Douglas Stamping Company 2016 Catalog - Fludisa

14231 W. Eleven Mile RoadOak Park, MI 48237

248 542-3940 FAX 248 542-6342http://dougstampco.com [email protected]

ShimsSpacersWashers

StampingsNAAMS Components

Insulating ComponentsLaser Cutting and Engraving

Custom Flat Details

StampingLaser Cutting & Engraving

Douglas Stamping Company2016 Catalog

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342http://dougstampco.com [email protected]

Page 2

Douglas Stamping CompanyFamily owned and operated since 1947

Two Million Pieces, Ready to GoOur in-stock inventory includes more than 3000 different types of shims, spacers,washers, L-blocks, stop blocks and other standard details.

Shim and Spacer ExpertsFor 65 years, our customers have trusted us to quickly and cost effectively producespecialty precision shims and spacers to meet a variety of requirements. Our vastexperience and ever-expanding capabilities get the job done on time and in spec.

Custom and Specialty Shims, Spacers, Washers and DetailsWe will make any shim ring, ring spacer, washer or other flat detail, in any quantity andsize, from any material.

Production Stamping and Laser CuttingOur presses range from 19 to 80 tons, with automatic feed and roll straightening.In-house fiber optic laser cutting is available for shorter runs and custom items.

Marking and IdentificationWe laser engrave and stamp mark a variety of materials, from single piece toproduction runs. We can apply part numbers, logos and scale graduations.

Shim StockOur standard 1008-1010 full hard #1 temper #2 finish shim stock is available in metricand standard thickness, in standard widths up to 8 inches. We also carry a variety ofraw shim stock, sold by the foot, to accommodate your specific width and thicknessrequirements.

Special Materials and FinishesAlthough most of our stampings are made from shim stock, we are experienced with awide variety of ferrous, non-ferrous, laminated and composite materials. Our fiber opticlaser can cut just about any metal, including copper, brass and titanium.

NAAMS Standard ComponentsMost of the standard details defined by the NAAMS Assembly and Stamping standardsare available through us with very short lead times. See pages 58-60 for examples ofthese items.


Page 3

Design Considerations.............................................................................

Shims......................................................................................................

Spacers...................................................................................................

Retainer Plates........................................................................................

Keepers...................................................................................................

Insulating Bushings.................................................................................

Feeler Gages...........................................................................................

Weld ("D") Washers.................................................................................

Round Washers.......................................................................................

Insulating Washers..................................................................................

NAAMS Components...............................................................................

Index........................................................................................................

Table of Contents

4

5

37

58

59

60

60

61

62

63

63

66

Ordering Products or Requesting a QuoteWe accept orders by phone, fax, post or e-mail.

If you need something that is not in our catalog or the standards we supply, we arehappy to quote to your needs. Send us your specifications or stop in to discuss yourrequirements.

Special Note Regarding Shims:We take all possible precautions to avoid shipping of damaged product. The bulknature of manufacturing and shipping shims results in an occasional bent or mis-hitshim getting past us. We will happily and immediately replace any unusable product.

Design ConsiderationsSpecials and Custom ItemsThe shims, spacers and washers in this catalog represent a great deal of Douglas Stamping's product line, but not all of it.We will make any shim, spacer or washer, in any size, shape and quantity you require. We make shims in a wide variety ofmaterials, including plastic, brass, copper, stainless steel and laminated stock, using stamping, laser cutting and traditionalmachining.

Slots, Holes and KeyholesOur shims are available with slots, "keyholes," and holes. Slotted shims are generally used in applications where completedisassembly during adjustment is not practical or desirable. Keyhole shims are designed to pass over a threaded fastenerbelow the major diameter without falling out once the shim is lying flat. Most spacers are made with holes.

Shim Set Stackup RatiosThe shims we offer are available by the individual piece and in standard set ratios. These ratios are selected to permitstepping through the entire range of the set in a certain increment. For example, the standard 5mm -M507 set permitsstepping from 0.25mm to 5.00mm in 0.25mm increments.

Set stackups offered are ones commonly ordered. If your requirements differ, all shims are available by the individual piece.Please note that ordering shims by the set does not mean they will be assembled and packaged as sets! Unless otherarrangements are made in advance, all sets are bulk shipped. We will assemble and package individual sets for anadditional charge.

Part NumbersThis catalog is organized by our own numbering system that is consistant throughout our product lines. Prior to thisnumbering system, there were no recognized standards for part numbers or thickness conventions. (Most of the shim andspacer designs originated from multiple design sources from many different companies over a span of more than sixdecades.) We encourage the use of DSC part numbers to help reduce problems arising from the many inconsistencies andconflicts in the old systems. All original part numbers will continue to be recognized and indexed. If you are having difficultyidentifying a part number, try the index or give us a call for assistance.

Materials and TolerancesUnless otherwise specified, all of our shims are made from full hard 1010 cold rolled #1 temper #2 finish steel. Spacers aremade from cold drawn 1018, machined or stamped and precision ground to the specified thickness. Critical thicknesstolerances are held within ±0.03mm, unless otherwise specified. (Imperial thicknesses are held within ±.002 inches.)

Weld Washers"D" shaped weld washers offer a straight edge for easy welding after final locating of fasteners at assembly. These washersare also used in close clearance locations.

Drawing ConventionsSlots and holes are assumed to be centered unless otherwise noted, in order to reduce clutter in the drawings. Dimensionsfor shims and spacers are given in inches and in [millimeters] between the brackets. Drawings may not be to scale.

Additional Notes:Shims with a thickness of 0.25mm are not black oxided, as they are easily damaged during processing. Shims with athickess of 0.50mm that have long, delicate fingers are not black oxided for the same reason.


Page 4


Page 52015

DSCH001 Series - Individual ShimsDSC Part No. Description Thickness Other part numbersDSCH001-M025..........DSCH001-M050..........DSCH001-M100..........DSCH001-M200..........DSCH001-E015..........DSCH001-E032..........DSCH001-E062..........

Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Inch thickness shim........Inch thickness shim........Inch thickness shim........

.25mm............

.50mm............1.00mm..........2.00mm...........015 inch.........031 Inch.........062 inch........

FSD 34492-54FSD 34492-53FSD 34492-52FSD 34492-51FSD 14180-54FSD 14180-52FSD 14180-51

Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........

DSCH001 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH001-M454...........DSCH001-M505...........DSCH001-M506...........DSCH001-M507...........DSCH001-M605...........DSCH001-E255............

(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 Inch

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

.32R [8.1]

.22R [5.6]TYP


DSCH002 Series - Shim SetsDSC Part No. Description Thickness Set includes




DSCH002-M454...........DSCH002-M505...........DSCH002-M506...........DSCH002-M507...........DSCH002-M605...........DSCH002-E255............

FSD 34493-54, GSD-B-25FSD 34493-53, GSD-B-50FSD 34493-52, GSD-B-1FSD 34493-51, GSD-B-2FSD 14181-54FSD 14181-52FSD 14181-51

.25mm............


4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........








.25mm............


4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........


DSCH004 Series - Individual ShimsDSC Part No. Description Thickness Other part numbers




DSCH004-M025..........DSCH004-M050..........DSCH004-M100..........DSCH004-M200..........DSCH004-E015..........DSCH004-E032..........DSCH004-E062..........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........


.25mm............


0.40 [10.2]

0.75 [19.1]

0.38 [9.5]

1.00 [25.4]

0.40 [10.2]

1.00 [25.4]

0.50 [12.6]

1.00 [25.4]

0.56 [14.2]

1.00 [25.4]

0.50 [12.7]

1.24 [31.5]

0.37 [9.5]TYP

0.72 [18.3]

0.41 [10.4] 0.90 [22.9]

1.72 [43.7]

0.42 [10.7]

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted


Page 62015

.18R [4.6] TYP

.22R [5.6] TYP

.26R [6.6]TYP

.26R [6.6]TYP

















4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........



4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

.25mm............


.25mm............














.25mm............



4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

.25mm............


0.32 [8.1] TYP

0.63 [15.9]0.40 [10.2]

0.32 [8.1]0.62 [15.7]

1.25 [31.8]

0.38 [9.7] TYP

0.75 [19.1]

0.40 [10.2]

0.58 [14.7]

1.38 [35.1]

0.43 [10.9]

0.44 [11.2] TYP

0.49 [12.4]

0.44 [11.2] 0.80 [20.3]

1.68 [42.7]

0.75 [19.1]

0.44 [11.2] TYP

0.49 [12.4]

0.44 [11.2] 1.12 [28.4]

2.00 [50.8]

0.75 [19.0]


2015

.26R [6.6]TYP

R0.26TYP

R0.26 [6.6]TYP





Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......Five piece inch shim set..........











4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........



.25mm............


.25mm............














.25mm............



4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........


.25mm............



Page 7

0.44 [11.2]TYP (2)

0.49 [12.4]0.75 [19.1]

0.52 [13.2]

0.44 [11.2]TYP (2)

0.49 [12.4]

0.52 [13.2]

0.75 [19.1]

0.44 [11.2]TYP

0.54 [13.7]

1.46 [37.1]

2.38 [60.5]

0.46 [11.7]

0.94 [23.9]

0.44 [11.2]TYP (2)

0.52 [13.2]TYP (2)

0.75 [19.1]

0.44 [11.2]

0.49 [12.4]

0.88 [22.4] TYP

0.44 [11.2] 0.81 [20.6]TYP

2.50 [63.5]

.26R [6.6] TYP

3.50 [88.9]

3.00 [76.2]

0.44 [11.2] 1.06 [26.9]TYP


45°


Page 82015

.32R [8.1] TYP

.32R [8.1] TYP
















4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........



.25mm............


.25mm............














.25mm............



4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........


.25mm............


0.56 [14.2]TYP

0.54 [13.7]

0.66 [16.8] 1.60 [40.6]

1.00 [25.4]

2.92 [74.2]

0.56 [14.2]

0.70 [17.8]

0.58 [14.6] 1.75 [44.5]

2.90 [73.7]

1.00 [25.4]

.32R [8.1] TYP

0.62 [15.6]

0.70 [17.8]

0.56 [14.2]TYP (2)

0.64 [16.3]TYP (2)

1.00 [25.4]

1.00 [25.4] TYP

4.24 [107.7]

0.28 [7.1]

0.56 [14.2]

0.88 [22.4]

0.44 [11.2]

0.44 [11.2]0.22 [5.6]

0.50 [12.7]

1.00 [25.4]

.10R [2.5]TYP

.14R [3.6]TYP


45°

45°

45°

45°


Page 92015



















.25mm............



4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........


4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

.25mm............












.25mm............



4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

.25mm............


0.74 [18.8]

0.37 [9.4]

0.50 [12.7]

0.25 [6.4]

0.50 [12.7]

1.00 [25.4]

0.74 [18.8]

0.37 [9.4]

0.37 [9.4]

0.74 [18.8]

0.62 [15.7]

0.86 [21.8]

0.43 [10.9]

0.43 [10.9]

0.86 [21.8]

0.75 [19.1]

1.50 [38.1]

0.75 [19.1]

1.50 [38.1]

0.86 [21.8]

0.43 [10.9]

0.68 [17.3]

1.36 [34.5]

0.75 [19.1]

1.50 [38.1]

1.00 [25.4]

2.00 [50.8]

.16R [4.1]TYP (2)

.22R [5.6]

.16R [4.1]TYP (2)

.22R [5.6]

1.24 [31.5]

0.62 [15.7]

.13R [3.3]TYP (2)

.18R [4.6]

0.62 [15.7]

.14R [3.6]TYP


1.24 [31.5]

1.24 [31.5]

45°


Page 102015





(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm






Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.......Seven piece metric shim set...Five piece metric shim set.......

Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....Metric thickness shim.....



DSCH024-M025..........DSCH024-M050..........DSCH024-M100..........DSCH024-M200..........

DSCH024-M454...........DSCH024-M505...........DSCH024-M506...........DSCH024-M507...........DSCH024-M605...........



.25mm............

.50mm............1.00mm..........2.00mm..........

FSD 40800-54FSD 40800-53FSD 40800-52FSD 40800-51

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

DSC-625S-54DSC-625S-53DSC-625S-52DSC-625S-51125187-54125187-52125187-51

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

.25mm............












.25mm............



4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

.25mm............


.20R [5.1] TYP

0.74 [18.8]0.37 [9.4]

0.49 [12.4]

0.98 [24.9]

1.24 [31.5]

0.62 [15.7]

0.75 [19.1]

1.50 [38.1]

1.25 [31.8]

3.50 [88.9]

2.75 [69.9]

0.62 [15.7]

1.25 [31.8]

4.75 [120.7]

0.62 [15.7]

5.50 [139.7]

1.25 [31.8]

1.13 [28.7]

1.88 [47.8]

0.62 [15.7]



Page 112015












DSCH028 Series - Shim SetsDSC Part No. Description Thickness Set includesDSCH028-M454...........DSCH028-M505...........DSCH028-M506...........DSCH028-M507...........DSCH028-M605...........




4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

FSD 40828-50FSD 40828-51FSD 40828-52FSD 40828-53

FSD 40829-50FSD 40829-51FSD 40829-52FSD 40829-53

.25mm............

.50mm............1.00mm..........2.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........













.25mm............

.50mm............1.00mm..........2.00mm..........

FSD 40801-54FSD 40801-53FSD 40801-52FSD 40801-51

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

FSD 40827-50FSD 40827-51FSD 40827-52FSD 40827-53

.25mm............

.50mm............1.00mm..........2.00mm..........

0.94 [23.9]

0.50 [12.7] 1.38 [35.1]

2.38 [60.5]

0.54 [13.7]

0.34 [8.7] TYP

0.75 [19.1]

0.26 [6.6]

1.50 [38.1]

0.49 [12.5]TYP

0.44 [11.2]

0.34 [8.7]TYP

0.75 [19.1]

0.49 [12.5]0.26 [6.6]

0.44 [11.2]

1.00 [25.4]

0.34 [8.7]TYP

0.44 [11.2]

0.45 [11.4]

2.00 [50.8]

0.55 [14.0]TYP

0.75 [19.1]

0.40 [10.2]TYP



Page 122015

















4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

FSD 40894-54FSD 40894-53FSD 40894-52FSD 40894-51

FSD 40893-54FSD 40893-53FSD 40893-52FSD 40893-51

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........













FSD 40892-54FSD 40892-53FSD 40892-52FSD 40892-51

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........

FSD 40891-54FSD 40891-53FSD 40891-52FSD 40891-51

.25mm............

.50mm............1.00mm..........2.00mm.......... 1.00 [25.4]

0.44 [11.2]

0.50 [12.7]

0.50 [12.7]

1.00 [25.4]

1.50 [38.1]

0.44 [11.2]TYP

0.50 [12.7]

0.44 [11.1] 0.63 [15.9]

1.00 [25.4]

0.44 [11.2]TYP

0.50 [12.7]

0.44 [11.1]

2.13 [54.0]

0.63 [15.9]TYP

1.00 [25.4]

0.44 [11.1] 0.63 [15.9]TYP

0.50 [12.7]

0.44 [11.2]TYP

1.00 [25.4]

2.75 [69.9]



Page 132015
















4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

FSD 41257-51FSD 41257-52FSD 41257-53FSD 41257-54

ASH102ASH105ASH110ASH120

.25mm............

.50mm............1.00mm..........2.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........













4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

FSD 41256-51FSD 41256-52FSD 41256-53FSD 41256-54

.25mm............

.50mm............1.00mm..........2.00mm..........

FSD 40895-54FSD 40895-53FSD 40895-52FSD 40895-51

.25mm............

.50mm............1.00mm..........2.00mm..........

0.68 [17.3]

0.68 [17.3]

0.68 [17.3]

0.68 [17.3]

0.34 [8.5]

0.39 [10.0]

0.98 [25.0]

2.56 [65.0]

0.41 [10.5]

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleUnless noted, metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

0.25mm and 2.00mm unfinished0.50mm yellow dichromate1.00mm black oxide

0.44 [11.2] TYP

0.50 [12.7]

0.44 [11.1] 0.63 [15.9] TYP

3.38 [85.7]

1.00 [25.4]

.41Ø [10.5Ø]

0.41 [10.5]




Page 142015



















4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........


FSD 41260-51, ASH402, 56ZF28684-0FSD 41260-52, ASH405, 56ZF28684-1FSD 41260-53, ASH410, 56ZF28684-2FSD 41260-54, ASH420, 56ZF28684-3

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........











FSD 41259-51, ASH302, 56ZF28682-0FSD 41259-52, ASH305, 56ZF28682-1FSD 41259-53, ASH310, 56ZF28682-2FSD 41259-54, ASH320, 56ZF28682-3

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........

FSD 41258-51, ASH202FSD 41258-52, ASH205FSD 41258-53, ASH210FSD 41258-54, ASH220

.25mm............

.50mm............1.00mm..........2.00mm..........

1.34 [34.0]0.41 [10.5]

TYP

0.49 [12.5]

0.37 [9.5] 0.59 [15.0]

0.98 [25.0]

0.41 [10.5]TYP

0.49 [12.5]

0.35 [9.0]

1.89 [48.0]

0.59 [15.0]TYP

0.98 [25.0]

2.48 [63.0]

0.41 [10.5]TYP

0.49 [12.5]

0.35 [9.0] 0.59 [15.0]TYP

0.98 [25.0]

0.41 [10.5]TYP

0.49 [12.5]

0.35 [9.0]

3.07 [78.0]

0.98 [25.0]

0.59 [15.0]TYP

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleUnless noted, metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted






Page 152015

56ZF28685-056ZF28685-156ZF28685-256ZF28685-3

56ZF28686-056ZF28686-156ZF28686-256ZF28686-3
















4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

ACH602ACH605ACH610ACH620

.25mm............

.50mm............1.00mm..........2.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........













4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........

56ZF28683-056ZF28683-156ZF28683-256ZF28683-3

.25mm............

.50mm............1.00mm..........2.00mm..........

