DRIVING GREATER SOLUTIONS
Online Diagnostic Services
NDT Services
Rope Access Services
Pipe Scan
Gamma Scan
Neutron Backscatter
Flooded Member Detection
Rope Access
Non Destructive Testing
Lifting Gear Inspection
Shipping and Harbors
Painting and Blasting
Positive Material Identification
Mechanical and Electrical
OUR Services
Bumi Saing Sdn Bhd
Bumi Saing Sdn Bhd was founded in Kuala Lumpur since 2008. The
inspiration at our inception was to provide exceptional customer
service to the process industry at a competitive price. This
remains a key component of our vision statement to this day.
Bumi Saing has now grown to offer our services globally on 6
continents. We have extraordinary local partners and outstanding
customers worldwide.
Mission Statement
Service that exceeds our customer’s expectations
Trusting relationships with our customers and partners
Leading edge technology for the industry
Health, safety, the environment and quality in all we do
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
Deposits and blockages inside your process piping can be
difficult and costly to locate. Bumi Saing personnel use
portable equipment to quickly and accurately determine the
location of deposits in above ground piping. Our technique
is non- invasive and can be used on almost any piping
contents.
Pipe Flow Solutions
Position and extent of solids
buildup
Hydrate location within gas lines
Asses liquid carryover in
separators
Monitor liquid / gas interface in
pipeline purge
Measure the extent and duration
of slugging
Locate lost refractory or lining
Determine deposit cross sectional
profiles
-2.32
7.68
17.68
27.68
37.68
47.68
57.68
67.68
77.68
87.68
97.68
1 7
13
19
25
31
37
43
49
55
61
67
73
79
85
91
97
10
3
10
9
11
5
12
1
12
7
13
3
Inte
rnal
Dia
me
ter
(cm
)
Scanning point
Sludge Thickness
Vertical Deposit Thickness
Horizontal Sludge Thickness
Distance between Point : 10cm
Jump Jump
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
Trayed Tower
Bumi Saing’s non-invasive Gamma Scan technique is used to
evaluate trayed columns for hydraulic performance and
mechanical integrity. This critical knowledge is needed to
optimize production and minimize plant downtime.
Immediate results delivered on site allow our customers to
implement the appropriate solutions to increase production,
reduce shut down time and lower their operating costs.
Verify tray placement or
damage
Determine froth height and
levels
Locate flooding and foaming
Diagnose entrainment and
weeping
Detect process related
problems
Gamma Scans have many uses including troubleshooting,
pre-shutdown planning, process optimization and
condition monitoring. Our team will work directly with
you to assess your unique situation.
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
Pack Beds Tower
Gamma Scan
Bumi Saing’s Grid Scan is one of the most cost effective ways to
identify maldistribution in packed towers. Using a geometric
pattern of scan orientations the density profiles will overlay with
an even flow distribution. If variations are detected between the
scans, then deviations are present in the liquid or vapour flow
pattern within the packing.
Verify the position of packed
beds
Evaluate the distribution of
liquid and vapour
Confirm distributors and
collector trays
Detect crushed and fouled
packing
Locate foaming and flooding
D
D
D D
D
D
D
D
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
Nu Scan
Level and Interface Measurements The neutron backscatter tool is a quick, accurate and cost effective
method of measuring liquid levels and interfaces inside process
vessels.
This highly portable non-invasive device measures differences in
hydrogen density of the fluids. Readings are taken from one side of
the vessel with results instantly available on site.
Interface measurements in
tanks
Froth heights in
downcomers
Levels on collector trays
Deposit and interfaces in
separators
Calibration of level gauges
Moisture under insulation
detection
Corrosion Under Insulation
CUI / MUI Determination
Moisture within insulation can be detected with the
NuScan equipment. Neutron Backscatter is a proven rapid
and effective technique for CUI or MUI inspection
technique. Wet sections of insulation are identified for
later removal and detailed inspection.
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
FMD & FMI
Flooded Member Inspections
performed by Bumi saing are quick
and non-invasive. The service may
be performed by remote operated
vehicle (ROV) or by a diver in shallow
water.
The FMD technique requires no
external preparation of the members
and works through tubular coatings
and marine growth.
The tubular support structure that holds up offshore
platforms needs to be inspected to minimize failures.
Inspections are carried out as part of a preventative
maintenance program or for insurance requirements.
Bumi Saing’s FMD technique is approved by DNV GL
as an accurate and reliable method of flooded
member detection.
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
Rope access is a form of work positioning, initially developed
from techniques used in climbing and caving, which applies prac-
tical rope work to allow workers to access difficult-to-reach lo-
cations without the use of scaffolding, cradles or an aerial work
platform. Rope access technicians descend, ascend, and trav-
erse ropes for access and work while suspended by their har-
ness. Some times a work seat may be used. The support of the
rope is intended to eliminate the likelihood of a fall altogether.
