[1]

[2]

[SUMMARY ]

� MICROWAVE & RF IN BRIEF Page 3 � EXHIBITORS' PROFILE Page 4 � GUIDE OF NOVELTIES Page 6 � CONFERENCES PROGRAMME: Page 19

• EMC conferences Page 20

• Micro Packaging Page 22

• Innovative radar applications Page 22

• New materials Page 23

• Antennas Page 24

• MIMO Page 25

• Applications conferences Page 26 � SPECIFIC AREAS Page 27

• Meeting Point for Radio Hams Page 27

• Recruitment space Page 27

� CONTACTS Page 28

Microwave & RF will be held in parallel to

[3]

[ IN BRIEF ]

� NAME _____________________________ MICROWAVE & RF 2014

3rd Edition

THE PROFESSIONAL MEETING FOR THE RADIOFREQUENCIES, MICROWAVE, WIRELESS AND OPTICAL FIBRE COMMUNITY

� LOCATION ____________________________________________ CNIT

Paris la Défense Hall Marie Curie � DATES & HOURS ____________________________ 19 & 20 March 2014

Wednesday 19 March � from 9:30 am to 6:00 pm Thursday 20 March � from 9:30 am to 6:00 pm � CONFERENCES _________________________________________ EMC

Wednesday 19 March � from 10:00 am to 12:30 pm and from 2:30 pm to 4:30 pm Thursday 20 March � from 10:00 am to 12:00 am and from 2:00 pm to 4:00 pm � CONFERENCES ____________________________ MICRO PACKAGING

Wednesday 19 March � from 10:00 am to 12:00 pm

� CONFERENCES ______________________________________ RADARS

Wednesday 19 March � from 2:00 pm to 3:30 pm

� CONFERENCES _______________________________ NEW MATERIALS

Wednesday 19 March � from 10:15 am to 12:15 pm and from 2:00 pm to 4:45 pm

� CONFERENCES ____________________________________ ANTENNAS

Thursday 20 March � from 10:00 am to 12:00 am and from 2:00 pm to 4:00 pm

� CONFERENCES ________________________________________"MIMO"

Thursday 20 March � from 10:00 am to 12:00 pm

� EXHIBITORS CONFERENCES ________________________ WORKSHOPS

Wednesday 19 March � from 3:30 pm to 4:30 pm Thursday 20 March � from 2:00 pm to 4:30 pm

[ EXHIBITORS' PROFILE ]

Integrator5%

R & D18%

Education / Training7%

Service Contractor 7%

Association / Organization

1%

Instrumentation /Test

Equipments

Active components

Passive components

Antennas

Software

Sub-assemblies

Systems

Services

Subcontract

Microelectronics Packaging

Others

[4]

[ EXHIBITORS' PROFILE ]

Design Office11%

Software editor 5%

Integrator

Association / Organization

1% Laboratory2%

Others4%

DOMAIN OF ACTIVITY

Instrumentation /Test

Equipments

Active components

Passive components

Antennas

EMC

Software

assemblies

Systems

Services

Subcontract

Microelectronics Packaging

Others

8%

9%

15%

7%

13%

12%

12%

12%

4%

5%

PRODUCTS & SERVICES

[ EXHIBITORS' PROFILE ]

Manufacturer26%

Distributor14%

Design Office

17%

20%

23%

[EXHIBITORS' PROFILE]

Broadcasting

Telecoms: Radio or wireless

Telecom : Spatial

Telecom : cables & Network

Telecom ISM

Navigation / Radar/ Weather forecast

Aeronautics / Space

Automotive / Transportation

Security / Defense

Multimedia

Energy / Nuclear

Computer /SSII / Engineering

Consumer electronics

Health / Medical

Administrations / Local authorities

Measure Instrumentation

Sécurity / Acces Control

APPLICATION

[5]

[EXHIBITORS' PROFILE]

(suite)

Broadcasting

Industry

Telecoms: Radio or wireless

Telecom : Spatial

Telecom : cables & Network

Telecom ISM

Electronics

Navigation / Radar/ Weather forecast

Aeronautics / Space

Automotive / Transportation

Security / Defense

Multimedia

Energy / Nuclear

Computer /SSII / Engineering

Consumer electronics

Electricity

Health / Medical

Administrations / Local authorities

Logistic

Optic

Measure Instrumentation

Sécurity / Acces Control

Others

13%

17%

12%

9%

17%

8%

17%

4%

3%

12%

23%

12%

1%

APPLICATION FIELDS

33%

35%

27%

36%

31%

33%

27%

37%

27%

28%

23%

[ GUIDE OF NOVELTIES ]

Microwave & RF will propose in the exhibition area, the most recent supply in products & services: this edition will be rich in innovations!

Here is the main part of the

� AB2E CEM

Tel : 06 50 41 19 49

Sheet for EASY SHIELD for Can/Box EMI

AB2E CEM developed this new product of last generation to come support customers in RFI/RF/HF/WIFI/WIRELESS… This can is manufacturing directly by customer and at the customer size. This sheet is always in stock and can be delivered in 1 or 2 days. During your EMI tests, you can manufacture yourself the shielding with the form as you want… Advantage: Have a custom design shield � AFJ INSTRUMENTS (1st participation)

AFJ Instruments is a Milan based, Italian Company which mission is to respond to the worldwide requirement of innovative, reliable and cost effective instrdomain of EMC, RF Monitoring, Safety Products, Static Power Sources, Electronic Test & Measurement and Industrial Appliances. Our product range includes FFT EMI Reciever, LISN, Click Analyser, Measuring Transduckind of EMC application according to Standards and to Customize inquiries. � ANSYS

Tel: 01 30 60 15 00

ANSYS 15.0 offers additional capabilities in the electromagcommunication design including:

[6]

[ GUIDE OF NOVELTIES ]

Microwave & RF will propose in the exhibition area, the most recent supply in products & services: this edition will be rich in innovations!

Here is the main part of the exhibitor's new products

Press Contact: Isabelle DENYS Tel : 06 50 41 19 49 - Mail : isabelle.denys@ab2e.fr

EASY SHIELD for Can/Box EMI

AB2E CEM developed this new product of last generation to come mers in RFI/RF/HF/WIFI/WIRELESS… This can is

manufacturing directly by customer and at the customer size. This sheet is always in stock and can be delivered in 1 or 2 days. During your EMI tests, you can manufacture yourself the shielding with the

: Have a custom design shield

participation)

AFJ Instruments is a Milan based, Italian Company which mission is to respond to the worldwide requirement of innovative, reliable and cost effective instrumentation, to comply with Standards in the domain of EMC, RF Monitoring, Safety Products, Static Power Sources, Electronic Test & Measurement

Our product range includes FFT EMI Reciever, LISN, Click Analyser, Measuring Transduckind of EMC application according to Standards and to Customize inquiries.

Press Contact: Pascale Houillon Tel: 01 30 60 15 00 - Mail: pascale.houillon@ansys.com

ANSYS 15.0 offers additional capabilities in the electromagnetic suite that drive highcommunication design including:

• A new single ANSYS installation for all electronic products including HFSS, SIwave and Designer.

• All HFSS user can now use both full 3D MCADbased interface. Design Simulation set up as well as external design import (DXF, GDS, ODB++, etc..) is simplified. The new interface integrates HFSS FEM classic solver as wplanar MoM solver.

• Specialized meshing technology for silicon substrates, redistribution layers, packages and printed circuit boards that creates 3-D meshes up to 30 times faster than previous releases.

Microwave & RF will propose in the exhibition area, the most recent supply in products & services: this edition will be rich in innovations!

exhibitor's new products

Stand E18 �

Stand G22 �

AFJ Instruments is a Milan based, Italian Company which mission is to respond to the worldwide umentation, to comply with Standards in the

domain of EMC, RF Monitoring, Safety Products, Static Power Sources, Electronic Test & Measurement

Our product range includes FFT EMI Reciever, LISN, Click Analyser, Measuring Transducers for any

Stand F16 �

netic suite that drive high-speed wireless

A new single ANSYS installation for all electronic products

All HFSS user can now use both full 3D MCAD or 3D layout imulation set up as well as external

design import (DXF, GDS, ODB++, etc..) is simplified. The new interface integrates HFSS FEM classic solver as well as a 3D

Specialized meshing technology for silicon substrates, s, packages and printed circuit boards that

D meshes up to 30 times faster than previous

• Significant improvement in HPC (high performance computing) to solve on multiple cores on a single or multiple workstations.

• Finite Element-Boundary Integral technology (FEBI) improvement to reduce simulation time or to handle larger model such as a large antenna platform.

• Cable Modeler – Cable harness solutions for the Automotive, Aerospace, and Oil and Gas industries within HFSS, Q3D Extractor, Maxwell, Mechanical, and Fluent. This provides solutions ranging from EMC to multiphysics issues caused by immense pressures.

