Date post: | 27-Oct-2014 |
Category: |
Documents |
Upload: | naina-verma |
View: | 362 times |
Download: | 5 times |
COMPREHENSIVE PROJECT REPORT
ON
“AGARBATTI INDUSTRY”
Submitted for evaluation
At
The Faculty of Management StudiesMody Institute of Technology & Science,
Laxmangarh (Sikar)(Deemed university u/s 3 of the UGC Act, 1956)
SUBMITTED BY:
NEHA VERMA
Enrollment No.:- 080050
MBA- Semester IV
AUTHENTICATION CERTIFICATE
“To Whom It May Concern”
This is to certify that the comprehensive project report on “AGARBATTI INDUSTRY” is a bonafide work carried out by me.
The matter embodied in the comprehensive project report has not been submitted earlier for award of any degree or diploma to the best of my knowledge and belief.
Signature of the Promoter
Name of the Promoter
Date
FACULTY GUIDE’S CERTIFICATE
“To Whom It May Concern”
This is to certify that the Comprehensive project report on “AGARBATTI INDUSTRY” submitted by Neha Verma is a bonafide work carried out by her, under my guidance.
The matter embodies in this comprehensive project report has not been submitted earlier for award of any degree or diploma to the best of my knowledge and belief.
Signature of the Promoter Signature of the guide
Name of the Promoter Name of Faculty Guide
Date
ACKNOWLEDGEMENT
I would like to express my deepest gratitude to all the people, who have helped me in the successful completion of the detailed project report.
I pay my heartiest thanks to Mr. Vishal Vyas, faculty FMS for his focused guidance and strong support, without which I would not have been able to accomplish the project successfully.
It is indeed my pleasure and privilege to thank all the manufacturers, dealers and the retailers for helping me in revealing me the facts and figures about the Agarbatti Industry. I also extend my thanks to them for helping me in doing the market survey and filling in the true details in the questionnaires.
I am thankful to my Dean, Mr. Saroj Dutta and also owe sincere gratitude towards him for giving me a chance to exploit my ability under his able guidance.
Last but not the least; I extend my special thanks to all mighty and my parents for this great success.
EXECUTIVE SUMMARY
It has been a good learning experience to do the detailed project reports on
setting up of the Agarbatti industry in the RIICO industrial area, Jaipur as a
part of my MBA program. The study has been made an attempt to gain
better understanding about how actually the manufacturing plant is set up.
Under this, at first I generated the product idea of Agarbatti Industry. The
main objective of the project is to the study the feasibility analysis of the
Agarbatti Industry.
Then the market analysis was done through the survey in form of
questionnaires and interviews of the, wholesalers and retailers. After this the
demand analysis was done by using the statistical techniques. With this the
demand estimation, the technical analysis was done.
After completing the technical analysis, the financial analysis was done to
check the financial feasibility of the project.
On the whole it was a wonderful experience & a great learning opportunity.
The complete project added to my theoretical knowledge.
TABLE OF CONTENTS
1.) Promoter’s Idea
2.) Firm And Promoters3.) Industry Scenario4.) Introduction5.) PORTER’S Five Force 6.) SWOT Analysis of AGARBATTI INDUSTRY
7.) Market Analysisa. Geographical Areab. Objective of the surveyc. Methodology Adoptedd. Interpretations of questionnaire for wholesalerse. Interpretations of questionnaire for retailers
8.) Demand Analysisa. Demand Estimationb. Supply Estimationc. Demand-Supply Gap Estimationd. Marketing channele. Marketing Strategies
9.) Technical Analysisa. Manufacturing Processb. Process Flow Diagramc. Selection of locationd. Plant and Machinery Requirede. Raw Material Requiredf. Manpower Requirement
10.) Financial Analysisa. Cost of the project & Means of Financeb. Basic Assumptions underlying Financial Projections
11.) Bibliography
PROMOTER’S IDEA
The idea of Agarbatti Manufacturing is my own and reasons for choosing this are as follows
1. The growth rate of this industry is high i.e. 10%.
2. Consumption of Agarbatti is more.
3. New entrants can easily establish themselves in the market
because the % of unorganised sector is high.
Thus, taking all of the above factors into account the idea of Agarbatti
Manufacturing industry was generated.
