lbs. • Size 2¾˝ x 3˝ x 2½˝• Rotation reversible • Shpg. 1 lb.

61 RPM,12 VDCGearmotorITEM 5-1802$229.95• Brand new, LEESON Model M1125220.Inline permanent magnet gearmotor. Alu-minum housing with permanent greaseand steel gears. Externally accessiblebrushes. Ball bearings.SPECIFICATIONS • Duty continuous• Speed 61 RPM • Enclosure TENV• Voltage 12 DC • Mount 4 holes on face• Amperage 10.4 (3.375˝ sq.) and foot• Power ⅛ HP • Shaft ⅝˝ dia. x 1½˝• Torque 113 in.lbs. w/3/16˝ keyway• Gear ratio 29:1 • Size 8.57˝ x 4˝ x 5⅛˝• Rotation reversible • Shpg. 14 lbs.

ITEM 5-1835 $229.95• Same as ITEM 5-1802 above except 51RPM, torque 130 in. lbs., gear ratio 35:1.Size 9¾˝ x 4˝ x 5⅛˝.

100 RPM, 12 VDCGearmotor

ITEM 5-1649$59.95• Brand new, STATURE ELECTRIC ModelRA-AFSL-30AN-35 right-angle gear-motor.Ball bearings and bronze bushings, steelworm gear, brass output gear and die castaluminum gearbox. Two pole, permanentmagnet motor with internal brushes. Threemounting holes tapped for M6 machinescrews. Rated to withstand 300 in-lbs.max back-drive torque.SPECIFICATIONS• Speed 100 RPM • Rotation reversible• Voltage 12 DC • Duty intermittent• Amperage 3.0 no load, • Fully enclosed, IP546.0 cont., 62 peak • Face mount, tapped holes

• HP 1/30 cont. • Shaft 7/16˝ dia. x 27/16˝ w/flat• Torque 20 in-lbs. cont. • Size 7⅜˝ x 3⅛˝ x 4⅜˝• Gear ratio 35:1 • Shpg. 7 lbs.

140 RPM, 12 VDCGearmotorITEM 5-1765$9.95

• New, compact inline permanent magnetgearmotor.SPECIFICATIONS• Speed 140 RPM • Mount 3 M3 tapped holes• Voltage 12 DC on face• Amperage • Shaft 5mm dia. x 10mm0.13 Amps (no load) w/flat

• Rotation reversible • Size 1¼˝ dia. x 27/16˝• Duty intermittent • Shpg. ½ lb.

62 RPM, 12 VDCGearmotorITEM 5-1832$9.95• New, BOSCH right angle permanentgearmotor. Automotive style as used forwindows, seats ,etc. Hollow thru shaft.SPECIFICATIONS• Speed 62 RPM (no load) • Mount single hole thru body• Voltage 12 DC • Shaft 0.36˝ thru hole• Amperage 2 Amps w/4 external grooves• Rotation reversible • Size 7¼˝ x 1½˝ x 3˝• Duty intermittent • Shpg. 2 lbs.

178 RPM,12 VDC

ITEM 5-1779$49.99

• New, KLAUBER MACHINE, inline perma-nent magnet gearmotor.SPECIFICATIONS• Speed 178 RPM • Duty continuous• Voltage 12 DC • Enclosure TENV• Amperage 9.5 Amps • Mount face, 4 holes 2⅜˝ sq.• Power 1/10 HP • Shaft 5/16˝ dia. x ¾˝• Torque 25 in - lbs. w/crosspin hole• Gear ratio 18:1 • Size 6½˝ x 3½˝ x 4˝• Rotation reversible • Shpg. 5 lbs.

179 RPM, 12 VDCParallelShaft

ITEM 5-1800$79.95

• New, DUOYOU MOTOR permanent mag-net, parallel shaft gearmotor. Cast aluminumgear housing and motor end cap with steelmotor frame. Hardened steel gears.SPECIFICATIONS • Duty continuous• Speed 179 RPM no load • Enclosure TENV• Voltage 12 DC • Mount 4 hole base• Amperage 3.4 Amps on 1½˝ x 4˝ ctrs.• Torque 35 in-lbs • Shaft ⅝˝ dia. x 1½˝• Rotation reversible with 3/16˝ keyway• Overhung load • Size 8½˝ x 4¾˝ x 4¾˝capacity 150 lbs. • Shpg. 11 lbs.

162 DC Gearmotors www.surpluscenter.com8


ITEM 5-1754$9.99

• New, permanent magnet, right anglegearmotor. Cast aluminum gear housingwith steel motor frame. Hollow squarethru-drive output shaft. Two bolt rubberisolation mount.SPECIFICATIONS• Speed • Duty intermittent500 RPM no load • Enclosure TENV250 RPM at rated torque • Mount ⅜˝ dia. two bolt• Voltage 12 DC on 2.2˝ centers• Amperage 16 Amps • Hollow thru-shaft 5/32 ̋(4 mm)• Torque 8.5 in-lbs • Size 5¼˝ x 3⅛˝ x 2½˝• Rotation reversible • Shpg. 3 lbs.

51 RPM, 90 VDCInlineGearmotor

ITEM 5-1836$361.25• Brand new, LEESON Model M1125 -247.00 offset permanent magnet gearmo-tor. Use with speed controller (notincluded) to provide variable speed oper-ation with 115 Volt AC input. Grease filledgearcase with steel gears. Externally ac-cessible brushes. Ball bearings.SPECIFICATIONS • Rotation reversible• Speed 51 RPM • Duty continuous• Voltage 90 DC • Enclosure TENV• Amperage 1.4 Amps • Mount four 5/16-18 tapped• Power ⅛ HP holes on face (3.375˝ sq.)• Torque 130 in.lbs. • Shaft ⅝˝ dia. x 15/16˝• Gear ratio 35:1 w/3/16˝ keyway• Overhung load • Size 9˝ x 3¾˝ x 6⅛˝capacity 277 lbs. • Shpg. 12 lbs.


ITEM 5-1782$8.95• New, BUEHLER Model 1.61.065.305 in-line permanent magnet design. Very com-pact and powerful.SPECIFICATIONS• Voltage 6 DC • Enclosure TENV• Amperage 0.15 A (no load) • Duty continuous• Speed 44 RPM (no load) • Mount 3 tapped holes• Performance 34 RPM • Shaft 2.5mm x 10mm w/flatw/1.3 in.lb. torque 0.28 amps• Size 29mm x 40mm x 28mm

• Rotation reversible • Shpg. 1 lb.


ITEM 5-1813$9.95• New, BUEHLER Model 1.61.065.344 in-line permanent magnet design gearmotor.Very compact and powerful.SPECIFICATIONS• Voltage 18 DC • Enclosure TENV• Amperage 0.06 A (no load) • Duty continuous• Speed 91 RPM (no load) • Mount 3 tapped holes• Performance 64 RPM • Shaft 2.5mm x 10mm w/flatw/0.8 in.lb. torque 0.12 amps• Size 29mm x 40mm x 28mm

• Rotation reversible • Shpg. 1 lb.

2000 RPM, 12 VDCFlange MotorITEM 10-2523$1.99• New, EBMM2G055-BD87-06 motor. Origi -nally intended to drivedraft induction blowers. Equi-lateral triangle flange mount. Onemtg. hole each corner on 63/16˝ centers.SPECIFICATIONS • Enclosure open• Power 8 Watts • Duty continuous• Voltage 12 DC • Mount face• Amperage 0.8 Amps • Shaft ¼˝ dia. x 2˝ w/ flat• Speed 2000 • Size 513/16˝ x 513/16˝ x 2⅛˝• Rotation CW • Shpg. 2 lbs.


ITEM 5-1816$15.95• New, permanent magnet, right angle,worm gear reduction gearmotor. Built forseat back adjustment in vehicles. Cast alu-minum gear housing with steel motor frame.Hollow square thru-drive output shaft. Twobolt rubber isolation mount. Two pin maleintegral Packard Power Connection.SPECIFICATIONS • Rotation reversible• Speed 500 RPM no load • Duty intermittent• Speed 220 RPM • Enclosure TENVat rated torque • Mount ⅜˝ dia.

• Voltage 12 DC two bolt on 2.2˝ centers• Amperage 22 Amps • Hollow thru-shaft 5/32 ̋(4 mm)at rated torque • Size 5½˝ x 3⅛˝ x 2½˝

• Torque 16 in-lbs • Shpg. 3 lbs.

140 RPM 4.5 VDCGearmotor

ITEM 5-1795$9.95• New, SOURCE ENGINEERING inline per-manent magnet gearmotor. Low voltageand compact size.SPECIFICATIONS • Duty continuous• Speed 140 RPM • Mount four M3 holes face• Voltage 4.5 DC • Shaft 6mm dia. x 15mm• Amperage 0.21 Amps w/flat• Torque 12 in. oz. • Size 2¼˝ dia. x 1½˝• Rotation reversible • Shpg. 1 lb.


ITEM 5-1685$14.95

• New, MERKLE-KORFF parallel shaftgearmotor. Die-cast gear housing. Six un-tapped mounting holes for #8 thread-form-ing screws.SPECIFICATIONS • Duty intermittent• Speed 62 RPM • Mount• Voltage 9 DC Six thru-holes on• Amperage 0.23 no load 21/16˝ x 123/32˝ centers• Gear ratio 46.1:1 or• Rotation reversible 21/16˝ x 229/32˝ centers• Shaft 5/16˝ dia. x ⅞˝ • Size 3¼˝ x 2½˝ x 3⅝˝w/flat & snap-ring groove • Shpg. 2 lbs.

Screwjack

ITEM 1-3074 $9.95• New, ball screw type screwjack. De-signed to convert rotary motion to linearmotion. Two grease zerks in both swiveleye housings. Retracted length measuredfrom swivel eyes center to center.SPECIFICATIONS • 4 revolutions per 1˝ travel• Travel 5½˝ • Rod end mount swivel-ball• Input gear Pin hole ⅜˝ diam.Gear Type helical • Base end mount swivel-ballOutside diam. 3⅛˝ Pin hole ⅜˝ diam.Gear tooth angle 40° • Size 12˝ x 4˝ x 4˝• Bearing 2.165˝ O.D. • Shpg. 6 lbs.

1.5 VDC AnimationMotorITEM 5-1692$3.99

• New, HANKSCRAFT MOTORS, batteryoperated motor with gear reduction drivinga pivoting arm. Holes to mount hanginglightweight objects at each end of arm. Greatfor animation. Low torque output. Should bemounted flat. Operates on 1 D cell battery.Geartrain and battery exposed, no powerswitch (runs when battery is in place).SPECIFICATIONS• Voltage 1.5 VDC • Arm travel• Cycles/minute 33 3⅜˝ side 1• Arm lgth. 7⅝˝ 1⅝˝ side 2• Rotation reversible • Size 4¾˝ x 4⅝˝ x 1⅞˝• Arm rotation 45° • Shpg. ½ lb.

800-488-3407 DC Gearmotors 163&

68 RPM, 24 VDCITEM 5-1447$18.99• New BUEHLER.SPECIFICATIONS • Rotation reversible• RPM 68 • Duty intermittent• Voltage 24 DC • Shaft 0.2˝ dia. x ⅜˝ w/flat• Amps 50 mA • Mount face• Watts 1.2 • Size 1⅜˝ diam. x 2⅝˝• Torque 14 in. oz. • Shpg. ¾ lb.

180 RPM,24 VDCITEM 5-1812$8.95• New, inline gearmotor. Die cast zinc gearhousing. Will operate on 12 volts at re-duced output speed.SPECIFICATIONS • Shaft ¼˝ dia. x ⅝˝• Speed 180 RPM w/dual flats and crosshole• Voltage 24 DC • Shaft crosshole ⅛˝• Amperage 0.6 Amps • Mount 4 bolt• Torque 2.5 in - lbs. 1.25˝ x 1.56˝ centers• Rotation reversible • Size 2¾˝ x 2½˝ x 2¾˝• Duty continuous • Shpg. 1 lb.

128 RPM,36 VDC

5-1423-R Pictured

• MAGNETEK. Series wound gearmotor.built for subway door openers. Operateson 36 volts DC. Available with either left orright output shaft. Aluminum gearboxhousing.SPECIFICATIONS• RPM 128 • Shaft 1¼˝ dia. x 1⅜˝ long• Voltage 36 DC stepped to ⅝˝ dia. x ⅞˝ long• Amps 0.8 at 36 VDC no load w/keyway• Ratio 14:1 • Mount base• Rotation reversible • Size 15˝ x 4½˝ x 7½˝• Duty continuous • Shpg. 20 lbs.

ITEM 5-1423-R $59.99ITEM 5-1423-L $59.99

120 RPM, 22 VDC InlineGearmotors

• New, IGARASHI permanent magnet in-line gearmotors. Spur geartrain.SPECIFICATIONS• Speed 120 RPM-no load • Duty continuous• Voltage 22 DC • Mount 3 holes on face,• Amperage 90 mA no-load M3 thread• Performance 70 RPM • Shaft 5mm dia. x 7mm

w/50 oz.in. torque, 500 mA w/flat• Gear ratio 50 • Size 1.3˝ dia. x 2.5˝• Rotation reversible • Shpg. 1 lb.

ITEM 5-1810 $9.99• Includes rubber boot over brushholders.

ITEM 5-1811 $9.99• Brushholders are exposed.

35 RPM,24 VDC

ITEM 5-1257$9.95• New take-offs MOLON. Inline parallelshaft gear motor. Rated 24 volt DC, will runon 12 volt DC at lower speed and torque.SPECIFICATIONS • Duty continuous• RPM 35 • Shaft 5/16˝ x ¾˝ long w/flat• Voltage 24 DC • Mount face 2⅜˝ x 2½˝• Torque 38 in. lbs. full load drilled/tapped• Torque 7.5 in. lbs. cont. • Size 2¾˝ x 3˝ x 23/16˝• Rotation reversible • Shpg. 2 lbs.

45 RPM, 24 VDCInlineGearmotorITEM 5-1660$9.95• New, Molon Model CHM-2435-1. Hightorque output. 4⅞˝ wheel with o-ring onedge to friction drive equipment. Use fordrive wheel on robots. Operates at ½ speedon 12 VDC. Permanent magnet motor.SPECIFICATIONS • Duty continuous• Speed 45 RPM • Mount 4 tapped holes• Voltage 24 DC 2⅜˝ x 2½˝• Amperage 0.28 • Shaft 5/16˝ dia.• Torque 7.5 in-lbs. • Size 2¾˝ x 2¼˝ x 3˝• Rotation reversible • Shpg. 1½ lbs.

30 RPM,24 VDC

ITEM 5-1358$24.95• New MULTI-PRODUCTS CO. INC.#2738. Offset gearbox.SPECIFICATIONS• RPM 30 • Duty continuous• Voltage 24 DC • Shaft 11 mm dia. x 12 mm• Amps 0.68 no load w/dual flats• HP 1/45 • Mnt. 4 bolt 2½˝ x 2˝ pattern• Torque 47 in. lbs. • Size 4½˝ x 3˝ x 4¾˝• Rotation reversible • Shpg. 5 lbs.

15 RPM, 24 VDC

ITEM 5-1451$4.95• New CKD Model J209-056. DC synchro-nous motor attached to removable mtg.bracket.SPECIFICATIONS• RPM 15 • Shaft 3/16˝ diam. x• Voltage 24 DC ½˝ long w/flat• Amps 0.2 no load • Mount 2 bolt on 313/32˝ BC• Rotation CW • Size 4˝ x 1¾˝ x 2˝• Duty intermittent • Shpg. 1 lb.


ITEM 5-1693$14.95• New, MABUCHI inline parallel shaft gear-motor. Die-cast gear housing. Mtg.holesare drilled and tapped with 10-32 thread.SPECIFICATIONS • Enclosure open• Speed 109 RPM • Mount 4 bolt face on• Voltage 24 DC 2⅜˝ x 2½˝ centers• Amperage 78 mA (no load)• Shaft 5/16˝ dia. x ⅜˝ w/ flat• Rotation reversible • Size 2⅞˝ x 2¾˝ x 33/16˝• Duty intermittent • Shpg. 2 lbs.

152 RPM, 36 VDCGearmotorITEM 5-1801$7.99• New, MAXON A-max, very compact per-manent magnet precision gearmotor. Willoperate on 12-36 VDC.SPECIFICATIONS• Speed 152 RPM • Mount three• Voltage 36 DC M2x1.5 holes, 17mm B.C.• Gear ratio 64.4:1 • Shaft 2.7mm dia.• Power consumption 5 watts x 4mm w/flat• Rotation reversible • Size 15/16˝ dia. x 2˝• Duty continuous • Shpg. ½ lb.


ITEM 5-1687$89.95• Used PARVALUX permanent magnetright angle gearmotor. Heavy duty con-struction.SPECIFICATIONS • Rotation reversible• Speed 30 RPM • Duty continuous• Voltage 50 DC • Mount base• Amperage 1.3 Amps • Shaft 15 mm x 2˝ w/keyway• Torque 62 in - lbs. • Size 9˝ x 5˝ x 5½˝• Gear ratio 96:1 • Shpg. 16 lbs.


ITEM 5-1839 $119.95• New take-off, SolFocus P/N 350-000058-000 permanent magnet inline gearmotor.Rated for 24 volts but will operate on 12volts at reduced speed and output.SPECIFICATIONS• Speed 171 RPM • Enclosure TENV• Voltage 24 VDC • Face mount 4 bolt, 80mm• Amperage 12 Amps (3.150˝) bolt circle• Power ⅓ HP • Mount pilot 60mm (2.362˝)• Torque 9.1 Nm (80.5 in.lbs.) • Shaft 14mm (0.551˝) dia. x• Gear ratio 18.7:1 15/16˝ long with 5mm keyway• Rotation reversible • Size 12⅛˝ x 4⅝˝ x 5½˝• Duty continuous • Shpg. 19 lbs.


ITEM 5-1840 $149.95• New take-off, SolFocus P/N 350-000062-000 permanent magnet inline gearmotor.Rated for 24 volts but will operate on 12volts at reduced speed and output.SPECIFICATIONS • Duty continuous• Speed 5 RPM • Enclosure TENV• Voltage 24 VDC • Face mount 2 bolt, 106mm• Amperage 4.2 Amps (4.173˝) bolt circle• Power 1/10 HP • Mount pilot 68mm (2.677˝)• Torque 109 Nm • Shaft 25mm (0.984˝) dia. x

(964.8 in.lbs.) 1½˝ long 18T spline• Gear ratio 266.3:1 • Size 18⅝˝ x 53/16˝ x 6¼˝• Rotation reversible • Shpg. 40 lbs.

164 Linear Actuators www.surpluscenter.com8

Heavy Duty LinearActuatorMountingBracket Kit

ITEM 5-1679-B $31.95• Brand new mounting bracket kit for usewith 500 pound and 1000 pound I.D. serieslinear actuators. Made from billet alu-minum. Includes mounting hardware. Soldindividually, order 2 kits per actuator.SPECIFICATIONS• Clevis

Inside width 1⅛˝; Outside width 2½˝; Throat depth 1¼˝• Size 2.75˝ x 2.50˝ x 2.45˝ • Shpg. 2 lbs.

30 Amp, 12 VDC PolarityReversingSwitches

$14.95 each

ITEM 11-3334 Maintained action

ITEM 11-3334-A Momentary action

Find more information online!

• Brand new. Metal housing is water resist-ant and sealed against dust. Non-ad-justable limit switches at end of strokeboth directions.SPECIFICATIONS • 0.59 in/sec. at max load• 12 VDC • Permanent magnet motor • Pin holes ¼˝• Amps no load 0.6, full load 3.4 • 110 lb. max load capacity • Shpg. 5 lbs.

Without PotentiometerITEM Model Stroke Retracted Lgth. Size Price

5-1845-2 LACT2 50mm (1.96˝) 6¼˝ 6⅞˝ x 111/16˝ x 3¼˝ $82.955-1845-4 LACT4 100mm (3.93˝) 8¼˝ 8⅞˝ x 111/16˝ x 3¼˝ $82.955-1845-6 LACT6 150mm (5.90˝) 10¼˝ 10⅞˝ x 111/16˝ x 3¼˝ $82.955-1845-8 LACT8 200mm (7.87˝) 12¼˝ 12⅞˝ x 111/16˝ x 3¼˝ $82.955-1845-10 LACT10 250mm (9.84˝) 14¼˝ 14⅞˝ x 111/16˝ x 3¼˝ $82.955-1845-12 LACT12 300mm (11.81˝) 16¼˝ 16⅞˝ x 111/16˝ x 3¼˝ $82.95

With Potentiometer For use with controller kits

Built-in potentiometer allows for use with position-sensing circuits. ITEM Model Stroke Retracted Lgth. Size Price

5-1577-2 LACT2P 50mm (1.96˝) 711/16˝ 85/16˝ x 111/16˝ x 3¼˝ $94.955-1577-4 LACT4P 100mm (3.93˝) 911/16˝ 105/16˝ x 111/16˝ x 3¼˝ $94.955-1577-6 LACT6P 150mm (5.90˝) 1111/16˝ 125/16˝ x 111/16˝ x 3¼˝ $94.955-1577-8 LACT8P 200mm (7.87˝) 1311/16˝ 145/16˝ x 111/16˝ x 3¼˝ $94.955-1577-10 LACT10P 250mm (9.84˝) 1511/16˝ 165/16˝ x 111/16˝ x 3¼˝ $94.955-1577-12 LACT12P 300mm (11.81˝) 1711/16˝ 185/16˝ x 111/16˝ x 3¼˝ $94.95

12 VDC, 110 lb. Linear Actuators

12 VDC, 500 lb. & 1000 lb. Linear Actuators• Brand new heavy duty linear actuators.500 lb. actuators have ACME screw drive,1000 lb. actuators have ball screw. Metalhousing is water resistant and sealedagainst dust. Permanent magnet motor.No limit switches or potentiometer.

500 lb. Linear ActuatorsRetracted.

ITEM Model Stroke Lgth. Size Shpg. Price5-1679-4 LACT4A-500A 4.01˝ (102mm) 10.24˝ 11.24˝ x 3.04˝ x 5.97˝ 9 lbs. $194.305-1679-6 LACT6A-500A 6.02˝ (153mm) 12.24˝ 13.24˝ x 3.04˝ x 5.97˝ 11 lbs. $196.505-1679-8 LACT8A-500A 8.03˝ (204mm) 14.25˝ 15.25˝ x 3.04˝ x 5.97 13 lbs. $198.755-1679-12 LACT12A-500A 12.04˝ (306mm) 18.26˝ 19.26˝ x 3.04˝ x 5.97 17 lbs. $203.205-1679-18 LACT18A-500A 18.07˝ (460mm) 28.96˝ 29.96˝ x 3.04˝ x 5.97˝ 16 lbs. $219.955-1679-24 LACT24A-500A 24.1˝ (630mm) 34.97˝ 35.97˝ x 3.04˝ x 5.97˝ 18 lbs. $224.45

1000 lb. Linear ActuatorsRetracted.

ITEM Model Stroke Lgth. Size Shpg. Price5-1680-4 LACT4-1000B 3.31˝ (84mm) 12.03˝ 13.03˝ x 3.04˝ x 5.97˝ 9 lbs. $259.055-1680-6 LACT6-1000B 5.31˝ (135mm) 14.17˝ 15.17˝ x 3.04˝ x 5.97˝ 11 lbs. $261.305-1680-8 LACT8-1000B 7.32˝ (186mm) 16.03˝ 17.03˝ x 3.04˝ x 5.97˝ 13 lbs. $263.505-1680-12 LACT12-1000B 11.34˝ (288mm) 20.04˝ 21.04˝ x 3.04˝ x 5.97˝ 17 lbs. $270.205-1680-18 LACT18-1000B 18.07˝ (459mm) 28.96˝ 29.96˝ x 3.04˝ x 5.97˝ 23 lbs. $292.555-1680-24 LACT24-1000B 24.10˝ (612mm) 34.97˝ 35.97˝ x 3.04˝ x 5.97˝ 20 lbs. $303.70

SPECIFICATIONS FOR 500 lb.• Push/Pull: Dynamic 500 lbs. max.• Extension speed: No load 0.71 in/sec; Max. 0.51 in/sec• Duty 25% • Amps• Enclosure IP54 no load 2, full load 24• Pin holes ½˝ • Shaft dia. 1⅛˝

SPECIFICATIONS FOR 1000 lb.• Push/Pull: Dynamic 1000 lbs. max.• Extension speed: No load 0.98 in/sec; Max. 0.55 in/sec• Duty 25% • Pin holes ½˝• Enclosure IP54 • Shaft dia. 1⅛˝

Mounting BracketKitITEM 5-1577-B$16.15• Brand new mounting bracket kit for usewith 5-1577 series and 5-1845 actuators.Sold individually, order 2 kits per actuator.Shpg. ¼ lb.

ControllerKit

ITEM 5-1577-C$56.95• Brand new controller kit for use with our5-1577 series linear actuators. Pushbut-tons give manual control of travel and canbe programmed to move actuator to anyof three operator determined preset posi-tions. Shpg. 1 lb.

Dual Linear ActuatorController KitITEM 5-1577-C-2 $90.95• Brand new controller kit for use with twoof our 5-1577 series linear actuators.Shpg. 1 lb.

800-488-3407 Linear Actuators 165&

24 VDC, 6˝ Stroke

ITEM 5-1784 $36.99• New, VistaMounts nominal stroke linearactuators. Permanent magnet motor. Built-in Hall sensor allows for use with position-sensing circuits. Non-adjustable limitswitches at end of stroke both directions.SPECIFICATIONS• Model 15040319 • Retracted lgth. 18.9˝• Stroke nominal 6˝ • Mounts clevis each end• Push/pull 665 lbs. max. ⅜˝ between ears,• Voltage 24 DC 13/16˝ outside• Amps 0.5 no load Pin holes 5/16˝• Duty intermittent • Size 20¼˝ x 3˝ x 6½˝• Avg. extension speed 0.3 /̋sec. • Shpg. 7 lbs.

12 VDC Right SideWindow ActuatorITEM 5-1707-R$19.95• New, gearmotor / linear ac-tuator assembly. Origi nally builtto raise and lower car win-dows. Consists of a gearmo-tor, plastic pulleys, steel cableand a steel frame with a plasticslider. Right side. No limit switches orclutch, motor stalls at end of travel both di-rections.SPECIFICATIONS • Right side• Travel 11⅞˝ • Reversible• Voltage 12 VDC • Speed 11⅞˝ in 2.5 sec.• Amperage at no load

No Load 3.5 Amps • Size 16˝ x 7¾˝ x 2¾˝Stall 13.5 Amps • Shpg. 4 lbs.

12 VDC, 5.9˝ StrokeLinear Actuators

ITEM 5-1822$84.95• New, CREATIVEWERKS Model CWLAC -T6 light duty linear actuator. Metal housingis IP65 water resistant and sealed againstdust. Permanent magnet motor. Non-ad-justable limit switches at end of strokeboth directions.SPECIFICATIONS• Stroke 150 mm (5.90˝)• Voltage 12 DC • Duty 20%• Push/pull ratings • Operational temp. range

Dynamic 110 lbs. max -14° F to +149° FStatic 500 lbs. max • Enclosure IP65

• Extension speed • Pin holes ¼˝No load 0.59 in/sec • Retracted lgth.Max. load 0.39 in/sec 256.6 mm (10.102˝)

• Amps • Shaft dia. 20 mm (0.787˝)No load 0.6 • Size 10¾˝ x 1⅝˝ x 3⅛˝Full load 3.4 • Shpg. 5 lbs.

ITEM 5-1822-A $89.95• Same as ITEM 5-1822 above exceptbuilt-in potentiometer allows for use withposition-sensing circuits.SPECIFICATIONS• Model CWLACT6P • Retracted lgth.• Size 12¼˝ x 1⅝˝ x 3⅛˝ 297 mm (11.69˝)

12 VDC, 5.9˝ StrokeLinear Actuator

ITEM 5-1833$129.95• New, DUFF NORTON Model LT225-1-150 light duty linear actuator. Metal hous-ing is water resistant and sealed againstdust. Permanent magnet motor. Non-ad-justable limit switches at end of strokeboth directions.SPECIFICATIONS• Stroke 150 mm (5.9˝) • Duty 25%• Voltage 12 DC • Enclosure IP66• Load rating 225 lbs. max. • Pin holes ¼˝ dia.• Extension speed • Retracted lgth. 10˝

No load 8 mm/sec • Shaft dia. 20 mm (0.787˝)Max load 6 mm/sec • Size 10¾˝ x 1½˝ x 3˝

• Amps 3.25 Full load • Shpg. 3 lbs.

12 VDC Linear Actuators

ITEM 5-1761-R ITEM 5-1762-L

$14.95 each• New, linear actuator originally made foruse in electric automotive seats. No clutchor limit switches. Permanent magnet typemotor. Traveling nut has ⅞˝ wrench flats.Output is when viewed from motor endwith output shaft above motor centerline.SPECIFICATIONS• Voltage 12 VDC • Duty intermittent• Amps 1.5 no load • Mount ¼˝ clevis,• Travel 2¼˝ ⅜˝ between ears• Extension time • Shaft 7/16˝-8 ACME thread

6 seconds full travel w/M6x1 LH at end• Rotation reversible • Overall size 6˝ x 2½˝ x 5½˝• Fully enclosed • Shpg. 3 lbs.