• The new 3D Component Library feature allows creation of 3D components complete with geometry, materials, boundaries, excitation and parameters. A user can easily share and reuse components. A Waveguide and antennas library is already included. � ATDI - Advanced Topographic Development & Images

Tel: +33 (0) 1 53 30

ATDI designs, develops and commercializes software and services covering the main areas in the design, planning and use of radio networks operating in a range of frequencies from 10 kHz to 450 GHz. ATDI has also developed consultancy services to satisfy all technical needs and constraints and put its know-how and expertise at the service of its customers by offering customized solutions. Amongst others, applications include:

• Simulating the propagation of radi• Planning microwave communication networks• Managing frequency spectrum• Analyzing radio interference• Digital cartography • Command and control systems for radio spectrum• Consultancy for and development of specific software

ATDI operations, which apply to civilian as well as military sectors, are mainly intended for:

• stationary telecommunications operators involved in the deployment of point to multipoint networks (ATDI is the world market leader in the Wireless Local Loop sector)• regulation administrations • radio and television channels• public organizations such as fire• companies and organizations involved in the design of point• mobile phone operators involved in the installationUMTS standard • manufacturers and users of radar and satellite systems

[7]

Significant improvement in HPC (high performance computing) to solve on multiple cores on a

Boundary Integral technology (FEBI) improvement to reduce simulation time or to handle larger model such as a large antenna platform.

Cable harness solutions for the Automotive, Aerospace, and Oil and Gas industries within

xtractor, Maxwell, Mechanical, and Fluent. This provides solutions ranging from EMC to multi-disciplinary physics issues caused by immense pressures.

The new 3D Component Library feature allows creation of 3D components complete with geometry, materials, boundaries, excitation and parameters. A user can easily share and reuse components. A Waveguide and antennas library is already included.

Advanced Topographic Development & Images (1st participation)

Press Contact: Laurent NOVEL +33 (0) 1 53 30 81 41 - Mail : lnovel@atdi.com

ATDI designs, develops and commercializes software and services covering the main areas in the design, planning and use of radio networks operating in a range of frequencies from 10 kHz to 450

also developed consultancy services to satisfy all technical needs and constraints and how and expertise at the service of its customers by offering customized solutions.

Amongst others, applications include: Simulating the propagation of radio electric signals Planning microwave communication networks Managing frequency spectrum Analyzing radio interference

Command and control systems for radio spectrum Consultancy for and development of specific software

s, which apply to civilian as well as military sectors, are mainly intended for:stationary telecommunications operators involved in the deployment of point to multipoint

networks (ATDI is the world market leader in the Wireless Local Loop sector)

radio and television channels public organizations such as fire-fighting and police services companies and organizations involved in the design of point-to-point microwave radio systemsmobile phone operators involved in the installation of the future mobile phone networks on the

manufacturers and users of radar and satellite systems

Significant improvement in HPC (high performance computing) to solve on multiple cores on a

boundaries, excitation and parameters. A user can easily share and reuse components. A Waveguide

Stand G17 �

ATDI designs, develops and commercializes software and services covering the main areas in the design, planning and use of radio networks operating in a range of frequencies from 10 kHz to 450

also developed consultancy services to satisfy all technical needs and constraints and how and expertise at the service of its customers by offering customized solutions.

s, which apply to civilian as well as military sectors, are mainly intended for: stationary telecommunications operators involved in the deployment of point to multipoint

point microwave radio systems of the future mobile phone networks on the

[8]

� AXON’CABLE Stand G18 �

Press Contact: Sandrine HERMANT Tel: 03 26 81 71 41 - Mail: sa.hermant@axon-cable.com

AXON’CABLE OFFER A COMPLETE RANGE OF MICROWAVE COAXIAL CABLES UP TO 50 GHZ

AXOWAVE, AXOLAB and AXOSPEC, the three families of microwave assemblies are used at frequencies from 0 to 40 GHz at temperatures between – 55°C to + 125° C or – 40°C to + 80°C depending on the outer jacket. In addition to its expertise in extrusion techniques, axon’ has developed its own expanded materials, PTFE CELLOFLON® in both extruded or wrapped versions. It allows for optimization of the electrical characteristics of coaxial cables for microwave transmission.

axon’s also offer hybrid harnesses for increasingly complex applications. These harnesses integrate various configurations of wires and terminations such as coaxial cables up to 50 GHz, shielded pairs, fibre optics and many more.

axon’ U series microwave assemblies have been specially designed to have the high bending strength required for dynamic applications (such as radar, surveillance or navigation systems). The 2.5 U version (2.5 mm diameter) for example is able to maintain its electrical properties after 1 million bends (3.0 dB/m at 18 GHz).

Axon’ will exhibit its latest innovative products at Microwave & RF: Micro-D combo connectors and lightweight coaxial cables.

The Axon’ group is specialised in designing and manufacturing conductors, wires, electronic cables, connectors and interconnect solutions for high-tech markets. The company employs 1770 staff world-wide in 10 subsidiaries in Europe, America and Asia. Its consolidated turnover amounts to 115 million Euros in 2013. 70% of the sales are achieved in export. � CCI EUROLAM (1st participation) Stand E11 �

Press Contact: Christine WAECHTER Tel: +33 (0) 6 07 98 04 64

Arlon’s MultiClad HF® is a new halogen-free low-loss system that represents the next generation in low-loss multilayerable thermoset laminate and prepreg systems for microwave and high-frequency printed circuit boards. Key Product Features include:

• Halogen-Free to Address Environmental Standards • Low loss for HF and Microwave Applications • Lead-Free Solder Temperatures / Thermally Robust • High Tg (190oC) and Low Z-Direction Expansion for PTH Reliability • Low TCEr for Phase Stability over Temperature • Low Moisture Absorption • Good Thermal Conductivity (0.55 W/m-K) • Competitive Dk (3.7 at 10 GHz) and Df (0.004) • Stable Loss Values through Thermal Oxidative Ageing • UL-94 V0 Flammability

MultiClad HF® is designed for High-Speed Backplanes and Server boards, Power Amplifiers, Satellite receivers, LNB converters, as well as Semiconductor burn-in-boards and other high speed, high reliability applications.

� COBHAM MICROWAVE

Tel: +33 (0)1 69 59 98 11 Low loss (1dB) cavity filter, C band (4.5better than 60dB up to 36GHz. The size is lower than 80 x 32 x 22 mm. The input power is 20 W at an altitude of 14 000 meters.

Two times 10 cell waveguide duplexer for WBDL applicflange at the antenna. The rejection between channels are greater than 130dB for an overall size of 80 x 80 x 16 mm.

Thanks to its heritage in ceramic filters and to all the internal means for power test, corona tmultipactor test, Cobham has designed and qualified a small size duplexer (100 x 55 x 20 mm) for space application. The out of band rejection is better than 60dB up to 12.5GHz. This duplexer is multipactor free up to 235 W.

Cobham proposes a compin three standard frequency ranges: DC40GHz.Up to 40 switching channels could be addressed in a standard 19 inches

rack unit of 3U high. The RF/Microwave Switch Matrix can be operatnetwork and is shipped with easy

Cobham introduces L-band SMD limiter with very high power handling capability. This item meets 300W, 1 ms, 10% DC in a small QFInsertion loss are as low as 0.8 dB max, Recovery Time at 5 µs @ 100W and Flat leakage at 12 dBm typical.

Cobham introduces a new generation of connectorized Power Dividers for Space application. This new version proposes a sdesign while electrical performances are improved. X, Ku and K frequencies range are covered with configuration from 1:2 up to 1:8.

Cobham’ connectorized Directional Couplers product range integrtechnical evolutions with 30% size and weight saving benefit while electrical performances are improved. These modules cover L band, C Band, S Band and X band while K band is under development.

� COMPELMA (1st participation)

Press Contacts: Hermione DEFAYE or Frédéric MOUTAILLERTel: 01 69 75 21 21

COMPELMA presents its new series of EE gaskets

COMPELMA presents its new series of EE gaskets, combining both IP sealing and electrical continuity. These gaskets, wire encapsulated to remove any elongation during the handling, and to facilitate its placement in a groove by preforming them.

A large number of sections are already availab67 sealing level. Other sections may also be made upon request, adapted to your existing groove design.All of these gaskets is available in reels or cut and vulcanized to a specific length.

Electrical continuity is ensured by a deposit of particles such as Ni / C, Ni / Al, Glass / Ag, Cu / Ag and others.... with a partial overlap of the silicone core, reducing material costs and implementation in a range of 15-30 %.

[9]

Press Contact: Valérie Le Fustec Tel: +33 (0)1 69 59 98 11 - Mail: valerie.lefustec@cobham.com

C band (4.5-4.9 GHz) for defense application. The out of band rejection is better than 60dB up to 36GHz. The size is lower than 80 x 32 x 22 mm. The input power is 20 W at an

Two times 10 cell waveguide duplexer for WBDL application, Tx/Rx SMA conectorized; wave guide flange at the antenna. The rejection between channels are greater than 130dB for an overall size of

Thanks to its heritage in ceramic filters and to all the internal means for power test, corona tmultipactor test, Cobham has designed and qualified a small size duplexer (100 x 55 x 20 mm) for space application. The out of band rejection is better than 60dB up to 12.5GHz. This duplexer is

Cobham proposes a compact and configurable RF/Microwave Switch Matrix in three standard frequency ranges: DC-18GHz, DC40GHz. Up to 40 switching channels could be addressed in a standard 19 inches

rack unit of 3U high. The RF/Microwave Switch Matrix can be operated via 10/100Mbs Ethernet network and is shipped with easy-to-operate graphical user interface software for control from a PC.

band SMD limiter with very high power handling capability. This item meets 300W, 1 ms, 10% DC in a small QFN package (8.5 x 5.5 x 3 mm). Insertion loss are as low as 0.8 dB max, Recovery Time at 5 µs @ 100W and Flat

Cobham introduces a new generation of connectorized Power Dividers for Space application. This new version proposes a significant size and weight reduction, 30% versus former design while electrical performances are improved. X, Ku and K frequencies range are covered with configuration from 1:2 up to 1:8.