0.41 [10.4] TYP

0.98 [25.0]

0.37 [9.5] 0.98 [25.0]

1.77 [45.0]

0.49 [12.5]

2.76 [70.0]

0.41 [10.4] TYP

0.98 [25.0]

0.49 [12.5]

0.39 [10.0]0.98 [25.0]TYP

4.33 [110.0]

0.42 [10.6] TYP

4.33 [110.0]

0.79 [20.0]

0.79 [20.0] 2.76 [70.0]


2.21 [56.0]

0.98 [25.0]

0.41 [10.4] TYP

0.49 [12.5]

0.39 [10.0]TYP

0.71 [18.0]


Page 162015

ASH302SASH305SASH310SASH320S

ASH402SASH405SASH410SASH420S









4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........













4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........


.25mm............

.50mm............1.00mm..........2.00mm..........

0.42 [10.6]TYP

1.97 [50.0]

0.35 [9.0] 1.77 [45.0]

2.48 [63.0]

0.39 [10.0]

1.34 [34.0]

0.34 [8.5]TYP

0.79 [20.0]

0.28 [7.0] 0.39 [10.0] TYP

0.39 [10.0]

1.73 [44.0]

0.34 [8.5]TYP

0.79 [20.0]

0.28 [7.0] 0.39 [10.0] TYP

0.39 [10.0]









4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

DSC302SDSC305SDSC310SDSC320S

.25mm............

.50mm............1.00mm..........2.00mm..........

0.79 [20.0]

0.28 [7.0]

0.34 [8.5]

1.34 [34.0]




Page 172015

DSC402S, ASH102NDSC405S, ASH105NDSC410S, ASH110NDSC420S, ASH120N

ASH302NASH305NASH310NASH320N








4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........







4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........

0.28 [7.0]

0.79 [20.0]

1.73 [44.0]

0.34 [8.5]









ASH402NASH405NASH410NASH420N

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........








4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

DSC602SDSC605SDSC610SDSC620S

.25mm............

.50mm............1.00mm..........2.00mm..........

0.32 [8.0]

0.35 [9.0]TYP

1.42 [36.0]

0.28 [7.0] 1.57 [40.0]

0.35 [9.0]TYP

0.39 [10.0]

0.59 [15.0]TYP

1.81 [46.0]

0.31 [8.0]

0.79 [20.0]

0.35 [9.0]TYP

0.39 [10.0]

0.59 [15.0]TYP

2.40 [61.0]

0.32 [8.0]

0.79 [20.0]



2.13 [54.0]


Page 182015

(2) 2.00mm, (1) 1.00mm

Metric thickness shim.....Metric thickness shim.....

Three piece metric shim set....



DSCH053-M503...........

DSCH053-M100..........DSCH053-M200..........

5.00mm..........

DSC50081-1DSC50081-2

1.00mm..........2.00mm..........

0.43 [11.0]TYP

0.51 [13.0]

1.97 [50.0]

1.18 [30.0]0.39 [10.0]

0.98 [25.0]





Three piece metric shim set....DSCH054-M503...........

DSCH054-M100..........DSCH054-M200..........

5.00mm.......... (2) 2.00mm, (1) 1.00mm

DSC50082-1DSC50082-2

1.00mm..........2.00mm..........

Three piece metric shim set....




DSCH055-M100..........DSCH055-M200..........

DSCH055-M503...........

DSC50083-1DSC50083-2

5.00mm..........

1.00mm..........2.00mm..........

(2) 2.00mm, (1) 1.00mm

0.43 [11.0]TYP

0.98 [25.0]

0.39 [10.0] 1.97 [50.0]

2.76 [70.0]

0.51 [13.0]

0.63 [16.0]

0.98 [25.0]

2.99 [76.0]

1.97 [50.0]

1.00mm..........2.00mm..........

5.00mm..........



Three piece metric shim set....DSCH056-M503...........


DSCH056-M100..........DSCH056-M200..........

(2) 2.00mm, (1) 1.00mm

DSC50084-1DSC50084-2

0.63 [16.0]TYP

1.97 [50.0]

1.38 [35.0] 1.77 [45.0]

4.53 [115.0]

0.98 [25.0]


Page 192015







4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

GSD-C-25GSD-C-50GSD-C-1GSD-C-2

.25mm............

.50mm............1.00mm..........2.00mm..........

0.34 [8.6] TYP

1.00 [25.4]

0.38 [9.5] 0.75 [19.1]1.50 [38.1]

0.50 [12.7]











DSCH060 Series - Individual ShimsDSC Part No. Description Thickness Other part numbersDSCH060-M025..........DSCH060-M050..........DSCH060-M100..........DSCH060-M200..........




GSD-F-25GSD-F-50GSD-F-1GSD-F-2

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........

GSD-E-25GSD-E-50GSD-E-1GSD-E-2

.25mm............

.50mm............1.00mm..........2.00mm..........

0.41 [10.4]TYP

1.00 [25.4]

0.50 [12.7]

2.50 [63.5]

0.75 [19.1]

0.50 [12.7]

1.00 [25.4]

0.56 [14.2]TYP

0.50 [12.7]

1.00 [25.4]TYP

0.50 [12.7]

3.00 [76.2]






4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........



.25mm............

.50mm............1.00mm..........2.00mm..........

GSD-A-25GSD-A-50GSD-A-1GSD-A-2

0.34 [8.6]

0.38 [9.5]

0.75 [19.1]

0.75 [19.1]


Page 202015











4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

GSD-H-25GSD-H-50GSD-H-1GSD-H-2

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

GSD-G-25GSD-G-50GSD-G-1GSD-G-2

.25mm............

.50mm............1.00mm..........2.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........





4.00 [101.6]

1.00 [25.4]TYP

0.50 [12.7]

0.50 [12.7]

1.00 [25.4]

0.56 [14.2]TYP


0.56 [14.2]TYP

1.00 [25.4]

0.50 [12.7]

0.50 [12.7] 1.00 [25.4] TYP

5.00 [127.0]

Note regarding NAAMS Standard ComponentsWhile Douglas Stamping Company has always specialized in providing high quality shims,spacers and washers to a wide range of industry and end users, we also provide a varietyof details and components used in automated welding machines and production equipment.

Most of these items are not cataloged, as they are part of readily available industrialstandards. For specific part numbers and engineering information, please visithttp://naamssstandards.org. We provide all of the shims, spacers, washers, L-blocks, stopblocks, locating pins and retainers listed, most of the stub shafts, and many othercomponents. Please contact us for price and availablity. Examples of many of these itemscan be found on pages 63 and 64.

We also continue to provide obsolete FSD, Ford, Chrysler, GM and other industrialstandard shims, spacers, L-blocks, stop blocks, locating pins, retainers and stub shafts, andare capable of producing special and custom components to print using traditional stampingmethods and in-house laser cutting.

2014


Page 21

(1) 2.00mm, (2) 1.00mm, (1) .50mm(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm(2) 2.00mm, (1) 1.00mm, (2) .50mm(3) .062 inch, (2) .031 inch















4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-CCCCM FS 15-CCCM FS 15-CCM FS 15-CFS 15-CCCFS 15-CCFS 15-C

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-DDDDM FS 15-DDDM FS 15-DDM FS 15-DFS 15-DDDFS 15-DDFS 15-D

.25mm............

.50mm............1.00mm..........2.00mm...........015 inch.........031 inch.........062 inch........

.25mm............














.25mm............


M FS 15-AAAAM FS 15-AAAM FS 15-AAM FS 15-AFS 15-AAAFS 15-AAFS 15-A

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-BBBBM FS 15-BBBM FS 15-BBM FS 15-BFS 15-BBBFS 15-BBFS 15-B

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

.25mm............


0.34 [8.6] 0.75 [19.1]

0.34 [8.6]0.28 [7.1]

0.50 [12.6]

0.45 [11.4]1.00 [25.4]

0.30 [7.6]

1.00 [25.4]

0.28 [7.1]0.34 [8.6]

1.00 [25.4]

0.50 [12.6]

0.30 [7.6]1.00 [25.4]

0.45 [11.4]

0.24 [6.0]

0.34 [8.6] 0.28 [7.1]

0.31 [7.9]

0.45 [11.4]1.00 [25.4]

0.30 [7.6]

0.63 [16.0]


2014


Page 22

















.25mm............


M FS 15-HHHH, GSD-D-25M FS 15-HHH, GSD-D-50M FS 15-HH, GSD-D-1M FS 15-H, GSD-D-2FS 15-HHHFS 15-HHFS 15-H

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-GGGGM FS 15-GGGM FS 15-GGM FS 15-GFS 15-GGGFS 15-GGFS 15-G

.25mm............














M FS 15-EEEEM FS 15-EEEM FS 15-EEM FS 15-EFS 15-EEEFS 15-EEFS 15-E

.25mm............


4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-FFFFM FS 15-FFFM FS 15-FFM FS 15-FFS 15-FFFFS 15-FFFS 15-F

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

.25mm............


0.28 [7.1]0.34 [8.6]

0.50 [12.6]

0.45 [11.4]

1.38 [34.9]

0.25 [6.4]

0.24 [6.0]

1.00 [25.4]

0.34 [8.6]0.28 [7.1] TYP (2)

0.24 [6.0]

1.38 [34.9]

0.45 [11.4]TYP

0.50 [12.7]1.00 [25.4]

0.28 [7.1]TYP (2)

0.34 [8.6]TYP (2)

0.50 [12.7]

1.88 [47.8]

0.45 [11.4]TYP

0.24 [6.1]

1.00 [25.4]

1.88 [47.8]

0.34 [8.6] TYP

1.00 [25.4]

0.44 [11.2] 0.50 [12.7]TYP

0.50 [12.7]


2014


Page 23

















4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-MMMMM FS 15-MMMM FS 15-MMM FS 15-MFS 15-MMMFS 15-MMFS 15-M

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-LLLLM FS 15-LLLM FS 15-LLM FS 15-LFS 15-LLLFS 15-LLFS 15-L

.25mm............


.25mm............














M FS 15-JJJJM FS 15-JJJM FS 15-JJM FS 15-JFS 15-JJJFS 15-JJFS 15-J

.25mm............


4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-KKKKM FS 15-KKKM FS 15-KKM FS 15-KFS 15-KKKFS 15-KKFS 15-K

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

.25mm............


0.28 [7.1] TYP (2)0.34 [8.6]

0.45 [11.4]TYP

1.38 [35.1]0.24 [6.1]

0.75 [19.1]0.38 [9.7]

0.28 [7.1] TYP (2)0.34 [8.6]TYP (2)

0.38 [9.7]0.75 [19.1]

0.24 [6.1] 0.45 [11.4]TYP

1.88 [47.8]

0.28 [7.1]0.34 [8.6]TYP (2)

0.38 [9.7]

0.30 [7.6]

1.50 [38.1]

0.45 [11.4]TYP

0.75 [19.1]

1.50 [38.1]0.28 [7.1]

1.00 [25.4]

0.45 [11.4]TYP

0.30 [7.6]

0.50 [12.7]

0.34 [8.6]TYP (2)


2015


Page 24

















4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-TTTTM FS 15-TTTM FS 15-TTM FS 15-TFS 15-TTTFS 15-TTFS 15-T

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-RRRRM FS 15-RRRM FS 15-RRM FS 15-RFS 15-RRRFS 15-RRFS 15-R

.25mm............


.25mm............














M FS 15-NNNNM FS 15-NNNM FS 15-NNM FS 15-NFS 15-NNNFS 15-NNFS 15-N

.25mm............


4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-PPPPM FS 15-PPPM FS 15-PPM FS 15-PFS 15-PPPFS 15-PPFS 15-P

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

.25mm............


0.34 [8.6]

1.38 [35.1]0.69 [17.5]

0.75 [19.1]

0.34 [8.6]TYP

1.25 [31.8]

0.38 [9.5] 0.50 [12.7]TYP

2.75 [69.9]

0.50 [12.7]

0.34 [8.6]TYP

0.38 [9.5]

0.31 [7.9]

1.38 [34.9]

0.75 [19.1]

1.25 [31.8]

0.34 [8.6] TYP1.75 [44.5]

0.38 [9.5]

1.25 [31.8]

0.38 [9.5]0.50 [12.7] TYP


2015


Page 25









4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-WWWW, GSD-K-25M FS 15-WWW, GSD-K-50M FS 15-WW, GSD-K-1M FS 15-W, GSD-K-2FS 15-WWWFS 15-WWFS 15-W

.25mm............













M FS 15-UUUUM FS 15-UUUM FS 15-UUM FS 15-UFS 15-UUUFS 15-UUFS 15-U

.25mm............


4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

M FS 15-VVVV, GSD-J-25M FS 15-VVV, GSD-J-50M FS 15-VV, GSD-J-1M FS 15-V, GSD-J-2FS 15-VVVFS 15-VVFS 15-V

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm...........250 inch........

.25mm............


1.00 [25.4]0.34 [8.6]

TYP

1.00 [25.4]

0.28 [7.0]0.45 [11.4]

0.28 [7.1]

0.56 [14.2]TYP

0.50 [12.7]

1.00 [25.4] TYP

6.00 [152.4]

0.50 [12.7]

1.00 [25.4]

3.00 [76.2]0.56 [14.2] TYP

2.00 [50.8]

0.50 [12.7]1.00 [25.4] TYP

0.50 [12.7]



Four piece metric shim set......Five piece metric shim set.......Six piece metric shim set.........Seven piece metric shim set...Five piece metric shim set.......





DSC302LDSC305LDSC310LDSC320L

4.50mm..........5.00mm..........5.00mm..........5.00mm..........6.00mm..........

.25mm............

.50mm............1.00mm..........2.00mm..........

0.43 [11.0] 0.63 [16.0]TYP

0.43 [11.0]

2.15 [54.5]

2.13 [54.0]0.35 [9.0] TYP


2015


Page 26

Ø0.56[14.2]

Ø0.44 [11.2]TYP

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch


Inch thickness shim........Inch thickness shim........Inch thickness shim........

Five piece inch shim set..........(This set also known as 42-530-2525)





DSCH083 Series - Individual ShimsDSC Part No. Description Thickness Other part numbersDSCH083-E015..........DSCH083-E032..........DSCH083-E062..........

DSCH084-E155............

DSCH084-E015..........DSCH084-E032..........DSCH084-E062..........

DSCH083-E155............

CSS 33-3CSS 33-1CSS 33-2

.015 inch........

.031 inch........

.062 inch........

.150 inch........

CSS 35-3CSS 35-1CSS 35-2

.150 inch........

.015 inch........

.031 inch........

.062 inch........

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inchFive piece inch shim set..........(This set also known as 42-530-2575)








DSCH086-E155............


DSCH085-E155............


.150 inch........

CSS 44-3CSS 44-1CSS 44-2

.150 inch........

.015 inch........

.031 inch........

.062 inch........

CSS 37-3CSS 37-1CSS 37-2

.015 inch........

.031 inch........

.062 inch........

1.25 [31.8]

0.75 [19.1]

0.50 [12.7]0.38 [9.5]

0.75 [19.1]

0.75 [19.1]

Ø0.44 [11.2]TYP 1.75 [44.5]

0.75 [19.1]

0.50 [12.7]TYP

0.38 [9.5]

Ø0.44 [11.2]

1.00 [25.4]

1.00 [25.4]

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleSets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scaleMetric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

2015


Page 27

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch









DSCH090-E155............

DSCH089-E155............



.150 inch........

CSS 88-3CSS 88-1CSS 88-2

CSS 66-3CSS 66-1CSS 66-2

.150 inch........

.015 inch........

.031 inch........

.062 inch........

.015 inch........

.031 inch........

.062 inch........









DSCH088-E155............


DSCH087-E155............


.150 inch........

CSS 48-3CSS 48-1CSS 48-2

.150 inch........

.015 inch........

.031 inch........

.062 inch........

CSS 46-3CSS 46-1CSS 46-2

.015 inch........

.031 inch........

.062 inch........

Ø0.44 [11.2]TYP

1.50 [38.1]

1.50 [38.1]

0.38 [9.5] 0.75 [19.1]

0.38 [9.5]

0.75 [19.1]

Ø0.44 [11.2]TYP 1.50 [38.1]

1.00 [25.4]

0.50 [12.7]0.50 [12.7]

Ø0.44 [11.2]TYP

2.00 [50.8]

1.00 [25.4]

0.50 [12.7]TYP

0.50 [12.7]

2.00 [50.8]

2.00 [50.8]

0.63 [15.9]TYP0.38 [9.5]

0.38 [9.5]

1.24 [31.5]

Ø0.44 [11.2]TYP


2015


Page 28

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch









DSCH094-E155............

DSCH093-E155............



.150 inch........

.150 inch........

CSS 410-3CSS 410-1CSS 410-2

CSS 412-3CSS 412-1CSS 412-2

.015 inch........

.031 inch........

.062 inch........

.015 inch........

.031 inch........

.062 inch........










DSCH092-E155............

DSCH091-E155............


.150 inch........

CSS 99-3CSS 99-1CSS 99-2

.150 inch........

.015 inch........

.031 inch........

.062 inch........

CSS 89-3CSS 89-1CSS 89-2

.015 inch........

.031 inch........

.062 inch........

Ø0.44 [11.2]TYP (2)

Ø1.03 [26.2]

2.00 [50.8]

1.13 [28.6]2.25 [57.2]

1.00 [25.4]

0.81 [20.6]TYP

2.24 [56.9]

1.12 [28.4]

0.75 [19.1] TYP0.37 [9.4]

1.12 [28.4]

0.37 [9.4]

1.50 [38.1]2.24 [56.9]

Ø0.75[19.1]

Ø0.56 [14.2]TYP

2.50 [63.5]

1.00 [25.4]

0.50 [12.7]0.50 [12.7]

TYP

Ø0.44 [11.2]TYP

1.00 [25.4]TYP

0.50 [12.7]

1.00 [25.4]

3.00 [76.2]

Ø0.44 [11.2]TYP


2015


Page 29

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch









DSCH098-E155............

DSCH097-E155............



.150 inch........

CSS 1010-3CSS 1010-1CSS 1010-2

CSS 812-3CSS 812-1CSS 812-2

.150 inch........

.015 inch........

.031 inch........

.062 inch........

.015 inch........

.031 inch........

.062 inch........









DSCH096-E155............


DSCH095-E155............


.150 inch........

CSS 512-3CSS 512-1CSS 512-2

.150 inch........

.015 inch........

.031 inch........

.062 inch........