ITEM 5-1762-R Right hand outputITEM 5-1762-L Left hand output• Same as ITEM 5-1761-R with auxiliarysocket for ⅛˝ cable drive out rear of motor.

ITEM 5-1761-R Right hand outputITEM 5-1761-L Left hand output

9 VDCMuffin Fan

ITEM 16-1047$5.99

• New ROTRON. Supplied with housing todirect airflow through fan and turn 90°through 1½˝ x 4½˝ outlet. Ideal for movingair through cabinets with restricted access.Operates on 9 VDC, 0.6 amps. Approx. 90CFM airflow. 5 blades, 4¼˝ diam. Size 5˝ x3⅛˝ x 5˝. Shpg. 2 lbs.

12 VDC VariableSpeed Fanwith Heatsink

ITEM 16-1330$8.95• New DELTA AFB0912VH. 3¾˝ diam. x 1˝variable speed brushless processor fanwith heatsink. Heatsink has aluminum finouter body with copper core that dissi-pates heat at a faster rate. Fan speed canbe controlled externally by pulse widthmodulator, by internal controls of the CPUor a constant 12 VDC for constant speed.Four spring loaded bolts that maintainconstant contact mount on 4˝ diam. BC.SPECIFICATIONS • 45 dB-A max.• Rated 12 VDC • Fan 7 blade 3⅜˝ dia. x 1˝• Range 7 - 13.8 VDC • Heatsink 3⅝˝ O.D. x 1½˝• Amps 0.6 • Copper core diam. 1.4˝• CFM 67.8 max. • Shpg. 3 lbs.

Stepper MotorDriven LowFlow Blower

ITEM 16-1450$24.95• Unused, blower assembly from a CPAPbreathing machine. NOT FOR MEDICALREPLACEMENT PURPOSES. Heavy alu-minum housing with isolation to controlsound. Performance and motor specifica-tion are unknown.SPECIFICATIONS• Motor stepper (8 leads) • Outlet ¾˝ OD tubing• Duty continuous • Size 7½˝ x 8˝ x 3½˝• Inlet ¾˝ OD tubing • Shpg. 5 lbs.

24 VDC, 5620 lbs. LinearActuator

ITEM 5-1842 $189.95• NEW TAKE-OFF, SolFocus P/N 350-000266-000 screw jack linear actuator.Original application for elevation adjustmenton large solar panels. Features include fe-male trunnion mount on gearbox, swiveleye rod end, ACME thread style screw, 2⅜˝metal square tube screw cover, mountingholes on screw cover to install plunger stylelimit switches, expanding billow screwcover and permanent magnet TENV gear-motor. Rated for 24 volts but will operate on12 volts at reduced speed and output.Ships in two boxes, requires re-assembly.SPECIFICATIONS• Stroke 52⅝˝• Voltage 24 VDC• Force 25kN (5620 lbs)• Extension speed no load 7⅜ in/min• Gear ratio 25 input shaft revolutions per 1˝ of stroke• Duty intermittent• Trunnion mount pin size ⅞˝ dia. female by 1˝ deep• Rod end pin size ⅞˝• Size 75¾˝ x 5⅛˝ x 19⅝˝• Shpg. 90 lbs.



12 VDC DraftInduction

BlowerITEM 16-1390$19.99

• New, draft induction blower. Ideal for useon corn or wood stoves, furnaces andother general purpose air movement.Metal housing and blower wheel.SPECIFICATIONS • Duty continuous• Voltage 12 DC • Mount 5 hole flange• Amperage 0.8 Amps • Inlet 5˝ diam.• Power 8 Watts • Outlet 19/16˝ x 111/16˝• Speed 2000 RPM • Size 9¾˝ x 7⅞˝ x 5⅛˝• Noise 74 dB • Shpg. 6 lbs.

437 CFM, 12 VDCCentrifugalBlower

ITEM 16-1512$49.95• New, SPAL USA Model 004-A41-28Scentrifugal blower. Three speed resistorboard mounted on housing for low,medium and high speed operation. Plastichousing and blower wheel.SPECIFICATIONS • Max. static press. 2.8˝ H2O• Flow max. speed • Duty continuous

437 CFM at 0˝ H2O • Mount 4 hole flange301 CFM at 1.2˝ H2O 4.69˝ x 2.95˝

• Voltage 12 DC • Inlet 5½˝• Amperage • Outlet 3½˝ x 4˝

22.5 amps at 437 CFM • Size 9˝ x 6¼˝ x 10⅝˝18 amps at 301 CFM • Shpg. 8 lbs.

24 VDCMotorizedImpellorITEM 16-1482$7.99• New MCCLEAN COOLING ModelDB400-2420S6. Backward curved motor-ized impellor. Use for cabinet cooling, airfiltration systems. Air is discharged in 360°pattern around impellor. Narrow profile andvertical or horizontal mount to save space.Plastic construction. Quiet operation withhigh airflow.SPECIFICATIONS• Flow 115 CFM • Speed 5900 RPM (max).• Voltage 24 VDC • Inlet 23/4˝ dia.• Amps 1.4 • Outlet 360° / perimeter• Mounting flange triangular• Size 4˝ dia. x 2˝

with hole in each corner • Shpg. 2 lbs.

166 DC Blowers www.surpluscenter.com8

38 CFM,10 VDC

ITEM 16-1505$5.95• New, SONY Model SFF22C fan. Brush-less design with lubricated ball bearing.Flat mounting on back side. 3 thru holesfor mounting.SPECIFICATIONS• Flow 38 CFM max. • Outlet 1⅜˝ x 1½˝• Voltage 10 DC • Blower wheel 3˝ dia. x 1⅛˝• Amperage 0.51 Amps • Size 4˝ x 4˝ x 1½˝• Inlet 2⅜˝ dia. • Shpg. 1 lb.

32 CFM,12 VDC

ITEM 16-1456$8.95• New, EBMPAPST Model RG90-18/12N.Fiberglass reinforced plastic with steelmounting brackets. Max. temp. 135° F.SPECIFICATIONS • Noise 55 db• Flow 32 CFM max. • Duty continuous• Static pressure 0.1˝ H2O • Inlet 3.15˝ dia.• Voltage 12 DC • Outlet 1¼˝ x 2⅞˝• Amperage 580 mA • Size 5.3˝ x 5.3˝ x 1.5˝• Power 6 watts • Shpg. 2 lbs.

32 CFM,12 VDC

ITEM 16-1455$8.95• New, 12 volt fan. Model 12032HB-TE.Quiet operation. Flat mounting on backside. Three thru holes for mounting withbrass inserts.SPECIFICATIONS • Inlet 3˝ dia.• Flow 32 CFM max. • Outlet 1⅛˝ x 2¼˝• Voltage 12 DC • Blower wheel• Amperage 0.62 Amps 120mm x 32mm• Power 7.5 watts • Size 4¾˝ x 4¾˝ x 1¼˝• Speed 2400 RPM • Shpg. 1 lb.

12 VDCJet AirBlower

ITEM 16-986 $6.99• New HUPP. High efficiency, oscillatinggrille, adjustable bracket for vertical or hor-izontal mounts. High impact plastic.Comes with cigarette lighter plug, powercord, mount ing hardware and instructions.SPECIFICATIONS• 12 VDC • Blower wheel• 1.2 amp 2½˝ x 4¾˝• Grill intake 4½˝ x 3˝ • Size 3½˝ diam. x 10˝• Discharge 1⅛˝ x 4½˝ • Shpg. 4 lbs.200 CFM,

12 VDCBlower

ITEM 16-1257$29.95• New WELLINGTON ELECTRIC Co. Model5012203. Squirrel cage blower. Plastic hous-ing with metal blower wheel. Housing isopen on intake side, requires addition of acover with inlet opening (not included).SPECIFICATIONS • Blower wheel• CFM 200 5½˝ diam. x 2¼˝• Voltage 12 DC • Outlet 3⅜˝ x 3˝• Amps 9 • Mnt. 6 bolt on open side• RPM 3500 • Size 9˝ x 6˝ x 8½˝• Duty continuous • Shpg. 8 lbs.

415 CFM,53 VDC

ITEM 16-1258$24.95• New FLOWMAX. Brushless DC blower thatcan be speed controlled for variable outputflow. Black enamel finished steel housingwith galvanized blower wheel. Variable speedcontrol with separate input voltage from 0 to10 volts DC. Single wire output signal for usewith tachometer for speed indication. 24 voltDC minimum operating voltage.SPECIFICATIONS• CFM 415 • Dual inlet 4½˝ diam.• Voltage 53 DC • Discharge• Amps 4 amps 9˝ x 2⅝˝ with flange• Speed control voltage • Blower wheel

0 - 10 volts DC 5¾˝ diam. x 7˝0 VDC = 50% max speed • RPM 2350 max.5 VDC = 75% max speed • Size 8¼˝ x 10⅜˝ x 8⅞˝10 VDC = 100% max speed • Shpg. 16 lbs.

12 VDC LiquidCoolingSystem

ITEM 16-1361 $39.95• New, SANYO DENKI SAN ACE MCModel 109-LC1-003 CPU-cooler. Liquidcooling system built for removing heatfrom high performance computer CPU’s.Consists of an aluminum, fan-cooled radi-ator, a small coolant pump and a coppercold plate. Mount the cold plate to a warmsurface to remove heat from the surface.Fan speed can be controlled based ontemperature.SPECIFICATIONS • Liquid coolant• Voltage 12 DC Propylene glycol solution• Amperage • Two bolt mount

Fan 0.30 Amps 183 mm (7.20˝) ctrs.Pump 0.13 Amps • Overall size 3⅛ ̋x 7 ̋x 7⅞˝

• Radiator area 6⅜˝ x 4⅝˝ • Cold-Plate 43 x 55 x 15 mm• Thermal resistance (1.69˝ x 2.17˝ x 0.59˝)

0.22 K/W at max fan RPM • Shpg. 5 lbs.

230 CFM, 12 VDCCentrifugal

Blower

ITEM 16-1510$59.95

• New, YOURWAY ELECTRONICS ModelHYT605012MB centrifugal blower. Manu-facturer part number RP-2036. Ideal foruse on corn or wood stoves and othergeneral purpose air movement. Metalhousing and blower wheel.SPECIFICATIONS • Mount 4 hole flange• Flow 230 CFM 41/16˝ x 17/16˝• Voltage 12 DC • Inlet 4¾˝• Amperage 2.1 amps • Outlet 3˝ x 3¼˝• Speed 1500 RPM • Size 8½˝ x 8¼˝ x 6˝• Duty continuous • Shpg. 6 lbs.

12 VDC Cab FanITEM 16-1503$19.99• Brand new, two speedcab fan. Metal mountingbase with swivel ball jointto position air flow. Tog-gle switch for low/off/high. Alu-minum fan blades with chromed steelshroud. Two wire installation.SPECIFICATIONS• Voltage 12 DC • Mount 3 hole pattern• Amperage 0.6/0.9 Amps 23/16˝ B.C.• Blade dia. 6¼˝ • Size 7¼˝ x 4¼˝ x 8¾˝• Number of blades 4 • Shpg. 3 lbs.

1680 CFM,12 VDCFan

ITEM 16-1514$49.95• New, SPAL USA Model VA101-AP70/VLL-36S fan. Plastic housing andblower wheel. Very long life, waterproofmotor. Pusher design draws air over motortoward fan blades for discharge.SPECIFICATIONS• Air flow • Mounts

1680 CFM at 0˝ H2O 4 hole flange on800 CFM at 0.8˝ H2O 337mm bolt circle

• Voltage 12 DC 4 hooks on flange• Amperage 340mm bolt circle

13.9 amps at 1680 CFM • Blade count 5˝17.0 amps at 800 CFM • Blade dia. 12˝

• Max. static press. 1.4˝ H2O • Size 14˝ dia. x 3½˝• Duty continuous • Shpg. 8 lbs.

800-488-3407 DC Fans 167&

12 or 24 VDCHeavy DutyCab Fans

Two SpeedMetal Blades

• Brand new, SER-VICEMATE two speed

cab fans. Metal mount-ing base with swivel ball jointto position air flow. Toggle

switch for low/off/high. Aluminum fanblades with chromed steel shroud. Singlewire installation (ground thru base).SPECIFICATIONS FOR BOTH• Blade dia. 6¼˝ • Mount four hole• Number of blades 4 pattern 1¾˝ x 1˝• Size 7¼˝ x 5˝ x 8¾˝ • Shpg. 5 lbs.

ITEM 16-1458-12 $49.35• Model SM3012, 12 VDC, 1.6/2.6 amps.

ITEM 16-1458-24 $56.55• Model SM3024, 24 VDC, 0.8/1.3 amps.

12 VDC Fans

• New, axial fans. Provide airflow at very low sound levels. Lowpower consumption. Easy to mount with holes in each corner.

ITEM CFM Mfg. Watts RPM Mount # Blades Size Shpg. Price16-1507 17 NMB 1 3600 5˝ square 5 2.36˝ x 2.36˝ x 1˝ ¼ lb. $1.8916-1131 20 JMC 1.44 2500 2.81˝ square 7 3.15˝ x 3.15˝ x 1˝ ½ lb. $5.9916-1508 22 Globe 2.04 1.97˝ square 5 2.36˝ x 2.36˝ x 1˝ ¼ lb. $2.4916-1399 23 NMB 3.24 4900 1.97˝ square 7 2.36˝ x 2.36˝ x 0.98˝ ¼ lb. $2.9916-1334 52 AVC 3.25˝ square 7 3.62˝ x 3.62˝ x 1˝ ½ lb. $2.9916-1445 102 Sanyo 6.25 2600 4.12˝ ctrs. 7 4.75˝ x 4.75˝ x 1.25˝ 1 lb. $4.9916-1466 108 Sunon 5.4 3100 4.12˝ square 7 4.75˝ x 4.75˝ x 1˝ 1 lb. $4.95

684 CFM, 24 VDC DualCentrifugalBlower

ITEM 16-1511$39.95• New, SPAL USA Model 006-B45-22 dualcentrifugal blower. Three speed resistorboard mounted on motor for low, mediumand high speed operation. Plastic housingand blower wheels.SPECIFICATIONS • Max. static press. 2.8˝ H2O• Flow max. speed • Duty continuous

684 CFM at 0˝ H2O • Mount 4 hole flange490 CFM at 1.2˝ H2O around outlets 4.63˝ x 1.76˝

• Voltage 24 DC • Inlets 3˝• Amperage • Outlets 4⅛˝ x 25/16˝

12.7 amps at 684 CFM • Size 5½˝ x 1313/16˝ x 69/16˝9.9 amps at 490 CFM • Shpg. 8 lbs.

130 CFM,24 VDCFanITEM 16-1513$19.95• New, SPAL USA Model VA32-B101-62Afan. Plastic housing and blower wheel. Wa-terproof motor. Puller design draws air thrufan blades for discharge past motor.SPECIFICATIONS • Max. static press. 1˝ H2O• Air flow • Duty continuous

130 CFM at 0˝ H2O • Mount 4 hole flange35 CFM at 0.6˝ H2O 82mm x 82mm

• Voltage 24 DC • Blade count 5˝• Amperage • Blade dia. 3¾˝

1.5 amps at 130 CFM • Size 5˝ dia. x 2⅛˝1.6 amps at 35 CFM • Shpg. 2 lbs.

112 CFM,12 VDCFanITEM 16-1515$19.95• New, SPAL USA Model VA32-A100-62Sfan. Plastic housing and blower wheel. Wa-terproof motor. Pusher design draws airover motor toward fan blades for dis-charge.SPECIFICATIONS • Max. static press. 0.5˝ H2O• Air flow • Duty continuous

112 CFM at 0˝ H2O • Mount 4 hole flange30 CFM at 0.3˝ H2O 82mm x 82mm

• Voltage 12 DC • Blade count 5˝• Amperage • Blade dia. 3¾˝

1.8 amps at 112 CFM • Size 5˝ dia. x 2⅛˝1.7 amps at 30 CFM • Shpg. 2 lbs.

ITEM CFM Mfg. Watts RPM # Blades dBa Bearing Size Shpg. Price16-1522 9.5 GDT 1.2 6000 9 27 Sleeve 40mm x 40mm x 10mm ¼ lb. $2.9916-1524 11.4 Delta 1.8 5500 7 35 Ball 50mm x 50mm x 10mm ¼ lb. $2.9916-1525 11.9 Protechnic 2.3 5800 9 34.6 Rifle 50mm x 50mm x 10mm ¼ lb. $2.9916-1527 50 Delta 10.44 7 55 Ball 60mm x 60mm x 25mm ¼ lb. $3.4916-1517 52 MassCool 3 1500 7 25 Sleeve 120mm x 120mm x 25mm ½ lb. $4.9916-1529 52 AVC 3.6 7 34 Sleeve 92mm x 92mm x 25mm ½ lb. $3.9916-1519 98.6 CoolMa x 9.6 3000 7 43.3 Ball 120mm x 120mm x 25mm ½ lb. $4.9916-1518 108 Sunon 5.4 3100 7 44.5 Vapo 120mm x 120mm x 25mm ½ lb. $4.9916-1528 109 Nidec 20.7 8500 7 60 Ball 80mm x 80mm x 38mm ½ lb. $3.9916-1531 110 SanAce 13.2 5000 7 50 Ball 92mm x 92mm x 38mm ½ lb. $3.9916-1520 151 Delta 19.2 3700 7 53 Ball 120mm x 120mm x 38mm 1 lb. $4.9916-1532 220 Nidec 39.6 5300 9 64.8 Ball 120mm x 120mm x 38mm 1 lb. $4.99

750 CFM, 3 HPCentrifugalBlower

ITEM 16-1504$349.95• New, custom built high pressure weldedsteel centrifugal blower. Powered by 3 HP3 phase Techtop TEFC inverter duty ratedmotor with 15:1 constant torque factor.SPECIFICATIONS• Flow 750 CFM • Duty continuous• Static pressure 7.5˝ • Mount 4 tabs 15.56 ̋x 20.69˝• Voltage 230 AC 3 Phase • Inlet 8˝ dia.• Amperage 7.6 Amps • Outlet 8¾˝ x 5˝• Power 3 HP • Size 27˝ x 19½˝ x 19˝• Speed 3510 RPM • Shpg. 210 lbs.

Truck freight only.

168 AC Blowers & Fans www.surpluscenter.com8

Vacuum Motor Blowers

• New Panasonic vacuum motor. Applications include replacingmotors in canister vacuums, utility vacuums, dust collection sys-tems, etc. Intermittent duty. For dry, clean air installations only. Aircirculates thru motor. Brush style motor. Performance based uponorifice restriction of equipment to inlet of vacuum motor.

AC Voltage Axial Fans

• New, axial fans provide very quiet airflow. Circulate air or cool elec-tronic components. Easy to mount.

ITEM CFM Mfg. Voltage Watts RPM Mount # Blades Size Shpg. Price16-1439 85 Thermocool 115 VAC 25 2600 4.12˝ square 5 4.75˝ x 4.75˝ x 1.5˝ 2 lbs. $ 9.3516-1440 122 Thermocool 120 VAC 25 2600 4.43˝ square 5 5.31˝ x 5.31˝ x 1.5˝ 2 lbs. $10.9516-1367 198 Thermocool 120 VAC 38 2900 4.81˝ square 5 5.9˝ x 5.9˝ x 2˝ 2 lbs. $16.95

Motorized Impellers

• New. Backward curved motorized impeller. Use for cabi-net cooling, air filtration systems. Air is discharged in 360°pattern around impellor. Narrow profile and vertical or hor-izontal mount to save space. Quiet operation with high air-flow. Mounting flange four tapped holes on motor. Requiresrun capacitor, not included.

Plastic Steel Aluminum

CapacitorITEM Mfg. Model CFM Voltage Amps RPM Inlet Construction Required Size Shpg. Price

16-1475 Fans-Tech FH133 115 230 VAC 0.14 3100 3¾˝ Plastic 1 MFD 450 VAC 5¼˝ dia.x 3¾˝ 4 lbs. $ 9.9916-1467 Fans-Tech FH133 115 115 VAC 0.25 3000 3¾˝ Plastic 2.5 MFD 250 VAC 5¼˝ dia.x 3¾˝ 4 lbs. $ 9.9916-1477 Fans-Tech FH175 235 230 VAC 0.21 2800 5˝ Plastic 1.5 MFD 450 VAC 7˝ dia. x 2½˝ 4 lbs. $14.9916-1468 Fans-Tech FH175 235 115 VAC 0.4 2800 5˝ Plastic 4MFD 250 VAC 7˝ dia. x 2½˝ 4 lbs. $14.9916-1459 Fans-Tech FH133 260 115 0.22 3000 3⅛˝ dia. Plastic 2.5 MFD 250 VAC 5¼˝ dia. x 3¾˝ 3 lbs. $ 9.9916-1478 EBM-Papst R2E175 280 230 VAC 0.35 2300 5˝ Steel 1.5 MFD 400 VAC 6¾˝ dia. x 2¼˝ 5 lbs. $14.9916-1476 EBM-Papst R2E190 365 230 VAC 0.38 2300 5⅛˝ Plastic/Steel 2 MFD 400 VAC 7½˝ dia. 2½˝ 5 lbs. $14.9916-1501 EBM-Papst R2E225 710 230 VAC 0.93 2880 6˝ Plastic 5 MFD 400 VAC 9˝ dia. x 5˝ 10 lbs. $14.9916-1470 Fans-Tech FJ225 735 115 VAC 1.7 3050 6˝ Plastic 20 MFD 250 VAC 9˝ dia. x 4˝ 8 lbs. $14.9916-1460 Fans-Tech FH250 850 115 2.6 3000 7˝ dia. Plastic 25 MFD 250 VAC 10˝ dia. x 3⅜˝ 10 lbs. $ 9.9916-1479 Fans-Tech FH280 910 230 VAC 1.06 2500 7⅜˝ Steel 8 MFD 450 VAC 11˝ dia. x 3¼˝ 10 lbs. $18.9916-1472 Fans-Tech FH280 910 115 VAC 3.26 2490 7⅜˝ Steel 20 MFD 250 VAC 11˝ dia. x 3¼˝ 10 lbs. $18.9916-1471 Fans-Tech FH250 975 115 VAC 2.6 3000 7˝ Plastic/Steel 25MFD 250 VAC 10˝ dia. x 3¾˝ 9 lbs. $14.9916-1462 Fans-Tech FH280 1000 230 1.06 2500 9½˝ dia. Steel 8 MFD 450 VAC 11˝ dia. x 3⅜˝ 11 lbs. $12.9916-1480 Fans-Tech FH320 1175 230 VAC 0.75 1580 8½˝ Steel 4 MFD 450 VAC 12½˝ dia. x 6˝ 14 lbs. $24.9916-1474 Fans-Tech FH355 1530 115 VAC 2.4 1550 9¾˝ Aluminum 20 MFD 250 VAC 14˝ dia. x 6½˝ 16 lbs. $29.9916-1481 Fans-Tech FH3355 1530 230 VAC 1.15 1600 9¾˝ Aluminum 6 MFD 450 VAC 14˝ dia. x 6½˝ 15 lbs. $29.99

120 VACITEM 16-1446 $16.95SPECIFICATIONS • Voltage 120 VAC• Model UDS751CNDUB • Current 6.8 amps• Design thru-flow • Intake 1.3˝• Air flow 77 CFM (max.) • Size 5˝ dia. x 4˝• Vacuum 80˝ Water (max.) • Shpg 5 lbs.

Air Flow-Vacuum Performance DataOrifice Watts Vacuum Air Flow Efficiency(mm) (In. H20) (CFM) (%)40 770 5.6 77 6.930 755 15.6 71 17.616 677 57 38 39.110 578 70 16.8 24.3

None (Blocked) 479 80 0 0

240 VACITEM 16-1448 $14.95SPECIFICATIONS • Voltage 240 VAC• Model UDS754CNDNA • Current 3.3 amps• Design thru-flow • Intake 1.25˝• Air flow 81 CFM (max.) • Size 5˝ dia. x 4˝• Vacuum 80˝ water (max.) • Shpg 5 lbs.

Air Flow-Vacuum Performance DataOrifice Watts Vacuum Air Flow Efficiency(inches) (In. H20) (CFM) (%)

2 745 2.9 89 4.211.5 735 7.6 80 9.971 720 24.6 64 26.2¾ 690 42.4 47 34.8

None (Blocked) 724 77 0 0

470 CFM, 2 Speed115 VACAxialFan

ITEM 16-1502$47.95• New, EBM-PAPST Model W1G200-EC95-11. Two speed axial fan. Ball bear-ings. Discharge thru motor struts. 11˝power cord with 3 pin plug. Max tempera-ture 120F. Plastic construction.SPECIFICATIONS • Mount 6 holes on 9.29˝ B.C.• Flow 290/470 CFM max. • Blade dia. 200mm (7.87˝)• Voltage 115 AC • Number of blades 5• Amperage 0.46 Amps • Size 9⅞˝ dia. x 3˝• Speed 1500/2100 RPM • Shpg 4 lbs.

800-488-3407 AC Fans & Miscellaneous 169&

Baseboard Heaters

• New. Brands may vary (Raywall, Markel).Permanent mount baseboard electricheater. Ideal as primary or auxiliary heatsource. Mount on exterior wall of room. Usewith external thermostat (not included).Thermal overload protection. Can be wiredfrom either end. UL listed. Size 7˝ high x 2½˝deep.

ITEM Voltage Length Watts Color Shpg. Price 11-2560-3 240/208 AC 3 feet 750/562 Tan 12 lbs. $9.99 11-3335-3-T 240/208 AC 3 feet 750/562 Tan 12 lbs. $9.99 11-3337-40-T 240/208 AC 40 inches 750/550 Tan 13 lbs. $7.99 11-3338-40-T 240/208 AC 40 inches 750/563 Tan 13 lbs. $7.99 11-2560-5 240/208 AC 5 feet 1250/950 Tan 22 lbs. $16.99 11-3337-6-T 240/208 AC 6 feet 1500/1150 Tan 24 lbs. $19.99 11-3338-6-W 240/208 AC 6 feet 1500/1150 White 24 lbs. $19.99 11-3340-6-W 120 AC 6 feet 1500 White 24 lbs. $19.99 11-2560-7 * 240/208 AC 7 feet 1750/1300 Tan 31 lbs. $21.99 11-2560-10 ** 240/208 AC 10 feet 2500/1875 Tan 26 lbs. $35.99* Ships over-size UPS. ** Ships over-size truck freight only.

18/3 PowerCords

• New, 3 conductor UL listed black powercords. SJT smooth jacket. Three prongmale plug. Shpg. ½ lb.

ITEM 11-3400 $1.49• Length 36˝ with stripped ends

ITEM 11-3401 59¢• Length Black 6½˝ with 3/16˝ spade connector• Length White 11˝ to 18½˝ with ¼˝ spade connector• Length Green 9˝ with ¼˝ ring connector

ITEM 11-3401-A 59¢• Length Black 14½˝ with ¼˝ female spade connector• Length White 11½˝ with ¼˝ female spade connector• Length Green 9˝ with ¼˝ ring connector115˝ 18/3 Hospital Grade

Line Cord

ITEM 11-3350$3.99• New, hospital grade line cord. Clearmolded end with green dot.SPECIFICATIONS• Conductor gauge 18 • Conductor count 3• Length 115˝ • Jacketing type SJT• End 1 NEMA 5-15P• End 2 ROJ (remove outer jacket) and stripped• Shpg. 1 lb.

18/2 PowerCords$1.99 each• New, two conductor power cord. SPTjacket. Use for lamps, clocks, etc.SPECIFICATIONS • Two prong male plug• 18 gauge conductors • Shpg. ¼ lb.

ITEM 11-3369-A White, 9 ft. long

ITEM 11-3369-B Brown, 12 ft. long

ITEM 11-3369-C Brown, 9 ft. long

Extension Cord SplitterWith Locks

ITEM 11-3457$9.95• New, E-ZEELOCK. Converts extensioncords from single to dual outlets. Uniquecord lock to prevent cords pulling awayfrom all 3 connectors.SPECIFICATIONS • Length 2 Ft.• Wire size 14/3 STW • Shpg. 1½ lbs.

RV/Mobile HomeAdapter

ITEM 11-3225$3.95• New, Electricord (Leviton) Model C-1427-009-BL. Male end plugs into 30 amp 125Voutlet and converts to standard 15 amp fe-male.SPECIFICATIONS • Jacketing type STW• Conductor gauge 12 • End 1: 30 Amp 125 V male• Conductor count 3 • End 2: 15 Amp 125 V female• Length 9˝ • Shpg. 1 lb.

198 CFM, 120 VAC Fans

16-1365 16-1366

• Brand new, Thermocool axial fan. Highairflow and low noise for cooling electricalequipment or general air circulation. Metalhousing with plastic blades. 59db rating.SPECIFICATIONS FOR ALL• Flow 198 CFM max. • Speed 2900 RPM• Voltage 120 AC • Blade dia. 5½˝• Amperage 0.4 Amps • Number of blades 5• Power 38 Watts • Shpg. 2 lbs.

ITEM 16-1365 $16.95SPECIFICATIONS• Model G17050HASB • Ball bearings• Mnt. 4 holes on 6⅜˝ b.c. • Size 6¾˝ dia. x 2˝

ITEM 16-1366 $16.95SPECIFICATIONS• Model G17050 • Ball bearings• Mount 4 holes • Size 6.75˝ x 5.9˝ x 2˝

50 ft. 16/3 MaroonExtensionCordITEM 11-3487$8.95• New, maroon jacketed extension cord.SPECIFICATIONS • Color Maroon• Length 50 ft. • Jacket SJTW• Conductors 16/3 • Shpg. 5 lbs.