Cobham’ connectorized Directional Couplers product range integrtechnical evolutions with 30% size and weight saving benefit while electrical performances are improved. These modules cover L band, C Band, S Band and X band while K band is under development.

ss Contacts: Hermione DEFAYE or Frédéric MOUTAILLER 75 21 21 - Mail: defaye@compelma.com or moutailler@compelma.com

COMPELMA presents its new series of EE gaskets

COMPELMA presents its new series of EE gaskets, combining both IP sealing and lectrical continuity. These gaskets, in co- extruded silicone, may optionally be

wire encapsulated to remove any elongation during the handling, and to facilitate its placement in a groove by preforming them.

A large number of sections are already available. They allow you to achieve the IP 67 sealing level. Other sections may also be made upon request, adapted to your existing groove design.

All of these gaskets is available in reels or cut and vulcanized to a specific length.

nsured by a deposit of particles such as Ni / C, Ni / Al, Glass / Ag, Cu / Ag and others.... with a partial overlap of the silicone core, reducing material costs and implementation in a

Stand E17/D14 �

4.9 GHz) for defense application. The out of band rejection is better than 60dB up to 36GHz. The size is lower than 80 x 32 x 22 mm. The input power is 20 W at an

ation, Tx/Rx SMA conectorized; wave guide flange at the antenna. The rejection between channels are greater than 130dB for an overall size of

Thanks to its heritage in ceramic filters and to all the internal means for power test, corona test and multipactor test, Cobham has designed and qualified a small size duplexer (100 x 55 x 20 mm) for space application. The out of band rejection is better than 60dB up to 12.5GHz. This duplexer is

act and configurable RF/Microwave Switch Matrix 18GHz, DC-26.5GHz and DC-

Up to 40 switching channels could be addressed in a standard 19 inches ed via 10/100Mbs Ethernet

operate graphical user interface software for control from a PC.

band SMD limiter with very high power handling capability. This N package (8.5 x 5.5 x 3 mm).

Insertion loss are as low as 0.8 dB max, Recovery Time at 5 µs @ 100W and Flat

Cobham introduces a new generation of connectorized Power Dividers for Space ignificant size and weight reduction, 30% versus former

design while electrical performances are improved. X, Ku and K frequencies range are covered with

Cobham’ connectorized Directional Couplers product range integrates the last technical evolutions with 30% size and weight saving benefit while electrical performances are improved. These modules cover L band, C Band, S Band and X

Stand F24 �

moutailler@compelma.com

All of these gaskets is available in reels or cut and vulcanized to a

nsured by a deposit of particles such as Ni / C, Ni / Al, Glass / Ag, Cu / Ag and others.... with a partial overlap of the silicone core, reducing material costs and implementation in a

[10]

� CREATIVE EURECOM Stand C14 �

The Creative Eurecom company is an applied electronics R & D laboratory that ensures all steps of design, development and manufacture of specific products integrating different technologies (radio technologies, telecommunications, specific sensors, plastics, mechanical, etc. ) . Creative Eurecom offers its skills in design, development and manufacture of specific systems. Our customers are companies like AIRBUS , DGA, THALES , Direction Générale de l’Aviation Civile , CNES , CEA, but also small companies and Start-ups .

Our specialization is Radio-freqency and we have all necessary equipments. The Crossway Technologies company is our subsidiary plant located on the same place in Angers that manufacture products designed by the Creative Eurecom company.

Our realizations: - Design, development and manufacture of an embedded wireless sensors network - Design, development, manufacture and installation of a decision support system for air controllers (French Civil Aviation). This system is installed on all major French airports such as Roissy , Orly , Saint Exupéry , Strasbourg, Beauvais , Lille, Saint Pierre and Miquelon , and other - Design, development and manufacture of the embedded equipments in weather balloons and balloons constellations (sensors and telemetry , satellite link ARGOS , IRIDIUM and GPS) - Design, development and manufacturing of a tri-band test bench for Galileo , Glonass and GPS ( ATOS program) � DETI (1st participation) Stand D23 �

Press Contact: Aude PICARD Tel : 02 98 47 90 57 - Mail : aude.picard @ deti-sa.com

Deti offers a multioctave broadband range of combiners from 10 KHZ to 6 GHz and for high power from 150 W to 12 KW. To widen this range Deti offer power combining solutions for satellite Ka band. Its latest design (cf. picture) is a 16 ways compact combiner which have high compactness and great performances for high speed military satellite telecommunications.

Among its latest news, Deti point out a range of Up & Down converters for point-to-point or point-to-multipoint transmission. Those compact and rugged receivers-transmitters suit the needs of wireless broadband communications for offshore or shipping connections or for white area coverage. It especially fits in with the use for Ku and Q band links. It is also compatible with a wide variety of modems (it bears modulations till 16 QAM for several frequency band).

Deti is as well developing a new range of fast pin diodes switches from 2 to 8 ways. The technology used allows a very wide band use (0.5-18 GHz) with low loss and high isolation. The control input, with or without TTL driver, allows a fast switching despite low power consumption and reduced dimensions. Those switches are available in different versions: « enable », absorptive, reflective, supply in +5V/-5V or +5V/-15V, EMC shielding…

Finally, Deti still makes its technical and technological know-how serve solving problems related to obsolete parts for on–board electronic systems: microwave modules, components and antennas for radars systems and electronic warfare.

� DICONEX

Diconex announces a new range of products

This new range of Stripline Terminations offers the highest level of power of the market combined with the widest frequency range in a size allowing a remarkablintegration.

� EMC PARTNER France (1st participation)

World class at a touch IMU3000 Immunity Tester with 8kV pulses and colour graphicsA constantly evolving market needs new i

Covering all international standards, IMU3000 combines Surge voltages up to 8kV with EFT up to 6kV to make IMU3000 the automatic choice for manufacturers and test labs. IMU3000 is setup simpler and faster.the ordinary. Ethernet interface enables control, communication and custom report generation.Touch the future!

� EM TEST France (1st participation)

Tel : 03.89.31.23.50. Mail

Leader in ElectroMagnetic Compatibility (EMC) for fifteen years, we study all projects and answer all questions and needs.

EM TEST offers a wide range of testing devices in the field of immunity to conducted disturbances, designed with new technological advances and always at the forefront of the latest European and international standards. Our generators are accompanied by comprehensive and powerffriendly tests, and all the necessary accessories.

For example, AC / DC sources NetWave now have a Power Recovery option that allows them to reinject power into the supply network. These sources are intendedto simulate a large number of disturbances (over 17 000 preprogrammed tests) on a single or three

EM TEST FRANCE exclusively represents PMM’s products, developed for the measurement of conducted and radiated emissions. Equipped with

measurement and very friendly operating possibilities, prequalification or fullfrom 10 Hz to 18 GHz. All measurement accessories are also available.

[11]

announces a new range of products ‘’High Power Broadband’’

This new range of Stripline Terminations offers the highest level of power of the market combined with the widest frequency range in a size allowing a remarkable

Specially designed for digital TV transmitters, the products present a very low level for VSWR < 1.06 in the TV band, but the band wide allows many others RF applications such particle accelerators.

• 1650W & 1500W in a size 48x32mm up to 1.5• 1350W in a size 48x26mm up to 1.5 GHz• 500W in a size 32x13mm up to 4GHz

participation)

IMU3000 Immunity Tester with 8kV pulses and colour graphics A constantly evolving market needs new ideas and new technologies. A graphical user interface with

intuitive touch panel that every mobile device user will recognise makes IMU3000 the most popular addition in every EMC laboratory. Extend test capability with on-site upgrades, reduce service costand increase system availability. Users can exchange premodules on site to make the most of IMU3000s innovative time and money saving features. Have the tester YOU want. Choose from any combination of; ESD, EFT, CWG, RINGWAVE, 10/700us, AC/DC DIPS, INTERRUPTS and VARIATIONS, COMMON MODE and both AC and IMPULSE MAGNETIC FIELDS.

Covering all international standards, IMU3000 combines Surge voltages up to 8kV with EFT up to 6kV to make IMU3000 the automatic choice for manufacturers and test labs. Packed with new features IMU3000 is setup simpler and faster. A wide range of accessories extend IMU3000 application beyond

Ethernet interface enables control, communication and custom report generation.

participation)

Press Contact:: Jonathan OBERLÉ Tel : 03.89.31.23.50. Mail : info@emtest.fr

Leader in ElectroMagnetic Compatibility (EMC) for fifteen years, we study all projects and answer all

range of testing devices in the field of immunity to conducted disturbances, designed with new technological advances and always at the forefront of the latest European and international standards. Our generators are accompanied by comprehensive and powerful software to make the most effective and userfriendly tests, and all the necessary accessories.

For example, AC / DC sources NetWave now have a Power Recovery option that allows them to reinject power into the supply network. These sources are intendedto simulate a large number of disturbances (over 17 000 preprogrammed tests) on a single or three-phase power supply.

EM TEST FRANCE exclusively represents PMM’s products, developed for the measurement of conducted and radiated emissions. Equipped with advanced technologies, the receiver family provides comprehensive

measurement and very friendly operating possibilities, prequalification or full- compliant CISPRfrom 10 Hz to 18 GHz. All measurement accessories are also available.

