Dremel Catalogue 2014-2015

Catalogue 2014-2015

1Contents

Introduction

Project catalogue

Multitool System

DREMEL 200 Series

DREMEL 3000

DREMEL 4000

DREMEL 4200

DREMEL 7700

DREMEL 8100

DREMEL 8200

Multitool Accessories

DREMEL EZ SpeedClic

Carving / Engraving / Routing

Grinding / Sharpening

Cleaning / Polishing

Cutting

Sanding

Collets / Mandrels / Miscellaneous

Accessory Kits

Multitool Attachments

Attachments to Control

Attachments to Cut

Attachments to Reach

Attachments to Rout

Attachments to Saw

Attachments to Sharpen

Compact Tool System

4

7

13

15

17

20

23

25

27

29

35

37

38

41

44

49

54

57

60

69

70

73

75

76

77

78

81

2 DREMEL-Catalogue 2014-2015

Contents

DSM20 System

DREMEL DSM20

DSM20 Accessories

DSM20 Attachments

Multi-Max System

DREMEL Multi-Max 8300

DREMEL Multi-Max MM20


Multi-Max Accessories

Multi-Max Attachments

TRIO System

TRIO Accessories

Glue Gun System

DREMEL Glue Gun 910

DREMEL Glue Gun 940

Glue sticks

VersaTip System

DREMEL VersaTip

Butane Tool Accessories

VersaFlame System

DREMEL VersaFlame


Engraver System

DREMEL Engraver

Engraver Accessories

Benchtop Tool System

Moto-Saw System

82

82

84

85

86

86

88

90

92

95

96

96

99

99

101

103

104

104

106

107

107

109

110

110

112

115

116

3Contents

DREMEL Moto-Saw

Moto-Saw Accessories

Fortiflex System

DREMEL Fortiflex

Fortiflex Attachments

Icons

Index by numbers

116

118

119

119

121

122

125


Introduction

Recognizing the changing consumer needs, Dremel has recently introduced moreproducts outside of its core segment, the multitools. This expansion led the Dremel brandfrom the makers of a Multitool System to the makers of Versatile Tool Systems . Thesedifferent systems create value and benefit to our consumers, as the innovative toolsalong with a wide range of available accessories and attachments will allow for manyproject applications, making them truly versatile.

These are the different Versatile Tool Systems :Multitool SystemCompact Tool SystemBenchtop Tool System

In this brochure the different Dremel systems will be explained, to guide you to the righttools, accessories & attachments for every project for a successful outcome.

There is truly no limit on the amount of projects you can do with the Dremel Versatile ToolSystems .

7Project catalogue

This section of the catalogue provides ideas on the inspiring projects you can do usingDremels Versatile Tool Systems. All projects that are shown have the following things incommon: They are inspiring, fun to do and require an eye for detail. These are justexamples; discover the endless possibilities when using your Dremel tool.

1. Home Dcor

2. Arts and Craft

3. Seasonal Ideas

4. DIY / Restoration


Home Dcor

Lounge seat for balcony

Stylish Dining Table

Wooden Bowl with Filigree Pattern Rim

Stylish Bookshelf

For further details, step by step guides and more project ideas visit www.dremel.com.dremel.com

9Arts and Craft

Statement Necklace

Wedding Present: Champagne Flutes

Friendly Snake Jigsaw

Make Your Own Family Kite

For further details, step by step guides and more project ideas visit www.dremel.com


Seasonal Ideas

Easter Vase

Halloween Masks

Snowflake Window

Advent Calendar


11

DIY / Restoration

Insetting Lighting into your Garden Decking

Creating a Stylish Wine Rack

Installing a vent into flooring

Repair Scratches on Wing Mirror Casings


13

Multitool System

Dremel is the inventor of the world famous Multitool System that can be used for a greatnumber of projects both indoor and outdoor. Whether you are an experienced craftsmanor beginner this system is perfect for anyone looking for precision for a wide variety ofapplications such as: engraving, carving, routing, cutting, sanding, polishing and more.The Dremel Multitool System comprises of tools, accessories (including EZ SpeedClic)and attachments.

Corded

DREMEL 200 Series DREMEL 200 Series (200-5)

DREMEL 3000 DREMEL 3000 (3000-15)DREMEL 3000 (3000-1/25)

DREMEL 4000 DREMEL 4000 (4000-1/45)DREMEL 4000 (4000-4/65)DREMEL 4000 PlatinumEdition (4000-6/128)

DREMEL 4200

New

Dremel 4200 (4200-4/75)

Cordless

DREMEL 7700 DREMEL 7700 (7700-30)

DREMEL 8100 DREMEL 8100 (8100-1/15)


Multitool System

DREMEL 8200 DREMEL 8200 (8200-1/35)DREMEL 8200 (8200-2/45)DREMEL 8200 PlatinumEdition (8200-5/65)

15

DREMEL 200 Series

Technical Specification

Weight 0,55 kgNo load speed 15.000 - 35.000 1/minVoltage 230 VRated power input 125 W

The Dremel 200 Series is the idealmultitool to get started with Dremel. It'seasy and comfortable to use and offerstrusted Dremel quality and reliability at anaffordable price point. The tool iscompatible with all accessories andattachments, and with the enclosedaccessories for sanding, metal cutting andgrinding the user can start working withDremel immediately.

Features and Benefits

Powerful 125W motorAllows working with all Dremel accessoriesand attachments comfortably.

Hanger bailTo hang the tool on the Dremel Tool holder.

2 speed settings (15.000 & 35.000 1/min)Making it the ideal multitool for first time usersto do most DIY and Hobby projects.


DREMEL 200 Series (200-5)

For this tool the following kit execution isavailable:

Contents

Order information Ordernumber: F0130200JA EAN: 8710364049677

Dremel 200 Series5 high quality Dremel accessoriesInstruction manual

Included accessories

Grinding/sharpening

932

Cutting

426(2)

Sanding

407

Collets/Mandrels/Miscellaneous

402

17

DREMEL 3000



The Dremel 3000 is the perfect all-roundmultitool with the new innovative EZ TwistNose cap. With this new feature there is noneed for a wrench to tighten and loosenthe collet when changing accessories, thewrench mechanism is integrated in thenose cap of the tool. The tool offers theuser a comfortable grip with its convenientlightweight housing. The Dremel 3000 isthe ideal tool for users that like to carry outdetailed tasks, such as cutting, sanding,engraving etc, whether occasionally orregularly. With the Dremel 3000, Dremeloffers great quality at an affordable price.


Variable speed 10.000 33.000 RPMmore comfortable and better control whenhandling.

Collet lockfor assisting accessory changes.

Innovative EZ Twist Nose Capno wrench required for changing accessories.

Integrated hang hookfor hanging the tool on the Tool holder or nearthe project.

Replacable brushes. 130W motor

for optimal performance. Soft grip

for reduced vibration and a better handling.


DREMEL 3000 (3000-15)

This kit includes the Dremel 3000 multitooland 15 genuine Dremel accessories, allpacked in a convenient bag. This executionis the entry level kit, offering the Dremel3000 with a small selection of usefulaccessories.

Contents


Dremel 300015 high quality Dremel accessoriesInstruction manualSoft bag


Grinding/sharpening

932

Cleaning/polishing

414(2) 403

Cutting

540(4)

Sanding

408 407 432(2)


401 402 150

19

DREMEL 3000 (3000-1/25)

This kit includes the Dremel 3000 multitool,the high quality Dremel Flexible Shaft and25 genuine Dremel accessories includingEZ SpeedClic. All this is packed in aconvenient case. This is a high value kit,offering great value for money for the moredemanding user.

Contents

Order information Ordernumber: F0133000JD EAN: 8710364060887

Dremel 300025 high quality Dremel accessories (includingEZ SpeedClic accessories)High quality Flex ShaftInstruction manualSpacious and sturdy storage case


Carving/Engraving/Routing

191

Grinding/sharpening

952 85602

Cleaning/polishing

414(2) 429(2) 421

Cutting

SC456(2)

540(5)

Sanding

407 408(2) 432(3)


402 150 SC402 401


DREMEL 4000



The powerful and precise Dremel 4000multitool delivers maximum all-roundperformance. Thanks to it's electronicfeedback the tool always deliversmaximum force when the job gets tougher.Together with the soft grip and precisespeed setting you are in perfect control ofevery situation. With the innovative EZTwist Nose Cap there is no need for awrench to tighten and loosen the colletwhen changing accessories, the wrenchmechanism is integrated in the nose cap ofthe tool. The collet lock out functionprevents you from accidentally blockingthe output shaft of the tool. This tool is anabsolute must for the most demandingcraftsman. The Dremel 4000: maximumall-round performance.


High power 175W motorfor high performance

Soft grip in all gripping areasfor better handling

Full variable speed control (5.000-35.000RPM)for maximum precision

Electronic feedbackfor enhanced torque and performance

Separate on/off switch with integratedcollet lock out function

21

DREMEL 4000 (4000-1/45)

This kit includes the high performance 4000multitool, with innovative features like theEZ Twist nose cap, electronic feedback,collet lock out function and an RPMbandwidth of 5.000 to 35.000. Additionallythe kit includes the Flexshaft attachment,which is the ideal attachment for detailedwork on hard to reach places. Next to theFlex Shaft attachment the kit includes 45original Dremel accessories including EZSpeedClic.