CSS 510-3CSS 510-1CSS 510-2

.015 inch........

.031 inch........

.062 inch........

Ø0.44 [11.2]TYP 2.50 [63.5]

1.25 [31.8]

0.88 [22.2]TYP

0.38 [9.5]

Ø0.44 [11.2]TYP

0.38 [9.5] 1.13 [28.6]TYP

1.25 [31.8]

3.00 [76.2]

Ø0.44 [11.2]TYP 2.50 [63.5]

1.74 [44.2] 2.50 [63.5]

0.38 [9.5]

0.88 [22.2]TYP (4)

0.38 [9.5]

Ø0.44 [11.2]TYP

2.00 [50.8]

0.63 [15.9]

3.00 [76.2]

0.38 [9.5]

0.63 [15.9]

0.38 [9.5]

0.63 [15.9]

HOLE PATTERN ISSYMMETRICAL ALONGDIAGONAL


2015


Page 30


DSCH099-E155............


DSCH100-E155............







DSCH101-E155............

DSCH102-E155............






.150 inch........

(1) .062 inch, (2) .031 inch, (2) .015 inch



CSS 1218-3CSS 1218-1CSS 1218-2

.015 inch........

.031 inch........

.062 inch........

.150 inch........



CSS 1214-3CSS 1214-1CSS 1214-2

.015 inch........

.031 inch........

.062 inch........

.150 inch........



CSS 1212-3CSS 1212-1CSS 1212-2

.015 inch........

.031 inch........

.062 inch........

.150 inch........


.015 inch........

.031 inch........

.062 inch........

CSS 1012-3CSS 1012-1CSS 1012-2

Ø0.44 [11.2]TYP

2.50 [63.5]

3.00 [76.2]

1.00 [25.4]

0.38 [9.5]

1.25 [31.8]

2.24 [56.9]

0.38 [9.5]

1.25 [31.8] 1.00 [25.4]

0.38 [9.5]

1.00 [25.4]

2.75 [69.9]

4.50 [114.3]

3.00 [76.2]



Ø0.44 [11.2]TYP


0.38 [9.5]

1.25 [31.8] 1.00 [25.4]

0.38 [9.5]

1.00 [25.4]

3.50 [88.9]

3.00 [76.2]Ø0.44 [11.2]TYP


3.00 [76.2]

0.38 [9.5]1.63 [41.3]

0.63 [15.9]

0.38 [9.5]

0.63 [15.9]

3.00 [76.2]

0.38 [9.5]

Ø0.44 [11.2]TYP


2015


Page 31

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch

(1) .062 inch, (2) .031 inch, (2) .015 inch









DSCH106-E155............

DSCH105-E155............



.150 inch........

CSS 1816-3CSS 1816-1CSS 1816-2

.150 inch........

CSS 1822-3CSS 1822-1CSS 1822-2

.015 inch........

.031 inch........

.062 inch........

.015 inch........

.031 inch........

.062 inch........









DSCH104-E155............


DSCH103-E155............


.150 inch........

CSS 1616-3CSS 1616-1CSS 1616-2

.150 inch........

.015 inch........

.031 inch........

.062 inch........

CSS 1417-3CSS 1417-1CSS 1417-2

.015 inch........

.031 inch........

.062 inch........

Ø0.56 [14.2]TYP

3.50 [88.9]1.25 [31.8]

TYP

0.50 [12.7]

0.50 [12.7]3.25 [82.6]

4.25 [108.0]

Ø0.56 [14.2]TYP

4.00 [101.6]

1.50 [38.1]TYP

0.50 [12.7]

Ø0.56 [14.2]TYP (8)

Ø1.00 [25.4]

0.50 [12.7] 1.75 [44.5]TYP

4.50 [114.3]

4.50 [114.3]

2.25 [57.2]TYP (4)

0.50 [12.7]

1.75 [44.5]TYP (4)0.50 [12.7]

5.50 [139.7]

Ø0.56 [14.2]TYP

1.50 [38.1] TYP

0.50 [12.7]

1.50 [38.1]TYP

0.50 [12.7]

4.00 [101.6]


2015


Page 32

(4) .059 inch.....

Inch thickness shim........

Four piece inch shim set.........

DSCH107 Series - Shim SetsDSC Part No. Description Thickness Set includes Other part numbers

DSCH107 Series - Individual ShimsDSC Part No. Description Thickness

DSCH107-E244............

DSCH107-E059..........

.236 inch........ D113063

.059 inch

0.75 [19.1]

3.50 [88.9]5.00 [127.0]

0.75 [19.1]

1.50 [38.1]

0.56 [14.2]TYP

0.56 [14.2]TYP

1.50 [38.1]0.75 [19.1]

4.00 [101.6]

0.56 [14.2]

0.75 [19.1]

2.50 [63.5]

4.00 [101.6]0.75 [19.1]

1.50 [38.1]

0.56 [14.2] TYP

9.00 [228.6]

0.75 [19.1]

7.50 [190.5]0.75 [19.1]

1.50 [38.1]

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale




DSCH108 Series - Individual ShimsDSC Part No. Description ThicknessDSCH108-E059..........

DSCH108-E244............

.059 inch

.236 inch........ (4) .059 inch..... D113064




DSCH109 Series - Individual ShimsDSC Part No. Description ThicknessDSCH109-E059..........

DSCH109-E244............

.059 inch

.236 inch........ (4) .059 inch..... D113065


Four piece inch shim set.........DSCH110-E244............ .236 inch........ (4) .059 inch..... D113066

DSCH110 Series - Individual ShimsDSC Part No. Description Thickness

Inch thickness shim........DSCH110-E059.......... .059 inch


3.00 [76.2]

4.50 [114.3]

.75 [19.1]

2015


Page 33

DSCH111 Series ShimsDSC Part No. Thickness Other part numbersDSCH111-E005..........DSCH111-E010..........DSCH111-E015..........DSCH111-E030..........DSCH111-E060..........DSCH111-E125..........

FSD 14195-55FSD 14195-54FSD 14195-53FSD 14195-52FSD 14195-51FSD 14195-50

.005 inch........

.010 inch........

.015 inch........

.030 inch........

.060 inch........

.125 inch........

.005 inch........

.010 inch........

.015 inch........

.030 inch........

.060 inch........

.125 inch........

DSCH112 Series ShimsDSC Part No. Thickness Other part numbersDSCH112-E005..........DSCH112-E010..........DSCH112-E015..........DSCH112-E030..........DSCH112-E060..........DSCH112-E125..........

FSD 5590-55FSD 5590-54FSD 5590-53FSD 5590-52FSD 5590-51FSD 5590-50

0.10mm..........0.20mm..........0.50mm..........1.00mm..........2.00mm..........5.00mm..........

DSCH113 Series ShimsDSC Part No. Thickness Other part numbersDSCH113-M010..........DSCH113-M020..........DSCH113-M050..........DSCH113-M100..........DSCH113-M200..........DSCh113-M500..........

11-38D 336 065/611-38D 336 065/511-38D 336 065/411-38D 336 065/311-38D 336 065/211-38D 336 065/1

0.65 [16.5]TYP

1.25 [31.8]

0.70 [17.8] 1.60 [40.6]

3.00 [76.2]

0.56 [14.2]TYP

1.00 [25.4]

2.00 [50.8]

4.00 [101.6]

1.00 [25.4]

1.50 [38.1]

0.63 [15.9]

ShimsDrawings are not to scale Sets are bulk shipped Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

(1) .060 inch, (2) .030 inch, (2) .015 inch


Five piece inch shim set..........DSCH111-E155............ .150 inch........


Five piece inch shim set..........DSCH112-E155............ .150 inch........ (1) .060 inch, (2) .030 inch, (2) .015 inch

0.10mm..........0.20mm..........0.50mm..........1.00mm..........2.00mm..........5.00mm..........

DSCH114 Series ShimsDSC Part No. Thickness Other part numbersDSCH114-M010..........DSCH114-M020..........DSCH114-M050..........DSCH114-M100..........DSCH114-M200..........DSCH114-M500..........

11-38D 336 066/611-38D 336 066/511-38D 336 066/411-38D 336 066/311-38D 336 066/211-38D 336 066/1


Five piece metric shim set.......DSCH113-M505........... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

.59 [15.0]

2.56 [65.0]

0.39 [10.0]

.79 [20.0]

0.35 [9.0]

0.39 [10.0]

0.35 [9.0] 0.59 [15.0]

.79 [20.0]

1.97 [50.0]

0.39 [10.0]


Five piece metric shim set.......DSCH114-M505........... (1) 2.00mm, (2) 1.00mm, (2) .50mm5.00mm..........

2015


Page 34

DSCH115 Series ShimsDSC Part No. Thickness Other part numbersDSCH115-M010..........DSCH115-M020..........DSCH115-M025..........DSCH115-M050..........DSCH115-M100..........DSCH115-M200..........DSCH115-M500..........

11-38D 495 551/6, 5 279 66511-38D 495 551/5

11-38D 495 551/4, 5 279 66611-38D 495 551/3, 5 279 66711-38D 495 551/2, 5 279 66811-38D 495 551/1

0.10MM..........0.20MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........5.00MM..........

1.97 [50.0]

0.39 [10.0]

0.39 [10.0]


Five piece metric shim set.......Seven piece metric shim set...

DSCH115-M505...........DSCH115-M507...........

5.00mm..........5.00mm..........

(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH116 Series ShimsDSC Part No. Thickness Other part numbersDSCH116-M010..........DSCH116-M025..........DSCH116-M050..........DSCH116-M100..........DSCH116-M200..........

3 699 426

3 699 4273 699 4283 699 429

0.10MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........



DSCH116-M505...........DSCH116-M507...........

5.00mm..........5.00mm..........

(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

0.35 [9.0]

0.39 [10.0]0.79 [20.0]

0.29 [7.5]

1.77 [45.0]

DSCH117 Series ShimsDSC Part No. Thickness Other part numbersDSCH117-M010..........DSCH117-M025.........DSCH117-M050..........DSCH117-M100..........DSCH117-M200..........

3 699 430

3 699 4313 699 4323 699 433

0.10MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........



DSCH117-M505...........DSCH117-M507...........

5.00mm..........5.00mm..........

(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

0.35 [9.0]

1.97 [50.0]0.59 [15.0]

0.59 [15.0]


3 699 434

3 699 4353 699 4363 699 437

0.10MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........



DSCH118-M505...........DSCH118-M507...........

5.00mm..........5.00mm..........

(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

0.59 [15.0]0.35 [9.0]

0.39 [10.0]

1.18 [30.0]

0.29 [7.5]

0.79 [20.0]

0.59 [15.0]

0.39 [10.0]

2.36 [60.0]0.29 [7.5]

0.79 [20.0]

0.35 [9.0]



2015


Page 35

DSCH120 Series ShimsDSC Part No. Thickness Other part numbersDSCH120-M025..........DSCH120-M050..........DSCH120-M100..........DSCH120-M200..........

TYPE 2-T025, DSC1938-51TYPE 2-T050, DSC1938-52TYPE 2-T100, DSC1938-53TYPE 2-T200, DSC1938-54

0.25MM..........0.50MM..........1.00MM..........2.00MM..........

0.41 [10.5]

0.37 [9.5]

.75 [19.0]

0.71 [18.0]

0.34 [9.0] .79 [20.0]

0.41 [10.5]

1.50 [38.0].75 [19.0]

1.89 [48.0]

.41 [10.5]

.75 [19.0]

0.34 [9.0] 0.59 [15.0]TYP

2.48 [63.0].41 [10.5]

75 [19.0]

0.34 [9.0] .59 [15.0]TYP

.37 [9.5]

0.37 [9.5]

0.37 [9.5]



0.25MM..........0.50MM..........1.00MM..........2.00MM..........



0.25MM..........0.50MM..........1.00MM..........2.00MM..........



0.25MM..........0.50MM..........1.00MM..........2.00MM..........



DSCH119-M505...........DSCH119-M507...........

5.00mm..........5.00mm..........

(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm



DSCH120-M505...........DSCH120-M507...........

5.00mm..........5.00mm..........

(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm



DSCH121-M505...........DSCH121-M507...........

5.00mm..........5.00mm..........

(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm



DSCH122-M505...........DSCH122-M507...........

5.00mm..........5.00mm..........

(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm



2015


Page 36


3 193 188

3 193 1893 193 1903 193 191

0.10MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........


3 193 192

3 193 1933 193 1943 193 195

0.10MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........


3 193 196

3 193 1973 193 1983 193 199

0.10MM..........0.25MM0.50MM..........1.00MM..........2.00MM..........

1.18 [30.0]

0.30 [7.5]

0.35 [9.0]

0.59 [15.0]

0.59 [15.0]

0.59 [15.0]

0.59 [15.0]

0.30 [7.5]

0.30 [7.5]

0.59 [15.0]

0.59 [15.0]

0.35 [9.0]

0.35 [9.0]

1.77 [45.0]

2.36 [60.0]



DSCH123-M505...........DSCH123-M507...........

5.00mm..........5.00mm..........

(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm



DSCH124-M505...........DSCH124-M507...........

5.00mm..........5.00mm..........

(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH125Series - Shim SetsDSC Part No. Description Thickness Set includes


DSCH125-M505...........DSCH125-M507...........

5.00mm..........5.00mm..........

(1) 2.00mm, (2) 1.00mm, (2) .50mm(1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

0.30 [7.5]

0.30 [7.5]

0.30 [7.5]



2015


Page 37

2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........5.75mm..........6.00mm..........

DSCP001 Series SpacersDSC Part No. Thickness Other part numbersDSCP001-M200..........DSCP001-M225..........DSCP001-M250..........DSCP001-M275..........DSCP001-M300..........DSCP001-M325..........DSCP001-M350..........DSCP001-M375..........DSCP001-M400..........DSCP001-M425..........DSCP001-M450..........DSCP001-M475..........DSCP001-M500..........DSCP001-M525..........DSCP001-M550..........DSCP001-M575..........DSCP001-M600..........

FSD 39279-64FSD 39279-65FSD 39279-66FSD 39279-67FSD 39279-51FSD 39279-52FSD 39279-53FSD 39279-54FSD 39279-55FSD 39279-56FSD 39279-57FSD 39279-58FSD 39279-59FSD 39279-60FSD 39279-61FSD 39279-62FSD 39279-63




Ø0.44 [11.2]TYP 1.72 [43.7]

1.00 [25.4]

0.90 [22.9]0.41 [10.4]

0.75 [19.1]

1.38 [35.1]Ø0.37 [9.4]TYP

0.40 [10.2] 0.58 [14.7]

SPACERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted


Not black oxided

Not black oxided

Fiber Optic Laser CuttingDouglas Stamping Company uses a 2 kilowatt diode pumped fiber optic laser cutting systemin addition to our traditional dies and presses. For longer running jobs and those requiringbending and drawing, hard-tooled dies are still the most economical way to produce a widevariety of products. For shorter runs and hard or unusual materials, laser cutting offersgreater flexibility and much quicker turn-around.

This state-of-the-art system combines extreme reliability with lower overhead than traditionallaser systems, allowing us to quickly and accurately produce shims, spacers, washers, rings,gaskets and other specialty and custom items. We can cleanly and accurately cut most anymetal with this system, including copper, brass and titanium.

We are pleased to quote to your drawings. Please send inquiries to us by email [email protected], FAX at 248 542-3287, or call 542-3940 to discuss yourrequirements.

2015


Page 38




DSCP003 Series SpacersDSC Part No. Thickness Other part numbers


DSCP003-M200..........DSCP003-M225..........DSCP003-M250..........DSCP003-M275..........DSCP003-M300..........DSCP003-M325..........DSCP003-M350..........DSCP003-M375..........DSCP003-M400..........DSCP003-M425..........DSCP003-M450..........DSCP003-M475..........DSCP003-M500..........DSCP003-M525..........DSCP003-M550..........DSCP003-M575..........DSCP003-M600..........










Ø0.44 [11.2]TYP 2.50 [63.5]

1.00 [25.4]

0.81 [20.6]TYP

0.44 [11.2]

Ø0.41 [11.2]

0.88 [22.2]

1.00 [25.4]

Ø0.41 [10.4]TYP

0.88 [22.2]0.44 [11.2]

1.75 [44.5]

0.88 [22.4]

Ø0.41 [10.4]TYP 2.00 [50.8]

0.44 [11.2] 1.13 [28.6]

0.88 [22.4]

Not black oxided



2015


Page 39
















Ø0.41 [10.4]TYP

0.88 [22.4]

2.25 [57.2]

0.44 [11.2] 0.69 [17.5]TYP

Ø0.41 [10.4]TYP

2.50 [63.5]

0.88 [22.4]

0.81 [20.6]TYP

0.44 [11.2]

Ø0.41 [10.4]TYP

0.88 [22.4]

3.00 [76.2]

0.44 [11.2] 1.06 [27.0]TYP

0.42 [10.7] 0.88 [22.2]TYP

0.88 [22.4]

3.50 [88.9]

Ø0.41 [10.4]TYP



2015


Page 40
















Ø0.44 [11.2]TYP

0.88 [22.4]

0.50 [12.7] 1.00 [25.4]TYP

4.00 [101.6]

Ø0.41 [10.4]

.16R TYP

0.74 [18.8]

0.98 [24.9]

1.26 [32.0]0.63 [16.0]

0.49 [12.4]

1.48 [37.6]

0.37 [9.4]

Ø0.41 [10.4]

1.12 [28.4]0.40 [10.2] TYP

0.64 [16.3]0.32 [8.1]

0.56 [14.2]2.00 [50.8]

1.00 [25.4]

1.25 [31.8]

Ø0.41 [10.4]

1.62 [41.1]0.40 [10.2] TYP

0.32 [8.1]0.64 [16.3]

0.81 [20.6]

2.50 [63.5]

1.25 [31.8]

1.25 [31.8]



2015


Page 41

DSCP015 Series SpacersDSC Part No. Thickness Other part #s



ASP330SASP332SASP334SASP336SASP338SASP340SASP342SASP344SASP346SASP348SASP350SASP352SASP354SASP356SASP358SASP360SASP362S

DSC Part No. Thickness Other part #s

6.40mm..........6.60mm..........6.80mm..........7.00mm..........