Rope access technicians use a back-up fall arrest system for the
unlikely failure of their primary means of support. This redundan-
cy system is usually achieved by using two ropes – a working line
and a safety line.
BENEFITS
Rope Access techniques provide a
cost effective alternative to traditional
access methods, such as scaffolding or
mobile elevated working platforms.
Using work positioning techniques,
Industrial Rope Access is a proven
method of achieving a safe work
position at height or in areas of
difficult access.
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
Non-destructive testing (NDT) is a
wide group of analysis tech-
niques used in industry to evaluate
the properties of a material,
component or system without causing
damage. The terms Non– destructive
examination (NDE), Non-destructive
evaluation (NDE), and Non - Destruc-
tive Inspection, are also commonly
used to describe this technology,
Because NDT does not permanently
alter the article being inspected, it is
a highly-valuable technique that can
save both money and time in product
evaluation, trouble shooting, and
research. Common NDT methods
Include ultrasonic, Magnetic-Particle,
liquid penetrant, Radiography Testing,
Eddy Current and Visual Inspection.
MT– Magnetic Particle Testing
PT - Penetrant Testing
RT - Radiography Testing
VT - Visual Testing
UT - Ultrasonic Thickness Measurement
ET - Eddy Current Testing
PMI - Positive Material Identification
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
We Inspect :
Lifting Gear
Slings
Shackles
Tirfors
Wire Rope
Trolley Beams
Life Boat Davits Chain
Cranes
Drilling Equipment
Derricks
Crown Blocks
Sheaves / Snatch Blocks
Deadline Anchors
Elevator
Bumi Saing accredited member of lifting Equipment En-
gineers Association (LEEA). The Lifting Equipment Engi-
neers Association (LEEA) is established across the globe as
the leading representative body for all those involved in
the lifting industry worldwide. Bumi Saing provide a com-
plete range of Lifting Gear Inspection in accordance with
LOLER, ensuring equipment integrity traceability and im-
proved HSE.
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
Industrial rope access is at home on unusual structures and
can achieve set-up and dismantling times that no other means
of access can match. It is for these reasons that IRATA com-
panies can often be found undertaking inspection and mainte-
nance work in the great ports of the world where an access
structure that prevents use of a crane or similar equipment
can be very disruptive. Again, because of its swift set-up and
removal times, such work can often be conducted by rope ac-
cess in a time scale that avoids any disruption to the normal
work within the area.
Harbours are often where large con-
structions are undertaken to support
the offshore sector and IRATA rope
access is noted for its works on der-
ricks and similar creations. Rope ac-
cess Can be found working on large
ships whilst they are in harbour with
painting and inspection work being
able to be carried out above the wa-
ter line whilst the vessel is in port,
and even between tides if this is a
factor. Additionally, the inspection
and repair of deep locks can also be
undertaken in quick time, thus mini-
mizing the time such a facility is out
of commission.
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
Bumi Saing, has been a pioneer in the field of Sand blasting and
Painting (Corrosion Control). We have served various corporate
companies nationally and internationally scattered in almost all
regions of Malaysia
Bumi Saing engaged in the inspection and Rope Access Services,
we‘ve expanded into the field of sandblasting and
painting .Toward the Era of Globalization , we have done a
renewal system in which the equipment and expertise of our staff
started on the increase . It also supports the process of our
performance as pioneer company Blasting & Painting in Malaysia
In tune with the objective to achieve the best results, prepare
Bumi Saing qualified human resources as well . For employment
ranging from field staff to the office staff and administration . We
always refer to the quality and reliability of human resources
through the calling process itself , the selection and detailed
testing .
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
Positive Material Identification (PMI) is the analysis of a
metallic alloy to establish composition by reading the
quantities by percentage of its constituent elements. Typical
methods for PMI include X-ray fluorescence (XRF) and optical
emission spectrometry (OES).
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
Bumi Saing began life as an Electrical Installer and start
Mechanical contraction. Since then, we has done Mechanical and
Electrical installation in different environment and fields in
hundreds of project. With that experiences, we are committed to
complete every task and challenge given and strive to complete
the project in the given timeframe.
Our solid Mechanical and Electrical team is divided into project
management, engineering, planning and controlling, to ensure all
the work meet the highest standard of installation and efficiency.
all joined together to make a strong team of Bumi Saing
Mechanical and Electrical division.
Recognizing that the quality of our service depends on prompt
action and fast response, we have implemented a very simple
organizational system so as to eliminate
bureaucracy and maintain our high levels of customer
service.
BUMI SAING SDN BHD
No 45 C, Jalan SG 3/10,
Taman Sri Gombak,
68100 Batu Caves, Selangor, Malaysia
CONTACT US
Contact us if you want to discuss how Bumi Saing Sdn Bhd can
help you improve your productivity by doing implementing our
services
+603-61851595