Contents


Dremel 400045 high quality Dremel accessories (includingEZ SpeedClic starter set)High quality Flex ShaftInstruction manualSoft bag



191

Grinding/sharpening

932 85422

Cleaning/polishing

422(2) 414(3) 403 421 425

Cutting

SC456(2)

Sanding

408(2) 432(3) 511 413(10) 407 411(11)


150 SC402 401 402


DREMEL 4000 (4000-4/65)

This Dremel kit includes the highperformance 4000 multitool with the newEZ Twist Nose Cap. This means no wrenchis needed anymore when changingaccessories. It comes in a practicalcarrying case which contains the FlexShaft, the Line & Circle Cutter, thedetailers grip and the shaping platformattachment. Furthermore 65 originalDremel accessories are included.

Contents


Dremel 400065 high quality Dremel accessories in MiniAccessory Case (including EZ SpeedClicstarter set)High quality Flex ShaftPencil grip nose capLine & Circle CutterShaping PlatformDetailers GripInstruction manualSpacious and sturdy storage case



191 107

Grinding/sharpening

85422 541 932

Cleaning/polishing

414(3) 421 404 429(3)

Cutting

561 SC456(2)

420(20) 560

Sanding

413(7) 411(7) 432(4) 407 408(3) 511(2)


402 401 SC402 150

23

DREMEL 4200

New



The powerful Dremel 4200 is the firstmultitool with an integrated accessoryquick change mechanism: EZ Change.This innovative feature ensures keylessaccessory change within seconds. Thanksto it's electronic feedback and powerfulmotor the tool always delivers maximumforce when the job gets tougher. Togetherwith the soft grip and precise speedsetting you are in perfect control of everysituation. The Dremel 4200: toptechnology and maximum performance.


EZ ChangeThe world's first accessory quick changesystem for multitools

175W motorfor high performance

Electronic feedbackfor enhanced torque and performance

Full variable speed control (5.000 33.000 RPM)for maximum precision

Soft grip in all gripping areasfor excellent handling

Separate on/off switchfor easy handling

Not compatible with the 628, 4485 and4486 accessories


Dremel 4200 (4200-4/75)

New

This kit includes the top of the line Dremel4200 with EZ Change, the world's firstaccessory quick change system formultitools. Additionally, the kit includes 4attachment: Cutting Guide, Line & CircleCutter, Shaping Platform and the ComfortGuard attachment. Next to theseattachments also 75 original Dremelaccessories are included. The Dremel4200: innovation and maximumperformance.

Contents


Dremel 420075 high quality Dremel accessoriesCutting Guide attachmentLine & Circle CutterShaping Platform attachmentComfort Guard attachmentSpacious and sturdy storage case



191

Grinding/sharpening

85602 997 952

Cleaning/polishing

421 414(6) 429(6) 403

Cutting

540(7) SC456(5)

561

Sanding

408(11) 407 413(8) 411(8) 432(12)


150 402 401 SC402

25

DREMEL 7700


Battery voltage 7,2 VWeight 0,280 kgNo load speed 10.000 - 20.000 1/minBattery capacity 0,7 AhBattery technology NiCd

The CORDLESS Dremel 7.2V with its goanywhere convenience, can easily be usedindoor as well as outdoor. This tool has theideal performance for small craft projectsand light DIY tasks. Together with itscomfortable handling and ease of use itsa great tool to have ready to go at any timefor carving, grinding, cutting, sanding andmore in all kind of materials.


Cordless 7.2V Ni-CadFor inside and outside use with all Dremelaccessories.

Dual speed (10.000 & 20.000 1/min)For quick DIY & Hobby applications.

Compact and lightweight designMakes the tool easy and comfortable to use.

Exchangeable batteryFor easy charging.


DREMEL 7700 (7700-30)


Contents


Dremel 770030 high quality Dremel accessoriesChargerInstruction manualSoft case


Grinding/sharpening

952 85602

Cleaning/polishing

414 429 421

Cutting

420(20)

Sanding

431(2) 430 438(3)


402 401

27

DREMEL 8100


Battery voltage 7,2 VWeight 0,413 kgNo load speed 5.000 - 30.000 1/minCharging time 1 hBattery capacity 1,3 AhBattery technology Lithium-Ion / ECP

The Dremel 8100 is the perfect all-roundcordless Li-ion multitool with the newinnovative EZ Twist Nose cap. With thisnew feature there is no need for a wrenchto tighten and loosen the collet. TheDremel 8100 has a powerful 7,2V motorand Li-ion battery pack is fully charged in1-hour. The Dremel 8100 is the ideal toolfor users that like to carry out detailedtasks, indoor/outdoor, such as cutting andengraving. The Dremel 8100, the mostcomfortable and easy to use cordlessmultitool.


Variable speed5.000 30.000 RPM more comfortable whenhandling and better control

Innovative EZ Twist Nose Capno wrench required for changing accessories

No nuisance trippingtools doesn't stop after stalling it

Compact and Powerfull 7,2V motorfor optimal performance

Fast chargingwith a 1-hour charger

Soft gripfor reduced vibration and better grip


DREMEL 8100 (8100-1/15)

The Dremel 8100 tool kit includes a 1-hourLi-ion battery charger, the Dremel Detailer'sGrip attachment and 15 genuine Dremelaccessories. All these items are packed in aconvenient soft bag.

Contents


Dremel 810015 high quality Dremel accessoriesDetailer's Grip attachment (577)1-Hour battery chargerInstruction manualSoft bag


Grinding/sharpening

932

Cleaning/polishing

414(2) 403

Cutting

540(4)

Sanding

408 407 432(2)


401 402 150

29

DREMEL 8200


Weight 0,600 kgNo load speed 5.000 - 30.000 1/minBattery voltage 10,8 VCharging time 1 hBattery technology Lithium-Ion / ECPBattery capacity 1,5 Ah

The Dremel 8200 is the most powerfullcordless multitool for the more demandingDIYer. Especially for maximumperformance jobs, like cutting andgrinding both indoor as well as outdoor inall sorts of materials. With the innovativeEZ Twist Nose Cap there is no need for awrench to tighten and loosen the colletwhen changing accessories, the wrenchmechanism is integrated in the nose cap ofthe tool. The 8200 has a 10.8V Li-ionbattery with ECP technology and a quick1-hour charger. Together with thecompact and efficient electric motor youcan tackle any projects with greater easeand effectiveness which makes the speedof the cut even 2x faster! The Dremel 8200does it all better. Cordless.


3 LED battery gaugeto monitor battery power.

Separate on/off switch with collet lock-out functionprevents from accidentally activating the colletlock.

Slide speed switchfor full variable speed control up to 30.000RPM.

Soft gripfor comfortable handling.

Compact and powerful 10.8V Li-ionbattery with 1 hour charging time.

High power 36mm electric motorfor all your high demanding cutting jobs andmore.

Motor brakestops spinning of the accessory immediately.


DREMEL 8200 (8200-1/35)

This kit includes the high performance 8200Li-Ion cordless multitool, with features likethe EZ Twist nose cap, collet lock outfunction, a motor brake and a RPMbandwidth of 5.000 to 30.000. The kitincludes the Detailer's Grip attachment foroptimal tool control. Next to thisattachment the kit includes a 1-hourbattery charger and 35 original Dremelaccessories including EZ SpeedClic.

Contents


Dremel 820035 high quality Dremel accessoriesDetailers Grip attachment1-Hour battery chargerInstruction manualSoft bag



191

Grinding/sharpening

541(2) 83322 932

Cleaning/polishing

404 429(2) 414(2) 421

Cutting

SC456(2)

540(3)

Sanding

432(2) 408(3) 413(5) 411(5) 407


402 401 SC402

31

DREMEL 8200 (8200-2/45)

This Dremel kit is the premium offer in thecordless multitool range. The highperformance 8200 Li-ion cordless multitoolwith EZ Twist nose cap, comes in a practicalcarrying case which contains a 1-hourbattery charger, the Shaping Platformattachment, allowing you to sand or grindperfectly at 90 and 45, the Line & CircleCutter attachment and 45 original Dremelaccessories including EZ SpeedClic. Withthis supreme kit even the most demandingcraftsman will be satisfied.

Contents


Dremel 820045 high quality Dremel accessoriesShaping platform attachmentLine & Circle Cutter1-Hour battery chargerInstruction manualSpacious and sturdy storage case



191

Grinding/sharpening

952 85602

Cleaning/polishing

421 414(2) 429(2) 403

Cutting

561(2) SC456(5)

540(5)

Sanding

413(4) 438(3) 431(2) 430 432(3) 408(2) 407 411(4)


SC402 402 401 150


DREMEL 8200 Platinum Edition(8200-5/65)

New

The Dremel 8200 Platinum Edition is theultimate Dremel cordless multitool kit.Besides the top of the line Dremel 820010.8V Li-ion powered tool you get a secondBattery Pack, 5 useful attachments and 65genuine Dremel accessories all packed in ahigh quality aluminum tool case.

Contents

Order information Ordernumber: F0138200KN EAN: 8710364066254

Dremel 820065 high quality Dremel accessories2x 10.8V Battery pack (875)Detailer's Grip attachment (577)Line & Circle Cutter attachment (678)Multipurpose Cutting Guide attachment (565)Shaping Platform attachment (576)Comfort Guard attachment (550)Instruction manual



107 191

Grinding/sharpening

83142 932 541

Cleaning/polishing

414(3) 429(3) 404 421

Cutting

420(20) SC456(2)

560 561

Sanding

407 408(3) 432(4) 411(7) 413(7) 511S(2)


401 402 SC402 150

35


Dremel has created a range of multi tool accessories to suit all your needs, including theEZ SpeedClic system to change your accessories quick, easy and keyless. To help youselect the right accessories, Dremel has created a colour coding system: every colourrepresents a category of applications. No matter which materials you want to work with,Dremel has a solution for you.

