Date post: | 18-Jan-2018 |
Category: |
Documents |
Upload: | allen-grant |
View: | 215 times |
Download: | 0 times |
If you can't read please download the document
DREDGEPACK Basics DREDGEPACK Benefits Horizontal control: - Area
map shows current dredgelocation.- Can show other nautical charts
orDXF files. Vertical control:- Color coded cells show
currentdepth.- Profile views show current andrequired depth.
Reporting requirements:- USACE Silent Inspector- Production
control- Monitor dredge operations from aremote site. DREDGEPACK is
based on HYPACK SURVEY if your survey crew uses HYPACK the move
toDREDGEPACK should be straightforward. Dredge Types Cutter Suction
Dredge Types - Crane Dredge Types - Excavator Dredge Types - Hopper
Dredge Types Hopper Custom Interfaces DREDGEPACK Matrix DREDGEPACK
requires a filled MTX.
TIN MODEL can fill ablank matrix. XYZ TO MTX can fill ablank
matrix. For each matrix cell,DREDGEPACK tracks: The As Surveyed
depth. Doesnt change z- value. Populated in TINMODEL. The As
Dredged depth. Initially set to AsDredged z-value. Updated with
thedepth at which thecutting tool haspassed through thecell. As
Surveyed Matrix in NotePad X,Y of 1 Corner Matrix Length and Width
Cell Resolution Matrix box rotation End of header ID Cell #Survey
Depth Dredge Depth As Dredged Matrix Display Selection Display
Survey Depths or Dredge Depths
Both DREDGEPACKand the HYPACK shellcan display either: As Surveyed
Matrixvalues. As Dredged Matrixvalues. In HYPACK: Right-click on
MatrixFiles (under ProjectFiles listing). In DREDGEPACK: Click
Matrix menu Right Click on Matrixin Map HYPACK Shell DREDGEPACK
Matrix Options: Matrix Menu
Record Depth: Depth Project = Maximum Elevation Project = Minimum
Matrix Update While Logging User must remember to start- line and
end-line. Always Recommended Last Changes cell based on
lastobserved depth in matrix cell Use uncorrected depth: Leave
un-checked. Only use if you want toexclude, draft, tide and
pitchand roll corrections DREDGEPACK requires user-defined MTX
files.AutoMTX does not work with DREDGEPACK! Filling Your MTX File
with Survey Data
AVI TIN MODEL is the best place to fill your MTX with survey data.
Infills anywhere the model has generated a triangle. TIN MODEL
generates the AS SURVEYED value for each matrix cell. When you
first load the MTX file into DREDGEPACK, it copies the AS SURVEYED
values in each cell to the AS DREDGED values. DREDGEPACK modifies
the AS DREDGED values, based on the depth and position of the
digging tool. Filled MTX of Single Beam Data (100 spacing between
lines) Cell Coverage Use the VULCAN.DLL to expand the cell
coverage. Setup:
Also use to set thesize of the bucket. Bucket Height andWidth.
Vertical and HorizontalSpacing: Distance of calculateddepth points
in bucketshape. Mobile Number: Equals Mobile # ofdigging tool.
Bucket Height Without VULCAN driver, digging tool is a point.Only
one cell is adjusted. With VULCAN tool, all cells that fall within
the VULCAN dimensions are adjusted. VULCAN.DLL Setup from HARDWARE
CutFill.dll Tells the operator how much material is above or below
the template in the Matrix cell that the cutter tool is over The
template that cutfill.dll references is found in Chart/Channel and
can be either a .MTX or a .CHN file A right click in the driver GUI
in DREDGEPACK will give options about tolerances you are willing to
give the operator and display colors Genoffset.dll Can be used to
track just about anything on your dredge
Offsets get placed in the setup form for this driver Left right
Indicators and Station and Range in the Data display can be derived
for this positions Best way to avoid a pipeline! Digging Plans
Digging Plan Options CHN File from ADVANCED CHANNEL DESIGN
PLN File from CHANNEL DESIGN (Depreciated) Template (TPL) and
Centerline (LNW) MTX design file from TIN or XYZ to MTX program
Entering CHN, PLN, or TPL/LNW in DREDGEPACK Complex dredge plan in
CHN format Dredge plan in PLN format Dredge plan in MTX format
Entering Your Digging Plan
3 Options PLN File Made in: CHANNEL DESIGN CHN File Made in:
ADVANCED CHANNEL DESIGN Change the File of type to load a MTX as a
template TPL File Made in: CROSS SECTIONS & VOLUMES LNW
File:Centerline Only Profile Types Boat Profile Window
Perpendicular to vessel to line Arc Parallel || to vessel || to
line Water level changes based on tide input. Vessel rises and
sinks based on draft input. Planned Line Profile Window Activate
the Profile windows from the Vessels window.
Inside the Profile window, click on Setup to gain access to the
Profile Setup window. Smooth Channel profile will Smooth out slopes
if they appear stair stepped User-BMP Display in Profile
Window
Copy your BMP to the \HYPACK 2012\Shapes folder. Run Preparation
Editors Dredge BMP Import your BMP Select your dredge type and side
Set the water level reference Set the trunnion point location Save
DREDGEPACK AVI DREDGE BMP Program Profile Window Direction and
Orientation
Profiles: Perpendicular:For hopper and cutter suction dredge (most
common). Parallel:Normally used for a hopper dredge. Arc: for
cutter suction dredges. Profile Orientation: Relative to vessel
Relative to planned line (if available) Relative to channel
centerline (if available) Profile Window Limits and Labels
Labeling- Horizontal and Vertical: Profile limits: Min/Max Depth or
Profile Width Label Interval Tic Interval : Major tics are lines
across the window Marks (Mark 1 & Mark 2): Lines drawn with a
different color. Profile Window - Colors
Press the Colors button Use sliders to adjust colors of each
element. Silent Inspector Logging & Exporting Dredge Data
DREDGEPACK uses the same logging methodology asHYPACK
SURVEY.(CTRL-S to start, CTRL-E to end.) In the HARDWARE program,
the user can configureDREDGEPACK to begin logging (CTRL-S)
automaticallyon starting the program. Logging can also be done
using the Shared MemoryOutput program: Send info to ASCII TXT file
or out radio modem. No S/L or E/L actions required by operator.
Allows for dredge monitoring as required by contractor. USACE
Silent Dredge Inspector supported withstandard device driver
(including XML support). SISender.DLL (for Hoppers)
DQM_Mechanical.DLL (for Cranes) DQM Cutter Suction Dredges
Sends messages at user defined intervals. Populates custom drivers
(next page) DQM Cutter Suction variables
NewInc.dll Does computations internal toHYPACK for production
Formulas given to usby USACE Sends data to USACE serversfor
compliance Ability to customize downtimeevents with user selections
Fully compatible with USACEDQM specifications DQM Mechanical