DSCP015-M640..........DSCP015-M660..........DSCP015-M680..........DSCP015-M700..........

ASP364SASP366SASP368SASP370S



DSCP016 Series SpacersDSC Part No. Thickness Other part #sDSCP016-M300..........DSCP016-M320..........DSCP016-M340..........DSCP016-M360..........DSCP016-M380..........DSCP016-M400..........DSCP016-M420..........DSCP016-M440..........DSCP016-M460..........DSCP016-M480..........DSCP016-M500..........DSCP016-M520..........DSCP016-M540..........DSCP016-M560..........DSCP016-M580..........DSCP016-M600..........DSCP016-M620..........



6.40mm..........6.60mm..........6.80mm..........7.00mm..........


0.79 [20.0]

DSC Part No. Thickness Other part #sDSCP017-M640..........DSCP017-M660..........DSCP017-M680..........DSCP017-M700..........

6.40mm..........6.60mm..........6.80mm..........7.00mm..........






DSC Part No. Thickness Other part #sDSCP018-M575..........DSCP018-M600..........

5.75mm..........6.00mm..........

FSD 40774-66FSD 40774-67





0.28 [7.0]

2.13 [54.0]

0.34 [8.7] TYP

0.49 [12.5]

0.44 [11.1]

0.87 [22.2]

0.25 [6.5]

1.34 [34.0]

0.35 [9.0]

0.79 [20.0]0.28 [7.0]

0.79 [20.0]

1.73 [44.0]

0.35 [9.0]

1.18 [30.0]0.28 [7.0]

1.42 [36.0]

1.57 [40.0]

0.31 [8.0] 0.79 [20.0]

0.35 [9.0] TYP

1.00 [25.4]



2015


Page 42

FSD 40776-66FSD 40776-67

DSC Part No. Thickness Other part #s0.50mm..........1.00mm..........2.00mm..........2.25mm..........2.50mm..........2.75mm..........3.00mm..........3.25mm..........3.50mm..........3.75mm..........4.00mm..........4.25mm..........4.50mm..........4.75mm..........5.00mm..........5.25mm..........5.50mm..........



DSCP020-M575..........DSCP020-M600..........

5.75mm..........6.00mm..........


FSD 40775-66FSD 40775-67




DSCP019-M575..........DSCP019-M600..........


5.75mm..........6.00mm..........








Ø.34 [8.7]

Ø.34 [8.7]TYP

Ø0.44 [11.2]

1.00 [25.4]

1.00 [25.4]

1.00 [25.4]

Ø0.44 [11.2]TYP 1.50 [38.1]

0.63 [15.9]0.44 [11.2]

0.50 [12.6]0.99 [25.2]

0.87 [22.2]

0.44 [11.1]

1.50 [38.1]0.75 [19.1]

0.34 [8.7] TYP

0.87 [22.2]

0.55 [14.0]TYP

0.45 [11.4]

2.00 [50.8]



2015


Page 43










0.25mm..........0.50mm..........1.00mm..........2.00mm..........3.00mm..........4.00mm..........5.00mm..........



DSCP026-M025..........DSCP026-M050..........DSCP026-M100..........DSCP026-M200..........DSCP026-M300..........DSCP026-M400..........DSCP026-M500..........




Ø0.44 [11.2]TYP

1.00 [25.4]

2.13 [54.0]

0.44 [11.2] 0.63 [15.9]TYP

Ø0.44 [11.2]TYP

0.44 [11.2] 0.63 [15.9]TYP

2.75 [69.9]

1.00 [25.4]

Ø0.44 [11.2]TYP

1.00 [25.4]

0.63 [15.9]TYP

3.50 [88.9]

1.19 [30.2]

Ø0.34 [8.6]

0.68 [17.1]

0.68 [17.1]



2015


Page 44

0.50mm..........1.00mm..........1.50mm..........2.00mm..........2.50mm..........3.00mm..........3.50mm..........4.00mm..........4.50mm..........5.00mm..........5.50mm..........6.00mm..........6.50mm..........7.00mm..........7.50mm..........8.00mm..........

DSCP028 Series SpacersDSC Part No. Thickness Other part numbersDSCP028-M050..........DSCP028-M100..........DSCP028-M150..........DSCP028-M200..........DSCP028-M250..........DSCP028-M300..........DSCP028-M350..........DSCP028-M400..........DSCP028-M450..........DSCP028-M500..........DSCP028-M550..........DSCP028-M600..........DSCP028-M650..........DSCP028-M700..........DSCP028-M750..........DSCP028-M800..........

41-502-1901, SAS 32740-0541-502-1902, SAS 32740-1041-502-1903, SAS 32740-1541-502-1904, SAS 32740-2041-502-1905, SAS 32740-2541-502-1906, SAS 32740-3041-502-1907, SAS 32740-3541-502-1908, SAS 32740-4041-502-1909, SAS 32740-4541-502-1910, SAS 32740-5041-502-1911, SAS 32740-5541-502-1912, SAS 32740-6041-502-1913, SAS 32740-6541-502-1914, SAS 32740-7041-502-1915, SAS 32740-7541-502-1916, SAS 32740-80


0.25mm..........0.50mm..........1.00mm..........2.00mm..........3.00mm..........4.00mm..........5.00mm..........

DSCP027-M025..........DSCP027-M050..........DSCP027-M100..........DSCP027-M200..........DSCP027-M300..........DSCP027-M400..........DSCP027-M500..........



DSCP029 Series SpacersDSC Part No. Thickness Other part numbersDSCP029-M050..........DSCP029-M100..........DSCP029-M150..........DSCP029-M200..........DSCP029-M250..........DSCP029-M300..........DSCP029-M350..........DSCP029-M400..........DSCP029-M450..........DSCP029-M500..........DSCP029-M550..........DSCP029-M600..........DSCP029-M650..........DSCP029-M700..........DSCP029-M750..........DSCP029-M800..........




DSCP030-M050..........DSCP030-M100..........DSCP030-M150..........DSCP030-M200..........DSCP030-M250..........DSCP030-M300..........DSCP030-M350..........DSCP030-M400..........DSCP030-M450..........DSCP030-M500..........DSCP030-M550..........DSCP030-M600..........DSCP030-M650..........DSCP030-M700..........DSCP030-M750..........DSCP030-M800..........


0.34 [8.6]

0.68 [17.1]

0.68 [17.1]

1.63 [41.3]0.39 [9.9] TYP

Ø0.34 [8.6]TYP

0.13 [3.2] TYP

1.06 [26.9]

0.49 [12.4]

0.45 [11.5]TYP

0.42 [10.7]

Ø0.34 [8.6]TYP 2.00 [50.8]

1.06 [26.9]0.49 [12.4]

0.45 [11.5]TYP

0.34 [8.7]

Ø0.34 [8.6]TYP

1.63 [41.3]

1.50 [38.1]

0.49 [12.4]

0.45 [11.5]TYP

0.42 [10.7]

0.34 [8.7]



2015


Page 45


0.50mm..........1.00mm..........1.50mm..........2.00mm..........4.50mm..........

DSCP032-M050..........DSCP032-M100..........DSCP032-M150..........DSCP032-M200..........DSCP032-M450..........

FS 21-09-0105FS 21-09-0110FS 21-09-0115FS 21-09-0120FS 21-09-0145



DSCP031-M050..........DSCP031-M100..........DSCP031-M150..........DSCP031-M200..........DSCP031-M250..........DSCP031-M300..........DSCP031-M350..........DSCP031-M400..........DSCP031-M450..........DSCP031-M500..........DSCP031-M550..........DSCP031-M600..........DSCP031-M650..........DSCP031-M700..........DSCP031-M750..........DSCP031-M800..........


0.50mm..........1.00mm..........1.50mm..........2.00mm..........4.50mm..........

DSCP033 Series SpacersDSC Part No. Thickness Other part numbersDSCP033-M050..........DSCP033-M100..........DSCP033-M150..........DSCP033-M200..........DSCP033-M450..........

FS 21-09-0305FS 21-09-0310FS 21-09-0315FS 21-09-0320FS 21-09-0345

DSC Part No. Thickness Other part #sDSCP034 Series SpacersDSC Part No. Thickness Other part #s




ACS330SACS332SACS334SACS336SACS338SACS340SACS342SACS344SACS346SACS348SACS350SACS352SACS354SACS356SACS358SACS360SACS362S

6.40mm..........6.60mm..........6.80mm..........7.00mm..........

ACS364SACS366SACS368SACS370S

0.42 [10.7]TYP

0.34 [8.6] TYP0.30 [7.6]

0.45 [11.4] TYP

2.00 [50.8]

1.66 [42.2]0.40 [10.2]2.50 [63.5]

0.40 [10.2]TYP

0.58 [14.6] 1.00 [25.4]TYP

3.15 [80.0]

0.50 [12.7]

1.00 [25.4]

1.00 [25.4]

0.40 [10.2]TYP

0.50 [12.7]

2.00 [50.8]

0.40 [10.2] 0.60 [15.2] TYP

4.33 [110.0]

0.41 [10.5] TYP

1.58 [40.0]

0.79 [20.0]

4.33 [110.0]

1.38 [35.0]TYP

0.79 [20.0]



2015


Page 46



ACS630ACS632ACS634ACS636ACS638ACS640ACS642ACS644ACS646ACS648ACS650ACS652ACS654ACS656ACS658ACS660ACS662


6.40mm..........6.60mm..........6.80mm..........7.00mm..........

ACS664ACS666ACS668ACS670




DSCP036-M560..........DSCP036-M580..........DSCP036-M600..........DSCP036-M620..........DSCP036-M640..........DSCP036-M660..........DSCP036-M680..........DSCP036-M700..........

ASP330NASP332NASP334NASP336NASP338NASP340NASP342NASP344NASP346NASP348NASP350NASP352NASP354N

ASP356NASP358NASP360NASP362NASP364NASP366NASP368NASP370N

5.60mm..........5.80mm..........6.00mm..........6.20mm..........6.40mm..........6.60mm..........6.80mm..........7.00mm..........








Ø0.35 [9.0]TYP

Ø0.35 [9.0] TYP

0.31 [8.0] 0.59 [15.0]TYP

1.81 [46.0]

0.79 [20.0]

0.79 [20.0]

0.59 [15.0] TYP0.31 [8.0]

2.40 [61.0]

1.18 [30.0] 1.18 [30.0]0.79 [20.0]

Ø0.75 [19.0](4) PLCS

Ø0.41 [10.5](4) PLCS

0.69 [17.5] 2.56 [65.0]

3.94 [100.0]

2.56 [65.0]

0.69 [17.5]

3.94 [100.0]

1.38 [35.0]

2.76 [70.0]



2015


Page 47




56ZF28047-0156ZF28047-0256ZF28047-0356ZF28047-0456ZF28047-0556ZF28047-0656ZF28047-0756ZF28047-0856ZF28047-0956ZF28047-1056ZF28047-1156ZF28047-1256ZF28047-1356ZF28047-1456ZF28047-1556ZF28047-1656ZF28047-17







Ø0.41 [10.4]TYP

Ø0.41 [10.4]TYP

1.81 [46.0]

0.32 [8.0] 0.59 [15.0]TYP

0.98 [25.0]

Ø0.41 [10.4]TYP

1.77 [45.0]

1.00 [25.4]

1.00 [25.4]0.38 [9.7]







Ø0.35 [9.0]TYP 1.97 [50.0]

1.57 [40.0]

0.35 [9.0]

0.59 [15.0]TYP

0.39 [10.0]

2.28 [58.0]

2.40 [61.0]

0.98 [25.0]

0.31 [8.0] 0.59 [15.0]TYP



2015


Page 48














Ø0.41 [10.4]TYP 2.75 [69.9]

1.00 [25.4]

1.00 [25.4]TYP

0.38 [9.7]

Ø0.41 [10.4]TYP

2.48 [63.0]

1.96 [49.8]

0.36 [9.1]1.77 [45.0]

0.39 [9.9]

0.60 [15.2]TYP

Ø0.41 [10.4]TYP

5.00 [127.0]

2.25 [57.2]

0.47 [11.9] 4.13 [104.9]

0.41 [10.4]

0.71 [18.0]TYP

Ø0.34 [8.6]TYP

1.50 [38.1]

1.00 [25.4]

0.45 [11.4]TYP

0.30 [7.6]



2015


Page 49

















Ø0.34 [8.6]TYP

Ø0.41 [10.4]TYP

1.00 [25.4]

1.88 [47.8]

0.27 [6.9] 0.45 [11.4]TYP

6.00 [152.4]

0.50 [12.7] 1.00 [25.4]TYP

1.00 [25.4]

Ø0.34 [8.6]TYP

5.00 [127.0]

0.63 [15.9]TYP

0.38 [9.5]

4.00 [101.6]0.50 [12.7]

2.00 [50.8]

Ø0.34 [8.6]TYP 0.45 [11.4]

TYP

1.00 [25.4]

1.75 [44.5]0.38 [9.5]

1.75 [44.5]

2.50 [63.5]



2015


Page 50

Ø0.41 [10.5]TYP

0.25mm..........0.50mm..........1.00mm..........2.00mm..........3.00mm..........3.20mm..........3.40mm..........3.60mm..........3.80mm..........4.00mm..........4.20mm..........4.40mm..........4.60mm..........4.80mm..........5.00mm..........5.20mm..........5.40mm..........5.60mm..........5.80mm..........6.00mm..........6.20mm..........6.40mm..........6.60mm..........6.80mm..........7.00mm..........

DSCP050 Series SpacersDSC Part No. Thickness Other part numbersDSCP050-M025..........DSCP050-M050..........DSCP050-M100..........DSCP050-M200..........DSCP050-M300..........DSCP050-M320..........DSCP050-M340..........DSCP050-M360..........DSCP050-M380..........DSCP050-M400..........DSCP050-M420..........DSCP050-M440..........DSCP050-M460..........DSCP050-M480..........DSCP050-M500..........DSCP050-M520..........DSCP050-M540..........DSCP050-M560..........DSCP050-M580..........DSCP050-M600..........DSCP050-M620..........DSCP050-M640..........DSCP050-M660..........DSCP050-M680..........DSCP050-M700..........

ASP302ASP305ASP310ASP320ASP330, FSD 41294-51, SP1-30, 41-502-2200, 56ZF28047-101ASP332, FSD 41294-52, SP1-32, 41-502-2201, 56ZF28047-102ASP334, FSD 41294-53, SP1-34, 41-502-2202, 56ZF28047-103ASP336, FSD 41294-54, SP1-36, 41-502-2203, 56ZF28047-104ASP338, FSD 41294-55, SP1-38, 41-502-2204, 56ZF28047-105ASP340, FSD 41294-56, SP1-40, 41-502-2205, 56ZF28047-106ASP342, FSD 41294-57, SP1-42, 41-502-2206, 56ZF28047-107ASP344, FSD 41294-58, SP1-44, 41-502-2207, 56ZF28047-108ASP346, FSD 41294-59, SP1-46, 41-502-2208, 56ZF28047-109ASP348, FSD 41294-60, SP1-48, 41-502-2209, 56ZF28047-110ASP350, FSD 41294-61, SP1-50, 41-502-2210, 56ZF28047-111ASP352, FSD 41294-62, SP1-52, 41-502-2211, 56ZF28047-112ASP354, FSD 41294-63, SP1-54, 41-502-2212, 56ZF28047-113ASP356, FSD 41294-64, SP1-56, 41-502-2213, 56ZF28047-114ASP358, FSD 41294-65, SP1-58, 41-502-2214, 56ZF28047-115ASP360, FSD 41294-66, SP1-60, 41-502-2215, 56ZF28047-116ASP362, FSD 41294-67, SP1-62, 41-502-2216, 56ZF28047-117ASP364, FSD 41294-68, SP1-64, 41-502-2217, 56ZF28047-118ASP366, FSD 41294-69, SP1-66, 41-502-2218, 56ZF28047-119ASP368, FSD 41294-70, SP1-68, 41-502-2219, 56ZF28047-120ASP370, FSD 41294-71, SP1-70, 41-502-2220, 56ZF28047-121


DSCP051 Series SpacersDSC Part No. Thickness Other part numbersDSCP051-M025..........DSCP051-M050..........DSCP051-M100..........DSCP051-M200..........DSCP051-M300..........DSCP051-M320..........DSCP051-M340..........DSCP051-M360..........DSCP051-M380..........DSCP051-M400..........DSCP051-M420..........DSCP051-M440..........DSCP051-M460..........DSCP051-M480..........DSCP051-M500..........DSCP051-M520..........DSCP051-M540..........DSCP051-M560..........DSCP051-M580..........DSCP051-M600..........DSCP051-M620..........DSCP051-M640..........DSCP051-M660..........DSCP051-M680..........DSCP051-M700..........


Ø0.41 [10.5]TYP

ASP502, DSC502ASP505, DSC505ASP510, DSC510ASP520, DSC520ASP530, DSC530ASP532, DSC532ASP534, DSC534ASP536, DSC536ASP538, DSC538ASP540, DSC540ASP542, DSC542ASP544, DSC544ASP546, DSC546ASP548, DSC548ASP550, DSC550ASP552, DSC552ASP554, DSC554ASP556, DSC556ASP558, DSC558ASP560, DSC560ASP562, DSC562ASP564, DSC564ASP566, DSC566ASP568, DSC568ASP570, DSC570


DSCP052-M025..........DSCP052-M050..........DSCP052-M100..........DSCP052-M200..........DSCP052-M300..........DSCP052-M320..........DSCP052-M340..........DSCP052-M360..........DSCP052-M380..........DSCP052-M400..........DSCP052-M420..........DSCP052-M440..........DSCP052-M460..........DSCP052-M480..........DSCP052-M500..........DSCP052-M520..........DSCP052-M540..........DSCP052-M560..........DSCP052-M580..........DSCP052-M600..........DSCP052-M620..........DSCP052-M640..........DSCP052-M660..........DSCP052-M680..........DSCP052-M700..........