DREMEL EZ SpeedClic Dremel, the inventor of the Multitool, nowbrings you EZ SpeedClic - an innovation thatmakes changing cut-off wheels quick andeasy. Through a patented mandrel and wheeldesign, Dremel has found a way that enablesyou to change your accessory in 3 simplesteps - Pull, Click, Twist - without using anytools.

Carving / Engraving /Routing

Dremel offers high quality carving, engravingand routing accessories for many differentapplications. Their sharpness and durabilityallow them to last a long time.

Grinding / Sharpening The accessories in this category can deburr,smooth, grind and clean a variety ofmaterials in any kind of job.

Cleaning / Polishing Dremel cleaning and polishing accessoriesinclude brushes, felt accessories and rubberpoints to work on steel, aluminium, brass,silver, gold and plastics.

Cutting Dremel provides two types of cuttingaccessories for any cutting job; Cut-offwheels and cutting bits. Cut-off wheels cutmetal,wood and plastic along their edge.Cutting bits are used with the Dremel cuttingguide and cut in any direction.

Sanding Dremel sanding accessories include sandingdrums, bands, discs, flapwheels andabrasive buffs to remove and smoothenmaterial.



Collets / Mandrels /Miscellaneous

This category features the miscellaneousextras, like drill bits, collets, mandrels and amulti-chuck.

37

DREMEL EZ SpeedClic

EZ SpeedClic

Dremel, the inventor of the Multitool, now brings you EZ SpeedClic - aninnovation that makes changing cut-off wheels quick and easy. Through apatented mandrel and wheel design, Dremel has found a way that enables youto change your accessory in 3 simple steps - Pull, Click, Twist - without usingany tools.

Overview of the full range of EZ SpeedClic accessories:

SC541 423S SC406/SC456/SC456B SC409

SC476 SC544 SC545 471S

472S 473S 511S 512S

SC407 SC411 SC413



1. High Speed Cutters

114 115 117 118 125 134 144 192 193 194 196 199

High speed cutters can be used for shaping, hollowing, grooving, slotting,making tappered holes in soft metals, plastics and woods.

Plastic Plexi

Model Quantity Working mmShank mm Ordernumber EAN

114 2 7,8 3,2 26150114JA 8710364044702115 2 7,8 3,2 26150115JA 8710364044641117 2 6,4 3,2 26150117JA 8710364044672118 2 3,2 3,2 26150118JA 8710364044689125 2 6,4 3,2 26150125JA 8710364044696134 2 7,2 3,2 26150134JA 8710364044719144 2 7,8 3,2 26150144JA 8710364044726192 2 4,8 3,2 26150192JA 8710364044733193 2 2,0 3,2 26150193JA 8710364044740194 2 3,2 3,2 26150194JA 8710364044658196 2 5,6 3,2 26150196JA 8710364044665199 2 9,5 3,2 26150199JA 8710364044757

2. Engraving Cutters

105 106 107 108 110 111 113

Quality cutters for detail engraving, carving, routing in wood, fiberglass, plasticand soft metals.

Plastic Plexi


105 3 0,8 3,2 26150105JA 8710364044764106 3 1,6 3,2 26150106JA 8710364044771107 3 2,4 3,2 26150107JA 8710364044788108 3 0,8 3,2 26150108JA 8710364044795110 3 1,9 3,2 26150110JA 8710364044801111 3 0,8 3,2 26150111JA 8710364044818113 3 1,6 3,2 26150113JA 8710364044825

39


3. Diamond Wheel Points

7103 7105 7122 7134 7144

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use onwood, jade, ceramic, glass, hardened steel, semi-precious stones and otherhard materials. Bits are covered with diamond particles.

Cu Ag Plastic


7103 2 2,0 3,2 26157103JA 87103640448327105 2 4,4 3,2 26157105JA 87103640448497122 2 2,4 3,2 26157122JA 87103640448567134 2 2,0 3,2 26157134JA 87103640448637144 2 2,4 3,2 26157144JA 8710364044870

4. Tungsten Carbide Cutters

9901 9903 9905 9910 9911

Use for shaping, smoothing and material removal. Use on hardened steel,stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoodsand other hard materials.

Al Plastic


9901 1 3,2 3,2 2615990132 87103640086059903 1 3,2 3,2 2615990332 87103640086299905 1 3,2 3,2 2615990532 87103640086439910 1 3,2 3,2 2615991032 87103640086749911 1 3,2 3,2 2615991132 8710364008681



5. Structured Tooth Tungsten Carbide Cutters

9931 9934 9936

Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood,plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile.

Al Plastic


9931 1 6,4 3,2 2615993132 87103640085449934 1 7,8 3,2 2615993432 87103640085759936 1 19,0 3,2 2615993632 8710364008599

6. Router Bits (HSS)

612 615 640 650 652 654 655

For routing, inlaying and mortising in wood and other soft materials. Use withDremel Router Attachment 335 or Shaper/Router Table 231.

Plastic Plexi


612 1 9,5 3,2 2615061232 8710364008254615 1 9,5 3,2 2615061532 8710364008285640 1 6,4 3,2 2615064032 8710364008308650 1 3,2 3,2 2615065032 8710364007417652 1 4,8 3,2 2615065232 8710364008315654 1 6,4 3,2 2615065432 8710364008322655 1 8,0 3,2 26150655JA 8710364023042

41


1. DREMEL EZ SpeedClic Grinding Wheel

SC541

The Dremel SC541 Grinding Wheel is ideal for grinding and deburring differenttypes of metal. Because of the glass fibre reinforced 38mm diameter wheel youcan grind faster and more efficiently. The EZ SpeedClic system enables quick,easy and keyless accessory change.

Al Cu Ag


SC541 2 38,0 3,2 2615S541JA 8710364054879

2. Aluminum Oxide Grinding Stones

932 952 953 997 8153 8193 8215

Use on metals, castings,welded joints, rivets and rust. Ideal for sharpening,deburring and general purpose grinding of most materials.

Al Cu Ag


932 3 9,5 3,2 26150932JA 8710364044887952 3 9,5 3,2 26150952JA 8710364044894953 3 6,4 3,2 26150953JA 8710364044900997 3 3,4 3,2 26150997JA 87103640449248153 3 4,8 3,2 26158153JA 87103640449318193 2 15,9 3,2 26158193JA 87103640449178215 1 25,4 3,2 2615821532 8710364008148



3. Silicon Carbide Grinding Stones

83322 84922 85422 85602

Designed to work well on stone, glass, ceramics, porcelain and non-ferrousmetals.

Cu


83322 3 3,2 3,2 26153322JA 871036404494884922 3 4,8 3,2 26154922JA 871036404495585422 1 19,8 3,2 2615542232 871036401685385602 3 10,3 3,2 26155602JA 8710364044979

4. Abrasive Points

516

Use for finishing work and light deburring. For paint and rust removal withoutremoving any of the base material.

Al Cu Ag


516 1 13,0 3,2 2615051632 8710364015238

43


5. Chainsaw Sharpening Grinding Stones

453 454 455 457

Precision ground for quick, easy sharpening of chain saw blades. Use withDremel Chainsaw sharpening attachment No. 1453


453 3 4,0 3,2 26150453JA 8710364044986454 3 4,8 3,2 26150454JA 8710364044993455 3 5,6 3,2 26150455JA 8710364045006457 3 4,5 3,2 26150457JA 8710364045013



1. Rubber Polishing Points

462

Blue points for finishing and polishing all ferrous metals. Removes small burrsand scratch marks left by grinding and sanding, and cleans and definesgrooves. Also effective on many stones and ceramics.


462 3 6,4 3,2 26150462JA 8710364045020

2. DREMEL EZ SpeedClic: Polishing Cloth Wheel

423S

This wheel is ideal for polishing metals and plastics. Can also be used withmandrel 402. Quick, Easy, Keyless.

Al Cu Ag Plastic Plexi


423S 1 25,0 3,2 2615S423JA 8710364037124

45


3. Impregnated Polishing Wheel

520

Impregnated polishing wheel for light stock removal and high luster polishing.Works on various surfaces like steel, aluminium, brass, silver, gold, hard plasticetc. The polishing wheel is impregnated with a silicon carbide abrasive andcooling lubricant, so polishing compound is not needed.

Cu Ag Plastic


520 1 13,2 3,2 2615052065 8710364023035

4. Polishing Wheels

414 421 422 425 429

Ideal for polishing metals and plastics. Using polishing compound no. 421 withwheels produces a high luster. Use 414, 422 and 429 with mandrel 401. Use 425with mandrel 402.



414 6 13,0 3,2 2615041432 8710364007141421 1 2615042132 8710364008452422 4 10,0 3,2 26150422JA 8710364045051425 4 22,5 3,2 26150425JA 8710364045075429 3 26,0 3,2 26150429JA 8710364045044



5. Bristle Brushes

403 404 405

Use for light deburring, cleaning, polishing of silverware, jewelry and otherprecious metals. Can be used with polishing compound (421).

Al Cu Ag


403 1 19,0 3,2 2615040332 8710364007127403 2 19,0 3,2 26150403JA 8710364070329404 1 13,0 3,2 2615040432 8710364007134404 2 13,0 3,2 26150404JA 8710364070336405 3 3,2 3,2 26150405JA 8710364045082

6. Carbon Steel Brushes

428 442 443

Versatile brush for removing rust and corrosion, polish metal surfaces, deburrand blend surface junctures or clean electrical components.