Stand D19 �

e

Specially designed for digital TV transmitters, the products present a very low level for VSWR < 1.06 in the TV band, but the band wide allows many others RF

1650W & 1500W in a size 48x32mm up to 1.5 GHz 1350W in a size 48x26mm up to 1.5 GHz

Stand D18 �

deas and new technologies. A graphical user interface with intuitive touch panel that every mobile device user will recognise makes IMU3000 the most popular addition in every EMC laboratory.

site upgrades, reduce service costs and increase system availability. Users can exchange pre-calibrated modules on site to make the most of IMU3000s innovative time and

Have the tester YOU want. Choose from any combination of; ESD, DIPS, INTERRUPTS and

VARIATIONS, COMMON MODE and both AC and IMPULSE

Covering all international standards, IMU3000 combines Surge voltages up to 8kV with EFT up to 6kV Packed with new features

A wide range of accessories extend IMU3000 application beyond Ethernet interface enables control, communication and custom report generation.

Stand F13 �

Leader in ElectroMagnetic Compatibility (EMC) for fifteen years, we study all projects and answer all

range of testing devices in the field of immunity to conducted disturbances, designed with new technological advances and always at the forefront of the latest European and international standards. Our generators are accompanied by

ul software to make the most effective and user-

For example, AC / DC sources NetWave now have a Power Recovery option that allows them to reinject power into the supply network. These sources are intended to simulate a large number of disturbances (over 17 000 preprogrammed tests) on

EM TEST FRANCE exclusively represents PMM’s products, developed for the

advanced technologies, the receiver family provides comprehensive compliant CISPR-16-1,

[12]

EM TEST FRANCE is also specialized in the measurement of electromagnetic fields in the area of health and the environment. We offer innovative and user friendly fieldmeters, suitable for professionals and public users. The latest innovation is a low frequency field analyzer, the NHT 3D, which has amazing performance. (Record, analysis, instantaneous display, integrated GPS Logger, etc.)

� E.T.S.A. (1st participation) Stand F17 �

Press contact: Maud LAHIERLE Tél. +33 (0)2 47 55 40 55 - Mail: Maud.Lahierle@etsa.fr

Ultralinear amplifier using feedforward technology

This amplifier is dedicated to high linearity applications, particulary those using complex modulations (LTE, WiMAX, TETRA) and also for MCPA applications. This amplifier uses the latest techniques with digital feedforward correction, which allow excellent performances stability. Available in 400MHz band, it can be delivered in other telecom frequency bands. The power of this amplifier is 30W, with an 3rd order interception point of +76dBm typical. � FREC’N’SYS Stand G21 �

Press contact: Julien WEIBEL Tel: +33 (0) 3.81.25.53.63 - Mail: julien.weibel@frecnsys.fr

Frec’n’sys is a start-up from the public research which designs, products and commercializes SAW (surface acoustic wave), BAW (bulk acoustic wave) components for sensors, filters, and

radiofrequency sources on piezoelectric material wafers. Working with public organizations, the company has an innovative program closely linked to industrials issues. Its products concern physical measurement/Metrology, Defense, Spatial and Telecom. Frec’n’sys is specialized in sensors for harsh environment: high temperature (>500°C), pressure, magnetic fields,

ionizing radiations, and so on. The company provides to its customers specific solutions in order to be the closest to their technological needs. We have competences in the development of new transducer and wave guide concepts. Using our own numerical tools for design and analysis purpose, we are able to control the whole production chain exploiting an adaptable and high technology production line in class-100 clean room environment (from prototyping to production). Frec’n’sys deals with project developments from the “client idea” to the production. Examples of developed products: Passive wireless SAW sensors operating in harsh environments (temperature in excess of 500°C) for measuring temperature, pressure, acceleration, and so on for predictive maintenance/health monitoring applications SAW-Tag RFID in harsh-environment for identifiable accurate and robust sensing Specifics filters and resonators for spatial and defense strategic activities (multiplexing, mixing, time/frequency reference) � HAEFELY-EURO SYSTEM (1st participation) Stand G20 �

Press Contact: JM CLERC Tel. 04 74 22 09 48 - Mail: euro-system@orange.fr

AXOS 8: New HAEFELY HIPOTRONICS Immunity Test System simulates Surge Combination Wave, Telecom Surge, EFT/Burst, Ring Wave and AC/DC Voltage Dips in one single box

HAEFELY HIPOTRONICS, a leading developer and provider of EMC instrumentation and systems for conducted immunity testing, announces the launch of the new AXOS8 Compact Immunity Test System.

The new AXOS8 Immunity Test System follows the success story of the AXOS5 family but comes up with a higher voltage of 7 kV and more wavefUnlike the AXOS 5 Immunity Test System, which features the simulation of Surge Combination Wave, EFT/Burst, AC/DC Dips and Interrupts only, the AXOS 8 is designed to perform tests for simulating Surge Combination Wave, Telecom Surgeas well. Full compliance testing according to IEC 61000Combination Wave & Telecom Wave), IEC/EN 61000(Ring Wave) and IEC/EN 61000with only one single box.

An innovative and user-friendly touch screen interface, industrycomprehensive safety features and compatibility wiCDN’s are rounding up this master piece of engineering

ONYX ESD Simulator: Designed to perform according to customer expectations, the ONYX has proven that it is simply not just another ESD simulator on the m

simulators that combine cutting edge technology, true ergonomic design, and an intelligent operation concept. Since its release in early 2010, the ONYX has gained significant market share and is considered by many EMC tprofessionals in all corners of the world as an essential testing tool for every type of ESD test. Available in 16kV or 30kV versions, the ONYX is a modular battery or mains operated ESD simulator. As everything is integrated in the unit itsneed for an external base unit or additional cables, offering flexibility in movement and ensuring users remain focused on the work area. True ergonomic design offers maximum comfort while never seen before features such as a smart

key (used for polarity switching, resetting counter and increasing/decreasing voltage to a desired level), ensures you are working fast and effectively without having to go in and out the touch screen menu.

Test & Measurement World’s annual Best in Test awards,innovative new products and services in the electronics test and measurement industry, as well as outstanding industry professionals. The Best in Test program is now in its 21st year and continues the proud tradition of recognizing excellence in the test, measurement, and inspection community. � INFRACTIVE (1st participation)

Tel : 01 75 49 81 30

Infractive is a french specialized distributor of components, test and measurement equipment, and transmission sub-systems for telecom infrastructure. In the Microwave & RF field we provide solutions for research laboratories, industry, equipment product offering includes:

• Components o Low phase noise programmable frequency dividers, o Broadband amplifiers modules, high power and high gain amplifiers for microwave test beds, o Ultra-wide band amplifiers D30/45/65 GHz GaAs MMIC switches and attenuators, o Analog transmission systems Radio on Fiber (RoF) next generation, o Asics (SERDES, variable delay line, transimpedance amplifier, signal generator, phase detector, interface converter),o RF connectors and cables.

• Test and measurement equipmento Propagation radio channel emulators,o Solutions for quality Improving of the wireless network : PIM Analyzers, GPS antenna alignment tools.

[13]

The new AXOS8 Immunity Test System follows the success story of the AXOS5 family but comes up with a higher voltage of 7 kV and more waveforms on board as well. Unlike the AXOS 5 Immunity Test System, which features the simulation of Surge Combination Wave, EFT/Burst, AC/DC Dips and Interrupts only, the AXOS 8 is designed to perform tests for simulating Surge Combination Wave, Telecom Surge, EFT/Burst, Ring Wave up to 7 kV and AC/DC Voltage Dips as well. Full compliance testing according to IEC 61000-4-4 (EFT/Burst), IEC/EN 61000Combination Wave & Telecom Wave), IEC/EN 61000-4-9 (Surge Magnetic Field), IEC/EN 61000

e) and IEC/EN 61000-4-11 and -29 (AC/DC Dips and Interrupts) can be easily simulated

friendly touch screen interface, industry-leading design and quality, comprehensive safety features and compatibility with all existing manual HAEFELY HIPOTRONICS CDN’s are rounding up this master piece of engineering.

ONYX ESD Simulator: Designed to perform according to customer expectations, the ONYX has proven that it is simply not just another ESD simulator on the market, but a brand new generation of

simulators that combine cutting edge technology, true ergonomic design, and an intelligent operation concept. Since its release in early 2010, the ONYX has gained significant market share and is considered by many EMC tprofessionals in all corners of the world as an essential testing tool for every type of ESD test. Available in 16kV or 30kV versions, the ONYX is a modular battery or mains operated ESD simulator. As everything is integrated in the unit itsneed for an external base unit or additional cables, offering flexibility in movement and ensuring users remain focused on the work area. True ergonomic design offers maximum comfort while never seen before features such as a smart

ed for polarity switching, resetting counter and increasing/decreasing voltage to a desired level), ensures you are working fast and effectively without having to go in and out the touch screen

Test & Measurement World’s annual Best in Test awards, launched in 1991, honor important and innovative new products and services in the electronics test and measurement industry, as well as outstanding industry professionals. The Best in Test program is now in its 21st year and continues the

of recognizing excellence in the test, measurement, and inspection community.

participation)

Press Contact: Clara TROUCHET : 01 75 49 81 30 - Mail : clara.trouchet@infractive.fr

Infractive is a french specialized distributor of components, test and measurement equipment, and systems for telecom infrastructure. In the Microwave & RF field we provide solutions

for research laboratories, industry, equipment manufacturers and mobile network operators. Our