Ø0.41 [10.5]TYP

1.81 [46.0]

0.59 [15.0]TYP

0.32 [8.0]

0.98 [25.0]

0.59 [15.0]TYP

0.31 [8.0]

2.40 [61.0]

0.98 [25.0]

0.31 [8.0] 0.59 [15.0]TYP

2.99 [76.0]

0.98 [25.0]



2015


Page 51




DSCP053-M025..........DSCP053-M050..........DSCP053-M100..........DSCP053-M200..........DSCP053-M300..........DSCP053-M320..........DSCP053-M340..........DSCP053-M360..........DSCP053-M380..........DSCP053-M400..........DSCP053-M420..........DSCP053-M440..........DSCP053-M460..........DSCP053-M480..........DSCP053-M500..........DSCP053-M520..........DSCP053-M540..........DSCP053-M560..........DSCP053-M580..........DSCP053-M600..........DSCP053-M620..........DSCP053-M640..........DSCP053-M660..........DSCP053-M680..........DSCP053-M700..........

Ø0.41 [10.5]TYP


.125 inch........DSCP054-E125.......... FSD 14237

.125 inch........

DSCP056 Series SpacersDSC Part No. Thickness Other part numbersDSCP056-E125.......... FSD 14235

DSCP055 Series SpacersDSC Part No. Thickness Other part numbersDSCP055-E125.......... .125 inch........ FSD 14236

Ø0.25

Ø0.39

Ø0.34(2) PLCS

Ø0.25

1.00

Ø0.53(2) PLCS

Ø0.25

DSCP057 Series SpacersDSC Part No. Thickness Other part numbersDSCP057-E125.......... FSD 14240.125 inch........

Ø0.39Ø0.25(2) PLCS

0.59 [15.0]TYP

0.39 [10.0]

0.35 [9.0]

1.77 [45.0]2.48 [63.0]

1.97 [50.0]

0.16 1.10

0.42

1.95 1.12

0.582.26

0.32

0.37

0.39 0.84

0.141.630.90

0.72

0.320.58

1.63 0.94

0.36

1.100.16

3.06

1.121.11

0.84

0.37

0.39

0.320.58

1.12

2.881.600.34

0.50

2.131.22

0.32 [8.1]0.58



2015


Page 52


.062 inch........

.125 inch........DSCP058-E062..........DSCP058-E125..........

FSD 14131-51FSD 14131-52

.062 inch........

.125 inch........

DSCP060 Series SpacersDSC Part No. Thickness Other part numbersDSCP060-E062..........DSCP060-E125..........

FSD 14137-51FSD 14137-52

.062 inch........

.125 inch........


FSD 14139-51FSD 14139-52


.062 inch........

.125 inch........DSCP064-E062..........DSCP064-E125..........

FSD 14141-51FSD 14141-52

.062 inch........

.125 inch........


FSD 14136-51FSD 14136-52


.062 inch........

.125 inch........DSCP061-E062..........DSCP061-E125..........

FSD 14138-51FSD 14138-52


.062 inch........

.125 inch........DSCP063-E062..........DSCP063-E125..........

FSD 14140-51FSD 14140-52


.062 inch........

.125 inch........DSCP065-E062..........DSCP065-E125..........

FSD 14142-51FSD 14142-52

1.25 [31.8]0.63 [16.0]

0.62 [15.7]1.86 [47.2]

1.25 [31.8]0.63 [16.0]

0.94 [23.9]1.88 [47.8]

0.63 [16.0]

2.25 [57.2]1.12 [28.4]

1.25 [31.8] 1.25 [31.8]

2.62 [66.5]0.62 [15.7]

0.63 [16.0]

1.25 [31.8]

1.37 [34.8]

2.75 [69.9]

0.63 [16.0]

1.25 [31.8]

0.62 [15.7]2.87 [72.9]

0.63 [16.0]

0.63 [16.0]

1.25 [31.8]

1.63 [41.4]

3.25 [82.6]

1.25 [31.8]

1.88 [47.8]

3.75 [95.3]

0.63 [16.0]

Ø0.88 [22.3]Ø0.88 [22.3]

Ø0.88 [22.3] Ø0.88 [22.3]

Ø0.88 [22.3] Ø0.88 [22.3]

Ø0.88 [22.3] Ø0.88 [22.3]


2015


Page 53

.062 inch........

.125 inch........

.062 inch........

.125 inch........

FSD 14174-51FSD 14174-52

FSD 14147-51FSD 14147-52

.062 inch........

.125 inch........

.062 inch........

.125 inch........

FSD 14145-51FSD 14145-52

FSD 14143-51FSD 14143-52


.062 inch........

.125 inch........

.062 inch........

.125 inch........


DSCP073-E062..........DSCP073-E125..........

DSCP071-E062..........DSCP071-E125..........

FSD 14175-51FSD 14175-52

FSD 14148-51FSD 14148-52

.062 inch........

.125 inch........


FSD 14146-51FSD 14146-52


.062 inch........

.125 inch........DSCP067-E062..........DSCP067-E125..........

FSD 14144-51FSD 14144-52



DSCP072-E062..........DSCP072-E125..........

DSCP070-E062..........DSCP070-E125..........



DSCP068-E062..........DSCP068-E125..........

DSCP066-E062..........DSCP066-E125..........

Ø0.88 [22.4]Ø0.88 [22.4]TYP

0.63 [15.9]

2.24 [56.9]

3.48 [88.4]

0.63 [15.9]

1.25 [31.8]

Ø0.88 [22.4]TYP

Ø0.88 [22.4]

2.25 [57.2]

0.63 [15.9]2.50 [63.5]

0.63 [15.9]

Ø0.88 [22.4]

2.62 [66.5]

0.76 [19.3]3.00 [76.2]

0.62 [15.7]

1.87 [47.5]

0.63 [15.9]2.50 [63.5]

0.63 [15.9]

Ø0.88 [22.4]TYP

0.62 [15.7]

2.61 [66.3]

3.98 [101.1]

0.68 [17.3]

1.25 [31.8]

Ø0.88 [22.4]

1.25 [31.8]0.63 [15.9]

2.25 [57.2]

4.50 [114.3]

Ø0.88 [22.4]TYP

1.25 [31.8]

0.75 [19.1]

3.00 [76.2]

4.50 [114.3]

0.63 [15.9]

0.63 [15.9]

1.75 [44.5]

1.25 [31.8]

3.50 [88.9]


2015


Page 54



.25 inch..........

.32 inch..........DSCP080-E320..........

DSCP078-E250..........

FSD 40880

FSD 40879



.062 inch........

.125 inch........

.18 inch..........DSCP076-E180..........

DSCP074-E062..........DSCP074-E125..........

FSD 40878

FSD 14219-51FSD 14219-52


.25 inch..........

.32 inch..........

DSCP081 Series SpacersDSC Part No. Thickness Other part numbersDSCP081-E320..........

DSCP079-E250..........

FSD 40919

FSD 40918


.18 inch..........DSCP077-E180.......... FSD 40917

.062 inch........

.125 inch........


FSD 14230-51FSD 14230-52

Ø0.88

Ø1.06

Ø0.34TYP

Ø0.34TYP

Ø1.06

Ø1.44

Ø0.34TYP

Ø0.34TYP

Ø1.94

R0.19TYP Ø0.38

TYP

Ø1.94

Ø0.88 [22.4]TYP

1.24 [31.5]

0.56 [14.2]3.38 [85.9]

4.50 [114.3]

0.63 [15.9]

1.25

3.25

1.08TYP

0.63

0.121.08TYP

3.25

0.62

1.25

0.12

1.00TYP

2.62

Ø1.44

2.62

1.00TYP

0.78TYP

2.25

0.12

0.78TYP

2.25

0.751.50

0.751.50


2015


Page 55


.32 inch..........DSCP083-E320.......... FSD 40920


.32 inch..........DSCP082-E320.......... FSD 40881

Ø2.44

R0.26TYP

Ø0.52TYP

Ø2.44


2.00mm..........2.20mm..........2.25mm..........2.40mm..........2.50mm..........2.60mm..........2.75mm..........2.80mm..........3.00mm..........3.20mm..........3.25mm..........3.40mm..........3.50mm..........3.60mm..........3.75mm..........3.80mm..........4.00mm..........4.12mm..........4.20mm..........4.25mm..........4.38mm..........4.40mm..........4.50mm..........4.60mm..........4.62mm..........4.75mm..........4.80mm..........4.88mm..........5.00mm..........5.12mm..........5.20mm..........5.25mm..........5.38mm..........5.40mm..........5.50mm..........5.60mm..........

DSCP084-M200..........DSCP084-M220..........DSCP084-M225..........DSCP084-M240..........DSCP084-M250..........DSCP084-M260..........DSCP084-M275..........DSCP084-M280..........DSCP084-M300..........DSCP084-M320..........DSCP084-M325..........DSCP084-M340..........DSCP084-M350..........DSCP084-M360..........DSCP084-M375..........DSCP084-M380..........DSCP084-M400..........DSCP084-M412..........DSCP084-M420..........DSCP084-M425..........DSCP084-M438..........DSCP084-M440..........DSCP084-M450..........DSCP084-M460..........DSCP084-M462..........DSCP084-M475..........DSCP084-M480..........DSCP084-M488..........DSCP084-M500..........DSCP084-M512..........DSCP084-M520..........DSCP084-M525..........DSCP084-M538..........DSCP084-M540..........DSCP084-M550..........DSCP084-M560..........

DSCP084-M562..........DSCP084-M575..........DSCP084-M580..........DSCP084-M588..........DSCP084-M600..........DSCP084-M612..........DSCP084-M620..........DSCP084-M625..........DSCP084-M638..........DSCP084-M640..........DSCP084-M650..........DSCP084-M660..........DSCP084-M662..........DSCP084-M675..........DSCP084-M680..........DSCP084-M688..........DSCP084-M700..........DSCP084-M712..........DSCP084-M720..........DSCP084-M725..........DSCP084-M738..........DSCP084-M740..........DSCP084-M750..........DSCP084-M760..........DSCP084-M775..........DSCP084-M780..........DSCP084-M788..........DSCP084-M800..........

D113022, D113085D113086D113023D113087D113024D113088D113025D113089D113026, D113090D113091D113027D113092D113028D113093D113029D113094D113030, D113095D113031D113096D113032D113033D113097D113034D113098D113035D113036D113099D113037D113038, D113100D113039D113101D113040D113041D113102D113042D113103

5.62mm..........5.75mm..........5.80mm..........5.88mm..........6.00mm..........6.12mm..........6.20mm..........6.25mm..........6.38mm..........6.40mm..........6.50mm..........6.60mm..........6.62mm..........6.75mm..........6.80mm..........6.88mm..........7.00mm..........7.12mm..........7.20mm..........7.25mm..........7.38mm..........7.40mm..........7.50mm..........7.60mm..........7.75mm..........7.80mm..........7.88mm..........8.00mm..........

D113043D113044D113104D113045D113046, D113105D113047D113106D113048D113049D113107D113050D113108D113051D113052D113109D113053D113054, D113110D113055D113111D113056D113057D113112D113058D113113D113060D113114D113061D113062, D113115





D233007D233008D233009D233010D233011D233012D233013D233014D233015D233016D233017D233018D233019D233020D233021D233022D233023

6.40mm..........6.60mm..........6.80mm..........7.00mm..........

D233024D233025D233026D233027

0.59 [15.0] 1.18 [30.0]TYP

0.45 [11.3]

2.36 [60.0]3.25 [82.6]

3.54 [90.0]

Ø0.41 [10.5]TYP

Ø0.44 [11.2]TYP

3.25 [82.6] 2.25 [57.2]

0.50 [12.7]

1.25 [31.8]TYP

3.50 [88.9]

0.50 [12.7]

4.00

0.81

1.63

1.41 TYP0.12

1.41 TYP

1.63

0.81

4.00



2015


Page 56


3.00mm..........4.00mm..........5.00mm..........6.00mm..........7.00mm..........8.00mm..........

DSCP086-M300..........DSCP086-M400..........DSCP086-M500..........DSCP086-M600..........DSCP086-M700..........DSCP086-M800..........

D101044D101045D101046D101047D101048D101049




ACS630SACS632SACS634SACS636SACS638SACS640SACS642SACS644SACS646SACS648SACS650SACS652SACS654SACS656SACS658SACS660SACS662S


6.40mm..........6.60mm..........6.80mm..........7.00mm..........

ACS664SACS666SACS668SACS670S


.25 inch..........DSCP088-E250.......... D113069

.25 inch..........

DSCP089 Series SpacersDSC Part No. Thickness Other part numbersDSCP089-E250.......... D113070

Ø0.41 [10.4]TYP 2.00 [50.8]

1.00 [25.4]

0.50 [12.7] 1.00 [25.4]

0.50 [12.7]

Ø0.56 [14.2]TYP

Ø0.56 [14.2]TYP

4.50 [114.3]

0.75 [19.1] 3.00 [76.2]

1.50 [38.1]

0.75 [19.1]

4.00 [101.6]2.50 [63.5]0.75 [19.1]

1.50 [38.1]

0.75 [19.1]


Ø0.41[10.5]TYP

0.79 [20.0]

2.76 [70.0]

4.33 [110.0]

0.79 [20.0] 1.38 [35.0] TYP

4.33 [110.0]

2015


Page 57

.25 inch..........


.25 inch..........


Ø0.56 [14.2]TYP

1.50 [38.1]

0.75 [19.1] 3.50 [88.9]

5.00 [127.0]

0.75 [19.1]

Ø0.56 [14.2]TYP

0.75 [19.1]

7.50 [190.5]

9.00 [228.6]

0.75 [19.1]

1.50 [38.1]

SPACERS and RETAINERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

.39 [10]

1.18 [30] 1.97 [50]

2.36 [60]

1.18 [30]Ø.41 [10.5]















.79 [20]

1.58 [40]

1.18 [30] 2.36 [60]

2.24 [57]

2.99 [76]

Ø1.65 [42]

Ø.35 [9]

2015


Page 58

.18 inch..........

DSCR001 Series RetainersDSC Part No. Thickness Other part numbersDSCR001-E180.......... M 1077

.18 inch..........


.18 inch..........


Ø0.50 [12.7]

Ø0.28 [7.1](2) PLCS

1.25 [31.8]

2.00 [50.8]

0.38 [9.5]

0.38 [9.5]

0.25 [6.4]

0.75 [19.1]0.75 [19.1]

Ø0.53 [13.5]TYP

4.00 [101.6]

0.75 [19.1]

2.00 [50.8]1.00 [25.4]

1.50 [38.1]

R1.00 [25.4]

Ø0.56 [14.2]TYP

3.50 [88.9]

2.26 [57.4]

0.63 [15.9]

1.25 [31.8]

0.63 [15.9]

0.25 [6.4]

RETAINERSDrawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

.75 [10.1]

Genuine DSC is Made in USAThe "DSC" prefixing our part numbers stands for Douglas Stamping Company . GenuineDSC components purchased from us are manufactured in the U.S.A., in the DetroitMetropolitan region.

We are aware of other companies selling sub-standard and imported shim, spacer andwasher substitutes using our part numbers. You may be assured that DSC componentspurchased from us and from our qualified re-sellers are genuine.

2015


Page 59

0.250 ............0.312 ............0.312 ............0.312 ............0.250 ............0.250 ............

DSCR004 Series Serrated Retainer Plates (dimensions in inches)DSC Part No. A dim B dim C dim D dim E dim F dim Thickness Other part numbersDSCR004-E250..........DSCR005-E312..........DSCR006-E312..........DSCR007-E312..........DSCR008-E250..........DSCR009-E250..........

FSD 3399FSD 3850FSD 3851FSD 399956ZM 2359-156ZM 2359-6

0.03

90°

B

DC

A

Ø FTYP

E

2.00 .........3.25 .........2.25 .........3.50 .........2.50 .........2.25 .........

1.50 .........2.00 .........1.38 .........2.00 .........1.50 .........1.38 .........

1.00 .........2.00 .........1.12 .........2.00 .........1.50 .........1.13 .........

0.50 ........0.62 ........0.56 ........0.75 ........0.50 ........0.56 ........

0.75 ........1.00 ........0.69 ........1.00 ........0.75 ........0.69 ........

0.531 ..........0.687 ..........0.687 ..........0.812 ..........0.625 ..........0.562 ..........

DSCK001 Series KeeperDSC Part No. Thickness Other part numbers

DSCK002 Series KeeperDSC Part No. Thickness Other part numbers

DSCK001-E125.......... .125 inch........ FSD 34572-51 DSCK002-E125.......... .125 inch........ FSD 34572-52

.125 inch........

DSCK003 Series Keeper with 516-18 SHCS

DSC Part No. Thickness Other part numbersDSCK003-E125.......... 56ZM 2479-1 .125 inch.......

DSCK004 Series KeeperDSC Part No. Thickness Other part numbersDSCK004-E125.......... WG 1969-51

0.501.00

0.501.00

Ø0.34

0.31 0.63

0.501.00

1.25

Ø0.34TYP

0.631.25

0.31

1.00Ø0.34

1.63

1.001.25

0.31 1.00

Ø0.28TYP

Heat treated to Rockwell C 32-35

RETAINERS and KEEPERSDrawings are not to scale Slots and holes are centered unless otherwise noted

.50mm

.10mm

.20mm

.20mm

.50 mm

.50 mm

1.0 m

m3.

0 mm

2015


Page 60

DSCK005 Series Keepers (painted)DSC Part No. Thickness Other part numbersDSCK005-E125.......... WG 1969-51 REV '2'.125 inch........

6.0........8.0........10.0......12.0......14.0......

DSCB00X Series Insulating BushingsDSC Part No. ID mm OD mm Other part numbersDSCB001-M0XX........DSCB002-M0XX........DSCB003-M0XX........DSCB004-M0XX........DSCB005-M0XX........

FSD 41404-51-XXFSD 41404-52-XXFSD 41404-53-XXFSD 41404-54-XXFSD 41404-55-XX

0.10mm..........0.20mm..........0.25mm..........0.50mm..........1.00mm..........1.20mm..........1.50mm..........2.00mm..........3.00mm..........4.00mm..........

DSCF001 Series Feeler GagesDSC Part No. Thickness Other part numbersDSCF001-M010..........DSCF001-M020..........DSCF001-M025..........DSCF001-M050..........DSCF001-M100..........DSCF001-M120..........DSCF001-M150..........DSCF001-M200..........DSCF001-M300..........DSCF001-M400..........