Al Cu Ag


428 1 19,0 3,2 2615042832 8710364007196428 2 19,0 3,2 26150428JA 8710364070343442 1 13,0 3,2 2615044232 8710364007202442 2 13,0 3,2 26150442JA 8710364070350443 3 3,2 3,2 26150443JA 8710364045099

47


7. High-Performance Abrasive Brush

538

High performance abrasive brush for deburring, cleaning, rust and corrosionremoval. Can be used at higher speed than other brushes (max. 20.000 RPM)

Al Cu Ag


538 1 26,0 3,2 26150538JA 8710364023066

8. Stainless Steel Brushes

530 531 532

Stainless steel brushes do not cause after rust when used on corrosive-resistant materials like pewter, aluminum and stainless steel.

Al Cu Ag


530 1 19,0 3,2 2615053032 8710364010561530 2 19,0 3,2 26150530JA 8710364070367531 1 13,0 3,2 2615053132 8710364010578531 2 13,0 3,2 26150531JA 8710364070374532 3 3,2 3,2 26150532JA 8710364045105



9. Brass Brushes

535 536 537

Brass brushes are non-sparking and softer than steel.They will not scratch softmetals like gold, copper, brass.

Al Cu Ag


535 1 19,0 3,2 2615053532 8710364010530535 2 19,0 3,2 26150535JA 8710364070381536 1 13,0 3,2 2615053632 8710364010547536 2 13,0 3,2 26150536JA 8710364070398537 3 3,2 3,2 26150537JA 8710364045112

49

Cutting

1. DREMEL EZ SpeedClic: Starter Set and Cutting Wheels

SC406 SC409 SC456 SC456B

Dremel, the inventor of the EZ SpeedClic quick-change system for rotary toolaccessories, now offers an extended line of EZ SpeedClic metal cuttingaccessories. The Starter Set SC406 includes the unique EZ SpeedClic mandreland two fiberglass reinforced metal cutting wheels. The SC456, SC456B andSC409 are replacement metal cutting wheels, whereby the SC409 wheels have athickness of just 0,75 mm.

Al Cu Ag


SC406 2 38,0 3,2 2615S406JC 8710364042814SC409 5 38,0 3,2 2615S409JB 8710364042869SC456 5 38,0 3,2 2615S456JC 8710364042821

SC456B 12 38,0 3,2 2615S456JD 8710364042845

2. DREMEL EZ SpeedClic: Plastic Cutting Wheels 5-Pack

SC476

These cutting wheels are specially designed for cutting in all sorts of plastics.Quick, Easy, Keyless.

Plastic Plexi


SC476 5 38,0 3,2 2615S476JB 8710364042852


Cutting

3. DREMEL EZ SpeedClic: Wood Cutting Wheel

SC544

Cut faster through wood. With this 38 mm EZ SpeedClic wood cutting wheel544 you can cut both hard and soft types of wood and also laminate. The carbidecoating makes this wheel very durable. Quick, Easy, Keyless.


SC544 1 38,0 3,2 2615S544JB 8710364042876

4. DREMEL EZ SpeedClic: Diamond Cutting Wheel

SC545

A unique accessory designed for cutting hard materials. For example concrete,stone, porcelain, ceramic and hard epoxies. The diamond wheel produces a finecut, is extremely durable, does not break and retains it shape. Quick, Easy,Keyless.


SC545 1 38,0 3,2 2615S545JB 8710364042883

51

Cutting

5. Cut-Off Wheels

409 420 426 540

For slicing and cutting in metal,wood and plastic. Cut-off wheels make it easy tocut or slot bolts, screws, sheet metal, thin wood and plastic. Fiberglassreinforced cut-off wheels (456, 426, 426B) are for tough applications. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes.Use Dremel cut-off wheels with mandrel 402.

Al Cu Ag Plastic


409 36 24,0 3,2 2615040932 8710364007424420 20 24,0 3,2 2615042032 8710364007431426 5 32,0 3,2 2615042632 8710364007448540 5 32,0 3,2 2615054032 8710364010516

6. Cutting/Shaping Wheel

542

The ultimate solution for wood. The special design of the cutting/shaping wheel542 ensures that you can cut both hard and soft types of wood, cut grooves andshape wood. The carbide coating makes the wheel especially durable.


542 1 25,4 3,2 2615054265 8710364017119


Cutting

7. Rip/Cross-Cut Blade

546

Precision saw blade for fine, clean and straight cuts in all sorts of wood. Perfectfor laminate and wood flooring or thin wood plates. Use only with Dremel MiniSaw attachment 670. Made of carbon steel, 48 offset teeth guarantee precise,fast cuts up to 6.35 mm.


546 2 31,8 3,2 26150546JB 8710364045143

8. Spiral Cutting Bits

561 562

The multipurpose cutting bit 561 cuts wood, plastic, fiberglass, drywall, laminate& vinyl siding. The tile cutting bit 562 cuts ceramic wall tile, cement board andplaster. (Not for use on floor tile)

Plastic Plexi


561 3 3,2 3,2 26150561JA 8710364045150562 1 3,2 3,2 2615056232 8710364010608

53

Cutting

9. Grout Removal Bits

569 570

Ideal for cleaning wall and floor grout or removing grout to replace broken tiles.Use with the Dremel Grout Removal attachment 568.


569 1 1,6 3,2 2615056932 8710364014125570 1 3,2 3,2 2615057032 8710364016624


Sanding

1. DREMEL EZ SpeedClic: Detail Abrasive Brushes

471S 472S 473S

The Detail Abrasive Brushes have very flexible bristles which allow removal of theexterior surface layer without damaging the base layer below. This can beused for deburring, cleaning, finishing, and polising of detailed parts, tiny areasand irregular places.

Al Cu Plastic

Model Quantity Working mmShank mm Grit Ordernumber EAN

471S 1 25,0 3,2 36 2615S471JA 8710364050314472S 1 25,0 3,2 120 2615S472JA 8710364050321473S 1 25,0 3,2 220 2615S473JA 8710364050338

2. DREMEL EZ SpeedClic: Abrasive Buffs

511S 512S

511S: 1x Finishing abrasive buff medium + 1x course. 512S: 2x Finishing abrasivebuffs fine. For precise and delicate material removal on metal, glass, wood andplastic. The flexible material enables to work on tight and irregularly shapedareas. These buffs can be used with mandrels 402 as well as SC402. EZSpeedClic. Quick, Easy, Keyless.

Cu Plastic


511S 2 25,0 3,2 180 /280 2615S511JA 8710364037100

512S 2 25,0 3,2 320 2615S512JA 8710364037117

55

Sanding

3. DREMEL EZ SpeedClic: Sanding Discs

SC411 SC413

The EZ SpeedClic Sanding Discs are great for light sanding and shaping. Thediscs are available in 60 and 240 grit with a diameter of 30mm and arecompatible with the SC402 mandrel. Change discs without using a wrench! TheEZ SpeedClic sanding discs last 2x longer and remove 2x more material than theDremel 411 and 413 sanding discs. Quick, Easy, Keyless.

Al Cu Plastic


SC411 6 30,0 3,2 60 2615S411JA 8710364060917SC413 6 30,0 3,2 240 2615S413JA 8710364060931

4. DREMEL EZ SpeedClic: Sanding Mandrel & Sanding Band

SC407

The EZ SpeedClic sanding mandrel & sanding band are ideal for quick materialremoval. The quick change EZ SpeedClic mandrel enables fast sanding bandchange. Pull, Place, Push.

Al Cu Ag Plastic


SC407 3 13,0 3,2 60 /120 2615S407JA 8710364060948


Sanding

5. Sanding Bands

408 430 431 432 438

For rough shaping and smoothing wood and fiberglass, removing rust frommetal surfaces and shaping rubber surfaces. Sanding bands are easilyreplaceable.



408 6 13,0 3,2 60 2615040832 8710364007233430 2 6,4 3,2 60 26150430JA 8710364045167431 6 6,4 3,2 60 2615043132 8710364007257432 6 13,0 3,2 120 2615043232 8710364007264438 6 6,4 3,2 120 2615043832 8710364007271

6. Flapwheels

502 504

Perfect for sanding flat or contoured surfaces on metal,wood, rubber or plastic.



502 1 28,6 3,2 80 2615050232 8710364015252504 1 28,6 3,2 80 2615050432 8710364015269

57


1. Glass Drilling Bits

662 663

The Dremel Glass Drilling Bits are ideal for cutting holes in glass.


662 1 3,2 3,2 26150662JA 8710364054541663 1 6,4 3,2 26150663JA 8710364054558

2. Collets

4485

Collets offer the most precise way to hold an accessory in a multitool. The colletkit 4485 is an assortment of the different available collets (0,8 / 1,6 / 2,4 / 3,2mm) including a collet nut.


4485 1 2615448532 8710364007592



3. Multi Chuck

4486

The Dremel multi chuck (4486) allows you to quickly and easily changeaccessories on your Dremel multitool without using collets. It acceptsaccessories from 0,4mm to 3,4mm shank. Not compatible with the Dremel4200.


4486 1 2615448632 8710364012978

4. Mandrels

401 402 SC402

Mandrels are used to mount different accessories, like felt polishing wheels orcut-off wheels. SC402 Mandrel for the EZ SpeedClic accessories. Quick, Easy,Keyless.


401 3 3,2 26150401JA 8710364045068402 4 3,2 26150402JA 8710364045198

SC402 1 3,2 2615S402JB 8710364042838

59


5. Precision Drill Bit Set (7 pcs) (628)

628

The Dremel precision drill bit set (628) contains 7 drill bits for drilling into woodor soft metal. The different diameters included are 0,8 / 1,2 / 1,6 / 2,0 / 2,4 / 2,8and 3,2 mm. Not compatible with the Dremel 4200.

