Drag in Fore Body Wake

8/2/2019 Drag in Fore Body Wake

1/25

UNCLASSIFIED

AD NUMBERAD272766

NEW LIMITATION CHANGETOApproved for public release, distributionunlimited

FROMDistribution authorized to U.S. Gov't.agencies and their contractors;Administrative/Operational Use; Dec 1961.Other requests shall be referred toAeronautical Systems Div.,Wright-Patterson AFB, OH 45433.

AUTHORITYAFFDL ltr, 19 Mar 1969


2/25

UNCLASSI FIED

AD72 766Ab. SERVICES TECHNICAL INFORMATION AGENCT

ARLINGTON HALL STATIONARLINGTON 12, VIFIGINIA

UNCLASSc.IFIED


3/25

NOTICE: When government or other drawings, speci-fications or other data are used for any purposeother than in connection with a definitely relatedgovernment procurement operation, the U. S.Government thereby incurs no responsibility, nor anyobligation whatsoever; and the fact that the Govern-ment may have formlated, furnished, or in any waysupplied the said drawings, specificationsp or otherdata is not to be regarded by implication or other-wise as in aiy manner licensing the holder or anyother person or corporation, or conveying any rightsor perzissiLn to manufacture, use or sell anypatented invention that may in any way be relatedthereto.


4/25

-' ASD TECHNICAL REPORT 61-587

q The Drag of Cones, Plates, and HemispheresIin the Wake of a Forebody in Subsonic FlowHELMUT G. HEINRICHAND-___,l EUGENE L. HAAK

- DEPARTMENT OF AERONAUTICS AND ENGINEERING MECHANICSUNIVERSITY OF MINNESOTA

C .

DECEMBER 1961 P

This report is not to be announced or distributedautomatically in accordance with AFR 205-43A, Paragraph 6d.

AERONAUTICAL SYSTEMS DIVISION


5/25

NOTICES

When Government drawings, specifications, or c.her data are used for any purposeother than in connection with a definitely related Government procurement operation, theUnited States Government thereby incurs no responsibility nor any obligation whatsoever;and the fact that the Government may have formulated, furnished, or in any way suppliedthe saia dlrawings, specifications, or other data, is not to be regarded by implication orotherwise am in any manner licenuing the holder or any other person or corporation, orconveying any rights or permission to manufacture. use, or sell any patented inventionthat may in any wey be relatod thereto.

ASTIA release to OTS not authorized.

Qualified requesters may obtain copies of this report from the Armed Services Tech-nical Information Agency, (ASTIA), Arlington Kali itation, Arlington 12, Virginia.

Copies of AS D Technical Reports and Technical Notes should not be returned to theAeronautical Systems Divisio, unless return is required by security considerations, con-tractual obligations, or notice on a specific document.


6/25

ASD TECHNICAL REPORT 61-587

The Drag of Cones, Plates, and Hemispheresin the Wake of a Forebody in Subsonic Flow

Helmut G. HeinrichandEugene L. Haak

Department of Aeronautics and Engineering MechanicsUniversity of Minnesota

December 1961

Flight Accessoriea LaboratcoryContract No. AF 33(616)-8310Project 6065Task 60252

Aeronautical Systems DivisionAir Force Systems CommandUnited Sta:es Air Force

Wright-Patterson Air Force Base, Ohio

100 - February 1962 - 21-890


7/25

FOREWORD

This report was prepared by the Department of Aeronauticsand Engineering Mechanics of the University of Minnesota incompliance with Air Force Contract No. 33(616)-8310.

The work being ac:omplished under this contract is spon-sored jointly by QM Research and Engineering Command, Depart-ment of the Army; Bureau of Naval Weapons, Department of theNavy; and Air Force Systems Command, Department of the AirForce; and is directed by a Tri-Service Steering Committeeconcerned with Aerodynamic Retardation. Contract administra-tion is conducted by the Aeronautical Systems Division andMr. Rudi J. Berndt of the Aerodynamic Decelerator Branch,Flight Accessories Laboratory, Aeronautical Systems Division,is Project Engineer.