FIRM AND PROMOTERS
Firm:- The firm will be a proprietorship firm and will function from Jaipur under the concerned person’s name.
Location:-RIICO Jaipur.
Promoter:-Decision for entrepreneurship is always promoted by 5 major reasons. They are:-
Personal Characteristics
Personal Environment
Personal Goals
Business Environment Idea
Decision to Behave Entrepreneurially
Moreover, it is a Idea/Innovation that leads towards Entrepreneurship i.e.; idea comes first and entrepreneurship follows afterwards.
INDUSTRY SCENARIO
Industrial development in India has occurred mostly to meet increasing urban
consumer needs and to support the growth of the vital agricultural sector. The
traditional home based enterprises have also been simultaneously experiencing
steady growth, primarily because of the influence of market forces and also because
of multiplier effects. Cottage industries have slowly changed to rural cottage or
semi-urban micro-enterprises with limited assistance from government. Agarbatti
making is one such industry. It has responded well to increased demand for its
products both in rural and urban areas, mainly because of the continued availability
of cheap labour force dominated by women and children. At the same time, greater
advertising costs and quality improvement have pushed up the prices.
INTRODUCTION
Agarbatti (incense sticks) form part and parcel of the traditional Hindu practice of
offering prayers in temples and other places of worship. In modern days, perfumed
sticks are also used in houses and in other public places as air-fresheners and/or
mosquito repellents. The demand for agarbatti is increasing both in the domestic and
export markets because of the improvement in quality and increase in the types of
products. India is the largest producer of agarbatti in the world.
HistoryThe origin of agarbatti-making as a cottage industry can be traced to Thanjavur
region of TamilNadu from where it spread to the neighbouring state of Karnataka,
which currently is the largest producer in India, and to a lesser extent to Andhra
Pradesh, Gujarat and Bihar. Besides providing employment to unskilled women and
children, in recent years, agarbatti has increasingly become a significant foreign
exchange earner for the country. Under the liberal economic policies of the
Government, the agarbatti industry has potential to expand its global market.
INDIAN SCENARIO
Agarbatti industry is gradually developing a wider base. Of the total domestic sales
of Rs 7.1 billion (approx. US$ 198 million) in 1989/90, South India accounted for
35%, West 30%, North 18% and East 17%. Almost two-thirds of consumption took
place in rural areas (61.23%). The poor (low-income group) purchases about 46% of
the value of the agarbatti compared with the higher income customers who buy 54%.
However, categorizing purchases into five income classes shows an inverse
relationship between income and the purchase of agarbatti. The factors influencing
purchasing decisions are: the quality, brand name preference and cost.
Rising demand for the products and earning of hard currency has led the agarbatti
industry to orient itself increasingly towards exports. Total exports have increased
by 266%, from Rs 1.5 billion (approx. US$ 42 million) in 1989-90 to Rs 4 billion
(approx. US$ ll2 million) in 1993-94. More than 800 registered and 3000
unregistered units currently exist in the country and only up to 10% of these, mostly
in Karnataka, are engaged in export trade.
CHARACTERISTICS
The agarbatti industry in India operates in the informal sector. The enterprises are
located both in rural and urban areas. The labour force engaged is largely
unorganized, although some workers, especially those working for large
establishments and particularly in Bangalore, receive some of the social security
benefits enjoyed by their counterparts in organized private undertakings.
Manufacturing is done on a piece-meal basis, with individual families being
contracted to assemble agarbatti sticks being the most common mode.
RAW MATERIALS AND SOURCES
The major raw materials used in the agarbatti industry are:
Bamboo sticks
wood charcoal
processed perfumes
jigat powder (an adhesive-like substance made from powdered bark
of the Maclilus makarantha tree)
These are collected through contract labour system, which is widespread in the
unorganized sector and leads to wide differences in wages because of the differences
in minimum wage that exist among different states. Moreover, since families are
contracted and agarbatti workers in these families are mostly women, some child
labour input occurs, mainly to assist the family business.
Bamboo is the preferred species for making sticks, but timber from several other
species are used as substitute. In 1989-90, the preparation of the sticks alone
involved about 30 million workdays. "Rolling" the sticks to glue on the incense
paste and incorporate charcoal powder (the end-product of rolling is "non-masala"
sticks) also employs a large labour force. The raw materials - sticks, paste and
charcoal - are provided by entrepreneurs and the rolling is done largely at
home. Rolled sticks are purchased in units of 1000.
