1
Drive DeVilbiss Community Bed’s
www.drivedevilbiss.co.uk
2
Introduction
The Casa Beds from Drive Devilbiss Healthcare have been designed so that they can be assembled by one person under 10 minutes.No tools are required for assembly. These high quality, functional beds are assembled in the UK to ensure strict adherence to quality standards.
The beds are CE marked to current EU medical directive standards and are easy to clean and disinfect, therefore, reducing the risk of cross-contamination.
All beds, spare parts and accessories can be delivered on a next day service.
Contents
Casa Nouva 4 Bed04 - 07
Accessories12 - 15
Casa Med Bariatric Beds08 - 11
4 5
Casa Nuova 4
“Easily assembled in under 10 minutes!”
The Casa Nuova 4 bed is robust and long lasting. No tools are required to assemble this bed, which can be done by one person in under 10 minutes.
This four section fully profiling bed has an electric backrest, leg rest, knee brake & lower leg elevation, enabling Carers/Nurses to offer the best care/nursing practice.
» Quick release pins on all actuators, together with emergency lowering » Dewert control system is
IP44 & IP66 rated » Mattress allowance 16cm, 33cm
when using a high rail » Easy to clean & disinfect » Next day delivery including spare parts » Warranty - 3 years (10 years on metal
steel tube mattress supports) » Wide range of accessories » Bed installation & fault finding training
course free of charge
» Tool free assembly » Assembly time under 10 minutes » Available in 2 height adjustments:
Standard 40-80cm or Low 23-63cm » With or without integral side rails » Choice of 3 mattress supports:
Metal mesh, metal steel tube or metal steel tube with pre-assembled actuators » Choice of 3 handsets: 8 button
(high/low), 9 button (reverse trendelenburg), 10 button (full trendelenburg)
Casa Nuova 4 Low - Height Adjustment 23-63cmImage shown with metal mesh mattress support
Casa Nuova 4 - Height Adjustment 40-80cmImage shown with metal steel tube mattress support
PRODUCT EXTERNAL DIMENSIONS MATTRESS PLATFORM HIEGHT ADJUSTMENT BACKREST ANGLE FOOTREST ANGLE CASTORS MAX USER WEIGHT MAX LOAD
Casa Nouva 4 213 x 102cm 198 x 89cm 23 - 63cm or 40 - 80cm 0 - 70° 0 - 20° 10 cm (Standard Height Beds) or 5 cm Double (Low Beds) 180kg (28st) 200kg (32st)
6 7
Casa Nuova 4 Positioning Casa Nuova 4 Configurations
CODE HEIGHT ADJ. MATTRESS SUPPORT SIDE RAILS HANDSET BATTERY BACKUP
220010BE 40 - 80cm Mesh X 8 X
220011BE 23 - 63cm Mesh X 8 X
220013BE 40 - 80cm Mesh X 9 X
220014BE 23 - 63cm Mesh X 9 X
220015BE 40 - 80cm Mesh X 10 X
220016BE 23 - 63cm Mesh X 10 X
220015BATBE 40 - 80cm Mesh X 10 ✓
220016BATBE 23 - 63cm Mesh X 10 ✓
220017BE 40 - 80cm Mesh ✓ 8 X
220018BE 23 - 63cm Mesh ✓ 8 X
220019BE 40 - 80cm Mesh ✓ 9 X
220020BE 23 - 63cm Mesh ✓ 9 X
22002BE 40 - 80cm Metal Steel Tube X 8 X
22003BE 23 - 63cm Metal Steel Tube X 8 X
220021BE 40 - 80cm Metal Steel Tube X 9 X
220022BE 23 - 63cm Metal Steel Tube X 9 X
22006BE 40 - 80cm Metal Steel Tube ✓ 8 X
22007BE 23 - 63cm Metal Steel Tube ✓ 8 X
220023BE 40 - 80cm Metal Steel Tube ✓ 9 X
220024BE 23 - 63cm Metal Steel Tube ✓ 9 X
22027BE 40 - 80cm Metal Steel Tube c/w pre-assembled actuators X 8 X
22028BE 23 - 63cm Metal Steel Tube c/w pre-assembled actuators X 8 X
22000BE 40 - 80cm Metal Steel Tube c/w pre-assembled actuators X 9 X
22001BE 23 - 63cm Metal Steel Tube c/w pre-assembled actuators X 9 X
22040BE 40 - 80cm Metal Steel Tube c/w pre-assembled actuators ✓ 8 X
22041BE 23 - 63cm Metal Steel Tube c/w pre-assembled actuators ✓ 8 X
21997BE 40 - 80cm Metal Steel Tube c/w pre-assembled actuators ✓ 9 X
21998BE 23 - 63cm Metal Steel Tube c/w pre-assembled actuators ✓ 9 X
21997TBE 40 - 80cm Metal Steel Tube c/w pre-assembled actuators ✓ 10 X
21998TBE 23 - 63cm Metal Steel Tube c/w pre-assembled actuators ✓ 10 X
Full trendelenburg
tilt function(10 button handset)
Reverse trendelenburg
tilt function (9 button handset)
All beds are assembled in our factory at Bridgend, South Wales, which enables us to offer our Customers the exact choice of bed they require. Therefore, if your choice of bed is not listed above, please let us know and we will build a bed to your exact specifications.