This project was carried out in cooperation with Mr.Ronald J. Niccum, B.S.Ae., and several graduate and under-graduate students, and the authors wish to express theirappreciation to them.

ASD TR 61-587 ii


8/25

ABSTRACT

The drag of a number of bodies having some resemblenceto aerodynamic deceleration devices was measured in freestream and in the wake of an ogival cylinder. The diameterratio of the wake producing body and the deceleration devicesas well as the distance between the two bodies was varied.

With the exception of the sphere, the drag of the decel-eraton, evlc located in the wake is less than its freestream drag.

PUBLICATION REVIEWThis report has been reviewed and is approved.

FOR THE COMMANDER:

Chief, Retardation and Recovery BranchFlight Accessories Laboratory

ASD TR 61-587 ii1


9/25

TABLE OF CONTENTS

SectionI. Introduction ............ . . . .1II. Models and Test Arrangement ........... . . 2III. Results ... .. ... . . . . .. 5

References . . . . . . . . . . . . . . . . . 14

ASD TR 61-587 iv


10/25

LIST OF ILLUSTRATIONS

Figure No Pg1. Primary Body . . . . . . . . . . . . . . . . . 32. Secondary Bodies..... . . . . . . . . . 33. Test Arrangement . . . . . . . . . . ........... . .. . 1414. Strain Gage Force Sensing Element . . . . . . . 145. Experimental Pressure Distribution in theWake of a Body of Revolution (CD = 0.35) ..... 66. Variation of Drag Efficiency, C /CD, , IWith

LDpfor a Flat Plate . . . . . . . . . . . . . . . 77. Variation of Drag Efficiency, C /CDco , with

L/DP for a Truncated Cone . .................... . . 78. Variation of Drag Efficiency, C /CDo with

L/t1) for a 450 Cone . . . . a . . . . # a . a . 99. Variation of Drag Efficiency, C /CDc , withL/D for a 300 Cone . . . . . . . . . . . . . . . 910. Variation of Drag Efficiency, CD/CDc , withL/Dpfor aHemisphere . . . .. . 0 1011. Variation of Drag Efficioncy, CD/CDco. with

L/D fora Sphere . . . ........................... 11

LIST OF TABLESTable No. Page1. Drag Efficiencies, CD/CDo , for FiveBasic Retardation Devices in the Wakeof a Forebody. ............ .. .. . . . .13

ASD TR 61-587 v


11/25

LIST OF SYMBOLS

C = Drag coefficient of an object located in thewake of a forebodyCDoc = Drag coefficient of an object located in

free streamCD/CD = Drag efficiencyC = AP/q = pressure coefficientD = Diameter of ogival cylinderDp = Diameter of primaryDs = Diameter of secondaryL = Distance from rear point of primary body

to front point of secondary bodyM = Mach numberAP = Difference between wake total and

free stream static pressuresq = Free stream dynamic pressureRe = Reynolds number based on D. and Vr = Radius of wakeV = Free stream velocityX = Distance downstream from base of o'ival cylinder

ASD TR 61-587 vi


12/25

SECTION IINTRODUCTION

Intuitively it can be assumed that in general the dragof an object, called secondary body, located in the wake ofanother object, called primary or forebody, will be less thanthe drag of the same object in undisturbed flow. This pheno-menon is important for problems of aerodynamic deceleration,and it is the objective of this study to establish experimentallythe ratio between the free stream and the wake drag of a numberof bodies as a function of their location, with the diameterratio between primary and secondary body as parameter.

The pressure distribution in the wake of the primarybody has been measured and is presented in Fig 5. This problemhas been treated more extensively in Refs 1 and 2.

Manuscript released by the authors in October 1961 forpublication as an ASD Technical Report.

ASD TR 61-587 1


13/25

SECTION IIMODELS AND TEST ARRANGEMENT

The forebody used in this study is a cylinder with a2.5 caliber tangent ogival nose and blunt tail. The overallfineness ratio of this body is 4.5 (Fig 1).