8 ft. 12/3 PowerCord

ITEM 11-3489$8.99• New. Black power cord. Blank end hasjacket stripped 2˝/conductors stripped1½˝.SPECIFICATIONS• Length 8 ft. • Color Black• Conductors 12/3 • Jacket STOW• Plug NEMA 5-15P • Shpg. 2½ lbs.

109 CFM,115 VACFanITEM 16-1516$8.95• Used, JAPAN SERVO Silent Fan ModelSCNA2B5. Aluminum alloy housing withfinger guards on both sides. 42 db.SPECIFICATIONS• Flow 109 CFM max. • Mount 4 holes 4⅛˝ sq.• Voltage 115 AC • Blade dia. 4¼˝• Amperage 0.17 Amps • Number of blades 5• Power 13 Watts • Size 4¾˝ x 4¾˝ x 1½˝• Speed 3300 RPM • Shpg. 2 lbs.

DC MotorReversingContactors• Brand new, SPAL re-versing polarity contactor.Ideal for controlling per-manent magnet motors. Both out-put terminals rest at ground for dynamicbraking in de-energized state. Splash re-sistant body with O-ring seals. Silver-plated contacts.SPECIFICATIONS • 20% max duty cycle• Contact ratings • Coil terminals ¼˝ spade

5-30 VDC • Motor & battery terminals100 amps max duty cycle 6mm studs

• 6 min. at max. cont. output • Size 2⅛˝ x 33/16˝ x 3¼˝• Two hole mount 2¾˝ ctrs. • Shpg. 1 lb.

ITEM 11-3169-12 $38.55• Coil ratings 12 VDC nominal, 15 VDC max. 7 ohms

ITEM 11-3169-24 $36.95• Coil ratings 24 VDC nominal, 30 VDC max. 26.8 ohms

36 VDC,4PDTITEM 11-2384$7.99• New take-offs WESTCODE. 36 volt DCrelay with base.SPECIFICATIONS• Contacts 4PDT • Ohms 295• 25 amp capacity • Size 3˝ x 2˝ x 3˝• Coil 36 volt DC • Shpg. 2 lbs.

SPDT Relayw/Base

ITEM 11-3222$3.95

• New. Ideal for auxiliarylights, motors. Includesbase socket with 11˝leads.

SPECIFICATIONS • Amp rating• Coil voltage 12 volt DC 30 break, 40 make• Contacts SPDT • Size 1˝ x 1˝ x 1¾˝• Mounting single hole • Shpg. ½ lb.

Inline FusesWith Holder

$1.89 each• New BUSS AMI series inline fuse withholder. Use for general purpose circuit pro-tection on mobile equipment.SPECIFICATIONS • Size 9/16˝ x 1¾˝ x ½˝• Voltage 32 Volt DC • Shpg. ¼ lb. lb.

ITEM 11-3438-30 30 Amp ratingITEM 11-3438-70 70 Amp ratingITEM 11-3438-100 100 Amp rating

170 DC Relays & Contactors www.surpluscenter.com8

24 VDC,3PDT

ITEM 11-1195$3.85• Used. Coil 55 ohms. 10 amp at 125 VAC,5 amp at 240 VAC. Clear plastic dust proofcase w/slotted flange mount. Tiny lampacross the coil lights up when relay ener-gizes. Removable diode shunt across relaycoil. Size 1⅞˝ x 1½˝ x 1½˝. Shpg. ¼ lb.

12 VDC, 70 AmpWaterproof RelayPack

ITEM 11-3411$19.95• New, STIRLING TECHNOLOGIES Part#DN13911. Original equipment for control-ling a hydraulic slide-out system on mo-torhomes. Includes fuse on positive controllead. 3 studs for motor connections.SPECIFICATIONS • Contacts 2 independent• Coil voltage 12 volt DC normally open• Contact rating 70 amps • Size 5½˝ x 1½˝ x 3¾˝• Mount 2 holes, 4¾˝ c/c • Shpg. 1 lb.

12 VDC, 160 AmpReversingContactor

ITEM 11-3421$32.95• New, high current, reversing contactorideal for use with reversible direct currentmotors. Sealed plastic housing.SPECIFICATIONS• Coil voltage 12 VDC• Contact rating 160 amps at 12 VDC• Duty 5 minutes max at 160 Amps output• Mount 4 bolts on 1¼˝ x 315/16˝ centers• Stud terminals M6-1.0• Size 4½˝ x 2˝ x 2⅝˝• Shpg. 2 lbs.

12 VDC, N.O.RelayITEM 11-1525$1.95• New. General purpose relays. Openframe.Coil rated 12 VDC, coil resistance120 ohms. Shpg. ½ lb.

12 VDC SPDTRelay

ITEM 11-3076$2.39• New. 12 volt DC 43 ohm coil. Normallyopen 5 amp contacts. Grounds thrumounting bracket. Push on terminals. Size1½˝ x 1⅛˝ x ⅞˝. Shpg. ¼ lb.

12 VDC StarterRelay

ITEM 11-1108$5.95• Brand new. 12 VDC starter solenoid. Op-erating coil connects to hot side batteryterminal. Grounded through case. Coil 6ohm. Size 2¼˝ x 2⅛˝ x 2⅛˝. Shpg. 1 lb.

12 VDC MotorReversingContactorITEM 11-3149$41.95• Brand new TROMBETTA Model 214-1231-A11 reversing polarity contactor.Ideal for controlling permanent magnetmotors. Dynamic braking in de-energizedstate. Sealed plastic housing.SPECIFICATIONS• 12 VDC coil • 20% max duty cycle• Contact ratings • Coil terminals ¼ spade

12 VDC nominal, 15 VDC max • Motor & battery75 amps for 5 min. max terminals 5/16˝-24 studs125 amps for 30 sec. • 2 bolt mount on 4⅛˝ ctrs.150 amps in-rush • Size 5˝ x 3⅜˝ x 3˝

• 5 min. max ON time • Shpg. 1 lb.

ITEM 11-3149-COVER $6.80• Plastic cover for ITEM 11-3149 above. 2hole mount. Shpg. 1/10 lb.

12 VDCHornRelayITEM 11-2276$2.99• New. Automotive type single pole nor-mally open 12 volt DC relay. Rated toswitch 11 amps. 90 ohm coil. Groundedframe with plastic dust/moisture cover.Use for horns, lights, etc. Screw terminals.Size 2⅛˝ x 1⅛˝ x 1¾˝. Shpg. ½ lb.

12 VDC RFMotorReversingContactor

ITEM 11-3169-12-RF $67.95• Brand new, SPAL reversing polarity con-tactor. Ideal for controlling permanentmagnet motors. Integrated RF allows for50 foot unobstructed range at 433 Mhz.Both output terminals rest at ground fordynamic braking in de-energized state.IP65 rated. Silver-plated contacts. 6 buttonRF transmitter included.SPECIFICATIONS• Coil ratings • Contact ratings

12 VDC 5-30 VDC7.1-8.9 Ohms 100 Amps at max duty cycle

6 min. at max continuous output• 20% max duty cycle • Motor & battery• Max. current terminals 6mm studs

350 amps Inrush • 2 hole mount on 2¾˝ ctrs.• Coil terminals • Size 2⅛˝ x 33/16˝ x 3¼˝¼˝ spade • Shpg. 2 lbs.

12 VDCSPSTRelayITEM 11-3427$2.49• New. OPTRONICS A-715 relay. Ideal forauxiliary lights, motors. Plastic enclosure.SPECIFICATIONS• Coil voltage 12 volt DC • Mounting single hole• Contacts SPST • Terminals ¼˝ spade

(Normally open) • Size 1˝ x 1˝ x 1˝• Contact ratings 40 Amps • Shpg. ¼ lb.

12 VDCContactor

ITEM 11-1722$13.49• New, GOULD. 3 pole, 12 VDC contactor.Two poles are normally open, third pole is dou-ble throw. 13 ohm coil. Heavy duty 20 ampcontacts. Size 2˝ x 2½˝ x 3½˝. Shpg. 2 lbs.

12 VDC Cont. DutyInsulatedSolenoid

ITEM 11-3290$18.95• Brand new, TROMBETTA Part #1306317solenoid. Environ men tally sealed plastichousing for demanding environmentalconditions. Copper contacts. ReplacesWestern® part number 56131K-1.SPECIFICATIONS • Duty continuous• Voltage 12 DC • Coil resistance 13.5 ohms• Current ratings • Main terminals 5/16˝-24

150 Amps cont. carry • Center terminal 10-32250 Amps break • Size 4˝ x 2½˝ x 2⅝˝800 Amps in-rush • Shpg. 2 lbs.

800-488-3407 DC & AC Relays & Contactors 171&

SteelElectricalEnclosure

ITEM 1-4703$39.95• New, white steel electrical enclosure.Vertical wall mount. Hinged door with gas-ket. Two louvered vents, inlet has mesh fil-ter and outlet has 4⅛˝ square hole patternto mount exhaust fan (not included). Hascut out for digital display and keypad cov-ered with decal (no circuitry). Four mount-ing tabs.SPECIFICATIONS • Mtg. pattern 14˝ x 21½˝• Size exterior 20˝ x 8˝ x 20˝ • Actual weight 32 lbs.• Size interior 19˝ x 6½˝ x 19˝ • Shpg. 55 lbs. (oversize)

SPSTKeyswitch

ITEM 11-3347$2.99• New, WOLO MFG. On/Off keyswitch.Key can be removed in either position. Fur-nished with 2 flat keys.SPECIFICATIONS• Switch type key • Switch positions two• Contacts SPST • Mounting ¾˝ hole• Action maintained • Mounting depth 1⅞˝• Spade terminals • Shpg. ¼ lb.

12 VDC Int. DutySolenoids

• Brand new, BUYERS PRODUCTS sole-noid. Plastic housing.SPECIFICATIONS • Coil resistance 3.2 Ohms• Voltage 12 DC • Main terminals 5/16˝-24• Current rating • Center terminal 10-32

100 Amps at 12 VDC • Size 2½˝ x 3½˝ x 3˝• Duty intermittent • Shpg. 1½ lbs.

ITEM 11-3292 $7.10• Part #1306300. Insulated, apply groundto center terminal to activate. Ideal re-placement for use on snowplows, replacesWestern® #25634.

ITEM 11-3300 $7.10• Part #1306070. Case grounded, applypositive 12 VDC to center terminal to acti-vate. Ideal replacement for use on snow-plows, replaces Western® #15370.

12 VDC Cont. DutySolenoids

• Brand new, BUYERS PRODUCTS sole-noid. Plated steel housing.SPECIFICATIONS• Voltage 12 DC • Coil resistance 16.3 Ohms• Current ratings: • Main terminals 5/16˝-24

80 Amps cont., • Center terminal 10-32150 Amps in-rush • Size 2¾˝ x 3½˝ x 2⅝˝

• Duty continuous • Shpg. 2 lbs.

ITEM 11-3277 $11.95• #1306510. Case grounded, apply posi-tive 12 VDC to center terminal to activate.

ITEM 11-3278 $11.95• #1306505. Insulated housing, applyground to center terminal to activate.

Westinghouse Circuit Breakers• New, Westinghouse Quicklag, plug-in,single pole circuit breakers.SPECIFICATIONS FOR ALL• Thermal magnetic • Suitable for 60° C wire• Plug on clip line terminal • Size 29/16˝ x 1˝ x 215/16˝• Box lug load terminal • Shpg. ½ lbs.

ITEM Model VAC Amps Interrupting Rating Price 11-2909 HQP1030 120/240 30 10,000 amp at 120/240 VAC $ .99 11-3000 HQP1040 120/240 40 10,000 amp at 120/240 VAC $ .99 11-2907 QPHW1030 120/240 30 22,000 amp at 120/240 VAC $ .99 11-2911 QPHW1030 120/240 30 22,000 amp at 120/240 VAC $ .99 11-2998 QPHW1040 120/240 40 22,000 amp at 120/240 VAC $ .99 11-2912 QPHW1050 240 50 22,000 amp at 240 VAC $ .99 11-2999 QPHW1060 120/240 60 22,000 amp at 120/240 VAC $ .99 11-2906 QPHW1060 120/240 60 10,000 amp at 120/240 VAC $ .99

New Low Price!

99¢ Each

SPDT Keyswitch

ITEM 11-3360 $3.99• New, SPDT keyswitch. Key can be re-moved in either position. Furnished with 1round key.SPECIFICATIONS • Spade terminals• Switch type key • Switch positions two• Contacts SPDT • Mounting ¾˝ hole• Current 3 amps, 250 VAC • Mounting depth 1⅜˝• Action maintained • Shpg. ¼ lb.

SteelElectricalEnclosure

ITEM 1-4956$59.95• Unused takeouts, BEL PRODUCTSModel S201606. 16 gauge steel electricalenclosure. Gray textured powder coat fin-ish on inside and outside. Vertical wallmount. Removable hinged door with gas-ket. 3 quarter turn latches with gasket cov-ers. Two pairs of mounting holes on topand bottom.SPECIFICATIONS• Ratings NEMA

4-4x-12/IP-65 • Mtg. holes 7/16˝ dia., 3˝ c/c• Standoffs for panel • Size exterior 20˝ x 16˝ x 6˝

11½˝ x 12½˝ • Shpg. 29 lbs.24 VACContactors

• New, ZETTLER magnetic contactors. Usefor control circuits with 24 Volt AC power.SPECIFICATIONS• Coil voltage 24 VAC• Contact ratings: • Terminals dual push-on

25 amps inductive • Mount 4 holes 1⅝˝ x 1⅝˝30 amps resistive • Size 3½˝ x 2˝ x 2½˝

• 240/277-480 Volts • Shpg. 1 lb.

ITEM 11-3442 $9.95• Model XMCK-302024C. 2PST N.O.

ITEM 11-3441 $6.95• Model XMCK-302024C. 1PST N.O.

172 Power Supplies, Counters & Timers www.surpluscenter.com8

115 VACPull Solenoid

ITEM 11-3407$9.95

• New, NAMCO Model EB600-20333 pullsolenoid. Continuous duty.SPECIFICATIONS• Voltage 115 AC • Clevis 1˝ wide,• Max pull ½˝ ⅜˝ between ears• Force 8 lbs. • Mount 4 holes• Clevis pin hole 3/16˝ dia. • Size 2¼˝ x 2⅛˝ x 2˝• Terminals 4 ft. leads • Shpg. 1 lb.

7 Digit115 VACCounter

ITEM 21-1281 $4.79• SODECO. Reads to 9,999,999. Non-reset. Operates on 115 VAC. Draws 3½watts. Panel mount in 1½˝ x 1˝ cutout.White numerals on black face. Overall size1⅝˝ x 2⅜˝ x 1⅛˝. Shpg. ½ lb.

AdjustableTimer Switch

ITEM 137-B$1.90• Used HAYDEN. Operates on 208 volt AC.Consists of standard 5 watt, 4 RPM syn-chronous clock motor operating a SPDT 15amp microswitch. Complete timing cycleon longest setting is 13.5 seconds. A di-vide-by-tenths dial permits setting desiredtime. Size 3½˝ x 2½˝ x 2½˝. Shpg. 1½ lbs.

12 VDC 4 DigitCounterITEM 21-1727$4.99• New. LINE SEIKI Model MCU-4Scounter. Not resettable. May be conti-nously energized. Counts 1 digit for eachon/off cycle of power.SPECIFICATIONS • Power consumption 2 watts• Voltage 12 VDC • Mount 2 M3 holes on back• Digits 4 • Size 1¼˝ x 2¼˝ x 1˝• Max. 10 cycles per second • Shpg. ½ lb.

115:12 VAC, 1.5 AmpTransformer

ITEM 15-1135$6.95• New, BOSTON ACOUSTICS Class 11Model DK1201A5-1AN power supply withinput and output cords.SPECIFICATIONS• Input 120 VAC • Output cord 6 ft.• Output 12 VAC w/5.5mm barrel plug• Output 1.5 amps • Size 2¼˝ x 1⅞˝ x 3½˝• Input cord 7½ ft. • Shpg. 3 lbs.

0-10 Minute,115 VACTimerITEM 1-1614$4.99• New. 115 VAC motor timer. Knob adjust-ment for 0-10 minute “ON” time. Contactsrated to switch 5 amps, 115 VAC. Timermotor draws 3 watts. Size 2⅝˝ x 2˝ x 2⅝˝.Shpg. 1 lb.

2 Digit NumericDisplay

ITEM 11-3223 $11.95• New 2 digit numeric display with powersupply and pushbutton switch. Display ad-vances one count each time button ispushed. Other types of actuators such asmicroswitches could also be used. Non-re-settable (must cycle thru full range to returnto zero). Power supply plugs into 115 VACoutlet and delivers 7.5 VDC to circuit.SPECIFICATIONS• Display range 0-99 • Size 5˝ x 4⅛˝• Digit size 1⅝˝ x 2¾˝ (display panel)• LED’s per digit 21 • Shpg. 2 lbs.

5 DigitCounter

ITEM 1-3835$6.95• New, 5 digit counter. White 3/16˝ digits onblack background. Pushbutton reset. Doesnot include trip arm. All steel case.SPECIFICATIONS • Rotation approx. 60°• Digits 5 • Mount 4 holes 1⅛˝ x 1⅜˝• Resettable • Size 2⅝˝ x 1⅞˝ x 1¾˝• Shaft 4mm dia. x ⅜˝ • Shpg. ½ lb.

Electromechanical 60 min.,115 VACTimer

ITEM 11-3324$3.99

• New MALLORY, electromechanical timer.Originally made for use in battery chargers.Turning shaft starts timer. Knob not in-cluded.SPECIFICATIONS • Contact rating• Max. on time 60 minutes 15 amp 125/250 VAC• Motor voltage 115 VAC • Size 2˝ dia. x 1⅝˝• Mount ⅜-32 • Shpg. 1 lb.

24 VDC 6 DigitCounter

ITEM 11-2523$5.95

• New, DURANT 6-Y-41712. White numer-als on black background.SPECIFICATIONS• 999,999 readout • Size 19/16˝ x 1⅝˝ x 1˝• Non-resettable • Shpg. ½ lb.

CountdownTimerITEM 29-N-013$2.99• New, M.H. RHODES spring woundcountdown timers. Save energy by auto-matically turning lights or equipment off.Knob not included.SPECIFICATIONS • Screw terminals• 5 minute timer • Action spring wound• Contacts SPST • Shaft 3/16˝ diam. w/flats• Contact ratings • Face size 25/16˝ diam.

25 Amps at 120-240 VAC • Mtg. ⅜˝-24 x ⅜˝⅓ HP max. threaded neck240 VAC max. • Mounting depth 15/16˝

• Switch type rotary • Shpg. 1½ lbs.

Plug In Power Supplies

• New, direct plug in power supplies.All types are 115 Volt AC input. Indoor use only.

ITEM Brand/Model Output Current Termination Size Shpg. Price15-1085 Motorola/SPN4203A 12 VDC 800 ma 6mm plug 2¾˝ x 2⅜˝ x 2˝ 1½ lbs. $4.9915-1180 Fellowes/PS12-4-TI 12 VDC 1 Amp 70˝ 2˝ x 2⅛˝ x 3⅜˝ 1½ lbs. $5.9911-1796 Dazey/DTS-01 12 VDC 600 ma 5.5mm plug 2˝ x 1¾˝ x 2¼˝ 1 lb. $9.9915-1179 FP/D57-12-1700 12 VDC 1.7 Amp 5.5mm plug 2¼˝ x 2½˝ x 3⅝˝ 3 lbs. $8.4915-1178 SSA-0321-00 12 VDC 850 ma Lighter plug 2½˝ x 2¼˝ x 3½˝ 1½ lbs. $3.4911-3343 Diamond/35-6-550D 6 VDC 500 ma Alligator clips 1¾˝ x 1⅜˝ x 2⅛˝ 1 lb. $3.95

24 VDC 5 DigitCounter

ITEM 21-1728$4.99• New. LINE SEIKI Model MCH-5P counter.Resettable. May be continuously energizedfor less than 5 minutes max. Counts 1 digitfor each on/off cycle of power.SPECIFICATIONS• Voltage 24 VDC • Power consumption• Digits 5 2.8 watts• Max rate 15 cycles per sec. • Size 1⅞˝ x 3½˝ x 1⅝˝• Mount panel • Shpg. ½ lb.

Handheld Two ButtonPendantSwitch

ITEM 11-2201$17.35• Brand new. For power-up, gravity downpowerpacks. Ideal for remote control ofsingle acting hydraulic power units, etc.Weatherproof plastic housing.SPECIFICATIONS• Pushbuttons 2 Normally open • Cord 18/3 14 ft. long• Contact rating 5 amp 250 VAC • Shpg. 3 lbs.

3PST RotarySwitch

ITEM 11-1906$9.99

• New, ELECTROSWITCH. 3 sets of con-tacts rated 10 amps, 120 VAC. Handlesnaps to 4 different positions. All contactsopen in two positions, closed in other two.Mount through panel with ¼˝ opening. Size2¾˝ x 2¼˝ x 3¾˝. Shpg. 1 lb.

SPST N.O. Heavy DutyMomentarySwitch

ITEM 11-3296$16.05• Brand new, BUYERS BSW002 heavyduty flange mount momentary pushbuttonswitch. Heavy duty spring.SPECIFICATIONS• Termination • Face size 2⅛˝ x 27/16˝5/16˝-24 stud terminals • Mounting two holes

• Switch positions two on 1¾˝ centers• Mounting depth 17/16˝ • Shpg. ½ lb.

SPST MomentaryPushbuttonStarter SwitchITEM 11-3428 $3.99• New, panel mount momentary push but-ton starter switch. Ideal for many automo-tive and other DC electrical circuits.Weather and dust proof housing with rub-ber cover.SPECIFICATIONS• Contacts SPST • Action momentary

(normally open) • Switch positions two• Contact rating • Face size 11/16˝ diam.

60 amps at 12 VDC • Mtg. stem ⅝˝ x 21/32˝ long• Switch type pushbutton • Size 1⅛˝ dia. x 1½˝• Screw terminals • Shpg. ¼ lb.

800-488-3407 Specialty Switches 173&

SPST 10 AmpToggleSwitchw/ Recessed Pan

ITEM 11-3298$7.30• Brand new, BUYERS Model SW911 tog-gle switch recessed in a pan. Recessedpan prevents accidental activation and pro-tects switch from impacts. 20 gauge platedsteel pan. Mounts in 2˝ diameter hole, with3 holes on 2⅝˝ diameter bolt circle.SPECIFICATIONS• Contacts SPST • Action maintained• Contact ratings • Switch positions two

10 Amps at 12 VDC • Face size 33/16˝ dia.12 VDC max. • Mounting flange

• Switch type toggle • Mounting depth 2˝• Spade terminals • Shpg. ¼ lb.

SPST MomentaryPushbuttonSwitch

ITEM 11-3293$5.10• Brand new, BUYERS BSW90030 panelmount momentary normally open pushbut-ton switch. Weather and dust proof hous-ing. Originally intended for vehicle uses.SPECIFICATIONS • Action momentary• Contacts SPST • Switch positions two• Contact ratings • Face size 15/16˝ diam.

35 amps at 12 VDC • Mtg. stem ⅝˝-32 x 21/32˝• Switch type pushbutton • Mounting depth 1¾˝• Srew terminals • Shpg. ¼ lb.

12 VDC Heavy DutyDisconnectSwitch

ITEM 11-3294$17.95• Brand new, BUYERS Model SW700heavy duty master disconnect switch.SPECIFICATIONS • Screw terminals• Contacts SPST • Action maintained• Contact ratings: • Switch positions two

20 Amps at 12 VDC cont. • Face size 2½˝ diam.125 Amps at 12 VDC int. • Mounting panel ¾˝-1615 sec. ON & 5 min. OFF • Mounting depth 215/16˝

• Switch type rotary • Shpg. 1 lb.

12 VDC Heavy DutyReversingSwitch

ITEM 11-3295$16.95• Brand new, BUYERS PRODUCTS Part #SW710 reversing switch. Heavy-duty 50Amp rotary switch controls forward and re-verse motion of a 12-volt motor without re-quiring a relay. Ideal for use with 12 VDClinear actuators, gearmotors and otherpermanent magnet motors. Commonlyused on 12-volt truck and trailer tarp sys-tems. Three positions: momentary-ON,OFF, momentary-ON. Terminal hardwareincluded.SPECIFICATIONS • Action momentary• Contacts DPDT-CO • Switch positions ON-OFF-ON• Contact rating • Face size 2˝ dia.

50 Amps at 12 VDC • Mounting ½˝ hole• Switch type rotary reversing• Mounting depth 1⅞˝• Four screw terminals • Shpg. 2 lbs.

Waterproof 12 VDCBatteryIsolatorSwitchITEM 11-3299 $8.95• Brand new, BUYERS PRODUCTS CO.Part # 6391200 battery isolator key-switch.Excellent for marine or automotive use.Circuit closes when key is locked in place.Waterproof plastic housing with water-re-sistant rubber cover. Removable twist-lockplastic key.SPECIFICATIONS• Contacts SPST • Action maintained• Contact ratings at 12 VDC • Switch positions two

100 Amps cont. • Face size 211/32˝ dia.500 Amps max surge • Mounting four 3/16˝ holes

• Switch type rotary isolator• Mounting depth 1½˝• Termination two ⅜˝-16 studs • Shpg. ½ lb.

Reversing Drum Switches• Brand new, drum type reversing switches. Heavy dutycopper contacts, painted metal housing. UL and CSAlisted. Available for single or three phase operation andmomentary or maintained operation.

Horsepower Ratings1 Phase Volts 3 Phase Volts

ITEM Action 115 230 230 460 Size Shpg Price11-3390 Maintained 1.5 2 — — 2.5˝ x 4˝ x 4.5˝ 2 lbs. $48.9511-3390-M Momentary 1.5 2 — — 2-5˝ x 4˝ x 4.5˝ 2 lbs. $53.9511-3391 Maintained 1.5 2 2 1 2.5˝ x 4˝ x 4.5˝ 2 lbs. $59.9511-3391-M Momentary 1.5 2 2 1 2.5˝ x 4˝ x 4.5˝ 2 lbs. $61.9511-3392 Maintained 2 3 5 7.5 3.5˝ x 6.2˝ x 5.6˝ 4 lbs. $127.95

Four PositionIgnitionKeyswitch

ITEM 11-3429$6.99• New, four position ACC/OFF/RUN/ -START keyswitch. Heavy duty die-castconstruction with 10-32 threaded terminalstuds. Power to ignition terminal in RUNposition style. Key can be removed in OFFposition only. Furnished with 4 flat keys.SPECIFICATIONS • Stud terminals• Switch type key • Switch positions four• Contacts • Mounting ¾˝ hole

ACC/OFF/START/RUN • Mounting depth 2¾˝• Action maintained • Size 1¾˝ diameter x 4˝

with momentary start • Shpg. ½ lb.

174 Toggle Switches & Accessories www.surpluscenter.com8

Switch & HarnessAssemblyITEM 11-2289

$5.95• New, McGILL. One SPST ON/OFF toggleswitch, rated 6 amps at 125 volt AC. OneDPST ON/OFF toggle switch, rated 15amps at 125 volt AC. Two momentarySPNO pushbutton switches, rated 15amps at 125 volt AC. Installs in ½˝ hole.Shpg. ½ lb.

3 Hole SwitchMountingPanelITEM 11-3323 99¢• New, black plastic mounting panel for 3switches. Could also be used for indicatorlights. Angles slightly upward whenmounted to flat surface. Self tappingscrews included.SPECIFICATIONS• Hole count 3 • Size 3¾˝ x 1½˝• Hole dia. ½˝ • Shpg. ¼ lb.

Spring-LoadedSwitch CoversYour Choice

$1.75 each• Brand new. Spring-loaded switch coversfor two-position, on-off switches to preventaccidental actuation. For switches with ½˝dia. stems. Available in 9 colors (see itemnumber suffix). Shpg. 1/10 lb. each.ITEM 11-3260-BLACK ITEM 11-3260-BLUEITEM 11-3260-CARBON ITEM 11-3260-CHROMEITEM 11-3260-CLEAR ITEM 11-3260-GREENITEM 11-3260-PURPLE ITEM 11-3260-RED

ITEM 11-3260-YELLOW

Toggle Switches• Brand new toggle switches. Includes legend plate.Screw terminals. Contact ratings 20 Amps at 125VAC, 15 Amps at 250 VAC. Shpg. ¼ lb.

ITEM 11-3217 SPST Maintained $2.20ITEM 11-3218 SPDT-CO Maintained $2.75ITEM 11-3456 SPDT-CO Momentary $3.05ITEM 11-3219 DPST Maintained $3.20ITEM 11-3220 DPDT-CO Maintained $3.55ITEM 11-3259 DPDT-CO Momentary $4.40ITEM 11-3279 DPDT-CO Momentary/Maintained $4.404PDT-CO Toggle Switch

ITEM 11-3221 $5.70• Brand new, maintained toggle switch. Includes leg-end plate. Screw terminals. Contact ratings 15 Ampsat 125 VAC, 10 Amps at 250 VAC. Shpg. ½ lb.

SPNC 16 Amp Paddle SwitchITEM 11-3115 95¢• New, SPNC momentary paddle switch. 16 ampsat 125 VAC, 10 amps at 250 VAC, 3/4 HP at 125-250 VAC. ¼˝ spade terminals. Shpg. 1/10 lb.