Profiled showing
knee-brake
8 9
Bariatric Beds
“Now available in four wooden finishes”
The Bariatric Nuova 120cm wide fully profiling 4 section bed is manufactured from powder coated steel and has a robust metal steel tube mattress support.
» Choice of 2 height adjustments » Wooden or metal integral side rails » 9 button handset (reverse
trendelenburg) as standard » 4 section fully function nursing bed » Robust metal steel tube
mattress support » Tool free assembly » Grab Bar can be used in conjunction
with integral metal side rails » Our Bariatric Beds are now
available in 3 additional colours: Maple, Oak or Walnut » Patient helper to aid
manoeuvrability can be fitted to either side of the head end
FFCB160BE High Risk Mattress
PRODUCT MATTRESS SUPPORT HEIGHT MATTRESS SUPPORT DIMENSIONS OUTER DIMENSIONS HEADREST ANGLE FOOTREST ANGLE MAX USER WEIGHT MAX LOAD
Bariatric Beds 24 - 64cm or 40 - 80cm 200 x 120cm 215 x 125cm 0 - 70° 0 - 20° 286kg (45st) 317kg (50st)
Colour Options
MapleBeech Oak Walnut
FS headboard / footboard with metal rails
FS headboard / footboard with wooden rails
1011
Bariatric Beds Configurations
CODE HEIGHT ADJ. WOOD HEADBOARDS SIDE RAILS
21990BULTRABE 40 - 80cm Beech Ultra (exposed actuators) Metal
21991BULTRABE 24 - 64cm Beech Ultra (exposed actuators) Metal
21990BULTRAWBE 40 - 80cm Beech Ultra (exposed actuators) Wood
21991BULTRAWBE 24 - 64cm Beech Ultra (exposed actuators) Wood
21990BFSBE 40 - 80cm Beech FS (enclosed actuators) Metal
21991BFSBE 24 - 64cm Beech FS (enclosed actuators) Metal
21990BFSWBE 40 - 80cm Beech FS (enclosed actuators) Wood
21991BFSWBE 24 - 64cm Beech FS (enclosed actuators) Wood
21990BFSC4BE 40 - 80cm Maple FS (enclosed actuators) Metal
21991BFSC4BE 24 - 64cm Maple FS (enclosed actuators) Metal
21990BFSWC4BE 40 - 80cm Maple FS (enclosed actuators) Wood
21991BFSWC4BE 24 - 64cm Maple FS (enclosed actuators) Wood
21990BFSC5BE 40 - 80cm Walnut FS (enclosed actuators) Metal
21991BFSC5BE 24 - 64cm Walnut FS (enclosed actuators) Metal
21990BFSWC5BE 40 - 80cm Walnut FS (enclosed actuators) Wood
21991BFSWC5BE 24 - 64cm Walnut FS (enclosed actuators) Wood
21990BFSC6BE 40 - 80cm Oak FS (enclosed actuators) Metal
21991BFSC6BE 24 - 64cm Oak FS (enclosed actuators) Metal
21990BFSWC6BE 40 - 80cm Oak FS (enclosed actuators) Wood
21991BFSWC6BE 24 - 64cm Oak FS (enclosed actuators) Wood
All Casa Beds comply to BS EN 60601-2-52: 2010 and are assembled in the UK to ensure strict adherence to Quality Control Standards.
All Casa Med beds can be supplied with an optional bed extension, which extends the bed by 22cm. The extension bracket fits to the foot section, while the mattress infill and longer side rails ensure a safe caring environment.