Addition of the incense, to make "masala" agarbatties is usually done in factories
owned by microenterprises. The ratio of labour is approximately 80% home based to
20% factory based. Home based labourers are linked to factories through local
business units.
Finished agarbattis are packed in paper or cardboard tubes. Usually paper from
printing presses or cardboard is supplied to labourers under tie-up arrangements to
produce the requisite packaging.
Previously, bamboo required for making the sticks was available from the Western
Ghats. Currently, most of it comes from North-East India. MacliIus makarantha, the
source for Jigat is rapidly decreasing in South India (where main manufacturing sites
of agarbattis are located) and is increasingly being obtained from the northern states
such as Uttar Pradesh. Charcoal is largely from Prosopis juliflora, which mostly
comes from Tamil Nadu.
The cost of these basic ingredients and the labour to produce the raw agarbattis
accounts for only 10% of the cost of finished agarbattis. Three times that cost represents
the perfumery ingredients of which two-thirds are imported. The various blending and
individual ingredients are generally treated as "trade secrets".
PRODUCTION AND CONSUMPTION PATTERNS
A market survey by the National Council of Applied Economic Research (NCAER)
put the total quantity of agarbatti produced in the country at 147 billion sticks,
valued at around Rs. 7 billion (US$ 196 million) (NCAER 1990). The distribution of
the consumption is skewed in favour of the lower income group, which earns less
than Rs 25,000 (US$ 700) per year but consumes a little over two-thirds of the
production. The highest income group, with above Rs, 56,000 (US$1,570) of annual
income, purchases only 3% of the production.
COST STRUCTURE
There are two stages involved in the production of agarbatti. One stage involves the
production of non-perfumed (non-masala) agarbatti, and the second entails the
production of perfumed (masala) agarbatti. The costs of production can also be
disaggregated by these two stages as labour costs are significantly different in these
two stages.
Non-perfumed agarbattis are generally produced at home through the family
contract system and take up to 80% of the total labour required; its share in the total
production cost, however, is about 10% in preparing raw agarbattis. The addition of
perfumes is carried out in factories and takes about 20% of the total workdays
required for the production and, along with packaging, accounts for about 60% of
the production cost. Another 20% of the cost is incurred in marketing.
EMPLOYMENT SPECTRUM
Agarbatti manufacturing is classified as a small-scale industry. Although there are
bureaucratic hurdles that investors have to go through - such, as the procedures for
getting licenses and tax benefits - the low capital requirement and simple technology
that characterize this industry make it easy to establish units in rural or semi-urban
areas. It is a highly labour-intensive industry and is estimated to be directly engaging
about 500,000 people, mostly women and children.
The packaging and processing are particularly suitable to women and unemployed in
both rural and urban areas since these provide opportunities for labourers seeking
self-employment and piece-meal work. While adult labourers earn Rs 70 - l00/day,
children earn Rs 30 to 50/day depending on the time spent and their efficiency.
MAJOR PROBLEMS FACED BY THE INDUSTRY
Demand for agarbatti sticks is continuously increasing both in domestic and export
sectors. With the gradual abolition of license and permit systems under the new
economic liberalization policy of the state and central governments, the future
prospect for growth and diversification of the industry looks bright. According to a
rough estimate, the US market alone is worth $200 million.
The problems and constraints faced by the industry are related to the following:
1. Raw materials
2. Institutional and policy aspects
3. Advertising and marketing costs
1. RAW MATERIAL
Raw materials are getting scarce and distances involved in transportation are
increasing, thus raising the total cost of production. Currently, bamboo comes
mostly from North-East India and as a result, the wholesale and retail prices of
bamboo culms are rising. Similarly jigat and charcoal are becoming scantier, and
hence costlier, as traditional and local sources are fast drying up.
2. INSTITUTIONAL AND POLICY ASPECTS
Policy issues
Taxes on manufacturing establishments are arbitrary, and small manufacturers are
frequently harassed and penalized by the authorities. Taxation is done on an ad hoc
basis: not only is there a sales tax on the finished product, but most of the raw
materials are also taxed. The burden of taxation is more telling in the case of
perfumes, which are imported.
