Drain Wardenwith Gutter Guard

INSTALLATION INSTRUCTIONS

Envirosmart Industrial Pty Ltd9 Unley Street, Brendale QLD 4500. AustraliaTel: +61 7 3889 6677 Fax: +61 7 3889 6057

2. Fill the Drain Guard Sock sewn onto the SpillSmart Drain Filter with material such as sand or gravel and cable tie each end.

3. Clean debris around the stormwater drain opening and once opened or removed, clean inside the drain pit to avoid damage and impeded filter performance .

1. Place safety bollards / safety cones on the road to create a safe work place prior to installation.

5. Attach the white Bilge sock to the Drain grill so it becomes suspended into the filter basin to absorb any hydrocarbons and oils entering the drain inlet.

4. Insert the SpillSmart Drain filter in the drain pit ensuring the Gutter Guard runs in front of the drain curb opening snuggly. This will act as a barrier to the entry point of the drain. Water flow will be directed into the drain and filter thorough the Drain Warden.

Envirosmart Industrial Pty Ltd9 Unley Street, Brendale QLD 4500. AustraliaTel: +61 7 3889 6677 Fax: +61 7 3889 6057

Envirosmart Industrial Pty Ltd9 Unley Street, Brendale QLD 4500. AustraliaTel: +61 7 3889 6677 Fax: +61 7 3889 6057

7. Trim the excess skirt filter fabric flush with the grate to avoid creating a tripping hazard.

6. Attach the Velcro tabs to the grate to provide extra support and ease for cleaning and maintenance, then replace the grate.

1. SpillSmart Drain Warden with Gutter Guard is recommended to be inspected after major storm events that result in high water discharge. During inspection remove silt and debris captured in the filter and clear and other debris from around the external drain opening.

Disposal – Allow the filter to drain or lightly squeeze before disposal. The SpillSmart Drain Warden with Gutter Guard and bilge sock can be disposed in most cases in general waste, however always check and comply with Government regulations.

2. Replace the SpillSmart Drain Warden with Gutter Guard on a routine basis.

Maintenance

Correctly installed Drain Warden with Gutter Guard