The related secondary bodies are a hollow hemisphere,a sphere, a flat plate, a 45 cone , a 300 cone, and a truncated45 cone (Fig 2). The diameter of the projected area of allsecondary models was five inches.

The drag relationships were investigated for diameterratios of the primary to secondary bodies of 1:1, 1:2, and1:3, respectively. Since several different secondary bodiesbut only one primary body were involved, three primary bodieshaving diameters of D = 1.67, 2.5, and 5 inches were fabricatedand used to obtain the desired diameter ratios.

This procedure had the advantage that in the courseof the experiments the drag to be measured for each individualsecondary body varied over a relatively small range.

The general test arrangement is shown in Fig 3. Thesupporting strut of the secondary body contains a strain gageforce sensing element shown in Fig 4. This element in connec-tion with an oscillograph was used to record the drag of thesecondary body. The strain gage drag recording was chosenbecause the available mechanical balance was unsatisfactorywhen the models had a tendency to vibrate; this was particularlynoticeable when aerodynamically unstable objects were suspended.

The free stream drag of the secondary bodies was mea-sured in the same manner except that the forebody was removed.The drag coefficient of the secondary body was in all casesrelated to its projected area and the dynamic pressure of theundisturbed flow.

The wind tunnel used for these experiments was ahorizontal, return flow type with test section dimensions of38 x 54 inches. The Reynolds number of the experimentsrelated to the diameter of the secondary body was approxi-mately 5.2 x 105 at a Mach number of 0.2.

In order to eliminate the influence of the stingmount and supporting strut, so-called tare and interferencemeasurements were made (Ref 3), and the values shown inFigs 6 through 11 are corrected for these effects and repre-sent aerodynamic data related to the objects in free flight.The drag coefficient of the ogive cylinder was determined bymeasuring the change of momentum of the undisturbed flow(Ref 5).

2


14/25

L LD

R\A L/D = 4.5R/D = 25

FIG 1. PRIMARY BODY

5.0" 5.0. 5.0"

20 GAUGE 1/8"HOLLOW HEMISPHERE SPHERE FLAT PLATEK2.6 [-4.,33" j450450- 756450 CONE 300 CONE TRUNCATED CONE

FIG 2. SECONDARY BODIES3


15/25

58.0"

OF TEST SECTIONSECONDARY

PRIMARY BODY BODIESL oSECONCRY

_____ __ - __T STING

38.0!PRIMARYBODY STRAIN GAGESUPPORT FORCE SENSING

ELEMENT-*,SUPPORTBASE

FIG 3. TEST ARRANGEMENT:-1/2" DIA. HOLlOW-

VSI STINGTsee STRAIN GAGESdetail (4 TOTAL) SQ. CROSS18 716 5 36" SECTION-11 0406 x 0.40(!"1/2IA. STEEL

I RODLEAD--,FILLED ,/ 070I\ I t .12

STREAMLINED - DETAIL=C -,HOLLOW STRUT

FIG 4. STRAIN GAGE FORCE SENSINGELEMENT

4


16/25

SECTION IIIRE ULTS

The results of the measurements are shown in Figs 6through 11 and in Table I. In general, it can be seen that thedrag of the secondary body increases with both distance behindthe forebody and decreasing forebody diameter. The drag inthe wake also approaches the free stream drag at certain dis-tances downstream from the forebody. An exception to thisrule can only be found in the configuration where a sphere isused a. secondary body, and this case will be discussedseparutuly.

Figure 5 shows the pressure distribution in the wakeof the ogive cylinder. It is known that the analysis of theturbulent wake poses certain difficulties and all solutionsrelated to this problem include an emperical factor which isin someway related to Prandtl's "mixing length." Placing nowa secondary body in the wake alters, of course, the pressuredistribution in the wake ahead of and behind the secondarybody, and one obtains a wake problem which is much more complex.

