32
PORCELAIN TILE DRAKKAR
PORCELAIN TILEDRAKKAR
INDEXmoodboard .02color palette .03colors & sizes .22field tile application areas .26tile performance data . 27
Drakkar collection is designed in Italy and manufactured in USA
Photographed samples are intended to give an approximate idea of the product. Colors and textures shown are not binding and may vary from actual products.
Samples can be ordered from Mirage U.S.A. website: www.mirageusa.net/samples
conceptThe “rough”, lived-in texture of Drakkar reproduces an imperfect surface that
combines nature with the passing of time, to create a truly authentic balance.
The collection is made up of various types of wood planks, each with their own history, past
and, above all, personal aesthetic qualities.
It thus comes in a range of bold yet well-balanced colors, which make this collection both
classic and contemporary, something which becomes even more apparent in proportion to
the space in which it is used.
The grouting and scratches create a new aesthetic code that highlights any blemishes and “unfinished” parts, transforming them into
new elements of artistic expression and even decorations in some cases.
the COLLECTION
DRAKKARPORCELAIN TILE
MOODBOARDinspired by
2 |
COLOR
Three colors that represent three different moods. The warmth of the natural wooden color contrasts with the modern feel of the cold version in shades of grey, although both are able to create a cosy, warm living space.
In addition, the darker tones in shades of blacks, browns and greys, fully allow time to tell its own history with marks and stains, and thousand shades that make upthis product.
palette
south DK01
pole DK03
north DK02
Photographed samples are intended to give an approximate idea of the product. Colors and textures shown are not binding and may vary from actual products.
| 3
4 |
FLOOR: north DK02 Chevron 8”x40” NATWALL & TOP: bianco lunensis JW12 48”x96” LUC
north | 5
6 |
south
FLOOR: south DK01 8”x40” NATWALL: south DK01 8”x40” NAT
| 7
southFLOOR: south DK01 8”x40” NATWALL: south DK01 8”x40” NAT
8 |
| 9
10 |
south
FLOOR: south DK01 8”x40” NATWALL: calacatta reale JW02 12”x24” LUC
south DK01 mosaic 36T 12”x12” NATsouth DK01 8”x40” NAT
| 11
12 |
southFLOOR: south DK01 8”x40” NAT
WALL: calacatta reale JW02 12”x24” LUCsouth DK01 mosaic 36T 12”x12” NAT
south DK01 8”x40” NAT
| 13
14 |
hank
FLOOR: hank 24”x24” NAT
| 15
hankFLOOR: hank 24”x24” NAT
16 |16 |
| 17
18 |
pole
FLOOR: pole DK03 8”x40” NATWALL: popWhite PJ20 6”x12” LUC
| 19
pole20 |
FLOOR: pole DK03 8”x40” NATWALL: popWhite PJ20 6”x12” LUC
Comfortable tones, a pleasant style for modern settings
| 21
COLORS & SIZES
8”x40” NAT /
south DK01
FinishesNAT: natural
Note: Mirage recommends a minimum 2mm grout joint for all rectified products and a minimum 3mm grout joint for not rectified products
NOT RECTIFIED
NOT RECTIFIEDChevron 8”x40” NAT /
SUBSTANTIALVARIATION
V4
22 |
8”x40” NAT /
north DK02
FinishesNAT: natural
Note: Mirage recommends a minimum 2mm grout joint for all rectified products and a minimum 3mm grout joint for not rectified products
SUBSTANTIALVARIATION
V4
NOT RECTIFIED
NOT RECTIFIEDChevron 8”x40” NAT /
| 23
pole DK03
FinishesNAT: natural
Note: Mirage recommends a minimum 2mm grout joint for all rectified products and a minimum 3mm grout joint for not rectified products
8”x40” NAT / NOT RECTIFIED
SUBSTANTIALVARIATION
V4
NOT RECTIFIEDChevron 8”x40” NAT /
24 |
MOSAICS
DK01 Mosaico 36 T12”x12” NAT
DK03 Mosaico 36 T12”x12” NAT
DK02 Mosaico 36 T12”x12” NAT
2”x2” 2”x2”2”x2”
Note: all mosaics can be used for wet areas