Low phase noise programmable

Broadband amplifiers modules, high power and high gain amplifiers for

wide band amplifiers DC 30/45/65 GHz GaAs MMIC switches and

Analog transmission systems Radio on

Asics (SERDES, variable delay line, transimpedance amplifier, signal generator, phase detector, interface converter),

Test and measurement equipment Propagation radio channel emulators, Solutions for quality Improving of the wireless network : PIM Analyzers, GPS antenna alignment

The new AXOS8 Immunity Test System follows the success story of the AXOS5 family but comes up

Unlike the AXOS 5 Immunity Test System, which features the simulation of Surge Combination Wave, EFT/Burst, AC/DC Dips and Interrupts only, the AXOS 8 is designed to perform tests for simulating

, EFT/Burst, Ring Wave up to 7 kV and AC/DC Voltage Dips 4 (EFT/Burst), IEC/EN 61000-4-5 (Surge

9 (Surge Magnetic Field), IEC/EN 61000-4-12 29 (AC/DC Dips and Interrupts) can be easily simulated

leading design and quality, th all existing manual HAEFELY HIPOTRONICS

ONYX ESD Simulator: Designed to perform according to customer expectations, the ONYX has proven arket, but a brand new generation of

simulators that combine cutting edge technology, true ergonomic design, and an intelligent operation concept. Since its release in early 2010, the ONYX has gained significant market share and is considered by many EMC testing professionals in all corners of the world as an essential testing tool for almost

Available in 16kV or 30kV versions, the ONYX is a modular battery or mains operated ESD simulator. As everything is integrated in the unit itself, there is no need for an external base unit or additional cables, offering flexibility in movement and ensuring users remain focused on the work area. True ergonomic design offers maximum comfort while never seen before features such as a smart

ed for polarity switching, resetting counter and increasing/decreasing voltage to a desired level), ensures you are working fast and effectively without having to go in and out the touch screen

launched in 1991, honor important and innovative new products and services in the electronics test and measurement industry, as well as outstanding industry professionals. The Best in Test program is now in its 21st year and continues the

of recognizing excellence in the test, measurement, and inspection community.

Stand D21 �

Infractive is a french specialized distributor of components, test and measurement equipment, and systems for telecom infrastructure. In the Microwave & RF field we provide solutions

manufacturers and mobile network operators. Our

transimpedance amplifier, signal generator, phase detector, interface converter),

Solutions for quality Improving of the wireless network : PIM Analyzers, GPS antenna alignment

• Indoor and outdoor transmission subo Bi- sector antennas array foo Solutions for coverage enhancement : repeaters, DAS, TMA, multi Cell extenders, o Site sharing solutions to reduce operating costs: tunable filters, combiners, duplexers, muxplexers.

� MATECH ELECTRONIQUE

Tel: +33 (0) 1 69 85 45 45 • Picosecond Pulse Labs’ Pattern Generator 12072 combines instrument quality fast risetime

outputs (25ps) with programmable ddelay, jitter insertion, and patterns. It comes with 1, 2 or 4 output channels delivering up to 2V. When used with the 13020 Error Checker, it provides a Bit Error Rate Test (BERT) solution that combines high

performance, key features, and flexibility at an economical price.

• Holzworth just released a new generation of fast switching and ultra wide-band Synthesizers up to 18GHz. The compact dimensions make them easy to integrate into subtrue phase coherent systems with up to 8 channels.

•

and made in FRANCE (no export control). These high performance components, including model 1

• DUCOMMUN is a worldwide leader in ELECTROMECANIC SWITCHES

high performances, up to 40GHz including airborne qualified switches for Traffic Collision Alerting System (TCAS).

• Maury Microwave is a world leader in precision calibration and

Interconnectstability and low loss cables.

� MICRO SYSTEMS ENGINEERING

Tel : 04 71 61 65 65

Micro Systems Engineering in Berg, Germamicroelectronics. After continuous growth over the past 30 years, the company is now among Europe’s technological leaders in the field of LTCC, other ceramic substrates and advanced assembly technologies.

LTCC Technology: LTCC standing for Low Temperature Cosintering temperature – around 900°C and gold. The technology supports the emminiaturization.

Further features and applications- Multilayer technology up to more than 20 layers- Fine line patterning (<50 µm in selected area)- High frequency performance up to 90GHz by - Adjusted thermal expansion factor to Si and GaAs- Short wire bonds due to capability of precise cavity generation- Thermal vias for heat dissipation- Soldering of heat sinks, frames and nail head pins

In addition to the extensive knowadvanced assembly technology. MSE’s development and production capabilities for assembly and packaging cover the full portfolio from the chip to the finished module.

[14]

Indoor and outdoor transmission sub-systems sector antennas array for increasing the quality of your wireless access network,

Solutions for coverage enhancement : repeaters, DAS, TMA, multi -carriers amplifiers MCPA,

Site sharing solutions to reduce operating costs: tunable filters, combiners, duplexers,

ELECTRONIQUE

Press Contact: Julien Bigot Tel: +33 (0) 1 69 85 45 45 - Mail: julien.bigot@matech.fr

Picosecond Pulse Labs’ Pattern Generator 12072 combines instrument quality fast risetime outputs (25ps) with programmable data rate (up to 32Gb/s), channel delay, jitter insertion, and patterns. It comes with 1, 2 or 4 output channels delivering up to 2V. When used with the 13020 Error Checker, it provides a Bit Error Rate Test (BERT) solution that combines high

ey features, and flexibility at an economical price.

Holzworth just released a new generation of fast switching and ultra band Synthesizers up to 18GHz. The compact dimensions make them

easy to integrate into sub-system. Multichannel versions are atrue phase coherent systems with up to 8 channels.

AA-MCS is providing new kinds of ultra wide-band couplers designed and made in FRANCE (no export control). These high performance components, including model 1-44GHz, are unique in Europe

DUCOMMUN is a worldwide leader in ELECTROMECANIC SWITCHES high performances, up to 40GHz including airborne qualified switches for Traffic Collision Alerting System (TCAS).

Maury Microwave is a world leader in precision calibration and Interconnect Solutions: Calibration Kit, precision adapters, measurement, phase stability and low loss cables.

MICRO SYSTEMS ENGINEERING

Press Contact: Marc SAVEL Tel : 04 71 61 65 65 - Mail : marc.savel@abac.fr

Micro Systems Engineering in Berg, Germany specializes in customized solutions for advanced microelectronics. After continuous growth over the past 30 years, the company is now among Europe’s technological leaders in the field of LTCC, other ceramic substrates and advanced assembly

LTCC standing for Low Temperature Co-fired Ceramics is a multilayer ceramic technology. The low around 900°C – allows the usage of noble high conductivity metals as silver

and gold. The technology supports the embedding of resistors and capacitors, contributing to further

Further features and applications Multilayer technology up to more than 20 layers Fine line patterning (<50 µm in selected area) High frequency performance up to 90GHz by use of low loss ceramic Adjusted thermal expansion factor to Si and GaAs Short wire bonds due to capability of precise cavity generation Thermal vias for heat dissipation Soldering of heat sinks, frames and nail head pins

ive know-how in the field of ceramic multilayer, MSE is also a leader in advanced assembly technology. MSE’s development and production capabilities for assembly and packaging cover the full portfolio from the chip to the finished module.

r increasing the quality of your wireless access network, carriers amplifiers MCPA,

Site sharing solutions to reduce operating costs: tunable filters, combiners, duplexers,

Stand D12 �

Picosecond Pulse Labs’ Pattern Generator 12072 combines instrument quality fast risetime ata rate (up to 32Gb/s), channel

delay, jitter insertion, and patterns. It comes with 1, 2 or 4 output channels delivering up to 2V. When used with the 13020 Error Checker, it provides a Bit Error Rate Test (BERT) solution that combines high-

Holzworth just released a new generation of fast switching and ultra band Synthesizers up to 18GHz. The compact dimensions make them

system. Multichannel versions are available to get

band couplers designed and made in FRANCE (no export control). These high performance

44GHz, are unique in Europe.

DUCOMMUN is a worldwide leader in ELECTROMECANIC SWITCHES high performances, up to 40GHz including airborne qualified switches for Traffic

Maury Microwave is a world leader in precision calibration and Solutions: Calibration Kit, precision adapters, measurement, phase

Stand F20 �

ny specializes in customized solutions for advanced microelectronics. After continuous growth over the past 30 years, the company is now among Europe’s technological leaders in the field of LTCC, other ceramic substrates and advanced assembly

fired Ceramics is a multilayer ceramic technology. The low allows the usage of noble high conductivity metals as silver

bedding of resistors and capacitors, contributing to further

how in the field of ceramic multilayer, MSE is also a leader in advanced assembly technology. MSE’s development and production capabilities for assembly and

MSE has a broad range of experience with commonly used processes like wire bond, die attach and flip chip, CSP and standard SMT processes using solder or adhesives as well as very special, partially proprietary packaging technologies. MSE also offers transfer moldequantities. MSE covers the full range from design support over substrate manufacturing to advanced assembly and packaging out of one hand at the highest quality level. Offering solutions for high frequency packages, sensors packages, multispace, radar, automotive and sensor applications. MSE is an MST � NEXIO GROUP

Press ContactTel: +33 (0) 5 61 44 02 47

BAT-ELEC is an innovation in NEXIO's uses dedicated to transitional tests

Facing new challenges in technical, productivity and economic sectors, NEXIO has developed BATELEC, the only software which realizes transitional electrical tests compatible with generators of all customers and for all civil (ex IEC 61000standards.

