7/17/2019 Double Sigma Mixer Heavy Duty
http://slidepdf.com/reader/full/double-sigma-mixer-heavy-duty 1/2
Due to the continuous effort of Peerless
Engineering to improve performance,
dimensional data and specifications are
subject to change without notice.
Peerless®
DOUBLE SIGMA MIXERHeavy Duty
Tilt Height withStandard 51 MM Lip
Tilt Height withExtended Lip
Overtilt Option140º
OVERTILT OPTIO
TILT ANGLE 120° 110° 100° 90° 140°
DIMENSION A R E B R F C R G D R H J R
DA50 622 356 470 686 229 622 768 102 762 864 51 864 549 51
DA100 546 406 368 603 254 533 686 127 673 775 51 775 483 51
DA150 546 406 368 603 254 533 686 127 673 775 51 775 483 51
DA200 610 330 470 686 152 648 787 51 787 889 51 889 521 51
DA250 584 254 483 667 102 648 775 517 775 889 51 889 473 51
DA300 667 356 514 749 178 705 851 51 851 965 51 965 584 51
DA350 654 381 489 730 203 679 832 51 832 940 51 940 572 51
DA400 679 457 476 762 229 699 876 76 870 1003 51 1003 610 51
DA500 775 584 508 838 356 737 940 203 914 1054 51 1054 1003 51
DA600 730 584 457 800 356 699 908 178 883 1029 51 1029 749 51
DA650 794 610 514 857 381 749 959 203 927 1080 51 1080 756 51
152 MM 152 MM 152
(MILLIMETERS)
Dimensions are for reference only. Please refer to the Certified Data Drawing for final specificatio
7/17/2019 Double Sigma Mixer Heavy Duty
http://slidepdf.com/reader/full/double-sigma-mixer-heavy-duty 2/2
500 S. Vandemark RoadSidney, OH 45365-0769 • USA Tel: 937.492.4158 • 800.999.3327Fax: 937.492.3688www.thepeerlessgroup.us
Dimensions are for reference only. Please refer to the Certified Data Drawing for final specificatio
Peerless® DOUBLE SIGMA MIXER Heavy Duty
P M C / 0 8 0 3
NOTE:Starter enclosure dimensionssubject to motor horsepowerand voltage.
NOTE:Dimension “J” is requiredbehind Mixer to easily removeMotor and Reducer,On most models, Motor andReducer can be removedthrough end of the Mixer also.
NEMA 12 RemoteMounted Starter
Enclosure
Refrigeration Outlet
(2) 51 MM -15 WLSanitaryLiquid Inlets
127 MM dia. FlourDust Vent
Refrigeration Inlet
ElectricalConnections
from Enclosure(1) 1½” NPT(2) ½” NPT
20 MM dia. Holddown Boltsfor DA100 thru DA350
30 MM dia. for DA400 thru DA500
102 MM
305 MM IDFlour Inlet
255 MM
318 MM
AGITATOR SPEEDSStandard Two Speed Models
Low - 40 RPMHigh - 80 RPM
Single Speed and variable speedversions are available as options
DIMENSIONS (Millimeters)
MODEL A B C D E F G H I J K L M N P
DA50 1067 711 318 419 838 2146 699 959 1918 660 1143 216 1981 152 419
DA100 1067 711 318 457 914 2146 762 959 1918 660 1143 305 1981 152 419
DA150 1067 889 318 457 914 2146 762 1048 2096 660 1321 305 2156 152 419
DA200 1067 1194 445 457 914 2337 838 1372 2743 660 1753 305 2845 152 419
DA250 1067 1194 445 457 914 2388 889 1372 2743 660 1753 305 2845 152 419
DA300 1168 1397 445 508 1016 2540 914 1473 2946 711 1956 330 3048 152 445DA350 1168 1397 445 508 1016 2540 914 1473 2946 711 1956 356 3048 152 445
DA400 1321 1397 483 546 1092 2807 1016 1511 3023 813 1930 394 3099 229 521
DA500 1422 1524 483 597 1194 2883 1016 1588 3175 813 2083 406 3251 229 572
DA600 1473 1702 483 622 1245 2934 1067 1676 3353 813 2261 432 3429 229 597
DA650 1524 1702 483 622 1270 2934 1067 1676 3353 813 2261 457 3429 229 597
SPECIFICATIONSTotal Approx.
Mixing Bowl Working Drive Total Tilt Approx. Net Shipping
Capacity Volume Capacity Motor Load Motor Floor Load Weight Weight
MODEL (Kilos) (Litres) (Litres) KW (KVA) KW (Kgs./CM2) (Kilos) (Kilos)
DA50 205 388 286 11/5.5 20 4 1.5 4,354 4,535
DA100 410 694 513 15/7.5 25 4 2.7 4,535 4,717
DA150 500 866 643 22/11 35 4 3.0 4,717 4,898
DA200 680 1263 858 30/15 45 4 2.2 5,170 5,397DA250 770 1,325 954 37/18.5 55 4 2.3 5,397 5,624
DA300 930 1,770 1,175 45/22.5 65 4 2.4 5,692 5,941
DA350 1,065 1,849 1,297 56/28 80 4 2.7 6,190 6,440
DA400 1,180 2,271 1,535 75/37.5 105 5.5 2.4 9,569 9,887
DA500 1,500 2,721 1,926 93/46.5 130 5.5 2.7 10,227 10,567
DA600 1,815 3,313 2,347 112/56 155 5.5 2.9 11,156 11,519
DA650 1,995 3,441 2,526 112/56 155 5.5 3.0 11,565 11,927