Plastic Plexi


628 7 2615062832 8710364009381

6. Wood Drill Bit Set

636

The Dremel wood drill bit set contains 4 drill bits with centering point for drillinginto wood. The different drilling diameters included are 3, 4, 5 and 6 mm. Thetitanium coating offers high performance and longer lifetime.


636 4 3,2 26150636JA 8710364026289


Accessory Kits

100 Piece Multipurpose Modular Accessory Set (720)

This 100 piece Multipurpose DremelAccessory Set contains a basiccollection of genuine Dremelaccessories (including EZ SpeedClic)which are packed in a high qualitystorage case. This modular storagecase can be connected to similarDremel storage cases, to create andexpand your own storage system.

Order information Ordernumber: 26150720JA EAN: 8710364050758



191

Grinding/sharpening

932 541(4) 83322 83142

Cleaning/polishing

421 404 429(4) 414(8)

Cutting

409(36) SC456(2)

Sanding

413(10) 411(10) 432(8) 408(7) 407


150 401 402 SC402

61

Accessory Kits

165 Piece Multipurpose Modular Accessory Set (722)

This 165 piece Multipurpose DremelAccessory Set contains an extendedcollection of genuine Dremelaccessories (including EZ SpeedClic).With accessories from all categories,this set gives you the ability to work onnumerous different projects andmaterials with your Dremel. Theseaccessories are packed in two highquality storage cases. These modularstorage cases can be connected tosimilar Dremel storage cases, to createand expand your own storage system.




191

Grinding/sharpening

85602 541(5) 997 84922 932

Cleaning/polishing

428 404 422(2) 414(10) 429(6) 421

Cutting

409(36) SC456(2)

420(20) 456(2)

Sanding

411(16) 438(10) 431(9) 407 430 413(16) 432(10) 408(9)


402 401 SC402 150


Accessory Kits

Woodworking Modular Accessory Set (730)

This Dremel Wood Working Setcontains a special selection of genuineDremel accessories (including EZSpeedClic); all you need for all yourwood working projects. It also includestwo attachments: Shaping Platform(for excellent control when sanding)and Detailer's Grip (for increasedcontrol), especially designed withwood working in mind. The accessoriesand attachments are packed in twounique and connectable modularstorage cases. These modular storagecases can be connected to similarDremel storage cases, to create andexpand your own storage system.




193 191 107 110 113 115

Sanding

430 411(10) 413(10) 431(11) 438(12) 407 408(11) 432(12) 511S(2) 504


SC402 481

Included Attachments

IncludedAttachments

576 577

63

Accessory Kits

Cutting & Grinding Modular Accessory Set (731)

This Dremel Cutting & Grinding Setcontains the most popular Dremelcutting & grinding accessories(including EZ SpeedClic) and twouseful attachments: Line & CircleCutter and Cutting Guide, perfect forall your cutting & grinding jobs inmetal, stone and plastic. Theaccessories and attachments arepacked in two unique and connectablemodular storage cases. These modularstorage cases can be connected tosimilar Dremel storage cases, to createand expand your own storage system.



Grinding/sharpening

997 8215 932 85602 84922 541(4)

Cutting

562 420(20) SC476(2)

SC456(3)

561


402 SC402

Included Attachments

IncludedAttachments

678 565


Accessory Kits

EZ SpeedClic Accessory Set (SC690)

Assortment of 10 EZ SpeedClic cuttingwheels and the special EZ SpeedClicmandrel. Besides 6 regular 38 mmmetal cutting wheels the kit includes 2special thin cutting wheels and 2unique plastic cutting wheels. EZSpeedClic is the unique quick-changesystem for rotary tool accessories. EZSpeedClic. Quick, Easy, Keyless.

Order information Ordernumber: 2615S690JA EAN: 8710364045839


Cutting

SC409(2)

SC456(6)

SC476(2)


SC402

65

Accessory Kits

Cleaning / Polishing Set (684)

All you need for cleaning and polishingin a convenient box. Removableaccessory tray and 3 dividers provideperfect storage solution. Dremel QuickStart leaflet explains the includedaccessories.



Cleaning/polishing

403 404 405 428 520 414(6) 421 422 425(2) 429(3)


401 402


Accessory Kits

Multipurpose Set (687)

Assortment of best selling accessoriesin a convenient box. Removableaccessory tray and 3 dividers provideperfect storage solution. Dremel QuickStart leaflet explains the includedaccessories.




194

Grinding/sharpening

85422 952

Cleaning/polishing

429(2) 414(2) 403 421

Cutting

409(36) 426

Sanding

407 408 432(2)


401 402

67

Accessory Kits

Cutting Set (688)

Assortment of 68 cut-off wheels in aconvenient box. Removable accessorytray and 3 dividers provide perfectstorage solution. Dremel Quick Startleaflet explains the includedaccessories.



Cutting

409(36) 420(24) 426(3) 540(5)


402

69

Multitool Attachments

The Dremel attachments expand the usability of your multitool, so you can do your jobwith even more precision and ease. Dremel offers attachments to rout, control, cut, saw,sharpen and to reach.

Attachments toControl

DREMEL Workstation (220)DREMEL Shaping Platform Attachment(576)DREMEL Detailer's Grip Attachment (577)Flex-Shaft Tool Holder (2222)DREMEL Multi-Vise (2500)

Attachments toCut

Multipurpose Cutting Kit (565)Wall Tile Cutting Kit (566)Wall & Floor Grout Removal Kit (568)Line & Circle Cutter (678)

Attachments toReach

Flexible Shaft (225)Right Angle Attachment (575)

Attachments toRout

Shaper / Router Table (231)Plunge Router Attachment (335)

Attachments toSaw

Mini Saw Attachment (670)

Attachments toSharpen

Chainsaw Sharpening Attachment (1453)


DREMEL Workstation (220)

This is the perfect solution forstationary working with your Dremel.

Drill vertically or in an angle, adjustablein increments of 15 degrees.

Holds tool horizontally for polishing andsanding.

Integrated, telescoping tool standholds tool with Flex Shaft (225).

On-board accessory storage. Cord management keeps cord safely

stowed. Depth markings for consistent depth

adjustment. Base markings (metric and inches).

Contents

Combined Drill Press and Tool Holder

Order information Ordernumber: 26150220JB EAN: 8710364032426

DREMEL Shaping Platform Attachment (576)

The Dremel Shaping Platform enablesyou to sand and grind at perfect 90 and45 degree angles. With the includedsanding mandrel, sanding band andgrinding stone you can start workingstraight away.

Contents

407 Sanding Mandrel and Band932 Grinding StoneShaping Platform Attachment



71

DREMEL Detailer's Grip Attachment (577)

The Dremel Detailer's Grip attachmentenables you to have even better controlof your multitool when doing DIY, hobbyand craft projects. With the includedstencil template and engraving cutteryou can begin working with thedetailers Grip attachment and yourmultitool straight away.

Contents

Detailer's Grip AttachmentStencil Template107 Engraving Cutter481 Collet 2.4 mm


Flex-Shaft Tool Holder (2222)

Conveniently suspends your Dremelmultitool above your workbench.

Perfect for use with the Flexible Shaftattachment.

Clamps to workbenches up to 42 mmthick, and adjusts in height from 300 to1070 mm.

Store extra bits on base.

Contents

Flex-Shaft Tool Holder

Order information Ordernumber: 2615222232 EAN: 8710364016822



DREMEL Multi-Vise (2500)

The Dremel 3-in1 Multi-Vise. Stationaryvise, stand alone clamp & Toolholder.

Clamps to any workbench, table orcountertop

Rotates 360 and tilts 50. Allowsapproaching the workpiece from acomfortable angle.

Jaws may be used with base unit ordetached for use as a stand-alone barclamp.

Easily accommodates larger work pieces. Stabilises oversize objects and protect

delicate pieces from damage. Allows round and odd-shaped objects to

be held securely. Allows quick removal of objects from jaws. Resists twisting and bowing for solid

stability.

Contents

Dremel Multi-ViseRemovable soft-padsTool holder adapter



73

Multipurpose Cutting Kit (565)

Provides controlled cutting in a varietyof materials.

Easily attaches to your Dremel tool. Easy depth adjustment up to 19 mm

material thickness.

Contents

Cutting Guide2 Drywall Cutting Bits 5601 Multipurpose Cutting Bit 561


Wall Tile Cutting Kit (566)

Provides controlled cutting in ceramicwall tiles.

Easily attaches to your Dremel tool. Easy depth adjustment up to 19 mm

material thickness.

Contents

Cutting Guide1 Tile Cutting Bit 562 (not for use onceramic floor tiles)


Attachments to Cut


Wall & Floor Grout Removal Kit (568)

Specially developed for removing groutfrom between wall and floor tiles.

The risk of chipping your tiles is greatlyreduced compared with manualchiselling.

Easy depth adjustment. Guide keeps bit centered between

tiles. For compatibility with the Dremel 4200

please check the compatibilityoverview on the rear of the packaging.

Contents

Angled Cutting Guide1.6 mm Grout Removal Bit 569


Line & Circle Cutter (678)

Makes perfect holes and straight cuts Easily connects to your Dremel tool Included cutting bits are perfect for

cuts in drywall, wood and laminate Maximum cutting diameter is 30 cm

Contents

Circle cutterStraight edge guide1 Multipurpose cutting bit 561


Attachments to Cut

75

Flexible Shaft (225)

Ideal attachment for precise, detailedwork or hard to reach places.

Comfort grip handpiece allowsfingertip control to cut, grind, sand,polish and more.

Integrated shaft lock button for quickand easy accessory changes.

127 mm bend radius provides morecomfort and flexibility during use.

