Drawer Boxes&
Components
20.1May 2017
Drawer Boxes & Components
• Available in 5/8’’ and 3/4’’ thick, solid hard wood.• Available in “custom” species.• Minimum width is 5’’, minimum depth is 5 5/8’’.• Height is available from 2 1/8’’ and in 1/2’’ increments.• Standard “top edge” profile is 1/8’’ radius edge with a visible 1/8’’ groove at all four corners.
Material cost for sides, front, and back. Prices are per square inch.
Regular *Premium5/8 5/83/4 3/4
$ .115$ .185
$ .085call for pricing
$ .085$ .075
$ .085
Aromatic Cedar
Bamboo
Natural Hard Maple (Paint Grade)Mahogany
Red Oak
Soft Maple (Paint Grade)
White Birch
Drawer Bottom Cost Per Square Foot
1/4’’ Aromatic Cedar
1/4’’ Bamboo
1/4’’ Cherry
3/8’’ Cherry
1/4’’ Hard White Maple
3/8’’ Hard White Maple
$7.90 /per sq. foot
$16.05/per sq. foot
$ 7.95/per sq. foot
$8.95 /per sq. foot
$6.70/per sq. foot
$8.45/per sq. foot
Mahogany
1/4’’ Red Oak
3/8’’ Red Oak
1/4’’ Birch
3/8’’ Birch
call for pricing
$4.95/per sq. foot
$5.45 /per sq. foot
$3.10/per sq. foot
$4.25/per sq. foot
$ .065Cherry
N/AN/A.130N/AN/A.195.120.105.080.108.093.100
.113.098.100
.100.085.090
.120.105.100
20.2
Meridian Products
call for pricing call for pricing call for pricing
1/4’’ Walnut $8.95/per sq. foot
$ .045American Beech (Paint Grade) N/AN/A.055
N/AWalnut, Select .210.195N/A$ .100Walnut, Natural N/AN/A.115
May 2017
Meridian Products
Drawer Boxes & Components
*Premium Drawer Box Material Specifications
Premium drawer box material will have a uniform color and grain match and be significant-ly clear of defects. Additionally: cracks, checking or shake are not permitted. Heartwood/sapwood may not be visible. Mineral streaks will be limited to 1/16’’ X 2’’ if brown and 1/16’’ X 1’’ if black. Stain, vine marks, worm track, tiger stripe and curly grain must blend with surrounding color and grain and should not be a focal point.
• Front and back will be premium grade material on the inside of the box.• Sides of box will be premium grade material on the outside of the box.
Drawer box bottom quality will remain Meridian Products standard offering.
Meridian Products Drawer Boxes are Guaranteed for LifeMeridian Products offers a limited lifetime warranty on drawer boxes.
• Warranty is guaranteed to our original customer for the original homeowner. • Any alterations to a drawer box not by Meridian Products will void warranty.• Any defect caused by moisture will void warranty.• Lifetime warranty is for drawer box only and does not include any labor or other
supplies used during the application or installation of our drawer box.
20.3
Ordering your drawer box height in 1/8” or 5/8” increments will yield the better visual and structural result.
May 2017
Meridian Products
Drawer Box & Components
Drawer Box AssemblyAssembled & Sanded $7.40 per box
Oversized Drawer BoxesAny drawer box oversized in depth and/or width may need additional lead time.
Drawer boxes that are over 38’’ deep and/or 42’’ wide will receive a $35.00 option charge.Heights over 15" H are in 1" increments with 18" max.
FinishingClear (seal & varnish) Stain Paint
$13.55 per box$23.30 per box$34.90 per box
Custom Top Edge Profile Profiles are shaped after box is assembled leaving no open joints at corners
DRAWER BOX ORDERS CANNOT BE CHANGEDAFTER 24 HOURS OF RECEIPT OF ORDER
Custom 1/8’’ Radius$3.75/per box
Custom 1/4’’ Radius$3.75/per box
Custom Square$3.75/per boxUnassembled add $3.45/per box
20.4May 2017
Custom Laser Engraving
• Send Meridian Products an electronic copy of your logo in 300 DPI or greater resolution.