This “Made in France” software named BATELEC, communicates with German, English, Americans, Swiss, Japanese instruments.“Our French and German customers ordered the BAT-ELEC Software before it has even been created. With BAT-ELEC, they choose the best generators according to their technical, quality and budgetary requirements, without being compelled by the past choices”, says Nexio’s Products Manager, very enthusiastic. On the productivity side, with BATusers don’t need several softwares anymore to realize their transitional tests. That’s thend of transferring files with incompatible formats, the “cut and paste” in the reports and the training on each software and instrument. “With BAT-ELEC, I only have one software to control all my generators, that makes senseresponsible of a huge automotive laboratory. Then he added : “team is more multi-skilled and we have the possibility to group our results and generate our tests reports in same one environment!”

BAT-ELEC is completing the BAT90% of COFRAC laboratory, specialized in EMC.

� NOLATO SILIKONTEKNIK AB

Tel: +4658288927

Successful EMI shielding solutions from Nolato!Nolato Silikonteknik is a world leading developer and supplier of material and knowsolutions made of electrically conductive silicone.

The end products are produced by our own EMC Production Centers, or licensed EMC production partners in a number of different countries over the world and used in high-tech industries such as telecom, automotive, medical and security.

Trishield®, Nolato Silikonteknik’s unique dispensing technology, has been widely used for ove

[15]

broad range of experience with commonly used processes like wire bond, die attach and flip chip, CSP and standard SMT processes using solder or adhesives as well as very special, partially proprietary packaging technologies. MSE also offers transfer molded BGA packages for midsized

MSE covers the full range from design support over substrate manufacturing to advanced assembly and packaging out of one hand at the highest quality level. Offering solutions for high frequency

kages, multi-chip modules and reliability substrates and modules in avand sensor applications. MSE is an MST company. www.mst.com/msegmbh

Press Contact: Frédéric AMOROS-ROUTIÉ l: +33 (0) 5 61 44 02 47 - Mail: sales@nexiogroup.com

ELEC is an innovation in NEXIO's uses dedicated to transitional tests

Facing new challenges in technical, productivity and economic sectors, NEXIO has developed BATC, the only software which realizes transitional electrical tests compatible with generators of all

customers and for all civil (ex IEC 61000-4-4/4-5), automotive (ex ISO 16750

This “Made in France” software named BAT-mmunicates with German, English,

Americans, Swiss, Japanese instruments. Our French and German customers ordered

ELEC Software before it has even ELEC, they choose

the best generators according to their d budgetary

requirements, without being compelled by the ”, says Nexio’s Products Manager,

On the productivity side, with BAT-ELEC, the users don’t need several softwares anymore to realize their transitional tests. That’s the end of transferring files with incompatible formats, the “cut and paste” in the reports and the training on each software and instrument.

ELEC, I only have one software to control all my generators, that makes senseuge automotive laboratory. Then he added : “So much time and security saved! Our

skilled and we have the possibility to group our results and generate our tests reports in same one environment!”

ELEC is completing the BAT-EMC’s range initiated by NEXIO, for almost 20 years and uses by 90% of COFRAC laboratory, specialized in EMC.

NOLATO SILIKONTEKNIK AB (1st participation)

Press Contact: Bei Ding Tel: +4658288927 - Mail: bei.ding@nolato.com

solutions from Nolato! Nolato Silikonteknik is a world leading developer and supplier of material and know-how for EMI shielding solutions made of electrically conductive silicone.

The end products are produced by our own EMC ed EMC production partners

in a number of different countries over the world and tech industries such as telecom, automotive,

Trishield®, Nolato Silikonteknik’s unique dispensing technology, has been widely used for over a decade by the leading players in the telecom industry.

broad range of experience with commonly used processes like wire bond, die attach and flip chip, CSP and standard SMT processes using solder or adhesives as well as very special, partially

d BGA packages for midsized

MSE covers the full range from design support over substrate manufacturing to advanced assembly and packaging out of one hand at the highest quality level. Offering solutions for high frequency

chip modules and reliability substrates and modules in avionic, www.mst.com/msegmbh

Stand G19/F18 �

ELEC is an innovation in NEXIO's uses dedicated to transitional tests

Facing new challenges in technical, productivity and economic sectors, NEXIO has developed BAT-C, the only software which realizes transitional electrical tests compatible with generators of all

5), automotive (ex ISO 16750-2) or aeronautic

formats, the “cut and paste” in the reports and the training on each software and instrument. ELEC, I only have one software to control all my generators, that makes sense”, said a

So much time and security saved! Our skilled and we have the possibility to group our results and generate our tests

e initiated by NEXIO, for almost 20 years and uses by

Stand F24 �

r a decade by the leading players in the telecom industry.

[16]

The latest invented FIP technology Trishield soft®, as the next generation of Trishield®, gives even more benefits and potential for end users in combination with the plastic cover and conductive painting.

Compashield® is our brand name for all the moulded and extruded EMI shielding gaskets in shapes of cans, frames, tubes, sheets and components. This technique involves moulding or extruding conductive silicon rubber into a precise size and shape, it creates a sealed, secured EMI shielding solution, while ensuring that the entire construction is stable and easier to handle.

Our goal at Nolato Silikonteknik is to help our customers in the process to find optimal solutions. To be able to support our customers there are high skilled project managers and field application engineers(FAE) ready for supporting and following the customers from the early conceptual phases.

� OUEST VALORISATION Stand D22 �

Ouest Valorisation – Office of Technology Transfer (OTT) was created in the “Future Investments” project call. It is the relevant office between public research and companies. Its aim: to propose to companies attractive innovation means from the public research.

Ouest Valorisation’s team simplifies the access of the companies to research laboratories in order to develop good collaborative projects or to get access to high professional skills and high level scientifical equipment. Ouest Valorisation’s team detects invention and scientific discoveries and protects them. It chooses projects with good potential and Ouest Valorisation handles the financing of

the technical and economical maturation. The team proposes those projects to companies. Ouest Valorisation acting in the whole process of transfer, participates in the creation of start-up to promote research results from research team or to prepare new markets. During Microwave & RF trade show, you are very welcome on our booth. Ouest Valorisation will introduce innovative technologies especially for network, telecom and broadcast sectors (antennas, OFDM based process, …). We will also focus on

services offered by academic technology platforms (HPC for EM simulations, virtual reality platform, clean rooms, …).

Ouest Valorisation organizes a conference on Thursday (March, 20th) through various testimonies of researchers and companies on their experiences of partnership and technology transfer. � PRESTO ENGINEERING (1st participation) Stand D17 �

Press Contact: Alban Colder Tel +33 2 31 06 27 04 Mail : alban.colder@presto-eng.com

Presto Engineering was created in 2006 (San Jose, CA) and extended to Europe with 2 hubs (Caen and Grenoble, France) by 2009. A fourth hub was created in 2012 in Israel (Migdal Ha'Emek) . Presto Engineering provides engineering services and global industrialization solutions for the microelectronics industry.

We rely on three areas of strong skills to successfully carry out these projects: 1 - Test engineering and Production Testing (RF & Millimetric wave capability up to 86GHz) 2 - Reliability qualification (HTOL, TMCL, HAST, ESD, Latch- Up,...) 3 - Failure analysis (FIB, SEM, X -ray, PEM, LVx)

Partnerships with major assembly OSAT also allows to offer a consistent variety of packaging solutions.

Also, Caen’s hub stands, from Oct.2013, as the only authorized Test Center (ATC) in Europe accredited to deliver HDMI and HDCP certifications. Presto Engineering is an ISO9001:2008 certified company. Caen hub is also accreditated COFRAC ISO17025:2005. We'll extend those certifications towards ISO-TS16949 in 2014.

[17]

� PRINTECH CIRCUIT LABORATORIES (1st participation) Stand H16 � "Flexibility and Beyond!" Printech Helping to Map the Stars

Since the proposal of Lennart Lindergren in 1993 the European Space Agency (ESA) has been working on the Gaia space observation Satellite. Its mission is to compile a 3D catalogue of approximately 1 billion astronomical objects in the Milky Way. Printech Circuit Laboratories Ltd have been assisting E2V of Chelmsford over the past 10 years culminating in the manufacture of the most powerful camera ever to be launched into Space on the Gaia satellite.

E2V have become World leaders in the manufacture of high sensitivity imaging sensors and Printech are the suppliers of specialist flexible circuits that have helped E2V achieve this high accolade. The camera is comprised of a series of charged coupled devices (CCD), which are an advanced version of the chips in digital cameras. Each CCD is 45x59mm and contains 1,996 x 4,500 pixels. Each pixel will detect light which will then be transformed into electronic data. This data will be processed on a supercomputer to generate a 3D map of the Milky Way. The camera is so powerful it can detect a human hair from a distance of a thousand kilometres and it will be able to view stars 400,000 times fainter than the human eye can see.

The key to the success of the E2V proposal was that the design is compressed into a single focal plane that could fit into a Soyuz rocket and not require an Ariane 5. This fitted the budget ESA had in mind and imperative to this are the flexible circuits manufactured by Printech. By selectively ‘bump’ plating the gold fingers on the flexible circuit Printech have enabled E2V to gold wire bond to the end of the gold pad minimising the dead space between devices making it buttable on 4 sides.