Quick connect attaches your Dremeltool in seconds.

Contents

Flexible Shaft - length 1070 mmDriver Cap


Right Angle Attachment (575)

Designed to use accessories in rightangle for hard to reach places.

Ball bearings and bevel gears providesmooth and cool operation andguarantee longer lifetime.

Coupling system allows to place theattachment in 12 different directions onyour Dremel tool.

Quick connect attaches your Dremeltool in seconds.

Contents

Right Angle AttachmentDriver Cap


Attachments to Reach


Shaper / Router Table (231)

Converts your Dremel tool into a benchmounted tool for precise routing,shaping and sanding.

Plastic knobs for easy tool assemblyand depth adjustment.

Smooth table surface to slide yourworkpiece easily over the table.

Slot, groove, sand and trim edges. 3-way adjustable fence for accurate

working result. Worktable 203 x 152 mm. Adjustable, transparent router bit guard

enables safe working.

Contents

Shaper/Router Table


Plunge Router Attachment (335)

Converts your Dremel tool into aplunge router to rout circles, signs andinlay work, decorative edges and torout parallel to an edge.

Plunge-lock in handle - simply turnhandle to lock/unlock.

Two depth stops for quick, consistentadjustment of depth.

Edge guide and circle guide to routstraight lines and perfect circles.

Guide bushing set for letter and patterntemplate routing.

Contents

Plunge Router AttachmentEdge GuideCircle GuideGuide Bushing SetWrench


Attachments to Rout

77

Mini Saw Attachment (670)

Transforms your Dremel tool into aprecision circular saw for fine, clearand straight cuts in all sorts of wood.

Perfect for laminate and wood flooringor thin wood plates.

The safety guard and lower guard makeit safe to use the circular saw blade.

The guide allows to make straight cuts. Quick connect attaches your Dremel

tool in seconds. This Mini SawAttachment is easier to

use than a hand saw, more precisethan a jig saw and fits in tighter spacesthan a circular saw.

Contents

Mini SawAttachmentRip/Cross-Cut Blade (546)Driver Cap


Attachments to Saw


Chainsaw Sharpening Attachment (1453)

The fastest, easiest way to sharpendull, slow-cutting chain saws.

Easily attaches to your Dremel tool. Works with a variety of different chain

sizes. For compatibility with the Dremel 4200

please check the compatibilityoverview on the rear of the packaging.

Contents

Sharpening Angle GuideAdjustment GaugeChainsaw Sharpening Grinding Stones

Order information Ordernumber: 26151453PA EAN: 8710364021499

Attachments to Sharpen

81

Compact Tool System

Next to the Multitool System, Dremel has developed other Versatile Tool Systems thathelp you see your project through to completion. The systems that can be found in thiscategory either bridge the gap between the very detailed tasks and the traditional DIYjobs, or surround a certain type of project category, like engraving, gluing or soldering.These tools are typically more compact than traditional DIY tools and use their own uniqueaccessories and attachments to ensure the best results.

DSM20 System DREMEL DSM20DSM20 AccessoriesDSM20 Attachments

Multi-Max System DREMEL Multi-Max 8300DREMEL Multi-Max MM20DREMEL Multi-Max MM40Multi-Max AccessoriesMulti-Max Attachments

TRIO System TRIO Accessories

Glue Gun System DREMEL Glue Gun 910DREMEL Glue Gun 940Glue sticks

VersaTip System DREMEL VersaTipButane Tool Accessories

VersaFlameSystem

DREMEL VersaFlameButane Tool Accessories

Engraver System DREMEL EngraverEngraver Accessories


DREMEL DSM20


Weight 1,70 kgNo load speed 17.000 1/minVoltage 220 - 240 VRated power input 710 W

The Dremel DSM20 is the ultimatecompact saw with an excellent line ofsight. With its clear line of sight, powerfulmotor and use of abrasive wheels, this sawcan easily perform precise straight, plungeand flush cuts in materials up to 20mmthick. The product comes with a widevariety of non-intimidating abrasive cuttingwheels, which in combination with the dustextraction port allows for clean andaccurate work in wood, metal, plastics,stoneware and tiles. This kit includes threeattachments which help to enhance thecutting capabilities of the Dremel DSM20.Cutting parallel to the edge of the work issimple with the edge guide, while the 2x4cutting guide can be used to quickly andaccuratelly make cuts in 2x4 timber.Dremel DSM20 the ultimate cuttingsolution.


Excellent line of sightfor accurate cutting.

Abrasive wheel technologyfor straight cuts, plunge cuts and flush cuts inwood, metal, tile, plastic and masonry.

Worm drive gearingfor durability and power.

Powerful 710W motorfor tough applications.

Adjustable depth guidefor precision and control.

Dust extraction portfor clean working environment.

83

DREMEL DSM20 (DSM20-3/4)


Contents

Order information Ordernumber: F013SM20JA EAN: 8710364060726

Dremel DSM201x DSM500 Multipurpose Carbide CuttingWheel3x DSM510 Metal and Plastic Cutting WheelVacuum Cleaner AttachmentStraight Edge Guide2x4 Cutting GuideSturdy and spacious storage case


Cutting

DSM510(3)

DSM500


DSM20 Accessories

1. Cutting

DSM500 DSM600

DSM500: The DSM500 is a multipurpose carbide cutting disc. This abrasivecutting wheel with carbide grit is designed for doing straight and plunge cuts inwood and other soft materials. DSM600: The DSM600 is a multipurpose carbideflush cutting disc. This offset abrasive cutting wheel with carbide grit is designedto cut (straight, plunge and flush) wood and other soft materials.

Plastic Plexi


DSM500 1 20,0 2615S500JA 8710364060764DSM600 1 20,0 2615S600JA 8710364060818

2. Cutting

DSM510 DSM520 DSM540

DSM510: The DSM510 is a reinforced type 1 abrasive cutting wheel which isdesigned to cut a variety of materials such as metal and plastic. DSM520: TheDSM520 is a masonry cutting wheel. This reinforced type 1 abrasive cut-offwheel is intended to make cuts in masonry and stone. DSM540: The DSM540 is adiamond abrasive wheel which is designed for cutting hard materials such asmarble, concrete, brick, porcelain and ceramic tile.

Al Cu Plastic Plexi


DSM510 3 20,0 2615S510JA 8710364060771DSM520 2 20,0 2615S520JA 8710364060795DSM540 1 20,0 2615S540JA 8710364060801

85

DREMEL DSM20 Cutting Guide (DSM840)

This attachment helps to enhance thecutting capabilities of the DremelDSM20. Mitre, bevel and straight cutsare easily achieved in baseboard, trimor molding using the DSM840 CuttingGuide.

Contents

DSM840

Order information Ordernumber: 2615S840JA EAN: 8710364060825

DSM20 Attachments


DREMEL Multi-Max 8300


Battery voltage 10,8 VWeight 0,825 kgNo load speed 3.000 - 21.000 1/minCharging time 1 hBattery capacity 1,5 AhBattery technology Lithium-Ion / ECPOscillating Angle L / R 1.5

With the new Multi-Max, Dremel brings asuperior consumer experience to thecordless oscillating tool category. Theideal tool to repair, remodel and or restore.Its quick change accessory system allowsa fast change of accessory to suit anysituation, while the 2 batteries ensureenough endurance to tackle any (light) DIYand hobby task. Combined with superbergonomics, the Dremel Multi-Max is theoscillating tool for quick fixes and smallerrestorations projects. There areaccessories available for the Multi-Max tocut and sand wood, metal, plastic &drywall, grind cement & mortar andremove grout. Multi-Max, the mostcomfortable and user friendly oscillatingtool.


Ergonomic designcompact tool, soft grip area at front andbalanced weight for increased comfort

Smaller Accessoriesmore precise, longer battery lifetime, lowervibration and sound level

Quick fit change systemallows to change accessories quick and easy

One Hour Charger plus extra battery forreduced down time

3.000-21.000 RPM with smooth start foroptimal performance in differentapplications

10.8V Lithium-Ion Battery with ECPtechnology for optimal batteryperformance

Fuel Gauge indicating battery charge Separate On/Off Switch

maintains speed setting & provides easyaccess

87

DREMEL Multi-Max 8300 (8300-9)

The Dremel Multi-Max Kit contains the mostrelevant accessories focussing mainly onwood working applications while not leavingout other materials: The Hook and LoopSanding Pad along with the SandingPapers, the Wood and Metal Flush CutBlade and the Wood and Drywall Saw bladeare all included. This kit also includes 2x10.8V Li-Ion Batteries with ECP technologyfor longer working.

Contents


Dremel Multi-Max 8300Wood & Metal Flush Cut BladeWood & Drywall Saw BladeHook and Loop Pad6x Sanding Paper2x 10.8V Li-Ion 1.3Ah battery pack1 Hour ChargerInstruction manualSturdy and spacious storage case


Cutting

MM422 MM450

Sanding

MM70W(3)

MM11 MM70P(3)




Weight 1,35 kgNo load speed 10.000 - 21.000 1/minVoltage 220 - 240 VBattery technologyRated power input 250 WOscillating Angle L / R 1.5

Dremel Multi-Max MM20 is an oscillatingtool with high performance motor andQuick-Fit accessory mechanism. Ideal toolto repair, remodel and restore. The MM20is capable of handling a wide range ofapplications including cutting in wood,plastic or metal, sanding wooden orpainted surfaces, scraping, grout removaland more. Dremel Multi-Max MM20 is themore powerfull oscillating tool for thefrequent user.


Faster and more efficient cutting250W high performance motor combined withelectronic feedback and soft start.