DPDT Toggle Switch

ITEM 11-3417 $2.99• New SCI. DPDT maintained switch. 16 amps at277 volt AC. 1 HP at 277 volt AC. Two switch posi-tions. Spade terminals. Shpg. ¼ lb.

DPST 15 Amp Paddle Switch

ITEM 11-3098 $1.49• New, DPST maintained paddle switch. Orangepaddle is ⅝˝ wide by ⅞˝ long. 10 amps at 250 VAC,15 amps at 125 VAC, ¾ HP at 125 VAC. Two holemount 1⅝˝ c/c. ⅛˝ spade terminals. Shpg. 1/10 lb.

SPST Illuminated Toggle Switches• New, CALTERM duckbill lever SPST maintainedaction toggle switches. Contacts 20 Amps at 12VDC. Switch positions 2 (on-off). ¼˝ spade termi-nals. Mounting ½˝ hole. Shpg. 1/10 lb.

ITEM 11-3286-A Amber glow $1.99ITEM 11-3286-G Green glow $1.99SPST Toggle Switch

ITEM 11-3452 $3.99• New, NAPA chrome maintained ON/OFF switch.Metal construction. Jam nut included. Contact rat-ings 35 Amps at 12 VDC. Spade terminals. Twoswitch positions. Mount ½˝ dia. opening. Shpg. ¼ lb.

SPDT-CO Momentary/Maintained Toggle Switch

ITEM 11-3482 $1.99• New, EATON toggle switch with momentary onposition and maintained on position and center offposition. 6 amps at 125 VAC. No jam nut. Spade ter-minals. Shpg. ¼ lb.

SPST Toggle Switch

ITEM 11-3454 $1.99• New, NAPA maintained ON/OFF switch. Metal con-struction. Jam nut included. Contact ratings 15 Ampsat 12 VDC. Spade terminals. Two switch positions.Mount ½˝ dia. opening. Shpg. 1/10 lb.

SPST Toggle Switch

ITEM 11-3287 $1.49• New, CALTERM 40100 black duckbill lever SPSTmaintained toggle switch. 20 Amps at 12 VDC.Switch positions 2 (on-off). ¼˝ spade terminals.Mounting ½˝ hole. Shpg. 1/10 lb.

DPDT-CO Toggle Switch

ITEM 11-3261 $3.00• Brand new, maintained toggle switch. Includes leg-end plate. Screw terminals. Contact ratings 10 Ampsat 125 VAC, 6 Amps at 250 VAC. Shpg. ¼ lb.

SPST ToggleSwitch

with Red Cover

ITEM 11-3450$3.99

• New, SPST maintained toggle switchwith red switch cover. Metal constructionplastic switch cover. Jam nut included.SPECIFICATIONS• Contacts SPST • Action maintained• Contact ratings: • Switch positions two

20 Amps at 12 VDC • Mount ½˝ dia. opening• Switch type toggle • Mounting depth 1⅛˝• Spade terminals • Shpg. 1/10 lb.

Chrome SPST Toggle Switch

ITEM 11-3451 $4.99• New, wide toggle maintained ON/OFFswitch. Metal construction. Jam nut in-cluded. Extra multi-color boots included.SPECIFICATIONS• Contacts SPST • Action maintained• Contact ratings: • Switch positions two

35 Amps at 12 VDC • Mount ½˝ dia. opening• Switch type toggle • Mounting depth 15/16˝• Spade terminals • Shpg. ¼ lb.

Rubber CoversFor ToggleSwitch

• New, rubber covers for lever on toggleswitches. Helps keep moisture and dustout of switch.SPECIFICATIONS • Thread size M12 x 0.75• Size 9/16˝ dia. x 1˝ • Shpg. 1/10 lb.

ITEM 11-3250 With loop $1.10ITEM 11-3250-A Without loop $1.10

Ordering Information & Shipping Rateson pages 102 - 103


800-488-3407 Rocker & Pushbutton Switches 175&SPST Illuminated Rocker Switches• New, CALTERM SPST maintained action rockerswitches. Contacts 16 Amps at 12 VDC. Switch po-sitions 2 (on-off). ¼˝ spade terminals. Mounting ½˝hole. Shpg. 1/10 lb.

ITEM 11-3330-A Amber glow 99¢

ITEM 11-3330-G Green glow 99¢

SPDT Maintained Rocker Switch

ITEM 11-3125 $1.29• New, McGILL SPDT maintained switch. Plasticrocker and housing. 20 amps at 277 VAC, 1½ HP.117/32˝ x 29/32˝ face. Mounts in 115/32˝ x 13/16˝ opening. ¼˝spade terminals. Shpg. 1/10 lb.SPST 16 Amp Rocker Switch

ITEM 11-3206 89¢• New, single pole, single throw maintained rockerswitch. Spade terminals. Contact ratings 16 Ampsat 125 VAC, 12 Amps at 250 VAC. Snaps into ½˝ x11/16˝ opening. Shpg. 1/10 lbs.10 Amp ON/OFF Rocker SwitchITEM 11-2478 $2.79• New ENERPAC. SPST maintained rocker switch.Spade terminals. Mounts in ½˝ x 1⅛˝ opening. Con-tacts rated 10 amps at 125 VAC. Shpg. 1/10 lb.SPST Rocker Switch

ITEM 11-3402 79¢• New. SPST lighted maintained ON/OFF switchwith cover. 15 amps at 125 VAC, 7.5 amps at 250VAC. Spade terminals. Shpg. 1/10 lb.SPST Rocker Switch

ITEM 11-3403 99¢• New. SPST lighted maintained ON/OFF switchwith cover. 15 amps at 125 VAC. Mounting 1.25˝ x0.85˝, depth 1.1˝. Two switch positions. Spade ter-minals. Shpg. ¼ lb.SPST Rocker Switch

ITEM 11-3321 79¢• New, CARLING Model RA901-RB-B-0-N Curvetteseries SPST maintained rocker switch. Contact rat-ings 16/10 Amps at 125/250 VAC, ¾ HP. Termina-tion 0.250˝ spade. Switch positions two. Mtg. hole1.125˝ x 0.550˝. Shpg. 1/10 lb.SPDT-CO Rocker Switch

ITEM 11-3090 $1.75• New SPDT-CO maintained switch. Plastic hous-ing. 16 amps at 250 VAC ¼ HP at 125 VAC. 1¼˝ x11/16˝ face. Mounts in 1⅛˝ x 17/32˝ opening 1˝ deep. ¼˝spade terminals. Shpg. 1/10 lb.DPDT Momentary Rocker SwitchITEM 11-3245 $1.49• New, E-SWITCH type R5 momentary rockerswitch. White plastic housing. ¼˝ spade terminals.Contact ratings 20 Amps at 125 VAC, 16 Amps at250 VAC. Mounting ⅞˝ x 1.18˝. Shpg. 1/10 lb.SPST 15 Amp Rocker SwitchITEM 11-3066 95¢• New, SPST ON/OFF maintained rocker switch.Plastic housing with tabs to hold switch in place.Contact ratings 15 amps at 125 VAC, 7.5 amps at250 VAC. ⅛˝ spade terminals. Shpg. 1/10 lb.DPDT-CO Rocker SwitchITEM 11-2490 $2.95• New. Double pole, double throw, center off main-tained rocker switch. Snaps into ⅞˝ x 1˝ opening.Contacts rated 16 amps at 125 VAC, 10 amps at250 VAC. Spade terminals. Shpg. 1/10 lb.

SPDT 16 Amp Rocker Switch w/Cover

ITEM 11-3153 99¢• New SPDT switch. Plastic housing, clear flexibleplastic cover over rocker. ¼˝ spade terminals. 16amps at 250 VAC, ½ HP at 125 VAC. 1 HP at 250VAC. 17/16˝ x 11/16˝ face. Mounts in 1⅛˝ x 17/32˝ opening1˝ deep. Shpg. 1/10 lb.SPDT-CO 15 Amp Rocker Switch

ITEM 11-2477 $1.95• New CARLING. SPDT-CO maintained rockerswitch. 10 amps at 250 VAC, 15 amps at 125 VAC,¾ HP at 125-250 VAC. Snaps into 17/16˝ x 13/16˝ rec-tangular opening. Three spade terminals on rear ofswitch. Shpg. 1/10 lb.ON/OFF PushbuttonITEM 11-2108 $1.99• New OSLO CONTROLS. Momen tary pushbutton.Rated 125 volt AC, 10 amps. Snaps into ⅞˝ x 13/16˝hole. Shpg. ¼ lb.SPST ON/OFF PushbuttonITEM 11-2450 $1.49• Snap action, ⅜˝ single hole mount. 6 amp at 125VAC, 3 amp at 250 VAC. Fine replacement switchfor motor driven tools, lamps, etc. 6˝ wire leads. Size1¼˝ x ⅞˝ x ¾˝. Shpg. ½ lb.SPST N.O. 12 VDC 15 Amp Pushbutton Switch

ITEM 11-3187 $2.49• New, CALTERM Model 42210 SPST N.O. momen-tary push-button switch. Plastic and metal con-struction. Jam nut included. 15 amps at 12 VDC.Mounts in ⅝˝ dia. opening. Shpg. ¼ lb.SPST N.O. 12 VDC Pushbutton Switch

ITEM 11-3297 $6.55• Brand new, BUYERS SW901 panel mount mo-mentary pushbutton switch. Moisture repellent in-sulator. Screw terminals. Two switch positions. Facesize 7/16˝ diam. Mtg. stem ⅝˝-32 x ¾˝. Shpg. ¼ lb.SPST N.O. 12 VDC 15 Amp Pushbutton Switch

ITEM 11-3449 $3.99• New brass momentary pushbutton switch. Rubberboot switch cover. Jam nut included. Contact rat-ings 15 Amps at 12 VDC. Spade terminals. Switchpositions two. Face size 15/16˝ dia. Mount ⅝˝ dia.opening. Shpg. ¼ lb.SPST N.O. Pushbutton SwitchITEM 11-3064 99¢• New, SPST N.O. momentary push-button switch.Plastic and metal construction. Jam nut included. 6amps at 120 VAC, 3 amps at 240 VAC. Mounts in½˝ dia. opening. Shpg. 1/10 lb.2 Button ON/OFF SwitchITEM 11-2397 $1.49• New, maintained, 2 button ON/OFF switch. Rated16 amps, ⅓ HP at 125 volt AC; ½ HP at 250 voltAC. Mounts in 1¼˝ x ½˝ hole. Size 1¼˝ x 1⅜˝ x 9/16˝.Shpg. ¼ lb.Three Position Rotary SwitchITEM 11-3227 $2.99• Three position maintained switch rotates 180°. Con-tact rating 25 Amps at 120-240 VAC. Connections:Position 1 Off, Position 2 L1 to 1 & 2, Position 3 L1 to1 & 5. Spade terminals. Face size 2˝ x 1⅝˝. Mtg. 2tapped #6-32 holes on ¾˝ centers. Shpg. ¼ lb.

12 VDC WirelessRemoteControls

• New. Wireless remote control receiver/ -transmitter combination. All circuits havecommon input. Each circuit is controlled sep-arately from the buttons on the remote trans-mitters. Contacts close and remain closed foras long as the button on the transmitter is de-pressed. Code learning feature on receiverfor easy programming (no DIP switches orcircuit board traces to cut). Receiver has re-mote 3½˝ antenna on 9 ft. cable for greaterrange than similar units with internal antenna.Requires battery as power source.SPECIFICATIONS FOR BOTH• 12 VDC • 2 bolt base mount 3¾˝ ctrs.• Contacts rated1 amp max. • Size 4⅛˝ x 2½˝ x 1¼˝ • Shpg. 2 lbs.

Dual ChannelITEM 11-2495 $50.95• Two SPNO contacts. Includes two key-ring style, 2-pushbutton transmitters andinstructions.Three ChannelITEM 11-2495-3 $53.95• Two SPNO circuits, one SPDT circuit. In-cludes two key-ring style, 3-pushbuttontransmitters and instructions.

IEC StandardC14 ACPower InletITEM 11-332079¢• New, snap-in power inlet connector forchassis mount applications. Black thermo-plastic construction. Accepts standardC13 plug.SPECIFICATIONS• Conductors 3 • Connector type C14• Rating 10/15A at 250 VAC • Termination 0.250˝• Panel quick connect

cutout size 1.062˝ x 0.807˝ • Size 1⅛˝ x 1¼˝ x 15/16˝thickness 0.031˝ to 0.078˝ • Shpg. 1/10 lb.

12 Volt DC ReversingWirelessRemoteControl

ITEM 11-3395$73.95• Brand new. Wireless remote control to re-verse polarity to equipment. Ideal for linearactuators or other permanent magnet mo-tors. Waterproof receiver. Remotes have 2buttons to control output. Code learningbutton on receiver with LED indicator. Verylow current draw in standby. Heavy dutyleads. High power radio gives over 150 footrange with a clear line of sight. Includes twokeychain remote transmitters. SPECIFICATIONS • Output current 40 Amp max• Input voltage 12 VDC • Mount 2 tabs• Output 12 VDC • Size 3˝ x 3˝ x 1˝

polarity reversing • Shpg. 3 lbs.

176 Microswitches & Remote Controls www.surpluscenter.com8

MicroswitchPairITEM 11-1346$1.89• New takeoffs. Unique pair of SPDT mi-croswitches with common roller spring ac-tuating arm. Set screw adjustment allowsone switch to be actuated a fraction of asecond before the other. Use to sequenceitems with very small time interval.Mounted on steel bracket.SPECIFICATIONS • Contacts rated• Two SPDT switches 5 amps at 125-250 VAC• Size 3½˝ x 2½˝ x 1˝ • Shpg. ¼ lb.

12 VDC Seven ChannelWireless RemoteControl

ITEM 11-3305 $76.65• Brand new. Wireless remote control re-ceiver/transmitter combination. First 2channels have 30 amp relay outputs.Channels 3-7 are 500 ma output to powerexternal relays (not included). Each circuitis controlled separately from the buttonson the remote keychain transmitter.• Code learning feature on receiver for easyprogramming. DIP switches on receiver toselect activation as long as transmitter but-ton is depressed or momentary pulse forchannels 1, 2, 6 and 7.• Ignition lockout option disables channels1-4 when powered. Switch connections forchannels 1 and 2 allow for manual switch(not included) to activate in addition to re-mote transmitter.• Can be operated from 12 Volt DC powersupply or battery. Only draws 0.15 amps.• Receiver has 14˝ antenna. 100 ft. rangewith clear line of sight. Includes 2 keychainstyle 4-pushbutton transmitters and full in-structions with application examples.SPECIFICATIONS• Voltage 12 VDC • Connections• Channel 1-2 output relay Channel 1-2,• Relay contacts spade terminals

Rating 30 Amp max Channel 3-7 and power,• Relays SPDT 10 pin connector

(common N.O. connection) • Mount two hole, 3⅞˝ c/c• Channels 3-7 • Size 4⅛˝ x 4˝ x 1¼˝

output -500 m.a. • Shpg. 2 lbs.

LED MarkerLightITEM 11-3348-R$4.99• New, GROTE INDUSTRIES Model 47042single LED marker light. Flexible rubbermounting bezel.SPECIFICATIONS • Lens dia. 0.61˝• Voltage 12 DC • Bezel dia. 1.1˝• Color Red • Leads 6˝.• Panel opening ¾˝ • Shpg. ¼ lb.

¼˝ Diam. FuseHolder

ITEM 11-3171$1.95• New, safe touch box style fuse holder. Lidof the fuse holder moves vertically out ofbody, and cradles the fuse. Plastic housing.SPECIFICATIONS • ¼˝ spade terminals• Voltage 250 VAC max. • Mount panel 17/16˝ x 11/16˝• Amps 15 amps max. • Size 1½˝ x ¾˝ x 15/16˝• Fuse size ¼˝ dia. x 1¼˝ • Shpg. ¼ lb.

PlungerLimit

Switch

ITEM 11-3406 $8.99• New, plunger style limit switch. Weatherproof rubber cover on plunger and wiringconnections.SPECIFICATIONS• Contact type • Actuator travel 0.3˝

normally closed • Terminals 15 ft. leads• Contact ratings • Mount ⅝˝ dia. hole

20 amps at 24 VDC • Size 3⅛˝ x 1¼˝ x 1˝• Actuator type plunger • Shpg. ½ lb.

120 VACHourMeterITEM 1-4028$18.95• New, HOBBS Model 20116 120 volt AChourmeter. Non-resettable. Includes ad-justable rear clamp to hold into panel.SPECIFICATIONS • Panel opening• Digits 5 + 1/10 hour 17/16˝ x 15/16˝ hole,• Voltage 120 VAC 2½˝ deep• Amps 0.03 max. • Shpg. ½ lb.

Top Quality Microswitches• For limit switches, burglar alarm systems,etc. Shpg. ¼ lb.

Standard Size MicroswitchesStandard size 1⅞˝ x ¾˝ x ⅝˝.

Pushbutton

A B C

ITEM CONTACTS AMP PRICE

(A) 11-1901 SPNO 15 $ .80(B) 11-2541 SPDT 15 $1.29(C) 11-3388 SPNO 15 $ .99

Lever Type


11-3078-A SPNO 20 $2.29

Subminiature MicroswitchesSubminiature size ¼˝ x ¾˝ x ½˝.

Lever Type


11-3322 SPNO 5 $ .69

800-488-3407 Capacitors & Indicator Lights 177&

125 Volt ⅓Watt IndicatorLightITEM 11-3205$1.29• New, red indicator light with wire leads.Plastic housing 1¼˝ long w/ ½˝ dia. head.SPECIFICATIONS• Voltage 125 AC • Mounting hole ⅜˝ dia.• Power ⅓ watt • Shpg. 1/10 lb.

Motor Start Capacitors• New, round motor start capacitors. Molded phenolic resin hous-ing. Spade terminals. All have capacitance range of +20%/-0%.ITEM MFD MFD Range Voltage Size Shpg. Price

22-1092 43 43-53 125 17/16˝ dia. x 2¾˝ ½ lb. $1.4922-1322 59 59-70 250 113/16˝ dia. x 3⅜˝ ½ lb. $2.9922-1323 86 86-103 250 113/16˝ dia. x 3⅜˝ ½ lb. $2.9922-1324 105 105-126 250 113/16˝ dia. x 3⅜˝ ½ lb. $2.9922-1326 270 270-324 330 29/16˝ dia. x 4⅜˝ 1 lb. $3.99

Motor Run Capacitors• New. Size does not include terminals. Shpg. 1 lb.

ITEM Voltage MFD Shape Size Price22-1300 330 2 Oval 2⅛˝ x 1¼˝ x 19/16˝ $1.9922-1249 370 5 Oval 25/32˝ x 15/16˝ x 2⅝˝ $2.9922-1211 ** 330 9 Oval 1¼˝ x 2˝ x 3⅞˝ $3.6922-1251 330 12.5 Round 1¾˝ diam. x 3˝ $4.2922-1212 370 12.5 Round 1¾˝ d. x 2⅞˝ $4.2922-1328 370 15 Round 1⅜˝ d. x 2¾˝ $3.4922-1256 370 25 Oval 215/16˝ x 115/16˝ x 2⅝˝ $4.9922-1213 370 25 Oval 1¾˝ x 2¾˝ x 3˝ $4.9922-1214 * 330 30 Round 1¾˝ d. x 2⅞˝ $5.2922-1215 370 40 Round 1¾˝ d. x 3⅞˝ $6.2922-1216 370 40 Round 2˝ d. x 3⅞˝ $6.2922-1320 § 600 40 Round 2½˝ d. x 4¾˝ $5.9922-1217 440 45 Round 2˝ d. x 4¼˝ $6.99** Resistor between terminals * Ground lug § M12-1.75 stud mount

Dual Rating Capacitors• New. Size does not include terminals. Shpg. 1 lb.

ITEM Voltage MFD Shape Size Price22-1223 370 20/5 Round 2˝ d. x 2⅞˝ $4.7922-1226 370 25/3 Oval 1¾˝ x 2¾˝ x 3˝ $4.9922-1224 370 25/5 Oval 1¾˝ x 2¾˝ x 3˝ $4.9922-1225 370 25/5 Oval 1¾˝ x 2¾˝ x 4˝ $4.9922-1268 370 25/5 Oval 215/16˝ x 115/16˝ x 2⅝˝ $4.9922-1230 440 30/7.5 Oval 1¾˝ x 2¾˝ x 4˝ $5.2922-1231 440 40/4 Round 2½˝ d. x 3⅛˝ $5.4922-1277 370 40/5 Round 2½˝ diam. x 3˝ $5.4922-1279 440 40/7.5 Oval 321/32˝ x 131/32˝ x 4¾˝ $5.4922-1232 440 40/12.5 Round 2½˝ d. x 3⅞˝ $5.4922-1280 370 45/5 Oval 215/16˝ x 115/16˝ x 3¾˝ $5.6922-1233 370 45/10 Oval 1¾˝ x 2¾˝ x 4˝ $5.6922-1234 440 45/10 Oval 1¾˝ x 2¾˝ x 4⅞˝ $5.69

Capacitors

Used Motor Run Capacitors• Used, removed from equipment. ITEM MFD Voltage Shpg. Price 22-1158 1.25 370 ½ lb. $1.79 22-1094 2 370 ½ lb. $1.99 22-1308 2 440 ½ lb. $1.9922-1160 2.5 370 1 lb. $1.99 22-1159 3.75 370 ½ lb. $1.99 22-1102 4 370 ½ lb. $1.99 22-1099 5 330 1 lb. $2.99 22-1189 6 330 1 lb. $2.49 22-1103 6 370 ½ lb. $2.49 22-1310 7 330 ½ lb. $1.99 22-1131 7 370 ¼ lb. $1.99 22-1311 7.5 330 ½ lb. $1.99 22-1156 7.5 370 1 lb. $2.99 22-1193 8 330 1 lb. $3.19 22-1095 10 370 ½ lb. $2.99 22-1194 12.5 330 1 lbs. $3.29 22-1104 12.5 370 1¼ lbs. $3.29 22-1190 14 240 1 lb. $3.79 22-1105-B 15 236 1½ lbs. $3.99 22-1105-C 15 330 1½ lbs. $3.99 22-1105 15 370 1½ lbs. $3.99 22-1183 15 370 1½ lbs. $3.99 22-1196 15 440 ½ lb. $3.99 22-1192 17.5 330 1 lb. $4.15 22-1122 17.5 370 1 lb. $4.15 22-1197 17.5 440 1 lb. $4.15 22-1142 20 370 1¼ lbs. $3.99 22-1199 20 480 1¼ lbs. $3.99 22-1106 25 370 2 lbs. $4.99 22-1107 30 330 2 lbs. $4.8922-1174 35 236 3 lbs. $8.95 22-1120 88 1200 9 lbs. $14.95

125 Volt IndicatorLightITEM 12-964$1.50• New. 125 volt indicator light. Red lens.Spade terminals.SPECIFICATIONS • Mounting hole ½˝ dia.• 125 volt AC/DC • Overall lgth. 1½˝• ⅓ watt • Shpg. 1/10 lb.

120/240 VAC GeneratorOutletPanel

ITEM 11-3306$8.99

• New, generator panel outlet enclosurebox with hinged cover. Electrical compo-nents are mounted in plastic enclosure de-signed for surface mounting. Twopush-button reset circuit breakers.SPECIFICATIONS• 240/120 Outlet: NEMA L14-30, 30 amp twist-lock• 120 Outlets: 3-prong 20 amp duplex• Circuit breaker rating 20 amps• Panel opening 8˝ x 5⅛˝ • Face size 8½˝ x 6⅛˝• Mtg. studs 3/16˝ dia. • Size 4⅞˝ x 8½˝ x 6⅛˝

c/c 6½˝ x 521/32˝ • Shpg. 4 lbs.

12 Volt IndicatorPanelLights

99¢ each• New, CALTERM indicator panel lights.Plastic housing. Mounts in a ½˝ diameteropening, tabs hold housing in place. Re-movable black bezel.SPECIFICATIONS• Voltage 12 DC • Mounting depth 17/16˝ dia.• Termination ¼˝ spade • Bezel diameter ¾˝ dia.• Mounting hole ½˝ dia. • Shpg. 1/10 lb.

ITEM 11-3289-A Amber illumination

ITEM 11-3289-G Green illumination

New Arrivals Dailywww.surpluscenter.com

8˝ x 2˝ PneumaticScooter Wheel

ITEM 1-4031$6.99• New, KENDA tire on bolt together plasticrim. Made for Zapworld powered scooters.Integral 4½˝ dia. toothed belt pulley. 34mmfine thread mount on hub side oppositepulley.SPECIFICATIONS • Tube type• Size 8˝ x 2˝ • Pulley teeth 72• Tread motorcycle • Pressure 50 PSI max.• Hub 10mm ball bearing hub • Ply rating 4• Hub width 3¾˝ • Shpg. 3 lbs.

178 Wheels & Accessories www.surpluscenter.com8

4.10/3.50-4WheelAssembly

ITEM 1-4932$5.95• New, pneumatic tire mounted on steelrim.SPECIFICATIONS• Size 4.00/3.50-4 • Ball bearing• Outside dia. 10¼˝ • Tube type• Cross section 3¼˝ • Load rating 300 lbs.• Tread Knobby • Pressure 30 PSI max.• Hub ⅝˝ bore x 2˝ wide • Ply rating 2• Hub type offset • Shpg. 5 lbs.

Single Speed Transmission

ITEM 1-2948$14.99

• New, GENERAL TRANSMISSION Model1101619 single speed transmission.Spring loaded clutch arm engages input toaxle shaft. Plastic housing. Originally man-ufactured for self-propelled lawn mowers.Solid axle. Axle has snap ring groove andthru-holes at both ends. Thru-holes are 3/16˝diam. and centered 1⅜˝ from the end ofaxle. Non-reversing.SPECIFICATIONS • Axle lgths. 39/16˝ & 12˝• Gear ratio 6.25:1 • Overall axle lgth. 19⅜˝• Input pulley ⅜˝ belt, • CW input rotation

25/16˝ outside diam. • Size 19⅜˝ x 4¾˝ x 4⅞˝• Axle diam. ½˝ • Shpg. 4 lbs.

1˝ Trailer Spindle

ITEM 1-1128 $7.25• Brand new steel trailer spindle with cas-tle nut. 1˝ diam. x 8½˝ long. Shpg. 4 lbs.

Coil-over Shock AbsorberAssembly

ITEM 28-1720 $8.95• New, coil-over shock absorber assem-blies. Ideal for go-carts, mini bikes, utilityvehicles and other equipment. Five-wayadjustable ride height settings. Chromeplated spring with black painted body.SPECIFICATIONS• Spring rate 110 lbs./inch • Mounting hole ⅜˝• Extended lgth. 12˝ • Mounting hole width 13/16˝• Travel 2˝ • Size 1¾˝ diam. x 13¼˝• Spring size 1¾˝ diam. x 7˝ • Shpg. 3 lbs.

Bolt-OnFolding Step

ITEM 1-3297$6.65

• Brand new. Painted cast steel foldingstep. Stainless steel spring.SPECIFICATIONS• Mount two 5/16˝ holes on • Thickness folded up 15/16˝

3-7/8˝ centers • Size 4⅜˝ x 15/16˝ x 5⅜˝• Step size 2⅛˝ x 4⅜˝ • Shpg. 1½ lbs.

Hi-SpeedWheelHubs

• Brand new. Fits boat and snowmobiletrailers. Includes grease cap, tapered rollerbearings, seal and studs.

ITEM 1-1133 $20.95• Four lug bolt on 4˝ bolt circle. Use with 1˝spindle. Shpg. 7 lbs.

ITEM 1-1134 $24.95• Five lug bolt on 4½˝ bolt circle. Use with1˝ spindle. Shpg. 7 lbs.

18x7.00-8 WheelAssembly

ITEM 1-4686$59.95• New, CARLISLE MULTI-TRAC C/S tire onSCAG orange steel wheel. Not for Hi-wayService. Center pilot hole 2½˝ dia.SPECIFICATIONS • Backspace 3⅛˝• Size 18x7.00-8 • Tubeless• O.D. 18˝ • Load rating 785 lbs. max.• Tread Turf • Pressure 26 PSI max.• Tread width 6˝ • Ply rating 4• Mount 4 bolt on 4˝ B.C. • Shpg. 20 lbs.

13x6.50-6 DriveTurf Tire AndWheel

ITEM 1-4805$17.99• New, KENDA 13x6.50-6 turf tire on steelwheel. Not for Highway Service.SPECIFICATIONS • Mount ¾˝ dia. bore x 5½˝• Size 13x6.0-6 w/ ¼˝ dia. pin hole• O.D. 12½˝ • Pressure 28 PSI Max.• Tread turf • Ply rating 4• Tread width 5⅞˝ • Ply material nylon• Tubeless • Shpg. 28 lbs.


ITEM 1-4806$16.99• New, KENDA 13x5.00-6 turf tire on steelwheel. Not for Highway Service.SPECIFICATIONS • Mount ¾˝ dia. bore x 3¼˝• Size 13x5.00-6 w/ 5/32˝ dia. pin hole• O.D. 12⅛˝ • Pressure 20 PSI Max.• Tread turf • Ply rating 2• Tread width 4˝ • Ply material nylon• Tubeless • Shpg. 8 lbs.


