800 • 521 • 9520 mscmetalworking • com CAP 1000T Vending System The CAP 1000T vending system provides breakthrough productivity improvements and lowers the overall tooling spend. Reliable, Simple & Quick! • Multi-access drawer modules • High storage capacity with minimal footprint • 24/7 secure access • Touchscreen interface • Emergency override in case of power failure • Modular design / easily configurable • Expandable add-on units • Comprehensive reporting • Automated replenishment Combine the vending solutions that best accommodate your tooling. Towers and Modified Cabinets Lockers Rotary Type Crib Software 800 • 521 • 9520 mscmetalworking • com 800 • 521 • 9520 mscmetalworking • com 800 • 521 • 9520 mscmetalworking • com 800 • 521 • 9520 mscdirect • com much more than simple vending. . . Driven By
Transcript
800•521•9520mscmetalworking•com
CAP 1000TVending System
The CAP 1000T vending system provides breakthroughproductivity improvements and lowers the overall tooling spend.
Reliable, Simple & Quick! • Multi-access drawer modules • High storage capacity with minimal footprint• 24/7 secure access• Touchscreen interface• Emergency override in case of power failure • Modular design / easily configurable• Expandable add-on units• Comprehensive reporting• Automated replenishment
Combine the vending solutions that best accommodate your tooling.
Z Drawer – Single level tall. Perfect for small items such asinserts. Up to 12 compartmentsmeasuring 1″ x 1″ x 2.5″.
A Drawer – Single level tall. Perfect for medium-length endmills under 1″ dia. Up to 12compartments measuring 1″ x 1″ x 3.8″.
C Drawer – Single level tall.Will accommodate longer tools,such as drills and extended-length end mills under 1″ dia.Up to 12 compartmentsmeasuring 1″ x 1″ x 6.5″.
Double A Drawer – Single leveltall. Will accommodate one longer(up to 9.8″) and one reduced-length tool (up to 3.8″) in up to 12 compartments.
B Drawer – 2 levels tall and up to12 compartments deep. Perfectfor larger diameter (under 2″),shorter items.
Twin Module – 1.5 levels tall andup to 12 compartments deep. Offered in a wide array of drawersizes to accommodate itemsunder 1.5″ diameter.
T4 Cupboard – Can be securedfor excess or overstock.
Double B – 2 levels tall. Can accommodate one longer, one shorter item such as safety glasses and gloves.
D Drawer – 2 levels tall.Typically used for a bulky item such as safety glasses.
T6 Cupboard – Typically used foroverstock or bulk item control.
F Drawer – 2 levels tall. Can accommodate larger diameter,longer tools.
G Drawer – 3 levels tall. Typicaluse is for larger items such ashand or pneumatic tools.
J Drawer – 4 levels tall. Typicaluse is for abrasive wheels.
CAP 1000TVending System
800•521•9520mscmetalworking•com
Modular design can also be reconfigured as needs change!
Drawer Sizes• 11 different types of drawer trays are available • Multiple levels (heights) available• Vertical or slanted drawer dividers available• Each drawer is 13.5 in. deep • Up to 12 compartments per drawer• Each drawer allows for individual access• Cupboards available for bulk storage• Customizable to your unique and changing needs
800•521•9520mscmetalworking•com
Z Z Z ZA A A
AA
B B B
C
D D
E
F
G
H
J J
C
A
Drawer No. of Internal Width Internal Height No. of Tray Drawers Levels (mm) (inch) (mm) (inch) Compartments
Drawers are supported on roller-bearing runners with a maximum weight capacity for Z, A, AA, B, C, D and E of 44 lbs. and F,G, H and J of 75 lbs. per drawer.
CAPWare software provides full inventory managementwith complete control, reordering, audit trail and reportingcapability and is ready to connect to your network foranalysis and management of your crib activity.
