| Garden + Terrace | Drainage
www.soba-inter.com
Drainage systems
Advantages of Soba drainage systems
Various widths and heights of lower gutter sections are available and can be combined with various covers
Fine lateral perforation delivers uniform drainage flow Appropriate drainage ducts can be supplied Short delivery lead time (available ex stock) Site-specific custom manufacture available at short notice Long service life Material thicknesses:
– Grilles up to 1.50 mm – Lower sections 1.00 mm – Other material thicknesses on request
Universal flat-roof guttersand inspection ducts
Soba drainage gutters Standard length: 2000 mmStandard widths: 80 and 125 mmStandard heights: 40 and 60 mm
Custom-made solutions may be requested atPhone +41 56 483 35 20 or at [email protected]
The universal Soba flat-roof gutters and inspection ducts are well-suited for pedestrian areas on terraces, roof plantings and other applications.
2 | Soba Inter Drainage
Garden + Terrace
Universal flat-roof guttersand inspection ducts
Grille gutter
Perforated grille gutter
Grating gutter
Slotted grille gutter
Soba Inter Drainage | 3
Lower section of gutter with angled end
Perforated grille
Supporting frame
Base frame
Duct complete
Drainage element
Drainage shaft
Slotted grille
Supporting frame
Base frame
Stacking frame
Base frame
4 | Soba Inter Drainage
Maximum individuality in material and design!
Perfectly designed gutters and profile sections for your building project
Garden + Terrace
Soba Inter Drainage | 5
The possibilities for individual customer wishes are endless.
An individual sample or logo – practically any design can be produced to suit individual needs. This allows for a maximum range of individuality.
Unique design Site-specific custom manufacture is possible Increases the value of the property
Advantages of the Soba angles for gravel and grit
Quick installation Available in various materials and sizes Short delivery lead time Good price-performance ratio Great versatility
Angles for gravel and grit, length 3000 mm
Designation Dimensions
Copper 1.50 mm 40 / 60 mm
Aluminum 2.00 mm 40 / 60 mm
Aluminum 2.00 mm 40 / 100 mm
Stainless steel 1.25 mm 40 / 60 mm
Stainless steel 1.25 mm 40 / 100 mm
Brackets for gravel and grit
Designation Dimensions
Copper 0.80 mm 40 / 60 mm
Aluminum 1.00 mm 40 / 60 mm
Aluminum 1.00 mm 40 / 100 mm
Stainless steel 0.60 mm 40 / 60 mm
Stainless steel 0.60 mm 40 / 100 mm
The new gravel angles delights with its visually appealing design. With its fine slotted holes, it can be used with gravel as well as with stone chippings. Assembly is quick and easy, using a bracket that can be bonded to the polymer sealant strip with an adhesive. The seal is neither perforated nor do the brackets have to be recessed.
Soba angles for gravel and grit
6 | Soba Inter Drainage
Garden + Terrace
Advantages of the Soba joint profiles
Render stays dry in the joint area Joint remains free of weeds Conceals drainage and protected areas with a border Facilitates a clean connection to facades Simple and quick to install
Material
Designation
Stainless steel 0.80 mm
Standard sizes
Dimensions
L x W x H: 2000 x 18 x 30 mm
L x W x H: 2000 x 18 x 40 mm
Walkways may not be laid flush to the facade (as defined in SIA 271). With its unique joint profile, Soba Inter AG offers a visually clean solution for such connections. The Soba joint profile facilitates the escape of humidity from gaps between walkway slabs and facade connections and greatly reduces the likelihood of any weed growth. Furthermore, the bordered drainage and protection layers may be covered discretely and effectively.
Soba joint profile
Soba Inter Drainage | 7
A Schoop Group company.
Soba Inter AGGarden + TerraceIm Grund 15CH-5405 Baden-DättwilPhone +41 56 483 35 20Fax +41 56 483 35 [email protected]