The flexible circuits are manufactured under the strict criteria required for any space product with complete traceability and documentation. A clean room was specifically built to provide the correct environment for manufacture. The gold fingers are plated up to between 250 and 300 µm and finally finished with 99.999% pure gold to provide a bondable surface on the cross

section of the fingers. Each of the fingers is individually inspected to ensure that there are no defects in the plating layer that could outgas at a later stage. The CCD array is mounted in a cryogenic chamber with a constant temperature of -120°C to ensure that the flatness of the array is maintained. The flexible circuit takes the signals from the focal plane through to the processing electronics underneath running at temperature of 25°C, so the low thermal conductivity of the flexible circuit material is essential. Gaia was launched on 19th December 2013 on a Soyuz rocket from Kourou French Guiana. For more information: www.rfpcbs.com � STACEM Stand E22 �2

Stacem develops rubber-based compounds to meet a wide range of requirements for the Aerospace, Defence and industrial sectors.

Our extensive manufacturing capability includes compression moulding presses/Injection moulding machines/Flash cut machines/Machining lathes, in addition we have partnerships with competitive subcontractors that allow us to propose a wide range of products with a single point of contact, and also emi gaskets and thermal management.

[18]

The reactivity of our sales department enables us to be close to our customers in order to find the most suitable solution to their needs.

Within the framework of our Quality process, our Quality Control department checks that the parts we manufacture are in accordance with our customers’ requirements. � TEMEX CERAMICS Stand F23 �

E7000 Temex Ceramics, through an ESA program with Thales Alenia Space (Toulouse) and CNES (Toulouse) as partners, becomes the sole European supplier able to supply a high Q factor dielectric material (E7000 with Qxf > 200 000 @ 10 GHz). Such material is required in high-end filters for space applications.

SUBSTRATS FERRITES Increasing demands in design miniaturization of high frequency applications involve the development of planar circuit technology resulting in the need of stripline Y-junction circulators. Temex Ceramics, having high experience in making its own material powders, has developed dedicated materials and processes for microstrip circulators. We then can offer state of the art ferrite substrates for a wide range of low or high power applications (2’’ x 2’’ square / Polished finishing Ra 0.1 µm / Very low losses / High 4πMs / Thin ferrite substrate).

COMPLETE RANGE OF STANDARD PRODUCTS The performance of a microwave filter over temperature is becoming more and more important,

especially for narrow bandwidth high frequency filters. Invar alloy offers very good Coefficient of Thermal Expansion (CTE) and can achieve the desired temperature characteristics. Temex Ceramics offers a complete range of standard products and is particularly able to work on specific request for custom designs with its prototyping dedicated team and R&D equipment. These screws are now “space” qualified as flight model for KA, Ku and Q band

filters. In some cases, the fine pitch resolution has halved the technician tuning time. Invar tuning elements consist of an Invar screw and its brass nut. Screw can be gold plated. We can offer different size, style and types of head (hex, slotted, pan).

NHB capacitor Series Temex-Ceramics Company developed NHB series, a complete range of MLCC based on a NPO dielectric material which provide a very high Self Resonance Frequency at highest working voltage in class - 500V, from 0,3pF up to 100pF. NHB series offers excellent performance for high RF power applications requiring reliable operation in optimized size case geometries. Furthermore, the lowest ESR is obtained with the combination of highly conductive metal electrodes and proprietary new NPO low loss rugged dielectrics. The Ultra-low ESR performance insures that the NHB series products are the best choice for high RF power applications from VLF though microwave frequencies. The typical applications are civilian and military telecommunications such as cellular Base Station Equipment, Broadband Wireless Service, Point to Point/Multipoint Radios, Broadcasting Equipment, and Avionics…

[19]

Conferences Microwave & RF have always been a highlight of the show: Subjects both qualitative and current stakeholder high size, sharing of expertise and know-how adapted at each ... This year, the exhibition offers visitors not less than 11 conference sessions, 43 conferences free access to interact with the best experts and keep abreast of trends most of the emerging industry.

CONFERENCES SCHEDULE

WEDNESDAY 19 MARCH 2014

MATIN APRES MIDI

ROOM 1 ROOM 2 ROOM 3 ROOM 1 ROOM 2 ROOM 3

Micro-Package

EMC CONFERENCES

Innovative materials for microwave

Innovative radar applications

EMC CONFERENCES

Innovative materials for microwave Modelling in EMC

and RF Applications conferences

Electromagnetic environment evolution in medical and telehearth

THURSDAY 20 MACH 2014

MATIN APRES MIDI

ROOM 1 ROOM 2 ROOM 3 ROOM 1 ROOM 2 ROOM 3

ANTENNAS EMC CONFERENCES

MIMO Applications conferences

EMC CONFERENCES

ANTENNAS

New antennas technologies

Human exposure: New

European directive

Digital radio un short range radio system

Innovative Antennas for

transport applications

[20]

[ EMC CONFERENCES ]

Latest technological developments and applications Organized by AFCEM

"Association Française pour la promotion et le développement de la Compatibilité Electromagnétique"

Always very anticipated, the "Special EMC" sessions organised by the AFCEM on 2 full days, will lead the debate on both essential and decisive topics.

WEDNESDAY 19 MARCH � MORNING � ROOM 2 � MODELLING IN EMC AND RF

Session President: Mr. Jérôme MOLLET, CST � 10:00 am to 10:30 am: Comparison of the efficient value of the delay fan-out in a vehicle and a cavity for the wireless communication of the future in the automobile field. Speaker: Mr. Amar BEL HADJ MABROUK, PSA � 10:30 am to 11:00 am: Comparison of Electromagnetic tools, Comparative Evaluation. Speaker: Mr. Jean-Francois LEDENDRE, DGA MI (subject to change) � 11:00 am to 11:30 am: Proposal of a theory for the EMC Speaker: Mr. Olivier MAURICE, Gerac � 11:30 am to 12:00 am: EMC Modelling of systems and power equipments Speaker: Mr. Enrico VIALARDI, Cedrat

WEDNESDAY 19 MARCH � AFTERNOON � ROOM 2 �

ELECTROMAGNETIC ENVIRONMENT EVOLUTION IN MEDICAL AND TELEHEARTH. Session President: Mr Philippe Sissoko - LCIE Bureau Veritas

� 2:00 pm to 2:30 pm: Overview on changes in regulation of medical devices according to Directive 2007/47/EC Speaker: Mr. Patrick TELLIEZ, CEISO. � 2:30 pm to 3:00 pm: Updating EMC requirements of the 4th Edition of IEC 60601-1-2 introducing the concept of medical environment Speaker: Mr. Jean Claude LABOURIE - General Electric Healthcare. � 3:00 pm to 3:30 pm: Security of information system and communication devices in Medical Speaker: Mr. Alain MERLE, CEA LETI. � 3:30 pm to 4:00 pm: Management of the electromagnetic environment of medical devices operating in telehealth and patient monitoring using multiple RF technologies (RFID, Zigbee, Bluetooth, GPRS,..). Speaker: Mr Philippe SISSOKO, LCIE Bureau Veritas. � 4:00 pm: to 4:30 pm: Assessment of exposure against electromagnetic fields of medical devices radiating close the body or implanted. Speaker: Mr. Richard COUSIN, CST.

[21]

[ EMC CONFERENCES ] (suite)

THURSDAY 20 MARCH � MORNING � ROOM 2 � HUMAN EXPOSURE TO 0-300 HZ ELECTROMAGNETIC FIELDS IN PROFESSIONAL

ENVIRONMENTS: THE NEW EUROPEAN DIRECTIVE 2013/35/UE. Session President: Mrs Anne PERRIN, IMEP-LAHC - President of the non-ionising irradiation section

of the Société Française de Radioprotection (SFRP). � 10:00 am to 10:30 am: The foundations of the Directive: from science to regulation for the sanitary safety. Speaker: Mrs Anne PERRIN, IMEP-LAHC. � 10:30 am to 11:00 am: Presentation of the new Directive. Speaker: Mr. Patrick STEABLER, Management consultant for EMC professional risks. � 11:00 am to 11:30 am: Exposure of workers to EBF fields: current practice in an electricity company and developments in the context of the Directive 2013/35/UE. Speaker: Mr. François DESCHAMPS, EDF.

� 11:30 am to 12:00 am: Exposure of workers to EM fields: current practice and perspectives of the Directive 2013/35/UE at a radio broadcasting operator (TDF). Speaker: Mr. Allal OUBEREHIL, TDF.

THURSDAY 20 MARCH � AFTERNOON � ROOM 2 � EMERGENCE OF DIGITAL RADIO (SDR) IN SHORT RANGE RADIO. APPLICATIONS IN

COMPUTING NETWORKS AND M2M Session President: Mr. Philippe MALIET, AEMC.

� 2:00 pm to 2:30 pm: Digital radio in short range radio systems. Speaker: Mr. Philippe MALIET, AEMC.

� 2:30 pm to 3:00 pm: Energy management in wireless sensors networks Speaker: Mr. Olivier BERDER, ENSSAT Lannion

� 3:00 pm to 3:30 pm: How to optimise the radio connections in disrupted M2M environments? Speaker: Mr. Pascal SAGUIN, ADEUNIS RF.

� 3:30 pm to 4:00 pm: The keys for the M2M/IoT environments, with high development potential. Speaker: Mr. Christophe FOURTET, SigFox.

[22]

[ MICRO-PACKAGE CONFERENCE ]

WEDNESDAY 19 MARCH � MORNING � ROOM 1 � MICRO PACKAGE INTEGRATION FOR MICROWAVE AND MILLIMETERWAVE SYSTEM

President of session : M. Yan HAENTJENS - Vectrawave.