Precise working in different materials andapplications10,000-21,000 OPM variable speed.

Easy Accessory ChangeQuick Fit Accessories.

Comfortable Handlingergonomic design and longer (2.1m) powercord.

89

DREMEL Multi-Max MM20(MM20-1/9)


Contents

Order information Ordernumber: F013MM20JA EAN: 8710364063727

Dremel Multi-Max MM201x Hook and Loop Sanding Pad (MM11)6x Sanding Paper (3x MM70P, 3x MM70W)1x Wood Flush Cut Blade (MM480)1x Wood & Metal Flush Cut Blade (MM482)Vacuum cleaner attachmentSturdy and spacious storage case


Cutting

MM482 MM480

Sanding

MM70W(3)

MM11 MM70P(3)




Weight 1,47 kgNo load speed 10.000 - 21.000 1/minVoltage 220 - 240 VBattery technologyRated power input 270 WOscillating Angle L / R 1.5

The Dremel Multi-Max MM40 is the bestperforming oscillating tool with QuickLock: quick and keyless accessory changemechanism. Equipped with electronicfeedback and soft start this best in classoscillating multitool can comfortablyhandle a wide range of applicationsincluding cutting in wood, plastic or metal,sanding wooden or painted surfaces,scraping, grout removal and more.TheDremel Multi-Max MM40 is the best inclass oscillating tool for the moredemanding jobs.


Keyless quick accessory changeQuick Lock accessory change interface.

Faster and more efficient cutting270W high performance motor combined withsoft start.

Maintains speed under loadelectronic feedback.

Precise working in different materials andapplications10000-21000 OPM Variable speed.

Comfortable Handlingergonomic design and longer (2.1m) powercord.

91

DREMEL Multi-Max MM40(MM40-1/9)


Contents

Order information Ordernumber: F013MM40JA EAN: 8710364063758

Dremel Multi-Max MM401x Quick Fit Hook and Loop Sanding Pad(MM14)6x Sanding Paper (3x MM70P, 3x MM70W)1x Wood Flush Cut Blade (MM480)1x Wood & Metal Flush Cut Blade (MM482)Vacuum cleaner attachmentSturdy and spacious storage case


Cutting

MM482 MM480

Sanding

MM14 MM70P(3)

MM70W(3)



1. Grinding

MM900 MM14

MM900: Diamond paper accessory for grinding cement, plaster or thin-setmortar. Requires MM11 or M14 Hook and Loop Pad accessory. For roughgrinding, shaping and smoothing of masonry, stone, cement and mortar.

Al Plastic


MM14 1 2615M014JA 8710364064243MM900 1 60 2615M900JA 8710364055296

2. Cutting

MM411 MM422 MM470 MM480 MM482

MM411: 10mm wood flush cutting blade used to make precise cuts to allow for installation offlooring or wall trim. MM422: 20mm metal flush cutting blade used to make precise cuts andplunge cuts. MM470: 19mm HCS wood flush cutting blade with long blade design for fast andprecise cutting. MM480: 32mm wood flush cutting blade with the ability to perform preciseplunge and flush cuts. MM482: 32mm metal flush cutting blade with the ability to performprecise plunge and flush cuts. Flush cut blades can be used in many different materials.

Al Plastic


MM411 1 10,0 2615M411JA 8710364055333MM422 1 20,0 2615M422JA 8710364055258MM470 1 19,0 2615M470JA 8710364055364MM480 1 32,0 2615M480JA 8710364064274MM482 1 32,0 2615M482JA 8710364064281

93


3. Cutting

MM430 MM435 MM450 MM501

MM430: The Multi-Knife offers users a powered push and pull cutting solution which caneasily cut through a variety of materials including; carpet, cardbord, outdoor turf, asphaltshingles and vinyl tile. MM435: The Jab Saw Blade offers users a powered cutting solutionwhich can easily perform straight, curved and plunge drywall cuts. MM450: Wood &Drywall Saw Blades are ideal for making precise cuts in wood, plaster and drywallmaterial. MM501: Grout removal blade for removing grout between wall and or floor tiles.

Plastic


MM430 1 2615M430JA 8710364064250MM435 1 2615M435JA 8710364064267MM450 1 75,0 2615M450JA 8710364055265MM501 1 1,6 2615M501JA 8710364055272

4. Cutting

MM721 MM722

MM721: Spiral Cutting Blades are used to do intricate and very detailed cuts andtrims. These blades can be used only with the MM720 Multi-Flex. MM722: FlatCutting Blades are used for general straight cutting of a variety of materials.These blades can be used only with the MM720 Multi-Flex.

Cu Plastic


MM721 3 2615M721JA 8710364056026MM722 3 2615M722JA 8710364056033



5. Sanding

MM14 MM70P MM70W

MM14: The Quick Fit Hook & Loop Pad accessory allows Multi-Max oscillatingtools to accept sand papers and diamond paper. MM70P: Sand paper accessoryto sand paint, varnish and filling compound on a variety of surfaces. RequiresHook and Loop Pad accessory. MM70W: Sand paper accessory for sandinghardwood, softwood, chipboard, rusted metal, fibreglass and plastics. RequiresMM11 or MM14 Hook and Loop Pad accessory.

Al Plastic

Model Quantity Working mm Grit Ordernumber EAN

MM14 1 2615M014JA 8710364064243MM70P 6 80 / 120 / 240 2615M70PJA 8710364055241MM70W 6 60 / 120 / 240 2615M70WJA 8710364055234

6. Miscellaneous

MM300 MM600

MM300: Multi-Max Universal Adapter allows all Multi-Max accessories to fit allcurrent oscillating tools in the market (Including Fein, Rockwell, Bosch,Craftsman, Mastercraft, and Masterforce).Not compatible with MM40. MM600:Rigid scraper for large area removal of harder materials such as vinyl flooring,carpeting and tile adhesives.


MM300 1 2615M300JA 8710364055357MM600 1 2615M600JA 8710364055319

95

DREMEL Multi-Max Multi-Flex (MM720)

First oscillating attachment in themarket designed for detailed cutting.The innovative design with the specialcutting blades ensures the widestcutting capability of all oscillating tools.Variety of blades allows for use inwood, metal, and plastic. Notcompatible with MM40.

Contents

Multi-Flex3 spiral cutting blades3 saw cutting blades

Order information Ordernumber: 2615M720JA EAN: 8710364055340

Multi-Max Attachments


TRIO Accessories

1. Routing

TR615 TR618 TR654

TR615: Dremel TRIO Corner Rounding Routing Bit for routing in wood and othersoft materials. TR618: Dremel TRIO Chamfer Router Bit for routing in wood andother soft materials. TR654: The Dremel TRIO Straight Router Bit for routing andinlaying in wood and other soft materials.

Plastic Plexi


TR615 1 9,5 4,8 2615T615JA 8710364053742TR618 1 9,5 4,8 2615T618JA 8710364053735TR654 1 6,5 4,8 2615T654JA 8710364053711

2. DREMEL TRIO Straight Router Bit Set (TR673)

TR673

A set of various size carbide straight router bits for routing and inlaying in wood.


TR673 3 12,7 / 6,3 /3,2 4,8 2615T673JA 8710364058006

97

TRIO Accessories

3. DREMEL TRIO Router Bit Set (TR675)

TR675

A set of various size special carbide router bits. These router bits have beenspecially engineered to work with the Dremel TRIO. Kit includes a beading, arabbet, a flush trim, a cove and a V-groove bit.


TR675 54,8 / 6,3 /6,3 / 6,3 /

12,74,8 2615T675JA 8710364058013

4. Cutting

TR562 TR563

TR562: The Dremel TRIO Wall Tile Cutting Bit cuts ceramic wall tiles, plaster andcement board easily. TR563: The Dremel TRIO Multipurpose Carbide Cutting Bitcuts wood, drywall, plastic, fiberglass, laminate and sheet metal. Carbide bitslast longer than traditional HSS bits.

Al Plastic Plexi


TR562 1 3,2 4,8 2615T562JA 8710364053704TR563 1 3,2 4,8 2615T563JA 8710364053698


TRIO Accessories

5. Sanding

TR407 TR408 TR432

TR407: TRIO Sanding Mandrel for rough shaping and smoothing wood and fibreglass,removing rust from metal surfaces and shaping rubber surfaces. Sanding bands areeasily replaceable. TR408: TRIO P60 Sanding Band for rough (Grit 60) shaping andsmoothing wood and fibreglass, removing rust from metal surfaces and shaping rubbersurfaces. TR432: TRIO P120 Sanding Band for fine (Grit 120) shaping and smoothingwood and fibreglass, removing rust from metal surfaces and shaping rubber surfaces.

Al Plastic Plexi


TR407 3 13,0 4,8 60 2615T407JA 8710364053667TR408 4 13,0 60 2615T408JA 8710364053643TR432 4 13,0 120 2615T432JA 8710364053650

99

DREMEL Glue Gun 910


Weight 0,24 kgHigh temperature 165 CVoltage 100 - 240 VGlue stick diameter 7 mm

The Dremel 910 is a high temperature(165 C) glue gun with a drip-controlprecision tip. Because of its compact sizeand good ergonomics (T-handle, stablebase, extendable stand) it is ideal for quicklight DIY jobs around the house, such asgluing ceramics, wood, plastics, glass,etc.

Suitable for 7mm glue sticks.