The drag coefficient of the secondary body located atany distance behind the forebody could be determined bymeasuring the loss of momentum of the flow caused by thesecondary body. Unfortunately, an experimental survey of thewake of a combination of bodies is not available at this time,and for an analytical treatment of a wake of this type such asurvey may be necessary.

In view of the complexity of the problem of the dragof a body immersed in the turbulent wake of a forebody, itappears that the length to diameter ratio of the secondarybody and the eventual existance of a strong variation of itsdrag coefficient with Reynolds number are significant character-istics in the arrangement of the experimental restIutf.. 2hec'-fore, the discussion of the results may begin with the reviewof the measurements of the secondary bodies with minimum length,namely, the flab circular plate and the truncated cone (Figs6 and 7).

The results of the measurements on the flat plate andthe truncated cone show results with tendencies one intuitivelywould expect.

The next group, the 450 and 300 cones, are characterizedby a length of 0.5 to 0.866 base diameters. These bodies arenot as blunt as the preceding two, and in fact the 300 conemay already be considered as somewhat streamlined. Therefore,the wake which they produce as well as their influence uponthe wake profile between the primary and secondary body will

5


17/25

co_

D

IL

c'J~ ~ 0C

zC 0CJP

LI LLY) C jr-0 C~j(Y)>M r0

6j


18/25

C."L)