Stock Management • Supports tool crib management functions includingissue and return, swap, reworking and scrap, inventoryadjustment, move stock and kit issue
• Tracks the location of items by six different user- defined criteria, such as machine, job and user, forcomplete analysis
• Manages both expendable and non-perishable items by controlling the issue and return of new, used, and reworked items
• Enforces limits by employee and other criteria, such as machine and job
• Prints tickets for transaction records or receipts • Maximizes efficiency through touchscreens• Accommodates graphics and hyperlinks at item level• Contains functionality for shopping cart and recentlyused items
Rework and Scrap Management
Manages the full rework cycle and the scrapping of tools at end-of-life:• The return of used items needing rework • Stock waiting to be picked up for rework• The return process of reworked items• Stock in rework • Provides reporting on the rework and scrap processes
Batch and Expiration Control• Controls batch-numbered items and items with expiration dates
• Provides audit trail of all item activity
Comprehensive Reporting • Comprehensive suite of standard and customizable reports • System dashboard for quick status view • Reports generated and transmitted automatically or manually; canbe exported, saved and/or transmitted in many standard formats
Replenishing and Reordering• Replenishment orders can be generated manually or automaticallyand then electronically transmitted
• Receiving and restocking are controlled by the software and alltransactions are recorded by the software
Multiple Vending System and Tool CribManagement and Consolidation • Multiple CAP vending machines and tool cribs are controlled within a single database with common software
• Common object creation for all points of use; Individual minimum,maximum, stock levels, etc., for each point of use
• Consolidated and individual ordering for all points of use; reportingby both consolidated and individual point of use
Complete Support and Utility Software • Complete database import and export functionality • Interfaces to external systems, Access or SQL Server databases • Barcode capability • Mass update functions• Automatic backup capability
Searching and Selection • Easy-to-use search functions, including graphics, images and catalogs
CAPWare software provides full inventory managementwith complete control, reordering, audit trail and reportingcapability and is ready to connect to your network foranalysis and management of your crib activity.
Stock Management
• Supports tool crib management functions includingissue and return, swap, reworking and scrap, inventoryadjustment, move stock and kit issue
• Tracks the location of items by six different user- defined criteria, such as machine, job and user, forcomplete analysis
• Manages both expendable and non-perishable items by controlling the issue and return of new, used, and reworked items
• Enforces limits by employee and other criteria, such as machine and job
• Prints tickets for transaction records or receipts • Maximizes efficiency through touchscreens• Accommodates graphics and hyperlinks at item level• Contains functionality for shopping cart and recentlyused items
Rework and Scrap Management
Manages the full rework cycle and the scrapping of tools at end-of-life:• The return of used items needing rework • Stock waiting to be picked up for rework• The return process of reworked items• Stock in rework • Provides reporting on the rework and scrap processes
Batch and Expiration Control
• Controls batch-numbered items and items with expiration dates
• Provides audit trail of all item activity
Comprehensive Reporting
• Comprehensive suite of standard and customizable reports • System dashboard for quick status view • Reports generated and transmitted automatically or manually; canbe exported, saved and/or transmitted in many standard formats
Replenishing and Reordering
• Replenishment orders can be generated manually or automaticallyand then electronically transmitted
• Receiving and restocking are controlled by the software and alltransactions are recorded by the software
Multiple Vending System and Tool Crib
Management and Consolidation
• Multiple CAP vending machines and tool cribs are controlled within a single database with common software
• Common object creation for all points of use; individual minimum,maximum, stock levels, etc., for each point of use
• Consolidated and individual ordering for all points of use; reportingby both consolidated and individual point of use
Complete Support and Utility Software
• Complete database import and export functionality • Interfaces to external systems, Access or SQL Server databases • Barcode capability • Mass update functions• Automatic backup capability
Searching and Selection
• Easy-to-use search functions, including graphics, images and catalogs
800•521•9520mscdirect•com
Driven By
much more than simple vending. . .
800•521•9520mscmetalworking•com
CAP 5000TCarousel-Type Vending Machine
The CAP 5000T carousel-type vending units are an idealsolution to securely manage a large number of differentitems in a limited space and, when used in conjunctionwith our CAP 1000T Tool Management Towers, can satisfyyour metalworking and non-metalworking needs.
Versatile Item Management
• Provides 468 secure locations
- Single item dispense - Multiple quantity dispense (semi-secure)- Lock down by expiration date
CAPWare Software provides full inventory managementwith complete control, reordering, audit trail and reportingcapability and is ready to connect to your network foranalysis and management of your inventory activity.
Stock Management
Supports tool inventory management functions includingissue and return, swap, reworking and scrap, inventoryadjustment, move stock and kit issue.
