Workflow Integration

Humanized Technology

DiagnosticExcellenceCAD/CAM Clinical Case: Inlay

using the CS 3600 intraoral scanner and CS 3000 mill

Public. © Carestream Health, 2016

CAD/CAM Clinical Case: Inlay

• Patient presented with substantial decay on tooth #35.• A ceramic composite inlay was purposed.• The preparation for the inlay was completed; a temporary restoration was

completed.• GC Cerasmart material (composite hybrid) was chosen for the inlay and

bonded with G Cem.• Adaptation and results were very good.

Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

CAD/CAM Clinical Case: InlayInitial panoramic image

Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

CAD/CAM Clinical Case: InlayTooth prepared, scanned and temporary placed

Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

CAD/CAM Clinical Case: Plan in CS RestorePreparation selection

Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

CAD/CAM Clinical Case: Plan in CS Restore Restoration adjusted

Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

CAD/CAM Clinical Case: Plan in CS RestoreOcclusion checked

Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

CAD/CAM Clinical Case: Mill with the CS 3000GC Cerasmart material (composite hybrid)

Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

CAD/CAM Clinical Case: Inlay PlacedFinal resuts

Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

Workflow Integration

Humanized Technology

DiagnosticExcellence

For more information or to contact a Carestream Dental representative,call 800.944.6365 or visit www.carestreamdental.com.

Public. © Carestream Health, 2016