Labour shortage
Shortage of labour, specifically shortage of workers with experience in the industry,
is hampering further development of the agarbatti industry towards improved quality
and export growth.
Child labour
The issue of child labour in the industry needs to be firmly addressed. A large
number of children work full- or part-time in the industry to supplement their
family’s income. International opinion and norms strongly discourage international
trade in products manufactured using child labour.
3. ADVERTISING AND MARKETING COSTS
Agarbatti producers are getting lower returns on their investment owing to their
complete dependence on middlemen and wholesalers for marketing. Often 60-70%
of the total cost can be due to transportation, marketing and advertising, and retailers
are completely at the mercy of agents and wholesalers. Continuously increasing
transport costs are especially cutting into profit margins. Means of controlling such
costs are lacking because of the non-existence of cooperatives or an effective
association of the agarbatti manufacturers.
PORTER’S FIVE-FORCE MODEL
Rivalry among major competitors
Numerous competitors:
The competition is very high in the industry and many balanced competitors are present
in the industry. Because of which the industry concentration ratio is low.
The major players are: Cycle brand Mangaldeep Z-black Parnami Joie Danim
Price war is there among the competitors to attract customers. They market their
products, give emphasis on advertising, details of all the existing products are available
on their sites on internet even the details of upcoming products are also there.
Among the above given competitors Some brand is the leading one due to following
reasons:
High level of creativity
Stringent quality control
In-house blending
Continuous research and development
Exceptional goodwill generated among trade
Consistent emphasis on relationship building
Ethical practices
Industry growth :
The industry growth is high even the multinational companies are turning towards
this business seeing the demand of product (agarbattis) in domestic and international
market. As an example ITC forayed into agarbatti business.
Storage costs :
The product once produced is not difficult to store. The storage cost is not high as the
product is not vulnerable.
Switching cost :
There is no or very low switching cost which makes the competition more intense.
Bargaining power of suppliers
The natural materials are used in agarbatti making. There are numerous
suppliers of these raw materials so if the supplier charge high prices
company can switch over to other suppliers so the bargaining power of
suppliers is low.
Importance of industry: agarbatti industry is very important or can say
main customer for the suppliers of these raw materials.
The companies purchase the raw materials in bulk which increases the
importance of buyers as for these suppliers this industry is the main
customer of their raw materials.
The purchase of these raw materials represents the significant fraction of
the buyer’s cost as they are the main constituents of incense
stick(agarbatti). So the buyer’s are price sensitive.
These raw materials are undifferentiated and can be purchased easily from
other suppliers.
The buyers generally have the full information about demand, actual
market prices and suppliers cost. This make the buyer(agarbatti industry)
to ensure that it get the raw material in most favorable prices.
This clearly shows that the bargaining power of suppliers is low.
Bargaining power of buyers
In an organized sector the companies provide profit margins to their retailers these
margins are according to their cost of production some provide more margin and some
players provide less margin but this also differentiate their quality. For example Cycle
brand gives less margin to their retailers but they don’t compromise on quality which
differentiate their product and makes loyal customers.
In this industry there is no bargaining power of buyers.
Threat of substitutes
The substitutes of agarbatti are:
1- Dhoop, it is a very strong substitute of incense stick. In man temples dhoop is
used instead of agarbatti. Dhoop is also not a very costly product it prices more or
less same as agarbatti. So it is easy for it to replace agarbatti.
2- Air freshners, Room deodorizers, Coils, Magical charcoal tablets, Aroma candles.
As incense sticks are also used to fresh the air in rooms and other places, to avoid
mosquitoes at home etc for such purposes these substitutes can be used but they are
not very strong substitute of incense stick(agarbatti) because in worship and prayers
only agarbatti is used.
Threat of new entrants
It is a small scale industry, low investment is required, suppliers of raw materials are
easily accessible. There is no or very low switching cost.
There is a product differentiation in organized sector which forms only 20% of the
industry and rest is unorganized sector in which there no differentiation of the product
they are more or less similar.
The firms which are registered and work at some average level are taxable otherwise the
small players in the industry are non-taxable which makes the new entrants easier to
enter.