Tracks the location of items by six different user- defined criteria, such as machine, job and user, for complete analysis.
Enforces limits by employee and other criteria, such as machine and job.
Contains functionality for shopping cart and recently used items.
Rework and Scrap Management
Manages the full rework cycle and the scrapping of tools at end-of-life:
• The return of used items needing rework • Stock waiting to be picked up for rework• The return process of reworked items• Stock in rework • Provides reporting on the rework and scrap processes
Batch and Expiration Control
Controls batch-numbered items and items with expiration dates. Provides audit trail of all item activity.
800•521•9520mscmetalworking•com
Searching and Selection
Easy-to-use search functions, including graphics, images and catalogs.
Comprehensive Reporting
Comprehensive suite of standard and customizable reports. System Dashboard for quick status view.
Reports generated and transmitted automatically or manually; can be exported, saved and/or transmitted in many standard formats.
Replenishing and Reordering
Replenishment orders can be generated manually or automaticallyand then electronically transmitted.
Receiving and restocking are controlled by the software and all transactions are recorded by the software.
Multiple Vending System and Consolidation
Multiple CAP vending machines can be controlled within a singledatabase with the common software.
Consolidated and individual ordering for all points of use;reporting by both consolidated and individual point of use.
Complete Support and Utility Software
Complete database import and export functionality.
• Access or SQL Server databases • Mass update functions• Automatic backup capability
The CAP 600C Electronically Controlled Tool Cabinet is anideal solution to manage a large number of different itemsin a limited space and, when used in conjunction with ourCAP Dispensing Units, can satisfy your metalworking andnon-metalworking needs.
Versatile Item Management
• Allows 24/7 access
• Provides countless configurations
• Uses industry standard cabinets
• Offers low to high security
• Accommodates any number of items
- Metalworking- Safety and MRO Items- Gauging and Measuring Items
CAPWare Software provides full inventory managementwith complete control, reordering, audit trail and reportingcapability and is ready to connect to your network foranalysis and management of your inventory activity.
Stock Management
Supports tool inventory management functions includingissue and return, swap, reworking and scrap, inventoryadjustment, move stock and kit issue.
Tracks the location of items by six different user- defined criteria, such as machine, job and user, for complete analysis.
Enforces limits by employee and other criteria, such as machine and job.
Contains functionality for shopping cart and recently used items.
Rework and Scrap Management
Manages the full rework cycle and the scrapping of tools at end-of-life:
• The return of used items needing rework • Stock waiting to be picked up for rework• The return process of reworked items• Stock in rework • Provides reporting on the rework and scrap processes
Batch and Expiration Control
Controls batch-numbered items and items with expiration dates. Provides audit trail of all item activity.
800•521•9520mscmetalworking•com
Searching and Selection
Easy-to-use search functions, including graphics, images and catalogs.
Comprehensive Reporting
Comprehensive suite of standard and customizable reports. System Dashboard for quick status view.
Reports generated and transmitted automatically or manually; can be exported, saved and/or transmitted in many standard formats.
Replenishing and Reordering
Replenishment orders can be generated manually or automaticallyand then electronically transmitted.
Receiving and restocking are controlled by the software and all transactions are recorded by the software.
Multiple Vending System and Consolidation
Multiple CAP vending machines can be controlled within a singledatabase with the common software.
Consolidated and individual ordering for all points of use;reporting by both consolidated and individual point of use.
Complete Support and Utility Software
Complete database import and export functionality.
• Access or SQL Server databases • Mass update functions• Automatic backup capability
The CAP 600C Electronically Controlled Tool Cabinet is anideal solution to manage a large number of different itemsin a limited space and, when used in conjunction with ourCAP Dispensing Units, can satisfy your metalworking andnon-metalworking needs.
Versatile Item Management
• Allows 24/7 access
• Provides countless configurations
• Uses industry standard cabinets
• Offers low to high security
• Accommodates any number of items
- Metalworking- Safety and MRO Items- Gauging and Measuring Items
CAPWare Software provides full inventory managementwith complete control, reordering, audit trail and reportingcapability and is ready to connect to your network foranalysis and management of your inventory activity.