ITEM 1-4807$24.99• New, KENDA 18x6.50-8 turf tire on steelwheel. Not for Highway Service.SPECIFICATIONS • Mount ¾˝ dia. bore x 3½˝• Size 18x6.50-8 w/ ¼˝ wide keyway• O.D. 17˝ • Pressure 14 PSI Max.• Tread turf • Ply rating 2• Tread width 4⅞˝ • Ply material nylon• Tubeless • Shpg. 14 lbs.


ITEM 1-5029$34.95• New, KENDA Super Turf tire on blacksteel rim. Model K500. Not for Hi-wayservice.SPECIFICATIONS • Backspace 3˝• Size 18x6.50-8 • Tubeless• O.D. 17.8˝ • Load rating 770 lbs. max.• Tread turf • Pressure 28 PSI max.• Tread width 5¾˝ • Ply rating 4• Mount 4 holes on 4˝ B.C. • Shpg. 17 lbs.

TrailerBearingKits

• Brand new, DURA-ROLL replacementtrailer bearing kit. Use with boat, camping,utility and snowmobile trailers. 1 kit perwheel required. Bearings must be packedwith grease before installation. Kit contentsavailable at www.surpluscenter.com. Fullytested and exceeds VESC regulations. In-stallation instructions included.

Typical AxleBearing Bore Rating

ITEM Inner Outer (lbs.) Shpg. Price1-3535 1˝ 1˝ 2000 1 lb. $8.451-3536 ¾˝ ¾˝ 2000 1 lb. $7.251-3537 1¼˝ 1¼˝ 2000 1½ lb. $9.801-3538 1⅜˝ 11/16˝ 3500 1 lb. $9.951-3539 11/16˝ 11/16˝ 2000 1 lb. $7.95

13x5.00-6WheelAssemblyITEM 1-4141$16.95• New, tube type tire on gray painted steelwheel. Not for highway service. Greasezerk for axle.SPECIFICATIONS• Size 13x5.00-6 • Pressure 30 PSI• O.D. 13˝ • Hub offset ¾˝• Tread turf • Bushing steel• Tread width 4˝ • Tube type• Bore ¾˝ diam. • Ply rating 2 Ply• Bore thru-length 3˝ • Shpg. 8 lbs.

16x6.50-8WheelAssembly

ITEM 1-4144$28.95• New, tubeless tire on orange paintedsteel wheel. Not for highway service.SPECIFICATIONS• Size 16x6.50-8 • Bore thru-length 215/16˝• O.D. 16.5˝ • Pressure 30 PSI• Tread turf • Hub offset 113/16˝• Tread width 6½˝ • Tube type• Bore ¾˝ dia. • Ply Rating 2

w/ 3/16˝ keyway • Shpg. 15 lbs.

800-488-3407 Pneumatic Wheels 179&

15x5.00-6 Offset DriveTraction Wheels

New, KENDA Model K478 tire mounted onpainted steel wheel. Directional lug treadfor use on left or right hand side of equip-ment. Keyed bore hub. Not for highwayservice.SPECIFICATIONS • Max. pressure 18 PSI• Size 15x5.00-6 • Hub 1˝ bore, 4⅝˝ wide• O.D. 14.8˝ • Offset 2¼˝• Tread directional lug • Tubeless• Tread width 4.5˝ • Ply rating 2 Ply• Load range 430 lbs. • Shpg. 13 lbs.

ITEM 1-3910-L $32.95• Directional tread for left-hand side.

ITEM 1-3910-R $32.95• Directional tread for right-hand side.

13x5.00-6WheelAssemblyITEM 1-4143$16.95• New, tube type tire on orange paintedsteel wheel. Not for highway service.Grease zerk for axle.SPECIFICATIONS• Size 13x5.00-6 • Pressure 30 PSI• O.D. 13˝ • Hub offset ¾˝• Tread turf • Bushing steel• Tread width 4˝ • Tube type• Bore ¾˝ diam. • Ply rating 2• Bore thru-length 3˝ • Shpg. 8 lbs.


ITEM 1-4890$11.95• New, pneumatic tire mounted on steelrim.SPECIFICATIONS• Size 16x4.50-8 • Hub type offset• Outside dia. 15½˝ • Bearing plastic bushing• Cross section 3¾˝ • Tube type• Tread Turf • Ply rating 4• Hub ⅝˝ bore x 3½˝ wide • Shpg. 9 lbs.

4.00-6Wheel AssemblyITEM 1-4891$5.95• New, pneumatic tire mounted on steelrim.SPECIFICATIONS• Size 4.00-6 • Hub type offset• Outside dia. 13½˝ • Ball bearing• Cross section 3⅝˝ • Tube type• Tread Turf • Ply rating 2• Hub ⅝˝ bore x 2⅞˝ wide • Shpg. 8 lbs.

16x6.50-8 Offset TractionDrive Wheel Pair

ITEM 1-4957 $45.95• New pair of KENDA Model K-467 direc-tional snowblower tires mounted on yellowpainted steel wheels. ¼˝ diameter cross-hole for drive pin. Not for highway service.SPECIFICATIONS• Size 16x6.50-8 • Load range 830 lbs. (pair)• O.D. 16˝ • Max. pressure 14 PSI• Tread directional lug • Offset 2⅛˝• Tread width 5½˝ • Tubeless• Hub bore ⅞˝ diam. • Ply rating 2• Hub bore thru-length 5¾˝ • Shpg. 30 lbs.


ITEM 1-4945 $32.95• New pair of CARLISLE Super Lug tiresmounted on black painted steel wheels.Built for snow blowers. ¼˝ diametercrosspin holes on both sides of hub. Notfor highway service.SPECIFICATIONS• Size 13x5.00-6 • Max. pressure 20 PSI• O.D. 13˝ • Outside rim width 4˝• Tread directional lug • Hub offset• Tread width 4½˝ • Offset ½˝• Bore ¾˝ diam. • Tubeless• Bore thru-length 4˝ • Ply rating 2• Load range 580 lbs.(pair) • Shpg. 18 lbs.


ITEM 1-4148$13.95• New, turf tire on steel rim. Nylon bush-ings, hub is drilled for pin on extendedside.SPECIFICATIONS • Offset 1½˝• Size 16x4.50-8 • Tubeless• O.D. 15˝ • Load rating 250 lbs.• Tread turf • Pressure 30 PSI max.• Tread width 3½˝ • Ply rating 4• Hub ⅝˝ bore x 3½˝ wide • Shpg. 8 lbs.

4.00-6 WheelbarrowWheel

ITEM 1-4147$15.95• New, CARLISLE wheelbarrow tire onsteel wheel with steel bushings. Not for Hi-way Service.SPECIFICATIONS• Size 4.00-6 • Tubeless• O.D. 13˝ • Load rating 330 lbs.• Tread ribbed • Pressure 30 PSI max.• Cross section 4˝ • Ply rating 2• Hub ⅝˝ bore x 7˝ wide • Shpg. 6 lbs.

13 x 5.00-6TractionWheelAssemblyITEM 1-3570$12.95• New CARLISLE. Lug tread tire on steelrim. Not for Highway Service. Steel rim hascentered hub with crosshole on each sidefor left or right hand use. Tire mounted withvalve stem on outside with traction lugsgoing forward for right side use. Left sideuse would have tire stem on inside unlesstire is remounted.SPECIFICATIONS• Size 13x5.00-6 • Centered hub• O.D. 12½˝ • Tubeless• Tread directional lug • Pressure 20 PSI max.• Tread width 4¼˝ • Hub width 3⅛˝• Hub 1˝ dia. with • Ply rating 25/16˝ crosshole • Shpg. 10 lbs.

Find more wheels onpage 192

2.80/2.50-4WheelAssemblyITEM 1-4949-G$7.99• New, pneumatic tire on grey steel rim.SPECIFICATIONS • Hub type centered• Size 2.80/2.50-4 • Ball bearing• Outside diameter 8½˝ • Tube type• Cross section 2½˝ • Pressure 50 PSI max.• Tread sawtooth • Ply rating 4• Hub ½˝ bore x 3˝ wide • Shpg. 5 lbs.

9x3.50-4WheelAssemblyITEM 1-4197$25.95• New, KENDA K372 Turf Max tire on steelrim. Precision ball bearings in hub. Not forHi-way Service.SPECIFICATIONS• Size 9x3.50-4 • Tubeless• O.D. 8.5˝ • Load rating 165 lbs. max.• Tread turf max • Pressure 26 PSI max.• Tread width 3˝ • Ply rating 2• Hub ½˝ bore x 3⅝˝ wide • Ply material nylon• Hub spacing centered • Shpg. 6 lbs.


ITEM 1-4946$23.95• New, KENDA K404LG smooth tread tireon steel rim. Grease zerk for axle.SPECIFICATIONS• Size 11x4.10-5 • Tubeless• O.D. 10½˝ • Pressure 46 PSI max.• Tread width 3½˝ • Rating 4 ply• Hub ¾˝ dia. x 4¼˝ wide • Max load 320 lbs.

w/steel bushings • Shpg. 8 lbs.

4.10/3.50-6WheelAssy.

ITEM 1-1938$23.99• New, CHENG SHIN rubber tire on yellowsteel wheel. ⅝˝ diam. x 2½˝ smooth shafton bearings with ⅜˝-16 female thread ateach end. Includes brake drum 4⅛˝ diam.x 1˝ wide. Offset hub. Not for highway use.SPECIFICATIONS • Tire type tube• Size 4.10/3.50-6 • Load range A• O.D. 12˝ • Pressure 30 PSI max• Tread knobby • Ply rating 2• Tread width 3˝ • Shpg. 8 lbs.

13x5.00-6DriveWheelAssemblyITEM 1-3903$28.99• New, KENDA K358 Turf Rider tubelesstire on gray painted steel wheel. Not forhighway service. Hub drilled for drive pin.SPECIFICATIONS• Size 13x5.00-6 • Pressure 20 PSI• O.D. 12˝ • Load capacity 295 lbs.• Tread turf • Hub offset ⅜˝• Tread width 4˝ • Tubeless• Bore ¾˝ diam. • Ply rating 2• Bore thru-length 3¼˝ • Shpg. 9 lbs.


ITEM 1-4933 $29.99• New pair of KENDA Model K-467 direc-tional snowblower tires mounted on or-ange painted steel wheels. ¼˝ dia. cross-hole for drive pin. Not for highway service.SPECIFICATIONS• Size 13x5.00-6 • Hub bore ¾˝ diam.• O.D. 12½˝ • Hub thru-length 4˝• Tread directional lug • Hub offset ½˝• Tread width 5˝ • Tubeless• Load range 590 lbs. (pair) • Ply rating 2• Max. pressure 20 PSI • Shpg. 28 lbs.

13x5.00-6 DriveWheelAssemblies

• New, tubeless tire on painted steel wheel.Not for highway service.SPECIFICATIONS • Bore thru-length 2½˝• Size 13x5.00-6 • Pressure 30 PSI• O.D. 12˝ • Hub offset ⅜˝• Tread Turf • Tubeless• Tread width 4˝ • Ply rating 2 Ply• Bore ¾˝ dia. w/keyway • Shpg. 8 lbs.

ITEM 1-4069-G $19.99• Gray painted steel wheel.

ITEM 1-4069-O $19.99• Orange painted steel wheel.

180 Pneumatic Wheels www.surpluscenter.com8

13x5.00-6 WheelAssemblies

• New, tubeless tireson painted steelwheel. Not for high-way service. Greasezerk for axle.SPECIFICATIONS• Size 13X5.00-6 • Pressure 30 PSI• O.D. 12˝ • Hub offset ¾˝• Tread Turf • Bushing steel• Tread width 4˝ • Tube type tubeless• Bore ¾˝ diam. • Ply rating 2 Ply• Bore thru-length 3˝ • Shpg. 8 lbs.

ITEM 1-4068-G $19.99• Gray painted steel wheel.

ITEM 1-4068-O $19.99• Orange painted steel wheel.

13X5.00-6 Offset TractionDrive Wheel Pair

ITEM 1-4048 $25.99• New pair of CARLISLE Model X-TRACtires mounted on painted steel wheels.Built for snow blowers. Directional lugtread mounted with ¼˝ diameter cross-holeto outside. Not for highway service.SPECIFICATIONS• Size 13X5.00-6 • Load range 415 lbs.• O.D. 12˝ • Max. pressure 20 PSI• Tread directional lug • Hub offset 1½˝• Tread width 4½˝ • Tubeless• Bore ⅞˝ diam. • Ply rating 2 Ply• Bore thru-length 5⅛˝ • Shpg. 19 lbs.

4.10x-6PneumaticDriveWheelITEM 1-3932$27.99• New, snowblower drive wheel. AMERI-CANA SnowPro tire on gray steel rim with¼˝ offset drive hub.SPECIFICATIONS • Hub ¾˝ bore x 4¼˝,• Size 4.10-6 5/16˝ crosshole• O.D. 12˝ • Pressure 24 PSI max.• Tread knobby • Ply rating 2• Tread width 3˝ • Ply material nylon• Tubeless • Shpg. 5 lbs.

4.10/3.50-4WheelAssemblyITEM 1-4889$3.99• New, pneumatic tire mounted on plasticrim.SPECIFICATIONS• Size 4.10/3.50-4 • Bearing plastic bushing• Outside dia. 10½˝ • Tube type• Cross section 3¼˝ • Load rating 300 lbs.• Tread Knobby • Pressure 30 PSI max.• Hub ⅝˝ bore x 27/16˝˝ wide • Ply rating 2• Hub type offset • Shpg. 5 lbs.

7½˝ x 2˝ WheelAssembly

ITEM 1-1787$7.99• New. Gray tire and plastic wheel. 2¼˝ widehub has 5/16˝ ID ball bearings. 36 PSI max.Furnished with 3˝ long axle bolt. Shpg. 2 lbs.

10˝ x 2¾˝SolidWheel

ITEM 1-4843$9.99• New, solid rubber tire on 4 spoke grayplastic wheel. Ball bearing hub.SPECIFICATIONS• Size 10˝ dia. x 2¾˝ wide • Load capacity 450 lbs.• Tread width 2˝ • Bearing ball• Bore ⅝˝ diam. • Hub offset ¼˝• Bore thru-length 2¼˝ • Shpg. 7 lbs.

8˝ x 1¾˝PlasticWheel

ITEM 1-4017$4.95• New, rubber tire on plastic wheel.SPECIFICATIONS • Bore ½˝ dia.• Size 8˝ dia. x 1¾˝ wide • Bore thru-length 1⅜˝• Tread thru bar • Shpg. 2 lbs.

800-488-3407 Semi-Pneumatic Wheels 181&

10˝ x 2˝ SolidRubberTire Wheel

ITEM 1-3785$6.95• New, CARLISLE solid rubber tire on plas-tic wheel. Ball bearings in the bore.SPECIFICATIONS • Bore ⅝˝ dia.• Size 10˝ dia. x 2˝ wide • Bore thru-length 2⅜˝• Tread ribbed • Shpg. 7 lbs.

10˝ x 2½˝SolidWheel

ITEM 1-3658-A$15.95• New, Valley Industries solid rubber tire ontwo piece steel wheel. Ball bearing withoffset hub.SPECIFICATIONS • Bore thru-length 1¾˝• Diameter 9¾˝ • Bearing ball• Tread width 1⅝˝ • Hub offset• Bore ⅝˝ diam. • Shpg. 9 lbs.

10˝ x 2½˝WheelAssemblyITEM 1-3510$4.99• New, semi-pneumatic tire on gray plasticwheel. Centered hub.SPECIFICATIONS • Bore ⅝˝ dia.• Size 10˝ x 2½˝ • Bore thru-length 2˝• Tread ribbed • Shpg. 4 lbs.

10 x 3.25 Semi-PneumaticWheel

ITEM 1-4113$8.99• New, CARLISLE TURF PRO R/L RE-LIANCE semi-pneumatic tire on plasticwheel. Plastic bushing. Turf tread. SPECIFICATIONS• Size 10˝ x 3¼˝ • Thru length 2.2˝• O.D. 10˝ • Offset hub ⅞˝• Tread width 3˝ • Size 10˝ x 10˝ x 39/16˝• Bore ⅝˝ dia. • Shpg. 6 lbs.

9¾˝ x 1¾˝ SolidRubber TireOn Plastic Wheel

ITEM 1-3112$7.95• New, FALLSHAW solid rubber tire onplastic wheel.SPECIFICATIONS • Tread pattern 4 groove• Wheel size 9¾˝ x 1¾˝ • Bore & thru-lgth. ¾˝ diam.• Wheel: steel drive bushing x 111/16˝ w/ 3/16˝ keyway• Hub centered • Shpg. 5 lbs.

ITEM 1-3112-A $6.95• Same as ITEM 1-3112 above except nopress in hub.

8 x 2 WheelWith Ball Bearings

ITEM 1-3833$4.95• New. Heavy duty semi-pneumatic rubbertire on black plastic hub. Zigzag rib treadpattern.SPECIFICATIONS• Size 8˝ dia. x 2˝ wide • Hub width 17/16˝• Hub bore ½˝ • Shpg. 3 lbs.

7˝ x 1⅝˝PlasticWheelITEM 1-4719$2.99• New, one piece molded tire with blackplastic wheel. 5 spoke wheel has recessfor cap (not included). Undrilled passagefor grease zerk molded into hub.SPECIFICATIONS • Bore ¾˝ dia.• Size 7˝ dia. x 1⅝˝ wide • Thru-length 1⅝˝• Tread bar • Shpg. 1½ lbs.

10 x 3.25 Semi-PneumaticWheels

• New, semi-pneumatic tires on plasticwheels. Turf tread.SPECIFICATIONS • Bore ⅝˝ dia.• Size 10 x 3.25 • Bore thru length 2⅝˝• O.D. 10˝ • Bearing plastic bushing• Tread width 3˝ • Offset hub 1˝• Tread turf • Shpg. 6 lbs.

ITEM 1-4887 $7.95• Black plastic wheel.

ITEM 1-4888 $7.95• White plastic wheel.

8˝ x 3˝PlasticWheelITEM 1-4722$3.99• New, one piece molded tire with blackplastic wheel. Heavy duty construction. 5spoke wheel with centered hub. Undrilledpassage for grease zerk molded into hub.SPECIFICATIONS • Bore ¾˝ dia.• Size 8˝ dia. x 3˝ wide • Thru-length 3⅛˝• Tread bar • Shpg. 4 lbs.

6 x 1.5 Semi-PneumaticWheel Assy.ITEM 1-4039$2.49• New, semi-pneumatic tire on black plas-tic wheel. Offset hub.SPECIFICATIONS • Tread width 1¼˝• Size 6 x 1.5 • Bore ⅜˝ dia.• O.D. 6˝ • Bore thru-length 1¼˝• Tread ribbed • Shpg. 3 lbs.

10˝ x 1¾˝ RubberTire On Plastic WheelITEM 1-4886$2.99• New semi pneumatic rubber tire on whiteplastic wheel. Diamond tread. Round borewith two 13/64˝ round keyway slots.SPECIFICATIONS • Bore ½˝ dia. with dual• Size 10˝ dia. x 1¾˝ wide 13/64˝ round keyways• Tread Diamond • Offset hub• Bore thru-length 1⅝˝ • Shpg. 3 lbs.

10˝ x 1¾˝ RubberTire On PlasticWheelITEM 1-4977$3.99• New rubber tire on gray plastic wheel. Di-amond pattern tread. Offset hub.SPECIFICATIONS • Bore ½˝ dia.• Size 10˝ dia. x 1¾˝ wide • Thru-length 2¼˝• Tread Diamond • Shpg. 3 lbs.

182 Miscellaneous Wheels www.surpluscenter.com8

8 x 2˝TPRWheel

ITEM 1-4163$4.99• New JARVIS wheel, bearingless hub.Thermoplastic rubber (TPR) tread bondedto polyolefin wheel. Rounded profile foreasier swiveling. Centered hub.SPECIFICATIONS• Diameter 8˝ • Hub width 23/16˝• Width 2˝ • Temperature range• Load capacity 500 lbs. -40° to 180°F• Bore 1.175˝ • Shpg. 2 lbs.9˝ x 3˝

PlasticWheelITEM 1-4931$3.99• New, black plastic wheel and hub.SPECIFICATIONS • Bore thru-length 2¾˝• Size 9˝ dia. x 3˝ wide • Plain bearing• Tread ribbed • Hub offset• Bore ⅜˝ diam. • Shpg. 1¾ lbs.

10˝ x 1⅞˝SolidWheel

ITEM 1-3959$11.99• New, solid rubber tire on 6 spoke plasticwheel. Ball bearing hub.SPECIFICATIONS• Size 10˝ dia. x 1⅞˝ wide • Bearing ball• Bore ½˝ dia. • Hub offset ¼˝• Bore thru-length 27/16˝ • Shpg. 12 lbs.

8˝ x 1½˝ ThermoplasticRubberWheel

ITEM 1-4085$7.99• New Jarvis 8315P10 wheel w/nylonbushing hub. Blue thermoplastic rubbertread bonded to polyolefin wheel. Thermo-plastic tread resistant to harsh impactsand withstands oil, grease, solvents,cleaning compounds and other chemicals.Centered hub.SPECIFICATIONS• Diameter 8˝ • Bore width 2⅛˝• Width 1½˝ • Temperature range• Load capacity 800 lbs. -40° to 180° F• Bore ½˝ w/nylon bushings• Shpg. 2 lbs.

8˝ x 2¼˝RubberWheel

ITEM 1-4086$13.99• New, molded donut rubber tire on alu-minum wheel. Quiet cushioned rolling andeasy swiveling with crowned design. Ex-tremely resilient.SPECIFICATIONS • Bore thru-length 2¼˝• Size 8˝ O.D. x 2¼˝ wide • Bearing ball• Load capacity 550 lbs. • Hub centered• Bore ½˝ diam. • Shpg. 5 lbs.

8 x 2 RubberTreadWheelITEM 1-4948$4.99• New, Santoprene rubber tire treadmolded on black plastic wheel. Delrinbushing bearing.SPECIFICATIONS • Load rating 675 lbs.• Size 8 x 2 • Hub bushing• O.D. 8˝ • Bore ½˝ dia.• Tread smooth • Bore thru-length 2⅛˝• Tread width 2˝ • Shpg. 3 lbs.

8˝ x 2˝RubberWheel

ITEM 1-4088$9.99• New, molded rubber tire on aluminumwheel.SPECIFICATIONS• Size 8˝ O.D. x 2˝ wide • Bore thru-length 23/16˝• Load capacity 500 lbs. • Hub centered• Bore 13/16˝ diam. • Shpg. 4 lbs.

6½˝ x 1½˝Wheel

ITEM 1-4713$3.99• New, FAULTLESS Model 44141 wheel.Duraflex tire on polypropylene wheel.Roller bearings.SPECIFICATIONS • Bore thru-length 2½˝• Wheel size 6½˝ dia. x 1½˝ • Load capacity 300 lbs.• Bore ⅝˝ dia. smooth • Shpg. 1½ lbs.

6½˝ x 1½˝Wheel

ITEM 1-4714$3.99• New, FAULTLESS Model 44143 wheel.Duraflex tire on polypropylene wheel.Roller bearings.SPECIFICATIONS • Bore thru-length 2½˝• Wheel size 6½˝ dia. x 1½˝ • Load capacity 300 lbs.• Bore ¾˝ dia. smooth • Shpg. 1½ lbs.

6˝ x 2˝ PolyolefinWheel

ITEM 1-3508$2.99• New, hard black polyolefin wheel origi-nally made for garbage carts.SPECIFICATIONS • Bore thru-length 29/32˝• Size 6˝ diam. x 2˝ wide • Bearing plain• Load capacity 300 lbs. • Hub centered• Bore ½˝ diam. • Shpg. 2 lbs.

6˝ x 1¼˝ PolyLocGrey Wheel

ITEM 1-400279¢• New, JARVIS Model 26162Y PolyLocpolyurethane tread bonded to polyolefinwheel core. No bearing in bore.SPECIFICATIONS • Bore 1.112˝ dia.• Size 6˝ dia. x 1¼˝ wide • Hub thru- length 0.95˝• Load capacity 300 lbs. • Shpg. 1 lb.

5˝ x 2˝ CompositeBall BearingWheelITEM 1-4702$4.99• New PEMCO Model P86191E ball bear-ing wheel. Dark blue polyurethane treadmolded to polyolefin wheel. Resistant toimpacts and oil, grease, solvents, cleaningcompounds and other chemicals. Cen-tered hub.SPECIFICATIONS • Bore ½˝• Diameter 5˝ • Hub width 2½˝• Width 2˝ • Temp. range -40° to 180°F• Load capacity 750 lbs. • Shpg. 2 lbs.

5˝ x 1¼˝PolyolefinWheelITEM 1-400939¢• Used, good condition. JARVIS Model5513JKOSM solid polyolefin wheel. Nobearing.SPECIFICATIONS • Bore ⅜˝ dia.• Size 5˝ dia. x 1¼˝ wide • Hub thru- length 1½˝• Load capacity 300 lbs. • Shpg. 1½ lbs.Find more wheels on

page 192

12˝ x 2½˝SolidWheel

ITEM 1-4903$12.99• New, solid rubber tire on 8 spoke grayplastic wheel. Ball bearing hub.SPECIFICATIONS• Size 12˝ dia. x 2½˝ wide • Load capacity 500 lbs.• Tread width 2½˝ • Bearing ball• Bore ⅝˝ diam. • Hub centered• Bore thru-length 3¼˝ • Shpg. 8 lbs.

5˝ x 1¼˝ Black TreadShoppingCart Wheel

ITEM 1-4701$1.29• New, PEMCO Model P8302E replace-ment shopping cart wheel. Blackpolyurethane tread bonded to polyolefinwheel. Red thread guards.SPECIFICATIONS • Bore thru-length 15/8˝• Size 5˝ diam. x 1¼˝ wide • Ball bearing• Load capacity 315 lbs. • Centered hub• Bore 5/16˝ diam. • Shpg. ¾ lb.

5˝ x 1¼˝ PolyurethaneWheel

ITEM 1-4182$1.49• New, black polyurethane tread bondedto polyolefin wheel. Ball bearing hub withguards.SPECIFICATIONS • Bore thru-length 1⅝˝• Size 5˝ dia. x 1¼˝ wide • Bearing ball• Load capacity 300 lbs. • Hub centered• Bore 5/16˝ diam. • Shpg. 1 lb.

5˝ x 2˝ CompositeWheel

ITEM 1-3788$2.95• New JARVIS Model 5220 bearinglesswheel. Thermoplastic rubber tread moldedto polyolefin wheel. Thermoplastic treadresistant to harsh impacts and withstandsoil, grease, solvents, cleaning compoundsand other chemicals. Centered hub.SPECIFICATIONS• Diameter 5˝ • Hub width 23/16˝• Width 2˝ • Temperature range• Load capacity 375 lbs. -40° to 180°F• Bore 13/16˝ • Shpg. 1½ lbs.

800-488-3407 Miscellaneous Wheels 183&

Rubber Tire on Plastic Wheels• New CEW rubber tire on plastic wheel.

ITEM Dia. Width Tread Bore Thru-Length Shpg. Price1-4114 6˝ 1½˝ Diamond ½˝ dia. Smooth 1⅜˝ ¾ lb. $1.991-4115 7˝ 1½˝ Diamond ½˝ dia. Smooth 1⅝˝ ¾ lb. $2.491-4116 7˝ 1¾˝ Brick ½˝ dia. Smooth 1½˝ 1 lb. $2.491-4117 7˝ 1⅜˝ Diamond ½˝ dia. Smooth 1½˝ ¾ lb. $2.491-4118 7˝ 1½˝ Bar ½˝ dia. Smooth 1½˝ ¾ lb. $2.491-4119 7˝ 1¾˝ Brick ⅜˝ dia. Smooth 19/16˝ 1 lb. $2.491-4120 8˝ 1⅝˝ Diamond ½˝ dia. Smooth 1½˝ 1¼ lb. $2.991-4121 8˝ 1⅝˝ Ribbed ½˝ dia. Smooth 17/16˝ 1¼ lb. $2.991-4122 8˝ 1¾˝ Bar ½˝ dia. Smooth 17/16˝ 1½ lb. $2.991-4123 8˝ 1⅝˝ Diamond ½˝ dia. Smooth 1⅝˝ 1¼ lb. $2.991-4124 8˝ 1¾˝ Diamond ½˝ dia. Smooth 19/16˝ 1¼ lb. $2.991-4125 8˝ 1⅝˝ Ribbed ½˝ dia. Smooth 1½˝ 1¼ lb. $2.991-4126 8˝ 1¾˝ Diamond ⅜˝ dia. Smooth 1½˝ 1¼ lb. $2.991-4127 8˝ 1¾˝ Diamond ⅜˝ dia. Smooth 1½˝ 1¼ lb. $2.991-4128 10˝ 1¾˝ Ribbed ½˝ dia. Smooth 1½˝ 1½ lb. $3.991-4129 10˝ 1¾˝ Ribbed ½˝ dia. Smooth 1½˝ 1½ lb. $3.991-4130 10˝ 1¾˝ Ribbed ⅝˝ dia. Smooth 21/16˝ 1½ lb. $3.991-4131 10˝ 1¾˝ Diamond ⅝˝ dia. Smooth 2¼˝ 1½ lb. $3.991-4132 10˝ 3˝ Chevron ¾˝ dia. Smooth 27/16˝ 3 lbs. $8.991-4136 14˝ 1¾˝ Diamond ⅝˝ dia. Smooth 2½˝ 4 lbs. $8.991-4137 14˝ 1¾˝ Diamond ½˝ dia. Smooth w/ 2 Flats 2¼˝ 4 lbs. $8.99

1-4115 1-4125

1-4118

1-4131

1-4132

1-4134

1-4136

5˝ x 15/16˝Caster WheelITEM 1-326675¢• New, SHEPHERD Model WH0.50X 1.00 -SFR1 caster wheel. Soft, non-marking rubber(75A durometer) maximizes floor pro tec tionand provides quiet, cushioned ride.SPECIFICATIONS• Size 5˝ O.D. x 15/16˝ width • Hub width 1.15˝• Load capacity 130 lbs. • Bore 5/16˝• No bearings • Shpg. 2 lbs.