0x4-C14-~ C--

-00

* ~~~ L) Z)(No~~C ".0 It- 0 0 0 0 0 0 0 0

LL

H - --~~L CO C0 0

7Nc


19/25

be considerably different than the effects developed by theblunter bodies.Reviewing Figs 8 and 9 one observes that the shortercone has drag characteristics somewhat similar to the precedingtwo bodies while the longer cone deviates from the relatively

simple pattern of its predecessors.The 300 cone has been measured three times and theexperimental results may be considered as reasonably accurate.The quantitative analysis of these data will be subject to aseparate Investigation.The results of the measurements encompassing thehollow hemisphere are shown in Fig 10. This body developsa strong individual wake and causes a noticeable pressure

rise upstream of its frontal area. Otherwise the hollowhemisphere is a body with a length to diameter ratio of 0.5as is the 450 cone , and its drag characteristic is somewhatsimilar to that of the 450 cone except that the drag of thehemisphere in the wake is generally higher. A very particulareffect can also be observed for the hemisphere having a dia-meter ratio of 2. The elevated drag level and the inconsis-tency in regard to the relative sizes can probably be attri-buted to the interaction of the two wakes and the effect ofthe upstream stagnation of the hollow hemisphere.

The drag of the sphere as secondary body is presentedin Fig 11. It can be seen that its free stream drag is alwayssmaller than the drag in the wake. The free stream dragcoefficient of the sphere was measured to be CD = 0.105 ata Reynolds number of 5.2 x l05 which would indicate that theflow around the sphere was supercritical. However, when thissphere is placed in the wake, the local velocity, and thusthe local Reynolds number are considerably reduced and theflow may become subcritical.Considering the velocity conditions in the wake, aprobable drag ratio CD/CD, versus L/D for the sphere wasobtained in the following manner. By Esing the velocity onthe centerline in the wake of the primary body as shown inFig 5 and assuming this to be the velocity the sphere exper-iences at that particular point in the wake, a Reynolds numberwas calculated for each position. Then, from a CD versus Rerelationship for a moving sphere in resting air, as shown inRef 4, a drag ratio CD/C D was calculated for each point.This method also yielued Trag ratios higher than unity as

illustrated in Fig 11. Therefore, the fact that in this modelconfiguration, CD/CD. is greater than unity appears to beexplainable as a Reynolds number dependency.The measurements encompassing the sphere were very

difficult to perform; in particular, the repeatability wasnot good. This is probably a consequence of the very sensitive

8


20/25

~C- c\o(II II O~1CDII NC)Ix C'CL0

C)0/a d)0 0 0

'-2oCoco/ a

- (w

-0)0 0 00 0 0 0 0

9 O~ L - ~) ( ' 0od d 6o s ~ C0'03/63

CV


21/25

0,90u's 00,70

8 0.600.5"~ 0,50"

0.400.30 0 D,/D,, 10.20 x ,0.100.00 i0 3 6 9 12 15 18 21 24

L/DpFIG 10. VARIATION OF DRAG EFFICIENCY,Co/Cs,,WITH L/Dp FOR A HEMISPHERE

Re=5.2x10 5 M 0 ,.2, Coo=1.52

10


22/25

1.801,70 I1.60 -' - ,- *1.60 CALCULATED CURVE1.50 xC~ x D/D 2

1.40

1.30 - -- -1.201.10 --

81.00 ---% .9 0

0.800.700.600,50o~o L"-F0.300.200.10 I0.00 0 3 6 9 12 15 18 21 24

L/DpFIG 11 . VARIATION OF DRAG EFFICIENCY,CD/C 9 a,WITH L/Dp FOR A SPHERE

Re=5.2 x105 , M=0.2, CDo=0.10511


23/25

nature of the flow pattern of a sphere near its criticalReynolds number. Since it was felt that a detailed and specialstudy of this Reynolds number effect would be required, event-ually in connection with a wake survey of a combination ofbodies, further measurements involving a sphere were abandoned.

In most experiments discussed above and especially inthe tests involving the blunt bodies, such as the flat plateand the hollow hemisphere, considerable vibration of thesecondary body was encountered. This made the drag measure-ments rather difficult. From the dispersion of the recordeddata a possible error in the order of + 3 per cent may beexpected in the presented results. The magnitude of the data,however, is considered reliable, particularly, the tendenciesof decreasing influence of the forebody with increasing dis-tance and size of the secondary body.

The presented data are merely experimental, but theyindicate the existance of very complicated interactions, anda further exploration of the wake problem of a combination oftwo bodies appears to be very desirable.

12


24/25

MODELSHEMISPHERE FLAT PLATE 450 CONE 300 CONE TRUNCATEDDS L CONE

CC-am 1.520 C.. 1.125 C.= 0.720 Co.. 0.583 C..F 0.8231 0.300 o.471 o.622 0.841 0.6 942 o.639 O.640 0.755 0.820 0.7603 0.738 0.725 0.790 0.791 0.7954 0.798 0.780 0.811 0.821 0.8155 0.800 0.840 0.852 0.8312 0.7584 0.917 0.875 0.826 0.755 0.8296 0.861

2 8 0.907 o.876 o.841 0.769 0.88310 0.87012 o.942 o. 64 0.825 0.85016 1.000 o.887 0.842 o.8813 0.9506 0.931 0.957 0.889 0.798 o.8859 0.9503 12 0.934 0.963 0.890 0.805 0.91615 2618 0.949 0.900 0.834 0.90224 1.000 0.907 o.841 0.925

TABLE 1. DRAG EFFICIENCIES, CD/CD 0 FOR FIVEBASIC RETARDATION DEVICES IN THE WAKEOF A FOREBODY. M=0,213


25/25

REFERENCES

1. Heinrich, H. G. and Riabokin, T.: Analytical andExperimental Considerations of the VelocityDistributions in the 'ake of a Body of Revolution,WADC TR 60-257, December, 1959.

2. Rubbert, P.E.: Investigation of the VelocityDistribution in the Wake of an Axially SymmetricBody, Master's Thesis submitted to the GraduateSchool of the University of Minnesota, July,1960.

3. Pope, Alan: Wind Tunnel Testing, John Wiley andSons, New York, 1954, pp. 156-159.

4. Hoerner, Sighard F: Aerodynamic Drag, (Publishedby author), 1958, p. -5. Schlichting, H.: Boundary Layer Theory, McGraw-Hill,New York, 1955, pp. 615-625.

14

Date post:	05-Apr-2018
Category:	Documents
Upload:	rstilzscribd
View:	228 times
Download:	0 times

Drag in Fore Body Wake

Documents