Stock Management
Supports tool inventory management functions includingissue and return, swap, reworking and scrap, inventoryadjustment, move stock and kit issue.
Tracks the location of items by six different user- defined criteria, such as machine, job and user, for complete analysis.
Enforces limits by employee and other criteria, such as machine and job.
Contains functionality for shopping cart and recently used items.
Rework and Scrap Management
Manages the full rework cycle and the scrapping of tools at end-of-life:
• The return of used items needing rework • Stock waiting to be picked up for rework• The return process of reworked items• Stock in rework • Provides reporting on the rework and scrap processes
Batch and Expiration Control
Controls batch-numbered items and items with expiration dates. Provides audit trail of all item activity.
800•521•9520mscmetalworking•com
Searching and Selection
Easy-to-use search functions, including graphics, images and catalogs.
Comprehensive Reporting
Comprehensive suite of standard and customizable reports. System Dashboard for quick status view.
Reports generated and transmitted automatically or manually; can be exported, saved and/or transmitted in many standard formats.
Replenishing and Reordering
Replenishment orders can be generated manually or automaticallyand then electronically transmitted.
Receiving and restocking are controlled by the software and all transactions are recorded by the software.
Multiple Vending System and Consolidation
Multiple CAP vending machines can be controlled within a singledatabase with the common software.
Consolidated and individual ordering for all points of use;reporting by both consolidated and individual point of use.
Complete Support and Utility Software
Complete database import and export functionality.
• Access or SQL Server databases • Mass update functions• Automatic backup capability
A compliment of full- and mixed-security drawers provides theability to control products requiring different levels of securestorage using industry-proven solutions.
The 800DS vending system includes dual-security and is ideal foreasy deployment away from or in the absence of main tool cribs.
The 800DS provides the benefits that you’ve come to expect from a premier vending solution:
• Automated replenishment
• 24/7 system access through the web
• Consolidated or individual point-of-use reporting
• Time-tested and proven technology
• Item selection using lists OR graphic images
MSC Industrial Vending: 800DS
Dual-Security Vending
mscdirect•com800•521•9520
Web Based Software provides comprehensive inventory management with complete change management, reordering, audit trail and reporting capabilities through a web-hosted database. The unit is controlled by a powerful microprocessor that transmits and receives all necessary information to and from the database hosted in a cloud server. Simply connect to the Internet via any web browser for system access and configuration changes, reporting and ordering can be done anywhere, anytime.
Stock Management
• Supports tool inventory management functions including issueand return, inventory adjustments, and cycle counts.
• Tracks the location of items by machine, job, and user. • Provides audit trail of all item activity.
Searching and Selection
• Item selection using graphics/images or descriptions.
Replenishing and Reordering
• Replenishment orders generated automatically and electronically transmitted.• Receipt and restock transactions are recorded by the software.
Comprehensive Reporting
• Comprehensive suite of standard and customizable reports; quick status view from the system dashboard.
• Reporting for MSC vending machines can be at the consolidatedor individual point-of-use level.
• Reports generated and transmitted automatically or manually;can be exported, saved and/or transmitted in many standardformats including, but not limited to, Excel, Tab Delimited,Rich Text, and XML.
Support and Utility Software
• Database import and export functionality.
• Mass update functions.• Automatic backup capability.
Drawer Specifications
Full Security: Single Item/Single Dispense access capability
(the top unit)
• 3 different tray widths to choose from • Can have 1, 2, 3, 4, 6, or 12 compartments per drawer
Mixed Security: Mix of Items/Multiple Dispense access
(the bottom tooling cabinet)
• 7 medium security drawers• Internal drawer dimensions:(Maximum 48 compartments per drawer)-Six (6) drawers: 24ʺW x 3.0ʺH x 24ʺD-One (1) drawer: 24ʺW x 5.0ʺH x 24ʺD
*Based on maximum of 12 compartments/drawer
No. of Individual CompartmentDrawer Drawers Dimensions*Tray Across W x H x D (inches)Z 4 2.5 x 0.9 x 1.0A 3 3.8 x 0.9 x 1.0C 2 6.5 x 0.9 x 1.0
Connectivity Requirements
• A dedicated Ethernet connection.• A secure Internet connection.• Adobe Acrobat Reader version 4.0 or higher.