• $3.30 per laser engraved drawer box.
• Standard laser logo location is (Inside Right) or (Outside Left). You must specify location when order-ing. Custom location for laser logo is available. Custom laser logo location pricing is $5.30 per box.
• Standard size parameter for a laser engraved logo is 2’’ High or 4’’ Wide (whichever comes first).
• Any logo larger than 2’’ X 4’’ will need custom pricing.
• You can have several logos on file as long as you specify which logo per order.
• Ask your Sales or Customer Service Representative for details.
• Minimum box height for inside logo is 3 1/8" plus bottom thickness
• Minimum box height for outside logo is 2 5/8"
Meridian Products
Drawer Box & Components
20.5
Blum Tandem Locking Devices
Order your drawer boxes with Blum Tandem Locking Devices installed.Option price is per pair.
$4.25 installed per boxT51.1801
$6.40 installed per boxT51.1901
May 2017
DRAWER BOX ORDERS CANNOT BE CHANGEDAFTER 24 HOURS OF RECEIPT OF ORDER
Bread Box Sliding Lid
Roll Out Drawer BoxWith Extended Sides
Of FaceNotch For Undermounted
Drawer Track
Finger Pulls Overlaid Flush Bottom Inlaid Flush Bottom
$58.90 per box
• 1/4’’ thick clear plastic lid• Flush finger pull nickel, 3/4’’ diameter x 1/4’’ deep• Sliding lid is down 1/4’’ from
top of drawer side• 1/4’’ radius top not available
$11.95 per box
• Face is extended 7/16’’ past side• Dovetail construction• Edges of face are rounded over• Finger pull option available• Select face option $10.45
Front and Back Notch (2-1/2’’w)$2.60 per box• Minimum depth - 10’’
Back Notch (order by notch size)1 3/8’’ - $2.101 3/4’’ - $2.102 1/2’’ - $2.602 9/16’’ or above - $6.75
min box width - 5’’min box width - 5 3/4’’min box width - 7 1/4’’
min box width - 11 1/4’’
$2.60 per box
• Minimum is 3 - 1/8’’ on the height• Select face option $10.45
$23.95 per box
Meridian Products
Drawer Box & Components
No additional charge
20.6May 2017
Meridian Products
Drawer Box & Components
Scoop Drawer Box
$39.10 (Option price for cutting sides)
Customer must specify
- Depth of cut - Height of cut - Which end is front and back
20.7
Removable, Adjustable Dividers
$77.75 for up to 3 dividers$10.50 per each additional divider
Customer must specify
- Premium grade only- Dividers front to back- Dividers side to side
May 2017
Cutlery Trays
Style 1Cost: $48.45Available in Sizes:7-1/2’’ to 10’’ wide
Style 5Cost: $99.95Available in Sizes:25-5/8’’ to 35-1/2’’ wide
Style 4Cost: $87.15Available in Sizes:19-5/8’’ to 25-1/2’’ wide
Style 3Cost: $74.20Available in Sizes:14’’ to 19-1/2’’ wide
Style 2Cost: $61.40Available in Sizes:10-1/8’’ to 13-7/8’’ wide
SPECIFICATIONS FOR ALL STYLES
• 3/8’’ premium hard white maple• 1/4’’ birch plywood bottom• Designed to fit inside a standard drawer• All units are 3’’ high overall
WHEN ORDERING SPECIFY:
• Style 1, 2, 3, 4, or 5• Overall width• Finished or unfinished• Depth: 19’’ standard; 16’’ minimum; 22’’ maximum
Finishing Price $18.55
Cutlery trays that are less than 16’’ deep and more than 22’’ deep will require custom pricing.