1. BED EXTENSION » Enables a profiling bed to
be extended by 22cm/9" » Fits users between 6'5" – 7'1"
(196 – 216cm) in height » Fitted to the foot section of the bed » Extension is 22cm (8.5")
CODES: 21804BE (STANDARD 90CM WIDE BEDS) 21804BBE (BARIATRIC 120CM WIDE BEDS)
2. MATTRESS INFILL » Added on top of the extension bracket
to cover the additional metal frame » Can be wiped clean » Has a sewn zip cover
over foam extension » 16cm (6") in depth
CODES: CX66BE (90CM WIDE BEDS) FFC66B160BE (120CM WIDE BEDS)
3. TRANSPORT SECTION » All Casa Nuova 4 Beds are supplied
on transport sections » The wider transport sections have
brackets, enabling them to be stored under the bed when not in use CODE: 16105CN3BE
4. PATIENT HELPER » Can be fitted to either side
of the headboard on both the Casa Nuova 4 and Bariatric Bed » Offers additional positioning
for lying or sitting in bed » Adjustable height strap » Moulded plastic handgrip
CODES: 21873BE (INTEGRAL) 21874BE (FREE STANDING)
3
2
4
1
Image shown above of 16105CN3BE Transport section fitted under bed for storage, after bed assembly has taken place
Image shown above with pre-assembled actuators
Accessories for Casa Nuova 4 and Bariatric Beds
1213
Accessories for Casa Nuova 4 and Bariatric Beds
1. METAL INTEGRAL SIDE RAILS CODE: 24875BE
2. EXTRA HIGH SIDE RAILS CODE: 33645BE
3. TELESCOPIC EXTRA LONG SIDE RAILS CODE: 41622BE
4. MESH BUMPERS » Available in 3 different sizes:
Standard, High and Extra Long CODES: 874MBE (STANDARD) 874MHBE (HIGH) 874MXBE (EXTRA LONG)
5. PADDED BUMPERS » Available in 3 different sizes:
Standard, High and Extra Long CODES: 878BE (STANDARD) 878HBE (HIGH) 878XBE (EXTRA LONG)
6. GRAB BAR » Grab bar fits to both Casa Nuova 4
& Bariatric Bed & can be used in conjunction with integral side rails » 50cm height
CODE: 10CGRBE
7. BED LOOP » Offers additional support when
getting into and out of bed » Can be used alongside other aids to
provide additional positioning support » Easily secured using two hand knobs
CODES: 9CGRBE (38CM) 9CGRLBE (60CM)
8. I.V. POLE » IntraVenous Pole used to hang
fluid bags containing essential liquid substances being administered intravenously to the patients » Height adjustable 102 - 178cm » Max load 10kg
CODE: 21878BE
1 5
4
2 6
3 7 8
14
This mattress is an ideal replacement for existing high risk mattresses. The Geltex layer combines breathability, pressure distribution and body support in a way you don’t get with other materials due to its unique gel properties.
The waterproof, permeable cover can be easily wiped clean, removed and laundered.
This mattress is an ideal aid when used as part of a pressure ulcer prevention programme. It is general purpose replacement mattress proven in countless care institutions across the UK.
The waterproof, permeable cover can be easily wiped clean, removed and laundered.
This mattress is a general purpose replacement mattress with the benefits of a removable and washable PU cover.
The waterproof, permeable cover can be easily wiped clean, removed and laundered.
15
Mattresses For Domestic, Care Home & Nursing Home Use
CODE MAT10BE
DESCRIPTION Entry level castellated foam mattress
RISK LEVEL Medium
WATERLOW SCORE 10
SPECIFICATION 198 x 90 x 12.7cm
FOAM Single piece SB30/125 profiled one side, severe rated foam
FIRE RETARDANCY BS7177:2008 medium hazard
COVER Dark green, 2 way stretch, PU coated
SEAM Sewn with zip closure
VAPOUR PERMEABLE ✓
WATERPROOF ✓
WEIGHT 8.5 Kg
WEIGHT LIMIT 187.2 Kg
WARRANTY 1 year
CODE MAT20BE
DESCRIPTION Superior graded castellated foam mattress
RISK LEVEL High
WATERLOW SCORE 15
SPECIFICATION 198 x 90 x 15.2cm
FOAM Single piece SB33/120 profiled one side, additional durability, severe rated foam
FIRE RETARDANCY BS7177:2008 medium hazard
COVER Dark green, 2 way stretch, PU coated
SEAM Sewn with zip closure
VAPOUR PERMEABLE ✓
WATERPROOF ✓
WEIGHT 11 Kg
WEIGHT LIMIT 200.6 Kg
WARRANTY 1 year
CODE MAT30BE
DESCRIPTION Geltex Mattress
RISK LEVEL High / Very High
WATERLOW SCORE 20
SPECIFICATION 198 x 90 x 15.2cm
FOAM SB40/170 base, GELTEX inside top layer, severe rated foam
FIRE RETARDANCY BS7177:2008 medium hazard
COVER Dark green, 2 way stretch, PU coated
SEAM Sewn with zip closure
VAPOUR PERMEABLE ✓
WATERPROOF ✓
WEIGHT 15 Kg
WEIGHT LIMIT 251.8 Kg
WARRANTY 1 year
MAT10BE MAT20BE MAT30BE
16
Leaflet Code: LL240For more information contact your local dealer:
All sizes and weights stated are nominal. All errors and omissions excepted. Due to the limitations of photography and the printing process colours shown may not be 100% accurate. *All equipment should be used in conjunction with clinical judgement and assessments dependent on individual patient morphology.
www.drivedevilbiss.co.uk