Hank 40”x40” NAT / Match 12”x24” NAT / NOT RECTIFIEDRECTIFIED
| 25
SIZES, FINISHES and PACKAGING
8”x40” Chevron 8”x40” 12”x24” 24”x24”
SIZES (NOMINAL)
THICKNESS 9 mm 9 mm 9 mm 9 mm
SURFACE NAT NOT RECTIFIED NAT NOT RECTIFIED NAT NOT RECTIFIED NAT RECTIFIED
south DK01 A AA A
north DK02 A A
pole DK03 A A - -
Gross weight per Ctn (lbs) 54,23 52,91 57,72 54,96
Pcs / Ctn 6 6 7 3
Sf / Ctn 13,337 10,33 14,015 11,625
Ctn / Pallet 36 30 40 40
Sf / Pallet 480,132 309,90 560,60 465,00
A: Available
FIELD TILE - SIZES AND FINISHES
NOMINAL (in) ACTUAL (in) THICKNESS (mm) FINISH RECTIFIEDMINIMUMGROUT JOINT (mm)
8”x40” 7,87”x39,37” 9 NAT NO 3
Chevron 8”x40” 7,87”x39,37” 9 NAT NO 3
12”x24” 11,81”x23,62” 9 NAT NO 3
24”x24” 23,62”x23,62” 9 NAT YES 2
Mosaico 36 T*12”x12”
Bullnose**21/2”x40”
Cove Base6”x12”
MOSAICS COORDINATING TRIM
SURFACE NAT NAT NAT
south DK01 A A A
north DK02 A A A
pole DK03 A A A
Pcs / Ctn 10 10 20
* Mesh mounted ** One-round edge shaping A: Available
2”x2”
26 |
TECHNICAL CHARACTERISTICS ASTM STANDARDS ASTM TEST RESULT ASTM TEST METHODS
WATER ABSORPTION < 0.50% < 0.50% C373
FROST RESISTANCE As Reported Resistant C1026
BREAKING STRENGHTS >250 lbf. >400 lbf. C648
FACIAL DIMENSIONS RANGE -3.0%<nominal<3.0% Within Standard C499
RANGE OF THICKNESS (nominal) <0.04 IN (1.02 mm max) Within Standard C499
WEDGING +/-0.50% OR +/- 2.0MM Within Standard C502
WARPAGE +/-0.75% OR +/- 2.3MM Within Standard C485
CHEMICAL RESISTANCE As Reported Unaffected C650
STAIN RESISTANCE As Reported Unaffected C1378
SCRATCH HARDNESS — 6 —
DRY/WET COEFFICIENT OF FRICTION As Reported >0.60 C1028
DYNAMIC COEFFICIENT OF FRICTION D.C.O.F. > 0,42 >0.42 —
FIELD TILE APPLICATION AREAS
FINISH INTERIOR FLOORS (DRY)
INTERIOR WALLS
PAVING EXTERIORWALLS
RESIDENTIAL NAT NAT — NAT
LIGHT COMMERCIAL NAT NAT — NAT
HEAVY COMMERCIAL NAT NAT — NAT
SHADE and TEXTURE INDEXV1 V2 V3 V4
UNIFORM APPEARANCE SLIGHT VARIATION MODERATE VARIATION SUBSTANTIAL VARIATION
Minimal differences among tiles from the same production
Slight variation concerning texture and/or pattern
Colors or texture may vary significantly from tile to tile
Substantial variation in terms of colours and/or pattern from tile to tile
RECOMMENDED USEDrakkar is recommended for interior walls and floors and external walls, both in commercial and residential applications. Drakkar is not recommended for exterior paving. If offset pattern is required for tiles 18” or longer, Mirage® recommends an offset of not greater than 30%. See www.mirageusa.net for further installation instructions.
TILE PERFORMANCE DATACLASSIFICATION COMPLYING WITH ANSI A137.1
For specific certificates, please contact Mirage Usa ( [email protected] ) or your sales representative
Wet floorings can be slippery. It is recommended to consider and choose a specific collection and surface paying attention to the intended use.
| 27
LAYING INSTRUCTIONS
In order to guarantee an attractive end-result, it is important first of all to spread out at least 10 sqf product on the ground floor to preview the final color effect.
Mirage recommends a minimum 2mm grout joint for all rectified products and a minimum 3mm grout joint for not rectified products.
NO
YES
More than 12”
Max 12”
28 |
w w w . m i r a g e u s a . n e t
Cod.
T37
5
Mirage USA INC.40 Burton Hills BLVD - Suite 200Nashville - Tennessee (TN) - 37215Ph. +1 615 386 7070TAX ID: 75 [email protected]
Mirage.Us Mirageit
HO
UZZ
Mirage Granito Ceramico S.p.a.HEADQUARTER41026 - Pavullo (MO) ITALYVia Giardini Nord, 225 Tel. +39 0536 29611Fax +39 0536 21065 [email protected]
Mar
ch 2
017