Meridian Products
Drawer Box & Components
20.8May 2017
Meridian Products
Drawer Box & Components
SPECIFICATIONS• PREMIUM HARD WHITE MAPLE, OTHER
SPECIES REQUIRE CUSTOM PRICING• 1/4’’ birch plywood bottom• Designed to fit inside a standard drawer• Dimensions: Minimum Height: 4-5/8’’ (5-1/8’’ is standard) Style 2: 11-3/4’’ - 18-3/4’’ wide Style 3: 14-3/4’’ - 24-1/4’’ wide Style 4: 20 1/4’’ - 27 3/4’’ wide Style 5: 25’’ - 38 1/4’’ wide Standard depth - 21’’• Choice of style 2, 3, 4, or 5 cutlery tray design (see page
20.8 for details)• Choice of unfinished or finished in clear
When ordering, specify:• Style 2, 3, 4, or 5.• Width• Finished or unfinished
SPECIFICATIONS• Minimum height: 4-1/8’’• Minimum depth: 17-1/4’’• Minimum width: 5’’• Maximum width: 24’’• 5/8’’ solid hardwood sides Premium hard white maple Natural soft maple Natural cherry• 1/4’’ or 3/8’’ bottoms• 4 adjustable shelves 1-1/2’’ high x 3-1/2’’ depth x width of box
When ordering, specify:• Species• Bottom stock• Dimensions• Finished or unfinished
PRICING $152.50Plus material cost from page 20.2Clear finish $23.55
Double Decker Cutlery Drawer Boxes
Spice Drawer
21’’PRICING: Style 2 or 3 $315.90 Style 4 $339.20 Style 5 $363.60- Unfinished price• If finishing, add $18.55 per box• Price includes: hardware, cutlery
tray, and drawer box
20.9May 2017
Spice Rack
Can Storage Unit
SPECIFICATIONS• Premium hard white maple• 5/8’’ solid• 1/4’’ birch back• Dovetail construction• Adjustable shelves have
1-1/4’’ increments with lock-in-place feature• Maximum 8’’ spacing be-
tween shelves• Retainer bar attached to each
shelf• Dimensions: A = height 18’’ to 60’’ B = width 5’’ to 21’’ C = depth 3-1/8’’ fixed
When ordering, specify:• Dimensions A & B• Finished or unfinished
PRICING$4.50 per inch of height up to 14’’ wide
$4.95 per inch of height from 14 1/16’’ up to 21’’ wide
$16.65 PER EXTRA SHELF
Finishing Price $42.75 Clear
SPECIFICATIONS• Premium hard white maple• 5/8’’ solid• 1/4’’ birch back• Dovetail construction• Adjustable shelves have
1-1/4’’ increments with lock-in-place feature• Maximum 8’’ spacing
between shelves• Retainer bar attached to
each shelf• Dimensions: A = height 21’’ to 60’’ B = width 5’’ to 21’’ C = depth 5-1/8’’ is standard• NOTE: 42’’ and above will
have fixed center shelf
When ordering, specify:• Dimensions A & B• Finished or unfinished
PRICING$4.50 per inch of height up to 14’’ wide
$4.95 per inch of height from 14 1/16’’ up to 21’’ wide
$16.65 PER EXTRA SHELF
Finishing Price $42.75 Clear
B
C
A
B
C
A
Meridian Products
Drawer Box & Components
20.10
OPTION1/2’’ finished back $80.80
OPTION1/2’’ finished back $80.80
May 2017
Meridian Products
Drawer Box & ComponentsPull-Out Can Storage Unit
SPECIFICATIONS• Premium hard white maple• 3/4’’ solid• 5/8’’ solid maple shelves• Dovetail construction• Adjustable shelves accessible
from both sides of unit• Retainer bar attached to each
shelf• Dimensions: A = height 21’’ to 60’’ B = depth 8’’ to 21’’ C = width 5-1/8’’ is standard• NOTE: 42’’ and above will
have fixed center shelf• Custom depths are available
PRICING$6.30 per inch of height up to 14’’ deep
$6.75 per inch of height from 14-1/16’’ up to 21’’ deep
$16.65 per extra shelf
Finishing Price $42.75 Clear
B
C
A
20.11May 2017
SPECIFICATIONS• Solid 5/8’’ Premium hard maple dovetailed box• 3/4’’ Veneered MDF top banded all 4 sides, flush front and