FSD30337-010FSD30337-020FSD30337-025FSD30337-050FSD30337-100FSD30337-120FSD30337-150FSD30337-200FSD30337-300FSD30337-400

9.00mm..........

DSCF002 Series Feeler Gage SetDSC Part No. Total thickness ComponentsDSCF002-M909.......... (1) 0.10mm, (2) 0.20mm, (3) 0.50mm,

(1) 1.00mm, (2) 3.00mm

0.31 1.001.63

0.751.251.38

0.28TYP

2.74

0.50 0.24

Ø0.22

Feeler Gages can be made to your specifications, as individual blades or assembled onto aring or into a case as below. Steel blades are etched with thickness. Stock thickness areindicated above. Several thicknesses are also available in plastic. Please call to discuss yourspecific needs.

Custom feeler gage stackups andassemblies are available.

KEEPERS, TEST COUPONS, FEELER GAGESDrawings are not to scale Slots and holes are centered unless otherwise noted

9.0........11.0......13.0......15.0......17.0......

These bushings are made from phenolic tubing, where the XX designates the length inmillimeters. We are also happy to sell the uncut phenolic tubing.

Legacy Part Number.......... FSD 30337

2015

DSCD Series Weld WashersDSC Part No. I.D. O.D. Flat to Center Thickness Material/Plating Other part numbersDSCD001-E125..........DSCD002-E125..........DSCD003-E250..........DSCD004-E140..........DSCD005-E140..........DSCD006-E140..........DSCD007-E190..........DSCD008-E190..........DSCD009-E190..........DSCD010-E190..........DSCD011-E250..........DSCD018-E310..........DSCD012-E190..........DSCD013-E250..........DSCD014-E250..........DSCD015-E250..........DSCD016-E250..........DSCD017-E310..........DSCD101-M300..........DSCD102-M300..........DSCD103-M300..........DSCD104-M300..........DSCD105-M300..........DSCD106-M300..........DSCD107-M400..........DSCD108-M400..........DSCD109-M480..........DSCD110-M635..........

DSC-D-14DSC-D-51656ZF24981-3856ZM 2359-2, DSC-D-38FSD 14102FSD 14102SS56ZM 2359-3, DSC-D-12FSD 14103FSD 14103SSFSD 14103Z56ZF24981-12P111005DSC-D-5856ZF24981-5856ZF24981-34FSD 14239, DSC-D-34DSC-D-78DSC-D-100FSD 41341, DSC-D-M6DSC-D-M6PFSD 41342, DSC-D-M8DSC-D-M8PFSD 41343, DSC-D-M10DSC-D-M10PFSD 41344, DSC-D-M12DSC-D-M12PDSC-D-M16DSC-D-M20

0.25 inch.......0.31 inch.......0.38 inch.......0.38 inch.......0.38 inch.......0.38 inch.......0.50 inch.......0.50 inch.......0.50 inch.......0.50 inch.......0.50 inch.......0.50 inch.......0.63 inch.......0.63 inch.......0.75 inch.......0.75 inch.......0.88 inch.......1.00 inch.......6.4mm...........6.4mm...........8.1mm...........8.1mm...........10.1mm.........10.1mm.........12.1mm.........12.1mm.........16.7mm.........20.3mm.........

O.D.I.D.

Flatto

Center

0.75 inch........0.88 inch........1.00 inch........1.00 inch........1.00 inch........1.00 inch........1.25 inch........1.25 inch........1.25 inch........1.25 inch........1.25 inch........1.38 inch........1.38 inch........1.50 inch........1.50 inch........1.50 inch........1.75 inch........2.00 inch........19.0mm..........19.0mm..........22.4mm..........22.4mm..........25.4mm..........25.4mm..........31.8mm..........31.8mm..........38.1mm..........44.5mm..........

0.25 inch............0.31 inch............0.38 inch............0.38 inch............0.38 inch............0.38 inch............0.38 inch............0.38 inch............0.50 inch............0.50 inch............0.50 inch............0.50 inch............0.50 inch............0.50 inch............0.56 inch............0.63 inch............0.63 inch............0.69 inch............6.4mm................6.4mm................8.0mm................8.0mm................10.0mm..............10.0mm..............12.0mm..............12.0mm..............15.0mm..............19.0mm..............

0.13 inch...........0.13 inch...........0.25 inch...........0.14 inch...........0.14 inch...........0.14 inch...........0.19 inch...........0.19 inch...........0.19 inch...........0.19 inch...........0.25 inch...........0.31 inch...........0.19 inch...........0.25 inch...........0.25 inch...........0.25 inch...........0.25 inch...........0.31 inch...........3.0mm...............3.0mm...............3.0mm...............3.0mm...............3.0mm...............3.0mm...............4.0mm...............4.0mm...............4.8mm...............6.4mm...............

steel......................steel......................steel......................steel......................steel......................stainless................steel......................steel......................stainless................steel/zinc...............steel......................steel......................steel......................steel......................steel......................steel......................steel......................steel......................steel......................phenolic.................steel......................phenolic.................steel......................phenolic.................steel......................phenolic.................steel......................steel......................

.16

O.D.

I.D.

.025

90°

DSCS Series Serrated Washers (dimensions in inches)DSC Part No. I.D. O.D. Thickness Material Other part numbers

steel.........steel.........steel.........steel.........steel.........

0.62 ..............0.75 ..............0.88 ..............1.00 ..............1.25 ..............

0.16 ..................0.16 ..................0.16 ..................0.16 ..................0.16 ..................

DSCS001-E160..........DSCS002-E160..........DSCS003-E160..........DSCS004-E160..........DSCS005-E160..........

0.27 .............0.33 .............0.39 .............0.52 .............0.64 .............

FSD 14040-3FSD 14040-4FSD 14040-5FSD 14040-1FSD 14040-2

These serrated washers are heat treatedRockwell C 40-44 and black oxided.

B

A

.88

DSCY Series Links (dimensions in inches)DSC Part No. A B length Thickness Material Other part numbers

2.50 .............3.00 .............1.88 .............2.75 .............2.38 .............3.88 .............3.25 .............2.12 .............

DSCY001-E250..........DSCY002-E250..........DSCY003-E250..........DSCY004-E250..........DSCY005-E250..........DSCY006-E250..........DSCY007-E250..........DSCY008-E250..........

0.25 ..................0.25 ..................0.25 ..................0.25 ..................0.25 ..................0.25 ..................0.25 ..................0.25 ..................

3.38 ..............3.88 ..............2.75 ..............3.62 ..............3.25 ..............4.75 ..............4.12 ..............3.00 ..............

WG-8357-51WG-8357-52WG-8357-53WG-8357-54WG-8357-55WG-8357-56WG-8357-57WG-8357-58

steel.........steel.........steel.........steel.........steel.........steel.........steel.........steel.........

WELD WASHERS, SERRATED WASHERS, LINKSDrawings are not to scale Slots and holes are centered unless otherwise noted


Page 61

.501 ± .001

2015


Page 62

0.21 .............0.21 .............0.38 .............0.38 .............0.39 .............0.41 .............0.41 .............0.42 .............0.44 .............0.47 .............0.50 .............0.50 .............0.50 .............0.50 .............0.50 .............0.50 .............0.50 .............0.50 .............0.51 .............0.53 .............0.53 .............0.53 .............0.53 .............0.54 .............0.54 .............0.54 .............0.54 .............0.54 .............0.54 .............0.55 .............0.55 .............0.55 .............0.56 .............0.56 .............0.65 .............0.65 .............0.65 .............0.65 .............0.65 .............0.65 .............0.66 .............0.66 .............0.66 .............0.67 .............0.76 .............0.78 .............0.78 .............0.81 .............0.81 .............0.81 .............0.81 .............0.81 .............0.81 .............0.88 .............0.90 .............0.94 .............0.94 .............0.94 .............0.94 .............0.94 .............0.94 .............1.00 .............1.00 .............1.00 .............1.00 .............1.00 .............1.00 .............1.00 .............1.01 .............1.02 .............1.02 .............1.03 .............1.03 .............1.03 .............1.06 .............1.06 .............1.21 .............1.24 .............1.24 .............1.24 .............1.24 .............1.24 .............1.24 .............1.25 .............1.25 .............1.25 .............1.25 .............1.25 .............

DSCW Series Inch Steel WashersDSC Part No. I.D. O.D. Thickness Notes/Other part numbersDSCW001-E060.........DSCW002-E100.........DSCW003-E130.........DSCW004-E130.........DSCW005-E190.........DSCW006-E100.........DSCW007-E100.........DSCW008-E130.........DSCW009-E130.........DSCW010-E190.........DSCW011-E002.........DSCW012-E005.........DSCW013-E032.........DSCW014-E010.........DSCW015-E003.........DSCW016-E015.........DSCW017-E380.........DSCW019-E380.........DSCW020-E190.........DSCW021-E100.........DSCW022-E130.........DSCW023-E190.........DSCW024-E380.........DSCW025-E060.........DSCW026-E160.........DSCW027-E160.........DSCW028-E160.........DSCW029-E160.........DSCW030-E160.........DSCW031-E130.........DSCW032-E130.........DSCW033-E120.........DSCW034-E500.........DSCW035-E200.........DSCW036-E060.........DSCW037-E250.........DSCW038-E090.........DSCW039-E090.........DSCW040-E090.........DSCW041-E090.........DSCW042-E130.........DSCW043-E120.........DSCW044-E120.........DSCW045-E200.........DSCW046-E120.........DSCW047-E130.........DSCW048-E190.........DSCW049-E150.........DSCW050-E320.........DSCW051-E010.........DSCW052-E002.........DSCW053-E003.........DSCW054-E005.........DSCW055-E130.........DSCW056-E210.........DSCW057-E002.........DSCW058-E015.........DSCW059-E003.........DSCW060-E032.........DSCW061-E005.........DSCW062-E010.........DSCW063-E010.........DSCW064-E015.........DSCW065-E032.........DSCW066-E005.........DSCW067-E003.........DSCW068-E002.........DSCW069-E120.........DSCW070-E060.........DSCW071-E150.........DSCW072-E150.........DSCW073-E190.........DSCW074-E130.........DSCW075-E190.........DSCW076-E120.........DSCW077-E250.........DSCW078-E040.........DSCW079-E005.........DSCW080-E010.........DSCW081-E003.........DSCW082-E002.........DSCW083-E015.........DSCW084-E032.........DSCW085-E032.........DSCW086-E015.........DSCW087-E003.........DSCW088-E005.........DSCW089-E010.........

0.06 ...................0.10 ...................0.13 ...................0.13 ...................0.19 ...................0.10 ...................0.10 ...................0.13 ...................0.13 ...................0.19 ...................0.002 .................0.005 .................0.032 .................0.010 .................0.003 .................0.015 .................0.38 ...................0.38 ...................0.19 ...................0.10 ...................0.13 ...................0.19 ...................0.38 ...................0.06 ...................0.16 ...................0.16 ...................0.16 ...................0.13 ...................0.13 ...................0.12 ...................0.50 ...................0.20 ...................0.06 ...................0.13 ...................0.09 ...................0.25 ...................0.09 ...................0.09 ...................0.09 ...................0.09 ...................0.13 ...................0.12 ...................0.12 ...................0.20 ...................0.12 ...................0.13 ...................0.19 ...................0.15 ...................0.32 ...................0.01 ...................0.002 .................0.003 .................0.005 .................0.13 ...................0.21 ...................0.002 .................0.015 .................0.003 .................0.032 .................0.005 .................0.01 ...................0.01 ...................0.015 .................0.032 .................0.005 .................0.003 .................0.002 .................0.12 ...................0.06 ...................0.15 ...................0.15 ...................0.19 ...................0.13 ...................0.19 ...................0.12 ...................0.25 ...................0.04 ...................0.005 .................0.01 ...................0.003 .................0.002 .................0.015 .................0.032 .................0.032 .................0.015 .................0.003 .................0.005 .................0.01 ...................

0.50 ..............0.62 ..............1.00 ..............1.00 ..............0.75 ..............0.75 ..............0.81 ..............1.24 ..............1.75 ..............1.92 ..............0.88 ..............0.88 ..............0.88 ..............0.88 ..............0.88 ..............0.88 ..............1.25 ..............2.13 ..............1.38 ..............0.88 ..............1.00 ..............1.25 ..............1.50 ..............0.81 ..............1.18 ..............1.18 ..............1.18 ..............1.50 ..............2.00 ..............0.81 ..............1.06 ..............1.06 ..............1.75 ..............1.25 ..............1.50 ..............1.50 ..............1.62 ..............1.75 ..............2.50 ..............1.97 ..............1.25 ..............2.00 ..............2.25 ..............1.25 ..............1.50 ..............1.25 ..............1.50 ..............1.00 ..............1.00 ..............1.00 ..............1.00 ..............1.00 ..............1.00 ..............1.38 ..............1.50 ..............1.38 ..............1.38 ..............1.38 ..............1.38 ..............1.38 ..............1.25 ..............1.25 ..............1.25 ..............1.25 ..............1.25 ..............1.25 ..............1.25 ..............1.71 ..............1.75 ..............1.38 ..............1.38 ..............1.88 ..............2.00 ..............2.00 ..............1.50 ..............2.50 ..............1.75 ..............1.62 ..............1.62 ..............1.62 ..............1.62 ..............1.62 ..............1.62 ..............1.50 ..............1.50 ..............1.50 ..............1.50 ..............1.50 ..............

FSD 36577FSD 1431256ZM 2359-9STD 40-4WG1104-51FSD 14184FSD 14150FSD 14120FSD 14101-11493919WG 521-76-AWG 521-76-CWG 521-76-FWG 521-76-DWG 521-76-BWG 521-76-E56ZM 2359-7FSD 14162STD-40-9FSD 14151STD 40-2FSD 14128FSD 14083FSD 14013FSD 14010602289941-12-839-01FSD 14121FSD 14121-52FSD 14126FSD 14125FSD 14123FSD 14014FSD 14101-2FSD 14119FSD 14091FSD 32789FSD 32788CL 145-60CL 146-54STD 40-1WG1442-53WG1211-53FSD 14124CL 127-60STD 40-3STD 40-7WG 629-59-EWG 629-59-FWG 629-59-DWG 629-59-AWG 629-59-BWG 629-59-CFSD 14182CL 124-51WG 2416-53-AWG 2416-53-EWG 2416-53-BWG 2416-53-FWG 2416-53-CWG 2416-53-DWG 521-75-DWG 521-75-EWG 521-75-FWG 521-75-CWG 521-75-BWG 521-75-AFSD 14163WG753-51WT140X-56FSD 14170WG308-51CL 159-58STD 40-5WG802-51STD 40-8WG1064-52WG 2416-65-CWG 2416-65-DWG 2416-65-BWG 2416-65-AWG 2416-65-EWG 2416-65-FWG 2416-57-FWG 2416-57-EWG 2416-57-BWG 2416-57-CWG 2416-57-D

O.D.I.D.

WG 2416-57-AWT134-57WG786-51WG921-51WG1370-51STD 40-6WG840-51WG780-51WG1064-51WG 2416-61-BWG 2416-61-FWG 2416-61-CWG 2416-61-DWG 2416-61-AWG 2416-61-EWG 642-51-FWG 642-51-CWG 642-51-EWG 642-51-AWG 642-51-BWG 642-51-DWG1511-51WG 522-54-AWG 522-54-FWG 522-54-CWG 522-54-EWG 522-54-BWG 522-54-DWG787-51WG922-51WG577-51WG929-51WG 2507-54-AWG 2507-54-DWG 2507-54-CWG 2507-54-BWG 2507-54-FWG 2507-54-EWG790-51WG970-51WG980-51WG923-51WG1080-51WG2416-59-AWG2416-59-DWG2416-59-BWG2416-59-FWG2416-59-CWG2416-59-E

0.002 .................0.06 ...................0.12 ...................0.12 ...................0.12 ...................0.19 ...................0.12 ...................0.12 ...................0.04 ...................0.003 .................0.032 .................0.005 .................0.01 ...................0.002 .................0.015 .................0.032 .................0.005 .................0.015 .................0.002 .................0.003 .................0.01 ...................0.12 ...................0.002 .................0.032 .................0.005 .................0.015 .................0.003 .................0.01 ...................0.12 ...................0.12 ...................0.06 ...................0.12 ...................0.002 .................0.01 ...................0.005 .................0.003 .................0.032 .................0.015 .................0.12 ...................0.12 ...................0.12 ...................0.12 ...................0.12 ...................0.002 .................0.01 ...................0.003 .................0.032 .................0.005 .................0.015 .................

1.50 ..............1.75 ..............1.75 ..............1.75 ..............2.00 ..............2.25 ..............2.00 ..............2.25 ..............1.75 ..............1.82 ..............1.82 ..............1.82 ..............1.82 ..............1.82 ..............1.82 ..............1.94 ..............1.94 ..............1.94 ..............1.94 ..............1.94 ..............1.94 ..............2.25 ..............1.81 ..............1.81 ..............1.81 ..............1.81 ..............1.81 ..............1.81 ..............2.25 ..............2.75 ..............2.38 ..............2.75 ..............1.94 ..............1.94 ..............1.94 ..............1.94 ..............1.94 ..............1.94 ..............2.25 ..............2.50 ..............2.50 ..............2.75 ..............3.00 ..............3.94 ..............3.94 ..............3.94 ..............3.94 ..............3.94 ..............3.94 ..............

1.25 .............1.25 .............1.25 .............1.25 .............1.28 .............1.28 .............1.31 .............1.38 .............1.40 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.50 .............1.54 .............1.56 .............1.56 .............1.56 .............1.56 .............1.56 .............1.56 .............1.62 .............1.62 .............1.66 .............1.66 .............1.75 .............1.75 .............1.75 .............1.75 .............1.75 .............1.75 .............1.94 .............1.94 .............1.94 .............1.94 .............1.97 .............3.25 .............3.25 .............3.25 .............3.25 .............3.25 .............3.25 .............