National and Multinational companies are also seeing the opportunities in the industry as
the demand of agarbattis are increasing in domestic and international market.
The Future
Customs in incense manufacture have changed little over the centuries except in the
range of fragrances offered. In ancient times, only naturally fragrant resins or woods
like sandalwood and patchouli were used for incense. Modern fragrance production
allows virtually any scent to be duplicated, and fragrances are available now that
couldn't be offered before. Examples include green tea, candy cane, blueberry,
pumpkin pie, and gingerbread incense.
The custom of use of incense is also likely to change in the future and in Western
culture. In India, two or three sticks of incense may be burned every day in a typical
home, while, in the United States, users of incense may only burn one stick a week.
Incense-makers hope the variety, effectiveness, and low cost of incense sticks will
make them more popular than air fresheners and room deodorizers made with
artificial perfumes. Also, the popularity of meditation and aromatherapy have
spurred incense sales among clients who want their rare moments of quiet and
relaxation to be healing and beautifully scented.
SWOT Analysis of Agarbatti Industry
STRENGTHS
Large & growing domestic Agarbatti market
Up to date research on New Fragrance
Low cost of raw material both wood and non-wood
WEAKNESS
Small industry structure
Low level of internalization of the industry
OPPORTUNITIES
Enormous domestic market potential
Low labor costs which allows cost effective sorting of imported mixed waste
Export potential
THREATS
Decline in quality due to environmental pressures
Short term planning for raw material
MARKET ANALYSIS
Geographical Area
Geographical area is Jaipur and Sikar as the product is to be launched in the RIICO,
Jaipur.
Objectives of Survey:
Demand analysis.
Demand estimation.
Forecasting demand.
Competitor’s details.
Source of Information Collection: Primary (Market Survey)
Methodology Adopted
1. Defining target population- Randomly almost all types of retailers and
wholeseller are covered.
2. Selecting the sample Convenience sampling
Considering the nature of all retailers in targeted belt as same of those covered for
survey in Jaipur and Sikar survey is done.
3. Sample Size: 50-Retailer , 11- wholesellers.
4. Research Tool: Questionnaire has been used as the research tool for the
study.In all two questionnaires are prepared. One for the retailers and another for
wholesalers. Developed questionnaire has both open and close ended questions .
Language used in the questionnaire is very simple and no jargons are used.
Questions are framed considering the need of information as previously mention
included.’
ANALYSIS OF THE QUESTIONNAIRES
WHOLESELLER
Q1: What is the ratio of sales?
a) Branded
b) Unbranded
Market Pattern
64%
36%
Branded Unbranded
Interpretation :
Unbranded player cover the large % of market. There is a less % of Branded player in the
market. Unbranded and local player cover the 64% market. So in this industry local
manufactures are the key player.
Q2: How much quantity you sell?a) Monthlyb) Weekly
Interpretation: After doing the market survey we found that they sold 80,000/ - packetsMonthly. Means they sold approx 5-6 kg .
Q3: Does co. provide any promotional scheme? a) Gifts b) Commission c) Discount d) Other
Company Trend
9%
9%
82%
0%
Gifts Commission Discount Other
Interpretation: The co. offers the discount scheme to wholeseller mostly, then they offer the commission to wholeseller.
Q4: What margin you get (in %) ---------- Margin1. Branded2. Unbranded
Interpretation:After doing the market survey we found that the wholeseller get the 10-20% margin on branded agarbatti and 8-5% margin on local agarbatti. Q5: Do you get any credit facility from manufacturer?
a) Yesb) No
Credit facility
100%
0%
Yes No
Interpretation: After doing the market survey we found that the maximum manufacturergive the credit facility to wholeseller of 7 days.
Q6: How often you order the stock? a )Monthly b )Weekely
91%
9%
Monthly
Weelky
Interpretation The wholeseller ordered the stock monthly to manufacturer in bulk.
RETAILER QUESTIONNAIRE
Q1: From which sources you purchase?a) Manufacturerb) Whole sellerc) Distributor
Interpretation
Out of 50 retailers 56% said that they purchase agarbatti from whole seller 30% told
that they purchase from Manufacturer and only 14% said they purchase from distributors.
Mean wholeseller plays the main role. This shows that maximum retailers prefer to buy
stock directly from the wholesalers .