back and 3/8’’ overhang on both sides• Made to install in cabinet on side mounted full extension
drawer slides• Drawer hardware not included• Dimensions: Height 3-13/16’’ standard Width 11’’ to 18’’ Depth 21-3/4’’ standard• Note: 15’’ to 18’’ can accommodate a double cut out
OPTION#1 - One cutout and one (1) Rubbermaid 7 gal. waste basket#2 - Two cutouts and two (2) Rubbermaid 7 gal. waste baskets
When ordering, specify:• Width of box, not top• Optional cutout• Finished or unfinished
PRICING $87.30 per uncut unit• add $32.60 for option 1• add $65.20 for option 2• Note: standard cutout opening 9-5/8’’ x 13-5/8’’
FINISHING PRICE $13.55 clear
Type A Pull-Out Waste Can Unit
Meridian Products
Drawer Box & Components
OptionalCutout #1
OptionalCutout #2
20.12May 2017
Meridian Products
Drawer Box & Components
SPECIFICATIONS• Solid 5/8’’ Premium hard maple dovetailed box• 3/4’’ Veneered MDF top banded all 4 sides, flush front
and back and 3/8’’ overhang on both sides• Made to install in cabinet on side mounted full extension
drawer slides• Drawer hardware not included• Dimensions: Overall Height 15-7/8’’ standard Width 11’’ to 18’’ Depth 21-3/4’’ standard• Note: 15’’ to 18’’ can accommodate a double cut out
OPTION#1 - One cutout and one (1) Rubbermaid 7 gal. waste basket#2 - Two cutouts and two (2) Rubbermaid 7 gal. waste baskets
When ordering, specify:• Width of box, not top• Optional cutout• Finished or unfinished
DESIGN PRICE: $128.00 per uncut unit
OPTION PRICING: Option #1 cut out - add $32.60 Option #2 cut out - add $65.20
FINISHING PRICE $18.90 clear
Type B Pull-Out Waste Can Unit
OptionalCutout #1
OptionalCutout #2
20.13May 2017
Meridian Products
Drawer Box & ComponentsWall End Open Shelf Unit 1
Wall End Open Shelf Unit 2
SPECIFICATIONS• 3/4’’ solid wood shelves top,
bottom & center shelves• 3/4’’ Veneer MDF side and
back with banded edges• 4’’ Radius on shelves• Equally spaced shelves max.
of 12’’ between shelves• Dimensions: A = height 24’’ to 48’’ B = width 4’’ to 6’’ C = depth 12’’ to 13’’
When ordering, specify:• Wood species (Premium only)• All dimensions• Left or right face (left shown)• Square or radius “top” shelf• Finished or unfinished
PRICING$5.75 per inch of height
FINISHING PRICESper inch of height
Clear $1.75Paints $2.75Stains $2.40
Add glaze over paint or stain: $2.10
Meridian Products Finish Collections $5.25
SPECIFICATIONS• 3/4’’ solid wood shelves top,
bottom & center shelves• 3/4’’ Veneer MDF side and back
with banded edges• 1/4’’ Circle radius on shelves• Equally spaced shelves max. of
12’’ between shelves• Dimensions: A = height 24’’ to 48’’ B = width 12’’ to 13’’ C = depth 12’’ to 13’’
When ordering, specify:• Wood species (Premium only)• All dimensions• If dimensions B & C are not
equal, specify left or right face• Square or radius “top” shelf• Finished or unfinished
PRICING$6.10 per inch of height
FINISHING PRICESper inch of height
Clear $1.75Paints $2.75Stains $2.40
Add glaze over paint or stain: $2.10
Meridian Products Finish Collections $5.25
B C
A
BC
A
20.14May 2017
Meridian Products
Drawer Box & ComponentsBase End Open Shelf Unit
Peninsula End Open Shelf Unit
SPECIFICATIONS• 3/4’’ solid wood shelves top,
bottom & 1 center• 3/4’’ Veneer MDF side and
back with banded edges• 4’’ Radius on shelves• Equally spaced shelves max. of