Drip controlto prevent dripping glue onto the project

High temperature setting (165 C)for usage with high melt glue sticks

Precision tipfor intricate gluing

Silicon nozzle sleevesto prevent from burning

Extendable plastic standto easily position glue gun in a stable way

Heat-up time of 5minsfor quick operation

Ergonomic T-handlea good tool balance makes operating the tooleasy and comfortable

Easy to push triggerlittle force needed to press the trigger forconstant flow of glue

Glue output +- 5g/min Suitable for 7 mm glue sticks


DREMEL Glue Gun 910 (910-3)


Contents


Dremel Glue Gun 9103x Dremel 7 mm Multipurpose High Temp GlueSticksInstruction manual


101

DREMEL Glue Gun 940


Weight 0,30 kgHigh temperature 195 CVoltage 100 - 240 VGlue stick diameter 11 mm

The Dremel 940 is a high temperature(195 C) glue gun with a drip-controlexchangeable tip. With its removable cordthe 940 can be used at any place withoutavailable power. Because of its goodergonomics (on/off switch, T-handle,stable base, extendable kickstand) andreplaceable tip it is ideal for light DIY jobsaround the house and outdoors, such asrepairing furniture, gluing wood, ceramics,etc.

Suitable for 11/12mm glue sticks.


Drip controlto prevent dripping glue onto the project

High temperature setting (195 C)for usage with high melt glue sticks

Silicon nozzle sleevesto prevent from burning

Extendable plastic kickstandto easily position glue gun in a stable way bypressing a button

Easy to push trigger handlelittle force needed to press the trigger forconstant flow of glue

Glue output 18 g/minfor more demanding gluing jobs

Ergonomic T-handle with softgripfor comfortable and easy operation

Power indicator lightshows if the tool is turned on

On-Off switchto manually turn the tool on and off

Removable cordto enable limited operation without power

Heat-up time of 5 minsfor quick operation

Suitable for 11/12 mm glue sticks


DREMEL Glue Gun 940 (940-3)


Contents


Dremel Glue Gun 9403x Dremel 11 mm Multipurpose High TempGlue SticksInstruction manual


103

Glue sticks

1. Multipurpose Glue Sticks (7 + 11 mm)

GG01 GG11

GG01: To be used with Dremel glue gun model 910 (165 C). Glues a variety ofmaterials, such as wood, plastics, ceramics, textile, etc. GG11: To be used withDremel glue gun model 940 (195 C). Glues a variety of materials, such as wood,plastics, ceramics, carton, textile, etc.

Model Quantity Length OperatingTemp. Ordernumber EAN

GG01 12 100 7 165-195 2615GG01JA 8710364052424GG11 12 100 11 165-195 2615GG11JA 8710364052479

2. Wood Glue Sticks (7 + 11 mm)

GG03 GG13

GG03: To be used with Dremel glue gun model 910 (165 C). To glue woodenmaterials. GG13: To be used with Dremel glue gun model 940 (195 C). To gluewooden materials.


GG03 12 100 7 165-195 2615GG03JA 8710364052448GG13 12 100 11 165-195 2615GG13JA 8710364052486

3. Glue Pad

GG40

A flexible heat resistant mat that can be used to catch excessive glue and tocreate decorative glue design patterns: allow glue to cool and peel it off easily.The pad is suitable for all types of melted glue.


GG40 1 2615GG40JA 8710364054220


DREMEL VersaTip

Examples of usage

SolderingFor solderingelectronic parts ofyour computer/remote control modelcars/planes etc.

Hot cuttingMake a clean cut inwood

WoodburningCreate beautifuldecorations in wood

MeltingIn order to easilybend materials heatup your project withyour Dremel VersaTip

ShrinkingFor effectiveshrinking of cablesfrom your computeror anywhere else

Paint RemovingEasily remove paintsfrom small areas withprecision

The cordless 6 in one gas-torch. The perfect tool forsoldering, melting, shrinking,pyrography, hot cutting &paint removing. The onlysoldering iron that combinesa multitude of applications inone tool, thanks to its abilityto use 6 interchangeabletips.


Versatileone tool for 6 different applications

Powered by liquid butane gasuse anytime anywhere

Very short heat-up time and quickrechargealways ready to use

Child safety lock mechanismchildren cant turn on the tool

Preciseallows for detailed and intricate work

Durable qualitylong lifetime

Variable temperature settingselect the right temperature for your project


Weight 0,135 kgIgnition PizoBurn time 90 min

105

DREMEL VersaTip (2000-6)


Contents


Dremel VersaTipSoldering TipCutting KnifeHot KnifeFlat Wide Flame HeadReflectorHot Blower HeadSoldering Tin with Blue CapSoldering Sponge + sponge boxInstruction manualTin storage case




1. Butane Tool Accessories

201 202 203

201: Soldering Tips. For the Dremel VersaTip 2000 and the VersaFlame 2200.202: Cutting knives. For the Dremel VersaTip 2000. 203: Shaping knives. For theDremel VersaTip 2000.

Model Quantity Ordernumber EAN

201 2 26150201JA 8710364039708202 2 26150202JA 8710364049400203 2 26150203JA 8710364049394

2. Dremel Versatip Pyrography Accessories Set (204)

204

These new Dremel pyrography accessories are used to apply differentpyrography motifs onto wood and leather. The set includes four tips withdifferent shapes: ball point, oval, sharp point and pattern. Applications includedrawing, shading, striping, etc. All tips are to be used with the Dremel Versatip.


204 4 26150204JA 8710364057603

107

DREMEL VersaFlame


Weight 0,227 kgTank capacity 42ml / 22gIgnition PizoBurn time 75 minTemperature 1200C (open air)680 -

1000C (hot air)550C(tips)

The Dremel VersaFlame is the onlystationary burner that safely combinesopen flame use with a catalyst andsoldering head, making it the mostversatile stationary burner in the markettoday, especially for DIY applications. TheDremel VersaFlame is powered by liquidbutane gas for quick heat-up and fastrecharge. Applications for use include:soldering, shrinking, welding, etc.


Tank capacity of 22 gramsLonger use; full tank lasts up to 75 min atmaximum capacity

Child safety lock mechanismChildren can't turn on the tool

Flame lock buttonFor continuous hands-free use

Stationary useBy attaching removable foot

Precise flameAllows for detailed open flame work

Powered by liquid butane gasUse anytime anywhere

Very short heat-up time and quickrechargeAlways ready to use

Durable qualityLong lifetime

Variable temperature settingSelect the right temperature for your project


DREMEL VersaFlame (2200-4)


Contents


Dremel VersaFlameCatalystSoldering tipFlame extension pieceDeflectorSoldering tin with blue capSoldering sponge + sponge boxInstruction manualTin storage case


109


1. Butane Tool Accessories

201

201: Soldering Tips. For the Dremel VersaTip 2000 and the VersaFlame 2200.


201 2 26150201JA 8710364039708


DREMEL Engraver


Weight 0,31 kgVoltage 230 VStrokes per minute 6000Rated power input 35 W

Engrave or decorate a wide variety ofmaterials like, metal, plastic, glass,ceramic, wood and leather.Including a letter & number template foreasy engraving of letters & numbers.


Reciprocating actionfor optimal engraving control

Variable stroke depthfor various engraving effect

Soft gripfor comfortable handling

Replaceable carbidefor use on a wide variety of materials

Seperate on/off switchto keep depth setting

111

DREMEL Engraver (290-1)

Engraving tool with variable depth control,for engraving on a wide variety of materialslike metal, glass, wood, plastics, ceramics,etc.This kit also includes a letter & numbertemplate for easy engraving of letters &numbers.

Contents

Order information Ordernumber: F0130290JM EAN: 8710364046850

Dremel EngraverReplaceable carbide engraving pointCreative engraving templatesInstruction manual



Engraver Accessories

1. Engraver Accessories

9924 9929

Carbide engraving tips and Diamond Engraving Point. For usage with the DremelEngraver 290. The Diamond Engraving Point 9929 has a longer lifespan and isfor use on harder materials such as glass.


9924 3 26159924JA 87103640396929929 1 26159929JA 8710364042906

115

Benchtop Tool System

The Benchtop Tool System consists of tools especially designed for stationary use.

Moto-SawSystem

DREMEL Moto-SawMoto-Saw Accessories

Fortiflex System DREMEL FortiflexFortiflex Attachments


DREMEL Moto-Saw


Weight 1,10 kgNo load speed 1.500 - 2.250 1/minVoltage 220 - 240 VRated power input 70 W

The Dremel Moto-Saw is a compact andeasy-to-use scroll saw for making detailedcuts in different materials. With its range ofdifferent saw blades, the Dremel Moto-Saw can handle many different materialseasily. Thanks to its detachable fretsaw, itcan be used not only stationary but in-hand anywhere. This userfriendly scrollsaw is not only easy to store and set-up,but also easy to operate. The DremelMoto-Saw is the most user-friendly scrollsaw.


Easy to usequick accessory change combined witheffortless set-up and storage due to itscompact size.

Dual functioningstationary mode for precision work andhandheld mode for larger work pieces.

Reduced vibrationhold down foot.

Precise straight cutsguide rails and parallel guide to assist cuttingup to 18 mm.

Match speed to project at handFull variable speed control (1.500-2.250RPM).

117

DREMEL Moto-Saw (MS20-1/5)


Contents

Order information Ordernumber: F013MS20JA EAN: 8710364062775

Dremel Moto-Saw2x General Purpose Wood Cutting Saw Blade(MS51)2x Fine Wood Cutting Saw Blade (MS52)1 x Metal Cutting Saw Blade (MS53)Parallel Guide attachmentInstruction manualSturdy and spacious storage case


Cutting

MS51(2) MS53 MS52(2)


Moto-Saw Accessories

Date post:	13-Sep-2015
Category:	Documents
Upload:	azukick
View:	58 times
Download:	5 times

Dremel Catalogue 2014-2015

Documents