� 10:00 am to 10:30 am: Microwave and Millimeterwave Package: requirements and market tendencies Speaker: M. Yan HAENTJENS, VectraWave. � 10:30 am to 11:00 am: System in package for 10 Gbps Optical communication transponder. Speaker: M. Benoît HAENTJENS, VectraWave. � 11:00 am to 11:30 am: Pulsed 10W amplifier in Surface Mount Technology for active antenna. Speaker: M. Yan HAENTJENS, VectraWave. � 11:30 am to 12:00 am: Integrated Transponder for millimeterwave point to point link. Speaker: M. François MAGNE, Bluwan.

[ INNOVATIVE RADAR APPLICATIONS ]

WEDNESDAY 19 MARCH � AFTERNOON � ROOM 1 � MONITORING AND CONTROL IN CIVIL AND INDUSTRIAL SECTORS

President of session: Mr. Philippe LESTER - ESTAR. � 2:00 p.m. to 3:30 p.m. • The principles used radar

• Inventory: parts availability, costs

• Advantages over optical technology, ultra sound ...

• Restriction: use frequency bands

• The sectors potentially interested in this technology market surveillance, automotive, industrial level

measurement example, imaging radar.

[23]

[ NEW MATERIALS ]

On Wednesday 19 March, visitors to Microwave & RF will discover within the 8 conference sessions, a full day focused to the latest innovations in materials for microwave. Details…

WEDNESDAY 19th MARCH � ROOM 3 � INNOVATIVE MATERIALS FOR MICROWAVE

President of session: M. Philippe EUDELINE, Thales Air Systems. MORNING GRAPHENE:

� 10:15 am to 10:45 am: Materials with improved thermal management for packaging applications. Speaker: Mrs Marie-Hélène NOËL, Jacquelot.

� 10:45 am to 11:15 am: Caracterisation and Modelisation of Graphene FET for microwave applications. Speaker: Mrs Audrey MARTIN, X Lim. OTHER INNOVATIVE MATERIALS FOR MICROWAVE

� 11:15 am to 11:45 am: Plastic packages for RF applications. Speaker: Mr. Franck NICHOLLS, Freescale, Semiconducteurs.

� 11:45 am to 12h15 am: Innovative materials for high power microwave components packaging. Speaker: Mr. Georges PEYRESOUBES, Thales Microelectronics. AFTERNOON OTHER INNOVATIVE MATERIALS FOR MICROWAVE (suite) � 2:00 pm to à 2:30 pm: OMMIC processes: ED02AH and GaNSi. Speaker: Mr. Alain JOURIER, OMMIC.

� 2:30 pm to 3:00 pm: High K ceramic for the size reduction of RF filters. Speaker: Mr. Eric RIUS, LABSTIC Brest.

� 3:00 pm 3:30 pm: New materials for Electronic Warfare and High temperature applications. Speaker: Mrs Perrine BERGER, Thales Research Technology.

� 3:30 pm to 4:00 pm: InAlN/GaN HEMT technologies for microwave power and mixed signal applications. Speaker: Mr. Sylvain DELAGE, 3-5 Lab

� 4:00 pm to 4:30 pm: Innovative materials for future microwave applications. Speaker: Mr. Xavier CASTEL, IETR (Institut d'électronique et de télécommunications de Rennes)

� 4:30 pm to 4:45 pm: Conclusions by Mr. Philippe EUDELINE, Thales Air Systems

[24]

[ LIGHTING ON THE ANTENNAS! ]

Microwave & RF 2014 is giving, with no less than 2 specific conference cycles, the opportunity to take on antennas! The objective of these conferences is to take stock of the latest technological advances on the subject.

THURSDAY 20 MARCH 2014 � MORNING � ROOM 1 � NEW ANTENNA TECHNOLOGIES

Session chaired by: Mr Thomas MERLEt, Thales Optronique. � 10:00 to 10:30 am: Development of metamaterial antennas at ISL Speakers: Mr ADAM, Mr MARTINIS, Mr JAECK and Mr BERNARD, Institut Saint Louis.

� 10:30 to 11.00 am: Antennas made from innovative materials Speaker: Mr Jean-Marc RIBERO, LEAT- Nice-Sophia Antipolis University - CNRS.

� 11:00 am to 11:30 am: Plasmonics and Metamaterials for Directive Antennas at Microwave, Terahertz and Infrared Frequencies Speaker: Mr TAHSIN, Akalin - IEMN Lille

THURSDAY 20 MARCH 2014 � AFTERNOON � ROOM 3 � INNOVATIVE ANTENNAS AND INTEGRATION TECHNIQUES

FOR TRANSPORT APPLICATIONS. Session chaired by: Mrs Divitha SEETHARAMDOO, IFSTTAR – LEOST.

The purpose of this session is to present the new antenna solutions available for transport applications and the associated integration techniques and challenges.

� 2:00 to 2:30 pm: Metamaterial antennas available for transport applications. Speaker: Mr de LUSTRAC, IEF (Institut Electronique Fondamentale). � 2:30 to 3:00 pm: Metamaterials in the antenna industry. Upstream research areas. Speaker: Mr. Christian RENARD, Thales Systems Aéroportés. � 3:00 to 3:30 pm: Antenna integration constraints in the automotive industry. Speaker: Mrs LESEIGNEUR, PSA. � 3:30 to 4:00 pm: Modelling of antennas in a complex environment Speaker: Mr Michel NEY, Télécom Bretagne.

[25]

[ MIMO CONFERENCE ]

"Multiple Innovations for Multiple Opportunities", it is one of the favorite themes of Ouest Valorisation, Acceleration Technology Transfer company, whose mission is to provide businesses with attractive resources for innovation from public research.

THURSDAY 20 MARCH 2014 � MORNING � ROOM 3 � MIMO: MULTIPLE INNOVATIONS FOR MULTIPLE OPPORTUNITIES.

Coordinated by: Ouest Valorisation. Ouest Valorisation offers companies multiple technological innovations that have been created in public research laboratories with recognised expertise. This creates plenty of opportunities for their competitiveness. Ouest Valorisation will present its portfolio of innovations in the microwave, transmission and instrumentation fields: � 10:00 am: Introducing Ouest Valorisation � 10h:05 to 10:40 am: Presentation of a specific technology Speakers: Yaakoub TAACHOUCHE, IETR – Rennes Mohamed HIMDI, IETR – Rennes � 10:40 am to 11:15 am: Presentation of a collaboration laboratory / company: IETR (IREENA)/ DEPHASIUM Speaker: Serge PARIENTI, Dephasium � 11:15 am to 11:45am : Présentation of a technology transfer

[26]

[ APPLICATIONS CONFERENCES ]

Animated by the exhibitors, they are the best way to present a new product, a tool, a know-how,

thanks' to short and concrete presentations

WEDNESDAY 19 MARCH 2014 - AFTERNOON

� ROOM 1 �

• 3:30 pm to 4:00 pm: GaN power transistors for radar and avionics applications Animated by: Mr. John WALKER, Integra Technologies / Cobham Microwave • 4:00 pm to 4:30 pm: Power and signal integrity for high speed/mixed signal application. Animated by: M. David PRESTAUX, ANSYS

THUESDAY 20 MARCH 2014 - AFTERNOON

� ROOM 1 � • 2:00 pm to 2:30 pm: High Power loads & resistors for RF & Microwave applications Animated by: M. Christophe PIGAULT et / ou M. Abdelatif EL OUALI, Diconex • 2:30 pm to 3:30 pm: Conducted Immunity Standard Uptades and implementation in the new IMU3000 generator Animated by: M. Nicholas WRIGHT, EMC Partner • 3:30 pm to 4:00 pm: Electromagnetic Simulation new features for RF and microwave components to system design. Animated by: M. David PRESTAUX, ANSYS • 4:00 pm to 4:00 pm : Trends for RF and Microwave Test Animated by: M. Richard KEROMEN - National Instruments

[27]

MEETING POINT FOR RADIO HAMS

[ Stand G11 ]

REF radio hams have their own "meeting point" on the Microwave & RF show

The French network for Radio transmitters (REF-Union), is an association founded in 1925, a state-approved body, the French wing of the French International Union of Radio Hams (I.A.R.U), approved by the Ministry of defence and national education. Various events which may interest radio hams will be presented including the new links recently made with the ISS space station and educational establishments.

RECRUITMENT SPACE

[ Stand C20 ]

Employment is a major issue in times of recession and the electronics sector in particular is in need of specialised skills and profiles. This space is designed to be an area where exhibitors who are looking to recruit and visitors who wish to drop off their CV can meet.

15 rue de l'Abbé Grégoire

• General Organizer: Direct line: Email:

� PRESS RELATIONS

• Manager: Tel: Email:

www.microwave

NOTE

[28]

[ CONTACTS ]

� ORGANISER

Groupe Solutions 15 rue de l'Abbé Grégoire - 75006 Paris

General Organizer: Sylvie Cohen +33 (0) 1 44 39 85 16

s.cohen@infoexpo.fr

PRESS RELATIONS C&REY COMMUNICATION

Colette Rey+33 (0) 9 51 70 20 57

colette.rey@c-reycom.com

WEB SITE:

www.microwave-rf.com

NOTE YOUR NEXT RENDEZ VOUS

Sylvie Cohen +33 (0) 1 44 39 85 16

s.cohen@infoexpo.fr

C&REY COMMUNICATION

Colette Rey +33 (0) 9 51 70 20 57

reycom.com