15’’ between shelves• 4’’ toe kick, recessed 3’’ with
square corner• Dimensions: A = height 29’’ to 84’’ B = width 6’’ to 12’’ C = depth 18’’ to 25’’
When ordering, specify:• Wood species (Premium only)• All dimensions• Left or right face (left shown)• Square or radius “top” shelf• Finished or unfinished
PRICING$9.50 per inch of height $7.30 per inch over 48’’
FINISHING PRICESper inch of height
Clear $2.60Paints $4.70Stains $3.60
Add glaze over paint or stain: $2.90
Meridian Products Finish Collections $7.00
SPECIFICATIONS• 3/4’’ solid wood shelves top,
bottom & 1 center• 3/4’’ Veneer MDF back with
banded edges• Half circle shelves• Equally spaced shelves max. of
15’’ between shelves• 4’’ toe kick, recessed 3’’• Dimensions: A = height 29’’ to 84’’ B = width 6’’ to 12’’ C = depth 18’’ to 25’’
When ordering, specify:• Wood species (Premium only)• All dimensions• Square or radius “top” shelf• Finished or unfinished
PRICING$11.20 per inch of height
FINISHING PRICESper inch of height
Clear $2.60Paints $4.70Stains $3.60
Add glaze over paint or stain: $2.90
Meridian Products Finish Collections $7.00
BC
A
B C
A
20.15May 2017
Meridian Products
Drawer Box & ComponentsWine Rack
Stemware Rack
SPECIFICATIONS• 4’’ x 4’’ square bottle openings• 1/2’’ x 3/4’’ solid wood material,
using 1/2’’ lap at all joints• All “face” edges are sanded and
finished with a 1/8’’ radius• 2 racks are recommended to
make a complete unit• Minimum size is 1 square foot • 1 dimension may not exceed 36’’ • Maximum is 15 sq. ft.
When ordering, specify:• Wood species• Width and height (maximum size 32’’ x 72’’)• Finished or unfinished
PRICING$31.35 per sq. ft.
FINISHING PRICESper sq. ft.
Clear $8.60Paints $24.35Stains $15.90
Add glaze over paint or stain: $12.50
Antique Bone, Antique Pewter, Antique Slate, Biltmore, Hearthstone: $37.20
SPECIFICATIONS• 1/2’’ x 2-1/4’’ frame strips• 3/4’’ x 3-7/16’’ wide holders
attached on 4-1/2’’ centers• Dimensions: A = height 1-1/4’’ fixed B = width 13’’ x 48’’ C = depth 11’’ fixed
When ordering, specify:• Wood species• Width• Finished or unfinished
PRICING$74.75 - up to 24’’ long$96.65 - 24-1/16’’ up to 36’’$113.65 - 36-1/16’’ up to 48’’
FINISHING PRICESper piece.
Clear $34.10Paints $87.50Stains $56.20
Add glaze over paint or stain: $37.50
Antique Bone, Antique Pewter, Antique Slate, Biltmore, Hearthstone: $140.10
B C
A
20.16May 2017
Meridian Products
Drawer Box & Components
SPECIFICATIONS• 3/4’’ MDF core or veneer core, Natural Hard Maple
veneered shelves• 1/4’’ plywood edge banding• 5/8’’ solid wood edge band on pie cut and across D cut
edges
Edge height is the outside height dimension of Susan shelves. Deduct 3/4’’ for inside height. Edge height options: A = 1-3/4’’ B = 2-3/4’’
When ordering, specify:• Diameter• Style• MDF or veneer core• Optional pre-drilled center: $2.00• Finished or unfinished• Edge height (A = 1-3/4’’, B = 2-3/4’’)
PRICING - all styles$83.50 - 18’’ to 20’’ diameter$104.55 - 21’’ to 30’’ diameter$124.90 - 31’’ to 32’’ diameter
FINISHING PRICE $13.55 per shelf
Custom Lazy Susan w/ Plywood Edge
Pie Cut
D-Cut
Full Round
Safety Susan20.17
May 2017
Meridian Products
Drawer Box & ComponentsLazy Susan Standard Hardware
SPECIFICATIONS FOR ALL ON THIS PAGE
• All hardware is finished with a beige epoxy paint • All base plates are made of 11 gage steel a) wall units have 5’’ x 5’’ base plates b) base units have 10’’ x 10’’ base plates• All mounting flanges are 5’’ x 5’’, 11 gage steel,