Q2: From which place did you get the supply of agarbatti?a) From Rajasthanb) Out of Rajasthan
supply
64%
36%
Out of Rajasthan From rajasthan
Interpretation
In Jaipur and Sikar market the 62% supply of agarbatti is out of Rajasthan and 38%
market is covered by the manufacturer outside the Rajasthan. This shows that maximum
supply is done , out of Rajasthan.
Q3: Do you receive any credit facility from manufacturer or wholeseller?
Credit Facility
75%
20%
5%
7 days 15 days 30 days
Interpretation
75% retailers got the credit facility of 7 days, and 20% found the credit facility of 15 days
and 5% retailer 30 days. This shows that retailers get the credit facility of 7 days.
Q4: What promotion schemes are offered to you? a) Commission b) Gifts c) Discount
Schemes offered
18%
10%
72%
Comision
Gifts
Discount
Interpretation
Most of the retailers get the discount schemes from the wholeseller side and only 10%get
the gifts, like pen stationary and 18% get the commission.
Q5: How frequently you ordera) Weeklyb) Monthly
stock order
80%
20%
Weekly Monthly
Interpretation: The retailer ordered the stock from the wholesaler, weekly as per the
demand they purchased the stock .
Q6: What is the most preferred price range? a) Rs 5-10 b) Rs 10-15 c) Rs 15-20 d) more than 20
Price Preferred
24%
56%
16%
4%
Rs 5-10
Rs10-15
Rs 15-20
Rs 20 and above
Interpretation:
The most preferred price range is Rs 10-15,56% customer prefer the range between 10- 15.
Q7: What do customer look for while purchasing agarbatti? a) Price b) Brand c) Fragrance d) Packaging
0
2
4
6
8
10
12
14
16
18
20
Series1 9 12 9 20
Price Brand Packaging Fragrance
Interpretation As the survey conducted , I have asked the retailer to rate the customers
look most while purchasing agarbatti from them. So 20 retailer ranked 1st to
fragrance , 12 retailers ranked 2nd to brand , and 9 retailer ranked the 3rd both
price and packaging.
\
Q8: Customer purchase agarbatti? a) Monthly b) Weekly
Purchasing Pattern
80%
20%
Monthly
Weekly
Interpretation
Customer purchases the agarbatti from the retailer on monthly basis only 20%
customer purchase the agarbatti on weekly basis. This shows customer like to purchase
agarbatti monthly.
Q9: What margin you get?a) On Brandedb) On Unbranded
Interpretation
From the survey it was found that retailers get the 5-6% margin in branded agarbatti
and 10-20% margin in unbranded agarbatti.
Q10: Which fragrance of agarbatti is preferred most? a) Rose b) Chandanc) Kevara
d) Others
PREFFERED FRAGRANCE
60%
32%
2%
6%
Rose
Chandan
Kevara
Others
InterpretationMost of the retailer preferred rose agarbatti .it is most preferred by the customers, the
ratio is 60%.Then they purchase chandan agarbatti. Only 6%customer not think about the
fragrance at the purchasing time.
MARKETING CHANNEL
Most producers do not sell their goods directly to the final users; between them stands a
set of intermediaries performing a variety of functions. These intermediaries constitute a
marketing channel. The marketing channels just not only serve the markets but they also
make markets.
A new firm typically starts as a local operation selling in a limited market, using existing
intermediaries. Thus, the channel system evolves in response to local opportunities and
conditions.
Currently, the existing marketing channel of the Agarbatti manufactures is as follows:-
MARKETING STRATEGIES
In order to differentiate the product and capture the existing market and to develop strong
customer base, some strategic marketing plan is necessary to be designed and
implemented.
Various strategies that will be used being a new entrant are:-
Steady supply with timely delivery and good quality would be one of the strategic
strength of the marketing plan.
Discount scheme will be offered to the customer like “12 ka 13”.
I would like to capture the large no. of wholeseller , retailer becaue they are the
main intermediatiory.
Manufacturers
Wholesalers
End User
Retailers
Bulk discounts will also be given to the distributors on ordering the bulk order.
Various gifts like calendars, pens, folders, diaries and other utility gifts can be
given to the wholesaler on their anniversaries, birthdays and other occasions.