DSCW090-E002.........DSCW091-E060.........DSCW092-E120.........DSCW093-E120.........DSCW094-E120.........DSCW095-E190.........DSCW096-E120.........DSCW097-E120.........DSCW098-E040.........DSCW099-E003.........DSCW100-E032.........DSCW101-E005.........DSCW102-E010.........DSCW103-E002.........DSCW104-E015.........DSCW105-E032.........DSCW106-E005.........DSCW107-E015.........DSCW108-E002.........DSCW109-E003.........DSCW110-E010.........DSCW111-E120.........DSCW112-E002.........DSCW113-E032.........DSCW114-E005.........DSCW115-E015.........DSCW116-E150.........DSCW117-E010.........DSCW118-E120.........DSCW119-E120.........DSCW120-E060.........DSCW121-E120.........DSCW122-E002.........DSCW123-E010.........DSCW124-E005.........DSCW125-E003.........DSCW126-E032.........DSCW127-E015.........DSCW128-E120.........DSCW129-E120.........DSCW130-E120.........DSCW131-E120.........DSCW132-E120.........DSCW133-E002.........DSCW134-E010.........DSCW135-E003.........DSCW136-E032.........DSCW137-E005.........DSCW138-E015.........

DSC Part No. I.D. O.D. Thickness Notes/Other part numbers

DSCW Series Metric Steel WashersDSC Part No. I.D. O.D. Thickness Notes/Other part numbersDSCW301-E060.........DSCW302-E100.........DSCW303-E130.........DSCW304-E130.........DSCW305-E190.........DSCW306-E100.........DSCW307-E100.........DSCW308-E130.........DSCW309-E130.........DSCW310-E190.........

5.6 ...............6.7 ...............9.0 ...............11.0 .............13.4 .............17.3 .............22.0 .............25.8 .............32.7 .............38.6 .............

14.8 ..............18.6 ..............24.9 ..............27.7 ..............33.7 ..............43.7 ..............49.7 ..............55.4 ..............70.4 ..............89.3 ..............

1.4 .....................1.4 .....................1.9 .....................2.4 .....................3.0 .....................3.5 .....................4.0 .....................4.5 .....................5.0 .....................5.7 .....................

F610515F610618F610825F611028F611234F611644F612050F612456F613072F613690

We will make any washer, in anyquantity and size, from anymaterial. Call us with yourrequirements!

WASHERSDrawings are not to scale Slots and holes are centered unless otherwise noted

2015


Page 63

O.D.I.D.

phenolic.....phenolic.....nylon..........phenolic.....phenolic.....phenolic.....nylon..........nylon..........phenolic.....nylon..........phenolic.....phenolic.....phenolic.....phenolic.....phenolic.....

DSCW Series Insulating WashersDSC Part No. I.D. O.D. Thickness Mat'l Other part numbers

0.06 inch.....0.13 inch.....0.13 inch.....0.13 inch.....0.09 inch.....0.13 inch.....0.09 inch.....0.13 inch.....0.09 inch.....0.12 inch.....0.06 inch.....3.0 mm........3.0 mm........3.0 mm........3.0 mm........

1.00 inch........1.00 inch........1.25 inch........1.25 inch........1.25 inch........1.25 inch........1.38 inch........1.50 inch........1.63 inch........4.75 inch........2.13 inch........20.0 mm.........24.0 mm.........29.0 mm.........35.0 mm.........

0.38 inch.......0.42 inch.......0.51 inch.......0.53 inch.......0.65 inch.......0.65 inch.......0.78 inch.......0.89 inch.......0.90 inch.......1.40 inch.......1.50 inch.......7.0 mm..........8.0 mm..........10.0 mm........13.0 mm........

DSCW501-E060.........DSCW502-E130.........DSCW503-E125.........DSCW504-E130.........DSCW505-E090.........DSCW506-E130.........DSCW507-E090.........DSCW508-E130.........DSCW509-E090.........DSCW513-E120.........DSCW514-E060.........DSCW601-M300.........DSCW602-M300.........DSCW603-M300.........DSCW604-M300.........

WG 6561-51WG 9132-5156ZF3102824BWG 9134-51WG 9237-51WG 9053-51

CL 63-61WG 9239-51WG 8412-51CL 63-62FSD 41405-51FSD 41405-52FSD 41405-53FSD 41405-54

13.2 .............17.7 .............25.0 .............22.4 .............26.4 .............33.2 .............41.2 .............43.2 .............49.2 .............55.2 .............59.2 .............71.2 .............

7.0 ...............9.0 ...............10.2 .............11.0 .............14.0 .............18.0 .............22.0 .............24.0 .............26.0 .............30.0 .............33.0 .............39.0 .............

DSCW701-E060.........DSCW702-E130.........DSCW703-E130.........DSCW704-E090.........DSCW705-E130.........DSCW706-E090.........DSCW707-E130.........DSCW708-E090.........DSCW709-E090.........DSCW710-E120.........DSCW711-E015.........DSCW712-E120.........

steel, Rc 38-45.........steel, Rc 38-45.........steel, Rc 38-45*........steel, Rc 38-45.........steel, ASTM F436M..steel, ASTM F436M..steel, ASTM F436M..steel, ASTM F436M..steel, ASTM F436M..steel, ASTM F436M..steel, ASTM F436M..steel, ASTM F436M..

F620614F620818F621025F621022F621227F621634F622042F622244F622450F622756F623060F623672

3.4 .............3.4 .............4.5 .............3.4 .............3.9 .............3.9 .............3.9 .............4.0 .............4.0 .............4.0 .............4.0 .............4.0 .............

DSCW Series Heat Treated Metric WashersDSC Part No. I.D. O.D. Thickness Mat'l/HT Other part no's

L-BLOCKS, STOP BLOCKS, PINS, PIN RETAINERS, ROUGHLOCATORS, STUB SHAFTS and other components are availablefrom Douglas Stamping Company. We provide these details toNAAMS, FORD, GM, Chrysler and other current and obsoletespecifications.

Below is a partial listing of the NAAMS part numbers available. Mostof the items are available in either Metric or English (inch) dimensions.Metric is usually designated by an 'M' suffix. English either uses an 'E'suffix or no suffix.

AAB100 - AAB401ACA001 - ACA223ADP201 - ADP502AHB001 - AHB002ALB010 - ALB281APE061 - APE250APR010 - APR071APS061 - APS250ARA450 - ARA801ARE061 - ARE190ARL075 - ARL320ARP061 - ARP250ASC020 - ASC091ASF020 - ASF091FSD, FS, CSS

*1020 HRS, carb & harden 1.0 deep 38-45 Rc

Riser Angle BracketPower Clamp ArmDump Unit Stub Shaft and SpacerRiser Angle BracketL-BlockLocating PinLocating Pin RetainerLocating PinRiser Angle BracketLocating PinRough LocatorsLocating PinCrowned Stop BlockFlat Stop BlockAll stub shafts, stop blocks, Lblocks and washers

INSULATING WASHERS, NAAMS COMPONENTS, MISCELLANEOUSDrawings are not to scale Slots and holes are centered unless otherwise noted

2015


Page 64

NAAMS RISER ANGLE BRACKETSSeriesAABARAAHB

English andMetric

NAAMS DIE LIFT PIN WITH SPRINGRETAINER RINGSeries

NAAMS ROUGH LOCATORSSeries

L01ARLARL P (with UHMW wear plate)

NAAMS STOP BLOCKSSeriesASCASF

NAAMS SCRAP CHUTE CHAIN HOOKSSeriesM03

NAAMS ASSEMBLY and STAMPING COMPONENTSDrawings are not to scale Slots and holes are centered unless otherwise noted

NAAMS and FSD DUMP UNITCOMPONENTSSeriesADP Shafts, Bearings, Spacers and KeepersFSD Shafts

NAAMS components are part of the Auto Steel Partnership standard. Forengineering details and specific part numbers, please reference the GlobalAssembly and Stamping standards:http://naamsstandards.org

2015


Page 65

NAAMS LOCATING PIN AND RETAINER COMPONENTSAND ASSEMBLIESSeriesAPR Pin RetainersAPS Locating PinsAPE Locating PinsARP Respot PinsARE Respot PinsAPQ Locating PinsAPS Retractable Locating PinsAPE Retractable Locating PinsARP Retr. Respot PinsARE Retr. Respot PinsAPQ Retr. Locating Pins

Full line of L-blocks, T-blocks, fasteners,washers, shims and spacers

NAAMS, FS and FSD L and T BLOCKSSeries

NAAMS NC BLOCK BLANKSSeries

ALBFS 15FSD

ANIANLANR

NAAMS PUNCHES/DIE BUTTONS &COMPONENTSSeriesP SeriesBall Lock RetainersBacking and Retaining PlatesPunch StrippersBall Lock PunchesDie ButtonsBall Lock Ejector Punches

NAAMS TOOLING BALLSSeriesM01

NAAMS ASSEMBLY and STAMPING COMPONENTSDrawings are not to scale Slots and holes are centered unless otherwise noted

NAAMS CAM DWELL WEAR PLATESSeriesW111W211W311

NAAMS TRUNION BLOCKSSeriesACT

IndexPart Number DSC Ref, Page Part Number DSC Ref, Page Part Number DSC Ref, Page11-38D 336 065 DSCH113 33 AAB Riser 64 CSS 48 DSCH088 2711-38D 336 066 DSCH114 33 ACA001 thru 223 63 CSS 510 DSCH095 2911-38D 495 551 DSCH115 34 ACH600 thru 620 DSCH044 15 CSS 512 DSCH096 29125187 DSCH023 10 ACS330S thru 370S DSCP034 45 CSS 66 DSCH089 271493919 DSCW010 62 ACS630 thru 670 DSCP035 46 CSS 812 DSCH097 293 193 188 thru 191 DSCH123 36 ACS630S thru 670S DSCP087 56 CSS 88 DSCH090 273 193 192 thru 195 DSCH124 36 ACT Trunion 65 CSS 89 DSCH091 283 193 196 thru 199 DSCH125 36 ADP Stub Shaft 64 CSS 99 DSCH092 283 699 4XX DSCH116 34 AHB Riser 64 D101044 thru 049 DSCP086 5641-12-839-01 DSCW028 62 ALB L-Block 65 D113022 thru 115 DSCP084 5541-502-1901 thru 1916 DSCP028 44 ANI NC Block 65 D113063 DSCH107 3241-502-1921 thru 1936 DSCP029 44 ANL NC Block 65 D113064 DSCH108 3241-502-1941 thru 1956 DSCP030 44 ANR NC Block 65 D113065 DSCH0109 3241-502-1960 thru 1976 DSCP031 45 APE Locating Pin 65 D113066 DSCH110 3241-502-2200 thru 2220 DSCP050 50 APQ Ret. Loc. Pin 65 D113069 DSCP088 5641-502-2221 thru 2241 DSCP051 50 APR Pin Retainer 65 D113070 DSCP089 5641-502-2242 thru 2262 DSCP052 51 APS Ret. Loc. Pin 65 D113071 DSCP090 5742-530-2500 DSCH083 26 ARA Riser 64 D113072 DSCP091 5742-530-2525 DSCH084 26 ARE Respot Pin 65 D233007 thru 027 DSCP085 5542-530-2575 DSCH085 26 ARL Padded Loc. 64 Die Buttons 6542-530-2575 DSCH089 27 ARL Rough Locator 64 DSC-625S DSCH023 1042-530-2600 DSCH086 26 ARP Ret. Respot Pin 65 DSC-D-100 DSCD017 6142-530-2625 DSCH087 27 ASC Curved Stop Block 64 DSC-D-12 DSCD007 6142-530-2650 DSCH088 27 ASF Flat Stop Block 64 DSC-D-14 DSCD001 6142-530-2700 DSCH090 27 ASH100 thru 120 DSCH036 13 DSC-D-34 DSCD015 6142-530-2725 DSCH091 28 ASH100N thru 120N DSCH049 17 DSC-D-38 DSCD004 6142-530-2750 DSCH092 28 ASH200 thru 220 DSCH037 14 DSC-D-516 DSCD002 6142-530-2775 DSCH093 28 ASH300 thru 320 DSCH038 14 DSC-D-58 DSCD013 6142-530-2800 DSCH094 28 ASH300N thru 320N DSCH050 17 DSC-D-78 DSCD016 6142-530-2825 DSCH095 29 ASH300S thru 320S DSCH046 16 DSC-D-M10 DSCD0105 6142-530-2850 DSCH096 29 ASH400 thru 420 DSCH039 14 DSC-D-M10P DSCD106 6142-530-2900 DSCH097 29 ASH400N thru 420N DSCH051 17 DSC-D-M12 DSCD107 6142-530-2925 DSCH098 29 ASH400S thru 420S DSCH047 16 DSC-D-M12P DSCD108 6142-530-2950 DSCH099 30 ASH500 thru 520 DSCH040 14 DSC-D-M16 DSCD109 6142-530-2975 DSCH0100 30 ASH600 thru 620 DSCH045 16 DSC-D-M20 DSCD110 6142-530-3000 DSCH101 30 ASP230 thru 270 DSCP092 57 DSC-D-M6 DSCD101 6142-530-3025 DSCH102 30 ASP302 thru 370 DSCP050 50 DSC-D-M6P DSCD102 6142-530-3050 DSCH103 31 ASP330N thru 370N DSCP036 46 DSC-D-M8 DSCD103 6142-530-3075 DSCH104 31 ASP330S thru 370S DSCP015 41 DSC-D-M8P DSCD104 6142-530-4000 DSCH105 31 ASP402 thru 470 DSCP051 50 DSC1918 DSCH119 3542-530-4025 DSCH106 31 ASP430N thru 470N DSCP037 46 DSC1938 DSCH120 355 279 665 thru 668 DSCH115 34 ASP430S thru 470S DSCP016 41 DSC1948 DSCH121 3556ZF 28682 DSCH038 14 ASP502 thru 570 DSCP052 50 DSC1963 DSCH122 3556ZF 28683 DSCH041 15 ASP602 thru 670 DSCP053 51 DSC302L thru 320L DSCH082 2556ZF 28684 DSCH039 14 ASP630N thru 670N DSCP038 47 DSC302S thru 320S DSCH046 1656ZF 28685 DSCH042 15 ASP630S thru 670S DSCP017 41 DSC402S thru 420S DSCH049 1756ZF 28686 DSCH043 15 ASP730 through 770 DSCP093 57 DSC50081 DSCH053 1856ZF23102824B DSCW503 63 Cam Dwell Wear Plates 65 DSC50082 DSCH054 1856ZF24981-12 DSCD011 61 Chain Hooks 64 DSC50083 DSCH055 1856ZF24981-34 DSCD014 61 CL 124-51 DSCW056 62 DSC50084 DSCH056 1856ZF24981-38 DSCD003 61 CL 127-60 DSCW046 62 DSC502 thru 570 DSCP052 5056ZF24981-58 DSCD013 61 CL 145-60 DSCW040 62 DSC602S thru 620S DSCH052 1756ZF27461 DSCP047 49 CL 146-54 DSCW041 62 DSCB00X-M0XX DSCB00X 6056ZF27462 DSCP046 49 CL 159-58 DSCW074 62 DSCD001 6156ZF27463 DSCP048 49 CL 63-61 DSCW508 63 DSCD002 6156ZF27464 DSCP045 48 CL 63-62 DSCW514 63 DSCD003 6156ZF27465 DSCP049 49 CLP-3691-66 DSCW511 63 DSCD004 6156ZF28047 DSCP039 47 CSS 1010 DSCH098 29 DSCD005 6156ZF28047-101 thru 121 DSCP050 50 CSS 1012 DSCH099 30 DSCD006 6156ZF28048 DSCP040 47 CSS 1212 DSCH100 30 DSCD007 6156ZF28048-101 thru 121 DSCP051 50 CSS 1214 DSCH101 30 DSCD008 6156ZF28049 DSCP041 47 CSS 1218 DSCH102 30 DSCD009 6156ZF28050 DSCP042 48 CSS 1417 DSCH103 31 DSCD010 6156ZF28066 DSCP053 51 CSS 1616 DSCH014 31 DSCD011 6156ZF28466 DSCP043 48 CSS 1816 DSCH105 31 DSCD012 6156ZF28467 DSCP044 48 CSS 1822 DSCH106 31 DSCD013 6156ZM 2359-2 DSCD004 61 CSS 33 DSCH083 26 DSCD014 6156ZM 2359-3 DSCD007 61 CSS 35 DSCH084 26 DSCD015 6156ZM 2359-6 DSCR009 59 CSS 37 DSCH085 26 DSCD016 6156ZM 2359-7 DSCW017 62 CSS 410 DSCH093 28 DSCD017 6156ZM 2359-9 DSCW003 CSS 412 DSCH094 28 DSCF001 6056ZM 2479-1 DSCR008 59 CSS 44 DSCH086 26 DSCF002 606022899 DSCW027 62 CSS 46 DSCH087 27