5˝ x 1¼˝ ShoppingCart Wheels

• New, SHEPARD re-placement shoppingcart wheels. Threadguards.SPECIFICATIONS •Bore thru-length 1⅝˝• Size 5˝ dia. x 1¼˝ wide • Ball bearing• Load capacity 315 lbs. • Centered hub• Bore 5/16˝ dia. • Shpg. ¾ lb.

ITEM 1-4975 $1.49• Model P83224E. Black polyurethanetread bonded to polyolefin wheel.

ITEM 1-4976 $1.49• Model P83220E. Blue polyurethane treadbonded to polyolefin wheel.

5˝ x 1½˝ RubberTiredWheel

ITEM 1-4058$5.95• New, molded rubber tire on cast ironwheel. Grease zerk for bore.SPECIFICATIONS• Size 5˝ O.D. x 1½˝ wide • Bearing smooth• Load capacity 345 lbs. w/grease passage• Bore 13/16˝ diam. • Hub centered• Bore thru-length 1⅝˝ • Shpg. 3 lbs.



6˝ x 1¼˝ PolyLocBlueWheelITEM 1-4813$1.99• New, JARVIS Model 6314PC0 PolyLocpolyurethane tread bonded to polyolefinwheel core. Delrin bushing in bore.SPECIFICATIONS • Bore ½˝ dia.• Size 6˝ dia. x 1¼˝ wide • Hub thru- length 1½˝• Load capacity 350 lbs. • Shpg. 1 lb.

2½˝ x ⅞˝ RubberWheel

ITEM 1-475745¢• New, SHEPHERD wheel. Clear Viporwheel molded on red support trim on plas-tic hub. Vipor material is resistant to mostoils.SPECIFICATIONS • Bore thru-length 15/16˝• Size 2½˝ dia. x ⅞˝ wide • Plian bearing• Load capacity 80 lbs. • Hub centered• Bore ¼˝ dia. • Shpg. ½ lb.

3˝ x 1¼˝ RedPoly Wheel

ITEM 1-4741$1.79• New, FAULTLESS red polyurethane treadon plastic hub. Ball bearing for smoothturning.SPECIFICATIONS • Bore thru-length 1.7˝• Size 3˝ dia. x 1¼˝ wide • Bearing ball• Load capacity 180 lbs. • Hub centered• Bore ⅜˝ dia. • Shpg. ½ lb.

4˝ x 15/16˝ RubberWheel

ITEM 1-367459¢• New, JARVIS wheel. Cushion thermo-plastic rubber grey tread bonded to a light-weight yet extremely durable polyolefinwheel core. Plain bearing.SPECIFICATIONS • Bore thru-length 17/32˝• Size 4˝ diam. x 15/16˝ wide • Bearing none• Load capacity 125 lbs. • Hub centered• Bore 5/16˝ diam. • Shpg. 1 lb.

4˝ x 15/16˝Wheel

ITEM 1-348950¢• New, solid hard rubber, with plastic boreinsert utility wheel. Centered hub.SPECIFICATIONS • Bore 5/16˝• Diameter 4˝ • Hub width 13/16˝• Width 15/16˝ • Shpg. 1 lb.

184 Miscellaneous Wheels www.surpluscenter.com8

2˝ x 13/16˝ SolidRubberWheelITEM 1-373179¢• New JARVIS 2-101 solid rubber wheel.Centered hub with bushing insert.SPECIFICATIONS • Bore 5/16˝• Diameter 2˝ • Bore width 15/16˝• Width 13/16˝ • Temp. range -30° - 160° F• Load capacity 75 lbs. • Shpg. ¼ lb.

2½˝ x ⅞˝RubberWheelITEM 1-475539¢• New, SHEPHERD wheel. Black rubberwheel on plastic hub.SPECIFICATIONS • Bore thru-length 15/16˝• Size 2½˝ dia. x ⅞˝ wide • Bearing Delrin• Load capacity 80 lbs. • Hub centered• Bore ¼˝ dia. • Shpg. ½ lb.

2½˝ x 13/16˝Caster Wheel

ITEM 1-396249¢• New, SHEPHERD bright blue thermo-plastic urethane wheel with black hub.SPECIFICATIONS• Size 2½˝ O.D. x 13/16˝ width • Hub width 0.90˝• Load capacity 120 lbs. • Bore ¼˝• Bearings none • Shpg. ½ lb.

3˝ x 13/16˝ CasterWheel

ITEM 1-396349¢• New, SHEPHERD gray polyurethanecaster wheel.SPECIFICATIONS• Size 3˝ O.D. x 13/16˝ width • Hub width 1˝• Load capacity 125 lbs. • Bore ¼˝• Bearings none • Shpg. ½ lb.

3˝ x 1¼˝ SoftRubber Wheel

ITEM 1-367979¢• New, JARVIS soft grey rubber wheel withDelrin bearing.SPECIFICATIONS • Bore thru-length 113/32˝• Size 3˝ dia. x 1¼˝ wide • Bearing Delrin• Load capacity 150 lbs. • Hub centered• Bore ½˝ diam. • Shpg. 1 lb.

3½˝ x 1¼˝Wheel

ITEM 1-318249¢• New, plastic utility wheel with ribbed rub-ber tire. Offset hub (⅛˝)SPECIFICATIONS • Bore 5/16˝• Diameter 3½˝ • Hub width 1¼˝• Width 1¼˝ • Shpg. ½ lb.

4˝ x 1¼˝CasterWheel

ITEM 1-4062$1.95• New, solid soft rubber wheel. Centeredbore.SPECIFICATIONS • Bore thru-length 1½˝• Size 4˝ O.D. x 1¼˝ wide • Bearing bushing• Load capacity 170 lbs. • Hub centered• Bore ⅜˝ diam. • Shpg. 1½ lbs.

3⅞˝ x ¾˝Wheel

ITEM 1-1510$1.99• New. Hard plastic 3⅞˝ diam. x ¾˝ widewheel. 3/16˝ diam. x 5/16˝ threaded stud formounting. Shpg. ½ lb.

3˝ CasterWheel

ITEM 1-3172-A$2.49• New, hard rubber caster wheel with rollerbearing hub. (Dust covers must bemounted with lip facing outward.)SPECIFICATIONS • Bearing size• Outside diam. 3˝ ¾˝ ID x 13/16˝ wide• Tread width 17/16˝ • Load capacity 250 lbs.• Hub width 1⅝˝ • Shpg. 1 lb.

5˝ BogieWheel

ITEM 1-3479$2.99• New, solid rubber wheel on riveted metalhub. Ball bearings. Offset hub, one sidehas chamfered face with 0.70˝ max I.D.SPECIFICATIONS • Hub bore 5/16˝• O.D. 5˝ • Hub width 13/16˝• Tread smooth • Hub offset 0.40˝• Tread width tapers ¾ ̋to ¼˝ • Shpg. 1 lb.

Ordering Information & Shipping Rates on pages 102 - 103Order Blank on page 104

2˝ x 1˝ SolidRubberWheelITEM 1-499199¢• New SHEPHERD solid rubber wheel.Centered hub with ball bearing.SPECIFICATIONS• Diameter 2˝ • Bore 5/16˝• Width 1˝ • Bore width 1⅛˝• Load capacity 80 lbs. • Shpg. ½ lb.

Swivel PlateCaster

ITEM 1-1545 $7.95• Used. Built for use under heavy officeequipment. Made by Bassick. Ball bearingswivel caster has dual 2½˝ diam. x ⅞˝ widewheels. Top plate is 9⅝˝ x 4⅞˝ of ¼˝ thicksteel. Four mounting holes on 7⅞˝ x 3˝ pat-tern. Weight capacity 220 lbs. Near newcondition. Shpg. 9 lbs.

3˝ x 1˝ Grip RingSwivel StemCasterSet of 4

ITEM 1-4255 $4.95• New, ALBION Model F1RR03052S-S21swivel grip ring stem caster set of four.Solid soft rubber wheel. Delrin bushing.Plated steel caster yoke.SPECIFICATIONS• Wheel size 3˝ dia. x 1˝ w. • Mounting height 3¾˝• Load capacity 500 lbs. (set) • Mount 7/16˝ dia. x 1⅜˝ long• Stem grip ring • Shpg. 4 lbs.

3˝ x 1¼˝ Adj.Height Swivel

CasterSet

ITEM 1-4348 $14.95• New, JARVIS Model P22KIT set of fouradjustable height swivel casters, two withbrakes. Solid polyolefin wheel. Platedcaster yoke.SPECIFICATIONS • Mounting height• Wheel size 3˝ dia. x 1¼˝ w. min. 5⅞˝ max. 7˝• Load capacity 1000 lbs. (set) • Mount 4 holes on• Top plate 3¼˝ x 3¼˝ 2⅝˝ x 2⅝˝ centers• Bolt holes 5/16˝ dia. • Shpg. 11 lbs.

4˝ Plate Caster Setw/Adjustable

Height

ITEM 1-3137 $15.99• New, plate caster set. Two swivel andtwo rigid casters. Rigid casters feature ad-justable top plate height. Rigid castersmounting height can be adjusted from 4⅝˝minimum to 5˝ maximum. Plated steel yokewith a hard plastic wheel. Brake lock onwheels of rigid caster.SPECIFICATIONS• Wheel size 4˝ dia. x 1˝ w. • Mount 4 bolt on• Top plate 3¾˝ x 2½˝ centers

4⅛˝ x 2⅞˝ x ⅛˝ thick • Bolt holes ¼˝ diam.• Mtg. height 4⅝˝ min. • Shpg. 8 lbs.

3˝ x 1⅜˝CasterSet

ITEM 1-3056 $7.99• Used, caster set includes two swivel andtwo rigid casters. Black hard plastic wheel.SPECIFICATIONS • Plate size 3¾˝ x 2¾˝• Wheel 3˝ dia. x 1⅜˝ wide • 4 bolt mount 3˝ x 1¾˝ ctrs.• Mounting height 3⅞˝ • Bolt hole 5/16˝ diam.• Set load capacity 200 lbs. • Shpg. 7 lbs.

5˝ x 1¼˝ SwivelGrip RingCasterPairITEM 1-4267$8.95• New, ALBION Model 02XA05028S008Aswivel grip ring stem caster pair.Polyurethane tread on polypropylenewheel. Precision ball bearings. Platedcaster yoke.SPECIFICATIONS• Wheel size 5˝ dia. x 1¼˝ w. • Mount ⅞˝ dia. x 2⅛˝• Load capacity 700 lbs. (pair) long w/ bolt hole• Grip ring stem • Bolt holes ¼˝ dia.• Mounting height 5⅞˝ • Shpg. 4 lbs.

5˝ x 1¼˝ SwivelGrip Ring Stem CasterSet Of 4

ITEM 1-4280$12.95• New, ALBION Model DCRN05052S-S22swivel grip ring stem caster set of four.Solid hard rubber wheel. Delrin bushing.Plated caster yoke.SPECIFICATIONS• Wheel size 5˝ dia. x 1¼˝ w. • Mounting height 5⅝˝• Load capacity 1400 lbs. (set) • Mount 13/16˝ dia. x 113/16˝• Grip ring stem • Shpg. 10 lbs.

800-488-3407 Caster Sets & Dual Wheel Casters 185&

5˝ x 2˝ ToolboxCaster

Set

ITEM 1-4893$18.95

• New, WATERLOO 1006599 toolboxcaster set. Includes two swivel, two rigidcasters and fasteners. Swivel casters havebrakes.SPECIFICATIONS• Wheel size 5˝ dia. x 2˝ w. • Mounting height 6˝• Set load capacity 1120 lbs. • Mount 4 bolt holes on• Top rigid plate 4˝ x 2¾˝ 3˝ x 1¾˝ centers• Top swivel plate • Bolt holes 5/16˝ dia.

311/16˝ x 2¾˝ • Shpg. 10 lbs.

5˝ x 2˝ ToolboxCaster

Set

ITEM 1-4894$19.95

• New, WATERLOO 1010342 toolboxcaster set. Includes four swivel plate cast-ers with brakes and fasteners. Each swivelcaster has a brake.SPECIFICATIONS• Wheel size 5˝ dia. x 2˝ w. • Mount 4 bolt holes on• Set load capacity 1120 lbs. 3˝ x 1¾˝ centers• Top plate 311/16˝ x 2¾˝ • Bolt holes 5/16˝ dia.• Mounting height 6˝ • Shpg. 12 lbs.

5˝ x 2˝ CasterSet

ITEM 1-4109$16.95

• New, KOBALT toolbox caster set in-cludes two swivel casters with brakes, tworigid casters and mounting hardware.Black hard plastic wheel.SPECIFICATIONS • Plate size 3˝ x 4˝• Wheel 5˝ dia. x 2˝ wide • 4 bolt mnt. 1¾˝ x 3˝ ctrs.• Mounting height 6˝ • Bolt holes ⅜˝ diam.• Set load capacity 1120 lbs. • Shpg. 8 lbs.

4½˝ x 1½˝Toolbox Caster

Set

ITEM 1-4929$13.95

• New, WATERLOO 1008771 toolboxcaster set. Includes two swivel plate cast-ers, two rigid casters and fasteners. Swivelcasters have brakes.SPECIFICATIONS• Wheel size 4½ ̋dia. x 1½ ̋w.• Mounting height 5¾˝• Set load capacity 700 lbs. • Mount 4 bolt holes on• Top rigid plate 4˝ x 2¾˝ 3˝ x 1¾˝ centers• Top swivel plate • Bolt holes 5/16˝ dia.

311/16˝ x 2¾˝ • Shpg. 8 lbs.

1½˝ Dual WheelSwivelCaster Set

ITEM 1-5024$1.99• New, set of 4 nylon hooded swivel cast-ers with dual plastic wheels and platedsteel stem and mounting plate. Independ-ent wheel rotation in each caster.SPECIFICATIONS • Mounting height 2⅛˝• Wheel size • Top plate 15/16˝ sq.

1½˝ dia. x ¼˝ • Mount four ⅛˝ slots(2 per caster) 11/16˝ x 11/16˝

• Load capacity 50 lb. ea. 15/16˝ x 15/16˝(200 lbs. per set) • Shpg. ½ lb.

7⅞˝ x 11/16˝SwivelPlateCasterw/ Brake &Swivel Lock

ITEM 1-4483 $12.95• New RHOMBUS Model 441H07R200 -CZPK swivel plate caster with wheel brakeand swivel lock. Plated steel rim, yoke andplate. Solid rubber tire. Roller bearings in hub.SPECIFICATIONS• Wheel size 7⅞˝ dia. x 11/16˝ • Mounting height 9¼˝• Load capacity 507 lbs. • Mount 4 holes on 4⅛˝ x 3˝• Top plate • Bolt holes 7/16˝ diam.

5⅜˝ x 45/16˝ • Shpg. 8 lbs.

186 Swivel Casters www.surpluscenter.com8

3˝ x 2˝ Dual WheelSwivel PlateCaster

ITEM 1-4311$2.95• New, SHEPARD Model PTS75120GR-Udual wheel swivel plate caster. Plated steelmounting plate. Thermoplastic elastomerwheels. Each wheel is 7/16˝ wide overallwidth is 2˝.SPECIFICATIONS• Wheel 3˝ dia. x 2˝ w. • Mount 4 bolt on• Load capacity 165 lbs. 2˝ x 1½˝ centers• Top plate 311/16˝ x 2½˝ • Bolt holes 5/16˝ dia.• Mounting height 4⅛˝ • Shpg. 1½ lbs.

Rubber Tire Casters• Cast iron wheels and rubber tires. All sizes have 4⅝˝ x 3⅞˝ top plate.

Rigid SwivelITEM Price ITEM Price Size Capacity Shpg.1-1720-R $9.00 1-1720-S $11.95 4˝ x 2˝ 350 lbs. 7 lbs.1-1770-R $9.95 1-1770-S $12.95 5˝ x 2˝ 450 lbs. 7 lbs.1-1721-R $10.95 1-1721-S $12.95 6˝ x 2˝ 500 lbs. 8 lbs.1-1722-R $13.95 1-1722-S $17.95 8˝ x 2˝ 600 lbs. 12 lbs.

Steel Wheel Casters• Steel wheel casters. All sizes have 4½˝ x 3⅞˝ top plate.

Rigid SwivelITEM Price ITEM Price Size Capacity Shpg.1-1991-R $11.95 1-1991-S $14.20 4˝ x 2˝ 900 lbs. 7 lbs.1-1780-R $13.95 1-1780-S $15.95 5˝ x 2˝ 900 lbs. 9 lbs.1-1781-R $16.95 1-1781-S $18.95 6˝ x 2˝ 900 lbs. 9 lbs.1-1782-R $20.95 1-1782-S $22.95 8˝ x 2˝ 900 lbs. 14 lbs.

4˝ to 8˝ Heavy Duty Casters

• Brand new. Heavy duty casters. Use on work tables, materialdollies, carts, etc. Grease zerks on swivels and axles. Rollerbearings.

Choose between steel wheel and rubber tired cast iron.Rigid Swivel Rigid Swivel

6˝ x 1¼˝ SwivelPlate Caster

with Brake

ITEM 1-4230$7.95

• New, ALBION Model 02PB06151S001swivel plate caster with brake. Nickelplated caster yoke. Solid polypropylenewheel. Derlin bushing in hub.SPECIFICATIONS • Mount 4 holes on• Wheel size 6˝ dia. x 1¼˝ 3⅜˝ to 3˝ x 2⅜˝ to 1¾˝• Load capacity 350 lbs. centers• Top plate 4⅛˝ x 3⅛˝ • Bolt holes ⅜˝ dia.• Mounting height 7⅜˝ • Shpg. 3 lbs.

6˝ x 1¼˝ SwivelPlate Casterwith Directional Lock

ITEM 1-4301$12.95• New, MEDCASTER Model SX06TPX -125DLTP13 swivel plate caster with direc-tional lock. Stainless steel yoke and topplate. Thermoplastic rubber tire.SPECIFICATIONS• Wheel size 6˝ dia. x 1¼˝ • Mount 4 bolt on• Load capacity 300 lbs. 215/16˝ x 1¾˝• Top plate 3¾˝ x 2¾˝ • Bolt holes 5/16˝ dia.• Mounting height 77/16˝ • Shpg. 3 lbs.

125mm x 32mm SwivelPlate Casterw/ Swivel Lock

ITEM 1-3287-A$6.99• New, RHOMBUS swivel plate caster.Metal lever single position swivel lock (doesnot lock wheel). Thermoplastic polyurethanewheel with plastic wheel center.SPECIFICATIONS• Wheel size • Mounting height 6⅜˝

125mm (5˝) x 32mm (1¼˝) • Mount 4 bolt on• Load capacity 1⅞˝ x 2⅞˝ ctrs.

100 kg or 220 lbs. • Bolt holes 5/16˝ diam.• Top plate 2¾˝ x 3¾˝ x ⅛˝ • Shpg. 3 lbs.

5˝ x 1½˝ SwivelPlateCaster

ITEM 1-4225$5.95• New ALBION Model 02XS05151S002swivel plate caster. Nickel plated casteryoke. X-tra-soft rubber tread tire on poly-olefin wheel. Derlin bushing insert in hub.SPECIFICATIONS • Mount 4 slots on• Wheel size 5˝ dia. x 1½˝ 3⅜˝ to 3˝ x 2⅜˝ to 1¾˝• Load capacity 325 lbs. centers• Top plate 4⅛˝ x 3⅛˝ • Bolt holes ⅜˝• Mounting height 61/16˝ • Shpg. 3 lbs.

5˝ x 1½˝ SwivelPlateCaster

ITEM 1-4226$5.95• New, ALBION Model 02XA05151S002swivel plate caster. Nickel plated casteryoke. Urethane tread on polyolefin wheel.Derlin bushing.SPECIFICATIONS • Mount 4 slots on• Wheel size 5˝ dia. x 1½˝ 3⅜˝ to 3˝ x 2⅜˝ to 1¾˝• Load capacity 350 lbs. centers• Top plate 4⅛˝ x 3⅛˝ • Bolt holes ⅜˝ dia.• Mounting height 6⅛˝ • Shpg. 3 lbs.

3˝ dia. x 113/16˝Swivel PlateCaster

ITEM 1-1195$3.99• Removed from service. FAULTLESS heavyduty swivel plate caster. Low profile design.Glass filled nylon wheel. Roller wheel bear-ing with swivel ball bearing plate.SPECIFICATIONS• Wheel size • Mounting height 331/32˝

3˝ diam. x 113/16˝ wide • Mount four bolt on• Load capacity 700 lbs. 3⅜˝ x 2⅜˝ centers• Top plate • Bolt holes 5/16˝ diam.

3⅛˝ x 4⅛˝ x 3/16˝ thick • Shpg. 3 lbs.

3˝ x 1¼˝ Adj. HeightSwivel PlateCaster

ITEM 1-4065$4.95• New JARVIS adjustable height swivelplate caster. Polyolefin wheel. Steel casteryoke. Travel in height 0.486˝.SPECIFICATIONS• Wheel size 3˝ dia. x 1¼˝ • Load capacity 180 lbs.• Top plate • Mount 4 bolt on

3¼˝ x 211/16˝ x 3/16˝ thick 2⅝˝ x 1⅛˝ centers• Mounting height • Bolt holes 5/16˝ dia.

5⅞˝ up to 6⅜˝ • Shpg. 3 lbs.

3˝ x 15/16˝ SwivelPlate Caster

w/Brake

ITEM 1-3445$3.99

• New, FAULTLESS swivel plate casterwith wheel lock. Solid polypropylene wheelwith plated steel yoke.SPECIFICATIONS• Wheel size 3˝ dia. x 15/16˝ • Mount four bolt on• Load capacity 110 lbs. 111/16˝ x 215/16˝ centers• Top plate 29/16˝ x 3⅝˝ • Bolt holes 5/16˝ diam.• Mounting height 3⅞˝ • Shpg. 1½ lbs.

2¾˝ x 1⅜˝ SwivelPlate CasterITEM 1-4263$3.95• New, ALBION Model 03PE03028S006swivel plate caster. Originally intended foreconomy air cargo containers. Zinc platedsteel yoke and plate. Polyurethane treadon polypropylene wheel.SPECIFICATIONS• Wheel 2¾˝ dia. x 1⅜˝ w. • Mount 2 bolt holes• Load capacity 400 lbs. on 3½˝ centers• Top plate diamond • Bolt holes 7/16˝ dia.• Mounting height 41/32˝ • Shpg. 2 lbs.

40.5mm x 17mmSwivelCasterITEM 1-331299¢• New, FAULTLESS swivel plate caster forfurniture. Polyurethane wheel. Brass finishyoke.SPECIFICATIONS• Wheel size 40.5mm x 17mm • Mount 4 bolt on• Load capacity 70 lbs. 26mm x 42mm ctrs.• Top plate 1½˝ x 2˝ x 3/32˝ • Bolt holes 7mm diameter• Mounting height 2˝ • Shpg. ¼ lb.

215/16˝ x ½˝ Dual WheelSwivel PlateCasterWith Brake

ITEM 1-425695¢• New, ALBION Model 202NY03041S001dual wheel swivel plate caster with wheellock. Solid nylon wheels.SPECIFICATIONS• Wheel size 215/16 ̋dia. x ½ ̋w. • Mount 4 holes on• Load capacity 100 lbs. 2˝ x 1⅝˝ centers• Top plate 2⅝˝ x 2⅝˝ • Bolt holes 5/16˝ dia.• Mounting height 3⅝˝ • Shpg. ¾ lb.

800-488-3407 Swivel Casters 187&

Swivel Plate CastersNew, mixed manufacturers plate mount swivel casters.

* Brake ** Directional Lock *** Brake and Directional Lock

ITEM Wheel Size Load Capacity Wheel Material Mtg. Height Shpg. Price1-4295 * 2½˝ x 13/16˝ 80 Soft Rubber 3⅛˝ ¾ lb. $1.951-4305 ** 3˝ x 1¼˝ 165 Thermo-plastic Rubber 47/16˝ 2 lbs. $8.951-4304 *** 3˝ x 1¼˝ 200 Thermo-plastic Rubber 4¼˝ 1½ lbs. $7.951-4312 * 3˝ x 1¼˝ 270 Polyolefin 313/16˝ 1½ lbs. $2.951-4347 3˝ x 1¼˝ 275 Polypropylene 3¾˝ 1½ lbs. $2.951-4249 3˝ x 111/16˝ 500 Polypropylene 4˝ 3 lbs. $4.951-4200 3½˝ x 1¼˝ 350 Hard rubber 411/16˝ 3 lbs. $3.951-4325 4˝ x 15/16˝ 140 Polyolefin 413/16˝ 1 lb. $1.951-4208 4˝ x 1¼˝ 150 Soft Rubber 5⅛˝ 3 lbs. $4.951-4213 4˝ x 1¼˝ 350 Polyolefin 53/16˝ 3 lbs. $4.951-4218 5˝ x 1¼˝ 175 Soft Rubber 6⅛˝ 3 lbs. $5.951-4204 * 5˝ x 1¼˝ 175 Soft Rubber 63/16˝ 4 lbs. $6.951-4299 *** 5˝ x 1¼˝ 280 Thermo-plastic Rubber 67/16˝ 2 lbs. $11.951-4229 * 5˝ x 1¼˝ 350 Polyolefin 63/16˝ 3 lbs. $5.951-4310 *** 6˝ x 1¼˝ 220 Polyurethane tread 7½˝ 3 lbs. $17.951-4298 *** 6˝ x 1¼˝ 300 Thermo-plastic Rubber 77/16˝ 2 lbs. $11.951-4215 6˝ x 1¼˝ 400 Polyolefin 7⅜˝ 3 lbs. $5.95

2⅝˝ x 1⅜˝ Swivel PlateAir CargoCaster

ITEM 1-4240$4.95• New, FAULTLESS Model P2461-25/8TG CT TAN WHL swivel plate air cargocaster. Corrosion resistant zinc dichro-mate plated yoke. Polyflex wheel. Needlewheel bearings.SPECIFICATIONS • Mount 6 bolt on• Wheel size 2⅝˝ dia. x 1⅜˝ 3⅜˝ x 1¼˝ to 25/16˝• Load capacity 375 lbs. centers• Top plate 4⅛˝ x 3⅛˝ • Bolt holes 5/16˝ & ⅜˝• Mounting height 325/32˝ • Shpg. 2 lbs.

2˝ x ¾˝ SwivelPlate Caster

ITEM 1-3283$1.39• New, swivel plate caster with hard plasticwheel. Swivel plate has double-row ballbearings. Wheel has a plain bore.SPECIFICATIONS• Wheel size 2˝ x ¾˝ • Mount 4 holes on• Load capacity 50 lbs. 11/16˝ x 2¼˝ centers• Top plate 1¾˝ x 3˝ x ⅛˝ • Bolt holes ¼˝• Mounting height 213/16˝ • Shpg. ½ lb.

Swivel PlateCasterw/ Brake

ITEM 1-3287$6.99• Used, RHOMBUS swivel plate caster.Thermoplastic polyurethane tire with plas-tic wheel. Plated steel yoke. Wheel brake.SPECIFICATIONS• Wheel size 5˝ dia. x 1¼˝ • Mounting height 6˝• Load capacity 220 lbs. • Mount 2⅞˝ x 1⅞˝• Top plate • Bolt holes 5/16˝ diam.

3¾˝ x 2¾˝ x ⅛˝ thick • Shpg. 3 lbs.

63/16˝ x 11/16˝Swivel PlateCastersw/ Brake

ITEM 1-4482 1-4487

• New RHOMBUS swivel plate casterswith wheel brake and swivel lock. Platedsteel rim, yoke and plate. Solid rubber tire.Roller bearings in hub.SPECIFICATIONS• Wheel size 63/16˝ dia. x 11/16˝• Mounting height 7¾˝• Load capacity 297 lbs. • Mount 4 holes on 4⅛˝ x 3˝• Top plate • Bolt holes 7/16˝ diam.

5⅜˝ x 45/16˝ • Shpg. 7 lbs.

ITEM 1-4482 $10.95• Model 441H07R160CZPK

ITEM 1-4487 $11.95• Model 441H08R160CZPK

4˝ x 1¼˝ RigidPlateCaster

ITEM 1-4201$3.95• New, ALBION Model DCRN04052R001rigid plate caster. Hard rubber wheel. Del-rin insert. Plated caster yoke.SPECIFICATIONS• Wheel 4˝ dia. x 1¼˝ w. • Mount 4 slotted on 3˝ x 1¾˝• Load capacity 350 lbs. to 3⅜˝ x 2⅜˝• Top plate 4⅛˝ x 3⅛˝ • Bolt holes ⅜˝ dia.• Mounting height 5⅛˝ • Shpg. 2 lbs.