DEMAND ANALYSIS
After conducting the market survey in the form of questionnaire and interview of the
wholeseller, Retailers, the next step is to estimate the effective demand in the past and the
present.
As per the dealer’s survey, the demand of the agarbatti in Jaipur and Sikar is as follows:-
Total demand in Jaipur is : - 653199 Kg per month
Total demand in Sikar is : - 102066 Kg per month
Total demand 755265 Kg per month
The demand has been calculated on the basis of population of Jaipur and Sikar.
The urban Population of jaipur is 2592067 and Sikar is 472538
From this population the below poverty line was deducted and on the basis
of middle and upper middle class the monthly family consumption of Jaipur and sikar is
180 gm was estimated depending upon the family size of jaipur(6) and Sikar is (7)
Total Demand of Agarbatti is 755265 kg per yr.
SUPPLY ESTIMATION:
The supply has been estimated on the basis of responses of 50 retailers. And the total
no. of retailers estimated in Sikar is 650 and Jaipur is 2350. The total supply of agarbatti
is 139968 kg per yr.
Total Supply: 139968 kg per year
DEMAND -SUPPLY GAP ESTIMATION
Therefore the supply of Agarbatti is 139968 kg per yr from the retailer Survey .
So this demand-supply gap is:
= 755265 kg per yr – 139968 kg per yr
= 615297 kg per yr
There is a large gap between demand and supply and there are many local manufacturer
In jaipur there are approx 30 local manufacturer in jaipur and approx 10 manufacturer in
sikar . The % of each manufacturer is less.
Hence the proposed manufacturing unit would have the installed capacity of 14000 kg
per year and production capacity of 6152 kg per year.
TECHNICAL ANALYSIS OF AGARBATTI MANUFACTURING
The manufacturing process of agarbatti Manufacturing is as follows:
All the ingredients in powder form are mixed well in the proper proportion with water to
a semi solid paste. This paste is applied to bamboo sticks and rolled on wooden-planks
with hands uniformly. The raw sticks are then dried and packed in suitable bundles. For
manufacture of perfumed agarbattis the concentrated perfume is diluted first with white
oil or diethyl phthalate (Generally 1:3) and raw agarbattis are dipped suitably in dipping
trays. The perfumed batties are packed immediately in butter paper bags or
polypropylene bags and finally in printed cartons.
Proportion for making 1 kg incense stick
A. charcoal Powder 300gm
B. Jiget Powder 500 gm
C. Bamboo Stick 300 gm
D. Perfume 400ml
FLOW CHART OF MANUFACTURING PROCESS OF AGARBATTI
Charcoal powder + Jiget Powder mixed with water
Semi solid paste rolled on bamboo Stick
Keep masala sticks for dry
Dip masala stick into White oil
Dip these stick into perfume
Kept dipped stick to soak incense
Perfumed agarbatti obtained
Packaging
Transport
SELECTION OF LOCATION
The location of my project that I am going to select is in Rajasthan in Jaipur.
And the site will be in outskirts of Jaipur there is an industrial area the name is RIICO
industrial area in this place 35 plots are vacant and the rate of the plot is 1300/-per sq.mt.
. That’s why I’ll choose 139.4sq.mt. According to my plant capacity.
Land size for my project.
1. LAND
A piece of land 139.4 sq m 181226
at Riico Industrial Area @Rs 1300 per sq. m.
--------------
Total 1,81,226
--------------
2. BUILDING [ 139.4sq feet @ 301per sq m. ] 42,000
-------------- Total 42,000
Size of the room
Production room 9*8.16 = 73.4sq mtr.