Page 66

IndexPart Number DSC Ref, Page Part Number DSC Ref, Page Part Number DSC Ref, PageDSCH001 5 DSCH076 24 DSCP018 41DSCH002 5 DSCH077 24 DSCP019 42DSCH003 5 DSCH078 24 DSCP020 42DSCH004 5 DSCH079 25 DSCP021 42DSCH005 6 DSCH080 25 DSCP022 42DSCH006 6 DSCH081 25 DSCP023 43DSCH007 6 DSCH082 25 DSCP024 43DSCH008 6 DSCH083 26 DSCP025 43DSCH009 7 DSCH084 26 DSCP026 43DSCH010 7 DSCH085 26 DSCP027 44DSCH011 7 DSCH086 26 DSCP028 44DSCH012 7 DSCH087 27 DSCP029 44DSCH013 8 DSCH088 27 DSCP030 44DSCH014 8 DSCH089 27 DSCP031 45DSCH015 8 DSCH090 27 DSCP032 45DSCH016 8 DSCH091 28 DSCP033 45DSCH017 9 DSCH092 28 DSCP034 45DSCH018 9 DSCH093 28 DSCP035 46DSCH019 9 DSCH094 28 DSCP036 46DSCH020 9 DSCH095 29 DSCP037 46DSCH021 10 DSCH096 29 DSCP038 47DSCH022 10 DSCH097 29 DSCP039 47DSCH023 10 DSCH098 29 DSCP040 47DSCH024 10 DSCH099 30 DSCP041 47DSCH025 11 DSCH100 30 DSCP042 48DSCH026 11 DSCH101 30 DSCP043 48DSCH027 11 DSCH102 30 DSCP044 48DSCH028 11 DSCH103 31 DSCP045 48DSCH029 12 DSCH104 31 DSCP046 49DSCH030 12 DSCH105 31 DSCP047 49DSCH031 12 DSCH106 31 DSCP048 49DSCH032 12 DSCH107 32 DSCP049 49DSCH033 13 DSCH108 32 DSCP050 50DSCH034 13 DSCH109 32 DSCP051 50DSCH035 13 DSCH110 32 DSCP052 50DSCH036 13 DSCH111 33 DSCP053 50DSCH037 14 DSCH112 33 DSCP054 51DSCH038 14 DSCH113 33 DSCP055 51DSCH039 14 DSCH114 33 DSCP056 51DSCH040 14 DSCH115 34 DSCP057 51DSCH041 15 DSCH116 34 DSCP058 52DSCH042 15 DSCH117 34 DSCP059 52DSCH043 15 DSCH118 34 DSCP060 52DSCH044 15 DSCH119 35 DSCP061 52DSCH045 16 DSCH120 35 DSCP062 52DSCH046 16 DSCH121 35 DSCP063 52DSCH047 16 DSCH122 35 DSCP064 52DSCH048 16 DSCH123 36 DSCP065 52DSCH049 17 DSCH123 36 DSCP066 53DSCH050 17 DSCH124 36 DSCP067 53DSCH051 17 DSCH124 36 DSCP068 53DSCH052 17 DSCH125 36 DSCP069 53DSCH053 18 DSCH125 36 DSCP070 53DSCH054 18 DSCK001 59 DSCP071 53DSCH055 18 DSCK002 59 DSCP072 53DSCH056 18 DSCK003 59 DSCP073 53DSCH057 19 DSCK004 59 DSCP074 54DSCH058 19 DSCK005 60 DSCP075 54DSCH059 19 DSCP001 37 DSCP076 54DSCH060 19 DSCP002 37 DSCP077 54DSCH061 20 DSCP003 38 DSCP078 54DSCH062 20 DSCP004 38 DSCP079 54DSCH063 21 DSCP005 38 DSCP080 54DSCH064 21 DSCP006 38 DSCP081 54DSCH065 21 DSCP007 39 DSCP082 55DSCH066 21 DSCP008 39 DSCP083 55DSCH067 22 DSCP009 39 DSCP084 55DSCH068 22 DSCP010 39 DSCP085 55DSCH069 22 DSCP011 40 DSCP086 56DSCH070 22 DSCP012 40 DSCP087 56DSCH071 23 DSCP013 40 DSCP088 56DSCH072 23 DSCP014 40 DSCP089 56DSCH073 23 DSCP015 41 DSCP090 57DSCH074 23 DSCP016 41 DSCP091 57DSCH075 24 DSCP017 41 DSCP092 57


Page 67

IndexPart Number DSC Ref, Page Part Number DSC Ref, Page Part Number DSC Ref, PageDSCP093 57 FSD 14051 DSCH008 6 FSD 32788 DSCW039 62DSCR001 58 FSD 14052 DSCH012 7 FSD 32789 DSCW038 62DSCR002 58 FSD 14053 DSCH013 8 FSD 3399 DSCR004 59DSCR003 58 FSD 14056 DSCH009 7 FSD 34492 DSCH001 5DSCR004 DSCR004 59 FSD 14058 DSCH010 7 FSD 34493 DSCH002 5DSCR005 DSCR005 59 FSD 14059 DSCH011 7 FSD 34494 DSCH003 5DSCR006 DSCR006 59 FSD 14066 DSCH006 6 FSD 34495 DSCH004 5DSCR007 DSCR007 59 FSD 14067 DSCH007 6 FSD 34496 DSCH005 6DSCR008 DSCR008 59 FSD 14068 DSCH014 8 FSD 34497 DSCH006 6DSCR009 DSCR009 59 FSD 14075 DSCH019 9 FSD 34498 DSCH007 6DSCS001 DSCS001 61 FSD 14076 DSCH020 9 FSD 34499 DSCH008 6DSCS002 DSCS002 61 FSD 14083 DSCW024 62 FSD 34500 DSCH009 7DSCS003 DSCS003 61 FSD 14091 DSCW037 62 FSD 34501 DSCH010 7DSCS004 DSCS004 61 FSD 14101-1 DSCW009 62 FSD 34502 DSCH011 7DSCS005 DSCS005 61 FSD 14101-2 DSCW035 62 FSD 34503 DSCH012 7DSCW001 thru 310 62 FSD 14102 DSCD005 61 FSD 34504 DSCH013 8DSCW501 thru 521 63 FSD 14102SS DSCD006 61 FSD 34505 DSCH014 8DSCW601 thru 604 63 FSD 14103 DSCD008 61 FSD 34506 DSCH015 8DSCW701 thru 712 63 FSD 14103SS DSCD009 61 FSD 34507 DSCH016 8DSCY001 DSCY001 61 FSD 14103Z DSCD010 61 FSD 34508 DSCH017 9DSCY002 DSCY002 61 FSD 14104-2 DSCS005 61 FSD 34509 DSCH018 9DSCY003 DSCY003 61 FSD 14104-3 DSCS001 61 FSD 34510 DSCH019 9DSCY004 DSCY004 61 FSD 14104-4 DSCS002 61 FSD 34511 DSCH020 9DSCY005 DSCY005 61 FSD 14104-5 DSCS003 61 FSD 34572-51 DSCK001 59DSCY006 DSCY006 61 FSD 141040-1 DSCS004 61 FSD 36577 DSCW001 62DSCY007 DSCY007 61 FSD 14107 DSCH005 6 FSD 3850 DSCR005 59DSCY008 DSCY008 61 FSD 14108 DSCH017 9 FSD 3851 DSCR006 59F610515 DSCW301 62 FSD 14109 DSCH018 9 FSD 39279 DSCP001 37F610618 DSCW302 62 FSD 14119 DSCW036 62 FSD 39280 DSCP002 37F610825 DSCW303 62 FSD 14120 DSCW008 62 FSD 39281 DSCP003 38F611028 DSCW304 62 FSD 14121 DSCW029 62 FSD 39558 DSCH021 10F611234 DSCW305 62 FSD 14121-52 DSCW030 62 FSD 39559 DSCH022 10F611644 DSCW306 62 FSD 14123 DSCW033 62 FSD 39600 DSCH021 10F612050 DSCW307 62 FSD 14124 DSCW045 62 FSD 39601 DSCH022 10F612456 DSCW308 62 FSD 14125 DSCW032 62 FSD 3999 DSCR007 59F613072 DSCW309 62 FSD 14126 DSCW031 62 FSD 40221 DSCP004 38F613690 DSCW310 62 FSD 14128 DSCW023 62 FSD 40222 DSCP005 38F620614 DSCW701 63 FSD 14129 DSCH003 5 FSD 40223 DSCP006 38F620818 DSCW702 63 FSD 14131 DSCP058 52 FSD 40224 DSCP007 39F621022 DSCW704 63 FSD 14136 DSCP059 52 FSD 40225 DSCP008 39F621025 DSCW703 63 FSD 14137 DSCP060 52 FSD 40226 DSCP009 39F621227 DSCW705 63 FSD 14138 DSCP061 52 FSD 40227 DSCP010 39F621634 DSCW706 63 FSD 14139 DSCP062 52 FSD 40228 DSCP011 40F622042 DSCW707 63 FSD 14140 DSCP063 52 FSD 40229 DSCP012 40F622244 DSCW708 63 FSD 14141 DSCP064 52 FSD 40230 DSCP013 40F622450 DSCW709 63 FSD 14142 DSCP065 52 FSD 40231 DSCP014 40F622756 DSCW710 63 FSD 14143-51 DSCP066 53 FSD 40774 DSCP018 41F623060 DSCW711 63 FSD 14144 DSCP067 53 FSD 40775 DSCP019 42F623672 DSCW712 63 FSD 14145 DSCP068 53 FSD 40776 DSCP020 42FS 15 L BLOCKS 65 FSD 14146 DSCP069 53 FSD 40800 DSCH024 10FS 15-A DSCH063 21 FSD 14147 DSCP070 53 FSD 40801 DSCH025 11FS 15-B DSCH064 21 FSD 14148 DSCP071 53 FSD 40827 DSCH026 11FS 15-C DSCH065 21 FSD 14150 DSCW007 62 FSD 40828 DSCH027 11FS 15-D DSCH066 21 FSD 14151 DSCW021 62 FSD 40829 DSCH028 11FS 15-E DSCH067 22 FSD 14162 DSCW019 62 FSD 40873 DSCP021 42FS 15-F DSCH068 22 FSD 14163 DSCW069 62 FSD 40874 DSCP022 42FS 15-G DSCH069 22 FSD 14170 DSCW072 62 FSD 40875 DSCP023 43FS 15-H DSCH070 22 FSD 14174 DSCP072 53 FSD 40876 DSCP024 43FS 15-J DSCH071 23 FSD 14175 DSCP073 53 FSD 40877 DSCP025 43FS 15-K DSCH072 23 FSD 14180 DSCH001 5 FSD 40878 DSCP076 54FS 15-L DSCH073 23 FSD 14181 DSCH002 5 FSD 40879 DSCP078 54FS 15-M DSCH074 23 FSD 14182 DSCW055 62 FSD 40880 DSCP080 54FS 15-N DSCH075 24 FSD 14184 DSCW006 62 FSD 40881 DSCP082 55FS 15-P DSCH076 24 FSD 14190 DSCH016 8 FSD 40891 DSCH029 12FS 15-R DSCH077 24 FSD 14195 DSCH111 33 FSD 40892 DSCH030 12FS 15-T DSCH078 24 FSD 14202 DSCH015 8 FSD 40893 DSCH031 12FS 15-U DSCH079 25 FSD 14219 DSCP074 54 FSD 40894 DSCH032 12FS 15-V DSCH080 25 FSD 14230 DSCP075 54 FSD 40895 DSCH033 13FS 15-W DSCH081 25 FSD 14235 DSCP056 51 FSD 40917 DSCP077 54FS 21-09-01XX DSCP032 45 FSD 14236 DSCP055 51 FSD 40918 DSCP079 54FS 21-09-03XX DSCP033 45 FSD 14237 DSCP054 51 FSD 40919 DSCP081 54FSD 14010 DSCW026 62 FSD 14239 DSCD0115 61 FSD 40920 DSCP083 55FSD 14013 DSCW025 62 FSD 14240 DSCP057 51 FSD 41194 DSCP026 43FSD 14014 DSCW034 62 FSD 14312 DSCW002 62 FSD 41238 DSCP027 44FSD 14050 DSCH004 5 FSD 30337 DSCF001 60 FSD 41256 DSCH034 13


Page 68

IndexPart Number DSC Ref, Page Part Number DSC Ref, Page Part Number DSC Ref, PageFSD 41257 DSCH035 13 Shims 5 WG 521-76-D DSCW014 62FSD 41258 DSCH037 14 SP1-30 thru 70 DSCP050 50 WG 521-76-E DSCW016 62FSD 41259 DSCH038 14 SP2-30 thru 70 DSCP051 50 WG 521-76-F DSCW013 62FSD 41260 DSCH039 14 SP3-30 thru 70 DSCP052 51 WG 522-54-A DSCW112 62FSD 41294 DSCP050 50 Spacers 37 WG 522-54-B DSCW116 62FSD 41295 DSCP051 50 STD 40-1 DSCW042 62 WG 522-54-C DSCW114 62FSD 41296 DSCP053 51 STD 40-2 DSCW022 62 WG 522-54-D DSCW117 62FSD 41341 DSCD101 61 STD 40-3 DSCW047 62 WG 522-54-E DSCW115 62FSD 41342 DSCD103 61 STD 40-4 DSCW004 62 WG 522-54-F DSCW113 62FSD 41343 DSCD105 61 STD 40-5 DSCW075 62 WG 629-59-A DSCW052 62FSD 41344 DSCD107 61 STD 40-6 DSCW095 62 WG 629-59-B DSCW053 62FSD 41404-51-XX DSCB001 60 STD 40-7 DSCW048 62 WG 629-59-C DSCW054 62FSD 41404-52-XX DSCB002 60 STD 40-8 DSCW077 62 WG 629-59-D DSCW051 62FSD 41404-53-XX DSCB003 60 STD-40-9 DSCW020 62 WG 629-59-E DSCW049 62FSD 41404-54-XX DSCB004 60 Stop Blocks 64 WG 629-59-F DSCW050 62FSD 41404-55-XX DSCB005 60 Stub Shafts 64 WG 642-51-A DSCW108 62FSD 41405-51 DSCW601 63 Tooling Balls 65 WG 642-51-B DSCW109 62FSD 41405-52 DSCW602 63 Trunnion Blocks. 65 WG 642-51-C DSCW106 62FSD 41405-53 DSCW603 63 TYPE 1 DSCH119 35 WG 642-51-D DSCW110 62FSD 41405-54 DSCW604 63 TYPE 2 DSCH120 35 WG 642-51-E DSCW107 62FSD 5590 DSCH112 33 TYPE 3 DSCH121 35 WG 642-51-F DSCW105 62FSD L BLOCKS 65 TYPE 4 DSCH122 35 WG 6561-51 DSCW501 63FSD SHAFTS 64 W111 65 WG 9053-51 DSCW506 63GSD-A DSCH057 19 W211 65 WG 9132-51 DSCW502 63GSD-B DSCH002 5 W311 65 WG 9134-51 DSCW504 63GSD-C DSCH058 19 Washers 62 WG 9237-51 DSCW505 63GSD-D DSCH070 22 Weld Washers 61 WG 9239-51 DSCW509 63GSD-E DSCH059 19 WG 1104-51 DSCW005 62 WG1064-51 DSCW098 62GSD-F DSCH060 19 WG 1969-51 DSCK004 59 WG1064-52 DSCW078 62GSD-G DSCH061 20 WG 1969-51 REV 2 DSCK005 60 WG1080-51 DSCW132 62GSD-H DSCH062 20 WG 2416-53-A DSCW057 62 WG1211-53 DSCW044 62GSD-J DSCH080 25 WG 2416-53-B DSCW059 62 WG1370-51 DSCW094 62GSD-K DSCH081 25 WG 2416-53-C DSCW061 62 WG1442-53 DSCW043 62L Blocks 65 WG 2416-53-D DSCW062 62 WG1511-51 DSCW111 62L01 64 WG 2416-53-E DSCW058 62 WG308-51 DSCW073 62Lift Pins 64 WG 2416-53-F DSCW060 62 WG577-51 DSCW120 62Links 61 WG 2416-57-A DSCW090 62 WG753-51 DSCW070 62Locating Pins 65 WG 2416-57-B DSCW087 62 WG780-51 DSCW097 62M FS 15-A DSCH063 21 WG 2416-57-C DSCW088 62 WG786-51 DSCW092 62M FS 15-B DSCH064 21 WG 2416-57-D DSCW089 62 WG787-51 DSCW118 62M FS 15-C DSCH065 21 WG 2416-57-E DSCW086 62 WG790-51 DSCW128 62M FS 15-D DSCH066 21 WG 2416-57-F DSCW085 62 WG802-51 DSCW076 62M FS 15-E DSCH067 22 WG 2416-59-A DSCW133 62 WG8357-51 DSCY001 61M FS 15-F DSCH068 22 WG 2416-59-B DSCW135 62 WG8357-52 DSCY002 61M FS 15-G DSCH069 22 WG 2416-59-C DSCW137 62 WG8357-53 DSCY003 61M FS 15-H DSCH070 22 WG 2416-59-D DSCW134 62 WG8357-54 DSCY004 61M FS 15-J DSCH071 23 WG 2416-59-E DSCW138 62 WG8357-55 DSCY005 61M FS 15-K DSCH072 23 WG 2416-59-F DSCW136 62 WG8357-56 DSCY006 61M FS 15-L DSCH073 23 WG 2416-61-A DSCW103 62 WG8357-57 DSCY007 61M FS 15-M DSCH074 23 WG 2416-61-B DSCW099 62 WG8357-58 DSCY008 61M FS 15-N DSCH075 24 WG 2416-61-C DSCW101 62 WG840-51 DSCW096 62M FS 15-P DSCH076 24 WG 2416-61-D DSCW102 62 WG921-51 DSCW093 62M FS 15-R DSCH077 24 WG 2416-61-E DSCW104 62 WG922-51 DSCW119 62M FS 15-T DSCH078 24 WG 2416-61-F DSCW100 62 WG923-51 DSCW131 62M FS 15-U DSCH079 25 WG 2416-65-A DSCW082 62 WG929-51 DSCW121 62M FS 15-V DSCH080 25 WG 2416-65-B DSCW081 62 WG970-51 DSCW129 62M FS 15-W DSCH081 25 WG 2416-65-C DSCW079 62 WG980-51 DSCW130 62M01 Tooling Ball 65 WG 2416-65-D DSCW080 62 WT134-57 DSCW091 62M03 Chain Hook 64 WG 2416-65-E DSCW083 62 WT140X-56 DSCW071 62M1077 DSCR001 58 WG 2416-65-F DSCW041 62M1080 DSCR002 58 WG 2507-54-A DSCW122 62M1309 DSCR003 58 WG 2507-54-B DSCW125 62NC Blocks Blanks 65 WG 2507-54-C DSCW124 62P111005 DSCD018 61 WG 2507-54-D DSCW123 62Pin Retainers 65 WG 2507-54-E DSCW127 62Punches 65 WG 2507-54-F DSCW126 62

65 WG 521-75-A DSCW068 62Retractable Pins 65 WG 521-75-B DSCW067 62Risers 64 WG 521-75-C DSCW066 62Rough Locators 64 WG 521-75-D DSCW063 62SAS 32740 DSCP028 44 WG 521-75-E DSCW064 62SAS 33840 DSCP030 44 WG 521-75-F DSCW065 62SAS 42751 DSCP029 44 WG 521-76-A DSCW011 62SAS 65163 DSCP031 45 WG 521-76-B DSCW015 62Serrated Washers 61 WG 521-76-C DSCW012 62


Page 69

Respot Pins

Date post:	03-Apr-2022
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Douglas Stamping Company 2016 Catalog - Fludisa

Documents