3˝ x 1⅜˝ RigidPlateCasterITEM 1-3056-R$2.79• Used, general purpose rigid plate caster.Molded polypropylene wheel.SPECIFICATIONS • Mounting height 3⅞˝• Wheel size 3˝ dia. x 1⅜˝ • 4 bolt mount 3˝ x 1¾˝ ctrs.• Load capacity 200 lbs. • Bolt holes 5/16˝• Top plate 3¾˝ x 2¾˝ • Shpg. 2 lbs.

188 Rigid Plate Casters www.surpluscenter.com8

6˝ x 2˝ RigidPlate Caster

ITEM 1-3228$7.99• New, ER WAGNER rigid plate caster.Polyolefin wheel with thread guards. Plainbearing.SPECIFICATIONS• Wheel size 6˝ dia. x 2˝ • Mount 1¾˝ x 2⅝˝• Load capacity 400 lbs. slotted to 3˝• Top plate 2¾˝ x 3¾˝ • Bolt holes 5/16˝• Mounting height 7½˝ • Shpg. 3 lbs.


ITEM 1-3305$12.95• New, FAULTLESS rigid plate caster. “K-wheel” polyurethane tire. Zinc plated yoke.SPECIFICATIONS• Wheel size 6˝ x 2˝ • Mount four bolt• Load capacity 900 lbs. on 3⅝˝ x 3˝ centers• Top plate 3⅞˝ x 4½˝ • Bolt holes 7/16˝ dia.• Mounting height 7¼˝ • Shpg. 5 lbs.

6˝ x 2˝ RigidPlate Casterw/ Shock Absorber

ITEM 1-3313$19.95• New FAULTLESS rigid plate caster withspring action shock absorber. Glass fillednylon tire. Painted steel yoke. Com pres -sion action absorbs jolts and bumps.SPECIFICATIONS• Wheel size 6˝ x 2˝ • Mount four bolt on• Load capacity 1200 lbs. 4⅛˝ x 4½˝ centers• Top plate 5˝ x 5½˝ • Bolt holes ⅜˝ diam.• Mounting height 91/16˝ • Shpg. 10 lbs.

5˝ x 2˝ RigidPlateCasterITEM 1-4000-R$8.95• New, blue polyurethane on polyolefinwheel. 3/16˝ top plate and legs. Twin sealedball bearings with thread guards on axle.SPECIFICATIONS• Wheel size 5˝ dia x 2˝ wide • Mount 2⅝˝ x 3⅝˝• Load capacity 375 lbs. slotted to 3˝ x 3˝• Top plate 4˝ x 4½˝ • Bolt holes ⅜˝• Mounting height 6˝ • Shpg. 5 lbs.


ITEM 1-2271-R$10.99• New, FAULTLESS rigid plate caster. Steelconstruction with phenolic wheel. Ball bear-ings on wheel axle. Grease zerk on axle.SPECIFICATIONS • Top plate• Wheel 5˝ diam. x 2˝ 3⅞˝ x 4½˝ x ¼˝• Capacity 900 lbs. • Four bolt mount• Height from floor to 2⅝˝ x 3⅝˝ or 3˝ x 3˝ ctrs.

mtg. plate 6½˝ • Shpg. 6 lbs.

6˝ x 1¼˝ RigidPlate CasterITEM 1-3763$3.99• New, JARVIS rigid plate caster. Solidhardened rubber tread wheel. Plated steelcaster yoke.SPECIFICATIONS• Wheel size 6˝ dia. x 1¼˝ • Mount 4 bolt on• Load capacity 220 lbs. 3˝ x 1¾˝ centers• Top plate 3⅝˝ x 2⅜˝ • Bolt holes 5/16˝• Mounting height 7¼˝ • Shpg. 5 lbs.

Heavy DutyRigid PlateCaster YokeITEM 1-3303$1.49• New, FAULTLESS zinc plated steel rigidcaster yoke. Can accommodate casterwheel up to 8˝ in dia. and 2˝ wide. Insidewidth 2½˝, allows ½˝ dia. axles. Four ½˝ dia.bolt holes on 4½˝ x 4⅛˝ ctrs. Shpg. 4 lbs.

8˝ x 2˝ RigidPlateCasterITEM 1-3304-R$29.99• New FAULTLESS caster with spring ac-tion shock absorber. “SUPER K” poly ure -thane tire. Painted steel yoke. Compressionaction absorbs jolts and bumps.SPECIFICATIONS• Wheel size 8˝ x 2˝ • Mount four bolt on• Load capacity 1500 lbs. 4⅛˝ x 4½˝ centers• Top plate 5˝ x 5½˝ • Bolt holes ⅜˝ dia.• Mounting height 10⅜˝ • Shpg. 12 lbs

5˝ x 2˝ Steel Plate Casters

1-2275-R 1-2276-RSPECIFICATIONS• Steel frame • 5˝ diam. x 2˝ wide wheel• Four bolt mount on 3˝ x 3˝ or 2⅝˝ x 3⅝˝ ctrs.• 6½˝ from floor to plate top • Mtg. plate 4˝ x 4½˝ x ¼˝• Plastic wheel • Capacity 400 lbs.

ITEM Style Condition Shpg. Price 1-2275-R Rigid New 5 lbs. $7.95 1-2276-R Rigid New take-offs 5 lbs. $6.95

5˝ x 1⅛˝ RigidPlateCasterITEM 1-4333$5.95• New, JARVIS Model 5W1000025452F0Drigid plate caster. Nickel plated caster yokeand plate. Cushioned tread, solid rubberwheel with side plates.SPECIFICATIONS• Wheel size 5˝ dia. x 1⅛˝ • Mount 4 bolt holes on• Load capacity 200 lbs. 2⅞˝ x 1¾˝• Top plate 3⅝˝ x 2⅜˝ • Bolt holes 5/16˝ dia.• Mounting height 6¼˝ • Shpg. 3 lbs.

10˝ PneumaticRigid PlateCasterITEM 1-4045-R$16.95• New, pneumatic tire rigid plate castergives cushion ride for load with less floorwear.SPECIFICATIONS • Load capacity 300 lbs.• Tire 4.10x3.50-4 • Working height 11¼˝

pneumatic tire • Mtg. pattern 2⅝˝ x 3⅝˝• Diameter 10˝ slotted to 3˝ x 3˝• Pressure rating 30 lbs. • Mounting plate 3⅞˝ x 4½˝• Rigid plate caster. • Shpg. 7 lbs.

6˝ x 2˝ Rigid PlateCaster

ITEM 1-4067-R$10.95• New, JARVIS rigid plate caster with Tritonpolypropylene wheel. High load capacityZerk fittings on both wheel hub and thrubolt. Roller bearings on axle.SPECIFICATIONS• Wheel size 6˝ x 2˝ • Mount 2⅝˝ x 3⅝˝• Load capacity 1250 lbs. slotted to 3˝ x 3˝• Top plate 4˝ x 4½˝ • Bolt holes ⅜˝• Mounting height 7½˝ • Shpg. 6 lbs.

Find more casters onpage 192

800-488-3407 Rigid Plate & Swivel Stem Casters 189&

315/16˝ x ⅝˝ Dual WheelSwivel StemCasterw/Brake

ITEM 1-4161$5.95• New dual wheel swivel stem caster. Plas-tic wheel. Wheel brake.SPECIFICATIONS• Wheel size • Mounting height 415/16˝

315/16˝ dia. x ⅝˝ wide • Mount ½-13 x 9/16˝• Stem threaded • Shpg. 1½ lbs.

3˝ x 13/16˝ SwivelStem Caster

ITEM 1-4236$3.95• New, FAULTLESS Model EY4520R 3/8-16X5/8 swivel threaded stem caster. Zincplated yoke. Solid soft rubber wheel.SPECIFICATIONS• Wheel 3˝ dia. x 13/16˝ w. • Mounting height 319/32˝• Load capacity 90 lbs. • Mount ⅜˝-16 x ⅝˝ long• Stem threaded • Shpg. ¾ lb.

3˝ x 1¼˝ SwivelStem Caster

w/Brake

ITEM 1-3326$3.99

• New FAULTLESS swivel stem caster withbrake. Solid soft rubber wheel. Zinc platedsteel caster yoke.SPECIFICATIONS • Mounting height 3¾˝• Wheel size 3˝ x 1¼˝ • Stem threaded ½-13 x 1˝• Load capacity 175 lbs. • Shpg. 1½ lbs.

3˝ dia. x 1¼˝ Casters• New, Faultless 3˝ dia.x 1¼˝ casters. All have ball bearing swivels with ½˝-13 threadedstem mount and 3¾˝ mounting height. Choose from a wide variety of wheel construction,yoke material ,stem length and brake details. Shpg. 1½ lbs. each.

No Friction RollockBrake Brake Brake

$2.99 ea. $3.99 ea. $3.99 ea.Stem Wheel LoadLgth. Construction Frame Rating ITEM ITEM ITEM¾˝ Dyna Tred TPR Gray Zinc Plated 180 lbs. 1-3346¾˝ Dyna Tred TPR Gray Black Oxide 180 lbs. 1-3412¾˝ Soft Rubber on Plastic Wheel Black Oxide 175 lbs. 1-3339 1-3335¾˝ Solid Soft Rubber Zinc Plated 175 lbs. 1-3328 1-3409¾˝ Solid Soft Rubber Black Oxide 175 lbs. 1-3341¾˝ Solid Hard Rubber Zinc Plated 270 lbs. 1-3334¾˝ Solid Polypropylene Black Oxide 270 lbs. 1-3381 1-33791˝ Dyna Tred TPR Gray Zinc Plated 180 lbs. 1-3347 1-33771˝ Soft Rubber on Plastic Wheel Black Oxide 175 lbs. 1-33401˝ Solid Soft Rubber Zinc Plated 175 lbs. 1-3336 1-33271˝ Solid Polypropylene Zinc Plated 270 lbs. 1-3332 1-33451˝ Solid Polypropylene Black Oxide 270 lbs. 1-3338

1½˝ Dyna Tred TPR Gray Zinc Plated 180 lbs. 1-34081½˝ Soft Rubber on Plastic Wheel Black Oxide 175 lbs. 1-3363 1-33441½˝ Solid Soft Rubber Zinc Plated 175 lbs. 1-3331 1-33301½˝ Solid Polypropylene Zinc Plated 270 lbs. 1-3410 1-33251½˝ Solid Polypropylene Black Oxide 270 lbs. 1-3337 1-3407

Zinc plated, friction brake,solid polypropylene

Black oxide, rollock brake,solid soft rubber

Zinc plated, Zinc plated,solid hard rubber Dyna Tred

Rigid Plate CastersNew, mixed manufacturers plate mount rigid casters.

ITEM Wheel Size Load Capacity Wheel Material Mtg. Height Shpg. Price1-4317 2½˝ x 1⅛˝ 200 Polyolefin 33/16˝ 1 $ .951-4250 3˝ x 113/16˝ 500 Polypropylene 4˝ 2 $3.951-4707 3½˝ x 1¼˝ 225 Thermo-plastic Rubber 4¾˝ 1½ $1.991-4708 3½˝ x 1¼˝ 250 Polyurethane tread 4¾˝ 1½ $1.991-4270 3½˝ x 1¼˝ 300 Thermo-plastic Rubber 4⅞˝ 2 $2.951-4261 3½˝ x 1¼˝ 300 Thermo-plastic Rubber 4¾˝ 2 $1.951-4199 3½˝ x 1¼˝ 350 Hard rubber 4˝ 1½ $3.951-4252 3½˝ x 1¼˝ 360 Polyurethane tread 4⅞˝ 2 $5.951-4219 4˝ x 1¼˝ 150 Soft Rubber 5⅛˝ 2 $4.951-4210 4˝ x 1¼˝ 150 Soft Rubber 5⅝˝ 3 $4.951-4220 5˝ x 1½˝ 175 Soft Rubber 6⅛˝ 3 $4.951-4221 6˝ x 1¼˝ 200 Soft Rubber 7⅜˝ 4 $4.951-4223 4˝ x 1¼˝ 300 Polyolefin 5⅛˝ 2 $4.951-4274 4˝ x 1¼˝ 325 Thermo-plastic Rubber 51/16˝ 2 $2.951-4323 4˝ x 15/16˝ 350 Polyolefin 5˝ 2 $1.951-4209 4˝ x 1⅝˝ 350 Hard rubber 4¾˝ 3 $3.951-4211 5˝ x 1¼˝ 175 Soft Rubber 6⅛˝ 3 $4.951-4259 5˝ x 2˝ 400 Thermo-plastic Rubber 6½˝ 4 $4.951-4227 6˝ x 1¼˝ 310 Polypropylene 7⅜˝ 3 $4.951-4212 6˝ x 1¼˝ 200 Soft Rubber 7⅜˝ 4 $4.95

5˝ x 1¼˝ SwivelStemCasterITEM 1-4033$4.99• New, swivel stem caster. Plastic yokeand wheel plates. Thermoplastic rubberwheel.SPECIFICATIONS• Wheel size 5˝ dia. x 1¼˝ • Mounting height 6¼˝• Load capacity 250 lbs. • Mount ½-13 x 1½˝ long• Stem threaded • Shpg. 2 lbs.

4˝ x 1˝ Grip RingCaster

ITEM 1-3766$2.99• New, JARVIS swivel grip ring stemcaster. Solid polyolefin wheel. Plated steelcaster yoke.SPECIFICATIONS• Wheel size 4˝ dia. x 1˝ • Stem grip ring• Load capacity 150 lbs. 0.845˝ dia. x 2˝• Mounting height 4⅝˝ • Shpg. 3 lbs.

5˝ SwivelStemCasterITEM 1-2785$1.95• New, MHS brand caster. Soft rubber overplastic wheel for quiet, non-marking oper-ation. Ball bearings on swivel. Zinc platedsteel construction.SPECIFICATIONS • 5/16˝ diam. axle• 5˝ diam. x 15/16˝ w. wheel • 315/16˝ swivel radius• 125 lb. load capacity • 523/32˝ height• 7/16˝ diam. x 2˝ long (floor to base of stem)

stem with grip ring • Shpg. 1½ lbs.

3˝ x 1¼˝ SwivelStem CasterITEM 1-3329$2.99• New, FAULTLESS swivel stem caster.Solid hard rubber wheel. Zinc plated steelcaster yoke.SPECIFICATIONS • Mounting height 3¾˝• Wheel size 3˝ x 1¼˝ • Stem threaded ½-13 x ¾˝• Load capacity 270 lbs. • Shpg. 1½ lbs.

190 Swivel Stem & Grip Ring Casters www.surpluscenter.com86˝ x 1¼˝ SwivelStemCasterITEM 1-4300$4.95• New, SHEPARD Model PZS60748GR-TPR33(GG) swivel stem caster. Plasticyoke. Thermoplastic rubber wheel tread.SPECIFICATIONS• Wheel size 6˝ dia. x 1¼˝ • Mounting height 7⅜˝• Load capacity 300 lbs. • Mount ½-13 x 1½˝ thread• Stem threaded • Shpg. 3 lbs.

4¾˝ x 1˝ SwivelCasterw/ Swivel Lock

ITEM 1-3257$4.99• New, swivel caster rubber tire on plasticwheel. Chemical, water, salt and oil resistantnon-marking wheel. Plastic yoke with a 1⅛˝long metal insert where a bolt passes thruthe yoke and swivel. Two position swivellock, 180° offset. Shipped with the wheelunattached to yoke for easier installation.SPECIFICATIONS• Wheel size 4¾˝ dia. x 1˝ • Mounting height 6½˝• Mounting bore ½˝ diam. • Size 5⅞˝ x 6½˝ x 2¼˝• Load capacity 275 lbs. • Shpg. 2 lbs.

5˝ x 1¼˝ SwivelSquare StemCasterITEM 1-4251$4.95• New, ALBION Model 02XS05051S004swivel square stem caster. X-tra soft rub-ber flat tread. Delrin bushing. Plated casteryoke.SPECIFICATIONS • Mount square ⅞˝ x 1¾˝• Wheel size 5˝ dia. x 1¼˝ w. long stem w/ 2 bolt holes• Load capacity 325 lbs. • Bolt holes ¼˝ dia.• Square stem • Shpg. 2 lbs.

3˝ x 1¼˝ StemSwivelCaster

ITEM 1-2404$5.99• New. Swivel stem caster with 3˝ diam. x1¼˝ wide solid polypropylene wheel. 1˝-12diam. x 5⅛˝ threaded stem. Working height4¼˝ (floor to base of stem). Load capacity100 lbs. Shpg. 5 lbs.

4˝ x 15/16˝ ExpandingSwivel StemCaster

ITEM 1-4328$2.95• New, JARVIS Model FG427201E swivelexpanding stem caster. Rubber bushingexpands inside of 1½˝ ID tubing with a nutbeneath lower raceway. Zinc plated steelframe. Ball bearing swivel. Plain hub, nobearings. Thermoplastic rubber tire onpolyolefin core. Thread dimension ½˝-13thread 2⅜˝ long.SPECIFICATIONS• Wheel 4˝ dia. x 15/16˝ width • Mounting height 4⅝˝• Load capacity 125 lbs. • Mount fits 1½˝ ID tubing• Stem expanding stem • Shpg. 2 lbs.

Grip Ring Caster Sockets

1-3667 1-3668 1-3832

• Brand new, use to mount grip ring cast-ers with 7/16˝ dia. stem into steel tubing.Shpg. 1/10 lb.ITEM Fits into Length Price1-3667 1˝ OD 16 gauge tubing 1½˝ $ .351-3668 ¾˝ OD 16 gauge tubing 1½˝ $1.501-3832 ⅝˝ ID Square tubing 2⅛˝ $ .50

5˝ x 1½˝ SwivelStemCasterw/ Swivel & Wheel Lock

ITEM 1-3311$19.99• New, FAULTLESS swivel stem caster.Originally intended for scaffold. Swivel andwheel lock. Solid hard rubber wheel. Zincplated steel yoke.SPECIFICATIONS• Wheel size 5˝ x 1½˝ • Stem friction grip stem• Load capacity 325 lbs. mount 1˝ dia. x 2½˝• Mounting height 6¼˝ • Shpg. 6 lbs.

5˝ x 1⅛˝ SwivelStem Caster

ITEM 1-1591$6.95• New. Ball bearing swivel stem caster with5˝ diam. x 1⅛˝ wide cushion rubber wheel.7/16˝ diam. x 1½˝ stem with retention ring.150 lb. capacity. Shpg. 4 lbs.

3˝ x 13/16˝Rigid StemCasterITEM 1-3394$1.99• New, FAULTLESS rigid stem caster.“DYNA-TRED II” thermoplastic rubber onpolypropylene. Zinc plated caster yoke.SPECIFICATIONS • Mounting height 3½˝• Wheel size 3˝ x 13/16˝ • Stem grip ring 7/16˝ dia. x 2˝• Load capacity 90 lbs. • Shpg. 1 lb.

3˝ x 25/16˝ GripRing Casterwith Wheel AndSwivel Lock

ITEM 1-4302$3.95• New, MEDCASTER Model TM03PYO -281 TLGR02 swivel grip ring stem casterwith swivel and wheel lock. Polyurethanewheel tread. Twin caster wheels are ⅜˝wide the combined wheel width is 25/16˝.SPECIFICATIONS• Wheel 3˝ dia. x 25/16˝ w. • Mounting height 3¾˝• Load capacity 165 lbs. • Mount 7/16˝ dia. x 17/16˝• Stem grip ring • Shpg. 1 lb.

800-488-3407 Grip Ring Casters 191&

Faultless Grip Ring Stem Casters• New, FAULTLESS grip ring stem casters. All have ball bearing swivels. Choosefrom a wide variety of wheel construction, yoke material and with or without brakes.

• Dual brakes lock both the swivel and wheel

• Dyna Tred II and TPR are thermoplastic rubber on polypropylene wheel

Grip Ring Stem CastersNew, mixed manufacturers grip ring stem casters.

* Brake

** Directional Lock

*** Brake and Directional Lock

ITEM Wheel Size Load Capacity Wheel Material Stem Size Mtg. Height Shpg. Price1-4293 2˝ x 13/16˝ 80 Thermo-plastic Rubber 7/16˝ x 1˝ 2⅝˝ ½ $1.951-4294 * 2½˝ x 13/16˝ 80 Soft Rubber ⅜˝ x 1˝ 3⅛˝ ¾ $1.951-4291 * 2½˝ x 13/16˝ 80 Thermo-plastic Rubber 7/16˝ x 17/16˝ 3⅛˝ ¾ $1.991-4242 * 3˝ x 1¼˝ 175 Soft Rubber 7/16˝ x 17/16˝ 3¾˝ 1½ $2.951-4324 4˝ x 15/16˝ 140 Polyolefin 7/16˝ x 1½˝ 4⅝˝ 1 $1.951-4233 * 4˝ x 15/16˝ 140 Polypropylene 7/16˝ x 1½˝ 4⅝˝ 1½ $3.951-4232 * 5˝ x 15/16˝ 125 Thermo-plastic Rubber 7/16˝ x 117/32˝ 5⅝˝ 1½ $3.951-4319 5˝ x 15/16˝ 150 Polyolefin 7/16˝ x 1½˝ 5⅝˝ 1 $2.951-4307 ** 5˝ x 1¼˝ 275 Antimicrobial Thermo-plastic Rubber 7/16˝ x 17/16˝ 65/16˝ 2 $18.951-4297 *** 5˝ x 1¼˝ 280 Thermo-plastic Rubber 7/16˝ x 1¼˝ 6⅜˝ 2 $5.951-4296 * 5˝ x 1¼˝ 315 Urethane 7/16˝ x 17/16˝ 6⅛˝ 3 $4.95

Wheel Stem Stem Wheel Mounting LoadITEM Dia. Width Dia. Length Construction Brake Frame Height Rating Shpg. Price

1-3353 3˝ 13/16˝ 7/16˝ 1⅜˝ Dyna Tred II Gray No Zinc Plated 3½˝ 90 lbs. 1 lb. $1.991-3306 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid hard rubber Yes Zinc Plated 3¾˝ 270 lbs. 2 lbs. $3.991-3356 3˝ 1¼˝ 7/16˝ 1⅜˝ Soft rubber on plastic wheel Yes Black Oxide 3¾˝ 175 lbs. 1½ lbs. $2.991-3355 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Polypropylene Yes Zinc Plated 3¾˝ 270 lbs. 1½ lbs. $3.991-3352 3˝ 1¼˝ 7/16˝ 1⅜˝ Soft rubber on plastic wheel Yes Black Oxide 3¾˝ 175 lbs. 1½ lbs. $2.991-3351 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Polypropylene No Black Oxide 3¾˝ 270 lbs. 1½ lbs. $1.991-3350 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Polypropylene No Zinc Plated 3¾˝ 270 lbs. 1½ lbs. $2.991-3348 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Soft Rubber No Zinc Plated 3¾˝ 175 lbs. 1½ lbs. $1.991-3374 3˝ 1¼˝ 7/16˝ 1⅜˝ Dyna Tred TPR Black Yes Black Oxide 3¾˝ 180 lbs. 1½ lbs. $2.991-3371 3˝ 1¼˝ 7/16˝ 1⅜˝ Dyna Tred TPR Black No Black Oxide 3¾˝ 180 lbs. 1½ lbs. $1.991-3368 3˝ 1¼˝ 7/16˝ 1⅜˝ Dyna Tred TPR Gray Yes Zinc Plated 3¾˝ 180 lbs. 1½ lbs. $2.991-3401 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Polypropylene Yes Black Oxide 3½˝ 270 lbs. 1½ lbs. $2.991-3388 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Soft Rubber Yes Zinc Plated 3½˝ 175 lbs. 1½ lbs. $2.991-3386 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Soft Rubber Yes Zinc Plated 3½˝ 175 lbs. 1½ lbs. $2.991-3362 4˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred II Gray Yes Zinc Plated 4⅝˝ 115 lbs. 1½ lbs. $3.991-3361 4˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred II Black Yes Zinc Plated 4⅝˝ 115 lbs. 1½ lbs. $4.991-3372 4˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred TPR Gray No Zinc Plated 4⅝˝ 115 lbs. 1½ lbs. $2.991-3366 4˝ 15/16˝ 7/16˝ 1⅜˝ Solid Soft Rubber No Zinc Plated 4⅝˝ 115 lbs. 1½ lbs. $2.991-3367 4˝ 15/16˝ 7/16˝ 2˝ Dyna Tred TPR Gray Yes Zinc Plated 4⅝˝ 115 lbs. 1½ lbs. $3.991-3415 4˝ 15/16˝ 7/16˝ 2˝ Dyna Tred TPR Gray Yes Zinc Plated 4⅝˝ 115 lbs. 1½ lbs. $3.991-3349 5˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred II Black No Zinc Plated 5⅝˝ 125 lbs. 1½ lbs. $2.991-3360 5˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred II Gray Yes Zinc Plated 5⅝˝ 125 lbs. 1½ lbs. $3.991-3385 5˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred TPR Gray Yes Zinc Plated 5⅞˝ 125 lbs. 1½ lbs. $3.991-3387 5˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred TPR Black Yes Zinc Plated 5¾˝ 125 lbs. 1½ lbs. $3.99

18x8.50-8Turf TireAnd Wheel

ITEM 1-5022$21.95• New take-offs, WANDA turf tire on blacksteel rim. Not for Highway Service.SPECIFICATIONS• Size 18x8.50-8 • Ball bearing• O.D. 17¾˝ • Tubeless• Tread turf • Load rating• Tread width 7½˝ 815 lbs. at 22 PSI• Hub ¾˝ bore x • Ply rating 4

31/16˝ wide • Ply material nylon• Hub type offset • Shpg. 17 lbs.

ITEM 1-5022-2 $39.95• Sold as a pair of ITEM 1-5022 above.Shpg. 34 lbs.

ITEM 1-5022-P $360.00• Pallet quantity includes 24 pieces ofITEM 1-5022 above. Special price of$15.00 each. Shpg. 400 lbs.

192 Wheels & Casters www.surpluscenter.com8

20x8.00-10Turf Tire

ITEM 1-5031$14.95• New take-offs, WANDA P332-04 turf tire.Not for Highway Service.SPECIFICATIONS• Size 20x8.00-10 • Load rating• O.D. 19¾˝ 895 lbs. at 24 PSI• Tread turf • Ply rating 4• Tread width 7⅞˝ • Ply material nylon• Tubeless • Shpg. 14 lbs.


ITEM 1-5031-P $270.00• Pallet quantity includes 30 pieces ofITEM 1-5031 above. Special price of $9.00each. Shpg. 410 lbs.

18x8.50-8Turf Tire

ITEM 1-5032$11.95• New take-offs, WANDA turf tire. Not forHighway Service.SPECIFICATIONS• Size 18x8.50-8 • Load rating• O.D. 17¾˝ 815 lbs. at 22 PSI• Tread turf • Ply rating 4• Tread width 7½˝ • Ply material nylon• Tubeless • Shpg. 11 lbs.


ITEM 1-5032-P $270.00• Pallet quantity includes 36 pieces ofITEM 1-5032 above. Special price of $7.50each. Shpg. 370 lbs.


ITEM 1-5021$27.95• New take-offs, WANDA P332-04 turf tire onblack 4 bolt steel rim. Not for Hwy Service.SPECIFICATIONS• Size 20x8.00-10 • Backspace 4⅛˝• O.D. 18¾˝ • Tubeless• Tread Turf • Load rating 895 lbs. at 24 PSI• Tread width 7⅞˝ • Pressure less than 36 PSI• Mount • Ply rating 4

4 hole on 4˝ B.C. • Ply material nylon2¾˝ dia. pilot • Shpg. 21 lbs.


ITEM 1-5021-P $432.00• Pallet quantity includes 24 pieces ofITEM 1-5021 above. Special price of$18.00 each. Shpg. 540 lbs.

8 x 1.75 Semi-PneumaticWheelAssembly

ITEM 1-3994$3.99• New, semi-pneumatic tire on red pow-der-coated steel wheel. Centered hub. Ballbearings.SPECIFICATIONS• Size 8 x 1.75 • Load rating 80 lbs.• O.D. 8˝ • Bore ½˝ dia.• Tread ribbed • Bore thru-length 2˝• Tread width 1¼˝ • Shpg. 3 lbs.

7¾˝ x 2˝PlasticWheelITEM 1-4019$1.99• New, rubber tire on plastic wheel.SPECIFICATIONS • Bore ½˝ dia.• Size 7¾˝ dia. x 2˝ wide • Bore thru-length 1⅝˝• Tread bar-rib • Shpg. 3 lbs.

Threaded Stem CastersNew, mixed manufacturers threaded stem casters.