Packaging Room 7*5 = 35 sq meter
Store room 5*5 = 25sq meter
Toilet 3*2 = 6sq meter
TOTAL 139.4 sq m
3. PLANT & MACHINERY
S.No. Description No. Values
1.Weighing balance 10 kg. Capacity
2 No. 2,000/-
2. Hand sieves 100 mesh 6 No. 300/-
3.Wooden Racks 8’ x 6’ x 2’
9 No. 6,750/-
4.Plastic trays 20 lit. Capacity
20 No. 1000/-
5.Aluminum trays for dipping
2 No. 1,600/-
6.Buckets for incense mixing
9 No. 2700/-
Total 14350/-
RECURRING EXPENSES
(i) No. of working day in a year 360
(ii) No. of shifts in a day 1
(iii) No. of working hours in a shift 8
(iv) Employee Potentials 9
(v) Wastage of raw material 1%
COST OF PRODUCTION
RAW MATERIAL CONSUMPTION
Cost of 1 Kg Agarbatti
S. No. Raw Material Weight in gm. Cost in per kg Cost of 1 kg1. Charcoal Powder 300gm. 30/- 9.002. Jiget Powder 400 gm. 10/- 4.003. Bamboo Sticks 300 gm. 22/- 6.64. Perfumes 400 ml. 200/- 80.00 Total Rs-100 per Kg
Yearly Production = 6152* 100 = Rs. 615200/-
POWER CONSUMPTION Monthly consumption is 500 unit
Therefore, yearly consumptions is.6000 unit
Commercial price for each unit is Rs 6
Fixed charges is 600(every month it will be included in the bill)
So, the yearly amount for electricity is Rs. 36000
ADMINISTRATIVE EXPENSES:
MANPOWER NO. REQUIRED WAGE/SALARY( per month in Rs.)
MANAGER 1 10000
SUPERVISOR 1 3000
Other Administrative Expenses
Stationary Expenses 500
Total 13500
Yearly Expense = 13500*12 = Rs.162000/-
SALARY & WAGES
Particulars Nos. Monthly Salary
Total Monthly
Yearly salary(Rs)
(Rs.) salary (Rs.)Unskilled worker 5 2400 12000 144000
Women for Rolling agarbatti(Machine Operator)
23 1200 27160 331200
TOTAL 475200/-
MISCELLANEOUS FIXED ASSETS
S.No. Item Quantity Price Total
1. Tubelight 5 240 1200
2. Fan 4 1190 4760
3. Bulb 2 15 30
4. Chair 3 900 2700
5. Rolling Chair 1 6000 6000
6. Table 1 1000 1000
Total 15660
Legal Environment
Licence is required in two basic perspectives:
Manufacturing licence( payable amount: Rs. 5000)
Procedure: STEP 1: Application STEP 2: Officer Will come for survey STEP 3: Cheking the various parameters STEP 4: Confirmation & licence
Sales licence( payable amount: Rs. 2000)
Process: STEP 1: Filling up the application STEP 2: Submitting the application to sales tax department STEP 3: Receiving the licence
FINANCIAL ANALYSIS
COST OF THE PROJECT
Particulars Rs.(in lakhs)
Land 181226
Building42000
Plant & Machinery14350
Miscellaneous Fixed Assets15660
Preliminary Expenses9698
Preoperative expenses16164
Contingency Margin16164
WC Margin28023
Total 323285
MEANS OF FINANCE
Particulars
Promoter’s Capital107762
Long/Medium Term loan from Banks215523
Total323285
ASSUMPTIONS UNDERLYING FINANCIAL PROJECTIONS
The profitability and other projections may be prepared on the basis of following
assumptions:-
1.) The company would work for 360 days per year on a 1 shift basis. .
2.) The expected capacity utilization will be 44% in first year, 48% in the second
year, and 53% for the third year and so on.
3.) The Sales realization will be Rs 2307000 in the first Year and this will increase
depending upon the increase in production per year
4.) The term loan will be repaid in 14 equal half-yearly installments, with the first
installment due at the end of the second operating year.
5.) The bank finance for working capital will cost 12% interest rate.
6.) The depreciation rates for company law purposes are as follows:-
Building :- 3.34%
Plant and Machinery :- 8%
Miscellaneous Fixed assets :- 5%
12.) The depreciation rates for the income tax purposes are as follows,
under the written down value method:-
Building :- 10%
Plant and Machinery and :- 33.33%
Miscellaneous Fixed assets
13.) The income tax rate applicable is 35%.
BIBLIOGRAPHY
Books referred
Chandra Prasanna, Project-Planning Analysis, Selection,
Financing, Implementation and Review, New Delhi, Tata
McGraw-Hill Publishing Company Limited, Sixth Edition 2006.
Websites referred
www.censusindia.com
www.economywatch.com
www.indiabudget.gov.nic
www.magicbricks.com
www.google.com