mounted to 1-3/8’’ overall diameter steel tubing with polymer bushings
• 1’’ solid steel center shaft
PLS - 10 (shown left)• 2 tier, 13-1/2’’ between tiers• Holds shelves up to 34’’ in diameter• 15’’ overall height• No detent to stop shelves from
rotating• For use with FULL ROUND shelves
PRICING $80.35
PLS-D-10• Same as PL - 10 except it has a detent to stop shelves from rotating• For use with PIE CUT style shelves
PRICING $88.20
WCR-D (shown left)• Single tier• Holds 1 shelf up to 34’’ in diameter• Has detent to stop shelves from
rotating• For use with any style shelf
PRICING $36.75
LS - 35D (shown above)• 3 tier, 9’’ between tiers• Holds shelves up to 20’’ in diameter• 19’’ overall height• Has detent to stop shelves from
rotating• For use with any style shelf• Note: minimum 32’’ high cabinet
recommended
PRICING $125.00
SS - 22MD “SAFETY SUSAN” (not shown)• 2 tier 13-1/2’’ between tiers• Holds shelves up 34’’ in diameter• 27-1/2’’ overall height• Doors are attached to unit, when
rotated they retract inward when returning to detent they center and close smoothly
• Positive cam action cause door to close slowly eliminating “pinched” fingers
• Top mounting brackets with full adjustments for door alignment
PRICING $249.9520.18
May 2017
PLEASE ORDER
PLEASE QUOTE124 Earland Drive, New Holland, PA 17557-1503
Phone: (717) 355-7700 Fax: (888) 355-7361
Drawer Box Order Form
RUSH (25% UPCHARGE) EXPEDITE (50 % UPCHARGE) MAXIMUM: 5 BOXES
HEIGHT WIDTH
DEPTH
QTY: *HEIGHT WIDTH DEPTH FINGER
PULL
S
EXTE
NDED SI
DES O
F FACE
LASE
R ENGRAV
ED LO
GO
PLEASE CHECK ONLY 1 OPTION IN EACH
OF THE CATEGORIES BELOW
WOOD SPECIES BOTTOMS ASSEMBLY Aromatic Cedar Birch Cherry Natural Hard Maple (Paint Grade) Soft Maple Red Oak Other ______________
1/4” Birch 1/4” Red Oak 1/4” Cherry 3/8” Birch 3/8” Red Oak 3/8” Cherry 1/4’’ Maple3/8’’ MapleNone
Unassembled Assembled and Sanded
UNDERMOUNT NOTCH
TOP OPTIONS FINISHING Standard 1/8” Radius Custom Sq. Edge Custom 1/8” Radius Custom 1/4” Radius
None ClearStain Paint ______________
Back 13/8
13/4
21/2
33/4
4 41/2
None
Logo Name:_________________________Inside Box
(Right Side)Outside Box
(Left Side)
CHEC
K IF A
PPLICABLE
BREAD B
OX
5/8’’ Thick Sides
3/4’’ Thick Sides
SOLD TO:
Customer #:_______________________ Company:________________________________ Requested Ship Date:___________________
Address:___________________________________ City:________________________ State:___________________ Zip:__________________
Phone:_______________________________Fax:______________________________ Customer Contact:____________________________
PO#:_________________________________ Date Ordered:_______/______/___________ Ship Via:________________________________
Customer Job Name:___________________________________________________________________________________________________
SHIP TO:Customer #:_______________________ Company/Name:___________________________________________________________________
Address:___________________________________ City:__________________________ State:__________________ Zip:_____________
SPECIAL INSTRUCTIONS:______________________________________________________________________________________________
Regular Grade Premium Grade* Order height ending in 1/8’’ or 5/8’’
May 2017