* Brake ** Brake and Directional Lock

Wheel Load Wheel Stem Size & Mtg.ITEM Size Capacity Material Thread Height Shpg. Price1-4346 2˝ x 111/16˝ 150 Polypropylene 1½˝-13 x 1˝ 211/16˝ ¾ $ .891-4271 3˝ x 15/16˝ 75 Rubber ⅜˝-16 x 19/16˝ 3¾˝ 1½ $3.951-4245 * 3˝ x 1¼˝ 175 Soft Rubber ½˝-13 x 1½˝ 313/16˝ 1½ $3.951-4246 * 3˝ x 1¼˝ 270 Polypropylene ½˝-13 x 1½˝ 313/16˝ 1 $3.951-4332 4˝ x 1¼˝ 275 Polyurethane Tread ⅝˝-18 x 3⅝˝ 4⅝˝ 1½ $1.951-4315 5˝ x 15/16˝ 125 Thermo-plastic Rubber ½˝-13 x 1½˝ 523/32˝ 1 $2.951-4234 5˝ x 15/16˝ 150 Polypropylene ½˝-13 x 1½˝ 513/16˝ 1½ $3.951-4320 5˝ x 15/16˝ 150 Polyolefin ½˝-13 x 1½˝ 523/32˝ 1 $2.951-4321 5˝ x 15/16˝ 150 Polyolefin ½˝-13 x 1½˝ 523/32˝ 1½ $3.95

5˝ x 15/16˝ SwivelStem

Casterw/ Wheel Lock

ITEM 1-3307$5.99

• New FAULTLESS swivel stem caster withwheel lock. Thermoplastic tire on blackpolypropylene wheel.SPECIFICATIONS • Mounting height 5¾˝• Wheel size 5˝ x 15/16˝ • Stem threaded ½˝-13 x 1½˝• Load capacity 125 lbs. • Shpg. 1½ lbs.

2˝ Dual Wheel SwivelPlate Casters

1-4928 1-4892

• New, general purpose dual wheel swivelplate caster with brake. Zinc plated body.

ITEM 1-4928 $1.39SPECIFICATIONS • Hard rubber wheel• Wheels 2˝ dia. x 13/16˝ w. • Mounting holes• Load capacity 200 lbs. 1¾˝ x 2⅞˝ - 3˝ slotted• Top plate 3¾˝ x 2¾˝ • Bolt size 5/16˝• Mounting height 213/16˝ • Shpg. 1¾ lbs.

ITEM 1-4892 $1.39SPECIFICATIONS • Polyolefin wheel• Wheels 2˝ dia. x 13/16˝ w. • Mounting holes• Load capacity 200 lbs. 1¾˝ x 2⅞˝ - 3˝ slotted• Top plate 3¾˝ x 2¾˝ • Bolt size 5/16˝• Mounting height 213/16˝ • Shpg. 1¾ lbs.



Special Pricing on Wanda Turf Tires!!

800-488-3407 Just Arrived! 193&

Remote Stroke Control Valve

ITEM 9-8428 $59.95• Brand new, PRINCE Model PM-SC-10 re-mote stroke control valve. Intended for depthlimiting applications, tillage, fertilizers or seedplanters. Intended for controlling rephasing hydrauliccylinders only. The valve closing is initiated using a me-chanical, 30-50 lb. spring loaded striker plate. Valve closes to pre-vent return flow.SPECIFICATIONS• Ports SAE 8 • Max. pressure 3000 PSI • Size 3¼˝ x 1½˝ x 3˝• Max. flow 15 GPM • Mount two, 21/64˝ dia. holes 2⅛˝ ctrs. • Shpg. 4 lbs.

Rod Port Retracted Rod Base Pin ITEM Stroke PSI Dia. Ports Orientation Lgth. Width Width Holes Shpg. Price

9-8731-2-12 12˝ 3000 1⅛˝ SAE 8 B 22¼˝ 2½˝ 2⅜˝ 1˝ 20 lbs. $58.959-8731-2-16 16˝ 3000 1⅛˝ SAE 8 B 26¼˝ 2½˝ 2⅜˝ 1˝ 23 lbs. $62.959-8735-2-16 16˝ 2500 1⅛˝ ⅜˝ NPT B 26¼˝ 2¼˝ 2¼˝ 1˝ 20 lbs. $57.959-8731-2-20 20˝ 3000 1⅛˝ SAE 8 B 30¼˝ 2½˝ 2⅜˝ 1˝ 26 lbs. $71.959-8735-2.5-10-A 10˝ 2500 1⅛˝ SAE 8 A 20¼˝ 2¼˝ 2¼˝ 1˝ 19 lbs. $46.959-8731-2.5-14 14˝ 3000 1⅛˝ SAE 8 B 24¼˝ 2½˝ 2½˝ 1˝ 25 lbs. $67.959-8735-2.5-14 14˝ 2500 1⅛˝ ⅜˝ NPT A 24¼˝ 2¼˝ 2¼˝ 1˝ 21 lbs. $61.959-8735-2.5-14-A 14˝ 2500 1⅛˝ SAE 8 A 24¼˝ 2¼˝ 2¼˝ 1˝ 21 lbs. $62.959-8731-2.5-16 16˝ 3000 1¼˝ SAE 8 B 26¼˝ 2½˝ 2½˝ 1˝ 27 lbs. $71.959-8735-2.5-16-B 16˝ 2500 1⅛˝ SAE 8 A 26¼˝ 2¼˝ 2¼˝ 1˝ 23 lbs. $63.959-8735-2.5-16 16˝ 2500 1⅛˝ SAE 8 A 26¼˝ 2¼˝ 2¼˝ 1˝ 23 lbs. $55.959-8733-2.5-18 18˝ 2500 1¼˝ ⅜˝ NPT A 28¼˝ 2½˝ 2½˝ 1˝ 33 lbs. $70.959-8735-2.5-18-A 18˝ 2500 1¼˝ SAE 8 B 28¼˝ 2¼˝ 2¼˝ 1˝ 26 lbs. $65.959-8731-2.5-18 18˝ 3000 1¼˝ SAE 8 B 28¼˝ 2½˝ 2½˝ 1˝ 29 lbs. $78.959-8735-2.5-18 18˝ 2500 1¼˝ ⅜˝ NPT A 28¼˝ 2¼˝ 2¼˝ 1˝ 26 lbs. $58.959-8731-2.5-20 20˝ 3000 1¼˝ SAE 8 B 30¼˝ 2½˝ 2½˝ 1˝ 31 lbs. $80.959-8735-2.5-20-A 20˝ 2500 1⅛˝ SAE 8 A 30¼˝ 2¼˝ 2¼˝ 1˝ 32 lbs. $72.959-8731-2.5-36 36˝ 3000 1¼˝ SAE 8 B 46¼˝ 2½˝ 2½˝ 1˝ 45 lbs. $107.959-8731-2.5-48 48˝ 3000 1¼˝ SAE 8 B 58¼˝ 2½˝ 2½˝ 1˝ 56 lbs. $127.959-8735-3-8 8˝ 2500 1¼˝ SAE 8 B 20¼˝ 2¼˝ 2¼˝ 1˝ 22 lbs. $51.959-8735-3-8-B 8˝ 2500 1¼˝ ½˝ NPT B 20¼˝ 2¼˝ 2¼˝ 1˝ 22 lbs. $58.959-8735-3-10 10˝ 2500 1¼˝ ½˝ NPT B 20¼˝ 2¼˝ 2¼˝ 1˝ 23 lbs. $53.959-8735-3-10-C 10˝ 2500 1¼˝ SAE 8 A 20¼˝ 2¼˝ 2¼˝ 1˝ 23 lbs. $62.959-8731-3-14 14˝ 3000 1¼˝ SAE 8 B 24¼˝ 2⅝˝ 29/16˝ 1˝ 34 lbs. $75.959-8735-3-14 14˝ 2500 1¼˝ SAE 8 A 24¼˝ 2¼˝ 2¼˝ 1˝ 27 lbs. $60.959-8731-3-16 16˝ 3000 1¼˝ SAE 8 B 31½˝ 2⅝˝ 29/16˝ 1¼˝ 40 lbs. $92.959-8735-3-18 18˝ 2500 1¼˝ ½˝ NPT A 28¼˝ 2¼˝ 2¼˝ 1˝ 30 lbs. $66.959-8735-3-18-A 18˝ 2500 1¼˝ SAE 8 A 28¼˝ 2¼˝ 2¼˝ 1˝ 30 lbs. $72.959-8731-3-20 20˝ 3000 1½˝ SAE 8 B 30¼˝ 2⅝˝ 29/16˝ 1˝ 43 lbs. $94.959-8733-3.5-4 4˝ 2500 1¼˝ ½˝ NPT A 14¼˝ 2⅝˝ 29/16˝ 1˝ 32 lbs. $81.959-8731-3.5-10 10˝ 3000 1¼˝ SAE 8 B 20¼˝ 2⅝˝ 29/16˝ 1˝ 37 lbs. $87.959-8731-3.5-14 14˝ 3000 1½˝ SAE 8 B 24¼˝ 2⅝˝ 29/16˝ 1˝ 45 lbs. $103.959-8731-3.5-16 16˝ 3000 1½˝ SAE 8 B 31½˝ 2⅝˝ 29/16˝ 1¼˝ 50 lbs. $109.959-8731-3.5-18 18˝ 3000 1½˝ SAE 8 B 28¼˝ 2⅝˝ 29/16˝ 1˝ 49 lbs. $109.959-8731-3.5-48 48˝ 3000 1½˝ SAE 8 A 58¼˝ 2⅝˝ 29/16˝ 1˝ 95 lbs. $184.959-8729-3.5-48 48˝ 3000 1½˝ SAE 8 A 58¼˝ 2⅝˝ 29/16˝ 1˝ 95 lbs. $178.959-8735-4-10 10˝ 2500 1¼˝ ½˝ NPT A 20¼˝ 2¼˝ 2¼˝ 1˝ 34 lbs. $80.959-8731-5-8 8˝ 3000 2˝ SAE 8 B 20¼˝ 3˝ 3½˝ 1¼˝ 75 lbs. $172.959-8729-5-14 14˝ 3000 2˝ SAE 8 A 26¼˝ 3˝ 3½˝ 1¼˝ 89 lbs. $195.959-8729-5-48 48˝ 3000 2˝ SAE 8 A 60¼˝ 3˝ 3½˝ 1¼˝ 139 lbs. $308.95

Bore

2˝

2½˝

3˝

3½˝

4˝

5˝

Lion Tie-Rod Hydraulic Cylinders• New LION HYDRAULICS double acting tie-rod cylinders. Base endhas two ports with one port steel plugged and rod end has one port.

Port orientation is indicated by letter code:

A = Ports inline with clevis pins

B = Ports 90° to clevis pins

2¾˝ x 8˝ x 1⅛˝

ITEM 9-8734 $90.95• New, Lion Hydraulics TP 3000 Series rephasing, tie-rod cylinder.Ships with two sets of pins and cotters.SPECIFICATIONS• Model 27TP08-112 ASAE • Rod dia. 1⅛˝ • Clevis ends• Double acting, rephasing • Ports SAE 8 rod 2½˝ wide,• Bore x Stroke 2¾˝ x 8˝ • Retracted lgth. 20¼˝ base 29/16˝ wide• Pressure 3000 PSI max. • Shpg. 27 lbs. • Pin holes 1˝

120 VAC/24 VDC Smartbox Wind Turbine Controller

ITEM 6-1023 $249.95• NEW WINDTRONICS WT6K095 SMARTBOX controllerfor HONEYWELL WT6500 wind turbine generators. TheSMARTBOX controller consists of a charge controller anda non-grid-tie COTEK model SK1500-124 pure sine wave1500 watt inverter. Included within the charge controller isan automatic AC transfer switch that will automaticallyswitch between your AC grid and power generated via theturbine. All components mounted in a steel enclosure. Useas is or utilize components to custom build solar/wind tur-bine charging systems. Instruction manual included.SPECIFICATIONSInput Charging Circuit• Turbine voltage 200 VDC max. • Nominal voltage output 24 VDC• Operating voltage range 30-170 VDC • Charger output operating voltage range 12-30 VDC• Current 18 max. • Power continuous output 1500 watts DCInverter • Amperage cont. output current 60 amps DC max.• Voltage IN 24 VDC • Voltage Out 120 VAC Enclosure• Amerage output 12.5 amps AC • Size 20˝ x 8˝ x 20˝• Power output 1500 watts • Shpg. 68 lbs.

Coil-over Shock AbsorberAssembly

ITEM 28-1907 $11.95• New takeoffs, oil filled coil-over shockabsorber assembly. Five-way adjustableride height settings. Chrome plated bodywith painted spring.SPECIFICATIONS • Stroke 2⅛˝• Extended lgth. 12½˝ • Mtg. hole upper 7/16˝• Spring size • Mtg. hole lower ⅜˝

23/16˝ dia. x 8⅛˝ • Mtg. hole width 53/64˝installed on middle • Size 2¼˝ dia. x 13¾˝setting when extended • Shpg. 4 lbs.

12 Volt DC LEDHeadlightITEM 12-1037$4.95• New, takeoffs single LED headlight fromriding mowers. No mounting hardware.Some minor scuffing on lens from handling.SPECIFICATIONS • Black aluminum housing• Voltage 12 VDC • Mount two tabs,• Current 0.35 amps 1˝ gap, ¼˝ holes• Lens 2¼˝ dia. • Size 3⅝˝ dia. x 2½˝• Leads 6˝ with connector half • Shpg. 1 lb.

194 Just Arrived! www.surpluscenter.com8Treadmill Motors

• New, Icon Health and Fitness, permanent magnet motors. Built for use in treadmills, ideal for use with speed con-troller (sold separately). Would also make an excellent DC generator. Open frame, treadmill duty, reversible rotation.

Motors with Flywheel Motors with Front Flange

Treadmill Motors With Flywheel All shafts are 17mm dia. All have 10 groove pulleyDC Shaft Integral

ITEM Model HP Voltage Amps RPM Lgth. Flywheel Fan Size Shpg. Price10-3034 F-237595 2.25 130 12.9 5135 44mm 6⅜˝ dia. with 31mm O.D. Yes 9¾˝ x 6⅜˝ O.D. 23 lbs. $45.9510-3027 F-295739 4.25 130 24.4 5225 41mm 6¾˝ dia. with 1¾˝ O.D. Yes 12½˝ x 6¾˝ O.D. 33 lbs. $69.9510-3032 F-286340 2.8 130 16.1 4135 43.5mm 6⅝˝ dia. with 38mm O.D. Yes 11˝ x 6⅝˝ O.D. 30 lbs. $49.9510-3033 M-184002 3 120 22.1 2975 54mm 7˝ dia. with 2.10˝ O.D. No 12⅜˝ x 7˝ O.D. 35 lbs. $51.9510-3038 F-280159 3.5 130 20.1 4175 52mm 6½˝ dia. with 1.20˝ O.D. Yes 12¼˝ x 6½˝ O.D. 33 lbs. $58.9510-3035 F-255717 4.25 130 24.4 5110 41mm 6¾˝ dia. with 1¾˝ O.D. No 12⅜˝ x 6¾˝ O.D. 33 lbs. $69.9510-3037 M-217250 2.5 130 14.3 4090 33mm 6⅜˝ dia. with 1½˝ O.D. Yes 12˝ x 6⅜˝ O.D. 32 lbs. $48.9510-3029 F-286339 2.5 130 14.3 4875 33mm 6⅜˝ dia. with 31mm O.D. Yes 9¾˝ x 6⅜˝ O.D. 23 lbs. $48.9510-3052 M-326339 4.25 130 24.4 5385 34mm 6¾˝ dia. with 31mm O.D. Yes 12⅜˝ x 6¾˝ O.D. 32 lbs. $69.9510-3044 M-208012 2 130 14.3 5650 48mm 6⅜˝ dia. with 1.10˝ O.D. No 10⅜˝ x 6⅜˝ O.D. 35 lbs. $39.9510-3048 F-309513 3 130 17.2 5265 41mm 6¾˝ dia. with 31mm O.D. Yes 11⅜˝ x 6¾˝ O.D. 30 lbs. $42.9510-3040 M-193022 3 130 22.1 2975 54mm 7˝ dia. with 2.10˝ O.D. No 12⅜˝ x 7˝ O.D. 34 lbs. $42.9510-3043 M-164560 2.5 130 17.6 3050 54mm 7˝ dia. with 1¾˝ O.D. No 11⅞˝ x 7˝ O.D. 31 lbs. $48.95

Treadmill Motors With Front Flange All shafts are 17mm dia.DC Shaft Front

ITEM Model HP Voltage Amps RPM Lgth. Flange Size Shpg. Price10-3036 M-189076 2.25 95 18 6025 43mm 4½˝ dia. 8˝ x 3¼˝ dia. 10 lbs. $36.9510-3051 F-175667 2.65 130 15.2 9175 43mm 4½˝ dia. 7⅞˝ x 3¼˝ dia. 11 lbs. $37.9510-3063 M-176006 2.25 95 18 5975 44mm 4½˝ dia. 7⅞˝ x 3¼˝ dia. 11 lbs. $37.9510-3030 F-190528 2.65 130 15.2 6350 44mm 4½˝ dia. 8˝ x 3¼˝ dia. 10 lbs. $38.9510-3060 M-215393 2.6 130 14.9 8800 43mm NONE 811/16˝ x 3¼˝ dia. 10 lbs. $37.9510-3041 M-175683 2.9 100 22.3 6325 44mm 4½˝ dia. 8⅝˝ x 3¼˝ dia. 12 lbs. $39.9510-3039 F-174504 1 130 5.7 9600 44mm 4½˝ dia. 7⅞˝ x 3¼˝ dia. 9 lbs. $29.95

½˝ NPT Brass Ball ValveITEM 20-1661 $1.49• New brass ball valve. ¼˝ orifice. Stainless ball and teflonseal. Compact design. Use for tank drains, etc.SPECIFICATIONS • Size 1˝ dia. x 1½˝• Ports ½˝ NPT male/female • Shpg. ½ lb.

800-488-3407 Just Arrived! 195&

3:1 Right AngleGearReducer

ITEM 13-1564$228.95• Brand new. OMNI-GEAR LR-200 SeriesModel 251075 right angle gearbox. Onepiece cast iron gear case and bearingcaps. Roller bearings. Hollow output withfull length keyway.SPECIFICATIONS• Ratio 3:1• Input power 32 HP continuous• Input speed 1800 RPM max.• Input shaft 1˝ dia. x 1¾˝ with ¼˝ crossholeand snap ring groove

• Output shaft hollow 1˝ diam. x 6˝ w/ ¼˝ keyway• Mount four ⅜-16 tapped holes, 4¼˝ sq.• Size 6½˝ x 6¼˝ x 4⅛˝• Shpg. 23 lbs.

Rotary Cutter GearboxesBrand new, OMNI GEAR Rotary right angle rotary cutter gearbox. Horizontal input and vertical output downward.

Bevel gears. Large deep groove ball bearings to support output. Cast iron housing.

RC 30 Series

$129.95 each

SPECIFICATIONS FOR ALL• CCW input gives CW output• Input RPM 1000• Input HP 24-40• Max torque 2800-4667 in.lbs.• Output shaft 19/16˝ dia. 12 tooth tapered spline withthreaded end 4½˝ total length

• Blade hub 2.95˝ dia. x 2.02˝stepped down to 2.5˝ dia. x 0.27˝then tapers down to 2.183˝ dia. over 0.315˝

• Mount 4 holes on 6.8˝ dia. B.C.• Pilot 5¼˝ dia. • Size 10¼˝ x 7˝ x 7˝• Shpg. 54 lbs.

ITEM 13-1526SPECIFICATIONS• Model 250001• Input shaft 1⅜˝ dia. x 3˝ long with ½˝ dia. pinhole• Gear ratio 1:1.47 increaser• Output RPM 1470

ITEM 13-1527SPECIFICATIONS• Model 250179• Input shaft 1⅜˝ dia. x 3⅞˝ long 6T splinewith 5/16˝ dia. pinhole

ITEM 13-1528SPECIFICATIONS• Model 250045• Input shaft 1⅜˝ dia. x 3˝ long with ½˝ dia. pinhole• Gear ratio 1:1.93 increaser• Output RPM 1930

RC71 Series

$269.95 each

SPECIFICATIONS FOR ALL• Input RPM 1000• Input HP 35-83• Max torque 4083-9683 in.lbs.• Input shaft 1⅜˝ dia. x 3⅞˝ long 6T spline with5/16˝ dia. pinhole

• Output shaft 2˝ dia., 15 tooth tapered spline withthreaded end 4⅝˝ total length


• Mount 4 holes on 8˝ dia. B.C.• Pilot 5⅝˝ dia. • Size 12⅜˝ x 9¾˝ x 9¾˝• Shpg. 89 lbs.

ITEM 13-1533SPECIFICATIONS• Model 250598 • Gear ratio 1:1.21 increaser• CW input gives CW output • Output RPM 1120 RPM

ITEM 13-1534SPECIFICATIONS• Model 250492 • Gear ratio 1:1.46 increaser• CW input gives CCW output • Output RPM 1460 RPM

RC51 Series

$179.95 each

SPECIFICATIONS FOR ALL• CCW input gives CW output• Input RPM 1000• Gear ratio 1:1.93 increaser• Output RPM 1930• Input HP 24-40• Max torque 2800-4667 in.lbs.• Output shaft 2˝ dia., 15 tooth tapered spline withthreaded end 4⅝˝ total length


• Mount 4 holes on 6.8˝ dia. B.C.• Pilot 5¼˝ dia. • Size 10¼˝ x 7˝ x 7˝• Shpg. 59 lbs.

ITEM 13-1529SPECIFICATIONS• Model 250746• Input shaft 1⅜˝ dia. x 3⅞˝ long 6T splinewith 5/16˝ dia. pinhole

ITEM 13-1530SPECIFICATIONS• Model 250618• Input shaft 1⅜˝ dia. x 3˝ long with ½˝ dia. pinhole

ITEM 13-1531SPECIFICATIONS• Model 251026• Input shaft 1⅜˝ dia. x 3˝ long with ½˝ dia. pinhole• Blade hub 3.94˝ dia. x 1.75˝stepped down to 2.5˝ dia. x 1.12˝then tapers down to 2.175˝ dia. over 0.25˝

Looking for a replacementOMNI gearbox?

Provide us with the 6 digitassembly number andwe will order it for you!

Right AngleGear DriveITEM 13-1525$179.95• Brand new, OMNIGEAR Model PHD26HD vertical,right angle gearbox. Originallymanufactured for PTO drivenpost hole digger systems. Ta-pered roller bearings. Spring loaded triplelip seals. Clockwise input rotation givesclockwise output rotation. Cast iron hous-ing. Designed to free hang from a support-ing structure or boom that is connected toit with a ⅞˝ dia. pin at the top of the gear-box housing. Four ⅜˝-16 tapped holes on3⅜˝ dia. B.C. to mount input shaft shieldand four ⅜˝-16 tapped holes on 4⅛˝ dia.B.C. to mount output shaft shield.SPECIFICATIONS• Gear ratio 2.92:1 • HP input max. 44 HP• RPM 540 input max. • Torque 5133 lb.-in. max.• 38 oz. oil capacity• Inner width of mounting ears 4¼˝• Throat depth of pin 13/16˝• Input shaft 1¼˝ dia. x 2˝ smooth with5/16˝ dia. pin hole

• Output shaft 2˝ x 4⅜˝ smooth shaft withtwo ½˝ dia. pin holes 2¾˝ and3¾˝ bearing to center hole

• Size 9½˝ x 8¼˝ x 7⅝˝ • Shpg. 51 lbs.

1:1.46 SpeedIncreaser

ITEM 13-1532$269.95• Brand new, OMNIGEAR 250372 ModelRC-61 right angle rotary cut-ter gearbox. Horizontal inputand vertical output downward.Bevel gears. Large deep grooveball bearings to support output. Four 5/16˝-18 tapped holes on 4⅛˝ dia. B.C. CCWinput gives CW output.SPECIFICATIONS• Gear ratio 1:1.46 increaser• Input RPM 1000• Output RPM 1460• Input HP 35-72• Max torque 4083-8400 in.lbs.• Input shaft 1⅜˝ dia. x 3⅞˝ long 6T spline with5/16˝ dia. pinhole

• Output shaft 2˝ dia. 15 tooth tapered spline withthreaded end. 4⅝˝ total length

• Blade hub 3.94˝ dia. x 2.275˝ stepped downto 2.5˝ dia. x 0.45˝ then tapers downto 2.175˝ dia. over 0.25˝

• Mount 4 holes on 8˝ dia. B.C.• Pilot 5⅝˝ dia.• Size 12⅜˝ x 9¾˝ x 9¾˝• Shpg. 84 lbs.




ITEM 1-5022$21.95• New take-offs, WANDA turf tire on blacksteel rim. Not for Highway Service.SPECIFICATIONS• Size 18x8.50-8 • Ball bearing• O.D. 17¾˝ • Tubeless• Tread turf • Load rating• Tread width 7½˝ 815 lbs. at 22 PSI• Hub ¾˝ bore x • Ply rating 431/16˝ wide • Ply material nylon

• Hub type offset • Shpg. 17 lbs.

Find additionalWanda Turf Tires on page 192

27.1 HP Kubota DieselEngine

ITEM 28-1904$2895.95

• New, KUBOTA diesel engine. Reliable,quiet and durable power 3 cylinder dieselengine for a variety of industrial applica-tions. Engine has many built-in design fea-tures to provide clean emissions, fueleconomy and noise reduction. Additionalfeatures include cast iron block and cylin-der head, constant speed governor, glowplugs and 12 volt alternator. No starter orengine shut-off solenoid. Engine meets USEPA and California emission requirements.Manufactured in 2014.SPECIFICATIONS • Flywheel• Model D1703-M-BG-ET01 Size 133/16˝ dia.• Family CKBXLO0.2FCC Pilot 314mm• Power 27.1 HP (20.2 kW) Bolt holes 8at 1800 RPM Hole spacing

• Displacement 1.7 liters 295mm bolt circle• Alternator 12 VDC • Size 22˝ x 19˝ x 26½˝• Bell housing none • Shpg. 395 lbs.

Truck freight only.

Catalog 289 2016 Edition SURPLUS CENTER1015 West ”O“ StreetLincoln, NE 68528

SOURCE CODE

8 Ton, 19¼˝ StrokeHigh Lift Jacks• New, VALLEY high lift ram jacks.

ITEM 9-8721-C$49.99• Clevis on base end with pinhole on rod end for high lift ap-plications.SPECIFICATIONS• Capacity 8 ton • Pin size ⅝˝• Stroke 19¼˝ • Handle strokes per inch 12• Retracted height 24¾˝ • Handle length 19¾˝• Clevis inside width 13/16˝ • Shpg. 25 lbs.

ITEM 9-8721-F $49.99• Same as ITEM 9-8721-C above exceptflat bottom. Retracted height 237/16˝.

LED MultifunctionSWAT Flashlights

$15.95 each• Brand new, LED multifunction PoliceSWAT style rechargeable flashlight. Fea-tures include adjustable beam from spot toflood, flashing mode, waterproof aluminumbody, knurled non-slip grip, rechargeable3.7 volt battery, 115 volt AC plug-in and 12volt DC car adapters for charging and car-rying case.SPECIFICATIONS• Bulb LUXEON 3 Watt LED bulb• Light beam adj. spot to flood• Charger adapters 115 VAC and 12 VDC• Battery 3.7 V 1800 mAh• Battery life between charge 180 minutes• Battery recharge life up to 500 times• Bulb life 100,000 hours• Shpg. 2 lbs.

ITEM 1-4037-B Black Color

ITEM 1-4037-C Camouflage Color

Black And RedMower Seats

ITEM 1-5015-A $24.95• New, riding mower seat. Black and redvinyl fabric cushion.SPECIFICATIONS• Backrest height 15½˝ • Cushion depth 16˝• Mounting holes four • Size 22¾˝ x 18˝ x 20¼˝tapped M8-1.25 on • Actual weight 21 lbs.13¾˝ x 11¼˝ centers • Shpg. 58 lbs. (oversize)With Slide Rails• Seats with adjustable slide rails mountedto a removable steel seat pan to allow seatto flip forward. Available with or without apresence switch. Flip-bracket mountingholes are ⅜˝ diameter with 14˝ inside width.

ITEM 1-5015 without switch $39.95ITEM 1-5015-S with switch $44.95

6.5 HP PowerPro ElectricStart Engine

ITEM 28-1898-E $169.95• New, PowerPro series horizontal shaftengine. Features include overhead valves,cast iron sleeve liner, mechanical governor,dual element air filter, low-oil sensor, andelectronic ignition. Manual throttle andchoke, key for electric start. CARB/EPAcertified for emission standards. Chargingcircuit to keep battery charged. Specialcrankshaft commonly used for centrifugalpumps.SPECIFICATIONS • Shaft ⅝˝ dia. x 25/16˝• Model 2541-0055 w/⅝-18 thread on• Power 6.5 HP last 1˝ (no keyway)• Bore/Stroke 2.7˝ x 2.1˝ • Accessory mount• Disp. 12 cu. inch 4 Bolt 3⅝˝ B.C.• Speed 3600 RPM • Fuel tank 3.88 qt.• Start electric/recoil backup • Size 14⅞˝ x 12⅜˝ x 13¼˝• Shaft horizontal • Shpg. 46 lbs.

12 VDCPowerpack

ITEM 9-7384$249.95• New, SPX / FENNER ModelDB 1560 powerpack. Hy-draulic power source ideal foruse with separate directionalcontrol valve (not included).SPECIFICATIONS• Voltage 12 DC • Relief valve fixed 3500 PSI• Amperage 180 Amps max • Reservoir 1 gallon• Duty intermittent • Ports SAE 6• Flow 1 GPM at 500 PSI • Six mounting slots• Flow 0.42 GPM at 3450 PSI• Orientation vertical• Pressure 3500 PSI max • Size 25½˝ x 6½˝ x 7˝• Valving None • Shpg. 31 lbs.

Date post:	10-Mar-2018
Category:	Documents
Upload:	dangkhuong
View:	344 times
Download:	7 times

Double Acting Hydraulic Cylinders - SURPLUS · PDF fileWhat is the Surplus Center? ... All of...

Documents